Pull ARM SoC fixes from Arnd Bergmann:
"There are a few more PHY mode changes for allwinner SoC based boards
with a Realtek PHY after the driver changed its behavior, I assume
there will be more of these in the future. Also on for Allwinner, the
Banana Pi M2 board had a regression that led to some devices not
working because of a slightly incorrect voltage being applied.
By popular demand, I picked up a change from Krzysztof Kozlowski to
actually list the SoC tree in the MAINTAINERS file. We don't want to
get Cc'd on normal patches that are picked up by platform maintainers,
but the lack of an entry has led to confusion in the past.
All the other changes are fairly benign, fixing boot-time or
compile-time warning messages in various places:
- A dtc warning on the OLPC XO-1.75
- A boot-time warning on i.MX6 wandboard
- A harmless compile-time warning
- A regression causing one of the i.MX6 SoCs to be identified as
another
- Missing SoC identification of Allwinner V3 and S3"
* tag 'arm-soc-fixes-v5.10-4b' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: xilinx: Mark pm_api_features_map with static keyword
ARM: dts: mmp2-olpc-xo-1-75: clear the warnings when make dtbs
MAINTAINERS: add a limited ARM and ARM64 SoC entry
MAINTAINERS: correct SoC Git address (formerly: arm-soc)
ARM: keystone: remove SECTION_SIZE_BITS/MAX_PHYSMEM_BITS
arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-id
arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id
ARM: dts: imx6qdl-kontron-samx6i: fix I2C_PM scl pin
ARM: dts: imx6qdl-wandboard-revd1: Remove PAD_GPIO_6 from enetgrp
ARM: imx: Use correct SRC base address
ARM: dts: sun7i: pcduino3-nano: enable RGMII RX/TX delay on PHY
ARM: dts: sun8i: v3s: fix GIC node memory range
ARM: dts: sun8i: v40: bananapi-m2-berry: Fix ethernet node
ARM: dts: sun8i: r40: bananapi-m2-berry: Fix dcdc1 regulator
ARM: dts: sun7i: bananapi: Enable RGMII RX/TX delay on Ethernet PHY
ARM: dts: s3: pinecube: align compatible property to other S3 boards
ARM: sunxi: Add machine match for the Allwinner V3 SoC
arm64: dts: allwinner: h6: orangepi-one-plus: Fix ethernet
The check_spi_bus_bridge() in scripts/dtc/checks.c requires that the node
have "spi-slave" property must with "#address-cells = <0>" and
"#size-cells = <0>". But currently both "#address-cells" and "#size-cells"
properties are deleted, the corresponding default values are 2 and 1. As a
result, the check fails and below warnings is displayed.
arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \
/soc/apb@d4000000/spi@d4037000: incorrect #address-cells for SPI bus
also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3
arch/arm/boot/dts/mmp2.dtsi:472.23-480.6: Warning (spi_bus_bridge): \
/soc/apb@d4000000/spi@d4037000: incorrect #size-cells for SPI bus
also defined at arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts:225.7-237.3
arch/arm/boot/dts/mmp2-olpc-xo-1-75.dtb: Warning (spi_bus_reg): \
Failed prerequisite 'spi_bus_bridge'
Because the value of "#size-cells" is already defined as zero in the node
"ssp3: spi@d4037000" in arch/arm/boot/dts/mmp2.dtsi. So we only need to
explicitly add "#address-cells = <0>" and keep "#size-cells" no change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20201207084752.1665-2-thunder.leizhen@huawei.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull iommu fix from Will Deacon:
"Fix interrupt table length definition for AMD IOMMU.
It's actually a fix for a fix, where the size of the interrupt
remapping table was increased but a related constant for the
size of the interrupt table was forgotten"
* tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
iommu/amd: Set DTE[IntTabLen] to represent 512 IRTEs
Toke Høiland-Jørgensen says:
====================
This series restores the test_offload.py selftest to working order. It seems a
number of subtle behavioural changes have crept into various subsystems which
broke test_offload.py in a number of ways. Most of these are fairly benign
changes where small adjustments to the test script seems to be the best fix,
but one is an actual kernel bug that I've observed in the wild caused by a bad
interaction between xdp_attachment_flags_ok() and the rework of XDP program
handling in the core netdev code.
Patch 1 fixes the bug by removing xdp_attachment_flags_ok(), and the reminder of
the patches are adjustments to test_offload.py, including a new feature for
netdevsim to force a BPF verification fail. Please see the individual patches
for details.
Changelog:
v4:
- Accidentally truncated the Fixes: hashes in patches 3/4 to 11 chars
v3:
- Add Fixes: tags
v2:
- Replace xdp_attachment_flags_ok() with a check in dev_xdp_attach()
- Better packing of struct nsim_dev
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
A few of the tests in test_offload.py expects to see a certain number of
maps created, and checks this by counting the number of maps returned by
bpftool. There is already a filter that will remove any maps already there
at the beginning of the test, but bpftool now creates a map for the PID
iterator rodata on each invocation, which makes the map count wrong. Fix
this by also filtering the pid_iter.rodata map by name when counting.
Fixes: d53dee3fe0 ("tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752226387.110217.9887866138149423444.stgit@toke.dk
When setting the ethtool feature flag fails (as expected for the test), the
kernel now tracks that the feature was requested to be 'off' and refuses to
subsequently disable it again. So reset it back to 'on' so a subsequent
disable (that's not supposed to fail) can succeed.
Fixes: 417ec26477 ("selftests/bpf: add offload test based on netdevsim")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752226280.110217.10696241563705667871.stgit@toke.dk
Since commit 6f8a57ccf8 ("bpf: Make verifier log more relevant by
default"), the verifier discards log messages for successfully-verified
programs. This broke test_offload.py which is looking for a verification
message from the driver callback. Change test_offload.py to use the toggle
in netdevsim to make the verification fail before looking for the
verification message.
Fixes: 6f8a57ccf8 ("bpf: Make verifier log more relevant by default")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752226069.110217.12370824996153348073.stgit@toke.dk
This adds a new debugfs toggle ('bpf_bind_verifier_accept') that can be
used to make netdevsim reject BPF programs from being accepted by the
verifier. If this toggle (which defaults to true) is set to false,
nsim_bpf_verify_insn() will return EOPNOTSUPP on the last
instruction (after outputting the 'Hello from netdevsim' verifier message).
This makes it possible to check the verification callback in the driver
from test_offload.py in selftests, since the verifier now clears the
verifier log on a successful load, hiding the message from the driver.
Fixes: 6f8a57ccf8 ("bpf: Make verifier log more relevant by default")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752225964.110217.12584017165318065332.stgit@toke.dk
Since commit 7f0a838254 ("bpf, xdp: Maintain info on attached XDP BPF
programs in net_device"), the XDP program attachment info is now maintained
in the core code. This interacts badly with the xdp_attachment_flags_ok()
check that prevents unloading an XDP program with different load flags than
it was loaded with. In practice, two kinds of failures are seen:
- An XDP program loaded without specifying a mode (and which then ends up
in driver mode) cannot be unloaded if the program mode is specified on
unload.
- The dev_xdp_uninstall() hook always calls the driver callback with the
mode set to the type of the program but an empty flags argument, which
means the flags_ok() check prevents the program from being removed,
leading to bpf prog reference leaks.
The original reason this check was added was to avoid ambiguity when
multiple programs were loaded. With the way the checks are done in the core
now, this is quite simple to enforce in the core code, so let's add a check
there and get rid of the xdp_attachment_flags_ok() callback entirely.
Fixes: 7f0a838254 ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752225751.110217.10267659521308669050.stgit@toke.dk
For BOs imported from outside of amdgpu, setting of amdgpu_gem_object_funcs
was missing in amdgpu_dma_buf_create_obj. Fix by refactoring BO creation
and amdgpu_gem_object_funcs setting into single function called
from both code paths.
Fixes: d693def4fd ("drm: Remove obsolete GEM and PRIME callbacks from struct drm_driver")
v2: Use use amdgpu_gem_object_create() directly
v3: fix warning
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Release dmabuf reference before returning from kfd_ioctl_import_dmabuf.
amdgpu_amdkfd_gpuvm_import_dmabuf takes a reference to the underlying
GEM BO and doesn't keep the reference to the dmabuf wrapper.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Without additional HostVM Latency, Renoir takes 2us longer to exit
self-refresh. This causes underflow in certain cases.
[How]
Add table for Renoir with updated sr exit latencies for WM set A.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
At very high pixel clock, bandwidth calculation exceeds 32 bit size
and overflow value. This causes the resulting selection of link rate
to be inaccurate.
[How]
Change order of operation and use fixed point to deal with integer
accuracy. Also address bug found when forcing link rate.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is still a warning when CONFIG_DEBUG_FS is disabled:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1145:13: error: 'amdgpu_ras_debugfs_create_ctrl_node' defined but not used [-Werror=unused-function]
1145 | static void amdgpu_ras_debugfs_create_ctrl_node(struct amdgpu_device *adev)
Change the code again to make the compiler actually drop
this code but not warn about it.
Fixes: ae2bf61ff3 ("drm/amdgpu: guard ras debugfs creation/removal based on CONFIG_DEBUG_FS")
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since commit 656c8e9cc1 ("netfilter: conntrack: Use consistent ct id
hash calculation") the ct id will not change from initialization to
confirmation. Removing the confirmation check allows for things like
adding an element to a 'typeof ct id' set in prerouting upon reception
of the first packet of a new connection, and then being able to
reference that set consistently both before and after the connection
is confirmed.
Fixes: 656c8e9cc1 ("netfilter: conntrack: Use consistent ct id hash calculation")
Signed-off-by: Brett Mastbergen <brett.mastbergen@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 9e2369c06c ("xen: add helpers to allocate unpopulated
memory") introduced usage of ZONE_DEVICE memory for foreign memory
mappings.
Unfortunately this collides with using page->lru for Xen backend
private page caches.
Fix that by using page->zone_device_data instead.
Cc: <stable@vger.kernel.org> # 5.9
Fixes: 9e2369c06c ("xen: add helpers to allocate unpopulated memory")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovksy@oracle.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Instead of having similar helpers in multiple backend drivers use
common helpers for caching pages allocated via gnttab_alloc_pages().
Make use of those helpers in blkback and scsiback.
Cc: <stable@vger.kernel.org> # 5.9
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovksy@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
EIC controller have unfixed numbers of banks on different Spreadtrum SoCs,
and each bank has its own base address, the loop of getting there base
address in driver should break if the resource gotten via
platform_get_resource() is NULL already. The later ones would be all NULL
even if the loop continues.
Fixes: 25518e024e ("gpio: Add Spreadtrum EIC driver support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20201209055106.840100-1-zhang.lyra@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
membarrier()'s MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE is documented as
syncing the core on all sibling threads but not necessarily the calling
thread. This behavior is fundamentally buggy and cannot be used safely.
Suppose a user program has two threads. Thread A is on CPU 0 and thread B
is on CPU 1. Thread A modifies some text and calls
membarrier(MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE).
Then thread B executes the modified code. If, at any point after
membarrier() decides which CPUs to target, thread A could be preempted and
replaced by thread B on CPU 0. This could even happen on exit from the
membarrier() syscall. If this happens, thread B will end up running on CPU
0 without having synced.
In principle, this could be fixed by arranging for the scheduler to issue
sync_core_before_usermode() whenever switching between two threads in the
same mm if there is any possibility of a concurrent membarrier() call, but
this would have considerable overhead. Instead, make membarrier() sync the
calling CPU as well.
As an optimization, this avoids an extra smp_mb() in the default
barrier-only mode and an extra rseq preempt on the caller.
Fixes: 70216e18e5 ("membarrier: Provide core serializing command, *_SYNC_CORE")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/250ded637696d490c69bef1877148db86066881c.1607058304.git.luto@kernel.org
membarrier() does not explicitly sync_core() remote CPUs; instead, it
relies on the assumption that an IPI will result in a core sync. On x86,
this may be true in practice, but it's not architecturally reliable. In
particular, the SDM and APM do not appear to guarantee that interrupt
delivery is serializing. While IRET does serialize, IPI return can
schedule, thereby switching to another task in the same mm that was
sleeping in a syscall. The new task could then SYSRET back to usermode
without ever executing IRET.
Make this more robust by explicitly calling sync_core_before_usermode()
on remote cores. (This also helps people who search the kernel tree for
instances of sync_core() and sync_core_before_usermode() -- one might be
surprised that the core membarrier code doesn't currently show up in a
such a search.)
Fixes: 70216e18e5 ("membarrier: Provide core serializing command, *_SYNC_CORE")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/776b448d5f7bd6b12690707f5ed67bcda7f1d427.1607058304.git.luto@kernel.org
sync_core_before_usermode() had an incorrect optimization. If the kernel
returns from an interrupt, it can get to usermode without IRET. It just has
to schedule to a different task in the same mm and do SYSRET. Fortunately,
there were no callers of sync_core_before_usermode() that could have had
in_irq() or in_nmi() equal to true, because it's only ever called from the
scheduler.
While at it, clarify a related comment.
Fixes: 70216e18e5 ("membarrier: Provide core serializing command, *_SYNC_CORE")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/5afc7632be1422f91eaf7611aaaa1b5b8580a086.1607058304.git.luto@kernel.org
Jann spotted the security hole due to race of mm ownership check.
If the task is sharing the mm_struct but goes through execve() before
mm_access(), it could skip process_madvise_behavior_valid check. That
makes *any advice hint* to reach into the remote process.
This patch removes the mm ownership check. With it, it will lose the
ability that local process could give *any* advice hint with vector
interface for some reason (e.g., performance). Since there is no
concrete example in upstream yet, it would be better to remove the
abiliity at this moment and need to review when such new advice comes
up.
Fixes: ecb8ac8b1f ("mm/madvise: introduce process_madvise() syscall: an external memory hinting API")
Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we need to keep the stolen vga memory, make sure it is
at least as big as the legacy vga size.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than in late_init to avoid race conditions between freeing the
buffers and the initial modeset.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When using old WORKLOAD_PPLIB setting in smu10.h, there is problem that
it can't be able to switch to mak gpu clk during compute workload.
It needs to update WORKLOAD_PPLIB setting to fix this issue.
Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to remove one unsupported smu function, this function
will set the smu feature mask to disable all smu features in exception.
Because vangogh doesn't support to set the smu feature mask
by driver software, so this function is invalid for vangogh.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Scatter/gather is APU feature.
But in dm it is limited only to Renoir.
Now we need it for Vangogh.
[How]
Apply system context setup in dm_init to all APUs.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Scatter/gather feature is supported on Vangogh.
[How]
Add GTT domain support for Vangogh to enable
display buffers in system memory.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Release dmabuf reference before returning from kfd_ioctl_import_dmabuf.
amdgpu_amdkfd_gpuvm_import_dmabuf takes a reference to the underlying
GEM BO and doesn't keep the reference to the dmabuf wrapper.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
each sdma instance fw_version and feature_version
should be set right value when asic type isn't
between SIENNA_CICHILD and CHIP_DIMGREY_CAVEFISH
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
