* commit '5c34a4e89c743339f78cafb2f2a826a010f0746a':
ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
ARM: uniphier: drop code for old DT binding
These cause a harmless conflict with the clps711x multiplatform
support, and it's easy to resolve.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Any CLPS711X-based board can be replaced with devicetree equivalent.
Remove the board files.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds basic support to run Cirrus Logic ARMv4T CPUs
with device-tree support.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Last CLPS711X CPU register is PLLR has 0xa5a8 address, so we can reduce
the map to 48k and align the end of the static at VMALLOC_START.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series of DSS platform_data fixes to prepare for DSS driver changes
- Add tblck clck aliases for PWM
- A series of trivial spelling corrections
- Remove bogus eQEP, ePWM and eCAP hwmod entries
- A series of McBSP sidetone fixes
- Remove QSPI and DSS addresses from hwmod, these come from dts
- Fix RSTST register offset for pruss
- Make ti81xx_rtc_hwmod static
- Remove wrongly defined RSTST offset for PER Domain, note
that the subject for this one wrongly has "dts" in the
subject
- Add support for omap5 and dra7 workaround for 801819
- A series of patches to make kexec work for SMP omaps
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=d4B3
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.8/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
SoC related changes for omaps for v4.8 merge window:
- A series of DSS platform_data fixes to prepare for DSS driver changes
- Add tblck clck aliases for PWM
- A series of trivial spelling corrections
- Remove bogus eQEP, ePWM and eCAP hwmod entries
- A series of McBSP sidetone fixes
- Remove QSPI and DSS addresses from hwmod, these come from dts
- Fix RSTST register offset for pruss
- Make ti81xx_rtc_hwmod static
- Remove wrongly defined RSTST offset for PER Domain, note
that the subject for this one wrongly has "dts" in the
subject
- Add support for omap5 and dra7 workaround for 801819
- A series of patches to make kexec work for SMP omaps
* tag 'omap-for-v4.8/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (30 commits)
ARM: OMAP2+: Fix build if CONFIG_SMP is not set
ARM: OMAP4+: Allow kexec on SMP variants
ARM: OMAP4+: Reset CPU1 properly for kexec
ARM: OMAP4+: Prevent CPU1 related hang with kexec
ARM: OMAP4+: Initialize SAR RAM base early for proper CPU1 reset for kexec
ARM: dts: am43xx: Remove wrongly defined RSTST offset for PER Domain
ARM: OMAP: make ti81xx_rtc_hwmod static
ARM: AM43XX: hwmod: Fix RSTST register offset for pruss
ARM: DRA7: hwmod: remove DSS addresses from hwmod
ARM: DRA7: hwmod: Remove QSPI address space entry from hwmod
ARM: OMAP2+: McBSP: Remove the old iclk allow/deny idle code
ASoC: omap-mcbsp: sidetone: Use the new callback for iclk handling
ASoC: omap-mcbsp: Rename omap_mcbsp_sysfs_remove() to omap_mcbsp_cleanup()
ARM: OMAP3: pdata-quirks: Add support for McBSP2/3 sidetone handling
ARM: OMAP3: McBSP: New callback for McBSP2/3 ICLK idle configuration
ARM: OMAP3: hwmod data: Fix McBSP2/3 sidetone data
ARM: AM335x/AM437x: hwmod: Remove eQEP, ePWM and eCAP hwmod entries
ARM: OMAP2+: Fix typo in sdrc.h
ARM: OMAP2+: Fix typo in omap_device.c
ARM: OMAP2+: Fix typo in omap4-common.c
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Since the SP804 timer changes will not been merged upstream, switch the
default OX810SE config to the OXNAS RPS Timer driver configuration.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- A patch series including both cpuidle and FEC driver changes to
disable deeper idle states when FEC is active while board level
workaround for ERR006687 is not available
- A number patches to fix sparse warnings and spell errors
- A fix for TZIC FIQ translation from VIRQ to HWIRQ
- Support compatible of i.MX7 Solo SoC which has a subset of i.MX7 Dual
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXcmFTAAoJEFBXWFqHsHzOxXoH/A5B4yRv82dM9L6KcCYqxc8B
UL8Rt11mMsezj/mSoikPjdDV7rKRcbSyY7ujUs0g9jhdKzl2sCCu9rXtYN+oeDpH
iJrndyQ8+Y0UDitmvZGwyW5HImUKuoMvFjJpg7D3WGs/2wACj9TVrrNl+AWawZXR
B+mNO6vT3MEnflzFKkcZmYhwtMXPmaGDc732pS6sgqBLjAJp8X37wWoWJ2lVG9zf
8fjEfUcB3jqWFr6YYJk/adWEjFwRBQ1QayY994Cxeym9kSo3BXfDJ3wcnG1sdOvF
jsM0fsV75gMQNCy8VqiHTNhLk5DGM5PYKQLrQ8r0yoAwvXLLAbu+gPXJSWrACig=
=yWZX
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
The i.MX SoC changes for 4.8:
- A patch series including both cpuidle and FEC driver changes to
disable deeper idle states when FEC is active while board level
workaround for ERR006687 is not available
- A number patches to fix sparse warnings and spell errors
- A fix for TZIC FIQ translation from VIRQ to HWIRQ
- Support compatible of i.MX7 Solo SoC which has a subset of i.MX7 Dual
* tag 'imx-soc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: add support for i.MX 7Solo
ARM: i.MX: Disable supervisor protect for i.MX51
ARM: imx6: fix missing <soc/imx/cpuidle.h> in cpuidle-imx6q.c
ARM: i.MX: Fix FIQ interrupt handling for TZIC
ARM: imx6: fix static declaration in include/soc/imx/cpuidle.h
ARM: imx6q: export cpuidle functions needed by fec driver
ARM: imx: fix missing include of common.h
ARM: imx: fix missing includes
ARM: imx6: disable deeper idle states when FEC is active w/o HW workaround
ARM: mach-imx6q: fix spelling mistake in error message
Signed-off-by: Olof Johansson <olof@lixom.net>
Use regex pattern to match tango-specific files.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
cpu_die() and cpu_kill() are implemented in firmware.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Since the initial support of mach-uniphier, this has always been
just empty.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add MSM9615 support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=clyf
-----END PGP SIGNATURE-----
Merge tag 'qcom-soc-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc
Qualcomm ARM Based SoC Updates for v4.8
* Add MSM9615 support
* tag 'qcom-soc-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: qcom: Add support for MDM9615
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add final documentation for sama5d2
- Fix some compilation warnings
-----BEGIN PGP SIGNATURE-----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=dIzO
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.8-soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/soc
SoC changes for 4.8 #2:
- Add final documentation for sama5d2
- Fix some compilation warnings
* tag 'at91-ab-4.8-soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: at91: fix warnings in pm.c
ARM: at91: Documentation: update the sama5d2 entry
Signed-off-by: Olof Johansson <olof@lixom.net>
Looks like I only partially fixed up things if CONFIG_SMP
is not set for the recent kexec changes. We don't have
boot_secondary available without SMP as reported by Arnd.
Fixes: 0573b957fc ("ARM: OMAP4+: Prevent CPU1 related hang with kexec")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Most peripherals on the i.MX51 have an Off-Platform Peripheral Access
Control Register (OPACR) in which the access rights (together with the
MPROT registers) can be declared.
However, this does not seem to work for example for SSI1+SDMA, because the
supervisor bit is not set for the SDMA unit.
A similar problem was described in the patch for i.MX53 CPU
(ARM: i.MX53: globally disable supervisor protect), and the same solution
is applicable for i.MX51 CPU.
Patch has tested on custom board based on Digi CCMX-51 module (i.MX51).
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for Qualcomm MDM9615 in Kconfig and in DT match list.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The davinci-i2s driver ("davinci-mcbsp") does not use platform
data any longer. Remove the dummy pdata provided by the board
drivers dm355, dm365, dm644x and neuros-osd2.
Signed-off-by: Petr Kulhavy <petr@barix.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Some of the drivers for S3C and S5P families of Samsung SoCs go in
through Samsung SoC tree. Extend the entry so proper maintainers would
be displayed in such cases, most notably the cpufreq drivers. This does
not change the work-flow for other drivers which have sub-maintainers
(like Samsung clocks).
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
We need to reset CPU1 properly for kexec when booting different
kernel versions. Otherwise CPU1 will attempt to boot the the
previous kernel's start_secondary(). Note that the restctrl
register is different from the low-power mode wakeup register
CPU1_WAKEUP_NS_PA_ADDR. We need to configure both.
Let's fix the issue by defining SoC specific data to initialize
things in a more generic way. And let's also standardize omap-smp.c
to use soc_is instead of cpu_is while at it.
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Kexec booted kernels on omap4 will hang early during the boot if the
booted kernel is different version from the previous kernel.
This is because the previous kernel may have configured low-power mode
using CPU1_WAKEUP_NS_PA_ADDR. In that case it points to the previous
kernel's omap4_secondary_startup(), and CPU1 can be in low power mode
from the previous kernel. When the new kernel configures the CPU1
clockdomain, CPU1 can wake from low power state prematurely during
omap44xx_clockdomains_init() running random code.
Let's fix the issue by configuring CPU1_WAKEUP_NS_PA_ADDR before we
call omap44xx_clockdomains_init(). Note that this is very early during
the init, and we will do proper CPU1 reset during SMP init a bit later
on in omap4_smp_prepare_cpus(). And we need to do this when SMP is
not enabled as the previous kernel may have had it enabled.
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Prepare things for making kexec work on SMP omap variants by initializing
SARM RAM base early. This allows us to configure CPU1 for kexec in case
the previous kernel has put CPU1 in low power mode.
Note that this should not prevent moving other SAR RAM code to live
under drivers. However for kexec, we will need this very early.
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
As per the TRM: http://www.ti.com/lit/ug/spruh73m/spruh73m.pdf
offset 0x4 is reserved for PRM_PER. Hence removing the wrongly
defined address offset.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The declaration of s5p_init_cpu() in arch/arm/mach-exynos/common.h
is not included in the platform file arch/arm/plat-samsung/cpu.c
which generates a warning.
Fix the following warning by moving the declaration to somewhere
both the machine and platform code can get to it, and including
the right files as necessary:
arch/arm/plat-samsung/cpu.c:47:13: warning: symbol 's5p_init_cpu' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The ti81xx_rtc_hwmod is not exported, or declared outside the file
arch/arm/mach-omap2/omap_hwmod_81xx_data.c so make it static to
avoid the following warning:
arch/arm/mach-omap2/omap_hwmod_81xx_data.c:246:19: warning: symbol 'ti81xx_rtc_hwmod' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
pruss hwmod RSTST register wrongly points to PWRSTCTRL register in case of
am43xx. Fix the RSTST register offset value.
This can lead to setting of wrong power state values for PER domain.
Fixes: 1c7e224d ("ARM: OMAP2+: hwmod: AM335x: runtime register update")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The Exynos542x SoCs using A15+A7 can boot to A15 or A7. If it boots using
A7 (like on Odroid XU family boards), it can't choose right UART
physical address only the part number of CP15. Fix the detection logic
by checking the Cluster ID additionally.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
[k.kozlowski: Extend commit message]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The declaration of keystone_pm_runtime_init() is not included
from keystone.h in pm_domain.c. Including the file fixes the
following sparse warning:
arch/arm/mach-keystone/pm_domain.c:37:12: warning: symbol 'keystone_pm_runtime_init' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Fix a pair of missing statics on un-exported functions and
include <linux/platform_data/atmel.h> to provide the declaration
of at91_suspend_entering_slow_clock() to fix the following
sparse warnings:
arch/arm/mach-at91/pm.c:127:5: warning: symbol 'at91_suspend_entering_slow_clock' was not declared. Should it be static?
arch/arm/mach-at91/pm.c:358:6: warning: symbol 'at91rm9200_idle' was not declared. Should it be static?
arch/arm/mach-at91/pm.c:367:6: warning: symbol 'at91sam9_idle' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Update the Atmel SoC entry for SAMA5D2 with all the product variants. Add the
datasheet web link, now that it's available, for instant access to full product
documentation.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The <soc/imx/cpuidle.h> file has declarations of two funcitons
exported from cpuidle-imx6q.c but it is not included. Fix the
following warnings by adding the include:
arch/arm/mach-imx/cpuidle-imx6q.c:71:6: warning: symbol 'imx6q_cpuidle_fec_irqs_used' was not declared. Should it be static?
arch/arm/mach-imx/cpuidle-imx6q.c:76:6: warning: symbol 'imx6q_cpuidle_fec_irqs_unused' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix the PMU code endian access code to deal with kernels built for
big endian operation by changing the __raw IO accessors to the
_relaxed variants.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fix the use of __raw accesors in pm-common.c to use the _relaxed
variants to deal with any issues due to endian related fetches.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fix the PMU code endian access code to deal with kernels built for big endian
operation.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
If the kernel is built big endian, then using the __raw read and write IO
accessors is not going to work as they end up writing big-endian data to
little-endian IO registers. Fix this by using the readl and writel relaxed
versions which ensure little endian IO.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
If the system is built for big endian, then the CPU identificaiton register
will be read in the wrong order. Fix this by using readl_relaxed() on the
register.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The exynos low-level debug macros need to be fixed if the system is being
built big endian. Add the necessary endian swaps for accessing the registers
to get output working again
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
IRQ number should be translated from VIRQ to HWIRQ for TZIC.
As a solution for this issue, move existing translation code
from AVIC to common place.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
If both CONFIG_CPU_IDLE or CONFIG_SOC_IMX6Q are not set
then the imx6q_cpuidle_fec_irqs_used() and other functions
should be marked static inline to avoid the following
warnings whilst building drivers/net/ethernet/freescale:
include/soc/imx/cpuidle.h:21:6: warning: symbol 'imx6q_cpuidle_fec_irqs_used' was not declared. Should it be static?
include/soc/imx/cpuidle.h:22:6: warning: symbol 'imx6q_cpuidle_fec_irqs_unused' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Chris prepares support for the BCM23550 by removing reset code in the
BCM21664 machine code since a proper drivers/power/reset driver is provided and
shared, he then adds a machine entry point for BCM23550 and updates the SMP
code to bring-up the secondary cores on BCM23550
- Ben fixes a warning in the Kona L2 SMC code by adding the missing include file
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zoLK
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.8/soc' of http://github.com/Broadcom/stblinux into next/soc
This pull request contains SoC changes for Broadcom ARM-based SoCs:
- Chris prepares support for the BCM23550 by removing reset code in the
BCM21664 machine code since a proper drivers/power/reset driver is provided and
shared, he then adds a machine entry point for BCM23550 and updates the SMP
code to bring-up the secondary cores on BCM23550
- Ben fixes a warning in the Kona L2 SMC code by adding the missing include file
* tag 'arm-soc/for-4.8/soc' of http://github.com/Broadcom/stblinux:
ARM: bcm: fix missing include of kona_l2_cache.h
ARM: BCM23550 SMP support
ARM: Add support for Broadcom BCM23550 SoC
ARM: bcm21664: Remove reset code
Signed-off-by: Olof Johansson <olof@lixom.net>
- Solve an issue with DEBUG_LL and multi_v7
- Also make DEBUG_LL more user friendly
-----BEGIN PGP SIGNATURE-----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=uP+5
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.8-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/soc
SoC changes for 4.8:
- Solve an issue with DEBUG_LL and multi_v7
- Also make DEBUG_LL more user friendly
* tag 'at91-ab-4.8-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: at91: debug: add default DEBUG_LL addresses
ARM: at91: debug: use DEBUG_UART_VIRT
Signed-off-by: Olof Johansson <olof@lixom.net>
* Use ICRAM1 for jump stub on R-Car Gen 2 SoCs
* Postpone call to pm_genpd_init
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DKN7
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Renesas ARM Based SoC Updates for v4.8
* Use ICRAM1 for jump stub on R-Car Gen 2 SoCs
* Postpone call to pm_genpd_init
* tag 'renesas-soc-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: rcar-gen2: Use ICRAM1 for jump stub on all SoCs
ARM: shmobile: pm-rmobile: Postpone call to pm_genpd_init()
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull thermal management fixes from Zhang Rui:
- fix an ordering issue in cpu cooling that cooling device is
registered before it's ready (freq_table being populated).
(Lukasz Luba)
- fix a missing comment update (Caesar Wang)
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: add the note for set_trip_temp
thermal: cpu_cooling: fix improper order during initialization
