On some platforms it is found that Linux more aggressively enters s2idle
than Windows enters Modern Standby and this uncovers some synchronization
issues for the platform. To aid in debugging this class of problems in
the future, add support for an extra optional callback intended for
drivers to emit extra debugging.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220829162953.5947-2-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tag (immutable branch) with v6.0-rc1 + the (acpi/x86) backlight
detect refactor work. For merging into the acpi, drm-* and pdx86
subsystems.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmMVsogUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yy6wgAlig+7hkq940L62lTpj0g2gNQv8zc
HCsMpnU7dnJcZYaEvIjouZhf33ZbN52c0fQq2JWjt7fFX04LLyIiyrJ26Lc293JR
++yXpJcVoewRGqApy/P3Z05TKUCLll5bexvK4t8isnhOtEXD/nDPWKTLIV2Kd1DK
nLY4KgRznXZ85RhYheUEdidZ7Lwlzt1JVBMq7tpnzu3nVdDExyZmqlqCUITcLynu
ysuASQGr0D2i+1vb9eifHIA3xsQO0S37Bv62aBMBKxB6B8Fz1DYr8VA2YvoT82Hv
IFT0hzCCZ/63Ljga05O78TwraxAQX0RvZWqjqGgnZg6fIBh2hxUiqeQY6g==
=SA1R
-----END PGP SIGNATURE-----
Merge tag 'backlight-detect-refactor-1' into review-hans
Immutable backlight-detect-refactor branch between acpi, drm-* and pdx86
Tag (immutable branch) with v6.0-rc1 + the (acpi/x86) backlight
detect refactor work. For merging into the acpi, drm-* and pdx86
subsystems.
We have to copy only selected fields from the original resource.
Because a PCI device will be removed immediately after getting
its resources, we may not use any allocated data, hence we may
not copy any pointers.
Consider the following scenario:
1/ a caller of p2sb_bar() gets the resource;
2/ the resource has been copied by platform_device_add_data()
in order to create a platform device;
3/ the platform device creation will call for the device driver's
->probe() as soon as a match found;
4/ the ->probe() takes given resources (see 2/) and tries to
access one of its field, i.e. 'name', in the
__devm_ioremap_resource() to create a pretty looking output;
5/ but the 'name' is a dangling pointer because p2sb_bar()
removed a PCI device, which 'name' had been copied to
the caller's memory.
6/ UAF (Use-After-Free) as a result.
Kudos to Mika for the initial analisys of the issue.
Fixes: 9745fb0747 ("platform/x86/intel: Add Primary to Sideband (P2SB) bridge support")
Reported-by: kernel test robot <oliver.sang@intel.com>
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/linux-i2c/YvPCbnKqDiL2XEKp@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/linux-i2c/YtjAswDKfiuDfWYs@xsang-OptiPlex-9020/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220901113406.65876-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The WMI subsystem in the kernel currently tracks WMI devices by
a GUID string not by ACPI device. The GUID used by the `wmi-bmof`
module however is available from many devices on nearly every machine.
This originally was thought to be a bug, but as it happens on most
machines it is a design mistake. It has been fixed by tying an ACPI
device to the driver with struct wmi_driver. So drivers that have
moved over to struct wmi_driver can actually support multiple
instantiations of a GUID without any problem.
Add an allow list into wmi.c for GUIDs that the drivers that are known
to use struct wmi_driver. The list is populated with `wmi-bmof` right
now. The additional instances of that in sysfs with be suffixed with -%d
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220829201500.6341-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add an entry summarizing the discussion about dealing with brightness
control on devices with more then 1 internal panel.
The original discussion can be found here:
https://lore.kernel.org/dri-devel/20220517152331.16217-1-hdegoede@redhat.com/
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The video_detect_dmi_table[] uses an unusual indentation for
before the ".name = ..." named struct initializers.
Instead of being indented with an extra tab compared to
the previous line's '{' these are indented to with only
a single space to allow for long DMI_MATCH() lines without
wrapping.
But over time some entries did not event have the single space
indent in front of the ".name = ..." lines.
Make things consistent by using a single space indent for these
lines everywhere.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
acpi_backlight=native is the default for these, but as the comment
explains the quirk was still necessary because even briefly registering
the acpi_video0 backlight; and then unregistering it once the native
driver showed up, was leading to issues.
After the "ACPI: video: Make backlight class device registration
a separate step" patch from earlier in this patch-series, we no
longer briefly register the acpi_video0 backlight on systems where
the native driver should be used.
So this is no longer an issue an the quirks are no longer needed.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215683
Tested-by: Werner Sembach <wse@tuxedocomputers.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
acpi_backlight=native is the default for the "Samsung X360", but as
the comment explains the quirk was still necessary because even
briefly registering the acpi_video0 backlight; and then unregistering
it once the native driver showed up, was leading to issues.
After the "ACPI: video: Make backlight class device registration
a separate step" patch from earlier in this patch-series, we no
longer briefly register the acpi_video0 backlight on systems where
the native driver should be used.
So this is no longer an issue an the quirk is no longer needed.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
acpi_video_set_dmi_backlight_type() is troublesome because it may end
up getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
In case of the acpi_video backlight, acpi_video_set_dmi_backlight_type()
actually calls acpi_video_unregister_backlight() since that is often
probed earlier, leading to userspace seeing the acpi_video0 class
device being briefly available, leading to races in userspace where
udev probe-rules try to access the device and it is already gone.
All callers have been fixed to no longer call it, so remove
acpi_video_set_dmi_backlight_type() now.
This means we now also no longer need acpi_video_unregister_backlight()
for the remove acpi_video backlight after it was wrongly registered hack,
so remove that too.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
Move all the acpi_backlight=[vendor|native] quirks from samsung-laptop to
drivers/acpi/video_detect.c .
Note the X360 -> acpi_backlight=native quirk is not moved because that
already was present in drivers/acpi/video_detect.c .
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Remove the asus-wmi quirk_entry.wmi_backlight_native quirk-flag, which
called acpi_video_set_dmi_backlight_type(acpi_backlight_native) and replace
it with acpi/video_detect.c video_detect_dmi_table[] entries using the
video_detect_force_native callback.
acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Remove the asus-wmi quirk_entry.wmi_backlight_power quirk-flag, which
called acpi_video_set_dmi_backlight_type(acpi_backlight_vendor) and replace
it with acpi/video_detect.c video_detect_dmi_table[] entries using the
video_detect_force_vendor callback.
acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
Note no entries are dropped from the dmi_system_id table in asus-nb-wmi.c.
This is because the entries using the removed wmi_backlight_power flag
also use other model specific quirks from the asus-wmi quirk_entry struct.
So the quirk_asus_x55u struct and the entries pointing to it cannot be
dropped.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Remove this check from the asus-wmi backlight handling:
/* Some Asus desktop boards export an acpi-video backlight interface,
stop this from showing up */
chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE);
if (chassis_type && !strcmp(chassis_type, "3"))
acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
This acpi_video_set_dmi_backlight_type(acpi_backlight_vendor) call must be
removed because other changes in this series change the native backlight
drivers to no longer unconditionally register their backlight. Instead
these drivers now do this check:
if (acpi_video_get_backlight_type(false) != acpi_backlight_native)
return 0; /* bail */
So leaving this in place can break things on laptops with a broken
DMI chassis-type, which would have GPU native brightness control before
the addition of the acpi_video_get_backlight_type() != native check.
Removing this should be ok now, since the ACPI video code has improved
heuristics for this itself now (which includes a chassis-type check).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move the backlight DMI quirks to acpi/video_detect.c, so that
the driver no longer needs to call acpi_video_set_dmi_backlight_type().
acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
Note that even though the DMI quirk table name was video_vendor_dmi_table,
5/6 quirks were actually quirks to use the GPU native backlight.
These 5 quirks also had a callback in their dmi_system_id entry which
disabled the acer-wmi vendor driver; and any DMI match resulted in:
acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
which disabled the acpi_video driver, so only the native driver was left.
The new entries for these 5/6 devices correctly marks these as needing
the native backlight driver.
Also note that other changes in this series change the native backlight
drivers to no longer unconditionally register their backlight. Instead
these drivers now do this check:
if (acpi_video_get_backlight_type(false) != acpi_backlight_native)
return 0; /* bail */
which without this patch would have broken these 5/6 "special" quirks.
Since I had to look at all the commits adding the quirks anyways, to make
sure that I understood the code correctly, I've also added links to
the various original bugzillas for these quirks to the new entries.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
acpi_video_set_dmi_backlight_type() is troublesome because it may end up
getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
In case of the acpi_video backlight, acpi_video_set_dmi_backlight_type()
actually calls acpi_video_unregister_backlight() since that is often
probed earlier, leading to userspace seeing the acpi_video0 class
device being briefly available, leading to races in userspace where
udev probe-rules try to access the device and it is already gone.
In case of toshiba_acpi there are no DMI quirks to move to
acpi/video_detect.c, but it also (ab)uses it for transflective
displays. Adding transflective display support to video_detect.c would
be quite involved. But luckily there are only 2 known models with
a transflective display, so we can just add DMI quirks for those.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Now that acpi_video_get_backlight_type() has apple-gmux detection (using
apple_gmux_present()), it is no longer necessary for the apple-gmux code
to manually remove possibly conflicting drivers.
So remove the handling for this from the apple-gmux driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add an acpi_video_get_backlight_type() == acpi_backlight_nvidia_wmi_ec
check. This will make nvidia-wmi-ec-backlight properly honor the user
selecting a different backlight driver through the acpi_backlight=...
kernel commandline option.
Since the auto-detect code check for nvidia-wmi-ec-backlight in
drivers/acpi/video_detect.c already checks that the WMI advertised
brightness-source is the embedded controller, this new check makes it
unnecessary for nvidia_wmi_ec_backlight_probe() to check this itself.
Suggested-by: Daniel Dadap <ddadap@nvidia.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On Apple laptops with an Apple GMUX using this for brightness control,
should take precedence of any other brightness control methods.
Add apple-gmux detection to acpi_video_get_backlight_type() using
the already existing apple_gmux_present() helper function.
This will allow removig the (ab)use of:
acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
Inside the apple-gmux driver.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On some new laptop designs a new Nvidia specific WMI interface is present
which gives info about panel brightness control and may allow controlling
the brightness through this interface when the embedded controller is used
for brightness control.
When this WMI interface is present and indicates that the EC is used,
then this interface should be used for brightness control.
Changes in v2:
- Use the new shared nvidia-wmi-ec-backlight.h header for the
WMI firmware API definitions
- ACPI_VIDEO can now be enabled on non X86 too,
adjust the Kconfig changes to match this.
Changes in v3:
- Use WMI_BRIGHTNESS_GUID define
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Refactor acpi_video_get_backlight_type() so that the heuristics /
detection steps are stricly in order of descending precedence.
Also move the comments describing the steps to when the various steps are
actually done, to avoid the comments getting out of sync with the code.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move the WMI interface definitions to a header, so that the definitions
can be shared with drivers/acpi/video_detect.c .
Changes in v2:
- Add missing Nvidia copyright header
- Move WMI_BRIGHTNESS_GUID to nvidia-wmi-ec-backlight.h as well
Suggested-by: Daniel Dadap <ddadap@nvidia.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Typically the acpi_video driver will initialize before radeon, which
used to cause /sys/class/backlight/acpi_video0 to get registered and then
radeon would register its own radeon_bl# device later. After which
the drivers/acpi/video_detect.c code unregistered the acpi_video0 device
to avoid there being 2 backlight devices.
This means that userspace used to briefly see 2 devices and the
disappearing of acpi_video0 after a brief time confuses the systemd
backlight level save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
To fix this the ACPI video code has been modified to make backlight class
device registration a separate step, relying on the drm/kms driver to
ask for the acpi_video backlight registration after it is done setting up
its native backlight device.
Add a call to the new acpi_video_register_backlight() when radeon skips
registering its own backlight device because of e.g. the firmware_flags
or the acpi_video_get_backlight_type() return value. This ensures that
if the acpi_video backlight device should be used, it will be available
before the radeon drm_device gets registered with userspace.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Typically the acpi_video driver will initialize before amdgpu, which
used to cause /sys/class/backlight/acpi_video0 to get registered and then
amdgpu would register its own amdgpu_bl# device later. After which
the drivers/acpi/video_detect.c code unregistered the acpi_video0 device
to avoid there being 2 backlight devices.
This means that userspace used to briefly see 2 devices and the
disappearing of acpi_video0 after a brief time confuses the systemd
backlight level save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
To fix this the ACPI video code has been modified to make backlight class
device registration a separate step, relying on the drm/kms driver to
ask for the acpi_video backlight registration after it is done setting up
its native backlight device.
Add a call to the new acpi_video_register_backlight() when amdgpu skips
registering its own backlight device because of either the firmware_flags
or the acpi_video_get_backlight_type() return value. This ensures that
if the acpi_video backlight device should be used, it will be available
before the amdgpu drm_device gets registered with userspace.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Typically the acpi_video driver will initialize before nouveau, which
used to cause /sys/class/backlight/acpi_video0 to get registered and then
nouveau would register its own nv_backlight device later. After which
the drivers/acpi/video_detect.c code unregistered the acpi_video0 device
to avoid there being 2 backlight devices.
This means that userspace used to briefly see 2 devices and the
disappearing of acpi_video0 after a brief time confuses the systemd
backlight level save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
To fix this the ACPI video code has been modified to make backlight class
device registration a separate step, relying on the drm/kms driver to
ask for the acpi_video backlight registration after it is done setting up
its native backlight device.
Add a call to the new acpi_video_register_backlight() when native backlight
device registration has failed / was skipped to ensure that there is a
backlight device available before the drm_device gets registered with
userspace.
Changes in v2:
- Add nouveau_acpi_video_register_backlight() wrapper to avoid unresolved
symbol errors on non X86
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On machins without an i915 opregion the acpi_video driver immediately
probes the ACPI video bus and used to also immediately register
acpi_video# backlight devices when supported.
Once the drm/kms driver then loaded later and possibly registered
a native backlight device then the drivers/acpi/video_detect.c code
unregistered the acpi_video0 device to avoid there being 2 backlight
devices (when acpi_video_get_backlight_type()==native).
This means that userspace used to briefly see 2 devices and the
disappearing of acpi_video0 after a brief time confuses the systemd
backlight level save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
To fix this the ACPI video code has been modified to make backlight class
device registration a separate step, relying on the drm/kms driver to
ask for the acpi_video backlight registration after it is done setting up
its native backlight device.
Add a call to the new acpi_video_register_backlight() after the i915 calls
acpi_video_register() (after setting up the i915 opregion) so that the
acpi_video backlight devices get registered on systems where the i915
native backlight device is not registered.
Changes in v2:
-Only call acpi_video_register_backlight() when a panel is detected
Changes in v3:
-Add a new intel_acpi_video_register() helper which checks if a panel
is present and then calls acpi_video_register_backlight()
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Remove the code to unregister acpi_video backlight devices when
a native backlight device gets registered later.
Now that the acpi_video backlight device registration is a separate step
which runs later, after the drm/kms driver is done setting up its own
native backlight device, it is no longer necessary to monitor for a
native (BACKLIGHT_RAW) device showing up later and to then unregister
the acpi_video backlight device(s).
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On x86/ACPI boards the acpi_video driver will usually initialize before
the kms driver (except i915). This causes /sys/class/backlight/acpi_video0
to show up and then the kms driver registers its own native backlight
device after which the drivers/acpi/video_detect.c code unregisters
the acpi_video0 device (when acpi_video_get_backlight_type()==native).
This means that userspace briefly sees 2 devices and the disappearing of
acpi_video0 after a brief time confuses the systemd backlight level
save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
To fix this make backlight class device registration a separate step
done by a new acpi_video_register_backlight() function. The intend is for
this to be called by the drm/kms driver *after* it is done setting up its
own native backlight device. So that acpi_video_get_backlight_type() knows
if a native backlight will be available or not at acpi_video backlight
registration time, avoiding the add + remove dance.
Note the new acpi_video_register_backlight() function is also called from
a delayed work to ensure that the acpi_video backlight devices does get
registered if necessary even if there is no drm/kms driver or when it is
disabled.
Changes in v2:
- Make register_backlight_delay a module parameter, mainly so that it can
be disabled by Nvidia binary driver users
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When acpi_video_register() has not run yet the video_bus_head will be
empty, so there is no need to check the register_count flag first.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move the list_del removing an acpi_video_bus from video_bus_head
on teardown to before the teardown is done, to avoid code iterating
over the video_bus_head list seeing acpi_video_bus objects on there
which are (partly) torn down already.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
All x86/ACPI kms drivers which register native/BACKLIGHT_RAW type
backlight devices call acpi_video_backlight_use_native() now. This sets
__acpi_video_get_backlight_type()'s internal static native_available flag.
This makes the backlight_device_get_by_type(BACKLIGHT_RAW) check
unnecessary.
Relying on the cached native_available value not only is simpler, it will
also work correctly in cases where then native backlight registration was
skipped because of acpi_video_backlight_use_native() returning false.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Before this commit when we want userspace to use the acpi_video backlight
device we register both the GPU's native backlight device and acpi_video's
firmware acpi_video# backlight device. This relies on userspace preferring
firmware type backlight devices over native ones.
Registering 2 backlight devices for a single display really is
undesirable, don't register the GPU's native backlight device when
another backlight device should be used.
Changes in v2:
- Add nouveau_acpi_video_backlight_use_native() wrapper to avoid unresolved
symbol errors on non X86
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix for TUF laptops returning with an -ENOSPC on calling
asus_wmi_evaluate_method_buf() when fetching default curves. The TUF method
requires at least 32 bytes space.
This also moves and changes the pr_debug() in fan_curve_check_present() to
pr_warn() in fan_curve_get_factory_default() so that there is at least some
indication in logs of why it fails.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20220828074638.5473-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It looks like that on Dell Latitude E6440 is WMI event 0x0012 0x0003 sent
when display changes brightness. When it happens kernel prints
"dell_wmi: Unknown WMI event type 0x12" message into dmesg.
So ignore it for now to not spam dmesg.
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20220827133040.15932-1-pali@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
v6.0-rc1 + "[PATCH v6 0/7] add support for another simatic board" series
for merging into the gpio, leds and pdx86 subsystems.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmMQxTsUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zO/Qf/XqsHSH5WHqrto/MYJ2CEiTz8nXQD
BD6nQh9AxKDo1HpW9H3SiXZf/+iZrpmcJ9uq6buE9Ls1n6xrmCULs1LE6RIbyVXe
KKd1NlbWrBd9tVakmy/nQgwUOmTXORGJUbdHNIPcYMM6Me+8sj/oFEA5gIW70cBS
Itd7IKNT7hk63DFdNgw0b00vobnkSd8jIx+U8aHip8fq474N2BHR0amb36TxztSu
uvA5XVP1hcTBHSKjy5KArLiiKG2ttYkmKf9urULeQhT+rrZ25pjGpvETksAVfKBh
QPS957aEPhQrzzmXCO65+Qm4HfltjOJjbOUa42TICN4MaTJHiUtcGR/PVg==
=CvyP
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-simatec-1' into review-hans
Tag (immutable branch) for:
v6.0-rc1 + "[PATCH v6 0/7] add support for another simatic board" series
for merging into the gpio, leds and pdx86 subsystems.
This adds support for the Siemens Simatic IPC427G. A board which
basically works like the 227G added in a previous patch. So all there is
to do is to add the station_id and make it take all the 227G branches.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20220825104422.14156-8-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Just load the watchdog module, after having identified that machine.
That watchdog module does not have any autoloading support.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20220825104422.14156-7-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This adds support of the Siemens Simatic IPC227G. Its LEDs are connected
to GPIO pins provided by the gpio-f7188x module. We make sure that
gets loaded, if not enabled in the kernel config no LED support will be
available.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20220825104422.14156-6-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
So that drivers building on top can find those pins with GPIO_LOOKUP
helpers.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220825104422.14156-5-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add GPIO support for Nuvoton NCT6116 chip. Nuvoton SuperIO chips are
very similar to the ones from Fintek. In other subsystems they also
share drivers and are called a family of drivers.
For the GPIO subsystem the only difference is that the direction bit is
reversed and that there is only one data bit per pin. On the SuperIO
level the logical device is another one.
On a chip level we do not have a manufacturer ID to check and also no
revision.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220825104422.14156-4-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Subsequent patches will touch that file, apply some nice to have style
changes before actually adding functional changes.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220825104422.14156-3-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Subsequent patches will touch that file, apply some nice to have style
changes before actually adding functional changes.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220825104422.14156-2-henning.schild@siemens.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We don't use software_node_register_nodes() in the code, fix the comment.
Fixes: 140355e5db ("platform/x86: intel_cht_int33fe: Convert software node array to group")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220824152115.88012-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Remove 'NULL' check for 'data->hpdev.client' in error flow of
mlxreg_lc_probe(). It cannot be 'NULL' at this point.
Fixes: b4b830a34d ("platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220823201937.46855-5-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Remove redundant 'NULL' check for of if 'data->notifier'.
Replace 'return err' by 'return 0' in mlxreg_lc_probe().
Fixes: 62f9529b8d ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220823201937.46855-4-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix locking issues:
- mlxreg_lc_state_update() takes a lock when set or clear
"MLXREG_LC_POWERED".
- All the devices can be deleted before MLXREG_LC_POWERED flag is cleared.
To fix it:
- Add lock() / unlock() at the beginning / end of
mlxreg_lc_event_handler() and remove locking from
mlxreg_lc_power_on_off() and mlxreg_lc_enable_disable()
- Add locked version of mlxreg_lc_state_update() -
mlxreg_lc_state_update_locked() for using outside
mlxreg_lc_event_handler().
(2) Remove redundant NULL check for of if 'data->notifier'.
Fixes: 62f9529b8d ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220823201937.46855-3-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix smatch warning:
drivers/platform/mellanox/mlxreg-lc.c:866 mlxreg_lc_probe() warn: passing zero to 'PTR_ERR'
by removing 'err = PTR_ERR(regmap)'.
Fixes: b4b830a34d ("platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220823201937.46855-2-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2 keymap fixes for the Acer Aspire One AOD270 and the same hardware
rebranded as Packard Bell Dot SC:
1. The F2 key is marked with a big '?' symbol on the Packard Bell Dot SC,
this sends WMID_HOTKEY_EVENTs with a scancode of 0x27 add a mapping
for this.
2. Scancode 0x61 is KEY_SWITCHVIDEOMODE. Usually this is a duplicate
input event with the "Video Bus" input device events. But on these devices
the "Video Bus" does not send events for this key. Map 0x61 to KEY_UNKNOWN
instead of using KE_IGNORE so that udev/hwdb can override it on these devs.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220829163544.5288-1-hdegoede@redhat.com
Fix the input-device not getting free-ed on probe-errors and
fix the msi_touchpad_dwork not getting cancelled on neither
probe-errors nor on remove.
Fixes: 143a4c0284 ("msi-laptop: send out touchpad on/off key")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220825141336.208597-3-hdegoede@redhat.com
