Multiple threads can manipulate uprobe->flags, this is obviously
unsafe. For example mmap can set UPROBE_COPY_INSN while register
tries to set UPROBE_RUN_HANDLER, the latter can also race with
can_skip_sstep() which clears UPROBE_SKIP_SSTEP.
Change this code to use bitops.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
install_breakpoint() is called under mm->mmap_sem, this protects
set_swbp() but not prepare_uprobe(). Two or more different tasks
can call install_breakpoint()->prepare_uprobe() at the same time,
this leads to numerous problems if UPROBE_COPY_INSN is not set.
Just for example, the second copy_insn() can corrupt the already
analyzed/fixuped uprobe->arch.insn and race with handle_swbp().
This patch simply adds uprobe->copy_mutex to serialize this code.
We could probably reuse ->consumer_rwsem, but this would mean that
consumer->handler() can not use mm->mmap_sem, not good.
Note: this is another temporary ugly hack until we move this logic
into uprobe_register().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Preparation. Extract the copy_insn/arch_uprobe_analyze_insn code
from install_breakpoint() into the new helper, prepare_uprobe().
And move uprobe->flags defines from uprobes.h to uprobes.c, nobody
else can use them anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Strictly speaking this race was added by me in 56bb4cf6. However
I think that this bug is just another indication that we should
move copy_insn/uprobe_analyze_insn code from install_breakpoint()
to uprobe_register(), there are a lot of other reasons for that.
Until then, add a hack to close the race.
A task can hit uprobe U1, but before it calls find_uprobe() this
uprobe can be unregistered *AND* another uprobe U2 can be added to
uprobes_tree at the same inode/offset. In this case handle_swbp()
will use the not-fully-initialized U2, in particular its arch.insn
for xol.
Add the additional !UPROBE_COPY_INSN check into handle_swbp(),
if this flag is not set we simply restart as if the new uprobe was
not inserted yet. This is not very nice, we need barriers, but we
will remove this hack when we change uprobe_register().
Note: with or without this patch install_breakpoint() can race with
itself, yet another reson to kill UPROBE_COPY_INSN altogether. And
even the usage of uprobe->flags is not safe. See the next patches.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
delete_uprobe() must not be called if register_for_each_vma(false)
fails to remove all breakpoints, __uprobe_unregister() is correct.
The problem is that register_for_each_vma(false) always returns 0
and thus this logic does not work.
1. Change verify_opcode() to return 0 rather than -EINVAL when
unregister detects the !is_swbp insn, we can treat this case
as success and currently unregister paths ignore the error
code anyway.
2. Change remove_breakpoint() to propagate the error code from
write_opcode().
3. Change register_for_each_vma(is_register => false) to remove
as much breakpoints as possible but return non-zero if
remove_breakpoint() fails at least once.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
After the previous change is_swbp_at_addr() is always called with
current->mm. Remove this check and move it close to its single caller.
Also, remove the obsolete comment about is_swbp_at_addr() and
uprobe_state.count.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Unlike set_swbp(), set_orig_insn()->is_swbp_at_addr() makes sense,
although it can't prevent all confusions.
But the usage of is_swbp_at_addr() is equally confusing, and it adds
the extra get_user_pages() we can avoid.
This patch removes set_orig_insn()->is_swbp_at_addr() but changes
write_opcode() to do the necessary checks before replace_page().
Perhaps it also makes sense to ensure PAGE_MAPPING_ANON in unregister
case.
find_active_uprobe() becomes the only user of is_swbp_at_addr(),
we can change its semantics.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
No functional changes, preparations.
1. Extract the kmap-and-memcpy code from read_opcode() into the
new trivial helper, copy_opcode(). The next patch will add
another user.
2. read_opcode() becomes really trivial, fold it into its single
caller, is_swbp_at_addr().
3. Remove "auprobe" argument from write_opcode(), it is not used
since f403072c6.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
A separate patch for better documentation.
set_swbp()->is_swbp_at_addr() is not needed for correctness, it is
harmless to do the unnecessary __replace_page(old_page, new_page)
when these 2 pages are identical.
And it can not be counted as optimization. mmap/register races are
very unlikely, while in the likely case is_swbp_at_addr() adds the
extra get_user_pages() even if the caller is uprobe_mmap(current->mm)
and returns false.
Note also that the semantics/usage of is_swbp_at_addr() in uprobe.c
is confusing. set_swbp() uses it to detect the case when this insn
was already modified by uprobes, that is why it should always compare
the opcode with UPROBE_SWBP_INSN even if the hardware (like powerpc)
has other trap insns. It doesn't matter if this breakpoint was in fact
installed by gdb or application itself, we are going to "steal" this
breakpoint anyway and execute the original insn from vm_file even if
it no longer matches the memory.
OTOH, handle_swbp()->find_active_uprobe() uses is_swbp_at_addr() to
figure out whether we need to send SIGTRAP or not if we can not find
uprobe, so in this case it should return true for all trap variants,
not only for UPROBE_SWBP_INSN.
This patch removes set_swbp()->is_swbp_at_addr(), the next patches
will remove it from set_orig_insn() which is similar to set_swbp()
in this respect. So the only caller will be handle_swbp() and we
can make its semantics clear.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
valid_vma(false) ignores ->vm_flags, this is not actually right.
We should never try to write into MAP_SHARED mapping, this can
confuse an apllication which actually writes to ->vm_file.
With this patch valid_vma(false) ignores VM_WRITE only but checks
other (immutable) bits checked by valid_vma(true). This can also
speedup uprobe_munmap() and uprobe_unregister().
Note: even after this patch _unregister can confuse the probed
application if it does mprotect(PROT_WRITE) after _register and
installs "int3", but this is hardly possible to avoid and this
doesn't differ from gdb case.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
uprobe_register() or uprobe_mmap() requires VM_READ | VM_EXEC, this
is not right. An apllication can do mprotect(PROT_EXEC) later and
execute this code.
Change valid_vma(is_register => true) to check VM_MAYEXEC instead.
No need to check VM_MAYREAD, it is always set.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
write_opcode()->get_user_pages() needs FOLL_FORCE to ensure we can
read the page even if the probed task did mprotect(PROT_NONE) after
uprobe_register(). Without FOLL_WRITE, FOLL_FORCE doesn't have any
side effect but allows to read the !VM_READ memory.
Otherwiese the subsequent uprobe_unregister()->set_orig_insn() fails
and we leak "int3". If that task does mprotect(PROT_READ | EXEC) and
execute the probed insn later it will be killed.
Note: in fact this is also needed for _register, see the next patch.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Kill UTASK_BP_HIT state, it buys nothing but complicates the code.
It is only used in uprobe_notify_resume() to decide who should be
called, we can check utask->active_uprobe != NULL instead. And this
allows us to simplify handle_swbp(), no need to clear utask->state.
Likewise we could kill UTASK_SSTEP, but UTASK_BP_HIT is worse and
imho should die. The problem is, it creates the special case when
task->utask is NULL, we can't distinguish RUNNING and BP_HIT. With
this patch utask == NULL always means RUNNING.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
If handle_swbp()->add_utask() fails but UPROBE_SKIP_SSTEP is set,
cleanup_ret: path do not restart the insn, this is wrong. Remove
this check and add the additional label for can_skip_sstep() = T
case.
Note also that UPROBE_SKIP_SSTEP can be false positive, we simply
can not trust it unless arch_uprobe_skip_sstep() was already called.
Also, move another UPROBE_SKIP_SSTEP check before can_skip_sstep()
into this helper, this looks more clean and understandable.
Note: probably we should rename "skip" to "emulate" and I think
that "clear UPROBE_SKIP_SSTEP" should be moved to arch_can_skip.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
handle_swbp() sets utask->active_uprobe before handler_chain(),
and UTASK_SSTEP before pre_ssout(). This complicates the code
for no reason, arch_ hooks or consumer->handler() should not
(and can't) use this info.
Change handle_swbp() to initialize them after pre_ssout(), and
remove the no longer needed cleanup-utask code.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
cked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
If handle_swbp()->find_active_uprobe() fails we return with
utask->state = UTASK_BP_HIT.
Change handle_swbp() to reset utask->state at the start. Note
that we do this unconditionally, see the next patch(es).
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
This patch splits trace event initialization in two stages:
* ftrace enable
* sysfs event entry creation
This allows to capture trace events from an earlier point
by using 'trace_event' kernel parameter and is important
to trace boot-up allocations.
Note that, in order to enable events at core_initcall,
it's necessary to move init_ftrace_syscalls() from
core_initcall to early_initcall.
Link: http://lkml.kernel.org/r/1347461277-25302-1-git-send-email-elezegarcia@gmail.com
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In our application, we have trace markers spread through user-space.
We have markers in GL, X, etc. These are super handy for Chrome's
about:tracing feature (Chrome + system + kernel trace view), but
can be very distracting when you're trying to debug a kernel issue.
I normally, use "grep -v tracing_mark_write" but it would be nice
if I could just temporarily disable markers all together.
Link: http://lkml.kernel.org/r/1347066739-26285-1-git-send-email-msb@chromium.org
CC: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As Oleg pointed out in [0] uprobe should not use the ptrace interface
for enabling/disabling single stepping.
[0] http://lkml.kernel.org/r/20120730141638.GA5306@redhat.com
Add the new "__weak arch" helpers which simply call user_*_single_step()
as a preparation. This is only needed to not break the powerpc port, we
will fold this logic into arch_uprobe_pre/post_xol() hooks later.
We should also change handle_singlestep(), _disable_step(&uprobe->arch)
should be called before put_uprobe().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
The wrong MMF_HAS_UPROBES doesn't really hurt, just it triggers
the "slow" and unnecessary handle_swbp() path if the task hits
the non-uprobe breakpoint.
So this patch changes find_active_uprobe() to check every valid
vma and clear MMF_HAS_UPROBES if no uprobes were found. This is
adds the slow O(n) path, but it is only called in unlikely case
when the task hits the normal breakpoint first time after
uprobe_unregister().
Note the "not strictly accurate" comment in mmf_recalc_uprobes().
We can fix this, we only need to teach vma_has_uprobes() to return
a bit more more info, but I am not sure this worth the trouble.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Add the new MMF_RECALC_UPROBES flag, it means that MMF_HAS_UPROBES
can be false positive after remove_breakpoint() or uprobe_munmap().
It is also set by uprobe_dup_mmap(), this is not optimal but simple.
We could add the new hook, uprobe_dup_vma(), to set MMF_HAS_UPROBES
only if the new mm actually has uprobes, but I don't think this
makes sense.
The next patch will use this flag to clear MMF_HAS_UPROBES.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Nobody plays with uprobes_tree/uprobes_treelock in interrupt context,
no need to disable irqs.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Fix kprobes/x86 to support jprobes on ftrace-based kprobes.
Because of -mfentry support of ftrace, ftrace is now put
on the beginning of function where jprobes are put.
Originally ftrace-based kprobes doesn't support jprobe
because it will change regs->ip and ftrace doesn't support
changing IP and ftrace itself doesn't conflict jprobe.
However, ftrace -mfentry support moves mcount call on the
top of functions where jprobes are put. This means that
jprobe always conflicts with ftrace-based kprobe and fails.
This patch allows ftrace-based kprobes to support jprobes
by allowing to modify regs->ip and kprobes breakpoint
handler also allows to skip singlestepping because there
is a ftrace call (not an original instruction).
Link: http://lkml.kernel.org/r/20120905143125.10329.90836.stgit@localhost.localdomain
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 56449f437 "tracing: make the trace clocks available generally",
in April 2009, made trace_clock available unconditionally, since
CONFIG_X86_DS used it too.
Commit faa4602e47 "x86, perf, bts, mm: Delete the never used BTS-ptrace code",
in March 2010, removed CONFIG_X86_DS, and now only CONFIG_RING_BUFFER (split
out from CONFIG_TRACING for general use) has a dependency on trace_clock. So,
only compile in trace_clock with CONFIG_RING_BUFFER or CONFIG_TRACING
enabled.
Link: http://lkml.kernel.org/r/20120903024513.GA19583@leaf
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steve Rostedt asked for the merge of a single commit, into both
the RCU and the perf/tracing tree:
| Josh made a change to the tracing code that affects both the
| work Paul McKenney and I are currently doing. At the last
| Kernel Summit back in August, Linus said when such a case
| exists, it is best to make a separate branch based off of his
| tree and place the change there. This way, the repositories
| that need to share the change can both pull them in and the
| SHA1 will match for both. Whichever branch is pulled in first
| by Linus will also pull in the necessary change for the other
| branch as well.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andreas Bombe reported that the added ktime_t overflow checking added to
timespec_valid in commit 4e8b14526c ("time: Improve sanity checking of
timekeeping inputs") was causing problems with X.org because it caused
timeouts larger then KTIME_T to be invalid.
Previously, these large timeouts would be clamped to KTIME_MAX and would
never expire, which is valid.
This patch splits the ktime_t overflow checking into a new
timespec_valid_strict function, and converts the timekeeping codes
internal checking to use this more strict function.
Reported-and-tested-by: Andreas Bombe <aeb@debian.org>
Cc: Zhouping Liu <zliu@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nobody does set_orig_insn(verify => false), and I think nobody will.
Remove this argument. IIUC set_orig_insn(verify => false) was needed
to single-step without xol area.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Now that we have uprobe_dup_mmap() we can fold uprobe_reset_state()
into the new hook and remove it. mmput()->uprobe_clear_state() can't
be called before dup_mmap().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Add the new MMF_HAS_UPROBES flag. It is set by install_breakpoint()
and it is copied by dup_mmap(), uprobe_pre_sstep_notifier() checks
it to avoid the slow path if the task was never probed. Perhaps it
makes sense to check it in valid_vma(is_register => false) as well.
This needs the new dup_mmap()->uprobe_dup_mmap() hook. We can't use
uprobe_reset_state() or put MMF_HAS_UPROBES into MMF_INIT_MASK, we
need oldmm->mmap_sem to avoid the race with uprobe_register() or
mmap() from another thread.
Currently we never clear this bit, it can be false-positive after
uprobe_unregister() or uprobe_munmap() or if dup_mmap() hits the
probed VM_DONTCOPY vma. But this is fine correctness-wise and has
no effect unless the task hits the non-uprobe breakpoint.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
-EEXIST from install_breakpoint() no longer makes sense, all
callers should simply treat it as "success". Change the code
to return zero and simplify register_for_each_vma().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Once install_breakpoint() fails uprobe_mmap() "ignores" all other
uprobes and returns the error.
It was never really needed to to stop after the first error, and
in fact it was always wrong at least in -ENOTSUPP case.
Change uprobe_mmap() to ignore the errors and always return 0.
This is not what we want in the long term, but until we teach
the callers to handle the failure it would be better to remove
the pointless complications. And this doesn't look too bad, the
only "reasonable" error is ENOMEM but in this case the caller
should be oom-killed in the likely case or the system has more
serious problems.
However it makes sense to stop if fatal_signal_pending() == T.
In particular this helps if the task was oom-killed.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
1. Kill dup_mmap()->uprobe_mmap(), it was only needed to calculate
new_mm->uprobes_state.count removed by the previous patch.
If the forking process has a pending uprobe (int3) in vma, it will
be copied by copy_page_range(), note that it checks vma->anon_vma
so "Don't copy ptes" is not possible after install_breakpoint()
which does anon_vma_prepare().
2. Remove is_swbp_at_addr() and "int count" in uprobe_mmap(). Again,
this was needed for uprobes_state.count.
As a side effect this fixes the bug pointed out by Srikar,
this code lacked the necessary put_uprobe().
3. uprobe_munmap() becomes a nop after the previous patch. Remove the
meaningless code but do not remove the helper, we will need it.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
uprobes_state->count is only needed to avoid the slow path in
uprobe_pre_sstep_notifier(). It is also checked in uprobe_munmap()
but ironically its only goal to decrement this counter. However,
it is very broken. Just some examples:
- uprobe_mmap() can race with uprobe_unregister() and wrongly
increment the counter if it hits the non-uprobe "int3". Note
that install_breakpoint() checks ->consumers first and returns
-EEXIST if it is NULL.
"atomic_sub() if error" in uprobe_mmap() looks obviously wrong
too.
- uprobe_munmap() can race with uprobe_register() and wrongly
decrement the counter by the same reason.
- Suppose an appication tries to increase the mmapped area via
sys_mremap(). vma_adjust() does uprobe_munmap(whole_vma) first,
this can nullify the counter temporarily and race with another
thread which can hit the bp, the application will be killed by
SIGTRAP.
- Suppose an application mmaps 2 consecutive areas in the same file
and one (or both) of these areas has uprobes. In the likely case
mmap_region()->vma_merge() suceeds. Like above, this leads to
uprobe_munmap/uprobe_mmap from vma_merge()->vma_adjust() but then
mmap_region() does another uprobe_mmap(resulting_vma) and doubles
the counter.
This patch only removes this counter and fixes the compile errors,
then we will try to cleanup the changed code and add something else
instead.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
by the time we get here (after we pass cleanup_ret) uprobe is always is
set. If it is NULL we leave very early in the code.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Since read_opcode() reads from the referenced page and doesnt modify
the page contents nor the page attributes, there is no need to lock
the page.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Pull timer fixes from Thomas Gleixner:
"Mostly small fixes for the fallout of the timekeeping overhaul in 3.6
along with stable fixes to address an accumulation problem and missing
sanity checks for RTC readouts and user space provided values."
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Avoid making adjustments if we haven't accumulated anything
time: Avoid potential shift overflow with large shift values
time: Fix casting issue in timekeeping_forward_now
time: Ensure we normalize the timekeeper in tk_xtime_add
time: Improve sanity checking of timekeeping inputs
The function graph has a test to check if the frame pointer is
corrupted, which can happen with various options of gcc with mcount.
But this is not an issue with -mfentry as -mfentry does not need nor use
frame pointers for function graph tracing.
Link: http://lkml.kernel.org/r/20120807194059.773895870@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Thanks to Andi Kleen, gcc 4.6.0 now supports -mfentry for x86
(and hopefully soon for other archs). What this does is to have
the function profiler start at the beginning of the function
instead of after the stack is set up. As plain -pg (mcount) is
called after the stack is set up, and in some cases can have issues
with the function graph tracer. It also requires frame pointers to
be enabled.
The -mfentry now calls __fentry__ at the beginning of the function.
This allows for compiling without frame pointers and even has the
ability to access parameters if needed.
If the architecture and the compiler both support -mfentry then
use that instead.
Link: http://lkml.kernel.org/r/20120807194059.392617243@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If update_wall_time() is called and the current offset isn't large
enough to accumulate, avoid re-calling timekeeping_adjust which may
change the clock freq and can cause 1ns inconsistencies with
CLOCK_REALTIME_COARSE/CLOCK_MONOTONIC_COARSE.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1345595449-34965-5-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andreas Schwab noticed that the 1 << tk->shift could overflow if the
shift value was greater than 30, since 1 would be a 32bit long on
32bit architectures. This issue was introduced by 1e75fa8be (time:
Condense timekeeper.xtime into xtime_sec)
Use 1ULL instead to ensure we don't overflow on the shift.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345595449-34965-4-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
arch_gettimeoffset returns a u32 value which when shifted by tk->shift
can overflow. This issue was introduced with 1e75fa8be (time: Condense
timekeeper.xtime into xtime_sec)
Cast it to u64 first.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345595449-34965-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andreas noticed problems with resume on specific hardware after commit
1e75fa8b (time: Condense timekeeper.xtime into xtime_sec) combined
with commit b44d50dca (time: Fix casting issue in tk_set_xtime and
tk_xtime_add)
After some digging I realized we aren't normalizing the timekeeper
after the add. Add the missing normalize call.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1345595449-34965-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
