All the wakeup sources we possibly want will go through the interrupt
controller, so the parent IRQ must not be masked during suspend, or
there won't be any way to wake up the system.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200819180602.136969-1-paul@crapouillou.net
In the current code, when the eoi callback of the exti clears the pending
bit of the current interrupt, it will first read the values of fpr and
rpr, then logically OR the corresponding bit of the interrupt number,
and finally write back to fpr and rpr.
We found through experiments that if two exti interrupts,
we call them int1/int2, arrive almost at the same time. in our scenario,
the time difference is 30 microseconds, assuming int1 is triggered first.
there will be an extreme scenario: both int's pending bit are set to 1,
the irq handle of int1 is executed first, and eoi handle is then executed,
at this moment, all pending bits are cleared, but the int 2 has not
finally been reported to the cpu yet, which eventually lost int2.
According to stm32's TRM description about rpr and fpr: Writing a 1 to this
bit will trigger a rising edge event on event x, Writing 0 has no
effect.
Therefore, when clearing the pending bit, we only need to clear the
pending bit of the irq.
Fixes: 927abfc446 ("irqchip/stm32: Add stm32mp1 support with hierarchy domain")
Signed-off-by: qiuguorui1 <qiuguorui1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org # v4.18+
Link: https://lore.kernel.org/r/20200820031629.15582-1-qiuguorui1@huawei.com
It has become obvious that switching a number of irqchip drivers
to being platform drivers without considering the platform was a
mistake. We have multiple reports of end-point drivers not
probing because the irqchip driver isn't there yet, breaking
the expectations of the users.
This patch reverts:
920ecb8c35 ("irqchip/mtk-cirq: Convert to a platform driver")
f97dbf48ca ("irqchip/mtk-sysirq: Convert to a platform driver")
5be57099d4 ("irqchip/qcom-pdc: Switch to using IRQCHIP_PLATFORM_DRIVER helper macros")
95bf9305d2 ("irqchip/qcom-pdc: Allow QCOM_PDC to be loadable as a permanent module")
and leave QCOM PDC, MTK sysrq and cirq drivers as built-in, special purpose
drivers for the time being until we have worked out a better solution.
Reported-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reported-by: Frank Wunderlich <linux@fw-web.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/93debe6a0308b66d3f307af67ba7ec2c@kernel.org
After commit 92cc68e358 ("drm/vblank: Use
spin_(un)lock_irq() in drm_crtc_vblank_on()") omapdrm locking is broken:
WARNING: inconsistent lock state
5.8.0-rc2-00483-g92cc68e35863 #13 Tainted: G W
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
ea98222c (&dev->event_lock#2){?.+.}-{2:2}, at: drm_handle_vblank+0x4c/0x520 [drm]
{HARDIRQ-ON-W} state was registered at:
trace_hardirqs_on+0x9c/0x1ec
_raw_spin_unlock_irq+0x20/0x58
omap_crtc_atomic_enable+0x54/0xa0 [omapdrm]
drm_atomic_helper_commit_modeset_enables+0x218/0x270 [drm_kms_helper]
omap_atomic_commit_tail+0x48/0xc4 [omapdrm]
commit_tail+0x9c/0x190 [drm_kms_helper]
drm_atomic_helper_commit+0x154/0x188 [drm_kms_helper]
drm_client_modeset_commit_atomic+0x228/0x268 [drm]
drm_client_modeset_commit_locked+0x60/0x1d0 [drm]
drm_client_modeset_commit+0x24/0x40 [drm]
drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa8 [drm_kms_helper]
drm_fb_helper_set_par+0x2c/0x5c [drm_kms_helper]
drm_fb_helper_hotplug_event.part.0+0xa0/0xbc [drm_kms_helper]
drm_kms_helper_hotplug_event+0x24/0x30 [drm_kms_helper]
output_poll_execute+0x1a8/0x1c0 [drm_kms_helper]
process_one_work+0x268/0x800
worker_thread+0x30/0x4e0
kthread+0x164/0x190
ret_from_fork+0x14/0x20
The reason for this is that omapdrm calls drm_crtc_vblank_on() while
holding event_lock taken with spin_lock_irq().
It is not clear why drm_crtc_vblank_on() and drm_crtc_vblank_get() are
called while holding event_lock. I don't see any problem with moving
those calls outside the lock, which is what this patch does.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819103021.440288-1-tomi.valkeinen@ti.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9C2tseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGgXoH/AuyLuMWwukVjVAx
b2N2Ri0qFVyZWLky+uPqc4NkqJCbD/Rt2Kq8odLnJOrs2bXKpP5KrMl4sVqwSRr4
CSkHkpo4oglmIxe5ptoWmWjrvHm/KNDZd2PY8cehii5eXG+aS7g3rIYjSFlXzP+1
yndJ00H7CDOxHd/DngqfD+Sr7j76EM1iZE9316JR7TEu5o38I4Ipu6+3L3uFZVlf
M90SmymY6hM7AJAyuOrd79ffXQry9KvWMUYyRkYyDK8y9taOSzfdfpppk8q5cVB1
l4pcPNBiveRM3Yet7UAMb8FSz8OG0rPkkCsq8ALNU/UO91IDY832OUyLxXUpWlf6
ZWRP2HA=
=596f
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc2' into drm-misc-fixes
Backmerge requested by Tomi for a fix to omap inconsistent
locking state issue, and because we need at least v5.9-rc2 now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Our variety of defined gpu commands have the actual
command id field and possibly length and flags applied.
We did start to apply the mask during initialization of
the cmd descriptors but forgot to also apply it on comparisons.
Fix comparisons in order to properly deny access with
associated commands.
v2: fix lri with correct mask (Chris)
References: 926abff21a ("drm/i915/cmdparser: Ignore Length operands during command matching")
Reported-by: Nicolai Stange <nstange@suse.de>
Cc: stable@vger.kernel.org # v5.4+
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200817195926.12671-1-mika.kuoppala@linux.intel.com
(cherry picked from commit 3b4efa148d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Fix undefined behaviour in the iProc I2C driver by using 'BIT' marcro.
Reported-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
[wsa: in commit msg, don't say 'checkpatch' but name the issue]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Currently, a NACK in slave mode is set/cleared when SCL is held low by
the IP core right before the bit is about to be pushed out. This is too
late for clearing and then a NACK from the previous byte is still used
for the current one. Now, let's clear the NACK right after we detected
the STOP condition following the NACK.
Fixes: de20d1857d ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
We have no users of i2c_acpi_match_device() anymore and seems
will not have them in the future, thus remove dead code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When commit c64ffff7a9 ("i2c: core: Allow empty id_table in ACPI case
as well") fixed the enumeration of I²C devices on ACPI enabled platforms
when driver has no ID table, it missed the PRP0001 support.
i2c_device_match() and i2c_acpi_match_device() differently match
driver against given device. Use acpi_driver_match_device(), that is used
in the former, in i2c_device_probe() and don't fail PRP0001 enumeration
when no ID table exist.
Fixes: c64ffff7a9 ("i2c: core: Allow empty id_table in ACPI case as well")
BugLink: https://stackoverflow.com/q/63519678/2511795
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In the interest of converging on a common instrumentation infrastructure,
modernize the pr_debug() call sites added by commit 119bf81793 ("IB/cm:
Add debug prints to ib_cm"). The new tracepoints appear in a new "ib_cma"
subsystem.
The conversion is somewhat mechanical. Someone more familiar with the
semantics of the recorded information might suggest additional data
capture.
Some benefits include:
- Tracepoints enable "always on" reporting of these errors
- The error records are structured and compact
- Tracepoints provide hooks for eBPF scripts
Sample output:
nfsd-1954 [003] 62.017901: icm_dreq_skipped: local_id=1998890974 remote_id=1129750393 state=DREQ_RCVD lap_state=LAP_UNINIT
Link: https://lore.kernel.org/r/159767239665.2968.10613294222688696646.stgit@klimt.1015granger.net
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The following build error for powerpc64 was reported by Nathan Chancellor:
"$ scripts/config --file arch/powerpc/configs/powernv_defconfig -e KERNEL_XZ
$ make -skj"$(nproc)" ARCH=powerpc CROSS_COMPILE=powerpc64le-linux- distclean powernv_defconfig zImage
...
In file included from arch/powerpc/boot/../../../lib/decompress_unxz.c:234,
from arch/powerpc/boot/decompress.c:38:
arch/powerpc/boot/../../../lib/xz/xz_dec_stream.c: In function 'dec_main':
arch/powerpc/boot/../../../lib/xz/xz_dec_stream.c:586:4: error: 'fallthrough' undeclared (first use in this function)
586 | fallthrough;
| ^~~~~~~~~~~
This will end up affecting distribution configurations such as Debian
and OpenSUSE according to my testing. I am not sure what the solution
is, the PowerPC wrapper does not set -D__KERNEL__ so I am not sure
that compiler_attributes.h can be safely included."
In order to avoid these sort of problems, it seems that the best
solution is to use /* fall through */ comments instead of the
fallthrough pseudo-keyword macro in lib/, for now.
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Fixes: df561f6688 ("treewide: Use fallthrough pseudo-keyword")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-and-tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=ONgI
-----END PGP SIGNATURE-----
Merge tag 'for-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix swapfile activation on subvolumes with deleted snapshots
- error value mixup when removing directory entries from tree log
- fix lzo compression level reset after previous level setting
- fix space cache memory leak after transaction abort
- fix const function attribute
- more error handling improvements
* tag 'for-5.9-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: detect nocow for swap after snapshot delete
btrfs: check the right error variable in btrfs_del_dir_entries_in_log
btrfs: fix space cache memory leak after transaction abort
btrfs: use the correct const function attribute for btrfs_get_num_csums
btrfs: reset compression level for lzo on remount
btrfs: handle errors from async submission
-----BEGIN PGP SIGNATURE-----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=fAwK
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.9-2020-08-23' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Sagi:
- nvme completion rework from Christoph and Chao that mostly came
from a bit of divergence of how we classify errors related to
pathing/retry etc.
- nvmet passthru fixes from Chaitanya
- minor nvmet fixes from Amit and I
- mpath round-robin path selection fix from Martin
- ignore noiob for zoned devices from Keith
- minor nvme-fc fix from Tianjia"
- BFQ cgroup leak fix (Dmitry)
- block layer MAINTAINERS addition (Geert)
- fix null_blk FUA checking (Hou)
- get_max_io_size() size fix (Keith)
- fix block page_is_mergeable() for compound pages (Matthew)
- discard granularity fixes (Ming)
- IO scheduler ordering fix (Ming)
- misc fixes
* tag 'io_uring-5.9-2020-08-23' of git://git.kernel.dk/linux-block: (31 commits)
null_blk: fix passing of REQ_FUA flag in null_handle_rq
nvmet: Disable keep-alive timer when kato is cleared to 0h
nvme: redirect commands on dying queue
nvme: just check the status code type in nvme_is_path_error
nvme: refactor command completion
nvme: rename and document nvme_end_request
nvme: skip noiob for zoned devices
nvme-pci: fix PRP pool size
nvme-pci: Use u32 for nvme_dev.q_depth and nvme_queue.q_depth
nvme: Use spin_lock_irq() when taking the ctrl->lock
nvmet: call blk_mq_free_request() directly
nvmet: fix oops in pt cmd execution
nvmet: add ns tear down label for pt-cmd handling
nvme: multipath: round-robin: eliminate "fallback" variable
nvme: multipath: round-robin: fix single non-optimized path case
nvme-fc: Fix wrong return value in __nvme_fc_init_request()
nvmet-passthru: Reject commands with non-sgl flags set
nvmet: fix a memory leak
blkcg: fix memleak for iolatency
MAINTAINERS: Add missing header files to BLOCK LAYER section
...
Hi Linus,
Please, pull the following tree-wide patch that replaces tons (2484) of
/* fall through */ comments, and its variants, with the new pseudo-keyword
macro fallthrough[1]. Also, remove unnecessary fall-through markings when
it is the case.
There are currently 1167 intances of this fallthrough pseudo-keyword
macro in mainline (5.9-rc2), that have been introduced over the last
couple of development cycles:
$ git grep -nw 'fallthrough;' | wc -l
1167
The global adoption of the fallthrough pseudo-keyword is something certain
to happen; so, better sooner than later. :) This will also save everybody's
time and thousands of lines of unnecessarily repetitive changelog text.
After applying this patch on top of 5.9-rc2, we'll have a total of 3651
instances of this macro:
$ git grep -nw 'fallthrough;' | wc -l
3651
This treewide patch doesn't address ALL fall-through markings in all
subsystems at once because I have previously sent out patches for some of
such subsystems separately, and I will follow up on them; however, this
definitely contributes most of the work needed to replace all the
fall-through markings with the fallthrough pseudo-keyword macro in the
whole codebase.
I have build-tested this patch on 10 different architectures: x86_64, i386,
arm64, powerpc, s390, sparc64, sh, m68k, powerpc64 and alpha (allyesconfig
for all of them). This is in linux-next already and kernel test robot has
also helped me to successfully build-test early versions of this
patch[2][3][4][5].
Thanks
--
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
[2] https://lore.kernel.org/lkml/5f3cc99a.HgvOW3rH0mD0RmkM%25lkp@intel.com/
[3] https://lore.kernel.org/lkml/5f3dd1d2.l1axczH+t4hMBZ63%25lkp@intel.com/
[4] https://lore.kernel.org/lkml/5f3e977a.mwYHUIObbR4SHr0B%25lkp@intel.com/
[5] https://lore.kernel.org/lkml/5f3f9e1c.qsyb%2FaySkiXNpkO4%25lkp@intel.com/
-----BEGIN PGP SIGNATURE-----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=KDvo
-----END PGP SIGNATURE-----
Merge tag 'fallthrough-pseudo-keyword-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull 'fallthrough' keyword conversion from Gustavo A. R. Silva:
"A tree-wide patch that replaces tons (2484) of /* fall through */
comments, and its variants, with the new pseudo-keyword macro
fallthrough[1]. Also, remove unnecessary fall-through markings when it
is the case.
There are currently 1167 intances of this fallthrough pseudo-keyword
macro in mainline (5.9-rc2), that have been introduced over the last
couple of development cycles:
$ git grep -nw 'fallthrough;' | wc -l
1167
The global adoption of the fallthrough pseudo-keyword is something
certain to happen; so, better sooner than later. :) This will also
save everybody's time and thousands of lines of unnecessarily
repetitive changelog text.
After applying this patch on top of 5.9-rc2, we'll have a total of
3651 instances of this macro:
$ git grep -nw 'fallthrough;' | wc -l
3651
This treewide patch doesn't address ALL fall-through markings in all
subsystems at once because I have previously sent out patches for some
of such subsystems separately, and I will follow up on them; however,
this definitely contributes most of the work needed to replace all the
fall-through markings with the fallthrough pseudo-keyword macro in the
whole codebase.
I have build-tested this patch on 10 different architectures: x86_64,
i386, arm64, powerpc, s390, sparc64, sh, m68k, powerpc64 and alpha
(allyesconfig for all of them). This is in linux-next already and
kernel test robot has also helped me to successfully build-test early
versions of this patch[2][3][4][5]"
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
[2] https://lore.kernel.org/lkml/5f3cc99a.HgvOW3rH0mD0RmkM%25lkp@intel.com/
[3] https://lore.kernel.org/lkml/5f3dd1d2.l1axczH+t4hMBZ63%25lkp@intel.com/
[4] https://lore.kernel.org/lkml/5f3e977a.mwYHUIObbR4SHr0B%25lkp@intel.com/
[5] https://lore.kernel.org/lkml/5f3f9e1c.qsyb%2FaySkiXNpkO4%25lkp@intel.com/
* tag 'fallthrough-pseudo-keyword-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: Use fallthrough pseudo-keyword
Leases don't currently work correctly on kcephfs, as they are not broken
when caps are revoked. They could eventually be implemented similarly to
how we did them in libcephfs, but for now don't allow them.
[ idryomov: no need for simple_nosetlease() in ceph_dir_fops and
ceph_snapdir_fops ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The alloc ucontext flow is always called with a valid udata, there's no
need to test whether it's NULL.
While at it, the 'udata->outlen' check is removed as well as we copy the
minimum between the size of the response and outlen, so in case of zero
outlen, zero bytes will be copied.
Link: https://lore.kernel.org/r/20200818110835.54299-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the kernel-doc documentation by matching between the functions
definitions and documentation.
Link: https://lore.kernel.org/r/20200820123512.105193-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Creating rxe device on top of vlan interface will create a non-functional
device that has an empty gids table and can't be used for rdma cm
communication.
This is caused by the logic in
enum_all_gids_of_dev_cb()/is_eth_port_of_netdev(), which only considers
networks connected to "upper devices" of the configured network device,
resulting in an empty set of gids for a vlan interface, and attempts to
connect via this rdma device fail in cm_init_av_for_response because no
gids can be resolved.
Apparently, this behavior was implemented to fit the HW-RoCE devices that
create RoCE device per port, therefore RXE must behave the same like
HW-RoCE devices and create rxe device per real device only.
In order to communicate via a vlan interface, the user must use the gid
index of the vlan address instead of creating rxe over vlan.
Link: https://lore.kernel.org/r/20200811150415.3693-1-goody698@gmail.com
Signed-off-by: Mohammad Heib <goody698@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tuan and Ulrich mentioned that they were hitting a problem on s390x,
which has a 32-bit ino_t value, even though it's a 64-bit arch (for
historical reasons).
I think the current handling of inode numbers in the ceph driver is
wrong. It tries to use 32-bit inode numbers on 32-bit arches, but that's
actually not a problem. 32-bit arches can deal with 64-bit inode numbers
just fine when userland code is compiled with LFS support (the common
case these days).
What we really want to do is just use 64-bit numbers everywhere, unless
someone has mounted with the ino32 mount option. In that case, we want
to ensure that we hash the inode number down to something that will fit
in 32 bits before presenting the value to userland.
Add new helper functions that do this, and only do the conversion before
presenting these values to userland in getattr and readdir.
The inode table hashvalue is changed to just cast the inode number to
unsigned long, as low-order bits are the most likely to vary anyway.
While it's not strictly required, we do want to put something in
inode->i_ino. Instead of basing it on BITS_PER_LONG, however, base it on
the size of the ino_t type.
NOTE: This is a user-visible change on 32-bit arches:
1/ inode numbers will be seen to have changed between kernel versions.
32-bit arches will see large inode numbers now instead of the hashed
ones they saw before.
2/ any really old software not built with LFS support may start failing
stat() calls with -EOVERFLOW on inode numbers >2^32. Nothing much we
can do about these, but hopefully the intersection of people running
such code on ceph will be very small.
The workaround for both problems is to mount with "-o ino32".
[ idryomov: changelog tweak ]
URL: https://tracker.ceph.com/issues/46828
Reported-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Reported-and-Tested-by: Tuan Hoang1 <Tuan.Hoang1@ibm.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The drm scheduler currently expects that the stop/start sequence is always
executed in the timeout handling, as the job at the head of the hardware
execution list is always removed from the ring mirror before the driver
function is called and only inserted back into the list when starting the
scheduler.
This adds some unnecessary overhead if the timeout handler determines
that the GPU is still executing jobs normally and just wished to extend
the timeout, but a better solution requires a major rearchitecture of the
scheduler, which is not applicable as a fix.
Fixes: 135517d356 ("drm/scheduler: Avoid accessing freed bad job.")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Russell King <rmk+kernel@armlinux.org.uk>
It looks like that this GPU core triggers an abort when
reading VIVS_HI_CHIP_PRODUCT_ID and/or VIVS_HI_CHIP_ECO_ID.
I looked at different versions of Vivante's kernel driver and did
not found anything about this issue or what feature flag can be
used. So go the simplest route and do not read these two registers
on the affected GPU core.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reported-by: Josua Mayer <josua.mayer@jm0.eu>
Fixes: 815e45bbd4 ("drm/etnaviv: determine product, customer and eco id")
Cc: stable@vger.kernel.org
Tested-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
There could be instances where a system stall prevents the timesync
packets to be consumed. And this might lead to more than one packet
pending in the ring buffer. Current code empties one packet per callback
and it might be a stale one. So drain all the packets from ring buffer
on each callback.
Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200821152849.99517-1-viremana@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
If for any reason, host timesync messages were not processed by
the guest, hv_ptp_gettime() returns a stale value and the
caller (clock_gettime, PTP ioctl etc) has no means to know this
now. Return an error so that the caller knows about this.
Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200821152523.99364-1-viremana@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
When scheduling delayed work to clean up the cache, if the entry already
has been scheduled for deletion, we adjust the delay.
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-7-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A CM REJ packet with its reason equal to timeout is a special beast in the
sense that it doesn't have a Remote Communication ID nor does it have a
Remote Port GID.
Using CX-3 virtual functions, either from a bare-metal machine or
pass-through from a VM, MAD packets are proxied through the PF driver.
Since the VF drivers have separate name spaces for MAD Transaction Ids
(TIDs), the PF driver has to re-map the TIDs and keep the book keeping
in a cache.
This proxying doesn't not handle said REJ packets.
If the active side abandons its connection attempt after having sent a
REQ, it will send a REJ with the reason being timeout. This example can be
provoked by a simple user-verbs program, which ends up doing:
rdma_connect(cm_id, &conn_param);
rdma_destroy_id(cm_id);
using the async librdmacm API.
Having dynamic debug prints enabled in the mlx4_ib driver, we will then
see:
mlx4_ib_demux_cm_handler: Couldn't find an entry for pv_cm_id 0x0, attr_id 0x12
The solution is to introduce a radix-tree. When a REQ packet is received
and handled in mlx4_ib_demux_cm_handler(), we know the connecting peer's
para-virtual cm_id and the destination slave. We then insert an entry into
the tree with said information. We also schedule work to remove this entry
from the tree and free it, in order to avoid memory leak.
When a REJ packet with reason timeout is received, we can look up the
slave in the tree, and deliver the packet to the correct slave.
When a duplicate REQ packet is received, the entry is in the tree. In this
case, we adjust the delayed work in order to avoid a too premature
eviction of the entry.
When cleaning up, we simply traverse the tree and modify any delayed work
to use a zero delay. A subsequent flush of the system_wq will ensure all
entries being wiped out.
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-6-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The mlx4 driver will proxy MAD packets through the PF driver. A VM or an
instantiated VF will send its MAD packets to the PF driver using
loop-back. The PF driver will be informed by an interrupt, but defer the
handling and polling of CQEs to a worker thread running on an ordered
work-queue.
Consider the following scenario: the VMs will in short proximity in time,
for example due to a network event, send many MAD packets to the PF
driver. Lets say there are K VMs, each sending N packets.
The interrupt from the first VM will start the worker thread, which will
poll N CQEs. A common case here is where the PF driver will multiplex the
packets received from the VMs out on the wire QP.
But before the wire QP has returned a send CQE and associated interrupt,
the other K - 1 VMs have sent their N packets as well.
The PF driver has to multiplex K * N packets out on the wire QP. But the
send-queue on the wire QP has a finite capacity.
So, in this scenario, if K * N is larger than the send-queue capacity of
the wire QP, we will get MAD packets dropped on the floor with this
dynamic debug message:
mlx4_ib_multiplex_mad: failed sending GSI to wire on behalf of slave 2 (-11)
and this despite the fact that the wire send-queue could have capacity,
but the PF driver isn't aware, because the wire send CQEs have not yet
been polled.
We can also have a similar scenario inbound, with a wire recv-queue larger
than the tunnel QP's send-queue. If many remote peers send MAD packets to
the very same VM, the tunnel send-queue destined to the VM could allegedly
be construed to be full by the PF driver.
This starvation is fixed by introducing separate work queues for the wire
QPs vs. the tunnel QPs.
With this fix, using a dual ported HCA, 8 VFs instantiated, we could run
cmtime on each of the 18 interfaces towards a similar configured peer,
each cmtime instance with 800 QPs (all in all 14400 QPs) without a single
CM packet getting lost.
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-5-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Using CX-3 in virtualized mode, MAD packets are proxied through the PF
driver. The feed is N tunnel QPs, and what is received from the VFs is
multiplexed out on the wire QP. Since this is a many-to-one scenario, it
is better to have separate initialization parameters for the two usages.
The number of wire and tunnel bufs are yanked up to 2K and 512
respectively. With this set of parameters, a system consisting of eight
physical servers, each with eight VMs and 14 I/O servers (BM), can run
switch fail-over without seeing:
mlx4_ib_demux_mad: failed sending GSI to slave 3 via tunnel qp (-11)
or
mlx4_ib_multiplex_mad: failed sending GSI to wire on behalf of slave 2 (-11)
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-4-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Using CX-3 in virtualized mode, MAD packets are proxied through the PF
driver. However, the handling lacks support of the MRA (Message Receipt
Acknowledgment) packet. When having dynamic debug enabled, we see tons of:
mlx4_ib_multiplex_cm_handler: id{slave: 7, sl_cm_id: 0x8fcb45a0} is NULL! attr_id: 0x11
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-3-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add missing check for success after call to mlx4_ib_send_to_wire() in
mlx4_ib_multiplex_mad().
Amended the existing pr_debug() in mlx4_ib_multiplex_cm_handler() and
mlx4_ib_demux_cm_handler() with attr_id during a lookup failure.
Removed two noisy pr_debug() in mad.c
Fixes: 3cf69cc8db ("IB/mlx4: Add CM paravirtualization")
Link: https://lore.kernel.org/r/20200803061941.1139994-2-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The pdev.mfd_cell is released by platform_device_release(), which is
invoked by platform_device_unregister(). Hence mfd_remove_devices_fn()
shouldn't release the cell variable. The double-free bug is reported KASAN
during of MFD driver module removal.
Fixes: 466a62d764 ("mfd: core: Make a best effort attempt to match devices with the correct of_nodes")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
When a log flush fails due to io errors, it signals the failure but does
not clean up after itself very well. This is because buffers are added to
the transaction tr_buf and tr_databuf queue, but the io error causes
gfs2_log_flush to bypass the "after_commit" functions responsible for
dequeueing the bd elements. If the bd elements are added to the ail list
before the error, function ail_drain takes care of dequeueing them.
But if they haven't gotten that far, the elements are forgotten and
make the transactions unable to be freed.
This patch introduces new function trans_drain which drains the bd
elements from the transaction so they can be freed properly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Fix documentation build warning and sentence wording:
Documentation/admin-guide/pm/intel_pstate.rst:568: WARNING: Unexpected indentation.
Fixes: f473bf398b ("cpufreq: intel_pstate: Allow raw energy performance preference value")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since SAO support was removed from ISA 3.1, skip the
prot_sao test if PPC_FEATURE2_ARCH_3_1 is set.
Signed-off-by: Shawn Anastasio <shawn@anastas.io>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821185558.35561-4-shawn@anastas.io
Since migration of guests using SAO to ISA 3.1 hosts may cause issues,
disable PROT_SAO in LPARs by default and introduce a new Kconfig option
PPC_PROT_SAO_LPAR to allow users to enable it if desired.
Signed-off-by: Shawn Anastasio <shawn@anastas.io>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821185558.35561-3-shawn@anastas.io
This reverts commit 5c9fa16e8a.
Since PROT_SAO can still be useful for certain classes of software,
reintroduce it. Concerns about guest migration for LPARs using SAO
will be addressed next.
Signed-off-by: Shawn Anastasio <shawn@anastas.io>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821185558.35561-2-shawn@anastas.io
binfmt_flat loader uses the gap between text and data to store data
segment pointers for the libraries. Even in the absence of shared
libraries it stores at least one pointer to the executable's own data
segment. Text and data can go back to back in the flat binary image and
without offsetting data segment last few instructions in the text
segment may get corrupted by the data segment pointer.
Fix it by reverting commit a2357223c5 ("binfmt_flat: don't offset the
data start").
Cc: stable@vger.kernel.org
Fixes: a2357223c5 ("binfmt_flat: don't offset the data start")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Add perf support for emitting extended registers for power10.
A fix for CPU hotplug on pseries, where on large/loaded systems we may not wait
long enough for the CPU to be offlined, leading to crashes.
Addition of a raw cputable entry for Power10, which is not required to boot, but
is required to make our PMU setup work correctly in guests.
Three fixes for the recent changes on 32-bit Book3S to move modules into their
own segment for strict RWX.
A fix for a recent change in our powernv PCI code that could lead to crashes.
A change to our perf interrupt accounting to avoid soft lockups when using some
events, found by syzkaller.
A change in the way we handle power loss events from the hypervisor on pseries.
We no longer immediately shut down if we're told we're running on a UPS.
A few other minor fixes.
Thanks to:
Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar,
Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz, Kajol Jain,
Madhavan Srinivasan, Michael Neuling, Michael Roth, Nageswara R Sastry, Oliver
O'Halloran, Thiago Jung Bauermann, Vaidyanathan Srinivasan, Vasant Hegde.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl9CYMwTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgC/wEACljEVnfHzUObmIgqn9Ru3JlfEI6Hlk
ts7kajCgS/I/bV6DoDMZ8rlZX87QFOwiBkNM1I+vGHSLAuzsmFAnbFPyxw/idxpQ
XUoNy8OCvbbzCPzChYdiU0PxW2h2i+QxkmktlWSN1SAPudJUWvoPS2Y4+sC4zksk
B4B6tbW2DT8TFO1kKeZsU9r2t+EH5KwlIOi+uxbH8d76lJINKkBNSnjzMytl7drM
TZx/HWr8+s/WJo1787x6bv8gxs5tV9b4vIKt2YZNTY2kvYsEDE+fBR1XfCAneXMw
ASYnZV+/xCLIUpRF6DI4RAShLBT/Sfiy1yMTndZgfqAgquokFosszNx2zrk0IzCd
AgqX93YGbGz/H72W3Y/B0W9+74XyO/u2D9zhNpkCRMpdcsM5MbvOQrQA5Ustu47E
av5MOaF/nNCd8J+OC4Qjgt5VFb/s0h4FdtrwT80srOa2U6Of9cD/T6xAfOszSJ96
cWdSb5qhn5wuD9pP32KjwdmWBiUw38/gnRGKpRlOVzyHL/GKZijyaBbWBlkoEmty
0nbjWW/IVfsOb5Weuiybg541h/QOVuOkb2pOvPClITiH83MY/AciDJ+auo4M//hW
haKz9IgV/KctmzDE+v9d0BD8sGmW03YUcQAPdRufI0eGXijDLcnHeuk2B3Nu84Pq
8mtev+VQ+T6cZA==
=sdJ1
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Add perf support for emitting extended registers for power10.
- A fix for CPU hotplug on pseries, where on large/loaded systems we
may not wait long enough for the CPU to be offlined, leading to
crashes.
- Addition of a raw cputable entry for Power10, which is not required
to boot, but is required to make our PMU setup work correctly in
guests.
- Three fixes for the recent changes on 32-bit Book3S to move modules
into their own segment for strict RWX.
- A fix for a recent change in our powernv PCI code that could lead to
crashes.
- A change to our perf interrupt accounting to avoid soft lockups when
using some events, found by syzkaller.
- A change in the way we handle power loss events from the hypervisor
on pseries. We no longer immediately shut down if we're told we're
running on a UPS.
- A few other minor fixes.
Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T
Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz,
Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth,
Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann,
Vaidyanathan Srinivasan, Vasant Hegde.
* tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver
powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000
powerpc/pseries: Do not initiate shutdown when system is running on UPS
powerpc/perf: Fix soft lockups due to missed interrupt accounting
powerpc/powernv/pci: Fix possible crash when releasing DMA resources
powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death
powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined
powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32
powerpc/fixmap: Fix the size of the early debug area
powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled
powerpc/kernel: Cleanup machine check function declarations
powerpc: Add POWER10 raw mode cputable entry
powerpc/perf: Add extended regs support for power10 platform
powerpc/perf: Add support for outputting extended regs in perf intr_regs
powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
path and unconditionally uses LSL to retrieve the CPU number. RDPID depends
on MSR_TSX_AUX. KVM has an optmization to avoid expensive MRS read/writes
on VMENTER/EXIT. It caches the MSR values and restores them either when
leaving the run loop, on preemption or when going out to user
space. MSR_TSX_AUX is part of that lazy MSR set, so after writing the guest
value and before the lazy restore any exception using the paranoid entry
will read the guest value and use it as CPU number to retrieve the GSBASE
value for the current CPU when FSGSBASE is enabled. As RDPID is only used
in that particular entry path, there is no reason to burden VMENTER/EXIT
with two extra MSR writes. Remove the RDPID optimization, which is not even
backed by numbers from the paranoid entry path instead.
-----BEGIN PGP SIGNATURE-----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=AEel
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for x86 which removes the RDPID usage from the paranoid
entry path and unconditionally uses LSL to retrieve the CPU number.
RDPID depends on MSR_TSX_AUX. KVM has an optmization to avoid
expensive MRS read/writes on VMENTER/EXIT. It caches the MSR values
and restores them either when leaving the run loop, on preemption or
when going out to user space. MSR_TSX_AUX is part of that lazy MSR
set, so after writing the guest value and before the lazy restore any
exception using the paranoid entry will read the guest value and use
it as CPU number to retrieve the GSBASE value for the current CPU when
FSGSBASE is enabled. As RDPID is only used in that particular entry
path, there is no reason to burden VMENTER/EXIT with two extra MSR
writes. Remove the RDPID optimization, which is not even backed by
numbers from the paranoid entry path instead"
* tag 'x86-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Do not use RDPID in paranoid entry to accomodate KVM
broken down bandwith counters.
-----BEGIN PGP SIGNATURE-----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=vF1u
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Thomas Gleixner:
"A single update for perf on x86 which has support for the broken down
bandwith counters"
* tag 'perf-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add BW counters for GT, IA and IO breakdown
- Enforce NX on RO data in mixed EFI mode
- Destroy workqueue in an error handling path to prevent UAF
- Stop argument parser at '--' which is the delimiter for init
- Treat a NULL command line pointer as empty instead of dereferncing it
unconditionally.
- Handle an unterminated command line correctly
- Cleanup the 32bit code leftovers and remove obsolete documentation
-----BEGIN PGP SIGNATURE-----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=+nbs
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Thomas Gleixner:
- Enforce NX on RO data in mixed EFI mode
- Destroy workqueue in an error handling path to prevent UAF
- Stop argument parser at '--' which is the delimiter for init
- Treat a NULL command line pointer as empty instead of dereferncing it
unconditionally.
- Handle an unterminated command line correctly
- Cleanup the 32bit code leftovers and remove obsolete documentation
* tag 'efi-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: efi: remove description of efi=old_map
efi/x86: Move 32-bit code into efi_32.c
efi/libstub: Handle unterminated cmdline
efi/libstub: Handle NULL cmdline
efi/libstub: Stop parsing arguments at "--"
efi: add missed destroy_workqueue when efisubsys_init fails
efi/x86: Mark kernel rodata non-executable for mixed mode
version messed up the reload of the syscall number from pt_regs after
ptrace and seccomp which breaks syscall number rewriting.
-----BEGIN PGP SIGNATURE-----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=2OhI
-----END PGP SIGNATURE-----
Merge tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull entry fix from Thomas Gleixner:
"A single bug fix for the common entry code.
The transcription of the x86 version messed up the reload of the
syscall number from pt_regs after ptrace and seccomp which breaks
syscall number rewriting"
* tag 'core-urgent-2020-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
core/entry: Respect syscall number rewrites
which lead to a recoverable error getting marked as fatal, by Tony
Luck.
-----BEGIN PGP SIGNATURE-----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=RYEr
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
"A single fix correcting a reversed error severity determination check
which lead to a recoverable error getting marked as fatal, by Tony
Luck"
* tag 'edac_urgent_for_v5.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/{i7core,sb,pnd2,skx}: Fix error event severity
Pull networking fixes from David Miller:
"Nothing earth shattering here, lots of small fixes (f.e. missing RCU
protection, bad ref counting, missing memset(), etc.) all over the
place:
1) Use get_file_rcu() in task_file iterator, from Yonghong Song.
2) There are two ways to set remote source MAC addresses in macvlan
driver, but only one of which validates things properly. Fix this.
From Alvin Šipraga.
3) Missing of_node_put() in gianfar probing, from Sumera
Priyadarsini.
4) Preserve device wanted feature bits across multiple netlink
ethtool requests, from Maxim Mikityanskiy.
5) Fix rcu_sched stall in task and task_file bpf iterators, from
Yonghong Song.
6) Avoid reset after device destroy in ena driver, from Shay
Agroskin.
7) Missing memset() in netlink policy export reallocation path, from
Johannes Berg.
8) Fix info leak in __smc_diag_dump(), from Peilin Ye.
9) Decapsulate ECN properly for ipv6 in ipv4 tunnels, from Mark
Tomlinson.
10) Fix number of data stream negotiation in SCTP, from David Laight.
11) Fix double free in connection tracker action module, from Alaa
Hleihel.
12) Don't allow empty NHA_GROUP attributes, from Nikolay Aleksandrov"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: nexthop: don't allow empty NHA_GROUP
bpf: Fix two typos in uapi/linux/bpf.h
net: dsa: b53: check for timeout
tipc: call rcu_read_lock() in tipc_aead_encrypt_done()
net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow
net: sctp: Fix negotiation of the number of data streams.
dt-bindings: net: renesas, ether: Improve schema validation
gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY
hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()
hv_netvsc: Remove "unlikely" from netvsc_select_queue
bpf: selftests: global_funcs: Check err_str before strstr
bpf: xdp: Fix XDP mode when no mode flags specified
selftests/bpf: Remove test_align leftovers
tools/resolve_btfids: Fix sections with wrong alignment
net/smc: Prevent kernel-infoleak in __smc_diag_dump()
sfc: fix build warnings on 32-bit
net: phy: mscc: Fix a couple of spelling mistakes "spcified" -> "specified"
libbpf: Fix map index used in error message
net: gemini: Fix missing free_netdev() in error path of gemini_ethernet_port_probe()
net: atlantic: Use readx_poll_timeout() for large timeout
...
Don't forget to update wqe->hash_tail after cancelling a pending work
item, if it was hashed.
Cc: stable@vger.kernel.org # 5.7+
Reported-by: Dmitry Shulyak <yashulyak@gmail.com>
Fixes: 86f3cd1b58 ("io-wq: handle hashed writes in chains")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
