My heuristic for detecting type 1 DVI DP++ adaptors based on the VBT
port information apparently didn't survive the reality of buggy VBTs.
In this particular case we have a machine with a natice HDMI port, but
the VBT tells us it's a DP++ port based on its capabilities.
The dvo_port information in VBT does claim that we're dealing with a
HDMI port though, but we have other machines which do the same even
when they actually have DP++ ports. So that piece of information alone
isn't sufficient to tell the two apart.
After staring at a bunch of VBTs from various machines, I have to
conclude that the only other semi-reliable clue we can use is the
presence of the AUX channel in the VBT. On this particular machine
AUX channel is specified as zero, whereas on some of the other machines
which listed the DP++ port as HDMI have a non-zero AUX channel.
I've also seen VBTs which have dvo_port a DP but have a zero AUX
channel. I believe those we need to treat as DP ports, so we'll limit
the AUX channel check to just the cases where dvo_port is HDMI.
If we encounter any more serious failures with this heuristic I think
we'll have to have to throw it out entirely. But that could mean that
there is a risk of type 1 DVI dongle users getting greeted by a
black screen, so I'd rather not go there unless absolutely necessary.
v2: Remove the duplicate PORT_A check (Daniel)
Fix some typos in the commit message
Cc: Daniel Otero <daniel.otero@outlook.com>
Cc: stable@vger.kernel.org
Tested-by: Daniel Otero <daniel.otero@outlook.com>
Fixes: d61992565b ("drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97994
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478884464-14251-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The term "preliminary hardware support" has always caused confusion both
among users and developers. It has always been about preliminary driver
support for new hardware, and not so much about preliminary hardware. Of
course, initially both the software and hardware are in early stages,
but the distinction becomes more clear when the user picks up production
hardware and an older kernel to go with it, with just the early support
we had for the hardware at the time the kernel was released. The user
has to specifically enable the alpha quality *driver* support for the
hardware in that specific kernel version.
Rename preliminary_hw_support to alpha_support to emphasize that the
module parameter, config option, and flag are about software, not about
hardware. Improve the language in help texts and debug logging as well.
This appears to be a good time to do the change, as there are currently
no platforms with preliminary^W alpha support.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477909108-18696-1-git-send-email-jani.nikula@intel.com
Since there's no opregion in vgpu so clear the opregion bits in case
guest access it.
Signed-off-by: Xiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Add more MMIO regs with command access flag for whitelist as they are
accessed by command.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Static checker gave warning on:
drivers/gpu/drm/i915/gvt/edid.c:506 intel_gvt_i2c_handle_aux_ch_write()
warn: odd binop '0x0 & 0xff'
We try to return ACK for I2C reply which is defined with 0. Remove
bit shift which caused misleading bit op.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Gvt gdrst handler handle_device_reset() invoke function
setup_vgpu_mmio() to reset mmio status. In this case,
the virtual mmio memory has been allocated already. The
new allocation just cause old mmio memory leakage.
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We initiate vgpu->workload_q_head via for_each_engine
macro which may skip unavailable engines. So we should
follow this rule anywhere. The function
intel_vgpu_reset_execlist is not aware of this. Kernel
crash when touch a uninitiated vgpu->workload_q_head[x].
Let's fix it by using for_each_engine_masked and skip
unavailable engine ID. Meanwhile rename ring_bitmap to
general name engine_mask.
v2: remove unnecessary engine activation check (zhenyu)
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Emulate right behavior for tlb_control, set to ZERO upon write.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
It's a classical abba type deadlock when using 2 mutex objects, which
are gvt.lock(a) and drm.struct_mutex(b). Deadlock happens in threads:
1. intel_gvt_create/destroy_vgpu: P(a)->P(b)
2. workload_thread: P(b)->P(a)
Fix solution is align the lock acquire sequence in both threads. This
patch choose to adjust the sequence in workload_thread function.
This fixed lockup symptom for guest-reboot stress test.
v2: adjust sequence in workload_thread based on zhenyu's suggestion.
adjust sequence in create/destroy_vgpu function.
v3: fix to still require struct_mutex for dispatch_workload()
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
[zhenyuw: fix unused variables warnings.]
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The function's behaviour was changed in 90844f0004, without changing
its signature, causing people to keep using it the old way without
realising they were now leaking memory.
Rob Clark also noticed it was also allocating GFP_KERNEL memory in
atomic contexts, breaking them.
Instead of having to allocate GFP_ATOMIC memory and fixing the callers
to make them cleanup the memory afterwards, let's change the function's
signature by having the caller take care of the memory and passing it to
the function.
The new parameter is a single-field struct in order to enforce the size
of its buffer and help callers to correctly manage their memory.
Fixes: 90844f0004 ("drm: make drm_get_format_name thread-safe")
Cc: Rob Clark <robdclark@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Sinclair Yeh <syeh@vmware.com> (vmwgfx)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161112011309.9799-1-eric@engestrom.ch
When we release the shmem backing storage, we make sure that the pages
are coherent with the cpu cache. However, our clflush routine was
skipping the flush as the object had no pages at release time. Fix this by
explicitly flushing the sg_table we are decoupling.
Fixes: 03ac84f183 ("drm/i915: Pass around sg_table to get_pages/put_pages backend")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161111145809.9701-2-chris@chris-wilson.co.uk
After this patch only conversion of INTEL_INFO(p)->gen to
INTEL_GEN(dev_priv) remains before the __I915__ macro can
be removed.
v2: Tidy vlv_compute_wm. (David Weinehall)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
A small selection of macros which can only accept dev_priv from
now on and a resulting trickle of fixups.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
A small selection of macros which can only accept dev_priv from
now on and a resulting trickle of fixups.
v2: Keep original order. (Ville Syrjala)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
A small selection of macros which can only accept dev_priv from
now on and a resulting trickle of fixups.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
As a side product, had to split two other files;
- i915_gem_fence_reg.h
- i915_gem_object.h (only parts that needed immediate untanglement)
I tried to move code in as big chunks as possible, to make review
easier. i915_vma_compare was moved to a header temporarily.
v2:
- Use i915_gem_fence_reg.{c,h}
v3:
- Rebased
v4:
- Fix building when DEBUG_GEM is enabled by reordering a bit.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478861034-30643-1-git-send-email-joonas.lahtinen@linux.intel.com
Once we've determined that the sink is MST capable we never end up
running through the full detect cycle again, despite getting HPDs.
Fix tht by ripping out the incorrect piece of code responsible.
This got broken when I moved the long HPD handling to the ->detect()
hook, but failed to remove the leftover code.
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Cc: Rui Tiago Matos <tiagomatos@gmail.com>
Tested-by: Rui Tiago Matos <tiagomatos@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98323
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
References: https://bugs.freedesktop.org/show_bug.cgi?id=98306
Fixes: 1015811609 ("drm/i915: Move long hpd handling into the hotplug work")
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477057478-29328-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 1aab956c7b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use the passed in plane_state instead of plane->state in
vlv_update_plane(). Currently the two are one and the same, but if we
start queuing up multiple plane updates they might not be.
Looks like this was rebase fail on my part.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 8d0deca8c6 ("drm/i915: Pass 90/270 vs. 0/180 rotation info for intel_gen4_compute_page_offset()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 11df4d95b3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On LLC, or even snooped, machines rendering via the GPU ends up in the CPU
cache. This cacheline dirt also needs to be flushed to main memory when
moving to an incoherent domain, such as the display's scanout engine.
Mostly, this happens because either the object is marked as dirty from
its first use or is avoided by setting the object into the display
domain from the start.
v2: Treat WT as not requiring a clflush prior to use on the display
engine as well.
Fixes: 0f71979ab7 ("drm/i915: Performed deferred clflush inside set-cache-level")
References: https://bugs.freedesktop.org/show_bug.cgi?id=95414
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107165204.7008-1-chris@chris-wilson.co.uk
(cherry picked from commit 7aa6ca61ee)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
- better atomic state debugging from Rob
- fence prep from gustavo
- sumits flushed out his backlog of pending dma-buf/fence patches from
various people
- drm_mm leak debugging plus trying to appease Kconfig (Chris)
- a few misc things all over
* tag 'topic/drm-misc-2016-11-10' of git://anongit.freedesktop.org/drm-intel: (35 commits)
drm: Make DRM_DEBUG_MM depend on STACKTRACE_SUPPORT
drm/i915: Restrict DRM_DEBUG_MM automatic selection
drm: Restrict stackdepot usage to builtin drm.ko
drm/msm: module param to dump state on error irq
drm/msm/mdp5: add atomic_print_state support
drm/atomic: add debugfs file to dump out atomic state
drm/atomic: add new drm_debug bit to dump atomic state
drm: add helpers to go from plane state to drm_rect
drm: add helper for printing to log or seq_file
drm: helper macros to print composite types
reservation: revert "wait only with non-zero timeout specified (v3)" v2
drm/ttm: fix ttm_bo_wait
dma-buf/fence: revert "don't wait when specified timeout is zero" (v2)
dma-buf/fence: make timeout handling in fence_default_wait consistent (v2)
drm/amdgpu: add the interface of waiting multiple fences (v4)
dma-buf: return index of the first signaled fence (v2)
MAINTAINERS: update Sync File Framework files
dma-buf/sw_sync: put fence reference from the fence creation
dma-buf/sw_sync: mark sync_timeline_create() static
drm: Add stackdepot include for DRM_DEBUG_MM
...
Zhenyu Wang writes:
gvt-next-kvmgt-framework
This adds initial KVMGT framework based on GVT-g MPT(Mediated Passthrough) interface.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
At the moment we allocate enough sg table entries assuming we
will not be able to do any coalescing. But since in practice
we most often can, and more so very effectively, this ends up
wasting a lot of memory.
A simple and effective way of trimming the over-allocated
entries is to copy the table over to a new one allocated to the
exact size.
Experiments on my freshly logged and idle desktop (KDE) showed
that by doing this we can save approximately 1 MiB of RAM, or
when running a typical benchmark like gl_manhattan I have
even seen a 6 MiB saving.
More complicated techniques such as only copying the last used
page and freeing the rest are left to the reader.
v2:
* Update commit message.
* Use temporary sg_table on stack. (Chris Wilson)
v3:
* Commit message update.
* Comment added.
* Replace memcpy with copy assignment.
(Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478704423-7447-1-git-send-email-tvrtko.ursulin@linux.intel.com
KVMGT is the MPT implementation based on VFIO/KVM. It provides
a kvmgt_mpt ops to gvt for vGPU access mediation, e.g. to
mediate and emulate the MMIO accesses, to inject interrupts
to vGPU user, to intercept the GTT writing and replace it with
DMA-able address, to write-protect guest PPGTT table for
shadowing synchronization, etc. This patch provides the MPT
implementation for GVT, not yet functional due to theabsence
of mdev.
It's built as kvmgt.ko, depends on vfio.ko, kvm.ko and mdev.ko,
and being required by i915.ko. To not introduce hard dependency
in i915.ko, we used indirect symbol reference. But that means
users have to include kvmgt.ko into init ramdisk if their
i915.ko is included.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Xiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
There are currently 4 methods in intel_gvt_io_emulation_ops
to emulate CFG/MMIO reading/writing for intel vGPU. A possibly
better scope is: add 3 more methods for vgpu create/destroy/reset
respectively, and rename the ops to 'intel_gvt_ops', then pass
it to the MPT module (say the future kvmgt) to use: they are
all methods for external usage.
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Hypervisors are different, the MPT ops is a only superset of
all possibly supported hypervisors. There might be other way
out of the MPT to achieve same target. e.g. vfio-based kvmgt
won't provide map_gfn_to_mfn method to establish guest EPT
mapping for aperture, since it will be done in QEMU/KVM, MMIO
is also trapped elsewhere, etc.
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
GVT host needs init/exit hooks to do some initialization/cleanup
work, e.g.: vfio mdev host device register/unregister.
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Current GVT contains some obsolete logic originally cooked to
support the old, non-vfio kvmgt, which is actually workarounds.
We don't support that anymore, so it's safe to remove it and
make a better framework.
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
By providing predefined vGPU types, users can choose which type a vgpu
to create and use, without specifying detailed parameters.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
kmap_atomic doesn't allow sleep until unmapped. However,
it's necessary to allow sleep during reading/writing guest
memory, so use kmap instead.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Xiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
On guest writing a PPGTT entry, if it contains value and the old
entry is valid, gvt will read it and find & free the corresponding
old data for it. However, with the KVM write protection provided
by page_track, the guest entry will be written with new value
before gvt handling. To avoid that, we should use the shadow
entry instead.
Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When we need to reset the global seqno on wraparound, we have to wait
until the current rbtrees are drained (or otherwise the next waiter will
be out of sequence). The current mechanism to kick and spin until
complete, may exit too early as it would break if the target thread was
currently running. Instead, we must wake up the threads, but keep
spinning until the trees have been deleted.
In order to appease Tvrtko, busy spin rather than yield().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108143719.32215-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
All of this state should be updated as soon as possible. It shouldn't be
done later because then future updates may not depend on it.
Changes since v1:
- Move the modeset update to before drm_atomic_state_get. (Ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-10-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
drm_select_eld requires mode_config.mutex and connection_mutex
because it looks at the connector list and at the legacy encoders.
This is not required, because when we call audio_codec_enable we know
which connector it was called for, so pass the state.
This also removes having to look at crtc->config.
Changes since v1:
- Use intel_crtc->pipe instead of drm_crtc_index. (Ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-8-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
[seanpaul resolved conflict in drm_plane.h]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
The newly added assert_kernel_context_is_current introduces a warning
when built with W=1:
drivers/gpu/drm/i915/i915_gem.c: In function ‘assert_kernel_context_is_current’:
drivers/gpu/drm/i915/i915_gem.c:4417:63: error: suggest braces around empty body in an ‘else’ statement [-Werror=empty-body]
Changing the GEM_BUG_ON() macro from an empty definition to "do { } while (0)"
makes the macro more robust to use and avoids the warning.
Fixes: 3033acab07 ("drm/i915: Queue the idling context switch after all other timelines")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108135834.2166677-1-arnd@arndb.de
gvt-next-2016-11-07
- Fix regression from e95433c73a
- Some MMIO handler fixes
- Add better handling for guest reset control
- stratch page table tree for shadow ppgtt
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The code to determine the primary plane offset for gen2/3 looks
different than the code for gen4+, but in fact it's doing the same
thing. Let's make it uniform. Allows us to eliminate the 'obj' from
the list of local variables as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-6-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Use the passed in plane_state instead of plane->state in
vlv_update_plane(). Currently the two are one and the same, but if we
start queuing up multiple plane updates they might not be.
Looks like this was rebase fail on my part.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 8d0deca8c6 ("drm/i915: Pass 90/270 vs. 0/180 rotation info for intel_gen4_compute_page_offset()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
We always flush the chipset prior to executing with the GPU, so we can
skip the flush during ordinary domain management.
This should help mitigate some of the potential performance regressions,
but likely trivial, from doing the flush unconditionally before execbuf
introduced in commit dcd79934b0 ("drm/i915: Unconditionally flush any
chipset buffers before execbuf")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161106130001.9509-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Get rid of sloppy inline functions now that we don't have more users:
i915_gem_request_get_seqno
i915_gem_request_get_engine
v2:
- request->engine is always non-NULL (Chris)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478589108-3702-1-git-send-email-joonas.lahtinen@linux.intel.com
A frequent issue that arises on shutdown is the drm_mm range manager
complaining of a leak. To aide debugging those, drm can now track the
allocation callsite and print those for the leaks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161029184214.17329-2-chris@chris-wilson.co.uk
On LLC, or even snooped, machines rendering via the GPU ends up in the CPU
cache. This cacheline dirt also needs to be flushed to main memory when
moving to an incoherent domain, such as the display's scanout engine.
Mostly, this happens because either the object is marked as dirty from
its first use or is avoided by setting the object into the display
domain from the start.
v2: Treat WT as not requiring a clflush prior to use on the display
engine as well.
Fixes: 0f71979ab7 ("drm/i915: Performed deferred clflush inside set-cache-level")
References: https://bugs.freedesktop.org/show_bug.cgi?id=95414
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107165204.7008-1-chris@chris-wilson.co.uk
Valleyview appears to be limited to only scanning out from the first 512MiB
of the Global GTT. Lets presume that this behaviour was inherited from the
display block copied from g4x (not Ironlake) and all earlier generations
are similarly affected, though testing suggests different symptoms. For
simplicity, impose that these platforms must scanout from the mappable
region. (For extra simplicity, use HAS_GMCH_DISPLAY even though this
catches Cherryview which does not appear to be limited to the low
aperture for its scanout.)
v2: Use HAS_GMCH_DISPLAY() to more clearly convey my intent about
limiting this workaround to the old style of display engine.
v3: Update changelog to reflect testing by Ville Syrjälä
v4: Include the changes to the comments as well
Reported-by: Luis Botello <luis.botello.ortega@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98036
Fixes: 2efb813d53 ("drm/i915: Fallback to using unmappable memory for scanout")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107110128.28762-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 767a222e47)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When we split a large object up into chunks for GTT faulting (because we
can't fit the whole object into the aperture) we have to align our cuts
with the fence registers. Each partial VMA must cover a complete set of
tile rows or the offset into each partial VMA is not aligned with the
whole image. Currently we enforce a minimum size on each partial VMA,
but this minimum size itself was not aligned to the tile row causing
distortion.
Reported-by: Andreas Reis <andreas.reis@gmail.com>
Reported-by: Chris Clayton <chris2553@googlemail.com>
Reported-by: Norbert Preining <preining@logic.at>
Tested-by: Norbert Preining <preining@logic.at>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Fixes: 03af84fe7f ("drm/i915: Choose partial chunksize based on tile row size")
Fixes: a61007a83a ("drm/i915: Fix partial GGTT faulting") # enabling patch
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98402
Testcase: igt/gem_mmap_gtt/medium-copy-odd
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107105443.27855-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 0ef723cbce)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.
Let's apply this work around to GEN9 platforms too, as it fixes the same
issue.
v2: Move drm_device to drm_i915_private conversion
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907
Cc: stable@vger.kernel.org
Cc: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478117601-19122-1-git-send-email-dhinakaran.pandiyan@intel.com
(cherry picked from commit 9c75402418)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.
From BSpec:
"Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)]
Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio
enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may
be audio corruption or screen corruption."
Since, some DP configurations (e.g., MST) use port width x4 and HBR2
link rate, let's increase the cdclk to >= 432 MHz to enable audio for those
cases.
v4: Changed commit message
v3: Combine BDW pixel rate adjustments into a function (Jani)
v2: Restrict fix to BDW
Retain the set cdclk across modesets (Ville)
Cc: stable@vger.kernel.org
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478026080-2925-1-git-send-email-dhinakaran.pandiyan@intel.com
(cherry picked from commit b30ce9e055)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
One of the CI machines began to run into issues with the hpd poller
suddenly waking up in the midst of the late suspend phase. It looks like
this is getting caused by the fact we now deinitialize power wells in
late suspend, which means that intel_hpd_poll_init() gets called in late
suspend causing polling to get re-enabled. So, when deinitializing power
wells on valleyview we now refrain from enabling polling in the midst of
suspend.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98040
Fixes: 19625e85c6 ("drm/i915: Enable polling when we don't have hpd")
Signed-off-by: Lyude <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Petry Latvala <petri.latvala@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477499769-1966-1-git-send-email-lyude@redhat.com
(cherry picked from commit b64b540931)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The VBT provides the platform a way to mix and match the DDI ports vs.
GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose
has no standard GMBUS pin assignment. However, there are machines out
there that use a non-standard mapping for the other ports as well.
Let's start trusting the VBT on this one for all ports on DDI platforms.
I've structured the code such that other platforms could easily start
using this as well, by simply filling in the ddi_port_info. IIRC there
may be CHV system that might actually need this.
v2: Include a commit message, include a debug message during init
Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
(cherry picked from commit e4ab73a132)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
During resume we will reset the SW/HW tracking for each ring head/tail
pointers and so are not prepared to replay any pending requests (as
opposed to GPU reset time). Add an assert for this both to the suspend
and the resume code.
v2:
- Check for ELSP port idle already during suspend and check !gt.awake
during resume. (Chris)
v3:
- Move the !gt.awake check to i915_gem_resume().
v4:
- s/intel_lr_engines_idle/intel_execlists_idle/ (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-4-git-send-email-imre.deak@intel.com
We assume that the GPU is idle once receiving the seqno via the last
request's user interrupt. In execlist mode the corresponding context
completed interrupt can be delayed though and until this latter
interrupt arrives we consider the request to be pending on the ELSP
submit port. This can cause a problem during system suspend where this
last request will be seen by the resume code as still pending. Such
pending requests are normally replayed after a GPU reset, but during
resume we reset both SW and HW tracking of the ring head/tail pointers,
so replaying the pending request with its stale tail pointer will leave
the ring in an inconsistent state. A subsequent request submission can
lead then to the GPU executing from uninitialized area in the ring
behind the above stale tail pointer.
Fix this by making sure any pending request on the ELSP port is
completed before suspending. I used a polling wait since the completion
time I measured was <1ms and since normally we only need to wait during
system suspend. GPU idling during runtime suspend is scheduled with a
delay (currently 50-100ms) after the retirement of the last request at
which point the context completed interrupt must have arrived already.
The chance of this bug was increased by
commit 1c777c5d1d
Author: Imre Deak <imre.deak@intel.com>
Date: Wed Oct 12 17:46:37 2016 +0300
drm/i915/hsw: Fix GPU hang during resume from S3-devices state
but it could happen even without the explicit GPU reset, since we
disable interrupts afterwards during the suspend sequence.
v2:
- Do an unlocked poll-wait first. (Chris)
v3-4:
- s/intel_lr_engines_idle/intel_execlists_idle/ and move
i915.enable_execlists check to the new helper. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98470
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-3-git-send-email-imre.deak@intel.com
There is a small race where a new request can be submitted and retired
after the idle worker started to run which leads to idling the GPU too
early. Fix this by deferring the idling to the pending instance of the
worker.
This scenario was pointed out by Chris.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-2-git-send-email-imre.deak@intel.com
Atm, in case an idle work handler is already pending but haven't yet
started to run, retiring a new request will not extend the active period
as required, rather simply leaves the pending idle work to be scheduled
at the original expiration time. This may lead to idling the GPU too
early. Fix this by using the delayed-work scheduler alternative which
makes sure the handler's expiration time is extended in this case.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Requested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-1-git-send-email-imre.deak@intel.com
Valleyview appears to be limited to only scanning out from the first 512MiB
of the Global GTT. Lets presume that this behaviour was inherited from the
display block copied from g4x (not Ironlake) and all earlier generations
are similarly affected, though testing suggests different symptoms. For
simplicity, impose that these platforms must scanout from the mappable
region. (For extra simplicity, use HAS_GMCH_DISPLAY even though this
catches Cherryview which does not appear to be limited to the low
aperture for its scanout.)
v2: Use HAS_GMCH_DISPLAY() to more clearly convey my intent about
limiting this workaround to the old style of display engine.
v3: Update changelog to reflect testing by Ville Syrjälä
v4: Include the changes to the comments as well
Reported-by: Luis Botello <luis.botello.ortega@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98036
Fixes: 2efb813d53 ("drm/i915: Fallback to using unmappable memory for scanout")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107110128.28762-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com
When we split a large object up into chunks for GTT faulting (because we
can't fit the whole object into the aperture) we have to align our cuts
with the fence registers. Each partial VMA must cover a complete set of
tile rows or the offset into each partial VMA is not aligned with the
whole image. Currently we enforce a minimum size on each partial VMA,
but this minimum size itself was not aligned to the tile row causing
distortion.
Reported-by: Andreas Reis <andreas.reis@gmail.com>
Reported-by: Chris Clayton <chris2553@googlemail.com>
Reported-by: Norbert Preining <preining@logic.at>
Tested-by: Norbert Preining <preining@logic.at>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Fixes: 03af84fe7f ("drm/i915: Choose partial chunksize based on tile row size")
Fixes: a61007a83a ("drm/i915: Fix partial GGTT faulting") # enabling patch
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98402
Testcase: igt/gem_mmap_gtt/medium-copy-odd
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107105443.27855-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
All the unused entries in the page table tree(PML4E->PDPE->PDE->PTE)
should point to scratch page table/scratch page to avoid page walk error
due to the page prefetching.
When removing an entry in shadow PPGTT, it need map to scratch page
also, the older implementation use single scratch page to assign to all
level entries, it doesn't align the page walk behavior when removed
entry is in PML, PDP, PD. To avoid potential page walk error this patch
implement a scratch page tree to replace the single scratch page.
v2: more details in commit message address Kevin's comments.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When SW wishes to reset the render engine, it will program
engine's reset control register and wait response from HW.
We need emulate the behavior of this register so guest i915
driver could walk through the engine reset flow. The registers
are not emulated in gvt yet, this patch add the emulation
logic.
v2: add more desc info in commit message.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
From commit e95433c73a, workload status setting
was changed to only capture on error path, but we need to set it properly in
normal path too, otherwise we'll fail to complete workload which could lead
guest VM vGPU reset.
v2: uses braces and add Fixes tag.
Fixes: e95433c73a ("drm/i915: Rearrange i915_wait_request() accounting with callers")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Misc ctl related registers are for WA purpose, should detect the
stepping info first before updating HW value.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Need a explicit write_vreg in TLB MMIO write handler, beside that
TLB vreg should update correspondingly following HW status to do
correct emulation.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Missing write_vreg in DMA_CTRL write handler would make obsolete
value return when read vreg.
v2: get data from vreg after updating it.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Remove the variable 'execlist' as it's unused in function
vgpu_has_pending_workload.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This is to fix smatch warning on
drivers/gpu/drm/i915/gvt/cmd_parser.c:1421 cmd_handler_mi_op_2f()
warn: shift has higher precedence than mask
We need bits 20-19 mask for data size.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Now that we don't run the connector reprobing from i915_drm_resume(), we
need to make it so we don't have to wait for reprobing to finish so that
we actually speed things up. In order to do this, we need to make sure
that i915_drm_resume() doesn't get blocked by i915_hpd_poll_init_work()
while trying to acquire the mode_config lock that
drm_kms_helper_poll_enable() needs to acquire.
The easiest way to do this is to just enable polling before hpd. This
shouldn't break anything since at that point we have everything else we
need for polling enabled.
As well, this should result in a rather significant improvement in how
quickly we can resume the system.
Signed-off-by: Lyude <lyude@redhat.com>
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Testcase: analyze_suspend.py -config config/suspend-callgraph.cfg -filter i915
Weine's investigation on benchmarking the suspend/resume process pointed
out a lot of the time in suspend/resume is being spent reprobing. While
the reprobing process is a lengthy one for good reason, we don't need to
hold up the entire suspend/resume process while we wait for it to
finish. Luckily as it turns out, we already trigger a full connector
reprobe in i915_hpd_poll_init_work(), so we can just ditch reprobing in
i915_drm_resume() entirely.
This won't lead to less time spent resuming just yet since now the
bottleneck will be waiting for the mode_config lock in
drm_kms_helper_poll_enable(), since that will be held as long as
i915_hpd_poll_init_work() is reprobing all of the connectors. But we'll
address that in the next patch.
Signed-off-by: Lyude <lyude@redhat.com>
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Testcase: analyze_suspend.py -config config/suspend-callgraph.cfg -filter i915
According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.
Let's apply this work around to GEN9 platforms too, as it fixes the same
issue.
v2: Move drm_device to drm_i915_private conversion
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907
Cc: stable@vger.kernel.org
Cc: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478117601-19122-1-git-send-email-dhinakaran.pandiyan@intel.com
According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.
From BSpec:
"Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)]
Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio
enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may
be audio corruption or screen corruption."
Since, some DP configurations (e.g., MST) use port width x4 and HBR2
link rate, let's increase the cdclk to >= 432 MHz to enable audio for those
cases.
v4: Changed commit message
v3: Combine BDW pixel rate adjustments into a function (Jani)
v2: Restrict fix to BDW
Retain the set cdclk across modesets (Ville)
Cc: stable@vger.kernel.org
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478026080-2925-1-git-send-email-dhinakaran.pandiyan@intel.com
commit bc0629a767 ("drm/i915: Track pages pinned due to swizzling
quirk") fixed one problem, but revealed a whole lot more. The root cause
of the pin count mismatch for the swizzle quirk (for L-shaped memory on
gen3/4) was that we were incrementing the pages_pin_count upon getting
the backing pages but then overwriting the pages_pin_count to set it to
1 afterwards. With a little bit of adjustment to satisfy the GEM_BUG_ON
sanitychecks, the fix is to replace the explicit atomic_set with an
atomic_inc.
v2: Consistently use atomics (not mix atomics and helpers) within the
lowlevel get_pages routines. This makes the atomic operations much
clearer.
Fixes: 1233e2db19 ("drm/i915: Move object backing storage manipulation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161104103001.27643-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When supplying a view to vma_compare() it is required that the supplied
i915_address_space is the global GTT. I tested the VMA instead (which is
the current position in the rbtree and maybe from any address space).
Reported-by: Matthew Auld <matthew.auld@intel.com>
Tested-by: Matthew Auld <matthew.auld@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98579
Fixes: db6c2b4151 ("drm/i915: Store the vma in an rbtree...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161103200852.23431-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Move has_64bit_reloc into dev_priv->info. This will make it visible
in the feature listing debug output.
v2:
- Keep the struct member to keep GCC fragile but happy (Chris)
v3:
- More detailed commit message (Chris)
- Include forgotten CHV and BXT (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478162386-5018-1-git-send-email-joonas.lahtinen@linux.intel.com
Mike Krinkin reported hangs in the DRM code and bisected it to:
3ab7c086d5 ("locking/drm: Kill mutex trickery")
Hugh Dickins observed:
"i915_gem_shrinker_lock() is broken: but copy the pattern from
msm_gem_shrinker_lock() and it's okay - patch below."
Pick up the fix in isolation to make sure the bug is fixed, cleanup
patch will follow up.
Originally-From: Hugh Dickins <hughd@google.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: Mike Krinkin <krinkin.m.u@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: chris@chris-wilson.co.uk
Cc: jason.low2@hpe.com
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1610301645180.28429@eggly.anvils
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Create new file for hangcheck specific code, intel_hangcheck.c,
and move all related code in it.
v2: s/intel_engine_hangcheck/intel_engine (Chris)
No functional changes.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478018583-5816-1-git-send-email-mika.kuoppala@intel.com
Comparing pte index to a number of entries is wrong
when clearing a range of pte entries. Use end marker
of 'one past' to correctly point adequate number of
ptes to the scratch page.
v2: assert early instead of warning late (Chris)
v3: removed consts (Joonas)
Fixes: d209b9c3cd ("drm/i915/gtt: Split gen8_ppgtt_clear_pte_range")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98282
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Commit 1bec9b0bda ("drm/i915/shrinker: Only shmemfs objects
are backed by swap") stopped considering the userptr objects
in shrinker callbacks.
Restore that so idle userptr objects can be discarded in order
to free up memory.
One change further to what was introduced in 1bec9b0bda is
to start considering userptr objects in oom but that should
also be a correct thing to do.
v2: Introduce I915_GEM_OBJECT_IS_SHRINKABLE. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 1bec9b0bda ("drm/i915/shrinker: Only shmemfs objects are backed by swap")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: <stable@vger.kernel.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478011450-6634-1-git-send-email-tvrtko.ursulin@linux.intel.com
Replace the open coded dev_priv->pipe_to_crtc_mapping[] usage with
intel_get_crtc_for_pipe().
Mostly done with coccinelle, with a few manual tweaks
@@
expression E1, E2;
@@
(
- E1->pipe_to_crtc_mapping[E2]
+ intel_get_crtc_for_pipe(E1, E2)
|
- E1->plane_to_crtc_mapping[E2]
+ intel_get_crtc_for_plane(E1, E2)
)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-12-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
For legacy contexts we employ an optimisation to only flush the context
when binding into the global GTT. This avoids stalling on the GPU when
reloading an active context. Wrap this detail up into a helper and
export it for a potential third user. (Longer term, context pinning
needs to be reworked as the current handling of switch context pins too
late and so risks eviction and corrupting the request. Plans, plans,
plans.)
v2: Expand the comment explaining the optimisation for avoiding the
stall on active contexts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161030132820.32163-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
There's no need to keep a duplicate skl_pipe_wm around any more,
everything can be discovered from crtc_state, which we pass around
correctly now even in case of plane disable.
The copy in intel_crtc->wm.skl.active is equal to
crtc_state->wm.skl.optimal after the atomic commit completes.
It's useful for two-step watermark programming, but not required for
gen9+ which does it in a single step. We can pull the old allocation
from old_crtc_state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-9-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Move calculating minimum allocations to a helper, which cleans up the
code some more. The cursor is still allocated in advance because it
doesn't count towards data rate and should always be reserved.
changes since v1:
- Change comment to have a extra opening line. (Matt)
- Rebase to remove unused plane->pipe == pipe, handled by the iterator
now. (Paulo)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-7-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
It's only used in one function, and can be calculated without caching it
in the global struct by using drm_atomic_crtc_state_for_each_plane_state.
There are loops over all planes, including planes that don't exist.
This is harmless, because data_rate will always be 0 for them and we
never program them when updating watermarks.
Changes since v1:
- Rename rate back to data_rate, and change array name to
plane_data_rate. (Matt)
- Remove whitespace. (Paulo)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-5-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Using for_each_intel_plane_on_crtc will allow us to find all allocations
that may have changed, not just the one added by the atomic state.
This will print changes to plane allocations for crtc's when some
planes are not added to the atomic state.
Changes since v1:
- Rephrase commit message. (Ville)
- Use plane->base.id and plane->name to kill off cursor special
case. (Ville)
- Add intel_crtc to prevent a line wrap. (Paulo)
- Line wrap debug messages.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/c9f7dc1a-d23a-7c16-b2b7-1c23dd07ed35@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
I'm planning on getting rid of all obj->state dereferences,
and replace thhem with accessor functions.
Remove this one early, they're equivalent because removed
planes are already part of the state, else they could not
have been removed.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-3-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Caching is not required, drm_atomic_crtc_state_for_each_plane_state can
be used to inspect the states of all planes assigned to the CRTC even
if they are not part of _state, so we can just recalculate every time.
Changes since v1:
- Remove plane->pipe checks, they're implied by the macros.
- Split unrelated changes to a separate commit.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477489299-25777-2-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
The shrinker may appear to recurse into obj->mm.lock as the shrinker may
be called from a direct reclaim path whilst handling get_pages. We
filter out recursing on the same obj->mm.lock by inspecting
obj->mm.pages, but we do want to take the lock on a second object in
order to reap their pages. lockdep spots the recursion on the same
lockclass and needs annotation to avoid a false positive. To keep the
two paths distinct, create an enum to indicate which subclass of
obj->mm.lock we are using. This removes the false positive and avoids
masking real bugs.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161101121134.27504-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
With full-ppgtt one of the main bottlenecks is the lookup of the VMA
underneath the object. For execbuf there is merit in having a very fast
direct lookup of ctx:handle to the vma using a hashtree, but that still
leaves a large number of other lookups. One way to speed up the lookup
would be to use a rhashtable, but that requires extra allocations and
may exhibit poor worse case behaviour. An alternative is to use an
embedded rbtree, i.e. no extra allocations and deterministic behaviour,
but at the slight cost of O(lgN) lookups (instead of O(1) for
rhashtable). The major of such tree will be very shallow and so not much
slower, and still scales much, much better than the current unsorted
list.
v2: Bump vma_compare() to return a long, as we return the result of
comparing two pointers.
References: https://bugs.freedesktop.org/show_bug.cgi?id=87726
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161101115400.15647-1-chris@chris-wilson.co.uk
If we have a tiled object and an unknown CPU swizzle pattern, we pin the
pages to prevent the object from being swapped out (and us corrupting
the contents as we do not know the access pattern and so cannot convert
it to linear and back to tiled on reuse). This requires us to remember
to drop the extra pinning when freeing the object, or else we trigger
warnings about the pin leak. In commit fbbd37b36f ("drm/i915: Move
object release to a freelist + worker"), the object free path was
deferred to a worker, but the unpinning of the quirk, along with marking
the object as reclaimable, was left on the immediate path (so that if
required we could reclaim the pages under memory pressure as early as
possible). However, this split introduced a bug where the pages were no
longer being unpinned if they were marked as unneeded.
[ 231.800401] WARNING: CPU: 1 PID: 90 at drivers/gpu/drm/i915/i915_gem.c:4275 __i915_gem_free_objects+0x326/0x3c0 [i915]
[ 231.800403] WARN_ON(i915_gem_object_has_pinned_pages(obj))
[ 231.800405] Modules linked in:
[ 231.800406] snd_hda_intel i915 snd_hda_codec_generic mei_me snd_hda_codec coretemp snd_hwdep mei lpc_ich snd_hda_core snd_pcm e1000e ptp pps_core [last unloaded: i915]
[ 231.800426] CPU: 1 PID: 90 Comm: kworker/1:4 Tainted: G U 4.9.0-rc2-CI-CI_DRM_1780+ #1
[ 231.800428] Hardware name: LENOVO 7465CTO/7465CTO, BIOS 6DET44WW (2.08 ) 04/22/2009
[ 231.800456] Workqueue: events __i915_gem_free_work [i915]
[ 231.800459] ffffc9000034fc80 ffffffff8142dd65 ffffc9000034fcd0 0000000000000000
[ 231.800465] ffffc9000034fcc0 ffffffff8107e4e6 000010b300000001 0000000000001000
[ 231.800469] ffff88011d3db740 ffff880130ef0000 0000000000000000 ffff880130ef5ea0
[ 231.800474] Call Trace:
[ 231.800479] [<ffffffff8142dd65>] dump_stack+0x67/0x92
[ 231.800484] [<ffffffff8107e4e6>] __warn+0xc6/0xe0
[ 231.800487] [<ffffffff8107e54a>] warn_slowpath_fmt+0x4a/0x50
[ 231.800491] [<ffffffff811d12ac>] ? kmem_cache_free+0x2dc/0x340
[ 231.800520] [<ffffffffa009ef36>] __i915_gem_free_objects+0x326/0x3c0 [i915]
[ 231.800548] [<ffffffffa009effe>] __i915_gem_free_work+0x2e/0x50 [i915]
[ 231.800552] [<ffffffff8109c27c>] process_one_work+0x1ec/0x6b0
[ 231.800555] [<ffffffff8109c1f6>] ? process_one_work+0x166/0x6b0
[ 231.800558] [<ffffffff8109c789>] worker_thread+0x49/0x490
[ 231.800561] [<ffffffff8109c740>] ? process_one_work+0x6b0/0x6b0
[ 231.800563] [<ffffffff8109c740>] ? process_one_work+0x6b0/0x6b0
[ 231.800566] [<ffffffff810a2aab>] kthread+0xeb/0x110
[ 231.800569] [<ffffffff810a29c0>] ? kthread_park+0x60/0x60
[ 231.800573] [<ffffffff818164a7>] ret_from_fork+0x27/0x40
Moving to a separate flag for tracking the quirked pin is overkill for
the bug (since we only have to interchange the two tests in
i915_gem_free_object) but it does reduce a complicated test on all
objects and provide a sanitycheck for uncommon code paths.
Fixes: fbbd37b36f ("drm/i915: Move object release to a freelist + worker")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161101100317.11129-2-chris@chris-wilson.co.uk
During shrinking, we walk over the list of objects searching for
victims. Any that are not removed are put back into the global list.
Currently, they are put back in order (at the front) which means they
will be first to be scanned again. If we instead move them to the rear
of the list, we will scan new potential victims on the next pass and
waste less time rescanning unshrinkable objects. Normally the lists are
kept in rough order to shrinking (with object least frequently used at
the start), by moving just scanned objects to the rear we are
acknowledging that they are still in use.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161101084843.3961-3-chris@chris-wilson.co.uk
Due to the plane->index not getting readjusted in drm_plane_cleanup(),
we can't continue initialization of some plane/crtc init fails.
Well, we sort of could I suppose if we left all initialized planes on
the list, but that would expose those planes to userspace as well.
But for crtcs the situation is even worse since we assume that
pipe==crtc index occasionally, so we can't really deal with a partially
initialize set of crtcs.
So seems safest to just abort the entire thing if anything goes wrong.
All the failure paths here are kmalloc()s anyway, so it seems unlikely
we'd get very far if these start failing.
v2: Add (enum plane) case to silence gcc
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477411083-19255-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
One of the CI machines began to run into issues with the hpd poller
suddenly waking up in the midst of the late suspend phase. It looks like
this is getting caused by the fact we now deinitialize power wells in
late suspend, which means that intel_hpd_poll_init() gets called in late
suspend causing polling to get re-enabled. So, when deinitializing power
wells on valleyview we now refrain from enabling polling in the midst of
suspend.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98040
Fixes: 19625e85c6 ("drm/i915: Enable polling when we don't have hpd")
Signed-off-by: Lyude <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Petry Latvala <petri.latvala@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477499769-1966-1-git-send-email-lyude@redhat.com
With the infrastructure converted over to tracking multiple timelines in
the GEM API whilst preserving the efficiency of using a single execution
timeline internally, we can now assign a separate timeline to every
context with full-ppgtt.
v2: Add a comment to indicate the xfer between timelines upon submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-35-chris@chris-wilson.co.uk
Defer the assignment of the global seqno on a request to its submission.
In the next patch, we will only allocate the global seqno at that time,
here we are just enabling the wait-for-submission before wait-for-seqno
paths.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-34-chris@chris-wilson.co.uk
A restriction on our global seqno is that they cannot wrap, and that we
cannot use the value 0. This allows us to detect when a request has not
yet been submitted, its global seqno is still 0, and ensures that
hardware semaphores are monotonic as required by older hardware. To
meet these restrictions when we defer the assignment of the global
seqno, we must check that we have an available slot in the global seqno
space during request construction. If that test fails, we wait for all
requests to be completed and reset the hardware back to 0.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-33-chris@chris-wilson.co.uk
This will be used for communicating issues with this context to
userspace, so we want to identify the parent process and the individual
context. Note that the name isn't quite unique, it makes the presumption
of there only being a single device fd per process.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-31-chris@chris-wilson.co.uk
Currently we try to reduce the number of synchronisations (now the
number of requests we need to wait upon) by noting that if we have
earlier waited upon a request, all subsequent requests in the timeline
will be after the wait. This only applies to requests in this timeline,
as other timelines will not be ordered by that waiter.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-30-chris@chris-wilson.co.uk
Move the actual emission of the breadcrumb for closing the request from
i915_add_request() to the submit callback. (It can be moved later when
required.) This allows us to defer the allocation of the global_seqno
from request construction to actual submission, allowing us to emit the
requests out of order (wrt to the order of their construction, they
still will only be executed one all of their dependencies are resolved
including that all earlier requests on their timeline have been
submitted.) We have to specialise how we then emit the request in order
to write into the preallocated space, rather than at the tail of the
ringbuffer (which will have been advanced by the addition of new
requests).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-29-chris@chris-wilson.co.uk
In the next patch, we will use deferred breadcrumb emission. That requires
reserving sufficient space in the ringbuffer to emit the breadcrumb, which
first requires us to know how large the breadcrumb is.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-28-chris@chris-wilson.co.uk
Now that the emission of the request tail and its submission to hardware
are two separate steps, engine->emit_request() is confusing.
engine->emit_request() is called to emit the breadcrumb commands for the
request into the ring, name it such (engine->emit_breadcrumb).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-27-chris@chris-wilson.co.uk
Though we will have multiple timelines, we still have a single timeline
of execution. This we can use to provide an execution and retirement order
of requests. This keeps tracking execution of requests simple, and vital
for preserving a single waiter (i.e. so that we can order the waiters so
that only the earliest to wakeup need be woken). To accomplish this we
distinguish the seqno used to order requests per-context (external) and
that used internally for execution.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-26-chris@chris-wilson.co.uk
In future patches, we will no longer be able to wait on a static global
seqno and instead have to break our wait up into phases. First we wait
for the global seqno assignment (upon submission to hardware), and once
submitted we wait for the hardware to complete.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-25-chris@chris-wilson.co.uk
Before suspend, we wait for the switch to the kernel context. In order
for all the other context images to be complete upon suspend, that
switch must be the last operation by the GPU (i.e. this idling request
must not overtake any pending requests). To make this request execute last,
we make it depend on every other inflight request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-24-chris@chris-wilson.co.uk
Our timelines are more than just a seqno. They also provide an ordered
list of requests to be executed. Due to the restriction of handling
individual address spaces, we are limited to a timeline per address
space but we use a fence context per engine within.
Our first step to introducing independent timelines per context (i.e. to
allow each context to have a queue of requests to execute that have a
defined set of dependencies on other requests) is to provide a timeline
abstraction for the global execution queue.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-23-chris@chris-wilson.co.uk
After combining the dma-buf reservation object and the GEM reservation
object, we lost the ability to do a nonblocking wait on the i915 request
(as we blocked upon the reservation object during prepare_fb). We can
instead convert the reservation object into a fence upon which we can
asynchronously wait (including a forced timeout in case the DMA fence is
never signaled).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-22-chris@chris-wilson.co.uk
In preparation to support many distinct timelines, we need to expand the
activity tracking on the GEM object to handle more than just a request
per engine. We already use the struct reservation_object on the dma-buf
to handle many fence contexts, so integrating that into the GEM object
itself is the preferred solution. (For example, we can now share the same
reservation_object between every consumer/producer using this buffer and
skip the manual import/export via dma-buf.)
v2: Reimplement busy-ioctl (by walking the reservation object), postpone
the ABI change for another day. Similarly use the reservation object to
find the last_write request (if active and from i915) for choosing
display CS flips.
Caveats:
* busy-ioctl: busy-ioctl only reports on the native fences, it will not
warn of stalls (in set-domain-ioctl, pread/pwrite etc) if the object is
being rendered to by external fences. It also will not report the same
busy state as wait-ioctl (or polling on the dma-buf) in the same
circumstances. On the plus side, it does retain reporting of which
*i915* engines are engaged with this object.
* non-blocking atomic modesets take a step backwards as the wait for
render completion blocks the ioctl. This is fixed in a subsequent
patch to use a fence instead for awaiting on the rendering, see
"drm/i915: Restore nonblocking awaits for modesetting"
* dynamic array manipulation for shared-fences in reservation is slower
than the previous lockless static assignment (e.g. gem_exec_lut_handle
runtime on ivb goes from 42s to 66s), mainly due to atomic operations
(maintaining the fence refcounts).
* loss of object-level retirement callbacks, emulated by VMA retirement
tracking.
* minor loss of object-level last activity information from debugfs,
could be replaced with per-vma information if desired
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-21-chris@chris-wilson.co.uk
Having moved the locked phase of freeing an object to a separate worker,
we can now declare to the core that we only need the unlocked variant of
driver->gem_free_object, and can use the simple unreference internally.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-20-chris@chris-wilson.co.uk
We want to hide the latency of releasing objects and their backing
storage from the submission, so we move the actual free to a worker.
This allows us to switch to struct_mutex freeing of the object in the
next patch.
Furthermore, if we know that the object we are dereferencing remains valid
for the duration of our access, we can forgo the usual synchronisation
barriers and atomic reference counting. To ensure this we defer freeing
an object til after an RCU grace period, such that any lookup of the
object within an RCU read critical section will remain valid until
after we exit that critical section. We also employ this delay for
rate-limiting the serialisation on reallocation - we have to slow down
object creation in order to prevent resource starvation (in particular,
files).
v2: Return early in i915_gem_tiling() ioctl to skip over superfluous
work on error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-19-chris@chris-wilson.co.uk
We only need struct_mutex within pwrite for a brief window where we need
to serialise with rendering and control our cache domains. Elsewhere we
can rely on the backing storage being pinned, and forgive userspace any
races against us.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-17-chris@chris-wilson.co.uk
We only need struct_mutex within pread for a brief window where we need
to serialise with rendering and control our cache domains. Elsewhere we
can rely on the backing storage being pinned, and forgive userspace any
races against us.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-16-chris@chris-wilson.co.uk
Break the allocation of the backing storage away from struct_mutex into
a per-object lock. This allows parallel page allocation, provided we can
do so outside of struct_mutex (i.e. set-domain-ioctl, pwrite, GTT
fault), i.e. before execbuf! The increased cost of the atomic counters
are hidden behind i915_vma_pin() for the typical case of execbuf, i.e.
as the object is typically bound between execbufs, the page_pin_count is
static. The cost will be felt around set-domain and pwrite, but offset
by the improvement from reduced struct_mutex contention.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-14-chris@chris-wilson.co.uk
The plan is to move obj->pages out from under the struct_mutex into its
own per-object lock. We need to prune any assumption of the struct_mutex
from the get_pages/put_pages backends, and to make it easier we pass
around the sg_table to operate on rather than indirectly via the obj.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-13-chris@chris-wilson.co.uk
The plan is to make obtaining the backing storage for the object avoid
struct_mutex (i.e. use its own locking). The first step is to update the
API so that normal users only call pin/unpin whilst working on the
backing storage.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-12-chris@chris-wilson.co.uk
A while ago we switched from a contiguous array of pages into an sglist,
for that was both more convenient for mapping to hardware and avoided
the requirement for a vmalloc array of pages on every object. However,
certain GEM API calls (like pwrite, pread as well as performing
relocations) do desire access to individual struct pages. A quick hack
was to introduce a cache of the last access such that finding the
following page was quick - this works so long as the caller desired
sequential access. Walking backwards, or multiple callers, still hits a
slow linear search for each page. One solution is to store each
successful lookup in a radix tree.
v2: Rewrite building the radixtree for clarity, hopefully.
v3: Rearrange execbuf to avoid calling i915_gem_object_get_sg() from
within an atomic section and so relax the allocation context to a simple
GFP_KERNEL and mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-10-chris@chris-wilson.co.uk
The golden render state is constant, but we recreate the batch setting
it up for every new context. If we keep that batch in a volatile cache
we can safely reuse it whenever we need to initialise a new context. We
mark the pages as purgeable and use the shrinker to recover pages from
the batch whenever we face memory pressues, recreating that batch afresh
on the next new context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtien@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-8-chris@chris-wilson.co.uk
Quite a few of our objects used for internal hardware programming do not
benefit from being swappable or from being zero initialised. As such
they do not benefit from using a shmemfs backing storage and since they
are internal and never directly exposed to the user, we do not need to
worry about providing a filp. For these we can use an
drm_i915_gem_object wrapper around a sg_table of plain struct page. They
are not swap backed and not automatically pinned. If they are reaped
by the shrinker, the pages are released and the contents discarded. For
the internal use case, this is fine as for example, ringbuffers are
pinned from being written by a request to be read by the hardware. Once
they are idle, they can be discarded entirely. As such they are a good
match for execlist ringbuffers and a small variety of other internal
objects.
In the first iteration, this is limited to the scratch batch buffers we
use (for command parsing and state initialisation).
v2: Allocate physically contiguous pages, where possible.
v3: Reduce maximum order on subsequent requests following an allocation
failure.
v4: Fix up mismatch between swiotlb segment size and page count (it
counts in 2k units, not 4k pages)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk
Our low-level wait routine has evolved from our generic wait interface
that handled unlocked, RPS boosting, waits with time tracking. If we
push our GEM fence tracking to use reservation_objects (required for
handling multiple timelines), we lose the ability to pass the required
information down to i915_wait_request(). However, if we push the extra
functionality from i915_wait_request() to the individual callsites
(i915_gem_object_wait_rendering and i915_gem_wait_ioctl) that make use
of those extras, we can both simplify our low level wait and prepare for
extending the GEM interface for use of reservation_objects.
v2: Rewrite i915_wait_request() kerneldocs
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-4-chris@chris-wilson.co.uk
We only need the active reference to keep the object alive after the
handle has been deleted (so as to prevent a synchronous gem_close). Why
then pay the price of a kref on every execbuf when we can insert that
final active ref just in time for the handle deletion?
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-6-chris@chris-wilson.co.uk
Since we only use the more generic unlocked variant, just rename it as
the normal i915_gem_active_wait(). The temporary cost is that we need to
always acquire the reference in a RCU safe manner, but the benefit is
that we will combine the common paths.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-5-chris@chris-wilson.co.uk
The throttle-ioctl never touches the struct_mutex. It does, however, as
part of its ABI report whether the hardware is terminally wedged. For
that purposes, it only has to report the current state and not incur the
cost of checking/waiting every invocation, as we do not have to wait for
a reset before waiting on a request to ensure completion (that is baked
into the wait request implementation).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-3-chris@chris-wilson.co.uk
In forthcoming patches, we want to be able to dynamically allocate the
wait_queue_t used whilst awaiting. This is more convenient if we extend
the i915_sw_fence_await_sw_fence() to perform the allocation for us if
we pass in a gfp mask as an alternative than a preallocated struct.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-2-chris@chris-wilson.co.uk
We will need to wait on DMA completion (as signaled via struct fence)
before executing our i915_gem_request. Therefore we want to expose a
method for adding the await on the fence itself to the request.
v2: Add a comment detailing a failure to handle a signal-on-any
fence-array.
v3: Pretend that magic numbers don't exist.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-1-chris@chris-wilson.co.uk
We are not allowed to touch the GTT entries underneath an atomic section,
as they take a rpm wakelock (which is illegal from atomic context) and
in the near future acquiring the DMA address for a page within an object
may sleep for an allocation. This makes the current shortcircuit in
relocation_iomap() for performing a second relocation on an adjacent page
illegal, and we need to release the atomic iomapping, lookup the DMA,
insert it into the GTT before reentering the atomic iomap section.
As it happens, this is precisely what we do on if we are using an
iomapping over the full object and not just a single page and by
removing the shortcut, we do the right thing.
Fixes: 9c870d0367 ("drm/i915: Use RPM as the barrier for controlling...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028142756.3850-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
This macro's name is a bit misleading; it doesn't actually iterate over
all planes since it omits the cursor plane. Its only uses are in gen9
code which is using it to iterate over the universal planes (which we
treat as primary+sprites); in these cases the legacy cursor registers
are programmed independently if necessary. The macro's iterator value
(0 for primary plane, spritenum+1 for each secondary plane) also isn't
meaningful outside the gen9 context where the hardware considers them to
all be "universal" planes that follow this numbering.
This is just a renaming/clarification patch with no functional change.
However it will make the subsequent patches more clear.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477522291-10874-2-git-send-email-matthew.d.roper@intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Pass the framebuffer size in .16 fixed point coordinates to
drm_rect_rotate() since that's what the source coordinates are as well
at this stage. We used to do this part of the computation in integer
coordinates, but that got changed when moving the computation to
happen in the check phase of the operation. Unfortunately I forgot
to shift up the fb width and height appropriately.
With the bogus size we ended up with some negative fb offset, which when
added to the vma offset caused out scanout to start at an offset earlier
than we inteded. Eg. when testing on my SKL I saw a row of incorrect
tiles at the top of my screen.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes: b63a16f6cd ("drm/i915: Compute display surface offset in the plane check hook for SKL+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477325584-23679-1-git-send-email-ville.syrjala@linux.intel.com
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit da064b47c0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Objects can have multiple VMAs used for display in which
case assertion that objects must not be pinned for display
more times than the current VMA is incorrect.
v2: Commit message update. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 058d88c433 ("drm/i915: Track pinned VMA")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1477413635-3876-1-git-send-email-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 3299e7e434)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We do not need to set up a fence for the rotated view.
Display does not need it and no one can access it.
v2: Move code to __i915_vma_set_map_and_fenceable. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 05a20d098d ("drm/i915: Move map-and-fenceable tracking to the VMA")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 07ee2bce6a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Broadwell and newer actually compress up to 2560 lines instead of 2048
(as documented in the FBC_CTL page). If we don't take this into
consideration we end up reserving too little stolen memory for the
CFB, so we may allocate something else (such as a ring) right after
what we reserved, and the hardware will overwrite it with the contents
of the CFB when FBC is active, causing GPU hangs. Another possibility
is that the CFB may be allocated at the very end of the available
space, so the CFB will overlap the reserved stolen area, leading to
FIFO underruns.
This bug has always been a problem on BDW (the only affected platform
where FBC is enabled by default), but it's much easier to reproduce
since the following commit:
commit c58b735fc7
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Aug 18 17:16:57 2016 +0100
drm/i915: Allocate rings from stolen
Of course, you can only reproduce the bug if your screen is taller
than 2048 lines.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98213
Fixes: a98ee79317 ("drm/i915/fbc: enable FBC by default on HSW and BDW")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477065346-13736-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit 79f2624b1b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The previous code would wait for fences on the framebuffer from the old
plane state to complete, rather than the new, so you would see tearing
everywhere. Fix this to wait on the new state before we make it active.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: 94f050246b ("drm/i915: nonblocking commit")
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161021144454.6288-1-daniels@collabora.com
(cherry picked from commit 2d2c5ad83f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Now that we use the AUX and GMBUS assignment from VBT for all ports,
let's clean up the sanitization of the port information a bit.
Previosuly we only did this for port E, and only complained about a
non-standard assignment for the other ports. But as we know that
non-standard assignments are a fact of life, let's expand the
sanitization to all the ports.
v2: Include a commit message, fix up the comments a bit
v3: Don't clobber other ports if the current port has no alternate aux ch/ddc pin
Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com> (v2)
(cherry picked from commit 9454fa871e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The VBT provides the platform a way to mix and match the DDI ports vs.
AUX channels. Currently we only trust the VBT for DDI E, which has no
corresponding AUX channel of its own. However it is possible that some
board might use some non-standard DDI vs. AUX port routing even for
the other ports. Perhaps for signal routing reasons or something,
So let's generalize this and trust the VBT for all ports.
For now we'll limit this to DDI platforms, as we trust the VBT a bit
more there anyway when it comes to the DDI ports. I've structured
the code in a way that would allow us to easily expand this to
other platforms as well, by simply filling in the ddi_port_info.
v2: Drop whitespace changes, keep MISSING_CASE() for unknown
aux ch assignment, include a commit message, include debug
message during init
Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
(cherry picked from commit 8f7ce038f1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Luckily, the necessary adjustments for when we're using the scaler are
exactly the same as the ones needed on ILK+, so just reuse the
function we already have.
v2: Invert the patch order so stable backports get easier.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475872138-16194-1-git-send-email-paulo.r.zanoni@intel.com
(cherry picked from commit cfd7e3a202)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently the display INIT power domain disabling/enabling happens in a
mismatched way in the suspend/resume_early hooks respectively. This can
leave display power wells incorrectly disabled in the resume hook if the
suspend sequence is aborted for some reason resulting in the
suspend/resume hooks getting called but the suspend_late/resume_early
hooks being skipped. In particular this change fixes "Unclaimed read
from register 0x1e1204" on BYT/BSW triggered from i915_drm_resume()->
intel_pps_unlock_regs_wa() when suspending with /sys/power/pm_test set
to devices.
Fixes: 85e9067933 ("drm/i915: disable power wells on suspend")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: David Weinehall <david.weinehall@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476358446-11621-1-git-send-email-imre.deak@intel.com
(cherry picked from commit 4c494a5769)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We want to read 3 bytes here, but because the parenthesis are in the
wrong place we instead read:
sizeof(intel_dp->edp_dpcd) == sizeof(intel_dp->edp_dpcd)
which is one byte.
Fixes: fe5a66f91c ("drm/i915: Read PSR caps/intermediate freqs/etc. only once on eDP")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <drm-intel-fixes@lists.freedesktop.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161013085508.GJ16198@mwanda
(cherry picked from commit f7170e2eb8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Fix sparse warning:
drivers/gpu/drm/i915/intel_device_info.c:195:31: warning: Variable
length array is used.
In truth the array does have constant length, but sparse is too dumb to
realize. This is a bit ugly, but silence the warning no matter what.
Fixes: 91bedd34ab ("drm/i915/bdw: Check for slice, subslice and EU count for BDW")
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475574853-4178-1-git-send-email-jani.nikula@intel.com
(cherry picked from commit ff64aa1e63)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Fix sparse warnings:
drivers/gpu/drm/i915/i915_drv.c:1179:5: warning: symbol
'i915_driver_load' was not declared. Should it be static?
drivers/gpu/drm/i915/i915_drv.c:1267:6: warning: symbol
'i915_driver_unload' was not declared. Should it be static?
drivers/gpu/drm/i915/i915_drv.c:2444:25: warning: symbol 'i915_pm_ops'
was not declared. Should it be static?
Fixes: 42f5551d27 ("drm/i915: Split out the PCI driver interface to i915_pci.c")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473946137-1931-3-git-send-email-jani.nikula@intel.com
(cherry picked from commit efab0698f9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
These static helper functions are required to be used during
fallback link rate implemnetation so they need to be placed at the top
of the file.
v3:
* Add cleanup to other patch (Mika Kahola)
v2:
* Dont move around functions declared in intel_drv.h (Rodrigo Vivi)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477524358-16563-4-git-send-email-manasi.d.navare@intel.com
The port registers related to the phys in broxton map to different
channels and specific phys. Make that mapping explicit.
v2: Pass enum dpio_phy to macros instead of mmio base. (Imre)
v3: Fix typo in macros. (Imre)
v4: Also change variables from u32 to enum dpio_phy. (Imre)
Remove leftovers from previous version. (Imre)
v5: Actually git add the changes.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476863940-6019-1-git-send-email-ander.conselvan.de.oliveira@intel.com
Use struct bxt_ddi_phy_info to hold information of where the Rcomp
resistor is located, instead of hard coding it in the init sequence.
Note that this moves the enabling of the phy with the Rcomp resistor out
of the power well enable code. That should be safe since
bxt_ddi_phy_init() is called while the power domains lock is held, and
that is the only way that function gets called, so there is no
possibility of a concurrent phy enable caused by a power domain get
call.
v2: Replace comment about lock with lockdep_assert_held() (Imre)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/62d209950ad48484564f3e793cf247cf62572a39.1475770848.git-series.ander.conselvan.de.oliveira@intel.com
