When the promiscuous mode is enabled on a VF, the IXGBE_VMOLR_VPE
bit (VLAN Promiscuous Enable) is set. This means that the VF will
receive packets whose VLAN is not the same than the VLAN of the VF.
For instance, in this situation:
┌────────┐ ┌────────┐ ┌────────┐
│ │ │ │ │ │
│ │ │ │ │ │
│ VF0├────┤VF1 VF2├────┤VF3 │
│ │ │ │ │ │
└────────┘ └────────┘ └────────┘
VM1 VM2 VM3
vf 0: vlan 1000
vf 1: vlan 1000
vf 2: vlan 1001
vf 3: vlan 1001
If we tcpdump on VF3, we see all the packets, even those transmitted
on vlan 1000.
This behavior prevents to bridge VF1 and VF2 in VM2, because it will
create a loop: packets transmitted on VF1 will be received by VF2 and
vice-versa, and bridged again through the software bridge.
This patch remove the activation of VLAN Promiscuous when a VF enables
the promiscuous mode. However, the IXGBE_VMOLR_UPE bit (Unicast
Promiscuous) is kept, so that a VF receives all packets that has the
same VLAN, whatever the destination MAC address.
Fixes: 8443c1a4b1 ("ixgbe, ixgbevf: Add new mbox API xcast mode")
Cc: stable@vger.kernel.org
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
After a VF requested to remove the promiscuous flag on an interface, the
broadcast packets are not received anymore. This breaks some protocols
like ARP.
In ixgbe_update_vf_xcast_mode(), we should keep the IXGBE_VMOLR_BAM
bit (Broadcast Accept) on promiscuous removal.
This flag is already set by default in ixgbe_set_vmolr() on VF reset.
Fixes: 8443c1a4b1 ("ixgbe, ixgbevf: Add new mbox API xcast mode")
Cc: stable@vger.kernel.org
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There are other methods of powering off machine than the reboot syscall.
Previously we missed to cover those methods and it created power-off
regression for some machines, like the PowerPC e500.
Fix this problem by moving the legacy sys-off handler registration to
the latest phase of power-off process and making the kernel_can_power_off()
check the legacy pm_power_off presence.
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppce500
Reported-by: Michael Ellerman <mpe@ellerman.id.au> # ppce500
Fixes: da007f171f ("kernel/reboot: Change registration order of legacy power-off handler")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a selftest that calls a global function with a context object parameter
from an freplace function to check that the program context type is
correctly converted to the freplace target when fetching the context type
from the kernel BTF.
v2:
- Trim includes
- Get rid of global function
- Use __noinline
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220606075253.28422-2-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier allows programs to call global functions as long as their
argument types match, using BTF to check the function arguments. One of the
allowed argument types to such global functions is PTR_TO_CTX; however the
check for this fails on BPF_PROG_TYPE_EXT functions because the verifier
uses the wrong type to fetch the vmlinux BTF ID for the program context
type. This failure is seen when an XDP program is loaded using
libxdp (which loads it as BPF_PROG_TYPE_EXT and attaches it to a global XDP
type program).
Fix the issue by passing in the target program type instead of the
BPF_PROG_TYPE_EXT type to bpf_prog_get_ctx() when checking function
argument compatibility.
The first Fixes tag refers to the latest commit that touched the code in
question, while the second one points to the code that first introduced
the global function call verification.
v2:
- Use resolve_prog_type()
Fixes: 3363bd0cfb ("bpf: Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support")
Fixes: 51c39bb1d5 ("bpf: Introduce function-by-function verification")
Reported-by: Simon Sundberg <simon.sundberg@kau.se>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20220606075253.28422-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The kvmalloc_array() function is safer because it has a check for
integer overflows. These sizes come from the user and I was not
able to see any bounds checking so an integer overflow seems like a
realistic concern.
Fixes: 0dcac27254 ("bpf: Add multi kprobe link")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/Yo9VRVMeHbALyjUH@kili
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
syzbot reported an illegal copy_to_user() attempt
from bpf_prog_get_info_by_fd() [1]
There was no repro yet on this bug, but I think
that commit 0aef499f31 ("mm/usercopy: Detect vmalloc overruns")
is exposing a prior bug in bpf arm64.
bpf_prog_get_info_by_fd() looks at prog->jited_len
to determine if the JIT image can be copied out to user space.
My theory is that syzbot managed to get a prog where prog->jited_len
has been set to 43, while prog->bpf_func has ben cleared.
It is not clear why copy_to_user(uinsns, NULL, ulen) is triggering
this particular warning.
I thought find_vma_area(NULL) would not find a vm_struct.
As we do not hold vmap_area_lock spinlock, it might be possible
that the found vm_struct was garbage.
[1]
usercopy: Kernel memory exposure attempt detected from vmalloc (offset 792633534417210172, size 43)!
kernel BUG at mm/usercopy.c:101!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 25002 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-10139-g8291eaafed36 #0
Hardware name: linux,dummy-virt (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : usercopy_abort+0x90/0x94 mm/usercopy.c:101
lr : usercopy_abort+0x90/0x94 mm/usercopy.c:89
sp : ffff80000b773a20
x29: ffff80000b773a30 x28: faff80000b745000 x27: ffff80000b773b48
x26: 0000000000000000 x25: 000000000000002b x24: 0000000000000000
x23: 00000000000000e0 x22: ffff80000b75db67 x21: 0000000000000001
x20: 000000000000002b x19: ffff80000b75db3c x18: 00000000fffffffd
x17: 2820636f6c6c616d x16: 76206d6f72662064 x15: 6574636574656420
x14: 74706d6574746120 x13: 2129333420657a69 x12: 73202c3237313031
x11: 3237313434333533 x10: 3336323937207465 x9 : 657275736f707865
x8 : ffff80000a30c550 x7 : ffff80000b773830 x6 : ffff80000b773830
x5 : 0000000000000000 x4 : ffff00007fbbaa10 x3 : 0000000000000000
x2 : 0000000000000000 x1 : f7ff000028fc0000 x0 : 0000000000000064
Call trace:
usercopy_abort+0x90/0x94 mm/usercopy.c:89
check_heap_object mm/usercopy.c:186 [inline]
__check_object_size mm/usercopy.c:252 [inline]
__check_object_size+0x198/0x36c mm/usercopy.c:214
check_object_size include/linux/thread_info.h:199 [inline]
check_copy_size include/linux/thread_info.h:235 [inline]
copy_to_user include/linux/uaccess.h:159 [inline]
bpf_prog_get_info_by_fd.isra.0+0xf14/0xfdc kernel/bpf/syscall.c:3993
bpf_obj_get_info_by_fd+0x12c/0x510 kernel/bpf/syscall.c:4253
__sys_bpf+0x900/0x2150 kernel/bpf/syscall.c:4956
__do_sys_bpf kernel/bpf/syscall.c:5021 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5019 [inline]
__arm64_sys_bpf+0x28/0x40 kernel/bpf/syscall.c:5019
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x48/0x114 arch/arm64/kernel/syscall.c:52
el0_svc_common.constprop.0+0x44/0xec arch/arm64/kernel/syscall.c:142
do_el0_svc+0xa0/0xc0 arch/arm64/kernel/syscall.c:206
el0_svc+0x44/0xb0 arch/arm64/kernel/entry-common.c:624
el0t_64_sync_handler+0x1ac/0x1b0 arch/arm64/kernel/entry-common.c:642
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:581
Code: aa0003e3 d00038c0 91248000 97fff65f (d4210000)
Fixes: db496944fd ("bpf: arm64: add JIT support for multi-function programs")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220531215113.1100754-1-eric.dumazet@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The trace event "workqueue_queue_work" use unsigned int type for
req_cpu, cpu. This casue confusing cpu number like below log.
$ cat /sys/kernel/debug/tracing/trace
cat-317 [001] ...: workqueue_queue_work: ... req_cpu=8192 cpu=4294967295
So, change unsigned type to signed type in the trace event. After
applying this patch, cpu number will be printed as -1 instead of
4294967295 as folllows.
$ cat /sys/kernel/debug/tracing/trace
cat-1338 [002] ...: workqueue_queue_work: ... req_cpu=8192 cpu=-1
Cc: Baik Song An <bsahn@etri.re.kr>
Cc: Hong Yeon Kim <kimhy@etri.re.kr>
Cc: Taeung Song <taeung@reallinux.co.kr>
Cc: linuxgeek@linuxgeek.io
Signed-off-by: Wonhyuk Yang <vvghjk1234@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since flush operation synchronously waits for completion, flushing
system-wide WQs (e.g. system_wq) might introduce possibility of deadlock
due to unexpected locking dependency. Tejun Heo commented at [1] that it
makes no sense at all to call flush_workqueue() on the shared WQs as the
caller has no idea what it's gonna end up waiting for.
Although there is flush_scheduled_work() which flushes system_wq WQ with
"Think twice before calling this function! It's very easy to get into
trouble if you don't take great care." warning message, syzbot found a
circular locking dependency caused by flushing system_wq WQ [2].
Therefore, let's change the direction to that developers had better use
their local WQs if flush_scheduled_work()/flush_workqueue(system_*_wq) is
inevitable.
Steps for converting system-wide WQs into local WQs are explained at [3],
and a conversion to stop flushing system-wide WQs is in progress. Now we
want some mechanism for preventing developers who are not aware of this
conversion from again start flushing system-wide WQs.
Since I found that WARN_ON() is complete but awkward approach for teaching
developers about this problem, let's use __compiletime_warning() for
incomplete but handy approach. For completeness, we will also insert
WARN_ON() into __flush_workqueue() after all in-tree users stopped calling
flush_scheduled_work().
Link: https://lore.kernel.org/all/YgnQGZWT%2Fn3VAITX@slm.duckdns.org/ [1]
Link: https://syzkaller.appspot.com/bug?extid=bde0f89deacca7c765b8 [2]
Link: https://lkml.kernel.org/r/49925af7-78a8-a3dd-bce6-cfc02e1a9236@I-love.SAKURA.ne.jp [3]
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Tejun Heo <tj@kernel.org>
In 22f26f2177 awk was added to deduplicate *.mod files. The awk
invocation passes -v RS='( |\n)' to match a space or newline character
as the record separator. Unfortunately, POSIX states[1]
> If RS contains more than one character, the results are unspecified.
Some implementations (such as the One True Awk[2] used by the BSDs) do
not treat RS as a regular expression. When awk does not support regex
RS, build failures such as the following are produced (first error using
allmodconfig):
CC [M] arch/x86/events/intel/uncore.o
CC [M] arch/x86/events/intel/uncore_nhmex.o
CC [M] arch/x86/events/intel/uncore_snb.o
CC [M] arch/x86/events/intel/uncore_snbep.o
CC [M] arch/x86/events/intel/uncore_discovery.o
LD [M] arch/x86/events/intel/intel-uncore.o
ld: cannot find uncore_nhmex.o: No such file or directory
ld: cannot find uncore_snb.o: No such file or directory
ld: cannot find uncore_snbep.o: No such file or directory
ld: cannot find uncore_discovery.o: No such file or directory
make[3]: *** [scripts/Makefile.build:422: arch/x86/events/intel/intel-uncore.o] Error 1
make[2]: *** [scripts/Makefile.build:487: arch/x86/events/intel] Error 2
make[1]: *** [scripts/Makefile.build:487: arch/x86/events] Error 2
make: *** [Makefile:1839: arch/x86] Error 2
To avoid this, use printf(1) to produce a newline between each object
path, instead of the space produced by echo(1), so that the default RS
can be used by awk.
[1]: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/awk.html
[2]: https://github.com/onetrueawk/awk
Fixes: 22f26f2177 ("kbuild: get rid of duplication in *.mod files")
Signed-off-by: Kevin Locke <kevin@kevinlocke.name>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Another round from new cases in 5.19-rc of removing redundant
minItems/maxItems when 'items' list is specified. This time it is in
if/then schemas as the meta-schema was failing to check this case.
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
same size as the list is redundant and can be dropped. Note that is DT
schema specific behavior and not standard json-schema behavior. The tooling
will fixup the final schema adding any unspecified minItems/maxItems.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220606225137.1536010-1-robh@kernel.org
SVM uses a per-cpu variable to cache the current value of the
tsc scaling multiplier msr on each cpu.
Commit 1ab9287add
("KVM: X86: Add vendor callbacks for writing the TSC multiplier")
broke this caching logic.
Refactor the code so that all TSC scaling multiplier writes go through
a single function which checks and updates the cache.
This fixes the following scenario:
1. A CPU runs a guest with some tsc scaling ratio.
2. New guest with different tsc scaling ratio starts on this CPU
and terminates almost immediately.
This ensures that the short running guest had set the tsc scaling ratio just
once when it was set via KVM_SET_TSC_KHZ. Due to the bug,
the per-cpu cache is not updated.
3. The original guest continues to run, it doesn't restore the msr
value back to its own value, because the cache matches,
and thus continues to run with a wrong tsc scaling ratio.
Fixes: 1ab9287add ("KVM: X86: Add vendor callbacks for writing the TSC multiplier")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220606181149.103072-1-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hyperv_clock doesn't always give a stable test result, especially with
AMD CPUs. The test compares Hyper-V MSR clocksource (acquired either
with rdmsr() from within the guest or KVM_GET_MSRS from the host)
against rdtsc(). To increase the accuracy, increase the measured delay
(done with nop loop) by two orders of magnitude and take the mean rdtsc()
value before and after rdmsr()/KVM_GET_MSRS.
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220601144322.1968742-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently disabling dirty logging with the TDP MMU is extremely slow.
On a 96 vCPU / 96G VM backed with gigabyte pages, it takes ~200 seconds
to disable dirty logging with the TDP MMU, as opposed to ~4 seconds with
the shadow MMU.
When disabling dirty logging, zap non-leaf parent entries to allow
replacement with huge pages instead of recursing and zapping all of the
child, leaf entries. This reduces the number of TLB flushes required.
and reduces the disable dirty log time with the TDP MMU to ~3 seconds.
Opportunistically add a WARN() to catch GFNs that are mapped at a
higher level than their max level.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220525230904.1584480-1-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As noted (and fixed) a couple of times in the past, "=@cc<cond>" outputs
and clobbering of "cc" don't work well together. The compiler appears to
mean to reject such, but doesn't - in its upstream form - quite manage
to yet for "cc". Furthermore two similar macros don't clobber "cc", and
clobbering "cc" is pointless in asm()-s for x86 anyway - the compiler
always assumes status flags to be clobbered there.
Fixes: 989b5db215 ("x86/uaccess: Implement macros for CMPXCHG on user addresses")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Message-Id: <485c0c0b-a3a7-0b7c-5264-7d00c01de032@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When freeing obsolete previous roots, check prev_roots as intended, not
the current root.
Signed-off-by: Shaoqin Huang <shaoqin.huang@intel.com>
Fixes: 527d5cd7ee ("KVM: x86/mmu: Zap only obsolete roots if a root shadow page is zapped")
Message-Id: <20220607005905.2933378-1-shaoqin.huang@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A livepatch transition may stall indefinitely when a kvm vCPU is heavily
loaded. To the host, the vCPU task is a user thread which is spending a
very long time in the ioctl(KVM_RUN) syscall. During livepatch
transition, set_notify_signal() will be called on such tasks to
interrupt the syscall so that the task can be transitioned. This
interrupts guest execution, but when xfer_to_guest_mode_work() sees that
TIF_NOTIFY_SIGNAL is set but not TIF_SIGPENDING it concludes that an
exit to user mode is unnecessary, and guest execution is resumed without
transitioning the task for the livepatch.
This handling of TIF_NOTIFY_SIGNAL is incorrect, as set_notify_signal()
is expected to break tasks out of interruptible kernel loops and cause
them to return to userspace. Change xfer_to_guest_mode_work() to handle
TIF_NOTIFY_SIGNAL the same as TIF_SIGPENDING, signaling to the vCPU run
loop that an exit to userpsace is needed. Any pending task_work will be
run when get_signal() is called from exit_to_user_mode_loop(), so there
is no longer any need to run task work from xfer_to_guest_mode_work().
Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Seth Forshee <sforshee@digitalocean.com>
Message-Id: <20220504180840.2907296-1-sforshee@digitalocean.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A KVM device cleanup happens in either of two callbacks:
1) destroy() which is called when the VM is being destroyed;
2) release() which is called when a device fd is closed.
Most KVM devices use 1) but Book3s's interrupt controller KVM devices
(XICS, XIVE, XIVE-native) use 2) as they need to close and reopen during
the machine execution. The error handling in kvm_ioctl_create_device()
assumes destroy() is always defined which leads to NULL dereference as
discovered by Syzkaller.
This adds a checks for destroy!=NULL and adds a missing release().
This is not changing kvm_destroy_devices() as devices with defined
release() should have been removed from the KVM devices list by then.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A few more fixes for v5.19 which came in during the second half of the
merge window, again nothing that's really remarkable outside of the
individual drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmKfPyMACgkQJNaLcl1U
h9DWlQf+P5+L2OUpuLLNahRKfDlT/RScEo5+wjJ8HYEIo/3+/KI8YubrlPOHByeI
diVIfQhYw/bLW0xZEHxRhDPDzT/00ULjUlbYJ4YgyPy5dREOfO8IDDc1BwImTJqp
67UfEP6eWO8f+IpUJKV7eSng1FvV1vQsMswP1QG7K8wuZRMWzNkrpZIrQ/6vEuUd
BFiPMEiGXM/YZIBc055kqrPxD5ZyFlocg2EcHaS09jir006YlVk13DflUDVoaxwg
QGQUVhC9GrR72wB+8oRtpuzOiujvaoHlzAtA8iFp8yKY1Zsl0O2vrgLQwX1qhAcZ
oLApw1fdqKayMWhpwf2L8Hr6SGgrsA==
=zPdk
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.19-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.19
A few more fixes for v5.19 which came in during the second half of the
merge window, again nothing that's really remarkable outside of the
individual drivers.
bpf_helpers.h has been moved to tools/lib/bpf since 5.10, so add more
including path.
Fixes: edae34a3ed ("selftests net: add UDP GRO fraglist + bpf self-tests")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Lina Wang <lina.wang@mediatek.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220606064517.8175-1-lina.wang@mediatek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
unix_dgram_poll() calls unix_dgram_peer_wake_me() without `other`'s
lock held and check if its receive queue is full. Here we need to
use unix_recvq_full_lockless() instead of unix_recvq_full(), otherwise
KCSAN will report a data-race.
Fixes: 7d267278a9 ("unix: avoid use-after-free in ep_remove_wait_queue")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20220605232325.11804-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the managed API is used, there is no need to explicitly call
pci_free_irq_vectors().
This looks to be a left-over from the commit in the Fixes tag. Only the
.remove() function had been updated.
So remove this unused function call and update goto label accordingly.
Fixes: 8accc46775 ("stmmac: intel: use managed PCI function on probe and resume")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Link: https://lore.kernel.org/r/1ac9b6787b0db83b0095711882c55c77c8ea8da0.1654462241.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The code comment says that the polynomial is x^16 + x^12 + x^15 + 1, but
the correct polynomial is x^16 + x^12 + x^5 + 1. Quoting from page 2 in
the ITU-T V.41 specification [1]:
2 Encoding and checking process
The service bits and information bits, taken in conjunction,
correspond to the coefficients of a message polynomial having terms
from x^(n-1) (n = total number of bits in a block or sequence) down to
x^16. This polynomial is divided, modulo 2, by the generating
polynomial x^16 + x^12 + x^5 + 1.
The hex (truncated) polynomial 0x1021 and CRC code implementation are
correct, however.
[1] https://www.itu.int/rec/T-REC-V.41-198811-I/en
Signed-off-by: Roger Knecht <roger@norberthealth.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it has been broken for a decade.
Recently, I fixed modpost so it started to warn it again, then this
showed up in linux-next builds.
There are two ways to fix it:
- Remove __init
- Remove EXPORT_SYMBOL
I chose the latter for this case because none of the in-tree call-sites
(arch/arm/xen/enlighten.c, arch/x86/xen/grant-table.c) is compiled as
modular.
Fixes: 243848fc01 ("xen/grant-table: Move xlated_setup_gnttab_pages to common place")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20220606045920.4161881-1-masahiroy@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Add HD Audio PCI ID for Intel Meteorlake platform.
[ corrected the hex number to lower letters by tiwai ]
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220606204232.144296-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- fix a regressin in setting swiotlb ->force_bounce (me)
- make dma-debug less chatty (Rob Clark)
-----BEGIN PGP SIGNATURE-----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=JdkI
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.19-2022-06-06' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- fix a regressin in setting swiotlb ->force_bounce (me)
- make dma-debug less chatty (Rob Clark)
* tag 'dma-mapping-5.19-2022-06-06' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix setting ->force_bounce
dma-debug: make things less spammy under memory pressure
During reconnects, we check the return value from
cifs_negotiate_protocol, and have handlers for both success
and failures. But if that passes, and cifs_setup_session
returns any errors other than -EACCES, we do not handle
that. This fix adds a handler for that, so that we don't
go ahead and try a tree_connect on a failed session.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 55954f3bfd ("net: ethernet: bgmac: move BCMA MDIO Phy code into a separate file")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220603133238.44114-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Taehee Yoo says:
====================
amt: fix several bugs in amt_rcv()
This series fixes bugs in amt_rcv().
First patch fixes pskb_may_pull() issue.
Some functions missed to call pskb_may_pull() and uses wrong
parameter of pskb_may_pull().
Second patch fixes possible null-ptr-deref in amt_rcv().
If there is no amt private data in sock, skb will be freed.
And it increases stats.
But in order to increase stats, amt private data is needed.
So, uninitialised pointer will be used at that point.
Third patch fixes wrong definition of type_str[] in amt.c
====================
Link: https://lore.kernel.org/r/20220602140108.18329-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
amt message type definition starts from 1, not 0.
But type_str[] starts from 0.
So, it prints wrong type information.
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When amt interface receives amt message, it tries to obtain amt private
data from sock.
If there is no amt private data, it frees an skb immediately.
After kfree_skb(), it increases the rx_dropped stats.
But in order to use rx_dropped, amt private data is needed.
So, it makes amt_rcv() to do not increase rx_dropped stats when it can
not obtain amt private data.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 1a1a0e80e0 ("amt: fix possible memory leak in amt_rcv()")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It adds missing pskb_may_pull() in amt_update_handler() and
amt_multicast_data_handler().
And it fixes wrong parameter of pskb_may_pull() in
amt_advertisement_handler() and amt_membership_query_handler().
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: cbc21dc1cf ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's possible to change which CRTC is in use for a given
connector/encoder/bridge while we're in self-refresh without fully
disabling the connector/encoder/bridge along the way. This can confuse
the bridge encoder/bridge, because
(a) it needs to track the SR state (trying to perform "active"
operations while the panel is still in SR can be Bad(TM)); and
(b) it tracks the SR state via the CRTC state (and after the switch, the
previous SR state is lost).
Thus, we need to either somehow carry the self-refresh state over to the
new CRTC, or else force an encoder/bridge self-refresh transition during
such a switch.
I choose the latter, so we disable the encoder (and exit PSR) before
attaching it to the new CRTC (where we can continue to assume a clean
(non-self-refresh) state).
This fixes PSR issues seen on Rockchip RK3399 systems with
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c.
Change in v2:
- Drop "->enable" condition; this could possibly be "->active" to
reflect the intended hardware state, but it also is a little
over-specific. We want to make a transition through "disabled" any
time we're exiting PSR at the same time as a CRTC switch.
(Thanks Liu Ying)
Cc: Liu Ying <victor.liu@oss.nxp.com>
Cc: <stable@vger.kernel.org>
Fixes: 1452c25b0e ("drm: Add helpers to kick off self refresh mode in drivers")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228122522.v2.2.Ic15a2ef69c540aee8732703103e2cff51fb9c399@changeid
Most eDP panel functions only work correctly when the panel is not in
self-refresh. In particular, analogix_dp_bridge_disable() tends to hit
AUX channel errors if the panel is in self-refresh.
Given the above, it appears that so far, this driver assumes that we are
never in self-refresh when it comes time to fully disable the bridge.
Prior to commit 846c7dfc11 ("drm/atomic: Try to preserve the crtc
enabled state in drm_atomic_remove_fb, v2."), this tended to be true,
because we would automatically disable the pipe when framebuffers were
removed, and so we'd typically disable the bridge shortly after the last
display activity.
However, that is not guaranteed: an idle (self-refresh) display pipe may
be disabled, e.g., when switching CRTCs. We need to exit PSR first.
Stable notes: this is definitely a bugfix, and the bug has likely
existed in some form for quite a while. It may predate the "PSR helpers"
refactor, but the code looked very different before that, and it's
probably not worth rewriting the fix.
Cc: <stable@vger.kernel.org>
Fixes: 6c836d965b ("drm/rockchip: Use the helpers for PSR")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228122522.v2.1.I161904be17ba14526f78536ccd78b85818449b51@changeid
If user requests for NFT_CHAIN_HW_OFFLOAD, then check if either device
provides the .ndo_setup_tc interface or there is an indirect flow block
that has been registered. Otherwise, bail out early from the preparation
phase. Moreover, validate that family == NFPROTO_NETDEV and hook is
NF_NETDEV_INGRESS.
Fixes: c9626a2cbd ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The three commits:
36fd2a65bc ("dt-bindings: display: convert Arm HDLCD to DT schema")
0f6983509e ("dt-bindings: display: convert Arm Komeda to DT schema")
2c8b082a3a ("dt-bindings: display: convert Arm Mali-DP to DT schema")
convert the arm display dt-bindings, arm,*.txt to arm,*.yaml, but miss to
adjust its reference in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about
broken references.
Repair these file references in ARM HDLCD DRM DRIVER, ARM KOMEDA DRM-KMS
DRIVER and ARM MALI-DP DRM DRIVER.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220601041746.22986-1-lukas.bulwahn@gmail.com
There is a limitation in TI DP83867 PHY device where SGMII AN is only
triggered once after the device is booted up. Even after the PHY TPI is
down and up again, SGMII AN is not triggered and hence no new in-band
message from PHY to MAC side SGMII.
This could cause an issue during power up, when PHY is up prior to MAC.
At this condition, once MAC side SGMII is up, MAC side SGMII wouldn`t
receive new in-band message from TI PHY with correct link status, speed
and duplex info.
As suggested by TI, implemented a SW solution here to retrigger SGMII
Auto-Neg whenever there is a link change.
v2: Add Fixes tag in commit message.
Fixes: 2a10154abc ("net: phy: dp83867: Add TI dp83867 phy")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Sit, Michael Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220526090347.128742-1-tee.min.tan@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Focusrite Saffire 6 has fixed audioformat quirks with multiple
endpoints assigned to a single altsetting. Unfortunately the generic
parser couldn't detect the sync endpoint correctly as the implicit
sync due to the missing EP attribute bits. In the former kernels, it
used to work somehow casually, but it's been broken for a while after
the large code change in 5.11.
This patch cures the regression by the following:
- Allow the static quirk table to provide the sync EP information;
we just need to fill the fields and let the generic parser skipping
parsing if sync_ep is already set.
- Add the sync endpoint information to the entry for Saffire 6.
Fixes: 7b0efea4ba ("ALSA: usb-audio: Add missing ep_idx in fixed EP quirks")
Reported-and-tested-by: André Kapelrud <a.kapelrud@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220606160910.6926-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When ep_idx is already non-zero, it means usually a capture stream
that is set up explicity by a fixed-format quirk, and applying the
check for generic (non-implicit-fb) sync EPs might hit incorrectly,
resulting in a bogus sync endpoint for the capture stream.
This patch adds a check for the ep_idx and skip if it's a secondary
endpoint. It's a part of the fixes for regressions on Saffire 6.
Fixes: 7b0efea4ba ("ALSA: usb-audio: Add missing ep_idx in fixed EP quirks")
Reported-and-tested-by: André Kapelrud <a.kapelrud@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220606160910.6926-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Abort path release flow rule object, however, commit path does not.
Update code to destroy these objects before releasing the transaction.
Fixes: c9626a2cbd ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
