Danit Goldberg says:
Packet based credit mode
Packet based credit mode is an alternative end-to-end credit mode for QPs
set during their creation. Credits are transported from the responder to
the requester to optimize the use of its receive resources. In
packet-based credit mode, credits are issued on a per packet basis.
The advantage of this feature comes while sending large RDMA messages
through switches that are short in memory.
The first commit exposes QP creation flag and the HCA capability. The
second commit adds support for a new DV QP creation flag. The last commit
report packet based credit mode capability via the MLX5DV device
capabilities.
* branch 'mlx5-packet-credit-fc':
IB/mlx5: Report packet based credit mode device capability
IB/mlx5: Add packet based credit mode support
net/mlx5: Expose packet based credit mode
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The device can support two credit modes, message based (default) and
packet based. In order to enable packet based mode, the QP should be
created with special flag that indicates this.
This patch adds support for the new DV QP creation flag that can be used
for RC QPs in order to change the credit mode.
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Allows XRC usage from the verbs flow in a DEVX context.
As XRCD is some shared kernel resource between processes it should be
created with UID=0 to point on that.
As a result once XRC QP/SRQ are created they must be used as well with
UID=0 so that firmware will allow the XRCD usage.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Enforce DEVX privilege by firmware, this enables future device
functionality without the need to make driver changes unless a new
privilege type will be introduced.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The enhanced devx support series needs commit:
9d43faac02 ("net/mlx5: Update mlx5_ifc with DEVX UCTX capabilities bits")
Signed-off-by: Doug Ledford <dledford@redhat.com>
Transfer initialization and cleanup from mlx5_priv struct of
mlx5_core_dev to be part of mlx5_ib_dev. This completes removal
of SRQ from mlx5_core.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reuse existing infrastructure to initialize and release DEVX uid.
The DevX interface is intended for user space access, so it is supposed
to be initialized before ib_register_device(). Also it isn't supported
in switchdev mode and don't need to initialize it in that mode.
Fixes: 76dc5a8406 ("IB/mlx5: Manage device uid for DEVX white list commands")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Remove the deprecated mlx5_interface->event mlx5_ib callback and use new
mlx5 notifier API to subscribe for mlx5 events.
For native mlx5_ib devices profiles pf_profile/nic_rep_profile register
the notifier callback mlx5_ib_handle_event which treats the notifier
context as mlx5_ib_dev.
For vport repesentors, don't register any notifier, same as before, they
didn't receive any mlx5 events.
For slave port (mlx5_ib_multiport_info) register a different notifier
callback mlx5_ib_event_slave_port, which knows that the event is coming
for mlx5_ib_multiport_info and prepares the event job accordingly.
Before this on the event handler work we had to ask mlx5_core if this is
a slave port mlx5_core_is_mp_slave(work->dev), now it is not needed
anymore.
mlx5_ib_multiport_info notifier registration is done on
mlx5_ib_bind_slave_port and de-registration is done on
mlx5_ib_unbind_slave_port.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The current implementation of create QP requires contiguous memory, such a
requirement is problematic once the memory is fragmented or the system is
low in memory, it causes failures in dma_zalloc_coherent().
This patch takes advantage of the new mlx5_core API which allocates a
fragmented buffer. This makes the QP creation much more resilient to
memory fragmentation. Data-path code was adapted to the fact that WQEs can
cross buffers.
We also use the opportunity to fix some cosmetic legacy coding convention
errors which were in the feature scope.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current implementation of create SRQ requires contiguous memory, such
a requirement is problematic once the memory is fragmented or the system
is low in memory, it causes failures in dma_zalloc_coherent().
This patch takes the advantage of the new mlx5_core API which allocates a
fragmented buffer, and makes the SRQ creation much more resilient to
memory fragmentation. Data-path code was adapted to the fact that WQEs can
cross buffers.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Allow a user to attach a DEVX counter via mlx5 raw flow creation. In order
to attach a counter we introduce a new attribute:
MLX5_IB_ATTR_CREATE_FLOW_ARR_COUNTERS_DEVX
A counter can be attached to multiple flow steering rules.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Rely on UAPI_DEF_IS_OBJ_SUPPORTED instead of manipulating the contents of
the driver's definition list.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The 'tree' data structure is very hard to build at compile time, and this
makes it very limited. The new radix tree based compiler can handle a more
complex input language that does not require the compiler to perfectly
group everything into a neat tree structure.
Instead use a simple list to describe to input, where the list elements
can be of various different 'opcodes' instructing the radix compiler what
to do. Start out with opcodes chaining to other definition lists and
chaining to the existing 'tree' definition.
Replace the very top level of the 'object tree' with this list type and
get rid of struct uverbs_object_tree_def and DECLARE_UVERBS_OBJECT_TREE.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Use the new generic EQ API to move all ODP RDMA data structures and logic
form mlx5 core driver into mlx5_ib driver.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
This has been a smaller cycle with many of the commits being smallish code
fixes and improvements across the drivers.
- Driver updates for bnxt_re, cxgb4, hfi1, hns, mlx5, nes, qedr, and rxe
- Memory window support in hns
- mlx5 user API 'flow mutate/steering' allows accessing the full packet
mangling and matching machinery from user space
- Support inter-working with verbs API calls in the 'devx' mlx5 user API, and
provide options to use devx with less privilege
- Modernize the use of syfs and the device interface to use attribute groups
and cdev properly for uverbs, and clean up some of the core code's device list
management
- More progress on net namespaces for RDMA devices
- Consolidate driver BAR mmapping support into core code helpers and rework
how RDMA holds poitners to mm_struct for get_user_pages cases
- First pass to use 'dev_name' instead of ib_device->name
- Device renaming for RDMA devices
-----BEGIN PGP SIGNATURE-----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=pacJ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has been a smaller cycle with many of the commits being smallish
code fixes and improvements across the drivers.
- Driver updates for bnxt_re, cxgb4, hfi1, hns, mlx5, nes, qedr, and
rxe
- Memory window support in hns
- mlx5 user API 'flow mutate/steering' allows accessing the full
packet mangling and matching machinery from user space
- Support inter-working with verbs API calls in the 'devx' mlx5 user
API, and provide options to use devx with less privilege
- Modernize the use of syfs and the device interface to use attribute
groups and cdev properly for uverbs, and clean up some of the core
code's device list management
- More progress on net namespaces for RDMA devices
- Consolidate driver BAR mmapping support into core code helpers and
rework how RDMA holds poitners to mm_struct for get_user_pages
cases
- First pass to use 'dev_name' instead of ib_device->name
- Device renaming for RDMA devices"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (242 commits)
IB/mlx5: Add support for extended atomic operations
RDMA/core: Fix comment for hw stats init for port == 0
RDMA/core: Refactor ib_register_device() function
RDMA/core: Fix unwinding flow in case of error to register device
ib_srp: Remove WARN_ON in srp_terminate_io()
IB/mlx5: Allow scatter to CQE without global signaled WRs
IB/mlx5: Verify that driver supports user flags
IB/mlx5: Support scatter to CQE for DC transport type
RDMA/drivers: Use core provided API for registering device attributes
RDMA/core: Allow existing drivers to set one sysfs group per device
IB/rxe: Remove unnecessary enum values
RDMA/umad: Use kernel API to allocate umad indexes
RDMA/uverbs: Use kernel API to allocate uverbs indexes
RDMA/core: Increase total number of RDMA ports across all devices
IB/mlx4: Add port and TID to MAD debug print
IB/mlx4: Enable debug print of SMPs
RDMA/core: Rename ports_parent to ports_kobj
RDMA/core: Do not expose unsupported counters
IB/mlx4: Refer to the device kobject instead of ports_parent
RDMA/nldev: Allow IB device rename through RDMA netlink
...
Take struct mlx5_frag_buf out of mlx5_frag_buf_ctrl, as it is not
needed to manage and control the datapath of the fragmented buffers API.
struct mlx5_frag_buf contains control info to manage the allocation
and de-allocation of the fragmented buffer.
Its fields are not relevant for datapath, so here I take them out of the
struct mlx5_frag_buf_ctrl, except for the fragments array itself.
In addition, modified mlx5_fill_fbc to initialise the frags pointers
as well. This implies that the buffer must be allocated before the
function is called.
A set of type-specific *_get_byte_size() functions are replaced by
a generic one.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Scatter to CQE is a HW offload that saves PCI writes by scattering the
payload to the CQE.
This patch extends already existing functionality to support DC
transport type.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use rdma_set_device_sysfs_group() to register device attributes and
simplify the driver.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Manage device uid for DEVX white list commands. The created device uid
will be used on white list commands if the user didn't supply its own uid.
This will enable the firmware to filter out non privileged functionality
as of the recognition of the uid.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Kernel convention is that a driver for a subsystem will print using
dev_* on the subsystem's struct device, or with dev_* on the physical
device. Drivers should rarely use a pr_* function.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of XRCD commands so that the firmware can manage the
XRCD object in a secured way.
That will enable using an XRCD that was created by verbs application
to be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Set uid as part of RQT commands so that the firmware can manage the
RQT object in a secured way.
That will enable using an RQT that was created by verbs application
to be used by the DEVX flow in case the uid is equal.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use uid as part of PD commands so that the firmware can manage the
PD object in a secured way.
For example when a QP is created its uid must match the CQ uid which it
uses.
Next patches in this series will use the uid from the PD, then will come
a patch to set the uid on the PD so that all objects will be properly
work in one change.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For dependencies, branch based on 'mlx5-next' of
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git
mlx5 mcast/ucast loopback control enhancements from Leon Romanovsky:
====================
This is short series from Mark which extends handling of loopback
traffic. Originally mlx5 IB dynamically enabled/disabled both unicast
and multicast based on number of users. However RAW ethernet QPs need
more granular access.
====================
Fixed failed automerge in mlx5_ib.h (minor context conflict issue)
mlx5-vport-loopback branch:
RDMA/mlx5: Enable vport loopback when user context or QP mandate
RDMA/mlx5: Allow creating RAW ethernet QP with loopback support
RDMA/mlx5: Refactor transport domain bookkeeping logic
net/mlx5: Rename incorrect naming in IFC file
Signed-off-by: Doug Ledford <dledford@redhat.com>
A user can create a QP which can accept loopback traffic, but that's not
enough. We need to enable loopback on the vport as well. Currently vport
loopback is enabled only when more than 1 users are using the IB device,
update the logic to consider whatever a QP which supports loopback was
created, if so enable vport loopback even if there is only a single user.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Expose two new flags:
MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_UC
MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_MC
Those flags can be used at creation time in order to allow a QP
to be able to receive loopback traffic (unicast and multicast).
We store the state in the QP to be used on the destroy path
to indicate with which flags the QP was created with.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In preparation to enable loopback on a single user context move the logic
that enables/disables loopback to separate functions and group variables
under a single struct.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
All of these functions already require the ODP version of the umem struct,
make this very clear by having the signature require it. This paves the
way to using the container_of() pattern to link umem_odp and umem
together.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rely on the new core code helper to map BAR memory from the driver.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add the ability to get a NIC TX flow table when using _get_flow_table().
This will allow to create a matcher and a flow rule on the NIC TX path.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Move struct mlx5_flow_act to be passed from the method entry point,
this will allow to add support for flow action for the raw create flow
path.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Make the parsing of flow actions more generic so it could be used by
mlx5 raw create flow.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Just like ingress steering, allow a user to create steering rules that
match egress vport traffic. We expose the same number of priorities as
the bypass (NIC RX) steering.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For dependencies, branch based on 'mellanox/mlx5-next' of
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git
Pull Flow actions to mutate packets from Leon Romanovsky:
====================
This series exposes the ability to create flow actions which can
mutate packet headers. We do that by exposing two new verbs:
* modify header - can change existing packet headers. packet
* reformat - can encapsulate or decapsulate a packet.
Once created a flow action must be attached to a steering
rule for it to take effect.
The first 10 patches refactor mlx5_core code, rename internal structures
to better reflect their operation and export needed functions so the RDMA
side can allocate the action.
The last 5 patches expose via the IOCTL infrastructure mlx5_ib methods
which do the actual allocation of resources and return an handle to the
user. A user of this API is expected to know how to work with the device's
spec as the input to those function is HW depended.
An example usage of the modify header action is routing, A user can create
an action which edits the L2 header and decrease the TTL.
An example usage of the packet reformat action is VXLAN encap/decap which
is done by the HW.
====================
* branch 'mlx5-flow-mutate':
RDMA/mlx5: Extend packet reformat verbs
RDMA/mlx5: Add new flow action verb - packet reformat
RDMA/uverbs: Add generic function to fill in flow action object
RDMA/mlx5: Add a new flow action verb - modify header
RDMA/uverbs: Add UVERBS_ATTR_CONST_IN to the specs language
net/mlx5: Export packet reformat alloc/dealloc functions
net/mlx5: Pass a namespace for packet reformat ID allocation
net/mlx5: Expose new packet reformat capabilities
{net, RDMA}/mlx5: Rename encap to reformat packet
net/mlx5: Move header encap type to IFC header file
net/mlx5: Break encap/decap into two separated flow table creation flags
net/mlx5: Add support for more namespaces when allocating modify header
net/mlx5: Export modify header alloc/dealloc functions
net/mlx5: Add proper NIC TX steering flow tables support
net/mlx5: Cleanup flow namespace getter switch logic
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We expose new actions:
L2_TO_L2_TUNNEL - A generic encap from L2 to L2, the data passed should
be the encapsulating headers.
L3_TUNNEL_TO_L2 - Will do decap where the inner packet starts from L3,
the data should be mac or mac + vlan (14 or 18 bytes).
L2_TO_L3_TUNNEL - Will do encap where is L2 of the original packet will
not be included, the data should be the encapsulating
header.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For now, only add L2_TUNNEL_TO_L2 option. This will allow to perform
generic decap operation if the encapsulating protocol is L2 based, and the
inner packet is also L2 based. For example this can be used to decap VXLAN
packets.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose the ability to create a flow action which changes packet
headers. The data passed from userspace should be modify header actions as
defined by HW specification.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the current code, the TX affinity is per RoCE device, which can cause
unfairness between different contexts. e.g. if we open two contexts, and
each open 10 QPs concurrently, all of the QPs of the first context might
end up on the first port instead of distributed on the two ports as
expected
To overcome this unfairness between processes, we maintain per device TX
affinity, and per process TX affinity.
The allocation algorithm is as follow:
1. Hold two tx_port_affinity atomic variables, one per RoCE device and one
per ucontext. Both initialized to 0.
2. In mlx5_ib_alloc_ucontext do:
2.1. ucontext.tx_port_affinity = device.tx_port_affinity
2.2. device.tx_port_affinity += 1
3. In modify QP INIT2RST:
3.1. qp.tx_port_affinity = ucontext.tx_port_affinity % MLX5_PORT_NUM
3.2. ucontext.tx_port_affinity += 1
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no reason for drivers to do this, the core code should take of
everything. The drivers will provide their information from rodata to
describe their modifications to the core's base uapi specification.
The core uses this to build up the runtime uapi for each device.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Since neither ib_post_send() nor ib_post_recv() modify the data structure
their second argument points at, declare that argument const. This change
makes it necessary to declare the 'bad_wr' argument const too and also to
modify all ULPs that call ib_post_send(), ib_post_recv() or
ib_post_srq_recv(). This patch does not change any functionality but makes
it possible for the compiler to verify whether the
ib_post_(send|recv|srq_recv) really do not modify the posted work request.
To make this possible, only one cast had to be introduce that casts away
constness, namely in rpcrdma_post_recvs(). The only way I can think of to
avoid that cast is to introduce an additional loop in that function or to
change the data type of bad_wr from struct ib_recv_wr ** into int
(an index that refers to an element in the work request list). However,
both approaches would require even more extensive changes than this
patch.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When posting a send work request, the work request that is posted is not
modified by any of the RDMA drivers. Make this explicit by constifying
most ib_send_wr pointers in RDMA transport drivers.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose the mlx5 flow steering parsing trees, exposing the functionality to
user space.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add support to set a public flow steering rule when its destination is a
TIR by using raw specification data.
The logic follows the verbs API but instead of using ib_spec(s) the raw,
device specific, description is used.
This allows supporting specialty matchers without having to define new
matches in the verbs struct based language.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce driver create and destroy flow methods on the uverbs flow
object.
This allows the driver to get its specific device attributes to match the
underlay specification while still using the generic ib_flow object for
cleanup and code sharing.
The IB object's attributes are set via the ib_set_flow() helper function.
The specific implementation for the given specification is added in
downstream patches.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce flow steering matcher object and its create and destroy methods.
This matcher object holds some mlx5 specific driver properties that
matches the underlay device specification when an mlx5 flow steering group
is created.
It will be used in downstream patches to be part of mlx5 specific create
flow method.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
User's supplied index is checked again total number of system pages, but
this number already includes num_static_sys_pages, so addition of that
value to supplied index causes to below error while trying to access
sys_pages[].
BUG: KASAN: slab-out-of-bounds in bfregn_to_uar_index+0x34f/0x400
Read of size 4 at addr ffff880065561904 by task syz-executor446/314
CPU: 0 PID: 314 Comm: syz-executor446 Not tainted 4.18.0-rc1+ #256
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0xef/0x17e
print_address_description+0x83/0x3b0
kasan_report+0x18d/0x4d0
bfregn_to_uar_index+0x34f/0x400
create_user_qp+0x272/0x227d
create_qp_common+0x32eb/0x43e0
mlx5_ib_create_qp+0x379/0x1ca0
create_qp.isra.5+0xc94/0x22d0
ib_uverbs_create_qp+0x21b/0x2a0
ib_uverbs_write+0xc2c/0x1010
vfs_write+0x1b0/0x550
ksys_write+0xc6/0x1a0
do_syscall_64+0xa7/0x590
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x433679
Code: fd ff 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 91 fd ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff2b3d8e48 EFLAGS: 00000217 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433679
RDX: 0000000000000040 RSI: 0000000020000240 RDI: 0000000000000003
RBP: 00000000006d4018 R08: 00000000004002f8 R09: 00000000004002f8
R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000
R13: 000000000040cb00 R14: 000000000040cb90 R15: 0000000000000006
Allocated by task 314:
kasan_kmalloc+0xa0/0xd0
__kmalloc+0x1a9/0x510
mlx5_ib_alloc_ucontext+0x966/0x2620
ib_uverbs_get_context+0x23f/0xa60
ib_uverbs_write+0xc2c/0x1010
__vfs_write+0x10d/0x720
vfs_write+0x1b0/0x550
ksys_write+0xc6/0x1a0
do_syscall_64+0xa7/0x590
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 1:
__kasan_slab_free+0x12e/0x180
kfree+0x159/0x630
kvfree+0x37/0x50
single_release+0x8e/0xf0
__fput+0x2d8/0x900
task_work_run+0x102/0x1f0
exit_to_usermode_loop+0x159/0x1c0
do_syscall_64+0x408/0x590
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff880065561100
which belongs to the cache kmalloc-4096 of size 4096
The buggy address is located 2052 bytes inside of
4096-byte region [ffff880065561100, ffff880065562100)
The buggy address belongs to the page:
page:ffffea0001955800 count:1 mapcount:0 mapping:ffff88006c402480 index:0x0 compound_mapcount: 0
flags: 0x4000000000008100(slab|head)
raw: 4000000000008100 ffffea0001a7c000 0000000200000002 ffff88006c402480
raw: 0000000000000000 0000000080070007 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff880065561800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff880065561880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff880065561900: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff880065561980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff880065561a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Cc: <stable@vger.kernel.org> # 4.15
Fixes: 1ee47ab3e8 ("IB/mlx5: Enable QP creation with a given blue flame index")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need for three consecutive calls to alloc_bfreg(). It can be
implemented with one function.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch follows the logic from ib_core but considers the internal
device state upon executing the involved commands.
Specifically,
Upon internal error state modify QP to an error state can be assumed to
be success as each in-progress WR going to be flushed in error in any
case as expected by that modify command.
In addition,
As the drain should never fail the driver makes sure that post_send/recv
will succeed even if the device is already in an internal error state.
As such once the driver will supply the simulated/SW CQEs the CQE for
the drain WR will be handled as well.
In case of an internal error state the CQE for the drain WR may be
completed as part of the main task that handled the error state or by
the task that issued the drain WR.
As the above depends on scheduling the code takes the relevant locks and
actions to make sure that the completion handler for that WR will always
be called after that the post_send/recv were issued but not in parallel
to the other task that handles the error flow.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
For dependencies, branch based on 'mellanox/mlx5-next' of
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git
Pull RoCE ICRC counters from Leon Romanovsky:
====================
This series exposes RoCE ICRC counter through existing RDMA hw_counters
sysfs interface.
The first patch has all HW definitions in mlx5_ifc.h file and second patch
is the actual counter implementation.
====================
* branch 'icrc-counter':
IB/mlx5: Support RoCE ICRC encapsulated error counter
net/mlx5: Add RoCE RX ICRC encapsulated counter
This patch adds support to query the counter that counts the
RoCE packets with corrupted ICRC (Invariant Cyclic Redundancy Code).
This counter will be under
/sys/class/infiniband/<mlx5-dev>/ports/<port>/hw_counters/
rx_icrc_encapsulated - The number of RoCE packets with ICRC
error.
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose DEVX tree to be used by upper layers.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Return a device UAR index for a given user index via the DEVX interface.
Security note:
The hardware protection mechanism works like this: Each device object that
is subject to UAR doorbells (QP/SQ/CQ) gets a UAR ID (called uar_page in
the device specification manual) upon its creation. Then upon doorbell,
hardware fetches the object context for which the doorbell was rang, and
validates that the UAR through which the DB was rang matches the UAR ID
of the object.
If no match the doorbell is silently ignored by the hardware. Of
course, the user cannot ring a doorbell on a UAR that was not mapped to
it.
Now in devx, as the devx kernel does not manipulate the QP/SQ/CQ command
mailboxes (except tagging them with UID), we expose to the user its UAR
ID, so it can embed it in these objects in the expected specification
format. So the only thing the user can do is hurt itself by creating a
QP/SQ/CQ with a UAR ID other than his, and then in this case other users
may ring a doorbell on its objects.
The consequence of that will be that another user can schedule a QP/SQ
of the buggy user for execution (just insert it to the hardware schedule
queue or arm its CQ for event generation), no further harm is expected.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce DEVX to enable direct device commands in downstream patches
from this series.
In that mode of work the firmware manages the isolation between
processes' resources and as such a DEVX user id is created and assigned
to the given user context upon allocation request.
A capability check is done to make sure that this feature is really
supported by the firmware prior to creating the DEVX user id.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The core code now ensures that all driver callbacks that receive an
rdma_ah_attrs will have a sgid_attr's pointer if there is a GRH present.
Drivers can use this pointer instead of calling a query function with
sgid_index. This simplifies the drivers and also avoids races where a
gid_index lookup may return different data if it is changed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Associates a counters with a flow when IB_FLOW_SPEC_ACTION_COUNT is part
of the flow specifications.
The counters user space placements of location and description (index,
description) pairs are passed as private data of the counters flow
specification.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch implements the device counters create and destroy APIs and
introducing some internal management structures.
Downstream patches in this series will add the functionality to support
flow counters binding and reading.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding mlx5_ib driver implementation for reg_dm_mr callback
which allows registering device memory (DM) as an MR for
local and remote access.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds the mlx5_ib driver implementation for the device
memory allocation API.
It implements the ib_device callbacks for allocation and deallocation
operations as well as a new mmap command support which allows mapping
an allocated device memory to a VMA.
The change also adds reporting of device memory maximum size and
alignment parameters reported in device capabilities.
The allocation/deallocation operations are using new firmware
commands to allocate MEMIC memory on the device.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This commit introduces support for the esp_aes_gcm flow
specification for the Innova device. To that end we add
support for egress steering and some validations that an
IPsec rule is indeed valid.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding implementation in mlx5 driver to create and destroy action_xfrm
object. This merely call the accel layer.
A user may pass MLX5_IB_XFRM_FLAGS_REQUIRE_METADATA flag which states
that [s]he expects a metadata header to be added to the payload. This
header represents information regarding the transformation's state.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In order to have a custom parsing tree, a provider driver needs to
assign its parsing tree to ib_device specs_tree field. Otherwise, the
uverbs client assigns a common default parsing tree for it.
In downstream patches, the mlx5_ib driver gains a custom parsing tree,
which contains both the common objects and a new flags field for the
UVERBS_FLOW_ACTION_ESP_CREATE command.
This patch makes mlx5_ib assign its own tree to specs_root, which
later on will be extended.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Enable RAW QP to be able to configure burst control by modify_qp. By
using burst control with rate limiting, user can achieve best
performance and accuracy. The burst control information is passed by
user through udata.
This patch also reports burst control capability for mlx5 related
hardwares, burst control is only marked as supported when both
packet_pacing_burst_bound and packet_pacing_typical_size are
supported.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Due to bug fixes found by the syzkaller bot and taken into the for-rc
branch after development for the 4.17 merge window had already started
being taken into the for-next branch, there were fairly non-trivial
merge issues that would need to be resolved between the for-rc branch
and the for-next branch. This merge resolves those conflicts and
provides a unified base upon which ongoing development for 4.17 can
be based.
Conflicts:
drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f95
(IB/mlx5: Fix cleanup order on unload) added to for-rc and
commit b5ca15ad7e (IB/mlx5: Add proper representors support)
add as part of the devel cycle both needed to modify the
init/de-init functions used by mlx5. To support the new
representors, the new functions added by the cleanup patch
needed to be made non-static, and the init/de-init list
added by the representors patch needed to be modified to
match the init/de-init list changes made by the cleanup
patch.
Updates:
drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
prototypes added by representors patch to reflect new function
names as changed by cleanup patch
drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
stage list to match new order from cleanup patch
Signed-off-by: Doug Ledford <dledford@redhat.com>
On load we create private CQ/QP/PD in order to be used by UMR, we create
those resources after we register ourself as an IB device, and we destroy
them after we unregister as an IB device. This was changed by commit
16c1975f10 ("IB/mlx5: Create profile infrastructure to add and remove
stages") which moved the destruction before we unregistration. This
allowed to trigger an invalid memory access when unloading mlx5_ib while
there are open resources:
BUG: unable to handle kernel paging request at 00000001002c012c
...
Call Trace:
mlx5_ib_post_send_wait+0x75/0x110 [mlx5_ib]
__slab_free+0x9a/0x2d0
delay_time_func+0x10/0x10 [mlx5_ib]
unreg_umr.isra.15+0x4b/0x50 [mlx5_ib]
mlx5_mr_cache_free+0x46/0x150 [mlx5_ib]
clean_mr+0xc9/0x190 [mlx5_ib]
dereg_mr+0xba/0xf0 [mlx5_ib]
ib_dereg_mr+0x13/0x20 [ib_core]
remove_commit_idr_uobject+0x16/0x70 [ib_uverbs]
uverbs_cleanup_ucontext+0xe8/0x1a0 [ib_uverbs]
ib_uverbs_cleanup_ucontext.isra.9+0x19/0x40 [ib_uverbs]
ib_uverbs_remove_one+0x162/0x2e0 [ib_uverbs]
ib_unregister_device+0xd4/0x190 [ib_core]
__mlx5_ib_remove+0x2e/0x40 [mlx5_ib]
mlx5_remove_device+0xf5/0x120 [mlx5_core]
mlx5_unregister_interface+0x37/0x90 [mlx5_core]
mlx5_ib_cleanup+0xc/0x225 [mlx5_ib]
SyS_delete_module+0x153/0x230
do_syscall_64+0x62/0x110
entry_SYSCALL_64_after_hwframe+0x21/0x86
...
We restore the original behavior by breaking the UMR stage into two parts,
pre and post IB registration stages, this way we can restore the original
functionality and maintain clean separation of logic between stages.
Fixes: 16c1975f10 ("IB/mlx5: Create profile infrastructure to add and remove stages")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The mlx5 driver needs to be able to issue invalidation to ODP MRs
even if it cannot allocate memory. To this end it preallocates
emergency pages to use when the situation arises.
This flow should be extremely rare enough, that we don't need
to worry about contention and therefore a single emergency page
is good enough.
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This commit adds full support for IB representor:
1) Representors profile, We add two new profiles:
nic_rep_profile - This profile will be used to create an IB device that
represents the PF/UPLINK.
rep_profile - This profile will be used to create an IB device that
represents VFs. Each VF will be its own representor.
2) Proper load/unload callbacks, Those are called by the E-Switch when
moving to/from switchdev mode.
3) Different flow DB handling for when we in switchdev mode.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In order to forward traffic from representor's SQ to the right virtual
function, every time an SQ is created also add the corresponding flow rule
to the FDB.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently in switchdev mode we allow only for raw packet QPs.
Expose the right capabilities and set the gid table length to 0, also
make sure we don't try to enable RoCE, so split the function
to enable RoCE so representors can enable only the notifier needed for
net device events.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
A flow DB is a shared resource between PF and representors,
need to allocate it only when creating the PF IB device.
Once we add IB representors, they will use the flow db which was
created by the PF.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Create the basic infrastructure of registering and unregistering
IB representors. The load/unload callbacks are left empty and
proper implementation will be introduced in following patches.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The current implementation of create CQ requires contiguous
memory, such requirement is problematic once the memory is
fragmented or the system is low in memory, it causes for
failures in dma_zalloc_coherent().
This patch implements new scheme of fragmented CQ to overcome
this issue by introducing new type: 'struct mlx5_frag_buf_ctrl'
to allocate fragmented buffers, rather than contiguous ones.
Base the Completion Queues (CQs) on this new fragmented buffer.
It fixes following crashes:
kworker/29:0: page allocation failure: order:6, mode:0x80d0
CPU: 29 PID: 8374 Comm: kworker/29:0 Tainted: G OE 3.10.0
Workqueue: ib_cm cm_work_handler [ib_cm]
Call Trace:
[<>] dump_stack+0x19/0x1b
[<>] warn_alloc_failed+0x110/0x180
[<>] __alloc_pages_slowpath+0x6b7/0x725
[<>] __alloc_pages_nodemask+0x405/0x420
[<>] dma_generic_alloc_coherent+0x8f/0x140
[<>] x86_swiotlb_alloc_coherent+0x21/0x50
[<>] mlx5_dma_zalloc_coherent_node+0xad/0x110 [mlx5_core]
[<>] ? mlx5_db_alloc_node+0x69/0x1b0 [mlx5_core]
[<>] mlx5_buf_alloc_node+0x3e/0xa0 [mlx5_core]
[<>] mlx5_buf_alloc+0x14/0x20 [mlx5_core]
[<>] create_cq_kernel+0x90/0x1f0 [mlx5_ib]
[<>] mlx5_ib_create_cq+0x3b0/0x4e0 [mlx5_ib]
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The flags field the enum is used with comes directly from the uapi
so it belongs in the uapi headers for clarity and so userspace can
use it.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch maps the new page to user space applications to
allow converting a user space completion timestamp to system wall
time at the lowest possible latency cost.
By using a versioning scheme we allow compatibility between current
and future userspace libraries.
The change moves mlx5_ib_mmap_cmd enum from mlx5_ib.h to the
abi header file mlx5-abi.h.
Reviewed-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Eitan Rabin <rabin@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Update the counter interface for multiple ports. Some counter sets
always comes from the primary device.
Port specific counters should be accessed per mlx5_core_dev not always
through the IB master mdev.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When there are multiple ports for single IB(RoCE) device, support
debugfs entries to be available for each port.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When mlx5_ib_add is called determine if the mlx5 core device being
added is capable of dual port RoCE operation. If it is, determine
whether it is a master device or a slave device using the
num_vhca_ports and affiliate_nic_vport_criteria capabilities.
If the device is a slave, attempt to find a master device to affiliate it
with. Devices that can be affiliated will share a system image guid. If
none are found place it on a list of unaffiliated ports. If a master is
found bind the port to it by configuring the port affiliation in the NIC
vport context.
Similarly when mlx5_ib_remove is called determine the port type. If it's
a slave port, unaffiliate it from the master device, otherwise just
remove it from the unaffiliated port list.
The IB device is registered as a multiport device, even if a 2nd port is
not available for affiliation. When the 2nd port is affiliated later the
GID cache must be refreshed in order to get the default GIDs for the 2nd
port in the cache. Export roce_rescan_device to provide a mechanism to
refresh the cache after a new port is bound.
In a multiport configuration all IB object (QP, MR, PD, etc) related
commands should flow through the master mlx5_core_dev, other commands
must be sent to the slave port mlx5_core_mdev, an interface is provide
to get the correct mdev for non IB object commands.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When multiple RoCE ports are supported registration for events on
multiple netdevs is required. Refactor the event registration and
handling to support multiple ports.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A DC Target (DCT) QP is represented in the hardware as a unique object.
This object is created by CREATE_DCT command and destroyed by DESTROY_DCT
command. However, in the driver we describe it as a QP.
The hardware command that creates a DCT needs parameters that the verb
create_qp() does not provide. Those remaining parameters are provided
with the call to the verb modify_qp(). Therefore we delay the actual
creation of a DCT in the hardware until the stage of modify_qp() to RTR.
A support for query_qp() was added as well. It uses QUERY_DCT command to
retrieve the applicable fields.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The QP type IB_QPT_DRIVER doesn't describe the transport or the service
that the QP provides but those are known only to the hardware driver.
The actual type of the QP is stored in the hardware driver context (i.e.
mlx5_qp) under the field qp_sub_type.
Take the real QP type and any extra data that is required to create the QP
from the driver channel and modify the QP initial attributes before continuing
with create_qp().
Downstream patches from this series will add support for both DCI and
DCT driver QPs.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Unconditional locks/list and ODP srcu initialization should be done in
the INIT stage. Remove those from the CAPS stage and move them to the
proper stage.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The loopback stage only initializes a lock, move it to be in
the CAPS initialization phase and get rid loopback step completely.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Today we have single function which is used when we add an IB interface,
break this function into multiple functions.
Create stages and a generic mechanism to execute each stage.
This is in preparation for RDMA/IB representors which might not need
all stages or will do things differently in some of the stages.
This patch doesn't change any functionality.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch enables QP creation with a given BF index, this allows the
user space driver to share same BF between few QPs or alternatively have
a dedicated BF per QP.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch exposes the option to dynamic allocates a UAR, this
functionality will be used in downstream patch in this series as
part of QP creation.
Specifically, the user space driver asks for a UAR allocation in a given
page index, upon success this UAR and its bfregs can be used as part of
QP creation by the user space driver.
To enable allocating more than 256 UARs the page index is encoded in an
extra one byte just after the command byte.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch extends the alloc context flow to be prepared for working
with dynamic UAR allocations.
Currently upon alloc context there is some fix size of UARs that are
allocated (named 'static allocation') and there is no option to user
application to ask for more or control which UAR will be used by which
QP.
In this patch the driver prepares its data structures to manage both the
static and the dynamic allocations and let the user driver knows about
the max value of dynamic blue-flame registers that are allowed.
Downstream patches from this series will enable the dynamic allocation
and the association as part of QP creation.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
User-space applications can do mmap and munmap directly at
any time.
Since the VMA list is not protected with a mutex, concurrent
accesses to the VMA list from the mmap and munmap can cause
data corruption. Add a mutex around the list.
Cc: <stable@vger.kernel.org> # v4.7
Fixes: 7c2344c3bb ("IB/mlx5: Implements disassociate_ucontext API")
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add the PCI write end padding flag to device_cap_flags enum and set it
during mlx5_ib_query_device so it will be reported to user-space.
During WQ/QP creation, set that capability for WQ/QP if user requested
it and HW supports it.
PCI write end padding modification is not supported for now. There's no
such flag for a QP but for a WQ, create and modify use the same flag.
Return an error if PCI write end padding flag is set during modify_wq.
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The device can support receive Stateless Offloads for the inner
packet's fields only when the packet is processed by TIR which is
enabled to support tunneling. Otherwise, the device treats the
packet as an ordinary non-tunneling packet and receive offloads
can be done only for the outer packet's field.
In order to enable receive Stateless Offloading support for incoming
tunneling traffic the TIR should be created with tunneled_offload_en.
Tunneling offloads is supported only be raw ethernet QP.
This patch includes:
* New QP creation flag for tunneling offloads.
* Reports device capabilities.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In some benchmarks and some CPU architectures, writing the CQE on a full
cache line size improves performance by saving memory access operations
(read-modify-write) relative to partial cache line change. This patch
lets the user to configure the device to pad the CQE up to 128B in case
its content is less than 128B. Currently the driver supports only padding
for a CQE size of 128B.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Allow creation of a multi-packet receive queue.
In order to create a multi-packet RQ, the following fields in
the mlx5_ib_rwq should be set:
- log_num_strides: Log of number of strides per WQE
- single_stride_log_num_of_bytes: Log of a single stride size
- two_byte_shift_en: When enabled, hardware pads 2 bytes of zeros
before writing the message to memory (e.g. for the IP alignment).
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch reports the device's striding RQ capabilities to
the user-space:
- min/max_single_stride_log_num_of_bytes: Log of min/max number of
bytes in a single stride.
- min/max_single_wqe_log_num_of_strides: Log of min/max number of
strides in a single WQE.
- supported_qpts: A bit mask to know which QP types support multi-
packet RQ, for now only Raw Packet QPs.
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch is the first step in decoupling UMR usage and
allocation from the MR cache. The only functional change
in this patch is to enables UMR for MRs created with
reg_create.
This change fixes a bug where ODP memory regions that
were not allocated from the MR cache did not have UMR
enabled.
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Allow user space applications to accelerate send and receive
traffic which is typically handled by IPoIB ULP by creating
a UD QP with a given source QPN of the IPoIB UD QP.
UD QP with a given source QPN should basically be similar to
RAW QP from point of view of its created resources.
However,
- Its TIS should point to the source QPN.
- Modify can be done only on its state as the transport attributes
are managed by its source QP.
This patch manages below:
- Creating/destroying/modifying UD QP with a given source QPN.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add debugfs interface for monitor the number of delay drop timeout
events and the number of existing dropless RQs in the system.
In addition add debugfs interface for configuring the global timeout value
which is used in the SET_DELAY_DROP command.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
RQs that were configured for "delay drop" will prevent packet drops
when their WQEs are depleted.
Marking an RQ to be drop-less is done by setting delay_drop_en in RQ
context using CREATE_RQ command.
Since this feature is globally activated/deactivated by using the
SET_DELAY_DROP command on all the marked RQs, we activated/deactivated
it according to the number of RQs with 'delay_drop' enabled.
When timeout is expired, then the feature is deactivated. Therefore
the driver handles the delay drop timeout event and reactivate it.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds debug control parameters for congestion control which
can be read or written through debugfs. They are for reaction point and
notification point nodes.
These control parameters are as below:
+------------------------------+-----------------------------------------+
| Name | Description |
|------------------------------+-----------------------------------------|
|rp_clamp_tgt_rate | When set target rate is updated to |
| | current rate |
|------------------------------+-----------------------------------------|
|rp_clamp_tgt_rate_ati | When set update target rate based on |
| | timer as well |
|------------------------------+-----------------------------------------|
|rp_time_reset | time between rate increase if no |
| | CNP is received unit in usec |
|------------------------------+-----------------------------------------|
|rp_byte_reset | Number of bytes between rate inease if |
| | no CNP is received |
|------------------------------+-----------------------------------------|
|rp_threshold | Threshold for reaction point rate |
| | control |
|------------------------------+-----------------------------------------|
|rp_ai_rate | Rate for target rate, unit in Mbps |
|------------------------------+-----------------------------------------|
|rp_hai_rate | Rate for hyper increase state |
| | unit in Mbps |
|------------------------------+-----------------------------------------|
|rp_min_dec_fac | Minimum factor by which the current |
| | transmit rate can be changed when |
| | processing a CNP, unit is percerntage |
|------------------------------+-----------------------------------------|
|rp_min_rate | Minimum value for rate limit, |
| | unit in Mbps |
|------------------------------+-----------------------------------------|
|rp_rate_to_set_on_first_cnp | Rate that is set when first CNP is |
| | received, unit is Mbps |
|------------------------------+-----------------------------------------|
|rp_dce_tcp_g | Used to calculate alpha |
|------------------------------+-----------------------------------------|
|rp_dce_tcp_rtt | Time between updates of alpha value, |
| | unit is usec |
|------------------------------+-----------------------------------------|
|rp_rate_reduce_monitor_period | Minimum time between consecutive rate |
| | reductions |
|------------------------------+-----------------------------------------|
|rp_initial_alpha_value | Initial value of alpha |
|------------------------------+-----------------------------------------|
|rp_gd | When CNP is received, flow rate is |
| | reduced based on gd, rp_gd is given as |
| | log2(rp_gd) |
|------------------------------+-----------------------------------------|
|np_cnp_dscp | dscp code point for generated cnp |
|------------------------------+-----------------------------------------|
|np_cnp_prio_mode | 802.1p priority for generated cnp |
|------------------------------+-----------------------------------------|
|np_cnp_prio | cnp priority mode |
+------------------------------+-----------------------------------------+
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The old logic ignored link state. This led to missing IB events like
when link goes down on the switch while admin state is up or to redundant
events like when admin state goes up while link is down.
To fix that, probe the port state on NETDEV events and compare to last
known state to decide if IB events needs to be dispatched.
FIxes: 5ec8c83e3a ("IB/mlx5: Port events in RoCE now rely on netdev events")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently, unicast/multicast loopback raw ethernet
(non-RDMA) packets are sent back to the vport.
A unicast loopback packet is the packet with destination
MAC address the same as the source MAC address.
For multicast, the destination MAC address is in the
vport's multicast filter list.
Moreover, the local loopback is not needed if
there is one or none user space context.
After this patch, the raw ethernet unicast and multicast
local loopback are disabled by default. When there is more
than one user space context, the local loopback is enabled.
Note that when local loopback is disabled, raw ethernet
packets are not looped back to the vport and are forwarded
to the next routing level (eswitch, or multihost switch,
or out to the wire depending on the configuration).
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cache the needed umr_fence and set the wqe ctrl segmennt
accordingly.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch simply renames struct ib_ah_attr to
rdma_ah_attr as these fields specify attributes that are
not necessarily specific to IB.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Internally MW implemented as KLM MKey and filled by userspace UMR
postsends. Handle pagefault trigered by operations on this MKeys.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds support to query the congestion related hardware counters
through new command and links them with other hw counters being available
in hw_counters sysfs location.
In order to reuse existing infrastructure it renames related q_counter
data structures to more generic counters to reflect q_counters and
congestion counters and maybe some other counters in the future.
New hardware counters:
* rp_cnp_handled - CNP packets handled by the reaction point
* rp_cnp_ignored - CNP packets ignored by the reaction point
* np_cnp_sent - CNP packets sent by notification point to respond to
CE marked RoCE packets
* np_ecn_marked_roce_packets - CE marked RoCE packets received by
notification point
It also avoids returning ENOSYS which is specific for invalid
system call and produces the following checkpatch.pl warning.
WARNING: ENOSYS means 'invalid syscall nr' and nothing else
+ return -ENOSYS;
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Implement mlx5e's IPoIB SKB transmit using the helper functions provided
by mlx5e ethernet tx flow, the only difference in the code between
mlx5e_xmit and mlx5i_xmit is that IPoIB has some extra fields to fill
(UD datagram segment) in the TX descriptor (WQE) and it doesn't need to
have any vlan handling.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add implicit MR, covering entire user address space.
The MR is implemented as an indirect KSM MR consisting of
1GB direct MRs.
Pages and direct MRs are added/removed to MR by ODP.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Allow other parts of mlx5_ib to use MR cache mechanism.
* Add new functions mlx5_mr_cache_alloc and mlx5_mr_cache_free
* Traditional MTT MKey buckets are limited by MAX_UMR_CACHE_ENTRY
Additinal buckets may be added above.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Enable creating a RAW Ethernet QP with cvlan stripping offload when
it's supported by the hardware.
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch modify the Q counters implementation, so each one of the
three Q counters groups will be exposed by the driver only if they are
supported by the firmware.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For Routable RoCE QPs, the DSCP should be set in the QP's
address path.
The DSCP's value is derived from the traffic class.
Fixes: 2811ba51b0 ("IB/mlx5: Add RoCE fields to Address Vector")
Cc: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Current check requests that new fields in struct
mlx5_ib_alloc_ucontext_req_v2 that are not known to the driver be zero.
This was introduced so new libraries passing additional information to
the kernel through struct mlx5_ib_alloc_ucontext_req_v2 will be notified
by old kernels that do not support their request by failing the
operation. This schecme is problematic since it requires libmlx5 to issue
the requests with descending input size for struct
mlx5_ib_alloc_ucontext_req_v2.
To avoid this, we require that new features that will obey the following
rules:
If the feature requires one or more fields in the response and the at
least one of the fields can be encoded such that a zero value means the
kernel ignored the request then this field will provide the indication
to the library. If no response is required or if zero is a valid
response, a new field should be added that indicates to the library
whether its request was processed.
Fixes: b368d7cb8c ('IB/mlx5: Add hca_core_clock_offset to udata in init_ucontext')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Make use of the blue flame registers allocator at mlx5_ib. Since blue
flame was not really supported we remove all the code that is related to
blue flame and we let all consumers to use the same blue flame register.
Once blue flame is supported we will add the code. As part of this patch
we also move the definition of struct mlx5_bf to mlx5_ib.h as it is only
used by mlx5_ib.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This establishes a solid naming conventions for UARs. A UAR (User Access
Region) can have size identical to a system page or can be fixed 4KB
depending on a value queried by firmware. Each UAR always has 4 blue
flame register which are used to post doorbell to send queue. In
addition, a UAR has section used for posting doorbells to CQs or EQs. In
this patch we change names to reflect this conventions.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* Update page fault event according to last specification.
* Separate code path for page fault EQ, completion EQ and async EQ.
* Move page fault handling work queue from mlx5_ib static variable
into mlx5_core page fault EQ.
* Allocate memory to store ODP event dynamically as the
events arrive, since in atomic context - use mempool.
* Make mlx5_ib page fault handler run in process context.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In this change we turn mlx5_ib_update_mtt() into generic
mlx5_ib_update_xlt() to perfrom HCA translation table modifiactions
supporting both atomic and process contexts and not limited by number
of modified entries.
Using this function we increase preallocated MRs up to 16GB.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make use of extended UMR translation offset.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Update struct mlx5_wqe_umr_ctrl_seg.
* Currenlty UMR send_flags aim only certain use cases: enabled/disable
cached MR, modifying XLT for ODP. By making flags independent make UMR
more flexible allowing arbitrary manipulations.
* Since different UMR formats have different entry sizes UMR request
should receive exact size of translation table update instead of
number of entries. Rename field npages to xlt_size in struct mlx5_umr_wr
and update relevant code accordingly.
* Add support of length64 bit.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Shared mlx5 updates with net stack (will drop out on merge if Dave's
tree has already been merged)
- Driver updates: cxgb4, hfi1, hns-roce, i40iw, mlx4, mlx5, qedr, rxe
- Debug cleanups
- New connection rejection helpers
- SRP updates
- Various misc fixes
- New paravirt driver from vmware
-----BEGIN PGP SIGNATURE-----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=QeGy
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"This is the complete update for the rdma stack for this release cycle.
Most of it is typical driver and core updates, but there is the
entirely new VMWare pvrdma driver. You may have noticed that there
were changes in DaveM's pull request to the bnxt Ethernet driver to
support a RoCE RDMA driver. The bnxt_re driver was tentatively set to
be pulled in this release cycle, but it simply wasn't ready in time
and was dropped (a few review comments still to address, and some
multi-arch build issues like prefetch() not working across all
arches).
Summary:
- shared mlx5 updates with net stack (will drop out on merge if
Dave's tree has already been merged)
- driver updates: cxgb4, hfi1, hns-roce, i40iw, mlx4, mlx5, qedr, rxe
- debug cleanups
- new connection rejection helpers
- SRP updates
- various misc fixes
- new paravirt driver from vmware"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (210 commits)
IB: Add vmw_pvrdma driver
IB/mlx4: fix improper return value
IB/ocrdma: fix bad initialization
infiniband: nes: return value of skb_linearize should be handled
MAINTAINERS: Update Intel RDMA RNIC driver maintainers
MAINTAINERS: Remove Mitesh Ahuja from emulex maintainers
IB/core: fix unmap_sg argument
qede: fix general protection fault may occur on probe
IB/mthca: Replace pci_pool_alloc by pci_pool_zalloc
mlx5, calc_sq_size(): Make a debug message more informative
mlx5: Remove a set-but-not-used variable
mlx5: Use { } instead of { 0 } to init struct
IB/srp: Make writing the add_target sysfs attr interruptible
IB/srp: Make mapping failures easier to debug
IB/srp: Make login failures easier to debug
IB/srp: Introduce a local variable in srp_add_one()
IB/srp: Fix CONFIG_DYNAMIC_DEBUG=n build
IB/multicast: Check ib_find_pkey() return value
IPoIB: Avoid reading an uninitialized member variable
IB/mad: Fix an array index check
...
- Add MODIFY_QP_EX CMD to extend modify_qp.
- Rate limit will be updated in the following state transactions: RTR2RTS,
RTS2RTS. The limit will be removed when SQ is in RST and ERR state.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The fast_registration length is used to convey length for memory
registrations through UMR which can be of any size up to 2^64.
Change the length type to be u64.
Fixes: 968e78dd96 ('IB/mlx5: Enhance UMR support to allow partial page table update')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add struct ib_udata to the signature of create_ah callback that is
implemented by IB device drivers. This allows HW drivers to return extra
data to the userspace library.
This patch prepares the ground for mlx5 driver to resolve destination
mac address for a given GID and return it to userspace.
This patch was previously submitted by Knut Omang as a part of the
patch set to support Oracle's Infiniband HCA (SIF).
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
All conflicts were simple overlapping changes except perhaps
for the Thunder driver.
That driver has a change_mtu method explicitly for sending
a message to the hardware. If that fails it returns an
error.
Normally a driver doesn't need an ndo_change_mtu method becuase those
are usually just range changes, which are now handled generically.
But since this extra operation is needed in the Thunder driver, it has
to stay.
However, if the message send fails we have to restore the original
MTU before the change because the entire call chain expects that if
an error is thrown by ndo_change_mtu then the MTU did not change.
Therefore code is added to nicvf_change_mtu to remember the original
MTU, and to restore it upon nicvf_update_hw_max_frs() failue.
Signed-off-by: David S. Miller <davem@davemloft.net>
The maximum page size in the mkey context is 2GB.
Until today, we didn't enforce this requirement in the code,
and therefore, if we got a page size larger than 2GB, we
have passed zeros in the log_page_shift instead of the actual value
and the registration failed.
This patch limits the driver to use compound pages of 2GB for mkeys.
Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When calling reg_mr of large MRs (e.g. 4GB) from multiple processes
and MR caches can't supply the required amount of MRs the slow-path
of MR allocation may be used. In this case we need to serialize the
slow-path between the processes to avoid soft lock.
Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently when calling mlx5_add_flow_rule we accept
only one flow destination, this commit allows to pass
multiple destinations.
This change forces us to change the return structure to a more
flexible one. We introduce a flow handle (struct mlx5_flow_handle),
it holds internally the number for rules created and holds an array
where each cell points the to a flow rule.
From the consumers (of mlx5_add_flow_rule) point of view this
change is only cosmetic and requires only to change the type
of the returned value they store.
From the core point of view, we now need to use a loop when
allocating and deleting rules (e.g given to us a flow handler).
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
- Updates to mlx5
- Updates to mlx4 (two conflicts, both minor and easily resolved)
- Updates to iw_cxgb4 (one conflict, not so obvious to resolve, proper
resolution is to keep the code in cxgb4_main.c as it is in Linus'
tree as attach_uld was refactored and moved into cxgb4_uld.c)
- Improvements to uAPI (moved vendor specific API elements to uAPI area)
- Add hns-roce driver and hns and hns-roce ACPI reset support
- Conversion of all rdma code away from deprecated
create_singlethread_workqueue
- Security improvement: remove unsafe ib_get_dma_mr (breaks lustre in
staging)
-----BEGIN PGP SIGNATURE-----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=LC+S
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull main rdma updates from Doug Ledford:
"This is the main pull request for the rdma stack this release. The
code has been through 0day and I had it tagged for linux-next testing
for a couple days.
Summary:
- updates to mlx5
- updates to mlx4 (two conflicts, both minor and easily resolved)
- updates to iw_cxgb4 (one conflict, not so obvious to resolve,
proper resolution is to keep the code in cxgb4_main.c as it is in
Linus' tree as attach_uld was refactored and moved into
cxgb4_uld.c)
- improvements to uAPI (moved vendor specific API elements to uAPI
area)
- add hns-roce driver and hns and hns-roce ACPI reset support
- conversion of all rdma code away from deprecated
create_singlethread_workqueue
- security improvement: remove unsafe ib_get_dma_mr (breaks lustre in
staging)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (75 commits)
staging/lustre: Disable InfiniBand support
iw_cxgb4: add fast-path for small REG_MR operations
cxgb4: advertise support for FR_NSMR_TPTE_WR
IB/core: correctly handle rdma_rw_init_mrs() failure
IB/srp: Fix infinite loop when FMR sg[0].offset != 0
IB/srp: Remove an unused argument
IB/core: Improve ib_map_mr_sg() documentation
IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets
IB/mthca: Move user vendor structures
IB/nes: Move user vendor structures
IB/ocrdma: Move user vendor structures
IB/mlx4: Move user vendor structures
IB/cxgb4: Move user vendor structures
IB/cxgb3: Move user vendor structures
IB/mlx5: Move and decouple user vendor structures
IB/{core,hw}: Add constant for node_desc
ipoib: Make ipoib_warn ratelimited
IB/mlx4/alias_GUID: Remove deprecated create_singlethread_workqueue
IB/ipoib_verbs: Remove deprecated create_singlethread_workqueue
IB/ipoib: Remove deprecated create_singlethread_workqueue
...
This patch decouples and moves vendors specific structures to
common UAPI folder which will be visible to all consumers.
These structures are used by user-space library driver
(libmlx5) and currently manually copied to that library.
This move will allow cross-compile against these files and
simplify introduction of vendor specific data.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When LAG is active, QP tx affinity (the physical port
to which a QP is affined, or the TIS in case of raw-eth)
is set in a round robin fashion during state transition
from RESET to INIT.
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This is done in two steps:
1) Issuing CREATE_VPORT_LAG in order to have Ethernet traffic from
both ports arriving on PF0 root flowtable, so we will be able to catch
all raw-eth traffic on PF0.
2) Creation of LAG demux flowtable in order to direct all non-raw-eth
traffic back to its source port, assuring that normal Ethernet
traffic "jumps" to the root flowtable of its RX port (non-LAG behavior).
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Track asynchronous events on a receive work queue by using the
mlx5_core_create_rq_tracked API.
In case a fatal error has occurred letting the IB layer know about by
using the ib_wq event handler.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support to create sniffer rule. This rule receive all
incoming and outgoing packets from the port.
A user could create such rule by using IB_FLOW_ATTR_SNIFFER type.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Saving the flow table priority object's pointer in the flow handle
is necessary for downstream patches since the sniffer flow table isn't
placed at the standard flow_db structure but in a different database.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Conflicts:
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/qlogic/qed/qed_dcbx.c
drivers/net/phy/Kconfig
All conflicts were cases of overlapping commits.
Signed-off-by: David S. Miller <davem@davemloft.net>
Use TIR number based on selector, it should be done to differentiate
between RSS QP to RAW one.
Reported-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Tested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove old representation of manually created MKey/PSV commands layout,
and use mlx5_ifc canonical structures and defines.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In order to support statistics for ports, we attach
each QP to a counter set which is dedicate to this port.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The driver exposes interfaces that directly relate to HW state.
Upon fatal error, consumers of these interfaces (ULPs) that rely
on completion of all their posted work-request could hang, thereby
introducing dependencies in shutdown order. To prevent this from
happening, we manage the relevant resources (CQs, QPs) that are used
by the device. Upon a fatal error, we now generate simulated
completions for outstanding WQEs that were not completed at the
time the HW was reset.
It includes invoking the completion event handler for all involved
CQs so that the ULPs will poll those CQs. When polled we return
simulated CQEs with IB_WC_WR_FLUSH_ERR return code enabling ULPs
to clean up their resources and not wait forever for completions
upon receiving remove_one.
The above change requires an extra check in the data path to make
sure that when device is in error state, the simulated CQEs will
be returned and no further WQEs will be posted.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Implements the IB core disassociate_ucontext API.
The driver detaches the HW resources for a given user context to
prevent a dependency between application termination and device
disconnect. This is done by managing the VMAs that were mapped
to the HW bars such as doorbell and blueflame. When need to detach,
remap them to an arbitrary kernel page returned by the zap API.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support for Raw Ethernet RX HASH QP. Currently, creation and
destruction of such a QP are supported. This QP is implemented as
a simple TIR object which points to the receive RQ indirection table.
The given hashing configuration is used to configure the TIR and by
that it chooses the right RQ from the RQ indirection table.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some mlx5 based hardwares support a RQ table object. This RQ table
points to a few RQ objects. We implement the receive work queue
indirection table API (create and destroy) by using this hardware
object.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A QP can be created without internal WQs "packaged" inside it,
this QP can be configured to use "external" WQ object as its
receive/send queue.
WQ is a necessary component for RSS technology since RSS mechanism
is supposed to distribute the traffic between multiple
Receive Work Queues
Receive WQs are implemented by RQs.
Implement the WQ creation, modification and destruction verbs.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Enable Scatter FCS in the RQ context when the user passes
Scatter FCS create flag.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
By this patch, the user space library will be able to improve
performance using appropriate ringing DoorBell method according to the
memory type it asked for.
Currently only one mapping command is allowed for UARs:
MLX5_IB_MMAP_REGULAR_PAGE. Using this mapping, the kernel maps the
UARs to write-combining (WC) if the system supports it.
If the system is not supporting WC the UARs are mapped to
non-cached(NC). In this case the user space library can't tell which
mapping is applied.
This patch adds 2 new mapping commands: MLX5_IB_MMAP_WC_PAGE and
MLX5_IB_MMAP_NC_PAGE. For these commands the kernel maps exactly as
requested and fails if it can't.
Since there is no generic way to check if the requested memory region
can be mapped as WC, driver enables conclusive WC mapping only for
x86, PowerPC and ARM which support WC for the device's memory region.
Signed-off-by: Guy Levy <guyle@mellanox.com>
Signed-off-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The SRP initiator allows to set max_sectors to a value that exceeds
the largest amount of data that can be mapped at once with an mlx4
HCA using fast registration and a page size of 4 KB. Hence modify
ib_map_mr_sg() such that it can map partial sg-elements. If an
sg-element has been mapped partially, let the caller know
which fraction has been mapped by adjusting *sg_offset.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The previous patch that added a couple of callback functions put
the declarations inside of an #ifdef CONFIG_INFINIBAND_ON_DEMAND_PAGING,
which causes the build to fail if that option is disabled:
drivers/infiniband/hw/mlx5/main.c: In function 'mlx5_ib_add':
drivers/infiniband/hw/mlx5/main.c:2358:31: error: 'mlx5_ib_get_vf_config' undeclared (first use in this function)
This moves the four declarations below the #ifdef section so they
are always available.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: eff901d30e ("IB/mlx5: Implement callbacks for manipulating VFs")
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Implement the IB defined callbacks used to manipulate the policy for the
link state, set GUIDs or get statistics information. This functionality
is added into a new file that will be used to add any SRIOV related
functionality to the mlx5 IB layer.
The following callbacks have been added:
mlx5_ib_get_vf_config
mlx5_ib_set_vf_link_state
mlx5_ib_get_vf_stats
mlx5_ib_set_vf_guid
In addition, publish whether this device is based on a virtual function.
In mlx5 supported devices, virtual functions are implemented as vHCAs.
vHCAs have their own QP number space so it is possible that two vHCAs
will use a QP with the same number at the same time.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Each bypass flow steering priority will be split into two priorities:
1. Priority for don't trap rules.
2. Priority for normal rules.
When user creates a flow using IB_FLOW_ATTR_FLAGS_DONT_TRAP flag, the
driver creates two flow rules, one used for receiving the traffic and
the other one for forwarding the packet to continue matching in lower
or equal priorities.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Allocate proper context for arbitrary scatterlist registration
If ib_alloc_mr is called with IB_MR_MAP_ARB_SG, the driver
allocate a private klm list instead of a private page list.
Set the UMR wqe correctly when posting the fast registration.
Also, expose device cap IB_DEVICE_MAP_ARB_SG according to the
device id (until we have a FW bit that correctly exposes it).
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Simplifies the code, and makes it more fair vs other users by using a
softirq for polling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds user-space support for memory windows allocation and
deallocation. It also exposes the supported types via
query_device_caps verb.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Tested-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Mlx5's mkey mechanism is also used for memory windows.
The current code base uses MR (memory region) naming, which is
inaccurate. Changing MR to mkey in order to represent its different
usages more accurately.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds support for re-registration of memory regions in MLX5.
The functionality is basically the same as deregister followed by
register, but attempts to reuse the existing resources as much as
possible.
Original memory keys are kept if possible, saving the need to
communicate new ones to remote peers.
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The GSI QP emulation requires also emulating completions for transmitted
MADs. The CQ on which these completions are generated can also be used by
the hardware, and the MAD layer is free to use any CQ of the device for the
GSI QP.
Add a method for generating software completions to each mlx5 CQ. Software
completions are polled first, and generate calls to the completion handler
callback if necessary.
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Whenever the P_Key table is changed, we create the required GSI
transmission QPs on-demand.
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
mlx5 creates special GSI QPs that has limited ability to control the P_Key
of transmitted packets. The sent P_Key is taken from the QP object,
similarly to what happens with regular UD QPs.
Create a software wrapper around GSI QPs that with the following patches
will be able to emulate the functionality of a GSI QP including control of
the P_Key per work request.
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to create multiple GSI QPs, we need to set the source QP number to
one on all these QPs. Add the necessary definitions and infrastructure to
do that.
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to support LSO and CSUM in the TX flow the driver does the
following:
* LSO bit for the enum mlx5_ib_qp_flags was added, indicates QP that
supports LSO offloads.
* Enables the special offload when the QP is created, and enable the
special work request id (IB_WR_LSO) when comes.
* Calculates the size of the WQE according to the new WQE format that
support these offloads.
* Handles the new WQE format when arrived, sets the relevant
fields, and copies the needed data.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- Remove usage of ib_query_device and instead store attributes in
ib_device struct
- Move iopoll out of block and into lib, rename to irqpoll, and use
in several places in the rdma stack as our new completion queue
polling library mechanism. Update the other block drivers that
already used iopoll to use the new mechanism too.
- Replace the per-entry GID table locks with a single GID table lock
- IPoIB multicast cleanup
- Cleanups to the IB MR facility
- Add support for 64bit extended IB counters
- Fix for netlink oops while parsing RDMA nl messages
- RoCEv2 support for the core IB code
- mlx4 RoCEv2 support
- mlx5 RoCEv2 support
- Cross Channel support for mlx5
- Timestamp support for mlx5
- Atomic support for mlx5
- Raw QP support for mlx5
- MAINTAINERS update for mlx4/mlx5
- Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates
- Add support for remote invalidate to the iSER driver (pushed through the
RDMA tree due to dependencies, acknowledged by nab)
- Update to NFSoRDMA (pushed through the RDMA tree due to dependencies,
acknowledged by Bruce)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5oO7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"Initial roundup of 4.5 merge window patches
- Remove usage of ib_query_device and instead store attributes in
ib_device struct
- Move iopoll out of block and into lib, rename to irqpoll, and use
in several places in the rdma stack as our new completion queue
polling library mechanism. Update the other block drivers that
already used iopoll to use the new mechanism too.
- Replace the per-entry GID table locks with a single GID table lock
- IPoIB multicast cleanup
- Cleanups to the IB MR facility
- Add support for 64bit extended IB counters
- Fix for netlink oops while parsing RDMA nl messages
- RoCEv2 support for the core IB code
- mlx4 RoCEv2 support
- mlx5 RoCEv2 support
- Cross Channel support for mlx5
- Timestamp support for mlx5
- Atomic support for mlx5
- Raw QP support for mlx5
- MAINTAINERS update for mlx4/mlx5
- Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates
- Add support for remote invalidate to the iSER driver (pushed
through the RDMA tree due to dependencies, acknowledged by nab)
- Update to NFSoRDMA (pushed through the RDMA tree due to
dependencies, acknowledged by Bruce)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (169 commits)
IB/mlx5: Unify CQ create flags check
IB/mlx5: Expose Raw Packet QP to user space consumers
{IB, net}/mlx5: Move the modify QP operation table to mlx5_ib
IB/mlx5: Support setting Ethernet priority for Raw Packet QPs
IB/mlx5: Add Raw Packet QP query functionality
IB/mlx5: Add create and destroy functionality for Raw Packet QP
IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types
IB/mlx5: Allocate a Transport Domain for each ucontext
net/mlx5_core: Warn on unsupported events of QP/RQ/SQ
net/mlx5_core: Add RQ and SQ event handling
net/mlx5_core: Export transport objects
IB/mlx5: Expose CQE version to user-space
IB/mlx5: Add CQE version 1 support to user QPs and SRQs
IB/mlx5: Fix data validation in mlx5_ib_alloc_ucontext
IB/sa: Fix netlink local service GFP crash
IB/srpt: Remove redundant wc array
IB/qib: Improve ipoib UD performance
IB/mlx4: Advertise RoCE v2 support
IB/mlx4: Create and use another QP1 for RoCEv2
IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers
...
The create_cq() can receive creation flags which were used
differently by two commits which added create_cq extended
command and cross-channel. The merged code caused to not
accept any flags at all.
This patch unifies the check into one function and one return
error code.
Fixes: 972ecb8213 ("IB/mlx5: Add create_cq extended command")
Fixes: 051f263098 ("IB/mlx5: Add driver cross-channel support")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds support for Raw Packet QP for the mlx5 device.
Raw Packet QP, unlike other QP types, has no matching mlx5_core_qp
object but rather it is built of RQ/SQ/TIR/TIS/TD mlx5_core object.
Since the SQ and RQ work-queue (WQ) buffers are not contiguous like
other QPs, we allocate separate buffers in the user-space and pass
the address of each one of them separately to the kernel.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Extract specific IB QP fields to mlx5_ib_qp_trans structure.
The mlx5_core QP object resides in mlx5_ib_qp_base, which all QP types
inherit from. When we need to find mlx5_ib_qp using mlx5_core QP
(event handling and co), we use a pointer that resides in
mlx5_ib_qp_base.
In addition, we delete all redundant fields that weren't used anywhere
in the code:
-doorbell_qpn
-sq_max_wqes_per_wr
-sq_spare_wqes
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Transport Domain groups several TIS and TIR object. By grouping
these object, it defines wheather local loopback packets that
are sent from the TIS objects in the group are received by the
TIR objects in the same group.
Allocate a Transport Domain(TD) for each user context to be used
in the future by Raw Packet QP for Self-Loopback Control.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Enforce working with CQE version 1 when the user supports CQE
version 1 and asked to work this way.
If the user still works with CQE version 0, then use the default
CQE version to tell the Firmware that the user still works in the
older mode.
After this patch, the kernel still reports CQE version 0.
Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adding flow steering support by creating a flow-table per
priority (if rules exist in the priority). mlx5_ib uses
autogrouping and thus only creates the required destinations.
Also includes adding of these flow steering utilities
1. Parsing verbs flow attributes hardware steering specs.
2. Check if flow is multicast - this is required in order to decide
to which flow table will we add the steering rule.
3. Set outer headers in flow match criteria to zeros.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support of cross-channel functionality to mlx5
driver. This includes ability to ignore overrun for CQ
which intended for cross-channel, export device capability and
configure the QP to be sync master/slave queues.
The cross-channel enabled QP supports combination of
three possible properties:
* WQE processing on the receive queue of this QP
* WQE processing on the send queue of this QP
* WQE are supported on the send queue
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to read the HCA's current cycles register, we need
to map it to user-space. Add support to map this register
via mmap command.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pass hca_core_clock_offset to user-space is mandatory in order to
let the user-space read the free-running clock register from the
right offset in the memory mapped page.
Passing this value is done by changing the vendor's command
and response of init_ucontext to be in extensible form.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Set the address handle and QP address path fields according to the
link layer type (IB/Eth).
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For Eth ports only:
Maintain a net device pointer in mlx5_ib_device and update it
upon NETDEV_REGISTER and NETDEV_UNREGISTER events if the
net-device and IB device have the same PCI parent device.
Implement the get_netdev callback to return this net device.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
No ULP uses it anymore, go ahead and remove it.
Keep only the local invalidate part of the handlers.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Support the new memory registration API by allocating a
private page list array in mlx5_ib_mr and populate it when
mlx5_ib_map_mr_sg is invoked. Also, support IB_WR_REG_MR
by setting the exact WQE as IB_WR_FAST_REG_MR, just take the
needed information from different places:
- page_size, iova, length, access flags (ib_mr)
- page array (mlx5_ib_mr)
- key (ib_reg_wr)
The IB_WR_FAST_REG_MR handlers will be removed later when
all the ULPs will be converted.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Just function declarations - no need for those
laying arround. If for some reason someone will want
FMR support in mlx5, it should be easy enough to restore
a few structs.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch split up struct ib_send_wr so that all non-trivial verbs
use their own structure which embedds struct ib_send_wr. This dramaticly
shrinks the size of a WR for most common operations:
sizeof(struct ib_send_wr) (old): 96
sizeof(struct ib_send_wr): 48
sizeof(struct ib_rdma_wr): 64
sizeof(struct ib_atomic_wr): 96
sizeof(struct ib_ud_wr): 88
sizeof(struct ib_fast_reg_wr): 88
sizeof(struct ib_bind_mw_wr): 96
sizeof(struct ib_sig_handover_wr): 80
And with Sagi's pending MR rework the fast registration WR will also be
down to a reasonable size:
sizeof(struct ib_fastreg_wr): 64
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> [srp, srpt]
Reviewed-by: Chuck Lever <chuck.lever@oracle.com> [sunrpc]
Tested-by: Haggai Eran <haggaie@mellanox.com>
Tested-by: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Since mlx5 driver cannot rely on registration using the
reserved lkey (global_dma_lkey) it used to allocate a private
physical address lkey for each allocated pd.
Commit 96249d70dd ("IB/core: Guarantee that a local_dma_lkey
is available") just does it in the core layer so we can go ahead
and use that.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since patch series "Demux IB CM requests in the rdma_cm module" the
P_Key index is taken from the work completion rather than the message
itself.
The HCA provides us with the message P_Key. In order to provide the
P_Key index, we need to look it up. Given that this is relevant only
for GSI messages (session establishments) which is less performance critical,
micro-optimize against the GSI (is_qp1) branch.
Fixes: 4c21b5bcef ("IB/cma: Add net_dev and private data checks to
RDMA CM")
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The pd now has a local_dma_lkey member which completely replaces
ib_get_dma_mr, use it instead.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use ib_alloc_mr with specific parameters.
Change the existing callers.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This was added in a thought of uniting all mr allocation
and deallocation routines but the fact is we have a single
deallocation routine already, ib_dereg_mr.
And, move mlx5_ib_destroy_mr specific logic into mlx5_ib_dereg_mr
(includes only signature stuff for now).
And, fixup the only callers (iser/isert) accordingly.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pull networking updates from David Miller:
1) Add TX fast path in mac80211, from Johannes Berg.
2) Add TSO/GRO support to ibmveth, from Thomas Falcon
3) Move away from cached routes in ipv6, just like ipv4, from Martin
KaFai Lau.
4) Lots of new rhashtable tests, from Thomas Graf.
5) Run ingress qdisc lockless, from Alexei Starovoitov.
6) Allow servers to fetch TCP packet headers for SYN packets of new
connections, for fingerprinting. From Eric Dumazet.
7) Add mode parameter to pktgen, for testing receive. From Alexei
Starovoitov.
8) Cache access optimizations via simplifications of build_skb(), from
Alexander Duyck.
9) Move page frag allocator under mm/, also from Alexander.
10) Add xmit_more support to hv_netvsc, from KY Srinivasan.
11) Add a counter guard in case we try to perform endless reclassify
loops in the packet scheduler.
12) Extern flow dissector to be programmable and use it in new "Flower"
classifier. From Jiri Pirko.
13) AF_PACKET fanout rollover fixes, performance improvements, and new
statistics. From Willem de Bruijn.
14) Add netdev driver for GENEVE tunnels, from John W Linville.
15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso.
16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet.
17) Add an ECN retry fallback for the initial TCP handshake, from Daniel
Borkmann.
18) Add tail call support to BPF, from Alexei Starovoitov.
19) Add several pktgen helper scripts, from Jesper Dangaard Brouer.
20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa.
21) Favor even port numbers for allocation to connect() requests, and
odd port numbers for bind(0), in an effort to help avoid
ip_local_port_range exhaustion. From Eric Dumazet.
22) Add Cavium ThunderX driver, from Sunil Goutham.
23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata,
from Alexei Starovoitov.
24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai.
25) Double TCP Small Queues default to 256K to accomodate situations
like the XEN driver and wireless aggregation. From Wei Liu.
26) Add more entropy inputs to flow dissector, from Tom Herbert.
27) Add CDG congestion control algorithm to TCP, from Kenneth Klette
Jonassen.
28) Convert ipset over to RCU locking, from Jozsef Kadlecsik.
29) Track and act upon link status of ipv4 route nexthops, from Andy
Gospodarek.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits)
bridge: vlan: flush the dynamically learned entries on port vlan delete
bridge: multicast: add a comment to br_port_state_selection about blocking state
net: inet_diag: export IPV6_V6ONLY sockopt
stmmac: troubleshoot unexpected bits in des0 & des1
net: ipv4 sysctl option to ignore routes when nexthop link is down
net: track link-status of ipv4 nexthops
net: switchdev: ignore unsupported bridge flags
net: Cavium: Fix MAC address setting in shutdown state
drivers: net: xgene: fix for ACPI support without ACPI
ip: report the original address of ICMP messages
net/mlx5e: Prefetch skb data on RX
net/mlx5e: Pop cq outside mlx5e_get_cqe
net/mlx5e: Remove mlx5e_cq.sqrq back-pointer
net/mlx5e: Remove extra spaces
net/mlx5e: Avoid TX CQE generation if more xmit packets expected
net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion
net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq()
net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them
net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues
net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device
...
In order to support alternate sized MADs (and variable sized MADs on OPA
devices) add in/out MAD size parameters to the process_mad core call.
In addition, add an out_mad_pkey_index to communicate the pkey index the driver
wishes the MAD stack to use when sending OPA MAD responses.
The out MAD size and the out MAD PKey index are required by the MAD
stack to generate responses on OPA devices.
Furthermore, the in and out MAD parameters are made generic by specifying them
as ib_mad_hdr rather than ib_mad.
Drivers are modified as needed and are protected by BUG_ON flags if the MAD
sizes passed to them is incorrect.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add a new ib_cq_init_attr structure which contains the
previous cqe (minimum number of CQ entries) and comp_vector
(completion vector) in addition to a new flags field.
All vendors' create_cq callbacks are changed in order
to work with the new API.
This commit does not change any functionality.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com> to patch #2
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ethernet functionality is only available when working in ISSI > 0 mode.
Previously, the IB driver wasn't ready to work on that mode, and hence
building both the IB driver and the Ethernet functionality in the core
driver were disallowed by Kconfigs.
Now, once we have all the pre-steps in place, we can remove this limitation.
The last steps in the IB driver for getting that setup to work are:
create dummy SRQ for the driver's use (until now we could use XRC_SRQ
as SRQ and XRC_SRQ, after moving to ISSI > 0, we separate XRC SRQs from
basic SRQs) and adapt the create QP function to be compatible with ISSI > 0.
Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ISSI > 0 mode, most of the MAD_IFC command features are deprecated, and can't
be used. Therefore, when in that mode, we replace all of them with other commands
that provide the required functionality.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The process_mad device function declares some parameters as "in". Make those
parameters const and adjust the call tree under process_mad in the various
drivers accordingly.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- Query all supported types of dev caps on driver load.
- Store the Cap data outbox per cap type into driver private data.
- Introduce new Macros to access/dump stored caps (using the auto
generated data types).
- Obsolete SW representation of dev caps (no need for SW copy for each
cap).
- Modify IB driver to use new macros for checking caps.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Preparation for ethernet driver.
These functions will be used in drivers other than mlx5_ib.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Implement the relevant invalidation functions (zap MTTs as needed)
* Implement interlocking (and rollback in the page fault handlers) for
cases of a racing notifier and fault.
* With this patch we can now enable the capability bits for supporting RC
send/receive/RDMA read/RDMA write, and UD send.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Shachar Raindel <raindel@mellanox.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
* Refactor MR registration and cleanup, and fix reg_pages accounting.
* Create a work queue to handle page fault events in a kthread context.
* Register a fault handler to get events from the core for each QP.
The registered fault handler is empty in this patch, and only a later
patch implements it.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Shachar Raindel <raindel@mellanox.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The new function allows updating the page tables of a memory region
after it was created. This can be used to handle page faults and page
invalidations.
Since mlx5_ib_update_mtt will need to work from within page invalidation,
so it must not block on memory allocation. It employs an atomic memory
allocation mechanism that is used as a fallback when kmalloc(GFP_ATOMIC) fails.
In order to reuse code from mlx5_ib_populate_pas, the patch splits
this function and add the needed parameters.
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Shachar Raindel <raindel@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This patch wraps together several changes needed for on-demand paging support
in the mlx5_ib_populate_pas function, and when registering memory regions.
* Instead of accepting a UMR bit telling the function to enable all
access flags, the function now accepts the access flags themselves.
* For on-demand paging memory regions, fill the memory tables from the
correct list, and enable/disable the access flags per-page according
to whether the page is present.
* A new bit is set to enable writing of access flags when using the
firmware create_mkey command.
* Disable contig pages when on-demand paging is enabled.
In addition the patch changes the UMR code to use PTR_ALIGN instead of
our own macro.
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
The patch adds infrastructure to query ODP capabilities in the mlx5
driver. The code will read the capabilities from the device, and
enable only those capabilities that both the driver and the device
supports. At this point ODP is not supported, so no capability is
copied from the device, but the patch exposes the global ODP device
capability bit.
Signed-off-by: Shachar Raindel <raindel@mellanox.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Add a helper function mlx5_ib_read_user_wqe to read information from
user-space owned work queues. The function will be used in a later
patch by the page-fault handling code in mlx5_ib.
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
[ Add stub for ib_umem_copy_from() for CONFIG_INFINIBAND_USER_MEM=n
- Roland ]
Signed-off-by: Roland Dreier <roland@purestorage.com>
The current UMR interface doesn't allow partial updates to a memory
region's page tables. This patch changes the interface to allow that.
It also changes the way the UMR operation validates the memory
region's state. When set, IB_SEND_UMR_FAIL_IF_FREE will cause the UMR
operation to fail if the MKEY is in the free state. When it is
unchecked the operation will check that it isn't in the free state.
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Shachar Raindel <raindel@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Since UMR code now uses its own context struct on the stack, the pas
and dma pointers for the UMR operation that remained in the mlx5_ib_mr
struct are not necessary. This patch removes them.
Fixes: a74d24168d ("IB/mlx5: Refactor UMR to have its own context struct")
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
There were many places where parameters which should be u8/u16 were
integer type.
Additionally, in 2 places, a check for a non-null pointer was added
before dereferencing the pointer (this is actually a bug fix).
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
