forked from Minki/linux
8dd33bcb70
4385 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Thomas Gleixner
|
7edaeb6841 |
kernel/watchdog: Prevent false positives with turbo modes
The hardlockup detector on x86 uses a performance counter based on unhalted
CPU cycles and a periodic hrtimer. The hrtimer period is about 2/5 of the
performance counter period, so the hrtimer should fire 2-3 times before the
performance counter NMI fires. The NMI code checks whether the hrtimer
fired since the last invocation. If not, it assumess a hard lockup.
The calculation of those periods is based on the nominal CPU
frequency. Turbo modes increase the CPU clock frequency and therefore
shorten the period of the perf/NMI watchdog. With extreme Turbo-modes (3x
nominal frequency) the perf/NMI period is shorter than the hrtimer period
which leads to false positives.
A simple fix would be to shorten the hrtimer period, but that comes with
the side effect of more frequent hrtimer and softlockup thread wakeups,
which is not desired.
Implement a low pass filter, which checks the perf/NMI period against
kernel time. If the perf/NMI fires before 4/5 of the watchdog period has
elapsed then the event is ignored and postponed to the next perf/NMI.
That solves the problem and avoids the overhead of shorter hrtimer periods
and more frequent softlockup thread wakeups.
Fixes:
|
||
Akinobu Mita
|
9eeb52ae71 |
fault-inject: fix wrong should_fail() decision in task context
Commit |
||
Dan Carpenter
|
4e98ebe5f4 |
test_kmod: fix small memory leak on filesystem tests
The break was in the wrong place so file system tests don't work as intended, leaking memory at each test switch. [mcgrof@kernel.org: massaged commit subject, noted memory leak issue without the fix] Link: http://lkml.kernel.org/r/20170802211450.27928-6-mcgrof@kernel.org Fixes: 39258f448d71 ("kmod: add test driver to stress test the module loader") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reported-by: David Binderman <dcb314@hotmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michal Marek <mmarek@suse.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Dan Carpenter
|
9c56771316 |
test_kmod: fix the lock in register_test_dev_kmod()
We accidentally just drop the lock twice instead of taking it and then releasing it. This isn't a big issue unless you are adding more than one device to test on, and the kmod.sh doesn't do that yet, however this obviously is the correct thing to do. [mcgrof@kernel.org: massaged subject, explain what happens] Link: http://lkml.kernel.org/r/20170802211450.27928-5-mcgrof@kernel.org Fixes: 39258f448d71 ("kmod: add test driver to stress test the module loader") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: David Binderman <dcb314@hotmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michal Marek <mmarek@suse.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Luis R. Rodriguez
|
434b06ae23 |
test_kmod: fix bug which allows negative values on two config options
Parsing with kstrtol() enables values to be negative, and we failed to check for negative values when parsing with test_dev_config_update_uint_sync() or test_dev_config_update_uint_range(). test_dev_config_update_uint_range() has a minimum check though so an issue is not present there. test_dev_config_update_uint_sync() is only used for the number of threads to use (config_num_threads_store()), and indeed this would fail with an attempt for a large allocation. Although the issue is only present in practice with the first fix both by using kstrtoul() instead of kstrtol(). Link: http://lkml.kernel.org/r/20170802211450.27928-4-mcgrof@kernel.org Fixes: 39258f448d71 ("kmod: add test driver to stress test the module loader") Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: David Binderman <dcb314@hotmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michal Marek <mmarek@suse.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Colin Ian King
|
a4afe8cdec |
test_kmod: fix spelling mistake: "EMTPY" -> "EMPTY"
Trivial fix to spelling mistake in snprintf text [mcgrof@kernel.org: massaged commit message] Link: http://lkml.kernel.org/r/20170802211450.27928-3-mcgrof@kernel.org Fixes: 39258f448d71 ("kmod: add test driver to stress test the module loader") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Jessica Yu <jeyu@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Binderman <dcb314@hotmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
bc78d646e7 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Handle notifier registry failures properly in tun/tap driver, from
Tonghao Zhang.
2) Fix bpf verifier handling of subtraction bounds and add a testcase
for this, from Edward Cree.
3) Increase reset timeout in ftgmac100 driver, from Ben Herrenschmidt.
4) Fix use after free in prd_retire_rx_blk_timer_exired() in AF_PACKET,
from Cong Wang.
5) Fix SElinux regression due to recent UDP optimizations, from Paolo
Abeni.
6) We accidently increment IPSTATS_MIB_FRAGFAILS in the ipv6 code
paths, fix from Stefano Brivio.
7) Fix some mem leaks in dccp, from Xin Long.
8) Adjust MDIO_BUS kconfig deps to avoid build errors, from Arnd
Bergmann.
9) Mac address length check and buffer size fixes from Cong Wang.
10) Don't leak sockets in ipv6 udp early demux, from Paolo Abeni.
11) Fix return value when copy_from_user() fails in
bpf_prog_get_info_by_fd(), from Daniel Borkmann.
12) Handle PHY_HALTED properly in phy library state machine, from
Florian Fainelli.
13) Fix OOPS in fib_sync_down_dev(), from Ido Schimmel.
14) Fix truesize calculation in virtio_net which led to performance
regressions, from Michael S Tsirkin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
samples/bpf: fix bpf tunnel cleanup
udp6: fix jumbogram reception
ppp: Fix a scheduling-while-atomic bug in del_chan
Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config"
virtio_net: fix truesize for mergeable buffers
mv643xx_eth: fix of_irq_to_resource() error check
MAINTAINERS: Add more files to the PHY LIBRARY section
ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev()
net: phy: Correctly process PHY_HALTED in phy_stop_machine()
sunhme: fix up GREG_STAT and GREG_IMASK register offsets
bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_len
tcp: avoid bogus gcc-7 array-bounds warning
net: tc35815: fix spelling mistake: "Intterrupt" -> "Interrupt"
bpf: don't indicate success when copy_from_user fails
udp6: fix socket leak on early demux
net: thunderx: Fix BGX transmit stall due to underflow
Revert "vhost: cache used event for better performance"
team: use a larger struct for mac address
net: check dev->addr_len for dev_set_mac_address()
phy: bcm-ns-usb3: fix MDIO_BUS dependency
...
|
||
Phil Sutter
|
783692558a |
lib: test_rhashtable: Fix KASAN warning
I forgot one spot when introducing struct test_obj_val.
Fixes:
|
||
|
Phil Sutter
|
e859afe1ee |
lib: test_rhashtable: fix for large entry counts
During concurrent access testing, threadfunc() concatenated thread ID
and object index to create a unique key like so:
| tdata->objs[i].value = (tdata->id << 16) | i;
This breaks if a user passes an entries parameter of 64k or higher,
since 'i' might use more than 16 bits then. Effectively, this will lead
to duplicate keys in the table.
Fix the problem by introducing a struct holding object and thread ID and
using that as key instead of a single integer type field.
Fixes:
|
||
Christoph Hellwig
|
d9cf484165 |
uuid: fix incorrect uuid_equal conversion in test_uuid_test
Fixes:
|
||
|
Linus Torvalds
|
52f6c588c7 |
Add wait_for_random_bytes() and get_random_*_wait() functions so that
callers can more safely get random bytes if they can block until the
CRNG is initialized.
Also print a warning if get_random_*() is called before the CRNG is
initialized. By default, only one single-line warning will be printed
per boot. If CONFIG_WARN_ALL_UNSEEDED_RANDOM is defined, then a
warning will be printed for each function which tries to get random
bytes before the CRNG is initialized. This can get spammy for certain
architecture types, so it is not enabled by default.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAllqXNUACgkQ8vlZVpUN
gaPtAgf/aUbXZuWYsDQzslHsbzEWi+qz4QgL885/w4L00pEImTTp91Q06SDxWhtB
KPvGnZHS3IofxBh2DC+6AwN6dPMoWDCfYhhO6po3FSz0DiPRIQCTuvOb8fhKY1X7
rTdDq2xtDxPGxJ25bMJtlrgzH2XlXPpVyPUeoc9uh87zUK5aesXpUn9kBniRexoz
ume+M/cDzPKkwNQpbLq8vzhNjoWMVv0FeW2akVvrjkkWko8nZLZ0R/kIyKQlRPdG
LZDXcz0oTHpDS6+ufEo292ZuWm2IGer2YtwHsKyCAsyEWsUqBz2yurtkSj3mAVyC
hHafyS+5WNaGdgBmg0zJxxwn5qxxLg==
=ua7p
-----END PGP SIGNATURE-----
Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull random updates from Ted Ts'o:
"Add wait_for_random_bytes() and get_random_*_wait() functions so that
callers can more safely get random bytes if they can block until the
CRNG is initialized.
Also print a warning if get_random_*() is called before the CRNG is
initialized. By default, only one single-line warning will be printed
per boot. If CONFIG_WARN_ALL_UNSEEDED_RANDOM is defined, then a
warning will be printed for each function which tries to get random
bytes before the CRNG is initialized. This can get spammy for certain
architecture types, so it is not enabled by default"
* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: reorder READ_ONCE() in get_random_uXX
random: suppress spammy warnings about unseeded randomness
random: warn when kernel uses unseeded randomness
net/route: use get_random_int for random counter
net/neighbor: use get_random_u32 for 32-bit hash random
rhashtable: use get_random_u32 for hash_rnd
ceph: ensure RNG is seeded before using
iscsi: ensure RNG is seeded before use
cifs: use get_random_u32 for 32-bit lock random
random: add get_random_{bytes,u32,u64,int,long,once}_wait family
random: add wait_for_random_bytes() API
|
||
Theodore Ts'o
|
eecabf5674 |
random: suppress spammy warnings about unseeded randomness
Unfortunately, on some models of some architectures getting a fully seeded CRNG is extremely difficult, and so this can result in dmesg getting spammed for a surprisingly long time. This is really bad from a security perspective, and so architecture maintainers really need to do what they can to get the CRNG seeded sooner after the system is booted. However, users can't do anything actionble to address this, and spamming the kernel messages log will only just annoy people. For developers who want to work on improving this situation, CONFIG_WARN_UNSEEDED_RANDOM has been renamed to CONFIG_WARN_ALL_UNSEEDED_RANDOM. By default the kernel will always print the first use of unseeded randomness. This way, hopefully the security obsessed will be happy that there is _some_ indication when the kernel boots there may be a potential issue with that architecture or subarchitecture. To see all uses of unseeded randomness, developers can enable CONFIG_WARN_ALL_UNSEEDED_RANDOM. Signed-off-by: Theodore Ts'o <tytso@mit.edu> |
||
|
Luis R. Rodriguez
|
d9c6a72d6f |
kmod: add test driver to stress test the module loader
This adds a new stress test driver for kmod: the kernel module loader. The new stress test driver, test_kmod, is only enabled as a module right now. It should be possible to load this as built-in and load tests early (refer to the force_init_test module parameter), however since a lot of test can get a system out of memory fast we leave this disabled for now. Using a system with 1024 MiB of RAM can *easily* get your kernel OOM fast with this test driver. The test_kmod driver exposes API knobs for us to fine tune simple request_module() and get_fs_type() calls. Since these API calls only allow each one parameter a test driver for these is rather simple. Other factors that can help out test driver though are the number of calls we issue and knowing current limitations of each. This exposes configuration as much as possible through userspace to be able to build tests directly from userspace. Since it allows multiple misc devices its will eventually (once we add a knob to let us create new devices at will) also be possible to perform more tests in parallel, provided you have enough memory. We only enable tests we know work as of right now. Demo screenshots: # tools/testing/selftests/kmod/kmod.sh kmod_test_0001_driver: OK! - loading kmod test kmod_test_0001_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND kmod_test_0001_fs: OK! - loading kmod test kmod_test_0001_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL kmod_test_0002_driver: OK! - loading kmod test kmod_test_0002_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND kmod_test_0002_fs: OK! - loading kmod test kmod_test_0002_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL kmod_test_0003: OK! - loading kmod test kmod_test_0003: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0004: OK! - loading kmod test kmod_test_0004: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0005: OK! - loading kmod test kmod_test_0005: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0006: OK! - loading kmod test kmod_test_0006: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0005: OK! - loading kmod test kmod_test_0005: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0006: OK! - loading kmod test kmod_test_0006: OK! - Return value: 0 (SUCCESS), expected SUCCESS XXX: add test restult for 0007 Test completed You can also request for specific tests: # tools/testing/selftests/kmod/kmod.sh -t 0001 kmod_test_0001_driver: OK! - loading kmod test kmod_test_0001_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND kmod_test_0001_fs: OK! - loading kmod test kmod_test_0001_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL Test completed Lastly, the current available number of tests: # tools/testing/selftests/kmod/kmod.sh --help Usage: tools/testing/selftests/kmod/kmod.sh [ -t <4-number-digit> ] Valid tests: 0001-0009 0001 - Simple test - 1 thread for empty string 0002 - Simple test - 1 thread for modules/filesystems that do not exist 0003 - Simple test - 1 thread for get_fs_type() only 0004 - Simple test - 2 threads for get_fs_type() only 0005 - multithreaded tests with default setup - request_module() only 0006 - multithreaded tests with default setup - get_fs_type() only 0007 - multithreaded tests with default setup test request_module() and get_fs_type() 0008 - multithreaded - push kmod_concurrent over max_modprobes for request_module() 0009 - multithreaded - push kmod_concurrent over max_modprobes for get_fs_type() The following test cases currently fail, as such they are not currently enabled by default: # tools/testing/selftests/kmod/kmod.sh -t 0008 # tools/testing/selftests/kmod/kmod.sh -t 0009 To be sure to run them as intended please unload both of the modules: o test_module o xfs And ensure they are not loaded on your system prior to testing them. If you use these paritions for your rootfs you can change the default test driver used for get_fs_type() by exporting it into your environment. For example of other test defaults you can override refer to kmod.sh allow_user_defaults(). Behind the scenes this is how we fine tune at a test case prior to hitting a trigger to run it: cat /sys/devices/virtual/misc/test_kmod0/config echo -n "2" > /sys/devices/virtual/misc/test_kmod0/config_test_case echo -n "ext4" > /sys/devices/virtual/misc/test_kmod0/config_test_fs echo -n "80" > /sys/devices/virtual/misc/test_kmod0/config_num_threads cat /sys/devices/virtual/misc/test_kmod0/config echo -n "1" > /sys/devices/virtual/misc/test_kmod0/config_num_threads Finally to trigger: echo -n "1" > /sys/devices/virtual/misc/test_kmod0/trigger_config The kmod.sh script uses the above constructs to build different test cases. A bit of interpretation of the current failures follows, first two premises: a) When request_module() is used userspace figures out an optimized version of module order for us. Once it finds the modules it needs, as per depmod symbol dep map, it will finit_module() the respective modules which are needed for the original request_module() request. b) We have an optimization in place whereby if a kernel uses request_module() on a module already loaded we never bother userspace as the module already is loaded. This is all handled by kernel/kmod.c. A few things to consider to help identify root causes of issues: 0) kmod 19 has a broken heuristic for modules being assumed to be built-in to your kernel and will return 0 even though request_module() failed. Upgrade to a newer version of kmod. 1) A get_fs_type() call for "xfs" will request_module() for "fs-xfs", not for "xfs". The optimization in kernel described in b) fails to catch if we have a lot of consecutive get_fs_type() calls. The reason is the optimization in place does not look for aliases. This means two consecutive get_fs_type() calls will bump kmod_concurrent, whereas request_module() will not. This one explanation why test case 0009 fails at least once for get_fs_type(). 2) If a module fails to load --- for whatever reason (kmod_concurrent limit reached, file not yet present due to rootfs switch, out of memory) we have a period of time during which module request for the same name either with request_module() or get_fs_type() will *also* fail to load even if the file for the module is ready. This explains why *multiple* NULLs are possible on test 0009. 3) finit_module() consumes quite a bit of memory. 4) Filesystems typically also have more dependent modules than other modules, its important to note though that even though a get_fs_type() call does not incur additional kmod_concurrent bumps, since userspace loads dependencies it finds it needs via finit_module_fd(), it *will* take much more memory to load a module with a lot of dependencies. Because of 3) and 4) we will easily run into out of memory failures with certain tests. For instance test 0006 fails on qemu with 1024 MiB of RAM. It panics a box after reaping all userspace processes and still not having enough memory to reap. [arnd@arndb.de: add dependencies for test module] Link: http://lkml.kernel.org/r/20170630154834.3689272-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170628223155.26472-3-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Jessica Yu <jeyu@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Akinobu Mita
|
1203c8e6fb |
fault-inject: simplify access check for fail-nth
The fail-nth file is created with 0666 and the access is permitted if and only if the task is current. This file is owned by the currnet user. So we can create it with 0644 and allow the owner to write it. This enables to watch the status of task->fail_nth from another processes. [akinobu.mita@gmail.com: don't convert unsigned type value as signed int] Link: http://lkml.kernel.org/r/1492444483-9239-1-git-send-email-akinobu.mita@gmail.com [akinobu.mita@gmail.com: avoid unwanted data race to task->fail_nth] Link: http://lkml.kernel.org/r/1499962492-8931-1-git-send-email-akinobu.mita@gmail.com Link: http://lkml.kernel.org/r/1491490561-10485-5-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michael Ellerman
|
ffba19ccae |
lib/atomic64_test.c: add a test that atomic64_inc_not_zero() returns an int
atomic64_inc_not_zero() returns a "truth value" which in C is
traditionally an int. That means callers are likely to expect the
result will fit in an int.
If an implementation returns a "true" value which does not fit in an
int, then there's a possibility that callers will truncate it when they
store it in an int.
In fact this happened in practice, see commit
|
||
Nikolay Borisov
|
3e8f399da4 |
writeback: rework wb_[dec|inc]_stat family of functions
Currently the writeback statistics code uses a percpu counters to hold various statistics. Furthermore we have 2 families of functions - those which disable local irq and those which doesn't and whose names begin with double underscore. However, they both end up calling __add_wb_stats which in turn calls percpu_counter_add_batch which is already irq-safe. Exploiting this fact allows to eliminated the __wb_* functions since they don't add any further protection than we already have. Furthermore, refactor the wb_* function to call __add_wb_stat directly without the irq-disabling dance. This will likely result in better runtime of code which deals with modifying the stat counters. While at it also document why percpu_counter_add_batch is in fact preempt and irq-safe since at least 3 people got confused. Link: http://lkml.kernel.org/r/1498029937-27293-1-git-send-email-nborisov@suse.com Signed-off-by: Nikolay Borisov <nborisov@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Josef Bacik <jbacik@fb.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jeff Layton <jlayton@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Daniel Micay
|
6974f0c455 |
include/linux/string.h: add the option of fortified string.h functions
This adds support for compiling with a rough equivalent to the glibc _FORTIFY_SOURCE=1 feature, providing compile-time and runtime buffer overflow checks for string.h functions when the compiler determines the size of the source or destination buffer at compile-time. Unlike glibc, it covers buffer reads in addition to writes. GNU C __builtin_*_chk intrinsics are avoided because they would force a much more complex implementation. They aren't designed to detect read overflows and offer no real benefit when using an implementation based on inline checks. Inline checks don't add up to much code size and allow full use of the regular string intrinsics while avoiding the need for a bunch of _chk functions and per-arch assembly to avoid wrapper overhead. This detects various overflows at compile-time in various drivers and some non-x86 core kernel code. There will likely be issues caught in regular use at runtime too. Future improvements left out of initial implementation for simplicity, as it's all quite optional and can be done incrementally: * Some of the fortified string functions (strncpy, strcat), don't yet place a limit on reads from the source based on __builtin_object_size of the source buffer. * Extending coverage to more string functions like strlcat. * It should be possible to optionally use __builtin_object_size(x, 1) for some functions (C strings) to detect intra-object overflows (like glibc's _FORTIFY_SOURCE=2), but for now this takes the conservative approach to avoid likely compatibility issues. * The compile-time checks should be made available via a separate config option which can be enabled by default (or always enabled) once enough time has passed to get the issues it catches fixed. Kees said: "This is great to have. While it was out-of-tree code, it would have blocked at least CVE-2016-3858 from being exploitable (improper size argument to strlcpy()). I've sent a number of fixes for out-of-bounds-reads that this detected upstream already" [arnd@arndb.de: x86: fix fortified memcpy] Link: http://lkml.kernel.org/r/20170627150047.660360-1-arnd@arndb.de [keescook@chromium.org: avoid panic() in favor of BUG()] Link: http://lkml.kernel.org/r/20170626235122.GA25261@beast [keescook@chromium.org: move from -mm, add ARCH_HAS_FORTIFY_SOURCE, tweak Kconfig help] Link: http://lkml.kernel.org/r/20170526095404.20439-1-danielmicay@gmail.com Link: http://lkml.kernel.org/r/1497903987-21002-8-git-send-email-keescook@chromium.org Signed-off-by: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Daniel Axtens <dja@axtens.net> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Nicholas Piggin
|
05a4a95279 |
kernel/watchdog: split up config options
Split SOFTLOCKUP_DETECTOR from LOCKUP_DETECTOR, and split HARDLOCKUP_DETECTOR_PERF from HARDLOCKUP_DETECTOR. LOCKUP_DETECTOR implies the general boot, sysctl, and programming interfaces for the lockup detectors. An architecture that wants to use a hard lockup detector must define HAVE_HARDLOCKUP_DETECTOR_PERF or HAVE_HARDLOCKUP_DETECTOR_ARCH. Alternatively an arch can define HAVE_NMI_WATCHDOG, which provides the minimum arch_touch_nmi_watchdog, and it otherwise does its own thing and does not implement the LOCKUP_DETECTOR interfaces. sparc is unusual in that it has started to implement some of the interfaces, but not fully yet. It should probably be converted to a full HAVE_HARDLOCKUP_DETECTOR_ARCH. [npiggin@gmail.com: fix] Link: http://lkml.kernel.org/r/20170617223522.66c0ad88@roar.ozlabs.ibm.com Link: http://lkml.kernel.org/r/20170616065715.18390-4-npiggin@gmail.com Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Don Zickus <dzickus@redhat.com> Reviewed-by: Babu Moger <babu.moger@oracle.com> Tested-by: Babu Moger <babu.moger@oracle.com> [sparc] Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Dmitry Vyukov
|
e41d58185f |
fault-inject: support systematic fault injection
Add /proc/self/task/<current-tid>/fail-nth file that allows failing 0-th, 1-st, 2-nd and so on calls systematically. Excerpt from the added documentation: "Write to this file of integer N makes N-th call in the current task fail (N is 0-based). Read from this file returns a single char 'Y' or 'N' that says if the fault setup with a previous write to this file was injected or not, and disables the fault if it wasn't yet injected. Note that this file enables all types of faults (slab, futex, etc). This setting takes precedence over all other generic settings like probability, interval, times, etc. But per-capability settings (e.g. fail_futex/ignore-private) take precedence over it. This feature is intended for systematic testing of faults in a single system call. See an example below" Why add a new setting: 1. Existing settings are global rather than per-task. So parallel testing is not possible. 2. attr->interval is close but it depends on attr->count which is non reset to 0, so interval does not work as expected. 3. Trying to model this with existing settings requires manipulations of all of probability, interval, times, space, task-filter and unexposed count and per-task make-it-fail files. 4. Existing settings are per-failure-type, and the set of failure types is potentially expanding. 5. make-it-fail can't be changed by unprivileged user and aggressive stress testing better be done from an unprivileged user. Similarly, this would require opening the debugfs files to the unprivileged user, as he would need to reopen at least times file (not possible to pre-open before dropping privs). The proposed interface solves all of the above (see the example). We want to integrate this into syzkaller fuzzer. A prototype has found 10 bugs in kernel in first day of usage: https://groups.google.com/forum/#!searchin/syzkaller/%22FAULT_INJECTION%22%7Csort:relevance I've made the current interface work with all types of our sandboxes. For setuid the secret sauce was prctl(PR_SET_DUMPABLE, 1, 0, 0, 0) to make /proc entries non-root owned. So I am fine with the current version of the code. [akpm@linux-foundation.org: fix build] Link: http://lkml.kernel.org/r/20170328130128.101773-1-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Luis R. Rodriguez
|
7c43a657a4 |
test_sysctl: test against int proc_dointvec() array support
Add a few initial respective tests for an array: o Echoing values separated by spaces works o Echoing only first elements will set first elements o Confirm PAGE_SIZE limit still applies even if an array is used Link: http://lkml.kernel.org/r/20170630224431.17374-7-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Luis R. Rodriguez
|
2920fad3a5 |
test_sysctl: add simple proc_douintvec() case
Test against a simple proc_douintvec() case. While at it, add a test against UINT_MAX. Make sure UINT_MAX works, and UINT_MAX+1 will fail and that negative values are not accepted. Link: http://lkml.kernel.org/r/20170630224431.17374-6-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Luis R. Rodriguez
|
eb965eda1c |
test_sysctl: add simple proc_dointvec() case
Test against a simple proc_dointvec() case. While at it, add a test against INT_MAX. Make sure INT_MAX works, and INT_MAX+1 will fail. Also test negative values work. Link: http://lkml.kernel.org/r/20170630224431.17374-5-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Luis R. Rodriguez
|
9308f2f9e7 |
test_sysctl: add dedicated proc sysctl test driver
The existing tools/testing/selftests/sysctl/ tests include two test cases, but these use existing production kernel sysctl interfaces. We want to expand test coverage but we can't just be looking for random safe production values to poke at, that's just insane! Instead just dedicate a test driver for debugging purposes and port the existing scripts to use it. This will make it easier for further tests to be added. Subsequent patches will extend our test coverage for sysctl. The stress test driver uses a new license (GPL on Linux, copyleft-next outside of Linux). Linus was fine with this [0] and later due to Ted's and Alans's request ironed out an "or" language clause to use [1] which is already present upstream. [0] https://lkml.kernel.org/r/CA+55aFyhxcvD+q7tp+-yrSFDKfR0mOHgyEAe=f_94aKLsOu0Og@mail.gmail.com [1] https://lkml.kernel.org/r/1495234558.7848.122.camel@linux.intel.com Link: http://lkml.kernel.org/r/20170630224431.17374-2-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Sergey Senozhatsky
|
166a0f780a |
lib/bsearch.c: micro-optimize pivot position calculation
There is a slightly faster way (in terms of the number of instructions
being used) to calculate the position of a middle element, preserving
integer overflow safeness.
./scripts/bloat-o-meter lib/bsearch.o.old lib/bsearch.o.new
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-24 (-24)
function old new delta
bsearch 122 98 -24
TEST
INT array of size 100001, elements [0..100000]. gcc 7.1, Os, x86_64.
a) bsearch() of existing key "100001 - 2":
BASE
====
$ perf stat ./a.out
Performance counter stats for './a.out':
619.445196 task-clock:u (msec) # 0.999 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
133 page-faults:u # 0.215 K/sec
1,949,517,279 cycles:u # 3.147 GHz (83.06%)
181,017,938 stalled-cycles-frontend:u # 9.29% frontend cycles idle (83.05%)
82,959,265 stalled-cycles-backend:u # 4.26% backend cycles idle (67.02%)
4,355,706,383 instructions:u # 2.23 insn per cycle
# 0.04 stalled cycles per insn (83.54%)
1,051,539,242 branches:u # 1697.550 M/sec (83.54%)
15,263,381 branch-misses:u # 1.45% of all branches (83.43%)
0.620082548 seconds time elapsed
PATCHED
=======
$ perf stat ./a.out
Performance counter stats for './a.out':
475.097316 task-clock:u (msec) # 0.999 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
135 page-faults:u # 0.284 K/sec
1,487,467,717 cycles:u # 3.131 GHz (82.95%)
186,537,162 stalled-cycles-frontend:u # 12.54% frontend cycles idle (82.93%)
28,797,869 stalled-cycles-backend:u # 1.94% backend cycles idle (67.10%)
3,807,564,203 instructions:u # 2.56 insn per cycle
# 0.05 stalled cycles per insn (83.57%)
1,049,344,291 branches:u # 2208.693 M/sec (83.60%)
5,485 branch-misses:u # 0.00% of all branches (83.58%)
0.475760235 seconds time elapsed
b) bsearch() of un-existing key "100001 + 2":
BASE
====
$ perf stat ./a.out
Performance counter stats for './a.out':
499.244480 task-clock:u (msec) # 0.999 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
132 page-faults:u # 0.264 K/sec
1,571,194,855 cycles:u # 3.147 GHz (83.18%)
13,450,980 stalled-cycles-frontend:u # 0.86% frontend cycles idle (83.18%)
21,256,072 stalled-cycles-backend:u # 1.35% backend cycles idle (66.78%)
4,171,197,909 instructions:u # 2.65 insn per cycle
# 0.01 stalled cycles per insn (83.68%)
1,009,175,281 branches:u # 2021.405 M/sec (83.79%)
3,122 branch-misses:u # 0.00% of all branches (83.37%)
0.499871144 seconds time elapsed
PATCHED
=======
$ perf stat ./a.out
Performance counter stats for './a.out':
399.023499 task-clock:u (msec) # 0.998 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
134 page-faults:u # 0.336 K/sec
1,245,793,991 cycles:u # 3.122 GHz (83.39%)
11,529,273 stalled-cycles-frontend:u # 0.93% frontend cycles idle (83.46%)
12,116,311 stalled-cycles-backend:u # 0.97% backend cycles idle (66.92%)
3,679,710,005 instructions:u # 2.95 insn per cycle
# 0.00 stalled cycles per insn (83.47%)
1,009,792,625 branches:u # 2530.660 M/sec (83.46%)
2,590 branch-misses:u # 0.00% of all branches (83.12%)
0.399733539 seconds time elapsed
Link: http://lkml.kernel.org/r/20170607150457.5905-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Thomas Meyer
|
a94c33dd1f |
lib/extable.c: use bsearch() library function in search_extable()
[thomas@m3y3r.de: v3: fix arch specific implementations] Link: http://lkml.kernel.org/r/1497890858.12931.7.camel@m3y3r.de Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Michal Hocko
|
12e8fd6fd3 |
lib/rhashtable.c: use kvzalloc() in bucket_table_alloc() when possible
bucket_table_alloc() can be currently called with GFP_KERNEL or GFP_ATOMIC. For the former we basically have an open coded kvzalloc() while the later only uses kzalloc(). Let's simplify the code a bit by the dropping the open coded path and replace it with kvzalloc(). Link: http://lkml.kernel.org/r/20170531155145.17111-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Thomas Graf <tgraf@suug.ch> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Davidlohr Bueso
|
c46ecce431 |
lib/interval_tree_test.c: allow full tree search
... such that a user can specify visiting all the nodes in the tree (intersects with the world). This is a nice opposite from the very basic default query which is a single point. Link: http://lkml.kernel.org/r/20170518174936.20265-5-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Davidlohr Bueso
|
a8ec14d4f6 |
lib/interval_tree_test.c: allow users to limit scope of endpoint
Add a 'max_endpoint' parameter such that users may easily limit the size of the intervals that are randomly generated. Link: http://lkml.kernel.org/r/20170518174936.20265-4-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Davidlohr Bueso
|
a54dae0338 |
lib/interval_tree_test.c: make test options module parameters
Allows for more flexible debugging. Link: http://lkml.kernel.org/r/20170518174936.20265-3-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Davidlohr Bueso
|
0f789b6764 |
lib/interval_tree_test.c: allow the module to be compiled-in
Patch series "lib/interval_tree_test: some debugging improvements". Here are some patches that update the interval_tree_test module allowing users to pass finer grained options to run the actual test. This patch (of 4): It is a tristate after all, and also serves well for quick debugging. Link: http://lkml.kernel.org/r/20170518174936.20265-2-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Alexey Dobriyan
|
be5f3c7774 |
lib/kstrtox.c: use "unsigned int" more
gcc does generates stupid code sign extending data back and forth. Help by using "unsigned int". add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-61 (-61) function old new delta _parse_integer 128 123 -5 It _still_ does generate useless MOVSX but I don't know how to delete it: 0000000000000070 <_parse_integer>: ... a0: 89 c2 mov edx,eax a2: 83 e8 30 sub eax,0x30 a5: 83 f8 09 cmp eax,0x9 a8: 76 11 jbe bb <_parse_integer+0x4b> aa: 83 ca 20 or edx,0x20 ad: 0f be c2 ===> movsx eax,dl <=== useless b0: 8d 50 9f lea edx,[rax-0x61] b3: 83 fa 05 cmp edx,0x5 Patch also helps on embedded archs which generally only like "int". On arm "and 0xff" is generated which is waste because all values used in comparisons are positive. Link: http://lkml.kernel.org/r/20170514194720.GB32563@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Alexey Dobriyan
|
512750ef8b |
lib/kstrtox.c: delete end-of-string test
Standard "while (*s)" test is unnecessary because NUL won't pass valid-digit test anyway. Save one branch per parsed character. Link: http://lkml.kernel.org/r/20170514193756.GA32563@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Matthew Wilcox
|
e5af323c9b |
bitmap: optimise bitmap_set and bitmap_clear of a single bit
We have eight users calling bitmap_clear for a single bit and seventeen calling bitmap_set for a single bit. Rather than fix all of them to call __clear_bit or __set_bit, turn bitmap_clear and bitmap_set into inline functions and make this special case efficient. Link: http://lkml.kernel.org/r/20170628153221.11322-3-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox
|
3cc78125a0 |
lib/test_bitmap.c: add optimisation tests
Patch series "Bitmap optimisations", v2. These three bitmap patches use more efficient specialisations when the compiler can figure out that it's safe to do so. Thanks to Rasmus's eagle eyes, a nasty bug in v1 was avoided, and I've added a test case which would have caught it. This patch (of 4): This version of the test is actually a no-op; the next patch will enable it. Link: http://lkml.kernel.org/r/20170628153221.11322-2-willy@infradead.org Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
2ceedf97ae |
dmaengine updates for 4.13-rc1
- removal of AVR32 support in dw driver as AVR32 is gone - new driver for Broadcom stream buffer accelerator (SBA) RAID driver - add support for Faraday Technology FTDMAC020 in amba-pl08x driver - IOMMU support in pl330 driver - updates to bunch of drivers -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZYG73AAoJEHwUBw8lI4NH+DoP/1f0TsYrQFCjNqa4nybjU1Sd bbqnpouuJscwt8Qk2LGuSimi0QG91gQOLvrmueFbXtEg86nPOfa0RnWGNF4qwYFK oliDlXF2PnV65J5kl7CvqXCj6bFiXCULVdO9JD2HFoFB1+lzXN9JQqOG5ne29BQ6 g3HNRlUTXNzQXWisgbAOLxuuvyfv68Zo3wCLYLkd4vC/C4zmxM+KXUG8+s0hS7t3 AOUpYW6F/C+y1Ax+SiACm0QGNZ4rc6/+ZUIIXUO5CfTYGjv6QUdzxiLHtc4br25l 2CoN9IP4V/OxHaW9T1jA61TeAAFr63oXYfDMBBzclzVryZRAIU72ups31uRQXpFz 99zUQ0OsdOCvy0oPInhNd8u+cpyh/4e2RDgSZ9rxw3xVaKFh8lsw5OtcCBQzCMeI xgFCUBHsLjEi4uafJcl6n2T7+Y4Y0KgOmxPHZo3tpq/2a5M6tVy8k68m3afCQylF 1SOxzVZdDRUutPpviQWop6RgP0EcVuzaUJ0vO4nat4j77vuimaPqdk+oLV46XP2d 5I52kcvbVI4BbJavTjVs3FRdcez0pW37iOw+5MOxHE3dnBp4X/3btFzBY4aOsdg0 wVut3B+9U4WHDBF2ConBxxMvGqMYmcssOQ096GdC6oBHHS7x6n7tEVPiZ5iUacn5 LB8k9AZtpBC7nUWPH7FS =srPZ -----END PGP SIGNATURE----- Merge tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine updates from Vinod Koul: - removal of AVR32 support in dw driver as AVR32 is gone - new driver for Broadcom stream buffer accelerator (SBA) RAID driver - add support for Faraday Technology FTDMAC020 in amba-pl08x driver - IOMMU support in pl330 driver - updates to bunch of drivers * tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits) dmaengine: qcom_hidma: correct API violation for submit dmaengine: zynqmp_dma: Remove max len check in zynqmp_dma_prep_memcpy dmaengine: tegra-apb: Really fix runtime-pm usage dmaengine: fsl_raid: make of_device_ids const. dmaengine: qcom_hidma: allow ACPI/DT parameters to be overridden dmaengine: fsldma: set BWC, DAHTS and SAHTS values correctly dmaengine: Kconfig: Simplify the help text for MXS_DMA dmaengine: pl330: Delete unused functions dmaengine: Replace WARN_TAINT_ONCE() with pr_warn_once() dmaengine: Kconfig: Extend the dependency for MXS_DMA dmaengine: mxs: Use %zu for printing a size_t variable dmaengine: ste_dma40: Cleanup scatterlist layering violations dmaengine: imx-dma: cleanup scatterlist layering violations dmaengine: use proper name for the R-Car SoC dmaengine: imx-sdma: Fix compilation warning. dmaengine: imx-sdma: Handle return value of clk_prepare_enable dmaengine: pl330: Add IOMMU support to slave tranfers dmaengine: DW DMAC: Handle return value of clk_prepare_enable dmaengine: pl08x: use GENMASK() to create bitmasks dmaengine: pl08x: Add support for Faraday Technology FTDMAC020 ... |
||
|
Linus Torvalds
|
6a37e94009 |
Merge branch 'uaccess-work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter hardening from Al Viro:
"This is the iov_iter/uaccess/hardening pile.
For one thing, it trims the inline part of copy_to_user/copy_from_user
to the minimum that *does* need to be inlined - object size checks,
basically. For another, it sanitizes the checks for iov_iter
primitives. There are 4 groups of checks: access_ok(), might_fault(),
object size and KASAN.
- access_ok() had been verified by whoever had set the iov_iter up.
However, that has happened in a function far away, so proving that
there's no path to actual copying bypassing those checks is hard
and proving that iov_iter has not been buggered in the meanwhile is
also not pleasant. So we want those redone in actual
copyin/copyout.
- might_fault() is better off consolidated - we know whether it needs
to be checked as soon as we enter iov_iter primitive and observe
the iov_iter flavour. No need to wait until the copyin/copyout. The
call chains are short enough to make sure we won't miss anything -
in fact, it's more robust that way, since there are cases where we
do e.g. forced fault-in before getting to copyin/copyout. It's not
quite what we need to check (in particular, combination of
iovec-backed and set_fs(KERNEL_DS) is almost certainly a bug, not a
cause to skip checks), but that's for later series. For now let's
keep might_fault().
- KASAN checks belong in copyin/copyout - at the same level where
other iov_iter flavours would've hit them in memcpy().
- object size checks should apply to *all* iov_iter flavours, not
just iovec-backed ones.
There are two groups of primitives - one gets the kernel object
described as pointer + size (copy_to_iter(), etc.) while another gets
it as page + offset + size (copy_page_to_iter(), etc.)
For the first group the checks are best done where we actually have a
chance to find the object size. In other words, those belong in inline
wrappers in uio.h, before calling into iov_iter.c. Same kind as we
have for inlined part of copy_to_user().
For the second group there is no object to look at - offset in page is
just a number, it bears no type information. So we do them in the
common helper called by iov_iter.c primitives of that kind. All it
currently does is checking that we are not trying to access outside of
the compound page; eventually we might want to add some sanity checks
on the page involved.
So the things we need in copyin/copyout part of iov_iter.c do not
quite match anything in uaccess.h (we want no zeroing, we *do* want
access_ok() and KASAN and we want no might_fault() or object size
checks done on that level). OTOH, these needs are simple enough to
provide a couple of helpers (static in iov_iter.c) doing just what we
need..."
* 'uaccess-work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
iov_iter: saner checks on copyin/copyout
iov_iter: sanity checks for copy to/from page primitives
iov_iter/hardening: move object size checks to inlined part
copy_{to,from}_user(): consolidate object size checks
copy_{from,to}_user(): move kasan checks and might_fault() out-of-line
|
||
|
Linus Torvalds
|
088737f44b |
Writeback error handling fixes (pile #2)
-----BEGIN PGP SIGNATURE-----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=3Z93
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull Writeback error handling updates from Jeff Layton:
"This pile represents the bulk of the writeback error handling fixes
that I have for this cycle. Some of the earlier patches in this pile
may look trivial but they are prerequisites for later patches in the
series.
The aim of this set is to improve how we track and report writeback
errors to userland. Most applications that care about data integrity
will periodically call fsync/fdatasync/msync to ensure that their
writes have made it to the backing store.
For a very long time, we have tracked writeback errors using two flags
in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
writeback error occurs (via mapping_set_error) and are cleared as a
side-effect of filemap_check_errors (as you noted yesterday). This
model really sucks for userland.
Only the first task to call fsync (or msync or fdatasync) will see the
error. Any subsequent task calling fsync on a file will get back 0
(unless another writeback error occurs in the interim). If I have
several tasks writing to a file and calling fsync to ensure that their
writes got stored, then I need to have them coordinate with one
another. That's difficult enough, but in a world of containerized
setups that coordination may even not be possible.
But wait...it gets worse!
The calls to filemap_check_errors can be buried pretty far down in the
call stack, and there are internal callers of filemap_write_and_wait
and the like that also end up clearing those errors. Many of those
callers ignore the error return from that function or return it to
userland at nonsensical times (e.g. truncate() or stat()). If I get
back -EIO on a truncate, there is no reason to think that it was
because some previous writeback failed, and a subsequent fsync() will
(incorrectly) return 0.
This pile aims to do three things:
1) ensure that when a writeback error occurs that that error will be
reported to userland on a subsequent fsync/fdatasync/msync call,
regardless of what internal callers are doing
2) report writeback errors on all file descriptions that were open at
the time that the error occurred. This is a user-visible change,
but I think most applications are written to assume this behavior
anyway. Those that aren't are unlikely to be hurt by it.
3) document what filesystems should do when there is a writeback
error. Today, there is very little consistency between them, and a
lot of cargo-cult copying. We need to make it very clear what
filesystems should do in this situation.
To achieve this, the set adds a new data type (errseq_t) and then
builds new writeback error tracking infrastructure around that. Once
all of that is in place, we change the filesystems to use the new
infrastructure for reporting wb errors to userland.
Note that this is just the initial foray into cleaning up this mess.
There is a lot of work remaining here:
1) convert the rest of the filesystems in a similar fashion. Once the
initial set is in, then I think most other fs' will be fairly
simple to convert. Hopefully most of those can in via individual
filesystem trees.
2) convert internal waiters on writeback to use errseq_t for
detecting errors instead of relying on the AS_* flags. I have some
draft patches for this for ext4, but they are not quite ready for
prime time yet.
This was a discussion topic this year at LSF/MM too. If you're
interested in the gory details, LWN has some good articles about this:
https://lwn.net/Articles/718734/
https://lwn.net/Articles/724307/"
* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
btrfs: minimal conversion to errseq_t writeback error reporting on fsync
xfs: minimal conversion to errseq_t writeback error reporting
ext4: use errseq_t based error handling for reporting data writeback errors
fs: convert __generic_file_fsync to use errseq_t based reporting
block: convert to errseq_t based writeback error tracking
dax: set errors in mapping when writeback fails
Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
fs: new infrastructure for writeback error handling and reporting
lib: add errseq_t type and infrastructure for handling it
mm: don't TestClearPageError in __filemap_fdatawait_range
mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
jbd2: don't clear and reset errors after waiting on writeback
buffer: set errors in mapping at the time that the error occurs
fs: check for writeback errors after syncing out buffers in generic_file_fsync
buffer: use mapping_set_error instead of setting the flag
mm: fix mapping_set_error call in me_pagecache_dirty
|
||
|
Linus Torvalds
|
dd6ec12f3b |
DeviceTree for 4.13:
- vsprintf format specifier %pOF for device_node's. This will enable us to stop storing the full node names. Conversion of users will happen next cycle. - Update documentation to point to DT specification instead of ePAPR. - Split out graph and property functions to a separate file. - New of-graph functions for ALSA - Add vendor prefixes for RISC-V, Linksys, iWave Systems, Roofull, Itead, and BananaPi. - Improve dtx_diff utility filename printing. -----BEGIN PGP SIGNATURE----- iQItBAABCAAXBQJZXpNsEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcO2gg// VxhXDs6+oTkBCUzVtEHue/yv44q8Sa7M3jY3/VqVSLa3Eopp/4dmDgBAtWYYX2ou KfUl0+yD4cSKhw6oxycwsaS61zf8JkM4sbXYQTphty/5lwxq0/i3OGj98Uk9w9JH kM+b1Wi7Z6GBzqh1GuS4E+ADSktMadxd0LugXZvDEMVQZusv/nzWxzq/bdMUqW19 0nvBL9ABRAPirhBuMSWpYlEEkwQn7JF3LO3i8IBDhhFzMsvbfR7cTp+ydt6I2pk8 h8DxlsaPIOWH5KePNEmzsd1VlV/HcNl7/vZb0ev0Eb94TLHJRJ7V0ZMQxc5vxHgN x6aMlBLHGzG6LI5CV30pWAD/qrrtXNbqmlj1Qjd+FXen6NuQSngSfo5aXzXrM6X5 ZUD7ou9KzYObraOarU6w2qSICok85bGQHOiBQDVTmE4E/4AVscnc1VQi/rTHrt2O Yt3AV8iwaum8q2PVOVKdy8tu7x/7BzBdSObYtjjMIuWcrInnlIyUkmehtCl38kqV fd6OIVEOhTJTr0CYDiXEbKtG81j7JhoREdVZvzcEhWFGt/98Rjc9tkTihhFzky4m D6lpzpf8mvemrBiMegyQbhVcfHyo0fJe+6giV7cssf2Xhe1QkC15UXywbccO7xFJ nf3yqCl8YVEPG0l1MrR+YEHHcnr4ZIEZpejOv+SzZeg= =DNwf -----END PGP SIGNATURE----- Merge tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - vsprintf format specifier %pOF for device_node's. This will enable us to stop storing the full node names. Conversion of users will happen next cycle. - Update documentation to point to DT specification instead of ePAPR. - Split out graph and property functions to a separate file. - New of-graph functions for ALSA - Add vendor prefixes for RISC-V, Linksys, iWave Systems, Roofull, Itead, and BananaPi. - Improve dtx_diff utility filename printing. * tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (32 commits) of: document /sys/firmware/fdt dt-bindings: Add RISC-V vendor prefix vsprintf: Add %p extension "%pOF" for device tree of: find_node_by_full_name rewrite to compare each level of: use kbasename instead of open coding dt-bindings: thermal: add file extension to brcm,ns-thermal of: update ePAPR references to point to Devicetree Specification scripts/dtc: dtx_diff - Show real file names in diff header of: detect invalid phandle in overlay of: be consistent in form of file mode of: make __of_attach_node() static of: address.c header comment typo of: fdt.c header comment typo of: make of_fdt_is_compatible() static dt-bindings: display-timing.txt convert non-ascii characters to ascii Documentation: remove overlay-notes reference to non-existent file dt-bindings: usb: exynos-usb: Add missing required VDD properties dt-bindings: Add vendor prefix for Linksys MAINTAINERS: add device tree ABI documentation file of: Add vendor prefix for iWave Systems Technologies Pvt. Ltd ... |
||
|
Linus Torvalds
|
b6ffe9ba46 |
libnvdimm for 4.13
* Introduce the _flushcache() family of memory copy helpers and use them
for persistent memory write operations on x86. The _flushcache()
semantic indicates that the cache is either bypassed for the copy
operation (movnt) or any lines dirtied by the copy operation are
written back (clwb, clflushopt, or clflush).
* Extend dax_operations with ->copy_from_iter() and ->flush()
operations. These operations and other infrastructure updates allow
all persistent memory specific dax functionality to be pushed into
libnvdimm and the pmem driver directly. It also allows dax-specific
sysfs attributes to be linked to a host device, for example:
/sys/block/pmem0/dax/write_cache
* Add support for the new NVDIMM platform/firmware mechanisms introduced
in ACPI 6.2 and UEFI 2.7. This support includes the v1.2 namespace
label format, extensions to the address-range-scrub command set, new
error injection commands, and a new BTT (block-translation-table)
layout. These updates support inter-OS and pre-OS compatibility.
* Fix a longstanding memory corruption bug in nfit_test.
* Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
capable.
* Miscellaneous fixes and small updates across libnvdimm and the nfit
driver.
Acknowledgements that came after the branch was pushed:
commit
|
||
Al Viro
|
09fc68dc66 |
iov_iter: saner checks on copyin/copyout
* might_fault() is better checked in caller (and e.g. fault-in + kmap_atomic codepath also needs might_fault() coverage) * we have already done object size checks * we have *NOT* done access_ok() recently enough; we rely upon the iovec array having passed sanity checks back when it had been created and not nothing having buggered it since. However, that's very much non-local, so we'd better recheck that. So the thing we want does not match anything in uaccess - we need access_ok + kasan checks + raw copy without any zeroing. Just define such helpers and use them here. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Linus Torvalds
|
dc502142b6 |
Merge branch 'uaccess.strlen' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull user access str* updates from Al Viro: "uaccess str...() dead code removal" * 'uaccess.strlen' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: s390 keyboard.c: don't open-code strndup_user() mips: get rid of unused __strnlen_user() get rid of unused __strncpy_from_user() instances kill strlen_user() |
||
|
Linus Torvalds
|
f72e24a124 |
This is the first pull request for the new dma-mapping subsystem
In this new subsystem we'll try to properly maintain all the generic
code related to dma-mapping, and will further consolidate arch code
into common helpers.
This pull request contains:
- removal of the DMA_ERROR_CODE macro, replacing it with calls
to ->mapping_error so that the dma_map_ops instances are
more self contained and can be shared across architectures (me)
- removal of the ->set_dma_mask method, which duplicates the
->dma_capable one in terms of functionality, but requires more
duplicate code.
- various updates for the coherent dma pool and related arm code
(Vladimir)
- various smaller cleanups (me)
-----BEGIN PGP SIGNATURE-----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=0Fso
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping infrastructure from Christoph Hellwig:
"This is the first pull request for the new dma-mapping subsystem
In this new subsystem we'll try to properly maintain all the generic
code related to dma-mapping, and will further consolidate arch code
into common helpers.
This pull request contains:
- removal of the DMA_ERROR_CODE macro, replacing it with calls to
->mapping_error so that the dma_map_ops instances are more self
contained and can be shared across architectures (me)
- removal of the ->set_dma_mask method, which duplicates the
->dma_capable one in terms of functionality, but requires more
duplicate code.
- various updates for the coherent dma pool and related arm code
(Vladimir)
- various smaller cleanups (me)"
* tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits)
ARM: dma-mapping: Remove traces of NOMMU code
ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus
ARM: NOMMU: Introduce dma operations for noMMU
drivers: dma-mapping: allow dma_common_mmap() for NOMMU
drivers: dma-coherent: Introduce default DMA pool
drivers: dma-coherent: Account dma_pfn_offset when used with device tree
dma: Take into account dma_pfn_offset
dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs
dma-mapping: remove dmam_free_noncoherent
crypto: qat - avoid an uninitialized variable warning
au1100fb: remove a bogus dma_free_nonconsistent call
MAINTAINERS: add entry for dma mapping helpers
powerpc: merge __dma_set_mask into dma_set_mask
dma-mapping: remove the set_dma_mask method
powerpc/cell: use the dma_supported method for ops switching
powerpc/cell: clean up fixed mapping dma_ops initialization
tile: remove dma_supported and mapping_error methods
xen-swiotlb: remove xen_swiotlb_set_dma_mask
arm: implement ->dma_supported instead of ->set_dma_mask
mips/loongson64: implement ->dma_supported instead of ->set_dma_mask
...
|
||
|
Linus Torvalds
|
a4c20b9a57 |
Merge branch 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu updates from Tejun Heo: "These are the percpu changes for the v4.13-rc1 merge window. There are a couple visibility related changes - tracepoints and allocator stats through debugfs, along with __ro_after_init markings and a cosmetic rename in percpu_counter. Please note that the simple O(#elements_in_the_chunk) area allocator used by percpu allocator is again showing scalability issues, primarily with bpf allocating and freeing large number of counters. Dennis is working on the replacement allocator and the percpu allocator will be seeing increased churns in the coming cycles" * 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: fix static checker warnings in pcpu_destroy_chunk percpu: fix early calls for spinlock in pcpu_stats percpu: resolve err may not be initialized in pcpu_alloc percpu_counter: Rename __percpu_counter_add to percpu_counter_add_batch percpu: add tracepoint support for percpu memory percpu: expose statistics about percpu memory via debugfs percpu: migrate percpu data structures to internal header percpu: add missing lockdep_assert_held to func pcpu_free_area mark most percpu globals as __ro_after_init |
||
Jeff Layton
|
84cbadadc6 |
lib: add errseq_t type and infrastructure for handling it
An errseq_t is a way of recording errors in one place, and allowing any number of "subscribers" to tell whether an error has been set again since a previous time. It's implemented as an unsigned 32-bit value that is managed with atomic operations. The low order bits are designated to hold an error code (max size of MAX_ERRNO). The upper bits are used as a counter. The API works with consumers sampling an errseq_t value at a particular point in time. Later, that value can be used to tell whether new errors have been set since that time. Note that there is a 1 in 512k risk of collisions here if new errors are being recorded frequently, since we have so few bits to use as a counter. To mitigate this, one bit is used as a flag to tell whether the value has been sampled since a new value was recorded. That allows us to avoid bumping the counter if no one has sampled it since it was last bumped. Later patches will build on this infrastructure to change how writeback errors are tracked in the kernel. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: NeilBrown <neilb@suse.com> Reviewed-by: Jan Kara <jack@suse.cz> |
||
|
Linus Torvalds
|
5518b69b76 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
|
||
|
Linus Torvalds
|
eed1fc8779 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek: - Store printk() messages into the main log buffer directly even in NMI when the lock is available. It is the best effort to print even large chunk of text. It is handy, for example, when all ftrace messages are printed during the system panic in NMI. - Add missing annotations to calm down compiler warnings * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: add __printf attributes to internal functions printk: Use the main logbuf in NMI when logbuf_lock is available |
||
|
Linus Torvalds
|
650fc870a2 |
There has been a fair amount of activity in the docs tree this time
around. Highlights include:
- Conversion of a bunch of security documentation into RST
- The conversion of the remaining DocBook templates by The Amazing
Mauro Machine. We can now drop the entire DocBook build chain.
- The usual collection of fixes and minor updates.
-----BEGIN PGP SIGNATURE-----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=cVjZ
-----END PGP SIGNATURE-----
Merge tag 'docs-4.13' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"There has been a fair amount of activity in the docs tree this time
around. Highlights include:
- Conversion of a bunch of security documentation into RST
- The conversion of the remaining DocBook templates by The Amazing
Mauro Machine. We can now drop the entire DocBook build chain.
- The usual collection of fixes and minor updates"
* tag 'docs-4.13' of git://git.lwn.net/linux: (90 commits)
scripts/kernel-doc: handle DECLARE_HASHTABLE
Documentation: atomic_ops.txt is core-api/atomic_ops.rst
Docs: clean up some DocBook loose ends
Make the main documentation title less Geocities
Docs: Use kernel-figure in vidioc-g-selection.rst
Docs: fix table problems in ras.rst
Docs: Fix breakage with Sphinx 1.5 and upper
Docs: Include the Latex "ifthen" package
doc/kokr/howto: Only send regression fixes after -rc1
docs-rst: fix broken links to dynamic-debug-howto in kernel-parameters
doc: Document suitability of IBM Verse for kernel development
Doc: fix a markup error in coding-style.rst
docs: driver-api: i2c: remove some outdated information
Documentation: DMA API: fix a typo in a function name
Docs: Insert missing space to separate link from text
doc/ko_KR/memory-barriers: Update control-dependencies example
Documentation, kbuild: fix typo "minimun" -> "minimum"
docs: Fix some formatting issues in request-key.rst
doc: ReSTify keys-trusted-encrypted.txt
doc: ReSTify keys-request-key.txt
...
|
||
|
Linus Torvalds
|
f4dd029ee0 |
Char/Misc patches for 4.13-rc1
Here is the "big" char/misc driver patchset for 4.13-rc1. Lots of stuff in here, a large thunderbolt update, w1 driver header reorg, the new mux driver subsystem, google firmware driver updates, and a raft of other smaller things. Full details in the shortlog. All of these have been in linux-next for a while with the only reported issue being a merge problem with this tree and the jc-docs tree in the w1 documentation area. The fix should be obvious for what to do when it happens, if not, we can send a follow-up patch for it afterward. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpXKA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynLrQCdG9SxRjAbOd6pT9Fr2NAzpUG84YsAoLw+I3iO EMi60UXWqAFJbtVMS9Aj =yrSq -----END PGP SIGNATURE----- Merge tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the "big" char/misc driver patchset for 4.13-rc1. Lots of stuff in here, a large thunderbolt update, w1 driver header reorg, the new mux driver subsystem, google firmware driver updates, and a raft of other smaller things. Full details in the shortlog. All of these have been in linux-next for a while with the only reported issue being a merge problem with this tree and the jc-docs tree in the w1 documentation area" * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits) misc: apds990x: Use sysfs_match_string() helper mei: drop unreachable code in mei_start mei: validate the message header only in first fragment. DocBook: w1: Update W1 file locations and names in DocBook mux: adg792a: always require I2C support nvmem: rockchip-efuse: add support for rk322x-efuse nvmem: core: add locking to nvmem_find_cell nvmem: core: Call put_device() in nvmem_unregister() nvmem: core: fix leaks on registration errors nvmem: correct Broadcom OTP controller driver writes w1: Add subsystem kernel public interface drivers/fsi: Add module license to core driver drivers/fsi: Use asynchronous slave mode drivers/fsi: Add hub master support drivers/fsi: Add SCOM FSI client device driver drivers/fsi/gpio: Add tracepoints for GPIO master drivers/fsi: Add GPIO based FSI master drivers/fsi: Document FSI master sysfs files in ABI drivers/fsi: Add error handling for slave drivers/fsi: Add tracepoints for low-level operations ... |
||
|
Linus Torvalds
|
974668417b |
driver core patches for 4.13-rc1
Here is the big driver core update for 4.13-rc1. The large majority of this is a lot of cleanup of old fields in the driver core structures and their remaining usages in random drivers. All of those fixes have been reviewed by the various subsystem maintainers. There's also some small firmware updates in here, a new kobject uevent api interface that makes userspace interaction easier, and a few other minor things. All of these have been in linux-next for a long while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpX4A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymobgCfd0d13IfpZoq1N41wc6z2Z0xD7cwAnRMeH1/p kEeISGpHPYP9f8PBh9FO =Hfqt -----END PGP SIGNATURE----- Merge tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big driver core update for 4.13-rc1. The large majority of this is a lot of cleanup of old fields in the driver core structures and their remaining usages in random drivers. All of those fixes have been reviewed by the various subsystem maintainers. There's also some small firmware updates in here, a new kobject uevent api interface that makes userspace interaction easier, and a few other minor things. All of these have been in linux-next for a long while with no reported issues" * tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (56 commits) arm: mach-rpc: ecard: fix build error zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO() driver-core: remove struct bus_type.dev_attrs powerpc: vio_cmo: use dev_groups and not dev_attrs for bus_type powerpc: vio: use dev_groups and not dev_attrs for bus_type USB: usbip: convert to use DRIVER_ATTR_RW s390: drivers: convert to use DRIVER_ATTR_RO/WO platform: thinkpad_acpi: convert to use DRIVER_ATTR_RO/RW pcmcia: ds: convert to use DRIVER_ATTR_RO wireless: ipw2x00: convert to use DRIVER_ATTR_RW net: ehea: convert to use DRIVER_ATTR_RO net: caif: convert to use DRIVER_ATTR_RO TTY: hvc: convert to use DRIVER_ATTR_RW PCI: pci-driver: convert to use DRIVER_ATTR_WO IB: nes: convert to use DRIVER_ATTR_RW HID: hid-core: convert to use DRIVER_ATTR_RO and drv_groups arm: ecard: fix dev_groups patch typo tty: serdev: use dev_groups and not dev_attrs for bus_type sparc: vio: use dev_groups and not dev_attrs for bus_type hid: intel-ish-hid: use dev_groups and not dev_attrs for bus_type ... |
||
Dan Williams
|
9d92573fff | Merge branch 'for-4.13/dax' into libnvdimm-for-next |