Commit Graph

215 Commits

Author SHA1 Message Date
David S. Miller
b4aa9e05a6 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/bnx2x/bnx2x.h
	drivers/net/wireless/iwlwifi/iwl-1000.c
	drivers/net/wireless/iwlwifi/iwl-6000.c
	drivers/net/wireless/iwlwifi/iwl-core.h
	drivers/vhost/vhost.c
2010-12-17 12:27:22 -08:00
Michał Mirosław
55508d601d net: Use skb_checksum_start_offset()
Replace skb->csum_start - skb_headroom(skb) with skb_checksum_start_offset().

Note for usb/smsc95xx: skb->data - skb->head == skb_headroom(skb).

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 14:43:14 -08:00
Octavian Purdila
fcbdf09d96 net: fix nulls list corruptions in sk_prot_alloc
Special care is taken inside sk_port_alloc to avoid overwriting
skc_node/skc_nulls_node. We should also avoid overwriting
skc_bind_node/skc_portaddr_node.

The patch fixes the following crash:

 BUG: unable to handle kernel paging request at fffffffffffffff0
 IP: [<ffffffff812ec6dd>] udp4_lib_lookup2+0xad/0x370
 [<ffffffff812ecc22>] __udp4_lib_lookup+0x282/0x360
 [<ffffffff812ed63e>] __udp4_lib_rcv+0x31e/0x700
 [<ffffffff812bba45>] ? ip_local_deliver_finish+0x65/0x190
 [<ffffffff812bbbf8>] ? ip_local_deliver+0x88/0xa0
 [<ffffffff812eda35>] udp_rcv+0x15/0x20
 [<ffffffff812bba45>] ip_local_deliver_finish+0x65/0x190
 [<ffffffff812bbbf8>] ip_local_deliver+0x88/0xa0
 [<ffffffff812bb2cd>] ip_rcv_finish+0x32d/0x6f0
 [<ffffffff8128c14c>] ? netif_receive_skb+0x99c/0x11c0
 [<ffffffff812bb94b>] ip_rcv+0x2bb/0x350
 [<ffffffff8128c14c>] netif_receive_skb+0x99c/0x11c0

Signed-off-by: Leonard Crestez <lcrestez@ixiacom.com>
Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 14:26:56 -08:00
Changli Gao
5811662b15 net: use the macros defined for the members of flowi
Use the macros defined for the members of flowi to clean the code up.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 12:27:45 -08:00
Eric Dumazet
c31504dc0d udp: use atomic_inc_not_zero_hint
UDP sockets refcount is usually 2, unless an incoming frame is going to
be queued in receive or backlog queue.

Using atomic_inc_not_zero_hint() permits to reduce latency, because
processor issues less memory transactions.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-16 11:17:43 -08:00
Eric Dumazet
8d987e5c75 net: avoid limits overflow
Robin Holt tried to boot a 16TB machine and found some limits were
reached : sysctl_tcp_mem[2], sysctl_udp_mem[2]

We can switch infrastructure to use long "instead" of "int", now
atomic_long_t primitives are available for free.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Robin Holt <holt@sgi.com>
Reviewed-by: Robin Holt <holt@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-10 12:12:00 -08:00
Eric Dumazet
0d7da9ddd9 net: add __rcu annotation to sk_filter
Add __rcu annotation to :
        (struct sock)->sk_filter

And use appropriate rcu primitives to reduce sparse warnings if
CONFIG_SPARSE_RCU_POINTER=y

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25 14:18:28 -07:00
David S. Miller
e548833df8 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	net/mac80211/main.c
2010-09-09 22:27:33 -07:00
Eric Dumazet
719f835853 udp: add rehash on connect()
commit 30fff923 introduced in linux-2.6.33 (udp: bind() optimisation)
added a secondary hash on UDP, hashed on (local addr, local port).

Problem is that following sequence :

fd = socket(...)
connect(fd, &remote, ...)

not only selects remote end point (address and port), but also sets
local address, while UDP stack stored in secondary hash table the socket
while its local address was INADDR_ANY (or ipv6 equivalent)

Sequence is :
 - autobind() : choose a random local port, insert socket in hash tables
              [while local address is INADDR_ANY]
 - connect() : set remote address and port, change local address to IP
              given by a route lookup.

When an incoming UDP frame comes, if more than 10 sockets are found in
primary hash table, we switch to secondary table, and fail to find
socket because its local address changed.

One solution to this problem is to rehash datagram socket if needed.

We add a new rehash(struct socket *) method in "struct proto", and
implement this method for UDP v4 & v6, using a common helper.

This rehashing only takes care of secondary hash table, since primary
hash (based on local port only) is not changed.

Reported-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-08 21:45:01 -07:00
Oliver Hartkopp
2244d07bfa net: simplify flags for tx timestamping
This patch removes the abstraction introduced by the union skb_shared_tx in
the shared skb data.

The access of the different union elements at several places led to some
confusion about accessing the shared tx_flags e.g. in skb_orphan_try().

    http://marc.info/?l=linux-netdev&m=128084897415886&w=2

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19 00:08:30 -07:00
Changli Gao
d8d1f30b95 net-next: remove useless union keyword
remove useless union keyword in rtable, rt6_info and dn_route.

Since there is only one member in a union, the union keyword isn't useful.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10 23:31:35 -07:00
Eric Dumazet
b1faf56664 net: sock_queue_err_skb() dont mess with sk_forward_alloc
Correct sk_forward_alloc handling for error_queue would need to use a
backlog of frames that softirq handler could not deliver because socket
is owned by user thread. Or extend backlog processing to be able to
process normal and error packets.

Another possibility is to not use mem charge for error queue, this is
what I implemented in this patch.

Note: this reverts commit 29030374
(net: fix sk_forward_alloc corruptions), since we dont need to lock
socket anymore.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-31 23:44:05 -07:00
David S. Miller
64960848ab Merge branch 'master' of /home/davem/src/GIT/linux-2.6/ 2010-05-31 05:46:45 -07:00
Eric Dumazet
2903037400 net: fix sk_forward_alloc corruptions
As David found out, sock_queue_err_skb() should be called with socket
lock hold, or we risk sk_forward_alloc corruption, since we use non
atomic operations to update this field.

This patch adds bh_lock_sock()/bh_unlock_sock() pair to three spots.
(BH already disabled)

1) skb_tstamp_tx() 
2) Before calling ip_icmp_error(), in __udp4_lib_err() 
3) Before calling ipv6_icmp_error(), in __udp6_lib_err()

Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 00:20:48 -07:00
Linus Torvalds
72da3bc0cb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (22 commits)
  netlink: bug fix: wrong size was calculated for vfinfo list blob
  netlink: bug fix: don't overrun skbs on vf_port dump
  xt_tee: use skb_dst_drop()
  netdev/fec: fix ifconfig eth0 down hang issue
  cnic: Fix context memory init. on 5709.
  drivers/net: Eliminate a NULL pointer dereference
  drivers/net/hamradio: Eliminate a NULL pointer dereference
  be2net: Patch removes redundant while statement in loop.
  ipv6: Add GSO support on forwarding path
  net: fix __neigh_event_send()
  vhost: fix the memory leak which will happen when memory_access_ok fails
  vhost-net: fix to check the return value of copy_to/from_user() correctly
  vhost: fix to check the return value of copy_to/from_user() correctly
  vhost: Fix host panic if ioctl called with wrong index
  net: fix lock_sock_bh/unlock_sock_bh
  net/iucv: Add missing spin_unlock
  net: ll_temac: fix checksum offload logic
  net: ll_temac: fix interrupt bug when interrupt 0 is used
  sctp: dubious bitfields in sctp_transport
  ipmr: off by one in __ipmr_fill_mroute()
  ...
2010-05-28 10:18:40 -07:00
Eric Dumazet
8a74ad60a5 net: fix lock_sock_bh/unlock_sock_bh
This new sock lock primitive was introduced to speedup some user context
socket manipulation. But it is unsafe to protect two threads, one using
regular lock_sock/release_sock, one using lock_sock_bh/unlock_sock_bh

This patch changes lock_sock_bh to be careful against 'owned' state.
If owned is found to be set, we must take the slow path.
lock_sock_bh() now returns a boolean to say if the slow path was taken,
and this boolean is used at unlock_sock_bh time to call the appropriate
unlock function.

After this change, BH are either disabled or enabled during the
lock_sock_bh/unlock_sock_bh protected section. This might be misleading,
so we rename these functions to lock_sock_fast()/unlock_sock_fast().

Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-27 00:30:53 -07:00
Alexey Dobriyan
4be929be34 kernel-wide: replace USHORT_MAX, SHORT_MAX and SHORT_MIN with USHRT_MAX, SHRT_MAX and SHRT_MIN
- C99 knows about USHRT_MAX/SHRT_MAX/SHRT_MIN, not
  USHORT_MAX/SHORT_MAX/SHORT_MIN.

- Make SHRT_MIN of type s16, not int, for consistency.

[akpm@linux-foundation.org: fix drivers/dma/timb_dma.c]
[akpm@linux-foundation.org: fix security/keys/keyring.c]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:02 -07:00
Amerigo Wang
e3826f1e94 net: reserve ports for applications using fixed port numbers
(Dropped the infiniband part, because Tetsuo modified the related code,
I will send a separate patch for it once this is accepted.)

This patch introduces /proc/sys/net/ipv4/ip_local_reserved_ports which
allows users to reserve ports for third-party applications.

The reserved ports will not be used by automatic port assignments
(e.g. when calling connect() or bind() with port number 0). Explicit
port allocation behavior is unchanged.

Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-15 23:28:40 -07:00
David S. Miller
278554bd65 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/net/wireless/ath/ar9170/usb.c
	drivers/scsi/iscsi_tcp.c
	net/ipv4/ipmr.c
2010-05-12 00:05:35 -07:00
Bjørn Mork
ccc2d97cb7 ipv4: udp: fix short packet and bad checksum logging
commit 2783ef23 moved the initialisation of saddr and daddr after
pskb_may_pull() to avoid a potential data corruption.  Unfortunately
also placing it after the short packet and bad checksum error paths,
where these variables are used for logging.  The result is bogus
output like

[92238.389505] UDP: short packet: From 2.0.0.0:65535 23715/178 to 0.0.0.0:65535

Moving the saddr and daddr initialisation above the error paths, while still
keeping it after the pskb_may_pull() to keep the fix from commit 2783ef23.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Cc: stable@kernel.org
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 21:49:59 -07:00
Eric Dumazet
f84af32cbc net: ip_queue_rcv_skb() helper
When queueing a skb to socket, we can immediately release its dst if
target socket do not use IP_CMSG_PKTINFO.

tcp_data_queue() can drop dst too.

This to benefit from a hot cache line and avoid the receiver, possibly
on another cpu, to dirty this cache line himself.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 15:31:51 -07:00
Eric Dumazet
4b0b72f7dd net: speedup udp receive path
Since commit 95766fff ([UDP]: Add memory accounting.), 
each received packet needs one extra sock_lock()/sock_release() pair.

This added latency because of possible backlog handling. Then later,
ticket spinlocks added yet another latency source in case of DDOS.

This patch introduces lock_sock_bh() and unlock_sock_bh()
synchronization primitives, avoiding one atomic operation and backlog
processing.

skb_free_datagram_locked() uses them instead of full blown
lock_sock()/release_sock(). skb is orphaned inside locked section for
proper socket memory reclaim, and finally freed outside of it.

UDP receive path now take the socket spinlock only once.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28 14:35:48 -07:00
Eric Dumazet
c377411f24 net: sk_add_backlog() take rmem_alloc into account
Current socket backlog limit is not enough to really stop DDOS attacks,
because user thread spend many time to process a full backlog each
round, and user might crazy spin on socket lock.

We should add backlog size and receive_queue size (aka rmem_alloc) to
pace writers, and let user run without being slow down too much.

Introduce a sk_rcvqueues_full() helper, to avoid taking socket lock in
stress situations.

Under huge stress from a multiqueue/RPS enabled NIC, a single flow udp
receiver can now process ~200.000 pps (instead of ~100 pps before the
patch) on a 8 core machine.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27 15:13:20 -07:00
David S. Miller
c58dc01bab net: Make RFS socket operations not be inet specific.
Idea from Eric Dumazet.

As for placement inside of struct sock, I tried to choose a place
that otherwise has a 32-bit hole on 64-bit systems.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
2010-04-27 15:11:48 -07:00
Eric Dumazet
0eae88f31c net: Fix various endianness glitches
Sparse can help us find endianness bugs, but we need to make some
cleanups to be able to more easily spot real bugs.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20 19:06:52 -07:00
Tom Herbert
fec5e652e5 rfs: Receive Flow Steering
This patch implements receive flow steering (RFS).  RFS steers
received packets for layer 3 and 4 processing to the CPU where
the application for the corresponding flow is running.  RFS is an
extension of Receive Packet Steering (RPS).

The basic idea of RFS is that when an application calls recvmsg
(or sendmsg) the application's running CPU is stored in a hash
table that is indexed by the connection's rxhash which is stored in
the socket structure.  The rxhash is passed in skb's received on
the connection from netif_receive_skb.  For each received packet,
the associated rxhash is used to look up the CPU in the hash table,
if a valid CPU is set then the packet is steered to that CPU using
the RPS mechanisms.

The convolution of the simple approach is that it would potentially
allow OOO packets.  If threads are thrashing around CPUs or multiple
threads are trying to read from the same sockets, a quickly changing
CPU value in the hash table could cause rampant OOO packets--
we consider this a non-starter.

To avoid OOO packets, this solution implements two types of hash
tables: rps_sock_flow_table and rps_dev_flow_table.

rps_sock_table is a global hash table.  Each entry is just a CPU
number and it is populated in recvmsg and sendmsg as described above.
This table contains the "desired" CPUs for flows.

rps_dev_flow_table is specific to each device queue.  Each entry
contains a CPU and a tail queue counter.  The CPU is the "current"
CPU for a matching flow.  The tail queue counter holds the value
of a tail queue counter for the associated CPU's backlog queue at
the time of last enqueue for a flow matching the entry.

Each backlog queue has a queue head counter which is incremented
on dequeue, and so a queue tail counter is computed as queue head
count + queue length.  When a packet is enqueued on a backlog queue,
the current value of the queue tail counter is saved in the hash
entry of the rps_dev_flow_table.

And now the trick: when selecting the CPU for RPS (get_rps_cpu)
the rps_sock_flow table and the rps_dev_flow table for the RX queue
are consulted.  When the desired CPU for the flow (found in the
rps_sock_flow table) does not match the current CPU (found in the
rps_dev_flow table), the current CPU is changed to the desired CPU
if one of the following is true:

- The current CPU is unset (equal to RPS_NO_CPU)
- Current CPU is offline
- The current CPU's queue head counter >= queue tail counter in the
rps_dev_flow table.  This checks if the queue tail has advanced
beyond the last packet that was enqueued using this table entry.
This guarantees that all packets queued using this entry have been
dequeued, thus preserving in order delivery.

Making each queue have its own rps_dev_flow table has two advantages:
1) the tail queue counters will be written on each receive, so
keeping the table local to interrupting CPU s good for locality.  2)
this allows lockless access to the table-- the CPU number and queue
tail counter need to be accessed together under mutual exclusion
from netif_receive_skb, we assume that this is only called from
device napi_poll which is non-reentrant.

This patch implements RFS for TCP and connected UDP sockets.
It should be usable for other flow oriented protocols.

There are two configuration parameters for RFS.  The
"rps_flow_entries" kernel init parameter sets the number of
entries in the rps_sock_flow_table, the per rxqueue sysfs entry
"rps_flow_cnt" contains the number of entries in the rps_dev_flow
table for the rxqueue.  Both are rounded to power of two.

The obvious benefit of RFS (over just RPS) is that it achieves
CPU locality between the receive processing for a flow and the
applications processing; this can result in increased performance
(higher pps, lower latency).

The benefits of RFS are dependent on cache hierarchy, application
load, and other factors.  On simple benchmarks, we don't necessarily
see improvement and sometimes see degradation.  However, for more
complex benchmarks and for applications where cache pressure is
much higher this technique seems to perform very well.

Below are some benchmark results which show the potential benfit of
this patch.  The netperf test has 500 instances of netperf TCP_RR
test with 1 byte req. and resp.  The RPC test is an request/response
test similar in structure to netperf RR test ith 100 threads on
each host, but does more work in userspace that netperf.

e1000e on 8 core Intel
   No RFS or RPS		104K tps at 30% CPU
   No RFS (best RPS config):    290K tps at 63% CPU
   RFS				303K tps at 61% CPU

RPC test	tps	CPU%	50/90/99% usec latency	Latency StdDev
  No RFS/RPS	103K	48%	757/900/3185		4472.35
  RPS only:	174K	73%	415/993/2468		491.66
  RFS		223K	73%	379/651/1382		315.61

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16 16:01:27 -07:00
David S. Miller
4a1032faac Merge branch 'master' of /home/davem/src/GIT/linux-2.6/ 2010-04-11 02:44:30 -07:00
Jorge Boncompte [DTI2]
1223c67c09 udp: fix for unicast RX path optimization
Commits 5051ebd275 and
5051ebd275 ("ipv[46]: udp: optimize unicast RX
path") broke some programs.

	After upgrading a L2TP server to 2.6.33 it started to fail, tunnels going up an
down, after the 10th tunnel came up. My modified rp-l2tp uses a global
unconnected socket bound to (INADDR_ANY, 1701) and one connected socket per
tunnel after parameter negotiation.

	After ten sockets were open and due to mixed parameters to
udp[46]_lib_lookup2() kernel started to drop packets.

Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-08 11:29:13 -07:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Zhu Yi
a3a858ff18 net: backlog functions rename
sk_add_backlog -> __sk_add_backlog
sk_add_backlog_limited -> sk_add_backlog

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-05 13:34:03 -08:00
Zhu Yi
55349790d7 udp: use limited socket backlog
Make udp adapt to the limited socket backlog change.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: "Pekka Savola (ipv6)" <pekkas@netcore.fi>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-05 13:34:00 -08:00
Gerrit Renker
81d54ec847 udp: remove redundant variable
The variable 'copied' is used in udp_recvmsg() to emphasize that the passed
'len' is adjusted to fit the actual datagram length. But the same can be
done by adjusting 'len' directly. This patch thus removes the indirection.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12 16:51:10 -08:00
Alexey Dobriyan
2c8c1e7297 net: spread __net_init, __net_exit
__net_init/__net_exit are apparently not going away, so use them
to full extent.

In some cases __net_init was removed, because it was called from
__net_exit code.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-17 19:16:02 -08:00
Eric Dumazet
5781b2356c udp: udp_lib_get_port() fix
Now we can have a large udp hash table, udp_lib_get_port() loop
should be converted to a do {} while (cond) form,
or we dont enter it at all if hash table size is exactly 65536.

Reported-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-13 19:32:39 -08:00
Joe Perches
9d4fb27db9 net/ipv4: Move && and || to end of previous line
On Sun, 2009-11-22 at 16:31 -0800, David Miller wrote:
> It should be of the form:
> 	if (x &&
> 	    y)
> 
> or:
> 	if (x && y)
> 
> Fix patches, rather than complaints, for existing cases where things
> do not follow this pattern are certainly welcome.

Also collapsed some multiple tabs to single space.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23 10:41:23 -08:00
Eric Dumazet
30fff9231f udp: bind() optimisation
UDP bind() can be O(N^2) in some pathological cases.

Thanks to secondary hash tables, we can make it O(N)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-10 20:54:38 -08:00
Eric Dumazet
f6b8f32ca7 udp: multicast RX should increment SNMP/sk_drops counter in allocation failures
When skb_clone() fails, we should increment sk_drops and SNMP counters.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-08 20:53:10 -08:00
Eric Dumazet
1240d1373c ipv4: udp: Optimise multicast reception
UDP multicast rx path is a bit complex and can hold a spinlock
for a long time.

Using a small (32 or 64 entries) stack of socket pointers can help
to perform expensive operations (skb_clone(), udp_queue_rcv_skb())
outside of the lock, in most cases.

It's also a base for a future RCU conversion of multicast recption.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Lucian Adrian Grijincu <lgrijincu@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-08 20:53:08 -08:00
Eric Dumazet
5051ebd275 ipv4: udp: optimize unicast RX path
We first locate the (local port) hash chain head
If few sockets are in this chain, we proceed with previous lookup algo.

If too many sockets are listed, we take a look at the secondary
(port, address) hash chain we added in previous patch.

We choose the shortest chain and proceed with a RCU lookup on the elected chain.

But, if we chose (port, address) chain, and fail to find a socket on given address,
 we must try another lookup on (port, INADDR_ANY) chain to find socket not bound
to a particular IP.

-> No extra cost for typical setups, where the first lookup will probabbly
be performed.

RCU lookups everywhere, we dont acquire spinlock.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-08 20:53:07 -08:00
Eric Dumazet
512615b6b8 udp: secondary hash on (local port, local address)
Extends udp_table to contain a secondary hash table.

socket anchor for this second hash is free, because UDP
doesnt use skc_bind_node : We define an union to hold
both skc_bind_node & a new hlist_nulls_node udp_portaddr_node

udp_lib_get_port() inserts sockets into second hash chain
(additional cost of one atomic op)

udp_lib_unhash() deletes socket from second hash chain
(additional cost of one atomic op)

Note : No spinlock lockdep annotation is needed, because
lock for the secondary hash chain is always get after
lock for primary hash chain.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-08 20:53:06 -08:00
Eric Dumazet
d4cada4ae1 udp: split sk_hash into two u16 hashes
Union sk_hash with two u16 hashes for udp (no extra memory taken)

One 16 bits hash on (local port) value (the previous udp 'hash')

One 16 bits hash on (local address, local port) values, initialized
but not yet used. This second hash is using jenkin hash for better
distribution.

Because the 'port' is xored later, a partial hash is performed
on local address + net_hash_mix(net)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-08 20:53:05 -08:00
Eric Dumazet
fdcc8aa953 udp: add a counter into udp_hslot
Adds a counter in udp_hslot to keep an accurate count
of sockets present in chain.

This will permit to upcoming UDP lookup algo to chose
the shortest chain when secondary hash is added.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-08 20:53:04 -08:00
David S. Miller
230f9bb701 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/usb/cdc_ether.c

All CDC ethernet devices of type USB_CLASS_COMM need to use
'&mbm_info'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06 00:55:55 -08:00
Eric Dumazet
9d410c7960 net: fix sk_forward_alloc corruption
On UDP sockets, we must call skb_free_datagram() with socket locked,
or risk sk_forward_alloc corruption. This requirement is not respected
in SUNRPC.

Add a convenient helper, skb_free_datagram_locked() and use it in SUNRPC

Reported-by: Francis Moreau <francis.moro@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-30 12:25:12 -07:00
Eric Dumazet
8edf19c2fe net: sk_drops consolidation part 2
- skb_kill_datagram() can increment sk->sk_drops itself, not callers.

- UDP on IPV4 & IPV6 dropped frames (because of bad checksum or policy checks) increment sk_drops

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-18 18:52:54 -07:00
Eric Dumazet
c720c7e838 inet: rename some inet_sock fields
In order to have better cache layouts of struct sock (separate zones
for rx/tx paths), we need this preliminary patch.

Goal is to transfert fields used at lookup time in the first
read-mostly cache line (inside struct sock_common) and move sk_refcnt
to a separate cache line (only written by rx path)

This patch adds inet_ prefix to daddr, rcv_saddr, dport, num, saddr,
sport and id fields. This allows a future patch to define these
fields as macros, like sk_refcnt, without name clashes.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-18 18:52:53 -07:00
Eric Dumazet
766e9037cc net: sk_drops consolidation
sock_queue_rcv_skb() can update sk_drops itself, removing need for
callers to take care of it. This is more consistent since
sock_queue_rcv_skb() also reads sk_drops when queueing a skb.

This adds sk_drops managment to many protocols that not cared yet.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-14 20:40:11 -07:00
David S. Miller
421355de87 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2009-10-13 12:55:20 -07:00
Eric Dumazet
8558467201 udp: Fix udp_poll() and ioctl()
udp_poll() can in some circumstances drop frames with incorrect checksums.

Problem is we now have to lock the socket while dropping frames, or risk
sk_forward corruption.

This bug is present since commit 95766fff6b
([UDP]: Add memory accounting.)

While we are at it, we can correct ioctl(SIOCINQ) to also drop bad frames.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-13 03:16:54 -07:00
Neil Horman
3b885787ea net: Generalize socket rx gap / receive queue overflow cmsg
Create a new socket level option to report number of queue overflows

Recently I augmented the AF_PACKET protocol to report the number of frames lost
on the socket receive queue between any two enqueued frames.  This value was
exported via a SOL_PACKET level cmsg.  AFter I completed that work it was
requested that this feature be generalized so that any datagram oriented socket
could make use of this option.  As such I've created this patch, It creates a
new SOL_SOCKET level option called SO_RXQ_OVFL, which when enabled exports a
SOL_SOCKET level cmsg that reports the nubmer of times the sk_receive_queue
overflowed between any two given frames.  It also augments the AF_PACKET
protocol to take advantage of this new feature (as it previously did not touch
sk->sk_drops, which this patch uses to record the overflow count).  Tested
successfully by me.

Notes:

1) Unlike my previous patch, this patch simply records the sk_drops value, which
is not a number of drops between packets, but rather a total number of drops.
Deltas must be computed in user space.

2) While this patch currently works with datagram oriented protocols, it will
also be accepted by non-datagram oriented protocols. I'm not sure if thats
agreeable to everyone, but my argument in favor of doing so is that, for those
protocols which aren't applicable to this option, sk_drops will always be zero,
and reporting no drops on a receive queue that isn't used for those
non-participating protocols seems reasonable to me.  This also saves us having
to code in a per-protocol opt in mechanism.

3) This applies cleanly to net-next assuming that commit
977750076d (my af packet cmsg patch) is reverted

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12 13:26:31 -07:00