[Why]
The flip and full structures were allocated but never freed.
[How]
Free them at the end of the function. There's a small behavioral
change here with the function returning early if the allocation fails
but we wouldn't should be doing anything in that case anyway.
Fixes: c00e0cc0fdc0 ("drm/amd/display: Call into DC once per multiplane flip")
Fixes: ea39594e0855 ("drm/amd/display: Perform plane updates only when needed")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enhanced sync need to use vertical_interrupt1.
[How]
Add vertical_interrupt1 source to irq manger,
Implment setup vline interrupt interface.
Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During any modeset the CRTC stream is removed and a new stream is added.
This new stream doesn't carry over CRC capture state if it was
previously set.
[How]
Re-program the stream for CRC capture. The existing DRM callback can
be re-used here for the most part - the only modification needed is
additional locking now that it's called from within commit tail.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In order to read CRC events when CRC capture is enabled the vblank
interrput handler needs to be running for the CRTC. The handler is
enabled while there is an active vblank reference.
When running IGT tests there will often be no active vblank reference
but the test expects to read a CRC value. This is valid usage (and
works on i915 since they have a CRC interrupt handler) so the reference
to the vblank should be grabbed while capture is active.
This issue was found running:
igt@kms_plane_multiple@atomic-pipe-b-tiling-none
The pipe-b is the only one in the initial commit and was not previously
active so no vblank reference is grabbed. The vblank interrupt is
not enabled and the test times out.
[How]
Keep a reference to the vblank as long as CRC capture is enabled.
If userspace never explicitly disables it then the reference is
also dropped when removing the CRTC from the context (stream = NULL).
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On current design, driver cannot handle the interrupt for
down reply when link training is processing. The DOWN REQ
send before link training will keep in the pending DOWN REP
state in the queue.
It makes the next DOWN REQ be queued until time out.
[How]
To add a polling sequence before clear payload allocation table
to make sure the pending DOWN REP can be handled.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
arch/x86/Makefile disables SSE and SSE2 for the whole kernel. The
AMDGPU drivers modified in this patch re-enable SSE but not SSE2. Turn
on SSE2 to support emitting double precision floating point instructions
rather than calls to non-existent (usually available from gcc_s or
compiler_rt) floating point helper routines.
Link: https://gcc.gnu.org/onlinedocs/gccint/Soft-float-library-routines.html
Link: https://github.com/ClangBuiltLinux/linux/issues/327
Cc: stable@vger.kernel.org # 4.19
Reported-by: S, Shirish <Shirish.S@amd.com>
Reported-by: Matthias Kaehlcke <mka@google.com>
Suggested-by: James Y Knight <jyknight@google.com>
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] After call bios table crtc_source_select, dal will program fmt
again. The bios table program dig_source_select and other fmt register
for bios usage which is redundancy and uncessary.
[How] Program dig_soruce_select register directly
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Previously we incorrectly skipped backlight control when stream is
present but dpms_off = true. This causes backlight to remain on in
the we boot up or resume into a external display only configuration
where VBIOS posted on the eDP.
[How]
Add dpms_off into the condition for edp need to turn off.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This change causes regression for S4 resume where gamma is not
programmed. The change incorrectly updates the requested dpms_off
state.
This reverts commit d2b1d6bbc5.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Improved contrast in ABM 2.2 is desired
[How]
Increase the contrast factor for ABM levels 2, 3 and 4
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] Our output TF calculation doesn't work if no user-specified gamma
correction. Normally, user provides this, but driver sohuld just assume
default (linear) gamma otherwise.
[How] Remove output TF dependency on user gamma being provided.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
An uninitialized variable would randomly initialize to a large
value. This caused enough delay to fail DP Compliance Test 400.2.1.
[How]
Initialize the variable.
Signed-off-by: John Barberiz <John.Barberiz@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need method of detecting which version of the DMCU FW is loaded and
load the appropriate iRAM.
[How]
Create definition for ABM 2.2 iRAM, and load it if the DMCU FW version
number matches the ABM 2.2 version; otherwise load ABM 2.1 iRAM.
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current date based versioning doesn't tell us about feature version
and build version, and is not useful for debug.
[How]
Add versioning based on feature and build
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We were assuming that any commit with allow_modeset == false
was a pageflip. This was against drm intention and only
worked by sheer luck
[How]
A pageflip is the change from one framebuffer to another
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Our old logic: if pageflip, update freesync and plane address.
Otherwise, update everything.
This over-updated on non-pageflip cases, and it failed to
update if pageflip and non-pageflip changes occurred on
the same commit
[How]
Update flip_addrs on pageflips.
Update scaling_info when it changes.
Update color fields on color changes.
Updates plane_info always because we don't have a good way of
knowing when it needs to be updated.
Unfortunately, this means that every stream commit involves two
calls into DC. In particular, on pageflips there is a second,
pointless update that changes nothing but costs several
microseconds (about a 50% increase in time taken). The update is
fast, but there are comparisons and some useless programming.
Leave TODOs indicating dissatisfaction.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
amdgpu_dm_commit_planes was performing multi-plane
flips incorrectly:
It waited for vblank once per flipped plane
It prepared flip ISR and acquired the corresponding vblank ref
once per plane, although it closed ISR and put the ref once
per crtc
It called into dc once per flipped plane, duplicating some work
[How]
Wait for vblank, get vblank ref, prepare flip ISR, and call into
DC only once, and only if there is a pageflip
Make freesync continue to update planes even if vrr information
has already been changed
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Underscan and ABM are connector properties but require updates
to DC stream state. Previously, on updates to these properties
the affected stream and all its planes were committed.
This is unnecessary; only a few fields on the stream need
to be changed.
[How]
If scaling or ABM have changed, change the stream and
create a stream update with those changes. Call
DC with only those fields.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC was assuming that any surface_update->scaling_info
meant the update was at least medium. However, if nothing
has changed there is no scaling to program, so there is
no problem with the update being fast
[How]
If every update flag is not set, the update is fast
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Virtual memory allows display to support flipping to surfaces which
are not allocated contiguously in memory with physical addresses,
instead a 1-4 level page table is used.
This is beneficial because it allows the scattering of large surfaces
to improve memory efficiency and security.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Change DCN10 hubbub to use hubbub as a base and allow all future DCN
hubbubs to do the same instead of using DCN10_hubbub. This increases
readability and doesn't require future hubbubs to inherit anything
other than the base hubbub struct.
[How]
Create separate DCN10_hubbub struct which uses the hubbub struct as
a base.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For fastboot, Bios will light up eDP before SW driver is loaded. SW
driver will check if eDP is lit by bios through reading the
BIOS_SCRATCH_3 register. If lit, SW driver will not power down eDP
power and phy to save time.
Definition of BIOS_SCRATCH_3 are missing for pre-raven asic. This
causes eDP fast boot to not work property. For some eDP panels, even
if dp tx sends NoVideoStream_flag =1 and dpcd 0x600=2, eDP rx may not
handle properly. This may cause a short flash on screen.
[How] Add definition of BIOS_SCRATCH_3 for all asic
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Yongqiang Sun <yongqiang.sun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the gfxclk for SMU11 can have at most 16 discrete levels.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace kzalloc() function with its 2-factor argument form, kcalloc().
This patch replaces cases of:
kzalloc(a * b, gfp)
with:
kcalloc(a, b, gfp)
Also, improve the coding style and the use of sizeof during
allocation by changing sizeof(struct dc_surface_update) and
sizeof(struct dc_plane_state) to sizeof(*updates) and
sizeof(*surfaces), correspondingly.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes printing clock names in cases like:
[ 5.352311] [drm] DM_PPLIB: values for Invalid clock
[ 5.352313] [drm] DM_PPLIB: 400000 in kHz
[ 5.352313] [drm] DM_PPLIB: 933000 in kHz
[ 5.352314] [drm] DM_PPLIB: 1067000 in kHz
[ 5.352315] [drm] DM_PPLIB: 1200000 in kHz
[ 5.352317] [drm] DM_PPLIB: values for Invalid clock
[ 5.352318] [drm] DM_PPLIB: 300000 in kHz
[ 5.352318] [drm] DM_PPLIB: 600000 in kHz
[ 5.352319] [drm] DM_PPLIB: 626000 in kHz
[ 5.352320] [drm] DM_PPLIB: 654000 in kHz
(source: HP EliteBook 745 G5 w. RAVEN 0x1002:0x15DD 0x103C:0x83D5 0xD1)
On my system above "Invalid" names got replaced by "F" and "DCF".
The same problem was occurring on Huawei Matebook D with just 667000 kHz
instead of 400000 kHz.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to check if crtc state is changed so that mode set is
required before trying to create new stream.
It deals with the MST hotplug use case when plug back to the
same connector where the failure to create new stream for the
inactive crtc on the old connector.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
[Why]
Backlight is conceptually a property of links, not streams.
All backlight programming is done on links, but there is a
stream property bl_pwm_level that is used to restore backlight
on dpms on and s3 resume. This is unnecessary, as backlight
is already restored by hardware with no driver intervention.
[How]
Remove bl_pwm_level, and the stream argument to set_backlight
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=109375
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 923fe49512)
[Why]
The cursor vanishes when touching the top of edge of the screen for
Raven on Linux.
This occurs because the cursor height is not taken into account when
deciding to disable the cursor.
[How]
Factor in the cursor height into the cursor calculations - and mimic
the existing x position calculations.
Fixes: 94a4ffd1d4 ("drm/amd/display: fix PIP bugs on Dal3")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Hotplug on raven results in REG_WAIT_TIMEOUT warning
due to failing attempt to lock disabled otg for the hubp
interdependent pipes programming.
[How]
Don't setup pipe interdependencies for disabled otg.
Also removed the unnecessary duplicate logic checks.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
PPLIB not receive the PME when unplug.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This fixes a stuttering issue that occurs when moving a hardware cursor
when VRR is enabled.
Previously when VRR is enabled atomic check will grab the connector
state for every atomic update. This has to lock the connector in order
to do so. The locking is bad enough by itself for performance, but
it gets worse with what we do just below that - add all the planes
for the CRTC to the commit.
This prevents the cursor fast path from working - there's more than one
plane now. With state->allow_modeset = true on top of this, it also
adds and removes all the planes from the DC context triggering a full
(very slow) update in DC.
[How]
We need the connector state to get the VRR min/max capbilities, but we
only need them when there's a CRTC mode change or when VRR is toggled.
The condition has been updated accordingly.
Fixes: 3cc22f281318 ("drm/amdgpu: Set FreeSync state using drm VRR properties")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When the DMCU's iRAM definition was moved to the newly created
power_helpers, a #pragma pack was lost, causing the iRAM to be misaligned
[How]
Restore the #pragma pack
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a follow up to:
e28e1490794d ("drm/amd/display: Remove i2caux folder")
Some files were still left, so delete all of them.
CC: David Francis <David.Francis@amd.com>
CC: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Wjy&How] Some stress test is causing unexpected memory allocation
failure. This prevents null dereference but there will likely be problems
later, hard to gracefully handle memalloc fail for critical objects.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Reza Amini <Reza.Amini@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if VERT_FILTER_INIT_BOT and BLACK_OFFSET registers
exists in the DCN SCL IP block before trying to access.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modify freesync module to build VTEM infopackets when in HdmiVRR mode
Signed-off-by: Bayan Zabihiyan <Bayan.Zabihiyan@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On DCN1, there is an issue where on high BW config on single channel
systems, underflow will be observed if DCC is disabled. This issue
can be observed on several use cases. For this particular case,
it is observed when playing 4k video on 4k desktop with video downscaled
to a certain size.
[How]
Block MPO for this particular case, this will prevent extra BW consumed
from downscaling, working around the underflow.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DP compliance box shows wrong MSA data.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Hotplug on raven results in REG_WAIT_TIMEOUT warning
due to failing attempt to lock disabled otg for the hubp
interdependent pipes programming.
[How]
Don't setup pipe interdependencies for disabled otg.
Also removed the unnecessary duplicate logic checks.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY] clarify dal input parameters to pplib interface, remove
un-used parameters. dal knows exactly which parameters needed
and their effects at pplib and smu sides.
current dal sequence for dcn1_update_clock to pplib:
1.smu10_display_clock_voltage_request for dcefclk
2.smu10_display_clock_voltage_request for fclk
3.phm_store_dal_configuration_data {
set_min_deep_sleep_dcfclk
set_active_display_count
store_cc6_data --- this data never be referenced
new sequence will be:
1. set_display_count --- need add new pplib interface
2. set_min_deep_sleep_dcfclk -- new pplib interface
3. set_hard_min_dcfclk_by_freq
4. set_hard_min_fclk_by_freq
after this code refactor, smu10_display_clock_voltage_request,
phm_store_dal_configuration_data will not be needed for rv.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It is huge, unmaintainable, needlessly layered, and obsolete
[How]
Remove it. All of it. Also remove the i2caux struct in
dc_context and the code that created and destructed it
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The aux_engine struct is needlessly complex and
is defined multiple times. It contains function pointers
that each have only one version and are called only from
inside dce_aux.
[How]
Replace aux_engine with a new struct called dce_aux.
Remove all function pointers and call functions directly.
Remove unused functions
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The old aux interface goes through i2caux and the aux_engine
and engine function pointers. The multiple layers of indirection
make it hard to tell waht is happening. The aux algorithm
does not need to be this complicated: attempt to submit the
request. If you get an ack (reply = 0), stop. Otherwise,
retry, up to 7 times.
[How]
Add a new helper function in dce_aux that performs aux retries
Move the plumbing of the aux calling code into dce_aux
Add functions in ddc that redirect directly to dce_aux
Make all aux calls use these functions
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
aux_payload should be the struct used inside dc to start
aux transactions. This will allow the old aux interface
to be seamlessly replaced.
[How]
Add three fields to aux_payload: reply, mot, defer_delay
This will mean that aux_payload has all data required
to submit a request. Shift dc_link to use this struct
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The cursor vanishes when touching the top of edge of the screen for
Raven on Linux.
This occurs because the cursor height is not taken into account when
deciding to disable the cursor.
[How]
Factor in the cursor height into the cursor calculations - and mimic
the existing x position calculations.
Fixes: 94a4ffd1d4 ("drm/amd/display: fix PIP bugs on Dal3")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If eDP ver >= 1.4,
the Source device must use LINK_RATE_SET.
[How]
Get LINK_RATE_SET by reading DPCD 10h-1fh,
then write DPCD 00115h before link training.
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In certain scenarios the ramp parameter come in as NULL, which crashes
because this function doesn't guard properly in the early return.
[How]
- parameter mapUserRamp should be the guard (false means no ramp)
- remove checking ramp in early return
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com>
Acked-by: Eryk Brol <Eryk.Brol@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
To resume system before entering S0i3 completely will cause PSP not
reload DMCU FW since there is not HW power state change.
In this case, driver cannot get correct DMCU version from IRAM
since driver override it and DMCU didn't reload to update it.
It makes driver return false in dcn10_dmcu_init().
[how]
1.To redefine DMCU_SCRATCH to identify different DMCU state.
2.To reserve IRAM 0xF0~0xFF write by DMCU only.
3.To remove dcn10_get_dmcu_state
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
PPLIB not receive the PME when unplug.
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
separate register access from logic to allow us abstract register sequences
[how]
consolidate mask and value first then apply to register.
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 717276b925.
The reverted patch was a workaround that addressed an issue fixed by:
4364bcb2cd ("drm: Get ref on CRTC commit object when waiting for
flip_done")
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
1-Test equipment does not reset test automation flag after completing
current test causing the next test to fail.
2.When test request is empty, we shouldn't ack the test.
[How]
1-Driver should always clear test equipment automation test request
when request is completed.
2-Driver should clear test equipement test automation if driver does
not complete the request.
Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When the DMCU's iRAM definition was moved to the newly created
power_helpers, a #pragma pack was lost, causing the iRAM to be misaligned
[How]
Restore the #pragma pack
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The driver will crash on dce hardware due to a null function pointer.
[How]
- bring back "program_csc_matrix" functionality as "program_output_csc" for
dce110
- dce110 doesn't use the "opp_id" parameter, so use 0 when there's no hubp
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This fixes a stuttering issue that occurs when moving a hardware cursor
when VRR is enabled.
Previously when VRR is enabled atomic check will grab the connector
state for every atomic update. This has to lock the connector in order
to do so. The locking is bad enough by itself for performance, but
it gets worse with what we do just below that - add all the planes
for the CRTC to the commit.
This prevents the cursor fast path from working - there's more than one
plane now. With state->allow_modeset = true on top of this, it also
adds and removes all the planes from the DC context triggering a full
(very slow) update in DC.
[How]
We need the connector state to get the VRR min/max capbilities, but we
only need them when there's a CRTC mode change or when VRR is toggled.
The condition has been updated accordingly.
Fixes: 3cc22f281318 ("drm/amdgpu: Set FreeSync state using drm VRR properties")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To reduce indent in dm_update_crtcs, and to make it operate on single
instances.
[How]
Move iteration of plane states into atomic_check.
No functional change is intended.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To reduce indentation of dm_update_planes, and to make it operate on
single plane instances.
[How]
Move iteration of plane states into atomic_check.
No functional change is intended.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix boolean expression by using logical AND operator '&&'
instead of bitwise operator '&'.
This issue was detected with the help of Coccinelle.
Fixes: 6d04ee9dc1 ("drm/amd/display: Restructuring and cleaning up DML")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Hardware support for Delta Color Compression (DCC) decompression is
available in DC for GFX9 but there's no way for userspace to enable
the feature.
Enabling the feature can provide improved GFX performance and
power savings in many situations.
[How]
The GFX9 DCC parameters are passed to amdgpu_dm from AMDGPU via the
amdgpu_bo tiling_flags. The plane capability is queried and the
parameters are set accordingly.
The DCC address is given via a 256 byte aligned offset on the
framebuffer address. The DCC address is updated whenever the buffer
address changes.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
32-bit builds break when doing 64-bit division directly.
[How]
Use the div_u64() function instead to perform the division.
Fixes: https://lists.freedesktop.org/archives/dri-devel/2018-December/201008.html
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initializing structures with { } is known to be problematic since
it doesn't necessararily initialize all bytes, in case of padding,
causing random failures when structures are memcmp().
This patch fixes the structure initialisation related compiler
error by memset.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For more informative debugging.
[How]
Add timing generator and PLL ids to output, to make it clear which pixel
clock is being set.
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove reg_helper.h which is included more than once
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove custom_float.h which is included more than once
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove custom_float.h which is included more than once
Acked-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are several variables that are defined and never used and hence can
be removed. Remove them. Cleans up clang -Wunused-const-variable warnings:
warning: ‘dvi_hdmi_dongle_signature_str’ defined but not used
warning: ‘dce11_one_lpt_channel_max_resolution’ defined but not used
warning: ‘ddc_hw_status_addr’ defined but not used
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The function dc_commit_updates_for_stream had a parameter called
plane_states. It was never used. It was getting in the way
of some cleanup work
[How]
Remove it
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will allow us to program dscclk to required value
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
PPLib has impelemented the new pp_smu interface
[How]
Use the new functions if available instead of the old interface
'set_display_requirement' and 'dcn1_pplib_apply_display_requirements'.
Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com>
Reviewed-by: Fatemeh Darbehani <Fatemeh.Darbehani@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Su Chung <Su.Chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When XGMI is enabled, we need to adjust the dprefclk according to the
WAFL link's spread spectrum info. This is for VG20 (DCE121) only.
[How]
dce_clk_mgr already stores SS info, currently being used by audio clock.
Therefore, patch the clk_mgr's SS info with the xGMI SS info, if xGMI
is enabled. For display clock, adjust it during dce12_update_clocks()
before calling set_clock().
Since we rely on a mmhub register to reliably determine if xGMI is
enabled, the patching step needs to happen after resource_construct()
has initialized the hardware sequencer.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This fixes an regression introduced by:
drm/amd/display: add stream ID and otg instance in dc_stream_state
During driver initialization, a null pointer deref is raised. This is
caused by searching for a stream status in the dc->current_state before
the dc_state swap happens at the end of dc_commit_state_no_check().
Since the swap has not happened, the dc_state to be swapped in should
be searched, and not dc->current_state.
[How]
Add a function that searches for the stream status within the given
dc_state, instead of dc->current_state. Use that before the state swap
happens in dc_commit_state_no_check().
Also remove duplicate occurrences of this function in amdgpu_dm.c.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
context->bw.dce.dispclk_khz is being cached into unpatched_clock, then
restored at end of function call. This is needlessly complex
[How]
Instead, use a local patched_clock variable. Leave
context->bw.dce.dispclk_khz alone.
No functional change is intended.
Signed-off-by: David Francis <david.francis@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are different reasons for Validation failure error during
atomic_check
[How]
Add better logging of the reason for validation failure
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Users would like more accurate pixel clocks, especially for fractional
"TV" frame rates like 59.94 Hz.
[How]
Store and communicate pixel clocks with 100 Hz accuracy from
dc_crtc_timing through to BIOS command table setpixelclock call.
Signed-off-by: Ken Chalmers <ken.chalmers@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
There is an extra null check for fs_params in the
build_freesync_hdr function detected by Smatch.
[HOW]
1) Remove the extra null check since it is checked in the
caller.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's not being used anywhere.
[How]
Remove it.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
ABM enablement testing can be automated if a way of reading
target and current hardware backlight is available
[How]
Expand debugfs interface with two new entries.
Hook directly into dc interface. Units are as
a fraction of 0x1000 = 100%
Use the built-in amdgpu function for creating
read-only debugfs files
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
stream ID allows DMs to avoid memory address comparisons to compare
stream equality.
otg_instance allows DC to more rigorously define when otg_instance
can change. specifically, it is now defined to be only mutable when dc_stream_state
changes. This is better than a "get status" function which prevents efficient
caching of otherwise very stable information.
[how]
stream ID follows similar pattern to sink ID, which is already implemented
otg_instance is an output which occurs on all dc_stream modification functions
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DV have made updates to DCN dml which we need to pull in
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Backlight is conceptually a property of links, not streams.
All backlight programming is done on links, but there is a
stream property bl_pwm_level that is used to restore backlight
on dpms on and s3 resume. This is unnecessary, as backlight
is already restored by hardware with no driver intervention.
[How]
Remove bl_pwm_level, and the stream argument to set_backlight
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They're not being used, so remove them.
Signed-off-by: Imad Syed <imad.syed@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
dc_stream_state containing a pointer to sink is poor design.
Sink describes the display, and the specifications or capabilities
it has. That information is irrelevant for dc_stream_state, which describes
hardware state, and is generally used for hardware programming. It
could further be argued that dc_sink itself is just a convenience dc
provides, and DC should be perfectly capable of programming hardware
without any dc_sinks (for example, emulated sinks).
[how]
Phase 1:
Deprecate use of dc_sink pointer in dc_stream. Most references are trivial
to remove, but some call sites are risky (such as is_timing_changed) with
no obvious logical replacement. These will be removed in follow up change.
Add dc_link pointer to dc_stream. This is the typical reason DC really needed
sink pointer, and most call sites are replaced with this.
DMs also need minor updates, as all 3 DMs leverage stream->sink for
some functionality. this is replaced instead by a pointer to private data
inside dc_stream_state, which is used by DMs as a quality of life improvment
for some key functionality. it allows DMs to set pointers have to their own objects
which associate OS objects to dc_stream_states (such as DisplayTarget
and amdgpu_dm_connector). Without the private pointer, DMs would be
forced to perform a lookup for callbacks.
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
So that we can adjust fclk for debugging purposes.
[How]
Add option to force adjust fclk request to pplib.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There was a recent fix in the BW spreadsheet to allow timing with very
large vblank. Need to be ported into driver.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We are not correctly handling the wrap around case.
VLine interrupt is relative to position of VUpdate interrupt.
Both VUpdate interrupt and VLine interrupt could possibly
be in front porch or back porch.
[How]
Fix wraparound case by checking for line number that is
greater than the VTOTAL of the OTG timing. In this case,
the interrupt should occur on the next frame.
Also fix some variable naming and remove some dead code.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver didn't check plane size and surface size is mismatch.
It will cause pitch data incorrect.
[How]
Add condition to check is plane change and update surface
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some components depend on dc to constuct
but need to assign callback functions to dc.
[how]
Instead of assigning dc callback functions in dc_create,
decouple the callback init to a standlone function after dc_create. This
is currently a no-op.
Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove braces around single-line conditionals
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To make sure future changes in DAL for SMU msgs will not change the current behaviour
and to make sure clock registeres are programmed correctly based on SMU msgs
that DAL sends.
Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Yongqiang Sun <yongqiang.sun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1) Rename and make public definition of input CSC matrix struct.
2) Make wm_read_state() function an interface of hubbub, and check
if watermark registers exist before read/write to them.
3) Check if OTG_INTERLACE_CONTROL register exists before updating
4) Add dummy functions for set_input/output_transfer function to avoid
errors due to differences in CM registers.
5) Added missing register field definition in header file
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose this function for future use.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
