Introduce a timeout to dspio_clear_response_queue() so that it won't
be caught in an endless loop even if the hardware doesn't respond
properly.
Fixes: a73d511c48 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We need to keep power on while processing the DSP response via unsol
event. Each snd_hda_codec_read() call does the power management, so
it should work normally, but still it's safer to keep the power up for
the whole function.
Fixes: a73d511c48 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The unsolicited event handler for the headphone jack on CA0132 codec
driver tries to reschedule the another delayed work with
cancel_delayed_work_sync(). It's no good idea, unfortunately,
especially after we changed the work queue to the standard global
one; this may lead to a stall because both works are using the same
global queue.
Fix it by dropping the _sync but does call cancel_delayed_work()
instead.
Fixes: 993884f6a2 ("ALSA: hda/ca0132 - Delay HP amp turnon.")
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1155836
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191105134316.19294-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a new PCI subsys ID for the SBZ, as found and tested by
me and some reddit users.
Link: https://lore.kernel.org/lkml/20190819204008.14426-1-p.rekowski@gmail.com
Signed-off-by: Paweł Rekowski <p.rekowski@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.
- Lots more work on moving towards a component based framework from
Morimoto-san.
- Support for force disconnecting muxes from Jerome Brunet.
- New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
CX2072X, Realtek RT1011 and RT1308.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl0jGwUTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0LD4B/9AkutfS+vznOrk0V0wFb2SUfjwE4Pr
+z/kAehohAOl/7pg9Dun/lmZYBWMyOM2aYmK81ahEo2DfO+uzwkwjCaXFjGVGwEK
j7XpWkrIjKnou/z1FeALgVvt+crzdy5iNWC04AbKaP2WHCcI7zvPQIsBta/V0OJt
lg+j0J7pagnTMcgV1+qJdaASmofy/hpoZ79Gv0PIfGC8hpJ/3mBgcNPCLQrJtD4R
v+tzvCZNrZVqCanwLf3vouEm1bpWYOpI+Wdmu4u6rY7MhmCj72EJ2zyfdm/qtaxF
e7whgCyOQFkWe7NgDn0G08aAT6LsaxOtPNr7H8tL8S8sw8425fqeOouV
=n/HQ
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.3
This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.
- Lots more work on moving towards a component based framework from
Morimoto-san.
- Support for force disconnecting muxes from Jerome Brunet.
- New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
CX2072X, Realtek RT1011 and RT1308.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The variable 'changed' is being initialized with a value that is never
read and it is being updated later with a new value. The initialization
is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Based on 1 normalized pattern(s):
this driver is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this driver is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 18 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.186505395@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ca0132 codec driver loads the firmware selectively depending on the
model in addition to the fallback of the default firmware. The code
works good, but a minor problem is that the current code seems
confusing for Clang where it spews a warning about uninitialized
variable.
This patch simplifies the code flow for such a false-positive
warning. After this refactoring, the ca0132_spec.alt_firmware_present
field is no longer used, hence it's eliminated as well.
Reported-and-tested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A call of pci_iounmap() call without CONFIG_PCI leads to a build error
on some architectures. We tried to address this and add a check of
IS_ENABLED(CONFIG_PCI), but this still doesn't seem enough for sh.
Ideally we should fix it globally, it's really a corner case, so let's
paper over it with a simpler ifdef.
Fixes: 1e73359a24 ("ALSA: hda/ca0132 - make pci_iounmap() call conditional")
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When building without CONFIG_PCI, we can (depending on the architecture)
get a link failure:
ERROR: "pci_iounmap" [sound/pci/hda/snd-hda-codec-ca0132.ko] undefined!
Adding a compile-time check for PCI gets it to work correctly on
32-bit ARM.
Fixes: d99501b857 ("ALSA: hda/ca0132 - Call pci_iounmap() instead of iounmap()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes the pincfg assignment for the AE-5, which was
previously using the Recon3D pincfg's by mistake.
Fixes: d06feaf02f ("ALSA: hda/ca0132 - Add pincfg for AE-5")
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a new PCI subsys ID for the ZxR, as found and tested by
other users. Without a way to know if any Z's use it as well, it keeps
the quirk of QUIRK_SBZ and goes through the HDA subsys test function.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We need to call pci_iounmap() instead of iounmap() for the regions
obtained via pci_iomap() call for some archs that need special
treatment.
Fixes: aa31704fd8 ("ALSA: hda/ca0132: Add PCI region2 iomap for SBZ")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All the recent support of Creative boards and onboard audio depend on
PCI, but they can't be trimmed easily even if you build without
CONFIG_PCI, since the quirk is detected dynamically and the code has
many branches with the flag check like spec->quirk type or
spec->use_alt_functions.
This patch makes these checks static for CONFIG_PCI=n case so that the
compiler optimizes out. The access to flags are replaced with macros
that are replaced with a static value for CONFIG_PCI=n.
The macros look slightly ugly for avoiding compiler warnings wrt
unused variables, and some additional default-case handlings for
another compiler warnings, but the rest are very straightforward
changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As ever there's a lot of small and driver specific changes going on
here, but we do also have some relatively large changes in the core
thanks to the hard work of Charles and Morimoto-san:
- More component transitions from Morimoto-san, I think we're about
finished with this. Thanks for all the hard work!
- Morimoto-san also added a bunch of for_each_foo macros
- A bunch of cleanups and fixes for DAPM from Charles.
- MCLK support for several different devices, including CS42L51, STM32
SAI, and MAX98373.
- Support for Allwinner A64 CODEC analog, Intel boards with DA7219 and
MAX98927, Meson AXG PDM inputs, Nuvoton NAU8822, Renesas R8A7744 and
TI PCM3060.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlvNuPoTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0CsxB/91P2RgcUhBSkPO3jsFSerc+RccqD8j
XogqjC62V2T3xqVUYtqqLf0dZFKUPFNoFitN2XdNU36H55DVI+3wxxmwObc64RIc
uB6ptQuwFz7vGeF6r6GWFUAZ7MB518dq/oZYRKrjAW49Lt2YiCD0HJ2gi+0Hm66A
53I7SLH3Q386UHDd+dl7+9BN7gPt0OIKAdsc/Vq7BDYvP+cNEm+YYjXGwaHjLLEC
o8vmj8Ny6x0dytdYuQ/XuekBhGopcfqTbWTpTu43/jCd5rumQXQY2g9CC1eRMlEJ
cm1hOjAErmKkkg2S84B1cMAvK23Szu36sPyeCphSQWOhlL4CFPVyJqic
=9A07
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.0/v4.20
As ever there's a lot of small and driver specific changes going on
here, but we do also have some relatively large changes in the core
thanks to the hard work of Charles and Morimoto-san:
- More component transitions from Morimoto-san, I think we're about
finished with this. Thanks for all the hard work!
- Morimoto-san also added a bunch of for_each_foo macros
- A bunch of cleanups and fixes for DAPM from Charles.
- MCLK support for several different devices, including CS42L51, STM32
SAI, and MAX98373.
- Support for Allwinner A64 CODEC analog, Intel boards with DA7219 and
MAX98927, Meson AXG PDM inputs, Nuvoton NAU8822, Renesas R8A7744 and
TI PCM3060.
This patch fixes the microphone issue for all cards. The previous fix
worked on the ZxR, but not on the AE-5 or Z. This patch has been tested
to work for all cards.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch removes the echo cancellation control for desktop cards, and
makes use of the special 0x47 SCP command for noise reduction.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch cleans up the patch_ca0132() function with suggestions from
Takashi Sakamoto.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes microphone inconsistency issues by adding a delay to
each setup_defaults function. Without this, the microphone only works
intermittently.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a control for 600 ohm gain on the Sound Blaster ZxR.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch removes the input select control for the ZxR, as it only has
one input option, rear microphone.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds commands for selecting input and output on the Sound
Blaster ZxR. The ZxR has no front panel header, and has line-in on the
separate daughter board, so it only does rear-mic.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds commands for setting up the ZxR after the DSP is
downloaded. The ZxR already shares most of the post-download commands
from the regular Sound Blaster Z.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds separate hda_codec_ops for the DBPro daughter board, as
it behaves more like a generic HDA codec than the other ca0132 cards,
despite having a ca0132 on board.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a pincfg for the ZxR, and defines which pins are used
for both.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds quirk ID's for the ZxR and it's daughter board, the
DBPro. It also adds a function for determining the quirk for each board
through HDA subsytem ID's instead of PCI subsystem ID's.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes an issue where if surround sound was the selected
output and output effects were enabled, the sound wasn't sent to all
channels correctly.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch corrects the control type of the additional AE-5 controls
added in a previous patch from HDA_INPUT to HDA_OUTPUT.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds controls for the AE-5's headphone gain setting, and the
DAC's interpolation filter setting.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the input selection commands for the Sound BlasterX
AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch cleans up ca0132_alt_out_select by moving the card specific
output commands into a separate function. As more cards are added, the
function ca0132_alt_out_select is going to get more bloated with these,
so moving into a separate function tries to keep that from happening.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch cleans up some of the formatting of the post-dsp load setup
functions, and also merges some of the sub functions into individual
ones.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Recon3D, AE-5, Z and ZxR all share the same firmware file. Rename
this from the specific "ctefx-sbz.bin" to "ctefx-desktop.bin" and set
the AE-5 and Recon3D to use it as well.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds AE-5 specific stuff to the ca0132_alt_init function.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds AE-5 pre-init functions that happen before the main
ca0132_alt_init, and gives functions related to the ca0113 a ca0113
prefix instead of ca0132. It also adds functions to write to the 8051's
SFRs, and to write the special ca0113 commands for the AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the unique writes for the AE-5 on startup to
ca0132_mmio_init. The other cards share some addresses written to, but
use different values.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch sets the bool values for the AE-5, as well as selects the
mixer it will use.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the pincfg for the Sound BlasterX AE-5, and cleans up
the function it's assigned in.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the PCI subsys ID quirk for the Sound BlasterX AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch defines some new verbs found from reverse engineering of the
onboard 8051 CPU, and a control param found there as well. This clears
up usage of these verbs in other parts of the driver, and removes their
usage where they're now known to be unnecessary.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Include asm/io.h directly so we've got a definition of pci_iomap(), the
current set of includes do this implicitly on most architectures but not
on SH.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As suggested by Takashi, move this header file to make it easier
to include from e.g. the Intel Skylake driver in follow-up patches
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As suggested by Takashi, move this header file to make it easier
to include from e.g. the Intel Skylake driver in follow-up patches
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds exit functions for the Recon3D, and cleans up the
current exit function.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds commands to the alternative input and output select
commands to support the Recon3D.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Recon3D can use many of the same functions as the Recon3Di, so many
of the r3di prefix function remain the same, but change their names to
the more generic r3d prefix. This patch does this, and adds quirk checks
for things specific to the Recon3Di.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds functions for Recon3D startup, and sets values for
things such as use_pci_mmio. It also renames some functions and tables
from the sbz prefix into ca0132, as the Recon3D uses them as well.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the ability to choose whether or not to map the pci
region2, which is used for things such as GPIO on the Recon3D and Sound
Blaster Z.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds pin configs from the Recon3D, taken from the Window's
driver.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the PCI subsys ID for the Recon3D that has been tested,
and adds the QUIRK_R3D enumeration.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes a previous oversight where the microphone unsolicited
response would use the wrong input selection function.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch cleans up ca0132_init by removing unnecessary commands and
ordering things better.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a new function, ca0132_mmio_gpio_set, to clear up what
is going on with writes to mmio region 0x320.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use NULL for initializing the snd_kcontrol_new.tlv field, instead of
0, as warned by sparse:
sound/pci/hda/patch_ca0132.c:5519:22: warning: Using plain integer as NULL pointer
Also, the driver does the same initialization twice, once for
knew.tlv.c and another for knew.tlv.p while both point to the same
address (these are union). Drop the latter superfluous one.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCI subsystem in question for this quirk rule has been
identified as a Gigabyte GA-Z170X-Gaming 7 motherboard. Set the
device name appropriately.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Reviewed-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These motherboards have Sound Core3D and apparently "support"
Recon3Di. Added to the quirk list as QUIRK_R3DI.
Issue report, PCI Subsystem ID, and testing by a contributor on
IRC who wished to remain anonymous.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Reviewed-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The array ca0132_alt_chmaps is local to the source and does not
need to be in global scope, so make it static.
Cleans up sparse warning:
warning: symbol 'ca0132_alt_chmaps' was not declared. Should it be
static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commentary says to use various parameters, and lays out what
the mapping is... The code used a 32KHz rate when the comment
says that it needs to use a 48KHz rate. And this has been the
case since day one.
On the Alienware M17x R4, the DMic used to have exceptionally quiet
pickup and a lot of noise. Changing the data rate fixes both of
these issues.
Searching the kernel bug tracker for ca0132-related issues shows no
mention of this being an issue for other hardware, and I have no
other hardware to test with, so a quirk is used to limit the effect
to just the M17x R4.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 009b8f979b conditionalized
adding the "CA0132 Analog Mic-In2" PCM with a comment to the
effect that, "desktops don't use this ADC", but the test was set
up such that the ADC was only created for desktops. Invert the
test.
Fixes: 009b8f979b ("ALSA: hda/ca0132: update core functions for sbz + r3di")
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
QUIRK_NONE is, quite explicitly, the default case. The entire
point of a quirks system is to allow "programming by difference"
from a given base case, which requires that merely defining a new
quirk for some piece of hardware should not change the behavior of
the driver for that hardware. In turn, this means that testing
for QUIRK_NONE explicitly is a violation of that implicit contract.
Change a test for QUIRK_NONE and QUIRK_ALIENWARE to default, and
add a test for QUIRK_SBZ to disable the default behavior in that
instance.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit e93ac30a32 (ALSA: HDA/ca0132:
add extra init functions for r3di + sbz) introduced an extra
initialization function that was improperly guarded, taking effect
on systems with QUIRK_ALIENWARE, even though such systems were
supposedly not affected.
It may be that this piece of initialization should be done for all
systems, but that's not a call that I can make.
Fixes: e93ac30a32 ("ALSA: HDA/ca0132: add extra init functions for r3di + sbz")
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
During ca0132_init(), ca0132_init_unsol() is run before the
spec->spec_init_verbs are written. ca0132_init_unsol() calls
snd_hda_jack_detect_enable_callback(), which requests UNSOL events
for three or four nodes, two of which were also (redundantly)
requested by spec_init_verbs.
Kill the redundant AC_VERB_SET_UNSOLICITED_ENABLE verbs.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ca0132_config() was setting some values in the auto_pin_cfg for
the codec... but it is called prior to snd_hda_parse_pin_defcfg(),
which does a memset() to clear the entire structure as one of its
first actions, making the entire exercise pointless.
Kill all use of struct auto_pin_cfg from ca0132_config().
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This module has a table for parameters of each effects. This table is
read-only and can have 'const' qualifier.
This commit adds this optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This module has some function-local strings just for printk therefore
it can be merged into format string.
This commit applies this optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This module has some strings just for printk therefore they can be
read-only.
This commit applies this optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
An array of templates for control element set is passed as an
argument for snd_hda_add_new_ctls(). This argument has 'const'
qualifier therefore the passed array can have the qualifier.
This commit adds this optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
sound/pci/hda/patch_ca0132.c:5062:50-51: WARNING: Use ARRAY_SIZE
sound/pci/hda/patch_ca0132.c:5092:50-51: WARNING: Use ARRAY_SIZE
Use ARRAY_SIZE instead of dividing sizeof array with sizeof an element
Semantic patch information:
This makes an effort to find cases where ARRAY_SIZE can be used such as
where there is a division of sizeof the array by the sizeof its first
element or by any indexed element or the element type. It replaces the
division of the two sizeofs by ARRAY_SIZE.
Generated by: scripts/coccinelle/misc/array_size.cocci
Fixes: 47cdf76e44 ("ALSA: hda/ca0132: Add new control changes for SBZ + R3Di")
CC: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds new controls to set the effect levels on the R3Di and
SBZ. It also adds vmaster controls to control all surround sound
channels. So that Surround effect switch doesn't conflict with Surround
volume, FX: prefix added to all effect related switches.
Tested-by: Mariusz Ceier <mceier+kernel@gmail.com>
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add function to set vipsource on cards that use_alt_controls. Different
sequence. Also, add cvoice_switch_set at end of ca0132_select_in so that
when switching between inputs cvoice state is maintained.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds lookup table for floating point decibel volume, and new functions
to allow for setting the decibel level on the DSP.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the ability to change the src_id on scp commands, which
is used in the dsp setup of the Recon3Di and the Sound Blaster Z. It
also makes sure to maintain backwards compatibility with the older
dspio_set_uint_param function, and sets it's src to the default 0x20.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds dsp setup functions for Recon3Di as well as the GPIO functions
specific to it.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add dsp setup related functions for the Sound Blaster Z, along with
other helper functions.
Also, add sbz_dsp_startup_check, which fixes a bug where the card
sometimes starts up and has no sound.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch updates core functions to accommodate the Sound Blaster Z and
Recon3Di by changing which functions they use. It also adds the ability
to enable/disable streams.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds extra init functions for the Sound Blaster Z and
Recon3Di. It also adds more checks to make sure that the DSP isn't
downloaded twice on startup, by checking if the dsp_state is already set
to DSP_DOWNLOADED. It also adds the ability to re-download the DSP on a
resume.
It also changes the init verbs table to apply to all codecs, and takes
the two specific end verbs and puts them into a separate function in
ca0132_init instead.
GPIO functions are also added.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds extra functions for shutdown on the Sound Blaster Z and
Recon3Di. The Recon3Di only has one specific functions, which sets the
GPIO data pins to 0 to prevent a popping noise.
The Sound Blaster Z exit sequence was taken from Windows. Without this
exit function, the card will not reload properly unless the PC has been
shutdown to clear the onboard memory. There are commented out functions
currently in the sbz_exit_chip function that are added in a later patch.
Also, a reboot notify function has been added, to make sure these
functions are ran before a reboot. This helps when using the card
through VFIO in a virtual machine, to make sure the card reloads the DSP
properly.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds iomapping for the region2 section of memory on the SBZ.
This memory region is used in later patches for setting inputs and
outputs. If the mapping fails, the quirk is changed back to QUIRK_NONE
to avoid attempts to write to uninitialized memory.
It also adds a new exit sequence to unmap the iomem for the SBZ.
[ Reordered linux/*.h inclusion in the patch by tiwai ]
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds an unsolicited response tag for the front headphone
panel which uses the same hp_callback as the rear headphone detection.
This patch also adds pincfgs for the R3Di and SBZ which were taken from
the Windows driver. The pins are also defined in the function
ca0132_config. Both the R3Di and SBZ are also given a max out channel
value of 6 to handle 5.1 surround sound in later patches.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds PCI quirk ID's for the Sound Blaster Z and Recon3Di.
Only the currently tested ID's have been added.
This patch also adds the ability to load alternative firmwares for each
card, the firmwares can be obtained from within the Windows driver.
The Recon3Di uses "ctefx-r3di.bin" and the Sound Blaster Z uses
"ctefx-sbz.bin". If the alternative firmware for the given quirk is not
found, the original ctefx.bin will be used. This has been confirmed to
work for both the R3Di and the SBZ.
This patch also makes the character array *dirstr a const.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
DECLARE_TLV_DB_SCALE (alias of SNDRV_CTL_TLVD_DECLARE_DB_SCALE) is used but
tlv.h is not included. This causes build failure when local macro is
defined by comment-out.
This commit fixes the bug. At the same time, the alias macro is replaced
with a destination macro added at a commit 46e860f768 ("ALSA: rename
TLV-related macros so that they're friendly to user applications")
Reported-by: Connor McAdams <conmanx360@gmail.com>
Fixes: 44f0c9782c ('ALSA: hda/ca0132: Add tuning controls')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Using the ARRAY_SIZE macro improves the readability of the code.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The CA0132 codec driver doesn't call the free function at its error
path of the probe, which leaves the allocated memory. Call
ca0132_free() properly at the error handling.
Fixes: a73d511c48 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With the previous unsigned long value clang generates warnings like
this:
sound/pci/hda/patch_ca0132.c:860:37: error: implicit conversion from
'unsigned long' to 'u32' (aka 'unsigned int') changes value from
18446744073709551615 to 4294967295 [-Werror,-Wconstant-conversion]
spec->curr_chip_addx = (res < 0) ? ~0UL : chip_addx;
~ ^~~~
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The extra pairs of parantheses are not needed and causes clang to
generate warnings like this:
sound/pci/hda/patch_ca0132.c:1171:14: error: equality comparison with extraneous parentheses [-Werror,-Wparentheses-equality]
if ((buffer == NULL))
~~~~~~~^~~~~~~
sound/pci/hda/patch_ca0132.c:1171:14: note: remove extraneous parentheses around the comparison to silence this warning
if ((buffer == NULL))
~ ^ ~
sound/pci/hda/patch_ca0132.c:1171:14: note: use '=' to turn this equality comparison into an assignment
if ((buffer == NULL))
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix typos and add the following to the scripts/spelling.txt:
followings||following
While we are here, add a missing colon in the boilerplate in DT binding
documents. The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as
well.
I reworded "as the followings:" to "as follows:" for
drivers/usb/gadget/udc/renesas_usb3.c.
Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc-7 caught what it considers a NULL pointer dereference:
sound/pci/hda/patch_ca0132.c: In function 'dspio_scp.constprop':
sound/pci/hda/patch_ca0132.c:1487:4: error: argument 1 null where non-null expected [-Werror=nonnull]
This is plausible from looking at the function, as we compare 'reply'
to NULL earlier in it. I have not tried to analyze if there are constraints
that make it impossible to hit the bug, but adding another NULL check in
the end kills the warning and makes the function more robust.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
I'm using an Alienware 15 R2 and had to use the alienware quirks to
get my headphone output working.
I fixed it by adding, SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2
2016", QUIRK_ALIENWARE) to the patch.
Signed-off-by: Sven Hahne <hahne@zeitkunst.eu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For structure types defined in the same file or local header files, find
top-level static structure declarations that have the following
properties:
1. Never reassigned.
2. Address never taken
3. Not passed to a top-level macro call
4. No pointer or array-typed field passed to a function or stored in a
variable.
Declare structures having all of these properties as const.
Done using Coccinelle.
Based on a suggestion by Joe Perches <joe@perches.com>.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
