[Why]
We don't want GSL to be enabled when only updating
plane address
[How]
Only check other pipes for immediate flip if GSL is
already enabled
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
On DCE, the cursor is not being disabled on commits where there is no
CRTC or FB enabled.
[how]
Explicitly disable the cursor in the commit tail only if the pending
commit disables the CRTC.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Program modulo with ref dpp clk Mhz/10.
Program phase with pipe dpp clk Mhz /10.
DMUB FW could use these value to determine optimization clk
for PSR power saving.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When mpo enabled, video comes is 709. Desktop use sRGB.
So color change easily noticeable especially when switch between
mpo/non-mpo.
[How]
Force use sRGB for video TF is sRGB or BT709.
DCN1/DCN2 use predefined type with YUV.
DCN3 use distributed points type with YUV.
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to make sure all immediate flips are completed before locking
the pipes, but not pipes that are not flip immediate as they will be
locked by the OTG
[How]
Skip non flip immediate pipes when checking for flip pending.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The intended use is to force PSR into active state and ignore all
events until explicit EXIT.
A new event force_static is added to power module. It is then sent
to FW.
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Due to the freesync power optimization increasing vtotal, the driver
believes that MPO is supported. MPO is turned on. Freesync then
exits, MPO can no longer be supported and immediate flip fails. This
causes corruption on the panel.
[How]
Avoid the freesync optimization when doing validation so in the case
freesync exits, driver can still support the configuration.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In some cases, prefetch mode 0 is unsupported but prefetch 1 is
supported. Due to previous change always forcing prefetch mode to 0, we
are failing bandwidth validation in cases where we should not.
[How]
By default try prefetch mode 0 but in the case validation fails, attempt
to do prefetch mode 1 to see if it is supported.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently we are using dcn3 reg headers for dcn302. The offsets are
different between the two so they need seperate headers.
Add dcn302 header files and use these instead of dcn3 header
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl+oiOgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGKBQIAJw6oad/FA7j9OO2
dMoaXb8UaBehGWgW2rdfWrFPV5v0DBnp/GkdRpLoZIjV3W4mBfnog7bIa4Eswlxo
Y8sZxo5/3JlgJQUkHvzR1TYk5z61lHkUw9Kj/cCyx6YdbjSl19AfFsnhQVVMuyp9
TXL2c7hxkHlw8eBGrymVu0Ip7Zq0x8O2g+8nQpmRcvaR6SBuSHdikDF/iWCtU1YW
wpk5eWEVaAO67keZOz6b+aCFHqjFX+1dUBBuPnslucYLR73Qi16hfaU9pebe97Gb
lX/MJ1bR9BeRp314cF0PYbm4WhKjRLudHOFJH8x3dj/BiYNrFK3SJGLiiTwsrAZ8
kytU0Xs=
=Ke/D
-----END PGP SIGNATURE-----
Merge v5.10-rc3 into drm-next
We need commit f8f6ae5d07 ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") to be able to merge Jason's cleanup patch.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
amd-drm-next-5.11-2020-11-05:
amdgpu:
- Add initial support for Vangogh
- Add support for Green Sardine
- Add initial support for Dimgrey Cavefish
- Scatter/Gather display support for Renoir
- Updates for Sienna Cichlid
- Updates for Navy Flounder
- SMU7 power improvements
- Modifier support for gfx9+
- CI BACO fixes
- Arcturus SMU fixes
- Lots of code cleanups
- DC fixes
- Kernel doc fixes
- Add more GPU HW client information to page fault error logging
- MPO clock tuning for RV
- FP fixes for DCN3 on ARM and PPC
radeon:
- Expose voltage via hwmon on Sumo APUs
amdkfd:
- Fix unique id handling
- Misc fixes
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105222749.201798-1-alexander.deucher@amd.com
fonts:
- constify font structures.
MAINTAINERS:
- Fix path for amdgpu power management
amdgpu:
- Add support for more navi1x SKUs
- Fix for suspend on CI dGPUs
- VCN DPG fix for Picasso
- Sienna Cichlid fixes
- Polaris DPM fix
- Add support for Green Sardine
amdkfd:
- Fix an allocation failure check
i915:
- Fix set domain's cache coherency
- Fixes around breadcrumbs
- Fix encoder lookup during PSR atomic
- Hold onto an explicit ref to i915_vma_work.pinned
- gvt: HWSP reset handling fix
- gvt: flush workaround
- gvt: vGPU context pin/unpin
- gvt: mmio cmd access fix for bxt/apl
imx:
- drop unused functions and callbacks
- reuse imx_drm_encoder_parse_of
- spinlock rework
- memory leak fix
- minor cleanups
vc4:
- resource cleanup fix
panfrost:
- madvise/shrinker fix
-----BEGIN PGP SIGNATURE-----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=6eUB
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2020-11-06-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"It's Friday here so that means another installment of drm fixes to
distract you from the counting process.
Changes all over the place, the amdgpu changes contain support for a
new GPU that is close to current one already in the tree (Green
Sardine) so it shouldn't have much side effects.
Otherwise imx has a few cleanup patches and fixes, amdgpu and i915
have around the usual smattering of fixes, fonts got constified, and
vc4/panfrost has some minor fixes. All in all a fairly regular rc3.
We have an outstanding nouveau regression, but the author is looking
into the fix, so should be here next week.
I now return you to counting.
fonts:
- constify font structures.
MAINTAINERS:
- Fix path for amdgpu power management
amdgpu:
- Add support for more navi1x SKUs
- Fix for suspend on CI dGPUs
- VCN DPG fix for Picasso
- Sienna Cichlid fixes
- Polaris DPM fix
- Add support for Green Sardine
amdkfd:
- Fix an allocation failure check
i915:
- Fix set domain's cache coherency
- Fixes around breadcrumbs
- Fix encoder lookup during PSR atomic
- Hold onto an explicit ref to i915_vma_work.pinned
- gvt: HWSP reset handling fix
- gvt: flush workaround
- gvt: vGPU context pin/unpin
- gvt: mmio cmd access fix for bxt/apl
imx:
- drop unused functions and callbacks
- reuse imx_drm_encoder_parse_of
- spinlock rework
- memory leak fix
- minor cleanups
vc4:
- resource cleanup fix
panfrost:
- madvise/shrinker fix"
* tag 'drm-fixes-2020-11-06-1' of git://anongit.freedesktop.org/drm/drm: (55 commits)
drm/amdgpu/display: remove DRM_AMD_DC_GREEN_SARDINE
drm/amd/display: Add green_sardine support to DM
drm/amd/display: Add green_sardine support to DC
drm/amdgpu: enable vcn support for green_sardine (v2)
drm/amdgpu: enable green_sardine_asd.bin loading (v2)
drm/amdgpu/sdma: add sdma engine support for green_sardine (v2)
drm/amdgpu: add gfx support for green_sardine (v2)
drm/amdgpu: add soc15 common ip block support for green_sardine (v3)
drm/amdgpu: add green_sardine support for gpu_info and ip block setting (v2)
drm/amdgpu: add Green_Sardine APU flag
drm/amdgpu: resolved ASD loading issue on sienna
amdkfd: Check kvmalloc return before memcpy
drm/amdgpu: update golden setting for sienna_cichlid
amd/amdgpu: Disable VCN DPG mode for Picasso
drm/amdgpu/swsmu: remove duplicate call to smu_set_default_dpm_table
drm/i915: Hold onto an explicit ref to i915_vma_work.pinned
drm/i915/gt: Flush xcs before tgl breadcrumbs
drm/i915/gt: Expose more parameters for emitting writes into the ring
drm/i915: Fix encoder lookup during PSR atomic check
drm/i915/gt: Use the local HWSP offset during submission
...
Add proper FP_START/END handling and adjust Makefiles per
previous asics.
v2: fix up harder.
v3: fix clkmgr Makefile for dcn30
v4: fix old gcc handling is only required for x86
Build-tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com> (v1)
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoids confusion in configurations.
v2: fix build when CONFIG_DRM_AMD_DC_DCN is disabled
v3: rebase on latest code
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The change for correct asic type check
caused a psr regression due to incorrect
chip family id for Raven.
[How]
Use correct family id.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need for a separate config option at this point.
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display Manager support for green_sardine
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display Core support for green_sardine
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
number of warnings from the once-noisy docs build process is nearly zero.
Getting to this point has required a lot of work; once there, hopefully we
can keep things that way.
I have packaged this as a separate pull because it does a fair amount of
reaching outside of Documentation/. The changes are all in comments and in
code placement. It's all been in linux-next since last week.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl+hscQPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YgZAH/0JeDA/1VLZYYTmdABz8mjBZsoW9tyPGGztF
nsh5ykdHhL3MeTRwumW5armLVrfKhd1XT+nIzD7OcWlqu+RDOvQ5I95rahr473hP
1SHTjqm3/AlJwQoeS72X5U6QEJQ58e2IwCbP23H3x7I3Q3snEA/HhswzxurfoB/Z
j81YzDV2YPEc0LJWZ5Vn0NEdwP8cdpFv5rojsQmepq7K0yJ7tEHb7/u2cEuUBgXS
8LcYCNPLpiN+q5N8uQ5oDjIUNdLQvP03kgKtQWiCTr4BRydOrDlJie28LIedamEz
anu7UfaVK4bxn+ugRI0g2+aWQKux81ULCinKUWmLRNbcxjhaQqQ=
=hDfp
-----END PGP SIGNATURE-----
Merge tag 'docs-5.10-warnings' of git://git.lwn.net/linux
Pull documentation build warning fixes from Jonathan Corbet:
"This contains a series of warning fixes from Mauro; once applied, the
number of warnings from the once-noisy docs build process is nearly
zero.
Getting to this point has required a lot of work; once there,
hopefully we can keep things that way.
I have packaged this as a separate pull because it does a fair amount
of reaching outside of Documentation/. The changes are all in comments
and in code placement. It's all been in linux-next since last week"
* tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits)
docs: SafeSetID: fix a warning
amdgpu: fix a few kernel-doc markup issues
selftests: kselftest_harness.h: fix kernel-doc markups
drm: amdgpu_dm: fix a typo
gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups
drm: amdgpu: kernel-doc: update some adev parameters
docs: fs: api-summary.rst: get rid of kernel-doc include
IB/srpt: docs: add a description for cq_size member
locking/refcount: move kernel-doc markups to the proper place
docs: lockdep-design: fix some warning issues
MAINTAINERS: fix broken doc refs due to yaml conversion
ice: docs fix a devlink info that broke a table
crypto: sun8x-ce*: update entries to its documentation
net: phy: remove kernel-doc duplication
mm: pagemap.h: fix two kernel-doc markups
blk-mq: docs: add kernel-doc description for a new struct member
docs: userspace-api: add iommu.rst to the index file
docs: hwmon: mp2975.rst: address some html build warnings
docs: net: statistics.rst: remove a duplicated kernel-doc
docs: kasan.rst: add two missing blank lines
...
Properly protect the relevant code with CONFIG_DRM_AMD_DC_DCN.
Fixes: 0b08c54bb7 ("drm/amd/display: Fix the display corruption issue on Navi10")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix typoes.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Will expand it to other ASICs after verified.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-and-tested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Incorrect values were resulting in flash lines
when MPO was enabled and system was left idle.
[How]
Increase min clk values only when MPO is enabled
and display is active to not affect S3 power.
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Recout calculation does not corrrectly handle plane
clip rect that extends beyond the left most border
of stream source rect. This change adds handling by
truncating the invisible clip rect.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Add command for retrieving PSR residency
- Add command for forcing PSR static
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we have more than 4 displays we will run
into dummy irq calls or flip timout issues.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Fail and restart timing for HDCP1 retry occurs too quickly.
This would cause some MST monitors to show black screen.
[How]
Adjusted timing of fail and restart to 200ms.
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Commit "Blank HUBP during pixel data blank for DCN30 v2"
modifies HW behaviour during blank, which might have OS
dependencies. We need to assess the impact on amdgpu_dm
and only re-enable HUBP blanking when all necessary
changes are understood.
[How]
- revert functional changes
- leave architectural changes intact
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Customer make a request to add this WA by driver.
Some MUX chips will power down with eDP 1.4 panel and
lose previous supported link rates(DPCD 0x010) in
customer's hybrid-GPU designs. As a result, during sleep
resuming and screen turns on from idle, link training
will be performed incorrectly and eDP will flicker or
black screen. These MUX chips need source to read DPCD
0x010 again during LKT so that it can restore supported
link rates of panel.
For driver side, supported link rate set is fetched when
link detection, no need to update but just read again
as WA.
[How]
Read DPCD 0x010 again during link training for eDP 1.4.
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Currently, we only support calculating CRC on whole frame.
We want to extend the capability to calculate CRC on
specific frame area.
[how]
Calculate CRC on specific area once it's specified from the
input parameter.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is a DRM_ERROR when the dc_sink is NULL and
there should not be this warning when the connector
is forced.
[how]
Do not warn if dc_sink is NULL if the connector
is forced.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Prior commit "Blank HUBP during pixel data blank for DCN30"
missed the call to set_disp_pattern_generator from
set_crtc_test_pattern, which re-exposed the issue for which
we initially blocked active-only p-state switching.
[How]
- remove dcn30_blank_pixel_data, set dcn30 back to dcn20 version
- new hwss funciton set_disp_pattern_generator
- dcn20 version just calls opp_set_disp_pattern_generator
- dcn30 version implements the HUBP blank
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When checking if we want to disable GSL or not,
we should reset flip_immediate to be the flip type
of the topmost plane before looping through the
other planes.
[How]
Set flip_immediate to be the flip type of the topmost
plane before looping through the other planes.
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to trigger atomic check on connector when
DSC debugfs properties are changed. The previous
method was reverted because it accessed connector
properties unsafely and would also heavily
impact performance.
[How]
Add a flag for forcing DSC update in CRTC state
and add connector to the state if the flag is set.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The current end of T9 delay is relay on polling
sink status by DPCD. But the polling for sink
status change after NoVideoStream_flag set to 0.
[How]
Add function edp_add_delay_for_T9 to add T9 delay.
Move the sink status polling after blank.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The OPTC memory blocks should be powered down when they are not in use.
This will reduce power consumption.
[How]
1. Set ODM_MEM_UNASSIGNED_PWR_MODE to shutdown memory when unassigned
2. Set ODM_MEM_VBLANK_PWR_MODE to light sleep mode when in vblank
3. Added a debug option to allow this behaviour to be turned off
4. Restructured debug options to use a bitfield in a way that's more clear
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Incorrect panel register settings are
applied for power sequence because the
register macro is not defined in resource.
[How]
Implement same register space to future
resource files.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
If pbn_per_slot is 0, fail instead of dividing by zero and
bugchecking.
[how]
Check for zero divisor before division operation.
Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are some timings for which we support p-state
switching in active, but not in blank. There was a
previous issue where a timing that had active-only
support would hang a p-state request when we were in
an extended blanking period. The workaround for that
issue was to block active-only p-state switching,
but that resulted in a lack of p-state support for
some common timings such as 1440p60. We want to fix
that issue properly by un-blocking p-state requests
while the display is blanked, so that we can re-enable
active-only p-state switching.
[How]
- new version of blank_pixel_data for DCN30
- call hubp->set_blank from dcn30_blank_pixel_data
- blank every hubp in the mpcc tree, and odm tree
- on blank enable, wait until the next frame before blanking HUBP
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver keeps the invalid information cause report the
incorrect monitor which save in remote sink to OS
[How]
When connector type change from MST to non-MST,
stop the topology manager.
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When enabling PIP in Heaven, the PIP planes are VSYNC
flip and is also the top-most pipe. In this case GSL
will be disabled because we only check immediate flip
for the top pipe. However, the desktop planes are still
flip immediate so we should at least keep GSL on until
the full update.
[How]
Check each pipe in the tree to see if any planes
are flip immediate. Maintain the GSL lock if yes,
and take it down after when unlocking if any planes
are flipping VSYNC. Keeping GSL on with VSYNC +
flip immediate planes causes corruption.
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On APU should be always using prefetch mode 0.
Currently, sometimes prefetch mode 1 is being
used causing system to hard hang due to
minTTUVBlank being too low.
[How]
Any ASIC running DCN21 will by default allow
self refresh and mclk switch. This sets both
min and max prefetch mode to 0 by default.
Signed-off-by: Isabel Zhang <isabel.zhang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
1. only need to check first ODM pipe.
2. Only need to check eDP which is on.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The MPC memory blocks in DCN3 should be powered down completely when
they are not in use. This will reduce power consumption.
[How]
This commits changes behaviour for dcn3 and does the following:
1. Write to MPC_RMU<X>_LOW_PWR_MODE and MPCC_OGAM_MEM_LOW_PWR_MODE to
automatically shut down memory when not in use
2. mpc3_power_on_shaper_3dlut and mpc3_power_on_ogam_lut are called
to disable force power on when configuration finishes
3. Added a debug option to allow this behaviour to be turned off
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The C standard does not specify whether an enum is signed or unsigned.
In the function prototype, one of the argument is defined as an enum
but its declaration was unit32_t. Fix this by changing the function
argument to enum in the declaration.
Signed-off-by: Tao.Huang <Tao.Huang@amd.com>
Signed-off-by: Florin Iucha <florin.iucha@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gcc -Wextra warns about a function taking an enum argument
being called with a bool:
drivers/gpu/drm/amd/amdgpu/../display/modules/color/color_gamma.c: In function 'apply_degamma_for_user_regamma':
drivers/gpu/drm/amd/amdgpu/../display/modules/color/color_gamma.c:1617:29: warning: implicit conversion from 'enum <anonymous>' to 'enum dc_transfer_func_predefined' [-Wenum-conversion]
1617 | build_coefficients(&coeff, true);
It appears that a patch was added using the old calling conventions
after the type was changed, and the value should actually be 0
(TRANSFER_FUNCTION_SRGB) here instead of 1 (true).
Fixes: 55a01d4023 ("drm/amd/display: Add user_regamma to color module")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We're unconditionally using modifiers internally for GFX9+ now.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This expose modifier support on GFX9+.
Only modifiers that can be rendered on the current GPU are
added. This is to reduce the number of modifiers exposed.
The HW could expose more, but the best mechanism to decide
what to expose without an explosion in modifiers is still
to be decided, and in the meantime this should not regress
things from pre-modifiers and does not risk regressions as
we make up our mind in the future.
v2:
- Added comment that D on Raven is only valid for 64bpp
and will be filtered based on format later.
- Removed D tiling modes that weren't useful for 64bpp
on GFX10+.
v4: Add AMDGPU_FAMILY_VGH case.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For DCC we will use 2/3 planes to avoid X rendering to the frontbuffer
with DCC compressed images. To make this work with the core KMS
validation we need to add extra formats with the extra planes.
However, due to flexibility we set bpp = 0 for the extra planes and
do the validation ourselves.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This sets the DC tiling options from the modifier, if modifiers
are used for the FB. This patch by itself does not expose the
support yet though.
There is not much validation yet to limit the scope of this
patch, but the current validation is at the same level as
the BO metadata path.
v2: Add modifier check to should_reset_plane.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prepare for inserting modifiers based configuration, while sharing
a bunch of DCC validation & initializing the device-based configuration.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This moves the tiling_flags to the framebuffer creation.
This way the time of the "tiling" decision is the same as it
would be with modifiers.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With modifiers I'd like to support non-dedicated buffers for
images.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: stable@vger.kernel.org # 5.1.0
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Silently accepting it could result in corruption.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct spelling in one of the comment.
s/defalut/default/p
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
core_link_write_dpcd() returns enum dc_status, not ddc_result:
display/dc/core/dc_link_dp.c: In function 'dp_set_panel_mode':
display/dc/core/dc_link_dp.c:4237:11: warning: implicit conversion from 'enum dc_status' to 'enum ddc_result'
[-Wenum-conversion]
Avoid the warning by using the correct enum in the caller.
Fixes: 0b22632243 ("drm/amd/display: Synchronous DisplayPort Link Training")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccinelle report:
./drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c:1367:3-5:
WARNING: possible condition with no effect (if == else)
Both branches are the same, so remove the if/else altogether.
Fixes: 81875979f0 ("drm/amd/display: Remove extra pairs of parentheses in dce_calcs.c")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's unused and identical to dal_cmd_tbl_helper_dce112_get_table2.
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need for a separate config option at this point.
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need this to pass dp compliance.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nikola Cornij <nikola.cornij@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes this warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_ddc.c: In function ‘defer_delay_converter_wa’:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_ddc.c:285:2: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
285 | if (link->dpcd_caps.branch_dev_id == DP_BRANCH_DEVICE_ID_0080E1 &&
| ^~
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_ddc.c:291:3: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
291 | if (link->dpcd_caps.branch_dev_id == DP_BRANCH_DEVICE_ID_006037 &&
| ^~
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is required for MALL. Was accidently removed in PSR update.
Fixes: 48e48e5984 ("drm/amd/display: Disable idle optimization when PSR is enabled")
Fixes: 52f2e83e2f ("drm/amdgpu/display: add MALL support (v2)")
Acked-by: Slava Abramov <slava.abramov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check chip family also to avoid wrong identification.
V2: use the correct macro without AMDGPU prefix
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable watermark table setting for Polaris.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch simplifies the ASSERT*() and BREAK_TO_DEBUGGER() macros:
- Move the dependency check of CONFIG_KGDB into Kconfig
- Unify the kgdb_breakpoint() call
- Drop the non-existing CONFIG_HAVE_KGDB
Also align the behavior of ASSERT() macro in both cases with and
without CONFIG_DEBUG_KERNEL_DC.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ASSERT_CRITICAL() invokes kgdb_breakpoint() whenever either
CONFIG_KGDB or CONFIG_HAVE_KGDB is set. This, however, may lead to a
kernel panic when no kdb stuff is attached, since the
kgdb_breakpoint() call issues INT3. It's nothing but a surprise for
normal end-users.
For avoiding the pitfall, make the kgdb_breakpoint() call only when
CONFIG_DEBUG_KERNEL_DC is set.
https://bugzilla.opensuse.org/show_bug.cgi?id=1177973
Cc: <stable@vger.kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently both error code paths handled in dal_gpio_open_ex() issues
ASSERT_CRITICAL(), and this leads to a kernel panic unnecessarily if
CONFIG_KGDB is enabled. Since basically both are non-critical errors
and can be recovered, drop those assert calls and use a safer one,
BREAK_TO_DEBUGGER(), for allowing the debugging, instead.
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1177973
Cc: <stable@vger.kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It looks this was accidently lost in a follow up patch.
dc context is large and we don't need contiguous pages.
Fixes: e4863f118a ("drm/amd/display: Multi display cause system lag on mode change")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Alex Xu <alex_y_xu@yahoo.ca>
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Cc: stable@vger.kernel.org
why:
oem-related ddc read/write fails without these regs
how:
copy from hw_factory_dcn20.c
Signed-off-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
get_pixel_clk_frequency_100hz is undefined in clock_source_funcs.
[how]
set function pointer: ".get_pixel_clk_frequency_100hz = get_pixel_clk_frequency_100hz"
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch simplifies the ASSERT*() and BREAK_TO_DEBUGGER() macros:
- Move the dependency check of CONFIG_KGDB into Kconfig
- Unify the kgdb_breakpoint() call
- Drop the non-existing CONFIG_HAVE_KGDB
Also align the behavior of ASSERT() macro in both cases with and
without CONFIG_DEBUG_KERNEL_DC.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ASSERT_CRITICAL() invokes kgdb_breakpoint() whenever either
CONFIG_KGDB or CONFIG_HAVE_KGDB is set. This, however, may lead to a
kernel panic when no kdb stuff is attached, since the
kgdb_breakpoint() call issues INT3. It's nothing but a surprise for
normal end-users.
For avoiding the pitfall, make the kgdb_breakpoint() call only when
CONFIG_DEBUG_KERNEL_DC is set.
https://bugzilla.opensuse.org/show_bug.cgi?id=1177973
Cc: <stable@vger.kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently both error code paths handled in dal_gpio_open_ex() issues
ASSERT_CRITICAL(), and this leads to a kernel panic unnecessarily if
CONFIG_KGDB is enabled. Since basically both are non-critical errors
and can be recovered, drop those assert calls and use a safer one,
BREAK_TO_DEBUGGER(), for allowing the debugging, instead.
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1177973
Cc: <stable@vger.kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It looks this was accidently lost in a follow up patch.
dc context is large and we don't need contiguous pages.
Fixes: e4863f118a ("drm/amd/display: Multi display cause system lag on mode change")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Aric Cyr <aric.cyr@amd.com>
Cc: Alex Xu <alex_y_xu@yahoo.ca>
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
[Why]
For user regamma we're missing this function call
to combine user regamma + OS for GAMMA_CS_TFM_1D type.
[How]
Applied 1D LUT in the mod_color_build_user_regamma.
And Set the regamma dirty as updateGamma.
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some platform has a limitation of 2ms for udelay
[how]
Add 1ms udelay for specific dongle.
Signed-off-by: jinlong zhang <jinlong.zhang@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The clock state update is the source of many problems, and capturing
this sort of information helps debug. This commit introduces tracepoints
for capturing clock values and also add traces in DCE, DCN1, DCN2x, and
DCN3.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces a trace mechanism for struct pipe_ctx by adding a
middle layer struct in the amdgpu_dm_trace.h for capturing the most
important data from struct pipe_ctx and showing its data via tracepoint.
This tracepoint was added to dc.c and dcn10_hw_sequencer, however, it
can be added to other DCN architecture.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Debug amdgpu_dm could be a complicated task, therefore, this commit adds
tracepoints in some convenient functions such as plane and connector
check inside amdgpu_dm.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_dc_rreg and amdgpu_dc_wreg are very similar, for this reason,
this commits abstract these two events by using DECLARE_EVENT_CLASS and
create an instance of it for each one of these events.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Our DC currently uses some of the tracepoint function inside a DC
header, which means that many other files implicitly include part of the
trace function. This situation limits how we can expand this feature for
other parts of the driver by generating multiple compilation errors when
we try to reuse some of the existing structures. This commit decouples
part of the amdgpu_dm_trace from DC core to simplify the trace
enlargement in future changes.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| [Header Changes]
| - Add new SCRATCH15 boot option and fw_state member to skip
| phy access
| - Add new SCRATCH15 boot option and fw_state member to disable
| clk gating
| - Add defines for AUX return status
| - Add defines for HPD events
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
oem-related ddc read/write fails without these regs
how:
copy from hw_factory_dcn20.c
Signed-off-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It was detected in some Freesync HDR tests that displays were not
reaching their maximum nominal brightness.
[HOW]
The Multi-plane combiner (MPC) Output Gamma (OGAM) block builds a
discrete Lookup Table (LUT). When the display's maximum brightness
falls in between two values, having to be linearly interpolated by
the hardware, rounding issues might occur that will cause the
display to never reach its maximum brightness.
The fix involves doing the calculations backwards, ensuring that
the interpolation in the maximum brightness values translates to an
output of 1.0.
Signed-off-by: Felipe Clark <felclark@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When ODM combine is in use we trigger multiple update events causing
issues with variable refresh rate.
[How]
Only trigger on a single ODM instance.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We should leave GSL if we're not doing immediate flip no matter if
we're doing pipe split or not
[How]
Check for updating GSL state whenever we're not doing
immediate flip
v2: Squash in build fix (Alex)
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
VBIOS will not enable VSC_SDP during pre-OS to lead
MISC1[6] wasn't matched with driver.
[HOW]
disabled seamless boot if sink supports VSC_SDP
Signed-off-by: Yu-Ting Shen <Yu-ting.Shen@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
right side visual confirm is too thick due to it is 4 times of
left side (16 lines).
[How]
Change factor from 4 to 2.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some monitors,
they can't display under BIOS with avmute enabled.
[How]
Add monitor patch for skip avmute action.
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
All DCN3x resources share ABM_MASK_SH_LIST_DCN301 definition.
The naming is misleading since it looks like DCN30 code
depends on next version DCN301, which in fact is vice-versa.
[How]
Refactor the naming to ABM_MASK_SH_LIST_DCN30.
v2: squash in build fixes (Alex)
Signed-off-by: Roman Li <roman.li@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
missing OEM data to control graphics card functions
how:
load it into init_data. copied over from dcn2 implementation.
copied destruction sequence as well.
Signed-off-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Currently disable 48mhz debug option only disables on boot.
Need to put option check in update_clocks as well to make it
affect more areas.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] Can be used for debug purposes
[How] Add max target bpp override field and related handling
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
So we can track VSC SDP errors from display
[how]
Define the bit, and use it in driver logic
Signed-off-by: Reza Amini <Reza.Amini@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Underflow counter increases in AGM when performing some mode switches due
to timing sync, which is a known hardware issue.
[How]
Temporarily raise DPG height during timing sync so that underflow is not
reported.
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If full pstate is not supported, we should set WM set A
to 0 to prevent any hangs
[How]
If pstate is not supported, set watermark set A to 0
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some sink devices wish to have access to the minimum
HBlank supported by the ASIC.
[How]
Make the ASIC minimum HBlank available in Source
Device information address 0x340.
Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Enable ODM Combine + Fullscreen MPO on DCN2.1
For lower power consumption in video use cases.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Sung Lee <sung.lee@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Create a separate dcn21_fast_validate_bw function for dcn21.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DF PState and Voltage State are coupled such that one cannot be
raised without raising the other. This uses more power than
is necessary in high bandwidth scenarios.
[HOW]
Add logic to create a new bounding box state that allows for
DF PState to be low while Voltage State is high. Watermarks
vlevel calculation logic was also udpated to assume
state 1 contains the new optimized state.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
get_pixel_clk_frequency_100hz is undefined in clock_source_funcs.
[how]
set function pointer: ".get_pixel_clk_frequency_100hz = get_pixel_clk_frequency_100hz"
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dm_comressor_info -> dm_compressor_info
The kernel-doc markup is right, but the struct itself
and their references contain a typo.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable Memory Access at Last Level (MALL) feature for display.
v2: squash in 64 bit division fixes
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A break is not needed if it is preceded by a return or break
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On connector destruction call drm_dp_mst_topology_mgr_destroy
to release resources allocated in drm_dp_mst_topology_mgr_init.
Do it only if MST manager was initilized before otherwsie a crash
is seen on driver unload/device unplug.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Screen corruption on Navi10 card
[How]
Set system context in DCN only on Renoir
Tested-by: Matt Coffin <mcoffin13@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As far a I can tell uses a variant of DCN3xx which uses num_pkrs.
If we do not initialize the variable we will set the register field
to ilog2(0) = -1, though the mask will reduce that to 7. Pretty sure
7 is not the value we want here.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-and-Tested-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some setups will fail to build. So copy dcn301 makefile setup
which is known to work
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On connector destruction call drm_dp_mst_topology_mgr_destroy
to release resources allocated in drm_dp_mst_topology_mgr_init.
Do it only if MST manager was initilized before otherwsie a crash
is seen on driver unload/device unplug.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As warned when running "make htmldocs":
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:345: warning: Function parameter or member 'force_timing_sync' not described in 'amdgpu_display_manager'
This new struct member was not documented at kernel-doc markup.
Fixes: 3d4e52d0cf ("drm/amd/display: Add debugfs for forcing stream timing sync")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was recently introduced a change that enables driver to disable
streams if pixel clock changes. Consequently, the code path executed in
the disable vbios function expanded to an encoder verification part.
The encoder loop is nested inside the pipe count loop, and both loops
share the 'i' variable in control of their flow. This situation may lead
to an infinite loop because the encoder loop constantly updates the `i`
variable, making the first loop always positive. As a result, we can see
a soft hang during the module load (modprobe amdgpu) and a series of
dmesg log that looks like this:
kernel:[ 124.538727] watchdog: BUG: soft lockup - CPU#2 stuck for 22s!
[modprobe:1000]
RSP: 0018:ffffabbf419bf0e8 EFLAGS: 00000282
RAX: ffffffffc0809de0 RBX: ffff93b35ccc0000 RCX: ffff93b366c21800
RDX: 0000000000000000 RSI: 0000000000000141 RDI: ffff93b35ccc0000
RBP: ffffabbf419bf108 R08: ffffabbf419bf164 R09: 0000000000000001
R10: 0000000000000003 R11: 0000000000000003 R12: 0000000008677d40
R13: 0000000000000141 R14: ffff93b35cfc0000 R15: ffff93b35abc0000
FS: 00007f1400717540(0000) GS:ffff93b37f680000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005649b66b0968 CR3: 00000003e0fec000 CR4: 0000000000350ee0
Call Trace:
amdgpu_device_rreg+0x17/0x20 [amdgpu]
amdgpu_cgs_read_register+0x14/0x20 [amdgpu]
dm_read_reg_func+0x3a/0xb0 [amdgpu]
get_pixel_clk_frequency_100hz+0x30/0x50 [amdgpu]
dc_commit_state+0x8f1/0xae0 [amdgpu]
? drm_calc_timestamping_constants+0x101/0x160 [drm]
amdgpu_dm_atomic_commit_tail+0x39d/0x21a0 [amdgpu]
? dcn21_validate_bandwidth+0xe5/0x290 [amdgpu]
? kfree+0xc3/0x390
? dcn21_validate_bandwidth+0xe5/0x290 [amdgpu]
...
RSP: 002b:00007fff26009bd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000055a8025bea50 RCX: 00007f140085c89d
RDX: 0000000000000000 RSI: 000055a8025b8290 RDI: 000000000000000c
RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000000c R11: 0000000000000246 R12: 000055a8025b8290
R13: 0000000000000000 R14: 000055a8025bead0 R15: 000055a8025bea50
This issue was fixed by introducing a second variable for the internal
loop.
Fixes: 8353d30e74 ("drm/amd/display: disable stream if pixel clock changed with link active")
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix this to avoid build problems if DRM_AMD_DC_DCN3_02 is defined, but
DRM_AMD_DC_DCN3_01 is not.
Fixes: 36d26912e8 ("drm/amd/display: Add support for DCN302 (v2)")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As warned when running "make htmldocs":
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:345: warning: Function parameter or member 'force_timing_sync' not described in 'amdgpu_display_manager'
This new struct member was not documented at kernel-doc markup.
Fixes: 3d4e52d0cf ("drm/amd/display: Add debugfs for forcing stream timing sync")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Functions (disable_all_writeback_pipes_for_stream &
dc_enable_stereo & dc_post_update_surfaces_to_stream)
always return true, there is no need to keep the return value.
This change is to make the code a bit more readable.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display Manager support for green_sardine
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display Core support for green_sardine
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was recently introduced a change that enables driver to disable
streams if pixel clock changes. Consequently, the code path executed in
the disable vbios function expanded to an encoder verification part.
The encoder loop is nested inside the pipe count loop, and both loops
share the 'i' variable in control of their flow. This situation may lead
to an infinite loop because the encoder loop constantly updates the `i`
variable, making the first loop always positive. As a result, we can see
a soft hang during the module load (modprobe amdgpu) and a series of
dmesg log that looks like this:
kernel:[ 124.538727] watchdog: BUG: soft lockup - CPU#2 stuck for 22s!
[modprobe:1000]
RSP: 0018:ffffabbf419bf0e8 EFLAGS: 00000282
RAX: ffffffffc0809de0 RBX: ffff93b35ccc0000 RCX: ffff93b366c21800
RDX: 0000000000000000 RSI: 0000000000000141 RDI: ffff93b35ccc0000
RBP: ffffabbf419bf108 R08: ffffabbf419bf164 R09: 0000000000000001
R10: 0000000000000003 R11: 0000000000000003 R12: 0000000008677d40
R13: 0000000000000141 R14: ffff93b35cfc0000 R15: ffff93b35abc0000
FS: 00007f1400717540(0000) GS:ffff93b37f680000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005649b66b0968 CR3: 00000003e0fec000 CR4: 0000000000350ee0
Call Trace:
amdgpu_device_rreg+0x17/0x20 [amdgpu]
amdgpu_cgs_read_register+0x14/0x20 [amdgpu]
dm_read_reg_func+0x3a/0xb0 [amdgpu]
get_pixel_clk_frequency_100hz+0x30/0x50 [amdgpu]
dc_commit_state+0x8f1/0xae0 [amdgpu]
? drm_calc_timestamping_constants+0x101/0x160 [drm]
amdgpu_dm_atomic_commit_tail+0x39d/0x21a0 [amdgpu]
? dcn21_validate_bandwidth+0xe5/0x290 [amdgpu]
? kfree+0xc3/0x390
? dcn21_validate_bandwidth+0xe5/0x290 [amdgpu]
...
RSP: 002b:00007fff26009bd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000055a8025bea50 RCX: 00007f140085c89d
RDX: 0000000000000000 RSI: 000055a8025b8290 RDI: 000000000000000c
RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000000c R11: 0000000000000246 R12: 000055a8025b8290
R13: 0000000000000000 R14: 000055a8025bead0 R15: 000055a8025bea50
This issue was fixed by introducing a second variable for the internal
loop.
Fixes: 8353d30e74 ("drm/amd/display: disable stream if pixel clock changed with link active")
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These function pointers are missing from dcn30_init
.calc_vupdate_position : Used to help avoid cursor stuttering
.set_pipe : Needed for setting ABM
So add them
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This should be programmed with timing rather than with odm.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We will hang if we report switch in VACTIVE but not in VBLANK and DPG_EN = 1
[How]
Block switch in ACTIVE if not supported in BLANK
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These were leftover from the initial implementation, but
never used. Drop them.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Noticed-by: Ryan Taylor <ryan.taylor@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
