forked from Minki/linux
7e6225a160
488508 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Jes Sorensen
|
7e6225a160 |
mac80211: avoid using uninitialized stack data
Avoid a case where we would access uninitialized stack data if the AP
advertises HT support without 40MHz channel support.
Cc: stable@vger.kernel.org
Fixes:
|
||
Chun-Hao Lin
|
5fbea33740 |
r8169:update rtl8168g pcie ephy parameter
Add ephy parameter to rtl8168g.
Also change the common function of rtl8168g from "rtl_hw_start_8168g_1" to
"rtl_hw_start_8168g". And function "rtl_hw_start_8168g_1" is used for
setting rtl8168g hardware parameters.
Following is the explanation of what hardware parameter change for.
rtl8168g may erroneous judge the PCIe signal quality and show the error bit
on PCI configuration space when in PCIe low power mode.
The following ephy parameters are for above issue.
{ 0x00, 0x0000, 0x0008 }
{ 0x0c, 0x37d0, 0x0820 }
{ 0x1e, 0x0000, 0x0001 }
rtl8168g may return to PCIe L0 from PCIe L0s low power mode too slow.
The following ephy parameter is for above issue.
{ 0x19, 0x8000, 0x0000 }
Signed-off-by: Chunhao Lin <hau@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
Florian Fainelli
|
7855f675e6 |
net: dsa: bcm_sf2: force link for all fixed PHY devices
For ports of the switch that we define as "fixed PHYs" such as MoCA, we
would have our Port 7 special handling that would allow us to assert the
link status indication.
For other ports, such as e.g: RGMII_1 connected to a cable modem, we
would rely on whatever the bootloader has left configured, which is a
bad assumption to make, we really need to force the link status
indication here.
Fixes:
|
||
David S. Miller
|
697766df6b |
Merge branch 'dma_mb'
Alexander Duyck says: ==================== arch: Add lightweight memory barriers for coherent memory access These patches introduce two new primitives for synchronizing cache coherent memory writes and reads. These two new primitives are: dma_rmb() dma_wmb() The first patch cleans up some unnecessary overhead related to the definition of read_barrier_depends, smp_read_barrier_depends, and comments related to the barrier. The second patch adds the primitives for the applicable architectures and asm-generic. The third patch adds the barriers to r8169 which turns out to be a good example of where the new barriers might be useful as they have full rmb()/wmb() barriers ordering accesses to the descriptors and the DescOwn bit. The fourth patch adds support for coherent_rmb() to the Intel fm10k, igb, and ixgbe drivers. Testing with the ixgbe driver has shown a processing time reduction of at least 7ns per 64B frame on a Core i7-4930K. This patch series is essentially the v7 for: v4-7: Add lightweight memory barriers for coherent memory access v3: Add lightweight memory barriers fast_rmb() and fast_wmb() v2: Introduce load_acquire() and store_release() v1: Introduce read_acquire() The key changes in this patch series versus the earlier patches are: v7 resubmit: - Added Acked-by: Ben Herrenschmidt from v5 to dma_rmb/wmb patch - No code changes from previous set, still applies cleanly and builds. v7: - Dropped test/debug patch that was accidentally slipped in v6: - Replaced "memory based device I/O" with "consistent memory" in docs - Added reference to DMA-API.txt to explain consistent memory v5: - Renamed barriers dma_rmb and dma_wmb - Undid smp_wmb changes in x86 and PowerPC - Defined smp_rmb as __lwsync for SMP case on PowerPC v4: - Renamed barriers coherent_rmb and coherent_wmb - Added smp_lwsync for use in smp_load_acquire/smp_store_release v3: - Moved away from acquire()/store() and instead focused on barriers - Added cleanup of read_barrier_depends - Added change in r8169 to fix cur_tx/DescOwn ordering - Simplified changes to just replacing/moving barriers in r8169 - Added update to documentation with code example v2: - Renamed read_acquire() to be consistent with smp_load_acquire() - Changed barrier used to be consistent with smp_load_acquire() - Updated PowerPC code to use __lwsync based on IBM article - Added store_release() as this is a viable use case for drivers - Added r8169 patch which is able to fully use primitives - Added fm10k/igb/ixgbe patch which is able to test performance ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Alexander Duyck
|
124b74c18e |
fm10k/igb/ixgbe: Use dma_rmb on Rx descriptor reads
This change makes it so that dma_rmb is used when reading the Rx descriptor. The advantage of dma_rmb is that it allows for a much lower cost barrier on x86, powerpc, arm, and arm64 architectures than a traditional memory barrier when dealing with reads that only have to synchronize to coherent memory. In addition I have updated the code so that it just checks to see if any bits have been set instead of just the DD bit since the DD bit will always be set as a part of a descriptor write-back so we just need to check for a non-zero value being present at that memory location rather than just checking for any specific bit. This allows the code itself to appear much cleaner and allows the compiler more room to optimize. Cc: Matthew Vick <matthew.vick@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Alexander Duyck
|
a075013870 |
r8169: Use dma_rmb() and dma_wmb() for DescOwn checks
The r8169 use a pair of wmb() calls when setting up the descriptor rings. The first is to synchronize the descriptor data with the descriptor status, and the second is to synchronize the descriptor status with the use of the MMIO doorbell to notify the device that descriptors are ready. This can come at a heavy price on some systems, and is not really necessary on systems such as x86 as a simple barrier() would suffice to order store/store accesses. As such we can replace the first memory barrier with dma_wmb() to reduce the cost for these accesses. In addition the r8169 uses a rmb() to prevent compiler optimization in the cleanup paths, however by moving the barrier down a few lines and replacing it with a dma_rmb() we should be able to use it to guarantee descriptor accesses do not occur until the device has updated the DescOwn bit from its end. One last change I made is to move the update of cur_tx in the xmit path to after the wmb. This way we can guarantee the device and all CPUs should see the DescOwn update before they see the cur_tx value update. Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Alexander Duyck
|
1077fa36f2 |
arch: Add lightweight memory barriers dma_rmb() and dma_wmb()
There are a number of situations where the mandatory barriers rmb() and wmb() are used to order memory/memory operations in the device drivers and those barriers are much heavier than they actually need to be. For example in the case of PowerPC wmb() calls the heavy-weight sync instruction when for coherent memory operations all that is really needed is an lsync or eieio instruction. This commit adds a coherent only version of the mandatory memory barriers rmb() and wmb(). In most cases this should result in the barrier being the same as the SMP barriers for the SMP case, however in some cases we use a barrier that is somewhere in between rmb() and smp_rmb(). For example on ARM the rmb barriers break down as follows: Barrier Call Explanation --------- -------- ---------------------------------- rmb() dsb() Data synchronization barrier - system dma_rmb() dmb(osh) data memory barrier - outer sharable smp_rmb() dmb(ish) data memory barrier - inner sharable These new barriers are not as safe as the standard rmb() and wmb(). Specifically they do not guarantee ordering between coherent and incoherent memories. The primary use case for these would be to enforce ordering of reads and writes when accessing coherent memory that is shared between the CPU and a device. It may also be noted that there is no dma_mb(). Most architectures don't provide a good mechanism for performing a coherent only full barrier without resorting to the same mechanism used in mb(). As such there isn't much to be gained in trying to define such a function. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Michael Neuling <mikey@neuling.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: David Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Alexander Duyck
|
8a44971841 |
arch: Cleanup read_barrier_depends() and comments
This patch is meant to cleanup the handling of read_barrier_depends and
smp_read_barrier_depends. In multiple spots in the kernel headers
read_barrier_depends is defined as "do {} while (0)", however we then go
into the SMP vs non-SMP sections and have the SMP version reference
read_barrier_depends, and the non-SMP define it as yet another empty
do/while.
With this commit I went through and cleaned out the duplicate definitions
and reduced the number of definitions down to 2 per header. In addition I
moved the 50 line comments for the macro from the x86 and mips headers that
defined it as an empty do/while to those that were actually defining the
macro, alpha and blackfin.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
David S. Miller
|
c11a9009ae |
Merge branch 'dsa'
Florian Fainelli says: ==================== net: dsa: two small bug fixes Here are two small fixes for the DSA slave interface creation code: - first patch fixes a null pointer de-reference with an invalid PHY device pointer while calling phy_connect_direct() - second path propagates the dsa_slave_phy_setup() error code down to its caller: dsa_slave_create ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Florian Fainelli
|
9697f1cde9 |
net: dsa: propagate error code from dsa_slave_phy_setup
In case we cannot attach to our slave netdevice PHY, error out and
propagate that error up to the caller: dsa_slave_create().
Fixes:
|
||
|
Florian Fainelli
|
53013c7743 |
net: dsa: handle non-existing PHYs on switch internal bus
In case there is no PHY at the designated address on the internal
switch, we would basically de-reference a null pointer here:
dsa_slave_phy_setup(...)
{
p->phy = ds->slave_mii_bus->phy_map[p->port];
phy_connect_direct(slave_dev, p->phy, dsa_slave_adjust_link,
^------
This can be triggered when the platform configuration (platform_data or
Device Tree) indicates there should be a PHY device at this address, but
the HW is non-responsive, such that we cannot attach a PHY device at
this specific location.
Fix this by checking the return value prior to calling
phy_connect_direct().
CC: Andrew Lunn <andrew@lunn.ch>
Fixes:
|
||
Linus Torvalds
|
70e71ca0af |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
1) New offloading infrastructure and example 'rocker' driver for
offloading of switching and routing to hardware.
This work was done by a large group of dedicated individuals, not
limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend,
Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu
2) Start making the networking operate on IOV iterators instead of
modifying iov objects in-situ during transfers. Thanks to Al Viro
and Herbert Xu.
3) A set of new netlink interfaces for the TIPC stack, from Richard
Alpe.
4) Remove unnecessary looping during ipv6 routing lookups, from Martin
KaFai Lau.
5) Add PAUSE frame generation support to gianfar driver, from Matei
Pavaluca.
6) Allow for larger reordering levels in TCP, which are easily
achievable in the real world right now, from Eric Dumazet.
7) Add a variable of napi_schedule that doesn't need to disable cpu
interrupts, from Eric Dumazet.
8) Use a doubly linked list to optimize neigh_parms_release(), from
Nicolas Dichtel.
9) Various enhancements to the kernel BPF verifier, and allow eBPF
programs to actually be attached to sockets. From Alexei
Starovoitov.
10) Support TSO/LSO in sunvnet driver, from David L Stevens.
11) Allow controlling ECN usage via routing metrics, from Florian
Westphal.
12) Remote checksum offload, from Tom Herbert.
13) Add split-header receive, BQL, and xmit_more support to amd-xgbe
driver, from Thomas Lendacky.
14) Add MPLS support to openvswitch, from Simon Horman.
15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen
Klassert.
16) Do gro flushes on a per-device basis using a timer, from Eric
Dumazet. This tries to resolve the conflicting goals between the
desired handling of bulk vs. RPC-like traffic.
17) Allow userspace to ask for the CPU upon what a packet was
received/steered, via SO_INCOMING_CPU. From Eric Dumazet.
18) Limit GSO packets to half the current congestion window, from Eric
Dumazet.
19) Add a generic helper so that all drivers set their RSS keys in a
consistent way, from Eric Dumazet.
20) Add xmit_more support to enic driver, from Govindarajulu
Varadarajan.
21) Add VLAN packet scheduler action, from Jiri Pirko.
22) Support configurable RSS hash functions via ethtool, from Eyal
Perry.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits)
Fix race condition between vxlan_sock_add and vxlan_sock_release
net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header
net/mlx4: Add support for A0 steering
net/mlx4: Refactor QUERY_PORT
net/mlx4_core: Add explicit error message when rule doesn't meet configuration
net/mlx4: Add A0 hybrid steering
net/mlx4: Add mlx4_bitmap zone allocator
net/mlx4: Add a check if there are too many reserved QPs
net/mlx4: Change QP allocation scheme
net/mlx4_core: Use tasklet for user-space CQ completion events
net/mlx4_core: Mask out host side virtualization features for guests
net/mlx4_en: Set csum level for encapsulated packets
be2net: Export tunnel offloads only when a VxLAN tunnel is created
gianfar: Fix dma check map error when DMA_API_DEBUG is enabled
cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call
net: fec: only enable mdio interrupt before phy device link up
net: fec: clear all interrupt events to support i.MX6SX
net: fec: reset fep link status in suspend function
net: sock: fix access via invalid file descriptor
net: introduce helper macro for_each_cmsghdr
...
|
||
|
Linus Torvalds
|
bae41e45b7 |
sound updates for 3.19-rc1
This became a fairly large pull request. In addition to the usual
driver updates / fixes, there have been a high amount of cleanups in
ASoC area, as well as control API helpers and kernel documentations
fixes touching through the whole tree.
In the driver side, the biggest changes are the support for new Intel
SoC found on new x86 machines, and the updates of FireWire dice and
oxfw drivers.
Some remarkable items are below:
* ALSA core
- PCM mmap code cleanup, removal of arch-dependent codes
- PCM xrun injection support
- PCM hwptr tracepoint support
- Refactoring of snd_pcm_action(), simplification of PCM locking
- Robustified sequecner auto-load functionality
- New control API helpers and lots of cleanups along with them
- Lots of kerneldoc fixes and cleanups
* USB-audio
- The mixer resume code was largely rewritten, and the devices with
quirks are resumed properly.
- New hardware support: Focusrite Scarlett, Digidesign Mbox1,
Denon/Marantz DACs, Zoom R16/24
* FireWire
- DICE driver updates with better duplex and sync support, including
MIDI support
- New OXFW driver for Oxford Semiconductor FW970/971 chipset,
including the previous LaCie Speakers device. Fullduplex and MIDI
support included as well as DICE driver.
* HD-audio
- Refactoring the driver-caps quirk handling in snd-hda-intel
- More consistent control names representing the topology better
- Fixups: HP mute LED with ALC268 codec, Ideapad S210 built-in mic
fix, ASUS Z99He laptop EAPD
* ASoC
- Conversion of AC'97 drivers to use regmap, bringing us closer to
the removal of the ASoC level I/O code
- Clean up a lot of old drivers that were open coding things that
have subsequently been implemented in the core
- Some DAPM performance improvements
- Removal of the now seldom used CODEC mutex
- Lots of updates for the newer Intel SoC support, including support
for the DSP and some Cherrytrail and Braswell machine drivers
- Support for Samsung boards using rt5631 as the CODEC
- Removal of the obsolete AFEB9260 machine driver
- Driver support for the TI TS3A227E headset driver used in some
Chrombeooks
* Others
- ASIHPI driver update and cleanups
- Lots of dev_*() printk conversions
- Lots of trivial cleanups for the codes spotted by Coccinelle
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=sB6v
-----END PGP SIGNATURE-----
Merge tag 'sound-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This became a fairly large pull request. In addition to the usual
driver updates / fixes, there have been a high amount of cleanups in
ASoC area, as well as control API helpers and kernel documentations
fixes touching through the whole tree.
In the driver side, the biggest changes are the support for new Intel
SoC found on new x86 machines, and the updates of FireWire dice and
oxfw drivers.
Some remarkable items are below:
ALSA core:
- PCM mmap code cleanup, removal of arch-dependent codes
- PCM xrun injection support
- PCM hwptr tracepoint support
- Refactoring of snd_pcm_action(), simplification of PCM locking
- Robustified sequecner auto-load functionality
- New control API helpers and lots of cleanups along with them
- Lots of kerneldoc fixes and cleanups
USB-audio:
- The mixer resume code was largely rewritten, and the devices with
quirks are resumed properly.
- New hardware support: Focusrite Scarlett, Digidesign Mbox1,
Denon/Marantz DACs, Zoom R16/24
FireWire:
- DICE driver updates with better duplex and sync support, including
MIDI support
- New OXFW driver for Oxford Semiconductor FW970/971 chipset,
including the previous LaCie Speakers device. Fullduplex and MIDI
support included as well as DICE driver.
HD-audio:
- Refactoring the driver-caps quirk handling in snd-hda-intel
- More consistent control names representing the topology better
- Fixups: HP mute LED with ALC268 codec, Ideapad S210 built-in mic
fix, ASUS Z99He laptop EAPD
ASoC:
- Conversion of AC'97 drivers to use regmap, bringing us closer to
the removal of the ASoC level I/O code
- Clean up a lot of old drivers that were open coding things that
have subsequently been implemented in the core
- Some DAPM performance improvements
- Removal of the now seldom used CODEC mutex
- Lots of updates for the newer Intel SoC support, including support
for the DSP and some Cherrytrail and Braswell machine drivers
- Support for Samsung boards using rt5631 as the CODEC
- Removal of the obsolete AFEB9260 machine driver
- Driver support for the TI TS3A227E headset driver used in some
Chrombeooks
Others:
- ASIHPI driver update and cleanups
- Lots of dev_*() printk conversions
- Lots of trivial cleanups for the codes spotted by Coccinelle"
* tag 'sound-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (594 commits)
ALSA: pcxhr: NULL dereference on probe failure
ALSA: lola: NULL dereference on probe failure
ALSA: hda - Add "eapd" model string for AD1986A codec
ALSA: hda - Add EAPD fixup for ASUS Z99He laptop
ALSA: oxfw: Add hwdep interface
ALSA: oxfw: Add support for capture/playback MIDI messages
ALSA: oxfw: add support for capturing PCM samples
ALSA: oxfw: Add support AMDTP in-stream
ALSA: oxfw: Add support for Behringer/Mackie devices
ALSA: oxfw: Change the way to start stream
ALSA: oxfw: Add proc interface for debugging purpose
ALSA: oxfw: Change the way to make PCM rules/constraints
ALSA: oxfw: Add support for AV/C stream format command to get/set supported stream formation
ALSA: oxfw: Change the way to name card
ALSA: dice: Add support for MIDI capture/playback
ALSA: dice: Add support for capturing PCM samples
ALSA: dice: Support for non SYT-Match sampling clock source mode
ALSA: dice: Add support for duplex streams with synchronization
ALSA: dice: Change the way to start stream
ALSA: jack: Add dummy snd_jack_set_key() definition
...
|
||
|
Linus Torvalds
|
7ef58b32f5 |
Devicetree changes for v3.19
Lots of activity in the devicetree code for v3.18. Most of it is related
to getting all of the overlay support code in place, but there are other
important things in there.
There are a few trivial merge conflicts. They shouldn't give you any
trouble.
Highlights:
- OF_RECONFIG notifiers for SPI, I2C and Platform devices. Those
subsystems can now respond to live changes to the device tree.
- CONFIG_OF_OVERLAY method for applying live changes to the device tree
- Removal of the of_allnodes list. This used to be used to iterate over
all the nodes in the device tree, but it is unnecessary because the
same thing can be done by iterating over the list of child pointers.
Getting rid of of_allnodes saves some memory and avoids the
possibility of of_allnodes being sorted differently from the child
lists.
- Support for retrieving original DTB blob via sysfs. Needed by kexec.
- More unittests
- Documentation and minor bug fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ak0A
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux
Pull devicetree changes from Grant Likely:
"Lots of activity in the devicetree code for v3.18. Most of it is
related to getting all of the overlay support code in place, but there
are other important things in there.
Highlights:
- OF_RECONFIG notifiers for SPI, I2C and Platform devices. Those
subsystems can now respond to live changes to the device tree.
- CONFIG_OF_OVERLAY method for applying live changes to the device
tree
- Removal of the of_allnodes list. This used to be used to iterate
over all the nodes in the device tree, but it is unnecessary
because the same thing can be done by iterating over the list of
child pointers. Getting rid of of_allnodes saves some memory and
avoids the possibility of of_allnodes being sorted differently from
the child lists.
- Support for retrieving original DTB blob via sysfs. Needed by
kexec.
- More unittests
- Documentation and minor bug fixes"
* tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: (42 commits)
of: Delete unnecessary check before calling "of_node_put()"
of: Drop ->next pointer from struct device_node
spi: Check for spi_of_notifier when CONFIG_OF_DYNAMIC=y
of: support passing console options with stdout-path
of: add optional options parameter to of_find_node_by_path()
of: Add bindings for chosen node, stdout-path
of: Remove unneeded and incorrect MODULE_DEVICE_TABLE
ARM: dt: fix up PL011 device tree bindings
of: base, fix of_property_read_string_helper kernel-doc
of: remove select of non-existant OF_DEVICE config symbol
spi/of: Add OF notifier handler
spi/of: Create new device registration method and accessors
i2c/of: Add OF_RECONFIG notifier handler
i2c/of: Factor out Devicetree registration code
of/overlay: Add overlay unittests
of/overlay: Introduce DT overlay support
of/reconfig: Add OF_DYNAMIC notifier for platform_bus_type
of/reconfig: Always use the same structure for notifiers
of/reconfig: Add debug output for OF_RECONFIG notifiers
of/reconfig: Add empty stubs for the of_reconfig methods
...
|
||
|
Linus Torvalds
|
413fd0e3fb |
fbdev changes for 3.19
* support for mx6sl and mx6sx * OMAP HDMI audio rewrite to make it finally work * OMAP video PLL work to prepare for new DRA7xx SoCs * simplefb DT related improvements -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUiZ3aAAoJEPo9qoy8lh71I4gP/0P0H7DtqwSRGWVDenVYC4o1 IoRJgRBSu16gg9h1yEbluGIB0S/F+0vvgJLv83fXPIFYCApjeIyola60wzTxsCQO 5+DY8IbioAiYCAC4brPbE17PQZhkqomVZy7Eo/WW8Bp7NRwhIVGgstjfKIKarRmR l7Zu7ciRt7A1677P8Te09w3hzWfvRNOCYi/lbSbHHeItpAfOqBQLI6WYh0WYFgbW oOqplfJKQDW67mj+DmnR8ep+CwN6/+AvmialkwiPKKBjE578zmTJuRXr/ZZMgqmY WiqC3O3yoTaDn9ReUw1CBmeYbWfhjdDotydTc0eUD+Z3cGIKlBh3coprpOEILuuU FCsbBWQGP2FtYPfvl0R80+VHLRhDxFXV0hcxocyvNzK78AfKrTKBMYTdPh/i+0M/ +pA70thjlKpqZgBK6ukyMnB6KxiB9tOFdFx7PRXby4VgRGHqeYNRlvYPcYOPsgb2 xRMIxCWhJHqZzNlv+bC6R4T8UTOIT4HoWthF0yN7SYrVujX0+1ky8Zz37jcTFnnS aNQ8MQL+6Uy1pa0v2c4oGH0qNVCWpsAXMtFBB1VkNzQg1vyuJHd3lgWYND33+3Uo C08lqzC3FZeA70g5iOhoP5IaW1JdQOe4EfDPU+ZjBQFB0Mgy025Z9dsAUcb08/2C s/ZXcRvzXMzpBSflsUzf =VAZB -----END PGP SIGNATURE----- Merge tag 'fbdev-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: - support for mx6sl and mx6sx - OMAP HDMI audio rewrite to make it finally work - OMAP video PLL work to prepare for new DRA7xx SoCs - simplefb DT related improvements * tag 'fbdev-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (81 commits) video: uvesafb: Deletion of an unnecessary check before the function call "platform_device_put" video: fbdev-VIA: Deletion of an unnecessary check before the function call "framebuffer_release" video: fbdev-MMP: Deletion of an unnecessary check before the function call "mmp_unregister_path" video: mx3fb: Deletion of an unnecessary check before the function call "backlight_device_unregister" video: fbdev-OMAP2: Deletion of unnecessary checks before the function call "i2c_put_adapter" video: fbdev-SIS: Deletion of unnecessary checks before the function call "pci_dev_put" video: smscufx: Deletion of unnecessary checks before the function call "vfree" video: udlfb: Deletion of unnecessary checks before the function call "vfree" video: uvesafb: Deletion of an unnecessary check before the function call "uvesafb_free" video: fbdev-LCDC: Deletion of an unnecessary check before the function call "vfree" video: fbdev: arkfb: suppress build warning video: fbdev: s3fb: suppress build warning video: fbdev: vt8623fb: suppress build warning OMAPDSS: hdmi5: Fix bit field for IEC958_AES2_CON_SOURCE OMAPDSS: hdmi: Remove __exit qualifier from hdmi_uninit_output() OMAPDSS: hdmi5: Change hdmi_wp idlemode to to no_idle for audio playback OMAPDSS: Remove all references to obsolete HDMI audio callbacks ASoC: omap: Remove obsolete HDMI audio code and Kconfig options OMAPDSS: hdmi5: Register ASoC platform device for omap hdmi audio OMAPDSS: hdmi5: Remove callbacks for the old ASoC DAI driver ... |
||
|
Linus Torvalds
|
6b9e2cea42 |
virtio: virtio 1.0 support, misc patches
This adds a lot of infrastructure for virtio 1.0 support. Notable missing pieces: virtio pci, virtio balloon (needs spec extension), vhost scsi. Plus, there are some minor fixes in a couple of places. Cc: David Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJUh1CVAAoJECgfDbjSjVRpWZcH/2+EGPyng7Lca820UHA0cU1U u4D8CAAwOGaVdnUUo8ox1eon3LNB2UgRtgsl3rBDR3YTgFfNPrfuYdnHO0dYIDc1 lS26NuPrVrTX0lA+OBPe2nlKrsrOkn8aw1kxG9Y0gKtNg/+HAGNW5e2eE7R/LrA5 94XbWZ8g9Yf4GPG1iFmih9vQvvN0E68zcUlojfCnllySgaIEYr8nTiGQBWpRgJat fCqFAp1HMDZzGJQO+m1/Vw0OftTRVybyfai59e6uUTa8x1djvzPb/1MvREqQjegM ylSuofIVyj7JPu++FbAjd9mikkb53GSc8ql3YmWNZLdr69rnkzP0GdzQvrdheAo= =RtrR -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: "virtio: virtio 1.0 support, misc patches This adds a lot of infrastructure for virtio 1.0 support. Notable missing pieces: virtio pci, virtio balloon (needs spec extension), vhost scsi. Plus, there are some minor fixes in a couple of places. Note: some net drivers are affected by these patches. David said he's fine with merging these patches through my tree. Rusty's on vacation, he acked using my tree for these, too" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (70 commits) virtio_ccw: finalize_features error handling virtio_ccw: future-proof finalize_features virtio_pci: rename virtio_pci -> virtio_pci_common virtio_pci: update file descriptions and copyright virtio_pci: split out legacy device support virtio_pci: setup config vector indirectly virtio_pci: setup vqs indirectly virtio_pci: delete vqs indirectly virtio_pci: use priv for vq notification virtio_pci: free up vq->priv virtio_pci: fix coding style for structs virtio_pci: add isr field virtio: drop legacy_only driver flag virtio_balloon: drop legacy_only driver flag virtio_ccw: rev 1 devices set VIRTIO_F_VERSION_1 virtio: allow finalize_features to fail virtio_ccw: legacy: don't negotiate rev 1/features virtio: add API to detect legacy devices virtio_console: fix sparse warnings vhost: remove unnecessary forward declarations in vhost.h ... |
||
|
Linus Torvalds
|
14ba9a2e4b |
Merge branch 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox framework updates from Jassi Brar. * 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration: Mailbox: Add support for Platform Communication Channel mailbox/omap: adapt to the new mailbox framework mailbox: add tx_prepare client callback mailbox: Don't unnecessarily re-arm the polling timer |
||
|
Linus Torvalds
|
b859e7d13b |
spi: Updates for v3.19
Not a huge amount going on this release, mainly new drivers (there's a
couple more waiting that didn't quite make the cut for this release
too):
- An interface for querying if the current transfer is the last in a
message, allowing controllers that need special handling for the
final transfer to use the core message parsing.
- Support for Amlogic Meson SPIFC, Imagination Technologies SFPI, Intel
Quark X1000 and Samsung Exynos 7 controllers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUh0aVAAoJECTWi3JdVIfQ/eMH/06iz3nPi0/bkv/1bW72QbUf
glk/dT/AAPzoXPdwtxqbiHGdvt0QrarXs0nsQgqmvIA0SQRuTNvncon8UmJ9+N2B
OaCfUByC9C8hYpyc4KB4HxzN/sFx9W+F81JRLCk5+zAmn43Gofas9v2AfAy4iksD
BdIpGbcfn/0gmXqObjqfiWh2W8Sqv13goI4bHCAg5v6m58Zht9IV9vn4TSWAWB34
lq4Htn0QxMBRmzj/9iWqAzdfhZGMP1bABqpJrrGzJAws+TzFqytVXPC4iYID6RVW
u4TvOSKq9fkHkbmgapuhR2E7H4P/kYcwtEIJdT/fcUxeDF4w4s0lYNweh6tdk3I=
=wBDI
-----END PGP SIGNATURE-----
Merge tag 'spi-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"Not a huge amount going on this release, mainly new drivers (there's a
couple more waiting that didn't quite make the cut for this release
too):
- An interface for querying if the current transfer is the last in a
message, allowing controllers that need special handling for the
final transfer to use the core message parsing.
- Support for Amlogic Meson SPIFC, Imagination Technologies SFPI,
Intel Quark X1000 and Samsung Exynos 7 controllers"
* tag 'spi-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (38 commits)
spi/s3c64xx: Remove redundant runtime PM management
spi: fsl-spi: remove unused variable assignment
spi: spi-fsl-spi: Return an error code in fsl_spi_do_one_msg()
spi: core: Do not mangle error code from kthread_run()
spi: fsl-espi: add (un)prepare_transfer_hardware calls to save power if SPI is not in use
spi: fsl-(e)spi: migrate to generic master queueing
spi/txx9: Deletion of an unnecessary check before the function call "clk_disable"
spi: cadence: Fix 3-to-8 mux mode
spi: cadence: Init HW after reading devicetree attributes
spi: meson: Select REGMAP_MMIO
spi: s3c64xx: add support for exynos7 SPI controller
spi: spi-pxa2xx: SPI support for Intel Quark X1000
spi: meson: meson_spifc_setup_speed() can be static
spi: spi-pxa2xx: Add helpers for regiseters' accessing
spi: spi-mxs: Fix mapping from vmalloc-ed buffer to scatter list
spi: atmel: introduce probe deferring
spi: atmel: remove compat for non DT board when requesting dma chan
spi: meson: Add support for Amlogic Meson SPIFC
spi: meson: Add device tree bindings documentation for SPIFC
spi: core: Add spi_transfer_is_last() helper
...
|
||
|
Linus Torvalds
|
709d9f09b6 |
edac updates for v3.19-rc1
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUhyDVAAoJEAhfPr2O5OEVsdMP/it7jKAKu1uHvVoWfwPcB0nG QZ7Dt3Hu9aZtaZJs9OFOl2RrGyp4tXOK1SM2QInRGRjjquEP83AASk7XJRkXHr61 DTiMxHnKXvGfky4ONS76ZP3JWwfBffT5Y8oXIGiarAyUgcK66mnelrlju0r1XM11 uoUZqOzE5ySfARFcYm9VG53qLG4RxOERqP+EKSyctRE5gCsuymPaSKIwqj7rcg4R QikDJQv2H8y2Ui0T9Dk6urdOjlUpBczGRVaXdY+2FyDfs0KPLEWUQVl8q2Lj/bur 1A10H+p9HdIA9emV2WEetQmJzz7POgn/j+BLkRKImPS5NgKv2Gu5BWiVUKQg4oRt shvcpp38PYSmeDIy16v+3RDf0THSSYxhq7ExlGacIzaRk7G2asgRAWixiVS45NzI yMb17ZJlHhzVMEyoSlTJH90o4y6UT9njZ7TcK3+9wmhbFyIlGWrrD1Mp56PDCYes KO5VRYkwnw8GAd7gH0xwtHRREQYt4VneVyb7Ccw2VxrdIffVp1fDhpxnS+tw+Qri 294+RoJlnrp4JIpXerAJgQIIiMsRhg64EQ3rsT4Skj6Hfq4KExkmdrHE38p+FZLO xHURKAt2jDSuu/DqaWpBclJXE4Q+MhS303pn80x0MHbFmRAYxwmWFjgPwQKrzNU9 x47JgdYNpBoF2+WK6ZGo =CeIU -----END PGP SIGNATURE----- Merge tag 'edac/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac Pull edac updates from Mauro Carvalho Chehab: - Broadwell-DE support on sb-edac driver - Some fixes at sb-edac driver * tag 'edac/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: sb_edac: Fix typo computing number of banks sb_edac: Add support for Broadwell-DE processor sb_edac: Fix discovery of top-of-low-memory for Haswell sb_edac: Fix erroneous bytes->gigabytes conversion sb_edac: Fix off-by-one error in number of channels |
||
Marcelo Leitner
|
00c83b01d5 |
Fix race condition between vxlan_sock_add and vxlan_sock_release
Currently, when trying to reuse a socket, vxlan_sock_add will grab
vn->sock_lock, locate a reusable socket, inc refcount and release
vn->sock_lock.
But vxlan_sock_release() will first decrement refcount, and then grab
that lock. refcnt operations are atomic but as currently we have
deferred works which hold vs->refcnt each, this might happen, leading to
a use after free (specially after vxlan_igmp_leave):
CPU 1 CPU 2
deferred work vxlan_sock_add
... ...
spin_lock(&vn->sock_lock)
vs = vxlan_find_sock();
vxlan_sock_release
dec vs->refcnt, reaches 0
spin_lock(&vn->sock_lock)
vxlan_sock_hold(vs), refcnt=1
spin_unlock(&vn->sock_lock)
hlist_del_rcu(&vs->hlist);
vxlan_notify_del_rx_port(vs)
spin_unlock(&vn->sock_lock)
So when we look for a reusable socket, we check if it wasn't freed
already before reusing it.
Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Fixes:
|
||
Cyrille Pitchen
|
51f8301485 |
net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
2183a58803 |
media updates for v3.19-rc1
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUhxhbAAoJEAhfPr2O5OEV4JwP/2I7D2KGz5tdNGDAh1H8+swR hoj3tX7HLhwBmF6XIUlMYbk5L/ClDace6kcjT6OjwJ9SktrrKks6ZSsYsBjCIyOC yS7xNQArUKzWk4vV+uJVAvtF8V57LLFul8dhHk0JJwAxrkWnPvDdfJNs4PhUAkgn 1i0PPshNo5Ow/+4YMiOjEDR+q9TMSUUzaq5zkPF7AFCnykuJ1wUJwUE0qjTfGi+4 gl1yMye0TEawTYSM8h/+Lh7wosNFZYcXg85r04A6a8h6GLgg0h6KSOJjyPITmQ+j hLdtyiYs8a6XT+Y8o416zxpbSozo7KXCUTtet/N5g+lgQMqZqSd9WxE52SOY+kfd UVeob0VfWR0xdDzaJp5rLQ/MQ16RTHaHppgUidFxxGe9D5f9JM/88I0OfwNzl4uO cv2cyeNktHH6bcjfOGqxSVmZWgAm6q6qU7MN07PoN+5TcUlYTAOi1WLE5K+7HGgw CxzOZ61oxi/OO1FapaVoipq6ycjltTql2kbcARvmrRrbge0ocAqHxHqFyUbDDhNw Wn/O6VzLfpW0vGTacC6+xcUSpIhwajJ80UJAOqJP8sw0Xtmian5Lcs6gVzxwkOdU 36Po4RRGFqsG6Sq3HR+toNwKt/nHNEFkJwYcNFHdvBiXTEYYkMe6MccUxxb3i/iI KxB1s51zVy9t3PqjP+3J =i7gx -----END PGP SIGNATURE----- Merge tag 'media/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Two new dvb frontend drivers: mn88472 and mn88473 - A new driver for some PCIe DVBSky cards - A new remote controller driver: meson-ir - One LIRC staging driver got rewritten and promoted to mainstream: igorplugusb - A new tuner driver (m88rs6000t) - The old omap2 media driver got removed from staging. This driver uses an old DMA API and it is likely broken on recent kernels. Nobody cared enough to fix it - Media bus format moved to a separate header, as DRM will also use the definitions there - mem2mem_testdev were renamed to vim2m, in order to use the same naming convention taken by the other virtual test driver (vivid) - Added a new driver for coda SoC (coda-jpeg) - The cx88 driver got converted to use videobuf2 core - Make DMABUF export buffer to work with DMA Scatter/Gather and Vmalloc cores - Lots of other fixes, improvements and cleanups on the drivers. * tag 'media/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (384 commits) [media] mn88473: One function call less in mn88473_init() after error [media] mn88473: Remove uneeded check before release_firmware() [media] lirc_zilog: Deletion of unnecessary checks before vfree() [media] MAINTAINERS: Add myself as img-ir maintainer [media] img-ir: Don't set driver's module owner [media] img-ir: Depend on METAG or MIPS or COMPILE_TEST [media] img-ir/hw: Drop [un]register_decoder declarations [media] img-ir/hw: Fix potential deadlock stopping timer [media] img-ir/hw: Always read data to clear buffer [media] redrat3: ensure dma is setup properly [media] ddbridge: remove unneeded check before dvb_unregister_device() [media] si2157: One function call less in si2157_init() after error [media] tuners: remove uneeded checks before release_firmware() [media] arm: omap2: rx51-peripherals: fix build warning [media] stv090x: add an extra protetion against buffer overflow [media] stv090x: Remove an unreachable code [media] stv090x: Some whitespace cleanups [media] em28xx: checkpatch cleanup: whitespaces/new lines cleanups [media] si2168: add support for firmware files in new format [media] si2168: debug printout for firmware version ... |
||
|
David S. Miller
|
efef793926 |
Merge branch 'mlx4-next'
Or Gerlitz says: ==================== mlx4 driver update This series from Matan, Jenny, Dotan and myself is mostly about adding support to a new performance optimized flow steering mode (patches 4-10). The 1st two patches are small fixes (one for VXLAN and one for SRIOV), and the third patch is a fix to avoid hard-lockup situation when many (hunderds) processes holding user-space QPs/CQs get events. Matan and Or. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Matan Barak
|
7d077cd34e |
net/mlx4: Add support for A0 steering
Add the required firmware commands for A0 steering and a way to enable that. The firmware support focuses on INIT_HCA, QUERY_HCA, QUERY_PORT, QUERY_DEV_CAP and QUERY_FUNC_CAP commands. Those commands are used to configure and query the device. The different A0 DMFS (steering) modes are: Static - optimized performance, but flow steering rules are limited. This mode should be choosed explicitly by the user in order to be used. Dynamic - this mode should be explicitly choosed by the user. In this mode, the FW works in optimized steering mode as long as it can and afterwards automatically drops to classic (full) DMFS. Disable - this mode should be explicitly choosed by the user. The user instructs the system not to use optimized steering, even if the FW supports Dynamic A0 DMFS (and thus will be able to use optimized steering in Default A0 DMFS mode). Default - this mode is implicitly choosed. In this mode, if the FW supports Dynamic A0 DMFS, it'll work in this mode. Otherwise, it'll work at Disable A0 DMFS mode. Under SRIOV configuration, when the A0 steering mode is enabled, older guest VF drivers who aren't using the RX QP allocation flag (MLX4_RESERVE_A0_QP) will get a QP from the general range and fail when attempting to register a steering rule. To avoid that, the PF context behaviour is changed once on A0 static mode, to require support for the allocation flag in VF drivers too. In order to enable A0 steering, we use log_num_mgm_entry_size param. If the value of the parameter is not positive, we treat the absolute value of log_num_mgm_entry_size as a bit field. Setting bit 2 of this bit field enables static A0 steering. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Matan Barak
|
431df8c7e9 |
net/mlx4: Refactor QUERY_PORT
Currently QUERY_PORT is done as a part of QUERY_DEV_CAP firmware command. Since we would like to use it without querying all device capabilities, extract this part to be a function of its own. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Matan Barak
|
579d059bd2 |
net/mlx4_core: Add explicit error message when rule doesn't meet configuration
When a given flow steering rule is invalid in respect to the current steering configuration, print the correct error message to the system log. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Matan Barak
|
d57febe1a4 |
net/mlx4: Add A0 hybrid steering
A0 hybrid steering is a form of high performance flow steering. By using this mode, mlx4 cards use a fast limited table based steering, in order to enable fast steering of unicast packets to a QP. In order to implement A0 hybrid steering we allocate resources from different zones: (1) General range (2) Special MAC-assigned QPs [RSS, Raw-Ethernet] each has its own region. When we create a rss QP or a raw ethernet (A0 steerable and BF ready) QP, we try hard to allocate the QP from range (2). Otherwise, we try hard not to allocate from this range. However, when the system is pushed to its limits and one needs every resource, the allocator uses every region it can. Meaning, when we run out of raw-eth qps, the allocator allocates from the general range (and the special-A0 area is no longer active). If we run out of RSS qps, the mechanism tries to allocate from the raw-eth QP zone. If that is also exhausted, the allocator will allocate from the general range (and the A0 region is no longer active). Note that if a raw-eth qp is allocated from the general range, it attempts to allocate the range such that bits 6 and 7 (blueflame bits) in the QP number are not set. When the feature is used in SRIOV, the VF has to notify the PF what kind of QP attributes it needs. In order to do that, along with the "Eth QP blueflame" bit, we reserve a new "A0 steerable QP". According to the combination of these bits, the PF tries to allocate a suitable QP. In order to maintain backward compatibility (with older PFs), the PF notifies which QP attributes it supports via QUERY_FUNC_CAP command. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Matan Barak
|
7a89399ffa |
net/mlx4: Add mlx4_bitmap zone allocator
The zone allocator is a mechanism which manages a few mlx4_bitmaps. When allocating a resource, the user indicates the desired zone of which this resource will be allocated from. If possible, the resource will be allocated from this zone. Otherwise, the resource will be allocated from a less-than, equal-to, higher-than priority zone, according to the desired zone's properties with that respective allocation order. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Dotan Barak
|
ab256e5ad0 |
net/mlx4: Add a check if there are too many reserved QPs
The number of reserved QPs is affected both from the firmware and from the driver's requirements. This patch adds a check that validates that this number is indeed feasable. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Eugenia Emantayev
|
ddae0349fd |
net/mlx4: Change QP allocation scheme
When using BF (Blue-Flame), the QPN overrides the VLAN, CV, and SV fields in the WQE. Thus, BF may only be used for QPNs with bits 6,7 unset. The current Ethernet driver code reserves a Tx QP range with 256b alignment. This is wrong because if there are more than 64 Tx QPs in use, QPNs >= base + 65 will have bits 6/7 set. This problem is not specific for the Ethernet driver, any entity that tries to reserve more than 64 BF-enabled QPs should fail. Also, using ranges is not necessary here and is wasteful. The new mechanism introduced here will support reservation for "Eth QPs eligible for BF" for all drivers: bare-metal, multi-PF, and VFs (when hypervisors support WC in VMs). The flow we use is: 1. In mlx4_en, allocate Tx QPs one by one instead of a range allocation, and request "BF enabled QPs" if BF is supported for the function 2. In the ALLOC_RES FW command, change param1 to: a. param1[23:0] - number of QPs b. param1[31-24] - flags controlling QPs reservation Bit 31 refers to Eth blueflame supported QPs. Those QPs must have bits 6 and 7 unset in order to be used in Ethernet. Bits 24-30 of the flags are currently reserved. When a function tries to allocate a QP, it states the required attributes for this QP. Those attributes are considered "best-effort". If an attribute, such as Ethernet BF enabled QP, is a must-have attribute, the function has to check that attribute is supported before trying to do the allocation. In a lower layer of the code, mlx4_qp_reserve_range masks out the bits which are unsupported. If SRIOV is used, the PF validates those attributes and masks out unsupported attributes as well. In order to notify VFs which attributes are supported, the VF uses QUERY_FUNC_CAP command. This command's mailbox is filled by the PF, which notifies which QP allocation attributes it supports. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Matan Barak
|
3dca0f42c7 |
net/mlx4_core: Use tasklet for user-space CQ completion events
Previously, we've fired all our completion callbacks straight from our ISR. Some of those callbacks were lightweight (for example, mlx4_en's and IPoIB napi callbacks), but some of them did more work (for example, the user-space RDMA stack uverbs' completion handler). Besides that, doing more than the minimal work in ISR is generally considered wrong, it could even lead to a hard lockup of the system. Since when a lot of completion events are generated by the hardware, the loop over those events could be so long, that we'll get into a hard lockup by the system watchdog. In order to avoid that, add a new way of invoking completion events callbacks. In the interrupt itself, we add the CQs which receive completion event to a per-EQ list and schedule a tasklet. In the tasklet context we loop over all the CQs in the list and invoke the user callback. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Or Gerlitz
|
383677da43 |
net/mlx4_core: Mask out host side virtualization features for guests
When VFs (guests in this context) issue the QUERY_DEV_CAP command, they need not be told that host side virtualization features such as VST, FSM (MAC anti-spoofing) and running > 80 VFs are supported by the device. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Or Gerlitz
|
c58942f252 |
net/mlx4_en: Set csum level for encapsulated packets
This was dropped by mistake for the napi_gro_frags flow, fix that.
Fixes:
|
||
|
Linus Torvalds
|
e28870f9b3 |
- Clean-up leaky resources; pwm_bl
- Simplify Device Tree initialisation; lp855x_bl - Add Regulator support; lp855x - Remove Bryan from the Maintainer list -- new baby, no time :) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUhsq0AAoJEFGvii+H/Hdh8HgQAKcv+1jK3Eouh7YJPBLOQu73 qNBD6nwcCRjcf2gjW9DkoGxTyZVs2+ndXxG85z3CBOdhr84YeyF1ity76wLs7Dd+ dQaR1zP+0H0sh0jMS+SGdEBnF5eSV/iBVvR2u8q0Wl8/m7zOJE1PIVEv6P7/+wNJ jv/MdzLvp8LEwANwaaknvePCGPnnbLcBcEonivx4u2lePF1Y1Vtk6tHWW8zm/GEG p7DrOwWGkCWJwFeROnbzy+oaR88oA5Ezrt5b56u+AMvcnRoSZqPF+cAV7U72AsnH wXiKtAE/oBsgMKQcXyeGiGD8/3uwNZPxO3h2kLme7Cw/oL25Z7D/ru0308/82ozo gK/9nYiXC8NhEWEhed9+3+Rp7mLGy6BaqZ8GX7uK2jeLhDqNSKDXCOpi7QTEl1mn z4mbXi5phTvbcSwcLyytzVIuFfOPAA7WzBVK6U+n0BkGMHrECCRyAEroO5wy/HST 3B3Q49NNclrqg60/IMFxfaqDLnAw0DWUEshRJP5ggCfyWE9iK/NUSpKtzp3nzWKf 7WcpiOwjC17emjH8nIDOu5xrbakGbNWLP3Z/keyzhtIP8bDqEvHrL7kFZhirFWOm g8z/9he6m93T15B7BwRi+O/gtsdsBp/mTxPNz35elQEvi4pKp0jmUp6F+GIQL3Vh xecI7iLhjiiLLB+wJDTU =0PNI -----END PGP SIGNATURE----- Merge tag 'backlight-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: - Clean-up leaky resources; pwm_bl - Simplify Device Tree initialisation; lp855x_bl - Add Regulator support; lp855x - Remove Bryan from the Maintainer list -- new baby, no time :) * tag 'backlight-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: MAINTAINERS: Remove my name from Backlight subsystem backlight: lp855x: Add supply regulator to lp855x backlight: lp855x: Refactor DT parsing code backlight: pwm: Clean-up pwm requested using legacy API |
||
Sriharsha Basavapatna
|
630f4b7056 |
be2net: Export tunnel offloads only when a VxLAN tunnel is created
The encapsulated offload flags shouldn't be unconditionally exported to the stack. The stack expects offloading to work across all tunnel types when those flags are set. This would break other tunnels (like GRE) since be2net currently supports tunnel offload for VxLAN only. Also, with VxLANs Skyhawk-R can offload only 1 UDP dport. If more than 1 UDP port is added, we should disable offloads in that case too. Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Kevin Hao
|
0a4b5a2488 |
gianfar: Fix dma check map error when DMA_API_DEBUG is enabled
We need to use dma_mapping_error() to check the dma address returned by dma_map_single/page(). Otherwise we would get warning like this: WARNING: at lib/dma-debug.c:1140 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0-rc2-next-20141029 #196 task: c0834300 ti: effe6000 task.ti: c0874000 NIP: c02b2c98 LR: c02b2c98 CTR: c030abc4 REGS: effe7d70 TRAP: 0700 Not tainted (3.18.0-rc2-next-20141029) MSR: 00021000 <CE,ME> CR: 22044022 XER: 20000000 GPR00: c02b2c98 effe7e20 c0834300 00000098 00021000 00000000 c030b898 00000003 GPR08: 00000001 00000000 00000001 749eec9d 22044022 1001abe0 00000020 ef278678 GPR16: ef278670 ef278668 ef278660 070a8040 c087f99c c08cdc60 00029000 c0840d44 GPR24: c08be6e8 c0840000 effe7e78 ef041340 00000600 ef114e10 00000000 c08be6e0 NIP [c02b2c98] check_unmap+0x51c/0x9e4 LR [c02b2c98] check_unmap+0x51c/0x9e4 Call Trace: [effe7e20] [c02b2c98] check_unmap+0x51c/0x9e4 (unreliable) [effe7e70] [c02b31d8] debug_dma_unmap_page+0x78/0x8c [effe7ed0] [c03d1640] gfar_clean_rx_ring+0x208/0x488 [effe7f40] [c03d1a9c] gfar_poll_rx_sq+0x3c/0xa8 [effe7f60] [c04f8714] net_rx_action+0xc0/0x178 [effe7f90] [c00435a0] __do_softirq+0x100/0x1fc [effe7fe0] [c0043958] irq_exit+0xa4/0xc8 [effe7ff0] [c000d14c] call_do_irq+0x24/0x3c [c0875e90] [c00048a0] do_IRQ+0x8c/0xf8 [c0875eb0] [c000ed10] ret_from_except+0x0/0x18 For TX, we need to unmap the pages which has already been mapped and free the skb before return. For RX, move the dma mapping and error check to gfar_new_skb(). We would reuse the original skb in the rx ring when either allocating skb failure or dma mapping error. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Hariprasad Shenai
|
666224d4d5 |
cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call
Remove use of calls into t4_fw_hello() with MASTER_MUST, which results in FW_HELLO_CMD_MASTERFORCE being set. The firmware doesn't support this and of course any existing PF Drivers will totally go for a toss. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
c1b30e4d94 |
Pin control changes for the v3.19 series:
- Force conversion of the ux500 pin control device trees
and parsers to use the generic pin control bindings.
- New driver and device tree bindings for the Qualcomm
PMIC MPP pin controller and GPIO.
- Some ACPI infrastructure for pin controllers.
- New driver for the Intel CherryView/Braswell pin controller,
the first Intel pin controller to fully take advantage of
the pin control subsystem.
- Support the Freescale i.MX VF610 variant.
- Support the sunxi A80 variant.
- Support the Samsung Exynos 4415 and Exynos 7 variants.
- Split out Intel pin controllers to their own subdirectory.
- A large slew of rockchip pin control updates, including
suspend/resume support.
- A large slew of Samsung Exynos pin controller updates.
- Various minor updates and fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=sxpe
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control changes from Linus Walleij:
"Here is a stash of pin control changes I have collected for the v3.19
series. Mainly new hardware support, with Intels new embedded SoC as
the especially interesting thing standing out, fully using the
subsystem.
- Force conversion of the ux500 pin control device trees and parsers
to use the generic pin control bindings.
- New driver and device tree bindings for the Qualcomm PMIC MPP pin
controller and GPIO.
- Some ACPI infrastructure for pin controllers.
- New driver for the Intel CherryView/Braswell pin controller, the
first Intel pin controller to fully take advantage of the pin
control subsystem.
- Support the Freescale i.MX VF610 variant.
- Support the sunxi A80 variant.
- Support the Samsung Exynos 4415 and Exynos 7 variants.
- Split out Intel pin controllers to their own subdirectory.
- A large slew of rockchip pin control updates, including
suspend/resume support.
- A large slew of Samsung Exynos pin controller updates.
- Various minor updates and fixes"
* tag 'pinctrl-v3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (49 commits)
pinctrl: at91: enhance (debugfs) at91_gpio_dbg_show
pinctrl: meson: add device tree bindings documentation
gpio: tz1090: Fix error handling of irq_of_parse_and_map
pinctrl: tz1090-pinctrl.txt: Fix typo in binding
pinctrl: pinconf-generic: Declare dt_params/conf_items const
pinctrl: exynos: Add support for Exynos4415
pinctrl: exynos: Add initial driver data for Exynos7
pinctrl: exynos: Add irq_chip instance for Exynos7 wakeup interrupts
pinctrl: exynos: Consolidate irq domain callbacks
pinctrl: exynos: Generalize the eint16_31 demux code
pinctrl: samsung: Separate per-bank init and runtime data
pinctrl: samsung: Constify samsung_pin_ctrl struct
pinctrl: samsung: Constify samsung_pin_bank_type struct
pinctrl: samsung: Drop unused label field in samsung_pin_ctrl struct
pinctrl: samsung: Make samsung_pinctrl_get_soc_data use ERR_PTR()
pinctrl: Add Intel Cherryview/Braswell pin controller support
gpio / ACPI: Add knowledge about pin controllers to acpi_get_gpiod()
pinctrl: Fix path error in documentation
pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume
pinctrl: rockchip: add suspend/resume functions
...
|
||
|
Linus Torvalds
|
92a578b064 |
ACPI and power management updates for 3.19-rc1
This time we have some more new material than we used to have during
the last couple of development cycles.
The most important part of it to me is the introduction of a unified
interface for accessing device properties provided by platform
firmware. It works with Device Trees and ACPI in a uniform way and
drivers using it need not worry about where the properties come
from as long as the platform firmware (either DT or ACPI) makes
them available. It covers both devices and "bare" device node
objects without struct device representation as that turns out to
be necessary in some cases. This has been in the works for quite
a few months (and development cycles) and has been approved by
all of the relevant maintainers.
On top of that, some drivers are switched over to the new interface
(at25, leds-gpio, gpio_keys_polled) and some additional changes are
made to the core GPIO subsystem to allow device drivers to manipulate
GPIOs in the "canonical" way on platforms that provide GPIO information
in their ACPI tables, but don't assign names to GPIO lines (in which
case the driver needs to do that on the basis of what it knows about
the device in question). That also has been approved by the GPIO
core maintainers and the rfkill driver is now going to use it.
Second is support for hardware P-states in the intel_pstate driver.
It uses CPUID to detect whether or not the feature is supported by
the processor in which case it will be enabled by default. However,
it can be disabled entirely from the kernel command line if necessary.
Next is support for a platform firmware interface based on ACPI
operation regions used by the PMIC (Power Management Integrated
Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms.
That interface is used for manipulating power resources and for
thermal management: sensor temperature reporting, trip point setting
and so on.
Also the ACPI core is now going to support the _DEP configuration
information in a limited way. Basically, _DEP it supposed to reflect
off-the-hierarchy dependencies between devices which may be very
indirect, like when AML for one device accesses locations in an
operation region handled by another device's driver (usually, the
device depended on this way is a serial bus or GPIO controller).
The support added this time is sufficient to make the ACPI battery
driver work on Asus T100A, but it is general enough to be able to
cover some other use cases in the future.
Finally, we have a new cpufreq driver for the Loongson1B processor.
In addition to the above, there are fixes and cleanups all over the
place as usual and a traditional ACPICA update to a recent upstream
release.
As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver
for Intel platforms should be able to handle power management of
the DMA engine correctly, the cpufreq-dt driver should interact
with the thermal subsystem in a better way and the ACPI backlight
driver should handle some more corner cases, among other things.
On top of the ACPICA update there are fixes for race conditions
in the ACPICA's interrupt handling code which might lead to some
random and strange looking failures on some systems.
In the cleanups department the most visible part is the series
of commits targeted at getting rid of the CONFIG_PM_RUNTIME
configuration option. That was triggered by a discussion
regarding the generic power domains code during which we realized
that trying to support certain combinations of PM config options
was painful and not really worth it, because nobody would use them
in production anyway. For this reason, we decided to make
CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the
conclusion that the latter became redundant and CONFIG_PM could
be used instead of it. The material here makes that replacement
in a major part of the tree, but there will be at least one more
batch of that in the second part of the merge window.
Specifics:
- Support for retrieving device properties information from ACPI
_DSD device configuration objects and a unified device properties
interface for device drivers (and subsystems) on top of that.
As stated above, this works with Device Trees and ACPI and allows
device drivers to be written in a platform firmware (DT or ACPI)
agnostic way. The at25, leds-gpio and gpio_keys_polled drivers
are now going to use this new interface and the GPIO subsystem
is additionally modified to allow device drivers to assign names
to GPIO resources returned by ACPI _CRS objects (in case _DSD is
not present or does not provide the expected data). The changes
in this set are mostly from Mika Westerberg, Rafael J Wysocki,
Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam,
Geert Uytterhoeven).
- Support for Hardware Managed Performance States (HWP) as described
in Volume 3, section 14.4, of the Intel SDM in the intel_pstate
driver. CPUID is used to detect whether or not the feature is
supported by the processor. If supported, it will be enabled
automatically unless the intel_pstate=no_hwp switch is present in
the kernel command line. From Dirk Brandewie.
- New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie).
- Support for firmware interface based on ACPI operation regions
used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR
platforms for power resource control and thermal management
(Aaron Lu).
- Limited support for retrieving off-the-hierarchy dependencies
between devices from ACPI _DEP device configuration objects
and deferred probing support for the ACPI battery driver based
on the _DEP information to make that driver work on Asus T100A
(Lan Tianyu).
- New cpufreq driver for the Loongson1B processor (Kelvin Cheung).
- ACPICA update to upstream revision 20141107 which only affects
tools (Bob Moore).
- Fixes for race conditions in the ACPICA's interrupt handling
code and in the ACPI code related to system suspend and resume
(Lv Zheng and Rafael J Wysocki).
- ACPI core fix for an RCU-related issue in the ioremap() regions
management code that slowed down significantly after CPUs had
been allowed to enter idle states even if they'd had RCU callbakcs
queued and triggered some problems in certain proprietary graphics
driver (and elsewhere). The fix replaces synchronize_rcu() in
that code with synchronize_rcu_expedited() which makes the issue
go away. From Konstantin Khlebnikov.
- ACPI LPSS (Low-Power Subsystem) driver fix to handle power
management of the DMA engine included into the LPSS correctly.
The problem is that the DMA engine doesn't have ACPI PM support
of its own and it simply is turned off when the last LPSS device
having ACPI PM support goes into D3cold. To work around that,
the PM domain used by the ACPI LPSS driver is redesigned so at
least one device with ACPI PM support will be on as long as the
DMA engine is in use. From Andy Shevchenko.
- ACPI backlight driver fix to avoid using it on "Win8-compatible"
systems where it doesn't work and where it was used by default by
mistake (Aaron Lu).
- Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki,
Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and
Ashwin Chaugule (mostly related to the upcoming ARM64 support).
- Intel RAPL (Running Average Power Limit) power capping driver
fixes and improvements including new processor IDs (Jacob Pan).
- Generic power domains modification to power up domains after
attaching devices to them to meet the expectations of device
drivers and bus types assuming devices to be accessible at
probe time (Ulf Hansson).
- Preliminary support for controlling device clocks from the
generic power domains core code and modifications of the
ARM/shmobile platform to use that feature (Ulf Hansson).
- Assorted minor fixes and cleanups of the generic power
domains core code (Ulf Hansson, Geert Uytterhoeven).
- Assorted minor fixes and cleanups of the device clocks control
code in the PM core (Geert Uytterhoeven, Grygorii Strashko).
- Consolidation of device power management Kconfig options by making
CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter
which is now redundant (Rafael J Wysocki and Kevin Hilman). That
is the first batch of the changes needed for this purpose.
- Core device runtime power management support code cleanup related
to the execution of callbacks (Andrzej Hajda).
- cpuidle ARM support improvements (Lorenzo Pieralisi).
- cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and
a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and
Bartlomiej Zolnierkiewicz).
- New cpufreq driver callback (->ready) to be executed when the
cpufreq core is ready to use a given policy object and cpufreq-dt
driver modification to use that callback for cooling device
registration (Viresh Kumar).
- cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu,
James Geboski, Tomeu Vizoso).
- Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate,
cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao,
Stefan Wahren, Petr Cvek).
- OPP (Operating Performance Points) framework modification to
allow OPPs to be removed too and update of a few cpufreq drivers
(cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added
during initialization) on driver removal (Viresh Kumar).
- Hibernation core fixes and cleanups (Tina Ruchandani and
Markus Elfring).
- PM Kconfig fix related to CPU power management (Pankaj Dubey).
- cpupower tool fix (Prarit Bhargava).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=5dox
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"This time we have some more new material than we used to have during
the last couple of development cycles.
The most important part of it to me is the introduction of a unified
interface for accessing device properties provided by platform
firmware. It works with Device Trees and ACPI in a uniform way and
drivers using it need not worry about where the properties come from
as long as the platform firmware (either DT or ACPI) makes them
available. It covers both devices and "bare" device node objects
without struct device representation as that turns out to be necessary
in some cases. This has been in the works for quite a few months (and
development cycles) and has been approved by all of the relevant
maintainers.
On top of that, some drivers are switched over to the new interface
(at25, leds-gpio, gpio_keys_polled) and some additional changes are
made to the core GPIO subsystem to allow device drivers to manipulate
GPIOs in the "canonical" way on platforms that provide GPIO
information in their ACPI tables, but don't assign names to GPIO lines
(in which case the driver needs to do that on the basis of what it
knows about the device in question). That also has been approved by
the GPIO core maintainers and the rfkill driver is now going to use
it.
Second is support for hardware P-states in the intel_pstate driver.
It uses CPUID to detect whether or not the feature is supported by the
processor in which case it will be enabled by default. However, it
can be disabled entirely from the kernel command line if necessary.
Next is support for a platform firmware interface based on ACPI
operation regions used by the PMIC (Power Management Integrated
Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms.
That interface is used for manipulating power resources and for
thermal management: sensor temperature reporting, trip point setting
and so on.
Also the ACPI core is now going to support the _DEP configuration
information in a limited way. Basically, _DEP it supposed to reflect
off-the-hierarchy dependencies between devices which may be very
indirect, like when AML for one device accesses locations in an
operation region handled by another device's driver (usually, the
device depended on this way is a serial bus or GPIO controller). The
support added this time is sufficient to make the ACPI battery driver
work on Asus T100A, but it is general enough to be able to cover some
other use cases in the future.
Finally, we have a new cpufreq driver for the Loongson1B processor.
In addition to the above, there are fixes and cleanups all over the
place as usual and a traditional ACPICA update to a recent upstream
release.
As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for
Intel platforms should be able to handle power management of the DMA
engine correctly, the cpufreq-dt driver should interact with the
thermal subsystem in a better way and the ACPI backlight driver should
handle some more corner cases, among other things.
On top of the ACPICA update there are fixes for race conditions in the
ACPICA's interrupt handling code which might lead to some random and
strange looking failures on some systems.
In the cleanups department the most visible part is the series of
commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration
option. That was triggered by a discussion regarding the generic
power domains code during which we realized that trying to support
certain combinations of PM config options was painful and not really
worth it, because nobody would use them in production anyway. For
this reason, we decided to make CONFIG_PM_SLEEP select
CONFIG_PM_RUNTIME and that lead to the conclusion that the latter
became redundant and CONFIG_PM could be used instead of it. The
material here makes that replacement in a major part of the tree, but
there will be at least one more batch of that in the second part of
the merge window.
Specifics:
- Support for retrieving device properties information from ACPI _DSD
device configuration objects and a unified device properties
interface for device drivers (and subsystems) on top of that. As
stated above, this works with Device Trees and ACPI and allows
device drivers to be written in a platform firmware (DT or ACPI)
agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are
now going to use this new interface and the GPIO subsystem is
additionally modified to allow device drivers to assign names to
GPIO resources returned by ACPI _CRS objects (in case _DSD is not
present or does not provide the expected data). The changes in
this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron
Lu, and Darren Hart with some fixes from others (Fabio Estevam,
Geert Uytterhoeven).
- Support for Hardware Managed Performance States (HWP) as described
in Volume 3, section 14.4, of the Intel SDM in the intel_pstate
driver. CPUID is used to detect whether or not the feature is
supported by the processor. If supported, it will be enabled
automatically unless the intel_pstate=no_hwp switch is present in
the kernel command line. From Dirk Brandewie.
- New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie).
- Support for firmware interface based on ACPI operation regions used
by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR
platforms for power resource control and thermal management (Aaron
Lu).
- Limited support for retrieving off-the-hierarchy dependencies
between devices from ACPI _DEP device configuration objects and
deferred probing support for the ACPI battery driver based on the
_DEP information to make that driver work on Asus T100A (Lan
Tianyu).
- New cpufreq driver for the Loongson1B processor (Kelvin Cheung).
- ACPICA update to upstream revision 20141107 which only affects
tools (Bob Moore).
- Fixes for race conditions in the ACPICA's interrupt handling code
and in the ACPI code related to system suspend and resume (Lv Zheng
and Rafael J Wysocki).
- ACPI core fix for an RCU-related issue in the ioremap() regions
management code that slowed down significantly after CPUs had been
allowed to enter idle states even if they'd had RCU callbakcs
queued and triggered some problems in certain proprietary graphics
driver (and elsewhere). The fix replaces synchronize_rcu() in that
code with synchronize_rcu_expedited() which makes the issue go
away. From Konstantin Khlebnikov.
- ACPI LPSS (Low-Power Subsystem) driver fix to handle power
management of the DMA engine included into the LPSS correctly. The
problem is that the DMA engine doesn't have ACPI PM support of its
own and it simply is turned off when the last LPSS device having
ACPI PM support goes into D3cold. To work around that, the PM
domain used by the ACPI LPSS driver is redesigned so at least one
device with ACPI PM support will be on as long as the DMA engine is
in use. From Andy Shevchenko.
- ACPI backlight driver fix to avoid using it on "Win8-compatible"
systems where it doesn't work and where it was used by default by
mistake (Aaron Lu).
- Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki,
Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin
Chaugule (mostly related to the upcoming ARM64 support).
- Intel RAPL (Running Average Power Limit) power capping driver fixes
and improvements including new processor IDs (Jacob Pan).
- Generic power domains modification to power up domains after
attaching devices to them to meet the expectations of device
drivers and bus types assuming devices to be accessible at probe
time (Ulf Hansson).
- Preliminary support for controlling device clocks from the generic
power domains core code and modifications of the ARM/shmobile
platform to use that feature (Ulf Hansson).
- Assorted minor fixes and cleanups of the generic power domains core
code (Ulf Hansson, Geert Uytterhoeven).
- Assorted minor fixes and cleanups of the device clocks control code
in the PM core (Geert Uytterhoeven, Grygorii Strashko).
- Consolidation of device power management Kconfig options by making
CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter
which is now redundant (Rafael J Wysocki and Kevin Hilman). That
is the first batch of the changes needed for this purpose.
- Core device runtime power management support code cleanup related
to the execution of callbacks (Andrzej Hajda).
- cpuidle ARM support improvements (Lorenzo Pieralisi).
- cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a
new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and
Bartlomiej Zolnierkiewicz).
- New cpufreq driver callback (->ready) to be executed when the
cpufreq core is ready to use a given policy object and cpufreq-dt
driver modification to use that callback for cooling device
registration (Viresh Kumar).
- cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James
Geboski, Tomeu Vizoso).
- Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate,
cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao,
Stefan Wahren, Petr Cvek).
- OPP (Operating Performance Points) framework modification to allow
OPPs to be removed too and update of a few cpufreq drivers
(cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added
during initialization) on driver removal (Viresh Kumar).
- Hibernation core fixes and cleanups (Tina Ruchandani and Markus
Elfring).
- PM Kconfig fix related to CPU power management (Pankaj Dubey).
- cpupower tool fix (Prarit Bhargava)"
* tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits)
i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c
dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
tools: cpupower: fix return checks for sysfs_get_idlestate_count()
drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME
MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
leds: leds-gpio: Fix multiple instances registration without 'label' property
iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
hwrandom / exynos / PM: Use CONFIG_PM in #ifdef
block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
USB / PM: Drop CONFIG_PM_RUNTIME from the USB core
PM: Merge the SET*_RUNTIME_PM_OPS() macros
...
|
||
|
Linus Torvalds
|
c75059c462 |
PCI changes for the v3.19 merge window:
NUMA
- Allow numa_node override via sysfs (Prarit Bhargava)
Resource management
- Restore detection of read-only BARs (Myron Stowe)
- Shrink decoding-disabled window while sizing BARs (Myron Stowe)
- Add informational printk for invalid BARs (Myron Stowe)
- Remove fixed parameter in pci_iov_resource_bar() (Myron Stowe)
MSI
- Add pci_msi_ignore_mask to prevent writes to MSI/MSI-X Mask Bits (Yijing Wang)
- Revert "PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq()" (Yijing Wang)
- s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq() (Yijing Wang)
Virtualization
- xen: Process failure for pcifront_(re)scan_root() (Chen Gang)
- Make FLR and AF FLR reset warning messages different (Gavin Shan)
Generic host bridge driver
- Allocate config space windows after limiting bus number range (Lorenzo Pieralisi)
- Convert to DT resource parsing API (Lorenzo Pieralisi)
Freescale Layerscape
- Add Freescale Layerscape PCIe driver (Minghuan Lian)
NVIDIA Tegra
- Do not build on 64-bit ARM (Thierry Reding)
- Add Kconfig help text (Thierry Reding)
Renesas R-Car
- Make rcar_pci static (Jingoo Han)
Samsung Exynos
- Add exynos prefix to add_pcie_port(), pcie_init() (Jingoo Han)
ST Microelectronics SPEAr13xx
- Add spear prefix to add_pcie_port(), pcie_init() (Jingoo Han)
- Make spear13xx_add_pcie_port() __init (Jingoo Han)
- Remove unnecessary OOM message (Jingoo Han)
TI DRA7xx
- Add dra7xx prefix to add_pcie_port() (Jingoo Han)
- Make dra7xx_add_pcie_port() __init (Jingoo Han)
TI Keystone
- Make ks_dw_pcie_msi_domain_ops static (Jingoo Han)
- Remove unnecessary OOM message (Jingoo Han)
Miscellaneous
- Delete unnecessary NULL pointer checks (Markus Elfring)
- Remove unused to_hotplug_slot() (Gavin Shan)
- Whitespace cleanup (Jingoo Han)
- Simplify if-return sequences (Quentin Lambert)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kKg9
-----END PGP SIGNATURE-----
Merge tag 'pci-v3.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI changes from Bjorn Helgaas:
"Here are the PCI changes intended for v3.19. I don't think there's
anything very exciting here, but there was a lot of MSI-related stuff
coming via Thomas.
Details:
NUMA
- Allow numa_node override via sysfs (Prarit Bhargava)
Resource management
- Restore detection of read-only BARs (Myron Stowe)
- Shrink decoding-disabled window while sizing BARs (Myron Stowe)
- Add informational printk for invalid BARs (Myron Stowe)
- Remove fixed parameter in pci_iov_resource_bar() (Myron Stowe)
MSI
- Add pci_msi_ignore_mask to prevent writes to MSI/MSI-X Mask Bits (Yijing Wang)
- Revert "PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq()" (Yijing Wang)
- s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq() (Yijing Wang)
Virtualization
- xen: Process failure for pcifront_(re)scan_root() (Chen Gang)
- Make FLR and AF FLR reset warning messages different (Gavin Shan)
Generic host bridge driver
- Allocate config space windows after limiting bus number range (Lorenzo Pieralisi)
- Convert to DT resource parsing API (Lorenzo Pieralisi)
Freescale Layerscape
- Add Freescale Layerscape PCIe driver (Minghuan Lian)
NVIDIA Tegra
- Do not build on 64-bit ARM (Thierry Reding)
- Add Kconfig help text (Thierry Reding)
Renesas R-Car
- Make rcar_pci static (Jingoo Han)
Samsung Exynos
- Add exynos prefix to add_pcie_port(), pcie_init() (Jingoo Han)
ST Microelectronics SPEAr13xx
- Add spear prefix to add_pcie_port(), pcie_init() (Jingoo Han)
- Make spear13xx_add_pcie_port() __init (Jingoo Han)
- Remove unnecessary OOM message (Jingoo Han)
TI DRA7xx
- Add dra7xx prefix to add_pcie_port() (Jingoo Han)
- Make dra7xx_add_pcie_port() __init (Jingoo Han)
TI Keystone
- Make ks_dw_pcie_msi_domain_ops static (Jingoo Han)
- Remove unnecessary OOM message (Jingoo Han)
Miscellaneous
- Delete unnecessary NULL pointer checks (Markus Elfring)
- Remove unused to_hotplug_slot() (Gavin Shan)
- Whitespace cleanup (Jingoo Han)
- Simplify if-return sequences (Quentin Lambert)"
* tag 'pci-v3.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (28 commits)
PCI: Remove fixed parameter in pci_iov_resource_bar()
PCI: Add informational printk for invalid BARs
PCI: tegra: Add Kconfig help text
PCI: tegra: Do not build on 64-bit ARM
PCI: spear: Remove unnecessary OOM message
PCI: mvebu: Add a blank line after declarations
PCI: designware: Add a blank line after declarations
PCI: exynos: Remove unnecessary return statement
PCI: imx6: Use tabs for indentation
PCI: keystone: Remove unnecessary OOM message
PCI: Remove unused and broken to_hotplug_slot()
PCI: Make FLR and AF FLR reset warning messages different
PCI: dra7xx: Add __init annotation to dra7xx_add_pcie_port()
PCI: spear: Add __init annotation to spear13xx_add_pcie_port()
PCI: spear: Rename add_pcie_port(), pcie_init() to spear13xx_add_pcie_port(), etc.
PCI: dra7xx: Rename add_pcie_port() to dra7xx_add_pcie_port()
PCI: layerscape: Add Freescale Layerscape PCIe driver
PCI: Simplify if-return sequences
PCI: Delete unnecessary NULL pointer checks
PCI: Shrink decoding-disabled window while sizing BARs
...
|
||
|
Linus Torvalds
|
f74ea36848 |
The following ktest updates were done:
o Fix handling the make kernelrelease change
o Fix make_min_config that was broken by new bisect_config changes
o Allow tests to undefine default options (not just being able to override
them)
o Print name of test (if defined) to start of test output
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUheY3AAoJEEjnJuOKh9ld+CgH/16NxltuIVFMTDB+I7AP/ixV
YP2m4dGn0wrzg8GhZNJX7x9irh8Shg5da4mjqH163qylNfQl7QuALzs5c7B3ZDv3
dQa2GMR34/bUbcqejrZm7fcwRH8yw1E88hAs71CNM+PMW1AAe8CBth2ogCXC/V8N
uln7Fr0aS3Y/sPxWzkCp4Y8ZAsoRMei3igfnJUPu0a1p7pyKaN0ne060S5znWYwl
8fW4DACR1EppMmfwdslORN9miPol4nuBQICmqNM6shtJaef6yb9aErSiTTT4m4PK
RIpWZasmosKBIeIkTXWxLhr3liEFTMm3BsflD+YUnIM7cLFziHGDp6ThH3TwwSo=
=Y3vY
-----END PGP SIGNATURE-----
Merge tag 'ktest-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest changes from Steven Rostedt:
"The following ktest updates were done:
- Fix handling the make kernelrelease change
- Fix make_min_config that was broken by new bisect_config changes
- Allow tests to undefine default options (not just being able to
override them)
- Print name of test (if defined) to start of test output"
* tag 'ktest-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Add back "tail -1" to kernelrelease make
ktest: Add name to running title
ktest: Allow tests to undefine default options
ktest: Fix make_min_config to handle new assign_configs call
ktest: Use make -s kernelrelease
|
||
|
David S. Miller
|
52c9b12d38 |
Merge branch 'fec-next'
Fugang Duan says: ==================== net: fec: driver code clean and bug fix The patch serial include code clean and bug fix: Patch#1: avoid dummy operation during suspend/resume test. Patch#2: bug fix for i.MX6SX SOC that clean all interrupt events during MAC initial process. Patch#3: before phy device link status is up, only enable MDIO bus interrupt. V2: - Modify the comment form from David's suggestion. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Nimrod Andy
|
0c5a3aef9f |
net: fec: only enable mdio interrupt before phy device link up
Before phy device link up, we only enable FEC mdio interrupt, which is more reasonable. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Nimrod Andy
|
e17f7fecdd |
net: fec: clear all interrupt events to support i.MX6SX
For i.MX6SX FEC controller, there have interrupt mask and event field extension. To support all SOCs FEC, we clear all interrupt events during MAVC initial process. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Nimrod Andy
|
858eeb7d9c |
net: fec: reset fep link status in suspend function
On some i.MX6 serial boards, phy power and refrence clock are supplied
or controlled by SOC. When do suspend/resume test, the power and clock
are disabled, so phy device link down.
For current driver, fep->link is still up status, which cause extra operation
like below code. To avoid the dumy operation, we set fep->link to down when
phy device is real down.
...
if (fep->link) {
napi_disable(&fep->napi);
netif_tx_lock_bh(ndev);
fec_stop(ndev);
netif_tx_unlock_bh(ndev);
napi_enable(&fep->napi);
fep->link = phy_dev->link;
status_change = 1;
}
...
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Linus Torvalds
|
350e4f4985 |
This code is a fork from the trace-3.19 pull as it needed the trace_seq
clean ups from that branch.
This code solves the issue of performing stack dumps from NMI context.
The issue is that printk() is not safe from NMI context as if the NMI
were to trigger when a printk() was being performed, the NMI could
deadlock from the printk() internal locks. This has been seen in practice.
With lots of review from Petr Mladek, this code went through several
iterations, and we feel that it is now at a point of quality to be
accepted into mainline.
Here's what is contained in this patch set:
o Creates a "seq_buf" generic buffer utility that allows a descriptor
to be passed around where functions can write their own "printk()"
formatted strings into it. The generic version was pulled out of
the trace_seq() code that was made specifically for tracing.
o The seq_buf code was change to model the seq_file code. I have
a patch (not included for 3.19) that converts the seq_file.c code
over to use seq_buf.c like the trace_seq.c code does. This was done
to make sure that seq_buf.c is compatible with seq_file.c. I may
try to get that patch in for 3.20.
o The seq_buf.c file was moved to lib/ to remove it from being dependent
on CONFIG_TRACING.
o The printk() was updated to allow for a per_cpu "override" of
the internal calls. That is, instead of writing to the console, a call
to printk() may do something else. This made it easier to allow the
NMI to change what printk() does in order to call dump_stack() without
needing to update that code as well.
o Finally, the dump_stack from all CPUs via NMI code was converted to
use the seq_buf code. The caller to trigger the NMI code would wait
till all the NMIs finished, and then it would print the seq_buf
data to the console safely from a non NMI context.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUhbrnAAoJEEjnJuOKh9ldsCoIAJ3sKIJ5B3jxJJTCHPAx/lZD
GVbV1J1mu4kTAZuhJZOAxW8D6PZGZMyEjg0y6ScDEnBGcjAZ9gTiWCdakPktf9EX
GfaPPqwiL9dZ18J9Qc6uR+7M1Ffpzzwbcc6lJrpoTcjRgkoH9wCiLS9ozFQyYzWb
/7m5UbUM/PIk9WAjLYXPW6UUVtPTPT0RdEQKofMGTeah+vgqj4TXCOROdlxsXXWF
77vqBvPd5TUPWFH9ftzJGDtZS8SroXVKCu3fZIqHgzAU0yqwVtH/JzDTy9u2UYhX
GzDEPeAIdp6m6Uyc406VuIf1QW0gfBgmA0ir80vFoP27uFMM6j5HlF7azgQfx34=
=YBgA
-----END PGP SIGNATURE-----
Merge tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull nmi-safe seq_buf printk update from Steven Rostedt:
"This code is a fork from the trace-3.19 pull as it needed the
trace_seq clean ups from that branch.
This code solves the issue of performing stack dumps from NMI context.
The issue is that printk() is not safe from NMI context as if the NMI
were to trigger when a printk() was being performed, the NMI could
deadlock from the printk() internal locks. This has been seen in
practice.
With lots of review from Petr Mladek, this code went through several
iterations, and we feel that it is now at a point of quality to be
accepted into mainline.
Here's what is contained in this patch set:
- Creates a "seq_buf" generic buffer utility that allows a descriptor
to be passed around where functions can write their own "printk()"
formatted strings into it. The generic version was pulled out of
the trace_seq() code that was made specifically for tracing.
- The seq_buf code was change to model the seq_file code. I have a
patch (not included for 3.19) that converts the seq_file.c code
over to use seq_buf.c like the trace_seq.c code does. This was
done to make sure that seq_buf.c is compatible with seq_file.c. I
may try to get that patch in for 3.20.
- The seq_buf.c file was moved to lib/ to remove it from being
dependent on CONFIG_TRACING.
- The printk() was updated to allow for a per_cpu "override" of the
internal calls. That is, instead of writing to the console, a call
to printk() may do something else. This made it easier to allow
the NMI to change what printk() does in order to call dump_stack()
without needing to update that code as well.
- Finally, the dump_stack from all CPUs via NMI code was converted to
use the seq_buf code. The caller to trigger the NMI code would
wait till all the NMIs finished, and then it would print the
seq_buf data to the console safely from a non NMI context
One added bonus is that this code also makes the NMI dump stack work
on PREEMPT_RT kernels. As printk() includes sleeping locks on
PREEMPT_RT, printk() only writes to console if the console does not
use any rt_mutex converted spin locks. Which a lot do"
* tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
x86/nmi: Fix use of unallocated cpumask_var_t
printk/percpu: Define printk_func when printk is not defined
x86/nmi: Perform a safe NMI stack trace on all CPUs
printk: Add per_cpu printk func to allow printk to be diverted
seq_buf: Move the seq_buf code to lib/
seq-buf: Make seq_buf_bprintf() conditional on CONFIG_BINARY_PRINTF
tracing: Add seq_buf_get_buf() and seq_buf_commit() helper functions
tracing: Have seq_buf use full buffer
seq_buf: Add seq_buf_can_fit() helper function
tracing: Add paranoid size check in trace_printk_seq()
tracing: Use trace_seq_used() and seq_buf_used() instead of len
tracing: Clean up tracing_fill_pipe_page()
seq_buf: Create seq_buf_used() to find out how much was written
tracing: Add a seq_buf_clear() helper and clear len and readpos in init
tracing: Convert seq_buf fields to be like seq_file fields
tracing: Convert seq_buf_path() to be like seq_path()
tracing: Create seq_buf layer in trace_seq
|
||
Alexei Starovoitov
|
198bf1b046 |
net: sock: fix access via invalid file descriptor
0day robot reported the following crash:
[ 21.233581] BUG: unable to handle kernel NULL pointer dereference at 0000000000000007
[ 21.234709] IP: [<ffffffff8156ebda>] sk_attach_bpf+0x39/0xc2
It's due to bpf_prog_get() returning ERR_PTR.
Check it properly.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Fixes:
|
||
|
Linus Torvalds
|
c32809521d |
Updates for the ftrace self tests:
o Added kprobes on ftrace testcase o Sort test cases o Add file to hold helper functions o Use logfile name supported by busybox's mktemp o Clear trace buffer after running kprobe test o Fix show descriptions when run on dash shell o Add --verbose option for showing echo output -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJUhbSvAAoJEEjnJuOKh9ldB84H+gNuE2PPvsxmgSxFP0bdo+Uw k/8C2QBU6xLXZFZvqXnH7P0gLP2OIjpOBOTKt+yjkB/Elm+XnMVV1Xy+k7VLBiMD g+DRoIcpJL2dOy/D8t/P4SjVNXt4Btwxf/tCTabbubLc+aBmvkEG4DL2Vk/Xl5+Y XH1dBgYvI9irAxgnYpBnPlN7WIWg1+WCshdOtqkNGRuyJ1G9gn0VlxGmNF7B+0ye cjFj19loPMGzmYBDgGCa9ypQHEP1F97t+WUEDrwCZsXLtaA7Z4bumXTrxKQWsmdT bDZQTEFcQ9EYQGvqbaz+nHb94P8cyFrSNvSiAAqhuc2ZqigYWUYDEvFjYxSSGAE= =eiD2 -----END PGP SIGNATURE----- Merge tag 'ftracetest-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace self-test updates from Steven Rostedt: "Updates for the ftrace self tests: - Added kprobes on ftrace testcase - Sort test cases - Add file to hold helper functions - Use logfile name supported by busybox's mktemp - Clear trace buffer after running kprobe test - Fix show descriptions when run on dash shell - Add --verbose option for showing echo output" * tag 'ftracetest-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftracetest: Add --verbose option for showing echo output ftracetest: Fix to show descriptions on dash ftracetest: Add basic event tracing test cases ftracetest: Clear trace buffer after running kprobe testcases ftracetest: Use logfile name supported by busybox's mktemp ftracetest: Add a couple of ftrace test cases ftracetest: Add functions file that holds helper functions ftracetest: Sort testcases ftracetest: Add kprobes on ftrace testcase |
||
|
Linus Torvalds
|
1dd7dcb6ea |
There was a lot of clean ups and minor fixes. One of those clean ups was
to the trace_seq code. It also removed the return values to the
trace_seq_*() functions and use trace_seq_has_overflowed() to see if
the buffer filled up or not. This is similar to work being done to the
seq_file code as well in another tree.
Some of the other goodies include:
o Added some "!" (NOT) logic to the tracing filter.
o Fixed the frame pointer logic to the x86_64 mcount trampolines
o Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems.
That is, the ftrace trampoline can be dynamically allocated
and be called directly by functions that only have a single hook
to them.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUhbLGAAoJEEjnJuOKh9ldRV4H/3NcLbgGB2iu96la1zdYE6pG
Q7cDJMxXK80YIIL70h9G0IItcD4t62LMb72lfBnMGRj3msgFb3AgISW57EuI0Pxk
xk24wuIPoTG2S7v9sc3SboNFwO8qbtIjxD2OBmqIUrGo2sZIiGjyj3gX7mCY3uzL
WB2bUOSFz/22OgaANinR5EELHA3pZZCf54Vz1K9ndmtK0xp0j1a7xJShD6TrMdYv
mZ3zH5ViIhW4A3mdcMceh6fy2JLQAiEKF0uPTvcMMz7NlVul0mxyL/+10P7AE/3R
Ehw4fzmm4NDshPDtBOkKH0LsppgXzuItFuQUTpact3JlqTg++bV6onSsrkt1hlY=
=Z7Cm
-----END PGP SIGNATURE-----
Merge tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"There was a lot of clean ups and minor fixes. One of those clean ups
was to the trace_seq code. It also removed the return values to the
trace_seq_*() functions and use trace_seq_has_overflowed() to see if
the buffer filled up or not. This is similar to work being done to
the seq_file code as well in another tree.
Some of the other goodies include:
- Added some "!" (NOT) logic to the tracing filter.
- Fixed the frame pointer logic to the x86_64 mcount trampolines
- Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems.
That is, the ftrace trampoline can be dynamically allocated and be
called directly by functions that only have a single hook to them"
* tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (55 commits)
tracing: Truncated output is better than nothing
tracing: Add additional marks to signal very large time deltas
Documentation: describe trace_buf_size parameter more accurately
tracing: Allow NOT to filter AND and OR clauses
tracing: Add NOT to filtering logic
ftrace/fgraph/x86: Have prepare_ftrace_return() take ip as first parameter
ftrace/x86: Get rid of ftrace_caller_setup
ftrace/x86: Have save_mcount_regs macro also save stack frames if needed
ftrace/x86: Add macro MCOUNT_REG_SIZE for amount of stack used to save mcount regs
ftrace/x86: Simplify save_mcount_regs on getting RIP
ftrace/x86: Have save_mcount_regs store RIP in %rdi for first parameter
ftrace/x86: Rename MCOUNT_SAVE_FRAME and add more detailed comments
ftrace/x86: Move MCOUNT_SAVE_FRAME out of header file
ftrace/x86: Have static tracing also use ftrace_caller_setup
ftrace/x86: Have static function tracing always test for function graph
kprobes: Add IPMODIFY flag to kprobe_ftrace_ops
ftrace, kprobes: Support IPMODIFY flag to find IP modify conflict
kprobes/ftrace: Recover original IP if pre_handler doesn't change it
tracing/trivial: Fix typos and make an int into a bool
tracing: Deletion of an unnecessary check before iput()
...
|
||
Gu Zheng
|
f95b414edb |
net: introduce helper macro for_each_cmsghdr
Introduce helper macro for_each_cmsghdr as a wrapper of the enumerating cmsghdr from msghdr, just cleanup. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> |