Commit Graph

2264 Commits

Author SHA1 Message Date
Jan Kara
9b025eb3a8 xfs: Fix missing xfs_iunlock() on error recovery path in xfs_readlink()
Commit b52a360b forgot to call xfs_iunlock() when it detected corrupted
symplink and bailed out. Fix it by jumping to 'out' instead of doing return.

CC: stable@kernel.org
CC: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Alex Elder <elder@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-25 11:01:31 -06:00
Christoph Hellwig
d060646436 xfs: cleanup xfs_file_aio_write
With all the size field updates out of the way xfs_file_aio_write can
be further simplified by pushing all iolock handling into
xfs_file_dio_aio_write and xfs_file_buffered_aio_write and using
the generic generic_write_sync helper for synchronous writes.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-17 15:12:33 -06:00
Christoph Hellwig
5bf1f26227 xfs: always return with the iolock held from xfs_file_aio_write_checks
While xfs_iunlock is fine with 0 lockflags the calling conventions are much
cleaner if xfs_file_aio_write_checks never returns without the iolock held.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-17 15:11:07 -06:00
Christoph Hellwig
2813d682e8 xfs: remove the i_new_size field in struct xfs_inode
Now that we use the VFS i_size field throughout XFS there is no need for the
i_new_size field any more given that the VFS i_size field gets updated
in ->write_end before unlocking the page, and thus is always uptodate when
writeback could see a page.  Removing i_new_size also has the advantage that
we will never have to trim back di_size during a failed buffered write,
given that it never gets updated past i_size.

Note that currently the generic direct I/O code only updates i_size after
calling our end_io handler, which requires a small workaround to make
sure di_size actually makes it to disk.  I hope to fix this properly in
the generic code.

A downside is that we lose the support for parallel non-overlapping O_DIRECT
appending writes that recently was added.  I don't think keeping the complex
and fragile i_new_size infrastructure for this is a good tradeoff - if we
really care about parallel appending writers we should investigate turning
the iolock into a range lock, which would also allow for parallel
non-overlapping buffered writers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-17 15:10:19 -06:00
Christoph Hellwig
ce7ae151dd xfs: remove the i_size field in struct xfs_inode
There is no fundamental need to keep an in-memory inode size copy in the XFS
inode.  We already have the on-disk value in the dinode, and the separate
in-memory copy that we need for regular files only in the XFS inode.

Remove the xfs_inode i_size field and change the XFS_ISIZE macro to use the
VFS inode i_size field for regular files.  Switch code that was directly
accessing the i_size field in the xfs_inode to XFS_ISIZE, or in cases where
we are limited to regular files direct access of the VFS inode i_size field.

This also allows dropping some fairly complicated code in the write path
which dealt with keeping the xfs_inode i_size uptodate with the VFS i_size
that is getting updated inside ->write_end.

Note that we do not bother resetting the VFS i_size when truncating a file
that gets freed to zero as there is no point in doing so because the VFS inode
is no longer in use at this point.  Just relax the assert in xfs_ifree to
only check the on-disk size instead.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-17 15:08:53 -06:00
Christoph Hellwig
f392e6319a xfs: replace i_pin_wait with a bit waitqueue
Replace i_pin_wait, which is only used during synchronous inode flushing
with a bit waitqueue.  This trades off a much smaller inode against
slightly slower wakeup performance, and saves 12 (32-bit) or 20 (64-bit)
bytes in the XFS inode.

Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-17 15:07:54 -06:00
Christoph Hellwig
474fce0675 xfs: replace i_flock with a sleeping bitlock
We almost never block on i_flock, the exception is synchronous inode
flushing.  Instead of bloating the inode with a 16/24-byte completion
that we abuse as a semaphore just implement it as a bitlock that uses
a bit waitqueue for the rare sleeping path.  This primarily is a
tradeoff between a much smaller inode and a faster non-blocking
path vs faster wakeups, and we are much better off with the former.

A small downside is that we will lose lockdep checking for i_flock, but
given that it's always taken inside the ilock that should be acceptable.

Note that for example the inode writeback locking is implemented in a
very similar way.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-17 15:06:45 -06:00
Christoph Hellwig
49e4c70e52 xfs: make i_flags an unsigned long
To be used for bit wakeup i_flags needs to be an unsigned long or we'll
run into trouble on big endian systems.  Because of the 1-byte i_update
field right after it this actually causes a fairly large size increase
on its own (4 or 8 bytes), but that increase will be more than offset
by the next two patches.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-17 15:03:50 -06:00
Christoph Hellwig
8096b1ebb5 xfs: remove the if_ext_max field in struct xfs_ifork
We spent a lot of effort to maintain this field, but it always equals to the
fork size divided by the constant size of an extent.  The prime use of it is
to assert that the two stay in sync.  Just divide the fork size by the extent
size in the few places that we actually use it and remove the overhead
of maintaining it.  Also introduce a few helpers to consolidate the places
where we actually care about the value.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-17 15:02:28 -06:00
Christoph Hellwig
3d2b3129c2 xfs: remove the unused dm_attrs structure
.. and the just as dead bhv_desc forward declaration while we're at it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-13 12:11:46 -06:00
Christoph Hellwig
bf322d983e xfs: cleanup xfs_iomap_eof_align_last_fsb
Replace the nasty if, else if, elseif condition with more natural C flow
that expressed the logic we want here better.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-13 12:11:46 -06:00
Christoph Hellwig
673e8e597c xfs: remove xfs_itruncate_data
This wrapper isn't overly useful, not to say rather confusing.

Around the call to xfs_itruncate_extents it does:

 - add tracing
 - add a few asserts in debug builds
 - conditionally update the inode size in two places
 - log the inode

Both the tracing and the inode logging can be moved to xfs_itruncate_extents
as they are useful for the attribute fork as well - in fact the attr code
already does an equivalent xfs_trans_log_inode call just after calling
xfs_itruncate_extents.  The conditional size updates are a mess, and there
was no reason to do them in two places anyway, as the first one was
conditional on the inode having extents - but without extents we
xfs_itruncate_extents would be a no-op and the placement wouldn't matter
anyway.  Instead move the size assignments and the asserts that make sense
to the callers that want it.

As a side effect of this clean up xfs_setattr_size by introducing variables
for the old and new inode size, and moving the size updates into a common
place.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-13 12:11:45 -06:00
Linus Torvalds
993ecff81a Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: fix endian conversion issue in discard code
2012-01-09 12:50:15 -08:00
Linus Torvalds
98793265b4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
  Kconfig: acpi: Fix typo in comment.
  misc latin1 to utf8 conversions
  devres: Fix a typo in devm_kfree comment
  btrfs: free-space-cache.c: remove extra semicolon.
  fat: Spelling s/obsolate/obsolete/g
  SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
  tools/power turbostat: update fields in manpage
  mac80211: drop spelling fix
  types.h: fix comment spelling for 'architectures'
  typo fixes: aera -> area, exntension -> extension
  devices.txt: Fix typo of 'VMware'.
  sis900: Fix enum typo 'sis900_rx_bufer_status'
  decompress_bunzip2: remove invalid vi modeline
  treewide: Fix comment and string typo 'bufer'
  hyper-v: Update MAINTAINERS
  treewide: Fix typos in various parts of the kernel, and fix some comments.
  clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
  gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
  leds: Kconfig: Fix typo 'D2NET_V2'
  sound: Kconfig: drop unknown symbol ARCH_CLPS7500
  ...

Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)
2012-01-08 13:21:22 -08:00
Linus Torvalds
eb59c505f8 Merge branch 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
  PM / Hibernate: Implement compat_ioctl for /dev/snapshot
  PM / Freezer: fix return value of freezable_schedule_timeout_killable()
  PM / shmobile: Allow the A4R domain to be turned off at run time
  PM / input / touchscreen: Make st1232 use device PM QoS constraints
  PM / QoS: Introduce dev_pm_qos_add_ancestor_request()
  PM / shmobile: Remove the stay_on flag from SH7372's PM domains
  PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume
  PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode
  PM: Drop generic_subsys_pm_ops
  PM / Sleep: Remove forward-only callbacks from AMBA bus type
  PM / Sleep: Remove forward-only callbacks from platform bus type
  PM: Run the driver callback directly if the subsystem one is not there
  PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
  PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.
  PM / Sleep: Merge internal functions in generic_ops.c
  PM / Sleep: Simplify generic system suspend callbacks
  PM / Hibernate: Remove deprecated hibernation snapshot ioctls
  PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
  ARM: S3C64XX: Implement basic power domain support
  PM / shmobile: Use common always on power domain governor
  ...

Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused
XBT_FORCE_SLEEP bit
2012-01-08 13:10:57 -08:00
Linus Torvalds
29ad0de279 Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (22 commits)
  xfs: mark the xfssyncd workqueue as non-reentrant
  xfs: simplify xfs_qm_detach_gdquots
  xfs: fix acl count validation in xfs_acl_from_disk()
  xfs: remove unused XBT_FORCE_SLEEP bit
  xfs: remove XFS_QMOPT_DQSUSER
  xfs: kill xfs_qm_idtodq
  xfs: merge xfs_qm_dqinit_core into the only caller
  xfs: add a xfs_dqhold helper
  xfs: simplify xfs_qm_dqattach_grouphint
  xfs: nest qm_dqfrlist_lock inside the dquot qlock
  xfs: flatten the dquot lock ordering
  xfs: implement lazy removal for the dquot freelist
  xfs: remove XFS_DQ_INACTIVE
  xfs: cleanup xfs_qm_dqlookup
  xfs: cleanup dquot locking helpers
  xfs: remove the sync_mode argument to xfs_qm_dqflush_all
  xfs: remove xfs_qm_sync
  xfs: make sure to really flush all dquots in xfs_qm_quotacheck
  xfs: untangle SYNC_WAIT and SYNC_TRYLOCK meanings for xfs_qm_dqflush
  xfs: remove the lid_size field in struct log_item_desc
  ...

Fix up trivial conflict in fs/xfs/xfs_sync.c
2012-01-08 13:05:29 -08:00
Al Viro
34c80b1d93 vfs: switch ->show_options() to struct dentry *
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-06 23:19:54 -05:00
Al Viro
576b1d67ce xfs: propagate umode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:55:00 -05:00
Al Viro
1a67aafb5f switch ->mknod() to umode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:54 -05:00
Al Viro
4acdaf27eb switch ->create() to umode_t
vfs_create() ignores everything outside of 16bit subset of its
mode argument; switching it to umode_t is obviously equivalent
and it's the only caller of the method

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:53 -05:00
Al Viro
18bb1db3e7 switch vfs_mkdir() and ->mkdir() to umode_t
vfs_mkdir() gets int, but immediately drops everything that might not
fit into umode_t and that's the only caller of ->mkdir()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:53 -05:00
Al Viro
6b520e0565 vfs: fix the stupidity with i_dentry in inode destructors
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else.  Not to mention the removal of
boilerplate code from ->destroy_inode() instances...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:40 -05:00
Al Viro
2a79f17e4a vfs: mnt_drop_write_file()
new helper (wrapper around mnt_drop_write()) to be used in pair with
mnt_want_write_file().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:40 -05:00
Al Viro
a561be7100 switch a bunch of places to mnt_want_write_file()
it's both faster (in case when file has been opened for write) and cleaner.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:35 -05:00
Dave Chinner
b1c770c273 xfs: fix endian conversion issue in discard code
When finding the longest extent in an AG, we read the value directly
out of the AGF buffer without endian conversion. This will give an
incorrect length, resulting in FITRIM operations potentially not
trimming everything that it should.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-03 11:39:55 -06:00
Christoph Hellwig
be4f1ac828 xfs: log all dirty inodes in xfs_fs_sync_fs
Since Linux 2.6.36 the writeback code has introduces various measures for
live lock prevention during sync().  Unfortunately some of these are
actively harmful for the XFS model, where the inode gets marked dirty for
metadata from the data I/O handler.

The older_than_this checks that are now more strictly enforced since

    writeback: avoid livelocking WB_SYNC_ALL writeback

by only calling into __writeback_inodes_sb and thus only sampling the
current cut off time once.  But on a slow enough devices the previous
asynchronous sync pass might not have fully completed yet, and thus XFS
might mark metadata dirty only after that sampling of the cut off time for
the blocking pass already happened.  I have not myself reproduced this
myself on a real system, but by introducing artificial delay into the
XFS I/O completion workqueues it can be reproduced easily.

Fix this by iterating over all XFS inodes in ->sync_fs and log all that
are dirty.  This might log inode that only got redirtied after the
previous pass, but given how cheap delayed logging of inodes is it
isn't a major concern for performance.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-23 16:41:47 -06:00
Christoph Hellwig
0b8fd3033c xfs: log the inode in ->write_inode calls for kupdate
If the writeback code writes back an inode because it has expired we currently
use the non-blockin ->write_inode path.  This means any inode that is pinned
is skipped.  With delayed logging and a workload that has very little log
traffic otherwise it is very likely that an inode that gets constantly
written to is always pinned, and thus we keep refusing to write it.  The VM
writeback code at that point redirties it and doesn't try to write it again
for another 30 seconds.  This means under certain scenarious time based
metadata writeback never happens.

Fix this by calling into xfs_log_inode for kupdate in addition to data
integrity syncs, and thus transfer the inode to the log ASAP.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-23 16:41:47 -06:00
Rafael J. Wysocki
b00f4dc5ff Merge branch 'master' into pm-sleep
* master: (848 commits)
  SELinux: Fix RCU deref check warning in sel_netport_insert()
  binary_sysctl(): fix memory leak
  mm/vmalloc.c: remove static declaration of va from __get_vm_area_node
  ipmi_watchdog: restore settings when BMC reset
  oom: fix integer overflow of points in oom_badness
  memcg: keep root group unchanged if creation fails
  nilfs2: potential integer overflow in nilfs_ioctl_clean_segments()
  nilfs2: unbreak compat ioctl
  cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask
  evm: prevent racing during tfm allocation
  evm: key must be set once during initialization
  mmc: vub300: fix type of firmware_rom_wait_states module parameter
  Revert "mmc: enable runtime PM by default"
  mmc: sdhci: remove "state" argument from sdhci_suspend_host
  x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT
  IB/qib: Correct sense on freectxts increment and decrement
  RDMA/cma: Verify private data length
  cgroups: fix a css_set not found bug in cgroup_attach_proc
  oprofile: Fix uninitialized memory access when writing to writing to oprofilefs
  Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel"
  ...

Conflicts:
	kernel/cgroup_freezer.c
2011-12-21 21:59:45 +01:00
Christoph Hellwig
40d344ec5e xfs: mark the xfssyncd workqueue as non-reentrant
On a system with lots of memory pressure that is stuck on synchronous inode
reclaim the workqueue code will run one instance of the inode reclaim work
item on every CPU. which is not what we want.  Make sure to mark the
xfssyncd workqueue as non-reentrant to make sure there only is one instace
of each running globally.  Also stop using special paramater for the
workqueue; now that we guarantee each fs has only running one of each works
at a time there is no need to artificially lower max_active and compensate
for that by setting the WQ_CPU_INTENSIVE flag.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-19 22:17:01 -06:00
Christoph Hellwig
28fb588c9b xfs: simplify xfs_qm_detach_gdquots
There is no reason to drop qi_dqlist_lock around calls to xfs_qm_dqrele
because the free list lock now nests inside qi_dqlist_lock and the
dquot lock.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-16 15:33:30 -06:00
Xi Wang
093019cf1b xfs: fix acl count validation in xfs_acl_from_disk()
Commit fa8b18ed didn't prevent the integer overflow and possible
memory corruption.  "count" can go negative and bypass the check.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-16 15:17:42 -06:00
Eric Sandeen
687d1c5e8e xfs: remove unused XBT_FORCE_SLEEP bit
XBT_FORCE_SLEEP is no longer ever tested; it is only set
and cleared.  Remove it.

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-16 15:12:33 -06:00
Christoph Hellwig
7ae4440723 xfs: remove XFS_QMOPT_DQSUSER
Just read the id 0 dquot from disk directly in xfs_qm_init_quotainfo instead
of going through dqget and requiring a special flag to not add the dquot to
any lists.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-15 14:38:30 -06:00
Christoph Hellwig
97e7ade506 xfs: kill xfs_qm_idtodq
This function doesn't help the code flow, so merge the dquot allocation and
transaction handling into xfs_qm_dqread.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-15 14:37:32 -06:00
Christoph Hellwig
49d35a5cf1 xfs: merge xfs_qm_dqinit_core into the only caller
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-15 14:37:32 -06:00
Christoph Hellwig
78e55892d6 xfs: add a xfs_dqhold helper
Factor the common pattern of:

	xfs_dqlock(dqp);
	XFS_DQHOLD(dqp);
	xfs_dqunlock(dqp);

into a new helper, and remove XFS_DQHOLD now that only one other caller
is left.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-15 14:37:32 -06:00
Christoph Hellwig
ab680bb739 xfs: simplify xfs_qm_dqattach_grouphint
No need to play games with the qlock now that the freelist lock nests inside
it.  Also clean up various outdated comments.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-15 10:04:31 -06:00
Christoph Hellwig
bf72de3194 xfs: nest qm_dqfrlist_lock inside the dquot qlock
Allow xfs_qm_dqput to work without trylock loops by nesting the freelist lock
inside the dquot qlock.  In turn that requires trylocks in the reclaim path
instead, but given it's a classic tradeoff between fast and slow path, and
we follow the model of the inode and dentry caches.

Document our new lock order now that it has settled.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-14 21:15:42 -06:00
Christoph Hellwig
92678554ab xfs: flatten the dquot lock ordering
Introduce a new XFS_DQ_FREEING flag that tells lookup and mplist walks
to skip a dquot that is beeing freed, and use this avoid the trylock
on the hash and mplist locks in xfs_qm_dqreclaim_one.  Also simplify
xfs_dqpurge by moving the inodes to a dispose list after marking them
XFS_DQ_FREEING and avoid the locker ordering constraints.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-14 16:32:21 -06:00
Christoph Hellwig
be7ffc38a8 xfs: implement lazy removal for the dquot freelist
Do not remove dquots from the freelist when we grab a reference to them in
xfs_qm_dqlookup, but leave them on the freelist util scanning notices that
they have a reference.  This speeds up the lookup fastpath, and greatly
simplifies the lock ordering constraints.  Note that the same scheme is
used by the VFS inode and dentry caches.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-13 16:46:28 -06:00
Christoph Hellwig
80a376bfb7 xfs: remove XFS_DQ_INACTIVE
Free dquots when purging them during umount instead of keeping them around
on the freelist in a degraded state.  The out of order locking in
xfs_qm_dqpurge will be removed again later in this series.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-13 14:55:54 -06:00
Christoph Hellwig
497507b9ee xfs: cleanup xfs_qm_dqlookup
Rearrange the code to avoid the conditional locking around the flist_locked
variable.  This means we lose a (rather pointless) assert, and hold the
freelist lock a bit longer for one corner case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-13 11:43:35 -06:00
Christoph Hellwig
800b484ec0 xfs: cleanup dquot locking helpers
Mark the trivial lock wrappers as inline, and make the naming consistent
for all of them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-12 17:28:20 -06:00
Christoph Hellwig
a7ef9bd79f xfs: remove the sync_mode argument to xfs_qm_dqflush_all
It always is zero, and removing it will make future changes easier.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-12 16:46:20 -06:00
Christoph Hellwig
34625c661b xfs: remove xfs_qm_sync
Now that we can't have any dirty dquots around that aren't in the AIL we
can get rid of the explicit dquot syncing from xfssyncd and xfs_fs_sync_fs
and instead rely on AIL pushing to write out any quota updates.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-12 16:41:44 -06:00
Christoph Hellwig
f2fba558d3 xfs: make sure to really flush all dquots in xfs_qm_quotacheck
Make sure we do not skip any dquots when flushing them out after a
quotacheck to make sure that we will never have any dirty dquots on a
live filesystem.  At this point no dquot should be pinnable, but lets
be pedantic about it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-12 16:39:22 -06:00
Christoph Hellwig
fdedf28b94 xfs: untangle SYNC_WAIT and SYNC_TRYLOCK meanings for xfs_qm_dqflush
Only skip pinned dquots if SYNC_TRYLOCK is specified, and adjust the callers
to keep the behaviour unchanged.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-12 16:31:01 -06:00
Christoph Hellwig
b39342134a xfs: remove the lid_size field in struct log_item_desc
Outside the now removed nodelaylog code this field is only used for
asserts and can be safely removed now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-08 13:53:30 -06:00
Christoph Hellwig
0244b9603d xfs: cleanup the transaction commit path a bit
Now that the nodelaylog mode is gone we can simplify the transaction commit
path a bit by removing the xfs_trans_commit_cil routine.  Restoring the
process flags is merged into xfs_trans_commit which already does it for
the error path, and allocating the log vectors is merged into
xlog_cil_format_items, which already fills them with data, thus avoiding
one loop over all log items.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-08 13:53:30 -06:00
Christoph Hellwig
93b8a5854f xfs: remove the deprecated nodelaylog option
The delaylog mode has been the default for a long time, and the nodelaylog
option has been scheduled for removal in Linux 3.3.  Remove it and code
only used by it now that we have opened the 3.3 window.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-08 12:30:32 -06:00