Currently the bad_features2 fixup and the alignment updates in the superblock
are skipped if we mount a filesystem read-only. But for the root filesystem
the typical case is to mount read-only first and only later remount writeable
so we'll never perform this update at all. It's not a big problem but means
the logs of people needing the fixup get spammed at every boot because they
never happen on disk.
Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Remove the last of the macros-defined-to-static-functions.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
- xfs_sb.h add the XFS_SB_VERSION2_PARENTBIT features2 that has been
around in userspace for some time
- xfs_inode.h: move a few things out of __KERNEL__ that are needed by
userspace
- xfs_mount.h: only include xfs_sync.h under __KERNEL__
- xfs_inode.c: minor whitespace fixup. I accidentaly changes this when
importing this file for use by userspace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
There's almost nothing left in this function, instead remove the IRELE
on the real times inodes and the call to XFS_QM_UNMOUNT into xfs_unmountfs.
For the regular unmount case that means it now also happenes after dmapi
notification, but otherwise there is no difference in behaviour.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Currently we explicitly call xfs_iflush on the quota, real-time and root
inodes from xfs_unmount_flush. But we just called xfs_sync_inodes with
SYNC_ATTR and do an XFS_bflush aka xfs_flush_buftarg to make sure all inodes
are on disk already, so there is no need for these special cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
We never supported shared read-only filesystems, so remove the dead
code left over from IRIX for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Merge xfs_iextract and xfs_idestroy into xfs_ireclaim as they are never
called individually. Also rewrite most comments in this area as they
were severly out of date.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
The only thing left are the forced shutdown flags and freeze macros which
fit into xfs_mount.h much better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
No need to parse the mount option into a structure before applying it to
struct xfs_mount.
The content of xfs_start_flags gets merged into xfs_parseargs. Calls
inbetween don't care and can use mount members instead of the args struct.
This patch uncovered that the mount option for shared filesystems wasn't
ever exposed on Linux. The code to handle it is #if 0'ed in this patch
pending a decision on this feature. I'll send a writeup about it to the
list soon.
SGI-PV: 987246
SGI-Modid: xfs-linux-melb:xfs-kern:32371a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Bring the ail lock inside the struct xfs_ail. This means the AIL can be
entirely manipulated via the struct xfs_ail rather than needing both the
struct xfs_mount and the struct xfs_ail.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32350a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Rather than embedding the struct xfs_ail in the struct xfs_mount, allocate
it during AIL initialisation. Add a back pointer to the struct xfs_ail so
that we can pass around the xfs_ail and still be able to access the
xfs_mount if need be. This is th first step involved in isolating the AIL
implementation from the surrounding filesystem code.
SGI-PV: 988143
SGI-Modid: xfs-linux-melb:xfs-kern:32346a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Now that the deleted inodes list is unused, kill it. This also removes the
i_reclaim list head from the xfs_inode, shrinking it by two pointers.
SGI-PV: 988142
SGI-Modid: xfs-linux-melb:xfs-kern:32334a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Kill the unused arg in xfs_syncsub() and xfs_sync_inodes(). For callers of
xfs_syncsub() that only want to flush inodes, replace xfs_syncsub() with
direct calls to xfs_sync_inodes() as that is all that is being done with
the specific flags being passed in.
SGI-PV: 988140
SGI-Modid: xfs-linux-melb:xfs-kern:32305a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Now we've removed all users of the mount inode list, we can kill it. This
reduces the size of the xfs_inode by 2 pointers.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32293a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Clean up the way the maximum and minimum records for the btree blocks are
calculated. For the alloc and inobt btrees all the values are
pre-calculated in xfs_mount_common, and we switch the current loop around
the ugly generic macros that use cpp token pasting to generate type names
to two small helpers in normal C code. For the bmbt and bmdr trees these
helpers also exist, but can be called during runtime, too. Here we also
kill various macros dealing with them and inline the logic into the
get_minrecs / get_maxrecs / get_dmaxrecs methods in xfs_bmap_btree.c.
Note that all these new helpers take an xfs_mount * argument which will be
needed to determine the size of a btree block once we add support for
extended btree blocks with CRCs and other RAS information.
SGI-PV: 988146
SGI-Modid: xfs-linux-melb:xfs-kern:32292a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Move all the xfssyncd code to the new xfs_sync.c file. This places it
closer to the actual code that it interacts with, rather than just being
associated with high level VFS code.
SGI-PV: 988139
SGI-Modid: xfs-linux-melb:xfs-kern:32283a
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
xfs_unmounts can't and shouldn't return errors so declare it as returning
void.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31833a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Remove all the useless flags and code keyed off it in xfs_mountfs.
SGI-PV: 981498
SGI-Modid: xfs-linux-melb:xfs-kern:31831a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Currently the xfs module init/exit code is a mess. It's farmed out over a
lot of function with very little error checking. This patch makes sure we
propagate all initialization failures properly and clean up after them.
Various runtime initializations are replaced with compile-time
initializations where possible to make this easier. The exit path is
similarly consolidated.
There's now split out function to create/destroy the kmem zones and
alloc/free the trace buffers. I've also changed the ktrace allocations to
KM_MAYFAIL and handled errors resulting from that.
And yes, we really should replace the XFS_*_TRACE ifdefs with a single
XFS_TRACE..
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:31354a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Adds two pieces of functionality for the basis of case-insensitive support
in XFS:
1. A comparison result enumerated type: xfs_dacmp. It represents an
exact match, case-insensitive match or no match at all. This patch
only implements different and exact results.
2. xfs_nameops vector for specifying how to perform the hash generation
of filenames and comparision methods. In this patch the hash vector
points to the existing xfs_da_hashname function and the comparison
method does a length compare, and if the same, does a memcmp and
return the xfs_dacmp result.
All filename functions that use the hash (create, lookup remove, rename,
etc) now use the xfs_nameops.hashname function and all directory lookup
functions also use the xfs_nameops.compname function.
The lookup functions also handle case-insensitive results even though the
default comparison function cannot return that. And important aspect of
the lookup functions is that an exact match always has precedence over a
case-insensitive. So while a case-insensitive match is found, we have to
keep looking just in case there is an exact match. In the meantime, the
info for the first case-insensitive match is retained if no exact match is
found.
SGI-PV: 981519
SGI-Modid: xfs-linux-melb:xfs-kern:31205a
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
xfs_mount_init is inlined into xfs_fs_fill_super and allocation switched
to kzalloc. Plug a leak of the mount structure for most early mount
failures. Move xfs_icsb_init_counters to as late as possible in the mount
path and make sure to undo it so that no stale hotplug cpu notifiers are
left around on mount failures.
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31196a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Currently closing the rt/log block device is done in the wrong spot, and
far too early. So revampt it:
- xfs_blkdev_put moved out of xfs_free_buftarg into the caller so that
it is done after tearing down the buftarg completely.
- call to xfs_unmountfs_close moved from xfs_mountfs into caller so
that it's done after tearing down the filesystem completely.
- xfs_unmountfs_close is renamed to xfs_close_devices and made static
in xfs_super.c
- opening of the block devices is split into a helper xfs_open_devices
that is symetric in use to xfs_close_devices
- xfs_unmountfs can now lose struct cred
- error handling around device opening sanitized in xfs_fs_fill_super
SGI-PV: 981951
SGI-Modid: xfs-linux-melb:xfs-kern:31193a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
features2 fields.
Previously, mounting with noattr2 failed to achieve anything because
although it cleared the attr2 mount flag, it would set it again as soon as
it processed the superblock fields. The fix now has an explicit noattr2
flag and uses it later to fix up the versionnum and features2 fields.
SGI-PV: 980021
SGI-Modid: xfs-linux-melb:xfs-kern:31003a
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_reserve_blocks() calls xfs_icsb_sync_counters_locked(), which is not
defined if !CONFIG_SMP/!HAVE_PERCPU_SB
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30991a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
With the last two patches XFS_ICSB_SB_LOCKED is never checked and only
superflously passed to xfs_icsb_count, so kill it.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30920a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Add a new xfs_icsb_sync_counters_locked for the case where m_sb_lock
is already taken and add a flags argument to xfs_icsb_sync_counters so
that xfs_icsb_sync_counters_flags is not needed.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30917a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Replace the xfs_ail_entry_t with a struct list_head and clean the
surrounding code up. Also fixes a livelock in xfs_trans_first_push_ail()
by terminating the loop at the head of the list correctly.
SGI-PV: 978682
SGI-Modid: xfs-linux-melb:xfs-kern:30636a
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
We can just use xfs_ilock/xfs_iunlock instead and get rid of the ugly
bhv_vrwlock_t.
SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30533a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
the "ikeep" option is set rather than "noikeep".
This regression was introduced in 970451.
With no mount options specified, xfs_parseargs() does the following:
int ikeep = 0;
args->flags |= XFSMNT_BARRIER;
args->flags2 |= XFSMNT2_COMPAT_IOSIZE;
if (!options)
goto done;
It only sets the above two options by default and before, it also used to
set XFSMNT_IDELETE by default.
If options are specified, then
if (!(args->flags & XFSMNT_DMAPI) && !ikeep)
args->flags |= XFSMNT_IDELETE;
is executed later on which is skipped by the "goto done;" above.
The solution is to invert the logic.
SGI-PV: 977771
SGI-Modid: xfs-linux-melb:xfs-kern:30590a
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
When many hundreds to thousands of threads all try to do simultaneous
transactions and the log is in a tail-pushing situation (i.e. full), we
can get multiple threads walking the AIL list and contending on the AIL
lock.
The AIL push is, in effect, a simple I/O dispatch algorithm complicated by
the ordering constraints placed on it by the transaction subsystem. It
really does not need multiple threads to push on it - even when only a
single CPU is pushing the AIL, it can push the I/O out far faster that
pretty much any disk subsystem can handle.
So, to avoid contention problems stemming from multiple list walkers, move
the list walk off into another thread and simply provide a "target" to
push to. When a thread requires a push, it sets the target and wakes the
push thread, then goes to sleep waiting for the required amount of space
to become available in the log.
This mechanism should also be a lot fairer under heavy load as the waiters
will queue in arrival order, rather than queuing in "who completed a push
first" order.
Also, by moving the pushing to a separate thread we can do more
effectively overload detection and prevention as we can keep context from
loop iteration to loop iteration. That is, we can push only part of the
list each loop and not have to loop back to the start of the list every
time we run. This should also help by reducing the number of items we try
to lock and/or push items that we cannot move.
Note that this patch is not intended to solve the inefficiencies in the
AIL structure and the associated issues with extremely large list
contents. That needs to be addresses separately; parallel access would
cause problems to any new structure as well, so I'm only aiming to isolate
the structure from unbounded parallelism here.
SGI-PV: 972759
SGI-Modid: xfs-linux-melb:xfs-kern:30371a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
xfs_iocore_t is a structure embedded in xfs_inode. Except for one field it
just duplicates fields already in xfs_inode, and there is nothing this
abstraction buys us on XFS/Linux. This patch removes it and shrinks source
and binary size of xfs aswell as shrinking the size of xfs_inode by 60/44
bytes in debug/non-debug builds.
SGI-PV: 970852
SGI-Modid: xfs-linux-melb:xfs-kern:29754a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Un-obfuscate XFS_SB_LOCK, remove XFS_SB_LOCK->mutex_lock->spin_lock
macros, call spin_lock directly, remove extraneous cookie holdover from
old xfs code, and change lock type to spinlock_t.
SGI-PV: 970382
SGI-Modid: xfs-linux-melb:xfs-kern:29746a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Currently there is an indirection called ioops in the XFS data I/O path.
Various functions are called by functions pointers, but there is no
coherence in what this is for, and of course for XFS itself it's entirely
unused. This patch removes it instead and significantly reduces source and
binary size of XFS while making maintaince easier.
SGI-PV: 970841
SGI-Modid: xfs-linux-melb:xfs-kern:29737a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
m_growlock only needs plain binary mutex semantics, so use a struct mutex
instead of a semaphore for it.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29512a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Now that struct bhv_vfs doesn't have any members left we can kill it and
go directly from the super_block to the xfs_mount everywhere.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29509a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
All flags are added to xfs_mount's m_flag instead. Note that the 32bit
inode flag was duplicated in both of them, but only cleared in the mount
when it was not nessecary due to the filesystem beeing small enough. Two
flags are still required here - one to indicate the mount option setting,
and one to indicate if it applies or not.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29507a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Also remove the now dead behavior code.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29505a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
All vfs ops now take struct xfs_mount pointers and the behaviour related
glue is split out into methods of its own.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29504a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Mount options are now parsed by the main XFS module and rejected if quota
support is not available, and there are some new quota operation for the
quotactl syscall and calls to quote in the mount, unmount and sync
callchains.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29503a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Mount options are now parsed by the main XFS module and rejected if dmapi
support is not available, and there is a new dm operation to send the
mount event.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29502a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Now that struct bhv_vnode is empty we can just kill it. Retain bhv_vnode_t
as a typedef for struct inode for the time being until all the fallout is
cleaned up.
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29500a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
One of the perpetual scaling problems XFS has is indexing it's incore
inodes. We currently uses hashes and the default hash sizes chosen can
only ever be a tradeoff between memory consumption and the maximum
realistic size of the cache.
As a result, anyone who has millions of inodes cached on a filesystem
needs to tunes the size of the cache via the ihashsize mount option to
allow decent scalability with inode cache operations.
A further problem is the separate inode cluster hash, whose size is based
on the ihashsize but is smaller, and so under certain conditions (sparse
cluster cache population) this can become a limitation long before the
inode hash is causing issues.
The following patchset removes the inode hash and cluster hash and
replaces them with radix trees to avoid the scalability limitations of the
hashes. It also reduces the size of the inodes by 3 pointers....
SGI-PV: 969561
SGI-Modid: xfs-linux-melb:xfs-kern:29481a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Creates a new xfs_dsb_t that is __be annotated and keeps xfs_sb_t for the
incore one. xfs_xlatesb is renamed to xfs_sb_to_disk and only handles the
incore -> disk conversion. A new helper xfs_sb_from_disk handles the other
direction and doesn't need the slightly hacky table-driven approach
because we only ever read the full sb from disk.
The handling of shared r/o filesystems has been buggy on little endian
system and fixing this required shuffling around of some code in that
area.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29477a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
m_nreadaheads in the mount struct is never used; remove it and the various
macros assigned to it. Also remove a couple other unused macros in the
same areas.
Removes one user of xfs_physmem.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29322a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
In media spaces, video is often stored in a frame-per-file format. When
dealing with uncompressed realtime HD video streams in this format, it is
crucial that files do not get fragmented and that multiple files a placed
contiguously on disk.
When multiple streams are being ingested and played out at the same time,
it is critical that the filesystem does not cross the streams and
interleave them together as this creates seek and readahead cache miss
latency and prevents both ingest and playout from meeting frame rate
targets.
This patch set creates a "stream of files" concept into the allocator to
place all the data from a single stream contiguously on disk so that RAID
array readahead can be used effectively. Each additional stream gets
placed in different allocation groups within the filesystem, thereby
ensuring that we don't cross any streams. When an AG fills up, we select a
new AG for the stream that is not in use.
The core of the functionality is the stream tracking - each inode that we
create in a directory needs to be associated with the directories' stream.
Hence every time we create a file, we look up the directories' stream
object and associate the new file with that object.
Once we have a stream object for a file, we use the AG that the stream
object point to for allocations. If we can't allocate in that AG (e.g. it
is full) we move the entire stream to another AG. Other inodes in the same
stream are moved to the new AG on their next allocation (i.e. lazy
update).
Stream objects are kept in a cache and hold a reference on the inode.
Hence the inode cannot be reclaimed while there is an outstanding stream
reference. This means that on unlink we need to remove the stream
association and we also need to flush all the associations on certain
events that want to reclaim all unreferenced inodes (e.g. filesystem
freeze).
SGI-PV: 964469
SGI-Modid: xfs-linux-melb:xfs-kern:29096a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Vlad Apostolov <vapo@sgi.com>
When we have a couple of hundred transactions on the fly at once, they all
typically modify the on disk superblock in some way.
create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify
free block counts.
When these counts are modified in a transaction, they must eventually lock
the superblock buffer and apply the mods. The buffer then remains locked
until the transaction is committed into the incore log buffer. The result
of this is that with enough transactions on the fly the incore superblock
buffer becomes a bottleneck.
The result of contention on the incore superblock buffer is that
transaction rates fall - the more pressure that is put on the superblock
buffer, the slower things go.
The key to removing the contention is to not require the superblock fields
in question to be locked. We do that by not marking the superblock dirty
in the transaction. IOWs, we modify the incore superblock but do not
modify the cached superblock buffer. In short, we do not log superblock
modifications to critical fields in the superblock on every transaction.
In fact we only do it just before we write the superblock to disk every
sync period or just before unmount.
This creates an interesting problem - if we don't log or write out the
fields in every transaction, then how do the values get recovered after a
crash? the answer is simple - we keep enough duplicate, logged information
in other structures that we can reconstruct the correct count after log
recovery has been performed.
It is the AGF and AGI structures that contain the duplicate information;
after recovery, we walk every AGI and AGF and sum their individual
counters to get the correct value, and we do a transaction into the log to
correct them. An optimisation of this is that if we have a clean unmount
record, we know the value in the superblock is correct, so we can avoid
the summation walk under normal conditions and so mount/recovery times do
not change under normal operation.
One wrinkle that was discovered during development was that the blocks
used in the freespace btrees are never accounted for in the AGF counters.
This was once a valid optimisation to make; when the filesystem is full,
the free space btrees are empty and consume no space. Hence when it
matters, the "accounting" is correct. But that means the when we do the
AGF summations, we would not have a correct count and xfs_check would
complain. Hence a new counter was added to track the number of blocks used
by the free space btrees. This is an *on-disk format change*.
As a result of this, lazy superblock counters are a mkfs option and at the
moment on linux there is no way to convert an old filesystem. This is
possible - xfs_db can be used to twiddle the right bits and then
xfs_repair will do the format conversion for you. Similarly, you can
convert backwards as well. At some point we'll add functionality to
xfs_admin to do the bit twiddling easily....
SGI-PV: 964999
SGI-Modid: xfs-linux-melb:xfs-kern:28652a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
When growing a filesystem we don't check to see if the new size overflows
the page cache index range, so we can do silly things like grow a
filesystem page 16TB on a 32bit. Check new filesystem sizes against the
limits the kernel can support.
SGI-PV: 957886
SGI-Modid: xfs-linux-melb:xfs-kern:28563a
Signed-Off-By: Nathan Scott <nscott@aconex.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
After filesystem recovery the superblock is re-read to bring in any
changes. If the per-cpu superblock counters are not re-initialized from
the superblock then the next time the per-cpu counters are disabled they
might overwrite the global counter with a bogus value.
SGI-PV: 957348
SGI-Modid: xfs-linux-melb:xfs-kern:27999a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
SGI-PV: 956323
SGI-Modid: xfs-linux-melb:xfs-kern:27940a
Signed-off-by: Kevin Jamieson <kjamieson@bycast.com>
Signed-off-by: David Chatterton <chatz@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
The block reservation mechanism has been broken since the per-cpu
superblock counters were introduced. Make the block reservation code work
with the per-cpu counters by syncing the counters, snapshotting the amount
of available space and then doing a modifcation of the counter state
according to the result. Continue in a loop until we either have no space
available or we reserve some space.
SGI-PV: 956323
SGI-Modid: xfs-linux-melb:xfs-kern:27895a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
The free block modification code has a 32bit interface, limiting the size
the filesystem can be grown even on 64 bit machines. On 32 bit machines,
there are other 32bit variables in transaction structures and interfaces
that need to be expanded to allow this to work.
SGI-PV: 959978
SGI-Modid: xfs-linux-melb:xfs-kern:27894a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
The existing per-cpu superblock counter code uses the global superblock
spin lock when we approach ENOSPC for global synchronisation. On larger
machines than this code was originally tested on this can still get
catastrophic spinlock contention due increasing rebalance frequency near
ENOSPC.
By introducing a sleeping lock that is used to serialise balances and
modifications near ENOSPC we prevent contention from needlessly from
wasting the CPU time of potentially hundreds of CPUs.
To reduce the number of balances occuring, we separate the need rebalance
case from the slow allocate case. Now, a counter running dry will trigger
a rebalance during which counters are disabled. Any thread that sees a
disabled counter enters a different path where it waits on the new mutex.
When it gets the new mutex, it checks if the counter is disabled. If the
counter is disabled, then we _know_ that we have to use the global counter
and lock and it is safe to do so immediately. Otherwise, we drop the mutex
and go back to trying the per-cpu counters which we know were re-enabled.
SGI-PV: 952227
SGI-Modid: xfs-linux-melb:xfs-kern:27612a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
the range spanned by modifications to the in-core extent map. Add
XFS_BUNMAPI() and XFS_SWAP_EXTENTS() macros that call xfs_bunmapi() and
xfs_swap_extents() via the ioops vector. Change all calls that may modify
the in-core extent map for the data fork to go through the ioops vector.
This allows a cache of extent map data to be kept in sync.
SGI-PV: 947615
SGI-Modid: xfs-linux-melb:xfs-kern:209226a
Signed-off-by: Olaf Weber <olaf@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
a preēmpt counter overflow at 256p and above. Change the exclusion
mechanism to use atomic bit operations and busy wait loops to emulate the
spin lock exclusion mechanism but without the preempt count issues.
SGI-PV: 950027
SGI-Modid: xfs-linux-melb:xfs-kern:25338a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
registering a notifier callback that listens to CPU up/down events to
modify the counters appropriately.
SGI-PV: 949726
SGI-Modid: xfs-linux-melb:xfs-kern:25214a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
threads, the incore superblock lock becomes the limiting factor for
buffered write throughput. Make the contended fields in the incore
superblock use per-cpu counters so that there is no global lock to limit
scalability.
SGI-PV: 946630
SGI-Modid: xfs-linux-melb:xfs-kern:25106a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
actually use it. Kill this dead code. Signed-off-by: Christoph Hellwig
<hch@lst.de>
SGI-PV: 904196
SGI-Modid: xfs-linux-melb:xfs-kern:25086a
Signed-off-by: Nathan Scott <nathans@sgi.com>
This patch switches XFS over to use the new mutex code directly as
opposed to the previous workaround patch I posted earlier that avoided
the namespace clash by forcing it back to semaphores. This falls in the
'works for me<tm>' category.
Signed-off-by: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
the data/attr forks now grow up/down from either end of the literal area,
rather than dividing the literal area into two chunks and growing both
upward. Means we can now make much more efficient use of the attribute
space, incl. fitting DMF attributes inline in 256 byte inodes, and large
jumps in dbench3 performance numbers. It is self enabling, but can be
forced on/off via the attr2/noattr2 mount options.
SGI-PV: 941645
SGI-Modid: xfs-linux:xfs-kern:23837a
Signed-off-by: Nathan Scott <nathans@sgi.com>
filesystems to expose the filesystem stripe width in stat(2) rather than
the page cache size. This allows applications requiring high bandwidth to
easily determine the optimum I/O size for the underlying filesystem. The
default is to report the page cache size (i.e. "nolargeio").
SGI-PV: 942818
SGI-Modid: xfs-linux:xfs-kern:23830a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
writes. In addition flush the disk cache on fsync if the sync cached
operation didn't sync the log to disk (this requires some additional
bookeping in the transaction and log code). If the device doesn't claim to
support barriers, the filesystem has an extern log volume or the trial
superblock write with barriers enabled failed we disable barriers and
print a warning. We should probably fail the mount completely, but that
could lead to nasty boot failures for the root filesystem. Not enabled by
default yet, needs more destructive testing first.
SGI-PV: 912426
SGI-Modid: xfs-linux:xfs-kern:198723a
Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
