forked from Minki/linux
91b540f988
176 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Ross Zwisler
|
fffa281b48 |
dax: fix deadlock due to misaligned PMD faults
In DAX there are two separate places where the 2MiB range of a PMD is defined. The first is in the page tables, where a PMD mapping inserted for a given address spans from (vmf->address & PMD_MASK) to ((vmf->address & PMD_MASK) + PMD_SIZE - 1). That is, from the 2MiB boundary below the address to the 2MiB boundary above the address. So, for example, a fault at address 3MiB (0x30 0000) falls within the PMD that ranges from 2MiB (0x20 0000) to 4MiB (0x40 0000). The second PMD range is in the mapping->page_tree, where a given file offset is covered by a radix tree entry that spans from one 2MiB aligned file offset to another 2MiB aligned file offset. So, for example, the file offset for 3MiB (pgoff 768) falls within the PMD range for the order 9 radix tree entry that ranges from 2MiB (pgoff 512) to 4MiB (pgoff 1024). This system works so long as the addresses and file offsets for a given mapping both have the same offsets relative to the start of each PMD. Consider the case where the starting address for a given file isn't 2MiB aligned - say our faulting address is 3 MiB (0x30 0000), but that corresponds to the beginning of our file (pgoff 0). Now all the PMDs in the mapping are misaligned so that the 2MiB range defined in the page tables never matches up with the 2MiB range defined in the radix tree. The current code notices this case for DAX faults to storage with the following test in dax_pmd_insert_mapping(): if (pfn_t_to_pfn(pfn) & PG_PMD_COLOUR) goto unlock_fallback; This test makes sure that the pfn we get from the driver is 2MiB aligned, and relies on the assumption that the 2MiB alignment of the pfn we get back from the driver matches the 2MiB alignment of the faulting address. However, faults to holes were not checked and we could hit the problem described above. This was reported in response to the NVML nvml/src/test/pmempool_sync TEST5: $ cd nvml/src/test/pmempool_sync $ make TEST5 You can grab NVML here: https://github.com/pmem/nvml/ The dmesg warning you see when you hit this error is: WARNING: CPU: 13 PID: 2900 at fs/dax.c:641 dax_insert_mapping_entry+0x2df/0x310 Where we notice in dax_insert_mapping_entry() that the radix tree entry we are about to replace doesn't match the locked entry that we had previously inserted into the tree. This happens because the initial insertion was done in grab_mapping_entry() using a pgoff calculated from the faulting address (vmf->address), and the replacement in dax_pmd_load_hole() => dax_insert_mapping_entry() is done using vmf->pgoff. In our failure case those two page offsets (one calculated from vmf->address, one using vmf->pgoff) point to different order 9 radix tree entries. This failure case can result in a deadlock because the radix tree unlock also happens on the pgoff calculated from vmf->address. This means that the locked radix tree entry that we swapped in to the tree in dax_insert_mapping_entry() using vmf->pgoff is never unlocked, so all future faults to that 2MiB range will block forever. Fix this by validating that the faulting address's PMD offset matches the PMD offset from the start of the file. This check is done at the very beginning of the fault and covers faults that would have mapped to storage as well as faults to holes. I left the COLOUR check in dax_pmd_insert_mapping() in place in case we ever hit the insanity condition where the alignment of the pfn we get from the driver doesn't match the alignment of the userspace address. Link: http://lkml.kernel.org/r/20170822222436.18926-1-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: "Slusarz, Marcin" <marcin.slusarz@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
088737f44b |
Writeback error handling fixes (pile #2)
-----BEGIN PGP SIGNATURE-----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=3Z93
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull Writeback error handling updates from Jeff Layton:
"This pile represents the bulk of the writeback error handling fixes
that I have for this cycle. Some of the earlier patches in this pile
may look trivial but they are prerequisites for later patches in the
series.
The aim of this set is to improve how we track and report writeback
errors to userland. Most applications that care about data integrity
will periodically call fsync/fdatasync/msync to ensure that their
writes have made it to the backing store.
For a very long time, we have tracked writeback errors using two flags
in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
writeback error occurs (via mapping_set_error) and are cleared as a
side-effect of filemap_check_errors (as you noted yesterday). This
model really sucks for userland.
Only the first task to call fsync (or msync or fdatasync) will see the
error. Any subsequent task calling fsync on a file will get back 0
(unless another writeback error occurs in the interim). If I have
several tasks writing to a file and calling fsync to ensure that their
writes got stored, then I need to have them coordinate with one
another. That's difficult enough, but in a world of containerized
setups that coordination may even not be possible.
But wait...it gets worse!
The calls to filemap_check_errors can be buried pretty far down in the
call stack, and there are internal callers of filemap_write_and_wait
and the like that also end up clearing those errors. Many of those
callers ignore the error return from that function or return it to
userland at nonsensical times (e.g. truncate() or stat()). If I get
back -EIO on a truncate, there is no reason to think that it was
because some previous writeback failed, and a subsequent fsync() will
(incorrectly) return 0.
This pile aims to do three things:
1) ensure that when a writeback error occurs that that error will be
reported to userland on a subsequent fsync/fdatasync/msync call,
regardless of what internal callers are doing
2) report writeback errors on all file descriptions that were open at
the time that the error occurred. This is a user-visible change,
but I think most applications are written to assume this behavior
anyway. Those that aren't are unlikely to be hurt by it.
3) document what filesystems should do when there is a writeback
error. Today, there is very little consistency between them, and a
lot of cargo-cult copying. We need to make it very clear what
filesystems should do in this situation.
To achieve this, the set adds a new data type (errseq_t) and then
builds new writeback error tracking infrastructure around that. Once
all of that is in place, we change the filesystems to use the new
infrastructure for reporting wb errors to userland.
Note that this is just the initial foray into cleaning up this mess.
There is a lot of work remaining here:
1) convert the rest of the filesystems in a similar fashion. Once the
initial set is in, then I think most other fs' will be fairly
simple to convert. Hopefully most of those can in via individual
filesystem trees.
2) convert internal waiters on writeback to use errseq_t for
detecting errors instead of relying on the AS_* flags. I have some
draft patches for this for ext4, but they are not quite ready for
prime time yet.
This was a discussion topic this year at LSF/MM too. If you're
interested in the gory details, LWN has some good articles about this:
https://lwn.net/Articles/718734/
https://lwn.net/Articles/724307/"
* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
btrfs: minimal conversion to errseq_t writeback error reporting on fsync
xfs: minimal conversion to errseq_t writeback error reporting
ext4: use errseq_t based error handling for reporting data writeback errors
fs: convert __generic_file_fsync to use errseq_t based reporting
block: convert to errseq_t based writeback error tracking
dax: set errors in mapping when writeback fails
Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
fs: new infrastructure for writeback error handling and reporting
lib: add errseq_t type and infrastructure for handling it
mm: don't TestClearPageError in __filemap_fdatawait_range
mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
jbd2: don't clear and reset errors after waiting on writeback
buffer: set errors in mapping at the time that the error occurs
fs: check for writeback errors after syncing out buffers in generic_file_fsync
buffer: use mapping_set_error instead of setting the flag
mm: fix mapping_set_error call in me_pagecache_dirty
|
||
|
Linus Torvalds
|
b6ffe9ba46 |
libnvdimm for 4.13
* Introduce the _flushcache() family of memory copy helpers and use them
for persistent memory write operations on x86. The _flushcache()
semantic indicates that the cache is either bypassed for the copy
operation (movnt) or any lines dirtied by the copy operation are
written back (clwb, clflushopt, or clflush).
* Extend dax_operations with ->copy_from_iter() and ->flush()
operations. These operations and other infrastructure updates allow
all persistent memory specific dax functionality to be pushed into
libnvdimm and the pmem driver directly. It also allows dax-specific
sysfs attributes to be linked to a host device, for example:
/sys/block/pmem0/dax/write_cache
* Add support for the new NVDIMM platform/firmware mechanisms introduced
in ACPI 6.2 and UEFI 2.7. This support includes the v1.2 namespace
label format, extensions to the address-range-scrub command set, new
error injection commands, and a new BTT (block-translation-table)
layout. These updates support inter-OS and pre-OS compatibility.
* Fix a longstanding memory corruption bug in nfit_test.
* Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
capable.
* Miscellaneous fixes and small updates across libnvdimm and the nfit
driver.
Acknowledgements that came after the branch was pushed:
commit
|
||
Roman Gushchin
|
2262185c5b |
mm: per-cgroup memory reclaim stats
Track the following reclaim counters for every memory cgroup: PGREFILL, PGSCAN, PGSTEAL, PGACTIVATE, PGDEACTIVATE, PGLAZYFREE and PGLAZYFREED. These values are exposed using the memory.stats interface of cgroup v2. The meaning of each value is the same as for global counters, available using /proc/vmstat. Also, for consistency, rename mem_cgroup_count_vm_event() to count_memcg_event_mm(). Link: http://lkml.kernel.org/r/1494530183-30808-1-git-send-email-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Jeff Layton
|
819ec6b91d |
dax: set errors in mapping when writeback fails
Jan Kara's description for this patch is much better than mine, so I'm quoting it verbatim here: DAX currently doesn't set errors in the mapping when cache flushing fails in dax_writeback_mapping_range(). Since this function can get called only from fsync(2) or sync(2), this is actually as good as it can currently get since we correctly propagate the error up from dax_writeback_mapping_range() to filemap_fdatawrite() However, in the future better writeback error handling will enable us to properly report these errors on fsync(2) even if there are multiple file descriptors open against the file or if sync(2) gets called before fsync(2). So convert DAX to using standard error reporting through the mapping. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-and-tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> |
||
Dan Williams
|
ca6a4657e5 |
x86, libnvdimm, pmem: remove global pmem api
Now that all callers of the pmem api have been converted to dax helpers that call back to the pmem driver, we can remove include/linux/pmem.h and asm/pmem.h. Cc: <x86@kernel.org> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Oliver O'Halloran <oohall@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
Ingo Molnar
|
1bc3cd4dfa |
Merge branch 'linus' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Jan Kara
|
1eb643d02b |
fs/dax.c: fix inefficiency in dax_writeback_mapping_range()
dax_writeback_mapping_range() fails to update iteration index when
searching radix tree for entries needing cache flushing. Thus each
pagevec worth of entries is searched starting from the start which is
inefficient and prone to livelocks. Update index properly.
Link: http://lkml.kernel.org/r/20170619124531.21491-1-jack@suse.cz
Fixes:
|
||
|
Ingo Molnar
|
ac6424b981 |
sched/wait: Rename wait_queue_t => wait_queue_entry_t
Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Dan Williams
|
81f558701a |
x86, dax: replace clear_pmem() with open coded memset + dax_ops->flush
The clear_pmem() helper simply combines a memset() plus a cache flush. Now that the flush routine is optionally provided by the dax device driver we can avoid unnecessary cache management on dax devices fronting volatile memory. With clear_pmem() gone we can follow on with a patch to make pmem cache management completely defined within the pmem driver. Cc: <x86@kernel.org> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Dan Williams
|
6318770a7d |
filesystem-dax: convert to dax_flush()
Filesystem-DAX flushes caches whenever it writes to the address returned through dax_direct_access() and when writing back dirty radix entries. That flushing is only required in the pmem case, so the dax_flush() helper skips cache management work when the underlying driver does not specify a flush method. We still do all the dirty tracking since the radix entry will already be there for locking purposes. However, the work to clean the entry will be a nop for some dax drivers. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Dan Williams
|
fec53774fd |
filesystem-dax: convert to dax_copy_from_iter()
Now that all possible providers of the dax_operations copy_from_iter method are implemented, switch filesytem-dax to call the driver rather than copy_to_iter_pmem. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Ross Zwisler
|
e2093926a0 |
dax: fix race between colliding PMD & PTE entries
We currently have two related PMD vs PTE races in the DAX code. These
can both be easily triggered by having two threads reading and writing
simultaneously to the same private mapping, with the key being that
private mapping reads can be handled with PMDs but private mapping
writes are always handled with PTEs so that we can COW.
Here is the first race:
CPU 0 CPU 1
(private mapping write)
__handle_mm_fault()
create_huge_pmd() - FALLBACK
handle_pte_fault()
passes check for pmd_devmap()
(private mapping read)
__handle_mm_fault()
create_huge_pmd()
dax_iomap_pmd_fault() inserts PMD
dax_iomap_pte_fault() does a PTE fault, but we already have a DAX PMD
installed in our page tables at this spot.
Here's the second race:
CPU 0 CPU 1
(private mapping read)
__handle_mm_fault()
passes check for pmd_none()
create_huge_pmd()
dax_iomap_pmd_fault() inserts PMD
(private mapping write)
__handle_mm_fault()
create_huge_pmd() - FALLBACK
(private mapping read)
__handle_mm_fault()
passes check for pmd_none()
create_huge_pmd()
handle_pte_fault()
dax_iomap_pte_fault() inserts PTE
dax_iomap_pmd_fault() inserts PMD,
but we already have a PTE at
this spot.
The core of the issue is that while there is isolation between faults to
the same range in the DAX fault handlers via our DAX entry locking,
there is no isolation between faults in the code in mm/memory.c. This
means for instance that this code in __handle_mm_fault() can run:
if (pmd_none(*vmf.pmd) && transparent_hugepage_enabled(vma)) {
ret = create_huge_pmd(&vmf);
But by the time we actually get to run the fault handler called by
create_huge_pmd(), the PMD is no longer pmd_none() because a racing PTE
fault has installed a normal PMD here as a parent. This is the cause of
the 2nd race. The first race is similar - there is the following check
in handle_pte_fault():
} else {
/* See comment in pte_alloc_one_map() */
if (pmd_devmap(*vmf->pmd) || pmd_trans_unstable(vmf->pmd))
return 0;
So if a pmd_devmap() PMD (a DAX PMD) has been installed at vmf->pmd, we
will bail and retry the fault. This is correct, but there is nothing
preventing the PMD from being installed after this check but before we
actually get to the DAX PTE fault handlers.
In my testing these races result in the following types of errors:
BUG: Bad rss-counter state mm:ffff8800a817d280 idx:1 val:1
BUG: non-zero nr_ptes on freeing mm: 15
Fix this issue by having the DAX fault handlers verify that it is safe
to continue their fault after they have taken an entry lock to block
other racing faults.
[ross.zwisler@linux.intel.com: improve fix for colliding PMD & PTE entries]
Link: http://lkml.kernel.org/r/20170526195932.32178-1-ross.zwisler@linux.intel.com
Link: http://lkml.kernel.org/r/20170522215749.23516-2-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Pawel Lebioda <pawel.lebioda@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Pawel Lebioda <pawel.lebioda@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Xiong Zhou <xzhou@redhat.com>
Cc: Eryu Guan <eguan@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
1251704a63 |
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, docs: update memory.stat description with workingset* entries mm: vmscan: scan until it finds eligible pages mm, thp: copying user pages must schedule on collapse dax: fix PMD data corruption when fault races with write dax: fix data corruption when fault races with write ext4: return to starting transaction in ext4_dax_huge_fault() mm: fix data corruption due to stale mmap reads dax: prevent invalidation of mapped DAX entries Tigran has moved mm, vmalloc: fix vmalloc users tracking properly mm/khugepaged: add missed tracepoint for collapse_huge_page_swapin gcov: support GCC 7.1 mm, vmstat: Remove spurious WARN() during zoneinfo print time: delete current_fs_time() hwpoison, memcg: forcibly uncharge LRU pages |
||
|
Ross Zwisler
|
876f29460c |
dax: fix PMD data corruption when fault races with write
This is based on a patch from Jan Kara that fixed the equivalent race in
the DAX PTE fault path.
Currently DAX PMD read fault can race with write(2) in the following
way:
CPU1 - write(2) CPU2 - read fault
dax_iomap_pmd_fault()
->iomap_begin() - sees hole
dax_iomap_rw()
iomap_apply()
->iomap_begin - allocates blocks
dax_iomap_actor()
invalidate_inode_pages2_range()
- there's nothing to invalidate
grab_mapping_entry()
- we add huge zero page to the radix tree
and map it to page tables
The result is that hole page is mapped into page tables (and thus zeros
are seen in mmap) while file has data written in that place.
Fix the problem by locking exception entry before mapping blocks for the
fault. That way we are sure invalidate_inode_pages2_range() call for
racing write will either block on entry lock waiting for the fault to
finish (and unmap stale page tables after that) or read fault will see
already allocated blocks by write(2).
Fixes:
|
||
|
Jan Kara
|
13e451fdc1 |
dax: fix data corruption when fault races with write
Currently DAX read fault can race with write(2) in the following way:
CPU1 - write(2) CPU2 - read fault
dax_iomap_pte_fault()
->iomap_begin() - sees hole
dax_iomap_rw()
iomap_apply()
->iomap_begin - allocates blocks
dax_iomap_actor()
invalidate_inode_pages2_range()
- there's nothing to invalidate
grab_mapping_entry()
- we add zero page in the radix tree
and map it to page tables
The result is that hole page is mapped into page tables (and thus zeros
are seen in mmap) while file has data written in that place.
Fix the problem by locking exception entry before mapping blocks for the
fault. That way we are sure invalidate_inode_pages2_range() call for
racing write will either block on entry lock waiting for the fault to
finish (and unmap stale page tables after that) or read fault will see
already allocated blocks by write(2).
Fixes:
|
||
|
Jan Kara
|
cd656375f9 |
mm: fix data corruption due to stale mmap reads
Currently, we didn't invalidate page tables during invalidate_inode_pages2()
for DAX. That could result in e.g. 2MiB zero page being mapped into
page tables while there were already underlying blocks allocated and
thus data seen through mmap were different from data seen by read(2).
The following sequence reproduces the problem:
- open an mmap over a 2MiB hole
- read from a 2MiB hole, faulting in a 2MiB zero page
- write to the hole with write(3p). The write succeeds but we
incorrectly leave the 2MiB zero page mapping intact.
- via the mmap, read the data that was just written. Since the zero
page mapping is still intact we read back zeroes instead of the new
data.
Fix the problem by unconditionally calling invalidate_inode_pages2_range()
in dax_iomap_actor() for new block allocations and by properly
invalidating page tables in invalidate_inode_pages2_range() for DAX
mappings.
Fixes:
|
||
|
Ross Zwisler
|
4636e70bb0 |
dax: prevent invalidation of mapped DAX entries
Patch series "mm,dax: Fix data corruption due to mmap inconsistency",
v4.
This series fixes data corruption that can happen for DAX mounts when
page faults race with write(2) and as a result page tables get out of
sync with block mappings in the filesystem and thus data seen through
mmap is different from data seen through read(2).
The series passes testing with t_mmap_stale test program from Ross and
also other mmap related tests on DAX filesystem.
This patch (of 4):
dax_invalidate_mapping_entry() currently removes DAX exceptional entries
only if they are clean and unlocked. This is done via:
invalidate_mapping_pages()
invalidate_exceptional_entry()
dax_invalidate_mapping_entry()
However, for page cache pages removed in invalidate_mapping_pages()
there is an additional criteria which is that the page must not be
mapped. This is noted in the comments above invalidate_mapping_pages()
and is checked in invalidate_inode_page().
For DAX entries this means that we can can end up in a situation where a
DAX exceptional entry, either a huge zero page or a regular DAX entry,
could end up mapped but without an associated radix tree entry. This is
inconsistent with the rest of the DAX code and with what happens in the
page cache case.
We aren't able to unmap the DAX exceptional entry because according to
its comments invalidate_mapping_pages() isn't allowed to block, and
unmap_mapping_range() takes a write lock on the mapping->i_mmap_rwsem.
Since we essentially never have unmapped DAX entries to evict from the
radix tree, just remove dax_invalidate_mapping_entry().
Fixes:
|
||
|
Linus Torvalds
|
0fcc3ab23d |
Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"Incremental fixes and a small feature addition on top of the main
libnvdimm 4.12 pull request:
- Geert noticed that tinyconfig was bloated by BLOCK selecting DAX.
The size regression is fixed by moving all dax helpers into the
dax-core and only specifying "select DAX" for FS_DAX and
dax-capable drivers. He also asked for clarification of the
NR_DEV_DAX config option which, on closer look, does not need to be
a config option at all. Mike also throws in a DEV_DAX_PMEM fixup
for good measure.
- Ben's attention to detail on -stable patch submissions caught a
case where the recent fixes to arch_copy_from_iter_pmem() missed a
condition where we strand dirty data in the cache. This is tagged
for -stable and will also be included in the rework of the pmem api
to a proposed {memcpy,copy_user}_flushcache() interface for 4.13.
- Vishal adds a feature that missed the initial pull due to pending
review feedback. It allows the kernel to clear media errors when
initializing a BTT (atomic sector update driver) instance on a pmem
namespace.
- Ross noticed that the dax_device + dax_operations conversion broke
__dax_zero_page_range(). The nvdimm unit tests fail to check this
path, but xfstests immediately trips over it. No excuse for missing
this before submitting the 4.12 pull request.
These all pass the nvdimm unit tests and an xfstests spot check. The
set has received a build success notification from the kbuild robot"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
filesystem-dax: fix broken __dax_zero_page_range() conversion
libnvdimm, btt: ensure that initializing metadata clears poison
libnvdimm: add an atomic vs process context flag to rw_bytes
x86, pmem: Fix cache flushing for iovec write < 8 bytes
device-dax: kill NR_DEV_DAX
block, dax: move "select DAX" from BLOCK to FS_DAX
device-dax: Tell kbuild DEV_DAX_PMEM depends on DEV_DAX
|
||
|
Dan Williams
|
e84b83b9ee |
filesystem-dax: fix broken __dax_zero_page_range() conversion
The conversion of __dax_zero_page_range() to 'struct dax_operations'
caused it to frequently fail. The mistake was treating the @size
parameter as a dax mapping length rather than just a length of the
clear_pmem() operation. The dax mapping length is assumed to be hard
coded as PAGE_SIZE.
Without this fix any page unaligned zeroing request will trigger a
-EINVAL return from bdev_dax_pgoff().
Cc: Jan Kara <jack@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Fixes:
|
||
|
Ross Zwisler
|
b444073458 |
dax: add tracepoint to dax_insert_mapping()
Add a tracepoint to dax_insert_mapping(), following the same logging conventions as the rest of DAX. This tracepoint, along with the one in dax_load_hole(), lets us know how a DAX PTE fault was serviced. Here is an example DAX fault that inserts a PTE mapping: small-1126 [007] .... 145.451604: dax_pte_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220 small-1126 [007] .... 145.452317: dax_insert_mapping: dev 259:0 ino 0x1003 shared write address 0x10420000 radix_entry 0x100006 small-1126 [007] .... 145.452399: dax_pte_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220 MAJOR|NOPAGE Link: http://lkml.kernel.org/r/20170221195116.13278-7-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ross Zwisler
|
f9bc3a0753 |
dax: add tracepoint to dax_writeback_one()
Add a tracepoint to dax_writeback_one(), following the same logging conventions as the rest of DAX. Here is an example range writeback which ends up flushing one PMD and one PTE: test-1265 [003] .... 496.615250: dax_writeback_range: dev 259:0 ino 0x1003 pgoff 0x0-0x7ffffffffffff test-1265 [003] .... 496.616263: dax_writeback_one: dev 259:0 ino 0x1003 pgoff 0x0 pglen 0x200 test-1265 [003] .... 496.616270: dax_writeback_one: dev 259:0 ino 0x1003 pgoff 0x305 pglen 0x1 test-1265 [003] .... 496.616272: dax_writeback_range_done: dev 259:0 ino 0x1003 pgoff 0x0-0x7ffffffffffff [akpm@linux-foundation.org: struct blk_dax_ctl has disappeared] Link: http://lkml.kernel.org/r/20170221195116.13278-6-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ross Zwisler
|
d14a3f48a1 |
dax: add tracepoints to dax_writeback_mapping_range()
Add tracepoints to dax_writeback_mapping_range(), following the same logging conventions as the rest of DAX. Here is an example writeback call: msync-1085 [006] .... 200.902565: dax_writeback_range: dev 259:0 ino 0x1003 pgoff 0x200-0x2ff msync-1085 [006] .... 200.902579: dax_writeback_range_done: dev 259:0 ino 0x1003 pgoff 0x200-0x2ff [ross.zwisler@linux.intel.com: fix regression in dax_writeback_mapping_range()] Link: http://lkml.kernel.org/r/20170314215358.31451-1-ross.zwisler@linux.intel.com Link: http://lkml.kernel.org/r/20170221195116.13278-5-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ross Zwisler
|
678c9fd043 |
dax: add tracepoints to dax_load_hole()
Add tracepoints to dax_load_hole(), following the same logging conventions
as the rest of DAX.
Here is the logging generated by a PTE read from a hole:
read-1075 [002] ....
62.362108: dax_pte_fault: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10480000 pgoff 0x280
read-1075 [002] ....
62.362140: dax_load_hole: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10480000 pgoff 0x280 NOPAGE
read-1075 [002] ....
62.362141: dax_pte_fault_done: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10480000 pgoff 0x280 NOPAGE
Link: http://lkml.kernel.org/r/20170221195116.13278-4-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Ross Zwisler
|
c3ff68d7d1 |
dax: add tracepoints to dax_pfn_mkwrite()
Add tracepoints to dax_pfn_mkwrite(), following the same logging conventions as the rest of DAX. Here is an example PTE fault followed by a pfn_mkwrite: small_aligned-1094 [002] .... 374.084998: dax_pte_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10400000 pgoff 0x200 small_aligned-1094 [002] .... 374.085145: dax_pte_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10400000 pgoff 0x200 MAJOR|NOPAGE small_aligned-1094 [002] .... 374.085165: dax_pfn_mkwrite: dev 259:0 ino 0x1003 shared WRITE|MKWRITE|ALLOW_RETRY|KILLABLE|USER address 0x10400000 pgoff 0x200 NOPAGE Link: http://lkml.kernel.org/r/20170221195116.13278-3-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ross Zwisler
|
a9c42b33ed |
dax: add tracepoints to dax_iomap_pte_fault()
Patch series "second round of tracepoints for DAX".
This second round of DAX tracepoint patches adds tracing to the PTE
fault path (dax_iomap_pte_fault(), dax_pfn_mkwrite(), dax_load_hole(),
dax_insert_mapping()) and to the writeback path
(dax_writeback_mapping_range(), dax_writeback_one()).
The purpose of this tracing is to give us a high level view of what DAX
is doing, whether faults are being serviced by PMDs or PTEs, and by real
storage or by zero pages covering holes.
I do have some patches nearly ready which also add tracing to
grab_mapping_entry() and dax_insert_mapping_entry(). These are more
targeted at logging how we are interacting with the radix tree, how we
use empty entries for locking, whether we "downgrade" huge zero pages to
4k PTE sized allocations, etc. In the end it seemed to me that this
might be too detailed to have as constantly present tracepoints, but if
anyone sees value in having tracepoints like this in the DAX code
permanently (Jan?), please let me know and I'll add those last two
patches.
All these tracepoints were done to be consistent with the style of the
XFS tracepoints and with the existing DAX PMD tracepoints.
This patch (of 6):
Add tracepoints to dax_iomap_pte_fault(), following the same logging
conventions as the rest of DAX.
Here is an example fault that initially tries to be serviced by the PMD
fault handler but which falls back to PTEs because the VMA isn't large
enough to hold a PMD:
small-1086 [005] ....
71.140014: xfs_filemap_huge_fault: dev 259:0 ino 0x1003
small-1086 [005] ....
71.140027: dax_pmd_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 vm_start 0x10200000 vm_end 0x10500000 pgoff 0x220 max_pgoff 0x1400
small-1086 [005] ....
71.140028: dax_pmd_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 vm_start 0x10200000 vm_end 0x10500000 pgoff 0x220 max_pgoff 0x1400 FALLBACK
small-1086 [005] ....
71.140035: dax_pte_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220
small-1086 [005] ....
71.140396: dax_pte_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10420000 pgoff 0x220 MAJOR|NOPAGE
Link: http://lkml.kernel.org/r/20170221195116.13278-2-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Linus Torvalds
|
53ef7d0e20 |
libnvdimm for 4.12
* Region media error reporting: A libnvdimm region device is the parent to one or more namespaces. To date, media errors have been reported via the "badblocks" attribute attached to pmem block devices for namespaces in "raw" or "memory" mode. Given that namespaces can be in "device-dax" or "btt-sector" mode this new interface reports media errors generically, i.e. independent of namespace modes or state. This subsequently allows userspace tooling to craft "ACPI 6.1 Section 9.20.7.6 Function Index 4 - Clear Uncorrectable Error" requests and submit them via the ioctl path for NVDIMM root bus devices. * Introduce 'struct dax_device' and 'struct dax_operations': Prompted by a request from Linus and feedback from Christoph this allows for dax capable drivers to publish their own custom dax operations. This fixes the broken assumption that all dax operations are related to a persistent memory device, and makes it easier for other architectures and platforms to add customized persistent memory support. * 'libnvdimm' core updates: A new "deep_flush" sysfs attribute is available for storage appliance applications to manually trigger memory controllers to drain write-pending buffers that would otherwise be flushed automatically by the platform ADR (asynchronous-DRAM-refresh) mechanism at a power loss event. Support for "locked" DIMMs is included to prevent namespaces from surfacing when the namespace label data area is locked. Finally, fixes for various reported deadlocks and crashes, also tagged for -stable. * ACPI / nfit driver updates: General updates of the nfit driver to add DSM command overrides, ACPI 6.1 health state flags support, DSM payload debug available by default, and various fixes. Acknowledgements that came after the branch was pushed: commmit |
||
|
Linus Torvalds
|
694752922b |
Merge branch 'for-4.12/block' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe: - Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ was initially a fork of CFQ, but subsequently changed to implement fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant to be used on desktop type single drives, providing good fairness. From Paolo. - Add Kyber IO scheduler. This is a full multiqueue aware scheduler, using a scalable token based algorithm that throttles IO based on live completion IO stats, similary to blk-wbt. From Omar. - A series from Jan, moving users to separately allocated backing devices. This continues the work of separating backing device life times, solving various problems with hot removal. - A series of updates for lightnvm, mostly from Javier. Includes a 'pblk' target that exposes an open channel SSD as a physical block device. - A series of fixes and improvements for nbd from Josef. - A series from Omar, removing queue sharing between devices on mostly legacy drivers. This helps us clean up other bits, if we know that a queue only has a single device backing. This has been overdue for more than a decade. - Fixes for the blk-stats, and improvements to unify the stats and user windows. This both improves blk-wbt, and enables other users to register a need to receive IO stats for a device. From Omar. - blk-throttle improvements from Shaohua. This provides a scalable framework for implementing scalable priotization - particularly for blk-mq, but applicable to any type of block device. The interface is marked experimental for now. - Bucketized IO stats for IO polling from Stephen Bates. This improves efficiency of polled workloads in the presence of mixed block size IO. - A few fixes for opal, from Scott. - A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics. From a variety of folks, mostly Sagi and James Smart. - A series from Bart, improving our exposed info and capabilities from the blk-mq debugfs support. - A series from Christoph, cleaning up how handle WRITE_ZEROES. - A series from Christoph, cleaning up the block layer handling of how we track errors in a request. On top of being a nice cleanup, it also shrinks the size of struct request a bit. - Removal of mg_disk and hd (sorry Linus) by Christoph. The former was never used by platforms, and the latter has outlived it's usefulness. - Various little bug fixes and cleanups from a wide variety of folks. * 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits) block: hide badblocks attribute by default blk-mq: unify hctx delay_work and run_work block: add kblock_mod_delayed_work_on() blk-mq: unify hctx delayed_run_work and run_work nbd: fix use after free on module unload MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler blk-mq-sched: alloate reserved tags out of normal pool mtip32xx: use runtime tag to initialize command header scsi: Implement blk_mq_ops.show_rq() blk-mq: Add blk_mq_ops.show_rq() blk-mq: Show operation, cmd_flags and rq_flags names blk-mq: Make blk_flags_show() callers append a newline character blk-mq: Move the "state" debugfs attribute one level down blk-mq: Unregister debugfs attributes earlier blk-mq: Only unregister hctxs for which registration succeeded blk-mq-debugfs: Rename functions for registering and unregistering the mq directory blk-mq: Let blk_mq_debugfs_register() look up the queue name blk-mq: Register <dev>/queue/mq after having registered <dev>/queue ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset ide-pm: always pass 0 error to __blk_end_request_all .. |
||
|
Dan Williams
|
cccbce6715 |
filesystem-dax: convert to dax_direct_access()
Now that a dax_device is plumbed through all dax-capable drivers we can switch from block_device_operations to dax_operations for invoking ->direct_access. This also lets us kill off some usages of struct blk_dax_ctl on the way to its eventual removal. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Dan Williams
|
a41fe02b6b |
Revert "block: use DAX for partition table reads"
commit |
||
Christoph Hellwig
|
ee472d835c |
block: add a flags argument to (__)blkdev_issue_zeroout
Turn the existing discard flag into a new BLKDEV_ZERO_UNMAP flag with similar semantics, but without referring to diѕcard. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com> |
||
|
Ross Zwisler
|
e11f8b7b6c |
dax: fix radix tree insertion race
While running generic/340 in my test setup I hit the following race. It
can happen with kernels that support FS DAX PMDs, so v4.10 thru
v4.11-rc5.
Thread 1 Thread 2
-------- --------
dax_iomap_pmd_fault()
grab_mapping_entry()
spin_lock_irq()
get_unlocked_mapping_entry()
'entry' is NULL, can't call lock_slot()
spin_unlock_irq()
radix_tree_preload()
dax_iomap_pmd_fault()
grab_mapping_entry()
spin_lock_irq()
get_unlocked_mapping_entry()
...
lock_slot()
spin_unlock_irq()
dax_pmd_insert_mapping()
<inserts a PMD mapping>
spin_lock_irq()
__radix_tree_insert() fails with -EEXIST
<fall back to 4k fault, and die horribly
when inserting a 4k entry where a PMD exists>
The issue is that we have to drop mapping->tree_lock while calling
radix_tree_preload(), but since we didn't have a radix tree entry to
lock (unlike in the pmd_downgrade case) we have no protection against
Thread 2 coming along and inserting a PMD at the same index. For 4k
entries we handled this with a special-case response to -EEXIST coming
from the __radix_tree_insert(), but this doesn't save us for PMDs
because the -EEXIST case can also mean that we collided with a 4k entry
in the radix tree at a different index, but one that is covered by our
PMD range.
So, correctly handle both the 4k and 2M collision cases by explicitly
re-checking the radix tree for an entry at our index once we reacquire
mapping->tree_lock.
This patch has made it through a clean xfstests run with the current
v4.11-rc5 based linux/master, and it also ran generic/340 500 times in a
loop. It used to fail within the first 10 iterations.
Link: http://lkml.kernel.org/r/20170406212944.2866-1-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: <stable@vger.kernel.org> [4.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Ingo Molnar
|
f361bf4a66 |
sched/headers: Prepare for the reduction of <linux/sched.h>'s signal API dependency
Instead of including the full <linux/signal.h>, we are going to include the types-only <linux/signal_types.h> header in <linux/sched.h>, to further decouple the scheduler header from the signal headers. This means that various files which relied on the full <linux/signal.h> need to be updated to gain an explicit dependency on it. Update the code that relies on sched.h's inclusion of the <linux/signal.h> header. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
Arnd Bergmann
|
01cddfe990 |
mm,fs,dax: mark dax_iomap_pmd_fault as const
The two alternative implementations of dax_iomap_fault have different
prototypes, and one of them is obviously wrong as seen from this build
warning:
fs/dax.c: In function 'dax_iomap_fault':
fs/dax.c:1462:35: error: passing argument 2 of 'dax_iomap_pmd_fault' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
This marks the argument 'const' as in all the related functions.
Fixes:
|
||
Dave Jiang
|
c791ace1e7 |
mm: replace FAULT_FLAG_SIZE with parameter to huge_fault
Since the introduction of FAULT_FLAG_SIZE to the vm_fault flag, it has been somewhat painful with getting the flags set and removed at the correct locations. More than one kernel oops was introduced due to difficulties of getting the placement correctly. Remove the flag values and introduce an input parameter to huge_fault that indicates the size of the page entry. This makes the code easier to trace and should avoid the issues we see with the fault flags where removal of the flag was necessary in the fallback paths. Link: http://lkml.kernel.org/r/148615748258.43180.1690152053774975329.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Dave Jiang
|
a2d581675d |
mm,fs,dax: change ->pmd_fault to ->huge_fault
Patch series "1G transparent hugepage support for device dax", v2. The following series implements support for 1G trasparent hugepage on x86 for device dax. The bulk of the code was written by Mathew Wilcox a while back supporting transparent 1G hugepage for fs DAX. I have forward ported the relevant bits to 4.10-rc. The current submission has only the necessary code to support device DAX. Comments from Dan Williams: So the motivation and intended user of this functionality mirrors the motivation and users of 1GB page support in hugetlbfs. Given expected capacities of persistent memory devices an in-memory database may want to reduce tlb pressure beyond what they can already achieve with 2MB mappings of a device-dax file. We have customer feedback to that effect as Willy mentioned in his previous version of these patches [1]. [1]: https://lkml.org/lkml/2016/1/31/52 Comments from Nilesh @ Oracle: There are applications which have a process model; and if you assume 10,000 processes attempting to mmap all the 6TB memory available on a server; we are looking at the following: processes : 10,000 memory : 6TB pte @ 4k page size: 8 bytes / 4K of memory * #processes = 6TB / 4k * 8 * 10000 = 1.5GB * 80000 = 120,000GB pmd @ 2M page size: 120,000 / 512 = ~240GB pud @ 1G page size: 240GB / 512 = ~480MB As you can see with 2M pages, this system will use up an exorbitant amount of DRAM to hold the page tables; but the 1G pages finally brings it down to a reasonable level. Memory sizes will keep increasing; so this number will keep increasing. An argument can be made to convert the applications from process model to thread model, but in the real world that may not be always practical. Hopefully this helps explain the use case where this is valuable. This patch (of 3): In preparation for adding the ability to handle PUD pages, convert vm_operations_struct.pmd_fault to vm_operations_struct.huge_fault. The vm_fault structure is extended to include a union of the different page table pointers that may be needed, and three flag bits are reserved to indicate which type of pointer is in the union. [ross.zwisler@linux.intel.com: remove unused function ext4_dax_huge_fault()] Link: http://lkml.kernel.org/r/1485813172-7284-1-git-send-email-ross.zwisler@linux.intel.com [dave.jiang@intel.com: clear PMD or PUD size flags when in fall through path] Link: http://lkml.kernel.org/r/148589842696.5820.16078080610311444794.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545058784.17912.6353162518188733642.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Dave Jiang
|
11bac80004 |
mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmf
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to take a vma and vmf parameter when the vma already resides in vmf. Remove the vma parameter to simplify things. [arnd@arndb.de: fix ARM build] Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
bc49a7831b |
Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton: "142 patches: - DAX updates - various misc bits - OCFS2 updates - most of MM" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (142 commits) mm/z3fold.c: limit first_num to the actual range of possible buddy indexes mm: fix <linux/pagemap.h> stray kernel-doc notation zram: remove obsolete sysfs attrs mm/memblock.c: remove unnecessary log and clean up oom-reaper: use madvise_dontneed() logic to decide if unmap the VMA mm: drop unused argument of zap_page_range() mm: drop zap_details::check_swap_entries mm: drop zap_details::ignore_dirty mm, page_alloc: warn_alloc nodemask is NULL when cpusets are disabled mm: help __GFP_NOFAIL allocations which do not trigger OOM killer mm, oom: do not enforce OOM killer for __GFP_NOFAIL automatically mm: consolidate GFP_NOFAIL checks in the allocator slowpath lib/show_mem.c: teach show_mem to work with the given nodemask arch, mm: remove arch specific show_mem mm, page_alloc: warn_alloc print nodemask mm, page_alloc: do not report all nodes in show_mem Revert "mm: bail out in shrink_inactive_list()" mm, vmscan: consider eligible zones in get_scan_count mm, vmscan: cleanup lru size claculations mm, vmscan: do not count freed pages as PGDEACTIVATE ... |
||
|
Linus Torvalds
|
a27fcb0cd1 |
Changes since last update:
- Various cleanups - Livelock fixes for eofblocks scanning - Improved input verification for on-disk metadata - Fix races in the copy on write remap mechanism - Fix buffer io error timeout controls - Streamlining of directio copy on write - Asynchronous discard support - Fix asserts when splitting delalloc reservations - Don't bloat bmbt when right shifting extents - Inode alignment fixes for 32k block sizes -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABCgAGBQJYp85wAAoJEPh/dxk0SrTr5HgP/jcx/oI+ap/NaXMi1Q8K65mh C3gf27cgUxtdGnEO5KRUE1Jyscuu4ZpzugDdLQISwR55kesT5FU0xpgbsfiICc86 dxLAhg8auwpTfHV+96Do2hfpO3IhYoBC2w5jo32+C+SaQUqTdPixncZukX89tjyP HOFLrQnpc336hCO2rv1Q9hSkD6IUCkSAtk+Dh1xMvbsmKFLGdmkTdqUQfl1U4YnV 2S98k9QSRdiVyzj3lAGOy+IU9aTcPX/PptMEYaQZEaod5WWNjy91lQZNM6zRc4QW 8P199yiH6CQa2vESO2SV72cJ40WihM1KQXqnrlJjAMGQ7mMGTGJcTwxhuZYUbDYZ cuk6bAUaijt/PzfmydJKlcH8vFerX4aU4CGkxPU0nph0iTR5kxYlIAMmFw2cdRzf Iar3SBb8Pc9jiNnEZMFsQ0Fd9hNk9rNoUSpKqm4FtSRocU6JjmpAdPqNYdTVKc2l 2EY7JMo0xCaTVC1WT6sE2NsxsFvm0R7H6HHG2vMFIMNkhI24GRijIXH6dQlaGCQJ 5oTHrSM7503qPlEQNsxF7zI02LpJT+duf+2ODw/FSjA1z/TWwOUYYUrPUOyQNdzP NrRnMa6LWsEehkuvz2FFko8PKXD55lTuUP1KdjigjqKp8Jzkc/PP+uvuwF5vUFfd pWRvE5m/NePWBZetbL3Q =Ga1F -----END PGP SIGNATURE----- Merge tag 'xfs-4.11-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull xfs updates from Darrick Wong: "Here are the XFS changes for 4.11. We aren't introducing any major features in this release cycle except for this being the first merge window I've managed on my own. :) Changes since last update: - Various cleanups - Livelock fixes for eofblocks scanning - Improved input verification for on-disk metadata - Fix races in the copy on write remap mechanism - Fix buffer io error timeout controls - Streamlining of directio copy on write - Asynchronous discard support - Fix asserts when splitting delalloc reservations - Don't bloat bmbt when right shifting extents - Inode alignment fixes for 32k block sizes" * tag 'xfs-4.11-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (39 commits) xfs: remove XFS_ALLOCTYPE_ANY_AG and XFS_ALLOCTYPE_START_AG xfs: simplify xfs_rtallocate_extent xfs: tune down agno asserts in the bmap code xfs: Use xfs_icluster_size_fsb() to calculate inode chunk alignment xfs: don't reserve blocks for right shift transactions xfs: fix len comparison in xfs_extent_busy_trim xfs: fix uninitialized variable in _reflink_convert_cow xfs: split indlen reservations fairly when under reserved xfs: handle indlen shortage on delalloc extent merge xfs: resurrect debug mode drop buffered writes mechanism xfs: clear delalloc and cache on buffered write failure xfs: don't block the log commit handler for discards xfs: improve busy extent sorting xfs: improve handling of busy extents in the low-level allocator xfs: don't fail xfs_extent_busy allocation xfs: correct null checks and error processing in xfs_initialize_perag xfs: update ctime and mtime on clone destinatation inodes xfs: allocate direct I/O COW blocks in iomap_begin xfs: go straight to real allocations for direct I/O COW writes xfs: return the converted extent in __xfs_reflink_convert_cow ... |
||
|
Dave Jiang
|
f42003917b |
mm, dax: change pmd_fault() to take only vmf parameter
pmd_fault() and related functions really only need the vmf parameter since the additional parameters are all included in the vmf struct. Remove the additional parameter and simplify pmd_fault() and friends. Link: http://lkml.kernel.org/r/1484085142-2297-8-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Dave Jiang
|
d8a849e1bc |
mm, dax: make pmd_fault() and friends be the same as fault()
Instead of passing in multiple parameters in the pmd_fault() handler, a vmf can be passed in just like a fault() handler. This will simplify code and remove the need for the actual pmd fault handlers to allocate a vmf. Related functions are also modified to do the same. [dave.jiang@intel.com: fix issue with xfs_tests stall when DAX option is off] Link: http://lkml.kernel.org/r/148469861071.195597.3619476895250028518.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/1484085142-2297-7-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ross Zwisler
|
27a7ffaccd |
dax: add tracepoints to dax_pmd_insert_mapping()
Add tracepoints to dax_pmd_insert_mapping(), following the same logging conventions as the tracepoints in dax_iomap_pmd_fault(). Here is an example PMD fault showing the new tracepoints: big-1504 [001] .... 326.960743: xfs_filemap_pmd_fault: dev 259:0 ino 0x1003 big-1504 [001] .... 326.960753: dax_pmd_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400 big-1504 [001] .... 326.960981: dax_pmd_insert_mapping: dev 259:0 ino 0x1003 shared write address 0x10505000 length 0x200000 pfn 0x100600 DEV|MAP radix_entry 0xc000e big-1504 [001] .... 326.960986: dax_pmd_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400 NOPAGE Link: http://lkml.kernel.org/r/1484085142-2297-6-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ross Zwisler
|
653b2ea339 |
dax: add tracepoints to dax_pmd_load_hole()
Add tracepoints to dax_pmd_load_hole(), following the same logging conventions as the tracepoints in dax_iomap_pmd_fault(). Here is an example PMD fault showing the new tracepoints: read_big-1478 [004] .... 238.242188: xfs_filemap_pmd_fault: dev 259:0 ino 0x1003 read_big-1478 [004] .... 238.242191: dax_pmd_fault: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10400000 vm_start 0x10200000 vm_end 0x10600000 pgoff 0x200 max_pgoff 0x1400 read_big-1478 [004] .... 238.242390: dax_pmd_load_hole: dev 259:0 ino 0x1003 shared address 0x10400000 zero_page ffffea0002c20000 radix_entry 0x1e read_big-1478 [004] .... 238.242392: dax_pmd_fault_done: dev 259:0 ino 0x1003 shared ALLOW_RETRY|KILLABLE|USER address 0x10400000 vm_start 0x10200000 vm_end 0x10600000 pgoff 0x200 max_pgoff 0x1400 NOPAGE Link: http://lkml.kernel.org/r/1484085142-2297-5-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ross Zwisler
|
282a8e0391 |
dax: add tracepoint infrastructure, PMD tracing
Tracepoints are the standard way to capture debugging and tracing information in many parts of the kernel, including the XFS and ext4 filesystems. Create a tracepoint header for FS DAX and add the first DAX tracepoints to the PMD fault handler. This allows the tracing for DAX to be done in the same way as the filesystem tracing so that developers can look at them together and get a coherent idea of what the system is doing. I added both an entry and exit tracepoint because future patches will add tracepoints to child functions of dax_iomap_pmd_fault() like dax_pmd_load_hole() and dax_pmd_insert_mapping(). We want those messages to be wrapped by the parent function tracepoints so the code flow is more easily understood. Having entry and exit tracepoints for faults also allows us to easily see what filesystems functions were called during the fault. These filesystem functions get executed via iomap_begin() and iomap_end() calls, for example, and will have their own tracepoints. For PMD faults we primarily want to understand the type of mapping, the fault flags, the faulting address and whether it fell back to 4k faults. If it fell back to 4k faults the tracepoints should let us understand why. I named the new tracepoint header file "fs_dax.h" to allow for device DAX to have its own separate tracing header in the same directory at some point. Here is an example output for these events from a successful PMD fault: big-1441 [005] .... 32.582758: xfs_filemap_pmd_fault: dev 259:0 ino 0x1003 big-1441 [005] .... 32.582776: dax_pmd_fault: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400 big-1441 [005] .... 32.583292: dax_pmd_fault_done: dev 259:0 ino 0x1003 shared WRITE|ALLOW_RETRY|KILLABLE|USER address 0x10505000 vm_start 0x10200000 vm_end 0x10700000 pgoff 0x200 max_pgoff 0x1400 NOPAGE Link: http://lkml.kernel.org/r/1484085142-2297-3-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
cab7076a18 |
For this cycle we add support for the shutdown ioctl, which is
primarily used for testing, but which can be useful on production systems when a scratch volume is being destroyed and the data on it doesn't need to be saved. This found (and we fixed) a number of bugs with ext4's recovery to corrupted file system --- the bugs increased the amount of data that could be potentially lost, and in the case of the inline data feature, could cause the kernel to BUG. Also included are a number of other bug fixes, including in ext4's fscrypt, DAX, inline data support. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlirXesACgkQ8vlZVpUN gaMOzQf8Ct6uPatV+m855oR4dAbZr2+lY4A4C+vHDzBtSMkPRyLX8cuo8XcwfTIm vPVyDnL6EPyhXPxxfItu+92wAq1m5mVpKo57d0Ft5lw0rHxNtJTgVSRzsQ7VDRjj 5qMHW2K7Bk7EjzTeW3SF8/3+hqpzkAvRtNCntcomk5h08+cWMC8JSnn1kqw+naIn EcbrC72GZb8JUELogVXC2vU58lp50SSBdr3l005jqKc5BvljMvdJ0Izn/3RVyU7u q7vtynhe2ScFcHe/UzL1QgmQOy32tJpbS0NHalW47aw3Ynmn4cSX0YhhT9FDjRNQ VOOfo1m1sAg166x0E+Nn7FeghTSSyA== =cPIf -----END PGP SIGNATURE----- Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "For this cycle we add support for the shutdown ioctl, which is primarily used for testing, but which can be useful on production systems when a scratch volume is being destroyed and the data on it doesn't need to be saved. This found (and we fixed) a number of bugs with ext4's recovery to corrupted file system --- the bugs increased the amount of data that could be potentially lost, and in the case of the inline data feature, could cause the kernel to BUG. Also included are a number of other bug fixes, including in ext4's fscrypt, DAX, inline data support" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits) ext4: rename EXT4_IOC_GOINGDOWN to EXT4_IOC_SHUTDOWN ext4: fix fencepost in s_first_meta_bg validation ext4: don't BUG when truncating encrypted inodes on the orphan list ext4: do not use stripe_width if it is not set ext4: fix stripe-unaligned allocations dax: assert that i_rwsem is held exclusive for writes ext4: fix DAX write locking ext4: add EXT4_IOC_GOINGDOWN ioctl ext4: add shutdown bit and check for it ext4: rename s_resize_flags to s_ext4_flags ext4: return EROFS if device is r/o and journal replay is needed ext4: preserve the needs_recovery flag when the journal is aborted jbd2: don't leak modified metadata buffers on an aborted journal ext4: fix inline data error paths ext4: move halfmd4 into hash.c directly ext4: fix use-after-iput when fscrypt contexts are inconsistent jbd2: fix use after free in kjournald2() ext4: fix data corruption in data=journal mode ext4: trim allocation requests to group size ext4: replace BUG_ON with WARN_ON in mb_find_extent() ... |
||
|
Christoph Hellwig
|
168316db35 |
dax: assert that i_rwsem is held exclusive for writes
Make sure all callers follow the same locking protocol, given that DAX transparantly replaced the normal buffered I/O path. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> |
||
Michal Hocko
|
d1908f5255 |
fs: break out of iomap_file_buffered_write on fatal signals
Tetsuo has noticed that an OOM stress test which performs large write
requests can cause the full memory reserves depletion. He has tracked
this down to the following path
__alloc_pages_nodemask+0x436/0x4d0
alloc_pages_current+0x97/0x1b0
__page_cache_alloc+0x15d/0x1a0 mm/filemap.c:728
pagecache_get_page+0x5a/0x2b0 mm/filemap.c:1331
grab_cache_page_write_begin+0x23/0x40 mm/filemap.c:2773
iomap_write_begin+0x50/0xd0 fs/iomap.c:118
iomap_write_actor+0xb5/0x1a0 fs/iomap.c:190
? iomap_write_end+0x80/0x80 fs/iomap.c:150
iomap_apply+0xb3/0x130 fs/iomap.c:79
iomap_file_buffered_write+0x68/0xa0 fs/iomap.c:243
? iomap_write_end+0x80/0x80
xfs_file_buffered_aio_write+0x132/0x390 [xfs]
? remove_wait_queue+0x59/0x60
xfs_file_write_iter+0x90/0x130 [xfs]
__vfs_write+0xe5/0x140
vfs_write+0xc7/0x1f0
? syscall_trace_enter+0x1d0/0x380
SyS_write+0x58/0xc0
do_syscall_64+0x6c/0x200
entry_SYSCALL64_slow_path+0x25/0x25
the oom victim has access to all memory reserves to make a forward
progress to exit easier. But iomap_file_buffered_write and other
callers of iomap_apply loop to complete the full request. We need to
check for fatal signals and back off with a short write instead.
As the iomap_apply delegates all the work down to the actor we have to
hook into those. All callers that work with the page cache are calling
iomap_write_begin so we will check for signals there. dax_iomap_actor
has to handle the situation explicitly because it copies data to the
userspace directly. Other callers like iomap_page_mkwrite work on a
single page or iomap_fiemap_actor do not allocate memory based on the
given len.
Fixes:
|
||
|
Christoph Hellwig
|
8ff6daa17b |
iomap: constify struct iomap_ops
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> |
||
|
Ross Zwisler
|
6affb9d7b1 |
dax: fix build warnings with FS_DAX and !FS_IOMAP
As reported by Arnd: https://lkml.org/lkml/2017/1/10/756 Compiling with the following configuration: # CONFIG_EXT2_FS is not set # CONFIG_EXT4_FS is not set # CONFIG_XFS_FS is not set # CONFIG_FS_IOMAP depends on the above filesystems, as is not set CONFIG_FS_DAX=y generates build warnings about unused functions in fs/dax.c: fs/dax.c:878:12: warning: `dax_insert_mapping' defined but not used [-Wunused-function] static int dax_insert_mapping(struct address_space *mapping, ^~~~~~~~~~~~~~~~~~ fs/dax.c:572:12: warning: `copy_user_dax' defined but not used [-Wunused-function] static int copy_user_dax(struct block_device *bdev, sector_t sector, size_t size, ^~~~~~~~~~~~~ fs/dax.c:542:12: warning: `dax_load_hole' defined but not used [-Wunused-function] static int dax_load_hole(struct address_space *mapping, void **entry, ^~~~~~~~~~~~~ fs/dax.c:312:14: warning: `grab_mapping_entry' defined but not used [-Wunused-function] static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index, ^~~~~~~~~~~~~~~~~~ Now that the struct buffer_head based DAX fault paths and I/O path have been removed we really depend on iomap support being present for DAX. Make this explicit by selecting FS_IOMAP if we compile in DAX support. This allows us to remove conditional selections of FS_IOMAP when FS_DAX was present for ext2 and ext4, and to remove an #ifdef in fs/dax.c. Link: http://lkml.kernel.org/r/1484087383-29478-1-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ross Zwisler
|
f729c8c9b2 |
dax: wrprotect pmd_t in dax_mapping_entry_mkclean
Currently dax_mapping_entry_mkclean() fails to clean and write protect
the pmd_t of a DAX PMD entry during an *sync operation. This can result
in data loss in the following sequence:
1) mmap write to DAX PMD, dirtying PMD radix tree entry and making the
pmd_t dirty and writeable
2) fsync, flushing out PMD data and cleaning the radix tree entry. We
currently fail to mark the pmd_t as clean and write protected.
3) more mmap writes to the PMD. These don't cause any page faults since
the pmd_t is dirty and writeable. The radix tree entry remains clean.
4) fsync, which fails to flush the dirty PMD data because the radix tree
entry was clean.
5) crash - dirty data that should have been fsync'd as part of 4) could
still have been in the processor cache, and is lost.
Fix this by marking the pmd_t clean and write protected in
dax_mapping_entry_mkclean(), which is called as part of the fsync
operation 2). This will cause the writes in step 3) above to generate
page faults where we'll re-dirty the PMD radix tree entry, resulting in
flushes in the fsync that happens in step 4).
Fixes:
|