Add new module driver for new ASRC in i.MX8MN, several commits
are added for new property fsl,asrc-format
Shengjiu Wang (7):
ASoC: fsl_asrc: rename asrc_priv to asrc
ASoC: dt-bindings: fsl_asrc: Add new property fsl,asrc-format
ASoC: fsl-asoc-card: Support new property fsl,asrc-format
ASoC: fsl_asrc: Support new property fsl,asrc-format
ASoC: fsl_asrc: Move common definition to fsl_asrc_common
ASoC: dt-bindings: fsl_easrc: Add document for EASRC
ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers
changes in v9
- use lowercase for dt example.
changes in v8
- change get_pair_priv_size to pair_priv_size variable
changes in v7
- updated according to Nicoin's comments.
- add get_pair_priv_size to replace PAIR_PRIVATE_SIZE
changes in v6
- updated according to Nicoin's and Rob's comments.
changes in v5
- Add new property fsl,asrc-format, rather than change fsl,asrc-width
to fsl,asrc-formt.
- code change for above change.
changes in v4
- Add several commit for changing DT binding asrc-width to asrc-format
- rename asrc_priv to asrc
changes in v3
- add new commit "ASoC: fsl_asrc: Change asrc_width to asrc_format"
- modify binding doc to yaml format
- remove fsl_easrc_dma.c, make fsl_asrc_dma.c useable for easrc.
changes in v2
- change i.MX815 to i.MX8MN
- Add changes in Kconfig and Makefile
.../devicetree/bindings/sound/fsl,asrc.txt | 4 +
.../devicetree/bindings/sound/fsl,easrc.yaml | 101 +
sound/soc/fsl/Kconfig | 11 +
sound/soc/fsl/Makefile | 2 +
sound/soc/fsl/fsl-asoc-card.c | 24 +-
sound/soc/fsl/fsl_asrc.c | 305 +--
sound/soc/fsl/fsl_asrc.h | 74 +-
sound/soc/fsl/fsl_asrc_common.h | 106 +
sound/soc/fsl/fsl_asrc_dma.c | 54 +-
sound/soc/fsl/fsl_easrc.c | 2114 +++++++++++++++++
sound/soc/fsl/fsl_easrc.h | 651 +++++
11 files changed, 3212 insertions(+), 234 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/fsl,easrc.yaml
create mode 100644 sound/soc/fsl/fsl_asrc_common.h
create mode 100644 sound/soc/fsl/fsl_easrc.c
create mode 100644 sound/soc/fsl/fsl_easrc.h
--
2.21.0
Hi Mark
Current snd_soc_component_driver has compr_ops,
but it is created for ALSA, not for ALSA SoC.
This means it doesn't know the callback is for which component,
thus, each callback needs to get component via lookup function.
It is not good design, and will not work in the future,
because ASoC can have multipul same name component which
current lookup function can't handle.
This v2 patch-set adds new snd_compress_ops and call
callbacks with component.
v1 is here
Link: https://lore.kernel.org/alsa-devel/87blnqpuqp.wl-kuninori.morimoto.gx@renesas.com/
Kuninori Morimoto (8):
ASoC: soc-compress: add snd_compress_ops
ASoC: codec: wm_adsp: use snd_compress_ops
ASoC: uniphier: use snd_compress_ops
ASoC: qcom: q6sp6: use snd_compress_ops
ASoC: intel: atom: use snd_compress_ops
ASoC: sof: use snd_compress_ops
ASoC: sprd: use snd_compress_ops
ASoC: soc-compress: remove snd_compr_ops
include/sound/soc-component.h | 40 ++++++++-
sound/soc/codecs/cs47l15.c | 9 +-
sound/soc/codecs/cs47l24.c | 8 +-
sound/soc/codecs/cs47l35.c | 9 +-
sound/soc/codecs/cs47l85.c | 9 +-
sound/soc/codecs/cs47l90.c | 9 +-
sound/soc/codecs/cs47l92.c | 9 +-
sound/soc/codecs/wm5102.c | 9 +-
sound/soc/codecs/wm5110.c | 8 +-
sound/soc/codecs/wm_adsp.c | 18 ++--
sound/soc/codecs/wm_adsp.h | 18 ++--
.../intel/atom/sst-mfld-platform-compress.c | 43 +++++----
sound/soc/intel/atom/sst-mfld-platform-pcm.c | 2 +-
sound/soc/intel/atom/sst-mfld-platform.h | 2 +-
sound/soc/qcom/qdsp6/q6asm-dai.c | 51 ++++++-----
sound/soc/soc-compress.c | 89 ++++++++++---------
sound/soc/sof/compress.c | 7 +-
sound/soc/sof/compress.h | 7 +-
sound/soc/sof/pcm.c | 4 +-
sound/soc/sof/sof-priv.h | 2 +-
sound/soc/sprd/sprd-pcm-compress.c | 49 +++++-----
sound/soc/sprd/sprd-pcm-dma.c | 2 +-
sound/soc/sprd/sprd-pcm-dma.h | 2 +-
sound/soc/uniphier/aio-compress.c | 45 ++++++----
sound/soc/uniphier/aio-dma.c | 2 +-
sound/soc/uniphier/aio.h | 2 +-
26 files changed, 265 insertions(+), 190 deletions(-)
--
2.17.1
The ZL38060 is a "Connected Home Audio Processor" from Microsemi,
which consists of a Digital Signal Processor (DSP), several Digital
Audio Interfaces (DAIs), analog outputs, and a block of 14 GPIOs.
This driver supports only a tiny subset of the chip's functionality
and possible configurations:
- bypass mode (whole dsp block is bypassed)
- chip's I2S DAI routed directly to/from DACs and microphone
- chip's internal clock is driven by a 12 MHz external crystal
- chip's DAI connected to CPU is I2S, and bit + frame clock master
- chip must be strapped for "host boot": in this mode, firmware will
be provided by this driver.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Link: https://lore.kernel.org/r/20200417221341.31428-2-TheSven73@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_compr_ops couldn't care called component,
but now we can care it via snd_compress_ops.
All drivers switched to it.
This patch removes snd_compr_ops.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87lfmqvdig.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87mu76vdiv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_compress_ops.
Let's switch to use it.
Upstream code doesn't have sof_compressed_ops.
This patch assume it is implemented at out-of-tree.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87o8rmvdj7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
vWe can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87pnc2vdka.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87r1wivdkz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87sggyvdld.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_compress_ops.
Let's switch to use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/87tv1evdlu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_component_driver has compr_ops, and each driver can
have callback via it. But, it is mainly created for ALSA, thus, it
doesn't have "component" as parameter.
Thus, each callback can't know it is called for which component.
Each callback currently is getting "component" by using
snd_soc_rtdcom_lookup() with driver name.
--- ALSA SoC ---
...
if (component->driver->compr_ops &&
component->driver->compr_ops->open)
=> return component->driver->compr_ops->open(stream);
...
--- driver ---
static int xxx_open(struct snd_compr_stream *stream)
{
struct snd_soc_pcm_runtime *rtd = stream->private_data;
=> struct snd_soc_component *component = snd_soc_rtdcom_lookup(..);
...
}
It works today, but, will not work in the future if we support multi
CPU/Codec/Platform, because 1 rtd might have multiple same driver
name component.
To solve this issue, each callback need to be called with component.
We already have many component driver callbacks.
This patch adds new snd_compress_ops, and call it with "component".
--- ALSA SoC ---
...
if (component->driver->compress_ops->open)
=> return component->driver->compress_ops->open(
component, substream);
~~~~~~~~~
...
--- driver ---
static int xxx_open(struct snd_soc_component *component,
struct snd_compr_stream *stream)
{
=> /* it don't need to use snd_soc_rtdcom_lookup() */
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87v9luvdmh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
EASRC (Enhanced Asynchronous Sample Rate Converter) is a new IP module
found on i.MX8MN. It is different with old ASRC module.
The primary features for the EASRC are as follows:
- 4 Contexts - groups of channels with an independent time base
- Fully independent and concurrent context control
- Simultaneous processing of up to 32 audio channels
- Programmable filter charachteristics for each context
- 32, 24, 20, and 16-bit fixed point audio sample support
- 32-bit floating point audio sample support
- 8kHz to 384kHz sample rate
- 1/16 to 8x sample rate conversion ratio
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Cosmin-Gabriel Samoila <cosmin.samoila@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/260d7a9fbddf9fa90760d30095df60a4c25fd0a1.1587038908.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a new ASRC included in i.MX serial platform, there
are some common definition can be shared with each other.
So move the common definition to a separate header file.
And add fsl_asrc_pair_priv and fsl_asrc_priv for
the variable specific for the module, which can be used
internally.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/7106993928ea9e9720e6b42ec601871103155b1c.1587038908.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to align with new ESARC, we add new property fsl,asrc-format.
The fsl,asrc-format can replace the fsl,asrc-width, driver
can accept format from devicetree, don't need to convert it to
format through width.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/2be9664768f32982ba4f71e49749f7390096ac9f.1587038908.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to align with new ESARC, we add new property fsl,asrc-format.
The fsl,asrc-format can replace the fsl,asrc-width, driver
can accept format from devicetree, don't need to convert it to
format through width.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/02f53d5512b9acd3492e2acdd5e0ba3113f18009.1587038908.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following coccicheck warning:
sound/soc/codecs/wcd934x.c:3881:8-17: WARNING: Comparison of 0/1 to bool
variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200420042833.19116-1-yanaijie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As these two drivers support I2C and SPI, we should add the SND_SOC_I2C_AND_SPI
dependency instead.
Fixes: ce0c97f8a2 ("ASoC: Fix SND_SOC_ALL_CODECS imply SPI fallout")
Signed-off-by: Wei Li <liwei391@huawei.com>
Link: https://lore.kernel.org/r/20200420202410.47327-3-liwei391@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When I2C=m, SND_SOC_WM8900=y, SND_SOC_WM8988=y, SND_SOC_WM8995=y:
sound/soc/codecs/wm8900.o: In function `wm8900_i2c_probe':
wm8900.c:(.text+0xa16): undefined reference to `__devm_regmap_init_i2c'
sound/soc/codecs/wm8900.o: In function `wm8900_modinit':
wm8900.c:(.init.text+0xb): undefined reference to `i2c_register_driver'
sound/soc/codecs/wm8900.o: In function `wm8900_exit':
wm8900.c:(.exit.text+0x8): undefined reference to `i2c_del_driver'
sound/soc/codecs/wm8988.o: In function `wm8988_i2c_probe':
wm8988.c:(.text+0x86b): undefined reference to `__devm_regmap_init_i2c'
sound/soc/codecs/wm8988.o: In function `wm8988_modinit':
wm8988.c:(.init.text+0xb): undefined reference to `i2c_register_driver'
sound/soc/codecs/wm8988.o: In function `wm8988_exit':
wm8988.c:(.exit.text+0x8): undefined reference to `i2c_del_driver'
sound/soc/codecs/wm8995.o: In function `wm8995_i2c_probe':
wm8995.c:(.text+0x1b5b): undefined reference to `__devm_regmap_init_i2c'
sound/soc/codecs/wm8995.o: In function `wm8995_modinit':
wm8995.c:(.init.text+0xb): undefined reference to `i2c_register_driver'
sound/soc/codecs/wm8995.o: In function `wm8995_exit':
wm8995.c:(.exit.text+0x8): undefined reference to `i2c_del_driver'
As these drivers support I2C and SPI, we add the SND_SOC_I2C_AND_SPI
dependency to solve it.
Fixes: ea00d95200 ("ASoC: Use imply for SND_SOC_ALL_CODECS")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Li <liwei391@huawei.com>
Link: https://lore.kernel.org/r/20200420202410.47327-2-liwei391@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix rsnd_dai_call() operations being performed twice for the master SSI
in multi-SSI setups, and fix the rsnd_ssi_stop operation for multi-SSI
setups.
The only visible effect of these issues was some "status check failed"
spam when the rsnd_ssi_stop was called, but overall the code is cleaner
now, and some questionable writes to the SSICR register which did not
lead to any observable misbehaviour but were contrary to the datasheet
are fixed.
Mark:
The first patch kind of reverts my "ASoC: rsnd: Fix parent SSI
start/stop in multi-SSI mode" from a few days ago and achieves the same
effect in a simpler fashion, if you would prefer a clean patch series
based on v5.6 drop me a note.
Greetings,
Matthias
Matthias Blankertz (2):
ASoC: rsnd: Don't treat master SSI in multi SSI setup as parent
ASoC: rsnd: Fix "status check failed" spam for multi-SSI
sound/soc/sh/rcar/ssi.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
base-commit: 15a5760cb8
--
2.26.1
This patchset fixes the problem reported by Marc in this thread [0]
The problem was due to an error in the meson card drivers which had
the "no_pcm" dai_link property set on codec-to-codec links
[0]: https://lore.kernel.org/r/20200417122732.GC5315@sirena.org.uk
Jerome Brunet (2):
ASoC: meson: axg-card: fix codec-to-codec link setup
ASoC: meson: gx-card: fix codec-to-codec link setup
sound/soc/meson/axg-card.c | 4 +++-
sound/soc/meson/gx-card.c | 4 +++-
2 files changed, 6 insertions(+), 2 deletions(-)
--
2.25.2
snd_soc_dapm_kcontrol widget which is created by autodisable control
should contain correct on_val, mask and shift because it is set when the
widget is powered and changed value is applied on registers by following
code in dapm_seq_run_coalesced().
mask |= w->mask << w->shift;
if (w->power)
value |= w->on_val << w->shift;
else
value |= w->off_val << w->shift;
Shift on the mask in dapm_kcontrol_data_alloc() is removed to prevent
double shift.
And, on_val in dapm_kcontrol_set_value() is modified to get correct
value in the dapm_seq_run_coalesced().
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/000001d61537$b212f620$1638e260$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the rsnd_ssi_stop function to skip disabling the individual SSIs of
a multi-SSI setup, as the actual stop is performed by rsnd_ssiu_stop_gen2
- the same logic as in rsnd_ssi_start. The attempt to disable these SSIs
was harmless, but caused a "status check failed" message to be printed
for every SSI in the multi-SSI setup.
The disabling of interrupts is still performed, as they are enabled for
all SSIs in rsnd_ssi_init, but care is taken to not accidentally set the
EN bit for an SSI where it was not set by rsnd_ssi_start.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200417153017.1744454-3-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The master SSI of a multi-SSI setup was attached both to the
RSND_MOD_SSI slot and the RSND_MOD_SSIP slot of the rsnd_dai_stream.
This is not correct wrt. the meaning of being "parent" in the rest of
the SSI code, where it seems to indicate an SSI that provides clock and
word sync but is not transmitting/receiving audio data.
Not treating the multi-SSI master as parent allows removal of various
special cases to the rsnd_ssi_is_parent conditions introduced in commit
a09fb3f28a ("ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode").
It also fixes the issue that operations performed via rsnd_dai_call()
were performed twice for the master SSI. This caused some "status check
failed" spam when stopping a multi-SSI stream as the driver attempted to
stop the master SSI twice.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200417153017.1744454-2-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the addition of commit 9b5db05936 ("ASoC: soc-pcm: dpcm: Only allow
playback/capture if supported"), meson-axg cards which have codec-to-codec
links fail to init and Oops.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000128
Internal error: Oops: 96000044 [#1] PREEMPT SMP
CPU: 3 PID: 1582 Comm: arecord Not tainted 5.7.0-rc1
pc : invalidate_paths_ep+0x30/0xe0
lr : snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
Call trace:
invalidate_paths_ep+0x30/0xe0
snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
dpcm_path_get+0x38/0xd0
dpcm_fe_dai_open+0x70/0x920
snd_pcm_open_substream+0x564/0x840
snd_pcm_open+0xfc/0x228
snd_pcm_capture_open+0x4c/0x78
snd_open+0xac/0x1a8
...
While this error was initially reported the axg-card type, it also applies
to the gx-card type.
While initiliazing the links, ASoC treats the codec-to-codec links of this
card type as a DPCM backend. This error eventually leads to the Oops.
Most of the card driver code is shared between DPCM backends and
codec-to-codec links. The property "no_pcm" marking DCPM BE was left set on
codec-to-codec links, leading to this problem. This commit fixes that.
Fixes: e37a0c313a ("ASoC: meson: gx: add sound card support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200420114511.450560-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the addition of commit 9b5db05936 ("ASoC: soc-pcm: dpcm: Only allow
playback/capture if supported"), meson-axg cards which have codec-to-codec
links fail to init and Oops:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000128
Internal error: Oops: 96000044 [#1] PREEMPT SMP
CPU: 3 PID: 1582 Comm: arecord Not tainted 5.7.0-rc1
pc : invalidate_paths_ep+0x30/0xe0
lr : snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
Call trace:
invalidate_paths_ep+0x30/0xe0
snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
dpcm_path_get+0x38/0xd0
dpcm_fe_dai_open+0x70/0x920
snd_pcm_open_substream+0x564/0x840
snd_pcm_open+0xfc/0x228
snd_pcm_capture_open+0x4c/0x78
snd_open+0xac/0x1a8
...
While initiliazing the links, ASoC treats the codec-to-codec links of this
card type as a DPCM backend. This error eventually leads to the Oops.
Most of the card driver code is shared between DPCM backends and
codec-to-codec links. The property "no_pcm" marking DCPM BE was left set on
codec-to-codec links, leading to this problem. This commit fixes that.
Fixes: 0a8f1117a6 ("ASoC: meson: axg-card: add basic codec-to-codec link support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200420114511.450560-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update D0 <-> D3 sequence to correctly transition hardware and DSP core
from and to D3. On top of that, set SHIM registers to their recommended
defaults during D0 and D3 proceduces as HW does not reset registers for
us.
Connected to:
[alsa-devel][BUG] bdw-rt5650 DSP boot timeout
https://mailman.alsa-project.org/pipermail/alsa-devel/2019-July/153098.html
Github issue ticket reference:
https://github.com/thesofproject/linux/pull/1842
Tested on:
- BDW-Y RVP with rt286
- SAMUS with rt5677
Proposed solution (both in July 2019 and on github):
'Revert "ASoC: Intel: Work around to fix HW d3 potential crash issue"'
is NAKed as it only covers the problem up and actually brings back the
undefined behavior: some registers (e.g.: APLLSE) are describing LPT
offsets rather than WPT ones. In consequence, during power-transitions
driver issues incorrect writes and leaves the regs of interest alone.
Existing patch - the non-revert - does not resolve the HW D3 issue at
all as it ignores the recommended sequence and does not initialize
hardware registers as expected. And thus, leaving things as are is also
unacceptable.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Ross Zwisler <zwisler@google.com>
Link: https://lore.kernel.org/r/20200330194520.13253-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Major regressions were detected by SOF CI on CherryTrail and Broadwell:
[ 25.705750] SSP2-Codec: ASoC: no backend playback stream
[ 27.923378] SSP2-Codec: ASoC: no users playback at close - state
This is root-caused to the introduction of the DAI capability checks
with snd_soc_dai_stream_valid(). Its use in soc-pcm.c makes it a
requirement for all DAIs to report at least a non-zero min_channels
field.
For some reason the SSP structures used for SKL+ did provide this
information but legacy platforms didn't.
Fixes: 9b5db05936 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200417172014.11760-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This fixes two issues in the snd-soc-rcar driver blocking multichannel
HDMI audio out: The parent SSI in a multi-SSI configuration is not
correctly set up and started, and the SSI->HDMI channel mapping is
wrong.
With these patches, the following device tree snippet can be used on an
r8a7795-based platform (Salvator-X) to enable multichannel HDMI audio on
HDMI0:
rsnd_port1: port@1 {
rsnd_endpoint1: endpoint {
remote-endpoint = <&dw_hdmi0_snd_in>;
dai-format = "i2s";
bitclock-master = <&rsnd_endpoint1>;
frame-master = <&rsnd_endpoint1>;
playback = <&ssi0 &ssi1 &ssi2 &ssi9>;
};
};
With a capable receiver attached, all of 2ch (stereo), 6ch (e.g. 5.1)
and 8ch audio output should work.
Matthias Blankertz (2):
ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode
ASoC: rsnd: Fix HDMI channel mapping for multi-SSI mode
sound/soc/sh/rcar/ssi.c | 8 ++++----
sound/soc/sh/rcar/ssiu.c | 2 +-
2 files changed, 5 insertions(+), 5 deletions(-)
base-commit: 7111951b8d
--
2.26.0
If we don't find any pcm, pcm will point at address at an offset from
the the list head and not a meaningful structure. Fix this by returning
correct pcm if found and NULL if not. Found with coccinelle.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415162849.308-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDMI?_SEL register maps up to four stereo SSI data lanes onto the
sdata[0..3] inputs of the HDMI output block. The upper half of the
register contains four blocks of 4 bits, with the most significant
controlling the sdata3 line and the least significant the sdata0 line.
The shift calculation has an off-by-one error, causing the parent SSI to
be mapped to sdata3, the first multi-SSI child to sdata0 and so forth.
As the parent SSI transmits the stereo L/R channels, and the HDMI core
expects it on the sdata0 line, this causes no audio to be output when
playing stereo audio on a multichannel capable HDMI out, and
multichannel audio has permutated channels.
Fix the shift calculation to map the parent SSI to sdata0, the first
child to sdata1 etc.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200415141017.384017-3-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The parent SSI of a multi-SSI setup must be fully setup, started and
stopped since it is also part of the playback/capture setup. So only
skip the SSI (as per commit 203cdf51f2 ("ASoC: rsnd: SSI parent cares
SWSP bit") and commit 597b046f0d ("ASoC: rsnd: control SSICR::EN
correctly")) if the SSI is parent outside of a multi-SSI setup.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200415141017.384017-2-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Long series made of a relatively small changes from multiple SOF
contributors. I didn't find a good way to split this series since it
tracks SOF minor ABI changes (backwards-compatible with older firmware
files) and needs to be kept in-order. Future series should be much
shorter.
The main addition is support for an extended firmware manifest, which
helps retrieve capabilities directly from the firmware file instead of
the current IPC mechanism (still supported but will be deprecated).
The IPC is realigned with the firmware, along with type cleanups, and
the DMIC interface is simplified.
The topology changes are mainly about a multi-cpu DAI fix, a new DC
blocking component, better parsing of tuples and new parameters for
ALH (SoundWire) and HDaudio DAIs. New tokens are also added to clarify
the firmware behavior in the case of dependent pipelines, e.g. for
echo reference generation.
Artur Kloniecki (1):
ASoC: SOF: Add XRUN flags field to struct sof_ipc_buffer.
Bard Liao (5):
ASoC: SOF: topology: fix: handle DAI widget connections properly with
multiple CPU DAI's
ASoC: SOF: align sof_ipc_dai_alh_params with FW
ASoC: SOF: topology: Get ALH rate amd channels from topology
ASoC: SOF: topology: fix: parse hda_tokens to &config->hda
ASoC: SOF: topology: Get HDA rate and channels from topology
Jaska Uimonen (2):
ASoC: SOF: topology: stop parsing when all tokens have been found
ASoC: SOF: topology: handle multiple sets of tuple arrays
Karol Trzcinski (6):
ASoC: SOF: Mark get_ext* function ext_hdr arguments as const
ASoC: SOF: Introduce offset in firmware data
ASoC: SOF: Introduce extended manifest
ASoC: SOF: ext_manifest: parse firmware version
ASoC: SOF: ext_manifest: parse windows
ASoC: SOF: ext_manifest: parse compiler version
Pan Xiuli (6):
ASoC: SOF: add probe support extend data
ASoC: SOF: add debug ABI version
ASoC: SOF: change type char to uint8_t in info.h
ASoC: SOF: change type char to uint8_t in trace.h
ASoC: SOF: change type char to uint8_t in topology.h
ASoC: SOF: make sof_ipc_cc_version to fixed length
Sebastiano Carlucci (1):
ASoC: SOF: topology: Add support for DC Blocker
Seppo Ingalsuo (3):
ASoC: SOF: Intel: Fix typo in header file comment text
ASoC: SOF: Intel: Change DMIC load IPC to fixed length
ASoC: SOF: Intel: Rename deprecated DMIC IPC struct field
include/sound/sof.h | 3 +
include/sound/sof/dai-intel.h | 20 +-
include/sound/sof/info.h | 26 ++-
include/sound/sof/topology.h | 16 +-
include/sound/sof/trace.h | 2 +-
include/uapi/sound/sof/abi.h | 2 +-
include/uapi/sound/sof/ext_manifest.h | 91 ++++++++
include/uapi/sound/sof/tokens.h | 8 +
sound/soc/sof/intel/hda-loader.c | 9 +-
sound/soc/sof/loader.c | 226 ++++++++++++++++--
sound/soc/sof/topology.c | 323 ++++++++++++++++----------
11 files changed, 568 insertions(+), 158 deletions(-)
create mode 100644 include/uapi/sound/sof/ext_manifest.h
base-commit: 83b35f4586
--
2.20.1
Daniel Baluta <daniel.baluta@nxp.com>:
From: Daniel Baluta <daniel.baluta@nxp.com>
This patch series adds support for SOF on i.MX8M family. First board
from this family that has a DSP is i.MX8MP.
First 2 patches are trying to fix some compilation issues, the next two
are adding the imx8m support and the last one adds the devicetree
binding.
Changes since v2:
- add reviewed by from Rob to DT patch
- fix ownership for patch 2
Daniel Baluta (3):
ASoC: SOF: imx: Add i.MX8M HW support
ASoC: SOF: Add i.MX8MP device descriptor
dt-bindings: dsp: fsl: Add fsl,imx8mp-dsp entry
Pierre-Louis Bossart (1):
ASoC: SOF: imx: fix undefined reference issue
YueHaibing (1):
ASoC: SOF: imx8: Fix randbuild error
.../devicetree/bindings/dsp/fsl,dsp.yaml | 2 +
sound/soc/sof/imx/Kconfig | 32 +-
sound/soc/sof/imx/Makefile | 2 +
sound/soc/sof/imx/imx8m.c | 279 ++++++++++++++++++
sound/soc/sof/sof-of-dev.c | 14 +
5 files changed, 325 insertions(+), 4 deletions(-)
create mode 100644 sound/soc/sof/imx/imx8m.c
--
2.17.1
Widget's parameters are set in topology and they usually consist of
several different types of tuple arrays like strings, words and bytes.
Here this kind of combination is called a "set".
Lately we've seen more complex widget definitions with multiple
identical sets of tuple arrays. One example is the dmic pdm
configuration, which is currently handled as a special case in token
parsing. This is not scalable for other components with multiple sets.
So add a new function sof_parse_token_sets, which can be used to parse
multiple sets. This function defines the number of sets and an offset to
copy the tokens to correct positions in the destination ipc struct. Old
sof_parse_token function will be a special case of calling
sof_parse_token_sets to parse 1 set with offset 0.
Finally modify the dmic dai link loading to use the new
sof_parse_array_sets to load multiple pdm configs.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-25-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Optimize the parsing so that it will stop after all required tokens
have been found as there is no reason to continue after that.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
FW interface for HDA DAI parameters was extended with information on
sampling rate and channel count in version 3.16. Align kernel header
with the FW change. This change is backwards compatible. Old firmware
will ignore the values.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Items in hda_tokens are for &config->hda. So fix it to the right
object. This error has been harmless as hda_tokens array was empty.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
FW will need these params for synchronized playback over multiple
DAIs.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Sławomir Błauciak <slawomir.blauciak@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch restores the field name to fifo_bits_b since the
legacy firmware compatibility code (for firmware ABI 3.0.0 or earlier)
sets it in sof_link_dmic_load() function in topology.c. Setting of
reserved_2 didn't look appropriate.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch changes the flexible array member pdm[] into a fixed
array of four that is the max. number of stereo PDM controllers
in the current Intel platforms. The change simplifies DMIC DAI
load code and aligns the IPC with other DAI types.
The change is compatible with old and new firmware with similar
change. The ABI minor version is increased due to change in
IPC headers.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit adds the enumerations to support the dc blocker component
from SOF.
Signed-off-by: Sebastiano Carlucci <scarlucci@google.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The compiler version and description can be extracted from the
extended manifest content. This information known at build time
does not need to be provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The window description can be extracted from the extended manifest
content. This information known at build time does not need to be
provided in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200415202816.934-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
