Noticed failure as a crash on ia64 when tried to symbolize all backtraces
collected by page_owner=on:
$ cat /sys/kernel/debug/page_owner
<oops>
CPU: 1 PID: 2074 Comm: cat Not tainted 5.12.0-rc4 #226
Hardware name: hp server rx3600, BIOS 04.03 04/08/2008
ip is at dereference_module_function_descriptor+0x41/0x100
Crash happens at dereference_module_function_descriptor() due to
use-after-free when dereferencing ".opd" section header.
All section headers are already freed after module is laoded successfully.
To keep symbolizer working the change stores ".opd" address and size after
module is relocated to a new place and before section headers are
discarded.
To make similar errors less obscure module_finalize() now zeroes out all
variables relevant to module loading only.
Link: https://lkml.kernel.org/r/20210403074803.3309096-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
At least ia64_mca_log_sal_error_record() expects some statement:
static void ia64_mca_log_sal_error_record(int sal_info_type)
{
...
if (irq_safe)
IA64_MCA_DEBUG("CPU %d: SAL log contains %s error record
",
smp_processor_id(),
sal_info_type < ARRAY_SIZE(rec_name) ? rec_name[sal_info_type] : "UNKNOWN");
...
}
Instead of fixing all callers the change expicitly makes IA64_MCA_DEBUG
a non-empty expression.
Link: https://lkml.kernel.org/r/20210328215549.830420-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When enabled local debugging via `#define EFI_DEBUG 1` noticed build
failure:
arch/ia64/kernel/efi.c:564:8: error: 'i' undeclared (first use in this function)
While at it fixed benign string format mismatches visible only when
EFI_DEBUG is enabled:
arch/ia64/kernel/efi.c:589:11:
warning: format '%lx' expects argument of type 'long unsigned int',
but argument 5 has type 'u64' {aka 'long long unsigned int'} [-Wformat=]
Link: https://lkml.kernel.org/r/20210328212246.685601-1-slyfox@gentoo.org
Fixes: 14fb420909 ("efi: Merge EFI system table revision and vendor checks")
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Paul reported a warning about bogus NUMA distance values spurred by
commit:
620a6dc407 ("sched/topology: Make sched_init_numa() use a set for the deduplicating sort")
In this case, the afflicted machine comes up with a reported 256 possible
nodes, all of which are 0 distance away from one another. This was
previously silently ignored, but is now caught by the aforementioned
commit.
The culprit is ia64's node_possible_map which remains unchanged from its
initialization value of NODE_MASK_ALL. In John's case, the machine
doesn't have any SRAT nor SLIT table, but AIUI the possible map remains
untouched regardless of what ACPI tables end up being parsed. Thus,
!online && possible nodes remain with a bogus distance of 0 (distances \in
[0, 9] are "reserved and have no meaning" as per the ACPI spec).
Follow x86 / drivers/base/arch_numa's example and set the possible map to
the parsed map, which in this case seems to be the online map.
Link: http://lore.kernel.org/r/255d6b5d-194e-eb0e-ecdd-97477a534441@physik.fu-berlin.de
Link: https://lkml.kernel.org/r/20210318130617.896309-1-valentin.schneider@arm.com
Fixes: 620a6dc407 ("sched/topology: Make sched_init_numa() use a set for the deduplicating sort")
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Sergei Trofimovich <slyfox@gentoo.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When loading a device-mapper table for a request-based mapped device,
and the allocation/initialization of the blk_mq_tag_set for the device
fails, a following device remove will cause a double free.
E.g. (dmesg):
device-mapper: core: Cannot initialize queue for request-based dm-mq mapped device
device-mapper: ioctl: unable to set up device queue for new table.
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0305e098835de000 TEID: 0305e098835de803
Fault in home space mode while using kernel ASCE.
AS:000000025efe0007 R3:0000000000000024
Oops: 0038 ilc:3 [#1] SMP
Modules linked in: ... lots of modules ...
Supported: Yes, External
CPU: 0 PID: 7348 Comm: multipathd Kdump: loaded Tainted: G W X 5.3.18-53-default #1 SLE15-SP3
Hardware name: IBM 8561 T01 7I2 (LPAR)
Krnl PSW : 0704e00180000000 000000025e368eca (kfree+0x42/0x330)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 000000000000004a 000000025efe5230 c1773200d779968d 0000000000000000
000000025e520270 000000025e8d1b40 0000000000000003 00000007aae10000
000000025e5202a2 0000000000000001 c1773200d779968d 0305e098835de640
00000007a8170000 000003ff80138650 000000025e5202a2 000003e00396faa8
Krnl Code: 000000025e368eb8: c4180041e100 lgrl %r1,25eba50b8
000000025e368ebe: ecba06b93a55 risbg %r11,%r10,6,185,58
#000000025e368ec4: e3b010000008 ag %r11,0(%r1)
>000000025e368eca: e310b0080004 lg %r1,8(%r11)
000000025e368ed0: a7110001 tmll %r1,1
000000025e368ed4: a7740129 brc 7,25e369126
000000025e368ed8: e320b0080004 lg %r2,8(%r11)
000000025e368ede: b904001b lgr %r1,%r11
Call Trace:
[<000000025e368eca>] kfree+0x42/0x330
[<000000025e5202a2>] blk_mq_free_tag_set+0x72/0xb8
[<000003ff801316a8>] dm_mq_cleanup_mapped_device+0x38/0x50 [dm_mod]
[<000003ff80120082>] free_dev+0x52/0xd0 [dm_mod]
[<000003ff801233f0>] __dm_destroy+0x150/0x1d0 [dm_mod]
[<000003ff8012bb9a>] dev_remove+0x162/0x1c0 [dm_mod]
[<000003ff8012a988>] ctl_ioctl+0x198/0x478 [dm_mod]
[<000003ff8012ac8a>] dm_ctl_ioctl+0x22/0x38 [dm_mod]
[<000000025e3b11ee>] ksys_ioctl+0xbe/0xe0
[<000000025e3b127a>] __s390x_sys_ioctl+0x2a/0x40
[<000000025e8c15ac>] system_call+0xd8/0x2c8
Last Breaking-Event-Address:
[<000000025e52029c>] blk_mq_free_tag_set+0x6c/0xb8
Kernel panic - not syncing: Fatal exception: panic_on_oops
When allocation/initialization of the blk_mq_tag_set fails in
dm_mq_init_request_queue(), it is uninitialized/freed, but the pointer
is not reset to NULL; so when dev_remove() later gets into
dm_mq_cleanup_mapped_device() it sees the pointer and tries to
uninitialize and free it again.
Fix this by setting the pointer to NULL in dm_mq_init_request_queue()
error-handling. Also set it to NULL in dm_mq_cleanup_mapped_device().
Cc: <stable@vger.kernel.org> # 4.6+
Fixes: 1c357a1e86 ("dm: allocate blk_mq_tag_set rather than embed in mapped_device")
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If we have discard support we don't have to recalculate hash - we can
just fill the metadata with the discard pattern.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Increase RECALC_SECTORS because it improves recalculate speed slightly
(from 390kiB/s to 410kiB/s).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If we discard already discarded blocks we do not need to write discard
pattern to the metadata, because it is already there.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
We do not currently document the requirements for configuration of the
SVE system registers when booting the kernel, let's do so for completeness.
We don't have a hard requirement that the vector lengths configured on
different CPUs on initial boot be consistent since we have logic to
constrain to the minimum supported value but we will reject any late CPUs
which can't support the current maximum and introducing the concept of
late CPUs seemed more complex than was useful so we require that all CPUs
use the same value.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210412151955.16078-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we require that a number of system registers be configured to
disable traps when starting the kernel. Add an explicit note that the
requirement is that the system behave as if the traps are disabled so
transparent handling of the traps is fine, this should be implicit for
people familiar with working with standards documents but it doesn't hurt
to be explicit.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210412151955.16078-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
It was reported that a fix to the ring buffer recursion detection would
cause a hung machine when performing suspend / resume testing. The
following backtrace was extracted from debugging that case:
Call Trace:
trace_clock_global+0x91/0xa0
__rb_reserve_next+0x237/0x460
ring_buffer_lock_reserve+0x12a/0x3f0
trace_buffer_lock_reserve+0x10/0x50
__trace_graph_return+0x1f/0x80
trace_graph_return+0xb7/0xf0
? trace_clock_global+0x91/0xa0
ftrace_return_to_handler+0x8b/0xf0
? pv_hash+0xa0/0xa0
return_to_handler+0x15/0x30
? ftrace_graph_caller+0xa0/0xa0
? trace_clock_global+0x91/0xa0
? __rb_reserve_next+0x237/0x460
? ring_buffer_lock_reserve+0x12a/0x3f0
? trace_event_buffer_lock_reserve+0x3c/0x120
? trace_event_buffer_reserve+0x6b/0xc0
? trace_event_raw_event_device_pm_callback_start+0x125/0x2d0
? dpm_run_callback+0x3b/0xc0
? pm_ops_is_empty+0x50/0x50
? platform_get_irq_byname_optional+0x90/0x90
? trace_device_pm_callback_start+0x82/0xd0
? dpm_run_callback+0x49/0xc0
With the following RIP:
RIP: 0010:native_queued_spin_lock_slowpath+0x69/0x200
Since the fix to the recursion detection would allow a single recursion to
happen while tracing, this lead to the trace_clock_global() taking a spin
lock and then trying to take it again:
ring_buffer_lock_reserve() {
trace_clock_global() {
arch_spin_lock() {
queued_spin_lock_slowpath() {
/* lock taken */
(something else gets traced by function graph tracer)
ring_buffer_lock_reserve() {
trace_clock_global() {
arch_spin_lock() {
queued_spin_lock_slowpath() {
/* DEAD LOCK! */
Tracing should *never* block, as it can lead to strange lockups like the
above.
Restructure the trace_clock_global() code to instead of simply taking a
lock to update the recorded "prev_time" simply use it, as two events
happening on two different CPUs that calls this at the same time, really
doesn't matter which one goes first. Use a trylock to grab the lock for
updating the prev_time, and if it fails, simply try again the next time.
If it failed to be taken, that means something else is already updating
it.
Link: https://lkml.kernel.org/r/20210430121758.650b6e8a@gandalf.local.home
Cc: stable@vger.kernel.org
Tested-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Fixes: b02414c8f0 ("ring-buffer: Fix recursion protection transitions between interrupt context") # started showing the problem
Fixes: 14131f2f98 ("tracing: implement trace_clock_*() APIs") # where the bug happened
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212761
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The BPF program for the snprintf selftest runs on all syscall entries.
On busy multicore systems this can cause concurrency issues.
For example it was observed that sometimes the userspace part of the
test reads " 4 0000" instead of " 4 000" (extra '0' at the end)
which seems to happen just before snprintf on another core sets
end[-1] = '\0'.
This patch adds a pid filter to the test to ensure that no
bpf_snprintf() will write over the test's output buffers while the
userspace reads the values.
Fixes: c2e39c6bdc ("selftests/bpf: Add a series of tests for bpf_snprintf")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210428152501.1024509-1-revest@chromium.org
We removed the terminal frame records in commit:
6106e1112c ("arm64: remove EL0 exception frame record")
... on the assumption that as we no longer used them to find the pt_regs
at exception boundaries, they were no longer necessary.
However, Leo reports that as an unintended side-effect, this causes
traces which cross secondary_start_kernel to terminate one entry too
late, with a spurious "0" entry.
There are a few ways we could sovle this, but as we're planning to use
terminal records for RELIABLE_STACKTRACE, let's revert the logic change
for now, keeping the update comments and accounting for the changes in
commit:
3c02600144 ("arm64: stacktrace: Report when we reach the end of the stack")
This is effectively a partial revert of commit:
6106e1112c ("arm64: remove EL0 exception frame record")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 6106e1112c ("arm64: remove EL0 exception frame record")
Reported-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Madhavan T. Venkataraman" <madvenka@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210429104813.GA33550@C02TD0UTHF1T.local
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The arm64 assembler in binutils 2.32 and above generates a program
property note in a note section, .note.gnu.property, to encode used x86
ISAs and features. But the kernel linker script only contains a single
NOTE segment:
PHDRS
{
text PT_LOAD FLAGS(5) FILEHDR PHDRS; /* PF_R|PF_X */
dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
note PT_NOTE FLAGS(4); /* PF_R */
}
The NOTE segment generated by the vDSO linker script is aligned to 4 bytes.
But the .note.gnu.property section must be aligned to 8 bytes on arm64.
$ readelf -n vdso64.so
Displaying notes found in: .note
Owner Data size Description
Linux 0x00000004 Unknown note type: (0x00000000)
description data: 06 00 00 00
readelf: Warning: note with invalid namesz and/or descsz found at offset 0x20
readelf: Warning: type: 0x78, namesize: 0x00000100, descsize: 0x756e694c, alignment: 8
Since the note.gnu.property section in the vDSO is not checked by the
dynamic linker, discard the .note.gnu.property sections in the vDSO.
Similar to commit 4caffe6a28 ("x86/vdso: Discard .note.gnu.property
sections in vDSO"), but for arm64.
Signed-off-by: Bill Wendling <morbo@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210423205159.830854-1-morbo@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This adds support for adding a random offset to the stack while handling
syscalls. The patch uses get_tod_clock_fast() as this is considered good
enough and has much less performance penalty compared to using
get_random_int(). The patch also adds randomization in pgm_check_handler()
as the sigreturn/rt_sigreturn system calls might be called from there.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/r/20210429091451.1062594-1-svens@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
In former times, the virtio-console code had to be compiled into
the kernel since the old guest virtio transport had some hard de-
pendencies. But since the old virtio transport has been removed in
commit 7fb2b2d512 ("s390/virtio: remove the old KVM virtio transport"),
we do not have this limitation anymore.
Commit bb533ec8ba ("s390/config: do not select VIRTIO_CONSOLE via
Kconfig") then also lifted the hard setting in the Kconfig system, so
we can finally switch the CONFIG_VIRTIO_CONSOLE knob to compile this
driver as a module now, making it more flexible for the user to only
load it if it is really required.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20210428082442.321327-1-thuth@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The function cpumf_pmu_add and cpumf_pmu_del call function
perf_event_update_userpage(). This calls is obsolete, the calls add and
delete a counter event. Counter events do not sample data and the
event->rb member to access the sampling ring buffer is always NULL.
The function perf_event_update_userpage() simply returns in this case.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by : Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The function to calculate the size of counter sets is renamed from
cf_diag_ctrset_size() to cpum_cf_ctrset_size() and moved to the file
containing common functions for the CPU Measurement Counter Facility.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by : Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Beautify if-then-else indentation to match coding guideline.
Also use shorter pointer notation hwc instead of event->hw.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by : Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
All major distributions ship with CONFIG_PCI_IOV=y so let us enable it
for our defconfigs as well.
Note also that since commit e5794cf1a2 ("s390/pci: create links
between PFs and VFs") we enabled proper linking between PFs and their
associated VFs so with this commit and its fixes applied we can fully
support handling SR-IOV enabled PFs.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The PCIs event with PEC 0x0303 or 0x0304 are a request to deconfigure
a PCI function, respectively an indication that it was already
deconfigured by the platform. If such an event is queued during boot it
may happen that the platform has already adjusted the configuration flag
of the relevant function in the CLP List PCI Functions result. In this
case we might not have configured the PCI function at all and should
thus ignore the event. Note that no locking is necessary as event
handling only starts after we have fully initialized the zPCI subsystem
and scanned all PCI devices listed in the CLP result.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
With zpci_configure_device() now always called on a device that has
already been configured on the platform level its name has become
misleading. Rename it to zpci_scan_configured_device() to signify that
the function now only handles the correct scanning of a newly configured
PCI function taking care of the special handling necessary for function
0 and functions parked waiting for a PCI bus that can't be created
without first seeing function 0.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Revert commit 4b9ee772ea ("ACPI: scan: Turn off unused power
resources during initialization") that is reported to cause
initialization issues to occur.
Reported-by: Shujun Wang <wsj20369@163.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Query like 'file tcp_input.c line 1234 +p' was broken by
commit aaebe329bf ("dyndbg: accept 'file foo.c:func1' and 'file
foo.c:10-100'") because a file name without a ':' now makes the loop in
ddebug_parse_query() exits early before parsing the 'line 1234' part.
As a result, all pr_debug() in tcp_input.c will be enabled, instead of only
the one on line 1234. Changing 'break' to 'continue' fixes this.
Fixes: aaebe329bf ("dyndbg: accept 'file foo.c:func1' and 'file foo.c:10-100'")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Shuo Chen <shuochen@google.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Link: https://lore.kernel.org/r/20210414212400.2927281-1-giantchen@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drm/tegra: Changes for v5.13-rc1
The changes this time around contain a couple of fixes for host1x along
with some improvements for Tegra DRM. Most notably the Tegra DRM driver
now supports the hardware cursor on Tegra186 and later, more correctly
reflects the capabilities of the display pipelines on various Tegra SoC
generations and knows how to deal with the dGPU sector layout by using
framebuffer modifiers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401164430.3349105-1-thierry.reding@gmail.com
ksz_switch_alloc() will return NULL only if allocation is failed. So,
the proper return value is -ENOMEM.
Fixes: 60a3647600 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix possible NULL pointer dereference in case devm_kzalloc() failed to
allocate memory
Fixes: cc13e52c3a ("net: dsa: microchip: Add Microchip KSZ8863 SPI based driver support")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix possible NULL pointer dereference in case devm_kzalloc() failed to
allocate memory.
Fixes: 60a3647600 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable 'err' is set to -EIO but this value is never read as it is
overwritten with a new value later on, hence it is a redundant
assignment and can be removed.
Clean up the following clang-analyzer warning:
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1195:2: warning: Value
stored to 'err' is never read [clang-analyzer-deadcode.DeadStores]
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Variable queue is set to bp->queues but these values is not used as it
is overwritten later on, hence redundant assignment can be removed.
Cleans up the following clang-analyzer warning:
drivers/net/ethernet/cadence/macb_main.c:4919:21: warning: Value stored
to 'queue' during its initialization is never read
[clang-analyzer-deadcode.DeadStores].
drivers/net/ethernet/cadence/macb_main.c:4832:21: warning: Value stored
to 'queue' during its initialization is never read
[clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
His email bounces with permanent error "550 Invalid recipient". His last
email was from 2020-09-09 on the LKML and he seems to have left TI.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
