It turns out that linux uses si_trapno very sparingly, and as such it
can be considered extra information for a very narrow selection of
signals, rather than information that is present with every fault
reported in siginfo.
As such move si_trapno inside the union inside of _si_fault. This
results in no change in placement, and makes it eaiser
to extend _si_fault in the future as this reduces the number of
special cases. In particular with si_trapno included in the union it
is no longer a concern that the union must be pointer aligned on most
architectures because the union follows immediately after si_addr
which is a pointer.
This change results in a difference in siginfo field placement on
sparc and alpha for the fields si_addr_lsb, si_lower, si_upper,
si_pkey, and si_perf. These architectures do not implement the
signals that would use si_addr_lsb, si_lower, si_upper, si_pkey, and
si_perf. Further these architecture have not yet implemented the
userspace that would use si_perf.
The point of this change is in fact to correct these placement issues
before sparc or alpha grow userspace that cares. This change was
discussed[1] and the agreement is that this change is currently safe.
[1]: https://lkml.kernel.org/r/CAK8P3a0+uKYwL1NhY6Hvtieghba2hKYGD6hcKx5n8=4Gtt+pHA@mail.gmail.com
Acked-by: Marco Elver <elver@google.com>
v1: https://lkml.kernel.org/r/m1tunns7yf.fsf_-_@fess.ebiederm.org
v2: https://lkml.kernel.org/r/20210505141101.11519-5-ebiederm@xmission.com
Link: https://lkml.kernel.org/r/20210517195748.8880-1-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Similar to the way in which of_mdiobus_register() has a fallback to the
non-DT based mdiobus_register() when CONFIG_OF is not set, we can create
a shim for the device-managed devm_of_mdiobus_register() which calls
devm_mdiobus_register() and discards the struct device_node *.
In particular, this solves a build issue with the qca8k DSA driver which
uses devm_of_mdiobus_register and can be compiled without CONFIG_OF.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The list_head dcb_app_list is initialized statically.
It is unnecessary to initialize by INIT_LIST_HEAD().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using list_del_init() instead of list_del() + INIT_LIST_HEAD()
to simpify the code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang says:
====================
net: wan: clean up some code style issues
This patchset clean up some code style issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add space required before the open parenthesis '(',
and add spaces required around that '<', '>' and '!='.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan says:
====================
net: hns3: fixes for -net
This series includes some bugfixes for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently skb_checksum_help()'s return is ignored, but it may
return error when it fails to allocate memory when linearizing.
So adds checking for the return of skb_checksum_help().
Fixes: 76ad4f0ee747("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Fixes: 3db084d28dc0("net: hns3: Fix for vxlan tx checksum bug")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when adaptive is on, the user's coalesce configuration
may be overwritten by the dynamic one. The reason is that user's
configurations are saved in struct hns3_enet_tqp_vector whose
value maybe changed by the dynamic algorithm. To fix it, use
struct hns3_nic_priv instead of struct hns3_enet_tqp_vector to
save and get the user's configuration.
BTW, operations of storing and restoring coalesce info in the reset
process are unnecessary now, so remove them as well.
Fixes: 434776a5fa ("net: hns3: add ethtool_ops.set_coalesce support to PF")
Fixes: 7e96adc466 ("net: hns3: add ethtool_ops.get_coalesce support to PF")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In hclge_mbx_handler(), if there are two consecutive mailbox
messages that requires resp_msg, the resp_msg is not cleared
after processing the first message, which will cause the resp_msg
data of second message incorrect.
Fix it by clearing the resp_msg before processing every mailbox
message.
Fixes: bb5790b71b ("net: hns3: refactor mailbox response scheme between PF and VF")
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the missing unlock before return from function qca8k_vlan_add()
and qca8k_vlan_del() in the error handling case.
Fixes: 028f5f8ef4 ("net: dsa: qca8k: handle error with qca8k_read operation")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
lan78xx already calls skb_tx_timestamp() in its lan78xx_start_xmit().
Override .get_ts_info to also advertise this capability
(SOF_TIMESTAMPING_TX_SOFTWARE) via ethtool.
Signed-off-by: Markus Blöchl <markus.bloechl@ipetronik.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since cipso_v4_cache_invalidate() has no return value, so drop
related descriptions in its comments.
Fixes: 446fda4f26 ("[NetLabel]: CIPSOv4 engine")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
Add support for custom multipath hash
This patchset adds support for custom multipath hash policy for both
IPv4 and IPv6 traffic. The new policy allows user space to control the
outer and inner packet fields used for the hash computation.
Motivation
==========
Linux currently supports different multipath hash policies for IPv4 and
IPv6 traffic:
* Layer 3
* Layer 4
* Layer 3 or inner layer 3, if present
These policies hash on a fixed set of fields, which is inflexible and
against operators' requirements to control the hash input: "The ability
to control the inputs to the hash function should be a consideration in
any load-balancing RFP" [1].
An example of this inflexibility can be seen by the fact that none of
the current policies allows operators to use the standard 5-tuple and
the flow label for multipath hash computation. Such a policy is useful
in the following real-world example of a data center with the following
types of traffic:
* Anycast IPv6 TCP traffic towards layer 4 load balancers. Flow label is
constant (zero) to avoid breaking established connections
* Non-encapsulated IPv6 traffic. Flow label is used to re-route flows
around problematic (congested / failed) paths [2]
* IPv6 encapsulated traffic (IPv4-in-IPv6 or IPv6-in-IPv6). Outer flow
label is generated from encapsulated packet
* UDP encapsulated traffic. Outer source port is generated from
encapsulated packet
In the above example, using the inner flow information for hash
computation in addition to the outer flow information is useful during
failures of the BPF agent that selectively generates the flow label
based on the traffic type. In such cases, the self-healing properties of
the flow label are lost, but encapsulated flows are still load balanced.
Control over the inner fields is even more critical when encapsulation
is performed by hardware routers. For example, the Spectrum ASIC can
only encode 8 bits of entropy in the outer flow label / outer UDP source
port when performing IP / UDP encapsulation. In the case of IPv4 GRE
encapsulation there is no outer field to encode the inner hash in.
User interface
==============
In accordance with existing multipath hash configuration, the new custom
policy is added as a new option (3) to the
net.ipv{4,6}.fib_multipath_hash_policy sysctls. When the new policy is
used, the packet fields used for hash computation are determined by the
net.ipv{4,6}.fib_multipath_hash_fields sysctls. These sysctls accept a
bitmask according to the following table (from ip-sysctl.rst):
====== ============================
0x0001 Source IP address
0x0002 Destination IP address
0x0004 IP protocol
0x0008 Flow Label
0x0010 Source port
0x0020 Destination port
0x0040 Inner source IP address
0x0080 Inner destination IP address
0x0100 Inner IP protocol
0x0200 Inner Flow Label
0x0400 Inner source port
0x0800 Inner destination port
====== ============================
For example, to allow IPv6 traffic to be hashed based on standard
5-tuple and flow label:
# sysctl -wq net.ipv6.fib_multipath_hash_fields=0x0037
# sysctl -wq net.ipv6.fib_multipath_hash_policy=3
Implementation
==============
As with existing policies, the new policy relies on the flow dissector
to extract the packet fields for the hash computation. However, unlike
existing policies that either use the outer or inner flow, the new
policy might require both flows to be dissected.
To avoid unnecessary invocations of the flow dissector, the data path
skips dissection of the outer or inner flows if none of the outer or
inner fields are required.
In addition, inner flow dissection is not performed when no
encapsulation was encountered (i.e., 'FLOW_DIS_ENCAPSULATION' not set by
flow dissector) during dissection of the outer flow.
Testing
=======
Three new selftests are added with three different topologies that allow
testing of following traffic combinations:
* Non-encapsulated IPv4 / IPv6 traffic
* IPv4 / IPv6 overlay over IPv4 underlay
* IPv4 / IPv6 overlay over IPv6 underlay
All three tests follow the same pattern. Each time a different packet
field is used for hash computation. When the field changes in the packet
stream, traffic is expected to be balanced across the two paths. When
the field does not change, traffic is expected to be unbalanced across
the two paths.
Patchset overview
=================
Patches #1-#3 add custom multipath hash support for IPv4 traffic
Patches #4-#7 do the same for IPv6
Patches #8-#10 add selftests
Future work
===========
mlxsw support can be found here [3].
Changes since RFC v2 [4]:
* Patch #2: Document that 0x0008 is used for Flow Label
* Patch #2: Do not allow the bitmask to be zero
* Patch #6: Do not allow the bitmask to be zero
Changes since RFC v1 [5]:
* Use a bitmask instead of a bitmap
[1] https://blog.apnic.net/2018/01/11/ipv6-flow-label-misuse-hashing/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=3acf3ec3f4b0fd4263989f2e4227bbd1c42b5fe1
[3] https://github.com/idosch/linux/tree/submit/custom_hash_mlxsw_v2
[4] https://lore.kernel.org/netdev/20210509151615.200608-1-idosch@idosch.org/
[5] https://lore.kernel.org/netdev/20210502162257.3472453-1-idosch@idosch.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when the hash policy is set to custom, traffic is distributed
only according to the inner fields set in the fib_multipath_hash_fields
sysctl.
Each time set a different field and make sure traffic is only
distributed when the field is changed in the packet stream.
The test only verifies the behavior of IPv4/IPv6 overlays on top of an
IPv6 underlay network. The previous patch verified the same with an IPv4
underlay network.
Example output:
# ./ip6gre_custom_multipath_hash.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
INFO: Running IPv4 overlay custom multipath hash tests
TEST: Multipath hash field: Inner source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6602 / 6002
TEST: Multipath hash field: Inner source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 1 / 12601
TEST: Multipath hash field: Inner destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6802 / 5801
TEST: Multipath hash field: Inner destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12602 / 3
TEST: Multipath hash field: Inner source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16431 / 16344
TEST: Multipath hash field: Inner source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 32773
TEST: Multipath hash field: Inner destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16431 / 16344
TEST: Multipath hash field: Inner destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 2 / 32772
INFO: Running IPv6 overlay custom multipath hash tests
TEST: Multipath hash field: Inner source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6704 / 5902
TEST: Multipath hash field: Inner source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 1 / 12600
TEST: Multipath hash field: Inner destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 5751 / 6852
TEST: Multipath hash field: Inner destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12602 / 0
TEST: Multipath hash field: Inner flowlabel (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 8272 / 8181
TEST: Multipath hash field: Inner flowlabel (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 3 / 12602
TEST: Multipath hash field: Inner source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16424 / 16351
TEST: Multipath hash field: Inner source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 3 / 32774
TEST: Multipath hash field: Inner destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16425 / 16350
TEST: Multipath hash field: Inner destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 2 / 32773
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when the hash policy is set to custom, traffic is distributed
only according to the inner fields set in the fib_multipath_hash_fields
sysctl.
Each time set a different field and make sure traffic is only
distributed when the field is changed in the packet stream.
The test only verifies the behavior of IPv4/IPv6 overlays on top of an
IPv4 underlay network. A subsequent patch will do the same with an IPv6
underlay network.
Example output:
# ./gre_custom_multipath_hash.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
INFO: Running IPv4 overlay custom multipath hash tests
TEST: Multipath hash field: Inner source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6601 / 6001
TEST: Multipath hash field: Inner source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 12600
TEST: Multipath hash field: Inner destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6802 / 5802
TEST: Multipath hash field: Inner destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12601 / 1
TEST: Multipath hash field: Inner source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16430 / 16344
TEST: Multipath hash field: Inner source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 32772
TEST: Multipath hash field: Inner destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16430 / 16343
TEST: Multipath hash field: Inner destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 32772
INFO: Running IPv6 overlay custom multipath hash tests
TEST: Multipath hash field: Inner source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6702 / 5900
TEST: Multipath hash field: Inner source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 12601
TEST: Multipath hash field: Inner destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 5751 / 6851
TEST: Multipath hash field: Inner destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12602 / 1
TEST: Multipath hash field: Inner flowlabel (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 8364 / 8065
TEST: Multipath hash field: Inner flowlabel (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12601 / 0
TEST: Multipath hash field: Inner source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16425 / 16349
TEST: Multipath hash field: Inner source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 1 / 32770
TEST: Multipath hash field: Inner destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16425 / 16349
TEST: Multipath hash field: Inner destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 2 / 32770
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when the hash policy is set to custom, traffic is distributed
only according to the outer fields set in the fib_multipath_hash_fields
sysctl.
Each time set a different field and make sure traffic is only
distributed when the field is changed in the packet stream.
The test only verifies the behavior with non-encapsulated IPv4 and IPv6
packets. Subsequent patches will add tests for IPv4/IPv6 overlays on top
of IPv4/IPv6 underlay networks.
Example output:
# ./custom_multipath_hash.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
INFO: Running IPv4 custom multipath hash tests
TEST: Multipath hash field: Source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6353 / 6254
TEST: Multipath hash field: Source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 12600
TEST: Multipath hash field: Destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6102 / 6502
TEST: Multipath hash field: Destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 1 / 12601
TEST: Multipath hash field: Source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16428 / 16345
TEST: Multipath hash field: Source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 32770 / 2
TEST: Multipath hash field: Destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16428 / 16345
TEST: Multipath hash field: Destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 32770 / 2
INFO: Running IPv6 custom multipath hash tests
TEST: Multipath hash field: Source IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 6704 / 5903
TEST: Multipath hash field: Source IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12600 / 0
TEST: Multipath hash field: Destination IP (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 5551 / 7052
TEST: Multipath hash field: Destination IP (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 12603 / 0
TEST: Multipath hash field: Flowlabel (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 8378 / 8080
TEST: Multipath hash field: Flowlabel (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 2 / 12603
TEST: Multipath hash field: Source port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16385 / 16388
TEST: Multipath hash field: Source port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 0 / 32774
TEST: Multipath hash field: Destination port (balanced) [ OK ]
INFO: Packets sent on path1 / path2: 16386 / 16390
TEST: Multipath hash field: Destination port (unbalanced) [ OK ]
INFO: Packets sent on path1 / path2: 32771 / 2
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new multipath hash policy where the packet fields used for hash
calculation are determined by user space via the
fib_multipath_hash_fields sysctl that was introduced in the previous
patch.
The current set of available packet fields includes both outer and inner
fields, which requires two invocations of the flow dissector. Avoid
unnecessary dissection of the outer or inner flows by skipping
dissection if none of the outer or inner fields are required.
In accordance with the existing policies, when an skb is not available,
packet fields are extracted from the provided flow key. In which case,
only outer fields are considered.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A subsequent patch will add a new multipath hash policy where the packet
fields used for multipath hash calculation are determined by user space.
This patch adds a sysctl that allows user space to set these fields.
The packet fields are represented using a bitmask and are common between
IPv4 and IPv6 to allow user space to use the same numbering across both
protocols. For example, to hash based on standard 5-tuple:
# sysctl -w net.ipv6.fib_multipath_hash_fields=0x0037
net.ipv6.fib_multipath_hash_fields = 0x0037
To avoid introducing holes in 'struct netns_sysctl_ipv6', move the
'bindv6only' field after the multipath hash fields.
The kernel rejects unknown fields, for example:
# sysctl -w net.ipv6.fib_multipath_hash_fields=0x1000
sysctl: setting key "net.ipv6.fib_multipath_hash_fields": Invalid argument
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A subsequent patch will add another multipath hash policy where the
multipath hash is calculated directly by the policy specific code and
not outside of the switch statement.
Prepare for this change by moving the multipath hash calculation inside
the switch statement.
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'out_timer' label was added in commit 63152fc0de ("[NETNS][IPV6]
ip6_fib - gc timer per namespace") when the timer was allocated on the
heap.
Commit 417f28bb34 ("netns: dont alloc ipv6 fib timer list") removed
the allocation, but kept the label name.
Rename it to a more suitable name.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new multipath hash policy where the packet fields used for hash
calculation are determined by user space via the
fib_multipath_hash_fields sysctl that was introduced in the previous
patch.
The current set of available packet fields includes both outer and inner
fields, which requires two invocations of the flow dissector. Avoid
unnecessary dissection of the outer or inner flows by skipping
dissection if none of the outer or inner fields are required.
In accordance with the existing policies, when an skb is not available,
packet fields are extracted from the provided flow key. In which case,
only outer fields are considered.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A subsequent patch will add a new multipath hash policy where the packet
fields used for multipath hash calculation are determined by user space.
This patch adds a sysctl that allows user space to set these fields.
The packet fields are represented using a bitmask and are common between
IPv4 and IPv6 to allow user space to use the same numbering across both
protocols. For example, to hash based on standard 5-tuple:
# sysctl -w net.ipv4.fib_multipath_hash_fields=0x0037
net.ipv4.fib_multipath_hash_fields = 0x0037
The kernel rejects unknown fields, for example:
# sysctl -w net.ipv4.fib_multipath_hash_fields=0x1000
sysctl: setting key "net.ipv4.fib_multipath_hash_fields": Invalid argument
More fields can be added in the future, if needed.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A subsequent patch will add another multipath hash policy where the
multipath hash is calculated directly by the policy specific code and
not outside of the switch statement.
Prepare for this change by moving the multipath hash calculation inside
the switch statement.
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to use "struct work_struct" for the finalize work queue
instead of "struct tipc_net_work", as it can get the "net" and "addr"
from tipc_net's other members and there is no need to add extra net
and addr in tipc_net by defining "struct tipc_net_work".
Note that it's safe to get net from tn->bcl as bcl is always released
after the finalize work queue is done.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the forwarding path GRO -> BPF 6 to 4 -> GSO for TCP traffic, the
coalesced packet payload can be > MSS, but < MSS + 20.
bpf_skb_proto_6_to_4() will upgrade the MSS and it can be > the payload
length. After then tcp_gso_segment checks for the payload length if it
is <= MSS. The condition is causing the packet to be dropped.
tcp_gso_segment():
[...]
mss = skb_shinfo(skb)->gso_size;
if (unlikely(skb->len <= mss))
goto out;
[...]
Allow to upgrade/downgrade MSS only when BPF_F_ADJ_ROOM_FIXED_GSO is
not set.
Signed-off-by: Dongseok Yi <dseok.yi@samsung.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/1620804453-57566-1-git-send-email-dseok.yi@samsung.com
clang with CONFIG_LTO_CLANG points out that an initcall function should
return an 'int' due to the changes made to the initcall macros in commit
3578ad11f3 ("init: lto: fix PREL32 relocations"):
kernel/kcsan/debugfs.c:274:15: error: returning 'void' from a function with incompatible result type 'int'
late_initcall(kcsan_debugfs_init);
~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
include/linux/init.h:292:46: note: expanded from macro 'late_initcall'
#define late_initcall(fn) __define_initcall(fn, 7)
Fixes: e36299efe7 ("kcsan, debugfs: Move debugfs file creation out of early init")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
restrack should only be attached to a cm_id while the ID has a valid
device pointer. It is set up when the device is first loaded, but not
cleared when the device is removed. There is also two copies of the device
pointer, one private and one in the public API, and these were left out of
sync.
Make everything go to NULL together and manipulate restrack right around
the device assignments.
Found by syzcaller:
BUG: KASAN: wild-memory-access in __list_del include/linux/list.h:112 [inline]
BUG: KASAN: wild-memory-access in __list_del_entry include/linux/list.h:135 [inline]
BUG: KASAN: wild-memory-access in list_del include/linux/list.h:146 [inline]
BUG: KASAN: wild-memory-access in cma_cancel_listens drivers/infiniband/core/cma.c:1767 [inline]
BUG: KASAN: wild-memory-access in cma_cancel_operation drivers/infiniband/core/cma.c:1795 [inline]
BUG: KASAN: wild-memory-access in cma_cancel_operation+0x1f4/0x4b0 drivers/infiniband/core/cma.c:1783
Write of size 8 at addr dead000000000108 by task syz-executor716/334
CPU: 0 PID: 334 Comm: syz-executor716 Not tainted 5.11.0+ #271
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0xbe/0xf9 lib/dump_stack.c:120
__kasan_report mm/kasan/report.c:400 [inline]
kasan_report.cold+0x5f/0xd5 mm/kasan/report.c:413
__list_del include/linux/list.h:112 [inline]
__list_del_entry include/linux/list.h:135 [inline]
list_del include/linux/list.h:146 [inline]
cma_cancel_listens drivers/infiniband/core/cma.c:1767 [inline]
cma_cancel_operation drivers/infiniband/core/cma.c:1795 [inline]
cma_cancel_operation+0x1f4/0x4b0 drivers/infiniband/core/cma.c:1783
_destroy_id+0x29/0x460 drivers/infiniband/core/cma.c:1862
ucma_close_id+0x36/0x50 drivers/infiniband/core/ucma.c:185
ucma_destroy_private_ctx+0x58d/0x5b0 drivers/infiniband/core/ucma.c:576
ucma_close+0x91/0xd0 drivers/infiniband/core/ucma.c:1797
__fput+0x169/0x540 fs/file_table.c:280
task_work_run+0xb7/0x100 kernel/task_work.c:140
exit_task_work include/linux/task_work.h:30 [inline]
do_exit+0x7da/0x17f0 kernel/exit.c:825
do_group_exit+0x9e/0x190 kernel/exit.c:922
__do_sys_exit_group kernel/exit.c:933 [inline]
__se_sys_exit_group kernel/exit.c:931 [inline]
__x64_sys_exit_group+0x2d/0x30 kernel/exit.c:931
do_syscall_64+0x2d/0x40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 255d0c14b3 ("RDMA/cma: rdma_bind_addr() leaks a cma_dev reference count")
Link: https://lore.kernel.org/r/3352ee288fe34f2b44220457a29bfc0548686363.1620711734.git.leonro@nvidia.com
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a interruptible mutex locker is interrupted by a signal
without acquiring this lock and removed from the wait queue.
if the mutex isn't contended enough to have a waiter
put into the wait queue again, the setting of the WAITER
bit will force mutex locker to go into the slowpath to
acquire the lock every time, so if the wait queue is empty,
the WAITER bit need to be clear.
Fixes: 040a0a3710 ("mutex: Add support for wound/wait style locks")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210517034005.30828-1-qiang.zhang@windriver.com
If the kernel is compiled with the CONFIG_LOCKDEP option, the conditional
might_sleep_if() deep in kmem_cache_alloc() will generate the following
trace, and potentially cause a deadlock when another LBR event is added:
[] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:196
[] Call Trace:
[] kmem_cache_alloc+0x36/0x250
[] intel_pmu_lbr_add+0x152/0x170
[] x86_pmu_add+0x83/0xd0
Make it symmetric with the release_lbr_buffers() call and mirror the
existing DS buffers.
Fixes: c085fb8774 ("perf/x86/intel/lbr: Support XSAVES for arch LBR read")
Signed-off-by: Like Xu <like.xu@linux.intel.com>
[peterz: simplified]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lkml.kernel.org/r/20210430052247.3079672-2-like.xu@linux.intel.com
The Architecture LBR does not have MSR_LBR_TOS (0x000001c9).
In a guest that should support Architecture LBR, check_msr()
will be a non-related check for the architecture MSR 0x0
(IA32_P5_MC_ADDR) that is also not supported by KVM.
The failure will cause x86_pmu.lbr_nr = 0, thereby preventing
the initialization of the guest Arch LBR. Fix it by avoiding
this extraneous check in intel_pmu_init() for Arch LBR.
Fixes: 47125db27e ("perf/x86/intel/lbr: Support Architectural LBR")
Signed-off-by: Like Xu <like.xu@linux.intel.com>
[peterz: simpler still]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210430052247.3079672-1-like.xu@linux.intel.com
ALSA dice driver detects jumbo payload at high sampling transfer frequency
for below models:
* Avid M-Box 3 Pro
* M-Audio Profire 610
* M-Audio Profire 2626
Although many DICE-based devices have a quirk at high sampling transfer
frequency to multiplex double number of PCM frames into data block than
the number in IEC 61883-1/6, the above devices are just compliant to
IEC 61883-1/6.
This commit disables the mode of double_pcm_frames for the models.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518012510.37126-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the VMGEXIT instruction can be issued from userspace, invalidate
the GHCB after performing VMGEXIT processing in the kernel.
Invalidation is only required after userspace is available, so call
vc_ghcb_invalidate() from sev_es_put_ghcb(). Update vc_ghcb_invalidate()
to additionally clear the GHCB exit code so that it is always presented
as 0 when VMGEXIT has been issued by anything else besides the kernel.
Fixes: 0786138c78 ("x86/sev-es: Add a Runtime #VC Exception Handler")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/5a8130462e4f0057ee1184509cd056eedd78742b.1621273353.git.thomas.lendacky@amd.com
To pick up the changes from:
70f094f4f0 ("KVM: nVMX: Properly pad 'struct kvm_vmx_nested_state_hdr'")
That don't entail changes in tooling.
This silences these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes segmentation fault when trying to obtain buildid list (e.g. via
perf-archive) from a zstd-compressed `perf.data` file:
```
$ perf record -z ls
...
[ perf record: Captured and wrote 0,010 MB perf.data, compressed (original 0,001 MB, ratio is 2,190) ]
$ memcheck perf buildid-list
...
==57268== Invalid read of size 4
==57268== at 0x5260D88: ZSTD_decompressStream (in /usr/lib/libzstd.so.1.4.9)
==57268== by 0x4BB51B: zstd_decompress_stream (zstd.c:100)
==57268== by 0x425C6C: perf_session__process_compressed_event (session.c:73)
==57268== by 0x427450: perf_session__process_user_event (session.c:1631)
==57268== by 0x42A609: reader__process_events (session.c:2207)
==57268== by 0x42A609: __perf_session__process_events (session.c:2264)
==57268== by 0x42A609: perf_session__process_events (session.c:2297)
==57268== by 0x343A62: perf_session__list_build_ids (builtin-buildid-list.c:88)
==57268== by 0x343A62: cmd_buildid_list (builtin-buildid-list.c:120)
==57268== by 0x3C7732: run_builtin (perf.c:313)
==57268== by 0x331157: handle_internal_command (perf.c:365)
==57268== by 0x331157: run_argv (perf.c:409)
==57268== by 0x331157: main (perf.c:539)
==57268== Address 0x7470 is not stack'd, malloc'd or (recently) free'd
```
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Link: http://lore.kernel.org/lkml/20210429185759.59870-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove leading spaces before tabs in Kconfig file(s) by running the
following command:
$ find drivers/net -name 'Kconfig*' | xargs sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
