This allows drivers with a firmware or chip-based rate lookup table to
use the most recent default rate selection without having to get it from
per-packet data or explicit ieee80211_get_tx_rate calls
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Let the other listeners being notified when a new or del interface
command has been issued, thus reducing later necessary request to be in
sync with current context.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replace NL80211_ATTR_IFACE_SOCKET_OWNER attribute with more generic
NL80211_ATTR_SOCKET_OWNER that can be used with other commands
that interface creation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Callback add_virtual_intf is supposed to return ERR_PTR and trying to
return NULL results in some "Unable to handle kernel paging request",
etc. As it may be complicated to debug & trace, let's catch it (WARN).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Explicitly initialize the DFS state and beacon found state when handling
channels in the custom regulatory path.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Acked-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some channels fields were not being updated in the custom regulatory
path. Update them according to the code in handle_channel().
Signed-off-by: Jonathan Doron <jonathanx.doron@intel.com>
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Acked-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The rate mask code currently assumes that a rate is legacy if
IEEE80211_TX_RC_MCS is not set. This might be the cause of bogus VHT
rates being reported with minstrel_ht.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When 20MHz chandef is used, 40MHz rates shouldn't be
used (by the rate-control algorithm), even if the sta
ht capabilities indicate support for it.
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Singed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR with software
based scanning and generate a random MAC address for them for every
scan request with the flag.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to use the scan and scheduled scan request pointers during
RX to check for randomisation, make them accessible using RCU.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the necessary feature flags and a scan flag to support using
random MAC addresses for scan while unassociated.
The configuration for this supports an arbitrary MAC address
value and mask, so that any kind of configuration (e.g. fixed
OUI or full 46-bit random) can be requested. Full 46-bit random
is the default when no other configuration is passed.
Also add a small helper function to use the addr/mask correctly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
local->scan_req was tested in the previous line, so it
can't be NULL.
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a new WoWLAN API to enable net-detect as a wake up trigger.
Net-detect allows the device to scan in the background while the
host is asleep to wake up the host system when a matching network
is found.
Reuse the scheduled scan attributes to specify how the scan is
performed while suspended and the matches that will trigger a
wake event.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For net detect, we will need to reuse most of the scheduled scan
parsing function, but not all, so split out the attributes parsing
part out of the main start sched_scan function.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In TDLS (e.g., TDLS off-channel) there is a requirement for
some drivers to supply an unused TID between the AP and the
device to the FW, to allow sending PTI requests and to allow
the FW to aggregate on a specific TID for better throughput.
To ensure that the allocated TID is indeed unused, this patch
introduces an API for blocking the driver from TXing on that
TID.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the HW supports IEEE80211_HW_QUEUE_CONTROL, allow
flushing only specific queues rather than all of them.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When receiving a TDLS channel switch request or response, parse the frame
and call a new tdls_recv_channel_switch op in the low level driver with
the parsed data.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement the cfg80211 TDLS channel switch ops and introduce new mac80211
ones for low-level drivers.
Verify low-level driver support for the new ops when using the relevant
wiphy feature bit. Also verify the peer supports channel switching before
passing the command down.
Add a new STA flag to track the off-channel state with the TDLS peer and
make sure to cancel the channel-switch if the peer STA is unexpectedly
removed.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These are used in TDLS channel switching code.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce commands to initiate and cancel TDLS channel-switching. Once
TDLS channel-switching is started, the lower level driver is responsible
for continually initiating channel-switch operations and returning to
the base (AP) channel to listen for beacons from time to time.
Upon cancellation of the channel-switch all communication between the
relevant TDLS peers will continue on the base channel.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Split the data-generating from the Tx-sending functionality, as we do
not want to send templates to the lower driver. Also add an optional
chandef argument to the data-generating portion. It will be used for
channel-switch templates.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The AP or peer can prohibit TDLS channel switch via a bit in the
extended capabilities IE. Parse the IE and track this bit. Set an
appropriate STA flag if both the AP and peer STA support TDLS
channel-switching.
Add the new STA flag and the missing TDLS_INITIATOR to debugfs.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Define some related TDLS protocol constants and advertise channel switch
support in the extended-capabilities IE when the feature bit is defined.
Actually supporting TDLS channel-switching also requires support for
some new nl80211 commands, to be introduced by future patches.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the BSS coex IE in case we support HT40 channels, as mandated by
section 8.5.13 in IEEE802.11 2012.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This information element is mandatory in case TDLS channel-switching is to
be supported. The channels given are ones supported and allowed to be
active in the current regulatory setting.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For some TDLS channel switch implementations data frames need to be
sent by the firmware based on a template. This template should be
created by mac80211, and thus needs to properly be built from an
802.3 frame into an 802.11 frame. In addition, the device will need
the key information so the select_key handler needs to be run.
However, the driver/device will be responsible for all of the crypto
encapsulation, as the sequence numbers etc. cannot be built by the
host anyway in this case since it's a template to be used multiple
times.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Factor out the 802.11 header building code from the xmit function
to be able to use it separately in a later commit.
While at it, fix up some documentation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of passing the band as a parameter to ieee80211_xmit()
and ieee80211_tx(), move it outside of the two functions while
making sure info->band is set up before calling them.
This removes the parameter and simplifies the follow commit.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since the TDLS peer station might not receive the teardown
packet (e.g., when in PS), this makes sure the packet is
retransmitted - this time through the AP - if the TDLS peer
didn't ACK the packet.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allows setting of an skb's flags - if needed - when calling
ieee80211_subif_start_xmit().
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Both xprt_lookup_rqst() and xprt_complete_rqst() require that you
take the transport lock in order to avoid races with xprt_transmit().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The commit 5935839ad7
"mac80211: improve minstrel_ht rate sorting by throughput & probability"
introduced a crash on rate sorting that occurs when the rate added to
the sorting array is faster than all the previous rates. Due to an
off-by-one error, it reads the rate index from tp_list[-1], which
contains uninitialized stack garbage, and then uses the resulting index
for accessing the group rate stats, leading to a crash if the garbage
value is big enough.
Cc: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If icmp_rcv() has successfully processed the incoming ICMP datagram, we
should use consume_skb() rather than kfree_skb() because a hit on the likes
of perf -e skb:kfree_skb is not called-for.
Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg <johan.hedberg@gmail.com> says:
"Here's another bluetooth-next pull request for 3.19. We've got:
- Various fixes, cleanups and improvements to ieee802154/mac802154
- Support for a Broadcom BCM20702A1 variant
- Lots of lockdep fixes
- Fixed handling of LE CoC errors that should trigger SMP"
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This brings in some mwifiex changes that further patches will
need to work on top to not cause merge conflicts.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Doing things like hci_conn_hash_flush() while holding the hdev lock is
risky since its synchronous pending work cancellation could cause the
L2CAP layer to try to reacquire the hdev lock. Right now there doesn't
seem to be any obvious places where this would for certain happen but
it's already enough to cause lockdep to start warning against the hdev
and the work struct locks being taken in the "wrong" order:
[ +0.000373] mgmt-tester/1603 is trying to acquire lock:
[ +0.000292] ((&conn->pending_rx_work)){+.+.+.}, at: [<c104266d>] flush_work+0x0/0x181
[ +0.000270]
but task is already holding lock:
[ +0.000000] (&hdev->lock){+.+.+.}, at: [<c13b9a80>] hci_dev_do_close+0x166/0x359
[ +0.000000]
which lock already depends on the new lock.
[ +0.000000]
the existing dependency chain (in reverse order) is:
[ +0.000000]
-> #1 (&hdev->lock){+.+.+.}:
[ +0.000000] [<c105ea8f>] lock_acquire+0xe3/0x156
[ +0.000000] [<c140c663>] mutex_lock_nested+0x54/0x375
[ +0.000000] [<c13d644b>] l2cap_recv_frame+0x293/0x1a9c
[ +0.000000] [<c13d7ca4>] process_pending_rx+0x50/0x5e
[ +0.000000] [<c1041a3f>] process_one_work+0x21c/0x436
[ +0.000000] [<c1041e3d>] worker_thread+0x1be/0x251
[ +0.000000] [<c1045a22>] kthread+0x94/0x99
[ +0.000000] [<c140f801>] ret_from_kernel_thread+0x21/0x30
[ +0.000000]
-> #0 ((&conn->pending_rx_work)){+.+.+.}:
[ +0.000000] [<c105e158>] __lock_acquire+0xa07/0xc89
[ +0.000000] [<c105ea8f>] lock_acquire+0xe3/0x156
[ +0.000000] [<c1042696>] flush_work+0x29/0x181
[ +0.000000] [<c1042864>] __cancel_work_timer+0x76/0x8f
[ +0.000000] [<c104288c>] cancel_work_sync+0xf/0x11
[ +0.000000] [<c13d4c18>] l2cap_conn_del+0x72/0x183
[ +0.000000] [<c13d8953>] l2cap_disconn_cfm+0x49/0x55
[ +0.000000] [<c13be37a>] hci_conn_hash_flush+0x7a/0xc3
[ +0.000000] [<c13b9af6>] hci_dev_do_close+0x1dc/0x359
[ +0.012038] [<c13bbe38>] hci_unregister_dev+0x6e/0x1a3
[ +0.000000] [<c12d33c1>] vhci_release+0x28/0x47
[ +0.000000] [<c10dd6a9>] __fput+0xd6/0x154
[ +0.000000] [<c10dd757>] ____fput+0xd/0xf
[ +0.000000] [<c1044bb2>] task_work_run+0x6b/0x8d
[ +0.000000] [<c1001bd2>] do_notify_resume+0x3c/0x3f
[ +0.000000] [<c140fa70>] work_notifysig+0x29/0x31
[ +0.000000]
other info that might help us debug this:
[ +0.000000] Possible unsafe locking scenario:
[ +0.000000] CPU0 CPU1
[ +0.000000] ---- ----
[ +0.000000] lock(&hdev->lock);
[ +0.000000] lock((&conn->pending_rx_work));
[ +0.000000] lock(&hdev->lock);
[ +0.000000] lock((&conn->pending_rx_work));
[ +0.000000]
*** DEADLOCK ***
Fully fixing this would require some quite heavy refactoring to change
how the hdev lock and hci_conn instances are handled together. A simpler
solution for now which this patch takes is to try ensure that the hdev
workqueue is empty before proceeding with the various cleanup calls,
including hci_conn_hash_flush().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The common short form of "randomizer" is "rand" in many places
(including the Bluetooth specification). The shorter version also makes
for easier to read code with less forced line breaks. This patch renames
all occurences of "randomizer" to "rand" in the Bluetooth subsystem
code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
For now the mgmt commands dealing with remote OOB data are strictly
BR/EDR-only. This patch fixes missing checks for the passed address type
so that any non-BR/EDR value triggers the appropriate error response.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Currently all the conntrack lookups are done using default zone.
In case the skb has a ct attached (e.g. template) we should use this zone
for lookups instead. This makes connlimit work with connections assigned
to other zones.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Ebtables on the OUTPUT chain (NF_BR_LOCAL_OUT) would not work as expected
for both locally generated IGMP and MLD queries. The IP header specific
filter options are off by 14 Bytes for netfilter (actual output on
interfaces is fine).
NF_HOOK() expects the skb->data to point to the IP header, not the
ethernet one (while dev_queue_xmit() does not). Luckily there is an
br_dev_queue_push_xmit() helper function already - let's just use that.
Introduced by eb1d164143
("bridge: Add core IGMP snooping support")
Ebtables example:
$ ebtables -I OUTPUT -p IPv6 -o eth1 --logical-out br0 \
--log --log-level 6 --log-ip6 --log-prefix="~EBT: " -j DROP
before (broken):
~EBT: IN= OUT=eth1 MAC source = 02:04:64:a4:39:c2 \
MAC dest = 33:33:00:00:00:01 proto = 0x86dd IPv6 \
SRC=64a4:39c2:86dd:6000:0000:0020:0001:fe80 IPv6 \
DST=0000:0000:0000:0004:64ff:fea4:39c2:ff02, \
IPv6 priority=0x3, Next Header=2
after (working):
~EBT: IN= OUT=eth1 MAC source = 02:04:64:a4:39:c2 \
MAC dest = 33:33:00:00:00:01 proto = 0x86dd IPv6 \
SRC=fe80:0000:0000:0000:0004:64ff:fea4:39c2 IPv6 \
DST=ff02:0000:0000:0000:0000:0000:0000:0001, \
IPv6 priority=0x0, Next Header=0
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Make sure the netlink group exists, otherwise you can trigger an out
of bound array memory access from the netlink_bind() path. This splat
can only be triggered only by superuser.
[ 180.203600] UBSan: Undefined behaviour in ../net/netfilter/nfnetlink.c:467:28
[ 180.204249] index 9 is out of range for type 'int [9]'
[ 180.204697] CPU: 0 PID: 1771 Comm: trinity-main Not tainted 3.18.0-rc4-mm1+ #122
[ 180.205365] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org
+04/01/2014
[ 180.206498] 0000000000000018 0000000000000000 0000000000000009 ffff88007bdf7da8
[ 180.207220] ffffffff82b0ef5f 0000000000000092 ffffffff845ae2e0 ffff88007bdf7db8
[ 180.207887] ffffffff8199e489 ffff88007bdf7e18 ffffffff8199ea22 0000003900000000
[ 180.208639] Call Trace:
[ 180.208857] dump_stack (lib/dump_stack.c:52)
[ 180.209370] ubsan_epilogue (lib/ubsan.c:174)
[ 180.209849] __ubsan_handle_out_of_bounds (lib/ubsan.c:400)
[ 180.210512] nfnetlink_bind (net/netfilter/nfnetlink.c:467)
[ 180.210986] netlink_bind (net/netlink/af_netlink.c:1483)
[ 180.211495] SYSC_bind (net/socket.c:1541)
Moreover, define the missing nf_tables and nf_acct multicast groups too.
Reported-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch changes the byteorder handling for short and panid handling.
We now except to get little endian in nl802154 for these attributes.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch moves the 802.15.4 constraints WPAN_NUM_ defines into
"net/ieee802154.h" which should contain all necessary 802.15.4 related
information. Also rename these defines to a common name which is
IEEE802154_MAX_CHANNEL and IEEE802154_MAX_PAGE.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds support for deleting a wpan interface via nl802154.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds support for setting an extended address while
registration a new interface. If ieee802154_is_valid_extended_addr
getting as parameter and invalid extended address then the perm address
is fallback. This is useful to make some default handling while for
example default registration of a wpan interface while phy registration.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds a new nl802154 command for adding a new interface
according to a wpan phy via nl802154.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This parameter was grabbed from wireless implementation with the
identically wireless dev struct. We don't need this right now and so we
remove it. Maybe we will add it later again if we found any real reason
to have such parameter.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch replace the depracted IEEE802154_DEV to the new introduced
NL802154_IFTYPE_NODE types. There is a backwards compatibility to have
the identical types for both enum definitions. Also remove some inlcude
issue with "linux/nl802154.h", because the export nl_policy inside this
header it was always necessary to have an include of "net/rtnetlink.h"
before. The reason for this is more complicated. Nevertheless we removed
this now, because "linux/nl802154.h" is the depracted netlink interface.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We don't and we can't name it zigbee anymore. This patch removes
deprecated information for project website.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patches removes the const keyword in variables which are non
pointers. There is no sense to declare call by value parameters as
const.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patches removes the const keyword in variables which are non
pointers. There is no sense to declare call by value parameters as
const.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patches removes the const keyword in variables which are non
pointers. There is no sense to declare call by value parameters as const.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch removes some prototypes which are not used anymore.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
It has been reported that generating an MLD listener report on
devices with large MTUs (e.g. 9000) and a high number of IPv6
addresses can trigger a skb_over_panic():
skbuff: skb_over_panic: text:ffffffff80612a5d len:3776 put:20
head:ffff88046d751000 data:ffff88046d751010 tail:0xed0 end:0xec0
dev:port1
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:100!
invalid opcode: 0000 [#1] SMP
Modules linked in: ixgbe(O)
CPU: 3 PID: 0 Comm: swapper/3 Tainted: G O 3.14.23+ #4
[...]
Call Trace:
<IRQ>
[<ffffffff80578226>] ? skb_put+0x3a/0x3b
[<ffffffff80612a5d>] ? add_grhead+0x45/0x8e
[<ffffffff80612e3a>] ? add_grec+0x394/0x3d4
[<ffffffff80613222>] ? mld_ifc_timer_expire+0x195/0x20d
[<ffffffff8061308d>] ? mld_dad_timer_expire+0x45/0x45
[<ffffffff80255b5d>] ? call_timer_fn.isra.29+0x12/0x68
[<ffffffff80255d16>] ? run_timer_softirq+0x163/0x182
[<ffffffff80250e6f>] ? __do_softirq+0xe0/0x21d
[<ffffffff8025112b>] ? irq_exit+0x4e/0xd3
[<ffffffff802214bb>] ? smp_apic_timer_interrupt+0x3b/0x46
[<ffffffff8063f10a>] ? apic_timer_interrupt+0x6a/0x70
mld_newpack() skb allocations are usually requested with dev->mtu
in size, since commit 72e09ad107 ("ipv6: avoid high order allocations")
we have changed the limit in order to be less likely to fail.
However, in MLD/IGMP code, we have some rather ugly AVAILABLE(skb)
macros, which determine if we may end up doing an skb_put() for
adding another record. To avoid possible fragmentation, we check
the skb's tailroom as skb->dev->mtu - skb->len, which is a wrong
assumption as the actual max allocation size can be much smaller.
The IGMP case doesn't have this issue as commit 57e1ab6ead
("igmp: refine skb allocations") stores the allocation size in
the cb[].
Set a reserved_tailroom to make it fit into the MTU and use
skb_availroom() helper instead. This also allows to get rid of
igmp_skb_size().
Reported-by: Wei Liu <lw1a2.jing@gmail.com>
Fixes: 72e09ad107 ("ipv6: avoid high order allocations")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: David L Stevens <david.stevens@oracle.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
RSS (Receive Side Scaling) typically uses Toeplitz hash and a 40 or 52 bytes
RSS key.
Some drivers use a constant (and well known key), some drivers use a random
key per port, making bonding setups hard to tune. Well known keys increase
attack surface, considering that number of queues is usually a power of two.
This patch provides infrastructure to help drivers doing the right thing.
netdev_rss_key_fill() should be used by drivers to initialize their RSS key,
even if they provide ethtool -X support to let user redefine the key later.
A new /proc/sys/net/core/netdev_rss_key file can be used to get the host
RSS key even for drivers not providing ethtool -x support, in case some
applications want to precisely setup flows to match some RX queues.
Tested:
myhost:~# cat /proc/sys/net/core/netdev_rss_key
11:63:99:bb:79:fb:a5:a7:07:45:b2:20:bf:02:42:2d:08:1a:dd:19:2b:6b:23:ac:56:28:9d:70:c3:ac:e8:16:4b:b7:c1:10:53:a4:78:41:36:40:74:b6:15:ca:27:44:aa:b3:4d:72
myhost:~# ethtool -x eth0
RX flow hash indirection table for eth0 with 8 RX ring(s):
0: 0 1 2 3 4 5 6 7
RSS hash key:
11:63:99:bb:79:fb:a5:a7:07:45:b2:20:bf:02:42:2d:08:1a:dd:19:2b:6b:23:ac:56:28:9d:70:c3:ac:e8:16:4b:b7:c1:10:53:a4:78:41
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pravin B Shelar says:
====================
Open vSwitch
Following fixes are accumulated in ovs-repo.
Three of them are related to protocol processing, one is
related to memory leak in case of error and one is to
fix race.
Patch "Validate IPv6 flow key and mask values" has conflicts
with net-next, Let me know if you want me to send the patch
for net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Solves possible lockup issues that can be seen from firmware DCB agents calling
into the DCB app api.
DCB firmware event queues can be tied in with NAPI so that dcb events are
generated in softIRQ context. This can results in calls to dcb_*app()
functions which try to take the dcb_lock.
If the the event triggers while we also have the dcb_lock because lldpad or
some other agent happened to be issuing a get/set command we could see a cpu
lockup.
This code was not originally written with firmware agents in mind, hence
grabbing dcb_lock from softIRQ context was not considered.
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no reason to limit the amount of possible links to a
neighboring node to 2. If we have more then two bearers we can also
establish more links.
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Reviewed-By: Jon Maloy <jon.maloy@ericsson.com>
cc: Ying Xue <ying.xue@windriver.com>
cc: Erik Hugne <erik.hugne@ericsson.com>
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter updates for your net tree,
they are:
1) Fix missing initialization of the range structure (allocated in the
stack) in nft_masq_{ipv4, ipv6}_eval, from Daniel Borkmann.
2) Make sure the data we receive from userspace contains the req_version
structure, otherwise return an error incomplete on truncated input.
From Dan Carpenter.
3) Fix handling og skb->sk which may cause incorrect handling
of connections from a local process. Via Simon Horman, patch from
Calvin Owens.
4) Fix wrong netns in nft_compat when setting target and match params
structure.
5) Relax chain type validation in nft_compat that was recently included,
this broke the matches that need to be run from the route chain type.
Now iptables-test.py automated regression tests report success again
and we avoid the only possible problematic case, which is the use of
nat targets out of nat chain type.
6) Use match->table to validate the tablename, instead of the match->name.
Again patch for nft_compat.
7) Restore the synchronous release of objects from the commit and abort
path in nf_tables. This is causing two major problems: splats when using
nft_compat, given that matches and targets may sleep and call_rcu is
invoked from softirq context. Moreover Patrick reported possible event
notification reordering when rules refer to anonymous sets.
8) Fix race condition in between packets that are being confirmed by
conntrack and the ctnetlink flush operation. This happens since the
removal of the central spinlock. Thanks to Jesper D. Brouer to looking
into this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Trying to add an unreachable route incorrectly returns -ESRCH if
if custom FIB rules are present:
[root@localhost ~]# ip route add 74.125.31.199 dev eth0 via 1.2.3.4
RTNETLINK answers: Network is unreachable
[root@localhost ~]# ip rule add to 55.66.77.88 table 200
[root@localhost ~]# ip route add 74.125.31.199 dev eth0 via 1.2.3.4
RTNETLINK answers: No such process
[root@localhost ~]#
Commit 83886b6b63 ("[NET]: Change "not found"
return value for rule lookup") changed fib_rules_lookup()
to use -ESRCH as a "not found" code internally, but for user space it
should be translated into -ENETUNREACH. Handle the translation centrally in
ipv4-specific fib_lookup(), leaving the DECnet case alone.
On a related note, commit b7a71b51ee
("ipv4: removed redundant conditional") removed a similar translation from
ip_route_input_slow() prematurely AIUI.
Fixes: b7a71b51ee ("ipv4: removed redundant conditional")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Highlights include:
- Stable patches to fix NFSv4.x delegation reclaim error paths
- Fix a bug whereby we were advertising NFSv4.1 but using NFSv4.2 features
- Fix a use-after-free problem with pNFS block layouts
- Fix a memory leak in the pNFS files O_DIRECT code
- Replace an intrusive and Oops-prone performance fix in the NFSv4 atomic
open code with a safer one-line version and revert the two original patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8YN6
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.18-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- stable patches to fix NFSv4.x delegation reclaim error paths
- fix a bug whereby we were advertising NFSv4.1 but using NFSv4.2
features
- fix a use-after-free problem with pNFS block layouts
- fix a memory leak in the pNFS files O_DIRECT code
- replace an intrusive and Oops-prone performance fix in the NFSv4
atomic open code with a safer one-line version and revert the two
original patches"
* tag 'nfs-for-3.18-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
sunrpc: fix sleeping under rcu_read_lock in gss_stringify_acceptor
NFS: Don't try to reclaim delegation open state if recovery failed
NFSv4: Ensure that we call FREE_STATEID when NFSv4.x stateids are revoked
NFSv4: Fix races between nfs_remove_bad_delegation() and delegation return
NFSv4.1: nfs41_clear_delegation_stateid shouldn't trust NFS_DELEGATED_STATE
NFSv4: Ensure that we remove NFSv4.0 delegations when state has expired
NFS: SEEK is an NFS v4.2 feature
nfs: Fix use of uninitialized variable in nfs_getattr()
nfs: Remove bogus assignment
nfs: remove spurious WARN_ON_ONCE in write path
pnfs/blocklayout: serialize GETDEVICEINFO calls
nfs: fix pnfs direct write memory leak
Revert "NFS: nfs4_do_open should add negative results to the dcache."
Revert "NFS: remove BUG possibility in nfs4_open_and_get_state"
NFSv4: Ensure nfs_atomic_open set the dentry verifier on ENOENT
When passed BDADDR_ANY the Remove Remote OOB Data comand is specified to
clear all entries. This patch adds the necessary check and calls
hci_remote_oob_data_clear() when necessary.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds some extra debug logs to L2CAP related code. These are
mainly to help track locking issues but will probably be useful for
debugging other types of issues as well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Now that the SMP related key lists are converted to RCU there is nothing
in smp_cmd_sign_info() or smp_cmd_ident_addr_info() that would require
taking the hdev lock (including the smp_distribute_keys call). This
patch removes this unnecessary locking.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch set converts the hdev->identity_resolving_keys list to use
RCU to eliminate the need to use hci_dev_lock/unlock.
An additional change that must be done is to remove use of
CRYPTO_ALG_ASYNC for the hdev-specific AES crypto context. The reason is
that this context is used for matching RPAs and the loop that does the
matching is under the RCU read lock, i.e. is an atomic section which
cannot sleep.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch set converts the hdev->long_term_keys list to use RCU to
eliminate the need to use hci_dev_lock/unlock.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The insufficient authentication/encryption errors indicate to the L2CAP
client that it should try to elevate the security level. Since there
really isn't any exception to this rule it makes sense to fully handle
it on the kernel side instead of pushing the responsibility to user
space.
This patch adds special handling of these two error codes and calls
smp_conn_security() with the elevated security level if necessary.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
So far smp_sufficient_security() has returned false if we're encrypted
with an STK but do have an LTK available. However, for the sake of LE
CoC servers we do want to let the incoming connection through even
though we're only encrypted with the STK.
This patch adds a key preference parameter to smp_sufficient_security()
with two possible values (enum used instead of bool for readability).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
For LE CoC L2CAP servers we don't do security level elevation during the
BT_CONNECT2 state (instead LE CoC simply sends an immediate error
response if the security level isn't high enough). Therefore if we get a
security level change while an LE CoC channel is in the BT_CONNECT2
state we should simply do nothing.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
dp read operations depends on ovs_dp_cmd_fill_info(). This API
needs to looup vport to find dp name, but vport lookup can
fail. Therefore to keep vport reference alive we need to
take ovs lock.
Introduced by commit 6093ae9aba ("openvswitch: Minimize
dp and vport critical sections").
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Andy Zhou <azhou@nicira.com>
match_validate() enforce that a mask matching on NDP attributes has also an
exact match on ICMPv6 type.
The ICMPv6 type, which is 8-bit wide, is stored in the 'tp.src' field of
'struct sw_flow_key', which is 16-bit wide.
Therefore, an exact match on ICMPv6 type should only check the first 8 bits.
This commit fixes a bug that prevented flows with an exact match on NDP field
from being installed
Introduced by commit 03f0d916aa ("openvswitch: Mega flow implementation").
Signed-off-by: Daniele Di Proietto <ddiproietto@vmware.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
The checksum of ICMPv6 packets uses the IP pseudoheader as part of
the calculation, unlike ICMP in IPv4. This was not implemented,
which means that modifying the IP addresses of an ICMPv6 packet
would cause the checksum to no longer be correct as the psuedoheader
did not match.
Introduced by commit 3fdbd1ce11 ("openvswitch: add ipv6 'set' action").
Reported-by: Neal Shrader <icosahedral@gmail.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Need to free memory in case of sample action error.
Introduced by commit 651887b0c2 ("openvswitch: Sample
action without side effects").
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
John W. Linville says:
====================
pull request: wireless 2014-11-13
Please pull this set of a few more wireless fixes intended for the
3.18 stream...
For the mac80211 bits, Johannes says:
"This has just one fix, for an issue with the CCMP decryption
that can cause a kernel crash. I'm not sure it's remotely
exploitable, but it's an important fix nonetheless."
For the iwlwifi bits, Emmanuel says:
"Two fixes here - we weren't updating mac80211 if a scan
was cut short by RFKILL which confused cfg80211. As a
result, the latter wouldn't allow to run another scan.
Liad fixes a small bug in the firmware dump."
On top of that...
Arend van Spriel corrects a channel width conversion that caused a
WARNING in brcmfmac.
Hauke Mehrtens avoids a NULL pointer dereference in b43.
Larry Finger hits a trio of rtlwifi bugs left over from recent
backporting from the Realtek vendor driver.
Miaoqing Pan fixes a clocking problem in ath9k that could affect
packet timestamps and such.
Stanislaw Gruszka addresses an payload alignment issue that has been
plaguing rt2x00.
Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
After removal of the central spinlock nf_conntrack_lock, in
commit 93bb0ceb75 ("netfilter: conntrack: remove central
spinlock nf_conntrack_lock"), it is possible to race against
get_next_corpse().
The race is against the get_next_corpse() cleanup on
the "unconfirmed" list (a per-cpu list with seperate locking),
which set the DYING bit.
Fix this race, in __nf_conntrack_confirm(), by removing the CT
from unconfirmed list before checking the DYING bit. In case
race occured, re-add the CT to the dying list.
While at this, fix coding style of the comment that has been
updated.
Fixes: 93bb0ceb75 ("netfilter: conntrack: remove central spinlock nf_conntrack_lock")
Reported-by: bill bonaparte <programme110@gmail.com>
Signed-off-by: bill bonaparte <programme110@gmail.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add dependency on INET to fix following build error. I have also
fixed MPLS dependency.
ERROR: "ip_route_output_flow" [net/openvswitch/openvswitch.ko]
undefined!
make[1]: *** [__modpost] Error 1
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/ethernet/chelsio/cxgb4vf/sge.c
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
sge.c was overlapping two changes, one to use the new
__dev_alloc_page() in net-next, and one to use s->fl_pg_order in net.
ixgbe_phy.c was a set of overlapping whitespace changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) sunhme driver lacks DMA mapping error checks, based upon a report by
Meelis Roos.
2) Fix memory leak in mvpp2 driver, from Sudip Mukherjee.
3) DMA memory allocation sizes are wrong in systemport ethernet driver,
fix from Florian Fainelli.
4) Fix use after free in mac80211 defragmentation code, from Johannes
Berg.
5) Some networking uapi headers missing from Kbuild file, from Stephen
Hemminger.
6) TUN driver gets csum_start offset wrong when VLAN accel is enabled,
and macvtap has a similar bug, from Herbert Xu.
7) Adjust several tunneling drivers to set dev->iflink after registry,
because registry sets that to -1 overwriting whatever we did. From
Steffen Klassert.
8) Geneve forgets to set inner tunneling type, causing GSO segmentation
to fail on some NICs. From Jesse Gross.
9) Fix several locking bugs in stmmac driver, from Fabrice Gasnier and
Giuseppe CAVALLARO.
10) Fix spurious timeouts with NewReno on low traffic connections, from
Marcelo Leitner.
11) Fix descriptor updates in enic driver, from Govindarajulu
Varadarajan.
12) PPP calls bpf_prog_create() with locks held, which isn't kosher.
Fix from Takashi Iwai.
13) Fix NULL deref in SCTP with malformed INIT packets, from Daniel
Borkmann.
14) psock_fanout selftest accesses past the end of the mmap ring, fix
from Shuah Khan.
15) Fix PTP timestamping for VLAN packets, from Richard Cochran.
16) netlink_unbind() calls in netlink pass wrong initial argument, from
Hiroaki SHIMODA.
17) vxlan socket reuse accidently reuses a socket when the address
family is different, so we have to explicitly check this, from
Marcelo Lietner.
18) Fix missing include in nft_reject_bridge.c breaking the build on ppc
and other architectures, from Guenter Roeck.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
vxlan: Do not reuse sockets for a different address family
smsc911x: power-up phydev before doing a software reset.
lib: rhashtable - Remove weird non-ASCII characters from comments
net/smsc911x: Fix delays in the PHY enable/disable routines
net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down mode
netlink: Properly unbind in error conditions.
net: ptp: fix time stamp matching logic for VLAN packets.
cxgb4 : dcb open-lldp interop fixes
selftests/net: psock_fanout seg faults in sock_fanout_read_ring()
net: bcmgenet: apply MII configuration in bcmgenet_open()
net: bcmgenet: connect and disconnect from the PHY state machine
net: qualcomm: Fix dependency
ixgbe: phy: fix uninitialized status in ixgbe_setup_phy_link_tnx
net: phy: Correctly handle MII ioctl which changes autonegotiation.
ipv6: fix IPV6_PKTINFO with v4 mapped
net: sctp: fix memory leak in auth key management
net: sctp: fix NULL pointer dereference in af->from_addr_param on malformed packet
net: ppp: Don't call bpf_prog_create() in ppp_lock
net/mlx4_en: Advertize encapsulation offloads features only when VXLAN tunnel is set
cxgb4 : Fix bug in DCB app deletion
...
In DC world, GSO packets initially cooked by tcp_sendmsg() are usually
big, as sk_pacing_rate is high.
When network is congested, cwnd can be smaller than the GSO packets
found in socket write queue. tcp_write_xmit() splits GSO packets
using the available cwnd, and we end up sending a single GSO packet,
consuming all available cwnd.
With GRO aggregation on the receiver, we might handle a single GRO
packet, sending back a single ACK.
1) This single ACK might be lost
TLP or RTO are forced to attempt a retransmit.
2) This ACK releases a full cwnd, sender sends another big GSO packet,
in a ping pong mode.
This behavior does not fill the pipes in the best way, because of
scheduling artifacts.
Make sure we always have at least two GSO packets in flight.
This allows us to safely increase GRO efficiency without risking
spurious retransmits.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reallocation is only required for shrinking and expanding and both rely
on a mutex for synchronization and callers of rhashtable_init() are in
non atomic context. Therefore, no reason to continue passing allocation
hints through the API.
Instead, use GFP_KERNEL and add __GFP_NOWARN | __GFP_NORETRY to allow
for silent fall back to vzalloc() without the OOM killer jumping in as
pointed out by Eric Dumazet and Eric W. Biederman.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently mutex_is_held can only test locks in the that are global
since it takes no arguments. This prevents rhashtable from being
used in places where locks are lock, e.g., per-namespace locks.
This patch adds a parent field to mutex_is_held and rhashtable_params
so that local locks can be used (and tested).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rhashtable function mutex_is_held is only used when PROVE_LOCKING
is enabled. This patch modifies netfilter so that we can rhashtable.h
itself can later make mutex_is_held optional depending on PROVE_LOCKING.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rhashtable function mutex_is_held is only used when PROVE_LOCKING
is enabled. This patch modifies netlink so that we can rhashtable.h
itself can later make mutex_is_held optional depending on PROVE_LOCKING.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Large receive offloading is known to cause problems if received packets
are passed to other host. Therefore the kernel disables it by calling
dev_disable_lro() whenever a network device is enslaved in a bridge or
forwarding is enabled for it (or globally). For virtual devices we need
to disable LRO on the underlying physical device (which is actually
receiving the packets).
Current dev_disable_lro() code handles this propagation for a vlan
(including 802.1ad nested vlan), macvlan or a vlan on top of a macvlan.
It doesn't handle other stacked devices and their combinations, in
particular propagation from a bond to its slaves which often causes
problems in virtualization setups.
As we now have generic data structures describing the upper-lower device
relationship, dev_disable_lro() can be generalized to disable LRO also
for all lower devices (if any) once it is disabled for the device
itself.
For bonding and teaming devices, it is necessary to disable LRO not only
on current slaves at the moment when dev_disable_lro() is called but
also on any slave (port) added later.
v2: use lower device links for all devices (including vlan and macvlan)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/ipv4/fou.c: In function ‘ip_tunnel_encap_del_fou_ops’:
net/ipv4/fou.c:861:1: warning: no return statement in function returning non-void [-Wreturn-type]
Fixes: a8c5f90fb5 ("ip_tunnel: Ops registration for secondary encap (fou, gue)")
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
kick_requests() can put linger requests on the notarget list. This
means we need to clear the much-overloaded req->r_req_lru_item in
__unregister_linger_request() as well, or we get an assertion failure
in ceph_osdc_release_request() - !list_empty(&req->r_req_lru_item).
AFAICT the assumption was that registered linger requests cannot be on
any of req->r_req_lru_item lists, but that's clearly not the case.
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Requests have to be unlinked from both osd->o_requests (normal
requests) and osd->o_linger_requests (linger requests) lists when
clearing req->r_osd. Otherwise __unregister_linger_request() gets
confused and we trip over a !list_empty(&osd->o_linger_requests)
assert in __remove_osd().
MON=1 OSD=1:
# cat remove-osd.sh
#!/bin/bash
rbd create --size 1 test
DEV=$(rbd map test)
ceph osd out 0
sleep 3
rbd map dne/dne # obtain a new osdmap as a side effect
rbd unmap $DEV & # will block
sleep 3
ceph osd in 0
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
In case of OOM, there's nothing userspace can do.
If there's no room to put the payload in __build_packet_message(),
jump to nla_put_failure which already performs the corresponding
error reporting.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
net/bridge/br_netfilter.c:870:6: symbol 'br_netfilter_enable' was not declared. Should it be static?
no; add include
net/ipv4/netfilter/nft_reject_ipv4.c:22:6: symbol 'nft_reject_ipv4_eval' was not declared. Should it be static?
yes
net/ipv6/netfilter/nf_reject_ipv6.c:16:6: symbol 'nf_send_reset6' was not declared. Should it be static?
no; add include
net/ipv6/netfilter/nft_reject_ipv6.c:22:6: symbol 'nft_reject_ipv6_eval' was not declared. Should it be static?
yes
net/netfilter/core.c:33:32: symbol 'nf_ipv6_ops' was not declared. Should it be static?
no; add include
net/netfilter/xt_DSCP.c:40:57: cast truncates bits from constant value (ffffff03 becomes 3)
net/netfilter/xt_DSCP.c:57:59: cast truncates bits from constant value (ffffff03 becomes 3)
add __force, 3 is what we want.
net/ipv4/netfilter/nf_log_arp.c:77:6: symbol 'nf_log_arp_packet' was not declared. Should it be static?
yes
net/ipv4/netfilter/nf_reject_ipv4.c:17:6: symbol 'nf_send_reset' was not declared. Should it be static?
no; add include
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Server channels in BT_LISTEN state should use L2CAP_NESTING_PARENT. This
patch fixes the nesting value for the 6lowpan channel.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
There's no reason why all users of L2CAP would need to worry about
initializing chan->nesting to L2CAP_NESTING_NORMAL (which is important
since 0 is the same as NESTING_SMP). This patch moves the initialization
to the common place that's used to create all new channels, i.e. the
l2cap_chan_create() function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The teardown callback for L2CAP channels is problematic in that it is
explicitly called for all types of channels from l2cap_chan_del(),
meaning it's not possible to hard-code a nesting level when taking the
socket lock. The simplest way to have a correct nesting level for the
socket locking is to use the same value as for the chan. This also means
that the other places trying to lock parent sockets need to be update to
use the chan value (since L2CAP_NESTING_PARENT is defined as 2 whereas
SINGLE_DEPTH_NESTING has the value 1).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
By default lockdep considers all L2CAP channels equal. This would mean
that we get warnings if a channel is locked when another one's lock is
tried to be acquired in the same thread. This kind of inter-channel
locking dependencies exist in the form of parent-child channels as well
as any channel wishing to elevate the security by requesting procedures
on the SMP channel.
To eliminate the chance for these lockdep warnings we introduce a
nesting level for each channel and use that when acquiring the channel
lock. For now there exists the earlier mentioned three identified
categories: SMP, "normal" channels and parent channels (i.e. those in
BT_LISTEN state). The nesting level is defined as atomic_t since we need
access to it before the lock is actually acquired.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds a new interframe spacing time handling into mac802154
layer. Interframe spacing time is a time period between each transmit.
This patch adds a high resolution timer into mac802154 and starts on
xmit complete with corresponding interframe spacing expire time if
ifs_handling is true. We make it variable because it depends if
interframe spacing time is handled by transceiver or mac802154. At the
timer complete function we wake the netdev queue again. This avoids
new frame transmit in range of interframe spacing time.
For synced driver we add no handling of interframe spacing time. This
is currently a lack of support in all synced xmit drivers. I suppose
it's working because the latency of workqueue which is needed to call
spi_sync.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Fix the build failures that result from the use of pr_debug
without the referenced char * arrays being defined.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even if netlink_kernel_cfg::unbind is implemented the unbind() method is
not called, because cfg->unbind is omitted in __netlink_kernel_create().
And fix wrong argument of test_bit() and off by one problem.
At this point, no unbind() method is implemented, so there is no real
issue.
Fixes: 4f52090052 ("netlink: have netlink per-protocol bind function return an error code.")
Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Cc: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of calling fou and gue functions directly from ip_tunnel
use ops for these that were previously registered. This patch adds the
logic to add and remove encapsulation operations for ip_tunnel,
and modified fou (and gue) to register with ip_tunnels.
This patch also addresses a circular dependency between ip_tunnel
and fou that was causing link errors when CONFIG_NET_IP_TUNNEL=y
and CONFIG_NET_FOU=m. References to fou an gue have been removed from
ip_tunnel.c
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Standardize function pointer uses.
Convert calling style from:
(*foo)(args...);
to:
foo(args...);
Other miscellanea:
o Add braces around loops with single ifs on multiple lines
o Realign arguments around these functions
o Invert logic in if to return immediately.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the normal kernel debugging mechanism which also
enables dynamic_debug at the same time.
Other miscellanea:
o Remove sysctl for irda_debug
o Remove function tracing like uses (use ftrace instead)
o Coalesce formats
o Realign arguments
o Remove unnecessary OOM messages
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing xtables matches and targets, when used from nft_compat, may
sleep from the destroy path, ie. when removing rules. Since the objects
are released via call_rcu from softirq context, this results in lockdep
splats and possible lockups that may be hard to reproduce.
Patrick also indicated that delayed object release via call_rcu can
cause us problems in the ordering of event notifications when anonymous
sets are in place.
So, this patch restores the synchronous object release from the commit
and abort paths. This includes a call to synchronize_rcu() to make sure
that no packets are walking on the objects that are going to be
released. This is slowier though, but it's simple and it resolves the
aforementioned problems.
This is a partial revert of c7c32e7 ("netfilter: nf_tables: defer all
object release via rcu") that was introduced in 3.16 to speed up
interaction with userspace.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Instead of the match->name, which is of course not relevant.
Fixes: f3f5dde ("netfilter: nft_compat: validate chain type in match/target")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Check for nat chain dependency only, which is the one that can
actually crash the kernel. Don't care if mangle, filter and security
specific match and targets are used out of their scope, they are
harmless.
This restores iptables-compat with mangle specific match/target when
used out of the OUTPUT chain, that are actually emulated through filter
chains, which broke when performing strict validation.
Fixes: f3f5dde ("netfilter: nft_compat: validate chain type in match/target")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
warning: (NETFILTER_XT_TARGET_REDIRECT) selects NF_NAT_REDIRECT_IPV4 which has unmet direct dependencies (NET && INET && NETFILTER && NF_NAT_IPV4)
warning: (NETFILTER_XT_TARGET_REDIRECT) selects NF_NAT_REDIRECT_IPV6 which has unmet direct dependencies (NET && INET && IPV6 && NETFILTER && NF_NAT_IPV6)
Fixes: 8b13edd ("netfilter: refactor NAT redirect IPv4 to use it from nf_tables")
Fixes: 9de920e ("netfilter: refactor NAT redirect IPv6 code to use it from nf_tables")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The mgmt_user_passkey_request and related functions do not do anything
else except read access to hdev->id. This member never changes after the
hdev creation so there is no need to acquire a lock to read it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Any code calling bt_accept_dequeue() to get a new child socket from a
server socket should use lock_sock_nested to avoid lockdep warnings due
to the parent and child sockets being locked at the same time. The
l2cap_sock_accept() function is already doing this correctly but a
second place calling bt_accept_dequeue() is the code path from
l2cap_sock_teardown_cb() that calls l2cap_sock_cleanup_listen().
This patch fixes the proper nested locking annotation and thereby avoids
the following style of lockdep warning.
[ +0.000224] [ INFO: possible recursive locking detected ]
[ +0.000222] 3.17.0+ #1153 Not tainted
[ +0.000130] ---------------------------------------------
[ +0.000227] l2cap-tester/562 is trying to acquire lock:
[ +0.000210] (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}, at: [<c1393f47>] bt_accept_dequeue+0x68/0x11b
[ +0.000467]
but task is already holding lock:
[ +0.000186] (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}, at: [<c13b949a>] lock_sock+0xa/0xc
[ +0.000421]
other info that might help us debug this:
[ +0.000199] Possible unsafe locking scenario:
[ +0.000117] CPU0
[ +0.000000] ----
[ +0.000000] lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);
[ +0.000000] lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);
[ +0.000000]
*** DEADLOCK ***
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds support for setting listen before transmit mode via
nl802154 framework.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch add support for setting mac frame retries setting via
nl802154 framework.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch add support for max csma backoffs setting via nl802154
framework.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds support for setting backoff exponents via nl802154
framework.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds support for setting short address via nl802154 framework.
Also added a comment because a 0xffff seems to be valid address that we
don't have a short address. This is a valid setting but we need
more checks in upper layers to don't allow this address as source address.
Also the current netlink interface doesn't allow to set the short_addr
to 0xffff. Same for the 0xfffe short address which describes a not
allocated short address.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds support for setting pan_id via nl802154 framework.
Adding a comment because setting 0xffff as pan_id seems to be valid
setting. The pan_id 0xffff as source pan is invalid. I am not sure now
about this setting but for the current netlink interface this is an
invalid setting, so we do the same now. Maybe we need to change that
when we have coordinator support and association support.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds page and channel setting support to nl802154 framework.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds a netdev notifier for interface renaming. We have a name
attribute inside of subif data struct. This is needed to have always the
actual netdev name in sdata name attribute.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch changes the module description like wireless which is IEEE
802.11 "subsystem" and not "implementation".
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds an unique id for an wpan_phy. This behaviour is mostly
grabbed from wireless stack. This is needed for upcomming patches which
identify the wpan netdev while NETDEV_CHANGENAME in netdev notify function.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Instead of always re-lock the iflist_mtx at multiple interfaces we lock
the complete for each loop at start and at the end.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch is just a cleanup to name the temporary variable for
protected list for each loop as tmp.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch move the iface unregistration into iface.c file to have
a behaviour which is similar like mac80211. Also iface handling should
be inside iface.c file only.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
ip_vs_prepare_tunneled_skb() ignores ->sk when allocating a new
skb, either unconditionally setting ->sk to NULL or allowing
the uninitialized ->sk from a newly allocated skb to leak through
to the caller.
This patch properly copies ->sk and increments its reference count.
Signed-off-by: Calvin Owens <calvinowens@fb.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
And use the more common mechanisms directly.
Other miscellanea:
o Coalesce formats
o Add missing newlines
o Realign arguments
o Remove unnecessary OOM message logging as
there's a generic stack dump already on OOM.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use IS_ENABLED(CONFIG_IPV6), to enable this code if IPv6 is
a module.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: c8e6ad0829 ("ipv6: honor IPV6_PKTINFO with v4 mapped addresses on sendmsg")
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently there are only three neigh tables in the whole kernel:
arp table, ndisc table and decnet neigh table. What's more,
we don't support registering multiple tables per family.
Therefore we can just make these tables statically built-in.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A very minimal and simple user space application allocating an SCTP
socket, setting SCTP_AUTH_KEY setsockopt(2) on it and then closing
the socket again will leak the memory containing the authentication
key from user space:
unreferenced object 0xffff8800837047c0 (size 16):
comm "a.out", pid 2789, jiffies 4296954322 (age 192.258s)
hex dump (first 16 bytes):
01 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff816d7e8e>] kmemleak_alloc+0x4e/0xb0
[<ffffffff811c88d8>] __kmalloc+0xe8/0x270
[<ffffffffa0870c23>] sctp_auth_create_key+0x23/0x50 [sctp]
[<ffffffffa08718b1>] sctp_auth_set_key+0xa1/0x140 [sctp]
[<ffffffffa086b383>] sctp_setsockopt+0xd03/0x1180 [sctp]
[<ffffffff815bfd94>] sock_common_setsockopt+0x14/0x20
[<ffffffff815beb61>] SyS_setsockopt+0x71/0xd0
[<ffffffff816e58a9>] system_call_fastpath+0x12/0x17
[<ffffffffffffffff>] 0xffffffffffffffff
This is bad because of two things, we can bring down a machine from
user space when auth_enable=1, but also we would leave security sensitive
keying material in memory without clearing it after use. The issue is
that sctp_auth_create_key() already sets the refcount to 1, but after
allocation sctp_auth_set_key() does an additional refcount on it, and
thus leaving it around when we free the socket.
Fixes: 65b07e5d0d ("[SCTP]: API updates to suport SCTP-AUTH extensions.")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An SCTP server doing ASCONF will panic on malformed INIT ping-of-death
in the form of:
------------ INIT[PARAM: SET_PRIMARY_IP] ------------>
While the INIT chunk parameter verification dissects through many things
in order to detect malformed input, it misses to actually check parameters
inside of parameters. E.g. RFC5061, section 4.2.4 proposes a 'set primary
IP address' parameter in ASCONF, which has as a subparameter an address
parameter.
So an attacker may send a parameter type other than SCTP_PARAM_IPV4_ADDRESS
or SCTP_PARAM_IPV6_ADDRESS, param_type2af() will subsequently return 0
and thus sctp_get_af_specific() returns NULL, too, which we then happily
dereference unconditionally through af->from_addr_param().
The trace for the log:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000078
IP: [<ffffffffa01e9c62>] sctp_process_init+0x492/0x990 [sctp]
PGD 0
Oops: 0000 [#1] SMP
[...]
Pid: 0, comm: swapper Not tainted 2.6.32-504.el6.x86_64 #1 Bochs Bochs
RIP: 0010:[<ffffffffa01e9c62>] [<ffffffffa01e9c62>] sctp_process_init+0x492/0x990 [sctp]
[...]
Call Trace:
<IRQ>
[<ffffffffa01f2add>] ? sctp_bind_addr_copy+0x5d/0xe0 [sctp]
[<ffffffffa01e1fcb>] sctp_sf_do_5_1B_init+0x21b/0x340 [sctp]
[<ffffffffa01e3751>] sctp_do_sm+0x71/0x1210 [sctp]
[<ffffffffa01e5c09>] ? sctp_endpoint_lookup_assoc+0xc9/0xf0 [sctp]
[<ffffffffa01e61f6>] sctp_endpoint_bh_rcv+0x116/0x230 [sctp]
[<ffffffffa01ee986>] sctp_inq_push+0x56/0x80 [sctp]
[<ffffffffa01fcc42>] sctp_rcv+0x982/0xa10 [sctp]
[<ffffffffa01d5123>] ? ipt_local_in_hook+0x23/0x28 [iptable_filter]
[<ffffffff8148bdc9>] ? nf_iterate+0x69/0xb0
[<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0
[<ffffffff8148bf86>] ? nf_hook_slow+0x76/0x120
[<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0
[...]
A minimal way to address this is to check for NULL as we do on all
other such occasions where we know sctp_get_af_specific() could
possibly return with NULL.
Fixes: d6de309759 ("[SCTP]: Add the handling of "Set Primary IP Address" parameter to INIT")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the more common dynamic_debug capable net_dbg_ratelimited
and remove the LIMIT_NETDEBUG macro.
All messages are still ratelimited.
Some KERN_<LEVEL> uses are changed to KERN_DEBUG.
This may have some negative impact on messages that were
emitted at KERN_INFO that are not not enabled at all unless
DEBUG is defined or dynamic_debug is enabled. Even so,
these messages are now _not_ emitted by default.
This also eliminates the use of the net_msg_warn sysctl
"/proc/sys/net/core/warnings". For backward compatibility,
the sysctl is not removed, but it has no function. The extern
declaration of net_msg_warn is removed from sock.h and made
static in net/core/sysctl_net_core.c
Miscellanea:
o Update the sysctl documentation
o Remove the embedded uses of pr_fmt
o Coalesce format fragments
o Realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pravin B Shelar says:
====================
Open vSwitch
Following batch of patches brings feature parity between upstream
ovs and out of tree ovs module.
Two features are added, first adds support to export egress
tunnel information for a packet. This is used to improve
visibility in network traffic. Second feature allows userspace
vswitchd process to probe ovs module features. Other patches
are optimization and code cleanup.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Neaten and standardize the logging output.
Other miscellanea:
o Use pr_notice_once instead of a guard flag.
o Convert existing pr_<level> uses too.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alternative to RPS/RFS is to use hardware support for multiple
queues.
Then split a set of million of sockets into worker threads, each
one using epoll() to manage events on its own socket pool.
Ideally, we want one thread per RX/TX queue/cpu, but we have no way to
know after accept() or connect() on which queue/cpu a socket is managed.
We normally use one cpu per RX queue (IRQ smp_affinity being properly
set), so remembering on socket structure which cpu delivered last packet
is enough to solve the problem.
After accept(), connect(), or even file descriptor passing around
processes, applications can use :
int cpu;
socklen_t len = sizeof(cpu);
getsockopt(fd, SOL_SOCKET, SO_INCOMING_CPU, &cpu, &len);
And use this information to put the socket into the right silo
for optimal performance, as all networking stack should run
on the appropriate cpu, without need to send IPI (RPS/RFS).
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_mark_napi_id() is used to record for a flow napi id of incoming
packets for busypoll sake.
We should do this only on established flows, not on listeners.
This was 'working' by virtue of the socket cloning, but doing
this on SYN packets in unecessary cache line dirtying.
Even if we move sk_napi_id in the same cache line than sk_lock,
we are working to make SYN processing lockless, so it is desirable
to set sk_napi_id only for established flows.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Put duplicate detection into its own RX handler, and separate
out the conditions a bit to make the code more readable.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When kfree() is all that's needed to free an object protected by RCU
there's a kfree_rcu() convenience function that can be used. This patch
updates the 6lowpan code to use this, thereby eliminating the need for
the separate peer_free() function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
