All in-kernel users have been converted to
{devm_}i2c_new_dummy_device(). Remove the old API.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
An initialization was added for two optional struct members. One of
these is always present in the dcn20_resource file, but the other one
depends on CONFIG_DRM_AMD_DC_DSC_SUPPORT and causes a build failure if
that is missing:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn20/dcn20_resource.c:926:14: error: excess elements in struct initializer [-Werror]
.num_dsc = 5,
Add another #ifdef around the assignment.
Fixes: c3d03c5a19 ("drm/amd/display: Include num_vmid and num_dsc within NV14's resource caps")
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mark switch cases where we are expecting to fall through.
This patch fixes the following error:
LINUX/arch/sh/kernel/kgdb.c: In function 'kgdb_arch_handle_exception':
LINUX/arch/sh/kernel/kgdb.c:267:6: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (kgdb_hex2long(&ptr, &addr))
^
LINUX/arch/sh/kernel/kgdb.c:269:2: note: here
case 'D':
^~~~
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
During definition of the CPU thermal zone of BCM283x SoC family there
was a misunderstanding of the meaning "criticial trip point" and the
thermal throttling range of the VideoCore firmware. The latter one takes
effect when the core temperature is at least 85 degree celsius or higher
So the current critical trip point doesn't make sense, because the
thermal shutdown appears before the firmware has a chance to throttle
the ARM core(s).
Fix these unwanted shutdowns by increasing the critical trip point
to a value which shouldn't be reached with working thermal throttling.
Fixes: 0fe4d2181c ("ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Depending on type of BPF programs served by BPF trampoline it can call original
function. In such case the trampoline will skip one stack frame while
returning. That will confuse function_graph tracer and will cause crashes with
bad RIP. Teach graph tracer to skip functions that have BPF trampoline attached.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
kernel/trace/trace_events_inject.c: In function trace_inject_entry:
kernel/trace/trace_events_inject.c:20:22: warning: variable buffer set but not used [-Wunused-but-set-variable]
It is never used, so remove it.
Link: http://lkml.kernel.org/r/20191207034409.25668-1-yuehaibing@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When pulling in Divya Indi's patch, I made a minor fix to remove unneeded
braces. I commited my fix up via "git commit -a --amend". Unfortunately, I
didn't realize I had some changes I was testing in the module code, and
those changes were applied to Divya's patch as well.
This reverts the accidental updates to the module code.
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Divya Indi <divya.indi@oracle.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Fixes: e585e6469d ("tracing: Verify if trace array exists before destroying it.")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Nicholas Johnson reports a null pointer deref as well as a refcount
underflow upon hot-removal of a Thunderbolt-attached AMD eGPU.
He's bisected the issue down to commit 586bc4aab8 ("ALSA: hda/hdmi -
fix vgaswitcheroo detection for AMD").
The commit iterates over PCI devices using pci_get_class() and
unreferences each device found, even though pci_get_class()
subsequently unreferences the device as well. Fix it.
Fixes: 586bc4aab8 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD")
Link: https://lore.kernel.org/r/PSXP216MB0438BFEAA0617283A834E11580580@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM/
Reported-and-tested-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Alexander Deucher <alexander.deucher@amd.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Link: https://lore.kernel.org/r/77aa6c01aefe1ebc4004e87b0bc714f2759f15c4.1575985006.git.lukas@wunner.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS dependency")
removed select for DEBUG_FS but we still need it at least for enabling
deeper idle states for the SoCs.
Signed-off-by: Tony Lindgren <tony@atomide.com>
The TI_CPSW_SWITCHDEV definition in Kconfig was changed from "select
NET_SWITCHDEV" to "depends on NET_SWITCHDEV", and therefore it is required
to explicitelly enable NET_SWITCHDEV config option in omap2plus_defconfig.
Fixes: 3727d259dd ("arm: omap2plus_defconfig: enable new cpsw switchdev driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The phy mode should be rgmii-id. For some reason, it used to work with
rgmii-txid but doesn't any more.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit 03856e928b ("bus: ti-sysc: Handle mstandby quirk and use it for
musb") added quirk handling for mstandby quirk but did not consider that
we also need a quirk variant for SYSC_QUIRK_FORCE_MSTANDBY.
We need to use forced idle mode for both SYSC_QUIRK_SWSUP_MSTANDBY and
SYSC_QUIRK_FORCE_MSTANDBY, but SYSC_QUIRK_SWSUP_MSTANDBY also need to
additionally also configure no-idle mode when enabled.
Fixes: 03856e928b ("bus: ti-sysc: Handle mstandby quirk and use it for musb")
Signed-off-by: Tony Lindgren <tony@atomide.com>
ARC4 is no longer considered secure, so it shouldn't be used, even as
just an example.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
In ovl_rename(), if new upper is hardlinked to old upper underneath
overlayfs before upper dirs are locked, user will get an ESTALE error
and a WARN_ON will be printed.
Changes to underlying layers while overlayfs is mounted may result in
unexpected behavior, but it shouldn't crash the kernel and it shouldn't
trigger WARN_ON() either, so relax this WARN_ON().
Reported-by: syzbot+bb1836a212e69f8e201a@syzkaller.appspotmail.com
Fixes: 804032fabb ("ovl: don't check rename to self")
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On non-samefs overlay without xino, non pure upper inodes should use a
pseudo_dev assigned to each unique lower fs and pure upper inodes use the
real upper st_dev.
It is fine for an overlay pure upper inode to use the same st_dev;st_ino
values as the real upper inode, because the content of those two different
filesystem objects is always the same.
In this case, however:
- two filesystems, A and B
- upper layer is on A
- lower layer 1 is also on A
- lower layer 2 is on B
Non pure upper overlay inode, whose origin is in layer 1 will have the same
st_dev;st_ino values as the real lower inode. This may result with a false
positive results of 'diff' between the real lower and copied up overlay
inode.
Fix this by using the upper st_dev;st_ino values in this case. This breaks
the property of constant st_dev;st_ino across copy up of this case. This
breakage will be fixed by a later patch.
Fixes: 5148626b80 ("ovl: allocate anon bdev per unique lower fs")
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We can allocate maximum fh size and encode into it directly.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Seprate on-disk encoding from in-memory and on-wire resresentation
of overlay file handle.
In-memory and on-wire we only ever pass around pointers to struct
ovl_fh, which encapsulates at offset 3 the on-disk format struct
ovl_fb. struct ovl_fb encapsulates at offset 21 the real file handle.
That makes sure that the real file handle is always 32bit aligned
in-memory when passed down to the underlying filesystem.
On-disk format remains the same and store/load are done into
correctly aligned buffer.
New nfs exported file handles are exported with aligned real fid.
Old nfs file handles are copied to an aligned buffer before being
decoded.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In the past, overlayfs required that lower fs have non null uuid in
order to support nfs export and decode copy up origin file handles.
Commit 9df085f3c9 ("ovl: relax requirement for non null uuid of
lower fs") relaxed this requirement for nfs export support, as long
as uuid (even if null) is unique among all lower fs.
However, said commit unintentionally also relaxed the non null uuid
requirement for decoding copy up origin file handles, regardless of
the unique uuid requirement.
Amend this mistake by disabling decoding of copy up origin file handle
from lower fs with a conflicting uuid.
We still encode copy up origin file handles from those fs, because
file handles like those already exist in the wild and because they
might provide useful information in the future.
There is an unhandled corner case described by Miklos this way:
- two filesystems, A and B, both have null uuid
- upper layer is on A
- lower layer 1 is also on A
- lower layer 2 is on B
In this case bad_uuid won't be set for B, because the check only
involves the list of lower fs. Hence we'll try to decode a layer 2
origin on layer 1 and fail.
We will deal with this corner case later.
Reported-by: Colin Ian King <colin.king@canonical.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/lkml/20191106234301.283006-1-colin.king@canonical.com/
Fixes: 9df085f3c9 ("ovl: relax requirement for non null uuid ...")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When converting to device property API the commit
8b2d3aeeb7 ("fbtft: Make use of device property API")
mistakenly placed the reading of the first value inside the loop,
that jumps over value after initialization sequence or sleep commands.
Move the above mentioned reading outside of the loop to restore
correct behaviour.
Besides that, we are using pre-increment operation which may lead to
out of the boundary access at the end of sequence. Thus, allocate buffer
with an additional element at the end to prevent out of the boundary
access.
Fixes: 8b2d3aeeb7 ("fbtft: Make use of device property API")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20191121140207.65089-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SuperH images crash too eearly to display any console output. Bisect
points to commit 507fd01d53 ("drivers: move the early platform device
support to arch/sh"). An analysis of that patch suggests that
early_platform_cleanup() is now called at the wrong time. Restoring its
call point fixes the problem.
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Fixes: 507fd01d53 ("drivers: move the early platform device support to arch/sh")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Landley <rob@landley.net>
Link: https://lore.kernel.org/r/20191203205852.15659-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On CML boards with the RT5682 headset codec and RT1011 speaker
amplifier, the platform firmware exposes three ACPI HIDs
(10EC5682, 10EC1011 and MX98357A). The last HID is a mistake in
DSDT tables, which causes the wrong machine driver to be loaded.
This patch changes the key used to identify boards and changes the
order of entries in the table to load the correct machine driver.
The order does matter and should not be modified to work-around this
firmware issue.
Signed-off-by: Amery Song <chao.song@intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Turns out SSP 3-5 are only available on cht, to avoid dumping on
undefined registers let's split the definition.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An error occurs during parsing more than one ext_data from the mailbox, because
of invalid data offset handling. Fix by removing the incorrect duplicate
increment of the offset.
The return value is also reset in the switch case. This does not change the
behavior but improves readability - there is no longer a need to check what the
return value of get_ext_windows is.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Bartosz Kokoszko <bartoszx.kokoszko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Added warning log when found some unknown FW boot ext header,
to improve debuggability.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In normal sound case all DAIs are detected as CPU-Codec.
simple_dai_link_of supports the presence of a platform but it counts
it as a CPU DAI resulting in the creation of an extra link.
Adding a platform property to a link description like:
simple-audio-card,dai-link {
cpu {
sound-dai = <&sai1>;
};
plat {
sound-dai = <&dsp>;
};
codec {
sound-dai = <&wm8960>;
}
will result in the creation of two links:
* sai1 <-> wm8960
* dsp <-> wm8960
which is obviously not what we want. We just want one single link
with:
* sai1 <-> wm8960 (and platform set to dsp).
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191209135353.17427-1-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The return value of soc_tplg_pcm_create() is currently not checked
in soc_tplg_pcm_elems_load(). If an error is to occur there, the
topology ignores it and continues loading.
Fix that by checking the status and rejecting the topology on error.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_add_dai_link() might fail. This situation occurs for
instance in a very specific use case where a PCM device and a
Back End DAI link are given identical names in the topology.
When this happens, soc_new_pcm_runtime() fails and then
snd_soc_add_dai_link() returns -ENOMEM when called from
soc_tplg_fe_link_create(). Because of that, the link will not
get added into the card list, so any attempt to remove it later
ends up in a panic.
Fix that by checking the return status and free the memory in case
of an error.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Gadget driver should always use config_ep_by_speed() to initialize
usb_ep struct according to usb device's operating speed. Otherwise,
usb_ep struct may be wrong if usb devcie's operating speed is changed.
The key point in this patch is that we want to make sure the desc pointer
in usb_ep struct will be set to NULL when gadget is disconnected.
This will force it to call config_ep_by_speed() to correctly initialize
usb_ep struct based on the new operating speed when gadget is
re-connected later.
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: EJ Hsu <ejh@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Commit 5e6669387e ("of/platform: Pause/resume sync state during init
and of_platform_populate()") paused/resumed sync state during init only
if Linux had parsed and populated a devicetree.
However, the check for that (of_have_populated_dt()) can change after
of_platform_default_populate_init() executes. One example of this is
when devicetree unittests are enabled. This causes an unmatched
pause/resume of sync state. To avoid this, just unconditionally
pause/resume sync state during init.
Fixes: 5e6669387e ("of/platform: Pause/resume sync state during init and of_platform_populate()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20191209193119.147056-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clear ep0's DWC3_EP_TRANSFER_STARTED flag if the END_TRANSFER command is
completed. Otherwise, we can't start control transfer again after
END_TRANSFER.
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Normally the END_TRANSFER command completion handler will clear the
DWC3_EP_TRANSFER_STARTED flag. However, if the command was sent without
interrupt on completion, then the flag will not be cleared. Make sure to
clear the flag in this case.
Cc: stable@vger.kernel.org
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This patch corrects the condition to kick the transfer without
giving back the requests when either request has remaining data
or when there are pending SGs. The && check was introduced during
spliting up the dwc3_gadget_ep_cleanup_completed_requests() function.
Fixes: f38e35dd84 ("usb: dwc3: gadget: split dwc3_gadget_ep_cleanup_completed_requests()")
Cc: stable@vger.kernel.org
Signed-off-by: Tejas Joglekar <joglekar@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.
Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 2865d42c78 ("staging: r8712u: Add the new driver to the mainline kernel")
Cc: stable <stable@vger.kernel.org> # 2.6.37
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210114751.5119-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.
Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: c2478d3907 ("staging: r8188eu: Add files for new driver - part 20")
Cc: stable <stable@vger.kernel.org> # 3.12
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210114751.5119-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure that the interrupt interface has an endpoint before trying to
access its endpoint descriptors to avoid dereferencing a NULL pointer.
The driver binds to the interrupt interface with interface number 0, but
must not assume that this interface or its current alternate setting are
the first entries in the corresponding configuration arrays.
Fixes: b72458a80c ("[PATCH] USB: Eagle and ADI 930 usb adsl modem driver")
Cc: stable <stable@vger.kernel.org> # 2.6.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210112601.3561-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.
Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 03270634e2 ("USB: Add ADU support for Ontrak ADU devices")
Cc: stable <stable@vger.kernel.org> # 2.6.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210112601.3561-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.
Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210112601.3561-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to use the current alternate setting when looking up the
endpoints on epic devices to avoid binding to an invalid interface.
Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 6e8cf7751f ("USB: add EPIC support to the io_edgeport driver")
Cc: stable <stable@vger.kernel.org> # 2.6.21
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210112601.3561-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Noticed this while working on some unrelated CRC stuff. Currently,
userspace has very little support for BPCs higher than 8. While this
doesn't matter for most things, on MST topologies we need to be careful
about ensuring that we do our best to make any given display
configuration fit within the bandwidth restraints of the topology, since
otherwise less people's monitor configurations will work.
Allowing for BPC settings higher than 8 dramatically increases the
required bandwidth for displays in most configurations, and consequently
makes it a lot less likely that said display configurations will pass
the atomic check.
In the future we want to fix this correctly by making it so that we
adjust the bpp for each display in a topology to be as high as possible,
while making sure to lower the bpp of each display in the event that we
run out of bandwidth and need to rerun our atomic check. But for now,
follow the behavior that both i915 and amdgpu are sticking to.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 232c9eec41 ("drm/nouveau: Use atomic VCPI helpers for MST")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In order to be able to use bpc values that are different from what the
connector reports, we want to be able to store the bpc value we decide
on using for an atomic state in nv50_head_atom and refer to that instead
of simply using the value that the connector reports throughout the
whole atomic check phase and commit phase. This will let us (eventually)
implement the max bpc connector property, and will also be needed for
limiting the bpc we use on MST displays to 8 in the next commit.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 232c9eec41 ("drm/nouveau: Use atomic VCPI helpers for MST")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since nv50_outp_atomic_check_view() can set crtc_state->mode_changed, we
probably should be calling it before handling any PBN changes. Just a
precaution.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 232c9eec41 ("drm/nouveau: Use atomic VCPI helpers for MST")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We do not support atomic modesetting on pre-nv50 hardware, but until now
our connector code was setting drm_connector->state on pre-nv50 hardware.
This causes the core to enter atomic modesetting paths in at least:
1. drm_connector_get_encoder(), returning connector->state->best_encoder
which is always 0, causing us to always report 0 as encoder_id in
the drmModeConnector struct returned by drmModeGetConnector().
2. drm_encoder_get_crtc(), returning NULL because uses_atomic get set,
causing us to always report 0 as crtc_id in the drmModeEncoder struct
returned by drmModeGetEncoder()
Which in turn confuses userspace, at least plymouth thinks that the pipe
has changed because of this and tries to reconfigure it unnecessarily.
More in general we should not set drm_connector->state in the non-atomic
code as this violates the drm-core's expectations.
This commit fixes this by using a nouveau_conn_atom struct embedded in the
nouveau_connector struct for property handling in the non-atomic case.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1706557
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Place the declaration of struct nouveau_conn_atom above that of
struct nouveau_connector. This commit makes no changes to the moved
block what so ever, it just moves it up a bit.
This is a preparation patch to fix some issues with connector handling
on pre nv50 displays (which do not use atomic modesetting).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Commit:
1c5fecb612 ("efi: Export Runtime Configuration Interface table to sysfs")
... added support for a Dell specific UEFI configuration table, but
failed to take into account that mapping the table should not be
attempted unless the table actually exists. If it doesn't exist,
the code usually fails silently unless pr_debug() prints are
enabled. However, on 32-bit PAE x86, the splat below is produced due
to the attempt to map the placeholder value EFI_INVALID_TABLE_ADDR
which we use for non-existing UEFI configuration tables, and which
equals ULONG_MAX.
memremap attempted on mixed range 0x00000000ffffffff size: 0x1e
WARNING: CPU: 1 PID: 1 at kernel/iomem.c:81 memremap+0x1a3/0x1c0
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.2-smp-mine #1
Hardware name: Hewlett-Packard HP Z400 Workstation/0B4Ch, BIOS 786G3 v03.61 03/05/2018
EIP: memremap+0x1a3/0x1c0
...
Call Trace:
? map_properties+0x473/0x473
? efi_rci2_sysfs_init+0x2c/0x154
? map_properties+0x473/0x473
? do_one_initcall+0x49/0x1d4
? parse_args+0x1e8/0x2a0
? do_early_param+0x7a/0x7a
? kernel_init_freeable+0x139/0x1c2
? rest_init+0x8e/0x8e
? kernel_init+0xd/0xf2
? ret_from_fork+0x2e/0x38
Fix this by checking whether the table exists before attempting to map it.
Reported-by: Richard Narron <comet.berkeley@gmail.com>
Tested-by: Richard Narron <comet.berkeley@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Fixes: 1c5fecb612 ("efi: Export Runtime Configuration Interface table to sysfs")
Link: https://lkml.kernel.org/r/20191210090945.11501-2-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When an optional reset is not present, __devm_reset_control_get() and
devm_reset_control_array_get() still register resource data to release
the non-existing reset on cleanup, which is futile.
Fix this by skipping NULL reset control pointers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
of_reset_control_array_get() and devm_reset_control_array_get() return
struct reset_control pointers, not internal struct reset_control_array
pointers, just like all other reset control API calls.
Correct the kerneldoc to match the code.
Fixes: 17c82e206d ("reset: Add APIs to manage array of resets")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The use of IS_ALIGNED() is incorrect, the typical resource we pass looks
like this: start: 0x8404318, size: 0x30. When using IS_ALIGNED() we will
get the following 0x8404318 & (0x18 - 1) = 0x10 which is definitively
not equal to 0, same goes with the size. These two checks would make the
driver fail probing.
Remove the resource checks, since there should be no constraint on the
base addresse or size.
Fixes: 77750bc089 ("reset: Add Broadcom STB SW_INIT reset controller driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
