The variable rec_i contains an XDP action code not an error.
Thus, using err2str() was wrong, it should have been action2str().
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The program run against loopback interace "lo", not "eth0".
Correct the comment.
Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Andrey Ignatov says:
====================
v1->v2:
- add new types to bpftool-cgroup man page;
- add new types to bash completion for bpftool;
- don't add types that should not be in bpftool cgroup.
Add support for various BPF prog types and attach types that have been
added to kernel recently but not to bpftool or libbpf yet.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Add missing pieces for BPF_PROG_TYPE_RAW_TRACEPOINT in libbpf:
* is- and set- functions;
* support guessing prog type.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf can guess prog type and expected attach type based on section
name. Add hints for "cgroup/post_bind4" and "cgroup/post_bind6" section
names.
Existing "cgroup/sock" is not changed, i.e. expected_attach_type for it
is not set to `BPF_CGROUP_INET_SOCK_CREATE`, for backward compatibility.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Send a netlink notification when userspace adds a manually configured
address if DAD is enabled and optimistic flag isn't set.
Moreover send RTM_DELADDR notifications for tentative addresses.
Some userspace applications (e.g. NetworkManager) are interested in
addr netlink events albeit the address is still in tentative state,
however events are not sent if DAD process is not completed.
If the address is added and immediately removed userspace listeners
are not notified. This behaviour can be easily reproduced by using
veth interfaces:
$ ip -b - <<EOF
> link add dev vm1 type veth peer name vm2
> link set dev vm1 up
> link set dev vm2 up
> addr add 2001:db8:a🅱️1:2:3:4/64 dev vm1
> addr del 2001:db8:a🅱️1:2:3:4/64 dev vm1
EOF
This patch reverts the behaviour introduced by the commit f784ad3d79
("ipv6: do not send RTM_DELADDR for tentative addresses")
Suggested-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like tos inherit, ttl inherit should also means inherit the inner protocol's
ttl values, which actually not implemented in vxlan yet.
But we could not treat ttl == 0 as "use the inner TTL", because that would be
used also when the "ttl" option is not specified and that would be a behavior
change, and breaking real use cases.
So add a different attribute IFLA_VXLAN_TTL_INHERIT when "ttl inherit" is
specified with ip cmd.
Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NCSI driver defines a generic ncsi_channel_filter struct that can be
used to store arbitrarily formatted filters, and several generic methods
of accessing data stored in such a filter.
However in both the driver and as defined in the NCSI specification
there are only two actual filters: VLAN ID filters and MAC address
filters. The splitting of the MAC filter into unicast, multicast, and
mixed is also technically not necessary as these are stored in the same
location in hardware.
To save complexity, particularly in the set up and accessing of these
generic filters, remove them in favour of two specific structs. These
can be acted on directly and do not need several generic helper
functions to use.
This also fixes a memory error found by KASAN on ARM32 (which is not
upstream yet), where response handlers accessing a filter's data field
could write past allocated memory.
[ 114.926512] ==================================================================
[ 114.933861] BUG: KASAN: slab-out-of-bounds in ncsi_configure_channel+0x4b8/0xc58
[ 114.941304] Read of size 2 at addr 94888558 by task kworker/0:2/546
[ 114.947593]
[ 114.949146] CPU: 0 PID: 546 Comm: kworker/0:2 Not tainted 4.16.0-rc6-00119-ge156398bfcad #13
...
[ 115.170233] The buggy address belongs to the object at 94888540
[ 115.170233] which belongs to the cache kmalloc-32 of size 32
[ 115.181917] The buggy address is located 24 bytes inside of
[ 115.181917] 32-byte region [94888540, 94888560)
[ 115.192115] The buggy address belongs to the page:
[ 115.196943] page:9eeac100 count:1 mapcount:0 mapping:94888000 index:0x94888fc1
[ 115.204200] flags: 0x100(slab)
[ 115.207330] raw: 00000100 94888000 94888fc1 0000003f 00000001 9eea2014 9eecaa74 96c003e0
[ 115.215444] page dumped because: kasan: bad access detected
[ 115.221036]
[ 115.222544] Memory state around the buggy address:
[ 115.227384] 94888400: fb fb fb fb fc fc fc fc 04 fc fc fc fc fc fc fc
[ 115.233959] 94888480: 00 00 00 fc fc fc fc fc 00 04 fc fc fc fc fc fc
[ 115.240529] >94888500: 00 00 04 fc fc fc fc fc 00 00 04 fc fc fc fc fc
[ 115.247077] ^
[ 115.252523] 94888580: 00 04 fc fc fc fc fc fc 06 fc fc fc fc fc fc fc
[ 115.259093] 94888600: 00 00 06 fc fc fc fc fc 00 00 04 fc fc fc fc fc
[ 115.265639] ==================================================================
Reported-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding a dns_resolver key whose payload contains a very long option name
resulted in that string being printed in full. This hit the WARN_ONCE()
in set_precision() during the printk(), because printk() only supports a
precision of up to 32767 bytes:
precision 1000000 too large
WARNING: CPU: 0 PID: 752 at lib/vsprintf.c:2189 vsnprintf+0x4bc/0x5b0
Fix it by limiting option strings (combined name + value) to a much more
reasonable 128 bytes. The exact limit is arbitrary, but currently the
only recognized option is formatted as "dnserror=%lu" which fits well
within this limit.
Also ratelimit the printks.
Reproducer:
perl -e 'print "#", "A" x 1000000, "\x00"' | keyctl padd dns_resolver desc @s
This bug was found using syzkaller.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 4a2d789267 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The statistics such as InHdrErrors should be counted on the ingress
netdev rather than on the dev from the dst, which is the egress.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
BPF core gets access to __inet6_bind via ipv6_bpf_stub_impl, so it is
not invoked directly outside of af_inet6.c. Make it static and move
inet6_bind after to avoid forward declaration.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Dangaard Brouer says:
====================
XDP redirect memory return API
Submitted against net-next, as it contains NIC driver changes.
This patchset works towards supporting different XDP RX-ring memory
allocators. As this will be needed by the AF_XDP zero-copy mode.
The patchset uses mlx5 as the sample driver, which gets implemented
XDP_REDIRECT RX-mode, but not ndo_xdp_xmit (as this API is subject to
change thought the patchset).
A new struct xdp_frame is introduced (modeled after cpumap xdp_pkt).
And both ndo_xdp_xmit and the new xdp_return_frame end-up using this.
Support for a driver supplied allocator is implemented, and a
refurbished version of page_pool is the first return allocator type
introduced. This will be a integration point for AF_XDP zero-copy.
The mlx5 driver evolve into using the page_pool, and see a performance
increase (with ndo_xdp_xmit out ixgbe driver) from 6Mpps to 12Mpps.
The patchset stop at 16 patches (one over limit), but more API changes
are planned. Specifically extending ndo_xdp_xmit and xdp_return_frame
APIs to support bulking. As this will address some known limits.
V2: Updated according to Tariq's feedback
V3: Updated based on feedback from Jason Wang and Alex Duyck
V4: Updated based on feedback from Tariq and Jason
V5: Fix SPDX license, add Tariq's reviews, improve patch desc for perf test
V6: Updated based on feedback from Eric Dumazet and Alex Duyck
V7: Adapt to i40e that got XDP_REDIRECT support in-between
V8:
Updated based on feedback kbuild test robot, and adjust for mlx5 changes
page_pool only compiled into kernel when drivers Kconfig 'select' feature
V9:
Remove some inline statements, let compiler decide what to inline
Fix return value in virtio_net driver
Adjust for mlx5 changes in-between submissions
V10:
Minor adjust for mlx5 requested by Tariq
Resubmit against net-next
V11: avoid leaking info stored in frame data on page reuse
====================
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bpf infrastructure and verifier goes to great length to avoid
bpf progs leaking kernel (pointer) info.
For queueing an xdp_buff via XDP_REDIRECT, xdp_frame info stores
kernel info (incl pointers) in top part of frame data (xdp->data_hard_start).
Checks are in place to assure enough headroom is available for this.
This info is not cleared, and if the frame is reused, then a
malicious user could use bpf_xdp_adjust_head helper to move
xdp->data into this area. Thus, making this area readable.
This is not super critical as XDP progs requires root or
CAP_SYS_ADMIN, which are privileged enough for such info. An
effort (is underway) towards moving networking bpf hooks to the
lesser privileged mode CAP_NET_ADMIN, where leaking such info
should be avoided. Thus, this patch to clear the info when
needed.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changing API ndo_xdp_xmit to take a struct xdp_frame instead of struct
xdp_buff. This brings xdp_return_frame and ndp_xdp_xmit in sync.
This builds towards changing the API further to become a bulk API,
because xdp_buff is not a queue-able object while xdp_frame is.
V4: Adjust for commit 59655a5b6c ("tuntap: XDP_TX can use native XDP")
V7: Adjust for commit d9314c474d ("i40e: add support for XDP_REDIRECT")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changing API xdp_return_frame() to take struct xdp_frame as argument,
seems like a natural choice. But there are some subtle performance
details here that needs extra care, which is a deliberate choice.
When de-referencing xdp_frame on a remote CPU during DMA-TX
completion, result in the cache-line is change to "Shared"
state. Later when the page is reused for RX, then this xdp_frame
cache-line is written, which change the state to "Modified".
This situation already happens (naturally) for, virtio_net, tun and
cpumap as the xdp_frame pointer is the queued object. In tun and
cpumap, the ptr_ring is used for efficiently transferring cache-lines
(with pointers) between CPUs. Thus, the only option is to
de-referencing xdp_frame.
It is only the ixgbe driver that had an optimization, in which it can
avoid doing the de-reference of xdp_frame. The driver already have
TX-ring queue, which (in case of remote DMA-TX completion) have to be
transferred between CPUs anyhow. In this data area, we stored a
struct xdp_mem_info and a data pointer, which allowed us to avoid
de-referencing xdp_frame.
To compensate for this, a prefetchw is used for telling the cache
coherency protocol about our access pattern. My benchmarks show that
this prefetchw is enough to compensate the ixgbe driver.
V7: Adjust for commit d9314c474d ("i40e: add support for XDP_REDIRECT")
V8: Adjust for commit bd658dda42 ("net/mlx5e: Separate dma base address
and offset in dma_sync call")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch shows how it is possible to have both the driver local page
cache, which uses elevated refcnt for "catching"/avoiding SKB
put_page returns the page through the page allocator. And at the
same time, have pages getting returned to the page_pool from
ndp_xdp_xmit DMA completion.
The performance improvement for XDP_REDIRECT in this patch is really
good. Especially considering that (currently) the xdp_return_frame
API and page_pool_put_page() does per frame operations of both
rhashtable ID-lookup and locked return into (page_pool) ptr_ring.
(It is the plan to remove these per frame operation in a followup
patchset).
The benchmark performed was RX on mlx5 and XDP_REDIRECT out ixgbe,
with xdp_redirect_map (using devmap) . And the target/maximum
capability of ixgbe is 13Mpps (on this HW setup).
Before this patch for mlx5, XDP redirected frames were returned via
the page allocator. The single flow performance was 6Mpps, and if I
started two flows the collective performance drop to 4Mpps, because we
hit the page allocator lock (further negative scaling occurs).
Two test scenarios need to be covered, for xdp_return_frame API, which
is DMA-TX completion running on same-CPU or cross-CPU free/return.
Results were same-CPU=10Mpps, and cross-CPU=12Mpps. This is very
close to our 13Mpps max target.
The reason max target isn't reached in cross-CPU test, is likely due
to RX-ring DMA unmap/map overhead (which doesn't occur in ixgbe to
ixgbe testing). It is also planned to remove this unnecessary DMA
unmap in a later patchset
V2: Adjustments requested by Tariq
- Changed page_pool_create return codes not return NULL, only
ERR_PTR, as this simplifies err handling in drivers.
- Save a branch in mlx5e_page_release
- Correct page_pool size calc for MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ
V5: Updated patch desc
V8: Adjust for b0cedc844c ("net/mlx5e: Remove rq_headroom field from params")
V9:
- Adjust for 121e892754 ("net/mlx5e: Refactor RQ XDP_TX indication")
- Adjust for 73281b78a3 ("net/mlx5e: Derive Striding RQ size from MTU")
- Correct handling if page_pool_create fail for MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ
V10: Req from Tariq
- Change pool_size calc for MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New allocator type MEM_TYPE_PAGE_POOL for page_pool usage.
The registered allocator page_pool pointer is not available directly
from xdp_rxq_info, but it could be (if needed). For now, the driver
should keep separate track of the page_pool pointer, which it should
use for RX-ring page allocation.
As suggested by Saeed, to maintain a symmetric API it is the drivers
responsibility to allocate/create and free/destroy the page_pool.
Thus, after the driver have called xdp_rxq_info_unreg(), it is drivers
responsibility to free the page_pool, but with a RCU free call. This
is done easily via the page_pool helper page_pool_destroy() (which
avoids touching any driver code during the RCU callback, which could
happen after the driver have been unloaded).
V8: address issues found by kbuild test robot
- Address sparse should be static warnings
- Allow xdp.o to be compiled without page_pool.o
V9: Remove inline from .c file, compiler knows best
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Need a fast page recycle mechanism for ndo_xdp_xmit API for returning
pages on DMA-TX completion time, which have good cross CPU
performance, given DMA-TX completion time can happen on a remote CPU.
Refurbish my page_pool code, that was presented[1] at MM-summit 2016.
Adapted page_pool code to not depend the page allocator and
integration into struct page. The DMA mapping feature is kept,
even-though it will not be activated/used in this patchset.
[1] http://people.netfilter.org/hawk/presentations/MM-summit2016/generic_page_pool_mm_summit2016.pdf
V2: Adjustments requested by Tariq
- Changed page_pool_create return codes, don't return NULL, only
ERR_PTR, as this simplifies err handling in drivers.
V4: many small improvements and cleanups
- Add DOC comment section, that can be used by kernel-doc
- Improve fallback mode, to work better with refcnt based recycling
e.g. remove a WARN as pointed out by Tariq
e.g. quicker fallback if ptr_ring is empty.
V5: Fixed SPDX license as pointed out by Alexei
V6: Adjustments requested by Eric Dumazet
- Adjust ____cacheline_aligned_in_smp usage/placement
- Move rcu_head in struct page_pool
- Free pages quicker on destroy, minimize resources delayed an RCU period
- Remove code for forward/backward compat ABI interface
V8: Issues found by kbuild test robot
- Address sparse should be static warnings
- Only compile+link when a driver use/select page_pool,
mlx5 selects CONFIG_PAGE_POOL, although its first used in two patches
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the IDA infrastructure for getting a cyclic increasing ID number,
that is used for keeping track of each registered allocator per
RX-queue xdp_rxq_info. Instead of using the IDR infrastructure, which
uses a radix tree, use a dynamic rhashtable, for creating ID to
pointer lookup table, because this is faster.
The problem that is being solved here is that, the xdp_rxq_info
pointer (stored in xdp_buff) cannot be used directly, as the
guaranteed lifetime is too short. The info is needed on a
(potentially) remote CPU during DMA-TX completion time . In an
xdp_frame the xdp_mem_info is stored, when it got converted from an
xdp_buff, which is sufficient for the simple page refcnt based recycle
schemes.
For more advanced allocators there is a need to store a pointer to the
registered allocator. Thus, there is a need to guard the lifetime or
validity of the allocator pointer, which is done through this
rhashtable ID map to pointer. The removal and validity of of the
allocator and helper struct xdp_mem_allocator is guarded by RCU. The
allocator will be created by the driver, and registered with
xdp_rxq_info_reg_mem_model().
It is up-to debate who is responsible for freeing the allocator
pointer or invoking the allocator destructor function. In any case,
this must happen via RCU freeing.
Use the IDA infrastructure for getting a cyclic increasing ID number,
that is used for keeping track of each registered allocator per
RX-queue xdp_rxq_info.
V4: Per req of Jason Wang
- Use xdp_rxq_info_reg_mem_model() in all drivers implementing
XDP_REDIRECT, even-though it's not strictly necessary when
allocator==NULL for type MEM_TYPE_PAGE_SHARED (given it's zero).
V6: Per req of Alex Duyck
- Introduce rhashtable_lookup() call in later patch
V8: Address sparse should be static warnings (from kbuild test robot)
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now all the users of ndo_xdp_xmit have been converted to use xdp_return_frame.
This enable a different memory model, thus activating another code path
in the xdp_return_frame API.
V2: Fixed issues pointed out by Tariq.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Also convert driver i40e, which very recently got XDP_REDIRECT support
in commit d9314c474d ("i40e: add support for XDP_REDIRECT").
V7: This patch got added in V7 of this patchset.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The generic xdp_frame format, was inspired by the cpumap own internal
xdp_pkt format. It is now time to convert it over to the generic
xdp_frame format. The cpumap needs one extra field dev_rx.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The virtio_net driver assumes XDP frames are always released based on
page refcnt (via put_page). Thus, is only queues the XDP data pointer
address and uses virt_to_head_page() to retrieve struct page.
Use the XDP return API to get away from such assumptions. Instead
queue an xdp_frame, which allow us to use the xdp_return_frame API,
when releasing the frame.
V8: Avoid endianness issues (found by kbuild test robot)
V9: Change __virtnet_xdp_xmit from bool to int return value (found by Dan Carpenter)
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tuntap driver invented it's own driver specific way of queuing
XDP packets, by storing the xdp_buff information in the top of
the XDP frame data.
Convert it over to use the more generic xdp_frame structure. The
main problem with the in-driver method is that the xdp_rxq_info pointer
cannot be trused/used when dequeueing the frame.
V3: Remove check based on feedback from Jason
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is needed to convert drivers tuntap and virtio_net.
This is a generalization of what is done inside cpumap, which will be
converted later.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is done to prepare for the next patch, and it is also
nice to move this XDP related struct out of filter.h.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend struct ixgbe_tx_buffer to store the xdp_mem_info.
Notice that this could be optimized further by putting this into
a union in the struct ixgbe_tx_buffer, but this patchset
works towards removing this again. Thus, this is not done.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce an xdp_return_frame API, and convert over cpumap as
the first user, given it have queued XDP frame structure to leverage.
V3: Cleanup and remove C99 style comments, pointed out by Alex Duyck.
V6: Remove comment that id will be added later (Req by Alex Duyck)
V8: Rename enum mem_type to xdp_mem_type (found by kbuild test robot)
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This implements basic XDP redirect support in mlx5 driver.
Notice that the ndo_xdp_xmit() is NOT implemented, because that API
need some changes that this patchset is working towards.
The main purpose of this patch is have different drivers doing
XDP_REDIRECT to show how different memory models behave in a cross
driver world.
Update(pre-RFCv2 Tariq): Need to DMA unmap page before xdp_do_redirect,
as the return API does not exist yet to to keep this mapped.
Update(pre-RFCv3 Saeed): Don't mix XDP_TX and XDP_REDIRECT flushing,
introduce xdpsq.db.redirect_flush boolian.
V9: Adjust for commit 121e892754 ("net/mlx5e: Refactor RQ XDP_TX indication")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. Added red_drops stats. Inbound packets dropped by RED, buffer exhaustion
2. Included fcs_err, jabber_err, l2_err and frame_err errors under
rx_errors
3. Included fifo_err, dmac_drop, red_drops, fw_err_pko, fw_err_link and
fw_err_drop under rx_dropped
4. Included max_collision_fail, max_deferral_fail, total_collisions,
fw_err_pko, fw_err_link, fw_err_drop and fw_err_pki under tx_dropped
5. Counting dma mapping errors
6. Added some firmware stats description and removed for some
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Acked-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This tracepoint was replaced by inet_sock_set_state in 563e0bb and not
used anywhere in the kernel anymore. Remove it.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit says:
====================
PCI: add two more values for PCIe Max_Read_Request_Size and initially use them in r8169 network driver
In r8169 network driver I stumbled across a magic number translating
to PCI MRRS size 4K. The PCI core is still missing constants for
values 2K and 4K (as defined in PCI standard).
So let's add these two constants and use the 4K constant in r8169.
Second patch depends on the first one, therefore both patches
preferrably should go through either PCI or netdev tree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace magic number "0x5 << MAX_READ_REQUEST_SHIFT" with the
appropriate constant as defined in PCI core.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds missing values for the max read request size.
E.g. network driver r8169 uses a value of 4K.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu says:
====================
net: stmmac: Stop using hard-coded callbacks
This a starting point for a cleanup and re-organization of stmmac.
In this series we stop using hard-coded callbacks along the code and use
instead helpers which are defined in a single place ("hwif.h").
This brings several advantages:
1) Less typing :)
2) Guaranteed function pointer check
3) More flexibility
By 2) we stop using the repeated pattern of:
if (priv->hw->mac->some_func)
priv->hw->mac->some_func(...)
I didn't check but I expect the final .ko will be bigger with this series
because *all* of function pointers are checked.
Anyway, I hope this can make the code more readable and more flexible now.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch stmmac_mode_ops to generic Hardware Interface Helpers instead of
using hard-coded callbacks. This makes the code more readable and more
flexible.
No functional change.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch stmmac_hwtimestamp to generic Hardware Interface Helpers instead
of using hard-coded callbacks. This makes the code more readable and
more flexible.
No functional change.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch stmmac_ops to generic Hardware Interface Helpers instead of using
hard-coded callbacks. This makes the code more readable and more
flexible.
No functional change.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch stmmac_dma_ops to generic Hardware Interface Helpers instead of
using hard-coded callbacks. This makes the code more readable and more
flexible.
No functional change.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch stmmac_desc_ops to generic Hardware Interface Helpers instead of
using hard-coded callbacks. This makes the code more readable and more
flexible.
No functional change.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
tcp: add zero copy receive
This patch series add mmap() support to TCP sockets for RX zero copy.
While tcp_mmap() patch itself is quite small (~100 LOC), optimal support
for asynchronous mmap() required better SO_RCVLOWAT behavior, and a
test program to demonstrate how mmap() on TCP sockets can be used.
Note that mmap() (and associated munmap()) calls are adding more
pressure on per-process VM semaphore, so might not show benefit
for processus with high number of threads.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a reference program showing how mmap() can be used
on TCP flows to implement receive zero copy.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some networks can make sure TCP payload can exactly fit 4KB pages,
with well chosen MSS/MTU and architectures.
Implement mmap() system call so that applications can avoid
copying data without complex splice() games.
Note that a successful mmap( X bytes) on TCP socket is consuming
bytes, as if recvmsg() has been done. (tp->copied += X)
Only PROT_READ mappings are accepted, as skb page frags
are fundamentally shared and read only.
If tcp_mmap() finds data that is not a full page, or a patch of
urgent data, -EINVAL is returned, no bytes are consumed.
Application must fallback to recvmsg() to read the problematic sequence.
mmap() wont block, regardless of socket being in blocking or
non-blocking mode. If not enough bytes are in receive queue,
mmap() would return -EAGAIN, or -EIO if socket is in a state
where no other bytes can be added into receive queue.
An application might use SO_RCVLOWAT, poll() and/or ioctl( FIONREAD)
to efficiently use mmap()
On the sender side, MSG_EOR might help to clearly separate unaligned
headers and 4K-aligned chunks if necessary.
Tested:
mlx4 (cx-3) 40Gbit NIC, with tcp_mmap program provided in following patch.
MTU set to 4168 (4096 TCP payload, 40 bytes IPv6 header, 32 bytes TCP header)
Without mmap() (tcp_mmap -s)
received 32768 MB (0 % mmap'ed) in 8.13342 s, 33.7961 Gbit,
cpu usage user:0.034 sys:3.778, 116.333 usec per MB, 63062 c-switches
received 32768 MB (0 % mmap'ed) in 8.14501 s, 33.748 Gbit,
cpu usage user:0.029 sys:3.997, 122.864 usec per MB, 61903 c-switches
received 32768 MB (0 % mmap'ed) in 8.11723 s, 33.8635 Gbit,
cpu usage user:0.048 sys:3.964, 122.437 usec per MB, 62983 c-switches
received 32768 MB (0 % mmap'ed) in 8.39189 s, 32.7552 Gbit,
cpu usage user:0.038 sys:4.181, 128.754 usec per MB, 55834 c-switches
With mmap() on receiver (tcp_mmap -s -z)
received 32768 MB (100 % mmap'ed) in 8.03083 s, 34.2278 Gbit,
cpu usage user:0.024 sys:1.466, 45.4712 usec per MB, 65479 c-switches
received 32768 MB (100 % mmap'ed) in 7.98805 s, 34.4111 Gbit,
cpu usage user:0.026 sys:1.401, 43.5486 usec per MB, 65447 c-switches
received 32768 MB (100 % mmap'ed) in 7.98377 s, 34.4296 Gbit,
cpu usage user:0.028 sys:1.452, 45.166 usec per MB, 65496 c-switches
received 32768 MB (99.9969 % mmap'ed) in 8.01838 s, 34.281 Gbit,
cpu usage user:0.02 sys:1.446, 44.7388 usec per MB, 65505 c-switches
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SO_RCVLOWAT is properly handled in tcp_poll(), so that POLLIN is only
generated when enough bytes are available in receive queue, after
David change (commit c7004482e8 "tcp: Respect SO_RCVLOWAT in tcp_poll().")
But TCP still calls sk->sk_data_ready() for each chunk added in receive
queue, meaning thread is awaken, and goes back to sleep shortly after.
Tested:
tcp_mmap test program, receiving 32768 MB of data with SO_RCVLOWAT set to 512KB
-> Should get ~2 wakeups (c-switches) per MB, regardless of how many
(tiny or big) packets were received.
High speed (mostly full size GRO packets)
received 32768 MB (100 % mmap'ed) in 8.03112 s, 34.2266 Gbit,
cpu usage user:0.037 sys:1.404, 43.9758 usec per MB, 65497 c-switches
received 32768 MB (99.9954 % mmap'ed) in 7.98453 s, 34.4263 Gbit,
cpu usage user:0.03 sys:1.422, 44.3115 usec per MB, 65485 c-switches
Low speed (sender is ratelimited and sends 1-MSS at a time, so GRO is not helping)
received 22474.5 MB (100 % mmap'ed) in 6015.35 s, 0.0313414 Gbit,
cpu usage user:0.05 sys:1.586, 72.7952 usec per MB, 44950 c-switches
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We should not delay acks if there are not enough bytes
in receive queue to satisfy SO_RCVLOWAT.
Since [E]POLLIN event is not going to be generated, there is little
hope for a delayed ack to be useful.
In fact, delaying ACK prevents sender from completing
the transfer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Applications might use SO_RCVLOWAT on TCP socket hoping to receive
one [E]POLLIN event only when a given amount of bytes are ready in socket
receive queue.
Problem is that receive autotuning is not aware of this constraint,
meaning sk_rcvbuf might be too small to allow all bytes to be stored.
Add a new (struct proto_ops)->set_rcvlowat method so that a protocol
can override the default setsockopt(SO_RCVLOWAT) behavior.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
