Currently we will abort the transaction if we get a random error (like
-EIO) while trying to remove the directory entries from the root log
during rename.
However since these are simply log tree related errors, we can mark the
trans as needing a full commit. Then if the error was truly
catastrophic we'll hit it during the normal commit and abort as
appropriate.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During inspection of the return path for replay I noticed that we don't
actually abort the transaction if we get a failure during replay. This
isn't a problem necessarily, as we properly return the error and will
fail to mount. However we still leave this dangling transaction that
could conceivably be committed without thinking there was an error.
We were using btrfs_handle_fs_error() here, but that pre-dates the
transaction abort code. Simply replace the btrfs_handle_fs_error()
calls with transaction aborts, so we still know where exactly things
went wrong, and add a few in some other un-handled error cases.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix memdup.cocci warning:
fs/btrfs/zoned.c:1198:23-30: WARNING opportunity for kmemdup
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Kai Song <songkai01@inspur.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For compressed write, we use a mechanism called async COW, which unlike
regular run_delalloc_cow() or cow_file_range() will also unlock the
first page.
This mechanism allows us to continue handling next ranges, without
waiting for the time consuming compression.
But this has a problem for subpage case, as we could have the following
delalloc range for a page:
0 32K 64K
| |///////| |///////|
\- A \- B
In the above case, if we pass both ranges to cow_file_range_async(),
both range A and range B will try to unlock the full page [0, 64K).
And which one finishes later than the other one will try to do other
page operations like end_page_writeback() on a unlocked page, triggering
VM layer BUG_ON().
To make subpage compression work at least partially, here we add another
restriction for it, only allow compression if the delalloc range is
fully page aligned.
By that, async extent is always ensured to unlock the first page
exclusively, just like it used to be for regular sectorsize.
In theory, we only need to make sure the delalloc range fully covers its
first page, but the tail page will be locked anyway, blocking later
writeback until the compression finishes.
Thus here we choose to make sure the range is fully page aligned before
doing the compression.
In the future, we could optimize the situation by properly increasing
subpage::writers number for the locked page, but that also means we need
to change how we run delalloc range of page.
(Instead of running each delalloc range we hit, we need to find and lock
all delalloc ranges covering the page, then run each of them).
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
With experimental subpage compression enabled, a simple fsstress can
lead to self deadlock on page 720896:
mkfs.btrfs -f -s 4k $dev > /dev/null
mount $dev -o compress $mnt
$fsstress -p 1 -n 100 -w -d $mnt -v -s 1625511156
[CAUSE]
If we have a file layout looks like below:
0 32K 64K 96K 128K
|//| |///////////////|
4K
Then we run delalloc range for the inode, it will:
- Call find_lock_delalloc_range() with @delalloc_start = 0
Then we got a delalloc range [0, 4K).
This range will be COWed.
- Call find_lock_delalloc_range() again with @delalloc_start = 4K
Since find_lock_delalloc_range() never cares whether the range
is still inside page range [0, 64K), it will return range [64K, 128K).
This range meets the condition for subpage compression, will go
through async COW path.
And async COW path will return @page_started.
But that @page_started is now for range [64K, 128K), not for range
[0, 64K).
- writepage_dellloc() returned 1 for page [0, 64K)
Thus page [0, 64K) will not be unlocked, nor its page dirty status
will be cleared.
Next time when we try to lock page [0, 64K) we will deadlock, as there
is no one to release page [0, 64K).
This problem will never happen for regular page size as one page only
contains one sector. After the first find_lock_delalloc_range() call,
the @delalloc_end will go beyond @page_end no matter if we found a
delalloc range or not
Thus this bug only happens for subpage, as now we need multiple runs to
exhaust the delalloc range of a page.
[FIX]
Fix the problem by ensuring the delalloc range we ran at least started
inside @locked_page.
So that we will never get incorrect @page_started.
And to prevent such problem from happening again:
- Make find_lock_delalloc_range() return false if the found range is
beyond @end value passed in.
Since @end will be utilized now, add an ASSERT() to ensure we pass
correct @end into find_lock_delalloc_range().
This also means, for selftests we needs to populate @end before calling
find_lock_delalloc_range().
- New ASSERT() in find_lock_delalloc_range()
Now we will make sure the @start/@end passed in at least covers part
of the page.
- New ASSERT() in run_delalloc_range()
To make sure the range at least starts inside @locked page.
- Use @delalloc_start as proper cursor, while @delalloc_end is always
reset to @page_end.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several call sites of extent_clear_unlock_delalloc() which get
@locked_page = NULL.
So that extent_clear_unlock_delalloc() will try to call
process_one_page() to unlock every page even the first page is not
locked by btrfs_page_start_writer_lock().
This will trigger an ASSERT() in btrfs_subpage_end_and_test_writer() as
previously we require every page passed to
btrfs_subpage_end_and_test_writer() to be locked by
btrfs_page_start_writer_lock().
But compression path doesn't go that way.
Thankfully it's not hard to distinguish page locked by lock_page() and
btrfs_page_start_writer_lock().
So do the check in btrfs_subpage_end_and_test_writer() so now it can
handle both cases well.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pages passed to __extent_writepage() are always locked, but they may be
locked by different functions.
There are two types of locked page for __extent_writepage():
- Page locked by plain lock_page()
It should not have any subpage::writers count.
Can be unlocked by unlock_page().
This is the most common locked page for __extent_writepage() called
inside extent_write_cache_pages() or extent_write_full_page().
Rarer cases include the @locked_page from extent_write_locked_range().
- Page locked by lock_delalloc_pages()
There is only one caller, all pages except @locked_page for
extent_write_locked_range().
In this case, we have to call subpage helper to handle the case.
So here we introduce a helper, btrfs_page_unlock_writer(), to allow
__extent_writepage() to unlock different locked pages.
And since for all other callers of __extent_writepage() their pages are
ensured to be locked by lock_page(), also add an extra check for
epd::extent_locked to unlock such pages directly.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several problems in lzo_compress_pages() preventing it from
being subpage compatible:
- No page offset is calculated when reading from inode pages
For subpage case, we could have @start which is not aligned to
PAGE_SIZE.
Thus the destination where we read data from must take offset in page
into consideration.
- The padding for segment header is bound to PAGE_SIZE
This means, for subpage case we can skip several corners where on x86
machines we need to add padding zeros.
The rework will:
- Update the comment to replace "page" with "sector"
- Introduce a new helper, copy_compressed_data_to_page(), to do the copy
So that we don't need to bother page switching for both input and
output.
Now in lzo_compress_pages() we only care about page switching for
input, while in copy_compressed_data_to_page() we only care about the
page switching for output.
- Only one main cursor
For lzo_compress_pages() we use @cur_in as main cursor.
It will be the file offset we are currently at.
All other helper variables will be only declared inside the loop.
For copy_compressed_data_to_page() it's similar, we will have
@cur_out at the main cursor, which records how many bytes are in the
output.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new helper, submit_uncompressed_range(), for async cow cases
where we fallback to COW.
There are some new updates introduced to the helper:
- Proper locked_page detection
It's possible that the async_extent range doesn't cover the locked
page. In that case we shouldn't unlock the locked page.
In the new helper, we will ensure that we only unlock the locked page
when:
* The locked page covers part of the async_extent range
* The locked page is not unlocked by cow_file_range() nor
extent_write_locked_range()
This also means extra comments are added focusing on the page locking.
- Add extra comment on some rare parameter used.
We use @unlock_page = 0 for cow_file_range(), where only two call
sites doing the same thing, including the new helper.
It's definitely worth some comments.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are two sites are not subpage compatible yet for
extent_write_locked_range():
- How @nr_pages are calculated
For subpage we can have the following range with 64K page size:
0 32K 64K 96K 128K
| |////|/////| |
In that case, although 96K - 32K == 64K, thus it looks like one page
is enough, but the range spans two pages, not one.
Fix it by doing proper round_up() and round_down() to calculate
@nr_pages.
Also add some extra ASSERT()s to ensure the range passed in is already
aligned.
- How the page end is calculated
Currently we just use cur + PAGE_SIZE - 1 to calculate the page end.
Which can't handle the above range layout, and will trigger ASSERT()
in btrfs_writepage_endio_finish_ordered(), as the range is no longer
covered by the page range.
Fix it by taking page end into consideration.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In end_compressed_writeback() we just clear the full page writeback.
For subpage case, if there are two delalloc ranges in the same page, the
2nd range will trigger a BUG_ON() as the page writeback is already
cleared by previous range.
Fix it by using btrfs_page_clamp_clear_writeback() helper.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a WARN_ON() checking if @start is aligned to PAGE_SIZE, not
sectorsize, which will cause false alert for subpage. Fix it to check
against sectorsize.
Furthermore:
- Use ASSERT() to do the check
So that in the future we may skip the check for production build
- Also check alignment for @len
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In function compress_file_range(), when the compression is finished, the
function just rounds up @total_in to PAGE_SIZE. This is fine for
regular sectorsize == PAGE_SIZE case, but not for subpage.
Just change the ALIGN(, PAGE_SIZE) to round_up(, sectorsize) so that
both regular sectorsize and subpage sectorsize will be happy.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several cleanups for extent_write_locked_range(), most of them
are pure cleanups, but with some preparation for future subpage support.
- Add a proper comment for which call sites are suitable
Unlike regular synchronized extent write back, if async COW or zoned
COW happens, we have all pages in the range still locked.
Thus for those (only) two call sites, we need this function to submit
page content into bios and submit them.
- Remove @mode parameter
All the existing two call sites pass WB_SYNC_ALL. No need for @mode
parameter.
- Better error handling
Currently if we hit an error during the page iteration loop, we
overwrite @ret, causing only the last error can be recorded.
Here we add @found_error and @first_error variable to record if we hit
any error, and the first error we hit.
So the first error won't get lost.
- Don't reuse @start as the cursor
We reuse the parameter @start as the cursor to iterate the range, not
a big problem, but since we're here, introduce a proper @cur as the
cursor.
- Remove impossible branch
Since all pages are still locked after the ordered extent is inserted,
there is no way that pages can get its dirty bit cleared.
Remove the branch where page is not dirty and replace it with an
ASSERT().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a big chunk of code inside a while() loop, with tons of strange
jumps for error handling. It's definitely not to the code standard of
today. Move the code into a new function, submit_one_async_extent().
Since we're here, also do the following changes:
- Comment style change
To follow the current scheme
- Don't fallback to non-compressed write then hitting ENOSPC
If we hit ENOSPC for compressed write, how could we reserve more space
for non-compressed write?
Thus we go error path directly.
This removes the retry: label.
- Add more comment for super long parameter list
Explain which parameter is for, so we don't need to check the
prototype.
- Move the error handling to submit_one_async_extent()
Thus no strange code like:
out_free:
...
goto again;
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As the last caller in compression.c has been removed, we don't need that
function anymore.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_submit_compressed_write() will check
btrfs_bio_fits_in_stripe() each time a new page is going to be added.
Even if compressed extent is small, we don't really need to do that for
every page.
Align the behavior to extent_io.c, by determining the stripe boundary
when allocating a bio.
Unlike extent_io.c, in compressed.c we don't need to bother things like
different bio flags, thus no need to re-use bio_ctrl.
Here we just manually introduce new local variable, next_stripe_start,
and use that value returned from alloc_compressed_bio() to calculate
the stripe boundary.
Then each time we add some page range into the bio, we check if we
reached the boundary. And if reached, submit it.
Also, since we have @cur_disk_bytenr to determine whether we're the last
bio, we don't need a explicit last_bio: tag for error handling any more.
And since we use @cur_disk_bytenr to wait, there is no need for
pending_bios, also remove it to save some memory of compressed_bio.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_submit_compressed_read() will check
btrfs_bio_fits_in_stripe() each time a new page is going to be added.
Even if compressed extent is small, we don't really need to do that for
every page.
This patch will align the behavior to extent_io.c, by determining the
stripe boundary when allocating a bio.
Unlike extent_io.c, in compressed.c we don't need to bother things like
different bio flags, thus no need to re-use bio_ctrl.
Here we just manually introduce new local variable, next_stripe_start,
and teach alloc_compressed_bio() to calculate the stripe boundary.
Then each time we add some page range into the bio, we check if we
reached the boundary. And if reached, submit it.
Also, since we have @cur_disk_byte to determine whether we're the last
bio, we don't need a explicit last_bio: tag for error handling any more.
And we can use @cur_disk_byte to track which range has been added to
bio, we can also use @cur_disk_byte to calculate the wait condition, no
need for @pending_bios.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just aggregate the bio allocation code into one helper, so that we can
replace 4 call sites.
There is one special note for zoned write.
Currently btrfs_submit_compressed_write() will only allocate the first
bio using ZONE_APPEND. If we have to submit current bio due to stripe
boundary, the new bio allocated will not use ZONE_APPEND.
In theory this should be a bug, but considering zoned mode currently
only support SINGLE profile, which doesn't have any stripe boundary
limit, it should never be a problem and we have assertions in place.
This function will provide a good entrance for any work which needs to
be done at bio allocation time. Like determining the stripe boundary.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper, submit_compressed_bio(), will aggregate the following
work:
- Increase compressed_bio::pending_bios
- Remap the endio function
- Map and submit the bio
This slightly reorders calls to btrfs_csum_one_bio or
btrfs_lookup_bio_sums but but none of them does anything regarding IO
submission so this is effectively no change. We mainly care about order
of
- atomic_inc
- btrfs_bio_wq_end_io
- btrfs_map_bio
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just like btrfs_submit_compressed_read(), there are quite some BUG_ON()s
inside btrfs_submit_compressed_write() for the bio submission path.
Fix them using the same method:
- For last bio, just endio the bio
As in that case, one of the endio function of all these submitted bio
will be able to free the compressed_bio
- For half-submitted bio, wait and finish the compressed_bio manually
In this case, as long as all other bio finish, we're the only one
referring the compressed bio, and can manually finish it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are quite some BUG_ON()s inside btrfs_submit_compressed_read(),
namely all errors inside the for() loop relies on BUG_ON() to handle
-ENOMEM.
Handle these errors properly by:
- Wait for submitted bios to finish first
Using wake_var_event() APIs to wait without introducing extra memory
overhead inside compressed_bio.
This allows us to wait for any submitted bio to finish, while still
keeps the compressed_bio from being freed.
- Introduce finish_compressed_bio_read() to finish the compressed_bio
- Properly end the bio and finish compressed_bio when error happens
Now in btrfs_submit_compressed_read() even when the bio submission
failed, we can properly handle the error without triggering BUG_ON().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although in btrfs we have very limited usage of PageChecked flag, it's
still some page flag not yet subpage compatible.
Fix it by introducing btrfs_subpage::checked_offset to do the convert.
For most call sites, especially for free-space cache, COW fixup and
btrfs_invalidatepage(), they all work in full page mode anyway.
For other call sites, they work as subpage compatible mode.
Some call sites need extra modification:
- btrfs_drop_pages()
Needs extra parameter to get the real range we need to clear checked
flag.
Also since btrfs_drop_pages() will accept pages beyond the dirtied
range, update btrfs_subpage_clamp_range() to handle such case
by setting @len to 0 if the page is beyond target range.
- btrfs_invalidatepage()
We need to call subpage helper before calling __btrfs_releasepage(),
or it will trigger ASSERT() as page->private will be cleared.
- btrfs_verify_data_csum()
In theory we don't need the io_bio->csum check anymore, but it's
won't hurt. Just change the comment.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For btrfs_submit_compressed_read() and btrfs_submit_compressed_write(),
we have a pretty weird dance around compressed_bio::pending_bios:
btrfs_submit_compressed_read/write()
{
cb = kmalloc()
refcount_set(&cb->pending_bios, 0);
bio = btrfs_alloc_bio();
/* NOTE here, we haven't yet submitted any bio */
refcount_set(&cb->pending_bios, 1);
for (pg_index = 0; pg_index < cb->nr_pages; pg_index++) {
if (submit) {
/* Here we submit bio, but we always have one
* extra pending_bios */
refcount_inc(&cb->pending_bios);
ret = btrfs_map_bio();
}
}
/* Submit the last bio */
ret = btrfs_map_bio();
}
There are two reasons why we do this:
- compressed_bio::pending_bios is a refcount
Thus if it's reduced to 0, it can not be increased again.
- To ensure the compressed_bio is not freed by some submitted bios
If the submitted bio is finished before the next bio submitted,
we can free the compressed_bio completely.
But the above code is sometimes confusing, and we can do it better by
introducing a new member, compressed_bio::pending_sectors.
Now we use compressed_bio::pending_sectors to indicate whether we have
any pending sectors under IO or not yet submitted.
If pending_sectors == 0, we're definitely the last bio of compressed_bio,
and is OK to release the compressed bio.
Now the workflow looks like this:
btrfs_submit_compressed_read/write()
{
cb = kmalloc()
atomic_set(&cb->pending_bios, 0);
refcount_set(&cb->pending_sectors,
compressed_len >> sectorsize_bits);
bio = btrfs_alloc_bio();
for (pg_index = 0; pg_index < cb->nr_pages; pg_index++) {
if (submit) {
refcount_inc(&cb->pending_bios);
ret = btrfs_map_bio();
}
}
/* Submit the last bio */
refcount_inc(&cb->pending_bios);
ret = btrfs_map_bio();
}
For now we still need pending_bios for later error handling, but will
remove pending_bios eventually after properly handling the errors.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
If we remove the subpage limitation in add_ra_bio_pages(), then read a
compressed extent which has part of its range in next page, like the
following inode layout:
0 32K 64K 96K 128K
|<--------------|-------------->|
Btrfs will trigger ASSERT() in endio function:
assertion failed: atomic_read(&subpage->readers) >= nbits
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3431!
Internal error: Oops - BUG: 0 [#1] SMP
Workqueue: btrfs-endio btrfs_work_helper [btrfs]
Call trace:
assertfail.constprop.0+0x28/0x2c [btrfs]
btrfs_subpage_end_reader+0x148/0x14c [btrfs]
end_page_read+0x8c/0x100 [btrfs]
end_bio_extent_readpage+0x320/0x6b0 [btrfs]
bio_endio+0x15c/0x1dc
end_workqueue_fn+0x44/0x64 [btrfs]
btrfs_work_helper+0x74/0x250 [btrfs]
process_one_work+0x1d4/0x47c
worker_thread+0x180/0x400
kthread+0x11c/0x120
ret_from_fork+0x10/0x30
---[ end trace c8b7b552d3bb408c ]---
[CAUSE]
When we read the page range [0, 64K), we find it's a compressed extent,
and we will try to add extra pages in add_ra_bio_pages() to avoid
reading the same compressed extent.
But when we add such page into the read bio, it doesn't follow the
behavior of btrfs_do_readpage() to properly set subpage::readers.
This means, for page [64K, 128K), its subpage::readers is still 0.
And when endio is executed on both pages, since page [64K, 128K) has 0
subpage::readers, it triggers above ASSERT()
[FIX]
Function add_ra_bio_pages() is far from subpage compatible, it always
assume PAGE_SIZE == sectorsize, thus when it skip to next range it
always just skip PAGE_SIZE.
Make it subpage compatible by:
- Skip to next page properly when needed
If we find there is already a page cache, we need to skip to next page.
For that case, we shouldn't just skip PAGE_SIZE bytes, but use
@pg_index to calculate the next bytenr and continue.
- Only add the page range covered by current extent map
We need to calculate which range is covered by current extent map and
only add that part into the read bio.
- Update subpage::readers before submitting the bio
- Use proper cursor other than confusing @last_offset
- Calculate the missed threshold based on sector size
It's no longer using missed pages, as for 64K page size, we have at
most 3 pages to skip. (If aligned only 2 pages)
- Add ASSERT() to make sure our bytenr is always aligned
- Add comment for the function
Add a special note for subpage case, as the function won't really
work well for subpage cases.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since async_extent holds the compressed page, it would trigger the new
ASSERT() in btrfs_mark_ordered_io_finished() which checks that the range
is inside the page.
Now btrfs_writepage_endio_finish_ordered() can accept @page == NULL,
just pass NULL to btrfs_writepage_endio_finish_ordered().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For structure async_chunk, we use a very strange member layout to grab
structure async_cow who owns this async_chunk.
At initialization, it goes like this:
async_chunk[i].pending = &ctx->num_chunks;
Then at async_cow_free() we do a super weird freeing:
/*
* Since the pointer to 'pending' is at the beginning of the array of
* async_chunk's, freeing it ensures the whole array has been freed.
*/
if (atomic_dec_and_test(async_chunk->pending))
kvfree(async_chunk->pending);
This is absolutely an abuse of kvfree().
Replace async_chunk::pending with async_chunk::async_cow, so that we can
grab the async_cow structure directly, without this strange dancing.
And with this change, there is no requirement for any specific member
location.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In function __extent_writepage() we always pass page start to
@delalloc_start for writepage_delalloc().
Thus we don't really need @delalloc_start parameter as we can extract it
from @page.
Remove @delalloc_start parameter and make __extent_writepage() to
declare @page_start and @page_end as const.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Variable @nr_pages only gets increased but never used. Remove it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a directory and inserting a batch of directory items, we are
copying the data of each item from a leaf in the fs/subvolume tree to a
leaf in a log tree, separately. This is not really needed, since we are
copying from a contiguous memory area into another one, so we can use a
single copy operation to copy all items at once.
This patch is part of a small patchset that is comprised of the following
patches:
btrfs: loop only once over data sizes array when inserting an item batch
btrfs: unexport setup_items_for_insert()
btrfs: use single bulk copy operations when logging directories
This is patch 3/3.
The following test was used to compare performance of a branch without the
patchset versus one branch that has the whole patchset applied:
$ cat dir-fsync-test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
NUM_NEW_FILES=1000000
NUM_FILE_DELETES=1000
LEAF_SIZE=16K
mkfs.btrfs -f -n $LEAF_SIZE $DEV
mount -o ssd $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_NEW_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
# Fsync the directory, this will log the new dir items and the inodes
# they point to, because these are new inodes.
start=$(date +%s%N)
xfs_io -c "fsync" $MNT/testdir
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "dir fsync took $dur ms after adding $NUM_NEW_FILES files"
# sync to force transaction commit and wipeout the log.
sync
del_inc=$(( $NUM_NEW_FILES / $NUM_FILE_DELETES ))
for ((i = 1; i <= $NUM_NEW_FILES; i += $del_inc)); do
rm -f $MNT/testdir/file_$i
done
# Fsync the directory, this will only log dir items, there are no
# dentries pointing to new inodes.
start=$(date +%s%N)
xfs_io -c "fsync" $MNT/testdir
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "dir fsync took $dur ms after deleting $NUM_FILE_DELETES files"
umount $MNT
The tests were run on a non-debug kernel (Debian's default kernel config)
and were the following:
*** with a leaf size of 16K, before patchset ***
dir fsync took 8482 ms after adding 1000000 files
dir fsync took 166 ms after deleting 1000 files
*** with a leaf size of 16K, after patchset ***
dir fsync took 8196 ms after adding 1000000 files (-3.4%)
dir fsync took 143 ms after deleting 1000 files (-14.9%)
*** with a leaf size of 64K, before patchset ***
dir fsync took 12851 ms after adding 1000000 files
dir fsync took 466 ms after deleting 1000 files
*** with a leaf size of 64K, after patchset ***
dir fsync took 12287 ms after adding 1000000 files (-4.5%)
dir fsync took 414 ms after deleting 1000 files (-11.8%)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since setup_items_for_insert() is not used anymore outside of ctree.c,
make it static and remove its prototype from ctree.h. This also requires
to move the definition of setup_item_for_insert() from ctree.h to ctree.c
and move down btrfs_duplicate_item() so that it's defined after
setup_items_for_insert().
Further, since setup_item_for_insert() is used outside ctree.c, rename it
to btrfs_setup_item_for_insert().
This patch is part of a small patchset that is comprised of the following
patches:
btrfs: loop only once over data sizes array when inserting an item batch
btrfs: unexport setup_items_for_insert()
btrfs: use single bulk copy operations when logging directories
This is patch 2/3 and performance results, and the specific tests, are
included in the changelog of patch 3/3.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When inserting a batch of items into a btree, we end up looping over the
data sizes array 3 times:
1) Once in the caller of btrfs_insert_empty_items(), when it populates the
array with the data sizes for each item;
2) Once at btrfs_insert_empty_items() to sum the elements of the data
sizes array and compute the total data size;
3) And then once again at setup_items_for_insert(), where we do exactly
the same as what we do at btrfs_insert_empty_items(), to compute the
total data size.
That is not bad for small arrays, but when the arrays have hundreds of
elements, the time spent on looping is not negligible. For example when
doing batch inserts of delayed items for dir index items or when logging
a directory, it's common to have 200 to 260 dir index items in a single
batch when using a leaf size of 16K and using file names between 8 and 12
characters. For a 64K leaf size, multiply that by 4. Taking into account
that during directory logging or when flushing delayed dir index items we
can have many of those large batches, the time spent on the looping adds
up quickly.
It's also more important to avoid it at setup_items_for_insert(), since
we are holding a write lock on a leaf and, in some cases, on upper nodes
of the btree, which causes us to block other tasks that want to access
the leaf and nodes for longer than necessary.
So change the code so that setup_items_for_insert() and
btrfs_insert_empty_items() no longer compute the total data size, and
instead rely on the caller to supply it. This makes us loop over the
array only once, where we can both populate the data size array and
compute the total data size, taking advantage of spatial and temporal
locality. To make this more manageable, use a structure to contain
all the relevant details for a batch of items (keys array, data sizes
array, total data size, number of items), and use it as an argument
for btrfs_insert_empty_items() and setup_items_for_insert().
This patch is part of a small patchset that is comprised of the following
patches:
btrfs: loop only once over data sizes array when inserting an item batch
btrfs: unexport setup_items_for_insert()
btrfs: use single bulk copy operations when logging directories
This is patch 1/3 and performance results, and the specific tests, are
included in the changelog of patch 3/3.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can grab fs_info reliably from btrfs_raid_bio::bioc, as the bioc is
always passed into alloc_rbio(), and only get released when the raid bio
is released.
Remove btrfs_raid_bio::fs_info member, and cleanup all the @fs_info
parameters for alloc_rbio() callers.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_io_context::fs_info is only initialized in
btrfs_map_bio, but there are call sites like btrfs_map_sblock() which
calls __btrfs_map_block() directly, leaving bioc::fs_info uninitialized
(NULL).
Currently this is fine, but later cleanup will rely on bioc::fs_info to
grab fs_info, and this can be a hidden problem for such usage.
This patch will remove such hidden uninitialized member by always
assigning bioc::fs_info at alloc_btrfs_io_context().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We currently use lockdep_assert_held() at btrfs_assert_tree_locked(), and
that checks that we hold a lock either in read mode or write mode.
However in all contexts we use btrfs_assert_tree_locked(), we actually
want to check if we are holding a write lock on the extent buffer's rw
semaphore - it would be a bug if in any of those contexts we were holding
a read lock instead.
So change btrfs_assert_tree_locked() to use lockdep_assert_held_write()
instead and, to make it more explicit, rename btrfs_assert_tree_locked()
to btrfs_assert_tree_write_locked(), so that it's clear we want to check
we are holding a write lock.
For now there are no contexts where we want to assert that we must have
a read lock, but in case that is needed in the future, we can add a new
helper function that just calls out lockdep_assert_held_read().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We got the following lockdep splat while running fstests (specifically
btrfs/003 and btrfs/020 in a row) with the new rc. This was uncovered
by 87579e9b7d ("loop: use worker per cgroup instead of kworker") which
converted loop to using workqueues, which comes with lockdep
annotations that don't exist with kworkers. The lockdep splat is as
follows:
WARNING: possible circular locking dependency detected
5.14.0-rc2-custom+ #34 Not tainted
------------------------------------------------------
losetup/156417 is trying to acquire lock:
ffff9c7645b02d38 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x84/0x600
but task is already holding lock:
ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #5 (&lo->lo_mutex){+.+.}-{3:3}:
__mutex_lock+0xba/0x7c0
lo_open+0x28/0x60 [loop]
blkdev_get_whole+0x28/0xf0
blkdev_get_by_dev.part.0+0x168/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x163/0x3a0
path_openat+0x74d/0xa40
do_filp_open+0x9c/0x140
do_sys_openat2+0xb1/0x170
__x64_sys_openat+0x54/0x90
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #4 (&disk->open_mutex){+.+.}-{3:3}:
__mutex_lock+0xba/0x7c0
blkdev_get_by_dev.part.0+0xd1/0x3c0
blkdev_get_by_path+0xc0/0xd0
btrfs_scan_one_device+0x52/0x1f0 [btrfs]
btrfs_control_ioctl+0xac/0x170 [btrfs]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #3 (uuid_mutex){+.+.}-{3:3}:
__mutex_lock+0xba/0x7c0
btrfs_rm_device+0x48/0x6a0 [btrfs]
btrfs_ioctl+0x2d1c/0x3110 [btrfs]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #2 (sb_writers#11){.+.+}-{0:0}:
lo_write_bvec+0x112/0x290 [loop]
loop_process_work+0x25f/0xcb0 [loop]
process_one_work+0x28f/0x5d0
worker_thread+0x55/0x3c0
kthread+0x140/0x170
ret_from_fork+0x22/0x30
-> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
process_one_work+0x266/0x5d0
worker_thread+0x55/0x3c0
kthread+0x140/0x170
ret_from_fork+0x22/0x30
-> #0 ((wq_completion)loop0){+.+.}-{0:0}:
__lock_acquire+0x1130/0x1dc0
lock_acquire+0xf5/0x320
flush_workqueue+0xae/0x600
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x650 [loop]
lo_ioctl+0x29d/0x780 [loop]
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
(wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&lo->lo_mutex);
lock(&disk->open_mutex);
lock(&lo->lo_mutex);
lock((wq_completion)loop0);
*** DEADLOCK ***
1 lock held by losetup/156417:
#0: ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop]
stack backtrace:
CPU: 8 PID: 156417 Comm: losetup Not tainted 5.14.0-rc2-custom+ #34
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
dump_stack_lvl+0x57/0x72
check_noncircular+0x10a/0x120
__lock_acquire+0x1130/0x1dc0
lock_acquire+0xf5/0x320
? flush_workqueue+0x84/0x600
flush_workqueue+0xae/0x600
? flush_workqueue+0x84/0x600
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x650 [loop]
lo_ioctl+0x29d/0x780 [loop]
? __lock_acquire+0x3a0/0x1dc0
? update_dl_rq_load_avg+0x152/0x360
? lock_is_held_type+0xa5/0x120
? find_held_lock.constprop.0+0x2b/0x80
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f645884de6b
Usually the uuid_mutex exists to protect the fs_devices that map
together all of the devices that match a specific uuid. In rm_device
we're messing with the uuid of a device, so it makes sense to protect
that here.
However in doing that it pulls in a whole host of lockdep dependencies,
as we call mnt_may_write() on the sb before we grab the uuid_mutex, thus
we end up with the dependency chain under the uuid_mutex being added
under the normal sb write dependency chain, which causes problems with
loop devices.
We don't need the uuid mutex here however. If we call
btrfs_scan_one_device() before we scratch the super block we will find
the fs_devices and not find the device itself and return EBUSY because
the fs_devices is open. If we call it after the scratch happens it will
not appear to be a valid btrfs file system.
We do not need to worry about other fs_devices modifying operations here
because we're protected by the exclusive operations locking.
So drop the uuid_mutex here in order to fix the lockdep splat.
A more detailed explanation from the discussion:
We are worried about rm and scan racing with each other, before this
change we'll zero the device out under the UUID mutex so when scan does
run it'll make sure that it can go through the whole device scan thing
without rm messing with us.
We aren't worried if the scratch happens first, because the result is we
don't think this is a btrfs device and we bail out.
The only case we are concerned with is we scratch _after_ scan is able
to read the superblock and gets a seemingly valid super block, so lets
consider this case.
Scan will call device_list_add() with the device we're removing. We'll
call find_fsid_with_metadata_uuid() and get our fs_devices for this
UUID. At this point we lock the fs_devices->device_list_mutex. This is
what protects us in this case, but we have two cases here.
1. We aren't to the device removal part of the RM. We found our device,
and device name matches our path, we go down and we set total_devices
to our super number of devices, which doesn't affect anything because
we haven't done the remove yet.
2. We are past the device removal part, which is protected by the
device_list_mutex. Scan doesn't find the device, it goes down and
does the
if (fs_devices->opened)
return -EBUSY;
check and we bail out.
Nothing about this situation is ideal, but the lockdep splat is real,
and the fix is safe, tho admittedly a bit scary looking.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copy more from the discussion ]
Signed-off-by: David Sterba <dsterba@suse.com>
Previously we had "struct btrfs_bio", which records IO context for
mirrored IO and RAID56, and "strcut btrfs_io_bio", which records extra
btrfs specific info for logical bytenr bio.
With "btrfs_bio" renamed to "btrfs_io_context", we are safe to rename
"btrfs_io_bio" to "btrfs_bio" which is a more suitable name now.
The struct btrfs_bio changes meaning by this commit. There was a
suggested name like btrfs_logical_bio but it's a bit long and we'd
prefer to use a shorter name.
This could be a concern for backports to older kernels where the
different meaning could possibly cause confusion or bugs. Comparing the
new and old structures, there's no overlap among the struct members so a
build would break in case of incorrect backport.
We haven't had many backports to bio code anyway so this is more of a
theoretical cause of bugs and a matter of precaution but we'll need to
keep the semantic change in mind.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper btrfs_bio_alloc() is almost the same as btrfs_io_bio_alloc(),
except it's allocating using BIO_MAX_VECS as @nr_iovecs, and initializes
bio->bi_iter.bi_sector.
However the naming itself is not using "btrfs_io_bio" to indicate its
parameter is "strcut btrfs_io_bio" and can be easily confused with
"struct btrfs_bio".
Considering assigned bio->bi_iter.bi_sector is such a simple work and
there are already tons of call sites doing that manually, there is no
need to do that in a helper.
Remove btrfs_bio_alloc() helper, and enhance btrfs_io_bio_alloc()
function to provide a fail-safe value for its @nr_iovecs.
And then replace all btrfs_bio_alloc() callers with
btrfs_io_bio_alloc().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The structure btrfs_bio is used by two different sites:
- bio->bi_private for mirror based profiles
For those profiles (SINGLE/DUP/RAID1*/RAID10), this structures records
how many mirrors are still pending, and save the original endio
function of the bio.
- RAID56 code
In that case, RAID56 only utilize the stripes info, and no long uses
that to trace the pending mirrors.
So btrfs_bio is not always bind to a bio, and contains more info for IO
context, thus renaming it will make the naming less confusing.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After the first time we log a directory in the current transaction, for
each directory item in a changed leaf of the subvolume tree, we have to
check if we previously logged the item, in order to overwrite it in case
its data changed or skip it in case its data hasn't changed.
Checking if we have logged each item before not only wastes times, but it
also adds lock contention on the log tree. So in order to minimize the
number of times we do such checks, keep track of the offset of the last
key we logged for a directory and, on the next time we log the directory,
skip the checks for any new keys that have an offset greater than the
offset we have previously saved. This is specially effective for index
keys, because the offset for these keys comes from a monotonically
increasing counter.
This patch is part of a patchset comprised of the following 5 patches:
btrfs: remove root argument from btrfs_log_inode() and its callees
btrfs: remove redundant log root assignment from log_dir_items()
btrfs: factor out the copying loop of dir items from log_dir_items()
btrfs: insert items in batches when logging a directory when possible
btrfs: keep track of the last logged keys when logging a directory
This is patch 5/5.
The following test was used on a non-debug kernel to measure the impact
it has on a directory fsync:
$ cat test-dir-fsync.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
NUM_NEW_FILES=100000
NUM_FILE_DELETES=1000
mkfs.btrfs -f $DEV
mount -o ssd $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_NEW_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
# fsync the directory, this will log the new dir items and the inodes
# they point to, because these are new inodes.
start=$(date +%s%N)
xfs_io -c "fsync" $MNT/testdir
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "dir fsync took $dur ms after adding $NUM_NEW_FILES files"
# sync to force transaction commit and wipeout the log.
sync
del_inc=$(( $NUM_NEW_FILES / $NUM_FILE_DELETES ))
for ((i = 1; i <= $NUM_NEW_FILES; i += $del_inc)); do
rm -f $MNT/testdir/file_$i
done
# fsync the directory, this will only log dir items, there are no
# dentries pointing to new inodes.
start=$(date +%s%N)
xfs_io -c "fsync" $MNT/testdir
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "dir fsync took $dur ms after deleting $NUM_FILE_DELETES files"
umount $MNT
Test results with NUM_NEW_FILES set to 100 000 and 1 000 000:
**** before patchset, 100 000 files, 1000 deletes ****
dir fsync took 848 ms after adding 100000 files
dir fsync took 175 ms after deleting 1000 files
**** after patchset, 100 000 files, 1000 deletes ****
dir fsync took 758 ms after adding 100000 files (-11.2%)
dir fsync took 63 ms after deleting 1000 files (-94.1%)
**** before patchset, 1 000 000 files, 1000 deletes ****
dir fsync took 9945 ms after adding 1000000 files
dir fsync took 473 ms after deleting 1000 files
**** after patchset, 1 000 000 files, 1000 deletes ****
dir fsync took 8677 ms after adding 1000000 files (-13.6%)
dir fsync took 146 ms after deleting 1000 files (-105.6%)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a directory, we scan its directory items from the subvolume
tree and then copy one by one into the log tree. This is not efficient
since we generally are able to insert several items in a batch, using a
single btree operation for adding several items at once. The reason we
copy items one by one is that we must check if each item was previously
logged in the current transaction, and if it was we either overwrite it
or skip it in case its content did not change in the subvolume tree (this
can happen only for dir item keys, but not for dir index keys), and doing
such check makes it a bit cumbersome to attempt batch insertions.
However the chances for doing batch insertions are very frequent and
always happen when:
1) Logging the directory for the first time in the current transaction,
as none of the items exist in the log tree yet;
2) Logging new dir index keys, because the offset for new dir index keys
comes from a monotonically increasing counter. This means if we keep
adding dentries to a directory, through creation of new files and
sub-directories or by adding new links or renaming from some other
directory into the one we are logging, all the new dir index keys
have a new offset that is greater than the offset of any previously
logged index keys, so we can insert them in batches into the log tree.
For dir item keys, since their offset depends on the result of an hash
function against the dentry's name, unless the directory is being logged
for the first time in the current transaction, the chances being able to
insert the items in the log using batches is pretty much random and not
predictable, as it depends on the names of the dentries, but still happens
often enough.
So change directory logging to keep track of consecutive directory items
that don't exist yet in the log and batch insert them.
This patch is part of a patchset comprised of the following 5 patches:
btrfs: remove root argument from btrfs_log_inode() and its callees
btrfs: remove redundant log root assignment from log_dir_items()
btrfs: factor out the copying loop of dir items from log_dir_items()
btrfs: insert items in batches when logging a directory when possible
btrfs: keep track of the last logged keys when logging a directory
This is patch 4/5. The change log of the last patch (5/5) has performance
results.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In preparation for the next change, move the loop that processes a leaf
and copies its directory items to the log, into a separate helper
function. This makes the next change simpler and it also helps making
log_dir_items() a bit shorter (specially after the next change).
This patch is part of a patchset comprised of the following 5 patches:
btrfs: remove root argument from btrfs_log_inode() and its callees
btrfs: remove redundant log root assignment from log_dir_items()
btrfs: factor out the copying loop of dir items from log_dir_items()
btrfs: insert items in batches when logging a directory when possible
btrfs: keep track of the last logged keys when logging a directory
This is patch 3/5. The change log of the last patch (5/5) has performance
results.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At log_dir_items() we are assigning the exact same value to the local
variable 'log', once when it's declared and once again shortly after.
Remove the later assignment as it's pointless.
This patch is part of a patchset comprised of the following 5 patches:
btrfs: remove root argument from btrfs_log_inode() and its callees
btrfs: remove redundant log root assignment from log_dir_items()
btrfs: factor out the copying loop of dir items from log_dir_items()
btrfs: insert items in batches when logging a directory when possible
btrfs: keep track of the last logged keys when logging a directory
This is patch 2/5. The change log of the last patch (5/5) has performance
results.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The root argument passed to btrfs_log_inode() is unncessary, as it is
always the root of the inode we are going to log. This root also gets
unnecessarily propagated to several functions called by btrfs_log_inode(),
and all of them take the inode as an argument as well. So just remove
the root argument from these functions and have them get the root from
the inode where needed.
This patch is part of a patchset comprised of the following 5 patches:
btrfs: remove root argument from btrfs_log_inode() and its callees
btrfs: remove redundant log root assignment from log_dir_items()
btrfs: factor out the copying loop of dir items from log_dir_items()
btrfs: insert items in batches when logging a directory when possible
btrfs: keep track of the last logged keys when logging a directory
This is patch 1/5. The change log of the last patch (5/5) has performance
results.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The statement which decides if an extent allocation on a zoned device is
for the dedicated tree-log block group or not and if we can use the block
group we picked for this allocation is not easy to read but an important
part of the allocator.
Rewrite into an if condition instead of a plain boolean test to make it
stand out more, like the version which tests for the dedicated
data-relocation block group.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs code we have two functions called setup_extent_mapping, one in
the extent_map code and one in the relocation code. While both are
private to their respective implementation, this can still be confusing
for the reader.
So rename the version in relocation.c to setup_relocation_extent_mapping.
No functional changes.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we use a dedicated block group and regular writes for data
relocation, we can preallocate the space needed for a relocated inode,
just like we do in regular mode.
Essentially this reverts commit 32430c6148 ("btrfs: zoned: enable
relocation on a zoned filesystem") as it is not needed anymore.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Prepare for allowing preallocation for relocation inodes.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we have a dedicated block group for relocation, we can use
REQ_OP_WRITE instead of REQ_OP_ZONE_APPEND for writing out the data on
relocation.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Don't allow more than one process to add pages to a relocation inode on
a zoned filesystem, otherwise we cannot guarantee the sequential write
rule once we're filling preallocated extents on a zoned filesystem.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Relocation in a zoned filesystem can fail with a transaction abort with
error -22 (EINVAL). This happens because the relocation code assumes that
the extents we relocated the data to have the same size the source extents
had and ensures this by preallocating the extents.
But in a zoned filesystem we currently can't preallocate the extents as
this would break the sequential write required rule. Therefore it can
happen that the writeback process kicks in while we're still adding pages
to a delalloc range and starts writing out dirty pages.
This then creates destination extents that are smaller than the source
extents, triggering the following safety check in get_new_location():
1034 if (num_bytes != btrfs_file_extent_disk_num_bytes(leaf, fi)) {
1035 ret = -EINVAL;
1036 goto out;
1037 }
Temporarily create a dedicated block group for the relocation process, so
no non-relocation data writes can interfere with the relocation writes.
This is needed that we can switch the relocation process on a zoned
filesystem from the REQ_OP_ZONE_APPEND writing we use for data to a scheme
like in a non-zoned filesystem using REQ_OP_WRITE and preallocation.
Fixes: 32430c6148 ("btrfs: zoned: enable relocation on a zoned filesystem")
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several places in our codebase where we check if a root is the
root of the data reloc tree and subsequent patches will introduce more.
Factor out the check into a small helper function instead of open coding
it multiple times.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function repair_io_failure() is no longer used out of extent_io.c since
commit 8b9b6f2554 ("btrfs: scrub: cleanup the remaining nodatasum
fixup code"), which removes the last external caller.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a regular file in full sync mode, we are currently committing
its delayed inode item. This is to ensure that we never miss copying the
inode item, with its most up to date data, into the log tree.
However that is not necessary since commit e4545de5b0 ("Btrfs: fix fsync
data loss after append write"), because even if we don't find the leaf
with the inode item when looking for leaves that changed in the current
transaction, we end up logging the inode item later using the in-memory
content. In case we find the leaf containing the inode item, we already
end up using the in-memory inode for filling the inode item in the log
tree, and not the inode item that is in the fs/subvolume tree, as it
might be not up to date (copy_items() -> fill_inode_item()).
So don't commit the delayed inode item, which brings a couple of benefits:
1) Avoid writing the inode item to the fs/subvolume btree, saving time and
reducing lock contention on the btree;
2) In case no other item for the inode was changed, added or deleted in
the same leaf where the inode item is located, we ended up copying
all the items in that leaf to the log tree - it's harmless from a
functional point of view, but it wastes time and log tree space.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 10/10 and the following test results compare a branch with
the whole patch set applied versus a branch without any of the patches
applied.
The following script was used to test dbench with 8 and 16 jobs on a
machine with 12 cores, 64G of RAM, a NVME device and using a non-debug
kernel config (Debian's default):
$ cat test.sh
#!/bin/bash
if [ $# -ne 1 ]; then
echo "Use $0 NUM_JOBS"
exit 1
fi
NUM_JOBS=$1
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-m single -d single"
echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
dbench -D $MNT -t 120 $NUM_JOBS
umount $MNT
The results were the following:
8 jobs, before patchset:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 4113896 0.009 238.665
Close 3021699 0.001 0.590
Rename 174215 0.082 238.733
Unlink 830977 0.049 238.642
Deltree 96 2.232 8.022
Mkdir 48 0.003 0.005
Qpathinfo 3729013 0.005 2.672
Qfileinfo 653206 0.001 0.152
Qfsinfo 683866 0.002 0.526
Sfileinfo 335055 0.004 1.571
Find 1441800 0.016 4.288
WriteX 2049644 0.010 3.982
ReadX 6449786 0.003 0.969
LockX 13400 0.002 0.043
UnlockX 13400 0.001 0.075
Flush 288349 2.521 245.516
Throughput 1075.73 MB/sec 8 clients 8 procs max_latency=245.520 ms
8 jobs, after patchset:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 4154282 0.009 156.675
Close 3051450 0.001 0.843
Rename 175912 0.072 4.444
Unlink 839067 0.048 66.050
Deltree 96 2.131 5.979
Mkdir 48 0.002 0.004
Qpathinfo 3765575 0.005 3.079
Qfileinfo 659582 0.001 0.099
Qfsinfo 690474 0.002 0.155
Sfileinfo 338366 0.004 1.419
Find 1455816 0.016 3.423
WriteX 2069538 0.010 4.328
ReadX 6512429 0.003 0.840
LockX 13530 0.002 0.078
UnlockX 13530 0.001 0.051
Flush 291158 2.500 163.468
Throughput 1105.45 MB/sec 8 clients 8 procs max_latency=163.474 ms
+2.7% throughput, -40.1% max latency
16 jobs, before patchset:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 5457602 0.033 337.098
Close 4008979 0.002 2.018
Rename 231051 0.323 254.054
Unlink 1102209 0.202 337.243
Deltree 160 6.521 31.720
Mkdir 80 0.003 0.007
Qpathinfo 4946147 0.014 6.988
Qfileinfo 867440 0.001 1.642
Qfsinfo 907081 0.003 1.821
Sfileinfo 444433 0.005 2.053
Find 1912506 0.067 7.854
WriteX 2724852 0.018 7.428
ReadX 8553883 0.003 2.059
LockX 17770 0.003 0.350
UnlockX 17770 0.002 0.627
Flush 382533 2.810 353.691
Throughput 1413.09 MB/sec 16 clients 16 procs max_latency=353.696 ms
16 jobs, after patchset:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 5393156 0.034 303.181
Close 3961986 0.002 1.502
Rename 228359 0.320 253.379
Unlink 1088920 0.206 303.409
Deltree 160 6.419 30.088
Mkdir 80 0.003 0.004
Qpathinfo 4887967 0.015 7.722
Qfileinfo 857408 0.001 1.651
Qfsinfo 896343 0.002 2.147
Sfileinfo 439317 0.005 4.298
Find 1890018 0.073 8.347
WriteX 2693356 0.018 6.373
ReadX 8453485 0.003 3.836
LockX 17562 0.003 0.486
UnlockX 17562 0.002 0.635
Flush 378023 2.802 315.904
Throughput 1454.46 MB/sec 16 clients 16 procs max_latency=315.910 ms
+2.9% throughput, -11.3% max latency
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging an extent, in the fast fsync path, we always attempt do drop
or trim any existing extents with a range that match or overlap the range
of the extent we are about to log. We do that through a call to
btrfs_drop_extents().
However this is not needed when we are logging the inode for the first
time in the current transaction, since we have no inode items of the
inode in the log tree. Calling btrfs_drop_extents() does a deletion search
on the log tree, which is expensive when we have concurrent tasks
accessing the log tree because a deletion search always acquires a write
lock on the extent buffers at levels 2, 1 and 0, adding significant lock
contention, specially taking into account the height of a log tree rarely
(if ever) goes beyond 2 or 3, due to its short life.
So skip the call to btrfs_drop_extents() when the inode was not previously
logged in the current transaction.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 9/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we are logging that an inode exists and the inode was not logged
before, we can avoid searching in the log tree for the inode item since we
know it does not exists. That wastes time and adds more lock contention on
the extent buffers of the log tree when there are other tasks that are
logging other inodes.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 8/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Whenever we are logging a file inode in full sync mode we call
btrfs_truncate_inode_items() to delete items of the inode we may have
previously logged.
That results in doing a btree search for deletion, which is expensive
because it always acquires write locks for extent buffers at levels 2, 1
and 0, and it balances any node that is less than half full. Acquiring
the write locks can block the task if the extent buffers are already
locked by another task or block other tasks attempting to lock them,
which is specially bad in case of log trees since they are small due to
their short life, with a root node at a level typically not greater than
level 2.
If we know that we are logging the inode for the first time in the current
transaction, we can skip the call to btrfs_truncate_inode_items(), avoiding
the deletion search. This change does that.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 7/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move the call to btrfs_truncate_inode_items(), and the surrounding retry
loop, into a local helper function. This avoids some repetition and avoids
making the next change a bit awkward due to a bit of too much indentation.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 6/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Whenever we are logging a directory inode, logging that an inode exists or
logging an inode that has changes in its references or xattrs, we attempt
to delete items of this inode we may have previously logged (through calls
to drop_objectid_items()).
That attempt does a btree search for deletion, which is expensive because
it always acquires write locks for extent buffers at levels 2, 1 and 0,
and it balances any node that is less than half full. Acquiring the write
locks can block the task if the extent buffers are already locked or block
other tasks attempting to lock them, which is specially bad in case of log
trees since they are small due to their short life, with a root node at a
level typically not greater than level 2.
If we know that we are logging the inode for the first time in the current
transaction, we can skip the search. This change does that.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 5/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we are logging a new name for an inode, due to a link or rename
operation, if the inode has ancestor inodes that are new, created in the
current transaction, we need to log that these inodes exist. To ensure
that a subsequent explicit fsync on one of these ancestor inodes does
sync the log, we don't set the logged_trans field of these inodes.
This was done in commit 75b463d2b4 ("btrfs: do not commit logs and
transactions during link and rename operations"), to avoid syncing a
log after a rename or link operation.
In order to allow for future changes to do some optimizations, change
this behaviour to always update the logged_trans of any logged inode
and don't update the last_log_commit of the inode if we are logging
that it exists. This accomplishes that same objective with simpler
logic, allowing for some optimizations in the next patches.
So just do that simplification.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 4/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a new name for an inode, due to a link or rename operation,
we don't need to log all new dentries of the parent directories and their
subdirectories. We only want to log the names of the inode and that any
new parent directories exist. So in this case don't trigger logging of
the new dentries, that is only need when doing an explicit fsync on a
directory or on a file which requires logging its parent directories.
This avoids unnecessary work and reduces contention on the extent buffers
of a log tree.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 3/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit 75b463d2b4 ("btrfs: do not commit logs and transactions
during link and rename operations"), we always pass a non-NULL log context
to btrfs_log_inode_parent() and therefore to all the functions that it
calls. So remove the checks we have all over the place that test for a
NULL log context, making the code shorter and easier to read, as well as
reducing the size of the generated code.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 2/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In case an inode was never logged since it was loaded from disk and was
modified in the current transaction (its ->last_trans matches the ID of
the current transaction), inode_logged() returns true even if there's no
existing log tree. In this case we can simply check if a log tree exists
and return false if it does not. This avoids a caller of inode_logged()
doing some unnecessary, but harmless, work.
For btrfs_log_new_name() it avoids it logging an inode in case it was
never logged since it was loaded from disk and there is currently no log
tree for the inode's root. For the remaining callers of inode_logged(),
btrfs_del_dir_entries_in_log() and btrfs_del_inode_ref_in_log(), it has
no effect since they already check if a log tree exists through their
calls to join_running_log_trans().
So just add a check to inode_logged() to verify if a log tree exists, and
return false if it does not.
This patch is part of a patch set comprised of the following patches:
btrfs: check if a log tree exists at inode_logged()
btrfs: remove no longer needed checks for NULL log context
btrfs: do not log new dentries when logging that a new name exists
btrfs: always update the logged transaction when logging new names
btrfs: avoid expensive search when dropping inode items from log
btrfs: add helper to truncate inode items when logging inode
btrfs: avoid expensive search when truncating inode items from the log
btrfs: avoid search for logged i_size when logging inode if possible
btrfs: avoid attempt to drop extents when logging inode for the first time
btrfs: do not commit delayed inode when logging a file in full sync mode
This is patch 1/10 and test results are listed in the change log of the
last patch in the set.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There were few lockdep warnings because btrfs_show_devname() was using
device_list_mutex as recorded in the commits:
0ccd05285e ("btrfs: fix a possible umount deadlock")
779bf3fefa ("btrfs: fix lock dep warning, move scratch dev out of device_list_mutex and uuid_mutex")
And finally, commit 88c14590cd ("btrfs: use RCU in btrfs_show_devname
for device list traversal") removed the device_list_mutex from
btrfs_show_devname for performance reasons.
This patch removes a stale comment about the function
btrfs_show_devname and device_list_mutex.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The test case btrfs/238 reports the warning below:
WARNING: CPU: 3 PID: 481 at fs/btrfs/super.c:2509 btrfs_show_devname+0x104/0x1e8 [btrfs]
CPU: 2 PID: 1 Comm: systemd Tainted: G W O 5.14.0-rc1-custom #72
Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
btrfs_show_devname+0x108/0x1b4 [btrfs]
show_mountinfo+0x234/0x2c4
m_show+0x28/0x34
seq_read_iter+0x12c/0x3c4
vfs_read+0x29c/0x2c8
ksys_read+0x80/0xec
__arm64_sys_read+0x28/0x34
invoke_syscall+0x50/0xf8
do_el0_svc+0x88/0x138
el0_svc+0x2c/0x8c
el0t_64_sync_handler+0x84/0xe4
el0t_64_sync+0x198/0x19c
Reason:
While btrfs_prepare_sprout() moves the fs_devices::devices into
fs_devices::seed_list, the btrfs_show_devname() searches for the devices
and found none, leading to the warning as in above.
Fix:
latest_dev is updated according to the changes to the device list.
That means we could use the latest_dev->name to show the device name in
/proc/self/mounts, the pointer will be always valid as it's assigned
before the device is deleted from the list in remove or replace.
The RCU protection is sufficient as the device structure is freed after
synchronization.
Reported-by: Su Yue <l@damenly.su>
Tested-by: Su Yue <l@damenly.su>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In preparation to fix a bug in btrfs_show_devname().
Convert fs_devices::latest_bdev type from struct block_device to struct
btrfs_device and, rename the member to fs_devices::latest_dev.
So that btrfs_show_devname() can use fs_devices::latest_dev::name.
Tested-by: Su Yue <l@damenly.su>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We will no longer write to a relocating block group. So, we can finish it
now.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have written to the zone capacity, the device automatically
deactivates the zone. Sync up block group side (the active BG list and
zone_is_active flag) with it.
We need to do it both on data BGs and metadata BGs. On data side, we add a
hook to btrfs_finish_ordered_io(). On metadata side, we use
end_extent_buffer_writeback().
To reduce excess lookup of a block group, we mark the last extent buffer in
a block group with EXTENT_BUFFER_ZONE_FINISH flag. This cannot be done for
data (ordered_extent), because the address may change due to
REQ_OP_ZONE_APPEND.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The current extent allocator tries to allocate a new block group when the
existing block groups do not have enough space. On a ZNS device, a new
block group means a new active zone. If the number of active zones has
already reached the max_active_zones, activating a new zone needs to finish
an existing zone, leading to wasting the free space there.
So, instead, it should reuse the existing active block groups as much as
possible when we can't activate any other zones without sacrificing an
already activated block group.
While at it, I converted find_free_extent_update_loop() to check the
found_extent() case early and made the other conditions simpler.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are passing too many variables as it is from btrfs_reserve_extent() to
find_free_extent(). The next commit will add min_alloc_size to ffe_ctl, and
that means another pass-through argument. Take this opportunity to move
ffe_ctl one level up and drop the redundant arguments.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Activate new block group at btrfs_make_block_group(). We do not check the
return value. If failed, we can try again later at the actual extent
allocation phase.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Activate a block group when trying to allocate an extent from it. We check
read-only case and no space left case before trying to activate a block
group not to consume the number of active zones uselessly.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Load activeness of underlying zones of a block group. When underlying zones
are active, we add the block group to the fs_info->zone_active_bgs list.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add zone_is_active flag to btrfs_block_group. This flag indicates the
underlying zones are all active. Such zone active block groups are tracked
by fs_info->active_bg_list.
btrfs_dev_{set,clear}_active_zone() take responsibility for the underlying
device part. They set/clear the bitmap to indicate zone activeness and
count the number of zones we can activate left.
btrfs_zone_{activate,finish}() take responsibility for the logical part and
the list management. In addition, btrfs_zone_finish() wait for any writes
on it and send REQ_OP_ZONE_FINISH to the zone.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We will use a block group's physical location to track active zones and
finish fully written zones in the following commits. Since the zone
activation is done in the extent allocation context which already holding
the tree locks, we can't query the chunk tree for the physical locations.
So, copy the location info into a block group and use it for activation.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The ZNS specification defines a limit on the number of zones that can be in
the implicit open, explicit open or closed conditions. Any zone with such
condition is defined as an active zone and correspond to any zone that is
being written or that has been only partially written. If the maximum
number of active zones is reached, we must either reset or finish some
active zones before being able to chose other zones for storing data.
Load queue_max_active_zones() and track the number of active zones left on
the device.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If there is no more space left for a new superblock in a superblock zone,
then it is better to ZONE_FINISH the zone and frees up the active zone
count.
Since btrfs_advance_sb_log() can now issue REQ_OP_ZONE_FINISH, we also need
to convert it to return int for the error case.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
sb_write_pointer() returns the write position of next superblock. For READ,
we need a previous location. When the pointer is at the head, the previous
one is the last one of the other zone. Calculate the last one's position
from zone capacity.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We cannot write beyond zone capacity. So, we should consider a zone as
"full" when the write pointer goes beyond capacity - the size of super
info.
Also, take this opportunity to replace a subtle duplicated code with a loop
and fix a typo in comment.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the introduction of zone capacity, the range [capacity, length] is
always zone unusable. Counting this region as a reclaim target will
cause reclaiming too early. Reclaim block groups based on bytes that can
be usable after resetting.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we introduced capacity in a block group, we need to calculate free
space using the capacity instead of the length. Thus, bytes we account
capacity - alloc_pointer as free, and account bytes [capacity, length] as
zone unusable.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_free_excluded_extents() is not neccessary for
btrfs_calc_zone_unusable() and it makes btrfs_calc_zone_unusable()
difficult to reuse. Move it out and call btrfs_free_excluded_extents()
in proper context.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The ZNS specification introduces the concept of a Zone Capacity. A zone
capacity is an additional per-zone attribute that indicates the number of
usable logical blocks within each zone, starting from the first logical
block of each zone. It is always smaller or equal to the zone size.
With the SINGLE profile, we can set a block group's "capacity" as the same
as the underlying zone's Zone Capacity. We will limit the allocation not
to exceed in a following commit.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the new infrastructure which has taken subpage into consideration,
now we should be safe to allow defrag to work for subpage case.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now the old infrastructure can all be removed, defrag
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function defrag_one_cluster() is able to defrag one range well
enough, we only need to do preparation for it, including:
- Clamp and align the defrag range
- Exclude invalid cases
- Proper inode locking
The old infrastructures will not be removed in this patch, as it would
be too noisy to review.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This new helper, defrag_one_cluster(), will defrag one cluster (at most
256K):
- Collect all initial targets
- Kick in readahead when possible
- Call defrag_one_range() on each initial target
With some extra range clamping.
- Update @sectors_defragged parameter
This involves one behavior change, the defragged sectors accounting is
no longer as accurate as old behavior, as the initial targets are not
consistent.
We can have new holes punched inside the initial target, and we will
skip such holes later.
But the defragged sectors accounting doesn't need to be that accurate
anyway, thus I don't want to pass those extra accounting burden into
defrag_one_range().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A new helper, defrag_one_range(), is introduced to defrag one range.
This function will mostly prepare the needed pages and extent status for
defrag_one_locked_target().
As we can only have a consistent view of extent map with page and extent
bits locked, we need to re-check the range passed in to get a real
target list for defrag_one_locked_target().
Since defrag_collect_targets() will call defrag_lookup_extent() and lock
extent range, we also need to teach those two functions to skip extent
lock. Thus new parameter, @locked, is introduced to skip extent lock if
the caller has already locked the range.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A new helper, defrag_one_locked_target(), introduced to do the real part
of defrag.
The caller needs to ensure both page and extents bits are locked, and no
ordered extent exists for the range, and all writeback is finished.
The core defrag part is pretty straight-forward:
- Reserve space
- Set extent bits to defrag
- Update involved pages to be dirty
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a helper, defrag_collect_targets(), to collect all possible
targets to be defragged.
This function will not consider things like max_sectors_to_defrag, thus
caller should be responsible to ensure we don't exceed the limit.
This function will be the first stage of later defrag rework.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In cluster_pages_for_defrag(), we have complex code block inside one
for() loop.
The code block is to prepare one page for defrag, this will ensure:
- The page is locked and set up properly.
- No ordered extent exists in the page range.
- The page is uptodate.
This behavior is pretty common and will be reused by later defrag
rework.
So factor out the code into its own helper, defrag_prepare_one_page(),
for later usage, and cleanup the code by a little.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When testing subpage defrag support, I always find some strange inode
nbytes error, after a lot of debugging, it turns out that
defrag_lookup_extent() is using PAGE_SIZE as size for
lookup_extent_mapping().
Since lookup_extent_mapping() is calling __lookup_extent_mapping() with
@strict == 1, this means any extent map smaller than one page will be
ignored, prevent subpage defrag to grab a correct extent map.
There are quite some PAGE_SIZE usage in ioctl.c, but most of them are
correct usages, and can be one of the following cases:
- ioctl structure size check
We want ioctl structure to be contained inside one page.
- real page operations
The remaining cases in defrag_lookup_extent() and
check_defrag_in_cache() will be addressed in this patch.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In function cluster_pages_for_defrag() we have a window where we unlock
page, either start the ordered range or read the content from disk.
When we re-lock the page, we need to make sure it still has the correct
page->private for subpage.
Thus add the extra PagePrivate check here to handle subpage cases
properly.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_defrag_file() accepts both "struct inode" and "struct
file" as parameter. We can easily grab "struct inode" from "struct
file" using file_inode() helper.
The reason why we need "struct file" is just to re-use its f_ra.
Change this to pass "struct file_ra_state" parameter, so that it's more
clear what we really want. Since we're here, also add some comments on
the function btrfs_defrag_file().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_chunk_readonly() checks if the given chunk is writeable. It
returns 1 for readonly, and 0 for writeable. So the return argument type
bool shall suffice instead of the current type int.
Also, rename btrfs_chunk_readonly() to btrfs_chunk_writeable() as we
check if the bg is writeable, and helps to keep the logic at the parent
function simpler to understand.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix a warning reported by smatch that ret could be returned without
initialized. The dedupe operations are supposed to to return 0 for a 0
length range but the caller does not pass olen == 0. To keep this
behaviour and also fix the warning initialize ret to 0.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we use u16 bitmap to make 4k sectorsize work for 64K page
size.
But this u16 bitmap is not large enough to contain larger page size like
128K, nor is space efficient for 16K page size.
To handle both cases, here we pack all subpage bitmaps into a larger
bitmap, now btrfs_subpage::bitmaps[] will be the ultimate bitmap for
subpage usage.
Each sub-bitmap will has its start bit number recorded in
btrfs_subpage_info::*_start, and its bitmap length will be recorded in
btrfs_subpage_info::bitmap_nr_bits.
All subpage bitmap operations will be converted from using direct u16
operations to bitmap operations, with above *_start calculated.
For 64K page size with 4K sectorsize, this should not cause much
difference.
While for 16K page size, we will only need 1 unsigned long (u32) to
store all the bitmaps, which saves quite some space.
Furthermore, this allows us to support larger page size like 128K and
258K.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we use fixed size u16 bitmap for subpage bitmap. This is fine
for 4K sectorsize with 64K page size.
But for 4K sectorsize and larger page size, the bitmap is too small,
while for smaller page size like 16K, u16 bitmaps waste too much space.
Here we introduce a new helper structure, btrfs_subpage_bitmap_info, to
record the proper bitmap size, and where each bitmap should start at.
By this, we can later compact all subpage bitmaps into one u32 bitmap.
This patch is the first step.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The existing calling convention of btrfs_alloc_subpage() is pretty
awful. Change it to a more common pattern by returning struct
btrfs_subpage directly and let the caller to determine if the call
succeeded.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are two call sites of btrfs_alloc_subpage():
- btrfs_attach_subpage()
We have ensured sectorsize is smaller than PAGE_SIZE
- alloc_extent_buffer()
We call btrfs_alloc_subpage() unconditionally.
The alloc_extent_buffer() forces us to check the sectorsize size against
page size inside btrfs_alloc_subpage().
Since the function name, btrfs_alloc_subpage(), already indicates it
should only get called for subpage cases, do the check in
alloc_extent_buffer() and add an ASSERT() in btrfs_alloc_subpage().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update it since commit 944d3f9fac ("btrfs: switch seed device to
list api") did conversion from fs_devices::seed to fs_devices::seed_list.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no need for the variable ret after d66105cfa873 ("btrfs:
allocate btrfs_ioctl_quota_rescan_args on stack"), remove it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The out label is being overused, we can simply return if the condition
permits.
No functional changes.
Reviewed-by: Su Yue <l@damenly.su>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The user facing function used to allocate new chunks is
btrfs_chunk_alloc, unfortunately there is yet another similar sounding
function - btrfs_alloc_chunk. This creates confusion, especially since
the latter function can be considered "private" in the sense that it
implements the first stage of chunk creation and as such is called by
btrfs_chunk_alloc.
To avoid the awkwardness that comes with having similarly named but
distinctly different in their purpose function rename btrfs_alloc_chunk
to btrfs_create_chunk, given that the main purpose of this function is
to orchestrate the whole process of allocating a chunk - reserving space
into devices, deciding on characteristics of the stripe size and
creating the in-memory structures.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The second argument was only used by the USB gadget code, yet everyone
pays the overhead of passing a zero to be passed into aio, where it
ends up being part of the aio res2 value.
Now that everybody is passing in zero, kill off the extra argument.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ioprio setup doesn't depend on other fields that are modified in
io_prep_rw() and we can move it down in the function without worrying
about performance. It's useful as it makes iocb->ki_flags
accesses/modifications closer together, so it's more likely the compiler
will cache it in a register and avoid extra reloads.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8ee98779c06f1b59f6039b1e292db4332efd664b.1634987320.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
opcode prep functions are one of the first things that are called, we
can't have ->async_data allocated at this point and it's certainly a
bug. Reflect this assumption in io_timeout_prep() and add a WARN_ONCE
just in case.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/75a28ca7dbcc5af8b6cd9092819e8384c24dedd4.1634987320.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If an opcode doesn't support polling, just let it be executed
synchronously in iowq, otherwise it will do a nonblock attempt just to
fail in io_arm_poll_handler() and return back to blocking execution.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6401256db01b88f448f15fcd241439cb76f5b940.1634987320.git.asml.silence@gmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
->pollout or ->pollin are set only for opcodes that need a file, so if
io_arm_poll_handler() tests them first we can be sure that the request
has file set and the ->file check can be removed.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9adfe4f543d984875e516fce6da35348aab48668.1634987320.git.asml.silence@gmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we've got IO_WQ_WORK_CANCEL in io_wq_submit_work(), handle the error
on the same lines as the check instead of having a weird code flow. The
main loop doesn't change but goes one indention left.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ff4a09cf41f7a22bbb294b6f1faea721e21fe615.1634987320.git.asml.silence@gmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Do a bit of cleaning for the main loop of io_wq_submit_work(). Get rid
of switch, just replace it with a single if as we're retrying in both
other cases. Kill issue_sqe label, Get rid of needs_poll nesting and
disambiguate a bit the comment.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ed12ce0c64e051f9a6b8a37a24f8ea554d299c29.1634987320.git.asml.silence@gmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coverity complains of an unused value:
CID 119623 (#1 of 1): Unused value (UNUSED_VALUE)
assigned_value: Assigning value -1 to error here, but that stored value is
overwritten before it can be used.
237 error = -EPERM;
Fix it by removing the assignment.
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add a might_sleep call into gfs2_glock_put which can sleep in DLM when
the last reference is released. This will show problems earlier, and
not only when the last reference is put.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
So far, glock_hash_walk took a reference on each glock it iterated over, and it
was the examiner's responsibility to drop those references. Dropping the final
reference to a glock can sleep and the examiners are called in a RCU critical
section with spin locks held, so examiners that didn't need the extra reference
had to drop it asynchronously via gfs2_glock_queue_put or similar. This wasn't
done correctly in thaw_glock which did call gfs2_glock_put, and not at all in
dump_glock_func.
Change glock_hash_walk to not take glock references at all. That way, the
examiners that don't need them won't have to bother with slow asynchronous
puts, and the examiners that do need references can take them themselves.
Reported-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_inode_lookup and gfs2_create_inode, we're calling
gfs2_cancel_delete_work which currently cancels any remote delete work
(delete_work_func) synchronously. This means that if the work is
currently running, it will wait for it to finish. We're doing this to
pevent a previous instance of an inode from having any influence on the
next instance.
However, delete_work_func uses gfs2_inode_lookup internally, and we can
end up in a deadlock when delete_work_func gets interrupted at the wrong
time. For example,
(1) An inode's iopen glock has delete work queued, but the inode
itself has been evicted from the inode cache.
(2) The delete work is preempted before reaching gfs2_inode_lookup.
(3) Another process recreates the inode (gfs2_create_inode). It tries
to cancel any outstanding delete work, which blocks waiting for
the ongoing delete work to finish.
(4) The delete work calls gfs2_inode_lookup, which blocks waiting for
gfs2_create_inode to instantiate and unlock the new inode =>
deadlock.
It turns out that when the delete work notices that its inode has been
re-instantiated, it will do nothing. This means that it's safe to
cancel the delete work asynchronously. This prevents the kind of
deadlock described above.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, function gfs2_create_inode called glock_set_object to
set the gl_object for inode and iopen glocks before the glock was locked.
That's wrong because other competing processes like evict may be
blocked waiting for the glock and still have gl_object set before the
actual eviction can take place.
This patch moves the call to glock_set_object until after the glock is
acquire in function gfs2_create_inode, so it waits for possibly
competing evicts to finish their processing first.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The new GLF_INSTANTIATE_NEEDED flag obsoletes the old rgrp flag
GFS2_RDF_UPTODATE, so this patch replaces it like we did with inodes.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
With the addition of the new GLF_INSTANTIATE_NEEDED flag, the
GIF_INVALID flag is now redundant. This patch removes it.
Since inode_instantiate is only called when instantiation is needed,
the check in inode_instantiate is removed too.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, when a glock was locked, the very first holder on the
queue would unlock the lockref and call the go_instantiate glops function
(if one existed), unless GL_SKIP was specified. When we introduced the new
node-scope concept, we allowed multiple holders to lock glocks in EX mode
and share the lock.
But node-scope introduced a new problem: if the first holder has GL_SKIP
and the next one does NOT, since it is not the first holder on the queue,
the go_instantiate op was not called. Eventually the GL_SKIP holder may
call the instantiate sub-function (e.g. gfs2_rgrp_bh_get) but there was
still a window of time in which another non-GL_SKIP holder assumes the
instantiate function had been called by the first holder. In the case of
rgrp glocks, this led to a NULL pointer dereference on the buffer_heads.
This patch tries to fix the problem by introducing two new glock flags:
GLF_INSTANTIATE_NEEDED, which keeps track of when the instantiate function
needs to be called to "fill in" or "read in" the object before it is
referenced.
GLF_INSTANTIATE_IN_PROG which is used to determine when a process is
in the process of reading in the object. Whenever a function needs to
reference the object, it checks the GLF_INSTANTIATE_NEEDED flag, and if
set, it sets GLF_INSTANTIATE_IN_PROG and calls the glops "go_instantiate"
function.
As before, the gl_lockref spin_lock is unlocked during the IO operation,
which may take a relatively long amount of time to complete. While
unlocked, if another process determines go_instantiate is still needed,
it sees GLF_INSTANTIATE_IN_PROG is set, and waits for the go_instantiate
glop operation to be completed. Once GLF_INSTANTIATE_IN_PROG is cleared,
it needs to check GLF_INSTANTIATE_NEEDED again because the other process's
go_instantiate operation may not have been successful.
Functions that previously called the instantiate sub-functions now call
directly into gfs2_instantiate so the new bits are managed properly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function do_promote had a section of code that did
the actual instantiation. This patch splits that off into its own
function, gfs2_instantiate, which prepares us for the next patch that
will use that function.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch further simplifies function do_promote by eliminating some
redundant code in favor of using a lock_released flag. This is just
prep work for a future patch.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch simply re-factors function do_promote to reduce the indents.
The logic should be unchanged. This makes future patches more readable.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Remove the 'first' argument of trace_gfs2_promote: with GL_SKIP, the
'first' holder isn't the one that instantiates the glock
(gl_instantiate), which is what the 'first' flag was apparently supposed
to indicate.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, the go_lock glock operations (glops) did not do
any actual locking. They were used to instantiate objects, like reading
in dinodes and rgrps from the media.
This patch renames the functions to go_instantiate for clarity.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, failed consistency checks printed out the object
that failed, but not the object's glock. This patch makes it also
print out the object glock so we can see the glock's holders and flags
to aid with debugging.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, if function gfs2_inode_lookup encountered an error
after it had locked the iopen glock, it never unlocked it, relying on
the evict code to do the cleanup. The evict code then took the
inode glock while holding the iopen glock, which violates the locking
order. For example,
(1) node A does a gfs2_inode_lookup that fails, leaving the iopen glock
locked.
(2) node B calls delete_work_func -> gfs2_lookup_by_inum ->
gfs2_inode_lookup. It locks the inode glock and blocks trying to
lock the iopen glock, which is held by node A.
(3) node A eventually calls gfs2_evict_inode -> evict_should_delete.
It blocks trying to lock the inode glock, which is now held by
node B.
This patch introduces error handling to function gfs2_inode_lookup
so it properly dequeues held iopen glocks on errors.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, when a glock was locked by function gfs2_glock_nq_init,
it initialized the holder gh_ip (return address) as gfs2_glock_nq_init.
That made it extremely difficult to track down problems because many
functions call gfs2_glock_nq_init. This patch changes the function so
that it saves gh_ip from the caller of gfs2_glock_nq_init, which makes
it easy to backtrack which holder took the lock.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, function do_gfs2_set_flags checked if the append
and immutable flags were being set while already set. If so, error -EPERM
was given. There's no reason why these two flags should be mutually
exclusive, and if you set them separately, you will, in essence, set
one while it is already set. For example:
chattr +a /mnt/gfs2/file1
chattr +i /mnt/gfs2/file1
The first command sets the append-only flag. Since they are additive,
the second command sets the immutable flag AND append-only flag,
since they both coexist in i_diskflags. So the second command should
not return an error. This bug caused xfstests generic/545 to fail.
This patch simply removes the invalid checks.
I also eliminated an unused parm from do_gfs2_set_flags.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In rgrp.c, there are several places where it does BUG_ON. This tells us
the call stack but nothing more, which is not very helpful.
This patch switches them to GLOCK_BUG_ON which also prints the glock,
its holders, and many of the rgrp values, which will help us debug
problems in the future.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, each individual "go_lock" glock operation (glop)
checked the GL_SKIP flag, and if set, would skip further processing.
This patch changes the logic so the go_lock caller, function go_promote,
checks the GL_SKIP flag before calling the go_lock op in the first place.
This avoids having to unnecessarily unlock gl_lockref.lock only to
re-lock it again.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Somehow, the GL_SKIP flag was missed when dumping glock holders.
This patch adds it to function hflags2str. I added it at the end because
I wanted Holder and Skip flags together to read "Hs" rather than "sH"
to avoid confusion with "Shared" ("SH") holder state.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function gfs2_rgrp_go_lock checked if GL_SKIP and
ar_rgrplvb were both true. However, GL_SKIP is only set for rgrps if
ar_rgrplvb is true (see gfs2_inplace_reserve). This patch simply removes
the redundant check.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Also disable page faults during direct I/O requests and implement a
similar kind of retry logic as in the buffered I/O case.
The retry logic in the direct I/O case differs from the buffered I/O
case in the following way: direct I/O doesn't provide the kinds of
consistency guarantees between concurrent reads and writes that buffered
I/O provides, so once we lose the inode glock while faulting in user
pages, we always resume the operation. We never need to return a
partial read or write.
This locking problem was originally reported by Jan Kara. Linus came up
with the idea of disabling page faults. Many thanks to Al Viro and
Matthew Wilcox for their feedback.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Currently, ->lru is a way to arrange non-LRU pages and has some
in-kernel users. In order to minimize noticable issues of page
reclaim and cache thrashing under high memory presure, limited
temporary pages were all chained with ->lru and can be reused
during the request. However, it seems that ->lru could be removed
when folio is landing.
Let's use page->private to chain temporary pages for now instead
and transform EROFS formally after the topic of the folio / file
page design is finalized.
Link: https://lore.kernel.org/r/20211022090120.14675-1-hsiangkao@linux.alibaba.com
Cc: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Pull autofs fix from Al Viro:
"Fix for a braino of mine (in getting rid of open-coded
dentry_path_raw() in autofs a couple of cycles ago).
Mea culpa... Obvious -stable fodder"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
autofs: fix wait name hash calculation in autofs_wait()
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmFzb/4ACgkQiiy9cAdy
T1HhOQv/bTsGX85V5QFBQyW7F7ymYaSuDpvb/nYFzzs4fMz8/lbCJ6GQHMK7G+uR
ZYFdZw5c5A+KsfjRoRAKOc6HJbGERnKWvIlRkNWnmcpsXcR3PFhhOxXKXxCTBjga
fHxAJBENbsyCtGz25pUtuOKVG9zVaz31lyXgnz53b0ATrb8CxIll7zdKTp7aGdK0
UIWUEYeUwctIhvyBXyms8ni+15keop6/7Y1KhUvodL/VhU4YCkKerFFQojsqLEBk
4N6ZrgEEvzZPSjMt3KkbAapMNvf8Jgy6hKrB10MWB2sJG3bG1A4MuWYzVz7hlLbx
KXztSjbEiExCw7Y8ZXeA0pT/P51TVB9uxSLaDJhGVrXIxkZ4exUz2pS0Tp2E8eMH
4BGylAV9vrZqjmF3HQHJu8c/+f833dwbmMzgDFlFgR01U8NQYQvLf6ZoxmnQxdJC
5CVzO2rGV1bAVEbCJAN/wnKSCpEzjcN0ruz9bcje8MFF9mXXiJxATIgNahuaj17t
AvOnAbwd
=FhM8
-----END PGP SIGNATURE-----
Merge tag '5.15-rc6-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull ksmbd fixes from Steve French:
"Ten fixes for the ksmbd kernel server, for improved security and
additional buffer overflow checks:
- a security improvement to session establishment to reduce the
possibility of dictionary attacks
- fix to ensure that maximum i/o size negotiated in the protocol is
not less than 64K and not more than 8MB to better match expected
behavior
- fix for crediting (flow control) important to properly verify that
sufficient credits are available for the requested operation
- seven additional buffer overflow, buffer validation checks"
* tag '5.15-rc6-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: add buffer validation in session setup
ksmbd: throttle session setup failures to avoid dictionary attacks
ksmbd: validate OutputBufferLength of QUERY_DIR, QUERY_INFO, IOCTL requests
ksmbd: validate credit charge after validating SMB2 PDU body size
ksmbd: add buffer validation for smb direct
ksmbd: limit read/write/trans buffer size not to exceed 8MB
ksmbd: validate compound response buffer
ksmbd: fix potencial 32bit overflow from data area check in smb2_write
ksmbd: improve credits management
ksmbd: add validation in smb2_ioctl
Add a done_before argument to iomap_dio_rw that indicates how much of
the request has already been transferred. When the request succeeds, we
report that done_before additional bytes were tranferred. This is
useful for finishing a request asynchronously when part of the request
has already been completed synchronously.
We'll use that to allow iomap_dio_rw to be used with page faults
disabled: when a page fault occurs while submitting a request, we
synchronously complete the part of the request that has already been
submitted. The caller can then take care of the page fault and call
iomap_dio_rw again for the rest of the request, passing in the number of
bytes already tranferred.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
In iomap_dio_rw, when iomap_apply returns an -EFAULT error and the
IOMAP_DIO_PARTIAL flag is set, complete the request synchronously and
return a partial result. This allows the caller to deal with the page
fault and retry the remainder of the request.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
When a user copy fails in one of the helpers of iomap_dio_rw, fail with
-EFAULT instead of returning 0. This matches what iomap_dio_bio_actor
returns when it gets an -EFAULT from bio_iov_iter_get_pages. With these
changes, iomap_dio_actor now consistently fails with -EFAULT when a user
page cannot be faulted in.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In the .read_iter and .write_iter file operations, we're accessing
user-space memory while holding the inode glock. There is a possibility
that the memory is mapped to the same file, in which case we'd recurse
on the same glock.
We could detect and work around this simple case of recursive locking,
but more complex scenarios exist that involve multiple glocks,
processes, and cluster nodes, and working around all of those cases
isn't practical or even possible.
Avoid these kinds of problems by disabling page faults while holding the
inode glock. If a page fault would occur, we either end up with a
partial read or write or with -EFAULT if nothing could be read or
written. In either case, we know that we're not done with the
operation, so we indicate that we're willing to give up the inode glock
and then we fault in the missing pages. If that made us lose the inode
glock, we return a partial read or write. Otherwise, we resume the
operation.
This locking problem was originally reported by Jan Kara. Linus came up
with the idea of disabling page faults. Many thanks to Al Viro and
Matthew Wilcox for their feedback.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ywLV
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.15-2021-10-22' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two fixes for the max workers limit API that was introduced this
series: one fix for an issue with that code, and one fixing a linked
timeout regression in this series"
* tag 'io_uring-5.15-2021-10-22' of git://git.kernel.dk/linux-block:
io_uring: apply worker limits to previous users
io_uring: fix ltimeout unprep
io_uring: apply max_workers limit to all future users
io-wq: max_worker fixes
The current logic of requests with IOSQE_ASYNC is first queueing it to
io-worker, then execute it in a synchronous way. For unbound works like
pollable requests(e.g. read/write a socketfd), the io-worker may stuck
there waiting for events for a long time. And thus other works wait in
the list for a long time too.
Let's introduce a new way for unbound works (currently pollable
requests), with this a request will first be queued to io-worker, then
executed in a nonblock try rather than a synchronous way. Failure of
that leads it to arm poll stuff and then the worker can begin to handle
other works.
The detail process of this kind of requests is:
step1: original context:
queue it to io-worker
step2: io-worker context:
nonblock try(the old logic is a synchronous try here)
|
|--fail--> arm poll
|
|--(fail/ready)-->synchronous issue
|
|--(succeed)-->worker finish it's job, tw
take over the req
This works much better than the old IOSQE_ASYNC logic in cases where
unbound max_worker is relatively small. In this case, number of
io-worker eazily increments to max_worker, new worker cannot be created
and running workers stuck there handling old works in IOSQE_ASYNC mode.
In my 64-core machine, set unbound max_worker to 20, run echo-server,
turns out:
(arguments: register_file, connetion number is 1000, message size is 12
Byte)
original IOSQE_ASYNC: 76664.151 tps
after this patch: 166934.985 tps
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20211018133445.103438-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If writeback I/O to a COW extent fails, the COW fork blocks are
punched out and the data fork blocks left alone. It is possible for
COW fork blocks to overlap non-shared data fork blocks (due to
cowextsz hint prealloc), however, and writeback unconditionally maps
to the COW fork whenever blocks exist at the corresponding offset of
the page undergoing writeback. This means it's quite possible for a
COW fork extent to overlap delalloc data fork blocks, writeback to
convert and map to the COW fork blocks, writeback to fail, and
finally for ioend completion to cancel the COW fork blocks and leave
stale data fork delalloc blocks around in the inode. The blocks are
effectively stale because writeback failure also discards dirty page
state.
If this occurs, it is likely to trigger assert failures, free space
accounting corruption and failures in unrelated file operations. For
example, a subsequent reflink attempt of the affected file to a new
target file will trip over the stale delalloc in the source file and
fail. Several of these issues are occasionally reproduced by
generic/648, but are reproducible on demand with the right sequence
of operations and timely I/O error injection.
To fix this problem, update the ioend failure path to also punch out
underlying data fork delalloc blocks on I/O error. This is analogous
to the writeback submission failure path in xfs_discard_page() where
we might fail to map data fork delalloc blocks and consistent with
the successful COW writeback completion path, which is responsible
for unmapping from the data fork and remapping in COW fork blocks.
Fixes: 787eb48550 ("xfs: fix and streamline error handling in xfs_end_io")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The owner info parameter is always NULL, so get rid of the parameter.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
We only use EFIs to free metadata blocks -- not regular data/attr fork
extents. Remove all the fields that we never use, for a net reduction
of 16 bytes.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
xfs_bmap_add_free isn't a block mapping function; it schedules deferred
freeing operations for a later point in a compound transaction chain.
While it's primarily used by bunmapi, its use has expanded beyond that.
Move it to xfs_alloc.c and rename the function since it's now general
freeing functionality. Bring the slab cache bits in line with the
way we handle the other intent items.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Create slab caches for the high-level structures that coordinate
deferred intent items, since they're used fairly heavily.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Rearrange these structs to reduce the amount of unused padding bytes.
This saves eight bytes for each of the three structs changed here, which
means they're now all (rmap/bmap are 64 bytes, refc is 32 bytes) even
powers of two.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Now that we've gotten rid of the kmem_zone_t typedef, rename the
variables to _cache since that's what they are.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Remove these typedefs by referencing kmem_cache directly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYXLSYQAKCRDh3BK/laaZ
PEfYAQCZcGVboa5uIrCYmVnEgXXf5NX0UrrM0ytvnVssGcgUOQEA8nAx3hwyvwvS
onA14DgXIz3koEE48PWv3gbJdpL/kAM=
=R0ip
-----END PGP SIGNATURE-----
Merge tag 'fuse-fixes-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Syzbot discovered a race in case of reusing the fuse sb (introduced in
this cycle).
Fix it by doing the s_fs_info initialization at the proper place"
* tag 'fuse-fixes-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: clean up error exits in fuse_fill_super()
fuse: always initialize sb->s_fs_info
fuse: clean up fuse_mount destruction
fuse: get rid of fuse_put_super()
fuse: check s_root when destroying sb
Rename didn't decrement/clear nlink on overwritten target inode.
Create a common helper fuse_entry_unlinked() that handles this for unlink,
rmdir and rename.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Logically it belongs there since attributes are invalidated due to the
updated ctime. This is a cleanup and should not change behavior.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Due to the introduction of kmap_local_*, the storage of slots used for
short-term mapping has changed from per-CPU to per-thread. kmap_atomic()
disable preemption, while kmap_local_*() only disable migration.
There is no need to disable preemption in several kamp_atomic places used
in fuse.
Link: https://lwn.net/Articles/836144/
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fuse ->release() is otherwise asynchronous for the reason that it can
happen in contexts unrelated to close/munmap.
Inode is already written back from fuse_flush(). Add it to
fuse_vma_close() as well to make sure inode dirtying from mmaps also get
written out before the file is released.
Also add error handling.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In writeback cache mode mtime/ctime updates are cached, and flushed to the
server using the ->write_inode() callback.
Closing the file will result in a dirty inode being immediately written,
but in other cases the inode can remain dirty after all references are
dropped. This result in the inode being written back from reclaim, which
can deadlock on a regular allocation while the request is being served.
The usual mechanisms (GFP_NOFS/PF_MEMALLOC*) don't work for FUSE, because
serving a request involves unrelated userspace process(es).
Instead do the same as for dirty pages: make sure the inode is written
before the last reference is gone.
- fallocate(2)/copy_file_range(2): these call file_update_time() or
file_modified(), so flush the inode before returning from the call
- unlink(2), link(2) and rename(2): these call fuse_update_ctime(), so
flush the ctime directly from this helper
Reported-by: chenguanyou <chenguanyou@xiaomi.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Get rid of the indirections and just provide a sync_bdevs
helper for the generic sync code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211019062530.2174626-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use sync_blockdev_nowait instead of opencoding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20211019062530.2174626-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use sync_blockdev_nowait instead of opencoding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20211019062530.2174626-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use sync_blockdev instead of opencoding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Acked-by: David Sterba <dsterba@suse.com>
Link: https://lore.kernel.org/r/20211019062530.2174626-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead offer a new sync_blockdev_nowait helper for the !wait case.
This new helper is exported as it will grow modular callers in a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211019062530.2174626-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no clear benefit in having this helper vs just open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20211019062530.2174626-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Call the ->get_unique_id method to query the SCSI identifiers. This can
use the cached VPD page in the sd driver instead of sending a command
on every LAYOUTGET. It will also allow to support NVMe based volumes
if the draft for that ever takes off.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove a redundant call in nfs_updatepage(). nfs_writepage_setup() will
have already called nfs_mark_request_dirty() on success.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Another change to the API io-wq worker limitation API added in 5.15,
apply the limit to all prior users that already registered a tctx. It
may be confusing as it's now, in particular the change covers the
following 2 cases:
TASK1 | TASK2
_________________________________________________
ring = create() |
| limit_iowq_workers()
*not limited* |
TASK1 | TASK2
_________________________________________________
ring = create() |
| issue_requests()
limit_iowq_workers() |
| *not limited*
A note on locking, it's safe to traverse ->tctx_list as we hold
->uring_lock, but do that after dropping sqd->lock to avoid possible
problems. It's also safe to access tctx->io_wq there because tasks
kill it only after removing themselves from tctx_list, see
io_uring_cancel_generic() -> io_uring_clean_tctx()
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d6e09ecc3545e4dc56e43c906ee3d71b7ae21bed.1634818641.git.asml.silence@gmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Syzkaller reports a null pointer dereference in fuse_test_super() that is
caused by sb->s_fs_info being NULL.
This is due to the fact that fuse_fill_super() is initializing s_fs_info,
which is too late, it's already on the fs_supers list. The initialization
needs to be done in sget_fc() with the sb_lock held.
Move allocation of fuse_mount and fuse_conn from fuse_fill_super() into
fuse_get_tree().
After this ->kill_sb() will always be called with non-NULL ->s_fs_info,
hence fuse_mount_destroy() can drop the test for non-NULL "fm".
Reported-by: syzbot+74a15f02ccb51f398601@syzkaller.appspotmail.com
Fixes: 5d5b74aa9c ("fuse: allow sharing existing sb")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
1. call fuse_mount_destroy() for open coded variants
2. before deactivate_locked_super() don't need fuse_mount destruction since
that will now be done (if ->s_fs_info is not cleared)
3. rearrange fuse_mount setup in fuse_get_tree_submount() so that the
regular pattern can be used
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The ->put_super callback is called from generic_shutdown_super() in case of
a fully initialized sb. This is called from kill_***_super(), which is
called from ->kill_sb instances.
Fuse uses ->put_super to destroy the fs specific fuse_mount and drop the
reference to the fuse_conn, while it does the same on each error case
during sb setup.
This patch moves the destruction from fuse_put_super() to
fuse_mount_destroy(), called at the end of all ->kill_sb instances. A
follup patch will clean up the error paths.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Checking "fm" works because currently sb->s_fs_info is cleared on error
paths; however, sb->s_root is what generic_shutdown_super() checks to
determine whether the sb was fully initialized or not.
This change will allow cleanup of sb setup error paths.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There's a mistake in commit 2be7828c9f ("get rid of autofs_getpath()")
that affects kernels from v5.13.0, basically missed because of me not
fully testing the change for Al.
The problem is that the hash calculation for the wait name qstr hasn't
been updated to account for the change to use dentry_path_raw(). This
prevents the correct matching an existing wait resulting in multiple
notifications being sent to the daemon for the same mount which must
not occur.
The problem wasn't discovered earlier because it only occurs when
multiple processes trigger a request for the same mount concurrently
so it only shows up in more aggressive testing.
Fixes: 2be7828c9f ("get rid of autofs_getpath()")
Cc: stable@vger.kernel.org
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the struct_size() helper to do the arithmetic instead of the
argument "size + size * count" in the kzalloc() function.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
In this case these are not actually dynamic sizes: all the operands
involved in the calculation are constant values. However it is better to
refactor them anyway, just to keep the open-coded math idiom out of
code.
So, use the struct_size() helper to do the arithmetic instead of the
argument "size + count * size" in the kzalloc() functions.
This code was detected with the help of Coccinelle and audited and fixed
manually.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Use 2-factor argument multiplication form kvcalloc() instead of
kvzalloc().
Link: https://github.com/KSPP/linux/issues/162
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
All the callers are now in client.c so we can remove the
EXPORT_SYMBOL_GPL() and make it static.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This lets us update the server's attributes when the user does a "mount
-o remount" on the filesystem.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up. There are a few places where we want to probe the server, but
don't actually care about the fsinfo result. Change these to use
nfs_probe_server(), which handles the fattr allocation for us.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
And rename it to nfs_probe_server(). I also change it to take the nfs_fh
as an argument so callers can choose what filehandle to probe.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
And call it before doing an FSINFO probe to reset to the baseline
capabilities before probing.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
dprintk call sites that display no other information than the
function name can be replaced with use of the trace "function" or
"function_graph" plug-ins.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
These new events report slightly different information for readpage
and readpages/readahead.
For readpage:
fsx-1387 [006] 380.761896: nfs_aop_readpage: fileid=00:28:2 fhandle=0x36fbbe51 version=1752899355910932437 offset=131072
fsx-1387 [006] 380.761900: nfs_aop_readpage_done: fileid=00:28:2 fhandle=0x36fbbe51 version=1752899355910932437 offset=131072 ret=0
The index of a synchronous single-page read is reported.
For readpages:
fsx-1387 [006] 380.760847: nfs_aop_readahead: fileid=00:28:2 fhandle=0x36fbbe51 version=1752899355909932456 nr_pages=3
fsx-1387 [006] 380.760853: nfs_aop_readahead_done: fileid=00:28:2 fhandle=0x36fbbe51 version=1752899355909932456 nr_pages=3 ret=0
The count of pages requested is reported. nfs_readpages does not
wait for the READ requests to complete.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
For certain special cases, RPC-related tracepoints record a -1 as
the task ID or the client ID. It's ugly for a trace event to display
4 billion in these cases.
To help keep SUNRPC tracepoints consistent, create a macro that
defines the print format specifiers for tk_pid and cl_clid. At some
point in the future we might try tk_pid with a wider range of values
than 0..64K so this makes it easier to make that change.
RPC tracepoints now look like this:
<...>-1276 [009] 149.720358: rpc_clnt_new: client=00000005 peer=[192.168.2.55]:20049 program=nfs server=klimt.ib
<...>-1342 [004] 149.921234: rpc_xdr_recvfrom: task:0000001a@00000005 head=[0xff1242d9ab6dc01c,144] page=0 tail=[(nil),0] len=144
<...>-1342 [004] 149.921235: xprt_release_cong: task:0000001a@00000005 snd_task:ffffffff cong=256 cwnd=16384
<...>-1342 [004] 149.921235: xprt_put_cong: task:0000001a@00000005 snd_task:ffffffff cong=0 cwnd=16384
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Save some space in the nfs_inode by setting up an anonymous union with
the fields that are peculiar to a specific type of filesystem object.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We mustn't call nfs_wb_all() on anything other than a regular file.
Furthermore, we can exit early when we don't hold a delegation.
Reported-by: David Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If O_DIRECT bumps the commit_info rpcs_out field, then that could lead
to fsync() hangs. The fix is to ensure that O_DIRECT calls
nfs_commit_end().
Fixes: 723c921e7d ("sched/wait, fs/nfs: Convert wait_on_atomic_t() usage to the new wait_var_event() API")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
superblocks issue was particularly annoying because for unexperienced
users it essentially exacted a reboot to establish a new functional
mount in that scenario.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmFwWuYTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHziwdHB/wJEvFkMQrlzbgVmijhmneU+TseAMxR
UBGnsyHdiimIDWqzb81cBuDfrocQzyhntghP2lBzcbzI+gZN1KlrYzKAbYk++cfi
E5Zbw3U8+moa5B2CnO19QEgmJY5DoXYXb6AbO3udIIj1Ls9lx0ByUyDoSn6fZyVH
iUQ9OH7zVTsTscoaBiEVcutmhQjIFjoYJqPpfCg6/15xcXX/L1DvxQFBWOxXqHQw
LYfCQIu8orrA2QdZpuTRpklrMg1Ih+RmqYTdQST6tTtTKJUrHPI0r3A8c2vUoBk1
ph4fBNsAMUqFn1fIGT88PJg81RC5RC3E6D5PqErzRFsPbAv9FHfGYvGQ
=FadF
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.15-rc7' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Two important filesystem fixes, marked for stable.
The blocklisted superblocks issue was particularly annoying because
for unexperienced users it essentially exacted a reboot to establish a
new functional mount in that scenario"
* tag 'ceph-for-5.15-rc7' of git://github.com/ceph/ceph-client:
ceph: fix handling of "meta" errors
ceph: skip existing superblocks that are blocklisted or shut down when mounting
Now that gfs2_file_buffered_write is the only remaining user of
ip->i_gh, we can move the glock holder to the stack (or rather, use the
one we already have on the stack); there is no need for keeping the
holder in the inode anymore.
This is slightly complicated by the fact that we're using ip->i_gh for
the statfs inode in gfs2_file_buffered_write as well. Writing to the
statfs inode isn't very common, so allocate the statfs holder
dynamically when needed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
So far, for buffered writes, we were taking the inode glock in
gfs2_iomap_begin and dropping it in gfs2_iomap_end with the intention of
not holding the inode glock while iomap_write_actor faults in user
pages. It turns out that iomap_write_actor is called inside iomap_begin
... iomap_end, so the user pages were still faulted in while holding the
inode glock and the locking code in iomap_begin / iomap_end was
completely pointless.
Move the locking into gfs2_file_buffered_write instead. We'll take care
of the potential deadlocks due to faulting in user pages while holding a
glock in a subsequent patch.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch introduces a new HIF_MAY_DEMOTE flag and infrastructure that
will allow glocks to be demoted automatically on locking conflicts.
When a locking request comes in that isn't compatible with the locking
state of an active holder and that holder has the HIF_MAY_DEMOTE flag
set, the holder will be demoted before the incoming locking request is
granted.
Note that this mechanism demotes active holders (with the HIF_HOLDER
flag set), while before we were only demoting glocks without any active
holders. This allows processes to keep hold of locks that may form a
cyclic locking dependency; the core glock logic will then break those
dependencies in case a conflicting locking request occurs. We'll use
this to avoid giving up the inode glock proactively before faulting in
pages.
Processes that allow a glock holder to be taken away indicate this by
calling gfs2_holder_allow_demote(), which sets the HIF_MAY_DEMOTE flag.
Later, they call gfs2_holder_disallow_demote() to clear the flag again,
and then they check if their holder is still queued: if it is, they are
still holding the glock; if it isn't, they can re-acquire the glock (or
abort).
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Pass the first current glock holder into function may_grant and
deobfuscate the logic there.
While at it, switch from BUG_ON to GLOCK_BUG_ON in may_grant. To make
that build cleanly, de-constify the may_grant arguments.
We're now using function find_first_holder in do_promote, so move the
function's definition above do_promote.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add a wrapper around iomap_file_buffered_write. We'll add code for when
the operation needs to be retried here later.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Consolidate the various helpers into a single blk_flush_plug helper that
takes a plk_plug and the from_scheduler bool and switch all callsites to
call it directly. Checks that the plug is non-NULL must be performed by
the caller, something that most already do anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211020144119.142582-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_unprep_linked_timeout() is broken, first it needs to return back
REQ_F_ARM_LTIMEOUT, so the linked timeout is enqueued and disarmed. But
now we refcounted it, and linked timeouts may get not executed at all,
leaking a request.
Just kill the unprep optimisation.
Fixes: 906c6caaf5 ("io_uring: optimise io_prep_linked_timeout()")
Reported-by: Beld Zhang <beldzhang@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/51b8e2bfc4bea8ee625cf2ba62b2a350cc9be031.1634719585.git.asml.silence@gmail.com
Link: https://github.com/axboe/liburing/issues/460
Reported-by: Beld Zhang <beldzhang@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, IORING_REGISTER_IOWQ_MAX_WORKERS applies only to the task
that issued it, it's unexpected for users. If one task creates a ring,
limits workers and then passes it to another task the limit won't be
applied to the other task.
Another pitfall is that a task should either create a ring or submit at
least one request for IORING_REGISTER_IOWQ_MAX_WORKERS to work at all,
furher complicating the picture.
Change the API, save the limits and apply to all future users. Note, it
should be done first before giving away the ring or submitting new
requests otherwise the result is not guaranteed.
Fixes: 2e480058dd ("io-wq: provide a way to limit max number of workers")
Link: https://github.com/axboe/liburing/issues/460
Reported-by: Beld Zhang <beldzhang@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/51d0bae97180e08ab722c0d5c93e7439cfb6f697.1634683237.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use ERR_CAST() instead of ERR_PTR(PTR_ERR()).
This makes it more readable and also fix this warning detected by
err_cast.cocci:
./fs/io_uring.c: WARNING: 3208: 11-18: ERR_CAST can be used with buf
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Link: https://lore.kernel.org/r/20211020084948.1038420-1-deng.changcheng@zte.com.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Right now security_dentry_init_security() only supports single security
label and is used by SELinux only. There are two users of this hook,
namely ceph and nfs.
NFS does not care about xattr name. Ceph hardcodes the xattr name to
security.selinux (XATTR_NAME_SELINUX).
I am making changes to fuse/virtiofs to send security label to virtiofsd
and I need to send xattr name as well. I also hardcoded the name of
xattr to security.selinux.
Stephen Smalley suggested that it probably is a good idea to modify
security_dentry_init_security() to also return name of xattr so that
we can avoid this hardcoding in the callers.
This patch adds a new parameter "const char **xattr_name" to
security_dentry_init_security() and LSM puts the name of xattr
too if caller asked for it (xattr_name != NULL).
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
[PM: fixed typos in the commit description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Make sure the security buffer's length/offset are valid with regards to
the packet length.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Steve French <stfrench@microsoft.com>
To avoid dictionary attacks (repeated session setups rapidly sent) to
connect to server, ksmbd make a delay of a 5 seconds on session setup
failure to make it harder to send enough random connection requests
to break into a server if a user insert the wrong password 10 times
in a row.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Validate OutputBufferLength of QUERY_DIR, QUERY_INFO, IOCTL requests and
check the free size of response buffer for these requests.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently force_nonblock stands for three meanings:
- nowait or not
- in an io-worker or not(hold uring_lock or not)
Let's split the logic to two flags, IO_URING_F_NONBLOCK and
IO_URING_F_UNLOCKED for convenience of the next patch.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20211018133431.103298-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
First, fix nr_workers checks against max_workers, with max_worker
registration, it may pretty easily happen that nr_workers > max_workers.
Also, synchronise writing to acct->max_worker with wqe->lock. It's not
an actual problem, but as we don't care about io_wqe_create_worker(),
it's better than WRITE_ONCE()/READ_ONCE().
Fixes: 2e480058dd ("io-wq: provide a way to limit max number of workers")
Reported-by: Beld Zhang <beldzhang@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/11f90e6b49410b7d1a88f5d04fb8d95bb86b8cf3.1634671835.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we have the infrastructure to track the max possible height of
each btree type, we can create a separate slab cache for cursors of each
type of btree. For smaller indices like the free space btrees, this
means that we can pack more cursors into a slab page, improving slab
utilization.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add code for all five btree types so that we can compute the absolute
maximum possible btree height for each btree type. This is a setup for
the next patch, which makes every btree type have its own cursor cache.
The functions are exported so that we can have xfs_db report the
absolute maximum btree heights for each btree type, rather than making
everyone run their own ad-hoc computations.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Nobody uses this symbol anymore, so kill it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Instead of assuming that the hardcoded XFS_BTREE_MAXLEVELS value is big
enough to handle the maximally tall rmap btree when all blocks are in
use and maximally shared, let's compute the maximum height assuming the
rmapbt consumes as many blocks as possible.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
During review of the next patch, Dave remarked that he found these two
btree geometry calculation functions lacking in documentation and that
they performed more work than was really necessary.
These functions take the same parameters and have nearly the same logic;
the only real difference is in the return values. Reword the function
comment to make it clearer what each function does, and move them to be
adjacent to reinforce their relation.
Clean up both of them to stop opencoding the howmany functions, stop
using the uint typedefs, and make them both support computations for
more than 2^32 leaf records, since we're going to need all of the above
for files with large data forks and large rmap btrees.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Compute the actual maximum AG btree height for deciding if a per-AG
block reservation is critically low. This only affects the sanity check
condition, since we /generally/ will trigger on the 10% threshold. This
is a long-winded way of saying that we're removing one more usage of
XFS_BTREE_MAXLEVELS.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Years ago when XFS was thought to be much more simple, we introduced
m_ag_maxlevels to specify the maximum btree height of per-AG btrees for
a given filesystem mount. Then we observed that inode btrees don't
actually have the same height and split that off; and now we have rmap
and refcount btrees with much different geometries and separate
maxlevels variables.
The 'ag' part of the name doesn't make much sense anymore, so rename
this to m_alloc_maxlevels to reinforce that this is the maximum height
of the *free space* btrees. This sets us up for the next patch, which
will add a variable to track the maximum height of all AG btrees.
(Also take the opportunity to improve adjacent comments and fix minor
style problems.)
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
To support future btree code, we need to be able to size btree cursors
dynamically for very large btrees. Switch the maxlevels computation to
use the precomputed values in the superblock, and create cursors that
can handle a certain height. For now, we retain the btree cursor cache
that can handle up to 9-level btrees, though a subsequent patch
introduces separate caches for each btree type, where each cache's
objects will be exactly tall enough to handle the specific btree type.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Encode the maximum btree height in the cursor, since we're soon going to
allow smaller cursors for AG btrees and larger cursors for file btrees.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Refactor btree allocation to a common helper.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reduce the size of the btree cursor structure some more by rearranging
fields to eliminate unused space. While we're at it, fix the ragged
indentation and a spelling error.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Split out the btree level information into a separate struct and put it
at the end of the cursor structure as a VLA. Files with huge data forks
(and in the future, the realtime rmap btree) will require the ability to
support many more levels than a per-AG btree cursor, which means that
we're going to create per-btree type cursor caches to conserve memory
for the more common case.
Note that a subsequent patch actually introduces dynamic cursor heights.
This one merely rearranges the structure to prepare for that.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reorganize struct xchk_btree so that we can dynamically size the context
structure to fit the type of btree cursor that we have. This will
enable us to use memory more efficiently once we start adding very tall
btree types. Right-size the lastkey array to match the number of *node*
levels in the tree so that we stop wasting space.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The btree scrubbing code checks that the records (or keys) that it finds
in a btree block are all in order by calling the btree cursor's
->recs_inorder function. This of course makes no sense for the first
item in the block, so we switch that off with a separate variable in
struct xchk_btree.
Christoph helped me figure out that the variable is unnecessary, since
we just accessed bc_ptrs[level] and can compare that against zero. Use
that, and save ourselves some memory space.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
We're never going to run more than 4 billion btree operations on a
refcount cursor, so shrink the field to an unsigned int to reduce the
structure size. Fix whitespace alignment too.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
During review of subsequent patches, Dave and I noticed that this
function doesn't work quite right -- accessing cur->bc_ino depends on
the ROOT_IN_INODE flag, not LONG_PTRS. Fix that and the parentheses
isssue. While we're at it, remove the piece that accesses cur->bc_ag,
because block 0 of an AG is never part of a btree.
Note: This changes the btree scrubber tracepoints behavior -- if the
cursor has no buffer for a certain level, it will always report
NULLFSBLOCK. It is assumed that anyone tracing the online fsck code
will also be tracing xchk_start/xchk_done or otherwise be aware of what
exactly is being scrubbed.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The for_each_perag*() set of macros are hacky in that some (i.e.
those based on sb_agcount) rely on the assumption that perag
iteration terminates naturally with a NULL perag at the specified
end_agno. Others allow for the final AG to have a valid perag and
require the calling function to clean up any potential leftover
xfs_perag reference on termination of the loop.
Aside from providing a subtly inconsistent interface, the former
variant is racy with growfs because growfs can create discoverable
post-eofs perags before the final superblock update that completes
the grow operation and increases sb_agcount. This leads to the
following assert failure (reproduced by xfs/104) in the perag free
path during unmount:
XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0, file: fs/xfs/libxfs/xfs_ag.c, line: 195
This occurs because one of the many for_each_perag() loops in the
code that is expected to terminate with a NULL pag (and thus has no
post-loop xfs_perag_put() check) raced with a growfs and found a
non-NULL post-EOFS perag, but terminated naturally based on the
end_agno check without releasing the post-EOFS perag.
Rework the iteration logic to lift the agno check from the main for
loop conditional to the iteration helper function. The for loop now
purely terminates on a NULL pag and xfs_perag_next() avoids taking a
reference to any perag beyond end_agno in the first place.
Fixes: f250eedcf7 ("xfs: make for_each_perag... a first class citizen")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The for_each_perag_from() iteration macro relies on sb_agcount to
process every perag currently within EOFS from a given starting
point. It's perfectly valid to have perag structures beyond
sb_agcount, however, such as if a growfs is in progress. If a perag
loop happens to race with growfs in this manner, it will actually
attempt to process the post-EOFS perag where ->pag_agno ==
sb_agcount. This is reproduced by xfs/104 and manifests as the
following assert failure in superblock write verifier context:
XFS: Assertion failed: agno < mp->m_sb.sb_agcount, file: fs/xfs/libxfs/xfs_types.c, line: 22
Update the corresponding macro to only process perags that are
within the current sb_agcount.
Fixes: 58d43a7e32 ("xfs: pass perags around in fsmap data dev functions")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Rename the next_agno variable to be consistent across the several
iteration macros and shorten line length.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Fold the loop iteration logic into a helper in preparation for
further fixups. No functional change in this patch.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
coccicheck complains about the use of snprintf() in sysfs show functions.
Fix the coccicheck warning:
WARNING: use scnprintf or sprintf.
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
This is only of historical interest, and anyone interested in the
history can dig out an old version of locks.c from from git.
Triggered by the observation that it references the now-removed
Documentation/filesystems/mandatory-locking.rst.
Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
When enabling -Wunused warnings by building with W=1, I get an
instance of the -Wunused-but-set-parameter warning in the io_uring code:
fs/io_uring.c: In function 'io_queue_async_work':
fs/io_uring.c:1445:61: error: parameter 'locked' set but not used [-Werror=unused-but-set-parameter]
1445 | static void io_queue_async_work(struct io_kiocb *req, bool *locked)
| ~~~~~~^~~~~~
There are very few warnings of this type, so it would be nice to enable
this by default and fix all the existing instances. As the assignment
serves no purpose by itself other than to prevent developers from using
the variable, an easy workaround is to remove the assignment and just
rename the argument to "dont_use".
Fixes: f237c30a56 ("io_uring: batch task work locking")
Link: https://lore.kernel.org/lkml/20210920121352.93063-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211019153507.348480-1-arnd@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add MicroLZMA support in order to maximize compression ratios for
specific scenarios. For example, it's useful for low-end embedded
boards and as a secondary algorithm in a file for specific access
patterns.
MicroLZMA is a new container format for raw LZMA1, which was created
by Lasse Collin aiming to minimize old LZMA headers and get rid of
unnecessary EOPM (end of payload marker) as well as to enable
fixed-sized output compression, especially for 4KiB pclusters.
Similar to LZ4, inplace I/O approach is used to minimize runtime
memory footprint when dealing with I/O. Overlapped decompression is
handled with 1) bounced buffer for data under processing or 2) extra
short-lived pages from the on-stack pagepool which will be shared in
the same read request (128KiB for example).
Link: https://lore.kernel.org/r/20211010213145.17462-8-xiang@kernel.org
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Previously, some LZ4 methods were named with `generic'. However, while
evaluating the effective LZMA approach, it seems they aren't quite
generic at all (e.g. no need preparing dstpages for most LZMA cases.)
Avoid such naming instead.
Link: https://lore.kernel.org/r/20211010213145.17462-7-xiang@kernel.org
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Previously, the readahead window was strictly followed by EROFS
decompression strategy in order to minimize extra memory footprint.
However, it could become inefficient if just reading the partial
requested data for much big LZ4 pclusters and the upcoming LZMA
implementation.
Let's try to request the leading data in a pcluster without
triggering memory reclaiming instead for the LZ4 approach first
to boost up 100% randread of large big pclusters, and it has no real
impact on low memory scenarios.
It also introduces a way to expand read lengths in order to decompress
the whole pcluster, which is useful for LZMA since the algorithm
itself is relatively slow and causes CPU bound, but LZ4 is not.
Link: https://lore.kernel.org/r/20211008200839.24541-4-xiang@kernel.org
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Previously, for each HEAD lcluster, it can be either HEAD or PLAIN
lcluster to indicate whether the whole pcluster is compressed or not.
In this patch, a new HEAD2 head type is introduced to specify another
compression algorithm other than the primary algorithm for each
compressed file, which can be used for upcoming LZMA compression and
LZ4 range dictionary compression for various data patterns.
It has been stayed in the EROFS roadmap for years. Complete it now!
Link: https://lore.kernel.org/r/20211017165721.2442-1-xiang@kernel.org
Reviewed-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
./fs/nfsd/nfssvc.c: 1072: 8-9: :WARNING return of 0/1 in function
'nfssvc_decode_voidarg' with return type bool
Return statements in functions returning bool should use true/false
instead of 1/0.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The block layer can use this knowledge to make smarter decisions on
how to handle the request, if it knows that N more may be coming. Switch
to using blk_start_plug_nr_ios() to pass in that information.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge REQ_F_NOWAIT_READ and REQ_F_NOWAIT_WRITE into one flag, i.e.
REQ_F_SUPPORT_NOWAIT. First it gets rid of dependence on CONFIG_64BIT
but also simplifies the code.
One thing to consider is when we don't have ->{read,write}_iter and go
through loop_rw_iter(). Just fail it with -EAGAIN if we expect nowait
behaviour but not sure whether it supports it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f832a20e5186c2e79c6519280c238f559a1d2bbc.1634425438.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't check if we can do nowait before arming apoll, there are several
reasons for that. First, we don't care much about files that don't
support nowait. Second, it may be useful -- we don't want to be taking
away extra workers from io-wq when it can go in some async. Even if it
will go through io-wq eventually, it make difference in the numbers of
workers actually used. And the last one, it's needed to clean nowait in
future commits.
[kernel test robot: fix unused-var]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9d06f3cb2c8b686d970269a87986f154edb83043.1634425438.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This commit reorders the conditions in a branch in io_write. The
reorder to check 'ret2 == -EAGAIN' first as checking
'(req->ctx->flags & IORING_SETUP_IOPOLL)' will likely be more
expensive due to 2x memory derefences.
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Link: https://lore.kernel.org/r/20211017013229.4124279-1-goldstein.w.n@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We pass iovec** into __io_import_iovec(), which should keep it,
initialise and modify accordingly. It's expensive, return it directly
from __io_import_iovec encoding errors with ERR_PTR if needed.
io_import_iovec keeps the old interface, but it's inline and so
everything is optimised nicely.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6230e9769982f03a8f86fa58df24666088c44d3e.1634314022.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Combine force_nonblock branches (which is already optimised by
compiler), flip branches so the most hot/common path is the first, e.g.
as with non on-stack iov setup, and add extra likely/unlikely
attributions for errror paths.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2c2536c5896d70994de76e387ea09a0402173a3f.1634144845.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make io_import_iovec taking struct io_rw_state instead of an iter
pointer. First it takes care of initialising iovec pointer, which can be
forgotten. Even more, we can not init it if not needed, e.g. in case of
IORING_OP_READ_FIXED or IORING_OP_READ. Also hide saving iter_state
inside of it by splitting out an inline function of it to avoid extra
ifs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b1bbc213a95e5272d4da5867bb977d9acb6f2109.1634144845.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
First, change IO_URING_F_NONBLOCK to take sign bit of the int, so
checking for it can be turned into test + sign-based-jump, makes the
binary smaller and may be faster.
Then, instead of passing need_lock boolean into io_import_iovec() just
give it issue_flags, which is already stored somewhere. Saves some space
on stack, a couple of test + cmov operations and other conversions.
note: we still leave
force_nonblock = issue_flags & IO_URING_F_NONBLOCK
variable, but it's optimised out by the compiler into testing
issue_flags directly.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ee96547e692f6c975c229cd82fc721679571a734.1634144845.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently io_read() and io_write() keep separate pointers to an iter and
to struct iov_iter_state, which is not great for register spilling and
requires more on-stack copies. They are both either on-stack or in
req->async_data at the same time, so use struct io_rw_state and keep a
pointer only to it, so having all the state with just one pointer.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/5c5e7ffd7dc25fc35075c70411ba99df72f237fa.1634144845.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't override req->result in io_complete_rw_iopoll() when it's already
of the same value, we have an if just above it, so move the assignment
there. Also, add one simle unlikely() in __io_complete_rw_common().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8dfeb4f84026a20172bcf82c05010abe955874ae.1634144845.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Apparently, percpu_ref_put/get() are expensive enough if done per
request, get them in a batch and cache on the submission side to avoid
getting it over and over again. Also, if we're completing under
uring_lock, return refs back into the cache instead of
perfcpu_ref_put(). Pretty similar to how we do tctx->cached_refs
accounting, but fall back to normal putting when we already changed a
rsrc node by the time of free.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b40d8c5bc77d3c9550df8a319117a374ac85f8f4.1633817310.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Looking at the assembly, the compiler decided to reload req->opcode in
io_op_defs[opcode].needs_file instead of one it had in a register, so
store it in a temp variable so it can be optimised out. Also move the
personality block later, it's better for spilling/etc. as it only
depends on @sqe, which we're keeping anyway.
By the way, zero req->opcode if it over IORING_OP_LAST, not a problem,
at the moment but is safer.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6ba869f5f8b7b0f991c87fdf089f0abf87cbe06b.1633532552.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Plugging is only needed with requests that also need a file, so hide
plugging under a ->needs_file check. Also, place ->needs_file and ->plug
bits into the same byte of io_op_defs, it may matter for compilers, e.g.
only with the change a tested one decided to optimise two memory testb
into a more with two register testb.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1600d1287bb7d16451d4ef3343252787a5314927.1633532552.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
->async_data is a slow path, so it won't matter much if we do the clean
up inside io_clean_op(). Moreover, in many cases it's allocated together
with setting one or more of IO_REQ_CLEAN_FLAGS flags, so it'd go through
io_clean_op() anyway.
Control ->async_data allocation with a new flag REQ_F_ASYNC_DATA, so we
can do all the maintainence under io_req_needs_clean() fast check.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6892cf5883c459f36bda26f30ceb16742b20b84b.1633373302.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Delay reading the next node in io_free_batch_list(), allows the compiler
to load the value a bit later improving register spilling in some cases.
With gcc 11.1 it helped to move @task_refs variable from the stack to a
register and optimises out a couple of per request instructions.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/cc9fdfb6f72a4e8bc9918a5e9f2d97869a263ae4.1633373302.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Attribute cold functions so compilers can optimise them for size. It
shrinks the binary by 2.5-3%
text data bss dec hex filename
90670 14002 8 104680 198e8 ./fs/io_uring.o
88053 14002 8 102063 18eaf ./fs/io_uring.o
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b53d385f91dca45170b67d7f11c7abd787e821f6.1633373302.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currenlty, we allocate one ctx reference per request at submission time
and put them at free. It's batched and not so expensive but it still
bloats the kernel, adds 2 function calls for rcu and adds some overhead
for request counting in io_free_batch_list().
Always keep one reference with a request, even when it's freed and in
io_uring request caches. There is extra work at ring exit / quiesce
paths, which now need to put all cached requests. io_ring_exit_work() is
already looping, so it's not a problem. Add hybrid-busy waiting to
io_ctx_quiesce() as well for now.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/99613fbe396e80777228cde39bbda1aa8938554e.1633373302.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The invariant of io_wq_work_list is that it's empty IFF ->first is NULL,
so no need to initially set ->last. With now having more users of the
list it may play a role, i.e. used in each tw iteration and on every
completion flushing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c464ab5cab6e46a858c6d39c107e92b3b5291f13.1633373302.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Even after fully inlining io_alloc_req() my compiler does a NULL check
in the path of successful allocation, no hacks like an empty dereference
help it. Restructure io_alloc_req() by splitting out refilling part, so
the compiler generate a slightly better binary.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/eda17571bdc7248d8e617b23e7132a5416e4680b.1633373302.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_req_complete_state() is inlined and used in lots of places, so we
want to keep it concise. Move adding a request into a completion batch
list from io_req_complete_state() into the consumer, i.e.
__io_queue_sqe().
before vs after
text data bss dec hex filename
91894 14002 8 105904 19db0 ./fs/io_uring.o
91046 14002 8 105056 19a60 ./fs/io_uring.o
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4afca4e11abfd4cc8e99777fdcaf4d34cf4d022d.1633373302.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We want ->comp_list in the second cacheline, which is hotter comparing
to the 3rd. Swap the field with ->link, which is not as hot and
controlled by flags and so not accessed unless there is a link.
By the way add a couple of comments for io_kiocb fields.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9d9dde31f8f62279a5f48c575bbc27b8290edc0c.1633373302.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For some reason non-off IORING_OP_TIMEOUT always fails links, it's
pretty inconvenient and unnecessary limits chaining after it to hard
linking, which is far from ideal, e.g. doesn't pair well with timeout
cancellation. Add a flag forcing it to not fail links on -ETIME.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/17c7ec0fb7a6113cc6be8cdaedcada0ba836ac0e.1633199723.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Put an explicit check for number of requests to submit. First,
we can turn while into do-while and it generates better code, and second
that if can be cheaper, e.g. by using CPU flags after sub in
io_sqring_entries().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/5926baadd20c28feab7a5e1725fedf32e4553ff7.1632516769.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a request completed inline the result should only be zero, it's a
grave error otherwise. So, when we see REQ_F_COMPLETE_INLINE it's not
even necessary to check the return code, and the flag check can be moved
earlier.
It's one "if" less for inline completions, and same two checks for it
normally completing (ret == 0). Those are two cases we care about the
most.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ebd4e397a9c26d96c99b24447acc309741041a83.1632516769.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extract slow paths from __io_queue_sqe() into a function and inline the
hot path. With that we have everything completely inlined on the
submission path up until io_issue_sqe().
-> io_submit_sqes()
-> io_submit_sqe() (inlined)
-> io_queue_sqe() (inlined)
-> __io_queue_sqe() (inlined)
-> io_issue_sqe()
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f1606864d95d7f26dc28c7eec3dc6ed6ec32618a.1632516769.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't want the slow path of io_queue_sqe to be inlined, so extract a
function from it.
text data bss dec hex filename
91950 13986 8 105944 19dd8 ./fs/io_uring.o
91758 13986 8 105752 19d18 ./fs/io_uring.o
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/fb01253911f8fb374268f65b1ba939b54ca6583f.1632516769.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->ctx->active_drain is a bit too expensive, partially because of two
dereferences. Do a trick, if we see it set in io_init_req(), set
REQ_F_FORCE_ASYNC and it automatically goes through a slower path where
we can catch it. It's nearly free to do in io_init_req() because there
is already ->restricted check and it's in the same byte of a bitmask.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d7e7ddc63c15e8a300833132abb3eb8fd3918aef.1632516769.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are two call sites of io_queue_sqe() in io_submit_sqe(), combine
them into one, because io_queue_sqe() is inline and we don't want to
bloat binary, and will become even bigger
text data bss dec hex filename
92126 13986 8 106120 19e88 ./fs/io_uring.o
91966 13986 8 105960 19de8 ./fs/io_uring.o
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/506124b8e767f0a4576f7a459f6aea3d13fb4dda.1632516769.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
First, convert rest of iopoll bits to single linked lists, and also
replace per-request list_add_tail() with splicing a part of slist.
With that, use io_free_batch_list() to put/free requests. The main
advantage of it is that it's now the only user of struct req_batch and
friends, and so they can be inlined. The main overhead there was
per-request call to not-inlined io_req_free_batch(), which is expensive
enough.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b37fc6d5954b241e025eead7ab92c6f44a42f229.1632516769.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert explicit barrier around iopoll_completed to smp_load_acquire()
and smp_store_release(). Similar on the callback side, but replaces a
single smp_rmb() with per-request smp_load_acquire(), neither imply any
extra CPU ordering for x86. Use READ_ONCE as usual where it doesn't
matter.
Use it to move filling CQEs by iopoll earlier, that will be necessary
to avoid traversing the list one extra time in the future.
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8bd663cb15efdc72d6247c38ee810964e744a450.1632516769.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The main loop of io_do_iopoll() iterates and does ->iopoll() until it
meets a first completed request, then it continues from that position
and splices requests to pass them through io_iopoll_complete().
Split the loop in two for clearness, iopolling and reaping completed
requests from the list.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a7f6fd27a94845e5dc925a47a4a9765a92e514fb.1632516769.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Apart from just using lists (i.e. io_wq_work_list), we also want to have
stacks, which are a bit faster, and have some interoperability between
them. Add a stack implementation based on io_wq_work_node and some
helpers.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/5d3a412a5ac0d47e0f0499d70d2207d70a68925e.1632516769.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently we collect requests for completion batching in an array.
Replace them with a singly linked list. It's as fast as arrays but
doesn't take some much space in ctx, and will be used in future patches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a666826f2854d17e9fb9417fb302edfeb750f425.1632516769.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't really need to pass the number of requests to complete into
io_do_iopoll(), a flag whether to enforce non-spin mode is enough.
Should be straightforward, maybe except io_iopoll_check(). We pass !min
there, because we do never enter with the number of already reaped
requests is larger than the specified @min, apart from the first
iteration, where nr_events is 0 and so the final check should be
identical.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/782b39d1d8ec584eae15bca0a1feb6f0571fe5b8.1632516769.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hint the compiler that it's not as likely to have creds different from
current attached to a request. The current code generation is far from
ideal, hopefully it can help to some compilers to remove duplicated jump
tables and so.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e7815251ac4bf5a4a23d298c752f029ae19f3837.1632516769.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IOSQE_IO_DRAIN is quite marginal and we don't care too much about
IOSQE_BUFFER_SELECT. Save to ifs and hide both of them under
SQE_VALID_FLAGS check. Now we first check whether it uses a "safe"
subset, i.e. without DRAIN and BUFFER_SELECT, and only if it's not
true we test the rest of the flags.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/dccfb9ab2ab0969a2d8dc59af88fa0ce44eeb1d5.1631703764.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now completions are done from task context, that means that it's either
the task itself, task_work or io-wq worker. In all those cases the ctx
will be staying alive by mutexing, explicit referencing or req references
by iowq. Remove extra ctx pinning from io_req_complete_post().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/60a0e96434c16ab4fe587651448290d61ec9a113.1631703756.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Developers may need some uring info to help themselves debug and address
issues in production. This includes sqring/cqring head/tail and the
detailed sqe/cqe info, which is very useful when an application is hung
on a ring.
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210913130854.38542-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't do io_submit_flush_completions() when there is no requests
enqueued, and every single caller checks for it. Hide that check into
the function not forgetting about inlining. That will make it much
easier for changing the empty check condition in the future.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d7ff8cef5da1b38e8ea648f5aad9a315ddfc7b57.1631115443.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
->ios_left is only used to decide whether to plug or not, kill it to
avoid this extra accounting, just use the initial submission number.
There is no much difference in regards of enabling plugging, where this
one does it in a few more cases, but all major ones should be covered
well.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f13993bcf5b477f9a7d52881fc49f9457ea9870a.1631115443.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While task_work_add() in io_workqueue_create() is true,
then duplicate code is executed:
-> clear_bit_unlock(0, &worker->create_state);
-> io_worker_release(worker);
-> atomic_dec(&acct->nr_running);
-> io_worker_ref_put(wq);
-> return false;
-> clear_bit_unlock(0, &worker->create_state); // back to io_workqueue_create()
-> io_worker_release(worker);
-> kfree(worker);
The io_worker_release() and clear_bit_unlock() are executed twice.
Fixes: 3146cba99a ("io-wq: make worker creation resilient against signals")
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Link: https://lore.kernel.org/r/20210911085847.34849-1-cuibixuan@huawei.com
Reviwed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
I recently had to look at a production problem where a request ended
up getting the dreaded -EINVAL error on submit. The most used and
hence useless of error codes, as it just tells you that something
was wrong with your request, but not more than that.
Let's dump the full sqe contents if we run into an issue failure,
that'll allow easier diagnosing of a wide variety of issues.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, we check the wb_err too early for directories, before all of
the unsafe child requests have been waited on. In order to fix that we
need to check the mapping->wb_err later nearer to the end of ceph_fsync.
We also have an overly-complex method for tracking errors after
blocklisting. The errors recorded in cleanup_session_requests go to a
completely separate field in the inode, but we end up reporting them the
same way we would for any other error (in fsync).
There's no real benefit to tracking these errors in two different
places, since the only reporting mechanism for them is in fsync, and
we'd need to advance them both every time.
Given that, we can just remove i_meta_err, and convert the places that
used it to instead just use mapping->wb_err instead. That also fixes
the original problem by ensuring that we do a check_and_advance of the
wb_err at the end of the fsync op.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/52864
Reported-by: Patrick Donnelly <pdonnell@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently when mounting, we may end up finding an existing superblock
that corresponds to a blocklisted MDS client. This means that the new
mount ends up being unusable.
If we've found an existing superblock with a client that is already
blocklisted, and the client is not configured to recover on its own,
fail the match. Ditto if the superblock has been forcibly unmounted.
While we're in here, also rename "other" to the more conventional "fsc".
Cc: stable@vger.kernel.org
URL: https://bugzilla.redhat.com/show_bug.cgi?id=1901499
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If we open a file without read access and then pass the fd to a syscall
whose implementation calls kernel_read_file_from_fd(), we get a warning
from __kernel_read():
if (WARN_ON_ONCE(!(file->f_mode & FMODE_READ)))
This currently affects both finit_module() and kexec_file_load(), but it
could affect other syscalls in the future.
Link: https://lkml.kernel.org/r/20211007220110.600005-1-willy@infradead.org
Fixes: b844f0ecbc ("vfs: define kernel_copy_file_from_fd()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Hao Sun <sunhao.th@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Starting with kernel 5.11 built with CONFIG_FORTIFY_SOURCE mouting an
ocfs2 filesystem with either o2cb or pcmk cluster stack fails with the
trace below. Problem seems to be that strings for cluster stack and
cluster name are not guaranteed to be null terminated in the disk
representation, while strlcpy assumes that the source string is always
null terminated. This causes a read outside of the source string
triggering the buffer overflow detection.
detected buffer overflow in strlen
------------[ cut here ]------------
kernel BUG at lib/string.c:1149!
invalid opcode: 0000 [#1] SMP PTI
CPU: 1 PID: 910 Comm: mount.ocfs2 Not tainted 5.14.0-1-amd64 #1
Debian 5.14.6-2
RIP: 0010:fortify_panic+0xf/0x11
...
Call Trace:
ocfs2_initialize_super.isra.0.cold+0xc/0x18 [ocfs2]
ocfs2_fill_super+0x359/0x19b0 [ocfs2]
mount_bdev+0x185/0x1b0
legacy_get_tree+0x27/0x40
vfs_get_tree+0x25/0xb0
path_mount+0x454/0xa20
__x64_sys_mount+0x103/0x140
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Link: https://lkml.kernel.org/r/20210929180654.32460-1-vvidic@valentin-vidic.from.hr
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 6dbf7bb555 ("fs: Don't invalidate page buffers in
block_write_full_page()") uncovered a latent bug in ocfs2 conversion
from inline inode format to a normal inode format.
The code in ocfs2_convert_inline_data_to_extents() attempts to zero out
the whole cluster allocated for file data by grabbing, zeroing, and
dirtying all pages covering this cluster. However these pages are
beyond i_size, thus writeback code generally ignores these dirty pages
and no blocks were ever actually zeroed on the disk.
This oversight was fixed by commit 693c241a5f ("ocfs2: No need to zero
pages past i_size.") for standard ocfs2 write path, inline conversion
path was apparently forgotten; the commit log also has a reasoning why
the zeroing actually is not needed.
After commit 6dbf7bb555, things became worse as writeback code stopped
invalidating buffers on pages beyond i_size and thus these pages end up
with clean PageDirty bit but with buffers attached to these pages being
still dirty. So when a file is converted from inline format, then
writeback triggers, and then the file is grown so that these pages
become valid, the invalid dirtiness state is preserved,
mark_buffer_dirty() does nothing on these pages (buffers are already
dirty) but page is never written back because it is clean. So data
written to these pages is lost once pages are reclaimed.
Simple reproducer for the problem is:
xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \
-c "pwrite 4000 2000" ocfs2_file
After unmounting and mounting the fs again, you can observe that end of
'ocfs2_file' has lost its contents.
Fix the problem by not doing the pointless zeroing during conversion
from inline format similarly as in the standard write path.
[akpm@linux-foundation.org: fix whitespace, per Joseph]
Link: https://lkml.kernel.org/r/20210930095405.21433-1-jack@suse.cz
Fixes: 6dbf7bb555 ("fs: Don't invalidate page buffers in block_write_full_page()")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: "Markov, Andrey" <Markov.Andrey@Dell.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A race is possible when a process exits, its VMAs are removed by
exit_mmap() and at the same time userfaultfd_writeprotect() is called.
The race was detected by KASAN on a development kernel, but it appears
to be possible on vanilla kernels as well.
Use mmget_not_zero() to prevent the race as done in other userfaultfd
operations.
Link: https://lkml.kernel.org/r/20210921200247.25749-1-namit@vmware.com
Fixes: 63b2d4174c ("userfaultfd: wp: add the writeprotect API to userfaultfd ioctl")
Signed-off-by: Nadav Amit <namit@vmware.com>
Tested-by: Li Wang <liwang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the sb_bdev_nr_blocks helper instead of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211018101130.1838532-31-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the sb_bdev_nr_blocks helper instead of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211018101130.1838532-30-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the sb_bdev_nr_blocks helper instead of open coding it and clean up
ntfs_fill_super a bit by moving an assignment a little earlier that has
no negative side effects.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Link: https://lore.kernel.org/r/20211018101130.1838532-29-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the sb_bdev_nr_blocks helper instead of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Link: https://lore.kernel.org/r/20211018101130.1838532-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the sb_bdev_nr_blocks helper instead of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20211018101130.1838532-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the proper helper to read the block device size and remove two
cargo culted checks that can't be false.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20211018101130.1838532-23-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the proper helper to read the block device size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211018101130.1838532-22-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the proper helper to read the block device size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211018101130.1838532-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the proper helper to read the block device size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Link: https://lore.kernel.org/r/20211018101130.1838532-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the proper helper to read the block device size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211018101130.1838532-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the proper helper to read the block device size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211018101130.1838532-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the proper helper to read the block device size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211018101130.1838532-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the proper helper to read the block device size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211018101130.1838532-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need to convert from bdev to inode and back.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211018101130.1838532-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the proper helper to read the block device size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20211018101130.1838532-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Wire up using an io_comp_batch for f_op->iopoll(). If the lower stack
supports it, we can handle high rates of polled IO more efficiently.
This raises the single core efficiency on my system from ~6.1M IOPS to
~6.6M IOPS running a random read workload at depth 128 on two gen2
Optane drives.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
struct io_comp_batch contains a list head and a completion handler, which
will allow completions to more effciently completed batches of IO.
For now, no functional changes in this patch, we just define the
io_comp_batch structure and add the argument to the file_operations iopoll
handler.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Use memset_startat() so memset() doesn't get confused about writing
beyond the destination member that is intended to be the starting point
of zeroing through the end of the struct.
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: linux-btrfs@vger.kernel.org
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Turn iov_iter_fault_in_readable into a function that returns the number
of bytes not faulted in, similar to copy_to_user, instead of returning a
non-zero value when any of the requested pages couldn't be faulted in.
This supports the existing users that require all pages to be faulted in
as well as new users that are happy if any pages can be faulted in.
Rename iov_iter_fault_in_readable to fault_in_iov_iter_readable to make
sure this change doesn't silently break things.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Turn fault_in_pages_{readable,writeable} into versions that return the
number of bytes not faulted in, similar to copy_to_user, instead of
returning a non-zero value when any of the requested pages couldn't be
faulted in. This supports the existing users that require all pages to
be faulted in as well as new users that are happy if any pages can be
faulted in.
Rename the functions to fault_in_{readable,writeable} to make sure
this change doesn't silently break things.
Neither of these functions is entirely trivial and it doesn't seem
useful to inline them, so move them to mm/gup.c.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Replace the blk_poll interface that requires the caller to keep a queue
and cookie from the submissions with polling based on the bio.
Polling for the bio itself leads to a few advantages:
- the cookie construction can made entirely private in blk-mq.c
- the caller does not need to remember the request_queue and cookie
separately and thus sidesteps their lifetime issues
- keeping the device and the cookie inside the bio allows to trivially
support polling BIOs remapping by stacking drivers
- a lot of code to propagate the cookie back up the submission path can
be removed entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no point in sleeping for the expected I/O completion timeout
in the io_uring async polling model as we never poll for a specific
I/O.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch the boolean spin argument to blk_poll to passing a set of flags
instead. This will allow to control polling behavior in a more fine
grained way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-10-hch@lst.de
[axboe: adapt to changed io_uring iopoll]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syscall-level code can't just poke into the details of the poll cookie,
which is private information of the block layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211012111226.760968-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If an iocb is split into multiple bios we can't poll for both. So don't
bother to even try to poll in that case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The polling support in the legacy direct-io support is a little crufty.
It already doesn't support the asynchronous polling needed for io_uring
polling, and is hard to adopt to upcoming changes in the polling
interfaces. Given that all the major file systems already use the iomap
direct I/O code, just drop the polling support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move inode_to_bdi out of line to avoid having to include blkdev.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no need to pull blk-cgroup.h and thus blkdev.h in here, so
break the include chain.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk-cgroup.h pulls in blkdev.h and thus pretty much all the block
headers. Break this dependency chain by turning wbc_blkcg_css into a
macro and dropping the blk-cgroup.h include.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reimplement redirty_page_for_writepage() as a wrapper around
folio_redirty_for_writepage(). Account the number of pages in the
folio, add kernel-doc and move the prototype to writeback.h.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
-----BEGIN PGP SIGNATURE-----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=4wXI
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.15-2021-10-17' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Just a single fix for a wrong condition for grabbing a lock, a
regression in this merge window"
* tag 'io_uring-5.15-2021-10-17' of git://git.kernel.dk/linux-block:
io_uring: fix wrong condition to grab uring lock
Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYWvzFg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymfLQCfSCP698AAvoCgG0fOfLakFkw80h0AoKIVm3lk
t0GUdnplU18CjnO5M1Zj
=+dh9
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.15-rc6, all of which have
been in linux-next for a while with no reported issues.
They include:
- kernfs negative dentry bugfix
- simple pm bus fixes to resolve reported issues"
* tag 'driver-core-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: bus: Delete CONFIG_SIMPLE_PM_BUS
drivers: bus: simple-pm-bus: Add support for probing simple bus only devices
driver core: Reject pointless SYNC_STATE_ONLY device links
kernfs: don't create a negative dentry if inactive node exists
Currently, z_erofs_map_blocks_iter() returns whether extents are
compressed or not, and the decompression frontend gets the specific
algorithms then.
It works but not quite well in many aspests, for example:
- The decompression frontend has to deal with whether extents are
compressed or not again and lookup the algorithms if compressed.
It's duplicated and too detailed about the on-disk mapping.
- A new secondary compression head will be introduced later so that
each file can have 2 compression algorithms at most for different
type of data. It could increase the complexity of the decompression
frontend if still handled in this way;
- A new readmore decompression strategy will be introduced to get
better performance for much bigger pcluster and lzma, which needs
the specific algorithm in advance as well.
Let's look up compression algorithms in z_erofs_map_blocks_iter()
directly instead.
Link: https://lore.kernel.org/r/20211008200839.24541-2-xiang@kernel.org
Reviewed-by: Chao Yu <chao@kernel.org>
Reviewed-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
In order to support multi-layer container images, add multiple
device feature to EROFS. Two ways are available to use for now:
- Devices can be mapped into 32-bit global block address space;
- Device ID can be specified with the chunk indexes format.
Note that it assumes no extent would cross device boundary and mkfs
should take care of it seriously.
In the future, a dedicated device manager could be introduced then
thus extra devices can be automatically scanned by UUID as well.
Link: https://lore.kernel.org/r/20211014081010.43485-1-hsiangkao@linux.alibaba.com
Reviewed-by: Chao Yu <chao@kernel.org>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Previously, EROFS mount options are all in the basic types, so
erofs_fs_context can be directly copied with assignment. However,
when the multiple device feature is introduced, it's hard to handle
multiple device information like the other basic mount options.
Let's separate basic mount option usage from fs_context, thus
multiple device information can be handled gracefully then.
No logic changes.
Link: https://lore.kernel.org/r/20211007070224.12833-1-hsiangkao@linux.alibaba.com
Reviewed-by: Chao Yu <chao@kernel.org>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
I don't know if that Solaris behavior matters any more or if it's still
possible to look up that bug ID any more. The XFS behavior's definitely
still relevant, though; any but the most recent XFS filesystems will
lose the top bits.
Reported-by: Frank S. Filz <ffilzlnx@mindspring.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
smb2_validate_credit_charge() accesses fields in the SMB2 PDU body,
but until smb2_calc_size() is called the PDU has not yet been verified
to be large enough to access the PDU dynamic part length field.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add buffer validation for smb direct.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd limit read/write/trans buffer size not to exceed maximum 8MB.
And set the minimum value of max response buffer size to 64KB.
Windows client doesn't send session setup request if ksmbd set max
trans/read/write size lower than 64KB in smb2 negotiate.
It means windows allow at least 64 KB or more about this value.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
some memory leaks and panic. Also many minor fixes.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEh0DEKNP0I9IjwfWEqbAzH4MkB7YFAmFoMFQACgkQqbAzH4Mk
B7bTtQ/+KiF48deefbEEExjfT8Mm76+JE0XkdCPT0bXkhVNpqhRLSOQBR2hg5A81
7SSFHNbSMzXxiXdh2KfcXbBmwdJtcH1N9tjwffC3zhMkCTcDKnmDczz/lo4rHd0g
zZ3rPBP9yPCZGxo3W804XRYOeqLclrGJPI3kWQen+Rln/cZIzJMaHRUkVI22OYwj
e0dSdtabFDxJbdewz9xcvycHrPpVlrZUsuib/ZHFu2XGtgKalccgfvwBy5cOrTVh
N1WSBGcoy0xQGRGLP0o2hN62N2Md7/+UwWjXY+Wz4i+4gmziGvGuk8Y5uiSLu7lS
EG12xlrUtwouf4QaeleQZLT9Ym5YU3EALtKpZxAQi6Rm4A8Z6EMNUq0WBHJcNP/u
MRJlfK7jC25GnIFQjZtU+eMX8BT8MgMeSriv9FIY86T3ijedfxxEbb/cMvUGm2Hn
3hoQelLCUkLSqTyMeZiAv507AJv5MjfMrSJ9r9f36OxDer3w84VCVcxDtyGH++CR
fbRNjHvz7gYG5L5qwsFgfxSC/z+hyUXi01RalbosojsRyvg/f1p+yMxvQ57DrltY
IfHrMGcd9FlUiijBGFvyWQoMAl/pb6EIym2IMxr9X+aXgPJiG/BhWLbmzU4MYUUP
1PwIOpN2vhtU2Z3bVzbecxfy/TWjBhKBYe9jW1AH8KSSvLZExjk=
=QUnM
-----END PGP SIGNATURE-----
Merge tag 'ntfs3_for_5.15' of git://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 fixes from Konstantin Komarov:
"Use the new api for mounting as requested by Christoph.
Also fixed:
- some memory leaks and panic
- xfstests (tested on x86_64) generic/016 generic/021 generic/022
generic/041 generic/274 generic/423
- some typos, wrong returned error codes, dead code, etc"
* tag 'ntfs3_for_5.15' of git://github.com/Paragon-Software-Group/linux-ntfs3: (70 commits)
fs/ntfs3: Check for NULL pointers in ni_try_remove_attr_list
fs/ntfs3: Refactor ntfs_read_mft
fs/ntfs3: Refactor ni_parse_reparse
fs/ntfs3: Refactor ntfs_create_inode
fs/ntfs3: Refactor ntfs_readlink_hlp
fs/ntfs3: Rework ntfs_utf16_to_nls
fs/ntfs3: Fix memory leak if fill_super failed
fs/ntfs3: Keep prealloc for all types of files
fs/ntfs3: Remove unnecessary functions
fs/ntfs3: Forbid FALLOC_FL_PUNCH_HOLE for normal files
fs/ntfs3: Refactoring of ntfs_set_ea
fs/ntfs3: Remove locked argument in ntfs_set_ea
fs/ntfs3: Use available posix_acl_release instead of ntfs_posix_acl_release
fs/ntfs3: Check for NULL if ATTR_EA_INFO is incorrect
fs/ntfs3: Refactoring of ntfs_init_from_boot
fs/ntfs3: Reject mount if boot's cluster size < media sector size
fs/ntfs3: Refactoring lock in ntfs_init_acl
fs/ntfs3: Change posix_acl_equiv_mode to posix_acl_update_mode
fs/ntfs3: Pass flags to ntfs_set_ea in ntfs_set_acl_ex
fs/ntfs3: Refactor ntfs_get_acl_ex for better readability
...
The implementations of get_wchan() can be expensive. The only information
imparted here is whether or not a process is currently blocked in the
scheduler (and even this doesn't need to be exact). Avoid doing the
heavy lifting of stack walking and just report that information by using
task_is_running().
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211008111626.211281780@infradead.org
This reverts commit 152c432b12.
When a kernel address couldn't be symbolized for /proc/$pid/wchan, it
would leak the raw value, a potential information exposure. This is a
regression compared to the safer pre-v5.12 behavior.
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Vito Caputo <vcaputo@pengaru.com>
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20211008111626.090829198@infradead.org
Remove the few leftover instances of the xfs_dinode_t typedef.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Remove the few leftover instances of the xfs_dinode_t typedef.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Remove the few leftover instances of the xfs_dinode_t typedef.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Warn if we ever bump nlevels higher than the allowed maximum cursor
height.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When we're scanning for btree roots to rebuild the AG headers, make sure
that the proposed tree does not exceed the maximum height for that btree
type (and not just XFS_BTREE_MAXLEVELS).
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Since each btree type has its own precomputed maxlevels variable now,
use them instead of the generic XFS_BTREE_MAXLEVELS to check the level
of each per-AG btree.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Convert the on-stack scrub context, btree scrub context, and da btree
scrub context into a heap allocation so that we reduce stack usage and
gain the ability to handle tall btrees without issue.
Specifically, this saves us ~208 bytes for the dabtree scrub, ~464 bytes
for the btree scrub, and ~200 bytes for the main scrub context.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Get rid of this old typedef before we start changing other things.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The btree geometry computation function has an off-by-one error in that
it does not allow maximally tall btrees (nlevels == XFS_BTREE_MAXLEVELS).
This can result in repairs failing unnecessarily on very fragmented
filesystems. Subsequent patches to remove MAXLEVELS usage in favor of
the per-btree type computations will make this a much more likely
occurrence.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When log recovery tries to recover a transaction that had log intent
items attached to it, it has to save certain parts of the transaction
state (reservation, dfops chain, inodes with no automatic unlock) so
that it can finish single-stepping the recovered transactions before
finishing the chains.
This is done with the xfs_defer_ops_capture and xfs_defer_ops_continue
functions. Right now they open-code this functionality, so let's port
this to the formalized resource capture structure that we introduced in
the previous patch. This enables us to hold up to two inodes and two
buffers during log recovery, the same way we do for regular runtime.
With this patch applied, we'll be ready to support atomic extent swap
which holds two inodes; and logged xattrs which holds one inode and one
xattr leaf buffer.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Transaction users are allowed to flag up to two buffers and two inodes
for ownership preservation across a deferred transaction roll. Hoist
the variables and code responsible for this out of xfs_defer_trans_roll
so that we can use it for the defer capture mechanism.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
As Xiang mentioned, such path has no real impact to our current
decompression strategy, remove it directly. Also, update the return
value of z_erofs_lz4_decompress() to 0 if success to keep consistent
with LZMA which will return 0 as well for that case.
Link: https://lore.kernel.org/r/20211014065744.1787-1-zbestahu@gmail.com
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Grab uring lock when we are in io-worker rather than in the original
or system-wq context since we already hold it in these two situation.
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Fixes: b66ceaf324 ("io_uring: move iopoll reissue into regular IO path")
Link: https://lore.kernel.org/r/20211014140400.50235-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the check to validate compound response buffer.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
DataOffset and Length validation can be potencial 32bit overflow.
This patch fix it.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
* Requests except READ, WRITE, IOCTL, INFO, QUERY
DIRECOTRY, CANCEL must consume one credit.
* If client's granted credits are insufficient,
refuse to handle requests.
* Windows server 2016 or later grant up to 8192
credits to clients at once.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add validation for request/response buffer size check in smb2_ioctl and
fsctl_copychunk() take copychunk_ioctl_req pointer and the other arguments
instead of smb2_ioctl_req structure and remove an unused smb2_ioctl_req
argument of fsctl_validate_negotiate_info.
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Returning an undecorated integer is an age-old trope, but it's
not clear (even to previous experts in this code) that the only
valid return values are 1 and 0. These functions do not return
a negative errno, rpc_stat value, or a positive length.
Document there are only two valid return values by having
.pc_encode return only true or false.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The passed-in value of the "__be32 *p" parameter is now unused in
every server-side XDR encoder, and can be removed.
Note also that there is a line in each encoder that sets up a local
pointer to a struct xdr_stream. Passing that pointer from the
dispatcher instead saves one line per encoder function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Refactor: Currently nfs4svc_encode_compoundres() relies on the NFS
dispatcher to pass in the buffer location of the COMPOUND status.
Instead, save that buffer location in struct nfsd4_compoundres.
The compound tag follows immediately after.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Returning an undecorated integer is an age-old trope, but it's
not clear (even to previous experts in this code) that the only
valid return values are 1 and 0. These functions do not return
a negative errno, rpc_stat value, or a positive length.
Document there are only two valid return values by having
.pc_decode return only true or false.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The passed-in value of the "__be32 *p" parameter is now unused in
every server-side XDR decoder, and can be removed.
Note also that there is a line in each decoder that sets up a local
pointer to a struct xdr_stream. Passing that pointer from the
dispatcher instead saves one line per decoder function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-----BEGIN PGP SIGNATURE-----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=u3qV
-----END PGP SIGNATURE-----
Merge tag 'for-5.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more error handling fixes, stemming from code inspection, error
injection or fuzzing"
* tag 'for-5.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix abort logic in btrfs_replace_file_extents
btrfs: check for error when looking up inode during dir entry replay
btrfs: unify lookup return value when dir entry is missing
btrfs: deal with errors when adding inode reference during log replay
btrfs: deal with errors when replaying dir entry during log replay
btrfs: deal with errors when checking if a dir entry exists during log replay
btrfs: update refs for any root except tree log roots
btrfs: unlock newly allocated extent buffer after error
In f2fs_balance_fs_bg(), it needs to check both NAT_ENTRIES and INO_ENTRIES
memory usage to decide whether we should skip background checkpoint, otherwise
we may always skip checking INO_ENTRIES memory usage, so that INO_ENTRIES may
potentially cause high memory footprint.
Fixes: 493720a485 ("f2fs: fix to avoid REQ_TIME and CP_TIME collision")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Since active_logs can be set to 2 or 4 or NR_CURSEG_PERSIST_TYPE(6),
it cannot be set to NR_CURSEG_TYPE(8).
That is, whint_mode is always off.
Therefore, the condition is changed from NR_CURSEG_TYPE to NR_CURSEG_PERSIST_TYPE.
Cc: Chao Yu <chao@kernel.org>
Fixes: d0b9e42ab6 (f2fs: introduce inmem curseg)
Reported-by: tanghuan <tanghuan@vivo.com>
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For kmalloc() allocations SLOB prepends the blocks with a 4-byte header,
and it puts the size of the allocated blocks in that header.
Blocks allocated with kmem_cache_alloc() allocations do not have that
header.
SLOB explodes when you allocate memory with kmem_cache_alloc() and then
try to free it with kfree() instead of kmem_cache_free().
SLOB will assume that there is a header when there is none, read some
garbage to size variable and corrupt the adjacent objects, which
eventually leads to hang or panic.
Let's make XFS work with SLOB by using proper free function.
Fixes: 9749fee83f ("xfs: enable the xfs_defer mechanism to process extents to free")
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Use 2-factor argument multiplication form kvcalloc() instead of
kvzalloc().
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The reference counting issue happens in one exception handling
path of orangefs_mount(). When failing to allocate sb info, the
function forgets to decrease the refcount of sb increased by
sget(), causing a refcount leak.
Fix this issue by jumping to the label "free_sb_and_op" instead
of "free_op"
Signed-off-by: Chenyuan Mi <cymi20@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
When op_alloc() returns NULL to new_op, no error return code of
orangefs_revalidate_lookup() is assigned.
To fix this bug, ret is assigned with -ENOMEM in this case.
Fixes: 8bb8aefd5a ("OrangeFS: Change almost all instances of the string PVFS2 to OrangeFS.")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
The variable ret is being initialized with a value that is never read, it
is being updated later on. The assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Change argument from void* to struct REPARSE_DATA_BUFFER*
We copy data to buffer, so we can read it later in ntfs_read_mft.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Now ntfs_utf16_to_nls takes length as one of arguments.
If length of symlink > 255, then we tried to convert
length of symlink +- some random number.
Now 255 symbols limit was removed.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
In ntfs_init_fs_context we allocate memory in fc->s_fs_info.
In case of failed mount we must free it in ntfs_fill_super.
We can't do it in ntfs_fs_free, because ntfs_fs_free called
with fc->s_fs_info == NULL.
fc->s_fs_info became NULL in sget_fc.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Before we haven't kept prealloc for sparse files because we thought that
it will speed up create / write operations.
It lead to situation, when user reserved some space for sparse file,
filled volume, and wasn't able to write in reserved file.
With this commit we keep prealloc.
Now xfstest generic/274 pass.
Fixes: be71b5cba2 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The block number in the quota tree on disk should be smaller than the
v2_disk_dqinfo.dqi_blocks. If the quota file was corrupted, we may be
allocating an 'allocated' block and that would lead to a loop in a tree,
which will probably trigger oops later. This patch adds a check for the
block number in the quota tree to prevent such potential issue.
Link: https://lore.kernel.org/r/20211008093821.1001186-2-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Partially revert commit 2ce209c42c ("NFS: Wait for requests that are
locked on the commit list"), since it can lead to deadlocks between
commit requests and nfs_join_page_group().
For now we should assume that any locked requests on the commit list are
either about to be removed and committed by another task, or the writes
they describe are about to be retransmitted. In either case, we should
not need to worry.
Fixes: 2ce209c42c ("NFS: Wait for requests that are locked on the commit list")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Generate a trace event whenever the NFS client modifies the size of
a file. These new events aid troubleshooting workloads that trigger
races around size updates.
There are four new trace points, all named nfs_size_something so
they are easy to grep for or enable as a group with a single glob.
Size updated on the server:
kworker/u24:10-194 [010] 369.939174: nfs_size_update: fileid=00:28:2 fhandle=0x36fbbe51 version=1752899344277980615 cursize=250471 newsize=172083
Server-side size update reported via NFSv3 WCC attributes:
fsx-1387 [006] 380.760686: nfs_size_wcc: fileid=00:28:2 fhandle=0x36fbbe51 version=1752899355909932456 cursize=146792 newsize=171216
File has been truncated locally:
fsx-1387 [007] 369.437421: nfs_size_truncate: fileid=00:28:2 fhandle=0x36fbbe51 version=1752899231200117272 cursize=215244 newsize=0
File has been extended locally:
fsx-1387 [007] 369.439213: nfs_size_grow: fileid=00:28:2 fhandle=0x36fbbe51 version=1752899343704248410 cursize=258048 newsize=262144
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up: TRACE_DEFINE_ENUM is unnecessary because the target
symbols are all C macros, not enums.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-----BEGIN PGP SIGNATURE-----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=9ERH
-----END PGP SIGNATURE-----
Merge tag '5.15-rc4-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull ksmbd fixes from Steve French:
"Six fixes for the ksmbd kernel server, including two additional
overflow checks, a fix for oops, and some cleanup (e.g. remove dead
code for less secure dialects that has been removed)"
* tag '5.15-rc4-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix oops from fuse driver
ksmbd: fix version mismatch with out of tree
ksmbd: use buf_data_size instead of recalculation in smb3_decrypt_req()
ksmbd: remove the leftover of smb2.0 dialect support
ksmbd: check strictly data area in ksmbd_smb2_check_message()
ksmbd: add the check to vaildate if stream protocol length exceeds maximum value
The tracefs file system is by default mounted such that only root user can
access it. But there are legitimate reasons to create a group and allow
those added to the group to have access to tracing. By changing the
permissions of the tracefs mount point to allow access, it will allow
group access to the tracefs directory.
There should not be any real reason to allow all access to the tracefs
directory as it contains sensitive information. Have the default
permission of directories being created not have any OTH (other) bits set,
such that an admin that wants to give permission to a group has to first
disable all OTH bits in the file system.
Link: https://lkml.kernel.org/r/20210818153038.664127804@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Today when a signal is delivered with a handler of SIG_DFL whose
default behavior is to generate a core dump not only that process but
every process that shares the mm is killed.
In the case of vfork this looks like a real world problem. Consider
the following well defined sequence.
if (vfork() == 0) {
execve(...);
_exit(EXIT_FAILURE);
}
If a signal that generates a core dump is received after vfork but
before the execve changes the mm the process that called vfork will
also be killed (as the mm is shared).
Similarly if the execve fails after the point of no return the kernel
delivers SIGSEGV which will kill both the exec'ing process and because
the mm is shared the process that called vfork as well.
As far as I can tell this behavior is a violation of people's
reasonable expectations, POSIX, and is unnecessarily fragile when the
system is low on memory.
Solve this by making a userspace visible change to only kill a single
process/thread group. This is possible because Jann Horn recently
modified[1] the coredump code so that the mm can safely be modified
while the coredump is happening. With LinuxThreads long gone I don't
expect anyone to have a notice this behavior change in practice.
To accomplish this move the core_state pointer from mm_struct to
signal_struct, which allows different thread groups to coredump
simultatenously.
In zap_threads remove the work to kill anything except for the current
thread group.
v2: Remove core_state from the VM_BUG_ON_MM print to fix
compile failure when CONFIG_DEBUG_VM is enabled.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
[1] a07279c9a8 ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot")
Fixes: d89f3847def4 ("[PATCH] thread-aware coredumps, 2.5.43-C3")
History-tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Link: https://lkml.kernel.org/r/87y27mvnke.fsf@disp2133
Link: https://lkml.kernel.org/r/20211007144701.67592574@canb.auug.org.au
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Error injection testing uncovered a case where we'd end up with a
corrupt file system with a missing extent in the middle of a file. This
occurs because the if statement to decide if we should abort is wrong.
The only way we would abort in this case is if we got a ret !=
-EOPNOTSUPP and we called from the file clone code. However the
prealloc code uses this path too. Instead we need to abort if there is
an error, and the only error we _don't_ abort on is -EOPNOTSUPP and only
if we came from the clone file code.
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At replay_one_name(), we are treating any error from btrfs_lookup_inode()
as if the inode does not exists. Fix this by checking for an error and
returning it to the caller.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_lookup_dir_index_item() and btrfs_lookup_dir_item() lookup for dir
entries and both are used during log replay or when updating a log tree
during an unlink.
However when the dir item does not exists, btrfs_lookup_dir_item() returns
NULL while btrfs_lookup_dir_index_item() returns PTR_ERR(-ENOENT), and if
the dir item exists but there is no matching entry for a given name or
index, both return NULL. This makes the call sites during log replay to
be more verbose than necessary and it makes it easy to miss this slight
difference. Since we don't need to distinguish between those two cases,
make btrfs_lookup_dir_index_item() always return NULL when there is no
matching directory entry - either because there isn't any dir entry or
because there is one but it does not match the given name and index.
Also rename the argument 'objectid' of btrfs_lookup_dir_index_item() to
'index' since it is supposed to match an index number, and the name
'objectid' is not very good because it can easily be confused with an
inode number (like the inode number a dir entry points to).
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At __inode_add_ref(), we treating any error returned from
btrfs_lookup_dir_item() or from btrfs_lookup_dir_index_item() as meaning
that there is no existing directory entry in the fs/subvolume tree.
This is not correct since we can get errors such as, for example, -EIO
when reading extent buffers while searching the fs/subvolume's btree.
So fix that and return the error to the caller when it is not -ENOENT.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At replay_one_one(), we are treating any error returned from
btrfs_lookup_dir_item() or from btrfs_lookup_dir_index_item() as meaning
that there is no existing directory entry in the fs/subvolume tree.
This is not correct since we can get errors such as, for example, -EIO
when reading extent buffers while searching the fs/subvolume's btree.
So fix that and return the error to the caller when it is not -ENOENT.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently inode_in_dir() ignores errors returned from
btrfs_lookup_dir_index_item() and from btrfs_lookup_dir_item(), treating
any errors as if the directory entry does not exists in the fs/subvolume
tree, which is obviously not correct, as we can get errors such as -EIO
when reading extent buffers while searching the fs/subvolume's tree.
Fix that by making inode_in_dir() return the errors and making its only
caller, add_inode_ref(), deal with returned errors as well.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I hit a stuck relocation on btrfs/061 during my overnight testing. This
turned out to be because we had left over extent entries in our extent
root for a data reloc inode that no longer existed. This happened
because in btrfs_drop_extents() we only update refs if we have SHAREABLE
set or we are the tree_root. This regression was introduced by
aeb935a455 ("btrfs: don't set SHAREABLE flag for data reloc tree")
where we stopped setting SHAREABLE for the data reloc tree.
The problem here is we actually do want to update extent references for
data extents in the data reloc tree, in fact we only don't want to
update extent references if the file extents are in the log tree.
Update this check to only skip updating references in the case of the
log tree.
This is relatively rare, because you have to be running scrub at the
same time, which is what btrfs/061 does. The data reloc inode has its
extents pre-allocated, and then we copy the extent into the
pre-allocated chunks. We theoretically should never be calling
btrfs_drop_extents() on a data reloc inode. The exception of course is
with scrub, if our pre-allocated extent falls inside of the block group
we are scrubbing, then the block group will be marked read only and we
will be forced to cow that extent. This means we will call
btrfs_drop_extents() on that range when we COW that file extent.
This isn't really problematic if we do this, the data reloc inode
requires that our extent lengths match exactly with the extent we are
copying, thankfully we validate the extent is correct with
get_new_location(), so if we happen to COW only part of the extent we
won't link it in when we do the relocation, so we are safe from any
other shenanigans that arise because of this interaction with scrub.
Fixes: aeb935a455 ("btrfs: don't set SHAREABLE flag for data reloc tree")
CC: stable@vger.kernel.org # 5.8+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=X7mM
-----END PGP SIGNATURE-----
Merge tag 'misc-fixes-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfslib, cachefiles and afs fixes from David Howells:
- Fix another couple of oopses in cachefiles tracing stemming from the
possibility of passing in a NULL object pointer
- Fix netfs_clear_unread() to set READ on the iov_iter so that source
it is passed to doesn't do the wrong thing (some drivers look at the
flag on iov_iter rather than other available information to determine
the direction)
- Fix afs_launder_page() to write back at the correct file position on
the server so as not to corrupt data
* tag 'misc-fixes-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix afs_launder_page() to set correct start file position
netfs: Fix READ/WRITE confusion when calling iov_iter_xarray()
cachefiles: Fix oops with cachefiles_cull() due to NULL object
Marios reported kernel oops from fuse driver when ksmbd call
mark_inode_dirty(). This patch directly update ->i_ctime after removing
mark_inode_ditry() and notify_change will put inode to dirty list.
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Reported-by: Marios Makassikis <mmakassikis@freebox.fr>
Tested-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix version mismatch with out of tree, This updated version will be
matched with ksmbd-tools.
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Tom suggested to use buf_data_size that is already calculated, to verify
these offsets.
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Suggested-by: Tom Talpey <tom@talpey.com>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Although ksmbd doesn't send SMB2.0 support in supported dialect list of smb
negotiate response, There is the leftover of smb2.0 dialect.
This patch remove it not to support SMB2.0 in ksmbd.
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When invalid data offset and data length in request,
ksmbd_smb2_check_message check strictly and doesn't allow to process such
requests.
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If nfsd has existing listening sockets without any processes, then an error
returned from svc_create_xprt() for an additional transport will remove
those existing listeners. We're seeing this in practice when userspace
attempts to create rpcrdma transports without having the rpcrdma modules
present before creating nfsd kernel processes. Fix this by checking for
existing sockets before calling nfsd_destroy().
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Rename coredump_exit_mm to coredump_task_exit and call it from do_exit
before PTRACE_EVENT_EXIT, and before any cleanup work for a task
happens. This ensures that an accurate copy of the process can be
captured in the coredump as no cleanup for the process happens before
the coredump completes. This also ensures that PTRACE_EVENT_EXIT
will not be visited by any thread until the coredump is complete.
Add a new flag PF_POSTCOREDUMP so that tasks that have passed through
coredump_task_exit can be recognized and ignored in zap_process.
Now that all of the coredumping happens before exit_mm remove code to
test for a coredump in progress from mm_release.
Replace "may_ptrace_stop()" with a simple test of "current->ptrace".
The other tests in may_ptrace_stop all concern avoiding stopping
during a coredump. These tests are no longer necessary as it is now
guaranteed that fatal_signal_pending will be set if the code enters
ptrace_stop during a coredump. The code in ptrace_stop is guaranteed
not to stop if fatal_signal_pending returns true.
Until this change "ptrace_event(PTRACE_EVENT_EXIT)" could call
ptrace_stop without fatal_signal_pending being true, as signals are
dequeued in get_signal before calling do_exit. This is no longer
an issue as "ptrace_event(PTRACE_EVENT_EXIT)" is no longer reached
until after the coredump completes.
Link: https://lkml.kernel.org/r/874kaax26c.fsf@disp2133
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Separate the coredump logic from the ordinary exit_mm logic
by moving the coredump logic out of exit_mm into it's own
function coredump_exit_mm.
Link: https://lkml.kernel.org/r/87a6k2x277.fsf@disp2133
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Prevent exec continuing when a fatal signal is pending by replacing
mmap_read_lock with mmap_read_lock_killable. This is always the right
thing to do as userspace will never observe an exec complete when
there is a fatal signal pending.
With that change it becomes unnecessary to explicitly test for a core
dump in progress. In coredump_wait zap_threads arranges under
mmap_write_lock for all tasks that use a mm to also have SIGKILL
pending, which means mmap_read_lock_killable will always return -EINTR
when old_mm->core_state is present.
Link: https://lkml.kernel.org/r/87fstux27w.fsf@disp2133
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This patch add MAX_STREAM_PROT_LEN macro and check if stream protocol
length exceeds maximum value. opencode pdu size check in
ksmbd_pdu_size_has_room().
Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=kSrV
-----END PGP SIGNATURE-----
Merge tag 'warning-fixes-20211005' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull misc fs warning fixes from David Howells:
"The first four patches fix kerneldoc warnings in fscache, afs, 9p and
nfs - they're mostly just comment changes, though there's one place in
9p where a comment got detached from the function it was attached to
(v9fs_fid_add) and has to switch places with a function that got
inserted between (__add_fid).
The patch on the end removes an unused symbol in fscache"
* tag 'warning-fixes-20211005' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache: Remove an unused static variable
fscache: Fix some kerneldoc warnings shown up by W=1
9p: Fix a bunch of kerneldoc warnings shown up by W=1
afs: Fix kerneldoc warning shown up by W=1
nfs: Fix kerneldoc warning shown up by W=1
If one ends up expanding on this line checkpatch will complain that the
combination S_IRWXU|S_IRUGO|S_IXUGO should just be replaced with the
octal 0755. Do that.
This makes no functional changes.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927163805.808907-9-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't need ntfs_xattr_get_acl and ntfs_xattr_set_acl.
There are ntfs_get_acl_ex and ntfs_set_acl_ex.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
If one ends up extending this line checkpatch will complain about the
use of S_IRWXUGO suggesting it is not preferred and that 0777
should be used instead. Take the tip from checkpatch and do that
change before we do our subsequent changes.
This makes no functional changes.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927163805.808907-8-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
FALLOC_FL_PUNCH_HOLE isn't allowed with normal files.
Filesystem must remember info about hole, but for normal file
we can only zero it and forget.
Fixes: 4342306f0f ("fs/ntfs3: Add file operations and implementation")
Now xfstests generic/016 generic/021 generic/022 pass.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
/proc/uptime reports idle time by reading the CPUTIME_IDLE field from
the per-cpu kcpustats. However, on NO_HZ systems, idle time is not
continually updated on idle cpus, leading this value to appear
incorrectly small.
/proc/stat performs an accounting update when reading idle time; we
can use the same approach for uptime.
With this patch, /proc/stat and /proc/uptime now agree on idle time.
Additionally, the following shows idle time tick up consistently on an
idle machine:
(while true; do cat /proc/uptime; sleep 1; done) | awk '{print $2-prev; prev=$2}'
Reported-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lkml.kernel.org/r/20210827165438.3280779-1-joshdon@google.com
Make code more readable.
Don't try to read zero bytes.
Add warning when size of exteneded attribute exceeds limit.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We always need to lock now, because locks became smaller
(see d562e901f2
"fs/ntfs3: Move ni_lock_dir and ni_unlock into ntfs_create_inode").
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We don't need to maintain ntfs_posix_acl_release.
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYVrm7wAKCRDh3BK/laaZ
PCTFAQDESDvQTW4tLj8jdb9ELVCekNtgU6bVJCgUWqR6M1iZcgD8DiqinvagWhEN
K8R/ayWMaPSMA3NEDTlLHy8Bx2iqow4=
=PvJ5
-----END PGP SIGNATURE-----
Merge tag 'ovl-fixes-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix two bugs, both of them corner cases not affecting most users"
* tag 'ovl-fixes-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix IOCB_DIRECT if underlying fs doesn't support direct IO
ovl: fix missing negative dentry check in ovl_rename()
Since the openat2(2) syscall uses a struct open_how pointer to communicate
its parameters they are not usefully recorded by the audit SYSCALL record's
four existing arguments.
Add a new audit record type OPENAT2 that reports the parameters in its
third argument, struct open_how with fields oflag, mode and resolve.
The new record in the context of an event would look like:
time->Wed Mar 17 16:28:53 2021
type=PROCTITLE msg=audit(1616012933.531:184): proctitle=
73797363616C6C735F66696C652F6F70656E617432002F746D702F61756469742D
7465737473756974652D737641440066696C652D6F70656E617432
type=PATH msg=audit(1616012933.531:184): item=1 name="file-openat2"
inode=29 dev=00:1f mode=0100600 ouid=0 ogid=0 rdev=00:00
obj=unconfined_u:object_r:user_tmp_t:s0 nametype=CREATE
cap_fp=0 cap_fi=0 cap_fe=0 cap_fver=0 cap_frootid=0
type=PATH msg=audit(1616012933.531:184):
item=0 name="/root/rgb/git/audit-testsuite/tests"
inode=25 dev=00:1f mode=040700 ouid=0 ogid=0 rdev=00:00
obj=unconfined_u:object_r:user_tmp_t:s0 nametype=PARENT
cap_fp=0 cap_fi=0 cap_fe=0 cap_fver=0 cap_frootid=0
type=CWD msg=audit(1616012933.531:184):
cwd="/root/rgb/git/audit-testsuite/tests"
type=OPENAT2 msg=audit(1616012933.531:184):
oflag=0100302 mode=0600 resolve=0xa
type=SYSCALL msg=audit(1616012933.531:184): arch=c000003e syscall=437
success=yes exit=4 a0=3 a1=7ffe315f1c53 a2=7ffe315f1550 a3=18
items=2 ppid=528 pid=540 auid=0 uid=0 gid=0 euid=0 suid=0
fsuid=0 egid=0 sgid=0 fsgid=0 tty=ttyS0 ses=1 comm="openat2"
exe="/root/rgb/git/audit-testsuite/tests/syscalls_file/openat2"
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023
key="testsuite-1616012933-bjAUcEPO"
Link: https://lore.kernel.org/r/d23fbb89186754487850367224b060e26f9b7181.1621363275.git.rgb@redhat.com
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
[PM: tweak subject, wrap example, move AUDIT_OPENAT2 to 1337]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Replace uses of mem_encrypt_active() with calls to cc_platform_has() with
the CC_ATTR_MEM_ENCRYPT attribute.
Remove the implementation of mem_encrypt_active() across all arches.
For s390, since the default implementation of the cc_platform_has()
matches the s390 implementation of mem_encrypt_active(), cc_platform_has()
does not need to be implemented in s390 (the config option
ARCH_HAS_CC_PLATFORM is not set).
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210928191009.32551-9-bp@alien8.de
It's been reported that doing stress test for module insertion and
removal can result in an ENOENT from libkmod for a valid module.
In kernfs_iop_lookup() a negative dentry is created if there's no kernfs
node associated with the dentry or the node is inactive.
But inactive kernfs nodes are meant to be invisible to the VFS and
creating a negative dentry for these can have unexpected side effects
when the node transitions to an active state.
The point of creating negative dentries is to avoid the expensive
alloc/free cycle that occurs if there are frequent lookups for kernfs
attributes that don't exist. So kernfs nodes that are not yet active
should not result in a negative dentry being created so when they
transition to an active state VFS lookups can create an associated
dentry is a natural way.
It's also been reported that https://github.com/osandov/blktests.git
test block/001 hangs during the test. It was suggested that recent
changes to blktests might have caused it but applying this patch
resolved the problem without change to blktests.
Fixes: c7e7c04274 ("kernfs: use VFS negative dentry caching")
Tested-by: Yi Zhang <yi.zhang@redhat.com>
ACKed-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/163330943316.19450.15056895533949392922.stgit@mickey.themaw.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_nfs4_pnfs_v3/v4_ds_connect do
some work
smp_wmb
ds->ds_clp = clp;
And nfs4_ff_layout_prepare_ds currently does
smp_rmb
if(ds->ds_clp)
...
This patch places the smp_rmb after the if. This ensures that following
reads only happen once nfs4_ff_layout_prepare_ds has checked that data
has been properly initialized.
Fixes: d67ae825a5 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The original premise in commit 83672d392f ("NFS: Fix directory caching
problem - with test case and patch.") was that readdirplus was caching
attribute information and replaying it later. This is no longer the
case.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the directory changed while we were revalidating the dentry, then
don't update the dentry verifier. There is no value in setting the
verifier to an older value, and we could end up overwriting a more up to
date verifier from a parallel revalidation.
Fixes: efeda80da3 ("NFSv4: Fix revalidation of dentries with delegations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
If a user is doing 'ls -l', we have a heuristic in GETATTR that tells
the readdir code to try to use READDIRPLUS in order to refresh the inode
attributes. In certain cirumstances, we also try to invalidate the
remaining directory entries in order to ensure this refresh.
If there are multiple readers of the directory, we probably should avoid
invalidating the page cache, since the heuristic breaks down in that
situation anyway.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
The check for duplicate readdir cookies should only care if the change
attribute is invalid or the data cache is invalid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
If we want to revalidate the directory, then just mark the change
attribute as invalid.
Fixes: 13c0b082b6 ("NFS: Replace use of NFS_INO_REVAL_PAGECACHE when checking cache validity")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
NFS_INO_DATA_INVAL_DEFER and NFS_INO_INVALID_DATA should be considered
mutually exclusive.
Fixes: 1c341b7775 ("NFS: Add deferred cache invalidation for close-to-open consistency violations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Both NFSv3 and NFSv2 generate their change attribute from the ctime
value that was supplied by the server. However the problem is that there
are plenty of servers out there with ctime resolutions of 1ms or worse.
In a modern performance system, this is insufficient when trying to
decide which is the most recent set of attributes when, for instance, a
READ or GETATTR call races with a WRITE or SETATTR.
For this reason, let's revert to labelling the NFSv2/v3 change
attributes as NFS4_CHANGE_TYPE_IS_UNDEFINED. This will ensure we protect
against such races.
Fixes: 7b24dacf08 ("NFS: Another inode revalidation improvement")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
NFS4_CREATE_EXCLUSIVE does not allow the caller to set an access mode,
so for most Linux filesystems, the access call ends up returning no
permissions. However both NFS4_CREATE_EXCLUSIVE4_1 and
NFS4_CREATE_GUARDED allow the client to set the access mode.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the cached credential exists but doesn't have any expiration callback
then exit early.
Fix up atomicity issues when replacing the credential with a new one
since the existing code could lead to refcount leaks.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
After the success of an operation such as rmdir() or unlink(), we expect
to add the dentry back to the dcache as an ordinary negative dentry.
However in NFS, unless it is labelled with the appropriate verifier for
the parent directory state, then nfs_lookup_revalidate will end up
discarding that dentry and forcing a new lookup.
The fix is to ensure that we relabel the dentry appropriately on
success.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
After the success of an operation such as link(), or symlink(), we
expect to add the dentry back to the dcache as an ordinary positive
dentry.
However in NFS, unless it is labelled with the appropriate verifier for
the parent directory state, then nfs_lookup_revalidate will end up
discarding that dentry and forcing a new lookup.
The fix is to ensure that we relabel the dentry appropriately on
success.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
In commit b212921b13 ("elf: don't use MAP_FIXED_NOREPLACE for elf
executable mappings") we still leave MAP_FIXED_NOREPLACE in place for
load_elf_interp.
Unfortunately, this will cause kernel to fail to start with:
1 (init): Uhuuh, elf segment at 00003ffff7ffd000 requested but the memory is mapped already
Failed to execute /init (error -17)
The reason is that the elf interpreter (ld.so) has overlapping segments.
readelf -l ld-2.31.so
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x000000000002c94c 0x000000000002c94c R E 0x10000
LOAD 0x000000000002dae0 0x000000000003dae0 0x000000000003dae0
0x00000000000021e8 0x0000000000002320 RW 0x10000
LOAD 0x000000000002fe00 0x000000000003fe00 0x000000000003fe00
0x00000000000011ac 0x0000000000001328 RW 0x10000
The reason for this problem is the same as described in commit
ad55eac74f ("elf: enforce MAP_FIXED on overlaying elf segments").
Not only executable binaries, elf interpreters (e.g. ld.so) can have
overlapping elf segments, so we better drop MAP_FIXED_NOREPLACE and go
back to MAP_FIXED in load_elf_interp.
Fixes: 4ed2863951 ("fs, elf: drop MAP_FIXED usage from elf_map")
Cc: <stable@vger.kernel.org> # v4.19
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
allocation. Also fix error handling code paths in ext4_dx_readdir()
and ext4_fill_super(). Finally, avoid a grabbing a journal head in
the delayed allocation write in the common cases where we are
overwriting an pre-existing block or appending to an inode.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmFZ2SsACgkQ8vlZVpUN
gaN6DAgAkIeisL1EfQT0VwshEs8y7N6IoX8dydLSRLpNf5oWiJOv2CTY9Qpi6X/C
qNfuLsbJ2NXChvhIAM2hD82hvX21rYc6iqPxgho02VF4eYIP7NzLjwTFKnKbHPB5
TiF498nJTnkcmSrJUEXmSAEdLoCwa5THH9+9HVHXZrkLXPULBtOOJ85mDAcIzVhV
Zqb7yfbpWl0gnF0S0YjNATPtbhcC9EiC4MOVYVesRlgT9B3+k5q4fmVU0euTU9OH
F2H6TNG+Mg/19gTnDP5acB9+eXHvYEqMpe+CaDifR9iFE9PTG/Edhxr6z9roXhHr
kBvEVHSFH+YTEJXghnpS9YDd9Lwc9w==
=WKzd
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a number of ext4 bugs in fast_commit, inline data, and delayed
allocation.
Also fix error handling code paths in ext4_dx_readdir() and
ext4_fill_super().
Finally, avoid a grabbing a journal head in the delayed allocation
write in the common cases where we are overwriting a pre-existing
block or appending to an inode"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: recheck buffer uptodate bit under buffer lock
ext4: fix potential infinite loop in ext4_dx_readdir()
ext4: flush s_error_work before journal destroy in ext4_fill_super
ext4: fix loff_t overflow in ext4_max_bitmap_size()
ext4: fix reserved space counter leakage
ext4: limit the number of blocks in one ADD_RANGE TLV
ext4: enforce buffer head state assertion in ext4_da_map_blocks
ext4: remove extent cache entries when truncating inline data
ext4: drop unnecessary journal handle in delalloc write
ext4: factor out write end code of inline file
ext4: correct the error path of ext4_write_inline_data_end()
ext4: check and update i_disksize properly
ext4: add error checking to ext4_ext_replay_set_iblocks()
Here are some driver core and kernfs fixes for reported issues for
5.15-rc4. These fixes include:
- kernfs positive dentry bugfix
- debugfs_create_file_size error path fix
- cpumask sysfs file bugfix to preserve the user/kernel abi (has
been reported multiple times.)
- devlink fixes for mdiobus devices as reported by the subsystem
maintainers.
Also included in here are some devlink debugging changes to make it
easier for people to report problems when asked. They have already
helped with the mdiobus and other subsystems reporting issues.
All of these have been linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYVmC1A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykfCQCgtQ0kdPoPdUG6mPCn45rrbJQLBY4AnRL5JyhO
zB60l6C2EHHnLnRxMnQq
=gygB
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some driver core and kernfs fixes for reported issues for
5.15-rc4. These fixes include:
- kernfs positive dentry bugfix
- debugfs_create_file_size error path fix
- cpumask sysfs file bugfix to preserve the user/kernel abi (has been
reported multiple times.)
- devlink fixes for mdiobus devices as reported by the subsystem
maintainers.
Also included in here are some devlink debugging changes to make it
easier for people to report problems when asked. They have already
helped with the mdiobus and other subsystems reporting issues.
All of these have been linux-next for a while with no reported issues"
* tag 'driver-core-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kernfs: also call kernfs_set_rev() for positive dentry
driver core: Add debug logs when fwnode links are added/deleted
driver core: Create __fwnode_link_del() helper function
driver core: Set deferred probe reason when deferred by driver core
net: mdiobus: Set FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD for mdiobus parents
driver core: fw_devlink: Add support for FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD
driver core: fw_devlink: Improve handling of cyclic dependencies
cpumask: Omit terminating null byte in cpumap_print_{list,bitmask}_to_buf
debugfs: debugfs_create_file_size(): use IS_ERR to check for error
-----BEGIN PGP SIGNATURE-----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=X733
-----END PGP SIGNATURE-----
Merge tag '5.15-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
"Eleven fixes for the ksmbd kernel server, mostly security related:
- an important fix for disabling weak NTLMv1 authentication
- seven security (improved buffer overflow checks) fixes
- fix for wrong infolevel struct used in some getattr/setattr paths
- two small documentation fixes"
* tag '5.15-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: missing check for NULL in convert_to_nt_pathname()
ksmbd: fix transform header validation
ksmbd: add buffer validation for SMB2_CREATE_CONTEXT
ksmbd: add validation in smb2 negotiate
ksmbd: add request buffer validation in smb2_set_info
ksmbd: use correct basic info level in set_file_basic_info()
ksmbd: remove NTLMv1 authentication
ksmbd: fix documentation for 2 functions
MAINTAINERS: rename cifs_common to smbfs_common in cifs and ksmbd entry
ksmbd: fix invalid request buffer access in compound
ksmbd: remove RFC1002 check in smb2 request
Refactor.
Now that the NFSv2 and NFSv3 XDR decoders have been converted to
use xdr_streams, the WRITE decoder functions can use
xdr_stream_subsegment() to extract the WRITE payload into its own
xdr_buf, just as the NFSv4 WRITE XDR decoder currently does.
That makes it possible to pass the first kvec, pages array + length,
page_base, and total payload length via a single function parameter.
The payload's page_base is not yet assigned or used, but will be in
subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pointer ni is being initialized with plain integer zero. Fix
this by initializing with NULL.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Most of the fields in 'struct knfsd_fh' are 2 levels deep (a union and a
struct) and are accessed using macros like:
#define fh_FOO fh_base.fh_new.fb_FOO
This patch makes the union and struct anonymous, so that "fh_FOO" can be
a name directly within 'struct knfsd_fh' and the #defines aren't needed.
The file handle as a whole is sometimes accessed as "fh_base" or
"fh_base.fh_pad", neither of which are particularly helpful names.
As the struct holding the filehandle is now anonymous, we
cannot use the name of that, so we union it with 'fh_raw' and use that
where the raw filehandle is needed. fh_raw also ensure the structure is
large enough for the largest possible filehandle.
fh_raw is a 'char' array, removing any need to cast it for memcpy etc.
SVCFH_fmt() is simplified using the "%ph" printk format. This
changes the appearance of filehandles in dprintk() debugging, making
them a little more precise.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Filehandles not in the "new" or "version 1" format have not been handed
out for new mounts since Linux 2.4 which was released 20 years ago.
I think it is safe to say that no such file handles are still in use,
and that we can drop support for them.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A small part of the declaration concerning filehandle format are
currently in the "uapi" include directory:
include/uapi/linux/nfsd/nfsfh.h
There is a lot more to the filehandle format, including "enum fid_type"
and "enum nfsd_fsid" which are not exported via "uapi".
This small part of the filehandle definition is of minimal use outside
of the kernel, and I can find no evidence that an other code is using
it. Certainly nfs-utils and wireshark (The most likely candidates) do not
use these declarations.
So move it out of "uapi" by copying the content from
include/uapi/linux/nfsd/nfsfh.h
into
fs/nfsd/nfsfh.h
A few unnecessary "#include" directives are not copied, and neither is
the #define of fh_auth, which is annotated as being for userspace only.
The copyright claims in the uapi file are identical to those in the nfsd
file, so there is no need to copy those.
The "__u32" style integer types are only needed in "uapi". In
kernel-only code we can use the more familiar "u32" style.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-----BEGIN PGP SIGNATURE-----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=qP3G
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.15-2021-10-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two fixes in here:
- The signal issue that was discussed start of this week (me).
- Kill dead fasync support in io_uring. Looks like it was broken
since io_uring was initially merged, and given that nobody has ever
complained about it, let's just kill it (Pavel)"
* tag 'io_uring-5.15-2021-10-01' of git://git.kernel.dk/linux-block:
io_uring: kill fasync
io-wq: exclusively gate signal based exit on get_signal() return
We have never supported fasync properly, it would only fire when there
is something polling io_uring making it useless. The original support came
in through the initial io_uring merge for 5.1. Since it's broken and
nobody has reported it, get rid of the fasync bits.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2f7ca3d344d406d34fa6713824198915c41cea86.1633080236.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 8e33fadf94 ("ext4: remove an unnecessary if statement in
__ext4_get_inode_loc()") forget to recheck buffer's uptodate bit again
under buffer lock, which may overwrite the buffer if someone else have
already brought it uptodate and changed it.
Fixes: 8e33fadf94 ("ext4: remove an unnecessary if statement in __ext4_get_inode_loc()")
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210910080316.70421-1-yi.zhang@huawei.com
When ext4_htree_fill_tree() fails, ext4_dx_readdir() can run into an
infinite loop since if info->last_pos != ctx->pos this will reset the
directory scan and reread the failing entry. For example:
1. a dx_dir which has 3 block, block 0 as dx_root block, block 1/2 as
leaf block which own the ext4_dir_entry_2
2. block 1 read ok and call_filldir which will fill the dirent and update
the ctx->pos
3. block 2 read fail, but we has already fill some dirent, so we will
return back to userspace will a positive return val(see ksys_getdents64)
4. the second ext4_dx_readdir will reset the world since info->last_pos
!= ctx->pos, and will also init the curr_hash which pos to block 1
5. So we will read block1 too, and once block2 still read fail, we can
only fill one dirent because the hash of the entry in block1(besides
the last one) won't greater than curr_hash
6. this time, we forget update last_pos too since the read for block2
will fail, and since we has got the one entry, ksys_getdents64 can
return success
7. Latter we will trapped in a loop with step 4~6
Cc: stable@kernel.org
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210914111415.3921954-1-yangerkun@huawei.com
The error path in ext4_fill_super forget to flush s_error_work before
journal destroy, and it may trigger the follow bug since
flush_stashed_error_work can run concurrently with journal destroy
without any protection for sbi->s_journal.
[32031.740193] EXT4-fs (loop66): get root inode failed
[32031.740484] EXT4-fs (loop66): mount failed
[32031.759805] ------------[ cut here ]------------
[32031.759807] kernel BUG at fs/jbd2/transaction.c:373!
[32031.760075] invalid opcode: 0000 [#1] SMP PTI
[32031.760336] CPU: 5 PID: 1029268 Comm: kworker/5:1 Kdump: loaded
4.18.0
[32031.765112] Call Trace:
[32031.765375] ? __switch_to_asm+0x35/0x70
[32031.765635] ? __switch_to_asm+0x41/0x70
[32031.765893] ? __switch_to_asm+0x35/0x70
[32031.766148] ? __switch_to_asm+0x41/0x70
[32031.766405] ? _cond_resched+0x15/0x40
[32031.766665] jbd2__journal_start+0xf1/0x1f0 [jbd2]
[32031.766934] jbd2_journal_start+0x19/0x20 [jbd2]
[32031.767218] flush_stashed_error_work+0x30/0x90 [ext4]
[32031.767487] process_one_work+0x195/0x390
[32031.767747] worker_thread+0x30/0x390
[32031.768007] ? process_one_work+0x390/0x390
[32031.768265] kthread+0x10d/0x130
[32031.768521] ? kthread_flush_work_fn+0x10/0x10
[32031.768778] ret_from_fork+0x35/0x40
static int start_this_handle(...)
BUG_ON(journal->j_flags & JBD2_UNMOUNT); <---- Trigger this
Besides, after we enable fast commit, ext4_fc_replay can add work to
s_error_work but return success, so the latter journal destroy in
ext4_load_journal can trigger this problem too.
Fix this problem with two steps:
1. Call ext4_commit_super directly in ext4_handle_error for the case
that called from ext4_fc_replay
2. Since it's hard to pair the init and flush for s_error_work, we'd
better add a extras flush_work before journal destroy in
ext4_fill_super
Besides, this patch will call ext4_commit_super in ext4_handle_error for
any nojournal case too. But it seems safe since the reason we call
schedule_work was that we should save error info to sb through journal
if available. Conversely, for the nojournal case, it seems useless delay
commit superblock to s_error_work.
Fixes: c92dc85684 ("ext4: defer saving error info from atomic context")
Fixes: 2d01ddc866 ("ext4: save error info to sb through journal if available")
Cc: stable@kernel.org
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210924093917.1953239-1-yangerkun@huawei.com
We should use unsigned long long rather than loff_t to avoid
overflow in ext4_max_bitmap_size() for comparison before returning.
w/o this patch sbi->s_bitmap_maxbytes was becoming a negative
value due to overflow of upper_limit (with has_huge_files as true)
Below is a quick test to trigger it on a 64KB pagesize system.
sudo mkfs.ext4 -b 65536 -O ^has_extents,^64bit /dev/loop2
sudo mount /dev/loop2 /mnt
sudo echo "hello" > /mnt/hello -> This will error out with
"echo: write error: File too large"
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/594f409e2c543e90fd836b78188dfa5c575065ba.1622867594.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When ext4_insert_delayed block receives and recovers from an error from
ext4_es_insert_delayed_block(), e.g., ENOMEM, it does not release the
space it has reserved for that block insertion as it should. One effect
of this bug is that s_dirtyclusters_counter is not decremented and
remains incorrectly elevated until the file system has been unmounted.
This can result in premature ENOSPC returns and apparent loss of free
space.
Another effect of this bug is that
/sys/fs/ext4/<dev>/delayed_allocation_blocks can remain non-zero even
after syncfs has been executed on the filesystem.
Besides, add check for s_dirtyclusters_counter when inode is going to be
evicted and freed. s_dirtyclusters_counter can still keep non-zero until
inode is written back in .evict_inode(), and thus the check is delayed
to .destroy_inode().
Fixes: 51865fda28 ("ext4: let ext4 maintain extent status tree")
Cc: stable@kernel.org
Suggested-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210823061358.84473-1-jefflexu@linux.alibaba.com
Now EXT4_FC_TAG_ADD_RANGE uses ext4_extent to track the
newly-added blocks, but the limit on the max value of
ee_len field is ignored, and it can lead to BUG_ON as
shown below when running command "fallocate -l 128M file"
on a fast_commit-enabled fs:
kernel BUG at fs/ext4/ext4_extents.h:199!
invalid opcode: 0000 [#1] SMP PTI
CPU: 3 PID: 624 Comm: fallocate Not tainted 5.14.0-rc6+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:ext4_fc_write_inode_data+0x1f3/0x200
Call Trace:
? ext4_fc_write_inode+0xf2/0x150
ext4_fc_commit+0x93b/0xa00
? ext4_fallocate+0x1ad/0x10d0
ext4_sync_file+0x157/0x340
? ext4_sync_file+0x157/0x340
vfs_fsync_range+0x49/0x80
do_fsync+0x3d/0x70
__x64_sys_fsync+0x14/0x20
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Simply fixing it by limiting the number of blocks
in one EXT4_FC_TAG_ADD_RANGE TLV.
Fixes: aa75f4d3da ("ext4: main fast-commit commit path")
Cc: stable@kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210820044505.474318-1-houtao1@huawei.com
The kmalloc() does not have a NULL check. This code can be re-written
slightly cleaner to just use the kstrdup().
Fixes: 265fd1991c ("ksmbd: use LOOKUP_BENEATH to prevent the out of share access")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RFC3530 notes that the 'dircount' field may be zero, in which case the
recommendation is to ignore it, and only enforce the 'maxcount' field.
In RFC5661, this recommendation to ignore a zero valued field becomes a
requirement.
Fixes: aee3776441 ("nfsd4: fix rd_dircount enforcement")
Cc: <stable@vger.kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>