According to the documentation of the sysfs nodes rb_noti_cnt,
rb_active_cnt and rb_inactive_cnt, these are all related to HPB
recommendation in UPIU response packet. 'rcmd' (recommendation) should be
the correct abbreviation.
Change the sysfs documentation about these sysfs nodes to highlight what
they mean under different HPB control modes.
Link: https://lore.kernel.org/r/20220505134707.35929-5-huobean@gmail.com
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
IMA may verify a file's integrity against a "good" value stored in the
'security.ima' xattr or as an appended signature, based on policy. When
the "good value" is stored in the xattr, the xattr may contain a file
hash or signature. In either case, the "good" value is preceded by a
header. The first byte of the xattr header indicates the type of data
- hash, signature - stored in the xattr. To support storing fs-verity
signatures in the 'security.ima' xattr requires further differentiating
the fs-verity signature from the existing IMA signature.
In addition the signatures stored in 'security.ima' xattr, need to be
disambiguated. Instead of directly signing the fs-verity digest, a new
signature format version 3 is defined as the hash of the ima_file_id
structure, which identifies the type of signature and the digest.
The IMA policy defines "which" files are to be measured, verified, and/or
audited. For those files being verified, the policy rules indicate "how"
the file should be verified. For example to require a file be signed,
the appraise policy rule must include the 'appraise_type' option.
appraise_type:= [imasig] | [imasig|modsig] | [sigv3]
where 'imasig' is the original or signature format v2 (default),
where 'modsig' is an appended signature,
where 'sigv3' is the signature format v3.
The policy rule must also indicate the type of digest, if not the IMA
default, by first specifying the digest type:
digest_type:= [verity]
The following policy rule requires fsverity signatures. The rule may be
constrained, for example based on a fsuuid or LSM label.
appraise func=BPRM_CHECK digest_type=verity appraise_type=sigv3
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Permit fsverity's file digest (a hash of struct fsverity_descriptor) to
be included in the IMA measurement list, based on the new measurement
policy rule 'digest_type=verity' option.
To differentiate between a regular IMA file hash from an fsverity's
file digest, use the new d-ngv2 format field included in the ima-ngv2
template.
The following policy rule requires fsverity file digests and specifies
the new 'ima-ngv2' template, which contains the new 'd-ngv2' field. The
policy rule may be constrained, for example based on a fsuuid or LSM
label.
measure func=FILE_CHECK digest_type=verity template=ima-ngv2
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Merge master into next, to bring in commit 5f24d5a579 ("mm, hugetlb:
allow for "high" userspace addresses"), which is needed as a
prerequisite for the series converting powerpc to the generic mmap
logic.
We need the USB fixes in here, and this resolves a merge issue in
drivers/usb/dwc3/drd.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Creating a symlink pointing to the correct USB Type-C
connector for the on-board USB4 ports when they are created.
The link will be created only if the firmware is able to
describe the connection between the port and its connector.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Won Chung <wonchung@google.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
When ACPI table includes _PLD fields for a device, create a new
directory (physical_location) in sysfs to share _PLD fields.
Currently without PLD information, when there are multiple of same
devices, it is hard to distinguish which device corresponds to which
physical device at which location. For example, when there are two Type
C connectors, it is hard to find out which connector corresponds to the
Type C port on the left panel versus the Type C port on the right panel.
With PLD information provided, we can determine which specific device at
which location is doing what.
_PLD output includes much more fields, but only generic fields are added
and exposed to sysfs, so that non-ACPI devices can also support it in
the future. The minimal generic fields needed for locating a device are
the following.
- panel
- vertical_position
- horizontal_position
- dock
- lid
Signed-off-by: Won Chung <wonchung@google.com>
Link: https://lore.kernel.org/r/20220314195458.271430-1-wonchung@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The main issue this driver addresses is that a USB hub needs to be
powered before it can be discovered. For discrete onboard hubs (an
example for such a hub is the Realtek RTS5411) this is often solved
by supplying the hub with an 'always-on' regulator, which is kind
of a hack. Some onboard hubs may require further initialization
steps, like changing the state of a GPIO or enabling a clock, which
requires even more hacks. This driver creates a platform device
representing the hub which performs the necessary initialization.
Currently it only supports switching on a single regulator, support
for multiple regulators or other actions can be added as needed.
Different initialization sequences can be supported based on the
compatible string.
Besides performing the initialization the driver can be configured
to power the hub off during system suspend. This can help to extend
battery life on battery powered devices which have no requirements
to keep the hub powered during suspend. The driver can also be
configured to leave the hub powered when a wakeup capable USB device
is connected when suspending, and power it off otherwise.
Technically the driver consists of two drivers, the platform driver
described above and a very thin USB driver that subclasses the
generic driver. The purpose of this driver is to provide the platform
driver with the USB devices corresponding to the hub(s) (a hub
controller may provide multiple 'logical' hubs, e.g. one to support
USB 2.0 and another for USB 3.x).
Note: the current series only supports hubs connected directly to
a root hub, support for other configurations could be added if
needed.
Co-developed-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220217104219.v21.2.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extend the firmware subsystem to support a persistent sysfs interface that
userspace may use to initiate a firmware update. For example, FPGA based
PCIe cards load firmware and FPGA images from local FLASH when the card
boots. The images in FLASH may be updated with new images provided by the
user at his/her convenience.
A device driver may call firmware_upload_register() to expose persistent
"loading" and "data" sysfs files. These files are used in the same way as
the fallback sysfs "loading" and "data" files. When 0 is written to
"loading" to complete the write of firmware data, the data is transferred
to the lower-level driver using pre-registered call-back functions. The
data transfer is done in the context of a kernel worker thread.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Tianfei zhang <tianfei.zhang@intel.com>
Tested-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220421212204.36052-5-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull erofs fixes from Gao Xiang:
"One patch to fix a use-after-free race related to the on-stack
z_erofs_decompressqueue, which happens very rarely but needs to be
fixed properly soon.
The other patch fixes some sysfs Sphinx warnings"
* tag 'erofs-for-5.18-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
Documentation/ABI: sysfs-fs-erofs: Fix Sphinx errors
erofs: fix use-after-free of on-stack io[]
Update documentation describing DebugFS that could help
to check the change of register values.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update documentation describing DebugFS that could help
to check the change of register values.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update documentation describing DebugFS that could help
to check the change of register values.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The new efi_secret module exposes the confidential computing (coco)
EFI secret area via securityfs interface.
When the module is loaded (and securityfs is mounted, typically under
/sys/kernel/security), a "secrets/coco" directory is created in
securityfs. In it, a file is created for each secret entry. The name
of each such file is the GUID of the secret entry, and its content is
the secret data.
This allows applications running in a confidential computing setting to
read secrets provided by the guest owner via a secure secret injection
mechanism (such as AMD SEV's LAUNCH_SECRET command).
Removing (unlinking) files in the "secrets/coco" directory will zero out
the secret in memory, and remove the filesystem entry. If the module is
removed and loaded again, that secret will not appear in the filesystem.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/r/20220412212127.154182-3-dovmurik@linux.ibm.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The PSP sets several pre-defined bits in the capabilities
register to indicate that security attributes of the platform.
Export these attributes into userspace for administrators to
confirm platform is properly locked down.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the following warnings from "make htmldocs":
Documentation/ABI/testing/sysfs-driver-intel_sdsi:2:
WARNING: Unexpected indentation.
WARNING: Block quote ends without a blank line; unexpected unindent.
WARNING: Definition list ends without a blank line; unexpected unindent.
By turning the error-code table into a proper ReST table. While at it
also fix the error-code table mixing tab and spaces for indentation
(switch to all tabs).
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220324164737.21765-2-hdegoede@redhat.com
Pull libnvdimm updates from Dan Williams:
"The update for this cycle includes the deprecation of block-aperture
mode and a new perf events interface for the papr_scm nvdimm driver.
The perf events approach was acked by PeterZ.
- Add perf support for nvdimm events, initially only for 'papr_scm'
devices.
- Deprecate the 'block aperture' support in libnvdimm, it only ever
existed in the specification, not in shipping product"
* tag 'libnvdimm-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/blk: Fix title level
MAINTAINERS: remove section LIBNVDIMM BLK: MMIO-APERTURE DRIVER
powerpc/papr_scm: Fix build failure when
drivers/nvdimm: Fix build failure when CONFIG_PERF_EVENTS is not set
nvdimm/region: Delete nd_blk_region infrastructure
ACPI: NFIT: Remove block aperture support
nvdimm/namespace: Delete nd_namespace_blk
nvdimm/namespace: Delete blk namespace consideration in shared paths
nvdimm/blk: Delete the block-aperture window driver
nvdimm/region: Fix default alignment for small regions
docs: ABI: sysfs-bus-nvdimm: Document sysfs event format entries for nvdimm pmu
powerpc/papr_scm: Add perf interface support
drivers/nvdimm: Add perf interface to expose nvdimm performance stats
drivers/nvdimm: Add nvdimm pmu structure
Pull char/misc and other driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
updates for 5.18-rc1.
Included in here are merges from driver subsystems which contain:
- iio driver updates and new drivers
- fsi driver updates
- fpga driver updates
- habanalabs driver updates and support for new hardware
- soundwire driver updates and new drivers
- phy driver updates and new drivers
- coresight driver updates
- icc driver updates
Individual changes include:
- mei driver updates
- interconnect driver updates
- new PECI driver subsystem added
- vmci driver updates
- lots of tiny misc/char driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits)
firmware: google: Properly state IOMEM dependency
kgdbts: fix return value of __setup handler
firmware: sysfb: fix platform-device leak in error path
firmware: stratix10-svc: add missing callback parameter on RSU
arm64: dts: qcom: add non-secure domain property to fastrpc nodes
misc: fastrpc: Add dma handle implementation
misc: fastrpc: Add fdlist implementation
misc: fastrpc: Add helper function to get list and page
misc: fastrpc: Add support to secure memory map
dt-bindings: misc: add fastrpc domain vmid property
misc: fastrpc: check before loading process to the DSP
misc: fastrpc: add secure domain support
dt-bindings: misc: add property to support non-secure DSP
misc: fastrpc: Add support to get DSP capabilities
misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP
misc: fastrpc: separate fastrpc device from channel context
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
dt-bindings: nvmem: make "reg" property optional
nvmem: brcm_nvram: parse NVRAM content into NVMEM cells
nvmem: dt-bindings: Fix the error of dt-bindings check
...
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 5.18-rc1.
Nothing major in here, just lots of little improvements and cleanups
and new device support. Highlights are:
- list iterator fixups for when we walk past the end of the list (a
common problem that was cut/pasted in almost all USB gadget
drivers)
- xen USB driver "hardening" for malicious hosts
- xhci driver updates and fixes for more hardware types
- xhci debug cable fixes to make it actually work again
- usb gadget audio driver improvements
- usb gadget storage fixes to work with OS-X
- lots of other small usb gadget fixes and updates
- USB DWC3 driver improvements for more hardware types
- Lots of other small USB driver improvements
- DTS updates for some USB platforms
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue()
dt-bindings: usb: mtk-xhci: add compatible for mt8186
usb: dwc3: Issue core soft reset before enabling run/stop
usb: gadget: Makefile: remove ccflags-y
USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
usb: gadget: eliminate anonymous module_init & module_exit
usb: usbip: eliminate anonymous module_init & module_exit
xen/usb: harden xen_hcd against malicious backends
usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue
usb: dwc3: gadget: move cmd_endtransfer to extra function
usb: dwc3: gadget: ep_queue simplify isoc start condition
xen/usb: don't use arbitrary_virt_to_machine()
usb: isp1760: remove redundant max_packet() macro
usb: oxu210hp-hcd: remove redundant call to max_packet() macro
usb: common: usb-conn-gpio: Make VBUS supply completely optional
USB: storage: ums-realtek: fix error code in rts51x_read_mem()
usb: early: xhci-dbc: Fix xdbc number parsing
usb: early: xhci-dbc: Remove duplicate keep parsing
x86/tsc: Be consistent about use_tsc_delay()
usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body
...
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- Introduce "Bypass" charging type used by USB PPS standard
- Refactor power_supply_set_input_current_limit_from_supplier()
- Add fwnode support to power_supply_get_battery_info()
Drivers:
- ab8500: continue migrating towards using standard core APIs
- axp288 fuel-gauge: refactor driver to be fully resource managed
- battery-samsung-sdi: new in-kernel provider for (constant) Samsung
battery info
- bq24190: disable boost regulator on shutdown
- bq24190: add support for battery-info on ACPI based systems
- bq25890: prepare driver for usage on ACPI based systems
- bq25890: add boost regulator support
- cpcap-battery: add NVMEM based battery detection support
- injoinic ip5xxx: new driver for power bank IC
- upi ug3105: new battery driver
- misc small improvements and fixes"
* tag 'for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (94 commits)
power: ab8500_chargalg: Use CLOCK_MONOTONIC
power: supply: Add a driver for Injoinic power bank ICs
dt-bindings: trivial-devices: Add Injoinic power bank ICs
dt-bindings: vendor-prefixes: Add Injoinic
power: supply: ab8500: Remove unused variable
power: supply: da9150-fg: Remove unnecessary print function dev_err()
power: supply: ab8500: fix a handful of spelling mistakes
power: supply: ab8500_fg: Account for line impedance
dt-bindings: power: supply: ab8500_fg: Add line impedance
power: supply: axp20x_usb_power: fix platform_get_irq.cocci warnings
power: supply: axp20x_ac_power: fix platform_get_irq.cocci warning
power: supply: wm8350-power: Add missing free in free_charger_irq
power: supply: wm8350-power: Handle error for wm8350_register_irq
power: supply: Static data for Samsung batteries
power: supply: ab8500_fg: Use VBAT-to-Ri if possible
power: supply: Support VBAT-to-Ri lookup tables
power: supply: ab8500: Standardize BTI resistance
power: supply: ab8500: Standardize alert mode charging
power: supply: ab8500: Standardize maintenance charging
power: supply: bq24190_charger: Delay applying charge_type changes when OTG 5V Vbus boost is on
...
Pull RAS updates from Borislav Petkov:
- More noinstr fixes
- Add an erratum workaround for Intel CPUs which, in certain
circumstances, end up consuming an unrelated uncorrectable memory
error when using fast string copy insns
- Remove the MCE tolerance level control as it is not really needed or
used anymore
* tag 'ras_core_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Remove the tolerance level control
x86/mce: Work around an erratum on fast string copy instructions
x86/mce: Use arch atomic and bit helpers
Pull x86 platform driver updates from Hans de Goede:
"New drivers:
- AMD Host System Management Port (HSMP)
- Intel Software Defined Silicon
Removed drivers (functionality folded into other drivers):
- intel_cht_int33fe_microb
- surface3_button
amd-pmc:
- s2idle bug-fixes
- Support for AMD Spill to DRAM STB feature
hp-wmi:
- Fix SW_TABLET_MODE detection method (and other fixes)
- Support omen thermal profile policy v1
serial-multi-instantiate:
- Add SPI device support
- Add support for CS35L41 amplifiers used in new laptops
think-lmi:
- syfs-class-firmware-attributes Certificate authentication support
thinkpad_acpi:
- Fixes + quirks
- Add platform_profile support on AMD based ThinkPads
x86-android-tablets:
- Improve Asus ME176C / TF103C support
- Support Nextbook Ares 8, Lenovo Tab 2 830 and 1050 tablets
Lots of various other small fixes and hardware-id additions"
* tag 'platform-drivers-x86-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (60 commits)
platform/x86: think-lmi: Certificate authentication support
Documentation: syfs-class-firmware-attributes: Lenovo Certificate support
platform/x86: amd-pmc: Only report STB errors when STB enabled
platform/x86: amd-pmc: Drop CPU QoS workaround
platform/x86: amd-pmc: Output error codes in messages
platform/x86: amd-pmc: Move to later in the suspend process
ACPI / x86: Add support for LPS0 callback handler
platform/x86: thinkpad_acpi: consistently check fan_get_status return.
platform/x86: hp-wmi: support omen thermal profile policy v1
platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated
platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls
platform/x86: hp-wmi: Fix SW_TABLET_MODE detection method
platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05)
platform/x86: amd-pmc: Validate entry into the deepest state on resume
platform/x86: thinkpad_acpi: Don't use test_bit on an integer
platform/x86: thinkpad_acpi: Fix compiler warning about uninitialized err variable
platform/x86: thinkpad_acpi: clean up dytc profile convert
platform/x86: x86-android-tablets: Depend on EFI and SPI
platform/x86: amd-pmc: uninitialized variable in amd_pmc_s2d_init()
platform/x86: intel-uncore-freq: fix uncore_freq_common_init() error codes
...
Pull powerpc updates from Michael Ellerman:
"Livepatch support for 32-bit is probably the standout new feature,
otherwise mostly just lots of bits and pieces all over the board.
There's a series of commits cleaning up function descriptor handling,
which touches a few other arches as well as LKDTM. It has acks from
Arnd, Kees and Helge.
Summary:
- Enforce kernel RO, and implement STRICT_MODULE_RWX for 603.
- Add support for livepatch to 32-bit.
- Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
- Merge vdso64 and vdso32 into a single directory.
- Fix build errors with newer binutils.
- Add support for UADDR64 relocations, which are emitted by some
toolchains. This allows powerpc to build with the latest lld.
- Fix (another) potential userspace r13 corruption in transactional
memory handling.
- Cleanups of function descriptor handling & related fixes to LKDTM.
Thanks to Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh
Kumar K.V, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar
Chowdhury, Cédric Le Goater, Chen Jingwen, Christophe JAILLET,
Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel Henrique
Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu
Hua, Haren Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason
Wang, Jeremy Kerr, Joachim Wiberg, Jordan Niethe, Julia Lawall, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mamatha Inamdar,
Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal Suchanek,
Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Nour-eddine Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy
Dunlap, Ritesh Harjani, Rohan McLure, Russell Currey, Sachin Sant,
Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain, Thierry Reding,
Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean,
Wedson Almeida Filho, and YueHaibing"
* tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits)
powerpc/pseries: Fix use after free in remove_phb_dynamic()
powerpc/time: improve decrementer clockevent processing
powerpc/time: Fix KVM host re-arming a timer beyond decrementer range
powerpc/tm: Fix more userspace r13 corruption
powerpc/xive: fix return value of __setup handler
powerpc/64: Add UADDR64 relocation support
powerpc: 8xx: fix a return value error in mpc8xx_pic_init
powerpc/ps3: remove unneeded semicolons
powerpc/64: Force inlining of prevent_user_access() and set_kuap()
powerpc/bitops: Force inlining of fls()
powerpc: declare unmodified attribute_group usages const
powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n
powerpc/secvar: fix refcount leak in format_show()
powerpc/64e: Tie PPC_BOOK3E_64 to PPC_FSL_BOOK3E
powerpc: Move C prototypes out of asm-prototypes.h
powerpc/kexec: Declare kexec_paca static
powerpc/smp: Declare current_set static
powerpc: Cleanup asm-prototypes.c
powerpc/ftrace: Use STK_GOT in ftrace_mprofile.S
powerpc/ftrace: Regroup PPC64 specific operations in ftrace_mprofile.S
...
Pull CXL (Compute Express Link) updates from Dan Williams:
"This development cycle extends the subsystem to discover CXL resources
throughout a CXL/PCIe switch topology and respond to hot add/remove
events anywhere in that topology.
This is more foundational infrastructure in preparation for dynamic
memory region provisioning support. Recall that CXL memory regions, as
the new "Theory of Operation" section of
Documentation/driver-api/cxl/memory-devices.rst describes, bring
storage volume striping semantics to memory.
The hot add/remove behavior is validated with extensions to the
cxl_test unit test environment and this test in the cxl-cli test
suite:
https://github.com/pmem/ndctl/blob/djbw/for-74/cxl/test/cxl-topology.sh
Summary:
- Add a driver for 'struct cxl_memdev' objects responsible for
CXL.mem operation as distinct from 'cxl_pci' mailbox operations.
Its primary responsibility is enumerating an endpoint 'struct
cxl_port' and all the 'struct cxl_port' instances between an
endpoint and the CXL platform root.
- Add a driver for 'struct cxl_port' objects responsible for
enumerating and operating all Host-managed Device Memory (HDM)
decoder resources between the platform-level CXL memory
description, all intervening host bridges / switches, and the HDM
resources in endpoints.
- Update the cxl_pci driver to validate CXL.mem operation precursors
to HDM decoder operation like ready-polling, and legacy CXL 1.1
DVSEC based CXL.mem configuration.
- Add basic lockdep coverage for usage of device_lock() on CXL
subsystem objects similar to what exists for LIBNVDIMM. Include a
compile-time switch for which subsystem to validate at run-time.
- Update cxl_test to emulate a one level switch topology.
- Document a "Theory of Operation" for the subsystem.
- Add 'numa_node' and 'serial' attributes to cxl_memdev sysfs
- Include miscellaneous fixes for spec / QEMU CXL emulation
compatibility and static analysis reports"
* tag 'cxl-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (48 commits)
cxl/core/port: Fix NULL but dereferenced coccicheck error
cxl/port: Hold port reference until decoder release
cxl/port: Fix endpoint refcount leak
cxl/core: Fix cxl_device_lock() class detection
cxl/core/port: Fix unregister_port() lock assertion
cxl/regs: Fix size of CXL Capability Header Register
cxl/core/port: Handle invalid decoders
cxl/core/port: Fix / relax decoder target enumeration
tools/testing/cxl: Add a physical_node link
tools/testing/cxl: Enumerate mock decoders
tools/testing/cxl: Mock one level of switches
tools/testing/cxl: Fix root port to host bridge assignment
tools/testing/cxl: Mock dvsec_ranges()
cxl/core/port: Add endpoint decoders
cxl/core: Move target_list out of base decoder attributes
cxl/mem: Add the cxl_mem driver
cxl/core/port: Add switch port enumeration
cxl/memdev: Add numa_node attribute
cxl/pci: Emit device serial number
cxl/pci: Implement wait for media active
...
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, f2fs has some performance improvements for Android
workloads such as using read-unfair rwsems and adding some sysfs
entries to control GCs and discard commands in more details. In
addtiion, it has some tunings to improve the recovery speed after
sudden power-cut.
Enhancement:
- add reader-unfair rwsems with F2FS_UNFAIR_RWSEM: will replace with
generic API support
- adjust to make the readahead/recovery flow more efficiently
- sysfs entries to control issue speeds of GCs and Discard commands
- enable idmapped mounts
Bug fix:
- correct wrong error handling routines
- fix missing conditions in quota
- fix a potential deadlock between writeback and block plug routines
- fix a deadlock btween freezefs and evict_inode
We've added some boundary checks to avoid kernel panics on corrupted
images, and several minor code clean-ups"
* tag 'f2fs-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (27 commits)
f2fs: fix to do sanity check on .cp_pack_total_block_count
f2fs: make gc_urgent and gc_segment_mode sysfs node readable
f2fs: use aggressive GC policy during f2fs_disable_checkpoint()
f2fs: fix compressed file start atomic write may cause data corruption
f2fs: initialize sbi->gc_mode explicitly
f2fs: introduce gc_urgent_mid mode
f2fs: compress: fix to print raw data size in error path of lz4 decompression
f2fs: remove redundant parameter judgment
f2fs: use spin_lock to avoid hang
f2fs: don't get FREEZE lock in f2fs_evict_inode in frozen fs
f2fs: remove unnecessary read for F2FS_FITS_IN_INODE
f2fs: introduce F2FS_UNFAIR_RWSEM to support unfair rwsem
f2fs: avoid an infinite loop in f2fs_sync_dirty_inodes
f2fs: fix to do sanity check on curseg->alloc_type
f2fs: fix to avoid potential deadlock
f2fs: quota: fix loop condition at f2fs_quota_sync()
f2fs: Restore rwsem lockdep support
f2fs: fix missing free nid in f2fs_handle_failed_inode
f2fs: support idmapped mounts
f2fs: add a way to limit roll forward recovery time
...
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Texas Instruments TMP464 and TMP468 driver
- Vicor PLI1209BC Digital Supervisor driver
- ASUS EC driver
Improvements to existing drivers:
- adt7x10:
- Convert to use regmap
- convert to use with_info API
- use hwmon_notify_event
- other cleanup
- aquacomputer_d5next:
- Add support for Aquacomputer Farbwerk 360
- asus_wmi_sensors:
- Add ASUS ROG STRIX B450-F GAMING II
- asus_wmi_ec_sensors:
- Support T_Sensor on Prime X570-Pro
- Deprecate driver (replaced by new driver)
- axi-fan-control:
- Use hwmon_notify_event
- dell-smm:
- Clean up CONFIG_I8K
- disable fan type support for Inspiron 3505
- various other cleanup
- hwmon core:
- Report attribute name with udev events
- Add "label" attribute to ABI,
- Add support for pwm auto channels attribute
- max6639:
- Add regulator support
- lm70:
- Add support for TI TMP125
- lm83:
- Cleanup, convert to use with_info API
- mlxreg-fan:
- Use pwm attribute for setting fan speed low limit
- nct6775:
- Add board ID's for ASUS ROG STRIX Z390/Z490/X570-* / PRIME
X570-P, PRIME B550-PLUS, ASUS Pro B550M-C/PRIME B550M-A
- Add support for TSI temperature registers
- occ:
- Add various new sysfs attributes
- pmbus core:
- Handle VIN unit off status
- Add regulator supply into macro
- Add get_error_flags support to regulator ops
- pmbus/adm1275:
- Allow setting sample averaging
- pmbus/lm25066:
- Add regulator support
- pmbus/xdpe12284:
- Add support for xdpe11280
- register as regulator
- powr1220:
- Convert to with_info API
- Add support for Lattice's POWR1014 power manager IC
- sch56xx:
- Cleanup and minor improvements
- sch5627:
- Add pwmX_auto_channels_temp support
- tc654:
- Add thermal_cooling device support"
* tag 'hwmon-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits)
hwmon: (dell-smm) Add Inspiron 3505 to fan type blacklist
hwmon: (pmbus) Add Vin unit off handling
hwmon: (scpi-hwmon): Use of_device_get_match_data()
hwmon: (axi-fan-control) Use hwmon_notify_event
hwmon: (vexpress-hwmon) Use of_device_get_match_data()
hwmon: Add driver for Texas Instruments TMP464 and TMP468
dt-bindings: hwmon: add tmp464.yaml
dt-bindings: hwmon: Add sample averaging properties for ADM1275
hwmon: (adm1275) Allow setting sample averaging
hwmon: (xdpe12284) Add regulator support
hwmon: (xdpe12284) Add support for xdpe11280
dt-bindings: trivial-devices: Add xdpe11280
hwmon: (aquacomputer_d5next) Add support for Aquacomputer Farbwerk 360
hwmon: (sch5627) Add pwmX_auto_channels_temp support
hwmon: (core) Add support for pwm auto channels attribute
hwmon: (lm70) Add ti,tmp125 support
dt-bindings: Add ti,tmp125 temperature sensor binding
hwmon: (pmbus/pli1209bc) Add regulator support
hwmon: (pmbus) Add support for pli1209bc
dt-bindings:trivial-devices: Add pli1209bc
...
Pull thermal control updates from Rafael Wysocki:
"As far as new functionality is concerned, there is a new thermal
driver for the Intel Hardware Feedback Interface (HFI) along with some
intel-speed-select utility changes to support it. There are also new
DT compatible strings for a couple of platforms, and thermal zones on
some platforms will be registered as HWmon sensors now.
Apart from the above, some drivers are updated (fixes mostly) and
there is a new piece of documentation for the Intel DPTF (Dynamic
Power and Thermal Framework) sysfs interface.
Specifics:
- Add a new thermal driver for the Intel Hardware Feedback Interface
(HFI) including the HFI initialization, HFI notification interrupt
handling and sending CPU capabilities change messages to user space
via the thermal netlink interface (Ricardo Neri, Srinivas
Pandruvada, Nathan Chancellor, Randy Dunlap).
- Extend the intel-speed-select utility to handle out-of-band CPU
configuration changes and add support for the CPU capabilities
change messages sent over the thermal netlink interface by the new
HFI thermal driver to it (Srinivas Pandruvada).
- Convert the DT bindings to yaml format for the Exynos platform and
fix and update the MAINTAINERS file for this driver (Krzysztof
Kozlowski).
- Register the thermal zones as HWmon sensors for the QCom's Tsens
driver and TI thermal platforms (Dmitry Baryshkov, Romain Naour).
- Add the msm8953 compatible documentation in the bindings (Luca
Weiss).
- Add the sm8150 platform support to the QCom LMh driver's DT binding
(Thara Gopinath).
- Check the command result from the IPC command to the BPMP in the
Tegra driver (Mikko Perttunen).
- Silence the error for normal configuration where the interrupt is
optionnal in the Broadcom thermal driver (Florian Fainelli).
- Remove remaining dead code from the TI thermal driver (Yue
Haibing).
- Don't use bitmap_weight() in end_power_clamp() in the powerclamp
driver (Yury Norov).
- Update the OS policy capabilities handshake in the int340x thermal
driver (Srinivas Pandruvada).
- Increase the policies bitmap size in int340x (Srinivas Pandruvada).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
int340x thermal driver (Rafael Wysocki).
- Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).
- Add Intel Dynamic Power and Thermal Framework (DPTF) kernel
interface documentation (Srinivas Pandruvada).
- Fix bullet list warning in the thermal documentation (Randy
Dunlap)"
* tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
thermal: int340x: Update OS policy capability handshake
thermal: int340x: Increase bitmap size
Documentation: thermal: DPTF Documentation
MAINTAINERS: thermal: samsung: update Krzysztof Kozlowski's email
thermal/drivers/ti-soc-thermal: Remove unused function ti_thermal_get_temp()
thermal/drivers/brcmstb_thermal: Interrupt is optional
thermal: tegra-bpmp: Handle errors in BPMP response
drivers/thermal/ti-soc-thermal: Add hwmon support
dt-bindings: thermal: tsens: Add msm8953 compatible
dt-bindings: thermal: Add sm8150 compatible string for LMh
thermal/drivers/qcom/lmh: Add support for sm8150
thermal/drivers/tsens: register thermal zones as hwmon sensors
MAINTAINERS: thermal: samsung: Drop obsolete properties
dt-bindings: thermal: samsung: Convert to dtschema
tools/power/x86/intel-speed-select: v1.12 release
tools/power/x86/intel-speed-select: HFI support
tools/power/x86/intel-speed-select: OOB daemon mode
thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET
thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub
thermal: Replace acpi_bus_get_device()
...
Pull x86 cpu feature updates from Borislav Petkov:
- Merge the AMD and Intel PPIN code into a shared one by both vendors.
Add the PPIN number to sysfs so that sockets can be identified when
replacement is needed
- Minor fixes and cleanups
* tag 'x86_cpu_for_v5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Clear SME feature flag when not in use
x86/cpufeatures: Put the AMX macros in the word 18 block
topology/sysfs: Add PPIN in sysfs under cpu topology
topology/sysfs: Add format parameter to macro defining "show" functions for proc
x86/cpu: Read/save PPIN MSR during initialization
x86/cpu: X86_FEATURE_INTEL_PPIN finally has a CPUID bit
x86/cpu: Merge Intel and AMD ppin_init() functions
x86/CPU/AMD: Use default_groups in kobj_type
Pull arm64 updates from Will Deacon:
- Support for including MTE tags in ELF coredumps
- Instruction encoder updates, including fixes to 64-bit immediate
generation and support for the LSE atomic instructions
- Improvements to kselftests for MTE and fpsimd
- Symbol aliasing and linker script cleanups
- Reduce instruction cache maintenance performed for user mappings
created using contiguous PTEs
- Support for the new "asymmetric" MTE mode, where stores are checked
asynchronously but loads are checked synchronously
- Support for the latest pointer authentication algorithm ("QARMA3")
- Support for the DDR PMU present in the Marvell CN10K platform
- Support for the CPU PMU present in the Apple M1 platform
- Use the RNDR instruction for arch_get_random_{int,long}()
- Update our copy of the Arm optimised string routines for str{n}cmp()
- Fix signal frame generation for CPUs which have foolishly elected to
avoid building in support for the fpsimd instructions
- Workaround for Marvell GICv3 erratum #38545
- Clarification to our Documentation (booting reqs. and MTE prctl())
- Miscellanous cleanups and minor fixes
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (90 commits)
docs: sysfs-devices-system-cpu: document "asymm" value for mte_tcf_preferred
arm64/mte: Remove asymmetric mode from the prctl() interface
arm64: Add cavium_erratum_23154_cpus missing sentinel
perf/marvell: Fix !CONFIG_OF build for CN10K DDR PMU driver
arm64: mm: Drop 'const' from conditional arm64_dma_phys_limit definition
Documentation: vmcoreinfo: Fix htmldocs warning
kasan: fix a missing header include of static_keys.h
drivers/perf: Add Apple icestorm/firestorm CPU PMU driver
drivers/perf: arm_pmu: Handle 47 bit counters
arm64: perf: Consistently make all event numbers as 16-bits
arm64: perf: Expose some Armv9 common events under sysfs
perf/marvell: cn10k DDR perf event core ownership
perf/marvell: cn10k DDR perfmon event overflow handling
perf/marvell: CN10k DDR performance monitor support
dt-bindings: perf: marvell: cn10k ddr performance monitor
arm64: clean up tools Makefile
perf/arm-cmn: Update watchpoint format
perf/arm-cmn: Hide XP PUB events for CMN-600
arm64: drop unused includes of <linux/personality.h>
arm64: Do not defer reserve_crashkernel() for platforms with no DMA memory zones
...
Merge powerclamp thermal driver changes, int340x thermal driver changes
and thermal documentation changes for 5.18-rc1:
- Don't use bitmap_weight() in end_power_clamp() in the powerclamp
driver (Yury Norov).
- Update the OS policy capabilities handshake in the int340x thermal
driver (Srinivas Pandruvada).
- Increase the policies bitmap size in int340x (Srinivas Pandruvada).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
int340x thermal driver (Rafael Wysocki).
- Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).
- Add Intel Dynamic Power and Thermal Framework (DPTF) kernel interface
documentation (Srinivas Pandruvada).
- Fix bullet list warning in the thermal documentation (Randy Dunlap).
* thermal-powerclamp:
thermal: intel_powerclamp: don't use bitmap_weight() in end_power_clamp()
* thermal-int340x:
thermal: int340x: Update OS policy capability handshake
thermal: int340x: Increase bitmap size
thermal: Replace acpi_bus_get_device()
thermal: int340x: Check for NULL after calling kmemdup()
* thermal-docs:
Documentation: thermal: DPTF Documentation
thermal: fix Documentation bullet list warning
Jonathan writes:
First set of new device support, fixes, cleanups and features for IIO in 5.18
This cycle we had quite a few series that applied similar changes
to lots of drivers. To keep this description manageable I have
called those out in their own section rather than per driver.
Particularly pleased to see the long running AFE precision series
going in this cycle.
Series includes some late breaking fixes.
New device support
* adi,ada4250 amplifier
- New driver and dt bindings for this programmable gain amplifier.
* adi,admv1014 microwave down-converter
- New driver, dt bindings and some device specific ABI that
may be generalized as more drivers for devices similar to this
are added.
* adi,admv4420 K Band down-converter.
- New driver and dt bindings.
* adi,adxl367 accelerometer driver.
- New driver, dt-bindings + some new IIO ABI definitions to support
reference magnitude events where an estimate of the acceleration
due to gravity has been removed.
- A few fixes as follow up patches.
* adi,ltc2688 DAC with toggle and dither modes.
- New driver and bindings. Includes some new driver specific (for now)
ABI for handling toggle mode and the addition of a dither waveform to
the DAC output.
* AFE (analog front end) add support for additional types of analog device
in front of an ADC.
- RTD temperature sensors with dt bindings.
- Temperature transducers wit dt bindings.
- Related cleanup and features listed in other sections below.
* maxim,ds3502 potentiometer.
- Add support to ds1803 driver which required significant rework.
* mediatek,mt2701-auxadc driver
- Add mediatek,mt8186-auxadc - id table and chip specific info only.
* semtech,sx9324, semtech,ax9360
- Substantial refactoring of sx9310 to extract core logic for reuse
into a separate module
- New driver using this supporting sx9324 proximity sensors.
- New driver using this supporting sx9360 proximity sensors.
* silan,sc7a20
- Compatible with the st,lis2dh (or nearly anyway) so add ID and
chip specific info to enable support. Also silan vendor ID added
for dt-bindings.
Staging graduation
* adi,ad7280a monitoring ADC for stacked lithium-ion batteries in
electric cars and similar.
- Substantial rework of driver required to bring inline with current
IIO best practice. An unusual device in IIO so some interesting features
we may see more of in future.
Multiple driver/core cleanup
- Use sysfs_emit() in simple locations where there is no path to change
to various core created attributes.
- Trivial white space fixes around inconsistency between space after { and
before } in id tables.
- Introduce new handling for fractional types to avoid repeated similar
implementations. Use this in 3 drivers. Note this is also targeted
at future use in the AFE driver and was motivated by discussions
around the precision related work on that driver.
- of related header cleanups - drop of*.h and add mod_devicetable.h as
appropriate.
- Move a number of symbol exports into IIO_* namespaces. Two categories,
1) Library used by multiple drivers e.g. st_sensors
2) Core driver module exporting functions used by bus specific modules.
A few related cleanups in this set.
- Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and
similar to simplify drivers and take advantage of these new macros
allowing the compiler to do the job or removing unused code without
the need for __maybe_unused markings. Conversion of other drivers to
these new macros ongoing.
Features
* adi,adf4350
- Switch from of specific to generic device properties enabling use with
other firmware types.
* adi,adx345
- Switch from of specific to generic device properties.
- Add ACPI ID ADS0345
- Related driver cleanup.
* adi,hmc425a
- Switch from of specific to generic device properties.
* afe analog rescaler driver
- Wider range of types supported for scale.
- Support offset.
- Kunit tests.
* atlas,ezo-sensor
- Convert from of to device properties.
* fsl,mma8452
- Support mount matrix.
* infineon,dps310:
- Add ACPI ID IFX3100.
* invensense,mpu6050
- Convert to generic device properties.
* maxim,ds1803
- Add out_raw_available before supporting more devices.
- Convert from of specific to device properties.
* samsung,ssp_sensors
- Convert from of specific to device properties.
* st,stm32-timer trigger
- Convert from of specific to device properties.
* ti,hdc101x
- Add ACPI ID TXNW1010.
* ti,tsc2046:
- Add read_raw support to enable use of iio_hwmon and similar.
Fixes / cleanup.
* mailmap
- Update for Cai Huoqing
* MAINTAINERS
- Fix Analog Devices related links.
- Add entry for ADRF6780
- Add entry for ADMV1013
- Add entry for AD7293
- Add entry for ADMV8818
- Update files listed for adis-lib
* iio core:
- Fix wrong comment about current_mode being something a driver should
ever access.
- Use struct_size() rather than open coding in industrialio-hw-consumer
* adi,axl355
- Use units.h definitions instead of local versions.
* adi,adis-lib
- Simplify *updated_bits() macro
- Whitespace cleanup.
* afe - Note many of these fixes only apply to particular configurations
so the problems have probably not been seen in the wild, but will be
visible with new usecases enabled this cycle.
- Fix application of consumer scale for IIO_VAL_INT.
- Apply a scale of 1 when no scale is provided.
- Make best effort to establish a valid offset value for fractional
cases.
- Use s64 for scale calculations where parameters may be signed.
- Tidy up include order.
- Improve accuracy for small fractional sales
- Reduce risk of integer overflow.
* ams,as3935
- Use devm_delayed_work_autocancel() to replace open coded equivalent.
* aspeed,adc
- Fix wrong use of divider flag.
* atmel,sama5d2-adc
- Relax atmel,trigger-edge-type to optional.
- Drop Ludovic Desroches from listed maintainers of the dt-binding
inline with previous MAINTAINERS entry update.
* fsl,mma8452
- Fix probing when i2c_device_id used.
- dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
Use dev_to_iio_dev() instead. Note the original path in here
worked more by luck than design.
* invensense,mpu6050
- Drop ACPI_PTR() protection to avoid an unused warning.
- Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to
simplify handling.
* motorola,cpcap-adc
- Drop unused assignment.
* qcom,spmi-adc
- Fix wrong example of 'reg' in binding document.
* renesas,rzg2l-adc
- Trivial typo fix.
* semtech,sx9360
- Fix wrong register handling for event generation.
* st_sensors
- Allow manual disabling of I2C or SPI module if not needed for a particular
board. Default is still to enable the bus specific module if
appropriate bus is supported.
* st,lsm6dsx
- dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
Use dev_to_iio_dev() instead.
* ti,palmas-gpadc
- Split the interrupt fields in the dt-binding example
* ti,tsc2046
- Rework state machine to improve readability after recent debugging of
an issue fixed elsewhere.
- Add a sanity check to avoid very large memory allocations if a crazy
delay is specified.
* ti,twl6030
- Add error handling if devm_request_threaded_irq() fails.
* xilinx,ams
- Use devm_delayed_work_autocancel() instead of open coding equivalent.
- Fix missing required clock entry in dt-binding.
- Fix miss counting of channels resulting in ps channels not
being enabled.
- Fix incorrect values written to sequencer registers.
- Fix sequence for single channel reading.
* tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (245 commits)
iio: adc: xilinx-ams: Fix single channel switching sequence
iio: adc: xilinx-ams: Fixed wrong sequencer register settings
iio: adc: xilinx-ams: Fixed missing PS channels
dt-bindings: iio: adc: zynqmp_ams: Add clock entry
iio: accel: mma8452: use the correct logic to get mma8452_data
iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.
iio: imu: st_lsm6dsx: use dev_to_iio_dev() to get iio_dev struct
dt-bindings: iio: Add ltc2688 documentation
iio: ABI: add ABI file for the LTC2688 DAC
iio: dac: add support for ltc2688
dt-bindings: iio: afe: add bindings for temperature transducers
dt-bindings: iio: afe: add bindings for temperature-sense-rtd
iio: afe: rescale: add temperature transducers
iio: afe: rescale: add RTD temperature sensor support
iio: test: add basic tests for the iio-rescale driver
iio: afe: rescale: reduce risk of integer overflow
iio: afe: rescale: fix accuracy for small fractional scales
iio: afe: rescale: add offset support
iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
iio: afe: rescale: expose scale processing function
...
Certificate based authentication is available as an alternative to
password based authentication.
The WMI commands are cryptographically signed using a separate
signing server and will be verified by the BIOS before being
accepted.
This commit details the fields that are needed to support that
implementation. At present the changes are intended for Lenovo
platforms, but have been designed to keep them as flexible as possible
for future implementations from other vendors.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220317214008.3459-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We need a mid level of gc urgent mode to do GC forcibly in a period
of given gc_urgent_sleep_time, but not like using greedy GC approach
and switching to SSR mode such as gc urgent high mode. This can be
used for more aggressive periodic storage clean up.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add sysfs nodes for the frequency generator and signal counters.
Update SMA selector lists for these, and also add the new
'None', 'VCC' 'GND' selectors.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
