Use the new devm_clk_get_enabled function to get our clock.
We don't have to disable and unprepare the clock ourselves any more in
error paths and in the remove function.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The lists of algothms checked for existence by
modprobe tcrypt mode=1000
generates three bogus errors:
modprobe tcrypt mode=1000
console log:
tcrypt: alg rot13 not found
tcrypt: alg cts not found
tcrypt: alg arc4 not found
rot13 is not an algorithm in the crypto API or tested.
cts is a wrapper, not a base algorithm.
arc4 is named ecb(arc4), not arc4.
Also, the list is missing numerous algorithms that are tested by
other test modes:
blake2b-512
blake2s-256
crct10dif
xxhash64
ghash
cast5
sm4
ansi_prng
Several of the algorithms are only available if
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is enabled:
arc4
khazad
seed
tea, xtea, xeta
Rather that fix that list, remove test mode=1000 entirely.
It seems to have limited utility, and a web search shows no
discussion of anybody using it.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CRYPTO_LIB_CHACHA_GENERIC doesn't need to select XOR_BLOCKS. It perhaps
was thought that it's needed for __crypto_xor, but that's not the case.
Enabling XOR_BLOCKS is problematic because the XOR_BLOCKS code runs a
benchmark when it is initialized. That causes a boot time regression on
systems that didn't have it enabled before.
Therefore, remove this unnecessary and problematic selection.
Fixes: e56e189855 ("lib/crypto: add prompts back to crypto libraries")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This userspace command:
modprobe tcrypt
or
modprobe tcrypt mode=0
runs all the tcrypt test cases numbered <200 (i.e., all the
test cases calling tcrypt_test() and returning return values).
Tests are sparsely numbered from 0 to 1000. For example:
modprobe tcrypt mode=12
tests sha512, and
modprobe tcrypt mode=152
tests rfc4543(gcm(aes))) - AES-GCM as GMAC
The test manager generates WARNING crashdumps every time it attempts
a test using an algorithm that is not available (not built-in to the
kernel or available as a module):
alg: skcipher: failed to allocate transform for ecb(arc4): -2
------------[ cut here ]-----------
alg: self-tests for ecb(arc4) (ecb(arc4)) failed (rc=-2)
WARNING: CPU: 9 PID: 4618 at crypto/testmgr.c:5777
alg_test+0x30b/0x510
[50 more lines....]
---[ end trace 0000000000000000 ]---
If the kernel is compiled with CRYPTO_USER_API_ENABLE_OBSOLETE
disabled (the default), then these algorithms are not compiled into
the kernel or made into modules and trigger WARNINGs:
arc4 tea xtea khazad anubis xeta seed
Additionally, any other algorithms that are not enabled in .config
will generate WARNINGs. In RHEL 9.0, for example, the default
selection of algorithms leads to 16 WARNING dumps.
One attempt to fix this was by modifying tcrypt_test() to check
crypto_has_alg() and immediately return 0 if crypto_has_alg() fails,
rather than proceed and return a non-zero error value that causes
the caller (alg_test() in crypto/testmgr.c) to invoke WARN().
That knocks out too many algorithms, though; some combinations
like ctr(des3_ede) would work.
Instead, change the condition on the WARN to ignore a return
value is ENOENT, which is the value returned when the algorithm
or combination of algorithms doesn't exist. Add a pr_warn to
communicate that information in case the WARN is skipped.
This approach allows algorithm tests to work that are combinations,
not provided by one driver, like ctr(blowfish).
Result - no more WARNINGs:
modprobe tcrypt
[ 115.541765] tcrypt: testing md5
[ 115.556415] tcrypt: testing sha1
[ 115.570463] tcrypt: testing ecb(des)
[ 115.585303] cryptomgr: alg: skcipher: failed to allocate transform for ecb(des): -2
[ 115.593037] cryptomgr: alg: self-tests for ecb(des) using ecb(des) failed (rc=-2)
[ 115.593038] tcrypt: testing cbc(des)
[ 115.610641] cryptomgr: alg: skcipher: failed to allocate transform for cbc(des): -2
[ 115.618359] cryptomgr: alg: self-tests for cbc(des) using cbc(des) failed (rc=-2)
...
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
x86 optimized crypto modules built as modules rather than built-in
to the kernel end up as .ko files in the filesystem, e.g., in
/usr/lib/modules. If the filesystem itself is a module, these might
not be available when the crypto API is initialized, resulting in
the generic implementation being used (e.g., sha512_transform rather
than sha512_transform_avx2).
In one test case, CPU utilization in the sha512 function dropped
from 15.34% to 7.18% after forcing loading of the optimized module.
Add module aliases for this x86 optimized crypto module based on CPU
feature bits so udev gets a chance to load them later in the boot
process when the filesystems are all running.
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Data in the hardware cache needs to be written back to the memory
before the queue memory is released. Currently, the queue memory is
applied for when the driver is loaded and released when the driver is
removed. Therefore, the hardware cache does not need to be written back
when process puts queue.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The dump_show() is used to output hardware information for error locating.
It is not need to apply for memory to temporarily store the converted data.
It can directly output the data. Therefore, remove some unnecessary code.
Signed-off-by: Junchong Pan <panjunchong@hisilicon.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the function hisi_qm_memory_init(), if resource alloc fails after
idr_init, the initialized qp_idr needs to be destroyed.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some cleanup for code:
1. Change names for easy to understand.
2. Unify the variables type.
3. Use the right return value.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1.Remove some useless steps during doing requests.
2.Adjust the possibility of branch prediction.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acomp API supports NULL destination buffer for compression
and decompression requests. In such cases allocation is
performed by API.
Add test cases for crypto_acomp_compress() and crypto_acomp_decompress()
with dst buffer allocated by API.
Tests will only run if CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y.
Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
remove unnecessary void* type casting
v2:
Turn assignments less than 75 characters into one line.
Signed-off-by: Dong Chuanjian <chuanjian@nfschina.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A quirk for fixing the committed TCB version, when upgrading from a
firmware version earlier than 1.50. This is a known issue, and the
documented workaround is to load the firmware twice.
Currently, this issue requires the following workaround:
sudo modprobe -r kvm_amd
sudo modprobe -r ccp
sudo modprobe ccp
sudo modprobe kvm_amd
Implement this workaround inside kernel by checking whether the API
version is less than 1.50, and if so, download the firmware twice.
This addresses the TCB version issue.
Link: https://lore.kernel.org/all/de02389f-249d-f565-1136-4af3655fab2a@profian.com/
Reported-by: Harald Hoyer <harald@profian.com>
Signed-off-by: Jarkko Sakkinen <jarkko@profian.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Declan Murphy <declan.murphy@intel.com>
Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Cc: Mark Gross <mgross@linux.intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Prabhjot Khurana <prabhjot.khurana@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Calls to pci_cleanup_aer_uncorrect_error_status() have already been
removed after commit 62b36c3ea6 ("PCI/AER: Remove
pci_cleanup_aer_uncorrect_error_status() calls"). But in commit
6c6dd5802c ("crypto: hisilicon/qm - add controller reset interface")
pci_aer_clear_nonfatal_status() was used again, so remove it in
this patch.
note: pci_cleanup_aer_uncorrect_error_status() was renamed to
pci_aer_clear_nonfatal_status() in commit 894020fdd8
("PCI/AER: Rationalize error status register clearing")
Signed-off-by: Zhuo Chen <chenzhuo.1@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SMCCC_RET_TRNG_NO_ENTROPY switch arm is never used because the
NO_ENTROPY return value is negative and negative values are handled
above the switch by immediately returning.
Fix by handling errors using a default arm in the switch.
Fixes: 0888d04b47 ("hwrng: Add Arm SMCCC TRNG based driver")
Signed-off-by: James Cowgill <james.cowgill@blaize.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Module device tables need to be declared as maybe_unused because
they will be unused when built-in and the corresponding option is
also disabled.
This patch adds the maybe_unused attributes to OF and ACPI. This
also allows us to remove the ifdef around the ACPI data structure.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
KASAN reported this Bug:
[17619.659757] BUG: KASAN: global-out-of-bounds in param_get_int+0x34/0x60
[17619.673193] Read of size 4 at addr fffff01332d7ed00 by task read_all/1507958
...
[17619.698934] The buggy address belongs to the variable:
[17619.708371] sgl_sge_nr+0x0/0xffffffffffffa300 [hisi_zip]
There is a mismatch in hisi_zip when get/set the variable sgl_sge_nr.
The type of sgl_sge_nr is u16, and get/set sgl_sge_nr by
param_get/set_int.
Replacing param_get/set_int to param_get/set_ushort can fix this bug.
Fixes: f081fda293 ("crypto: hisilicon - add sgl_sge_nr module param for zip")
Signed-off-by: Ye Weihua <yeweihua4@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CRYPTO_LIB_CHACHA depends on CRYPTO for __crypto_xor, defined in
crypto/algapi.c. This is a layering violation because the dependencies
should only go in the other direction (crypto/ => lib/crypto/). Also
the correct dependency would be CRYPTO_ALGAPI, not CRYPTO. Fix this by
moving __crypto_xor into the utils module in lib/crypto/.
Note that CRYPTO_LIB_CHACHA_GENERIC selected XOR_BLOCKS, which is
unrelated and unnecessary. It was perhaps thought that XOR_BLOCKS was
needed for __crypto_xor, but that's not the case.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As requested at
https://lore.kernel.org/r/YtEgzHuuMts0YBCz@gondor.apana.org.au, move
__crypto_memneq into lib/crypto/ and put it under a new tristate. The
tristate is CRYPTO_LIB_UTILS, and it builds a module libcryptoutils. As
more crypto library utilities are being added, this creates a single
place for them to go without cluttering up the main lib directory.
The module's main file will be lib/crypto/utils.c. However, leave
memneq.c as its own file because of its nonstandard license.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function qat_uclo_check_image() validates the MMP and AE firmware
images. If the QAT device supports firmware authentication (indicated
by the handle to firmware loader), the input signed binary MMP and AE
images are validated by parsing the following information:
- Header length
- Full size of the binary
- Type of binary image (MMP or AE Firmware)
Firmware binaries use RSA3K for signing and verification.
The header length for the RSA3k is 0x384 bytes.
All the size field values in the binary are quantified
as DWORDS (1 DWORD = 4bytes).
On an invalid value the function prints an error message and returns
with an error code "EINVAL".
Signed-off-by: Srinivas Kerekare <srinivas.kerekare@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Function of sahara_aes_crypt maybe could be called by function
of crypto_skcipher_encrypt during the rx softirq, so it is not
allowed to use mutex lock.
Fixes: c0c3c89ae3 ("crypto: sahara - replace tasklets with...")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
have gfp_types.h for this.
Fixes powerpc allmodconfig build:
In file included from include/linux/nodemask.h:97,
from include/linux/mmzone.h:17,
from include/linux/gfp.h:7,
from include/linux/radix-tree.h:12,
from include/linux/idr.h:15,
from include/linux/kernfs.h:12,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/pci.h:35,
from arch/powerpc/kernel/prom_init.c:24:
include/linux/random.h: In function 'add_latent_entropy':
>> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
| ^~~~~~~~~~~~~~
| add_latent_entropy
include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <lkp@intel.com>
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs lseek fix from Al Viro:
"Fix proc_reg_llseek() breakage. Always had been possible if somebody
left NULL ->proc_lseek, became a practical issue now"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
take care to handle NULL ->proc_lseek()
Easily done now, just by clearing FMODE_LSEEK in ->f_mode
during proc_reg_open() for such entries.
Fixes: 868941b144 "fs: remove no_llseek"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull more xen updates from Juergen Gross:
- fix the handling of the "persistent grants" feature negotiation
between Xen blkfront and Xen blkback drivers
- a cleanup of xen.config and adding xen.config to Xen section in
MAINTAINERS
- support HVMOP_set_evtchn_upcall_vector, which is more compliant to
"normal" interrupt handling than the global callback used up to now
- further small cleanups
* tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections
xen: remove XEN_SCRUB_PAGES in xen.config
xen/pciback: Fix comment typo
xen/xenbus: fix return type in xenbus_file_read()
xen-blkfront: Apply 'feature_persistent' parameter when connect
xen-blkback: Apply 'feature_persistent' parameter when connect
xen-blkback: fix persistent grants negotiation
x86/xen: Add support for HVMOP_set_evtchn_upcall_vector
Pull more perf tool updates from Arnaldo Carvalho de Melo:
- 'perf c2c' now supports ARM64, adjust its output to cope with
differences with what is in x86_64. Now go find false sharing on
ARM64 (at least Neoverse) as well!
- Refactor the JSON processing, making the output more compact and thus
reducing the size of the resulting perf binary
- Improvements for 'perf offcpu' profiling, including tracking child
processes
- Update Intel JSON metrics and events files for broadwellde,
broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown,
knightslanding, sapphirerapids, skylakex and snowridgex
- Add 'perf stat' JSON output and a 'perf test' entry for it
- Ignore memfd and anonymous mmap events if jitdump present
- Refactor 'perf test' shell tests allowing subdirs
- Fix an error handling path in 'parse_perf_probe_command()'
- Fixes for the guest Intel PT tracing patchkit in the 1st batch of
this merge window
- Print debuginfod queries if -v option is used, to explain delays in
processing when debuginfo servers are enabled to fetch DSOs with
richer symbol tables
- Improve error message for 'perf record -p not_existing_pid'
- Fix openssl and libbpf feature detection
- Add PMU pai_crypto event description for IBM z16 on 'perf list'
- Fix typos and duplicated words on comments in various places
* tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits)
perf test: Refactor shell tests allowing subdirs
perf vendor events: Update events for snowridgex
perf vendor events: Update events and metrics for skylakex
perf vendor events: Update metrics for sapphirerapids
perf vendor events: Update events for knightslanding
perf vendor events: Update metrics for jaketown
perf vendor events: Update metrics for ivytown
perf vendor events: Update events and metrics for icelakex
perf vendor events: Update events and metrics for haswellx
perf vendor events: Update events and metrics for cascadelakex
perf vendor events: Update events and metrics for broadwellx
perf vendor events: Update metrics for broadwellde
perf jevents: Fold strings optimization
perf jevents: Compress the pmu_events_table
perf metrics: Copy entire pmu_event in find metric
perf pmu-events: Hide the pmu_events
perf pmu-events: Don't assume pmu_event is an array
perf pmu-events: Move test events/metrics to JSON
perf test: Use full metric resolution
perf pmu-events: Hide pmu_events_map
...
Pull powerpc fixes from Michael Ellerman:
- Ensure we never emit lwarx with EH=1 on 32-bit, because some 32-bit
CPUs trap on it rather than ignoring it as they should.
- Fix ftrace when building with clang, which was broken by some
refactoring.
- A couple of other minor fixes.
Thanks to Christophe Leroy, Naveen N. Rao, Nick Desaulniers, Ondrej
Mosnacek, Pali Rohár, Russell Currey, and Segher Boessenkool.
* tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kexec: Fix build failure from uninitialised variable
powerpc/ppc-opcode: Fix PPC_RAW_TW()
powerpc64/ftrace: Fix ftrace for clang builds
powerpc: Make eh value more explicit when using lwarx
powerpc: Don't hide eh field of lwarx behind a macro
powerpc: Fix eh field when calling lwarx on PPC32
Pull /proc/mounts fix from Al Viro:
"Fix for /proc/mounts escaping - escape the '#' character too"
* tag 'pull-work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: escape hash as well
Pull more cifs updates from Steve French:
- two fixes for stable, one for a lock length miscalculation, and
another fixes a lease break timeout bug
- improvement to handle leases, allows the close timeout to be
configured more safely
- five restructuring/cleanup patches
* tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not access tcon->cfids->cfid directly from is_path_accessible
cifs: Add constructor/destructors for tcon->cfid
SMB3: fix lease break timeout when multiple deferred close handles for the same file.
smb3: allow deferred close timeout to be configurable
cifs: Do not use tcon->cfid directly, use the cfid we get from open_cached_dir
cifs: Move cached-dir functions into a separate file
cifs: Remove {cifs,nfs}_fscache_release_page()
cifs: fix lock length calculation
Enable multipage folio support for the afs filesystem.
Support has already been implemented in netfslib, fscache and cachefiles
and in most of afs, but I've waited for Matthew Wilcox's latest folio
changes.
Note that it does require a change to afs_write_begin() to return the
correct subpage. This is a "temporary" change as we're working on
getting rid of the need for ->write_begin() and ->write_end()
completely, at least as far as network filesystems are concerned - but
it doesn't prevent afs from making use of the capability.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: kafs-testing@auristor.com
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/lkml/2274528.1645833226@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull timer fixes from Ingo Molnar:
"Misc timer fixes:
- fix a potential use-after-free bug in posix timers
- correct a prototype
- address a build warning"
* tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Cleanup CPU timers before freeing them during exec
time: Correct the prototype of ns_to_kernel_old_timeval and ns_to_timespec64
posix-timers: Make do_clock_gettime() static
Pull x86 fix from Ingo Molnar:
"Fix the 'IBPB mitigated RETBleed' mode of operation on AMD CPUs (not
turned on by default), which also need STIBP enabled (if available) to
be '100% safe' on even the shortest speculation windows"
* tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Enable STIBP for IBPB mitigated RETBleed
Pull NTB updates from Jon Mason:
"Non-Transparent Bridge updates.
Fix of heap data and clang warnings, support for a new Intel NTB
device, and NTB EndPoint Function (EPF) support and the various fixes
for that"
* tag 'ntb-5.20' of https://github.com/jonmason/ntb:
MAINTAINERS: add PCI Endpoint NTB drivers to NTB files
NTB: EPF: Tidy up some bounds checks
NTB: EPF: Fix error code in epf_ntb_bind()
PCI: endpoint: pci-epf-vntb: reduce several globals to statics
PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()
PCI: endpoint: Fix Kconfig dependency
NTB: EPF: set pointer addr to null using NULL rather than 0
Documentation: PCI: extend subheading underline for "lspci output" section
Documentation: PCI: Use code-block block for scratchpad registers diagram
Documentation: PCI: Add specification for the PCI vNTB function device
PCI: endpoint: Support NTB transfer between RC and EP
NTB: epf: Allow more flexibility in the memory BAR map method
PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address
ntb: intel: add GNR support for Intel PCIe gen5 NTB
NTB: ntb_tool: uninitialized heap data in tool_fn_write()
ntb: idt: fix clang -Wformat warnings
Pull more xfs updates from Darrick Wong:
"There's not a lot this time around, just the usual bug fixes and
corrections for missing error returns.
- Return error codes from block device flushes to userspace
- Fix a deadlock between reclaim and mount time quotacheck
- Fix an unnecessary ENOSPC return when doing COW on a filesystem
with severe free space fragmentation
- Fix a miscalculation in the transaction reservation computations
for file removal operations"
* tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix inode reservation space for removing transaction
xfs: Fix false ENOSPC when performing direct write on a delalloc extent in cow fork
xfs: fix intermittent hang during quotacheck
xfs: check return codes when flushing block devices
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and trivial updates.
The major new core update is a change to the way device, target and
host reference counting is done to try to make it more robust (this
change has soaked for a while to try to winkle out any bugs)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pm8001: Fix typo 'the the' in comment
scsi: megaraid_sas: Remove redundant variable cmd_type
scsi: FlashPoint: Remove redundant variable bm_int_st
scsi: zfcp: Fix missing auto port scan and thus missing target ports
scsi: core: Call blk_mq_free_tag_set() earlier
scsi: core: Simplify LLD module reference counting
scsi: core: Make sure that hosts outlive targets
scsi: core: Make sure that targets outlive devices
scsi: ufs: ufs-pci: Correct check for RESET DSM
scsi: target: core: De-RCU of se_lun and se_lun acl
scsi: target: core: Fix race during ACL removal
scsi: ufs: core: Correct ufshcd_shutdown() flow
scsi: ufs: core: Increase the maximum data buffer size
scsi: lpfc: Check the return value of alloc_workqueue()
Pull block fixes from Jens Axboe:
- NVMe pull request
- print nvme connect Linux error codes properly (Amit Engel)
- fix the fc_appid_store return value (Christoph Hellwig)
- fix a typo in an error message (Christophe JAILLET)
- add another non-unique identifier quirk (Dennis P. Kliem)
- check if the queue is allocated before stopping it in nvme-tcp
(Maurizio Lombardi)
- restart admin queue if the caller needs to restart queue in
nvme-fc (Ming Lei)
- use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang
Xiaoxu)
- __alloc_disk_node() error handling fix (Rafael)
* tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block:
block: Do not call blk_put_queue() if gendisk allocation fails
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70
nvme-tcp: check if the queue is allocated before stopping it
nvme-fabrics: Fix a typo in an error message
nvme-fabrics: parse nvme connect Linux error codes
nvmet-auth: use kmemdup instead of kmalloc + memcpy
nvme-fc: fix the fc_appid_store return value
nvme-fc: restart admin queue if the caller needs to restart queue
Pull io_uring fixes from Jens Axboe:
- Regression fix for this merge window, fixing a wrong order of
arguments for io_req_set_res() for passthru (Dylan)
- Fix for the audit code leaking context memory (Peilin)
- Ensure that provided buffers are memcg accounted (Pavel)
- Correctly handle short zero-copy sends (Pavel)
- Sparse warning fixes for the recvmsg multishot command (Dylan)
- Error handling fix for passthru (Anuj)
- Remove randomization of struct kiocb fields, to avoid it growing in
size if re-arranged in such a fashion that it grows more holes or
padding (Keith, Linus)
- Small series improving type safety of the sqe fields (Stefan)
* tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block:
io_uring: add missing BUILD_BUG_ON() checks for new io_uring_sqe fields
io_uring: make io_kiocb_to_cmd() typesafe
fs: don't randomize struct kiocb fields
io_uring: consistently make use of io_notif_to_data()
io_uring: fix error handling for io_uring_cmd
io_uring: fix io_recvmsg_prep_multishot sparse warnings
io_uring/net: send retry for zerocopy
io_uring: mem-account pbuf buckets
audit, io_uring, io-wq: Fix memory leak in io_sq_thread() and io_wqe_worker()
io_uring: pass correct parameters to io_req_set_res
This is a prelude to adding more tests to shell tests and in order to
support putting those tests into subdirectories, I need to change the
test code that scans/finds and runs them.
To support subdirs I have to recurse so it's time to refactor the code
to allow this and centralize the shell script finding into one location
and only one single scan that builds a list of all the found tests in
memory instead of it being duplicated in 3 places.
This code also optimizes things like knowing the max width of desciption
strings (as we can do that while we scan instead of a whole new pass of
opening files).
It also more cleanly filters scripts to see only *.sh files thus
skipping random other files in directories like *~ backup files, other
random junk/data files that may appear and the scripts must be
executable to make the cut (this ensures the script lib dir is not seen
as scripts to run).
This avoids perf test running previous older versions of test scripts
that are editor backup files as well as skipping perf.data files that
may appear and so on.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220812121641.336465-2-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
