handle_reply() may be called twice on the same request: on ack and then
on commit. This occurs on btrfs-formatted OSDs or if cephfs sync write
path is triggered - CEPH_OSD_FLAG_ACK | CEPH_OSD_FLAG_ONDISK.
handle_reply() handles this with the help of done_request().
Fixes: 5aea3dcd50 ("libceph: a major OSD client update")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For the benefit of every single caller, take osdc instead of map.
Also, now that osdc->osdmap can't ever be NULL, drop the check.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If the NFTA_SET_TABLE parameter is missing and the NLM_F_DUMP flag is
not set, then a NULL pointer dereference is triggered in
nf_tables_set_lookup because ctx.table is NULL.
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
With the commit 48e8aa6e31 ("ipv6: Set FLOWI_FLAG_KNOWN_NH at
flowi6_flags") ip6_pol_route() callers were asked to to set the
FLOWI_FLAG_KNOWN_NH properly and xt_TEE was updated accordingly,
but with the later refactor in commit bbde9fc182 ("netfilter:
factor out packet duplication for IPv4/IPv6") the flowi6_flags
update was lost.
This commit re-add it just before the routing decision.
Fixes: bbde9fc182 ("netfilter: factor out packet duplication for IPv4/IPv6")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
helpers should unregister the only registered ports.
but, helper cannot have correct registered ports value when
failed to register.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
l2tp_ip6 tunnel and session lookups were still using init_net, although
the l2tp core infrastructure already supports lookups keyed by 'net'.
As a result, l2tp_ip6_recv discarded packets for tunnels/sessions
created in namespaces other than the init_net.
Fix, by using dev_net(skb->dev) or sock_net(sk) where appropriate.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a logic error to avoid potential null pointer dereference.
Signed-off-by: Baozeng Ding <sploving1@gmail.com>
Reviewed-by: Stefan Schmidt<stefan@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use %*ph specifier to dump small buffers in hex format instead doing this
byte-by-byte.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A previous patch added the fou6.ko module, but that failed to link
in a couple of configurations:
net/built-in.o: In function `ip6_tnl_encap_add_fou_ops':
net/ipv6/fou6.c:88: undefined reference to `ip6_tnl_encap_add_ops'
net/ipv6/fou6.c:94: undefined reference to `ip6_tnl_encap_add_ops'
net/ipv6/fou6.c:97: undefined reference to `ip6_tnl_encap_del_ops'
net/built-in.o: In function `ip6_tnl_encap_del_fou_ops':
net/ipv6/fou6.c:106: undefined reference to `ip6_tnl_encap_del_ops'
net/ipv6/fou6.c:107: undefined reference to `ip6_tnl_encap_del_ops'
If CONFIG_IPV6=m, ip6_tnl_encap_add_ops/ip6_tnl_encap_del_ops
are in a module, but fou6.c can still be built-in, and that
obviously fails to link.
Also, if CONFIG_IPV6=y, but CONFIG_IPV6_TUNNEL=m or
CONFIG_IPV6_TUNNEL=n, the same problem happens for a different
reason.
This adds two new silent Kconfig symbols to work around both
problems:
- CONFIG_IPV6_FOU is now always set to 'm' if either CONFIG_NET_FOU=m
or CONFIG_IPV6=m
- CONFIG_IPV6_FOU_TUNNEL is set implicitly when IPV6_FOU is enabled
and NET_FOU_IP_TUNNELS is also turned out, and it will ensure
that CONFIG_IPV6_TUNNEL is also available.
The options could be made user-visible as well, to give additional
room for configuration, but it seems easier not to bother users
with more choice here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: aa3463d65e ("fou: Add encap ops for IPv6 tunnels")
Signed-off-by: David S. Miller <davem@davemloft.net>
Most users of IS_ERR_VALUE() in the kernel are wrong, as they
pass an 'int' into a function that takes an 'unsigned long'
argument. This happens to work because the type is sign-extended
on 64-bit architectures before it gets converted into an
unsigned type.
However, anything that passes an 'unsigned short' or 'unsigned int'
argument into IS_ERR_VALUE() is guaranteed to be broken, as are
8-bit integers and types that are wider than 'unsigned long'.
Andrzej Hajda has already fixed a lot of the worst abusers that
were causing actual bugs, but it would be nice to prevent any
users that are not passing 'unsigned long' arguments.
This patch changes all users of IS_ERR_VALUE() that I could find
on 32-bit ARM randconfig builds and x86 allmodconfig. For the
moment, this doesn't change the definition of IS_ERR_VALUE()
because there are probably still architecture specific users
elsewhere.
Almost all the warnings I got are for files that are better off
using 'if (err)' or 'if (err < 0)'.
The only legitimate user I could find that we get a warning for
is the (32-bit only) freescale fman driver, so I did not remove
the IS_ERR_VALUE() there but changed the type to 'unsigned long'.
For 9pfs, I just worked around one user whose calling conventions
are so obscure that I did not dare change the behavior.
I was using this definition for testing:
#define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \
unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO))
which ends up making all 16-bit or wider types work correctly with
the most plausible interpretation of what IS_ERR_VALUE() was supposed
to return according to its users, but also causes a compile-time
warning for any users that do not pass an 'unsigned long' argument.
I suggested this approach earlier this year, but back then we ended
up deciding to just fix the users that are obviously broken. After
the initial warning that caused me to get involved in the discussion
(fs/gfs2/dir.c) showed up again in the mainline kernel, Linus
asked me to send the whole thing again.
[ Updated the 9p parts as per Al Viro - Linus ]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.org/lkml/2016/1/7/363
Link: https://lkml.org/lkml/2016/5/27/486
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull Ceph updates from Sage Weil:
"This changeset has a few main parts:
- Ilya has finished a huge refactoring effort to sync up the
client-side logic in libceph with the user-space client code, which
has evolved significantly over the last couple years, with lots of
additional behaviors (e.g., how requests are handled when cluster
is full and transitions from full to non-full).
This structure of the code is more closely aligned with userspace
now such that it will be much easier to maintain going forward when
behavior changes take place. There are some locking improvements
bundled in as well.
- Zheng adds multi-filesystem support (multiple namespaces within the
same Ceph cluster)
- Zheng has changed the readdir offsets and directory enumeration so
that dentry offsets are hash-based and therefore stable across
directory fragmentation events on the MDS.
- Zheng has a smorgasbord of bug fixes across fs/ceph"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (71 commits)
ceph: fix wake_up_session_cb()
ceph: don't use truncate_pagecache() to invalidate read cache
ceph: SetPageError() for writeback pages if writepages fails
ceph: handle interrupted ceph_writepage()
ceph: make ceph_update_writeable_page() uninterruptible
libceph: make ceph_osdc_wait_request() uninterruptible
ceph: handle -EAGAIN returned by ceph_update_writeable_page()
ceph: make fault/page_mkwrite return VM_FAULT_OOM for -ENOMEM
ceph: block non-fatal signals for fault/page_mkwrite
ceph: make logical calculation functions return bool
ceph: tolerate bad i_size for symlink inode
ceph: improve fragtree change detection
ceph: keep leaf frag when updating fragtree
ceph: fix dir_auth check in ceph_fill_dirfrag()
ceph: don't assume frag tree splits in mds reply are sorted
ceph: fix inode reference leak
ceph: using hash value to compose dentry offset
ceph: don't forbid marking directory complete after forward seek
ceph: record 'offset' for each entry of readdir result
ceph: define 'end/complete' in readdir reply as bit flags
...
Highlights include:
Features:
- Add support for the NFS v4.2 COPY operation
- Add support for NFS/RDMA over IPv6
Bugfixes and cleanups:
- Avoid race that crashes nfs_init_commit()
- Fix oops in callback path
- Fix LOCK/OPEN race when unlinking an open file
- Choose correct stateids when using delegations in setattr, read and write
- Don't send empty SETATTR after OPEN_CREATE
- xprtrdma: Prevent server from writing a reply into memory client has released
- xprtrdma: Support using Read list and Reply chunk in one RPC call
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=QMmY
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.7-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Highlights include:
Features:
- Add support for the NFS v4.2 COPY operation
- Add support for NFS/RDMA over IPv6
Bugfixes and cleanups:
- Avoid race that crashes nfs_init_commit()
- Fix oops in callback path
- Fix LOCK/OPEN race when unlinking an open file
- Choose correct stateids when using delegations in setattr, read and
write
- Don't send empty SETATTR after OPEN_CREATE
- xprtrdma: Prevent server from writing a reply into memory client
has released
- xprtrdma: Support using Read list and Reply chunk in one RPC call"
* tag 'nfs-for-4.7-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (61 commits)
pnfs: pnfs_update_layout needs to consider if strict iomode checking is on
nfs/flexfiles: Use the layout segment for reading unless it a IOMODE_RW and reading is disabled
nfs/flexfiles: Helper function to detect FF_FLAGS_NO_READ_IO
nfs: avoid race that crashes nfs_init_commit
NFS: checking for NULL instead of IS_ERR() in nfs_commit_file()
pnfs: make pnfs_layout_process more robust
pnfs: rework LAYOUTGET retry handling
pnfs: lift retry logic from send_layoutget to pnfs_update_layout
pnfs: fix bad error handling in send_layoutget
flexfiles: add kerneldoc header to nfs4_ff_layout_prepare_ds
flexfiles: remove pointless setting of NFS_LAYOUT_RETURN_REQUESTED
pnfs: only tear down lsegs that precede seqid in LAYOUTRETURN args
pnfs: keep track of the return sequence number in pnfs_layout_hdr
pnfs: record sequence in pnfs_layout_segment when it's created
pnfs: don't merge new ff lsegs with ones that have LAYOUTRETURN bit set
pNFS/flexfiles: When initing reads or writes, we might have to retry connecting to DSes
pNFS/flexfiles: When checking for available DSes, conditionally check for MDS io
pNFS/flexfile: Fix erroneous fall back to read/write through the MDS
NFS: Reclaim writes via writepage are opportunistic
NFSv4: Use the right stateid for delegations in setattr, read and write
...
We have this situation: that EP hash table, contains only the EPs
that are listening, while the transports one, has the opposite.
We have to traverse both to dump all.
But when we traverse the transports one we will also get EPs that are
in the EP hash if they are listening. In this case, the EP is dumped
twice.
We will fix it by checking if the endpoint that is in the endpoint
hash table contains any ep->asoc in there, as it means we will also
find it via transport hash, and thus we can/should skip it, depending
on the filters used, like 'ss -l'.
Still, we should NOT skip it if the user is listing only listening
endpoints, because then we are not traversing the transport hash.
so we have to check idiag_states there also.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ceph_osdc_wait_request() is used when cephfs issues sync IO. In most
cases, the sync IO should be uninterruptible. The fix is use killale
wait function in ceph_osdc_wait_request().
Signed-off-by: Yan, Zheng <zyan@redhat.com>
This patch makes serverl logical caculation functions return bool to
improve readability due to these particular functions only using 0/1
as their return value.
No functional change.
Signed-off-by: Zhang Zhuoyu <zhangzhuoyu@cmss.chinamobile.com>
There is now about a dozen CEPH_OSDMAP_* flags. This is a debugging
interface, so just dump in hex instead of spelling each flag out.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This adds the "map check" infrastructure for sending osdmap version
checks on CALC_TARGET_POOL_DNE and completing in-flight requests with
-ENOENT if the target pool doesn't exist or has just been deleted.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For map check, we are going to need to send CEPH_MSG_MON_GET_VERSION
messages asynchronously and get a callback on completion. Refactor MON
client to allow firing off generic requests asynchronously and add an
async variant of ceph_monc_get_version(). ceph_monc_do_statfs() is
switched over and remains sync.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Implement ceph_osdc_watch_check() to be able to check on status of
watch. Note that the time it takes for a watch/notify event to get
delivered through the notify_wq is taken into account.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Implement ceph_osdc_notify() for sending notifies.
Due to the fact that the current messenger can't do read-in into
pagelists (it can only do write-out from them), I had to go with a page
vector for a NOTIFY_COMPLETE payload, for now.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This adds support and switches rbd to a new, more reliable version of
watch/notify protocol. As with the OSD client update, this is mostly
about getting the right structures linked into the right places so that
reconnects are properly sent when needed. watch/notify v2 also
requires sending regular pings to the OSDs - send_linger_ping().
A major change from the old watch/notify implementation is the
introduction of ceph_osd_linger_request - linger requests no longer
piggy back on ceph_osd_request. ceph_osd_event has been merged into
ceph_osd_linger_request.
All the details are now hidden within libceph, the interface consists
of a simple pair of watch/unwatch functions and ceph_osdc_notify_ack().
ceph_osdc_watch() does return ceph_osd_linger_request, but only to keep
the lifetime management simple.
ceph_osdc_notify_ack() accepts an optional data payload, which is
relayed back to the notifier.
Portions of this patch are loosely based on work by Douglas Fuller
<dfuller@redhat.com> and Mike Christie <michaelc@cs.wisc.edu>.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The unwatch timeout is currently implemented in rbd. With
watch/unwatch code moving into libceph, we are going to need
a ceph_osdc_wait_request() variant with a timeout.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This is a major sync up, up to ~Jewel. The highlights are:
- per-session request trees (vs a global per-client tree)
- per-session locking (vs a global per-client rwlock)
- homeless OSD session
- no ad-hoc global per-client lists
- support for pool quotas
- foundation for watch/notify v2 support
- foundation for map check (pool deletion detection) support
The switchover is incomplete: lingering requests can be setup and
teared down but aren't ever reestablished. This functionality is
restored with the introduction of the new lingering infrastructure
(ceph_osd_linger_request, linger_work, etc) in a later commit.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
OSD client is getting moved from the big per-client lock to a set of
per-session locks. The big rwlock would only be held for read most of
the time, so a global osdc->osd_lru needs additional protection.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
create_osd() is called way too deep in the stack to be able to error
out in a sane way; a failing create_osd() just messes everything up.
The current req_notarget list solution is broken - the list is never
traversed as it's not entirely clear when to do it, I guess.
If we were to start traversing it at regular intervals and retrying
each request, we wouldn't be far off from what __GFP_NOFAIL is doing,
so allocate OSD sessions with __GFP_NOFAIL, at least until we come up
with a better fix.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Separate osdmap handling from decoding and iterating over a bag of maps
in a fresh MOSDMap message. This sets up the scene for the updated OSD
client.
Of particular importance here is the addition of pi->was_full, which
can be used to answer "did this pool go full -> not-full in this map?".
This is the key bit for supporting pool quotas.
We won't be able to downgrade map_sem for much longer, so drop
downgrade_write().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This leads to a simpler osdmap handling code, particularly when dealing
with pi->was_full, which is introduced in a later commit.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Both homeless OSD sessions and watch/notify v2, introduced in later
commits, require periodic ticks which don't depend on ->num_requests.
Schedule the initial tick from ceph_osdc_init() and reschedule from
handle_timeout() unconditionally.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_osdc_stop() isn't called if ceph_osdc_init() fails, so we end up
with handle_osds_timeout() running on invalid memory if any one of the
allocations fails. Call schedule_delayed_work() after everything is
setup, just before returning.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If you specify ACK | ONDISK and set ->r_unsafe_callback, both
->r_callback and ->r_unsafe_callback(true) are called on ack. This is
very confusing. Redo this so that only one of them is called:
->r_unsafe_callback(true), on ack
->r_unsafe_callback(false), on commit
or
->r_callback, on ack|commit
Decode everything in decode_MOSDOpReply() to reduce clutter.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
finish_read(), its only user, uses it to get to hdr.data_len, which is
what ->r_result is set to on success. This gains us the ability to
safely call callbacks from contexts other than reply, e.g. map check.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The crux of this is getting rid of ceph_osdc_build_request(), so that
MOSDOp can be encoded not before but after calc_target() calculates the
actual target. Encoding now happens within ceph_osdc_start_request().
Also nuked is the accompanying bunch of pointers into the encoded
buffer that was used to update fields on each send - instead, the
entire front is re-encoded. If we want to support target->name_len !=
base->name_len in the future, there is no other way, because oid is
surrounded by other fields in the encoded buffer.
Encoding OSD ops and adding data items to the request message were
mixed together in osd_req_encode_op(). While we want to re-encode OSD
ops, we don't want to add duplicate data items to the message when
resending, so all call to ceph_osdc_msg_data_add() are factored out
into a new setup_request_data().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Replace __calc_request_pg() and most of __map_request() with
calc_target() and start using req->r_t.
ceph_osdc_build_request() however still encodes base_oid, because it's
called before calc_target() is and target_oid is empty at that point in
time; a printf in osdc_show() also shows base_oid. This is fixed in
"libceph: switch to calc_target(), part 2".
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Introduce ceph_osd_request_target, containing all mapping-related
fields of ceph_osd_request and calc_target() for calculating mappings
and populating it.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add and decode pi->min_size and pi->last_force_request_resend. These
are going to be used by calc_target().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
calc_target() code is going to need to know how to compare PGs. Take
lhs and rhs pgid by const * while at it.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Rename ceph_calc_pg_primary() to ceph_pg_to_acting_primary() to
emphasise that it returns acting primary.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Knowning just acting set isn't enough, we need to be able to record up
set as well to detect interval changes. This means returning (up[],
up_len, up_primary, acting[], acting_len, acting_primary) and passing
it around. Introduce and switch to ceph_osds to help with that.
Rename ceph_calc_pg_acting() to ceph_pg_to_up_acting_osds() and return
both up and acting sets from it.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Rename ceph_oloc_oid_to_pg() to ceph_object_locator_to_pg(). Emphasise
that returned is raw PG and return -ENOENT instead of -EIO if the pool
doesn't exist.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Given
struct foo {
u64 id;
struct rb_node bar_node;
};
generate insert_bar(), erase_bar() and lookup_bar() functions with
DEFINE_RB_FUNCS(bar, struct foo, id, bar_node)
The key is assumed to be an integer (u64, int, etc), compared with
< and >. nodefld has to be initialized with RB_CLEAR_NODE().
Start using it for MDS, MON and OSD requests and OSD sessions.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently ceph_object_id can hold object names of up to 100
(CEPH_MAX_OID_NAME_LEN) characters. This is enough for all use cases,
expect one - long rbd image names:
- a format 1 header is named "<imgname>.rbd"
- an object that points to a format 2 header is named "rbd_id.<imgname>"
We operate on these potentially long-named objects during rbd map, and,
for format 1 images, during header refresh. (A format 2 header name is
a small system-generated string.)
Lift this 100 character limit by making ceph_object_id be able to point
to an externally-allocated string. Apart from being able to work with
almost arbitrarily-long named objects, this allows us to reduce the
size of ceph_object_id from >100 bytes to 64 bytes.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For a message pool message, preallocate a page, just like we do for
osd_op. For a normal message, take ceph_object_id into account and
don't bother subtracting CEPH_OSD_SLAB_OPS ceph_osd_ops.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The size of ->r_request and ->r_reply messages depends on the size of
the object name (ceph_object_id), while the size of ceph_osd_request is
fixed. Move message allocation into a separate function that would
have to be called after ceph_object_id and ceph_object_locator (which
is also going to become variable in size with RADOS namespaces) have
been filled in:
req = ceph_osdc_alloc_request(...);
<fill in req->r_base_oid>
<fill in req->r_base_oloc>
ceph_osdc_alloc_messages(req);
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_osdc_build_request() is going away. Grab snapc and initialize
->r_snapid in ceph_osdc_alloc_request().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When hwbm_pool_add exited in error the spinlock was not released. This
patch fixes this issue.
Fixes: 8cb2d8bf57 ("net: add a hardware buffer management helper API")
Reported-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before calling the nla_parse_nested function, make sure the pointer to the
attribute is not null. This patch fixes several potential null pointer
dereference vulnerabilities in the tipc netlink functions.
Signed-off-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Weber reported:
> Under full load (unshare() in loop -> OOM conditions) we can
> get kernel panic:
>
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
> IP: [<ffffffff81476c85>] nfqnl_nf_hook_drop+0x35/0x70
> [..]
> task: ffff88012dfa3840 ti: ffff88012dffc000 task.ti: ffff88012dffc000
> RIP: 0010:[<ffffffff81476c85>] [<ffffffff81476c85>] nfqnl_nf_hook_drop+0x35/0x70
> RSP: 0000:ffff88012dfffd80 EFLAGS: 00010206
> RAX: 0000000000000008 RBX: ffffffff81add0c0 RCX: ffff88013fd80000
> [..]
> Call Trace:
> [<ffffffff81474d98>] nf_queue_nf_hook_drop+0x18/0x20
> [<ffffffff814738eb>] nf_unregister_net_hook+0xdb/0x150
> [<ffffffff8147398f>] netfilter_net_exit+0x2f/0x60
> [<ffffffff8141b088>] ops_exit_list.isra.4+0x38/0x60
> [<ffffffff8141b652>] setup_net+0xc2/0x120
> [<ffffffff8141bd09>] copy_net_ns+0x79/0x120
> [<ffffffff8106965b>] create_new_namespaces+0x11b/0x1e0
> [<ffffffff810698a7>] unshare_nsproxy_namespaces+0x57/0xa0
> [<ffffffff8104baa2>] SyS_unshare+0x1b2/0x340
> [<ffffffff81608276>] entry_SYSCALL_64_fastpath+0x1e/0xa8
> Code: 65 00 48 89 e5 41 56 41 55 41 54 53 83 e8 01 48 8b 97 70 12 00 00 48 98 49 89 f4 4c 8b 74 c2 18 4d 8d 6e 08 49 81 c6 88 00 00 00 <49> 8b 5d 00 48 85 db 74 1a 48 89 df 4c 89 e2 48 c7 c6 90 68 47
>
The simple fix for this requires a new pernet variable for struct
nf_queue that indicates when it is safe to use the dynamically
allocated nf_queue state.
As we need a variable anyway make nf_register_queue_handler and
nf_unregister_queue_handler pernet. This allows the existing logic of
when it is safe to use the state from the nfnetlink_queue module to be
reused with no changes except for making it per net.
The syncrhonize_rcu from nf_unregister_queue_handler is moved to a new
function nfnl_queue_net_exit_batch so that the worst case of having a
syncrhonize_rcu in the pernet exit path is not experienced in batch
mode.
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Policer was not dumping or updating timestamps
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I found a serious performance bug in packet schedulers using hrtimers.
sch_htb and sch_fq are definitely impacted by this problem.
We constantly rearm high resolution timers if some packets are throttled
in one (or more) class, and other packets are flying through qdisc on
another (non throttled) class.
hrtimer_start() does not have the mod_timer() trick of doing nothing if
expires value does not change :
if (timer_pending(timer) &&
timer->expires == expires)
return 1;
This issue is particularly visible when multiple cpus can queue/dequeue
packets on the same qdisc, as hrtimer code has to lock a remote base.
I used following fix :
1) Change htb to use qdisc_watchdog_schedule_ns() instead of open-coding
it.
2) Cache watchdog prior expiration. hrtimer might provide this, but I
prefer to not rely on some hrtimer internal.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=k6RP
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.7' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"A very quiet cycle for nfsd, mainly just an RDMA update from Chuck
Lever"
* tag 'nfsd-4.7' of git://linux-nfs.org/~bfields/linux:
sunrpc: fix stripping of padded MIC tokens
svcrpc: autoload rdma module
svcrdma: Generalize svc_rdma_xdr_decode_req()
svcrdma: Eliminate code duplication in svc_rdma_recvfrom()
svcrdma: Drain QP before freeing svcrdma_xprt
svcrdma: Post Receives only for forward channel requests
svcrdma: Remove superfluous line from rdma_read_chunks()
svcrdma: svc_rdma_put_context() is invoked twice in Send error path
svcrdma: Do not add XDR padding to xdr_buf page vector
svcrdma: Support IPv6 with NFS/RDMA
nfsd: handle seqid wraparound in nfsd4_preprocess_layout_stateid
Remove unnecessary allocation
In gre6 xmit path, we are sending a GRE packet, so set fl6 proto
to IPPROTO_GRE properly.
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When creat an ip6gretap interface with an unreachable route,
the MTU is about 14 bytes larger than what was needed.
If the remote address is reachable:
ping6 2001:0:130::1 -c 2
PING 2001:0:130::1(2001:0:130::1) 56 data bytes
64 bytes from 2001:0:130::1: icmp_seq=1 ttl=64 time=1.46 ms
64 bytes from 2001:0:130::1: icmp_seq=2 ttl=64 time=81.1 ms
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit fa50d974d1 ("ipv4: Namespaceify ip_default_ttl sysctl knob")
moves the default TTL assignment, and as side-effect IPv4 TTL now
has a default value only if sysctl support is enabled (CONFIG_SYSCTL=y).
The sysctl_ip_default_ttl is fundamental for IP to work properly,
as it provides the TTL to be used as default. The defautl TTL may be
used in ip_selected_ttl, through the following flow:
ip_select_ttl
ip4_dst_hoplimit
net->ipv4.sysctl_ip_default_ttl
This commit fixes the issue by assigning net->ipv4.sysctl_ip_default_ttl
in net_init_net, called during ipv4's initialization.
Without this commit, a kernel built without sysctl support will send
all IP packets with zero TTL (unless a TTL is explicitly set, e.g.
with setsockopt).
Given a similar issue might appear on the other knobs that were
namespaceify, this commit also moves them.
Fixes: fa50d974d1 ("ipv4: Namespaceify ip_default_ttl sysctl knob")
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sk_err and sk_err_soft fields are positive errno values and
userspace applications rely on this when using getsockopt(SO_ERROR).
ATM code places an -errno into sk_err_soft in sigd_send() and returns it
from svc_addparty()/svc_dropparty().
Although I am not familiar with ATM code I came to this conclusion
because:
1. sigd_send() msg->type cases as_okay and as_error both have:
sk->sk_err = -msg->reply;
while the as_addparty and as_dropparty cases have:
sk->sk_err_soft = msg->reply;
This is the source of the inconsistency.
2. svc_addparty() returns an -errno and assumes sk_err_soft is also an
-errno:
if (flags & O_NONBLOCK) {
error = -EINPROGRESS;
goto out;
}
...
error = xchg(&sk->sk_err_soft, 0);
out:
release_sock(sk);
return error;
This shows that sk_err_soft is indeed being treated as an -errno.
This patch ensures that sk_err_soft is always a positive errno.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The length of the GSS MIC token need not be a multiple of four bytes.
It is then padded by XDR to a multiple of 4 B, but unwrap_integ_data()
would previously only trim mic.len + 4 B. The remaining up to three
bytes would then trigger a check in nfs4svc_decode_compoundargs(),
leading to a "garbage args" error and mount failure:
nfs4svc_decode_compoundargs: compound not properly padded!
nfsd: failed to decode arguments!
This would prevent older clients using the pre-RFC 4121 MIC format
(37-byte MIC including a 9-byte OID) from mounting exports from v3.9+
servers using krb5i.
The trimming was introduced by commit 4c190e2f91 ("sunrpc: trim off
trailing checksum before returning decrypted or integrity authenticated
buffer").
Fixes: 4c190e2f91 "unrpc: trim off trailing checksum..."
Signed-off-by: Tomáš Trnka <ttrnka@mail.muni.cz>
Cc: stable@vger.kernel.org
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This should fix failures like:
# rpc.nfsd --rdma
rpc.nfsd: Unable to request RDMA services: Protocol not supported
Reported-by: Steve Dickson <steved@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Here's the large TTY and Serial driver update for 4.7-rc1.
A few new serial drivers are added here, and Peter has fixed a bunch of
long-standing bugs in the tty layer and serial drivers as normal. Full
details in the shortlog.
All of these have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlc/0/oACgkQMUfUDdst+ynzyQCgsa54VNijdAzU6AA5HEfqmf2M
cGMAn1boH7hUWlAbJmzzihx4JASoGjYW
=V5VH
-----END PGP SIGNATURE-----
Merge tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver updates from Greg KH:
"Here's the large TTY and Serial driver update for 4.7-rc1.
A few new serial drivers are added here, and Peter has fixed a bunch
of long-standing bugs in the tty layer and serial drivers as normal.
Full details in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (88 commits)
MAINTAINERS: 8250: remove website reference
serial: core: Fix port mutex assert if lockdep disabled
serial: 8250_dw: fix wrong logic in dw8250_check_lcr()
tty: vt, finish looping on duplicate
tty: vt, return error when con_startup fails
QE-UART: add "fsl,t1040-ucc-uart" to of_device_id
serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios
serial: 8250dw: Add device HID for future AMD UART controller
Fix OpenSSH pty regression on close
serial: mctrl_gpio: add IRQ locking
serial: 8250: Integrate Fintek into 8250_base
serial: mps2-uart: add support for early console
serial: mps2-uart: add MPS2 UART driver
dt-bindings: document the MPS2 UART bindings
serial: sirf: Use generic uart-has-rtscts DT property
serial: sirf: Introduce helper variable struct device_node *np
serial: mxs-auart: Use generic uart-has-rtscts DT property
serial: imx: Use generic uart-has-rtscts DT property
doc: DT: Add Generic Serial Device Tree Bindings
serial: 8250: of: Make tegra_serial_handle_break() static
...
Pull networking fixes and more updates from David Miller:
1) Tunneling fixes from Tom Herbert and Alexander Duyck.
2) AF_UNIX updates some struct sock bit fields with the socket lock,
whereas setsockopt() sets overlapping ones with locking. Seperate
out the synchronized vs. the AF_UNIX unsynchronized ones to avoid
corruption. From Andrey Ryabinin.
3) Mount BPF filesystem with mount_nodev rather than mount_ns, from
Eric Biederman.
4) A couple kmemdup conversions, from Muhammad Falak R Wani.
5) BPF verifier fixes from Alexei Starovoitov.
6) Don't let tunneled UDP packets get stuck in socket queues, if
something goes wrong during the encapsulation just drop the packet
rather than signalling an error up the call stack. From Hannes
Frederic Sowa.
7) SKB ref after free in batman-adv, from Florian Westphal.
8) TCP iSCSI, ocfs2, rds, and tipc have to disable BH in it's TCP
callbacks since the TCP stack runs pre-emptibly now. From Eric
Dumazet.
9) Fix crash in fixed_phy_add, from Rabin Vincent.
10) Fix length checks in xen-netback, from Paul Durrant.
11) Fix mixup in KEY vs KEYID macsec attributes, from Sabrina Dubroca.
12) RDS connection spamming bug fixes from Sowmini Varadhan
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (152 commits)
net: suppress warnings on dev_alloc_skb
uapi glibc compat: fix compilation when !__USE_MISC in glibc
udp: prevent skbs lingering in tunnel socket queues
bpf: teach verifier to recognize imm += ptr pattern
bpf: support decreasing order in direct packet access
net: usb: ch9200: use kmemdup
ps3_gelic: use kmemdup
net:liquidio: use kmemdup
bpf: Use mount_nodev not mount_ns to mount the bpf filesystem
net: cdc_ncm: update datagram size after changing mtu
tuntap: correctly wake up process during uninit
intel: Add support for IPv6 IP-in-IP offload
ip6_gre: Do not allow segmentation offloads GRE_CSUM is enabled with FOU/GUE
RDS: TCP: Avoid rds connection churn from rogue SYNs
RDS: TCP: rds_tcp_accept_worker() must exit gracefully when terminating rds-tcp
net: sock: move ->sk_shutdown out of bitfields.
ipv6: Don't reset inner headers in ip6_tnl_xmit
ip4ip6: Support for GSO/GRO
ip6ip6: Support for GSO/GRO
ipv6: Set features for IPv6 tunnels
...
In case we find a socket with encapsulation enabled we should call
the encap_recv function even if just a udp header without payload is
available. The callbacks are responsible for correctly verifying and
dropping the packets.
Also, in case the header validation fails for geneve and vxlan we
shouldn't put the skb back into the socket queue, no one will pick
them up there. Instead we can simply discard them in the respective
encap_recv functions.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch addresses the same issue we had for IPv4 where enabling GRE with
an inner checksum cannot be supported with FOU/GUE due to the fact that
they will jump past the GRE header at it is treated like a tunnel header.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a rogue SYN is received after the connection arbitration
algorithm has converged, the incoming SYN should not needlessly
quiesce the transmit path, and it should not result in needless
TCP connection resets due to re-execution of the connection
arbitration logic.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two instances where we want to terminate RDS-TCP: when
exiting the netns or during module unload. In either case, the
termination sequence is to stop the listen socket, mark the
rtn->rds_tcp_listen_sock as null, and flush any accept workqs.
Thus any workqs that get flushed at this point will encounter a
null rds_tcp_listen_sock, and must exit gracefully to allow
the RDS-TCP termination to complete successfully.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since iptunnel_handle_offloads() is called in all paths we can
probably drop the block in ip6_tnl_xmit that was checking for
skb->encapsulation and resetting the inner headers.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Need to set dev features, use same values that are used in GREv6.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch add a new fou6 module that provides encapsulation
operations for IPv6.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add encap_hlen and ip_tunnel_encap structure to ip6_tnl. Add functions
for getting encap hlen, setting up encap on a tunnel, performing
encapsulation operation.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds receive path support for IPv6 with fou.
- Add address family to fou structure for open sockets. This supports
AF_INET and AF_INET6. Lookups for fou ports are performed on both the
port number and family.
- In fou and gue receive adjust tot_len in IPv4 header or payload_len
based on address family.
- Allow AF_INET6 in FOU_ATTR_AF netlink attribute.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create __fou_build_header and __gue_build_header. These implement the
protocol generic parts of building the fou and gue header.
fou_build_header and gue_build_header implement the IPv4 specific
functions and call the __*_build_header functions.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use helper function to set up UDP tunnel related information for a fou
socket.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Consolidate all the ip_tunnel_encap definitions in one spot in the
header file. Also, move ip_encap_hlen and ip_tunnel_encap from
ip_tunnel.c to ip_tunnels.h so they call be called without a dependency
on ip_tunnel module. Similarly, move iptun_encaps to ip_tunnel_core.c.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When performing foo-over-UDP, UDP packets are processed by the
encapsulation handler which returns another protocol to process.
This may result in processing two (or more) protocols in the
loop that are marked as INET6_PROTO_FINAL. The actions taken
for hitting a final protocol, in particular the skb_postpull_rcsum
can only be performed once.
This patch set adds a check of a final protocol has been seen. The
rules are:
- If the final protocol has not been seen any protocol is processed
(final and non-final). In the case of a final protocol, the final
actions are taken (like the skb_postpull_rcsum)
- If a final protocol has been seen (e.g. an encapsulating UDP
header) then no further non-final protocols are allowed
(e.g. extension headers). For more final protocols the
final actions are not taken (e.g. skb_postpull_rcsum).
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In ip6_input_finish the nexthdr protocol is retrieved from the
next header offset that is returned in the cb of the skb.
This method does not work for UDP encapsulation that may not
even have a concept of a nexthdr field (e.g. FOU).
This patch checks for a final protocol (INET6_PROTO_FINAL) when a
protocol handler returns > 0. If the protocol is not final then
resubmission is performed on nhoff value. If the protocol is final
then the nexthdr is taken to be the return value.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch defines two new GSO definitions SKB_GSO_IPXIP4 and
SKB_GSO_IPXIP6 along with corresponding NETIF_F_GSO_IPXIP4 and
NETIF_F_GSO_IPXIP6. These are used to described IP in IP
tunnel and what the outer protocol is. The inner protocol
can be deduced from other GSO types (e.g. SKB_GSO_TCPV4 and
SKB_GSO_TCPV6). The GSO types of SKB_GSO_IPIP and SKB_GSO_SIT
are removed (these are both instances of SKB_GSO_IPXIP4).
SKB_GSO_IPXIP6 will be used when support for GSO with IP
encapsulation over IPv6 is added.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In several gso_segment functions there are checks of gso_type against
a seemingly arbitrary list of SKB_GSO_* flags. This seems like an
attempt to identify unsupported GSO types, but since the stack is
the one that set these GSO types in the first place this seems
unnecessary to do. If a combination isn't valid in the first
place that stack should not allow setting it.
This is a code simplication especially for add new GSO types.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Updates to the new Intel X722 iWARP driver
- Updates to the hfi1 driver
- Fixes for the iw_cxgb4 driver
- Misc core fixes
- Generic RDMA READ/WRITE API addition
- SRP updates
- Misc ipoib updates
- Minor mlx5 updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=e+Zv
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"Primary 4.7 merge window changes
- Updates to the new Intel X722 iWARP driver
- Updates to the hfi1 driver
- Fixes for the iw_cxgb4 driver
- Misc core fixes
- Generic RDMA READ/WRITE API addition
- SRP updates
- Misc ipoib updates
- Minor mlx5 updates"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (148 commits)
IB/mlx5: Fire the CQ completion handler from tasklet
net/mlx5_core: Use tasklet for user-space CQ completion events
IB/core: Do not require CAP_NET_ADMIN for packet sniffing
IB/mlx4: Fix unaligned access in send_reply_to_slave
IB/mlx5: Report Scatter FCS device capability when supported
IB/mlx5: Add Scatter FCS support for Raw Packet QP
IB/core: Add Scatter FCS create flag
IB/core: Add Raw Scatter FCS device capability
IB/core: Add extended device capability flags
i40iw: pass hw_stats by reference rather than by value
i40iw: Remove unnecessary synchronize_irq() before free_irq()
i40iw: constify i40iw_vf_cqp_ops structure
IB/mlx5: Add UARs write-combining and non-cached mapping
IB/mlx5: Allow mapping the free running counter on PROT_EXEC
IB/mlx4: Use list_for_each_entry_safe
IB/SA: Use correct free function
IB/core: Fix a potential array overrun in CMA and SA agent
IB/core: Remove unnecessary check in ibnl_rcv_msg
IB/IWPM: Fix a potential skb leak
RDMA/nes: replace custom print_hex_dump()
...
Merge updates from Andrew Morton:
- fsnotify fix
- poll() timeout fix
- a few scripts/ tweaks
- debugobjects updates
- the (small) ocfs2 queue
- Minor fixes to kernel/padata.c
- Maybe half of the MM queue
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (117 commits)
mm, page_alloc: restore the original nodemask if the fast path allocation failed
mm, page_alloc: uninline the bad page part of check_new_page()
mm, page_alloc: don't duplicate code in free_pcp_prepare
mm, page_alloc: defer debugging checks of pages allocated from the PCP
mm, page_alloc: defer debugging checks of freed pages until a PCP drain
cpuset: use static key better and convert to new API
mm, page_alloc: inline pageblock lookup in page free fast paths
mm, page_alloc: remove unnecessary variable from free_pcppages_bulk
mm, page_alloc: pull out side effects from free_pages_check
mm, page_alloc: un-inline the bad part of free_pages_check
mm, page_alloc: check multiple page fields with a single branch
mm, page_alloc: remove field from alloc_context
mm, page_alloc: avoid looking up the first zone in a zonelist twice
mm, page_alloc: shortcut watermark checks for order-0 pages
mm, page_alloc: reduce cost of fair zone allocation policy retry
mm, page_alloc: shorten the page allocator fast path
mm, page_alloc: check once if a zone has isolated pageblocks
mm, page_alloc: move __GFP_HARDWALL modifications out of the fastpath
mm, page_alloc: simplify last cpupid reset
mm, page_alloc: remove unnecessary initialisation from __alloc_pages_nodemask()
...
page_reference manipulation functions are introduced to track down
reference count change of the page. Use it instead of direct
modification of _count.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Sunil Goutham <sgoutham@cavium.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
struct timespec is not y2038 safe. Even though timespec might be
sufficient to represent timeouts, use struct timespec64 here as the plan
is to get rid of all timespec reference in the kernel.
The patch transitions the common functions: poll_select_set_timeout()
and select_estimate_accuracy() to use timespec64. And, all the syscalls
that use these functions are transitioned in the same patch.
The restart block parameters for poll uses monotonic time. Use
timespec64 here as well to assign timeout value. This parameter in the
restart block need not change because this only holds the monotonic
timestamp at which timeout should occur. And, unsigned long data type
should be big enough for this timestamp.
The system call interfaces will be handled in a separate series.
Compat interfaces need not change as timespec64 is an alias to struct
timespec on a 64 bit system.
Link: http://lkml.kernel.org/r/1461947989-21926-3-git-send-email-deepa.kernel@gmail.com
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
May, we managed to uncover and fix some important bugs in our
new B.A.T.M.A.N. V algorithm. These are the fixes we came up with
together with others that I collected in the past weeks:
- avoid potential crash due to NULL pointer dereference in
B.A.T.M.A.N. V routine when a neigh_ifinfo object is not found, by
Sven Eckelmann
- avoid use-after-free of skb when counting outgoing bytes, by Florian
Westphal
- fix neigh_ifinfo object reference counting imbalance when using
B.A.T.M.A.N. V, by Sven Eckelmann. Such imbalance may lead to the
impossibility of releasing the related netdev object on shutdown
- avoid invalid memory access in case of error while allocating
bcast_own_sum when a new hard-interface is added, by Sven Eckelmann
- ensure originator address is updated in OMG/ELP packet content upon
primary interface address change, by Antonio Quartulli
- fix integer overflow when computing TQ metric (B.A.T.M.A.N. IV), by
Sven Eckelmann
- avoid race condition while adding new neigh_node which would result
in having two objects mapping to the same physical neighbour, by
Linus Lüssing
- ensure originator address is initialized in ELP packet content on
secondary interfaces, by Marek Lindner
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJXO+ZsAAoJEJ4aZjxxc6bK7UEQALxcPqv2YtQhQCexHAPlmTxg
73uXuXpo0eWPxJh2FElcsHTHSt/l0/m/G8MEWCOfqI8MTeg+UTY5lXCY4iThtiY6
n08nl/CLkPNLuDGzAd7CpCM2jJ1iAzgJEVpUGQ6qoO5ekFvO09U/J/o6E8gDTX4I
yc1kR3hcJeLbF6EUXEfTX/2THdFhkYSgHgZoGyM3eu43Zhv/6v454iEpqNxA/Ubr
UngJTGSfqf20FidUt+xjbfptltTzj25Cp+VQ2DQ/LOuit0ChECjXwMfk0UkDHlKX
bYPm1tcUJ0dzbR7cILMlzzzCSzH00leUk5GYYo59rAxBQiJ2j+92c2K0dcnv8cJJ
q+GsZapyQFBIgPWS/TLtG1II3u8YWYvl+nEQXBDtPeRAjGoO4VwSbuatsf+enM8K
i0c622iEc0b3cVe5H8reUh7SZMfMT/cQkEgpX5/psf8FWvEzeDv4HI3aUfVuSpck
mEZAy59HeLWrF+KTScougv14vyoMmKfUcr5E1Oe4X1Ke9dpVvHGiI9wlqb/J0lfl
rIc/5WI3ae/QAXkcPybanPEO8O0pBMP+Y4oCYpWmDu1qYfwZzDaSMqqEALQVVW2I
8Ta1gbzamgZDslf7YDSWOR0iyFAFcnMhT0qU6gv2+RGbcfwD+AGRLu5ufY/th0N3
L6AuFhvT/bxW6jN+iuAS
=IACg
-----END PGP SIGNATURE-----
Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-merge
Antonio Quartulli says:
====================
During the Wireless Battle Mesh v9 in Porto (PT) at the beginning of
May, we managed to uncover and fix some important bugs in our
new B.A.T.M.A.N. V algorithm. These are the fixes we came up with
together with others that I collected in the past weeks:
- avoid potential crash due to NULL pointer dereference in
B.A.T.M.A.N. V routine when a neigh_ifinfo object is not found, by
Sven Eckelmann
- avoid use-after-free of skb when counting outgoing bytes, by Florian
Westphal
- fix neigh_ifinfo object reference counting imbalance when using
B.A.T.M.A.N. V, by Sven Eckelmann. Such imbalance may lead to the
impossibility of releasing the related netdev object on shutdown
- avoid invalid memory access in case of error while allocating
bcast_own_sum when a new hard-interface is added, by Sven Eckelmann
- ensure originator address is updated in OMG/ELP packet content upon
primary interface address change, by Antonio Quartulli
- fix integer overflow when computing TQ metric (B.A.T.M.A.N. IV), by
Sven Eckelmann
- avoid race condition while adding new neigh_node which would result
in having two objects mapping to the same physical neighbour, by
Linus Lüssing
- ensure originator address is initialized in ELP packet content on
secondary interfaces, by Marek Lindner
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP stack can now run from process context.
Use read_lock_bh(&sk->sk_callback_lock) variant to restore previous
assumption.
Fixes: 5413d1babe ("net: do not block BH while processing socket backlog")
Fixes: d41a69f1d3 ("tcp: make tcp_sendmsg() aware of socket backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP stack can now run from process context.
Use read_lock_bh(&sk->sk_callback_lock) variant to restore previous
assumption.
Fixes: 5413d1babe ("net: do not block BH while processing socket backlog")
Fixes: d41a69f1d3 ("tcp: make tcp_sendmsg() aware of socket backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_splice_bits() returns int, kcm_splice_read() returns ssize_t,
both are signed.
We may need another patch to make them all ssize_t, but that
deserves a separated patch.
Fixes: 91687355b9 ("kcm: Splice support")
Reported-by: David Binderman <linuxdev.baldrick@gmail.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull security subsystem updates from James Morris:
"Highlights:
- A new LSM, "LoadPin", from Kees Cook is added, which allows forcing
of modules and firmware to be loaded from a specific device (this
is from ChromeOS, where the device as a whole is verified
cryptographically via dm-verity).
This is disabled by default but can be configured to be enabled by
default (don't do this if you don't know what you're doing).
- Keys: allow authentication data to be stored in an asymmetric key.
Lots of general fixes and updates.
- SELinux: add restrictions for loading of kernel modules via
finit_module(). Distinguish non-init user namespace capability
checks. Apply execstack check on thread stacks"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (48 commits)
LSM: LoadPin: provide enablement CONFIG
Yama: use atomic allocations when reporting
seccomp: Fix comment typo
ima: add support for creating files using the mknodat syscall
ima: fix ima_inode_post_setattr
vfs: forbid write access when reading a file into memory
fs: fix over-zealous use of "const"
selinux: apply execstack check on thread stacks
selinux: distinguish non-init user namespace capability checks
LSM: LoadPin for kernel file loading restrictions
fs: define a string representation of the kernel_read_file_id enumeration
Yama: consolidate error reporting
string_helpers: add kstrdup_quotable_file
string_helpers: add kstrdup_quotable_cmdline
string_helpers: add kstrdup_quotable
selinux: check ss_initialized before revalidating an inode label
selinux: delay inode label lookup as long as possible
selinux: don't revalidate an inode's label when explicitly setting it
selinux: Change bool variable name to index.
KEYS: Add KEYCTL_DH_COMPUTE command
...
This fix prevents nodes to wrongly create a 00:00:00:00:00:00 originator
which can potentially interfere with the rest of the neighbor statistics.
Fixes: d6f94d91f7 ("batman-adv: ELP - adding basic infrastructure")
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
The undefined behavior sanatizer detected an signed integer overflow in a
setup with near perfect link quality
UBSAN: Undefined behaviour in net/batman-adv/bat_iv_ogm.c:1246:25
signed integer overflow:
8713350 * 255 cannot be represented in type 'int'
The problems happens because the calculation of mixed unsigned and signed
integers resulted in an integer multiplication.
batadv_ogm_packet::tq (u8 255)
* tq_own (u8 255)
* tq_asym_penalty (int 134; max 255)
* tq_iface_penalty (int 255; max 255)
The tq_iface_penalty, tq_asym_penalty and inv_asym_penalty can just be
changed to unsigned int because they are not expected to become negative.
Fixes: c039876892 ("batman-adv: add WiFi penalty")
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
When the MAC address of the primary interface is changed,
update the originator address in the ELP and OGM skb buffers as
well in order to reflect the change.
Fixes: d6f94d91f7 ("batman-adv: ELP - adding basic infrastructure")
Reported-by: Marek Lindner <marek@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
The function batadv_iv_ogm_orig_add_if allocates new buffers for bcast_own
and bcast_own_sum. It is expected that these buffers are unchanged in case
either bcast_own or bcast_own_sum couldn't be resized.
But the error handling of this function frees the already resized buffer
for bcast_own when the allocation of the new bcast_own_sum buffer failed.
This will lead to an invalid memory access when some code will try to
access bcast_own.
Instead the resized new bcast_own buffer has to be kept. This will not lead
to problems because the size of the buffer was only increased and therefore
no user of the buffer will try to access bytes outside of the new buffer.
Fixes: d0015fdd3d ("batman-adv: provide orig_node routing API")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
The functions batadv_neigh_ifinfo_get increase the reference counter of the
batadv_neigh_ifinfo. These have to be reduced again when the reference is
not used anymore to correctly free the objects.
Fixes: 9786906022 ("batman-adv: B.A.T.M.A.N. V - implement neighbor comparison API calls")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batadv_neigh_ifinfo_get can return NULL when it cannot find (even when only
temporarily) anymore the neigh_ifinfo in the list neigh->ifinfo_list. This
has to be checked to avoid kernel Oopses when the ifinfo is dereferenced.
This a situation which isn't expected but is already handled by functions
like batadv_v_neigh_cmp. The same kind of warning is therefore used before
the function returns without dereferencing the pointers.
Fixes: 9786906022 ("batman-adv: B.A.T.M.A.N. V - implement neighbor comparison API calls")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
batadv_send_skb_to_orig() calls dev_queue_xmit() so we can't use skb->len.
Fixes: 953324776d ("batman-adv: network coding - buffer unicast packets before forward")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Pull networking updates from David Miller:
"Highlights:
1) Support SPI based w5100 devices, from Akinobu Mita.
2) Partial Segmentation Offload, from Alexander Duyck.
3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.
4) Allow cls_flower stats offload, from Amir Vadai.
5) Implement bpf blinding, from Daniel Borkmann.
6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
actually using FASYNC these atomics are superfluous. From Eric
Dumazet.
7) Run TCP more preemptibly, also from Eric Dumazet.
8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
driver, from Gal Pressman.
9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.
10) Improve BPF usage documentation, from Jesper Dangaard Brouer.
11) Support tunneling offloads in qed, from Manish Chopra.
12) aRFS offloading in mlx5e, from Maor Gottlieb.
13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
Leitner.
14) Add MSG_EOR support to TCP, this allows controlling packet
coalescing on application record boundaries for more accurate
socket timestamp sampling. From Martin KaFai Lau.
15) Fix alignment of 64-bit netlink attributes across the board, from
Nicolas Dichtel.
16) Per-vlan stats in bridging, from Nikolay Aleksandrov.
17) Several conversions of drivers to ethtool ksettings, from Philippe
Reynes.
18) Checksum neutral ILA in ipv6, from Tom Herbert.
19) Factorize all of the various marvell dsa drivers into one, from
Vivien Didelot
20) Add VF support to qed driver, from Yuval Mintz"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
Revert "phy dp83867: Make rgmii parameters optional"
r8169: default to 64-bit DMA on recent PCIe chips
phy dp83867: Make rgmii parameters optional
phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
bpf: arm64: remove callee-save registers use for tmp registers
asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
switchdev: pass pointer to fib_info instead of copy
net_sched: close another race condition in tcf_mirred_release()
tipc: fix nametable publication field in nl compat
drivers: net: Don't print unpopulated net_device name
qed: add support for dcbx.
ravb: Add missing free_irq() calls to ravb_close()
qed: Remove a stray tab
net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
net: ethernet: fec-mpc52xx: use phydev from struct net_device
bpf, doc: fix typo on bpf_asm descriptions
stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
net: ethernet: fs-enet: use phydev from struct net_device
...
Pull 'struct path' constification update from Al Viro:
"'struct path' is passed by reference to a bunch of Linux security
methods; in theory, there's nothing to stop them from modifying the
damn thing and LSM community being what it is, sooner or later some
enterprising soul is going to decide that it's a good idea.
Let's remove the temptation and constify all of those..."
* 'work.const-path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
constify ima_d_path()
constify security_sb_pivotroot()
constify security_path_chroot()
constify security_path_{link,rename}
apparmor: remove useless checks for NULL ->mnt
constify security_path_{mkdir,mknod,symlink}
constify security_path_{unlink,rmdir}
apparmor: constify common_perm_...()
apparmor: constify aa_path_link()
apparmor: new helper - common_path_perm()
constify chmod_common/security_path_chmod
constify security_sb_mount()
constify chown_common/security_path_chown
tomoyo: constify assorted struct path *
apparmor_path_truncate(): path->mnt is never NULL
constify vfs_truncate()
constify security_path_truncate()
[apparmor] constify struct path * in a bunch of helpers
Clean up.
After "xprtrdma: Remove ro_unmap() from all registration modes",
there are no longer any sites that take rpcrdma_ia::qplock for read.
The one site that takes it for write is always single-threaded. It
is safe to remove it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In a cluster failover scenario, it is desirable for the client to
attempt to reconnect quickly, as an alternate NFS server is already
waiting to take over for the down server. The client can't see that
a server IP address has moved to a new server until the existing
connection is gone.
For fabrics and devices where it is meaningful, set a definite upper
bound on the amount of time before it is determined that a
connection is no longer valid. This allows the RPC client to detect
connection loss in a timely matter, then perform a fresh resolution
of the server GUID in case it has changed (cluster failover).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: The ro_unmap method is no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There needs to be a safe method of releasing registered memory
resources when an RPC terminates. Safe can mean a number of things:
+ Doesn't have to sleep
+ Doesn't rely on having a QP in RTS
ro_unmap_safe will be that safe method. It can be used in cases
where synchronous memory invalidation can deadlock, or needs to have
an active QP.
The important case is fencing an RPC's memory regions after it is
signaled (^C) and before it exits. If this is not done, there is a
window where the server can write an RPC reply into memory that the
client has released and re-used for some other purpose.
Note that this is a full solution for FRWR, but FMR and physical
still have some gaps where a particularly bad server can wreak
some havoc on the client. These gaps are not made worse by this
patch and are expected to be exceptionally rare and timing-based.
They are noted in documenting comments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Separate the DMA unmap operation from freeing the MW. In a
subsequent patch they will not always be done at the same time,
and they are not related operations (except by order; freeing
the MW must be the last step during invalidation).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In a subsequent patch, the fr_xprt and fr_worker fields will be
needed by another memory registration mode. Move them into the
generic rpcrdma_mw structure that wraps struct rpcrdma_frmr.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Maintain the order of invalidation and DMA unmapping when doing
a background MR reset.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
frwr_op_unmap_sync() is now invoked in a workqueue context, the same
as __frwr_queue_recovery(). There's no need to defer MR reset if
posting LOCAL_INV MRs fails.
This means that even when ib_post_send() fails (which should occur
very rarely) the invalidation and DMA unmapping steps are still done
in the correct order.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Move the the I/O direction field from rpcrdma_mr_seg into the
rpcrdma_frmr.
This makes it possible to DMA-unmap the frwr long after an RPC has
exited and its rpcrdma_mr_seg array has been released and re-used.
This might occur if an RPC times out while waiting for a new
connection to be established.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Follow same naming convention as other fields in struct
rpcrdma_frwr.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Replace rpcrdma_flush_cqs() and rpcrdma_clean_cqs() with
the new ib_drain_qp() API.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-By: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
rpcrdma_create_chunks() has been replaced, and can be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
rpcrdma_marshal_req() makes a simplifying assumption: that NFS
operations with large Call messages have small Reply messages, and
vice versa. Therefore with RPC-over-RDMA, only one chunk type is
ever needed for each Call/Reply pair, because one direction needs
chunks, the other direction will always fit inline.
In fact, this assumption is asserted in the code:
if (rtype != rpcrdma_noch && wtype != rpcrdma_noch) {
dprintk("RPC: %s: cannot marshal multiple chunk lists\n",
__func__);
return -EIO;
}
But RPCGSS_SEC breaks this assumption. Because krb5i and krb5p
perform data transformation on RPC messages before they are
transmitted, direct data placement techniques cannot be used, thus
RPC messages must be sent via a Long call in both directions.
All such calls are sent with a Position Zero Read chunk, and all
such replies are handled with a Reply chunk. Thus the client must
provide every Call/Reply pair with both a Read list and a Reply
chunk.
Without any special security in effect, NFSv4 WRITEs may now also
use the Read list and provide a Reply chunk. The marshal_req
logic was preventing that, meaning an NFSv4 WRITE with a large
payload that included a GETATTR result larger than the inline
threshold would fail.
The code that encodes each chunk list is now completely contained in
its own function. There is some code duplication, but the trade-off
is that the overall logic should be more clear.
Note that all three chunk lists now share the rl_segments array.
Some additional per-req accounting is necessary to track this
usage. For the same reasons that the above simplifying assumption
has held true for so long, I don't expect more array elements are
needed at this time.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Update documenting comments to reflect code changes over the past
year.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Avoid the latency and interrupt overhead of registering a Write
chunk when handling NFS READ requests of a few hundred bytes or
less.
This change does not interoperate with Linux NFS/RDMA servers
that do not have commit 9d11b51ce7 ('svcrdma: Fix send_reply()
scatter/gather set-up'). Commit 9d11b51ce7 was introduced in v4.3,
and is included in 4.2.y, 4.1.y, and 3.18.y.
Oracle bug 22925946 has been filed to request that the above fix
be included in the Oracle Linux UEK4 NFS/RDMA server.
Red Hat bugzillas 1327280 and 1327554 have been filed to request
that RHEL NFS/RDMA server backports include the above fix.
Workaround: Replace the "proto=rdma,port=20049" mount options
with "proto=tcp" until commit 9d11b51ce7 is applied to your
NFS server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When deciding whether to send a Call inline, rpcrdma_marshal_req
doesn't take into account header bytes consumed by chunk lists.
This results in Call messages on the wire that are sometimes larger
than the inline threshold.
Likewise, when a Write list or Reply chunk is in play, the server's
reply has to emit an RDMA Send that includes a larger-than-minimal
RPC-over-RDMA header.
The actual size of a Call message cannot be estimated until after
the chunk lists have been registered. Thus the size of each
RPC-over-RDMA header can be estimated only after chunks are
registered; but the decision to register chunks is based on the size
of that header. Chicken, meet egg.
The best a client can do is estimate header size based on the
largest header that might occur, and then ensure that inline content
is always smaller than that.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Send buffer space is shared between the RPC-over-RDMA header and
an RPC message. A large RPC-over-RDMA header means less space is
available for the associated RPC message, which then has to be
moved via an RDMA Read or Write.
As more segments are added to the chunk lists, the header increases
in size. Typical modern hardware needs only a few segments to
convey the maximum payload size, but some devices and registration
modes may need a lot of segments to convey data payload. Sometimes
so many are needed that the remaining space in the Send buffer is
not enough for the RPC message. Sending such a message usually
fails.
To ensure a transport can always make forward progress, cap the
number of RDMA segments that are allowed in chunk lists. This
prevents less-capable devices and memory registrations from
consuming a large portion of the Send buffer by reducing the
maximum data payload that can be conveyed with such devices.
For now I choose an arbitrary maximum of 8 RDMA segments. This
allows a maximum size RPC-over-RDMA header to fit nicely in the
current 1024 byte inline threshold with over 700 bytes remaining
for an inline RPC message.
The current maximum data payload of NFS READ or WRITE requests is
one megabyte. To convey that payload on a client with 4KB pages,
each chunk segment would need to handle 32 or more data pages. This
is well within the capabilities of FMR. For physical registration,
the maximum payload size on platforms with 4KB pages is reduced to
32KB.
For FRWR, a device's maximum page list depth would need to be at
least 34 to support the maximum 1MB payload. A device with a smaller
maximum page list depth means the maximum data payload is reduced
when using that device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently the sysctls that allow setting the inline threshold allow
any value to be set.
Small values only make the transport run slower. The default 1KB
setting is as low as is reasonable. And the logic that decides how
to divide a Send buffer between RPC-over-RDMA header and RPC message
assumes (but does not check) that the lower bound is not crazy (say,
57 bytes).
Send and receive buffers share a page with some control information.
Values larger than about 3KB can't be supported, currently.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
RPC-over-RDMA transports have a limit on how large a backward
direction (backchannel) RPC message can be. Ensure that the NFSv4.x
CREATE_SESSION operation advertises this limit to servers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This merges the Qualcomm SOC tree with the net-next, solving the
merge conflict in the SMD API between the two.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UpGH
-----END PGP SIGNATURE-----
Merge tag 'net-next-qcom-soc-4.7-2-merge' of git://github.com/andersson/kernel
Merge tag 'qcom-soc-for-4.7-2' into net-next
This merges the Qualcomm SOC tree with the net-next, solving the
merge conflict in the SMD API between the two.
Pull parallel filesystem directory handling update from Al Viro.
This is the main parallel directory work by Al that makes the vfs layer
able to do lookup and readdir in parallel within a single directory.
That's a big change, since this used to be all protected by the
directory inode mutex.
The inode mutex is replaced by an rwsem, and serialization of lookups of
a single name is done by a "in-progress" dentry marker.
The series begins with xattr cleanups, and then ends with switching
filesystems over to actually doing the readdir in parallel (switching to
the "iterate_shared()" that only takes the read lock).
A more detailed explanation of the process from Al Viro:
"The xattr work starts with some acl fixes, then switches ->getxattr to
passing inode and dentry separately. This is the point where the
things start to get tricky - that got merged into the very beginning
of the -rc3-based #work.lookups, to allow untangling the
security_d_instantiate() mess. The xattr work itself proceeds to
switch a lot of filesystems to generic_...xattr(); no complications
there.
After that initial xattr work, the series then does the following:
- untangle security_d_instantiate()
- convert a bunch of open-coded lookup_one_len_unlocked() to calls of
that thing; one such place (in overlayfs) actually yields a trivial
conflict with overlayfs fixes later in the cycle - overlayfs ended
up switching to a variant of lookup_one_len_unlocked() sans the
permission checks. I would've dropped that commit (it gets
overridden on merge from #ovl-fixes in #for-next; proper resolution
is to use the variant in mainline fs/overlayfs/super.c), but I
didn't want to rebase the damn thing - it was fairly late in the
cycle...
- some filesystems had managed to depend on lookup/lookup exclusion
for *fs-internal* data structures in a way that would break if we
relaxed the VFS exclusion. Fixing hadn't been hard, fortunately.
- core of that series - parallel lookup machinery, replacing
->i_mutex with rwsem, making lookup_slow() take it only shared. At
that point lookups happen in parallel; lookups on the same name
wait for the in-progress one to be done with that dentry.
Surprisingly little code, at that - almost all of it is in
fs/dcache.c, with fs/namei.c changes limited to lookup_slow() -
making it use the new primitive and actually switching to locking
shared.
- parallel readdir stuff - first of all, we provide the exclusion on
per-struct file basis, same as we do for read() vs lseek() for
regular files. That takes care of most of the needed exclusion in
readdir/readdir; however, these guys are trickier than lookups, so
I went for switching them one-by-one. To do that, a new method
'->iterate_shared()' is added and filesystems are switched to it
as they are either confirmed to be OK with shared lock on directory
or fixed to be OK with that. I hope to kill the original method
come next cycle (almost all in-tree filesystems are switched
already), but it's still not quite finished.
- several filesystems get switched to parallel readdir. The
interesting part here is dealing with dcache preseeding by readdir;
that needs minor adjustment to be safe with directory locked only
shared.
Most of the filesystems doing that got switched to in those
commits. Important exception: NFS. Turns out that NFS folks, with
their, er, insistence on VFS getting the fuck out of the way of the
Smart Filesystem Code That Knows How And What To Lock(tm) have
grown the locking of their own. They had their own homegrown
rwsem, with lookup/readdir/atomic_open being *writers* (sillyunlink
is the reader there). Of course, with VFS getting the fuck out of
the way, as requested, the actual smarts of the smart filesystem
code etc. had become exposed...
- do_last/lookup_open/atomic_open cleanups. As the result, open()
without O_CREAT locks the directory only shared. Including the
->atomic_open() case. Backmerge from #for-linus in the middle of
that - atomic_open() fix got brought in.
- then comes NFS switch to saner (VFS-based ;-) locking, killing the
homegrown "lookup and readdir are writers" kinda-sorta rwsem. All
exclusion for sillyunlink/lookup is done by the parallel lookups
mechanism. Exclusion between sillyunlink and rmdir is a real rwsem
now - rmdir being the writer.
Result: NFS lookups/readdirs/O_CREAT-less opens happen in parallel
now.
- the rest of the series consists of switching a lot of filesystems
to parallel readdir; in a lot of cases ->llseek() gets simplified
as well. One backmerge in there (again, #for-linus - rockridge
fix)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (74 commits)
ext4: switch to ->iterate_shared()
hfs: switch to ->iterate_shared()
hfsplus: switch to ->iterate_shared()
hostfs: switch to ->iterate_shared()
hpfs: switch to ->iterate_shared()
hpfs: handle allocation failures in hpfs_add_pos()
gfs2: switch to ->iterate_shared()
f2fs: switch to ->iterate_shared()
afs: switch to ->iterate_shared()
befs: switch to ->iterate_shared()
befs: constify stuff a bit
isofs: switch to ->iterate_shared()
get_acorn_filename(): deobfuscate a bit
btrfs: switch to ->iterate_shared()
logfs: no need to lock directory in lseek
switch ecryptfs to ->iterate_shared
9p: switch to ->iterate_shared()
fat: switch to ->iterate_shared()
romfs, squashfs: switch to ->iterate_shared()
more trivial ->iterate_shared conversions
...
The problem is that fib_info->nh is [0] so the struct fib_info
allocation size depends on number of nexthops. If we just copy fib_info,
we do not copy the nexthops info and driver accesses memory which is not
ours.
Given the fact that fib4 does not defer operations and therefore it does
not need copy, just pass the pointer down to drivers as it was done
before.
Fixes: 850d0cbc91 ("switchdev: remove pointers from switchdev objects")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We saw the following extra refcount release on veth device:
kernel: [7957821.463992] unregister_netdevice: waiting for mesos50284 to become free. Usage count = -1
Since we heavily use mirred action to redirect packets to veth, I think
this is caused by the following race condition:
CPU0:
tcf_mirred_release(): (in RCU callback)
struct net_device *dev = rcu_dereference_protected(m->tcfm_dev, 1);
CPU1:
mirred_device_event():
spin_lock_bh(&mirred_list_lock);
list_for_each_entry(m, &mirred_list, tcfm_list) {
if (rcu_access_pointer(m->tcfm_dev) == dev) {
dev_put(dev);
/* Note : no rcu grace period necessary, as
* net_device are already rcu protected.
*/
RCU_INIT_POINTER(m->tcfm_dev, NULL);
}
}
spin_unlock_bh(&mirred_list_lock);
CPU0:
tcf_mirred_release():
spin_lock_bh(&mirred_list_lock);
list_del(&m->tcfm_list);
spin_unlock_bh(&mirred_list_lock);
if (dev) // <======== Stil refers to the old m->tcfm_dev
dev_put(dev); // <======== dev_put() is called on it again
The action init code path is good because it is impossible to modify
an action that is being removed.
So, fix this by moving everything under the spinlock.
Fixes: 2ee22a90c7 ("net_sched: act_mirred: remove spinlock in fast path")
Fixes: 6bd00b8506 ("act_mirred: fix a race condition on mirred_list")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The publication field of the old netlink API should contain the
publication key and not the publication reference.
Fixes: 44a8ae94fd (tipc: convert legacy nl name table dump to nl compat)
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Backmerge to resolve a conflict in ovl_lookup_real();
"ovl_lookup_real(): use lookup_one_len_unlocked()" instead,
but it was too late in the cycle to rebase.
When we free cb->skb after a dump, we do it after releasing the
lock. This means that a new dump could have started in the time
being and we'll end up freeing their skb instead of ours.
This patch saves the skb and module before we unlock so we free
the right memory.
Fixes: 16b304f340 ("netlink: Eliminate kmalloc in netlink dump operation.")
Reported-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure the socket for which the user is listing publication exists
before parsing the socket netlink attributes.
Prior to this patch a call without any socket caused a NULL pointer
dereference in tipc_nl_publ_dump().
Tested-and-reported-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.cm>
Signed-off-by: David S. Miller <davem@davemloft.net>
memory_usage must be decreased in dequeue_func(), not in
fq_codel_dequeue(), otherwise packets dropped by Codel algo
are missing this decrease.
Also we need to clear memory_usage in fq_codel_reset()
Fixes: 95b58430ab ("fq_codel: add memory limitation per queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Follow-up for 8a3a4c6e7b ("net: make sch_handle_ingress() drop
monitor ready") to also make the egress side drop monitor ready.
Also here only TC_ACT_SHOT is a clear indication that something
went wrong. Hence don't provide false positives to drop monitors
such as 'perf record -e skb:kfree_skb ...'.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function setup_timer combines the initialization of a timer with the
initialization of the timer's function and data fields. The mulitiline
code for timer initialization is now replaced with function setup_timer.
Also, quoting the mod_timer() function comment:
-> mod_timer() is a more efficient way to update the expire field of an
active timer (if the timer is inactive it will be activated).
Use setup_timer() and mod_timer() to setup and arm a timer, making the
code compact and aid readablity.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2016-05-14
Here are two more Bluetooth patches for the 4.7 kernel which we wanted
to get into net-next before the merge window opens. Please let me know
if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This work adds a generic facility for use from eBPF JIT compilers
that allows for further hardening of JIT generated images through
blinding constants. In response to the original work on BPF JIT
spraying published by Keegan McAllister [1], most BPF JITs were
changed to make images read-only and start at a randomized offset
in the page, where the rest was filled with trap instructions. We
have this nowadays in x86, arm, arm64 and s390 JIT compilers.
Additionally, later work also made eBPF interpreter images read
only for kernels supporting DEBUG_SET_MODULE_RONX, that is, x86,
arm, arm64 and s390 archs as well currently. This is done by
default for mentioned JITs when JITing is enabled. Furthermore,
we had a generic and configurable constant blinding facility on our
todo for quite some time now to further make spraying harder, and
first implementation since around netconf 2016.
We found that for systems where untrusted users can load cBPF/eBPF
code where JIT is enabled, start offset randomization helps a bit
to make jumps into crafted payload harder, but in case where larger
programs that cross page boundary are injected, we again have some
part of the program opcodes at a page start offset. With improved
guessing and more reliable payload injection, chances can increase
to jump into such payload. Elena Reshetova recently wrote a test
case for it [2, 3]. Moreover, eBPF comes with 64 bit constants, which
can leave some more room for payloads. Note that for all this,
additional bugs in the kernel are still required to make the jump
(and of course to guess right, to not jump into a trap) and naturally
the JIT must be enabled, which is disabled by default.
For helping mitigation, the general idea is to provide an option
bpf_jit_harden that admins can tweak along with bpf_jit_enable, so
that for cases where JIT should be enabled for performance reasons,
the generated image can be further hardened with blinding constants
for unpriviledged users (bpf_jit_harden == 1), with trading off
performance for these, but not for privileged ones. We also added
the option of blinding for all users (bpf_jit_harden == 2), which
is quite helpful for testing f.e. with test_bpf.ko. There are no
further e.g. hardening levels of bpf_jit_harden switch intended,
rationale is to have it dead simple to use as on/off. Since this
functionality would need to be duplicated over and over for JIT
compilers to use, which are already complex enough, we provide a
generic eBPF byte-code level based blinding implementation, which is
then just transparently JITed. JIT compilers need to make only a few
changes to integrate this facility and can be migrated one by one.
This option is for eBPF JITs and will be used in x86, arm64, s390
without too much effort, and soon ppc64 JITs, thus that native eBPF
can be blinded as well as cBPF to eBPF migrations, so that both can
be covered with a single implementation. The rule for JITs is that
bpf_jit_blind_constants() must be called from bpf_int_jit_compile(),
and in case blinding is disabled, we follow normally with JITing the
passed program. In case blinding is enabled and we fail during the
process of blinding itself, we must return with the interpreter.
Similarly, in case the JITing process after the blinding failed, we
return normally to the interpreter with the non-blinded code. Meaning,
interpreter doesn't change in any way and operates on eBPF code as
usual. For doing this pre-JIT blinding step, we need to make use of
a helper/auxiliary register, here BPF_REG_AX. This is strictly internal
to the JIT and not in any way part of the eBPF architecture. Just like
in the same way as JITs internally make use of some helper registers
when emitting code, only that here the helper register is one
abstraction level higher in eBPF bytecode, but nevertheless in JIT
phase. That helper register is needed since f.e. manually written
program can issue loads to all registers of eBPF architecture.
The core concept with the additional register is: blind out all 32
and 64 bit constants by converting BPF_K based instructions into a
small sequence from K_VAL into ((RND ^ K_VAL) ^ RND). Therefore, this
is transformed into: BPF_REG_AX := (RND ^ K_VAL), BPF_REG_AX ^= RND,
and REG <OP> BPF_REG_AX, so actual operation on the target register
is translated from BPF_K into BPF_X one that is operating on
BPF_REG_AX's content. During rewriting phase when blinding, RND is
newly generated via prandom_u32() for each processed instruction.
64 bit loads are split into two 32 bit loads to make translation and
patching not too complex. Only basic thing required by JITs is to
call the helper bpf_jit_blind_constants()/bpf_jit_prog_release_other()
pair, and to map BPF_REG_AX into an unused register.
Small bpf_jit_disasm extract from [2] when applied to x86 JIT:
echo 0 > /proc/sys/net/core/bpf_jit_harden
ffffffffa034f5e9 + <x>:
[...]
39: mov $0xa8909090,%eax
3e: mov $0xa8909090,%eax
43: mov $0xa8ff3148,%eax
48: mov $0xa89081b4,%eax
4d: mov $0xa8900bb0,%eax
52: mov $0xa810e0c1,%eax
57: mov $0xa8908eb4,%eax
5c: mov $0xa89020b0,%eax
[...]
echo 1 > /proc/sys/net/core/bpf_jit_harden
ffffffffa034f1e5 + <x>:
[...]
39: mov $0xe1192563,%r10d
3f: xor $0x4989b5f3,%r10d
46: mov %r10d,%eax
49: mov $0xb8296d93,%r10d
4f: xor $0x10b9fd03,%r10d
56: mov %r10d,%eax
59: mov $0x8c381146,%r10d
5f: xor $0x24c7200e,%r10d
66: mov %r10d,%eax
69: mov $0xeb2a830e,%r10d
6f: xor $0x43ba02ba,%r10d
76: mov %r10d,%eax
79: mov $0xd9730af,%r10d
7f: xor $0xa5073b1f,%r10d
86: mov %r10d,%eax
89: mov $0x9a45662b,%r10d
8f: xor $0x325586ea,%r10d
96: mov %r10d,%eax
[...]
As can be seen, original constants that carry payload are hidden
when enabled, actual operations are transformed from constant-based
to register-based ones, making jumps into constants ineffective.
Above extract/example uses single BPF load instruction over and
over, but of course all instructions with constants are blinded.
Performance wise, JIT with blinding performs a bit slower than just
JIT and faster than interpreter case. This is expected, since we
still get all the performance benefits from JITing and in normal
use-cases not every single instruction needs to be blinded. Summing
up all 296 test cases averaged over multiple runs from test_bpf.ko
suite, interpreter was 55% slower than JIT only and JIT with blinding
was 8% slower than JIT only. Since there are also some extremes in
the test suite, I expect for ordinary workloads that the performance
for the JIT with blinding case is even closer to JIT only case,
f.e. nmap test case from suite has averaged timings in ns 29 (JIT),
35 (+ blinding), and 151 (interpreter).
BPF test suite, seccomp test suite, eBPF sample code and various
bigger networking eBPF programs have been tested with this and were
running fine. For testing purposes, I also adapted interpreter and
redirected blinded eBPF image to interpreter and also here all tests
pass.
[1] http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html
[2] https://github.com/01org/jit-spray-poc-for-ksp/
[3] http://www.openwall.com/lists/kernel-hardening/2016/05/03/5
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Elena Reshetova <elena.reshetova@intel.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the blinding is strictly only called from inside eBPF JITs,
we need to change signatures for bpf_int_jit_compile() and
bpf_prog_select_runtime() first in order to prepare that the
eBPF program we're dealing with can change underneath. Hence,
for call sites, we need to return the latest prog. No functional
change in this patch.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split the HAVE_BPF_JIT into two for distinguishing cBPF and eBPF JITs.
Current cBPF ones:
# git grep -n HAVE_CBPF_JIT arch/
arch/arm/Kconfig:44: select HAVE_CBPF_JIT
arch/mips/Kconfig:18: select HAVE_CBPF_JIT if !CPU_MICROMIPS
arch/powerpc/Kconfig:129: select HAVE_CBPF_JIT
arch/sparc/Kconfig:35: select HAVE_CBPF_JIT
Current eBPF ones:
# git grep -n HAVE_EBPF_JIT arch/
arch/arm64/Kconfig:61: select HAVE_EBPF_JIT
arch/s390/Kconfig:126: select HAVE_EBPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES
arch/x86/Kconfig:94: select HAVE_EBPF_JIT if X86_64
Later code also needs this facility to check for eBPF JITs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Besides others, remove redundant comments where the code is self
documenting enough, and properly indent various bpf_verifier_ops
and bpf_prog_type_list declarations. Moreover, remove two exports
that actually have no module user.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_hdr() is slightly more expensive than using skb->data in contexts
where we know they point to the same byte.
In receive path, tcp_v4_rcv() and tcp_v6_rcv() are in this situation,
as tcp header has not been pulled yet.
In output path, the same can be said when we just pushed the tcp header
in the skb, in tcp_transmit_skb() and tcp_make_synack()
Also factorize the two checks for tcb->tcp_flags & TCPHDR_SYN in
tcp_transmit_skb() and pass tcp header pointer to tcp_ecn_send(),
so that compiler can further optimize and avoid a reload.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__sock_cmsg_send() might return different error codes, not only -EINVAL.
Fixes: 24025c465f ("ipv4: process socket-level control messages in IPv4")
Fixes: ad1e46a837 ("ipv6: process socket-level control messages in IPv6")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Having multiple loadable modules with the same name cannot work
with modprobe, and having both net/qrtr/smd.ko and drivers/soc/qcom/smd.ko
results in a (somewhat cryptic) build error:
ERROR: "qcom_smd_driver_unregister" [net/qrtr/smd.ko] undefined!
ERROR: "qcom_smd_driver_register" [net/qrtr/smd.ko] undefined!
ERROR: "qcom_smd_set_drvdata" [net/qrtr/smd.ko] undefined!
ERROR: "qcom_smd_send" [net/qrtr/smd.ko] undefined!
ERROR: "qcom_smd_get_drvdata" [net/qrtr/smd.ko] undefined!
ERROR: "qcom_smd_driver_unregister" [drivers/soc/qcom/wcnss_ctrl.ko] undefined!
ERROR: "qcom_smd_driver_register" [drivers/soc/qcom/wcnss_ctrl.ko] undefined!
ERROR: "qcom_smd_set_drvdata" [drivers/soc/qcom/wcnss_ctrl.ko] undefined!
ERROR: "qcom_smd_send" [drivers/soc/qcom/wcnss_ctrl.ko] undefined!
ERROR: "qcom_smd_get_drvdata" [drivers/soc/qcom/wcnss_ctrl.ko] undefined!
Also, the qrtr driver uses the SMD interface and has a Kconfig dependency,
but also allows for compile-testing when SMD is disabled. However, if
with QCOM_SMD=m and COMPILE_TEST=y we can end up with QRTR_SMD=y and
that fails with a related link error.
The changes the dependency so we can still compile-test the driver but
not have it built-in if SMD is a module, to avoid running in the broken
configuration, and changes the Makefile to provide the driver under
a different module name.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: bdabad3e36 ("net: Add Qualcomm IPC router")
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new command in ndo_setup_tc() for hardware offloaded
filters, to call the NIC driver, and make it update the statistics.
This will be done before dumping the filter and its statistics.
Signed-off-by: Amir Vadai <amirva@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the stats_update callback that will be called by NIC drivers
for hardware offloaded filters.
Signed-off-by: Amir Vadai <amirva@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On devices that support TC U32 offloads, this flag enables a filter to be
added only to HW. skip-sw and skip-hw are mutually exclusive flags. By
default without any flags, the filter is added to both HW and SW, but no
error checks are done in case of failure to add to HW. With skip-sw,
failure to add to HW is treated as an error.
Here is a sample script that adds 2 filters, one with skip-sw and the other
with skip-hw flag.
# add ingress qdisc
tc qdisc add dev p4p1 ingress
# enable hw tc offload.
ethtool -K p4p1 hw-tc-offload on
# add u32 filter with skip-sw flag.
tc filter add dev p4p1 parent ffff: protocol ip prio 99 \
handle 800:0:1 u32 ht 800: flowid 800:1 \
skip-sw \
match ip src 192.168.1.0/24 \
action drop
# add u32 filter with skip-hw flag.
tc filter add dev p4p1 parent ffff: protocol ip prio 99 \
handle 800:0:2 u32 ht 800: flowid 800:2 \
skip-hw \
match ip src 192.168.2.0/24 \
action drop
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The nf_conntrack_core.c fix in 'net' is not relevant in 'net-next'
because we no longer have a per-netns conntrack hash.
The ip_gre.c conflict as well as the iwlwifi ones were cases of
overlapping changes.
Conflicts:
drivers/net/wireless/intel/iwlwifi/mvm/tx.c
net/ipv4/ip_gre.c
net/netfilter/nf_conntrack_core.c
Signed-off-by: David S. Miller <davem@davemloft.net>
Switchdev has been around for quite a while now, putting "EXPERIMENTAL"
in the description is no longer accurate, drop it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when creating or updating a route, no check is performed
in both ipv4 and ipv6 code to the hoplimit value.
The caller can i.e. set hoplimit to 256, and when such route will
be used, packets will be sent with hoplimit/ttl equal to 0.
This commit adds checks for the RTAX_HOPLIMIT value, in both ipv4
ipv6 route code, substituting any value greater than 255 with 255.
This is consistent with what is currently done for ADVMSS and MTU
in the ipv4 code.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The slab name ends up being visible in the directory structure under
/sys, and even if you don't have access rights to the file you can see
the filenames.
Just use a 64-bit counter instead of the pointer to the 'net' structure
to generate a unique name.
This code will go away in 4.7 when the conntrack code moves to a single
kmemcache, but this is the backportable simple solution to avoiding
leaking kernel pointers to user space.
Fixes: 5b3501faa8 ("netfilter: nf_conntrack: per netns nf_conntrack_cachep")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
* Change SMD callback parameters
* Use writecombine mapping for SMEM
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Jzqj
-----END PGP SIGNATURE-----
Merge tag 'qcom-soc-for-4.7-2' into net-next
This merges the Qualcomm SOC tree with the net-next, solving the
merge conflict in the SMD API between the two.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Clean up: Pass in just the piece of the svc_rqst that is needed
here.
While we're in the area, add an informative documenting comment.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the server has forced a disconnect, the associated QP has not
been moved to the Error state, and thus Receives are still posted.
Ensure Receives (and any other outstanding WRs) are drained to
release resources that can be freed during teardown of the
svcrdma_xprt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since backward direction support was added, the rq_depth was
increased to accommodate both forward and backward Receives.
But only forward Receives need to be posted after a connection
has been accepted. Receives for backward replies are posted as
needed by svc_rdma_bc_sendto().
This doesn't break anything, but it means some resources are
wasted.
Fixes: 03fe993153 ('svcrdma: Define maximum number of ...')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: svc_rdma_get_read_chunk() already returns a pointer
to the Read list. No need to set "ch" again to the value it
already contains.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Get a fresh op_ctxt in send_reply() instead of in svc_rdma_sendto().
This ensures that svc_rdma_put_context() is invoked only once if
send_reply() fails.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
An xdr_buf has a head, a vector of pages, and a tail. Each
RPC request is presented to the NFS server contained in an
xdr_buf.
The RDMA transport would like to supply the NFS server with only
the NFS WRITE payload bytes in the page vector. In some common
cases, that would allow the NFS server to swap those pages right
into the target file's page cache.
Have the transport's RDMA Read logic put XDR pad bytes in the tail
iovec, and not in the pages that hold the data payload.
The NFSv3 WRITE XDR decoder is finicky about the lengths involved,
so make sure it is looking in the correct places when computing
the total length of the incoming NFS WRITE request.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow both IPv4 and IPv6 to bind same port at the same time,
restricts use of the IPv6 socket to IPv6 communication.
Changes from v1:
- Check rdma_set_afonly return value (suggested by Leon Romanovsky)
Changes from v2:
- Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The SRP initiator allows to set max_sectors to a value that exceeds
the largest amount of data that can be mapped at once with an mlx4
HCA using fast registration and a page size of 4 KB. Hence modify
ib_map_mr_sg() such that it can map partial sg-elements. If an
sg-element has been mapped partially, let the caller know
which fraction has been mapped by adjusting *sg_offset.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
With all the latest fixes applied, I am still able to reproduce this
(and other) warning(s):
WARNING: CPU: 1 PID: 19684 at ../kernel/workqueue.c:4092 destroy_workqueue+0x70a/0x770()
...
Call Trace:
[<ffffffff819fee81>] ? dump_stack+0xb3/0x112
[<ffffffff8117377e>] ? warn_slowpath_common+0xde/0x140
[<ffffffff811ce68a>] ? destroy_workqueue+0x70a/0x770
[<ffffffff811739ae>] ? warn_slowpath_null+0x2e/0x40
[<ffffffff811ce68a>] ? destroy_workqueue+0x70a/0x770
[<ffffffffa0c944c9>] ? hci_unregister_dev+0x2a9/0x720 [bluetooth]
[<ffffffffa0b301db>] ? vhci_release+0x7b/0xf0 [hci_vhci]
[<ffffffffa0b30160>] ? vhci_flush+0x50/0x50 [hci_vhci]
[<ffffffff8117cd73>] ? do_exit+0x863/0x2b90
This is due to race present in the hci_unregister_dev path.
hdev->power_on work races with hci_dev_do_close. One tries to open,
the other tries to close, leading to warning like the above. (Another
example is a warning in kobject_get or kobject_put depending on who
wins the race.)
Fix this by switching those two racers to ensure hdev->power_on never
triggers while hci_dev_do_close is in progress.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
While testing an OpenStack configuration using VXLANs I saw the following
call trace:
RIP: 0010:[<ffffffff815fad49>] udp4_lib_lookup_skb+0x49/0x80
RSP: 0018:ffff88103867bc50 EFLAGS: 00010286
RAX: ffff88103269bf00 RBX: ffff88103269bf00 RCX: 00000000ffffffff
RDX: 0000000000004300 RSI: 0000000000000000 RDI: ffff880f2932e780
RBP: ffff88103867bc60 R08: 0000000000000000 R09: 000000009001a8c0
R10: 0000000000004400 R11: ffffffff81333a58 R12: ffff880f2932e794
R13: 0000000000000014 R14: 0000000000000014 R15: ffffe8efbfd89ca0
FS: 0000000000000000(0000) GS:ffff88103fd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000488 CR3: 0000000001c06000 CR4: 00000000001426e0
Stack:
ffffffff81576515 ffffffff815733c0 ffff88103867bc98 ffffffff815fcc17
ffff88103269bf00 ffffe8efbfd89ca0 0000000000000014 0000000000000080
ffffe8efbfd89ca0 ffff88103867bcc8 ffffffff815fcf8b ffff880f2932e794
Call Trace:
[<ffffffff81576515>] ? skb_checksum+0x35/0x50
[<ffffffff815733c0>] ? skb_push+0x40/0x40
[<ffffffff815fcc17>] udp_gro_receive+0x57/0x130
[<ffffffff815fcf8b>] udp4_gro_receive+0x10b/0x2c0
[<ffffffff81605863>] inet_gro_receive+0x1d3/0x270
[<ffffffff81589e59>] dev_gro_receive+0x269/0x3b0
[<ffffffff8158a1b8>] napi_gro_receive+0x38/0x120
[<ffffffffa0871297>] gro_cell_poll+0x57/0x80 [vxlan]
[<ffffffff815899d0>] net_rx_action+0x160/0x380
[<ffffffff816965c7>] __do_softirq+0xd7/0x2c5
[<ffffffff8107d969>] run_ksoftirqd+0x29/0x50
[<ffffffff8109a50f>] smpboot_thread_fn+0x10f/0x160
[<ffffffff8109a400>] ? sort_range+0x30/0x30
[<ffffffff81096da8>] kthread+0xd8/0xf0
[<ffffffff81693c82>] ret_from_fork+0x22/0x40
[<ffffffff81096cd0>] ? kthread_park+0x60/0x60
The following trace is seen when receiving a DHCP request over a flow-based
VXLAN tunnel. I believe this is caused by the metadata dst having a NULL
dev value and as a result dev_net(dev) is causing a NULL pointer dereference.
To resolve this I am replacing the check for skb_dst(skb)->dev with just
skb->dev. This makes sense as the callers of this function are usually in
the receive path and as such skb->dev should always be populated. In
addition other functions in the area where these are called are already
using dev_net(skb->dev) to determine the namespace the UDP packet belongs
in.
Fixes: 63058308cd ("udp: Add udp6_lib_lookup_skb and udp4_lib_lookup_skb")
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sunrpc is using SOCKWQ_ASYNC_NOSPACE without setting SOCK_FASYNC,
so the recent optimizations done in sk_set_bit() and sk_clear_bit()
broke it.
There is still the risk that a subsequent sock_fasync() call
would clear SOCK_FASYNC, but sunrpc does not use this yet.
Fixes: 9317bb6982 ("net: SOCKWQ_ASYNC_NOSPACE optimizations")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jiri Pirko <jiri@resnulli.us>
Reported-by: Huang, Ying <ying.huang@intel.com>
Tested-by: Jiri Pirko <jiri@resnulli.us>
Tested-by: Huang, Ying <ying.huang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an ACTIVATE or data packet is received in a link in state
ESTABLISHING, the link does not immediately change state to
ESTABLISHED, but does instead return a LINK_UP event to the caller,
which will execute the state change in a different lock context.
This non-atomic approach incurs a low risk that we may have two
LINK_UP events pending simultaneously for the same link, resulting
in the final part of the setup procedure being executed twice. The
only potential harm caused by this it that we may see two LINK_UP
events issued to subsribers of the topology server, something that
may cause confusion.
This commit eliminates this risk by checking if the link is already
up before proceeding with the second half of the setup.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When dealing with WCCP in gre6 tunnel, it sets the wrong tpi->protocol,
that is, ETH_P_IP instead of ETH_P_IPV6 for the encapuslated traffic.
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do not include attribute IFLA_GRE_TOS.
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* completion and fixups of nla_put_64_64bit() work
* remove a/b/g/n from wext nickname to avoid confusion
with 11ac (which wouldn't even fit fully there due to
string length restrictions)
along with some other minor changes/cleanups.
-----BEGIN PGP SIGNATURE-----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=QNxF
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2016-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Some more work for 4.7, notably:
* completion and fixups of nla_put_64_64bit() work
* remove a/b/g/n from wext nickname to avoid confusion
with 11ac (which wouldn't even fit fully there due to
string length restrictions)
along with some other minor changes/cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since 4.4 we erronously use timestamp of the netlink skb (which is zero).
Bugzilla: https://bugzilla.netfilter.org/show_bug.cgi?id=1066
Fixes: b28b1e826f ("netfilter: nfnetlink_queue: use y2038 safe timestamp")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When using RSS, frames might not be processed in the correct order,
and thus AP_LINK_PS must be used; most likely with firmware keeping
track of the powersave state, this is the case in iwlwifi now.
In this case, the driver can use ieee80211_sta_ps_transition() to
still have mac80211 manage powersave buffering. However, for U-APSD
and PS-Poll this isn't sufficient. If the device can't manage that
entirely on its own, mac80211's code should be used.
To allow this, export two functions: ieee80211_sta_uapsd_trigger()
and ieee80211_sta_pspoll().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no harm in having drivers read the list, since they can
use RCU protection or RTNL locking; allow this to not require
each and every driver to also implement its own bookkeeping.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The devlist_mtx mutex was removed about two years ago, in favour of just
using RTNL/RCU protection. Remove the comment still referencing it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This allows finding vendor IE from a specific vendor.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some hardware (iwlwifi an example) de-aggregate AMSDUs and copy the IV
as is to the generated MPDUs, so the same PN appears in multiple
packets without being a replay attack. Allow driver to explicitly
indicate that a frame is allowed to have the same PN as the previous
frame.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In some cases, after a sudden AP disappearing and reconnection to
another AP in the same ESS, user space gets the old AP in scan
results (cached). User space may decide to roam to that old AP
which will cause a disconnection and longer recovery.
Remove APs that are probably out of range from BSS table.
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is the first NFC pull request for 4.7. With this one we
mainly have:
- Support for NXP's pn532 NFC chipset. The pn532 is based on the same
microcontroller as the pn533, but it talks to the host through i2c
instead of USB. By separating the pn533 driver into core and PHY
parts, we can not add the i2c layer and support the pn532 chipset.
- Support for NCI's loopback mode. This is a testing mode where each
packet received by the NFCC is sent back to the DH, allowing the
host to test that the controller can receive and send data.
- A few ACPI related fixes for the STMicro drivers, in order to match
the device tree naming scheme.
- A bunch of cleanups for the st-nci and the st21nfca STMicro drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zM22
-----END PGP SIGNATURE-----
Merge tag 'nfc-next-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next
Samuel Ortiz says:
====================
NFC 4.7 pull request
This is the first NFC pull request for 4.7. With this one we
mainly have:
- Support for NXP's pn532 NFC chipset. The pn532 is based on the same
microcontroller as the pn533, but it talks to the host through i2c
instead of USB. By separating the pn533 driver into core and PHY
parts, we can not add the i2c layer and support the pn532 chipset.
- Support for NCI's loopback mode. This is a testing mode where each
packet received by the NFCC is sent back to the DH, allowing the
host to test that the controller can receive and send data.
- A few ACPI related fixes for the STMicro drivers, in order to match
the device tree naming scheme.
- A bunch of cleanups for the st-nci and the st21nfca STMicro drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The dsa_switch structure contains a dsa_chip_data member called pd.
However in the rest of the code, pd is used for dsa_platform_data.
This is confusing. Rename it cd, which is already often used in dsa.c
and slave.c for this data type.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The switch drivers only use the master_dev member for dev_info()
messages. Now that the device is passed to the old style probe, and
new style drivers are probed as true linux drivers, this is no longer
needed.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Resetting the switch is something the driver does, not the framework.
So move the parsing of this property into the driver.
There are no in kernel users of this property, so moving it does not
break anything. There is however a board which will make use of this
property making its way into the kernel.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Applications such as OSPF and BFD need the original ingress device not
the VRF device; the latter can be derived from the former. To that end
add the skb_iif to inet_skb_parm and set it in ipv4 code after clearing
the skb control buffer similar to IPv6. From there the pktinfo can just
pull it from cb with the PKTINFO_SKB_CB cast.
The previous patch moving the skb->dev change to L3 means nothing else
is needed for IPv6; it just works.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the VRF driver uses the rx_handler to switch the skb device
to the VRF device. Switching the dev prior to the ip / ipv6 layer
means the VRF driver has to duplicate IP/IPv6 processing which adds
overhead and makes features such as retaining the ingress device index
more complicated than necessary.
This patch moves the hook to the L3 layer just after the first NF_HOOK
for PRE_ROUTING. This location makes exposing the original ingress device
trivial (next patch) and allows adding other NF_HOOKs to the VRF driver
in the future.
dev_queue_xmit_nit is exported so that the VRF driver can cycle the skb
with the switched device through the packet taps to maintain current
behavior (tcpdump can be used on either the vrf device or the enslaved
devices).
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Protocol for 4in6 tunnel is IPPROTO_IPIP. This was wrongly changed by
the last cleanup.
CC: Tom Herbert <tom@herbertland.com>
Fixes: 0d3c703a9d ("ipv6: Cleanup IPv6 tunnel receive path")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For ipgre interface in collect metadata mode, it doesn't make sense for the
interface to be of ARPHRD_IPGRE type. The outer header of received packets
is not needed, as all the information from it is present in metadata_dst. We
already don't set ipgre_header_ops for collect metadata interfaces, which is
the only consumer of mac_header pointing to the outer IP header.
Just set the interface type to ARPHRD_NONE in collect metadata mode for
ipgre (not gretap, that still correctly stays ARPHRD_ETHER) and reset
mac_header.
Fixes: a64b04d86d ("gre: do not assign header_ops in collect metadata mode")
Fixes: 2e15ea390e ("ip_gre: Add support to collect tunnel metadata.")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using conntrack helpers from OVS, a common configuration is to
perform a lookup without specifying a helper, then go through a
firewalling policy, only to decide to attach a helper afterwards.
In this case, the initial lookup will cause a ct entry to be attached to
the skb, then the later commit with helper should attach the helper and
confirm the connection. However, the helper attachment has been missing.
If the user has enabled automatic helper attachment, then this issue
will be masked as it will be applied in init_conntrack(). It is also
masked if the action is executed from ovs_packet_cmd_execute() as that
will construct a fresh skb.
This patch fixes the issue by making an explicit call to try to assign
the helper if there is a discrepancy between the action's helper and the
current skb->nfct.
Fixes: cae3a26275 ("openvswitch: Allow attaching helpers to ct action")
Signed-off-by: Joe Stringer <joe@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace 2 arguments (cnt and rtt) in the congestion control modules'
pkts_acked() function with a struct. This will allow adding more
information without having to modify existing congestion control
modules (tcp_nv in particular needs bytes in flight when packet
was sent).
As proposed by Neal Cardwell in his comments to the tcp_nv patch.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The process below was broken and is fixed with this patch.
//add an ife action and give it an instance id of 1
sudo tc actions add action ife encode \
type 0xDEAD allow mark dst 02:15:15:15:15:15 index 1
//create a filter which binds to ife action id 1
sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\
match ip dst 17.0.0.1/32 flowid 1:11 action ife index 1
Message before fix was:
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The process below was broken and is fixed with this patch.
//add a skbedit action and give it an instance id of 1
sudo tc actions add action skbedit mark 10 index 1
//create a filter which binds to skbedit action id 1
sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\
match ip dst 17.0.0.1/32 flowid 1:10 action skbedit index 1
Message before fix was:
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The process below was broken and is fixed with this patch.
//add a simple action and give it an instance id of 1
sudo tc actions add action simple sdata "foobar" index 1
//create a filter which binds to simple action id 1
sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\
match ip dst 17.0.0.1/32 flowid 1:10 action simple index 1
Message before fix was:
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The process below was broken and is fixed with this patch.
//add an mirred action and give it an instance id of 1
sudo tc actions add action mirred egress mirror dev $MDEV index 1
//create a filter which binds to mirred action id 1
sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\
match ip dst 17.0.0.1/32 flowid 1:10 action mirred index 1
Message before bug fix was:
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This was broken and is fixed with this patch.
//add an ipt action and give it an instance id of 1
sudo tc actions add action ipt -j mark --set-mark 2 index 1
//create a filter which binds to ipt action id 1
sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32\
match ip dst 17.0.0.1/32 flowid 1:10 action ipt index 1
Message before bug fix was:
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Late vlan action binding was broken and is fixed with this patch.
//add a vlan action to pop and give it an instance id of 1
sudo tc actions add action vlan pop index 1
//create filter which binds to vlan action id 1
sudo tc filter add dev $DEV parent ffff: protocol ip prio 1 u32 \
match ip dst 17.0.0.1/32 flowid 1:1 action vlan index 1
current message(before bug fix) was:
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- remove useless skb size check in batadv_interface_rx
- basic netns support introduced by Andrew Lunn:
- prevent virtual interface from changing netns by setting
NETIF_F_NETNS_LOCAL
- create virtual interface within the netns of the first
hard-interface
- introduce detection of complex bridge loops and report event
to the user (via udev) when the Bridge Loop Avoidance mechanism
can't prevent them
- minor reference counting bugfixes for the hard_iface object that
couldn't make it via the net tree
- use kref_get() instead of kref_get_unless_zero() to make reference
counting bug more visible
- use batadv_compare_eth() all over the code when possible instead of
plain memcmp()
- minor code cleanup and style adjustments
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=CB1D
-----END PGP SIGNATURE-----
Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge
Antonio Quartulli says:
====================
Included changes:
- remove useless skb size check in batadv_interface_rx
- basic netns support introduced by Andrew Lunn:
- prevent virtual interface from changing netns by setting
NETIF_F_NETNS_LOCAL
- create virtual interface within the netns of the first
hard-interface
- introduce detection of complex bridge loops and report event
to the user (via udev) when the Bridge Loop Avoidance mechanism
can't prevent them
- minor reference counting bugfixes for the hard_iface object that
couldn't make it via the net tree
- use kref_get() instead of kref_get_unless_zero() to make reference
counting bug more visible
- use batadv_compare_eth() all over the code when possible instead of
plain memcmp()
- minor code cleanup and style adjustments
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two instances of an unused variable, `doff' added by
commit 6fa01ccd88 ("skbuff: Add pskb_extract() helper function")
in pskb_carve_inside_header() and pskb_carve_inside_nonlinear().
Remove these instances, they are not used.
Reported by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The handler 'ila_fill_encap_info' adds two attributes: ILA_ATTR_LOCATOR
and ILA_ATTR_CSUM_MODE.
nla_total_size_64bit() must be use for ILA_ATTR_LOCATOR.
Also, do nla_put_u8 instead of nla_put_u64 for ILA_ATTR_CSUM_MODE.
Fixes: f13a82d87b ("ipv6: use nla_put_u64_64bit()")
Fixes: 90bfe662db ("ila: add checksum neutral ILA translations")
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the very unlikely case __tcp_retransmit_skb() can not use the cloning
done in tcp_transmit_skb(), we need to refresh skb_mstamp before doing
the copy and transmit, otherwise TCP TS val will be an exact copy of
original transmit.
Fixes: 7faee5c0d5 ("tcp: remove TCP_SKB_CB(skb)->when")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When comparing Ethernet address it is better to use the more
generic batadv_compare_eth. The latter is also optimised for
architectures having a fast unaligned access.
Signed-off-by: Antonio Quartulli <a@unstable.cc>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Reviewed-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
It is easier to understand that the returned value of a specific function
doesn't have to be 0 when the functions was successful when the actual
return type is bool. This is especially true when all surrounding functions
with return type int use negative values to return the error code.
Reported-by: Nicholas Krause <xerofoify@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
