* kvm-arm64/pkvm-fixed-features-prologue:
: Rework a bunch of common infrastructure as a prologue
: to Fuad Tabba's protected VM fixed feature series.
KVM: arm64: Upgrade trace_kvm_arm_set_dreg32() to 64bit
KVM: arm64: Add config register bit definitions
KVM: arm64: Add feature register flag definitions
KVM: arm64: Track value of cptr_el2 in struct kvm_vcpu_arch
KVM: arm64: Keep mdcr_el2's value as set by __init_el2_debug
KVM: arm64: Restore mdcr_el2 from vcpu
KVM: arm64: Refactor sys_regs.h,c for nVHE reuse
KVM: arm64: Fix names of config register fields
KVM: arm64: MDCR_EL2 is a 64-bit register
KVM: arm64: Remove trailing whitespace in comment
KVM: arm64: placeholder to check if VM is protected
Signed-off-by: Marc Zyngier <maz@kernel.org>
Switch KVM/arm64 to the generic entry code, courtesy of Oliver Upton
* kvm-arm64/generic-entry:
KVM: arm64: Use generic KVM xfer to guest work function
entry: KVM: Allow use of generic KVM entry w/o full generic support
KVM: arm64: Record number of signal exits as a vCPU stat
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/misc-5.15:
: Misc improvements for 5.15:
:
: - Account the number of VMID-wide TLB invalidations as
: remote TLB flushes
: - Fix comments in the VGIC code
: - Cleanup the PMU IMPDEF identification
: - Streamline the TGRAN2 usage
: - Avoid advertising a 52bit IPA range for non-64KB configs
: - Avoid spurious signalling when a HW-mapped interrupt is in the
: A+P state on entry, and in the P state on exit, but that the
: physical line is not pending anymore.
: - Bunch of minor cleanups
KVM: arm64: vgic: Resample HW pending state on deactivation
KVM: arm64: vgic: Drop WARN from vgic_get_irq
KVM: arm64: Drop unused REQUIRES_VIRT
KVM: arm64: Drop check_kvm_target_cpu() based percpu probe
KVM: arm64: Drop init_common_resources()
KVM: arm64: Use ARM64_MIN_PARANGE_BITS as the minimum supported IPA
arm64/mm: Add remaining ID_AA64MMFR0_PARANGE_ macros
KVM: arm64: Restrict IPA size to maximum 48 bits on 4K and 16K page size
arm64/mm: Define ID_AA64MMFR0_TGRAN_2_SHIFT
KVM: arm64: perf: Replace '0xf' instances with ID_AA64DFR0_PMUVER_IMP_DEF
KVM: arm64: Fix comments related to GICv2 PMR reporting
KVM: arm64: Count VMID-wide TLB invalidations
arm64/kexec: Test page size support with new TGRAN range values
Signed-off-by: Marc Zyngier <maz@kernel.org>
Track the baseline guest value for cptr_el2 in struct
kvm_vcpu_arch, similar to the other registers that control traps.
Use this value when setting cptr_el2 for the guest.
Currently this value is unchanged (CPTR_EL2_DEFAULT), but future
patches will set trapping bits based on features supported for
the guest.
No functional change intended.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210817081134.2918285-9-tabba@google.com
On deactivating traps, restore the value of mdcr_el2 from the
newly created and preserved host value vcpu context, rather than
directly reading the hardware register.
Up until and including this patch the two values are the same,
i.e., the hardware register and the vcpu one. A future patch will
be changing the value of mdcr_el2 on activating traps, and this
ensures that its value will be restored.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210817081134.2918285-7-tabba@google.com
We keep an entry for the PMSWINC_EL0 register in the vcpu structure,
while *never* writing anything there outside of reset.
Given that the register is defined as write-only, that we always
trap when this register is accessed, there is little point in saving
anything anyway.
Get rid of the entry, and save a mighty 8 bytes per vcpu structure.
We still need to keep it exposed to userspace in order to preserve
backward compatibility with previously saved VMs. Since userspace
cannot expect any effect of writing to PMSWINC_EL0, treat the
register as RAZ/WI for the purpose of userspace access.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210719123902.1493805-5-maz@kernel.org
KVM/arm64 updates for v5.14.
- Add MTE support in guests, complete with tag save/restore interface
- Reduce the impact of CMOs by moving them in the page-table code
- Allow device block mappings at stage-2
- Reduce the footprint of the vmemmap in protected mode
- Support the vGIC on dumb systems such as the Apple M1
- Add selftest infrastructure to support multiple configuration
and apply that to PMU/non-PMU setups
- Add selftests for the debug architecture
- The usual crop of PMU fixes
Generic KVM stats are those collected in architecture independent code
or those supported by all architectures; put all generic statistics in
a separate structure. This ensures that they are defined the same way
in the statistics API which is being added, removing duplication among
different architectures in the declaration of the descriptors.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210618222709.1858088-2-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/arm64 support for MTE, courtesy of Steven Price.
It allows the guest to use memory tagging, and offers
a new userspace API to save/restore the tags.
* kvm-arm64/mmu/mte:
KVM: arm64: Document MTE capability and ioctl
KVM: arm64: Add ioctl to fetch/store tags in a guest
KVM: arm64: Expose KVM_ARM_CAP_MTE
KVM: arm64: Save/restore MTE registers
KVM: arm64: Introduce MTE VM feature
arm64: mte: Sync tags for pages where PTE is untagged
Signed-off-by: Marc Zyngier <maz@kernel.org>
The VMM may not wish to have it's own mapping of guest memory mapped
with PROT_MTE because this causes problems if the VMM has tag checking
enabled (the guest controls the tags in physical RAM and it's unlikely
the tags are correct for the VMM).
Instead add a new ioctl which allows the VMM to easily read/write the
tags from guest memory, allowing the VMM's mapping to be non-PROT_MTE
while the VMM can still read/write the tags for the purpose of
migration.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210621111716.37157-6-steven.price@arm.com
Add a new VM feature 'KVM_ARM_CAP_MTE' which enables memory tagging
for a VM. This will expose the feature to the guest and automatically
tag memory pages touched by the VM as PG_mte_tagged (and clear the tag
storage) to ensure that the guest cannot see stale tags, and so that
the tags are correctly saved/restored across swap.
Actually exposing the new capability to user space happens in a later
patch.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
[maz: move VM_SHARED sampling into the critical section]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210621111716.37157-3-steven.price@arm.com
KVM/arm64 updates for Linux 5.13
New features:
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
- Alexandru is now a reviewer (not really a new feature...)
Fixes:
- Proper emulation of the GICR_TYPER register
- Handle the complete set of relocation in the nVHE EL2 object
- Get rid of the oprofile dependency in the PMU code (and of the
oprofile body parts at the same time)
- Debug and SPE fixes
- Fix vcpu reset
Yank out the hva-based MMU notifier APIs now that all architectures that
use the notifiers have moved to the gfn-based APIs.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210402005658.3024832-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move arm64 to the gfn-base MMU notifier APIs, which do the hva->gfn
lookup in common code.
No meaningful functional change intended, though the exact order of
operations is slightly different since the memslot lookups occur before
calling into arch code.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210402005658.3024832-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the prototypes for the MMU notifier callbacks out of arch code and
into common code. There is no benefit to having each arch replicate the
prototypes since any deviation from the invocation in common code will
explode.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a VCPU is created, the kvm_vcpu struct is initialized to zero in
kvm_vm_ioctl_create_vcpu(). On VHE systems, the first time
vcpu.arch.mdcr_el2 is loaded on hardware is in vcpu_load(), before it is
set to a sensible value in kvm_arm_setup_debug() later in the run loop. The
result is that KVM executes for a short time with MDCR_EL2 set to zero.
This has several unintended consequences:
* Setting MDCR_EL2.HPMN to 0 is constrained unpredictable according to ARM
DDI 0487G.a, page D13-3820. The behavior specified by the architecture
in this case is for the PE to behave as if MDCR_EL2.HPMN is set to a
value less than or equal to PMCR_EL0.N, which means that an unknown
number of counters are now disabled by MDCR_EL2.HPME, which is zero.
* The host configuration for the other debug features controlled by
MDCR_EL2 is temporarily lost. This has been harmless so far, as Linux
doesn't use the other fields, but that might change in the future.
Let's avoid both issues by initializing the VCPU's mdcr_el2 field in
kvm_vcpu_vcpu_first_run_init(), thus making sure that the MDCR_EL2 register
has a consistent value after each vcpu_load().
Fixes: d5a21bcc29 ("KVM: arm64: Move common VHE/non-VHE trap config in separate functions")
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210407144857.199746-3-alexandru.elisei@arm.com
Now that the read_ctr macro has been specialised for nVHE,
the whole CPU_FTR_REG_HYP_COPY infrastrcture looks completely
overengineered.
Simplify it by populating the two u64 quantities (MMFR0 and 1)
that the hypervisor need.
Reviewed-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When memory protection is enabled, the EL2 code needs the ability to
create and manage its own page-table. To do so, introduce a new set of
hypercalls to bootstrap a memory management system at EL2.
This leads to the following boot flow in nVHE Protected mode:
1. the host allocates memory for the hypervisor very early on, using
the memblock API;
2. the host creates a set of stage 1 page-table for EL2, installs the
EL2 vectors, and issues the __pkvm_init hypercall;
3. during __pkvm_init, the hypervisor re-creates its stage 1 page-table
and stores it in the memory pool provided by the host;
4. the hypervisor then extends its stage 1 mappings to include a
vmemmap in the EL2 VA space, hence allowing to use the buddy
allocator introduced in a previous patch;
5. the hypervisor jumps back in the idmap page, switches from the
host-provided page-table to the new one, and wraps up its
initialization by enabling the new allocator, before returning to
the host.
6. the host can free the now unused page-table created for EL2, and
will now need to issue hypercalls to make changes to the EL2 stage 1
mappings instead of modifying them directly.
Note that for the sake of simplifying the review, this patch focuses on
the hypervisor side of things. In other words, this only implements the
new hypercalls, but does not make use of them from the host yet. The
host-side changes will follow in a subsequent patch.
Credits to Will for __pkvm_init_switch_pgd.
Acked-by: Will Deacon <will@kernel.org>
Co-authored-by: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-18-qperret@google.com
Introduce the infrastructure in KVM enabling to copy CPU feature
registers into EL2-owned data-structures, to allow reading sanitised
values directly at EL2 in nVHE.
Given that only a subset of these features are being read by the
hypervisor, the ones that need to be copied are to be listed under
<asm/kvm_cpufeature.h> together with the name of the nVHE variable that
will hold the copy. This introduces only the infrastructure enabling
this copy. The first users will follow shortly.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-14-qperret@google.com
kvm_call_hyp() has some logic to issue a function call or a hypercall
depending on the EL at which the kernel is running. However, all the
code compiled under __KVM_NVHE_HYPERVISOR__ is guaranteed to only run
at EL2 which allows us to simplify.
Add ifdefery to kvm_host.h to simplify kvm_call_hyp() in .hyp.text.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-9-qperret@google.com
Now that KVM is equipped to deal with SVE on nVHE, remove the code
preventing it from being used as well as the bits of documentation
that were mentioning the incompatibility.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Daniel Kiss <daniel.kiss@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The KVM code contains a number of "sve_vq_from_vl(vcpu->arch.sve_max_vl)"
instances, and we are about to add more.
Introduce vcpu_sve_vq() as a shorthand for this expression.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The vcpu_sve_pffr() returns a pointer, which can be an interesting
thing to do on nVHE. Wrap the pointer with kern_hyp_va(), and
take this opportunity to remove the unnecessary casts (sve_state
being a void *).
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM/arm64 updates for Linux 5.12
- Make the nVHE EL2 object relocatable, resulting in much more
maintainable code
- Handle concurrent translation faults hitting the same page
in a more elegant way
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Allow the disabling of symbol export from assembly code
- Simplification of the early init hypercall handling
Current KVM_USER_MEM_SLOTS limits are arch specific (512 on Power, 509 on x86,
32 on s390, 16 on MIPS) but they don't really need to be. Memory slots are
allocated dynamically in KVM when added so the only real limitation is
'id_to_index' array which is 'short'. We don't have any other
KVM_MEM_SLOTS_NUM/KVM_USER_MEM_SLOTS-sized statically defined structures.
Low KVM_USER_MEM_SLOTS can be a limiting factor for some configurations.
In particular, when QEMU tries to start a Windows guest with Hyper-V SynIC
enabled and e.g. 256 vCPUs the limit is hit as SynIC requires two pages per
vCPU and the guest is free to pick any GFN for each of them, this fragments
memslots as QEMU wants to have a separate memslot for each of these pages
(which are supposed to act as 'overlay' pages).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210127175731.2020089-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide a hypervisor implementation of the ARM architected TRNG firmware
interface described in ARM spec DEN0098. All function IDs are implemented,
including both 32-bit and 64-bit versions of the TRNG_RND service, which
is the centerpiece of the API.
The API is backed by the kernel's entropy pool only, to avoid guests
draining more precious direct entropy sources.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
[Andre: minor fixes, drop arch_get_random() usage]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210106103453.152275-6-andre.przywara@arm.com
Although there is nothing wrong with the current host PSCI relay
implementation, we can clean it up and remove some of the helpers
that do not improve the overall readability of the legacy PSCI 0.1
handling.
Opportunity is taken to turn the bitmap into a set of booleans,
and creative use of preprocessor macros make init and check
more concise/readable.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
PSCI driver exposes a struct containing the PSCI v0.1 function IDs
configured in the DT. However, the struct does not convey the
information whether these were set from DT or contain the default value
zero. This could be a problem for PSCI proxy in KVM protected mode.
Extend config passed to KVM with a bit mask with individual bits set
depending on whether the corresponding function pointer in psci_ops is
set, eg. set bit for PSCI_CPU_SUSPEND if psci_ops.cpu_suspend != NULL.
Previously config was split into multiple global variables. Put
everything into a single struct for convenience.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201208142452.87237-2-dbrazdil@google.com
Add an early parameter that allows users to select the mode of operation
for KVM/arm64.
For now, the only supported value is "protected". By passing this flag
users opt into the hypervisor placing additional restrictions on the
host kernel. These allow the hypervisor to spawn guests whose state is
kept private from the host. Restrictions will include stage-2 address
translation to prevent host from accessing guest memory, filtering its
SMC calls, etc.
Without this parameter, the default behaviour remains selecting VHE/nVHE
based on hardware support and CONFIG_ARM64_VHE.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201202184122.26046-2-dbrazdil@google.com
Cores that predate the introduction of ID_AA64PFR0_EL1.CSV3 to
the ARMv8 architecture have this field set to 0, even of some of
them are not affected by the vulnerability.
The kernel maintains a list of unaffected cores (A53, A55 and a few
others) so that it doesn't impose an expensive mitigation uncessarily.
As we do for CSV2, let's expose the CSV3 property to guests that run
on HW that is effectively not vulnerable. This can be reset to zero
by writing to the ID register from userspace, ensuring that VMs can
be migrated despite the new property being set.
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
