Usually the target is booted into a dependable kernel when a test
starts. The test will install the test kernel and reboot the box. But
there may be a time that the kernel is running an unreliable kernel and
the reboot may crash.
Have ktest detect crashes on a reboot and force a power-cycle instead.
This can usually happen if a test kernel was installed to run manual
tests, but the user forgot to reboot to the known good kernel.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the console is constantly outputting content, this can cause ktest
to get stuck waiting on the monitor to settle down.
The option MAX_MONITOR_WAIT is the maximum time (in seconds) for ktest
to wait for the console to flush.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With a name like 'oldnoconfig' one may think that the config generated
would disable all configs that were not defined (selecting "no" for all
options). But this is not the case. It selects the default. If a config
has a 'default y', then it is added if not specified.
This broke the config bisect, because options not specified by a config
will just use the default, where it expected to turn off. This caused an
option to be enabled that disabled an option that would break the build.
The end result was that we never found the bad config at the end of the
test.
Instead of using 'make oldnoconfig', ktest now builds the options it
expects enabled and disabled. When it turns off an option, it will no
longer remove it, but actually set it to:
# CONFIG_FOO is not set.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The config-bisect can take a bad config and bisect it down to find out
what config actually breaks the config. But as all tests will apply a
minconfig (defined by a user) to apply before booting, it is possible
that the minconfig could actually make the bad config work (minconfigs
can disable configs). The end result is that the config bisect test will
not find a config that breaks. This can be rather frustrating to the
user.
The CONFIG_BISECT_CHECK option, when set to 1, will make sure that the
bad config (with the minconfig applied) still fails before trying to
bisect.
And yes, I did get burned by this.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the PRE_INSTALL option that will allow a user to specify a shell
command to be executed before the install operation executes.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In order to let the user add commands before and after ktest runs, the
PRE_KTEST and POST_KTEST options are defined. They hold shell commands
that will execute befor ktest runs its first test, as well as when it
completed its last test.
The PRE_TEST and POST_TEST will be run befor and after (respectively)
for a given test. They can either be global (done for all tests) or
defined by a single test.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Using the guestmount option on record:
$ perf kvm --guest --host --guestmount=/tmp/guest-mount record -ag
But not the subsequent report:
$ perf kvm report
causes a SEGFAULT in the usual place:
(gdb) bt
0 0x0000000000470356 in machine__mmap_name (self=0x0, bf=0x7fffffffbdb0 " z\370\367\377\177", size=
4096) at util/map.c:712
1 0x00000000004453e8 in perf_event__process_kernel_mmap (tool=0x7fffffffde10, event=0x7ffff7f87e38,
machine=0x0) at util/event.c:550
2 0x00000000004458c9 in perf_event__process_mmap (tool=0x7fffffffde10, event=0x7ffff7f87e38, sample=
0x7fffffffd2a0, machine=0x0) at util/event.c:656
3 0x00000000004733e0 in perf_session_deliver_event (session=0x91aca0, event=0x7ffff7f87e38, sample=
0x7fffffffd2a0, tool=0x7fffffffde10, file_offset=7736) at util/session.c:979
...
The MMAP events in this case already contain the full path to the
module. No need to require it for the report path to.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1341241977-71535-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 743eb86865 reworked when the
machines were created. Prior to this commit guest machines could be
created in perf_event__process_kernel_mmap() while processing kernel
MMAP events. This commit assumes that the machines exist by the time
perf_session_deliver_event is called (e.g., during processing of build
id events) - which is not always correct.
One example is the use of default guest args (--guestkallsyms and
--guestmodules) for short times where no samples hit within a guest
module. For this case no build id is added to the file header. No build
id == no machine created. That leads to the next example -- the use of
no-buildid (-B) on the record for all perf-kvm invocations. In both
cases perf report dies with a SEGFAULT of the form:
(gdb) bt
0 0x000000000046dd7b in machine__mmap_name (self=0x0, bf=0x7fffffffbd20 "q\021", size=4096) at util/map.c:715
1 0x0000000000444161 in perf_event__process_kernel_mmap (tool=0x7fffffffdd80, event=0x7ffff7fb4120, machine=0x0) at util/event.c:562
2 0x0000000000444642 in perf_event__process_mmap (tool=0x7fffffffdd80, event=0x7ffff7fb4120, sample=0x7fffffffd210, machine=0x0)
at util/event.c:668
3 0x0000000000470e0b in perf_session_deliver_event (session=0x915ca0, event=0x7ffff7fb4120, sample=0x7fffffffd210, tool=0x7fffffffdd80,
file_offset=8480) at util/session.c:979
4 0x000000000047032e in flush_sample_queue (s=0x915ca0, tool=0x7fffffffdd80) at util/session.c:679
5 0x0000000000471c8d in __perf_session__process_events (session=0x915ca0, data_offset=400, data_size=150448, file_size=150848, tool=
0x7fffffffdd80) at util/session.c:1363
6 0x0000000000471d42 in perf_session__process_events (self=0x915ca0, tool=0x7fffffffdd80) at util/session.c:1379
7 0x000000000042484a in __cmd_report (rep=0x7fffffffdd80) at builtin-report.c:368
8 0x0000000000425bf1 in cmd_report (argc=0, argv=0x915b00, prefix=0x0) at builtin-report.c:756
9 0x0000000000438505 in __cmd_report (argc=4, argv=0x7fffffffe260) at builtin-kvm.c:84
10 0x000000000043882a in cmd_kvm (argc=4, argv=0x7fffffffe260, prefix=0x0) at builtin-kvm.c:131
11 0x00000000004152cd in run_builtin (p=0x7a54e8, argc=9, argv=0x7fffffffe260) at perf.c:273
12 0x00000000004154c7 in handle_internal_command (argc=9, argv=0x7fffffffe260) at perf.c:345
13 0x0000000000415613 in run_argv (argcp=0x7fffffffe14c, argv=0x7fffffffe140) at perf.c:389
14 0x0000000000415899 in main (argc=9, argv=0x7fffffffe260) at perf.c:487
Fix by allowing the machine to be created in perf_session_deliver_event.
Tested with --guestmount option and default guest args, with and without
-B arg on record for both and for short (10 seconds) and long (10
minutes) windows.
Reported-by: Pradeep Kumar Surisetty <psuriset@linux.vnet.ibm.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pradeep Kumar Surisetty <psuriset@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1341180697-64515-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Consider the commands:
perf record -e sched:sched_switch -fo /tmp/perf.data -a -- sleep 1
perf script -i /tmp/perf.data
In v3.4 the output has the form (lines wrapped here)
perf 29214 [005] 821043.582596: sched_switch:
prev_comm=perf prev_pid=29214 prev_prio=120
prev_state=S ==> next_comm=swapper/5 next_pid=0 next_prio=120
In 3.5 that same line has become:
perf 29214 [005] 821043.582596: sched_switch:
<...>-29214 [005] 0.000000000: sched_switch:
prev_comm=perf prev_pid=29214 prev_prio=120
prev_state=S ==> next_comm=swapper/5 next_pid=0 next_prio=120
Note the duplicates in the output -- pid, cpu, event name. With
this patch the v3.4 output is restored:
perf 29214 [005] 821043.582596: sched_switch:
prev_comm=perf prev_pid=29214 prev_prio=120
prev_state=S ==> next_comm=swapper/5 next_pid=0 next_prio=120
v3:
Remove that pesky newline too. Output now matches v3.4 (pre-libtracevent).
v2:
Change print_trace_event function local to perf per Steve's comments.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1339698977-68962-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf updates from Ingo Molnar.
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ftrace: Make all inline tags also include notrace
perf: Use css_tryget() to avoid propping up css refcount
perf tools: Fix synthesizing tracepoint names from the perf.data headers
perf stat: Fix default output file
perf tools: Fix endianity swapping for adds_features bitmask
We need to use the per event info snapshoted at record time to
synthesize the events name, so do it just after reading the perf.data
headers, when we already processed the /sys events data, otherwise we'll
end up using the local /sys that only by sheer luck will have the same
tracepoint ID -> real event association.
Example:
# uname -a
Linux felicio.ghostprotocols.net 3.4.0-rc5+ #1 SMP Sat May 19 15:27:11 BRT 2012 x86_64 x86_64 x86_64 GNU/Linux
# perf record -e sched:sched_switch usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.015 MB perf.data (~648 samples) ]
# cat /t/events/sched/sched_switch/id
279
# perf evlist -v
sched:sched_switch: sample_freq=1, type: 2, config: 279, size: 80, sample_type: 1159, read_format: 7, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
#
So on the above machine the sched:sched_switch has tracepoint id 279, but on
the machine were we'll analyse it it has a different id:
$ cat /t/events/sched/sched_switch/id
56
$ perf evlist -i /tmp/perf.data
kmem:mm_balancedirty_writeout
$ cat /t/events/kmem/mm_balancedirty_writeout/id
279
With this fix:
$ perf evlist -i /tmp/perf.data
sched:sched_switch
Reported-by: Dmitry Antipov <dmitry.antipov@linaro.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-auwks8fpuhmrdpiefs55o5oz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following commit:
commit 56f3bae706
Author: Jim Cromie <jim.cromie@gmail.com>
Date: Wed Sep 7 17:14:00 2011 -0600
perf stat: Add --log-fd <N> option to redirect stderr elsewhere
introduced a bug in the way perf stat outputs the results by default,
i.e., without the --log-fd or --output option. It would default to
writing to file descriptor 0, i.e., stdin. Writing to stdin is allowed
and is equivalent to writing to stdout. However, there is a major
difference for any script that was already capturing the output of perf
stat via redirection:
perf stat >/tmp/log .... or perf stat 2>/tmp/log ....
They would not capture anything anymore. They would have to do:
perf stat 0>/tmp/log ...
This breaks compatibility with existing scripts and does not look very
natural.
This patch fixes the problem by looking at output_fd only when it was
modified by user (> 0). It also checks that the value if positive.
Passing --log-fd 0 is ignored.
I would also argue that defaulting to stderr for the results is not the
right thing to do, though this patch does not address this specific
issue.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jim Cromie <jim.cromie@gmail.com>
Link: http://lkml.kernel.org/r/20120515111111.GA9870@quad
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on Jiri's latest attempt:
https://lkml.org/lkml/2012/5/16/61
Basically, adds_features should be byte swapped assuming unsigned
longs are either 8-bytes (u64) or 4-bytes (u32).
Fixes 32-bit ppc dumping 64-bit x86 feature data:
========
captured on: Sun May 20 19:23:23 2012
hostname : nxos-vdc-dev3
os release : 3.4.0-rc7+
perf version : 3.4.rc4.137.g978da3
arch : x86_64
nrcpus online : 16
nrcpus avail : 16
cpudesc : Intel(R) Xeon(R) CPU E5540 @ 2.53GHz
cpuid : GenuineIntel,6,26,5
total memory : 24680324 kB
...
Verified 64-bit x86 can still dump feature data for 32-bit ppc.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/4FBBB539.5010805@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The SuSE security team suggested to use recvfrom instead of recv to be
certain that the connector message is originated from kernel.
CVE-2012-2669
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Marcus Meissner <meissner@suse.de>
Signed-off-by: Sebastian Krahmer <krahmer@suse.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull perf fixes from Ingo Molnar:
"A bit larger than what I'd wish for - half of it is due to hw driver
updates to Intel Ivy-Bridge which info got recently released,
cycles:pp should work there now too, amongst other things. (but we
are generally making exceptions for hardware enablement of this type.)
There are also callchain fixes in it - responding to mostly
theoretical (but valid) concerns. The tooling side sports perf.data
endianness/portability fixes which did not make it for the merge
window - and various other fixes as well."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
perf/x86: Check user address explicitly in copy_from_user_nmi()
perf/x86: Check if user fp is valid
perf: Limit callchains to 127
perf/x86: Allow multiple stacks
perf/x86: Update SNB PEBS constraints
perf/x86: Enable/Add IvyBridge hardware support
perf/x86: Implement cycles:p for SNB/IVB
perf/x86: Fix Intel shared extra MSR allocation
x86/decoder: Fix bsr/bsf/jmpe decoding with operand-size prefix
perf: Remove duplicate invocation on perf_event_for_each
perf uprobes: Remove unnecessary check before strlist__delete
perf symbols: Check for valid dso before creating map
perf evsel: Fix 32 bit values endianity swap for sample_id_all header
perf session: Handle endianity swap on sample_id_all header data
perf symbols: Handle different endians properly during symbol load
perf evlist: Pass third argument to ioctl explicitly
perf tools: Update ioctl documentation for PERF_IOC_FLAG_GROUP
perf tools: Make --version show kernel version instead of pull req tag
perf tools: Check if callchain is corrupted
perf callchain: Make callchain cursors TLS
...
Pull perf fixes from Arnaldo Carvalho de Melo:
* Endianness fixes from Jiri Olsa
* Fixes for make perf tarball
* Fix for DSO name in perf script callchains, from David Ahern
* Segfault fixes for perf top --callchain, from Namhyung Kim
* Minor function result fixes from Srikar Dronamraju
* Add missing 3rd ioctl parameter, from Namhyung Kim
* Fix pager usage in minimal embedded systems, from Avik Sil
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Initial IVB support went into turbostat in Linux-3.1:
553575f1ae
(tools turbostat: recognize and run properly on IVB)
However, when running on IVB, turbostat would fail
to report the new couters added with SNB, c7, pc2 and pc7.
So in scenarios where these counters are non-zero on IVB,
turbostat would report erroneous residencey results.
In particular c7 time would be added to c1 time,
since c1 time is calculated as "that which is left over".
Also, turbostat reports MHz capabilities when passed
the "-v" option, and it would incorrectly report 133MHz
bclk instead of 100MHz bclk for IVB, which would inflate
GHz reported with that option.
This patch is a backport of a fix already included in turbostat v2.
Signed-off-by: Len Brown <len.brown@intel.com>
Linux 3.4 included a modification to turbostat to
lower cross-call overhead by using scheduler affinity:
15aaa34654
(tools turbostat: reduce measurement overhead due to IPIs)
In the use-case where turbostat forks a child program,
that change had the un-intended side-effect of binding
the child to the last cpu in the system.
This change removed the binding before forking the child.
This is a back-port of a fix already included in turbostat v2.
Signed-off-by: Len Brown <len.brown@intel.com>
Merge misc patches from Andrew Morton:
- the "misc" tree - stuff from all over the map
- checkpatch updates
- fatfs
- kmod changes
- procfs
- cpumask
- UML
- kexec
- mqueue
- rapidio
- pidns
- some checkpoint-restore feature work. Reluctantly. Most of it
delayed a release. I'm still rather worried that we don't have a
clear roadmap to completion for this work.
* emailed from Andrew Morton <akpm@linux-foundation.org>: (78 patches)
kconfig: update compression algorithm info
c/r: prctl: add ability to set new mm_struct::exe_file
c/r: prctl: extend PR_SET_MM to set up more mm_struct entries
c/r: procfs: add arg_start/end, env_start/end and exit_code members to /proc/$pid/stat
syscalls, x86: add __NR_kcmp syscall
fs, proc: introduce /proc/<pid>/task/<tid>/children entry
sysctl: make kernel.ns_last_pid control dependent on CHECKPOINT_RESTORE
aio/vfs: cleanup of rw_copy_check_uvector() and compat_rw_copy_check_uvector()
eventfd: change int to __u64 in eventfd_signal()
fs/nls: add Apple NLS
pidns: make killed children autoreap
pidns: use task_active_pid_ns in do_notify_parent
rapidio/tsi721: add DMA engine support
rapidio: add DMA engine support for RIO data transfers
ipc/mqueue: add rbtree node caching support
tools/selftests: add mq_perf_tests
ipc/mqueue: strengthen checks on mqueue creation
ipc/mqueue: correct mq_attr_ok test
ipc/mqueue: improve performance of send/recv
selftests: add mq_open_tests
...
While doing the checkpoint-restore in the user space one need to determine
whether various kernel objects (like mm_struct-s of file_struct-s) are
shared between tasks and restore this state.
The 2nd step can be solved by using appropriate CLONE_ flags and the
unshare syscall, while there's currently no ways for solving the 1st one.
One of the ways for checking whether two tasks share e.g. mm_struct is to
provide some mm_struct ID of a task to its proc file, but showing such
info considered to be not that good for security reasons.
Thus after some debates we end up in conclusion that using that named
'comparison' syscall might be the best candidate. So here is it --
__NR_kcmp.
It takes up to 5 arguments - the pids of the two tasks (which
characteristics should be compared), the comparison type and (in case of
comparison of files) two file descriptors.
Lookups for pids are done in the caller's PID namespace only.
At moment only x86 is supported and tested.
[akpm@linux-foundation.org: fix up selftests, warnings]
[akpm@linux-foundation.org: include errno.h]
[akpm@linux-foundation.org: tweak comment text]
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Valdis.Kletnieks@vt.edu
Cc: Michal Marek <mmarek@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the mq_perf_tests tool I used when creating my mq performance patch.
Also add a local .gitignore to keep the binaries from showing up in git
status output.
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a directory to house POSIX message queue subsystem specific tests.
Add first test which checks the operation of mq_open() under various
corner conditions.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Joe Korty <joe.korty@ccur.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We swap the sample_id_all header by u64 pointers. Some members of the
header happen to be 32 bit values. We need to handle them separatelly.
Together with other endianity patches, this change fixies perf report
discrepancies on origin and target systems as described in test 1 below,
e.g. following perf report diff:
...
0.12% ps [kernel.kallsyms] [k] clear_page
- 0.12% awk bash [.] alloc_word_desc
+ 0.12% awk bash [.] yyparse
0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e
0.10% perf libc-2.12.so [.] __ctype_toupper_loc
- 0.09% rhts-test-runne bash [.] maybe_make_export_env
+ 0.09% rhts-test-runne bash [.] 0x385a0
0.09% ps [kernel.kallsyms] [k] page_fault
...
Note, running following to test perf endianity handling:
test 1)
- origin system:
# perf record -a -- sleep 10 (any perf record will do)
# perf report > report.origin
# perf archive perf.data
- copy the perf.data, report.origin and perf.data.tar.bz2
to a target system and run:
# tar xjvf perf.data.tar.bz2 -C ~/.debug
# perf report > report.target
# diff -u report.origin report.target
- the diff should produce no output
(besides some white space stuff and possibly different
date/TZ output)
test 2)
- origin system:
# perf record -ag -fo /tmp/perf.data -- sleep 1
- mount origin system root to the target system on /mnt/origin
- target system:
# perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \
--kallsyms /mnt/origin/proc/kallsyms
- complete perf.data header is displayed
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338380624-7443-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding endianity swapping for event header attached via sample_id_all.
Currently we dont do that and it's causing wrong data to be read when
running report on architecture with different endianity than the record.
The perf is currently able to process 32-bit PPC samples on 32-bit
and 64-bit x86.
Together with other endianity patches, this change fixies perf report
discrepancies on origin and target systems as described in test 1
below, e.g. following perf report diff:
...
0.12% ps [kernel.kallsyms] [k] clear_page
- 0.12% awk bash [.] alloc_word_desc
+ 0.12% awk bash [.] yyparse
0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e
0.10% perf libc-2.12.so [.] __ctype_toupper_loc
- 0.09% rhts-test-runne bash [.] maybe_make_export_env
+ 0.09% rhts-test-runne bash [.] 0x385a0
0.09% ps [kernel.kallsyms] [k] page_fault
...
Note, running following to test perf endianity handling:
test 1)
- origin system:
# perf record -a -- sleep 10 (any perf record will do)
# perf report > report.origin
# perf archive perf.data
- copy the perf.data, report.origin and perf.data.tar.bz2
to a target system and run:
# tar xjvf perf.data.tar.bz2 -C ~/.debug
# perf report > report.target
# diff -u report.origin report.target
- the diff should produce no output
(besides some white space stuff and possibly different
date/TZ output)
test 2)
- origin system:
# perf record -ag -fo /tmp/perf.data -- sleep 1
- mount origin system root to the target system on /mnt/origin
- target system:
# perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \
--kallsyms /mnt/origin/proc/kallsyms
- complete perf.data header is displayed
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we dont care about the file object's endianness. It's possible
we read buildid file object from different architecture than we are
currentlly running on. So we need to care about properly reading such
object's data - handle different endianness properly.
Adding:
needs_swap DSO field
dso__swap_init function to initialize DSO's needs_swap
DSO__SWAP to read the data with proper swaps
Together with other endianity patches, this change fixies perf report
discrepancies on origin and target systems as described in test 1 below,
e.g. following perf report diff:
...
0.12% ps [kernel.kallsyms] [k] clear_page
- 0.12% awk bash [.] alloc_word_desc
+ 0.12% awk bash [.] yyparse
0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e
0.10% perf libc-2.12.so [.] __ctype_toupper_loc
- 0.09% rhts-test-runne bash [.] maybe_make_export_env
+ 0.09% rhts-test-runne bash [.] 0x385a0
0.09% ps [kernel.kallsyms] [k] page_fault
...
Note, running following to test perf endianity handling:
test 1)
- origin system:
# perf record -a -- sleep 10 (any perf record will do)
# perf report > report.origin
# perf archive perf.data
- copy the perf.data, report.origin and perf.data.tar.bz2
to a target system and run:
# tar xjvf perf.data.tar.bz2 -C ~/.debug
# perf report > report.target
# diff -u report.origin report.target
- the diff should produce no output
(besides some white space stuff and possibly different
date/TZ output)
test 1)
- origin system:
# perf record -ag -fo /tmp/perf.data -- sleep 1
- mount origin system root to the target system on /mnt/origin
- target system:
# perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \
--kallsyms /mnt/origin/proc/kallsyms
- complete perf.data header is displayed
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338380624-7443-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ioctl on perf event fd wants 3 arguments but we only passed 2. As
the only user of the functions is perf record and it calls them for
every event (regardless of group setting), just pass 0 for now.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338443506-25009-3-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ioctl interface of perf event fd receives 3 arguments to control
event group behavior but it lacked documentation.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338443506-25009-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We faced segmentation fault on perf top -G at very high sampling rate
due to a corrupted callchain. While the root cause was not revealed (I
failed to figure it out), this patch tries to protect us from the
segfault on such cases.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sunjin Yang <fan4326@gmail.com>
Link: http://lkml.kernel.org/r/1338443007-24857-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf top -G has a race on callchain cursor between main thread and
display thread. Since the callchain cursors are used locally make them
thread-local data would solve the problem.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reported-by: Sunjin Yang <fan4326@gmail.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sunjin Yang <fan4326@gmail.com>
Link: http://lkml.kernel.org/r/1338443007-24857-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf updates from Ingo Molnar.
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf ui browser: Stop using 'self'
perf annotate browser: Read perf config file for settings
perf config: Allow '_' in config file variable names
perf annotate browser: Make feature toggles global
perf annotate browser: The idx_asm field should be used in asm only view
perf tools: Convert critical messages to ui__error()
perf ui: Make --stdio default when TUI is not supported
tools lib traceevent: Silence compiler warning on 32bit build
perf record: Fix branch_stack type in perf_record_opts
perf tools: Reconstruct event with modifiers from perf_event_attr
perf top: Fix counter name fixup when fallbacking to cpu-clock
perf tools: fix thread_map__new_by_pid_str() memory leak in error path
perf tools: Do not use _FORTIFY_SOURCE when DEBUG=1 is specified
tools lib traceevent: Fix signature of create_arg_item()
tools lib traceevent: Use proper function parameter type
tools lib traceevent: Fix freeing arg on process_dynamic_array()
tools lib traceevent: Fix a possibly wrong memory dereference
tools lib traceevent: Fix a possible memory leak
tools lib traceevent: Allow expressions in __print_symbolic() fields
perf evlist: Explicititely initialize input_name
...
Some Distributions may lack "less" package being included by default,
e.g., Linaro nano rootfs. In those cases use the portable "pager"
command instead of "less".
Signed-off-by: Avik Sil <avik.sil@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338287725-26382-1-git-send-email-avik.sil@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The patch series that introduced the top level tools/ makefile and the
libtraceevent broke this feature where files needed to build in a
detached tarball were not included in the MANIFEST file and thus not
included in the tarball.
Fix it by adding the relevant files to the MANIFEST.
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-z3mjj74927xvqwhlmu18kj80@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
$ perf script -i /tmp/perf.data
...
gcc 13623 544315.062858: context-switches:
ffffffff815f65c9 __schedule ([kernel.kallsyms])
ffffffff81087cea __cond_resched ([kernel.kallsyms])
ffffffff815f6b92 _cond_resched ([kernel.kallsyms])
ffffffff815fb87a do_page_fault ([kernel.kallsyms])
ffffffff815f8465 page_fault ([kernel.kallsyms])
2b7a71ea0303 _dl_lookup_symbol_x ([kernel.kallsyms])
2b7a71ea1eb5 _dl_relocate_object ([kernel.kallsyms])
2b7a71e99b2e dl_main ([kernel.kallsyms])
2b7a71eab7f4 _dl_sysdep_start ([kernel.kallsyms])
All DSO's in a callchain are printed as [kernel.kallsyms].
git bisect chased it to:
547a92e0ae is the first bad commit
commit 547a92e0ae
Author: Akihiro Nagai <akihiro.nagai.hw@hitachi.com>
Date: Mon Jan 30 13:42:57 2012 +0900
perf script: Unify the expressions indicating "unknown"
The perf script command uses various expressions to indicate "unknown".
It is unfriendly for user scripts to parse it. So, this patch unifies
the expressions to "[unknown]".
Looks like a copy-paste in that the other references use al.map but this one
should be node->map.
With this patch you get:
$ perf script -i /tmp/perf.data
...
gcc 13623 544315.062858: context-switches:
ffffffff815f65c9 __schedule ([kernel.kallsyms])
ffffffff81087cea __cond_resched ([kernel.kallsyms])
ffffffff815f6b92 _cond_resched ([kernel.kallsyms])
ffffffff815fb87a do_page_fault ([kernel.kallsyms])
ffffffff815f8465 page_fault ([kernel.kallsyms])
2b7a71ea0303 _dl_lookup_symbol_x (/lib64/ld-2.14.90.so)
2b7a71ea1eb5 _dl_relocate_object (/lib64/ld-2.14.90.so)
2b7a71e99b2e dl_main (/lib64/ld-2.14.90.so)
2b7a71eab7f4 _dl_sysdep_start (/lib64/ld-2.14.90.so)
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Akihiro Nagai <akihiro.nagai.hw@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1338353906-60706-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When no event is specified the tools use perf_evlist__add_default(), that will
call event_attr_init to initialize the KVM exclusion bits.
When the change was made to the tools so that by default guest samples would be
excluded, the changes were made just to the parsing routines and to
perf_evlist__add_default(), not to perf_evlist__add_attrs, that is used so far
just by perf stat to add multiple events, according to the level of detail
specified.
Recently the tools were changed to reconstruct the event name from all the
details in perf_event_attr, not just from .type and .config, but taking into
account all the feature bits (.exclude_{guest,host,user,kernel,etc},
.precise_ip, etc).
That is when we noticed that the default for perf stat wasn't the one for the
rest of the tools, i.e. the .exclude_guest bit wasn't being set.
I.e. the default, that doesn't call event_attr_init was showing the :HG
modifier:
$ perf stat usleep 1
Performance counter stats for 'usleep 1':
0.942119 task-clock # 0.454 CPUs utilized
1 context-switches # 0.001 M/sec
0 CPU-migrations # 0.000 K/sec
126 page-faults # 0.134 M/sec
693,193 cycles:HG # 0.736 GHz [40.11%]
407,461 stalled-cycles-frontend:HG # 58.78% frontend cycles idle [72.29%]
365,403 stalled-cycles-backend:HG # 52.71% backend cycles idle
465,982 instructions:HG # 0.67 insns per cycle
# 0.87 stalled cycles per insn
89,760 branches:HG # 95.275 M/sec
6,178 branch-misses:HG # 6.88% of all branches
0.002077228 seconds time elapsed
While if one explicitely specifies the same events, which will make the parsing code
to be called and thus event_attr_init is called:
$ perf stat -e task-clock,context-switches,migrations,page-faults,cycles,stalled-cycles-frontend,stalled-cycles-backend,instructions,branches,branch-misses usleep 1
Performance counter stats for 'usleep 1':
1.040349 task-clock # 0.500 CPUs utilized
2 context-switches # 0.002 M/sec
0 CPU-migrations # 0.000 K/sec
127 page-faults # 0.122 M/sec
587,966 cycles # 0.565 GHz [13.18%]
459,167 stalled-cycles-frontend # 78.09% frontend cycles idle
390,249 stalled-cycles-backend # 66.37% backend cycles idle
504,006 instructions # 0.86 insns per cycle
# 0.91 stalled cycles per insn
96,455 branches # 92.714 M/sec
6,522 branch-misses # 6.76% of all branches [96.12%]
0.002078681 seconds time elapsed
Fix it by introducing a perf_evlist__add_default_attrs method that will call
evlist_attr_init in all the perf_event_attr entries before adding the events.
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4eysr236r0pgiyum9epwxw7s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its 'H', not 'h'. The later is for getting to the help window.
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7zvwphhm815y2zczoxgstzuf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In non symbolic views, i.e. --sort without "symbol", as in:
perf report --sort comm
We're segfaulting in the --tui because we're testing the symbol resolved
and then trying to use the symbol on the histogram entry where we're
coalescing all hits for a COMM, and the first hist_entry for a comm may
have a NULL symbol, i.e. the RIP didn't resolve to any symbol.
In this case we're segfaulting, fix it by testing against the symbol in
the histogram entry.
Reported-by: William Cohen <wcohen@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8ylwubbcmu27ucc9ffrku3yv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge back Linus's latest branch so that we pick up the uprobes changes.
( I tested this branch locally and while it's one from the middle of the
merge window it's a good one to base further work off. )
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Stop using this python/OOP convention, doesn't really helps. Will do
more from time to time till we get it cleaned up in all of /perf.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5dyxyb8o0gf4yndk27kafbd1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For annotate I want to be able to have variables that are the same as
the ones representing feature toggles.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7rhhf6m0a72p2wja4tgv1itg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that when navigating to another function from a call site or when
going to another annotation browser thru the main report/top browser the
options (hide source code, jump arrows, jumpy lines, etc) remains the
last ones selected.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0h0tah1zj59p01581snjufne@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When hide_src_view is true we can't use browser_disasm_line->idx, that
takes into account also non asm lines, we must use browser_disasm_line->idx_asm
instead, otherwise we may end up with an index after the number of
entries, oops, fix it.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-o1szpyjh3z87yi0n6x0cr8uu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Compiling page-type.c with a recent compiler produces many warnings,
mostly related to signed/unsigned comparisons. This patch cleans up most
of them.
One remaining warning is about an unused parameter. The <compiler.h> file
doesn't define a __unused macro (or the like) yet. This can be addressed
later.
Signed-off-by: Ulrich Drepper <drepper@gmail.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Programs using /proc/kpageflags need to know about the various flags. The
<linux/kernel-page-flags.h> provides them and the comments in the file
indicate that it is supposed to be used by user-level code. But the file
is not installed.
Install the headers and mark the unstable flags as out-of-bounds. The
page-type tool is also adjusted to not duplicate the definitions
Signed-off-by: Ulrich Drepper <drepper@gmail.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There were places where use ui__warning (or even fprintf) to show
critical messages. This patch converts them to ui__error so that the
front-end code can implement appropriate behavior.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338265382-6872-3-git-send-email-namhyung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit dc41b9b8f0 ("perf ui: Change fallback policy of
setup_browser") changed default behavior of the function but missed
setting the use_browser variable to 0 accidently. So perf report ends up
doing nothing in such cases. Fix it.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1338216802-5675-1-git-send-email-namhyung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
