This patch adds a test case with an excessive number of call stack frames
in dead code.
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Tested-by: Xiao Han <xiao.han@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The BPF verifier checks the maximum number of call stack frames twice,
first in the main CFG traversal (do_check) and then in a subsequent
traversal (check_max_stack_depth). If the second check fails, it logs a
'verifier bug' warning and errors out, as the number of call stack frames
should have been verified already.
However, the second check may fail without indicating a verifier bug: if
the excessive function calls reside in dead code, the main CFG traversal
may not visit them; the subsequent traversal visits all instructions,
including dead code.
This case raises the question of how invalid dead code should be treated.
This patch implements the conservative option and rejects such code.
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Tested-by: Xiao Han <xiao.han@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When the conntrack is initialized, there is no helper attached
yet so the nat info initialization (nf_nat_setup_info) skips
adding the seqadj ext.
A helper is attached later when the conntrack is not confirmed
but is going to be committed. In this case, if NAT is needed then
adds the seqadj ext as well.
Fixes: 16ec3d4fbb ("openvswitch: Fix cached ct with helper.")
Signed-off-by: Flavio Leitner <fbl@sysclose.org>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running stacktrace_build_id_nmi, try to query
kernel.perf_event_max_sample_rate sysctl and use it as a sample_freq.
If there was an error reading sysctl, fallback to 5000.
kernel.perf_event_max_sample_rate sysctl can drift and/or can be
adjusted by the perf tool, so assuming a fixed number might be
problematic on a long running machine.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Renaming a netdev-trigger-tracked interface was resulting in an
unbalanced dev_hold().
Example:
> iw phy phy0 interface add foo type __ap
> echo netdev > trigger
> echo foo > device_name
> ip link set foo name bar
> iw dev bar del
[ 237.355366] unregister_netdevice: waiting for bar to become free. Usage count = 1
[ 247.435362] unregister_netdevice: waiting for bar to become free. Usage count = 1
[ 257.545366] unregister_netdevice: waiting for bar to become free. Usage count = 1
Above problem was caused by trigger checking a dev->name which obviously
changes after renaming an interface. It meant missing all further events
including the NETDEV_UNREGISTER which is required for calling dev_put().
This change fixes that by:
1) Comparing device struct *address* for notification-filtering purposes
2) Dropping unneeded NETDEV_CHANGENAME code (no behavior change)
Fixes: 06f502f57d ("leds: trigger: Introduce a NETDEV trigger")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Take advantage of the software Rx batching by using
netif_receive_skb_list instead of napi_gro_receive.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It might happen that Tx conf acknowledges a frame before it was
subscribed in bql, as subscribing was previously done after the enqueue
operation.
This patch moves the netdev_tx_sent_queue call before the actual frame
enqueue, so that this can never happen.
Fixes: 569dac6a5a ("dpaa2-eth: bql support")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
clang warns about possible bugs in a dead code branch after
BUG_ON(1) when CONFIG_PROFILE_ALL_BRANCHES is enabled:
drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: error: variable 'buf_size' is used uninitialized whenever 'if'
condition is false [-Werror,-Wsometimes-uninitialized]
BUG_ON(1);
^~~~~~~~~
include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON'
#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
^~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:48:23: note: expanded from macro 'unlikely'
# define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x)))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/sge.c:482:9: note: uninitialized use occurs here
return buf_size;
^~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: note: remove the 'if' if its condition is always true
BUG_ON(1);
^
include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON'
#define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
^
drivers/net/ethernet/chelsio/cxgb4/sge.c:459:14: note: initialize the variable 'buf_size' to silence this warning
int buf_size;
^
= 0
Use BUG() here to create simpler code that clang understands
correctly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the return value check which testing the wrong variable
in tipc_mcast_send_sync().
Fixes: c55c8edafa ("tipc: smooth change between replicast and broadcast")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit says:
====================
net: phy: aquantia: report Aquantia-specific settings and features
This series detects and reports quite some Aquantia-specific settings
and features.
v2:
- propagate timeout in patch 2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The AQCS109 supports a proprietary 2-pair 1Gbps mode. The standard
registers don't allow to tell between 1000BaseT and 1000BaseT2.
Add reporting this proprietary mode based on a vendor register.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add reporting firmware details. These details are available only once
the firmware has finished initializing the chip. This can take some
time and we need to poll for init completion.
v2:
- Propagate timeout in aqr107_wait_reset_complete(). Don't bail out
completely on timeout because chip may be functional even w/o
firmware image.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If both link partners are Aquantia PHY's then additional information is
exchanged as part of the auto-negotiation. Report remote capabilities
if link partner is Aquantia PHY.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When phylink_of_phy_connect fails, dsa_slave_phy_setup tries to save the
day by connecting to an alternative PHY, none other than a PHY on the
switch's internal MDIO bus, at an address equal to the port's index.
However this does not take into consideration the scenario when the
switch that failed to probe an external PHY does not have an internal
MDIO bus at all.
Fixes: aab9c4067d ("net: dsa: Plug in PHYLINK support")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We must not use legacy clock defines for dts clckctrl clocks as the offsets
will be wrong.
Fixes: 87fc89ced3 ("ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc")
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
In dumpit, unlike doit, the check for info_get op being defined
is missing. Add it and avoid null pointer dereference in case driver
does not define this op.
Fixes: f9cf22882c ("devlink: add device information API")
Reported-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously the green and amber LEDs on this quad PHY were solid, to
indicate an encoding of the link speed (10/100/1000).
This keeps the LEDs always on just as before, but now they flash on
Rx/Tx activity.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running a syz script, a panic occurred:
[ 156.088228] BUG: KASAN: use-after-free in tipc_disc_timeout+0x9c9/0xb20 [tipc]
[ 156.094315] Call Trace:
[ 156.094844] <IRQ>
[ 156.095306] dump_stack+0x7c/0xc0
[ 156.097346] print_address_description+0x65/0x22e
[ 156.100445] kasan_report.cold.3+0x37/0x7a
[ 156.102402] tipc_disc_timeout+0x9c9/0xb20 [tipc]
[ 156.106517] call_timer_fn+0x19a/0x610
[ 156.112749] run_timer_softirq+0xb51/0x1090
It was caused by the netns freed without deleting the discoverer timer,
while later on the netns would be accessed in the timer handler.
The timer should have been deleted by tipc_net_stop() when cleaning up a
netns. However, tipc has been able to enable a bearer and start d->timer
without the local node_addr set since Commit 52dfae5c85 ("tipc: obtain
node identity from interface by default"), which caused the timer not to
be deleted in tipc_net_stop() then.
So fix it in tipc_net_stop() by changing to check local node_id instead
of local node_addr, as Jon suggested.
While at it, remove the calling of tipc_nametbl_withdraw() there, since
tipc_nametbl_stop() will take of the nametbl's freeing after.
Fixes: 52dfae5c85 ("tipc: obtain node identity from interface by default")
Reported-by: syzbot+a25307ad099309f1c2b9@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New device of QNAP based on aqc111u
Add this ID to blacklist of cdc_ether driver as well
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements accessors for the QCA8337 MDIO access
through the MDIO_MASTER register, which makes it possible to
access the PHYs on slave-bus through the switch. In cases
where the switch ports are already mapped via external
"phy-phandles", the internal mdio-bus is disabled in order to
prevent a duplicated discovery and enumeration of the same
PHYs. Don't use mixed external and internal mdio-bus
configurations, as this is not supported by the hardware.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This belated patch implements Andrew Lunn's request of
"remove the phy_read() and phy_write() functions."
<https://lore.kernel.org/patchwork/comment/902734/>
While seemingly harmless, this causes the switch's user
port PHYs to get registered twice. This is because the
DSA subsystem will create a slave mdio-bus not knowing
that the qca8k_phy_(read|write) accessors operate on
the external mdio-bus. So the same "bus" gets effectively
duplicated.
Cc: stable@vger.kernel.org
Fixes: 6b93fb4648 ("net-next: dsa: add new driver for qca8xxx family")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch updates the qca8k's binding to document to the
approach for using the internal mdio-bus of the supported
qca8k switches.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the example, the phy at phy@0 is clashing with
the switch0@0 at the same address. Usually, the switches
are accessible through pseudo PHYs which in case of the
qca8k are located at 0x10 - 0x18.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- A fix to a double free in the histogram code
- Uninitialized variable fix
- Use NULL instead of zero fix and spelling fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXJodrhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6ql6tAQDo5lGABVUkW79Mb7KzkUMN5O5di7XE
ynn13mhJz19ZDgD/RZIXjY8rxUg0Tw0QsgvToAExlaURvLIV0cbF9C01EgA=
=zSic
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Three small fixes:
- A fix to a double free in the histogram code
- Uninitialized variable fix
- Use NULL instead of zero fix and spelling fixes"
* tag 'trace-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix warning using plain integer as NULL & spelling corrections
tracing: initialize variable in create_dyn_event()
tracing: Remove unnecessary var_ref destroy in track_data_destroy()
-----BEGIN PGP SIGNATURE-----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=aQ8F
-----END PGP SIGNATURE-----
Merge tag 'locks-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking bugfix from Jeff Layton:
"Just a single fix for a bug that crept into POSIX lock deadlock
detection in v5.0"
* tag 'locks-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
locks: wake any locks blocked on request before deadlock check
Jeff Kirsher says:
====================
100GbE Intel Wired LAN Driver Updates 2019-03-25
This series contains updates to the ice driver only.
Victor updates the ice driver to be able to update the VSI queue
configuration dynamically, by providing the ability to increase or
decrease the VSI's number of queues.
Michal fixes an issue when the VM starts or the VF driver is reloaded,
the VLAN switch rule was lost (i.e. not added), so ensure it gets added
in these cases.
Brett updates the driver to support link events over the admin receive
queue, instead of polling link events.
Maciej refactors the code a bit to introduce a new function to fetch the
receiver buffer and do the DMA synchronization to reduce the code
duplication. Also added ice_can_reuse_rx_page() to verify whether the
page can be reused so that in the future, we can use this check
elsewhere in the driver. Additional driver optimizations so that we can
drop the ice_pull_tail() altogether. Added support for bulk updates of
refcount instead of doing it one by one. Refactored the page counting
and buffer recycling so that we can use this code to clean up receive
buffers when there is no skb allocated, like XDP. Added
DMA_ATTR_WEAK_ORDERING and DMA_ATTR_SKIP_CPU_SYNC attributes to the DMA
API during the mapping operations on the receive side, so that nonx86
platforms will be able to sync with what is being used (2k buffers)
instead of the entire page.
Dave fixes the driver to perform the most intrusive of the resets
requested and clear the other request bits so that we do not end up with
repeated reset, after reset.
Bruce adds a iterator macro to clean up several for() loops.
Chinh modifies the packet flags to be more generic so that they can be
used for both receive and transmit.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On an Acer Predator Helios 500 (Ryzen version), the laptop's speakers
don't work out of the box.
The problem can be worked around with hdajackretask, remapping the
"Black Headphone, Right side" pin (0x21) to the Internal speaker.
This patch adds a quirk to change this mapping by default.
[ corrected ALC299_FIXUP_PREDATOR_SPK definition and adapted for the
latest tree by tiwai ]
Signed-off-by: Bernhard Rosenkraenzer <bero@lindev.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
XFS applies more strict serialization constraints to unaligned
direct writes to accommodate things like direct I/O layer zeroing,
unwritten extent conversion, etc. Unaligned submissions acquire the
exclusive iolock and wait for in-flight dio to complete to ensure
multiple submissions do not race on the same block and cause data
corruption.
This generally works in the case of an aligned dio followed by an
unaligned dio, but the serialization is lost if I/Os occur in the
opposite order. If an unaligned write is submitted first and
immediately followed by an overlapping, aligned write, the latter
submits without the typical unaligned serialization barriers because
there is no indication of an unaligned dio still in-flight. This can
lead to unpredictable results.
To provide proper unaligned dio serialization, require that such
direct writes are always the only dio allowed in-flight at one time
for a particular inode. We already acquire the exclusive iolock and
drain pending dio before submitting the unaligned dio. Wait once
more after the dio submission to hold the iolock across the I/O and
prevent further submissions until the unaligned I/O completes. This
is heavy handed, but consistent with the current pre-submission
serialization for unaligned direct writes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Commit
bf904d2762 ("x86/pti/64: Remove the SYSCALL64 entry trampoline")
removed the sole usage of kclist_add_remap() but it did not remove the
left-over definition from the include file.
Fix the same.
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Anderson <anderson@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Kairui Song <kasong@redhat.com>
Cc: kexec@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Omar Sandoval <osandov@fb.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/1553583028-17804-1-git-send-email-bhsharma@redhat.com
To enable S24_LE format, sample_type in topology fw has to be set to 1.
But sample_type defined in topology firmware configuration is not
getting reflected in the dsp param. This patch sets sample_type in base
config so that the sample type defined in the topology firmware is reflected
in the dsp params. This issues was uncovered while debugging the S24_LE format
which require the MSB byte in 32 bit word to be skipped. Setting sample_type
in topology firmware to 1 helps to skip MSB byte word.
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix compile warning in create_dyn_event(): 'ret' may be used uninitialized
in this function [-Wuninitialized].
Link: http://lkml.kernel.org/r/1553237900-8555-1-git-send-email-frowand.list@gmail.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 5448d44c38 ("tracing: Add unified dynamic event framework")
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If I'm reading the spec right AML 0x87CA is a Y SKU, so it
should be marked as ULX in our old style terminology.
Cc: stable@vger.kernel.org
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: c0c46ca461 ("drm/i915/aml: Add new Amber Lake PCI ID")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322204944.23613-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 57b1c4460d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Oded writes:
The following bug fixes are included in this tag:
- Fix host crash upon resume after suspend
- Fix MMU related bugs which result in user's jobs getting stuck
- Fix race between user context cleanup and hard-reset which results in
host crash
- Fix sparse warning
* tag 'misc-habanalabs-fixes-2019-03-26' of git://people.freedesktop.org/~gabbayo/linux: (265 commits)
habanalabs: cast to expected type
habanalabs: prevent host crash during suspend/resume
habanalabs: perform accounting for active CS
habanalabs: fix mapping with page size bigger than 4KB
habanalabs: complete user context cleanup before hard reset
habanalabs: fix bug when mapping very large memory area
habanalabs: fix MMU number of pages calculation
Linux 5.1-rc2
clocksource/drivers/clps711x: Remove board support
ext4: prohibit fstrim in norecovery mode
ext4: cleanup bh release code in ext4_ind_remove_space()
ext4: brelse all indirect buffer in ext4_ind_remove_space()
genirq: Mark expected switch case fall-through
clocksource/drivers/riscv: Fix clocksource mask
x86/gart: Exclude GART aperture from kcore
cifs: update internal module version number
SMB3: Fix SMB3.1.1 guest mounts to Samba
cifs: Fix slab-out-of-bounds when tracing SMB tcon
cifs: allow guest mounts to work for smb3.11
fix incorrect error code mapping for OBJECTID_NOT_FOUND
...
When EXTCON is a loadable module, mtu3 fails to link as built-in:
drivers/usb/mtu3/mtu3_plat.o: In function `mtu3_probe':
mtu3_plat.c:(.text+0x690): undefined reference to `extcon_get_edev_by_phandle'
Add a Kconfig dependency to force mtu3 also to be a loadable module
if extconn is, but still allow it to be built without extcon.
Fixes: d0ed062a8b ("usb: mtu3: dual-role mode support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_match_device in usb251xb_probe can fail and returns a NULL pointer.
The patch avoids a potential NULL pointer dereference in this scenario.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some PHYs do not support PHY_MODE_USB_HOST_SS, i.e. USB 3.0 or higher.
Fall back and try the more generic PHY_MODE_USB_HOST if it fails.
Fixes: b97a313483 ("usb: core: comply to PHY framework")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While only the first PHY supports mode switching, the remaining PHYs
work in USB host mode. They should support set_mode with mode=USB_HOST
instead of failing. This is especially needed now that the USB core does
set_mode for all USB ports, which was added in commit b97a313483 ("usb:
core: comply to PHY framework").
Make set_mode with mode=USB_HOST a no-op instead of failing for the
non-OTG USB PHYs.
Fixes: 6ba43c2919 ("phy-sun4i-usb: Add support for phy_set_mode")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case iscsi_lookup_endpoint fails, the fix returns -EINVAL to avoid NULL
pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are a few windows during AER/EEH when we can access PCIe I/O mapped
registers. This will harden the access to insure we do not allow PCIe
access during errors
Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Sagar Biradar <sagar.biradar@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During expander reset handling, the driver invokes kernel function
scsi_host_find_tag() to obtain outstanding requests associated with the
scsi host managed by the driver. Driver loops from tag value zero to hba
queue depth to obtain the outstanding scmds. But when blk-mq is enabled,
the block layer may return stale entry for one or more requests. This may
lead to kernel panic if the returned value is inaccessible or the memory
pointed by the returned value is reused.
Reference of upstream discussion:
https://patchwork.kernel.org/patch/10734933/
Instead of calling scsi_host_find_tag() API for each and every smid (smid
is tag +1) from one to shost->can_queue, now driver will call this API (to
obtain the outstanding scmd) only for those smid's which are outstanding at
the driver level.
Driver will determine whether this smid is outstanding at driver level by
looking into it's corresponding MPI request frame, if its MPI request frame
is empty, then it means that this smid is free and does not need to call
scsi_host_find_tag() for it. By doing this, driver will invoke
scsi_host_find_tag() for only those tags which are outstanding at the
driver level.
Driver will check whether particular MPI request frame is empty or not by
looking into the "DevHandle" field. If this field is zero then it means
that this MPI request is empty. For active MPI request DevHandle must be
non-zero.
Also driver will memset the MPI request frame once the corresponding scmd
is processed (i.e. just before calling
scmd->done function).
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
syzkaller was able to generate the following UAF in bpf:
BUG: KASAN: use-after-free in lookup_last fs/namei.c:2269 [inline]
BUG: KASAN: use-after-free in path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318
Read of size 1 at addr ffff8801c4865c47 by task syz-executor2/9423
CPU: 0 PID: 9423 Comm: syz-executor2 Not tainted 4.20.0-rc1-next-20181109+
#110
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x244/0x39d lib/dump_stack.c:113
print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412
__asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430
lookup_last fs/namei.c:2269 [inline]
path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318
filename_lookup+0x26a/0x520 fs/namei.c:2348
user_path_at_empty+0x40/0x50 fs/namei.c:2608
user_path include/linux/namei.h:62 [inline]
do_mount+0x180/0x1ff0 fs/namespace.c:2980
ksys_mount+0x12d/0x140 fs/namespace.c:3258
__do_sys_mount fs/namespace.c:3272 [inline]
__se_sys_mount fs/namespace.c:3269 [inline]
__x64_sys_mount+0xbe/0x150 fs/namespace.c:3269
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457569
Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fde6ed96c78 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000457569
RDX: 0000000020000040 RSI: 0000000020000000 RDI: 0000000000000000
RBP: 000000000072bf00 R08: 0000000020000340 R09: 0000000000000000
R10: 0000000000200000 R11: 0000000000000246 R12: 00007fde6ed976d4
R13: 00000000004c2c24 R14: 00000000004d4990 R15: 00000000ffffffff
Allocated by task 9424:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
__do_kmalloc mm/slab.c:3722 [inline]
__kmalloc_track_caller+0x157/0x760 mm/slab.c:3737
kstrdup+0x39/0x70 mm/util.c:49
bpf_symlink+0x26/0x140 kernel/bpf/inode.c:356
vfs_symlink+0x37a/0x5d0 fs/namei.c:4127
do_symlinkat+0x242/0x2d0 fs/namei.c:4154
__do_sys_symlink fs/namei.c:4173 [inline]
__se_sys_symlink fs/namei.c:4171 [inline]
__x64_sys_symlink+0x59/0x80 fs/namei.c:4171
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 9425:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kfree+0xcf/0x230 mm/slab.c:3817
bpf_evict_inode+0x11f/0x150 kernel/bpf/inode.c:565
evict+0x4b9/0x980 fs/inode.c:558
iput_final fs/inode.c:1550 [inline]
iput+0x674/0xa90 fs/inode.c:1576
do_unlinkat+0x733/0xa30 fs/namei.c:4069
__do_sys_unlink fs/namei.c:4110 [inline]
__se_sys_unlink fs/namei.c:4108 [inline]
__x64_sys_unlink+0x42/0x50 fs/namei.c:4108
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
In this scenario path lookup under RCU is racing with the final
unlink in case of symlinks. As Linus puts it in his analysis:
[...] We actually RCU-delay the inode freeing itself, but
when we do the final iput(), the "evict()" function is called
synchronously. Now, the simple fix would seem to just RCU-delay
the kfree() of the symlink data in bpf_evict_inode(). Maybe
that's the right thing to do. [...]
Al suggested to piggy-back on the ->destroy_inode() callback in
order to implement RCU deferral there which can then kfree() the
inode->i_link eventually right before putting inode back into
inode cache. By reusing free_inode_nonrcu() from there we can
avoid the need for our own inode cache and just reuse generic
one as we currently do.
And in-fact on top of all this we should just get rid of the
bpf_evict_inode() entirely. This means truncate_inode_pages_final()
and clear_inode() will then simply be called by the fs core via
evict(). Dropping the reference should really only be done when
inode is unhashed and nothing reachable anymore, so it's better
also moved into the final ->destroy_inode() callback.
Fixes: 0f98621bef ("bpf, inode: add support for symlinks and fix mtime/ctime")
Reported-by: syzbot+fb731ca573367b7f6564@syzkaller.appspotmail.com
Reported-by: syzbot+a13e5ead792d6df37818@syzkaller.appspotmail.com
Reported-by: syzbot+7a8ba368b47fdefca61e@syzkaller.appspotmail.com
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/lkml/0000000000006946d2057bbd0eef@google.com/T/
So far we effectively clear the BMCR register. Some PHY's can deal
with this (e.g. because they reset BMCR to a default as part of a
soft-reset) whilst on others this causes issues because e.g. the
autoneg bit is cleared. Marvell is an example, see also thread [0].
So let's be a little bit more gentle and leave all bits we're not
interested in as-is. This change is needed for PHY drivers to
properly deal with the original patch.
[0] https://marc.info/?t=155264050700001&r=1&w=2
Fixes: 6e2d85ec05 ("net: phy: Stop with excessive soft reset")
Tested-by: Phil Reid <preid@electromag.com.au>
Tested-by: liweihang <liweihang@hisilicon.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a multi-function device's bandwidth is already limited when it is
enumerated, a message is logged only for function 0. By contrast, when
downtraining occurs after enumeration, a message is logged for all
functions. That's because the former uses pcie_report_downtraining(),
whereas the latter uses __pcie_print_link_status() (which doesn't filter
functions != 0). I am seeing this happen on a MacBookPro9,1 with a GPU
(function 0) and an integrated HDA controller (function 1).
Avoid this incongruence by calling pcie_report_downtraining() in both
cases.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexandru Gagniuc <alex.gagniuc@dellteam.com>
When booting a MacBookPro9,1, duplicate link downtraining messages are
logged for the devices directly attached to the two CPU-internal Root Ports
of the Core i7 3615QM: Once on device enumeration and once on enablement
of the bandwidth notification interrupt on the Root Ports.
Duplicate messages do not occur with Root Ports on the PCH and Downstream
Ports on the Thunderbolt controller: Only a single message is logged for
these, namely on device enumeration.
The reason for the duplicate messages is a stale interrupt in the Link
Status register of the 3615QM's internal Root Ports. Avoid by clearing the
interrupt before enabling it.
An alternative approach would be to clear the interrupt already on device
enumeration or to report link downtraining only if the speed has changed.
That way, link downtraining occurring between device enumeration and
enablement of the bandwidth notification interrupt could be caught.
However clearing stale interrupts before enabling them is a standard
operating procedure for any driver and keeping the two steps in one place
makes the code easier to follow.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexandru Gagniuc <alex.gagniuc@dellteam.com>
