8ffd778aff
966622 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Tyler Hicks
|
8ffd778aff |
tpm: efi: Don't create binary_bios_measurements file for an empty log
Mimic the pre-existing ACPI and Device Tree event log behavior by not
creating the binary_bios_measurements file when the EFI TPM event log is
empty.
This fixes the following NULL pointer dereference that can occur when
reading /sys/kernel/security/tpm0/binary_bios_measurements after the
kernel received an empty event log from the firmware:
BUG: kernel NULL pointer dereference, address: 000000000000002c
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 3932 Comm: fwupdtpmevlog Not tainted 5.9.0-00003-g629990edad62 #17
Hardware name: LENOVO 20LCS03L00/20LCS03L00, BIOS N27ET38W (1.24 ) 11/28/2019
RIP: 0010:tpm2_bios_measurements_start+0x3a/0x550
Code: 54 53 48 83 ec 68 48 8b 57 70 48 8b 1e 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 48 8b 82 c0 06 00 00 48 8b 8a c8 06 00 00 <44> 8b 60 1c 48 89 4d a0 4c 89 e2 49 83 c4 20 48 83 fb 00 75 2a 49
RSP: 0018:ffffa9c901203db0 EFLAGS: 00010246
RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000010
RDX: ffff8ba1eb99c000 RSI: ffff8ba1e4ce8280 RDI: ffff8ba1e4ce8258
RBP: ffffa9c901203e40 R08: ffffa9c901203dd8 R09: ffff8ba1ec443300
R10: ffffa9c901203e50 R11: 0000000000000000 R12: ffff8ba1e4ce8280
R13: ffffa9c901203ef0 R14: ffffa9c901203ef0 R15: ffff8ba1e4ce8258
FS: 00007f6595460880(0000) GS:ffff8ba1ef880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000002c CR3: 00000007d8d18003 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? __kmalloc_node+0x113/0x320
? kvmalloc_node+0x31/0x80
seq_read+0x94/0x420
vfs_read+0xa7/0x190
ksys_read+0xa7/0xe0
__x64_sys_read+0x1a/0x20
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
In this situation, the bios_event_log pointer in the tpm_bios_log struct
was not NULL but was equal to the ZERO_SIZE_PTR (0x10) value. This was
due to the following kmemdup() in tpm_read_log_efi():
int tpm_read_log_efi(struct tpm_chip *chip)
{
...
/* malloc EventLog space */
log->bios_event_log = kmemdup(log_tbl->log, log_size, GFP_KERNEL);
if (!log->bios_event_log) {
ret = -ENOMEM;
goto out;
}
...
}
When log_size is zero, due to an empty event log from firmware,
ZERO_SIZE_PTR is returned from kmemdup(). Upon a read of the
binary_bios_measurements file, the tpm2_bios_measurements_start()
function does not perform a ZERO_OR_NULL_PTR() check on the
bios_event_log pointer before dereferencing it.
Rather than add a ZERO_OR_NULL_PTR() check in functions that make use of
the bios_event_log pointer, simply avoid creating the
binary_bios_measurements_file as is done in other event log retrieval
backends.
Explicitly ignore all of the events in the final event log when the main
event log is empty. The list of events in the final event log cannot be
accurately parsed without referring to the first event in the main event
log (the event log header) so the final event log is useless in such a
situation.
Fixes:
|
||
Jerry Snitselaar
|
b154ce11ea |
tpm_tis: Disable interrupts on ThinkPad T490s
There is a misconfiguration in the bios of the gpio pin used for the interrupt in the T490s. When interrupts are enabled in the tpm_tis driver code this results in an interrupt storm. This was initially reported when we attempted to enable the interrupt code in the tpm_tis driver, which previously wasn't setting a flag to enable it. Due to the reports of the interrupt storm that code was reverted and we went back to polling instead of using interrupts. Now that we know the T490s problem is a firmware issue, add code to check if the system is a T490s and disable interrupts if that is the case. This will allow us to enable interrupts for everyone else. If the user has a fixed bios they can force the enabling of interrupts with tpm_tis.interrupts=1 on the kernel command line. Cc: Peter Huewe <peterhuewe@gmx.de> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
Linus Torvalds
|
521b619acd |
linux-kselftest-kunit-fixes-5.10-rc3
This Kunit update for Linux 5.10-rc3 consists of several kunit_tool and documentation fixes. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl+kIFcACgkQCwJExA0N QxyQZw//UY+j9RFweODCfP+hfYYcv71/J8ZAD+L9mcu4+zm85nrJ5vy1LAMGB7km Wwi7NvJtbzjcJ/CEdKEOL/GZJsGoUFit0keFm0CmUcul751M/SuxbXGfST5e0LTQ E7MPpQOYWklMEdu+WbofW8wy77Fk57J5k2/IfVTBiFxGuEmiAfb32HSyN9emTgYt 4xeOJfq3hl5+ns00WbScDiu3jdmrEkvEoe1FKFAPHqBWfUeOioYMY3CagggiCvrp Ml5Nhd8gqDjBv7DDaZCGq2o0ibM61EZj26l363ZvcsWYiXdSlcjfnw6rEF3T1GTD sM5ky7bUbEZEM7v6kVZa6YiUVgRr5gE794s4fIpTJqUHkSg0wURjNNQlE/yr2GUt pGV3NtEMH+27n4EdkEZbufLGpcUz3bnH2yrAPpfpGhDnkfnCjlT56rbEiCvpjfPd 7lKUJXbl6YAEJpQC1oV3HywUEW7ckyxKXseLv0xh0hjkjjMNiy3w9+SQtdaKKx2Q r6MKpUqDg+wxyz6bcb66JlZq/LRIlYydsCciU0VjIX+rAI7OTdNC7tph9qa6Vh/D 1LUJegumDhPlh6zqHvUWaH0m42cUbfGfODo7NbqlndQz2Ocg9Vg4bll0HA8WR6h8 u3UOeL5EE84gGmUP1mLicVqgoc3CLgVmpahkFHhf3lsH4iX7SKM= =2gLZ -----END PGP SIGNATURE----- Merge tag 'linux-kselftest-kunit-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kunit fixes from Shuah Khan: "Several kunit_tool and documentation fixes" * tag 'linux-kselftest-kunit-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tools: fix kunit_tool tests for parsing test plans Documentation: kunit: Update Kconfig parts for KUNIT's module support kunit: test: fix remaining kernel-doc warnings kunit: Don't fail test suites if one of them is empty kunit: Fix kunit.py --raw_output option |
||
|
Linus Torvalds
|
3249fe4563 |
Tracing fixes:
- Fix off-by-one error in retrieving the context buffer for trace_printk() - Fix off-by-one error in stack nesting limit - Fix recursion to not make all NMI code false positive as recursing - Stop losing events in function tracing when transitioning between irq context - Stop losing events in ring buffer when transitioning between irq context - Fix return code of error pointer in parse_synth_field() to prevent NULL pointer dereference. - Fix false positive of NMI recursion in kprobe event handling -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX6QqmRQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qtWiAQCKf3xblmQDcge2BLQPy2H7ih5VCSSb vDPrQKgLa35pSgEAhGj7mgAKxb6kDbae1BqPorfa/qn9Bi13XfRNTxBK2Qw= =zKfd -----END PGP SIGNATURE----- Merge tag 'trace-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Fix off-by-one error in retrieving the context buffer for trace_printk() - Fix off-by-one error in stack nesting limit - Fix recursion to not make all NMI code false positive as recursing - Stop losing events in function tracing when transitioning between irq context - Stop losing events in ring buffer when transitioning between irq context - Fix return code of error pointer in parse_synth_field() to prevent NULL pointer dereference. - Fix false positive of NMI recursion in kprobe event handling * tag 'trace-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: kprobes: Tell lockdep about kprobe nesting tracing: Make -ENOMEM the default error for parse_synth_field() ring-buffer: Fix recursion protection transitions between interrupt context tracing: Fix the checking of stackidx in __ftrace_trace_stack ftrace: Handle tracing when switching between context ftrace: Fix recursion check for NMI test tracing: Fix out of bounds write in get_trace_buf |
||
|
Linus Torvalds
|
6732b35485 |
hyperv-fixes for 5.10-rc3
-----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAl+kK6cTHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXsv3B/9qN84MVeriRKRUn1e+F15NHqGfJezZ oS/xjo2XoFaMrTpu8DgzN2C3yMZ0eutJYloUXWCJap1yI1ZaivupAPsOxCc42HwC /lRu6vI9jPL2kUzWzusR/yuijZsfj5GYkoNRW9HM3XruXG1Ta59q1JkLhIbUJKFk KKtKJoLn2+DQe8GWp3K8gJd5kryUSFWq1j6LO8w3kfSHxzj6AmDLWgHje8d1y0qA IKeNNTsnF3kht0/oBNdf7QRKA5X1yb6kpJ9m9+0p/RxMA9eSGmH6iOc5j1VyM4a9 qf1S++4yENoGtsFzid/6XXSrBPGvI57qCB76uRvwyrDwzKkRmke/SLDj =mkuq -----END PGP SIGNATURE----- Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - clarify a comment (Michael Kelley) - change a pr_warn() to pr_info() (Olaf Hering) * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Clarify comment on x2apic mode hv_balloon: disable warning when floor reached |
||
|
Linus Torvalds
|
6f3f374ac0 |
RDMA 5.10 second rc pull request
A few more merge window regressions that didn't make rc1:
- New validation in the DMA layer triggers wrong use of the DMA layer in
rxe, siw and rdmavt
- Accidental change of a hypervisor facing ABI when widening the port
speed u8 to u16 in vmw_pvrdma
- Memory leak on error unwind in SRP target
-----BEGIN PGP SIGNATURE-----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=y+a3
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A few more merge window regressions that didn't make rc1:
- New validation in the DMA layer triggers wrong use of the DMA layer
in rxe, siw and rdmavt
- Accidental change of a hypervisor facing ABI when widening the port
speed u8 to u16 in vmw_pvrdma
- Memory leak on error unwind in SRP target"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/srpt: Fix typo in srpt_unregister_mad_agent docstring
RDMA/vmw_pvrdma: Fix the active_speed and phys_state value
IB/srpt: Fix memory leak in srpt_add_one
RDMA: Fix software RDMA drivers for dma mapping error
|
||
|
Linus Torvalds
|
cf26c71487 |
spi: Fixes for v5.10
A small collection of driver specific fixes that have come in since the merge window, nothing too major here but all good to ahve. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl+kBdoACgkQJNaLcl1U h9D5HAf/Znx8CshbXBUXAOlO2FnRBN6OsJk7jRoyL4+r+z76nO689CjXB1a2vbND adKj2ifYthylkt+kLiiG2H48hHmb6Yceqz9fXz7++IU9UF1ozXhwebbsj03pd1jV /UHREWeLZRf5x0AkQcNusXbcWNc4cuiFTAHigUS/+NJs3rzX3LEaQ8EazymIuAzU zS0EY6+yYpOctzdJ624IaHtBbrF7z8io83HR458Br+jArRrbmeWB9GbKaqgp2yLu t37mapV9OZd9er/wdJ+dNY5CAzQ8YYpVdth+6aCwQKA0ZuKTG5Y6+QD75EsTlHuR d8aMzf4/GCszYWqLu6hayCa6iD4SAQ== =4bPG -----END PGP SIGNATURE----- Merge tag 'spi-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small collection of driver specific fixes that have come in since the merge window, nothing too major here but all good to have" * tag 'spi-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fsl-dspi: fix wrong pointer in suspend/resume spi: bcm2835: fix gpio cs level inversion spi: imx: fix runtime pm support for !CONFIG_PM |
||
|
Linus Torvalds
|
3d55978f95 |
regulator: Fixes for v5.10
An addition to MAINTAINERS plus a fix for a nasty bootstrapping problem which caused problems when we need to read the voltage of a regulator that is not yet available during initialization, we were not correctly distinguishing between this case and the case where a regulator is put into a bypass mode. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl+kBncACgkQJNaLcl1U h9DHMQf9FzSHbhdl2h3d0quiZF88H4ukXgkHRJJeqCsVv7kTekGgui3KEB19x5+3 rATP2AMt9aF9bG9YCWt2VazrbvJQ7hSmHq9NlrbaM2UZJW/12lKJ6v33xJWSxhTl kGPhNirbNaxZ1B4SJJiiBX59puSTbaOj9JwI9MlR+8gxqE+Mk42Qz2UHNUINB3At g9zuHXts+Iure4D18vBZcu/Vcrs3x8HMYtYsZgskT6fgvt/AsHCQ8yYUP6sB2EIN h7msMvAxSwAGOBcLx6wDM3azcxz5SvAr5WeoXaMrDfUMWH2TGlTuIVhq4uXqrAVu twG4JNCLV66YE4gILSGu7FdRauOOfg== =0T87 -----END PGP SIGNATURE----- Merge tag 'regulator-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "An addition to MAINTAINERS plus a fix for a nasty bootstrapping problem which caused problems when we need to read the voltage of a regulator that is not yet available during initialization, we were not correctly distinguishing between this case and the case where a regulator is put into a bypass mode" * tag 'regulator-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: defer probe when trying to get voltage from unresolved supply MAINTAINERS: Add entry for Qualcomm IPQ4019 VQMMC regulator |
||
|
Linus Torvalds
|
f786dfa374 |
Power management fixes for 5.10-rc3.
- Unify the handling of managed and stateless device links in the
runtime PM framework and prevent runtime PM references to devices
from being leaked after device link removal (Rafael Wysocki).
- Fix two mistakes in the cpuidle documentation (Julia Lawall).
- Prevent the schedutil cpufreq governor from missing policy
limits updates in some cases (Viresh Kumar).
- Prevent static OPPs from being dropped by mistake (Viresh Kumar).
- Prevent helper function in the OPP framework from returning
prematurely (Viresh Kumar).
- Prevent opp_table_lock from being held too long during removal
of OPP tables with no more active references (Viresh Kumar).
- Drop redundant semicolon from the Intel RAPL power capping
driver (Tom Rix).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl+kAnUSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxND0P/j5e/wqFZ/34XEaUa4PIs27TDoJHq1Jh
PfUxqSBEVO6Xm8TMCtOIuS8gw4x7ehenXC8gFdivy+Fu+4QNkPKYggF5/LgWO8Gl
cMNzYwJ8shIBQWQZftIx01Bn5tAvk1YhV1mnSNf580Iy7FhKqojMnrvzQnpGD4jR
piBkvBcbIJWDk+T96RzbqnqmMD0euvlYfzg1KnsyqsOpoRl7kZoH4ahWYskdIxDY
NtA4SqQ8dvxjTwI8+a+JBb//ua9jjjDyjd7FUV87HMdcVh9rZKbmHKkk4Yv/3C4C
jZuCTV6zaWIHCbbkZwi+OTNE8q21GgWm1xqwnGWVTFSGrs8ZyfjLs73/g9S5zI3N
C/n4YUJxiYDVcnrAVwR7kSTEouiQ6mTuChOt7T3r1Ilx67rw4TDsI59Fk1Xn07bZ
1wfaPASUPsFAxF7vMhkdzsidhpR3BYNgMwmAWo9R4Yvw4evyRN4tywoUQJ1X27zg
ERir6mFVz6XCnXPrJhyx0bWLo+VD8J/arhfIPSTqHR7wn0tgc23aVeYy7wvfYiiu
QQJqQ58Aoa0Z7ZpeAv3xbSung+eqQ/dDC9FnXqxdZCI6brYUhrZ19OhsFnEyzGUR
IDRzcP1/72AxhidpjO71txOJSJFTqKF2LzL/wuS6kMbYwmFjYfj18xX5GvOUuXmL
hO+E+QdleQFo
=lKQA
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the device links support in runtime PM, correct mistakes in
the cpuidle documentation, fix the handling of policy limits changes
in the schedutil cpufreq governor, fix assorted issues in the OPP
(operating performance points) framework and make one janitorial
change.
Specifics:
- Unify the handling of managed and stateless device links in the
runtime PM framework and prevent runtime PM references to devices
from being leaked after device link removal (Rafael Wysocki).
- Fix two mistakes in the cpuidle documentation (Julia Lawall).
- Prevent the schedutil cpufreq governor from missing policy limits
updates in some cases (Viresh Kumar).
- Prevent static OPPs from being dropped by mistake (Viresh Kumar).
- Prevent helper function in the OPP framework from returning
prematurely (Viresh Kumar).
- Prevent opp_table_lock from being held too long during removal of
OPP tables with no more active references (Viresh Kumar).
- Drop redundant semicolon from the Intel RAPL power capping driver
(Tom Rix)"
* tag 'pm-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Resume the device earlier in __device_release_driver()
PM: runtime: Drop pm_runtime_clean_up_links()
PM: runtime: Drop runtime PM references to supplier on link removal
powercap/intel_rapl: remove unneeded semicolon
Documentation: PM: cpuidle: correct path name
Documentation: PM: cpuidle: correct typo
cpufreq: schedutil: Don't skip freq update if need_freq_update is set
opp: Reduce the size of critical section in _opp_table_kref_release()
opp: Fix early exit from dev_pm_opp_register_set_opp_helper()
opp: Don't always remove static OPPs in _of_add_opp_table_v1()
|
||
|
Linus Torvalds
|
1a092479f3 |
Fix highmem initialization on arm and xtensa
Recent refactoring of memblock iterators has broken initialization of highmem on arm and xtensa because it changed the way beginning and end of memory regions are rounded to PFNs. This fix restores the original behaviour. -----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAl+j9K0THHJwcHRAbGlu dXguaWJtLmNvbQAKCRA5A4Ymyw79kbLGB/9ZQyGJaLz70dOFF2St5ei1QMsBboLW WWZYdRsuLnRfXkBxgQp2D60pE6NxP8A61Wuq5Qa8iE7GjXwlTmCiMZPAB1N15zZ5 DhDR6O6douu5EPvdpX3cFtHRCVRCYFDcX1ovm2AaODLlM4jLuHuTHE4OxLAaTsTV 4vLOOMSTfFcm95gEn7yogC+NuwQxdYErNBNe36Yy+TFaxQYy63+hMgpLRAJqkRnV SzIs8ur1R2i5Z/QDFh3JZO6kEY78qSgrT0ubc7G9/29qS5uvg3MmiJdqnUvQlDt7 ClttZKv731RsWnyf6HgdWSKet8w68T84Jegn9/zKnVBStwNYkx2KkwNH =p+K2 -----END PGP SIGNATURE----- Merge tag 'fixes-2020-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull highmem initialization fix from Mike Rapoport: "Fix highmem initialization on arm and xtensa Recent refactoring of memblock iterators has broken initialization of highmem on arm and xtensa because it changed the way beginning and end of memory regions are rounded to PFNs. This fix restores the original behaviour" * tag 'fixes-2020-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: ARM, xtensa: highmem: avoid clobbering non-page aligned memory reservations |
||
|
Linus Torvalds
|
d1dd461207 |
Various gfs2 fixes
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEEJZs3krPW0xkhLMTc1b+f6wMTZToFAl+j0ZsUHGFncnVlbmJh QHJlZGhhdC5jb20ACgkQ1b+f6wMTZTpJeRAAoTNP1n9Pa4B1Et76S7GJiaLExemK THT+hzXf5hGdd5x9nV12bhDb0OTTcZCcCXn2e7aPTBmACJpOcxjgHp0egchac1GV ea/1xkN9HJKGaWaFngUdNhlBJdea9a3QgJcXScSDRxLo7+6qIN98PsxGMu+rqicJ N2jKMYUgKpz51FCSSewS2zN0+ZKD8QnJNpVt9yH9lEeIb6cuMywYZk4+8XR2zLtv 7ttTIPm3qD6dUhaGn3Q/11pcHHVF5sJ3DfifMj9322p7osu+mYNYjHj9slXXZPpv LvvDBTH7k4+LjBT+0LJ8tWPAIPbG9PjC/jpOE3MKPQ/bMWGZup5Fvz9mPQZLK9Q8 6HwyvvcPxspYrQE3wHXu4vAKU+gJZYTIUgtDmykmAtcPIf0am4Qc2qhwHyGjS2CT 7LkLE3sT8wgsbRB4PrCq3gW64EZp59++X2RF5003gqiPJ9UL0feg+LMTkHHKR+if McPgOBEk3vkbYHUpKbOcP5Z3RuistiGwgYauWQXbB3tpPH40X9HZnD2cXS3iSU79 r/muaJBvjK4+H8OkRENNSyTWKZrKpbJ2zPQaVl1U+XaAFEA3kIgViEsgPAeh3eXY K4fbwJqx/daLlIZSouol9JCpSj8PHOukTaTj99LeDHesc8JmZ43ozCMzkT1mQM19 +S3I6LojyFRDjTg= =8z2V -----END PGP SIGNATURE----- Merge tag 'gfs2-v5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fixes from Andreas Gruenbacher: "Various gfs2 fixes" * tag 'gfs2-v5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Wake up when sd_glock_disposal becomes zero gfs2: Don't call cancel_delayed_work_sync from within delete work function gfs2: check for live vs. read-only file system in gfs2_fitrim gfs2: don't initialize statfs_change inodes in spectator mode gfs2: Split up gfs2_meta_sync into inode and rgrp versions gfs2: init_journal's undo directive should also undo the statfs inodes gfs2: Add missing truncate_inode_pages_final for sd_aspace gfs2: Free rd_bits later in gfs2_clear_rgrpd to fix use-after-free |
||
|
Linus Torvalds
|
e2557a2cde |
pci-v5.10-fixes-1
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl+jExMUHGJoZWxnYWFz QGdvb2dsZS5jb20ACgkQWYigwDrT+vzweRAAkFJPHpi8ZL+2zX9U/mEPZsP0X8j+ ulYoPn41NUuEWTObv3MFBXCrYcvacbAYBc109ih1gchbpgr2Khipn2NEZbPmlUc2 EQbIZJ5GO2z9DZc7UEZRqU3MU74YwAfVUSE5Su4Z8/L+5PXkwIzJFrbZFzEyucg3 lfT2HCrQcky2MzN2eo/1SBvrd6kZxrasBtLFBwP9NvBXWeYOwOz7vVRzY54xDqeg Tary2xUiVOrm84ELa1QaKqc5eozp0qw6URhRStp98iDTPWhubgk148FZMWst5/dp Vq9oPnZQ8ViLqgb6vHSoex4w2ZsJBquHNeICf7CGhwyTp+M6Fp4yt7dtu20d7ff2 UPAWC/lGUZeYks5Esp5CtcFB6vvBxMxu0hYkTVAr+v0TaQmKTADvJZKSCn+M9SwR +D0hqEgh3rdzB4pisbV/obdEFCnHjaioV0OXNeR+3E1sEXSj0vx7XLjuUfk6VTly Y+/c/SReYmYAHfiPPArboWJCbfLJqm1R42dtfRAg5tmSjuUMgPxWqCcHY4USadK3 o2I9zXaeP9QhJpwexo0FZOZEWKxYyl2RSodgiIfqMzrf35bYwgK7sgiiLnRM117k yhMBIw3kwDd2YuFbOnu5SXza/qWbcBZMjrT2sHO5CGVSRiwy5pqEZwmDknqwhONn bLj4Czp9ZqC5ObM= =lCCR -----END PGP SIGNATURE----- Merge tag 'pci-v5.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Fix ACS regression that broke device pass-through (Rajat Jain) - Revert DesignWare ATU memory resource to use last entry to fix Tegra194 regression (Rob Herring) - Remove duplicate mvebu resource requests to fix regression on Turris Omnia (Rob Herring) * tag 'pci-v5.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: mvebu: Fix duplicate resource requests PCI: dwc: Restore ATU memory resource setup to use last entry PCI: Always enable ACS even if no ACS Capability |
||
Jason Gunthorpe
|
21fcdeec09 |
RDMA/srpt: Fix typo in srpt_unregister_mad_agent docstring
htmldocs fails with:
drivers/infiniband/ulp/srpt/ib_srpt.c:630: warning: Function parameter or member 'port_cnt' not described in 'srpt_unregister_mad_agent'
Fixes:
|
||
Rafael J. Wysocki
|
8c14577df4 |
Merge branches 'pm-cpufreq', 'pm-cpuidle', 'pm-opp' and 'powercap'
* pm-cpufreq: cpufreq: schedutil: Don't skip freq update if need_freq_update is set * pm-cpuidle: Documentation: PM: cpuidle: correct path name Documentation: PM: cpuidle: correct typo * pm-opp: opp: Reduce the size of critical section in _opp_table_kref_release() opp: Fix early exit from dev_pm_opp_register_set_opp_helper() opp: Don't always remove static OPPs in _of_add_opp_table_v1() * powercap: powercap/intel_rapl: remove unneeded semicolon |
||
Rob Herring
|
832ea23427 |
PCI: mvebu: Fix duplicate resource requests
With commit |
||
|
Rob Herring
|
9fff3256f9 |
PCI: dwc: Restore ATU memory resource setup to use last entry
Prior to commit |
||
Zhao Qiang
|
9bd77a9ce3
|
spi: fsl-dspi: fix wrong pointer in suspend/resume
Since commit |
||
Steven Rostedt (VMware)
|
645f224e7b |
kprobes: Tell lockdep about kprobe nesting
Since the kprobe handlers have protection that prohibits other handlers from executing in other contexts (like if an NMI comes in while processing a kprobe, and executes the same kprobe, it will get fail with a "busy" return). Lockdep is unaware of this protection. Use lockdep's nesting api to differentiate between locks taken in INT3 context and other context to suppress the false warnings. Link: https://lore.kernel.org/r/20201102160234.fa0ae70915ad9e2b21c08b85@kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Ard Biesheuvel
|
b9bc36704c |
ARM, xtensa: highmem: avoid clobbering non-page aligned memory reservations
free_highpages() iterates over the free memblock regions in high memory, and marks each page as available for the memory management system. Until commit |
||
|
Linus Torvalds
|
4ef8451b33 |
perf tools updates for v5.10: 2nd batch.
- Fix visibility attribute in python module init code with newer gcc.
- Fix DRAM_BW_Use 0 issue for CLX/SKX in intel JSON vendor event files.
- Fix the build on new fedora by removing LTO compiler options when
building perl support.
- Remove broken __no_tail_call attribute.
- Fix segfault when trying to trace events by cgroup.
- Fix crash with non-jited BPF progs.
- Increase buffer size in TUI browser, fixing format truncation.
- Fix printing of build-id for objects lacking one.
- Fix byte swapping for ino_generation field in MMAP2 perf.data records.
- Fix byte swapping for CGROUP perf.data records, for cross arch
analysis of perf.data files.
- Fix the fast path of feature detection.
- Update kernel header copies.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test results:
The first ones are container based builds of tools/perf with and without libelf
support. Where clang is available, it is also used to build perf with/without
libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
when clang and its devel libraries are installed.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
$ grep "model name" -m1 /proc/cpuinfo
model name: AMD Ryzen 9 3900X 12-Core Processor
$ export PERF_TARBALL=http://192.168.86.5/perf/perf-5.10.0-rc2.tar.xz
# dm
1 86.33 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
2 105.30 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
3 92.97 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
4 102.42 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
5 74.82 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
6 80.90 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
7 94.76 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
8 108.65 alpine:3.11 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
9 99.57 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
10 105.71 alpine:edge : Ok gcc (Alpine 10.2.0) 10.2.0, Alpine clang version 10.0.1
11 64.48 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
12 79.07 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 10.0.0
13 75.88 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.3.1 20200518 (ALT Sisyphus 9.3.1-alt1), clang version 10.0.1
14 21.77 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
15 21.07 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
16 11.56 centos:6 : FAIL gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
In file included from util/bpf-loader.h:11,
from builtin-record.c:39:
/git/linux/tools/lib/bpf/libbpf.h:203: error: wrong number of arguments specified for 'deprecated' attribute
17 30.56 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39)
18 103.81 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 9.0.1 (Red Hat 9.0.1-2.module_el8.2.0+309+0c7b6b03)
19 55.87 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.2.1 20201022 releases/gcc-10.2.0-423-g523e6e5bd4, clang version 10.0.1
20 69.63 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
21 73.47 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
22 69.11 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8+deb10u2 (tags/RELEASE_701/final)
23 73.16 debian:experimental : Ok gcc (Debian 10.2.0-15) 10.2.0, Debian clang version 11.0.0-3
24 28.77 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0
25 28.47 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
26 29.00 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
27 64.28 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
28 73.58 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
29 25.26 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
30 74.19 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
31 85.77 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
32 85.91 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
33 95.26 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
34 101.02 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
35 102.27 fedora:30 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
36 24.61 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
37 101.92 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-2.fc31)
38 86.42 fedora:32 : Ok gcc (GCC) 10.2.1 20201016 (Red Hat 10.2.1-6), clang version 10.0.1 (Fedora 10.0.1-3.fc32)
39 86.30 fedora:33 : Ok gcc (GCC) 10.2.1 20201005 (Red Hat 10.2.1-5), clang version 11.0.0 (Fedora 11.0.0-1.fc33)
40 86.91 fedora:rawhide : Ok gcc (GCC) 10.2.1 20201016 (Red Hat 10.2.1-6), clang version 11.0.0 (Fedora 11.0.0-2.fc34)
41 33.35 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.3.0-r1 p3) 9.3.0
42 64.86 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
43 79.26 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
44 319.23 openmandriva:cooker : Ok gcc (GCC) 10.2.0 20200723 (OpenMandriva), OpenMandriva 11.0.0-1 clang version 11.0.0 (/builddir/build/BUILD/llvm-project-llvmorg-11.0.0/clang e49ac65e101d9c5056eb545360b8bd05ff47cd0b)
45 109.02 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190905 [gcc-7-branch revision 275407], clang version 5.0.1 (tags/RELEASE_501/final 312548)
46 114.37 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
47 105.37 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 9.0.1
48 99.00 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
49 100.28 opensuse:tumbleweed : Ok gcc (SUSE Linux) 10.2.1 20200825 [revision c0746a1beb1ba073c7981eb09f55b3d993b32e5c], clang version 10.0.1
50 11.06 oraclelinux:6 : FAIL gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
In file included from util/bpf-loader.h:11,
from builtin-record.c:39:
/git/linux/tools/lib/bpf/libbpf.h:203: error: wrong number of arguments specified for 'deprecated' attribute
51 29.40 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44.0.3)
52 102.98 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d)
53 25.77 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
54 29.06 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
55 72.21 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
56 25.27 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
57 25.62 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
58 24.79 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
59 25.37 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
60 24.87 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
61 24.87 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
62 82.58 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
63 26.97 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
64 27.10 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
65 22.00 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
66 25.69 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
67 28.57 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
68 28.67 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
69 157.32 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
70 24.17 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
71 25.90 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
72 23.71 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
73 64.79 ubuntu:19.10 : Ok gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 8.0.1-3build1 (tags/RELEASE_801/final)
74 26.17 ubuntu:19.10-x-alpha : Ok alpha-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008
75 23.59 ubuntu:19.10-x-hppa : Ok hppa-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008
76 68.50 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, clang version 10.0.0-4ubuntu1
77 29.56 ubuntu:20.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 10.2.0-5ubuntu1~20.04) 10.2.0
78 69.18 ubuntu:20.10 : Ok gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, Ubuntu clang version 11.0.0-2
$
# uname -a
Linux quaco 5.8.14-200.fc32.x86_64 #1 SMP Wed Oct 7 14:47:56 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
# git log --oneline -1
|
||
|
Linus Torvalds
|
e6b0bd61a7 |
This pull contains a series of warning fixes from Mauro; once applied, the
number of warnings from the once-noisy docs build process is nearly zero. Getting to this point has required a lot of work; once there, hopefully we can keep things that way. I have packaged this as a separate pull because it does a fair amount of reaching outside of Documentation/. The changes are all in comments and in code placement. It's all been in linux-next since last week. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl+hscQPHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5YgZAH/0JeDA/1VLZYYTmdABz8mjBZsoW9tyPGGztF nsh5ykdHhL3MeTRwumW5armLVrfKhd1XT+nIzD7OcWlqu+RDOvQ5I95rahr473hP 1SHTjqm3/AlJwQoeS72X5U6QEJQ58e2IwCbP23H3x7I3Q3snEA/HhswzxurfoB/Z j81YzDV2YPEc0LJWZ5Vn0NEdwP8cdpFv5rojsQmepq7K0yJ7tEHb7/u2cEuUBgXS 8LcYCNPLpiN+q5N8uQ5oDjIUNdLQvP03kgKtQWiCTr4BRydOrDlJie28LIedamEz anu7UfaVK4bxn+ugRI0g2+aWQKux81ULCinKUWmLRNbcxjhaQqQ= =hDfp -----END PGP SIGNATURE----- Merge tag 'docs-5.10-warnings' of git://git.lwn.net/linux Pull documentation build warning fixes from Jonathan Corbet: "This contains a series of warning fixes from Mauro; once applied, the number of warnings from the once-noisy docs build process is nearly zero. Getting to this point has required a lot of work; once there, hopefully we can keep things that way. I have packaged this as a separate pull because it does a fair amount of reaching outside of Documentation/. The changes are all in comments and in code placement. It's all been in linux-next since last week" * tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits) docs: SafeSetID: fix a warning amdgpu: fix a few kernel-doc markup issues selftests: kselftest_harness.h: fix kernel-doc markups drm: amdgpu_dm: fix a typo gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups drm: amdgpu: kernel-doc: update some adev parameters docs: fs: api-summary.rst: get rid of kernel-doc include IB/srpt: docs: add a description for cq_size member locking/refcount: move kernel-doc markups to the proper place docs: lockdep-design: fix some warning issues MAINTAINERS: fix broken doc refs due to yaml conversion ice: docs fix a devlink info that broke a table crypto: sun8x-ce*: update entries to its documentation net: phy: remove kernel-doc duplication mm: pagemap.h: fix two kernel-doc markups blk-mq: docs: add kernel-doc description for a new struct member docs: userspace-api: add iommu.rst to the index file docs: hwmon: mp2975.rst: address some html build warnings docs: net: statistics.rst: remove a duplicated kernel-doc docs: kasan.rst: add two missing blank lines ... |
||
|
Linus Torvalds
|
ce2e33ba41 |
A small number of fixes, plus a build tweak to respect the desire for
silence in V=0 builds. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl+hdscPHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5YOHYH/jMaHkXTOVQZIFouNn1nSymdk7ErTEinkVKu l2E1teuyqY6nrZVWut8dtJEPSiMFxkjXP7qyvG3kAUEOz7axi0XhTPudLihBMj2N xqUuOGoOpLhEa/F2jm1sDbS0NFmYtWkur/kZB4ibMVa5dp1jj61s1qAADhPDUXzH J7H2AIGpVJkQyzFjslI7thwFGSR80ID49zVnAAI5b+MCayofij3Tn/wqdCGjecNa 5e/qPBxM/E8XkMq0mxUGvOvlDQd01LpCkr01wJeU+lgm3J48iGPnRqiRtae4kSMv fYIaNvClhYARzMOwi4ExDJHUa0cp99FPXJ3enqsrEqo9yLkUw1I= =PbGq -----END PGP SIGNATURE----- Merge tag 'docs-5.10-3' of git://git.lwn.net/linux Pull documentation fixes from Jonathan Corbet: "A small number of fixes, plus a build tweak to respect the desire for silence in V=0 builds" * tag 'docs-5.10-3' of git://git.lwn.net/linux: docs: fix automarkup regression on Python 2 documentation: arm: sunxi: add Allwinner H6 documents scripts: kernel-doc: split typedef complex regex scripts: kernel-doc: fix typedef parsing docs: Makefile: honor V=0 for docs building |
||
|
Linus Torvalds
|
43c834186c |
A couple of changes to the SEV-ES code to perform more stringent
hypervisor checks before enabling encryption. (Joerg Roedel) -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAl+hKN8ACgkQEsHwGGHe VUrkZQ/+LWjbDrbkLCQpWuzLagAocZMKKvr4+2ujU+krj0QU5FFJbfuzhkktQD+H cbfOW7+E8lqTDoj/dwoJPj2Xs8HvW4Ua6sbxF5lCPhlEr3NIetRfQ7SPj3qFvQG+ FKP/55RSnjKIx7aZXKN9YAw2FF3EC1BisjszCBKid5S8HbGqjLMb2Ue0i/nssksY CvLwaxtDOGuSzJ8FwL+vmI70NkeLZ0ulTxbuxXAqfMTvJX3e1QA9dgeZMgfU1hng eA1Pjlm0X7FOsnwihYP2EZ6NzRrTkYeGl1Iagz1apqlDlQ+bcaxvs2btIyb7MKt5 6PPDGg0P0WVMNfOEUYTZob31QcLnakA/p8kG8sYE6h2PlqO9Tf5cpmOJ6pv+DYFz hfcjAZfamStUbWdWpr33RVCXN5pwZRu+UytD3JYykzgwmKXQxLHqrbjHXLO3zJ7k +L0JE+N2vmi/7M5Ghsv3yKwy5fR5rMT5V6qEHSd1qrr9VpKBceNMJgPA8wh4882F SD5sD2b6L/Cf9L4FAFqICHb/p4rxPRf5VnUoybo70U7EiwfbZQik5g3X5cO4KO2N 0z8nMk7dIZncQF0LYJNElIvKonrU8sIa+TbHjYyBWdQlOPgK4IlCvZeyjVUvUG24 kYx2WbANhCxGFd86rsl5P7xNXvBiSALf1afbQPvU0VTbZ43vSnQ= =Pvgr -----END PGP SIGNATURE----- Merge tag 'x86_seves_for_v5.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SEV-ES fixes from Borislav Petkov: "A couple of changes to the SEV-ES code to perform more stringent hypervisor checks before enabling encryption (Joerg Roedel)" * tag 'x86_seves_for_v5.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev-es: Do not support MMIO to/from encrypted memory x86/head/64: Check SEV encryption before switching to kernel page-table x86/boot/compressed/64: Check SEV encryption in 64-bit boot-path x86/boot/compressed/64: Sanity-check CPUID results in the early #VC handler x86/boot/compressed/64: Introduce sev_status |
||
David Howells
|
f4c79144ed |
afs: Fix incorrect freeing of the ACL passed to the YFS ACL store op
The cleanup for the yfs_store_opaque_acl2_operation calls the wrong
function to destroy the ACL content buffer. It's an afs_acl struct, not
a yfs_acl struct - and the free function for latter may pass invalid
pointers to kfree().
Fix this by using the afs_acl_put() function. The yfs_acl_put()
function is then no longer used and can be removed.
general protection fault, probably for non-canonical address 0x7ebde00000000: 0000 [#1] SMP PTI
...
RIP: 0010:compound_head+0x0/0x11
...
Call Trace:
virt_to_cache+0x8/0x51
kfree+0x5d/0x79
yfs_free_opaque_acl+0x16/0x29
afs_put_operation+0x60/0x114
__vfs_setxattr+0x67/0x72
__vfs_setxattr_noperm+0x66/0xe9
vfs_setxattr+0x67/0xce
setxattr+0x14e/0x184
__do_sys_fsetxattr+0x66/0x8f
do_syscall_64+0x2d/0x3a
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
|
||
|
David Howells
|
c80afa1d9c |
afs: Fix warning due to unadvanced marshalling pointer
When using the afs.yfs.acl xattr to change an AuriStor ACL, a warning
can be generated when the request is marshalled because the buffer
pointer isn't increased after adding the last element, thereby
triggering the check at the end if the ACL wasn't empty. This just
causes something like the following warning, but doesn't stop the call
from happening successfully:
kAFS: YFS.StoreOpaqueACL2: Request buffer underflow (36<108)
Fix this simply by increasing the count prior to the check.
Fixes:
|
||
Jonathan Corbet
|
4f3e69060d |
docs: fix automarkup regression on Python 2
It turns out that the Python 2 re module lacks the ASCII flag, so don't try
to use it there.
Fixes:
|
||
Alexander Aring
|
da7d554f7c |
gfs2: Wake up when sd_glock_disposal becomes zero
Commit |
||
Michał Mirosław
|
cf1ad559a2
|
regulator: defer probe when trying to get voltage from unresolved supply
regulator_get_voltage_rdev() is called in regulator probe() when
applying machine constraints. The "fixed" commit exposed the problem
that non-bypassed regulators can forward the request to its parent
(like bypassed ones) supply. Return -EPROBE_DEFER when the supply
is expected but not resolved yet.
Fixes:
|
||
Arnaldo Carvalho de Melo
|
5d020cbd86 |
tools feature: Fixup fast path feature detection
|
||
Namhyung Kim
|
2c589d933e |
perf tools: Add missing swap for cgroup events
It was missed to add a swap function for PERF_RECORD_CGROUP.
Fixes:
|
||
Jiri Olsa
|
fe01adb723 |
perf tools: Add missing swap for ino_generation
We are missing swap for ino_generation field.
Fixes:
|
||
|
Jiri Olsa
|
6311951d4f |
perf tools: Initialize output buffer in build_id__sprintf
We display garbage for undefined build_id objects, because we don't initialize the output buffer. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20201101233103.3537427-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Song Liu
|
86449b12f6 |
perf hists browser: Increase size of 'buf' in perf_evsel__hists_browse()
Making perf with gcc-9.1.1 generates the following warning:
CC ui/browsers/hists.o
ui/browsers/hists.c: In function 'perf_evsel__hists_browse':
ui/browsers/hists.c:3078:61: error: '%d' directive output may be \
truncated writing between 1 and 11 bytes into a region of size \
between 2 and 12 [-Werror=format-truncation=]
3078 | "Max event group index to sort is %d (index from 0 to %d)",
| ^~
ui/browsers/hists.c:3078:7: note: directive argument in the range [-2147483648, 8]
3078 | "Max event group index to sort is %d (index from 0 to %d)",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/stdio.h:937,
from ui/browsers/hists.c:5:
IOW, the string in line 3078 might be too long for buf[] of 64 bytes.
Fix this by increasing the size of buf[] to 128.
Fixes:
|
||
|
Arnaldo Carvalho de Melo
|
42cc0e70a2 |
tools include UAPI: Update linux/mount.h copy
To pick the changes from:
|
||
|
Arnaldo Carvalho de Melo
|
a9e27f5f98 |
tools headers UAPI: Update tools's copy of linux/perf_event.h
The diff is just tabs versus spaces, trivial. This silences this perf tools build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h' diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
aa04899a13 |
tools kvm headers: Update KVM headers from the kernel sources
Some should cause changes in tooling, like the one adding LAST_EXCP, but the way it is structured end up not making that happen. The new SVM_EXIT_INVPCID should get used by arch/x86/util/kvm-stat.c, in the svm_exit_reasons table. The tools/perf/trace/beauty part has scripts to catch changes and automagically create tables, like tools/perf/trace/beauty/kvm_ioctl.sh, but changes are needed to make tools/perf/arch/x86/util/kvm-stat.c catch those automatically. These were handled by the existing scripts: $ tools/perf/trace/beauty/kvm_ioctl.sh > before $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h $ tools/perf/trace/beauty/kvm_ioctl.sh > after $ diff -u before after --- before 2020-11-03 08:43:52.910728608 -0300 +++ after 2020-11-03 08:44:04.273959984 -0300 @@ -89,6 +89,7 @@ [0xbf] = "SET_NESTED_STATE", [0xc0] = "CLEAR_DIRTY_LOG", [0xc1] = "GET_SUPPORTED_HV_CPUID", + [0xc6] = "X86_SET_MSR_FILTER", [0xe0] = "CREATE_DEVICE", [0xe1] = "SET_DEVICE_ATTR", [0xe2] = "GET_DEVICE_ATTR", $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2020-11-03 08:45:55.522225198 -0300 +++ after 2020-11-03 08:46:12.881578666 -0300 @@ -37,4 +37,5 @@ [0x71] = "VDPA_GET_STATUS", [0x73] = "VDPA_GET_CONFIG", [0x76] = "VDPA_GET_VRING_NUM", + [0x78] = "VDPA_GET_IOVA_RANGE", }; $ This addresses these perf build warnings: Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/sie.h' differs from latest version at 'arch/s390/include/uapi/asm/sie.h' diff -u tools/arch/s390/include/uapi/asm/sie.h arch/s390/include/uapi/asm/sie.h Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h' diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Cc: Borislav Petkov <bp@suse.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
97a3863b17 |
tools UAPI: Update copy of linux/mman.h from the kernel sources
|
||
|
Arnaldo Carvalho de Melo
|
32b734e09e |
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes in: |
||
|
Arnaldo Carvalho de Melo
|
8b2fc25a94 |
tools x86 headers: Update required-features.h header from the kernel
To pick the changes from:
|
||
|
Arnaldo Carvalho de Melo
|
40a6bbf514 |
tools x86 headers: Update cpufeatures.h headers copies
To pick the changes from: |
||
|
Arnaldo Carvalho de Melo
|
d0448d6a24 |
tools headers UAPI: Update fscrypt.h copy
To get the changes from:
|
||
|
Arnaldo Carvalho de Melo
|
9e228f4898 |
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
To pick the changes in: |
||
|
Arnaldo Carvalho de Melo
|
ad6330ac2c |
tools headers UAPI: Sync prctl.h with the kernel sources
To get the changes in: |
||
|
Arnaldo Carvalho de Melo
|
d0e7b0c71f |
perf scripting python: Avoid declaring function pointers with a visibility attribute
To avoid this:
util/scripting-engines/trace-event-python.c: In function 'python_start_script':
util/scripting-engines/trace-event-python.c:1595:2: error: 'visibility' attribute ignored [-Werror=attributes]
1595 | PyMODINIT_FUNC (*initfunc)(void);
| ^~~~~~~~~~~~~~
That started breaking when building with PYTHON=python3 and these gcc
versions (I haven't checked with the clang ones, maybe it breaks there
as well):
# export PERF_TARBALL=http://192.168.86.5/perf/perf-5.9.0.tar.xz
# dm fedora:33 fedora:rawhide
1 107.80 fedora:33 : Ok gcc (GCC) 10.2.1 20201005 (Red Hat 10.2.1-5), clang version 11.0.0 (Fedora 11.0.0-1.fc33)
2 92.47 fedora:rawhide : Ok gcc (GCC) 10.2.1 20201016 (Red Hat 10.2.1-6), clang version 11.0.0 (Fedora 11.0.0-1.fc34)
#
Avoid that by ditching that 'initfunc' function pointer with its:
#define Py_EXPORTED_SYMBOL _attribute_ ((visibility ("default")))
#define PyMODINIT_FUNC Py_EXPORTED_SYMBOL PyObject*
And just call PyImport_AppendInittab() at the end of the ifdef python3
block with the functions that were being attributed to that initfunc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Peter Zijlstra
|
9ae1e990f1 |
perf tools: Remove broken __no_tail_call attribute
The GCC specific __attribute__((optimize)) attribute does not what is commonly expected and is explicitly recommended against using in production code by the GCC people. Unlike what is often expected, it doesn't add to the optimization flags, but it fully replaces them, loosing any and all optimization flags provided by the compiler commandline. The only guaranteed upon means of inhibiting tail-calls is by placing a volatile asm with side-effects after the call such that the tail-call simply cannot be done. Given the original commit wasn't specific on which calls were the problem, this removal might re-introduce the problem, which can then be re-analyzed and cured properly. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Miguel Ojeda <ojeda@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Arvind Sankar <nivedita@alum.mit.edu> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ian Rogers <irogers@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Kook <keescook@chromium.org> Cc: Martin Liška <mliska@suse.cz> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/20201028081123.GT2628@hirez.programming.kicks-ass.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Jin Yao
|
0dfbe4c646 |
perf vendor events: Fix DRAM_BW_Use 0 issue for CLX/SKX
Ian reports an issue that the metric DRAM_BW_Use often remains 0.
The metric expression for DRAM_BW_Use on CLX/SKX:
"( 64 * ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) / 1000000000 ) / duration_time"
The counts of uncore_imc/cas_count_read/ and uncore_imc/cas_count_write/
are scaled up by 64, that is to turn a count of cache lines into bytes,
the count is then divided by 1000000000 to give GB.
However, the counts of uncore_imc/cas_count_read/ and
uncore_imc/cas_count_write/ have been scaled yet.
The scale values are from sysfs, such as
/sys/devices/uncore_imc_0/events/cas_count_read.scale.
It's 6.103515625e-5 (64 / 1024.0 / 1024.0).
So if we use original metric expression, the result is not correct.
But the difficulty is, for SKL client, the counts are not scaled.
The metric expression for DRAM_BW_Use on SKL:
"64 * ( arb@event\\=0x81\\,umask\\=0x1@ + arb@event\\=0x84\\,umask\\=0x1@ ) / 1000000 / duration_time / 1000"
root@kbl-ppc:~# perf stat -M DRAM_BW_Use -a -- sleep 1
Performance counter stats for 'system wide':
190 arb/event=0x84,umask=0x1/ # 1.86 DRAM_BW_Use
29,093,178 arb/event=0x81,umask=0x1/
1,000,703,287 ns duration_time
1.000703287 seconds time elapsed
The result is expected.
So the easy way is just change the metric expression for CLX/SKX.
This patch changes the metric expression to:
"( ( ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) * 1048576 ) / 1000000000 ) / duration_time"
1048576 = 1024 * 1024.
Before (tested on CLX):
root@lkp-csl-2sp5 ~# perf stat -M DRAM_BW_Use -a -- sleep 1
Performance counter stats for 'system wide':
765.35 MiB uncore_imc/cas_count_read/ # 0.00 DRAM_BW_Use
5.42 MiB uncore_imc/cas_count_write/
1001515088 ns duration_time
1.001515088 seconds time elapsed
After:
root@lkp-csl-2sp5 ~# perf stat -M DRAM_BW_Use -a -- sleep 1
Performance counter stats for 'system wide':
767.95 MiB uncore_imc/cas_count_read/ # 0.80 DRAM_BW_Use
5.02 MiB uncore_imc/cas_count_write/
1001900010 ns duration_time
1.001900010 seconds time elapsed
Fixes:
|
||
Stanislav Ivanichkin
|
a6293f36ac |
perf trace: Fix segfault when trying to trace events by cgroup
# ./perf trace -e sched:sched_switch -G test -a sleep 1
perf: Segmentation fault
Obtained 11 stack frames.
./perf(sighandler_dump_stack+0x43) [0x55cfdc636db3]
/lib/x86_64-linux-gnu/libc.so.6(+0x3efcf) [0x7fd23eecafcf]
./perf(parse_cgroups+0x36) [0x55cfdc673f36]
./perf(+0x3186ed) [0x55cfdc70d6ed]
./perf(parse_options_subcommand+0x629) [0x55cfdc70e999]
./perf(cmd_trace+0x9c2) [0x55cfdc5ad6d2]
./perf(+0x1e8ae0) [0x55cfdc5ddae0]
./perf(+0x1e8ded) [0x55cfdc5ddded]
./perf(main+0x370) [0x55cfdc556f00]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe6) [0x7fd23eeadb96]
./perf(_start+0x29) [0x55cfdc557389]
Segmentation fault
#
It happens because "struct trace" in option->value is passed to the
parse_cgroups function instead of "struct evlist".
Fixes:
|
||
Tommi Rantala
|
ab8bf5f2e0 |
perf tools: Fix crash with non-jited bpf progs
The addr in PERF_RECORD_KSYMBOL events for non-jited bpf progs points to the bpf interpreter, ie. within kernel text section. When processing the unregister event, this causes unexpected removal of vmlinux_map, crashing perf later in cleanup: # perf record -- timeout --signal=INT 2s /usr/share/bcc/tools/execsnoop PCOMM PID PPID RET ARGS [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.208 MB perf.data (5155 samples) ] perf: tools/include/linux/refcount.h:131: refcount_sub_and_test: Assertion `!(new > val)' failed. Aborted (core dumped) # perf script -D|grep KSYM 0 0xa40 [0x48]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b530 len 0 type 1 flags 0x0 name bpf_prog_f958f6eb72ef5af6 0 0xab0 [0x48]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b530 len 0 type 1 flags 0x0 name bpf_prog_8c42dee26e8cd4c2 0 0xb20 [0x48]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b530 len 0 type 1 flags 0x0 name bpf_prog_f958f6eb72ef5af6 108563691893 0x33d98 [0x58]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b3b0 len 0 type 1 flags 0x0 name bpf_prog_bc5697a410556fc2_syscall__execve 108568518458 0x34098 [0x58]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b3f0 len 0 type 1 flags 0x0 name bpf_prog_45e2203c2928704d_do_ret_sys_execve 109301967895 0x34830 [0x58]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b3b0 len 0 type 1 flags 0x1 name bpf_prog_bc5697a410556fc2_syscall__execve 109302007356 0x348b0 [0x58]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b3f0 len 0 type 1 flags 0x1 name bpf_prog_45e2203c2928704d_do_ret_sys_execve perf: tools/include/linux/refcount.h:131: refcount_sub_and_test: Assertion `!(new > val)' failed. Here the addresses match the bpf interpreter: # grep -e ffffffffa9b6b530 -e ffffffffa9b6b3b0 -e ffffffffa9b6b3f0 /proc/kallsyms ffffffffa9b6b3b0 t __bpf_prog_run224 ffffffffa9b6b3f0 t __bpf_prog_run192 ffffffffa9b6b530 t __bpf_prog_run32 Fix by not allowing vmlinux_map to be removed by PERF_RECORD_KSYMBOL unregister event. Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201016114718.54332-1-tommi.t.rantala@nokia.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
263e452eff |
tools headers UAPI: Update process_madvise affected files
To pick the changes from:
|
||
|
Arnaldo Carvalho de Melo
|
e555b4b8d7 |
perf tools: Update copy of libbpf's hashmap.c
To pick the changes in: |