Commit Graph

196 Commits

Author SHA1 Message Date
Andrew Morton
ca1cab37d9 workqueues: s/ON_STACK/ONSTACK/
Silly though it is, completions and wait_queue_heads use foo_ONSTACK
(COMPLETION_INITIALIZER_ONSTACK, DECLARE_COMPLETION_ONSTACK,
__WAIT_QUEUE_HEAD_INIT_ONSTACK and DECLARE_WAIT_QUEUE_HEAD_ONSTACK) so I
guess workqueues should do the same thing.

s/INIT_WORK_ON_STACK/INIT_WORK_ONSTACK/
s/INIT_DELAYED_WORK_ON_STACK/INIT_DELAYED_WORK_ONSTACK/

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:14 -07:00
David Howells
5260562754 MN10300: Fix the PERCPU() alignment to allow for workqueues
In the MN10300 arch, we occasionally see an assertion being tripped in
alloc_cwqs() at the following line:

        /* just in case, make sure it's actually aligned */
  --->  BUG_ON(!IS_ALIGNED(wq->cpu_wq.v, align));
        return wq->cpu_wq.v ? 0 : -ENOMEM;

The values are:

        wa->cpu_wq.v => 0x902776e0
        align => 0x100

and align is calculated by the following:

        const size_t align = max_t(size_t, 1 << WORK_STRUCT_FLAG_BITS,
                                   __alignof__(unsigned long long));

This is because the pointer in question (wq->cpu_wq.v) loses some of its
lower bits to control flags, and so the object it points to must be
sufficiently aligned to avoid the need to use those bits for pointing to
things.

Currently, 4 control bits and 4 colour bits are used in normal
circumstances, plus a debugging bit if debugging is set.  This requires
the cpu_workqueue_struct struct to be at least 256 bytes aligned (or 512
bytes aligned with debugging).

PERCPU() alignment on MN13000, however, is only 32 bytes as set in
vmlinux.lds.S.  So we set this to PAGE_SIZE (4096) to match most other
arches and stick a comment in alloc_cwqs() for anyone else who triggers
the assertion.

Reported-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mark Salter <msalter@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25 16:24:06 -07:00
Tejun Heo
daaae6b010 workqueue: remove in_workqueue_context()
Commit a25909a4 (lockdep: Add an in_workqueue_context() lockdep-based
test function) added in_workqueue_context() but there hasn't been any
in-kernel user and the lockdep annotation in workqueue is scheduled to
change.  Remove the unused function.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-10-19 11:28:15 +02:00
Tejun Heo
31ddd871fc workqueue: Clarify that schedule_on_each_cpu is synchronous
The documentation for schedule_on_each_cpu() states that it calls a
function on each online CPU from keventd.  This can easily be
interpreted as an asyncronous call because the description does not
mention that flush_work is called.  Clarify that it is synchronous.

tj: rephrased a bit

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-10-19 11:14:49 +02:00
Tejun Heo
6370a6ad3b workqueue: add and use WQ_MEM_RECLAIM flag
Add WQ_MEM_RECLAIM flag which currently maps to WQ_RESCUER, mark
WQ_RESCUER as internal and replace all external WQ_RESCUER usages to
WQ_MEM_RECLAIM.

This makes the API users express the intent of the workqueue instead
of indicating the internal mechanism used to guarantee forward
progress.  This is also to make it cleaner to add more semantics to
WQ_MEM_RECLAIM.  For example, if deemed necessary, memory reclaim
workqueues can be made highpri.

This patch doesn't introduce any functional change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
2010-10-11 15:20:26 +02:00
Tejun Heo
30310045dd workqueue: fix HIGHPRI handling in keep_working()
The policy function keep_working() didn't check GCWQ_HIGHPRI_PENDING
and could return %false with highpri work pending.  This could lead to
late execution of a highpri work which was delayed due to @max_active
throttling if other works are actively consuming CPU cycles.

For example, the following could happen.

1. Work W0 which burns CPU cycles.

2. Two works W1 and W2 are queued to a highpri wq w/ @max_active of 1.

3. W1 starts executing and W2 is put to delayed queue.  W0 and W1 are
   both runnable.

4. W1 finishes which puts W2 to pending queue but keep_working()
   incorrectly returns %false and the worker goes to sleep.

5. W0 finishes and W2 starts execution.

With this patch applied, W2 starts execution as soon as W1 finishes.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-10-11 12:09:30 +02:00
Tejun Heo
cdadf0097c workqueue: add queue_work and activate_work trace points
These two tracepoints allow tracking when and how a work is queued and
activated.  This patch is based on Frederic's patch to add queue_work
trace point.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
2010-10-05 10:49:55 +02:00
Tejun Heo
97bd234701 workqueue: prepare for more tracepoints
Define workqueue_work event class and use it for workqueue_execute_end
trace point.  Also, move trace/events/workqueue.h include downwards
such that all struct definitions are visible to it.  This is to
prepare for more tracepoints and doesn't cause any functional change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
2010-10-05 10:41:14 +02:00
Tejun Heo
09383498c5 workqueue: implement flush[_delayed]_work_sync()
Implement flush[_delayed]_work_sync().  These are flush functions
which also make sure no CPU is still executing the target work from
earlier queueing instances.  These are similar to
cancel[_delayed]_work_sync() except that the target work item is
flushed instead of cancelled.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-09-19 17:51:05 +02:00
Tejun Heo
baf59022c3 workqueue: factor out start_flush_work()
Factor out start_flush_work() from flush_work().  start_flush_work()
has @wait_executing argument which controls whether the barrier is
queued only if the work is pending or also if executing.  As
flush_work() needs to wait for execution too, it uses %true.

This commit doesn't cause any behavior difference.  start_flush_work()
will be used to implement flush_work_sync().

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-09-19 17:51:05 +02:00
Tejun Heo
401a8d048e workqueue: cleanup flush/cancel functions
Make the following cleanup changes.

* Relocate flush/cancel function prototypes and definitions.

* Relocate wait_on_cpu_work() and wait_on_work() before
  try_to_grab_pending().  These will be used to implement
  flush_work_sync().

* Make all flush/cancel functions return bool instead of int.

* Update wait_on_cpu_work() and wait_on_work() to return %true if they
  actually waited.

* Add / update comments.

This patch doesn't cause any functional changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-09-19 17:51:05 +02:00
Tejun Heo
c54fce6eff workqueue: add documentation
Update copyright notice and add Documentation/workqueue.txt.

Randy Dunlap, Dave Chinner: misc fixes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-By: Florian Mickler <florian@mickler.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
2010-09-13 10:26:52 +02:00
Linus Torvalds
cd4d4fc413 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: use zalloc_cpumask_var() for gcwq->mayday_mask
  workqueue: fix GCWQ_DISASSOCIATED initialization
  workqueue: Add a workqueue chapter to the tracepoint docbook
  workqueue: fix cwq->nr_active underflow
  workqueue: improve destroy_workqueue() debuggability
  workqueue: mark lock acquisition on worker_maybe_bind_and_lock()
  workqueue: annotate lock context change
  workqueue: free rescuer on destroy_workqueue
2010-09-07 14:08:17 -07:00
Tejun Heo
9c37547ab6 workqueue: use zalloc_cpumask_var() for gcwq->mayday_mask
alloc_mayday_mask() was using alloc_cpumask_var() making
gcwq->mayday_mask contain garbage after initialization on
CONFIG_CPUMASK_OFFSTACK=y configurations.  This combined with the
previously fixed GCWQ_DISASSOCIATED initialization bug could make
rescuers fall into infinite loop trying to bind to an offline cpu.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: CAI Qian <caiqian@redhat.com>
2010-08-31 11:18:34 +02:00
Tejun Heo
477a3c33d1 workqueue: fix GCWQ_DISASSOCIATED initialization
init_workqueues() incorrectly marks workqueues for all possible CPUs
associated.  Combined with mayday_mask initialization bug, this can
make rescuers keep trying to bind to an offline gcwq indefinitely.
Fix init_workqueues() such that only online CPUs have their gcwqs have
GCWQ_DISASSOCIATED cleared.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: CAI Qian <caiqian@redhat.com>
2010-08-31 10:54:35 +02:00
Tejun Heo
8a2e8e5dec workqueue: fix cwq->nr_active underflow
cwq->nr_active is used to keep track of how many work items are active
for the cpu workqueue, where 'active' is defined as either pending on
global worklist or executing.  This is used to implement the
max_active limit and workqueue freezing.  If a work item is queued
after nr_active has already reached max_active, the work item doesn't
increment nr_active and is put on the delayed queue and gets activated
later as previous active work items retire.

try_to_grab_pending() which is used in the cancellation path
unconditionally decremented nr_active whether the work item being
cancelled is currently active or delayed, so cancelling a delayed work
item makes nr_active underflow.  This breaks max_active enforcement
and triggers BUG_ON() in destroy_workqueue() later on.

This patch fixes this bug by adding a flag WORK_STRUCT_DELAYED, which
is set while a work item in on the delayed list and making
try_to_grab_pending() decrement nr_active iff the work item is
currently active.

The addition of the flag enlarges cwq alignment to 256 bytes which is
getting a bit too large.  It's scheduled to be reduced back to 128
bytes by merging WORK_STRUCT_PENDING and WORK_STRUCT_CWQ in the next
devel cycle.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Johannes Berg <johannes@sipsolutions.net>
2010-08-25 10:33:56 +02:00
Tejun Heo
e41e704bc4 workqueue: improve destroy_workqueue() debuggability
Now that the worklist is global, having works pending after wq
destruction can easily lead to oops and destroy_workqueue() have
several BUG_ON()s to catch these cases.  Unfortunately, BUG_ON()
doesn't tell much about how the work became pending after the final
flush_workqueue().

This patch adds WQ_DYING which is set before the final flush begins.
If a work is requested to be queued on a dying workqueue,
WARN_ON_ONCE() is triggered and the request is ignored.  This clearly
indicates which caller is trying to queue a work on a dying workqueue
and keeps the system working in most cases.

Locking rule comment is updated such that the 'I' rule includes
modifying the field from destruction path.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-08-24 18:01:32 +02:00
Namhyung Kim
972fa1c531 workqueue: mark lock acquisition on worker_maybe_bind_and_lock()
worker_maybe_bind_and_lock() actually grabs gcwq->lock but was missing proper
annotation. Add it. So this patch will remove following sparse warnings:

 kernel/workqueue.c:1214:13: warning: context imbalance in 'worker_maybe_bind_and_lock' - wrong count at exit
 arch/x86/include/asm/irqflags.h:44:9: warning: context imbalance in 'worker_rebind_fn' - unexpected unlock
 kernel/workqueue.c:1991:17: warning: context imbalance in 'rescuer_thread' - unexpected unlock

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-08-23 11:37:49 +02:00
Namhyung Kim
06bd6ebffa workqueue: annotate lock context change
Some of internal functions called within gcwq->lock context releases and
regrabs the lock but were missing proper annotations. Add it.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-08-23 11:37:49 +02:00
Arjan van de Ven
e36c886a0f workqueue: Add basic tracepoints to track workqueue execution
With the introduction of the new unified work queue thread pools,
we lost one feature: It's no longer possible to know which worker
is causing the CPU to wake out of idle. The result is that PowerTOP
now reports a lot of "kworker/a:b" instead of more readable results.

This patch adds a pair of tracepoints to the new workqueue code,
similar in style to the timer/hrtimer tracepoints.

With this pair of tracepoints, the next PowerTOP can correctly
report which work item caused the wakeup (and how long it took):

Interrupt (43)            i915      time   3.51ms    wakeups 141
Work      ieee80211_iface_work      time   0.81ms    wakeups  29
Work              do_dbs_timer      time   0.55ms    wakeups  24
Process                   Xorg      time  21.36ms    wakeups   4
Timer    sched_rt_period_timer      time   0.01ms    wakeups   1

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-21 13:19:37 -07:00
Xiaotian Feng
8d9df9f084 workqueue: free rescuer on destroy_workqueue
wq->rescuer is not freed when wq is destroyed, leads a memory leak
then. This patch also remove a redundant line.

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
2010-08-16 09:55:01 +02:00
Tejun Heo
f6500947a9 workqueue: workqueue_cpu_callback() should be cpu_notifier instead of hotcpu_notifier
Commit 6ee0578b (workqueue: mark init_workqueues as early_initcall)
made workqueue SMP initialization depend on workqueue_cpu_callback(),
which however was registered as hotcpu_notifier() and didn't get
called if CONFIG_HOTPLUG_CPU is not set.  This made gcwqs on non-boot
CPUs not create their initial workers leading to boot failures.  Fix
it by making it a cpu_notifier.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-bisected-by: walt <w41ter@gmail.com>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
2010-08-09 11:50:34 +02:00
Namhyung Kim
38f5156800 workqueue: add missing __percpu markup in kernel/workqueue.c
works in schecule_on_each_cpu() is a percpu pointer but was missing
__percpu markup.  Add it.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-08-08 14:24:09 +02:00
Linus Torvalds
3b7433b8a8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (55 commits)
  workqueue: mark init_workqueues() as early_initcall()
  workqueue: explain for_each_*cwq_cpu() iterators
  fscache: fix build on !CONFIG_SYSCTL
  slow-work: kill it
  gfs2: use workqueue instead of slow-work
  drm: use workqueue instead of slow-work
  cifs: use workqueue instead of slow-work
  fscache: drop references to slow-work
  fscache: convert operation to use workqueue instead of slow-work
  fscache: convert object to use workqueue instead of slow-work
  workqueue: fix how cpu number is stored in work->data
  workqueue: fix mayday_mask handling on UP
  workqueue: fix build problem on !CONFIG_SMP
  workqueue: fix locking in retry path of maybe_create_worker()
  async: use workqueue for worker pool
  workqueue: remove WQ_SINGLE_CPU and use WQ_UNBOUND instead
  workqueue: implement unbound workqueue
  workqueue: prepare for WQ_UNBOUND implementation
  libata: take advantage of cmwq and remove concurrency limitations
  workqueue: fix worker management invocation without pending works
  ...

Fixed up conflicts in fs/cifs/* as per Tejun. Other trivial conflicts in
include/linux/workqueue.h, kernel/trace/Kconfig and kernel/workqueue.c
2010-08-07 12:42:58 -07:00
Suresh Siddha
6ee0578b4d workqueue: mark init_workqueues() as early_initcall()
Mark init_workqueues() as early_initcall() and thus it will be initialized
before smp bringup. init_workqueues() registers for the hotcpu notifier
and thus it should cope with the processors that are brought online after
the workqueues are initialized.

x86 smp bringup code uses workqueues and uses a workaround for the
cold boot process (as the workqueues are initialized post smp_init()).
Marking init_workqueues() as early_initcall() will pave the way for
cleaning up this code.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
2010-08-01 13:05:29 +02:00
Tejun Heo
098849516d workqueue: explain for_each_*cwq_cpu() iterators
for_each_*cwq_cpu() are similar to regular CPU iterators except that
it also considers the pseudo CPU number used for unbound workqueues.
Explain them.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
2010-08-01 11:50:12 +02:00
Tejun Heo
e120153ddf workqueue: fix how cpu number is stored in work->data
Once a work starts execution, its data contains the cpu number it was
on instead of pointing to cwq.  This is added by commit 7a22ad75
(workqueue: carry cpu number in work data once execution starts) to
reliably determine the work was last on even if the workqueue itself
was destroyed inbetween.

Whether data points to a cwq or contains a cpu number was
distinguished by comparing the value against PAGE_OFFSET.  The
assumption was that a cpu number should be below PAGE_OFFSET while a
pointer to cwq should be above it.  However, on architectures which
use separate address spaces for user and kernel spaces, this doesn't
hold as PAGE_OFFSET is zero.

Fix it by using an explicit flag, WORK_STRUCT_CWQ, to mark what the
data field contains.  If the flag is set, it's pointing to a cwq;
otherwise, it contains a cpu number.

Reported on s390 and microblaze during linux-next testing.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Sachin Sant <sachinp@in.ibm.com>
Reported-by: Michal Simek <michal.simek@petalogix.com>
Reported-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Tested-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Tested-by: Michal Simek <monstr@monstr.eu>
2010-07-22 22:39:22 +02:00
Tejun Heo
f2e005aaff workqueue: fix mayday_mask handling on UP
All cpumasks are assumed to have cpu 0 permanently set on UP, so it
can't be used to signify whether there's something to be done for the
CPU.  workqueue was using cpumask to track which CPU requested rescuer
assistance and this led rescuer thread to think there always are
pending mayday requests on UP, which resulted in infinite busy loops.

This patch fixes the problem by introducing mayday_mask_t and
associated helpers which wrap cpumask on SMP and emulates its behavior
using bitops and unsigned long on UP.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
2010-07-20 15:59:09 +02:00
Tejun Heo
931ac77ef6 workqueue: fix build problem on !CONFIG_SMP
Commit f3421797 (workqueue: implement unbound workqueue) incorrectly
tested CONFIG_SMP as part of a C expression in alloc/free_cwqs().  As
CONFIG_SMP is not defined in UP, this breaks build.  Fix it by using

Found during linux-next build test.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
2010-07-20 11:15:14 +02:00
Tejun Heo
9f9c23644b workqueue: fix locking in retry path of maybe_create_worker()
maybe_create_worker() mismanaged locking when worker creation fails
and it has to retry.  Fix locking and simplify lock manipulation.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Yong Zhang <yong.zhang@windriver.com>
2010-07-14 11:31:20 +02:00
Tejun Heo
c7fc77f78f workqueue: remove WQ_SINGLE_CPU and use WQ_UNBOUND instead
WQ_SINGLE_CPU combined with @max_active of 1 is used to achieve full
ordering among works queued to a workqueue.  The same can be achieved
using WQ_UNBOUND as unbound workqueues always use the gcwq for
WORK_CPU_UNBOUND.  As @max_active is always one and benefits from cpu
locality isn't accessible anyway, serving them with unbound workqueues
should be fine.

Drop WQ_SINGLE_CPU support and use WQ_UNBOUND instead.  Note that most
single thread workqueue users will be converted to use multithread or
non-reentrant instead and only the ones which require strict ordering
will keep using WQ_UNBOUND + @max_active of 1.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-07-02 11:00:08 +02:00
Tejun Heo
f34217977d workqueue: implement unbound workqueue
This patch implements unbound workqueue which can be specified with
WQ_UNBOUND flag on creation.  An unbound workqueue has the following
properties.

* It uses a dedicated gcwq with a pseudo CPU number WORK_CPU_UNBOUND.
  This gcwq is always online and disassociated.

* Workers are not bound to any CPU and not concurrency managed.  Works
  are dispatched to workers as soon as possible and the only applied
  limitation is @max_active.  IOW, all unbound workqeueues are
  implicitly high priority.

Unbound workqueues can be used as simple execution context provider.
Contexts unbound to any cpu are served as soon as possible.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: David Howells <dhowells@redhat.com>
2010-07-02 11:00:02 +02:00
Tejun Heo
bdbc5dd7de workqueue: prepare for WQ_UNBOUND implementation
In preparation of WQ_UNBOUND addition, make the following changes.

* Add WORK_CPU_* constants for pseudo cpu id numbers used (currently
  only WORK_CPU_NONE) and use them instead of NR_CPUS.  This is to
  allow another pseudo cpu id for unbound cpu.

* Reorder WQ_* flags.

* Make workqueue_struct->cpu_wq a union which contains a percpu
  pointer, regular pointer and an unsigned long value and use
  kzalloc/kfree() in UP allocation path.  This will be used to
  implement unbound workqueues which will use only one cwq on SMPs.

* Move alloc_cwqs() allocation after initialization of wq fields, so
  that alloc_cwqs() has access to wq->flags.

* Trivial relocation of wq local variables in freeze functions.

These changes don't cause any functional change.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-07-02 10:59:57 +02:00
Tejun Heo
d313dd85ad workqueue: fix worker management invocation without pending works
When there's no pending work to do, worker_thread() goes back to sleep
after waking up without checking whether worker management is
necessary.  This means that idle worker exit requests can be ignored
if the gcwq stays empty.

Fix it by making worker_thread() always check whether worker
management is necessary before going to sleep.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-07-02 10:03:51 +02:00
Tejun Heo
a1e453d279 workqueue: fix incorrect cpu number BUG_ON() in get_work_gcwq()
get_work_gcwq() was incorrectly triggering BUG_ON() if cpu number is
equal to or higher than num_possible_cpus() instead of nr_cpu_ids.
Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-07-02 10:03:51 +02:00
Tejun Heo
4ce48b37bf workqueue: fix race condition in flush_workqueue()
When one flusher is cascading to the next flusher, it first sets
wq->first_flusher to the next one and sets up the next flush cycle.
If there's nothing to do for the next cycle, it clears
wq->flush_flusher and proceeds to the one after that.

If the woken up flusher checks wq->first_flusher before it gets
cleared, it will incorrectly assume the role of the first flusher,
which triggers BUG_ON() sanity check.

Fix it by checking wq->first_flusher again after grabbing the mutex.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-07-02 10:03:51 +02:00
Tejun Heo
cb44476699 workqueue: use worker_set/clr_flags() only from worker itself
worker_set/clr_flags() assume that if none of NOT_RUNNING flags is set
the worker must be contributing to nr_running which is only true if
the worker is actually running.

As when called from self, it is guaranteed that the worker is running,
those functions can be safely used from the worker itself and they
aren't necessary from other places anyway.  Make the following changes
to fix the bug.

* Make worker_set/clr_flags() whine if not called from self.

* Convert all places which called those functions from other tasks to
  manipulate flags directly.

* Make trustee_thread() directly clear nr_running after setting
  WORKER_ROGUE on all workers.  This is the only place where
  nr_running manipulation is necessary outside of workers themselves.

* While at it, add sanity check for nr_running in worker_enter_idle().

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-07-02 10:03:50 +02:00
Tejun Heo
fb0e7beb5c workqueue: implement cpu intensive workqueue
This patch implements cpu intensive workqueue which can be specified
with WQ_CPU_INTENSIVE flag on creation.  Works queued to a cpu
intensive workqueue don't participate in concurrency management.  IOW,
it doesn't contribute to gcwq->nr_running and thus doesn't delay
excution of other works.

Note that although cpu intensive works won't delay other works, they
can be delayed by other works.  Combine with WQ_HIGHPRI to avoid being
delayed by other works too.

As the name suggests this is useful when using workqueue for cpu
intensive works.  Workers executing cpu intensive works are not
considered for workqueue concurrency management and left for the
scheduler to manage.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
2010-06-29 10:07:15 +02:00
Tejun Heo
649027d73a workqueue: implement high priority workqueue
This patch implements high priority workqueue which can be specified
with WQ_HIGHPRI flag on creation.  A high priority workqueue has the
following properties.

* A work queued to it is queued at the head of the worklist of the
  respective gcwq after other highpri works, while normal works are
  always appended at the end.

* As long as there are highpri works on gcwq->worklist,
  [__]need_more_worker() remains %true and process_one_work() wakes up
  another worker before it start executing a work.

The above two properties guarantee that works queued to high priority
workqueues are dispatched to workers and start execution as soon as
possible regardless of the state of other works.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
2010-06-29 10:07:14 +02:00
Tejun Heo
dcd989cb73 workqueue: implement several utility APIs
Implement the following utility APIs.

 workqueue_set_max_active()	: adjust max_active of a wq
 workqueue_congested()		: test whether a wq is contested
 work_cpu()			: determine the last / current cpu of a work
 work_busy()			: query whether a work is busy

* Anton Blanchard fixed missing ret initialization in work_busy().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Anton Blanchard <anton@samba.org>
2010-06-29 10:07:14 +02:00
Tejun Heo
d320c03830 workqueue: s/__create_workqueue()/alloc_workqueue()/, and add system workqueues
This patch makes changes to make new workqueue features available to
its users.

* Now that workqueue is more featureful, there should be a public
  workqueue creation function which takes paramters to control them.
  Rename __create_workqueue() to alloc_workqueue() and make 0
  max_active mean WQ_DFL_ACTIVE.  In the long run, all
  create_workqueue_*() will be converted over to alloc_workqueue().

* To further unify access interface, rename keventd_wq to system_wq
  and export it.

* Add system_long_wq and system_nrt_wq.  The former is to host long
  running works separately (so that flush_scheduled_work() dosen't
  take so long) and the latter guarantees any queued work item is
  never executed in parallel by multiple CPUs.  These will be used by
  future patches to update workqueue users.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-06-29 10:07:14 +02:00
Tejun Heo
b71ab8c202 workqueue: increase max_active of keventd and kill current_is_keventd()
Define WQ_MAX_ACTIVE and create keventd with max_active set to half of
it which means that keventd now can process upto WQ_MAX_ACTIVE / 2 - 1
works concurrently.  Unless some combination can result in dependency
loop longer than max_active, deadlock won't happen and thus it's
unnecessary to check whether current_is_keventd() before trying to
schedule a work.  Kill current_is_keventd().

(Lockdep annotations are broken.  We need lock_map_acquire_read_norecurse())

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
2010-06-29 10:07:14 +02:00
Tejun Heo
e22bee782b workqueue: implement concurrency managed dynamic worker pool
Instead of creating a worker for each cwq and putting it into the
shared pool, manage per-cpu workers dynamically.

Works aren't supposed to be cpu cycle hogs and maintaining just enough
concurrency to prevent work processing from stalling due to lack of
processing context is optimal.  gcwq keeps the number of concurrent
active workers to minimum but no less.  As long as there's one or more
running workers on the cpu, no new worker is scheduled so that works
can be processed in batch as much as possible but when the last
running worker blocks, gcwq immediately schedules new worker so that
the cpu doesn't sit idle while there are works to be processed.

gcwq always keeps at least single idle worker around.  When a new
worker is necessary and the worker is the last idle one, the worker
assumes the role of "manager" and manages the worker pool -
ie. creates another worker.  Forward-progress is guaranteed by having
dedicated rescue workers for workqueues which may be necessary while
creating a new worker.  When the manager is having problem creating a
new worker, mayday timer activates and rescue workers are summoned to
the cpu and execute works which might be necessary to create new
workers.

Trustee is expanded to serve the role of manager while a CPU is being
taken down and stays down.  As no new works are supposed to be queued
on a dead cpu, it just needs to drain all the existing ones.  Trustee
continues to try to create new workers and summon rescuers as long as
there are pending works.  If the CPU is brought back up while the
trustee is still trying to drain the gcwq from the previous offlining,
the trustee will kill all idles ones and tell workers which are still
busy to rebind to the cpu, and pass control over to gcwq which assumes
the manager role as necessary.

Concurrency managed worker pool reduces the number of workers
drastically.  Only workers which are necessary to keep the processing
going are created and kept.  Also, it reduces cache footprint by
avoiding unnecessarily switching contexts between different workers.

Please note that this patch does not increase max_active of any
workqueue.  All workqueues can still only process one work per cpu.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-06-29 10:07:14 +02:00
Tejun Heo
d302f01782 workqueue: implement worker_{set|clr}_flags()
Implement worker_{set|clr}_flags() to manipulate worker flags.  These
are currently simple wrappers but logics to track the current worker
state and the current level of concurrency will be added.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-06-29 10:07:13 +02:00
Tejun Heo
7e11629d0e workqueue: use shared worklist and pool all workers per cpu
Use gcwq->worklist instead of cwq->worklist and break the strict
association between a cwq and its worker.  All works queued on a cpu
are queued on gcwq->worklist and processed by any available worker on
the gcwq.

As there no longer is strict association between a cwq and its worker,
whether a work is executing can now only be determined by calling
[__]find_worker_executing_work().

After this change, the only association between a cwq and its worker
is that a cwq puts a worker into shared worker pool on creation and
kills it on destruction.  As all workqueues are still limited to
max_active of one, this means that there are always at least as many
workers as active works and thus there's no danger for deadlock.

The break of strong association between cwqs and workers requires
somewhat clumsy changes to current_is_keventd() and
destroy_workqueue().  Dynamic worker pool management will remove both
clumsy changes.  current_is_keventd() won't be necessary at all as the
only reason it exists is to avoid queueing a work from a work which
will be allowed just fine.  The clumsy part of destroy_workqueue() is
added because a worker can only be destroyed while idle and there's no
guarantee a worker is idle when its wq is going down.  With dynamic
pool management, workers are not associated with workqueues at all and
only idle ones will be submitted to destroy_workqueue() so the code
won't be necessary anymore.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-06-29 10:07:13 +02:00
Tejun Heo
18aa9effad workqueue: implement WQ_NON_REENTRANT
With gcwq managing all the workers and work->data pointing to the last
gcwq it was on, non-reentrance can be easily implemented by checking
whether the work is still running on the previous gcwq on queueing.
Implement it.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-06-29 10:07:13 +02:00
Tejun Heo
7a22ad757e workqueue: carry cpu number in work data once execution starts
To implement non-reentrant workqueue, the last gcwq a work was
executed on must be reliably obtainable as long as the work structure
is valid even if the previous workqueue has been destroyed.

To achieve this, work->data will be overloaded to carry the last cpu
number once execution starts so that the previous gcwq can be located
reliably.  This means that cwq can't be obtained from work after
execution starts but only gcwq.

Implement set_work_{cwq|cpu}(), get_work_[g]cwq() and
clear_work_data() to set work data to the cpu number when starting
execution, access the overloaded work data and clear it after
cancellation.

queue_delayed_work_on() is updated to preserve the last cpu while
in-flight in timer and other callers which depended on getting cwq
from work after execution starts are converted to depend on gcwq
instead.

* Anton Blanchard fixed compile error on powerpc due to missing
  linux/threads.h include.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Anton Blanchard <anton@samba.org>
2010-06-29 10:07:13 +02:00
Tejun Heo
8cca0eea39 workqueue: add find_worker_executing_work() and track current_cwq
Now that all the workers are tracked by gcwq, we can find which worker
is executing a work from gcwq.  Implement find_worker_executing_work()
and make worker track its current_cwq so that we can find things the
other way around.  This will be used to implement non-reentrant wqs.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-06-29 10:07:13 +02:00
Tejun Heo
502ca9d819 workqueue: make single thread workqueue shared worker pool friendly
Reimplement st (single thread) workqueue so that it's friendly to
shared worker pool.  It was originally implemented by confining st
workqueues to use cwq of a fixed cpu and always having a worker for
the cpu.  This implementation isn't very friendly to shared worker
pool and suboptimal in that it ends up crossing cpu boundaries often.

Reimplement st workqueue using dynamic single cpu binding and
cwq->limit.  WQ_SINGLE_THREAD is replaced with WQ_SINGLE_CPU.  In a
single cpu workqueue, at most single cwq is bound to the wq at any
given time.  Arbitration is done using atomic accesses to
wq->single_cpu when queueing a work.  Once bound, the binding stays
till the workqueue is drained.

Note that the binding is never broken while a workqueue is frozen.
This is because idle cwqs may have works waiting in delayed_works
queue while frozen.  On thaw, the cwq is restarted if there are any
delayed works or unbound otherwise.

When combined with max_active limit of 1, single cpu workqueue has
exactly the same execution properties as the original single thread
workqueue while allowing sharing of per-cpu workers.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-06-29 10:07:13 +02:00
Tejun Heo
db7bccf45c workqueue: reimplement CPU hotplugging support using trustee
Reimplement CPU hotplugging support using trustee thread.  On CPU
down, a trustee thread is created and each step of CPU down is
executed by the trustee and workqueue_cpu_callback() simply drives and
waits for trustee state transitions.

CPU down operation no longer waits for works to be drained but trustee
sticks around till all pending works have been completed.  If CPU is
brought back up while works are still draining,
workqueue_cpu_callback() tells trustee to step down and tell workers
to rebind to the cpu.

As it's difficult to tell whether cwqs are empty if it's freezing or
frozen, trustee doesn't consider draining to be complete while a gcwq
is freezing or frozen (tracked by new GCWQ_FREEZING flag).  Also,
workers which get unbound from their cpu are marked with WORKER_ROGUE.

Trustee based implementation doesn't bring any new feature at this
point but it will be used to manage worker pool when dynamic shared
worker pool is implemented.

Signed-off-by: Tejun Heo <tj@kernel.org>
2010-06-29 10:07:12 +02:00