While doing flr on VFs, there is possibility to lost the doorbell
writing for sdma, so enable poll mem for sdma, then sdma fw would
check the pollmem holding wptr.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Since in sriov there is no need of decoding, so skip the related code;
2.Vcpu boot up and umc enable need to take at the end of the init sequence;
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Optimize init table sequence for sriov.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now uvd doorbell is from 0xf8-0xfb and vce doorbell is from 0xfc-0xff
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since rptr would not be accessed on later secure asics in sriov, remove
the ring test.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Interrupt enable is contained in vce init table and this register could
not be accessed in secure ASICs, so just remove it.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add uvd and vce re-init after gpu reset.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MMSCH FW need to get the wptr from 0 after it get the mailbox request
from driver, since every time kick the mailbox, mmsch thinks that it
is the first time engine start to initialize.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That function will be used later to support setting a page table
block with 64 bit value.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dpm control for vcn has been moved to firmware, kernel always spins
"amdgpu: [powerplay] pp_dpm_powergate_uvd was not implemented", each
time when application runs, disable it for now till pg/cg. Also remove
clock manual setting when dpm disabled, which was inherited from uvd.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vega10 also support virtual display, remove the error message.
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the list first to avoid redundant checks.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZkNpUAAoJEHm+PkMAQRiGr68H/2nr8kxpoUhZ7eA5C71waCjh
gnJSevkzJAp+fCb0KfQFAp1qvpmLLle4e6tAxYgTQZg4Z3W5cJJNfxu9TzY5sGuL
o9QUr43XzABepW4e4jhRtZv6dj3K6XruNeDQKXDZTDcc/S8zoiS/Pltq7VgPcAuM
kX+3qsNdUyknngD6b0z9NtJkb0mHKY6J8MpraWRO34egDwsaN/tuhRj0DRQpCoyQ
x/k+hMbc9MB9Dn8cfACo6Omb+r5Rfd7dTBUAju/TnIIgs//9voHba307N7XvLJZg
kWc8MqMQQZXfRZHB0atpDMHyZS/XQRlNPXj76j0+Ud/byODKTFkkazmgTpALvj8=
=CxeU
-----END PGP SIGNATURE-----
Backmerge tag 'v4.13-rc5' into drm-next
Linux 4.13-rc5
There's a really nasty nouveau collision, hopefully someone can take a look
once I pushed this out.
UAPI Changes:
- vc4: Add ioctl to allow attaching a label to a bo (Eric)
- Add new format/modifier blob plane property (Ben)
- armada: Use __u32/__u64 instead of uint32_t/uint64_t (Mikko)
- [kinda uapi] fb_helper: Expose display_info size via fb_info (David)
Core Changes:
- Default gem_dumb_[map_offset|destroy] as mmap/destroy implementations (Noralf)
- Simplify atomic properties by removing the helpers and handling in core (Daniel)
Driver Changes:
- stm: Add STM32 DSI controller driver (Phillipe)
- vc4: Add HDMI CEC support (Hans)
- rockchip: Refactor register init & soc version handling (Mark)
- misc: Remove .load_lut, .gamma_set, .gamma_get dead code (Peter)
- dw-hdmi: Add HDMI CEC support (Russell)
Cc: Philippe CORNU <philippe.cornu@st.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Mark yao <mark.yao@rock-chips.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: David Lechner <david@lechnology.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
* tag 'drm-misc-next-2017-08-08' of git://anongit.freedesktop.org/git/drm-misc: (107 commits)
drm: Nuke drm_atomic_legacy_backoff
drm: Nuke drm_atomic_helper_connector_dpms
drm: Nuke drm_atomic_helper_connector_set_property
drm: Nuke drm_atomic_helper_plane_set_property
drm: Nuke drm_atomic_helper_crtc_set_property
drm: Handle properties in the core for atomic drivers
drm: Don't update property values for atomic drivers
drm/omap: Rework the rotation-on-crtc hack
drm/radeon: Use the drm_driver.dumb_destroy default
drm/i915: Use the drm_driver.dumb_destroy default
drm/sti: Use .dumb_map_offset and .dumb_destroy defaults
drm: bridge: synopsys/dw-hdmi: Provide default configuration function for HDMI 2.0 PHY
drm/fb-helper: pass physical dimensions to fbdev
uapi drm/armada_drm.h: use __u32 and __u64 instead of uint32_t and uint64_t
drm/bridge: dw-hdmi: remove CEC engine register definitions
drm/bridge: dw-hdmi: add cec driver
drm/bridge: dw-hdmi: add missing cec_notifier_put
drm: remove unused and redundant callbacks
staging: vboxvideo: remove dead gamma lut code
drm: dw-hdmi-i2s: add missing company name on Copyright
...
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-5-peda@axentia.se
Otherwise bo->shadow_list (which is aliased by bo->mn_list) will not
appear empty in amdgpu_ttm_bo_destroy and cause an oops when freeing
former userptr BOs.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As I was staring at the si_init_golden_registers code, I noticed that
the Pitcairn initialization silently falls through the Cape Verde
initialization, and the Oland initialization falls through the Hainan
initialization. However there is no comment stating that this is
intentional, and the radeon driver doesn't have any such fallthrough,
so I suspect this is not supposed to happen.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 62a3755341 ("drm/amdgpu: add si implementation v10")
Cc: Ken Wang <Qingqing.Wang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Marek Olšák" <maraeo@gmail.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
- Stop reprogramming the MC, the vbios already does this in asic_init
- Reduce internal gart to 256M (this does not affect the ttm GTT pool size)
- Initial support for huge pages
- Rework bo migration logic
- Lots of improvements for vega10
- Powerplay fixes
- Additional Raven enablement
- SR-IOV improvements
- Bug fixes
- Code cleanup
* 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux: (138 commits)
drm/amdgpu: fix header on gfx9 clear state
drm/amdgpu: reduce the time of reading VBIOS
drm/amdgpu/virtual_dce: Remove the rmmod error message
drm/amdgpu/gmc9: disable legacy vga features in gmc init
drm/amdgpu/gmc8: disable legacy vga features in gmc init
drm/amdgpu/gmc7: disable legacy vga features in gmc init
drm/amdgpu/gmc6: disable legacy vga features in gmc init (v2)
drm/radeon: Set depth on low mem to 16 bpp instead of 8 bpp
drm/amdgpu: fix the incorrect scratch reg number on gfx v6
drm/amdgpu: fix the incorrect scratch reg number on gfx v7
drm/amdgpu: fix the incorrect scratch reg number on gfx v8
drm/amdgpu: fix the incorrect scratch reg number on gfx v9
drm/amd/powerplay: add support for 3DP 4K@120Hz on vega10.
drm/amdgpu: enable huge page handling in the VM v5
drm/amdgpu: increase fragmentation size for Vega10 v2
drm/amdgpu: ttm_bind only when user needs gpu_addr in bo pin
drm/amdgpu: correct clock info for SRIOV
drm/amdgpu/gmc8: SRIOV need to program fb location
drm/amdgpu: disable firmware loading for psp v10
drm/amdgpu:fix gfx fence allocate size
...
This got missed when we open sourced this.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This got missed when we open sourced this.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZdS4PAAoJEHm+PkMAQRiGbEYH/2mukTPOUAfNoWaVjO2YHxuL
5yI3n1838tKIJm967IUmGdckN/RYGPjJxvZ+muXN2/rv23+9j3LVq9vQcsYqRQop
vrWP+hvGGJvOGJ2NYBDB+4AUrPPdeX9stolwyAcYvyCZ8AilPIovm4s2poA+fuQX
D78c8JSfpse32oc93dy4bUz3mRFKTeufstrWEuzqXI691mthF2G9EpA0R3hlbqv+
GiUnNcZVOnOuCt/47GnpWVKsyv91l3CkGq3bV1GSUi8a/1PnyFxHQxQI/qgbkLXs
NuswRupSeLDQKRgiDLgWF/BpdHEp4dpFFWXm00KWlgxeGSQnKat9bpW/d5OgnhA=
=mv3H
-----END PGP SIGNATURE-----
Backmerge tag 'v4.13-rc2' into drm-next
Linux 4.13-rc2
This is required for drm-misc fixing.
I need this to be able to apply the deferred fbdev setup patches, I
need the relevant prep work that landed through the drm-intel tree.
Also squash in conflict fixup from Laurent Pinchart.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- FBINFO_CAN_FORCE_OUTPUT has been a lie ever since we nerfed&removed
the entire panic handling code in our fbdev emulation. We might
restore kms panic output, but not through the bazillion of legacy
code layers called fbdev/fbcon, there's just no way to make that
work safely.
- With the module check change FBINFO_DEFAULT is always 0, so can be
removed too.
That removes another change to cargo-cult stuff in kms drivers, yay!
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170706125735.28299-5-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Copy the approach taken by gfx8, which simplifies the code, and set the
instance index properly. The latter is required for debugging, e.g. for
reading wave status by UMR.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VRAM is usually marked write combined, so change ioremap mode from
noncache to write combine for reading vbios from VRAM.
This will reduce cost time of reading vbios from 188ms to 8ms.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the error message "[drm:amdgpu_irq_disable_all
[amdgpu]] *ERROR* error disabling interrupt (-22)".
For virtual dce, it only use AMDGPU_CRTC_IRQ_VBLANK1 -
AMDGPU_CRTC_IRQ_VBLANK6, and don't use AMDGPU_CRTC_IRQ_VLINE1
- AMDGPU_CRTC_IRQ_VLINE6. And when rmmod amdgpu, it will disable
all interrupts, it will return error when the type of crtc irq
interrupt is AMDGPU_CRTC_IRQ_VLINE1 - AMDGPU_CRTC_IRQ_VLINE6.
BUG: SWDEV-121607
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Needs to be done when the MC is set up.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Needs to be done when the MC is set up.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Needs to be done when the MC is set up.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Needs to be done when the MC is set up.
v2: make consistent with other asics
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The hardware can use huge pages to map 2MB of address space with only one PDE.
v2: few cleanups and rebased
v3: skip PT updates if we are using the PDE
v4: rebased, added support for CPU based updates
v5: fix CPU based updates once more
v6: fix ndw estimation
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-tested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fragment bits work differently for Vega10 compared to previous generations.
Increase the fragment size to 2MB for now to better handle that.
v2: handle the hardware setup as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-tested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, get clock info from default clk of pm if dpm is disable.
Buf SRIOV doesn't support dpm and pm, can't get anything from pm.
Only get clock info only from default clk of amdgpu for SRIOV.
And driver get pm default clk also from amdgpu default clk and never
be changed by others. So use amdgpu default clk value for SRIOV
and non-dpm cases.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SRIOV won't do vbios post in guest OS, and the mmMC_VM_FB_LOCATION
is pf and vf copy, so still need to program fb location for SRIOV.
v2: No need to stop mc, and update gmc_v8_0_vram_gtt_location as well.
v3: New line after the stack variables
BUG: SWDEV-126629
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now asd firmware is not ready for psp v10, will enable it when it's available
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1, for sriov, we need 8dw for the gfx fence due to CP
behaviour
2, cleanup wrong logic in wptr/rptr wb alloc and free
Change-Id: Ifbfed17a4621dae57244942ffac7de1743de0294
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows gdb to access contents of user mode mapped VRAM BOs.
v2: return error for non-VRAM pools
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copy the approach taken by gfx8, which simplifies the code, and set the
instance index properly. The latter is required for debugging, e.g. for
reading wave status by UMR.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64).
For any other mode, the VIC filed in AVI infoframes should be 0.
HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is
extended to (VIC 1-107).
This patch adds a bool input variable, which indicates if the connected
sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a
HDMI 2.0 VIC to a HDMI 1.4 sink.
This patch touches all drm drivers, who are callers of this function
drm_hdmi_avi_infoframe_from_display_mode but to make sure there is
no change in current behavior, is_hdmi2 is kept as false.
In case of I915 driver, this patch:
- checks if the connected display is HDMI 2.0.
- HDMI infoframes carry one of this two type of information:
- VIC for 4K modes for HDMI 1.4 sinks
- S3D information for S3D modes
As CEA-861-F has already defined VICs for 4K videomodes, this
patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks,
until the mode is 3D.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <jose.abreu@synopsys.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
PS: This patch touches a few lines in few files, which were
already above 80 char, so checkpatch gives 80 char warning again.
- gpu/drm/omapdrm/omap_encoder.c
- gpu/drm/i915/intel_sdvo.c
V2: Rebase, Added r-b from Andrzej
V3: Addressed review comment from Ville:
- Do not send VICs in both AVI-IF and HDMI-IF
send only one of it.
V4: Rebase
V5: Added r-b from Neil.
Addressed review comments from Ville
- Do not block HDMI vendor IF, instead check for VIC while
handling AVI infoframes
V6: Rebase
V7: Rebase
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-2-git-send-email-shashank.sharma@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
The test was relaxed a bit to much.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-and-Tested-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to try to map them every time.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a BO is moved or destroyed it shouldn't be kmapped any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to do this after every single update.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handy for debugging.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Printing a warning into the logs that we will certainly run into a BUG() is
completely nonsense, the BUG() is more than noisy enough.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to wait with the correct owner on unmap operations or otherwise can run
into VM faults.
Also always wait for the page directory since this is where the reservation
object comes from. So rename the function to amdgpu_vm_wait_pd instead as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't have any update fence in that case, so the need
for flushing isn't detected automatically.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Spreading them causes performance regressions using compute
queues on Polaris 11.
Cc: Jim Qu <jim.qu@amd.com>
Acked-by: Jim Qu <Jim.Qu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is just future proofing code, not something that can be triggered
in real life. We're testing to make sure we don't shift wrap when we
do "1ull << i" so "i" has to be in the 0-63 range. If it's 64 then we
have gone too far.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to read the vbios image directly from ROM.
This is already implemented for other asics, but was not
yet available for SI.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Maybe a leftover from bringup?
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than the legacy atombios version.
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The information has moved to different tables, notably
smu_info for core refclk and umc_info for mem refclk.
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A subset of VM fault types currently send retry XNACK to the client.
This causes a storm of interrupts from the VM to the host.
Until the storm is throttled by other means send no-retry XNACK for
all fault types instead. No change in behavior to the client which
will stall indefinitely with the current configuration in any case.
Improves system stability under GC or MMHUB faults.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: John Bridgman <John.Bridgman@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set a configurable SDMA phase quantum when enabling SDMA context
switching. The default value significantly reduces SDMA latency
in page table updates when user-mode SDMA queues have concurrent
activity, compared to the initial HW setting.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Andres Rodriguez <andres.rodriguez@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable SDMA context switching on CIK (copied from sdma_v3_0.c).
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GFX context, the ATC bit in SDMA*_GFX_VIRTUAL_ADDRESS can be cleared
to perform in VM mode. For RLC context, to support ATC mode , ATC bit in
SDMA*_RLC*_VIRTUAL_ADDRESS should be set. SDMA_CNTL.ATC_L1_ENABLE bit is
global setting that enables the L1-L2 translation for ATC address.
Signed-off-by: shaoyun liu <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This gives BOs which haven't been accessed by the CPU since they were
moved to visible VRAM another chance to stay in VRAM when another BO
needs to go to visible VRAM.
This should allow BOs to stay in VRAM longer in some cases.
v2:
* Only do this for BOs which don't have the
AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED flag set.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no need for page faults to force BOs into visible VRAM if it's
full, and the time it takes to do so is great enough to cause noticeable
stuttering. Add GTT as a possible placement so that if visible VRAM is
full, page faults move BOs to GTT instead of evicting other BOs from VRAM.
Suggested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: John Brooks <john@fastquake.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a BO is moved to VRAM, clear AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED.
This allows it to potentially later move to invisible VRAM if the CPU
does not access it again.
Setting the CPU_ACCESS flag in amdgpu_bo_fault_reserve_notify() also means
that we can remove the loop to restrict lpfn to the end of visible VRAM,
because amdgpu_ttm_placement_init() will do it for us.
v3 [Michel Dänzer]
* Use AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED instead of a new flag
(Christian König)
* Clear flag in amdgpu_bo_move instead of amdgpu_move_ram_vram
(Christian)
* Explicitly mention amdgpu_bo_fault_reserve_notify in amdgpu_bo_move
* Also clear flag in amdgpu_bo_create_restricted
Suggested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: John Brooks <john@fastquake.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The BO move throttling code is designed to allow VRAM to fill quickly if it
is relatively empty. However, this does not take into account situations
where the visible VRAM is smaller than total VRAM, and total VRAM may not
be close to full but the visible VRAM segment is under pressure. In such
situations, visible VRAM would experience unrestricted swapping and
performance would drop.
Add a separate counter specifically for moves involving visible VRAM, and
check it before moving BOs there.
v2: Only perform calculations for separate counter if visible VRAM is
smaller than total VRAM. (Michel Dänzer)
v3: [Michel Dänzer]
* Use BO's location rather than the AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED
flag to determine whether to account a move for visible VRAM in most
cases.
* Use a single
if (adev->mc.visible_vram_size < adev->mc.real_vram_size) {
block in amdgpu_cs_get_threshold_for_moves.
Fixes: 95844d20ae (drm/amdgpu: throttle buffer migrations at CS using a fixed MBps limit (v2))
Signed-off-by: John Brooks <john@fastquake.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow specifying a limit on visible VRAM via a module parameter. This is
helpful for testing performance under visible VRAM pressure.
v2: Add cast to 64-bit (Christian König)
Signed-off-by: John Brooks <john@fastquake.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Limit the default GART size and save a lot of VRAM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows setting the gtt size independent of the gart size.
v2: fix copy and paste typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should only cover the GART size with the GTT manager.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename symbols from gtt_ to gart_ as appropriate.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change, just cleanup.
v2: rebased, keep gart name.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than checking the CONGIG_MEMSIZE register as that may
not be reliable on some APUs.
v2: The scratch register is only used on CIK+
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Call nbio init registers on hw_init to set up any
nbio registers that need initialization at hw init time.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used for nbio registers that need to be initialized. Currently
only used for a golden setting that got missed on some boards.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- v2: rename param 'en' as 'lock'
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the TTM values instead of the hardware config here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can finally remove this now.
v2: remove now unused max_size variable as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to map BOs to GTT on eviction and intermediate transfers any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way we don't need to map the full BO at a time any more.
v2: use fixed windows for src/dst
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to write the mapped PTEs into
an IB instead of the table directly.
v2: fix build with debugfs enabled, remove unused assignment
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to use them as remap address space.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The arrays pctl0_data and pctl1_data do not need to be in global scope,
so them both static.
Cleans up sparse warnings:
symbol 'pctl0_data' was not declared. Should it be static?
symbol 'pctl1_data' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get it from the system info table.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement support using the new atomfirmware system info table.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not all vbios images seem to set the version appropriately.
Switch the check based on asic type instead.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König<christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In previous case, driver can't enable psp via the kernel parameter for raven.
We should open this path and set it as direct by default till psp firmware
loading is workable.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
nbio hdp flush routine are called within atomic context.
Avoid use KIQ when write to the HDP_MEM_COHERENCY_FLUSH_CNTL register
since this register has its own VF copy
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for SR-IOV, we must keep the pipeline-sync in the protection
of COND_EXEC, otherwise the command consumed by CPG is not
consistent when world switch triggerd, e.g.:
world switch hit and the IB frame is skipped so the fence
won't signal, thus CP will jump to the next DMAframe's pipeline-sync
command, and it will make CP hang foever.
after pipelin-sync moved into COND_EXEC the consistency can be
guaranteed
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Certain MC registers need a delay after writing them to properly
update in the init sequence.
Signed-off-by: Ken Wang <Ken.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check the atom scratch registers to see if asic_init is complete
or not.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that we use a pointer to the scratch reg start offset,
most of the functions were duplicated.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ttm_place are not supposed to change at runtime. All functions
working with ttm_place provided by <drm/ttm/ttm_placement.h> work
with const ttm_place. So mark the non-const structs as const.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise the upper bits are lost.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This avoids binding them later on.
v2: fix typo in function name
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
No need to do this on every round.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
This allows us to flush the system VM here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
This allows us to queue IBs which needs an up to date system domain as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Overwriting still used ring content has a low probability to cause
problems, not writing at all has 100% probability to cause problems.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Keep them where they belong.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
This was updated to 512 and the description update got missed
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With previous golden settings, compute task can't use
reserved LDS (32K) on CU0 and CU1. On 64K LDS system,
if compute work group allocate more than 32K LDS, then
it can't be dispatched to CU0 and CU1 because of the
reservation. This enables compute task to use reserved
LDS on CU0 and CU1.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we trigger a bunch of WARN_ONs when this is called.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stop spreading the code over all GMC generations.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This feature works for SRIOV enviroment. For non-SRIOV enviroment, the
trans_error function does nothing.
The error information includes error_code (16bit), error_flags(16bit)
and error_data(64bit). Since there are not many errors, we keep the
errors in an array and transfer all errors to Host before amdgpu
initialization function (amdgpu_device_init) exit.
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With instantaneous high precision vblank timestamping
that updates at leading edge of vblank, a cooked hw
vblank counter which increments at leading edge of
vblank, and reliable page flip execution and completion
at leading edge of vblank, we should meet the requirements
for fast/immediate vblank irq disable/enable.
Testing on Linux-4.12-rc5 + drm-next on a Radeon R9 380
Tonga Pro (DCE 10) with timing measurement equipment
indicates this works fine, so allow immediate vblank
disable for power saving.
For debugging in case of unexpected trouble, booting
with kernel cmdline option drm.vblankoffdelay=0
(or echo 0 > /sys/module/drm/parameters/vblankoffdelay)
would keep vblank irqs permanently on to approximate old
behavior.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are no longer needed now that we use the fb_location
programmed by the vbios.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to do this as the vbios does this for us. As such
we no longer need to stop the mc during init.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to do this as the vbios does this for us. As such
we no longer need to stop the mc during init.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to do this as the vbios does this for us. As such
we no longer need to stop the mc during init.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This makes mc programming much simpler in future patches.
Since evergreen, the vbios has been programming the fb location
to the proper vram size. The only reason to reprogram it would
be to change the location.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This makes mc programming much simpler in future patches.
Since evergreen, the vbios has been programming the fb location
to the proper vram size. The only reason to reprogram it would
be to change the location.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This makes mc programming much simpler in future patches.
Since evergreen, the vbios has been programming the fb location
to the proper vram size. The only reason to reprogram it would
be to change the location.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This got dropped accidently with the fb location changes, but for
some reason, this doesn't seem to cause an issue on all cards which
is why I never saw it despite extensive testing. I suspect it may
only be an issue on systems with a legacy sbios that enables vga.
Tested-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that we don't join PTE updates any more we don't need to call
the update function twice for this.
v2: rebased
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: enable 4 level-page table on raven
v2: add back legacy 2 level page table on raven
v3: set num_level in initial switch statement
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The number of compute queues available to the KFD was erroneously
calculated as 64. Only the first MEC can execute compute queues and
it has 32 queue slots.
This caused the oversubscription limit to be calculated incorrectly,
leading to a missing chained runlist command at the end of an
oversubscribed runlist.
v2: Remove unused num_mec field to avoid duplicate logic
v3: Separate num_mec removal into separate patches
Change-Id: I9e7bba2cc1928b624e3eeb1edb06fdb602e5294f
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
-----BEGIN PGP SIGNATURE-----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=2S5N
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm, I think I've got one later
driver pull for mediatek SoC driver, I'm undecided on if it needs to
go to you yet.
Otherwise summary below:
Core drm:
- Atomic add driver private objects
- Deprecate preclose hook in modern drivers
- MST bandwidth tracking
- Use kvmalloc in more places
- Add mode_valid hook for crtc/encoder/bridge
- Reduce sync_file construction time
- Documentation updates
- New DRM synchronisation object support
New drivers:
- pl111 - pl111 CLCD display controller
Panel:
- Innolux P079ZCA panel driver
- Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels
- panel-samsung-s6e3ha2: Add s6e3hf2 panel support
i915:
- SKL+ watermark fixes
- G4x/G33 reset improvements
- DP AUX backlight improvements
- Buffer based GuC/host communication
- New getparam for (sub)slice infomation
- Cannonlake and Coffeelake initial patches
- Execbuf optimisations
radeon/amdgpu:
- Lots of Vega10 bug fixes
- Preliminary raven support
- KIQ support for compute rings
- MEC queue management rework
- DCE6 Audio support
- SR-IOV improvements
- Better radeon/amdgpu selection support
nouveau:
- HDMI stereoscopic support
- Display code rework for >= GM20x GPUs
msm:
- GEM rework for fine-grained locking
- Per-process pagetable work
- HDMI fixes for Snapdragon 820.
vc4:
- Remove 256MB CMA limit from vc4
- Add out-fence support
- Add support for cygnus
- Get/set tiling ioctls support
- Add T-format tiling support for scanout
zte:
- add VGA support.
etnaviv:
- Thermal throttle support for newer GPUs
- Restore userspace buffer cache performance
- dma-buf sync fix
stm:
- add stm32f429 display support
exynos:
- Rework vblank handling
- Fixup sw-trigger code
sun4i:
- V3s display engine support
- HDMI support for older SoCs
- Preliminary work on dual-pipeline SoCs.
rcar-du:
- VSP work
imx-drm:
- Remove counter load enable from PRE
- Double read/write reduction flag support
tegra:
- Documentation for the host1x and drm driver.
- Lots of staging ioctl fixes due to grate project work.
omapdrm:
- dma-buf fence support
- TILER rotation fixes"
* tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits)
drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()
drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
amdgpu: Set cik/si_support to 1 by default if radeon isn't built
drm/amdgpu/gfx9: fix driver reload with KIQ
drm/amdgpu/gfx8: fix driver reload with KIQ
drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
drm/ttm: Fix use-after-free in ttm_bo_clean_mm
drm/amd/amdgpu: move get memory type function from early init to sw init
drm/amdgpu/cgs: always set reference clock in mode_info
drm/amdgpu: fix vblank_time when displays are off
drm/amd/powerplay: power value format change for Vega10
drm/amdgpu/gfx9: support the amdgpu.disable_cu option
drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
drm/amdgpu/cs: fix a typo in a comment
drm/amdgpu: Fix the exported always on CU bitmap
drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static
drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup
drm/amd/powerplay/cz: print message if smc message fails
drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
...
the drm_file parameter is unused, so remove it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
when hw_fini, pp will disable dpm.so remove sysfs before
disable dpm.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was required to explicitly set these parameters to 1, even if the
radeon driver isn't built at all, which is not intuitive.
Reported-by: Shawn Starr <shawn.starr@rogers.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop the KCQ disabling via KIQ. We disable the MEC shortly
after anyway, so there is no need to wait for all of this.
Doing so seems to leave the MEC in a bad way.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop the deactivation in KIQ init and drop the KCQ disabling
via KIQ. We disable the MEC shortly after anyway, so there is
no need to wait for all of this. Doing so seems to leave the
MEC in a bad way.
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On PX system, it will get memory type before gpu post , and get unkown type.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unnecessary save/restore of pdev->d3_delay.
The only assignments to pdev->d3_delay are in radeon_switcheroo_set_state()
and some quirks, none of which should be relevant in the
amdgpu_switcheroo_set_state() path.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
It's relevent regardless of whether there are displays
enabled. Fixes garbage values for ref clock in powerplay
leading to incorrect fan speed reporting when displays
are disabled.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=101653
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If the displays are off, set the vblank time to max to make
sure mclk switching is enabled. Avoid mclk getting set
to high when no displays are attached.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=101528
fixes: 09be4a5219 (drm/amd/powerplay/smu7: add vblank check for mclk switching (v2))
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This is ported from gfx8.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function is called only once inside the .c file.
v2: update the commit message (Michel)
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Newer asics with 4 SEs are not able to fit the entire bitmask in the
original field, use an array instead.
v2: keep cu_ao_mask for backward compatibility.
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than casting and shifting. Fixes sparse cast warnings.
Reviewed-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The debugfs interface has calls a function that was evidently
defined under the wrong name in some configurations:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:64:12: error: 'amdgpu_debugfs_test_ib_ring_init' used but never defined [-Werror]
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3803:12: error: 'amdgpu_debugfs_test_ib_init' defined but not used [-Werror=unused-function]
This fixes the function name.
Fixes: 4f0955fcc0 ("drm/amdgpu: export test ib debugfs interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
psp->cmd will be used on resume phase, so we can not free it on hw_init.
Otherwise, a memory corruption will be triggered.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Xiaojie Yuan <Xiaojie.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
caused by not program dynamic_cu_mask_addr in the KIQ MQD.
v2: create struct vi_mqd_allocation in FB which will contain
1. PM4 MQD structure.
2. Write Pointer Poll Memory.
3. Read Pointer Report Memory
4. Dynamic CU Mask.
5. Dynamic RB Mask.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZUGOmAAoJEHm+PkMAQRiGhX8H/3fIhingPD01MBf98U0xGrJo
yIXmhu6nFs7TM0lDVDcHsKgqLQIT69ll7PrSZrMkc1RGUIPINoCuJVuJqDre0kfB
of5TX2KegqSx8h1vOWjGBCBjdYfPGyMdf9icf6KsGc/SlIdhN6WA99kglAjJA0Ve
qPTNagF0ntUNg1lsXffxyfcHqFpyqw/Z/C4ie/byFsn9iJ1VG9mNlTWSud09vhuM
3tvHzTUVAIWWuRrrgrvgqQpnwL+q5BfSDsXScMjBau0EK3RGGqG8EN6Kbkfa7VQ6
aBoeboQjUijSJnVwvySdQ11MChTIOwZdfrNPra/1HD3WJNsSu4BIRt5JcAKcOhc=
=qmSg
-----END PGP SIGNATURE-----
Backmerge tag 'v4.12-rc7' into drm-next
Linux 4.12-rc7
Needed at least rc6 for drm-misc-next-fixes, may as well go to rc7
Both drivers shut down all crtc beforehand already, which will shut up
any pending vblank (the only thing vblank_cleanup really does is
disable the disable timer). Hence we don't need this here and can
remove it.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-2-daniel.vetter@ffwll.ch
Increase the default display clock on newer asics to
accomodate some high res modes with really high refresh
rates.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=93826
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We were using the wrong structure which lead to an overflow
on some boards.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=101387
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The magic switching between proper pci driver and shadow-attach isn't
useful anymore since there's no ums+kms drivers left. Let's split this
up properly, calling pci_register_driver for kms drivers and renaming
the shadow-attach init to drm_legacy_pci_init/exit.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-6-daniel.vetter@ffwll.ch
In original function amdgpu_bo_list_get, the waiting
for result->lock can be quite long while mutex
bo_list_lock was holding. It can make other tasks
waiting for bo_list_lock for long period.
Secondly, this patch allows several tasks(readers of idr)
to proceed at the same time.
v2: use rcu and kref (Dave Airlie and Christian König)
v3: update v1 commit message (Michel Dänzer)
v4: rebase on upstream (Alex Deucher)
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
v2: Remove duplication of zeroing of bo list (Christian König)
Move idr_alloc function to end of ioctl (Christian König)
Call kfree bo_list when amdgpu_bo_list_set return error.
Combine the previous two patches into this patch.
Add amdgpu_bo_list_set function prototype.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
This creates a new command submission chunk for amdgpu
to add in and out sync objects around the submission.
Sync objects are managed via the drm syncobj ioctls.
The command submission interface is enhanced with two new
chunks, one for syncobj pre submission dependencies,
and one for post submission sync obj signalling,
and just takes a list of handles for each.
This is based on work originally done by David Zhou at AMD,
with input from Christian Konig on what things should look like.
In theory VkFences could be backed with sync objects and
just get passed into the cs as syncobj handles as well.
NOTE: this interface addition needs a version bump to expose
it to userspace.
TODO: update to dep_sync when rebasing onto amdgpu master.
(with this - r-b from Christian)
v1.1: keep file reference on import.
v2: move to using syncobjs
v2.1: change some APIs to just use p pointer.
v3: make more robust against CS failures, we now add the
wait sems but only remove them once the CS job has been
submitted.
v4: rewrite names of API and base on new syncobj code.
v5: move post deps earlier, rename some apis
v6: lookup post deps earlier, and just replace fences
in post deps stage (Christian)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This just splits out the fence depenency checking into it's
own function to make it easier to add semaphore dependencies.
v2: rebase onto other changes.
v1-Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoids printing spurious messages like this:
[ 3.102059] amdgpu 0000:01:00.0: VM size (-1) must be a power of 2
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZPdbLAAoJEHm+PkMAQRiGx4wH/1nCjfnl6fE8oJ24/1gEAOUh
biFdqJkYZmlLYHVtYfLm4Ueg4adJdg0wx6qM/4RaAzmQVvLfDV34bc1qBf1+P95G
kVF+osWyXrZo5cTwkwapHW/KNu4VJwAx2D1wrlxKDVG5AOrULH1pYOYGOpApEkZU
4N+q5+M0ce0GJpqtUZX+UnI33ygjdDbBxXoFKsr24B7eA0ouGbAJ7dC88WcaETL+
2/7tT01SvDMo0jBSV0WIqlgXwZ5gp3yPGnklC3F4159Yze6VFrzHMKS/UpPF8o8E
W9EbuzwxsKyXUifX2GY348L1f+47glen/1sedbuKnFhP6E9aqUQQJXvEO7ueQl4=
=m2Gx
-----END PGP SIGNATURE-----
BackMerge tag 'v4.12-rc5' into drm-next
Linux 4.12-rc5 for nouveau fixes
New radeon and amdgpu features for 4.13:
- Lots of Vega10 bug fixes
- Preliminary Raven support
- KIQ support for compute rings
- MEC queue management rework from Andres
- Audio support for DCE6
- SR-IOV improvements
- Improved module parameters for controlling radeon vs amdgpu support
for SI and CIK
- Bug fixes
- General code cleanups
[airlied: dropped drmP.h header from one file was needed and build broke]
* 'drm-next-4.13' of git://people.freedesktop.org/~agd5f/linux: (362 commits)
drm/amdgpu: Fix compiler warnings
drm/amdgpu: vm_update_ptes remove code duplication
drm/amd/amdgpu: Port VCN over to new SOC15 macros
drm/amd/amdgpu: Port PSP v10.0 over to new SOC15 macros
drm/amd/amdgpu: Port PSP v3.1 over to new SOC15 macros
drm/amd/amdgpu: Port NBIO v7.0 driver over to new SOC15 macros
drm/amd/amdgpu: Port NBIO v6.1 driver over to new SOC15 macros
drm/amd/amdgpu: Port UVD 7.0 over to new SOC15 macros
drm/amd/amdgpu: Port MMHUB over to new SOC15 macros
drm/amd/amdgpu: Cleanup gfxhub read-modify-write patterns
drm/amd/amdgpu: Port GFXHUB over to new SOC15 macros
drm/amd/amdgpu: Add offset variant to SOC15 macros
drm/amd/powerplay: add avfs control for Vega10
drm/amdgpu: add virtual display support for raven
drm/amdgpu/gfx9: fix compute ring doorbell index
drm/amd/amdgpu: Rename KIQ ring to avoid spaces
drm/amd/amdgpu: gfx9 tidy ups (v2)
drm/amdgpu: add contiguous flag in ucode bo create
drm/amdgpu: fix missed gpu info firmware when cache firmware during S3
drm/amdgpu: export test ib debugfs interface
...
CPU and GPU paths were mostly the same.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows reading/writing via SOC15 macros with offset for
various register banks.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Same as other asics. If enabled, exposes a user selectable
number of virtual displays.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This got lost when the code was revamped. Copy/paste bug from
gfx8.
Reported-by: Evan Quan <evan.quan@amd.com>
Fixes: 78c168342 (drm/amdgpu: allow split of queues with kfd at queue granularity v4)
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Swap space for underscore in ring name.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A couple of simple tidy ups to register programming.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
(v2): Avoid using 'data' uninitialized
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under VF environment, the ucode would be settled to the visible VRAM,
As it would be pinned to the visible VRAM, it's better to add
contiguous flag,otherwise it need to move gpu address during the pin
process. This movement is not necessary.
Signed-off-by: horchen <horace.chen@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gpu_info firmware is released after data is used. But when system enters into
suspend, upper class driver will cache all firmware names. At that time,
gpu_info will be failing to load. It seems an upper class issue, that we should
not release gpu_info firmware until device finished.
[ 903.236589] cache_firmware: amdgpu/vega10_sdma1.bin
[ 903.236590] fw_set_page_data: fw-amdgpu/vega10_sdma1.bin buf=ffff88041eee10c0 data=ffffc90002561000 size=17408
[ 903.236591] cache_firmware: amdgpu/vega10_sdma1.bin ret=0
[ 903.464160] __allocate_fw_buf: fw-amdgpu/vega10_gpu_info.bin buf=ffff88041eee2c00
[ 903.471815] (NULL device *): loading /lib/firmware/updates/4.11.0-custom/amdgpu/vega10_gpu_info.bin failed with error -2
[ 903.482870] (NULL device *): loading /lib/firmware/updates/amdgpu/vega10_gpu_info.bin failed with error -2
[ 903.492716] (NULL device *): loading /lib/firmware/4.11.0-custom/amdgpu/vega10_gpu_info.bin failed with error -2
[ 903.503156] (NULL device *): direct-loading amdgpu/vega10_gpu_info.bin
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As Christian and David's suggestion, submit the test ib ring debug interfaces.
It's useful for debugging with the command submission without VM case.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to clear it. The values are set explicitly.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit d63c277dc6
("drm/amdgpu: Make display watermark calculations more accurate")
made watermark calculations more accurate, but not for > 4k
resolutions on 32-Bit architectures, as it introduced an integer
overflow for those setups and resolutions.
Fix this by proper u64 casting and division.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Fixes: d63c277dc6 ("drm/amdgpu: Make display watermark calculations more accurate")
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The interrupt registers are not indexed.
Fixes: 763a47b8e (drm/amdgpu: teach amdgpu how to enable interrupts for any pipe v3)
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are two identical function prototypes in same header file
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: Fix logical mistake. If CPU update failed amdgpu_vm_bo_update_mapping()
would not return and instead fall through to SDMA update. Minor change due to
amdgpu_vm_bo_wait() prototype change
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If amdgpu.vm_update_context param is set to use CPU, then Page
Directories will be updated by CPU instead of SDMA
v2: Call amdgpu_vm_bo_wait before updating the page tables to ensure the
PD/PT BOs are free
v3: Minor changes - due to amdgpu_vm_bo_wait() prototype change, local
variable declaration order and function comments.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: Add intr option
Helper function useful for CPU update of VM page tables. Also useful if
kernel have to synchronously wait till VM page tables are updated.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add VM update mode module param (amdgpu.vm_update_mode) that can used to
control how VM pde/pte are updated for Graphics and Compute.
BIT0 controls Graphics and BIT1 Compute.
BIT0 [= 0] Graphics updated by SDMA [= 1] by CPU
BIT1 [= 0] Compute updated by SDMA [= 1] by CPU
By default, only for large BAR system vm_update_mode = 2, indicating
that Graphics VMs will be updated via SDMA and Compute VMs will be
updated via CPU. And for all all other systems (by default)
vm_update_mode = 0
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Open code them so we can adjust the order in the
driver more easily.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than calling the deprecated drm_pci_init() and
drm_pci_exit() which just wrapped the pci functions
anyway.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Even if CONFIG_DRM_AMDGPU_CIK is enabled.
There is no feature parity yet for CIK, in particular amdgpu doesn't
support HDMI/DisplayPort audio without DC.
v2:
* Clarify the lack of feature parity being related to HDMI/DP audio.
* Fix "SI" typo in DRM_AMDGPU_CIK help entry.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
If AMDGPU supports SI, add a module parameter to control SI
support. It's off by default in AMDGPU as long as SI suppost is
experimental, while it is on by default in radeon.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
[ Michel Dänzer: Squash in amdgpu_si_support initialization fix ]
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
If AMDGPU supports CIK, add a module parameter to control CIK
support. It's on by default in AMDGPU, while it is off by default
in radeon.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
This overrode what queue was actually assigned for kiq.
Reviewed-by: Alex Xie <AlexBin.Xie@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was missed when Andres' queue patches were rebased.
Fixes: 42794b27 (drm/amdgpu: take ownership of per-pipe configuration v3)
Reviewed-by: Alex Xie <AlexBin.Xie@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes hangs on single MEC asics.
Fixes: 2ed286fb434 (drm/amdgpu: new queue policy, take first 2 queues of each pipe v2)
Reviewed-by: Alex Xie <AlexBin.Xie@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The same function was duplicated in all the gfx IPs. Use
a single implementation for all.
v2: use static inline (Alex Xie)
Reviewed-by: Alex Xie <AlexBin.Xie@amd.com>
Suggested-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always use the max for the family rather than the per sku limits.
This makes sure the mask is always the max size to avoid reporting
the wrong number of CUs.
Reviewed-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of taking the first pipe and giving the rest to kfd, take the
first 2 queues of each pipe.
Effectively, amdgpu and amdkfd own the same number of queues. But
because the queues are spread over multiple pipes the hardware will be
able to better handle concurrent compute workloads.
amdgpu goes from 1 pipe to 4 pipes, i.e. from 1 compute threads to 4
amdkfd goes from 3 pipe to 4 pipes, i.e. from 3 compute threads to 4
gfx9 was missed when this patch set was rebased to include gfx9.
Acked-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pipes provide better concurrency than queues, therefore we want to make
sure that apps use queues from different pipes whenever possible.
Optimize for the trivial case where an app will consume rings in order,
therefore we don't want adjacent rings to belong to the same pipe.
gfx9 was missed when these patches were rebased.
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Something writes over the first 8 MB so reserve this
on vega10 until we root cause it.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User is able to follow the ip block number to write the ip_block_mask for
selecting the one which user would like to enable.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch moves invalidation into gart enable function from hw_init.
Because we would like align the sequence calling between init and resume.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use ERR_CAST() to avoid cross-structure cast in ocf2, ntfs, and NFS.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>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=R3qn
-----END PGP SIGNATURE-----
Merge tag 'gcc-plugins-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull gcc-plugin prepwork from Kees Cook:
"Use designated initializers for mtk-vcodec, powerplay, amdgpu, and
sgi-xp. Use ERR_CAST() to avoid cross-structure cast in ocf2, ntfs,
and NFS.
Christoph Hellwig recommended that I send these fixes now, rather than
waiting for the v4.13 merge window. These are all initializer and cast
fixes needed for the future randstruct plugin that haven't been picked
up by the respective maintainers"
* tag 'gcc-plugins-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
mtk-vcodec: Use designated initializers
drm/amd/powerplay: Use designated initializers
drm/amdgpu: Use designated initializers
sgi-xp: Use designated initializers
ocfs2: Use ERR_CAST() to avoid cross-structure cast
ntfs: Use ERR_CAST() to avoid cross-structure cast
NFS: Use ERR_CAST() to avoid cross-structure cast
We are using PSP to resume firmware after suspend, and it is
resumed at where it got suspended, so we'd better save the
the context.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To simplify vce bo create
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In review, Christian would like to keep the logic
inside amdgpu_vm.c with a cost of slightly slower.
The loop is still optimized out with this patch.
v2: remove the if statement. Now it is not slower.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Spreading the load across multiple SDMA engines can increase memory
transfer performance.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Depending on usage patterns, the current LRU policy may create a
non-injective mapping between userspace ring ids and kernel rings.
This behaviour is undesired as apps that attempt to fill all HW blocks
would be unable to reach some of them.
This change forces the LRU policy to create bijective mappings only.
v2: compress ring_blacklist
v3: simplify amdgpu_ring_is_blacklisted() logic
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use an LRU policy to map usermode rings to HW compute queues.
Most compute clients use one queue, and usually the first queue
available. This results in poor pipe/queue work distribution when
multiple compute apps are running. In most cases pipe 0 queue 0 is
the only queue that gets used.
In order to better distribute work across multiple HW queues, we adopt
a policy to map the usermode ring ids to the LRU HW queue.
This fixes a large majority of multi-app compute workloads sharing the
same HW queue, even though 7 other queues are available.
v2: use ring->funcs->type instead of ring->hw_ip
v3: remove amdgpu_queue_mapper_funcs
v4: change ring_lru_list_lock to spinlock, grab only once in lru_get()
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add amdgpu_queue_mgr, a mechanism that allows disjointing usermode's
ring ids from the kernel's ring ids.
The queue manager maintains a per-file descriptor map of user ring ids
to amdgpu_ring pointers. Once a map is created it is permanent (this is
required to maintain FIFO execution guarantees for a context's ring).
Different queue map policies can be configured for each HW IP.
Currently all HW IPs use the identity mapper, i.e. kernel ring id is
equal to the user ring id.
The purpose of this mechanism is to distribute the load across multiple
queues more effectively for HW IPs that support multiple rings.
Userspace clients are unable to check whether a specific resource is in
use by a different client. Therefore, it is up to the kernel driver to
make the optimal choice.
v2: remove amdgpu_queue_mapper_funcs
v3: made amdgpu_queue_mgr per context instead of per-fd
v4: add context_put on error paths
v5: rebase and include new IPs UVD_ENC & VCN_*
v6: drop unused amdgpu_ring_is_valid_index (Alex)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tonga based asics may experience hangs when an HQD's EOP parameters
are modified.
Workaround this HW issue by avoiding writes to these registers for
tonga asics.
Based on the following ROCm commit:
2a0fb8 - drm/amdgpu: Synchronize KFD HQD load protocol with CP scheduler
From the ROCm git repository:
https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver.git
CC: Jay Cornwall <Jay.Cornwall@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MQD structure matches the reg layout. Take advantage of this to
simplify HQD programming.
Note that the ACTIVE field still needs to be programmed last.
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of taking the first pipe and giving the rest to kfd, take the
first 2 queues of each pipe.
Effectively, amdgpu and amdkfd own the same number of queues. But
because the queues are spread over multiple pipes the hardware will be
able to better handle concurrent compute workloads.
amdgpu goes from 1 pipe to 4 pipes, i.e. from 1 compute threads to 4
amdkfd goes from 3 pipe to 4 pipes, i.e. from 3 compute threads to 4
v2: fix policy comment
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of picking an arbitrary queue for KIQ, search for one according
to policy. The queue must be unused.
Also report the KIQ as an unavailable resource to KFD.
In testing I ran into KCQ initialization issues when using pipes 2/3 of
MEC2 for the KIQ. Therefore the policy disallows grabbing one of these.
v2: fix (ring.me + 1) to (ring.me -1) in amdgpu_amdkfd_device_init
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The assumption that we are only using the first pipe no longer holds.
Instead, calculate the queue_mask from the queue_bitmap.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pipes provide better concurrency than queues, therefore we want to make
sure that apps use queues from different pipes whenever possible.
Optimize for the trivial case where an app will consume rings in order,
therefore we don't want adjacent rings to belong to the same pipe.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This information is already available in adev.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the KGD to KFD interface to allow sharing pipes with queue
granularity instead of pipe granularity.
This allows for more interesting pipe/queue splits.
v2: fix overflow check for res.queue_mask
v3: fix shift overflow when setting res.queue_mask
v4: fix comment in is_pipeline_enabled()
v5: clamp res.queue_mask to the first MEC only
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current implementation is hardcoded to enable ME1/PIPE0 interrupts
only.
This patch allows amdgpu to enable interrupts for any pipe of ME1.
v2: added gfx9 support
v3: use soc15_grbm_select for gfx9
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously the queue/pipe split with kfd operated with pipe
granularity. This patch allows amdgpu to take ownership of an arbitrary
set of queues.
It also consolidates the last few magic numbers in the compute
initialization process into mec_init.
v2: support for gfx9
v3: renamed AMDGPU_MAX_QUEUES to AMDGPU_MAX_COMPUTE_QUEUES
v4: fix off-by-one in num_mec checks in *_compute_queue_acquire
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make amdgpu the owner of all per-pipe state of the HQDs.
This change will allow us to split the queues between kfd and amdgpu
with a queue granularity instead of pipe granularity.
This patch fixes kfd allocating an HDP_EOP region for its 3 pipes which
goes unused.
v2: support for gfx9
v3: fix gfx7 HPD intitialization
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename straggler instances of r(adeon)dev to a(mdgpu)dev
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The return value from copy_form_user is 0 for the success case.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the same gfx_*_mqd_commit function for kfd and amdgpu codepaths.
This removes the last duplicates of this programming sequence.
v2: fix cp_hqd_pq_wptr value
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The gfxv7 contains a slightly different version of cik_mqd called
bonaire_mqd. This can introduce subtle bugs if fixes are not applied in
both places.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle HQD deactivation timeouts instead of ignoring them.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MQD programming sequence currently exists in 3 different places.
Refactor it to absorb all the duplicates.
The success path remains mostly identical except for a slightly
different order in the non-kiq case. This shouldn't matter if the HQD
is disabled.
The error handling paths have been updated to deal with the new code
structure.
v2: the non-kiq path for gfxv8 was dropped in the rebase
v3: split MEC_HPD_SIZE rename, dropped doorbell changes
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename MEC_HPD_SIZE to GFXN_MEC_HPD_SIZE to clarify it is specific to a
gfx generation.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This isn't beneficial any more since VRAM allocations are now split
so that they fits into a single page table.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Makes it easier to update the PDE with huge pages.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the code easier to understand.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move several if statements and a loop statment from
run time to initialization time.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need program ring buffer on instance 1 register space domain,
when only if instance 1 available, with two instances or instance 0,
and we need only program instance 0 regsiter space domain for ring.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change is also useful for the upcoming changes where page tables
can be updated by CPU.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If updating the PDs fails we now invalidate all entries to try again later.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename adjust_mc_addr to get_vm_pde and check the address bits in one place.
v2: handle vcn as well, keep setting the valid bit manually,
add a BUG_ON() for GMC v6, v7 and v8 as well.
v3: handle vcn_v1_0_enc_ring_emit_vm_flush as well.
v4: fix the BUG_ON mask for GFX6-8
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Load Balancing Per Watt (LBPW) allows dynamically disable CUs
when they are idle
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
remnants from bring-up.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_device_resume() & amdgpu_device_init() have a high
time consuming call of amdgpu_late_init() which sets the
clock_gating state of all IP blocks and is blocking.
This patch defers only this setting of clock gating state
operation to post resume of amdgpu driver but ideally before
the UI comes up or in some cases post ui as well.
With this change the resume time of amdgpu_device comes down
from 1.299s to 0.199s which further helps in reducing the overall
system resume time.
V1: made the optimization applicable during driver load as well.
TEST:(For ChromiumOS on STONEY only)
* UI comes up
* amdgpu_late_init() call gets called consistently and no errors reported.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need program ring buffer on instance 1 register space domain,
when only if instance 1 available, with two instances or instance 0,
and we need only program instance 0 regsiter space domain for ring.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZK2lrAAoJEHm+PkMAQRiGm3AH/13F1DlIk05aSXHoDr/idIpR
GMHmk3YF+EuFjsL463Sh6s/SSWmz0Lda8euaoB4wCWvQFX2ZjTE+aOd79XlRiZJQ
OTtLkV9I41eXIJUpEOHia7xZiCsbw+usqcHrm1aBoSh5KKV2iQmEOrnJdibqJVOF
eXUMphNK/zFtAd2bKtQSxkaBnOOqsQUgVQSkr2K9rSg25l0KokFC6c5K5IjLn4x9
QgDY4wmMvHrDz0CtpoqlNM4XqbsDJVrFeZGfg6hlMqSRDeXeg4h3Ol0VfIT496RP
QBdrDb6hWO+HKt9B0M+7Q+8a/Fsw+5dtpqv1W/Wlr0i4CS6euU8NChAmrpkrqGo=
=m5ba
-----END PGP SIGNATURE-----
Backmerge tag 'v4.12-rc3' into drm-next
Linux 4.12-rc3
Daniel has requested this for some drm-intel-next work.
The randstruct plugin requires structures that are entirely function
pointers be initialized using designated initializers.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
KIQ is the Kernel Interface Queue for managing the MEC. Rather than setting
up rings via direct MMIO of ring registers, the rings are configured via
special packets sent to the KIQ. The allows the MEC to better manage shared
resources and certain power events. It also reduces the code paths in the
driver to support and is required for MEC powergating.
v2: drop gfx_v9_0_cp_compute_fini() as well
v3: rebase on latest changes derived from gfx8, add unmap queues on
hw_fini
v4: fix copy/paste typo in error message (Rex)
Acked-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to reset the wptr and clear the rings. The UNMAP_QUEUES
packet writes the current MQD state back the MQD on suspend,
so there is no need to reset it as well.
v2: fix from gfx8 (Rex)
Acked-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: monk liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the KCQ setup. This way we only have to wait once for the
entire MEC.
Acked-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than waiting for each queue.
Acked-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: monk liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One for KIQ and one for the KCQ. This simplifies the logic and
allows for future optimizations.
Acked-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's stored in LE format.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: bump the DRM version
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If you initiate a read that is out of the VRAM address space return
ENXIO instead of 0.
Reads that begin below that point will read upto the VRAM limit as
before.
Cc: stable@vger.kernel.org
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop the function gmc_v6_0_init_compute_vmid() since it wasn't
implemented and commented out.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up coding style in gfx_v6_0_write_harvested_raster_configs()
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That line got missed during the merge.
v2: fix vcn_v1_0_enc_ring_emit_vm_flush as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That GFX9 needs a PDE in the registers is entirely GFX9 specific.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
512 is enough for one PD entry on Vega10.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If doorbell is used for wptr update, we also need to use it
to initialize wptr to 0.
Signed-off-by: Yintian Tao <yttao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VM is mandatory for all hw amdgpu supports. So remove the leftovers
to make it optionally.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fence in dep_sync cannot be optimized.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Tested and Reviewed-by: Roger.He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update gfx9 golden settings.
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the vm is guilty of a GPU reset, skips all its jobs.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
below ioctl will return -ENODEV:
amdgpu_cs_ioctl
amdgpu_cs_wait_ioctl
amdgpu_cs_wait_fences_ioctl
amdgpu_gem_va_ioctl
amdgpu_info_ioctl
v2: only for map and replace cases in amdgpu_gem_va_ioctl
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
backup first 64 byte of gart table as reset magic, check if magic is same
after gpu hw reset.
v2: use memcmp instead of manual innovation.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for parsing the gpu info table on raven.
This is required to get the gpu config data for raven.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
only mmhub will be invalidated during vcn dec/enc vm flush
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This got missed due to differences in the trees
when raven support was merged.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: ken wang <Qingqing.Wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the RAVEN pci id.
v2: add exp flag for now (Alex)
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the ip block and enable powerplay on raven.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Based on new vcn firmware interface changes
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New firmware add psp header.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update and enable the vcn encode IB test.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wire up the callback and enable them.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the ring function callbacks for the encode rings.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not required on raven.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Needed for the proper command sequence for VCN.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hope it will be generic for vcn later
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the ring function callbacks for the decode ring.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the decode ring init.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fill in the core VCN 1.0 setup functionality.
v2: squash in fixup (Alex)
Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add encode ring and ib tests.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN is the new media block on Raven. Add core support
and the ring and ib tests for decode.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the ip block version structure for psp 10.0.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP is the security processor. These are the support
functions.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
nbio handles misc bus io operations. Handle
differences between different nbio bus versions.
v2: switch checks from RAVEN to APU (Alex)
squash in raven rev id fetch
squash in fix uninitalized hdp flush reg index for raven
v3: add some missed RAVEN to APU checks (Alex)
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
NBIO handles misc bus io functions on the chip. This
helper lib has the apppropriate functions for NBIO 7.0.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
APU fb offset is set by sbios, which is different with DGPU.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wire up the functions to control medium grained
powergating.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wire up the enable functions to enable coarse
grained powegating.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
More stuff for gfx pg.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
setup the save and restore buffers used for gfx
powergating.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Required for proper handshaking between the GFX and RLC.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fetch correct firmware for raven for gfx and sdma.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the appropriate ucode loading mechanism. Set to
direct for now.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the common golden settings for Raven.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the IP blocks for RAVEN.
v2: drop DC for upstream (Alex)
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RAVEN is a new APU.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
because if the fence is really signaled, it could already
released so the fence pointer is a wild pointer, but if
we use job->base.node we are safe because job will not
be released untill amdgpu_job_timedout finished.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1,TDR will kickout guilty job if it hang exceed the threshold
of the given one from kernel paramter "job_hang_limit", that
way a bad command stream will not infinitly cause GPU hang.
by default this threshold is 1 so a job will be kicked out
after it hang.
2,if a job timeout TDR routine will not reset all sched/ring,
instead if will only reset on the givn one which is indicated
by @job of amdgpu_sriov_gpu_reset, that way we don't need to
reset and recover each sched/ring if we already know which job
cause GPU hang.
3,unblock sriov_gpu_reset for AI family.
V2:
1:put kickout guilty job after sched parked.
2:since parking scheduler prior to kickout already occupies a
while, we can do last check on the in question job before
doing hw_reset.
TODO:
1:when a job is considered as guilty, we should mark some flag
in its fence status flag, and let UMD side aware that this
fence signaling is not due to job complete but job hang.
2:if gpu reset cause all video memory lost, we need introduce
a new policy to implement TDR, like drop all jobs not yet
signaled, and all IOCTL on this device will return ERROR
DEVICE_LOST.
this will be implemented later.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't need a scheduler for KIQ.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
that way we can know which job cause hang and
can do per sched reset/recovery instead of all
sched.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
because we don't want to do sriov-gpu-reset under certain
cases, so just split those two funtion and don't invoke
sr-iov one from bare-metal one.
V2:
remove debugfs_gpu_reset routine on SRIOV case.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
before that, we have function to check if reset happens by using reset count.
v2: always update reset count after vm flush
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: directly return for 'if' case.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this is an improvement for previous patch, the sched_sync is to store fence
that could be skipped as scheduled, when job is executed, we didn't need
pipeline_sync if all fences in sched_sync are signalled, otherwise insert
pipeline_sync still.
v2: handle error when adding fence to sync failed.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This kind of reset handling was removed a long time ago.
v2: fix warning (Alex)
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Roger.He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the root cause is vram content is lost completely after pci reset.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Roger.He <Hongbo.He@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
to cover below case:
1. A task gart bind/unbind but not add to adev->gtt_list yet
2. at this time gpu reset, gtt only recover those gtt in adev->gtt_list
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
rather than defining it locally.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
else branch is pointless if it's right at the end of function and use
unlikely() on err path.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nikola Pajkovsky <npajkovsky@suse.cz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AI affected:
CP/HW team requires KMD insert FRAME_CONTROL(end) after
the last IB and before the fence of this DMAframe.
this is to make sure the cache are flushed, and it's a must
change no matter MCBP/SR-IOV or bare-metal case because new
CP hw won't do the cache flush for each IB anymore, it just
leaves it to KMD now.
with this patch, certain MCBP hang issue when rendering
vulkan/chained-ib are resolved.
v2: drop gfx8 changes. gfx8 is not affected (Alex)
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
TMZ package will be used for VULKAN/CHAINED-IB MCBP
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
According to CP/hw team requirment, to support PAL/CHAINED-IB
MCBP, kernel driver must guarantee DE_META must be inserted
right prior to the work_load DE IB (with PREEMPT flag), there
cannot be any non-work_load DE IB between-in DE_META and
work_load DE IB.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
According to HW design, need to clean doorbell after setup MMSCH
table.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change message to debug level as VI does.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If psp version doesn't match asd version, asd loading will be
failed. Add workaround to bypass it for sriov.
Signed-off-by: Daniel Wang <Daniel.Wang2@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On vega10, some hw finish operations should not be applied in SR-IOV
case. This works as workaround to fix multi-VFs reboot/shutdown
issues.
Signed-off-by: Trigger Huang <trigger.huang@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1,this way we make those routines compatible with the sequence
requirment for both Tonga and Vega10
2,ignore PSP hw init when doing TDR, because for SR-IOV device
the ucode won't get lost after VF FLR, so no need to invoke PSP
doing the ucode reloading again.
v2: squash in ARRAY_SIZE fix
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if sriov gpu reset is invoked by job timeout, it is run
in a global work-queue which is very slow and better not call
msleep ortherwise it takes long time to get back CPU.
so make below changes:
1: Change msleep 1 to mdelay 5
2: Ignore the ack fail from pf after time out,
because VF FLR will clear ack, sometime VF FLR is done
prior to the beginning of poll_ack so we can ignore this ack
TODO:
Put job_timedout (and the following gpu reset) in a driver thread,
instead of the global work_struct.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this is to prevent fence forever waiting if FLR occured
during register accessing.
v2:
use define instead of hardcode for the timeout msec
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to make sure the various init sequences submitted
to KIQ complete before testing the rings.
Reviewed-by: monk liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Will be used in subsequent commits rather rather than
magic numbers.
Reviewed-by: monk liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And properly synchronize them with the master during
queue init.
Reviewed-by: monk liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The usage of kiq should not depend on the virtualization.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by:Andres Rodriquez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Interface to reserve a vmid for a specific process to
add in shader debugging that requries a fixed vmid.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the vmid reservation.
v2: move sync waiting only when flush needs
v3: fix racy
v4: peek fence instead of get fence, and fix potential context starved.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Limit reserved vmids to 1 to avoid taking too many
out of commission and starving the system.
v2: move #define to amdgpu_vm.h
v3: move reserved vmid counter to id_manager,
and increase counter before allocating vmid
v4: rename to reserved_vmid_num
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add reserve/unreserve vmid funtions. Used to reserve
vmids for certain shader debugging functionality that
required a fixed vmid for the life of the debug.
v3:
only reserve vmid from gfxhub
v4:
fix racy condition
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It will be used for reserving vmid for shader debugging
that requires a fixed vmid.
v2: fix warning (Alex)
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support for MCBP/Virtualization in combination with chained IBs is
formal released on firmware feature version #46. So enable it
according to firmware feature version, otherwise, world switch will
hang.
Signed-off-by: Trigger Huang <trigger.huang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bug: SWDEV-117987: Always on CU mask broken for gfx7+
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change place of virt_init_setting function so that can cover the
cg and pg flags configuration.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPU hypervisor cover all settings of CG and PG, so guest doesn't
need to do anything. Bypass it.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only per family registers are still used.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I couldn't figure out what this was original good for, but we
don't use it any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Xiaojie Yuan <Xiaojie.Yuan@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I'm not sure if the order matters, but it seems like it makes
more sense to set this after the range is programmed.
v2: rebase (Alex)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add set_doorbell functions for mec and cpg.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This could be used in Andres' priority scheduling patch
as well.
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Even if we disable clockgating, we still need to make sure the
cp/rlc interrupts are enabled for powergating which might still
be enabled.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Even if we disable clockgating, we still need to make sure the
cp/rlc interrupts are enabled for powergating which might still
be enabled.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's global, not queue specific, so move it out of the
kiq register init function.
Tested-and-Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to reset the wptr and clear the rings. The UNMAP_QUEUES
packet writes the current MQD state back the MQD on suspend,
so there is no need to reset it as well.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the UNMAP_QUEUES packet to have the KIQ properly
disable them.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the KCQ setup. This way we only have to wait once for the
entire MEC.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One for KIQ and one for the KCQ. This simplifies the logic and
allows for future optimizations.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to make sure the various init sequences submitted
to KIQ complete before testing the rings.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-enable GFX PG. It's working properly with MEC now that KIQ is
enabled.
Reviewed-by: Samuel Li <samuel.li@amd.com>
This reverts commit e9ef19aa1bdeac380662a112f1d03a7c3477527f.
KIQ is the Kernel Interface Queue for managing the MEC. Rather than setting
up rings via direct MMIO of ring registers, the rings are configured via
special packets sent to the KIQ. The allows the MEC to better manage shared
resources and certain power events.
v2: squash in s3/s4 fix from Rex
v3: further fixes from Rex
Signed-off-by: David Panariti <David.Panariti@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing chips to the doorbell range setup. These
were missed in the KIQ code. Fixes power and performance
regressions with KIQ. Spotted by Rex.
Tested-and-Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to properly set the MTYPE and ROQ space setting.
This should fix performance regressions with KIQ enabled.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Taken care of by gpu info firmware now.
v2: rebase
v3: rework based on latest firmware
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Tested-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And populate the gfx structures from it.
v2: update the structures updated by the table
v3: rework based on new table structure
v4: simplify things
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Tested-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new gpu info firmware to store gpu specific configuration
data. This allows us to store hw constants in a unified place.
v2: adjust structure and elements
v3: further restructure
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Tested-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Even if the vblank period would allow it, it still seems to
be problematic on some cards.
v2: fix logic inversion (Nils)
bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868
Cc: stable@vger.kernel.org
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reinitializing the VM manager during suspend/resume is a very very bad
idea since all the VMs are still active and kicking.
This can lead to random VM faults after resume when new processes
become the same client ID assigned.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Even if the vblank period would allow it, it still seems to
be problematic on some cards.
v2: fix logic inversion (Nils)
bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868
Cc: stable@vger.kernel.org
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reinitializing the VM manager during suspend/resume is a very very bad
idea since all the VMs are still active and kicking.
This can lead to random VM faults after resume when new processes
become the same client ID assigned.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Now that drm_[cm]alloc* helpers are simple one line wrappers around
kvmalloc_array and drm_free_large is just kvfree alias we can drop
them and replace by their native forms.
This shouldn't introduce any functional change.
Changes since v1
- fix typo in drivers/gpu//drm/etnaviv/etnaviv_gem.c - noticed by 0day
build robot
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Michal Hocko <mhocko@suse.com>drm: drop drm_[cm]alloc* helpers
[danvet: Fixup vgem which grew another user very recently.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517122312.GK18247@dhcp22.suse.cz
UAPI Changes:
- Return -ENODEV instead of -ENXIO when creating cma fb w/o valid gem (Daniel)
- Add aspect ratio and custom scaling propertis to connector state (Maarten)
Cross-subsystem Changes:
- None
Core Changes:
- Add Laurent as bridge reviewer and Andrzej as bridge maintainer (Archit)
- Maintain new STM driver through -misc (Yannick)
- Misc doc improvements (as is tradition) (Daniel)
- Add driver-private objects to atomic state (Dhinakaran)
- Deprecate preclose hook in modern drivers (use postclose) (Daniel)
- Add hwmode to vblank struct. This fixes mode access in irq context and reduced
a bunch of boilerplate (Daniel)
Driver Changes:
- vc4: Add out-fence support to vc4 V3D rendering (Eric)
- stm: Add stm32f429 display hw and am-480272h3tmqw-t01h panel support (Yannick)
- vc4: Remove 256MB cma limit from vc4 (Eric)
- dw-hdmi: Disable audio when inactive, instead of always enabled (Romain)
- zte: Add support for VGA to the ZTE driver (Shawn)
- i915: Track DP MST bandwidth and check it in atomic_check (Dhinakaran)
- vgem: Enable gem dmabuf import iface to facilitate ion testing (Laura)
- vc4: Add support for Cygnus (new dt compat string + couple bug fixes) (Eric)
- pl111: Add driver for pl111 CLCD display controller (Eric/Tom)
- vgem: Subclass drm_device instead of standalone platform device (Chris)
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Romain Perier <romain.perier@collabora.com>
Cc: Navare, Manasi D <manasi.d.navare@intel.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tom Cooksey <tom.cooksey@arm.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
* tag 'drm-misc-next-2017-05-16' of git://anongit.freedesktop.org/git/drm-misc: (72 commits)
drm: add missing declaration to drm_blend.h
drm/dp: Wait up all outstanding tx waiters
drm/dp: Read the tx msg state once after checking for an event
drm/prime: Forward declare struct device
drm/vblank: Lock down vblank->hwmode more
drm/vblank: drop the mode argument from drm_calc_vbltimestamp_from_scanoutpos
drm/vblank: Add FIXME comments about moving the vblank ts hooks
drm/vblank: Switch to bool in_vblank_irq in get_vblank_timestamp
drm/vblank: Switch drm_driver->get_vblank_timestamp to return a bool
drm/vgem: Convert to a struct drm_device subclass
gpu: drm: gma500: remove dead code
drm/sti: Adjust two checks for null pointers in sti_hqvdp_probe()
drm/sti: Fix typos in a comment line
drm/sti: Fix a typo in a comment line
drm/sti: Replace 17 seq_puts() calls by seq_putc()
drm/sti: Reduce function calls for sequence output at five places
drm/sti: use seq_puts to display a string
drm: Nerf the preclose callback for modern drivers
drm/exynos: Merge pre/postclose hooks
drm/tegra: switch to postclose
...
Fixes for 4.12. This is a bit bigger than usual since it's 3 weeks
worth of fixes and most of these changes are for vega10 which is
new for 4.12 and still in a fair amount of flux. It looks like
you missed my last pull request, so those patches are included here
as well. Highlights:
- Lots of vega10 fixes
- Fix interruptable wait mixup
- Fan control method fixes
- Misc display fixes for radeon and amdgpu
- Misc bug fixes
* 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux: (132 commits)
drm/amd/powerplay: refine pwm1_enable callback functions for CI.
drm/amd/powerplay: refine pwm1_enable callback functions for vi.
drm/amd/powerplay: refine pwm1_enable callback functions for Vega10.
drm/amdgpu: refine amdgpu pwm1_enable sysfs interface.
drm/amdgpu: add amd fan ctrl mode enums.
drm/amd/powerplay: add more smu message on Vega10.
drm/amdgpu: fix dependency issue
drm/amd: fix init order of sched job
drm/amdgpu: add some additional vega10 pci ids
drm/amdgpu/soc15: use atomfirmware for setting bios scratch for reset
drm/amdgpu/atomfirmware: add function to update engine hang status
drm/radeon: only warn once in radeon_ttm_bo_destroy if va list not empty
drm/amdgpu: fix mutex list null pointer reference
drm/amd/powerplay: fix bug sclk/mclk level can't be set on vega10.
drm/amd/powerplay: Setup sw CTF to allow graceful exit when temperature exceeds maximum.
drm/amd/powerplay: delete dead code in powerplay.
drm/amdgpu: Use less generic enum definitions
drm/amdgpu/gfx9: derive tile pipes from golden settings
drm/amdgpu/gfx: drop max_gs_waves_per_vgt
drm/amd/powerplay: disable engine spread spectrum feature on Vega10.
...
Use the new enums for setting and getting the fan control mode.
Fixes problems due to previous inconsistencies between enums.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the interface consistent.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The problem is that executing the jobs in the right order doesn't give you the right result
because consecutive jobs executed on the same engine are pipelined.
In other words job B does it buffer read before job A has written it's result.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to use the atomfirmware interface rather than atombios since
soc15 is atomfirmware based.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the scratch reg for when the engine is hung.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we restrict this helper to only kms drivers (which is the case) we
can look up the correct mode easily ourselves. But it's a bit tricky:
- All legacy drivers look at crtc->hwmode. But that is updated already
at the beginning of the modeset helper, which means when we disable
a pipe. Hence the final timestamps might be a bit off. But since
this is an existing bug I'm not going to change it, but just try to
be bug-for-bug compatible with the current code. This only applies
to radeon&amdgpu.
- i915 tries to get it perfect by updating crtc->hwmode when the pipe
is off (i.e. vblank->enabled = false).
- All other atomic drivers look at crtc->state->adjusted_mode. Those
that look at state->requested_mode simply don't adjust their mode,
so it's the same. That has two problems: Accessing crtc->state from
interrupt handling code is unsafe, and it's updated before we shut
down the pipe. For nonblocking modesets it's even worse.
For atomic drivers try to implement what i915 does. To do that we add
a new hwmode field to the vblank structure, and update it from
drm_calc_timestamping_constants(). For atomic drivers that's called
from the right spot by the helper library already, so all fine. But
for safety let's enforce that.
For legacy driver this function is only called at the end (oh the
fun), which is broken, so again let's not bother and just stay
bug-for-bug compatible.
The benefit is that we can use drm_calc_vbltimestamp_from_scanoutpos
directly to implement ->get_vblank_timestamp in every driver, deleting
a lot of code.
v2: Completely new approach, trying to mimick the i915 solution.
v3: Fixup kerneldoc.
v4: Drop the WARN_ON to check that the vblank is off, atomic helpers
currently unconditionally call this. Recomputing the same stuff should
be harmless.
v5: Fix typos and move misplaced hunks to the right patches (Neil).
v6: Undo hunk movement (kbuild).
Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-4-daniel.vetter@ffwll.ch
It's overkill to have a flag parameter which is essentially used just
as a boolean. This takes care of core + adjusting drivers.
Adjusting the scanout position callback is a bit harder, since radeon
also supplies it's own driver-private flags in there.
v2: Fixup misplaced hunks (Neil).
v3: kbuild says v1 was better ...
Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-2-daniel.vetter@ffwll.ch
There's really no reason for anything more:
- Calling this while the crtc vblank stuff isn't set up is a driver
bug. Those places alrready DRM_ERROR.
- Calling this when the crtc is off is either a driver bug (calling
drm_crtc_handle_vblank at the wrong time) or a core bug (for
anything else). Again, we DRM_ERROR.
- EINVAL is checked at higher levels already, and if we'd use struct
drm_crtc * instead of (dev, pipe) it would be real obvious that
those are again core bugs.
The only valid failure mode is crap hardware that couldn't sample a
useful timestamp, to ask the core to just grab a not-so-accurate
timestamp. Bool is perfectly fine for that.
v2: Also fix up the one caller, I lost that in the shuffling (Jani).
v3: Fixup commit message (Neil).
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-1-daniel.vetter@ffwll.ch
set_memory_* functions have moved to set_memory.h. Switch to this
explicitly.
[akpm@linux-foundation.org: track drivers/gpu/drm/i915/i915_gem_gtt.c linux-next changes]
Link: http://lkml.kernel.org/r/1488920133-27229-8-git-send-email-labbott@redhat.com
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
alpha:allmodconfig fails to build as follows.
drivers/gpu/drm/amd/amdgpu/amdgpu.h:1006:2: error:
expected identifier before '(' token
drivers/gpu/drm/amd/amdgpu/amdgpu.h:1011:28: error:
'NGG_BUF_MAX' undeclared here
The problem is not really the enum definition of NGG_BUF_MAX but PARAM,
which happens to be defined differently for alpha and a couple of other
architectures.
Use less generic defines for NGG enums to solve the problem.
Fixes: bce23e00f3 ("drm/amdgpu: add NGG parameters")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We already have this info: max_gs_threads. Drop the duplicate.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if bo->shadow is NULL (race issue:BO shadow was just released
and gpu-reset kick in but BO hasn't yet) recover_vram_from_shadow
won't set @next, so the following "fence=next"
will wrongly use a fence pointer which may already dirty.
fixing it by set next to NULL prior to recover_vram_from_shadow
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou<david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
otherwise we'll lost the high 32 bit for pte, which lead
to incorrect MTYPE for vega10.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Firmware used reg set 2 for tlb invalidation. AMDGPU can start from reg
set 3 to avoid the conflict. AMDKFD will use the reg set 0 or 1 when
necesary.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewws-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new RIDs.
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Xie <AlexBin.Xie@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit cb341a319f.
The purpose of the refactor was for amdgpu_crtc_prepare/submit_flip to
be used by the DC code, but that's no longer the case.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of these paths probably cannot be interrupted by a signal anyway.
Those that can would fail to clean up things if they actually got
interrupted.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the case could happen when gpu reset:
1. when gpu reset, cs can be continue until sw queue is full, then push job will wait with holding pd reservation.
2. gpu_reset routine will also need pd reservation to restore page table from their shadow.
3. cs is waiting for gpu_reset complete, but gpu reset is waiting for cs releases reservation.
v2: handle amdgpu_cs_submit error path.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: 64-bit aligned for gpu info
v3: squash in wave_front_fix
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Qiang Yu <Qiang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those functions are all unused and some not even implemented.
v2: keep cgs_get_pci_resource, it is used by the ACP driver.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no good mechanism to handle the corresponding error.
When signal interrupt happens, unpin is not called.
As a result, inside AMDGPU, the statistic of pin size will be wrong.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Either in cgs functions or for callers of cgs functions:
1. The signal interrupt can affect the expected behaviour
2. There is no good mechanism to handle the corresponding error
3. There is no chance of deadlock in these single BO waiting
4. There is no clear benefit for interruptible waiting
5. Future caller of these functions might have same issue.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. The signal interrupt can affect the expected behaviour.
2. There is no good mechanism to handle the corresponding error.
When signal interrupt happens, unpin is not called.
As a result, inside AMDGPU, the statistic of pin size will be wrong.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. The signal interrupt can affect the expected behaviour.
2. There is no good mechanism to handle the corresponding error.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. The signal interrupt can affect the expected behaviour.
2. There is no good mechanism to handle the corresponding error.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. The signal interrupt can affect the expected behaviour.
2. There is no mechanism to handle the corresponding error.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If amdgpu_bo_reserve function is interrupted by signal,
amdgpu_bo_kunmap function is not called.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This apparently got lost when implementing the new DCE-6 support
and would cause failures in pageflip scheduling and timestamping.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable UVD block for SRIOV.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add UVD hw init.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add UVD doorbell for SRIOV.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add UVD initialization for SRIOV.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used virt_alloc_mm_table function to allocate MM table memory.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add two functions to allocate & free MM table memory.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move mm table construction functions into mmsch header file so that
UVD can reuse it.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixed PSP loading issue for sriov.
Signed-off-by: Daniel Wang <Daniel.Wang2@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now GPU hypervisor will load SDMA and RLCG ucode, so skip it
in guest.
Signed-off-by: Daniel Wang <Daniel.Wang2@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ 132.036658] amdgpu 0000:22:00.0: VM IB without ID
[ 132.036709] [drm:amdgpu_job_run [amdgpu]] *ERROR* Error scheduling IBs (-22)
[ 132.036755] [drm:amd_sched_main [amdgpu]] *ERROR* Failed to run job!
root cause is fence is signaled during sync transfer.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to check if the VM is swapped out before trying to update it.
Fixes: 23e0563e48 ("drm/amdgpu: clear freed mappings immediately when BO may be freed")
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
BOs not mapped into the GART are always valuable for an eviction. Otherwise we
don't correctly swap them out on VRAM evictions during memory pressure.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix PRT handling on gfx9
v2: unify PRT bit for all ASICs
v3: move PRT flag checking in amdgpu_vm_bo_split_mapping()
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: David Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use amdgpu_vm_bo_update_mapping() instead of amdgpu_vm_bo_split_mapping() here.
We don't want any flags set in the cleared areas and splitting
shouldn't be necessary.
v2: fix typo in commit message
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Fix issue that PSP initialization will fail if reload amdgpu module.
That's because the PSP ring must be destroyed to be ready for the
next time PSP initialization.
Changes in v2:
- Move psp_ring_destroy before all BOs free (suggested by
Ray Huang).
Changes in v3:
- Check firmware load type, if it is not PSP, we should do
nothing in fw_fini(), and of course will not destroy
PSP ring too (suggested by Ray Huang).
Signed-off-by: Trigger Huang <trigger.huang@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So it's more obvious which rings are using which INV engines.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
umr expects the ring name to be a complete word. This also
makes it consistent with GFXv7/8.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
umr expects the ring name to be a complete word. This also
makes it consistent with GFXv7/8.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if we set only lowest mclk level enabled,
when we enable uvd dpm during boot time,
mclk will be fixed in the lowest level.
the mclk switch will fail if try to enable
other level of mclk at this time.
so set all mclk levels enabled.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV doesn't need clockgating, bypass it.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV doesn't need CG, so bypass it.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Based on commit "drm/radeon: remove useless and potentially wrong message".
The size of the info printing is incorrect and the PCI subsystems prints
the same info on boot anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The interrupt after FLR is missed sometimes due to hardware reason, so
guest driver get the notification of FLR completion via polling
message. Then host doesn't write VALID bit to avoid sending interrupt,
otherwise the completion will be handled twice.
So there's a valid message without VALID bit for FLR completion,
driver should handle it without checking.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was incorrect for SI.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
fixed in: "drm/amdgpu:fix race condition"
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trace on which hub we are doing the flush.
v2: fix typo in commit message
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trace on which VMHUB we assigned an VMID.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable concurrent VM flushes for Vega10.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Vega10 we have 18 VM invalidation engines for each VMHUB.
Start to assign them manually to the rings.
v2: add a BUG_ON if we use to many engines
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop invalidating both hubs from each engine.
v2: don't use hardcoded values
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way GFX and MM won't fight for VMIDs any more.
Initially disabled since we need to stop flushing all HUBS
at the same time as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David suggested this a long time ago, instead of checking
each ring just walk over all the VMIDs in reverse LRU order.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the info which ring belonging to which VMHUB.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now VCE block can work for SRIOV, enable ring & ib test.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add VCE ring test slow workaround for SRIOV.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the initialization sequence of VCE to make VCE work.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In Tonga's virtualization environment, for firmware UCODE_ID_STORAGE,
there is no actual firmware data, but we still need alloc a BO and
tell the BO's mc address to HW, or world switch will hang on VFs.
v2: fix coding style (Alex)
Signed-off-by: Trigger Huang <trigger.huang@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ASIC_INIT_COMPLETE bit must be cleared during S3 resuming phase,
because VBIOS will check the bit to decide if execute ASIC_Init
posting via kernel driver.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fence buf needs to be used on suspend/resume phase.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sequence is protected by spinlock so don't access sequence
in paramter seq when invoking this function.
~0 means to get the latest sequence number and 0 means none to
get.
Change-Id: Ib7a03f3cf5594deeb4ad333cc59b47a6bddfd1ad
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework in order to properly support suspend.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework in order to properly support suspend.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework in order to properly support suspend.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework in order to properly support suspend.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework in order to properly support suspend.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Last drm-misc-next pull req for 4.12
Core changes:
- fb_helper checkpatch cleanup and simplified _add_one_connector() (Thierry)
- drm_ioctl and drm_sysfs improved/gained documentation (Daniel)
- [ABI] Repurpose reserved field in drm_event_vblank for crtc_id (Ander)
- Plumb acquire ctx through legacy paths to avoid lock_all and legacy_backoff
(Daniel)
- Add connector_atomic_check to check conn constraints on modeset (Maarten)
- Add drm_of_find_panel_or_bridge to remove boilerplate in drivers (Rob)
Driver changes:
- meson moved to drm-misc (Neil)
- Added support for Amlogic GX SoCs in dw-hdmi (Neil)
- Rockchip unbind actually cleans up the things bind initializes (Jeffy)
- A couple misc fixes in virtio, dw-hdmi
NOTE: this also includes a backmerge of drm-next as well rc5 (we needed vmwgfx
as well as the new synopsys media formats)
* tag 'drm-misc-next-2017-04-07' of git://anongit.freedesktop.org/git/drm-misc: (77 commits)
Revert "drm: Don't allow interruptions when opening debugfs/crc"
drm: Only take cursor locks when the cursor plane exists
drm/vmwgfx: Fix fbdev emulation using legacy functions
drm/rockchip: Shutdown all crtcs when unbinding drm
drm/rockchip: Reorder drm bind/unbind sequence
drm/rockchip: analogix_dp: Disable clock when unbinding
drm/rockchip: vop: Unprepare clocks when unbinding
drm/rockchip: vop: Enable pm domain before vop_initial
drm/rockchip: cdn-dp: Don't unregister audio dev when unbinding
drm/rockchip: cdn-dp: Don't try to release firmware when not loaded
drm: bridge: analogix: Destroy connector & encoder when unbinding
drm: bridge: analogix: Disable clock when unbinding
drm: bridge: analogix: Unregister dp aux when unbinding
drm: bridge: analogix: Detach panel when unbinding analogix dp
drm: Don't allow interruptions when opening debugfs/crc
drm/virtio: don't leak bo on drm_gem_object_init failure
drm: bridge: dw-hdmi: fix input format/encoding from plat_data
drm: omap: use common OF graph helpers
drm: convert drivers to use drm_of_find_panel_or_bridge
drm: convert drivers to use of_graph_get_remote_node
...
V2: remove **array method, directly fence_put after fence wait.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <chrstian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The offset must be 64bit and add back the accidential dropped line.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By default, the value is set by individual gmc.
if a specific value is input, it overrides the global value for all
v2: create helper funcs
v3: update gmc9 APU's num_level athough it may be updated in the future.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At dot clocks > approx. 250 Mhz, some of these calcs will overflow and
cause miscalculation of latency watermarks, and for some overflows also
divide-by-zero driver crash ("divide error: 0000 [#1] PREEMPT SMP" in
"dce_v10_0_latency_watermark+0x12d/0x190").
This zero-divide happened, e.g., on AMD Tonga Pro under DCE-10,
on a Displayport panel when trying to set a video mode of 2560x1440
at 165 Hz vrefresh with a dot clock of 635.540 Mhz.
Refine calculations to avoid the overflows.
Tested for DCE-10 with R9 380 Tonga + ASUS ROG PG279 panel.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Avoid big roundoff errors in scanline/hactive durations for
high pixel clocks, especially for >= 500 Mhz, and thereby
program more accurate display fifo watermarks.
Implemented here for DCE 6,8,10,11.
Successfully tested on DCE 10 with AMD R9 380 Tonga.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Migration to VRAM will break the sharing, resulting in rendering on the exporting GPU never becoming
visible on the importing GPU.
v2: Don't pin BOs to GTT. Instead, refuse to migrate them out of GTT.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Any use of the framebuffer will migrate it to VRAM, which is not sensible for
an imported dma-buf.
v2: Use DRM_DEBUG_KMS to prevent userspace accidentally spamming dmesg.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
CC: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A few more things for 4.12:
- ttm and amdgpu support for non-contiguous vram CPU mappings
- lots of bug fixes and cleanups for vega10
- misc bug fixes and code cleanups
[airlied: fix do_div error on 32-bit arm, not sure it's 100% correct]
* 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux: (58 commits)
drm/amdgpu: use uintptr_t instead of unsigned long to store pointer
drm/amdgpu: Avoid using signed integer to store pointer value
drm/amdgpu:invoke new implemented AI MB func
drm/amdgpu/vega10:timeout set to equal with VI
drm/amdgpu:implement the reset MB func for vega10
drm/amdgpu:fix typo for mxgpu_ai
drm/amdgpu:no need to involv HDP in KIQ
drm/amdgpu:add PSP block only load_type=PSP (v2)
drm/amdgpu/smu9: update to latest driver interface
drm/amd/amdgpu: cleanup gfx_v9_0_gpu_init()
drm/amd/amdgpu: cleanup gfx_v9_0_rlc_reset()
drm/amd/amdgpu: cleanup gfx_v9_0_rlc_start()
drm/amd/amdgpu: simplify gfx_v9_0_cp_gfx_enable()
drm/amd/amdgpu: cleanup gfx_v9_0_kiq_init_register()
drm/amd/amdgpu: Drop gfx_v9_0_print_status()
drm/amd/amdgpu: cleanup gfx_v9_0_set_gfx_eop_interrupt_state()
drm/amd/amdgpu: cleanup gfx_v9_0_set_priv_reg_fault_state()
drm/amd/amdgpu: cleanup gfx_v9_0_set_priv_inst_fault_state()
drm/amd/amdgpu: cleanup gfx_v9_0_init_queue()
drm/amdgpu: Move function amdgpu_has_atpx near other similar functions
...
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the sr-iov mailbox for soc15 asics.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
they are lack in the bringup stage, we need them for GPU reset
feature.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1,KIQ won't touch VRAM so no need to involv HDP flush/invalidate at all.
2,According to CP hw designer KIQ better not use any PM4 package lead to wait behave.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SRIOV currently only can load ucode directly, and PSP
block is not supported by VF temporarily.
will remove this restrict and use PSP load all ucode
even for SRIOV later
v2: squash in check against module parameter
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new WREG32_FIELD15 macro
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new WREG32_FIELD15 macro
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new WREG32_FIELD15 macro
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new WREG32_FIELD macro
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not used in gfx 6/7/8 so drop it from gfx 9 as well.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new WREG32_FIELD15 macro.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new WREG32_FIELD15 macro.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new WREG32_FIELD15 macro.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce WREG32_FIELD15 macro for SOC15 architectures.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need an array of pointers to IRQ sources, not an array of sources.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Had the wrong sense in the loop
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The two hubs are just instances of the same hardware,
so the register bits are identical.
v2: keep the function pointer
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set reasonable defaults per family.
v2: set both of them in gmc
v3: move vm size and block size in vm manager
v4: squash in warning fix from Alex Xie
v5: squash in min() warning fix
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up a toggle with ?:.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Swap read/write pattern for WREG32_FIELD()
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Swap read/write pattern for WREG32_FIELD()
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new WREG32_FIELD_OFFSET() to clean up code.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The two hubs are just instances of the same hardware,
so the register bits are identical.
v2: only remove get_vm_protection_bits for now
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This avoids merging them together on page fault.
v2: squash in 64-bit division fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Atomic helpers really want this instead of the hacked-up legacy
backoff trick, which unfortunately prevents drivers from using their
own private drm_modeset_locks.
Aside: There's a few atomic drivers (nv50, vc4, soon vmwgfx) which
don't yet use the new atomic color mgmt/gamma table stuff. Would be
nice if they could switch over and just hook up
drm_atomic_helper_legacy_gamma_set() instead.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-13-daniel.vetter@ffwll.ch
Implement AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS using TTM_PL_FLAG_CONTIGUOUS
instead of a placement limit. That allows us to better handle CPU
accessible placements.
v2: prevent virtual BO start address from overflowing
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should probably rename amdgpu_gart_funcs sooner or later.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove some of the extra checks where they don't hurt us.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Abort early if there is nothing todo and correctly indent the "if"s.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The name is a bit confusing and the extra "? true : false" is superflous.
Additional to that remove setting the reset counter directly after checking it.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used any more.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Try to clean up amdgpu.h.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Match our defines with what the hw uses.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We will probably never see this combination.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows the driver to handle io_mem mappings on their own.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vega10 is the only soc15 asic at the moment so these
warnings are invalid, but add a default case to silence
the warnings.
Fixes: 220ab9bd1c: "drm/amdgpu: soc15 enable (v3)"
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On KB, KV, CZ we should read the vram width from integrated system
table, if we can. The NOOFCHAN in MC_SHARED_CHMAP is not accurate.
With this change we can enable two 4k displays on CZ again. This use
case was broken sometime in January when we started looking at
vram_width for bandwidth calculations instead of hardcoding this value.
v2:
Return 0 if integrated system info table is not available.
Tested-by: Roman Li <roman.li@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
break it out from the check parameters function.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We accidentally dereference "cb" if the kmalloc() fails.
Fixes: 451bc8eb8f ("drm/amdgpu: fix PRT teardown on VM fini v3")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Continuing if the GPU fails to resume will end in pain.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This only makes a difference for 32-bit systems. The idea is to have a
fixed virtual address space size with 4-level page tables and to
minimize differences between 32 and 64-bit systems.
v2: Update commit message.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-misc for 4.12:
Core:
- Removed some fb subsampling dimension checks from core (Ville)
- Some MST slot cleanup (Dhinakaran)
- Extracted drm_debugfs.h & drm_ioctl.h from drmP.h (Daniel)
- Added drm_atomic_helper_shutdown() to compliment suspend/resume counterparts
(Daniel)
- Pipe context through legacy modeset to remove legacy_backoff nasties (Daniel)
- Cleanups around vblank as well as allowing lockless counter reads (Chris W.)
- VGA Switcheroo added to MAINTAINERS with Lukas Wunner as reviewer (Lukas)
Drivers:
- Enhancements to rockchip driver probe (Jeffy) and dsi (Chris Z.)
- Thunderbolt external GPU awareness added (Lukas)
* tag 'drm-misc-next-2017-03-31' of git://anongit.freedesktop.org/git/drm-misc: (63 commits)
apple-gmux: Don't switch external DP port on 2011+ MacBook Pros
drm/nouveau: Don't register Thunderbolt eGPU with vga_switcheroo
drm/amdgpu: Don't register Thunderbolt eGPU with vga_switcheroo
drm/radeon: Don't register Thunderbolt eGPU with vga_switcheroo
PCI: Recognize Thunderbolt devices
MAINTAINERS: Add Lukas Wunner as reviewer for vga_switcheroo
drm: Fix locking gotcha in page_flip ioctl
drm: Clarify the role of plane_state argument to drm_simple update().
drm: Clear e after kfree in drm_mode_page_flip_ioctl
drm: Convert cmpxchg(bool) back to a two step operation
drm/bridge: ti-tfp410: support hpd via gpio
drm: use .hword to represent 16-bit numbers
Revert unrelated part of "drm: simplify the locking in the GETCRTC ioctl"
drm: Fixup failure paths in drm_atomic_helper_set_config
drm: Peek at the current counter/timestamp for vblank queries
drm: Refactor vblank sequence number comparison
drm: vblank cannot be enabled if dev->irq_enabled is false
drm: Mark up accesses of vblank->enabled outside of its spinlock
drm: Make the decision to keep vblank irq enabled earlier
drm/atomic-helper: Remove the backoff hack from set_config
...
An external Thunderbolt GPU can neither drive the laptop's panel nor be
powered off by the platform, so there's no point in registering it with
vga_switcheroo. In fact, when the external GPU is runtime suspended,
vga_switcheroo will cut power to the internal discrete GPU, resulting in
a lockup. Moreover AMD's Windows driver special-cases Thunderbolt as
well.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: http://patchwork.freedesktop.org/patch/msgid/701a8e89ce8ac39734736ab779558b6a4042a19e.1489145162.git.lukas@wunner.de
drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c:187:2: warning: right shift count >= width of type [enabled by default]
drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c:173:2: warning: right shift count >= width of type [enabled by default]
drivers/gpu/drm/amd/amdgpu/vega10_ih.c:106:3: warning: right shift count >= width of type [enabled by default]
v2: Add a space between "&" and "0xff"
Reported by: kbuild-all@01.org
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not sure what the original intention was here, but returning a random piece of
kernel memory to userspace because we didn't set the value at all is clearly
not a good idea.
This patch disallows reading the register and returns
a proper error code instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove duplicate mmCP_CPF_BUSY_STAT from the allowed registers.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SRIOV can support for loading ucode with PSP block, enable it.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable pp block if device is vf.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Confirm if sys driver and sOS are already been loaded through sOS
sign register, skip loading sys driver and sOS if finding the sign.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On gfx9 hardware the value is not wrapped and is a 64-bit value. So
we reduce it modulo the ring size.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
(v2) use buf_mask instead of computing on the fly
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the start/end address calculation for address ranges that span
multiple page directories in amdgpu_vm_alloc_levels.
Add error messages if page tables aren't found. Otherwise the page
table update would just fail silently.
v2:
* Change WARN_ON to WARN_ON_ONCE
* Move masking of high address bits to caller
* Add range-check for "from" and "to"
v3:
* Replace WARN_ON_ONCE in get_pt with pr_err in caller
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
adev->family is not initialized yet when amdgpu_get_block_size is
called. Use adev->asic_type instead.
Minimum VM size is 512GB, not 256GB, for a single page table entry
in the root page table.
gmc_v9_0_vm_init is called after adev->vm_manager.max_pfn is
initialized. Move the minimum VM-size enforcement ahead of max_pfn
initializtion. Cast to 64-bit before the left-shift.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With 4-level page tables the maximum VM size is 256TB. That's 64G
pages, which can't be represented in 32-bit.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That register is marked deprecated, reading it results in a bus error.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: fix for all sdma engines
v3: squash in fix for SI/CI
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. security firmware loading has moved to sw init, so this code
is useless.
2. it seems that driver could not call request_firmware on
kernel 2.6, when S3 resume. for request firmware depends on
userspace, at this time, userspace is freeze.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When VRAM pressue and trigger huge evictions there is performance drop,
this patch fix it.
Signed-off-by: Roger.He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up the VM fault message format and use rate-limiting similar
to other ASICs.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The RB harvest registers are not necessary, the driver already
exposes this info via the info ioctl. GB_BACKEND_MAP has
been deprecated since SI and is not relevant to the RB mapping.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Required for SR-IOV and saves MMIO transactions.
v2: drop cached RB harvest registers
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We check the mem config register to make sure it's been
programmed by the vbios to determine if we need to post
so we check for a non-0 value. However, when the asic
comes out of reset, we may see all ones here, so check
for that too.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1) Adapt to vulkan:
Now use double SWITCH BUFFER to replace the 128 nops w/a,
because when vulkan introduced, umd can insert 7 ~ 16 IBs
per submit which makes 256 DW size cannot hold the whole
DMAframe (if we still insert those 128 nops), CP team suggests
use double SWITCH_BUFFERs, instead of tricky 128 NOPs w/a.
2) To fix the CE VM fault issue when MCBP introduced:
Need one more COND_EXEC wrapping IB part (original one us
for VM switch part).
this change can fix vm fault issue caused by below scenario
without this change:
>CE passed original COND_EXEC (no MCBP issued this moment),
proceed as normal.
>DE catch up to this COND_EXEC, but this time MCBP issued,
thus DE treats all following packages as NOP. The following
VM switch packages now looks just as NOP to DE, so DE
dosen't do VM flush at all.
>Now CE proceeds to the first IBc, and triggers VM fault,
because DE didn't do VM flush for this DMAframe.
3) change estimated alloc size for gfx9.
with new DMAframe scheme, we need modify emit_frame_size
for gfx9
4) No need to insert 128 nops after gfx8 vm flush anymore
because there was double SWITCH_BUFFER append to vm flush,
and for gfx7 we already use double SWITCH_BUFFER following
after vm_flush so no change needed for it.
5) Change emit_frame_size for gfx8
v2: squash in BUG removal from Monk
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
those MC_VM registers won't be programed by VBIOS in VF
so driver is responsible to programe them.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ring_write_multiple should use buf_mask instead of ptr_mask
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for SRIOV we cannot use access register when in IRQ routine
with regular KIQ method
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
no CG for SRIOV on SOC15
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
no hw_fini for SRIOV, otherwise other VF will be affected
no CG for SRIOV
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
must set minor_update.enable before write smaller value
to wptr/doorbell, so for sriov we need set that register
bit in hw_init period.
this could fix the SDMA ring test fail after guest reboot
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ring->buf_mask need be set prior to ring_clear_ring invoke
and fix ring_clear_ring as well which should use buf_mask
instead of ptr_mask
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this must be invoked during early init
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apply the new IB during IB emit for SRIOV with MCBP
v2: agd: use define instead of magic number
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set bit 21 of IB.control filed to actually enable
MCBP for SRIOV
v2:
add flag for preemption enable bit for soc15 and use
this flag instead of hardcode.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when MCBP enabled for gfx8, the cond_exec must also
be implemented, otherwise there will be odds to meet
cross engine (ce and me) deadlock when world switch
happens.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1,the check is only appliable for SRIOV GFX engine.
2,use chunk_ib instead of ib.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Ken Wang <Qingqing.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
to prevent submit two or more IBs with PREEMPT flags.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
should use chunk_ib instead of ib, otherwise the logic
is incorrect.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Ken Wang <Qingqing.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also, add the fence of the clear operations to the BO to ensure that
the underlying memory can only be re-used after all PTEs pointing to
it have been cleared.
This avoids the following sequence of events that could be triggered
by user space:
1. Submit a CS that accesses some BO _without_ adding that BO to the
buffer list.
2. Free that BO.
3. Some other task re-uses the memory underlying the BO.
4. The CS is submitted to the hardware and accesses memory that is
now already in use by somebody else.
By clearing the page tables immediately in step 2, a GPU VM fault will
be triggered in step 4 instead of wild memory accesses.
v2: use amdgpu_bo_fence directly
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate and free page directories on demand.
V2:
a. clear entries allocation
b. fix entries index calculation
c. need alloc sub level even parent bo was allocated
Signed-off-by: Christian König <christian.koenig@amd.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> (v2)
Acked-by: Alex Deucher <alexander.deucher@amd.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not the best solution, but good enough for now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update all levels of the page directory.
V2:
a. sub level pdes always are written to incorrect place.
b. sub levels need to update regardless of parent updates.
Signed-off-by: Christian König <christian.koenig@amd.com> (V1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (V1)
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> (V2)
Acked-by: Alex Deucher <alexander.deucher@amd.com> (V2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move all levels to the end after command submission.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All page directory levels should be in place after this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows us to get the size for all levels as well.
v2: agd: fix warning
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change, but the base for multi level page tables.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Needs to be filled with handling.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way we save passing it through the different functions.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Decribes better what this is used for.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ring structure already has what we need.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoids passing around additional parameters during setup.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Everything we need is in the ring structure. No need to
pass all the bits explicitly.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To better match where they are used. Called from sw_init
and sw_fini.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For MM sriov, need use MMSCH to init engine and the init procedures
are all saved in mm table.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For MM SRIOV, need to prepare MM table send send it to MMSCH to
initial UVD & VCE engine. Create new header file for the structures.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order to not break SRIOV gfx development, will revert
this patch after vce proved working.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate MM table for sriov device.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new structure for MM table for multi media scheduler of sriov.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
disable uvd for sriov temporarily.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCE SRIOV need use doorbell and only works on VCN0 ring now
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV, MM don't need to care about PG & CG, skip it.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable virtual displays if the user has enabled them via the
kernel command line. Useful in virtual or headless environments.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VF need virtual dce, enable it if device is vf.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If gpu device is vf, set virt ops so that guest can talk with GPU
hypervisor.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement mailbox protocol for AI so that guest vf can communicate
with GPU hypervisor.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If enable DPM for VF, always get lot of warn_slow_patch_null in
dmesg and vf doesn't support DPM.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
two reasons:
1. there is a spinlock around;
2. vm register is pf/vf copy, vf can access via mmio safely.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework sdma init to support SR-IOV.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
one issue unresolved for RLC:
rlc will go wrong completely if there is a soft_reset
before RLC ucode loading.
to workaround above issue, we can totally ignore RLC
in guest driver side due to there was already full
initialization on RLC side by GIM
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Insert ce meta prior to cntx_cntl and de follow it.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
it is needed for virtualization
v2: squash in wptr value fix
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Init kiq via cpu mmio and init kcq through kiq.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fullfill KIQ irq funcs to support kiq interrupt.
v2: squash in adding interrupt src
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fullfill kiq funcs to support kiq ring.
v2: squash in 64bit ptr fix
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate KIQ ring in sw_init for gfx9.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Read vega10 hw register to detect if sriov is enabled, and call
it before IP blocks setting.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Required for SR-IOV.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: add AMD_EXP_HW_SUPPORT for now
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add soc15 support and enable all the IPs for vega10.
v2: squash in xclk fix
v3: disable HDP MGCG
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds power management support for vega10.
v2: squash in fan control and led config fixes from Rex
v3: squash in dead code removal and socvid fixes from Rex
v4: squash in dpm force level fix from Rex
v5: squash in latest headless, gpu load fixes from Rex
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP is responsible for firmware loading on SOC-15 asics.
v2: fix memory leak (Ken)
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for gfx v9.0.
v2: update golden settings from Ken
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: fix Makefile
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SOC-15 parts, the GMC (Graphics Memory Controller) consists
of two hubs: GFX (graphics and compute) and MM (sdma, uvd, vce).
v2: drop sdma from Makefile, fix duplicate return statement.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This handles nbio 6.1 specific implementations which
are used by various other IPs.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flags need to be 0 to be considered invalid.
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Defines the header info for the psp firmware.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Handle ucode differences in vega10.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
NGG (Next Generation Graphics) is a new feature in GFX9.0. This
adds the relevant parameters.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to grab IVs without spamming the log.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reflect the new format on soc-15 asics.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces a new flag named "amdgpu_firmware_load_type" to
handle different firmware loading method. Since Vega10, there are
three ways to load firmware. It would be better to use a flag and a
fw_load_type kernel parameter to configure it.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: ken <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are used by various IP modules.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds basic support for asics that use atomfirmware.h
to define their vbios tables.
v2: rebase
v3: squash in num scratch reg fix
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There will be a slightly different version for atomfirmware.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Supposedly atomfirmware rom header is 3.3 atombios is 1.1.
v2: rebased on newer kernel
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We will add the fence to freed buffer objects in a later commit, to ensure
that the underlying memory can only be re-used after all references in
page tables have been cleared.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ring structure already has what we need.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoids passing around additional parameters during setup.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Everything we need is in the ring structure. No need to
pass all the bits explicitly.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to loop through the compute queues twice.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If KIQ isn't working, the compute rings won't work either.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To better match where they are used. Called from sw_init
and sw_fini.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
load mc ucode in driver if VBIOS not loaded
a full version of MC ucode,
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: jimqu <Jim.Qu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
it could come from branch merge.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the ixcurrent_pg_status addr is different between APU and DGPU.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Forces VCE/UVD off during late init to ensure they're powered off
correctly during boot.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The outer loop is redundant and can be removed as it is doing nothing
useful. Also remove some commented out code that is not being used.
Detected by CoverityScan, CID#1402073
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the before mapping is 1 page size, so its start and last will be same.
Thus below condition will become false, then to free the before mapping.
> if (before->it.start != before->it.last)
But in this case, we need the before mapping of 1 page size.
So does after mapping.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new operation to replace mappings in a VM with a new one.
v2: Fix Jerry's comment, separate out clear operation.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A new VM operation to remove all mappings in a range.
v2: limit unmapped area as noted by Jerry
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This makes it easier to implement a replace operation.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PRT support is completely implemented now and we left it
turned on accidentially in the error path.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX_MGLS was added twice.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found with scripts/coccinelle/misc/boolconv.cocci.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This helps de-duplicate a long expression and removes overly long lines.
v2: Rename macro and undef it
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fence data is easier to read and allows us to correlate to identify
corresponding dma_fence ftrace events.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove pointers which provide redundant information which is already
easier to deduce from other fields.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pointers get reallocated and they are hard to read for humans. Use ids
instead.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Consistent formatting makes it easier to read the logs and apply simple
awk oneliners.
I missed some of these on my last patch.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We originally limited the IH to 4k on tonga since it
uses bus addresses directly rather than GPU MC addresses,
so it needs contigous physical memory. This brings it
inline with other asics.
Signed-off-by: Roger.He <Hongbo.He@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SI cards don't expose GDS as a separate pool. The CP manages
GDS and the UMDs use special CP packets to allocate GDS memory.
v2: drop extra whitespace change
bug: https://bugzilla.kernel.org/show_bug.cgi?id=194867
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leftover from gfx7 code. gfx6 never sets up the gds buffers
in the first place.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix logic error in hw_fini and
set_clockgating_state functions.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
start vce first then enable vce dpm.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And initialize them
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Newer asics use different registers so abstract it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: agd: integrate Christian's comments.
v3: print error message if call fails
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This lets each asic set whichever flags it supports.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set asic specific gart pte flags in the gmc IP module for
each asic.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will be used for newer asics.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Necessary for new asics.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The contextID field (formerly known as src_data) of the IH
vector stores client specific information about an interrupt.
It was expanded from 32 bits to 128 on newer asics. Expand the
src_id field to handle this.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Newer asics have a two levels of irq ids now:
client id - the IP
src id - the interrupt src within the IP
v2: integrated Christian's comments.
v3: fix rebase fail in SI and CIK
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Newer asics need 64 bit doorbells.
v2: fix comment (Nils)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Newer asics need 64 bit writeback slots.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Newer asics need 64 bit wptrs. If the wptr is now
smaller than the rptr that doesn't indicate a wrap-around
anymore.
v2: integrate Christian's comments.
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: agd: move apertures to mc structure
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Again no apparent explanation for the split except hysterical raisins.
Merging them also makes it a bit more obviuos what's going on wrt the
runtime pm refdancing.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This information is intended to provide the required data to associate
amdgpu tracepoints with their corresponding dma_fence_* events.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Most of the traces have uniform format except for two of them. Having
all the traces match makes it simple to run awk on the ftrace output.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because different HWs have different definition for CE & DE meta
data, follow mqd design to move the structures to vi_structs.h.
And change the prefix from amdgpu to vi as the structures is only
for VI family.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used in a while.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We completely bypass the HDP now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use a more common logging style.
Miscellanea:
o Coalesce formats and realign arguments
o Neaten a few macros now using pr_<level>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using 'printk("\n")' is not preferred anymore and
using printk to continue logging messages now produces
multiple line logging output unless the continuations
use KERN_CONT.
Convert these uses to appropriately use pr_cont or a
single printk where possible.
Miscellanea:
o Use a temporary const char * instead of multiple printks
o Remove trailing space from logging by using a leading space instead
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There still seem to be some blocks that make accesses
in the lower part of the address space. This works around
this.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Program the VCE BAR and offsets properly. The current code
was carried over from a limitation from older VCE versions.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.orgamd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In some cases, manually insmod/rmmod amdgpu is necessary. When
unloading amdgpu, the KIQ IRQ enable/disable function will case
system hang. The root cause is, in the sequence of function
amdgpu_fini, the sw_fini of IP block AMD_IP_BLOCK_TYPE_GFX will be
invoked earlier than that of AMD_IP_BLOCK_TYPE_IH. So continue to use
the variable freed by AMD_IP_BLOCK_TYPE_GFX will cause system hang.
Signed-off-by: Trigger Huang <trigger.huang@amd.com>
Reviewed-by: Xiangliang Yu < Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: move the config struct to drm_amdgpu_info_device
v3: move the config feature to amdgpu_gca_config
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to free mqd backup when destroying ring.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When send messages to hypervior, the messages format should be is
idh_request, not idh_event.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vi_mqd is only used by VI family but mqd_ptr and mqd_backup is
common for all ASIC, so change the pointer to void.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2:
use in_rest to fix compute ring test failure issue
which occured after FLR/gpu_reset.
we need backup a clean status of MQD which was created in drv load
stage, and use it in resume stage, otherwise KCQ and KIQ all may
faild in ring/ib test.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In resume routine, we need clr RB prior to the
ring test of engine, otherwise some engine hang
duplicated during GPU reset.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
we can use it clear ring buffer instead of fullfill
0, which is not correct for engine
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this is required for restoring the mqds after GPU reset.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use it to seperate driver load and gpu reset/resume
because gfx IP need different approach for different
hw_init trigger source
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this flag will get cleared by request gpu access
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
no need to use a delay work since we don't know how
much time hypervisor takes on FLR, so just polling
and waiting in a work.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use no kiq version reg access due to:
1) better performance
2) INTR context consideration (some routine in mailbox is in
INTR context e.g.xgpu_vi_mailbox_rcv_irq)
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
some registers are PF & VF copy, and we can safely use
mmio method to access them.
and sometime we are forbid to use kiq to access registers
for example in INTR context.
we need a MACRO that always disable KIQ for regs accessing
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change-Id: Ica8f86577a50d817119de4b4fb95068dc72652a9
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By using ttm_bo_init_reserved instead of the manual initialization of
the reservation object, the reservation lock will be properly unlocked
and destroyed when the TTM BO initialization fails.
Actual deadlocks caused by the missing unlock should have been fixed
by "drm/ttm: never add BO that failed to validate to the LRU list",
superseding the flawed fix in commit 38fc4856ad ("drm/amdgpu: fix
a potential deadlock in amdgpu_bo_create_restricted()").
This change fixes remaining recursive locking errors that can be seen
with lock debugging enabled, and avoids the error of freeing a locked
mutex.
As an additional minor bonus, buffers created with resv == NULL and
the AMDGPU_GEM_CREATE_VRAM_CLEARED flag are now only added to the
global LRU list after the fill commands have been issued.
v2: use amdgpu_bo_unreserve instead of ttm_bo_unreserve
Fixes: 12a852219583 ("drm/amdgpu: improve AMDGPU_GEM_CREATE_VRAM_CLEARED handling (v2)")
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 38fc4856ad, which
introduces a use-after-free.
The underlying bug should be properly fixed with "drm/ttm: never add BO
that failed to validate to the LRU list".
Cc: zhoucm1 <david1.zhou@amd.com>
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This includes shader/memory clocks, temperature, GPU load, etc.
v2: - add sub-queries for AMDPGU_INFO_GPU_SENSOR_*
- do not break the ABI
v3: - return -ENOENT when amdgpu_dpm == 0
- expose more sensor queries
v4: - s/GPU_POWER/GPU_AVG_POWER/
- improve VDDNB/VDDGFX query description
- fix amdgpu_dpm check
v5: - agd: fix warning
v6: - agd: bump version
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
read_sensor() has been recently implemented for dpm based boards
which means amdgpu_sensors can now be exposed.
v2: - make sure read_sensor is not NULL on dpm chips
- keep sanity check for powerplay chips
v3: - make sure amdgpu_dpm != 0
Cc: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the GPU temperature, the shader clock and eventually the
memory clock (as well as the GPU load on CI). The main goal is
to expose this info to the userspace like Radeon.
v2: - add AMDGPU_PP_SENSOR_GPU_LOAD on CI
- update the commit description
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: new approach fixing this by registering a fence callback for
all users of the VM on teardown
v3: agd: rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't assume kmalloc will always succeed.
v2: agd: rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When two VMs stop using PRT support at the same time we might
not disable it in the right order otherwise.
v2: agd: rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those should be 64bit, even on a 32bit system.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This update allows sensors to return more than 1 value and
indicates to the caller how many bytes are written.
The debugfs interface has been updated to handle reading all
of the values. Simply seek to the enum value (multiplied
by 4) and then read as many bytes as the sensor provides.
(v2): Don't set size to 4 before reading GPU_POWER
(v3): agd: rebase
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable/disable the handling globally for now and
print a warning when we enable it for the first time.
v2: set correct register
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable/disable the handling globally for now and
print a warning when we enable it for the first time.
v2: set correct register
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable/disable the handling globally for now and
print a warning when we enable it for the first time.
v2: write to the correct register, adjust bits to that hw generation
v3: fix compilation, add the missing register bit definitions
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Till GFX8 we can only enable PRT support globally, but with the next hardware
generation we can do this on a per page basis.
Keep the interface consistent by adding PRT mappings and enable
support globally on current hardware when the first mapping is made.
v2: disable PRT support delayed and on all error paths
v3: PRT and other permissions are mutal exclusive,
PRT mappings don't need a BO.
v4: update PRT mappings durign CS as well, make va_flags 64bit
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Future hardware generations can handle PRT flags on a per page basis,
but current hardware can only turn it on globally.
Add the basic handling for both, a global callback to enable/disable
triggered by setting a per mapping flag.
v2: agd: rebase fixes
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For PRT support we need mappings which aren't backed by any memory.
v2: fix parameter checking
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
no suspend invoked so after VF FLR by host, we just
call hw_init to reinitialize IPs.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The additional output are:
vddc power in Watt;
vddci power in Watt;
max gpu power in Watt;
average gpu power in Watt.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As well as fix print format for uint32_t type.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the sysfs entries pp_gfx_power_profile and
pp_compute_power_profile which give user a way to set
power profile through parameters minimum sclk, minimum mclk,
activity threshold, up hysteresis and down hysteresis only
when the entry power_dpm_force_performance_level is in
default value "auto". It is read and write. Example:
echo 500 800 20 0 5 > /sys/class/drm/card0/device/pp_*_power_profile
cat /sys/class/drm/card0/device/pp_*_power_profile
500 800 20 0 5
Note: first parameter is sclk in MHz, second is mclk in MHz,
third is activity threshold in percentage, fourth is up hysteresis
in ms and fifth is down hysteresis in ms.
echo set > /sys/class/drm/card0/device/pp_*_power_profile
To set power profile state if it exists.
echo reset > /sys/class/drm/card0/device/pp_*_power_profile
To restore default state and clear previous setting.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this lock is used for sriov_gpu_reset, only get this mutex
can run into sriov_gpu_reset.
we have couple source triggers gpu_reset for SRIOV:
1) submit timedout and trigger reset voluntarily
2) invalid instruction detected by ENGINE and trigger reset voluntarily
2) hypervisor found world switch hang and trigger flr and notify guest to
do reset.
all need take care and we need a mutex to protect the consistency of
reset routine.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
implement SRIOV gpu_reset for future use.
it wil be called from:
1) job timeout
2) privl access or instruction error interrupt
3) hypervisor detect VF hang
v2: agd: rebase on upstream
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sw part only invoked once during sw_init.
hw part invoked during first drv load and resume later.
that way we cannot alloc mqd in hw/resume, we only keep
mqd allocted in sw_init routine.
and hw_init routine only kmap and set it.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We ultimately want to re-use this for bare metal,
so no need to have vf checks in the KIQ code itself
since kiq itself is currently only used in VF cases.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this is for SRIOV fix:
mqd soft init/fini will be invoked by sw_init to
allocate BO for compute MQD resource, instead of
original scheme that hw_init allocates MQD.
because if hw_init allocates MQD, then resume will
allocate MQD, and that lead to memory leak after
driver recovered from hang.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
introduce a new mqd member in ring is for later usage.
we need keep a clean version of MQD for the purpose
of recovering compute rings from hang.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CG & PG function changes engine clock/gating, which is
not appropriate for VF device, because one vf doesn't know
the whole picture of engine's overall workload.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CPU is not efficient to clean framebuffer especially under
virtualization, then loading driver takes long time which causes
timeout of mailbox handshake.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ib_pool init should prior to fbdev_init, otherwise
there will be error from amdgpu_sa_bo_new
(amdgpu_sa.c:323)
fbdev_init will call ttm_validate which further call
amdgpu_sa_bo_new.
v2:
move fbdev_init behind ib test.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VF uses KIQ to access registers. When VM fault occurs, the driver
can't get back the fence of KIQ submission and runs into CPU soft
lockup.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When multiple VFs try to enter exclusive mode at the same time, the
looping mechansim doesn't help to ensure each can get it because it
only loops active VFs, then the last one has to wait for a long
interval.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1,like pp_hw_init, we shouldn't report error if PP disabled
2,disable pp_en if sriov
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Surprisingly a lot of legacy drivers roll their own, for
runtime pm and because vmwgfx.
Also make nouveau's set_config static while at it.
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-19-daniel.vetter@ffwll.ch
Again just going through the motions, no functional changes in here.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>t
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-12-daniel.vetter@ffwll.ch
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJY2C9qAAoJEHm+PkMAQRiGaBQIAIGzdlZ6ImiP6zoukrRv7qUr
44ITm0lsBiL85QGedhQQL+Y9UqwUmlqgFqnH0Gr8YHNbLJWXzdjGbl5aVo4KjASq
104NLUDXtPww/xZdH4wJMzhuwucYwZOUyDOjOr0ak3cGxOE2xjNjHMZXxWUf20GO
EpRr6WhV1DUAvAdjdNa9KlcOjMluNpMLLyL1CFLjrkkArrWAyqOURKHAb6ZLghfv
iZV1qJTVPyYGpnlI3kuEgu2GuDjxqpoNLSr3wHyEHm/pBPEl7MX6zPbzcegBV8TY
cRRlXo4notdsuknmSNcj0hHuTQvw1kl7BhieLKVsnCyCIM6jjX4TSQZFutmbzwM=
=5iRl
-----END PGP SIGNATURE-----
Backmerge tag 'v4.11-rc4' into drm-next
Linux 4.11-rc4
The i915 GVT team need the rc4 code to base some more code on.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYzznuAAoJEHm+PkMAQRiGAzMIAJDBo5otTMMLhg8eKj8Cnab4
2NyaoWDN6mtU427rzEKEfZlTtp3gIBVdFex5x442weIdw6BgRQW0dvF/uwEn08yI
9Wx7VJmIUyH9M8VmhDtkUTFrhwUGr29qb3JhENMd7tv/CiJaehGRHCT3xqo5BDdu
xiyPcwSkwP/NH24TS91G87gV6r0I0oKLSAxu+KifEFESrb8gaZaduslzpEj3m/Ds
o9EPpfzaiGAdW5EdNfPtviYbBk7ZOXwtxdMV+zlvsLcaqtYnFEsJZd2WyZL0zGML
VXBVxaYtlyTeA7Mt8YYUL+rDHELSOtCeN5zLfxUvYt+Yc0Y6LFBLDOE5h8b3eCw=
=uKUo
-----END PGP SIGNATURE-----
BackMerge tag 'v4.11-rc3' into drm-next
Linux 4.11-rc3 as requested by Daniel
The clearing wb size should be the one that it is assigned.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A few amd fixes.
* 'drm-fixes-4.11' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/amdgpu: Fix debugfs reg read/write address width
drm/amdgpu/si: add dpm quirk for Oland
drm/radeon/si: add dpm quirk for Oland
drm: amd: remove broken include path
drm/amd/powerplay: fix copy error in smu7_clockpoweragting.c
drm/amdgpu: fix parser init error path to avoid crash in parser fini
drm/amd/amdgpu: Disable GFX_PG on Carrizo until compute issues solved
The MMIO space is wider now so we mask the lower 22 bits
instead of 18.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
OLAND 0x1002:0x6604 0x1028:0x066F 0x00 seems to have problems
with higher sclks.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If we don't reset the chunk info in the error path, the subsequent
fini path will double free.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently compute jobs will stall if GFX_PG is enabled. Until this
is resolved we'll disable GFX_PG.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=nMno
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-4.11-rc2' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Intel, amd and mxsfb fixes.
These are the drm fixes I've collected for rc2. Mostly i915 GVT only
fixes, along with a single EDID fix, some mxsfb fixes and a few minor
amd fixes"
* tag 'drm-fixes-for-4.11-rc2' of git://people.freedesktop.org/~airlied/linux: (38 commits)
drm: mxsfb: Implement drm_panel handling
drm: mxsfb_crtc: Fix the framebuffer misplacement
drm: mxsfb: Fix crash when provided invalid DT bindings
drm: mxsfb: fix pixel clock polarity
drm: mxsfb: use bus_format to determine LCD bus width
drm/amdgpu: bump driver version for some new features
drm/amdgpu: validate paramaters in the gem ioctl
drm/amd/amdgpu: fix console deadlock if late init failed
drm/i915/gvt: change some gvt_err to gvt_dbg_cmd
drm/i915/gvt: protect RO and Rsvd bits of virtual vgpu configuration space
drm/i915/gvt: handle workload lifecycle properly
drm/edid: Add EDID_QUIRK_FORCE_8BPC quirk for Rotel RSX-1058
drm/i915/gvt: fix an error for F_RO flag
drm/i915/gvt: use pfn_valid for better checking
drm/i915/gvt: set SFUSE_STRAP properly for vitual monitor detection
drm/i915/gvt: fix an error for one register
drm/i915/gvt: add more registers into handlers list
drm/i915/gvt: have more registers with F_CMD_ACCESS flags set
drm/i915/gvt: add some new MMIOs to cmd_access white list
drm/i915/gvt: fix pcode mailbox write emulation of BDW
...
Fix typos and add the following to the scripts/spelling.txt:
disble||disable
disbled||disabled
I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c
untouched. The macro is not referenced at all, but this commit is
touching only comment blocks just in case.
Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We added new gem ioctl flags and the new fences ioctl, but forgot
to bump the version.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reject it if there are any invalid flags or domains.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
First slice of drm-misc-next for 4.12:
Core/subsystem-wide:
- link status core patch from Manasi, for signalling link train fail
to userspace. I also had the i915 patch in here, but that had a
small buglet in our CI, so reverted.
- more debugfs_remove removal from Noralf, almost there now (Noralf
said he'll try to follow up with the stragglers).
- drm todo moved into kerneldoc, for better visibility (see
Documentation/gpu/todo.rst), lots of starter tasks in there.
- devm_ of helpers + use it in sti (from Ben Gaignard, acked by Rob
Herring)
- extended framebuffer fbdev support (for fbdev flipping), and vblank
wait ioctl fbdev support (Maxime Ripard)
- misc small things all over, as usual
- add vblank callbacks to drm_crtc_funcs, plus make lots of good use
of this to simplify drivers (Shawn Guo)
- new atomic iterator macros to unconfuse old vs. new state
Small drivers:
- vc4 improvements from Eric
- vc4 kerneldocs (Eric)!
- tons of improvements for dw-mipi-dsi in rockchip from John Keeping
and Chris Zhong.
- MAINTAINERS entries for drivers managed in drm-misc. It's not yet
official, still an experiment, but definitely not complete fail and
better to avoid confusion. We kinda screwed that up with drm-misc a
bit when we started committers last year.
- qxl atomic conversion (Gabriel Krisman)
- bunch of virtual driver polish (qxl, virgl, ...)
- misc tiny patches all over
This is the first time we've done the same merge-window blackout for
drm-misc as we've done for drm-intel for ages, hence why we have a
_lot_ of stuff queued already. But it's still only half of drm-intel
(room to grow!), and the drivers in drm-misc experiment seems to work
at least insofar as that you also get lots of driver updates here
alredy.
* tag 'drm-misc-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-misc: (141 commits)
drm/vc4: Fix OOPSes from trying to cache a partially constructed BO.
drm/vc4: Fulfill user BO creation requests from the kernel BO cache.
Revert "drm/i915: Implement Link Rate fallback on Link training failure"
drm/fb-helper: implement ioctl FBIO_WAITFORVSYNC
drm: Update drm_fbdev_cma_init documentation
drm/rockchip/dsi: add dw-mipi power domain support
drm/rockchip/dsi: fix insufficient bandwidth of some panel
dt-bindings: add power domain node for dw-mipi-rockchip
drm/rockchip/dsi: remove mode_valid function
drm/rockchip/dsi: dw-mipi: correct the coding style
drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi
dt-bindings: add rk3399 support for dw-mipi-rockchip
drm/rockchip: dw-mipi-dsi: add reset control
drm/rockchip: dw-mipi-dsi: support non-burst modes
drm/rockchip: dw-mipi-dsi: defer probe if panel is not loaded
drm/rockchip: vop: test for P{H,V}SYNC
drm/rockchip: dw-mipi-dsi: use positive check for N{H, V}SYNC
drm/rockchip: dw-mipi-dsi: use specific poll helper
drm/rockchip: dw-mipi-dsi: improve PLL configuration
drm/rockchip: dw-mipi-dsi: properly configure PHY timing
...
Pull IDR rewrite from Matthew Wilcox:
"The most significant part of the following is the patch to rewrite the
IDR & IDA to be clients of the radix tree. But there's much more,
including an enhancement of the IDA to be significantly more space
efficient, an IDR & IDA test suite, some improvements to the IDR API
(and driver changes to take advantage of those improvements), several
improvements to the radix tree test suite and RCU annotations.
The IDR & IDA rewrite had a good spin in linux-next and Andrew's tree
for most of the last cycle. Coupled with the IDR test suite, I feel
pretty confident that any remaining bugs are quite hard to hit. 0-day
did a great job of watching my git tree and pointing out problems; as
it hit them, I added new test-cases to be sure not to be caught the
same way twice"
Willy goes on to expand a bit on the IDR rewrite rationale:
"The radix tree and the IDR use very similar data structures.
Merging the two codebases lets us share the memory allocation pools,
and results in a net deletion of 500 lines of code. It also opens up
the possibility of exposing more of the features of the radix tree to
users of the IDR (and I have some interesting patches along those
lines waiting for 4.12)
It also shrinks the size of the 'struct idr' from 40 bytes to 24 which
will shrink a fair few data structures that embed an IDR"
* 'idr-4.11' of git://git.infradead.org/users/willy/linux-dax: (32 commits)
radix tree test suite: Add config option for map shift
idr: Add missing __rcu annotations
radix-tree: Fix __rcu annotations
radix-tree: Add rcu_dereference and rcu_assign_pointer calls
radix tree test suite: Run iteration tests for longer
radix tree test suite: Fix split/join memory leaks
radix tree test suite: Fix leaks in regression2.c
radix tree test suite: Fix leaky tests
radix tree test suite: Enable address sanitizer
radix_tree_iter_resume: Fix out of bounds error
radix-tree: Store a pointer to the root in each node
radix-tree: Chain preallocated nodes through ->parent
radix tree test suite: Dial down verbosity with -v
radix tree test suite: Introduce kmalloc_verbose
idr: Return the deleted entry from idr_remove
radix tree test suite: Build separate binaries for some tests
ida: Use exceptional entries for small IDAs
ida: Move ida_bitmap to a percpu variable
Reimplement IDR and IDA using the radix tree
radix-tree: Add radix_tree_iter_delete
...
Backmerge the main pull request to sync up with all the newly landed
drivers. Otherwise we'll have chaos even before 4.12 started in
earnest.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Some ttm/amd fixes.
* 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/powerplay: fix PSI feature on Polars12.
drm/amdgpu: refuse to reserve io mem for split VRAM buffers
drm/ttm: fix use-after-free races in vm fault handling
drm/amd/amdgpu: post card if there is real hw resetting performed
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYoM2fAAoJEHm+PkMAQRiGr9MH/izEAMri7rJ0QMc3ejt+WmD0
8pkZw3+MVn71z6cIEgpzk4QkEWJd5rfhkETCeCp7qQ9V6cDW1FDE9+0OmPjiphDt
nnzKs7t7skEBwH5Mq5xygmIfkv+Z0QGHZ20gfQWY3F56Uxo+ARF88OBHBLKhqx3v
98C7YbMFLKBslKClA78NUEIdx0UfBaRqerlERx0Lfl9aoOrbBS6WI3iuREiylpih
9o7HTrwaGKkU4Kd6NdgJP2EyWPsd1LGalxBBjeDSpm5uokX6ALTdNXDZqcQscHjE
RmTqJTGRdhSThXOpNnvUJvk9L442yuNRrVme/IqLpxMdHPyjaXR3FGSIDb2SfjY=
=VMy8
-----END PGP SIGNATURE-----
Merge tag 'v4.10-rc8' into drm-next
Linux 4.10-rc8
Backmerge Linus rc8 to fix some conflicts, but also
to avoid pulling it in via a fixes pull from someone.
When the fast blit path fails while attempting to move a buffer from RAM
to VRAM, we fall back to a CPU-based memcpy that cannot handle split VRAM
buffers. Instead of crashing, simply fail the buffer move.
Ideally, we would teach TTM about split buffers so that the fallback still
works in this case, but that is quite involved. So for now, apply the
simplest possible fix.
Fixes: 40361bb1704b ("drm/amdgpu: add VRAM manager v2")
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check whether we need to post rather than whether the asic is
posted. There are some cases (e.g., GPU reset or resume from
hibernate) where we need to force post even if the asic has
been posted.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gcc-4.8 warns about '{0}' being used an an initializer for nested structures:
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c: In function ‘gfx_v8_0_ring_emit_ce_meta_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:7263:2: warning: missing braces around initializer [-Wmissing-braces]
} ce_payload = {0};
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c: In function ‘gfx_v8_0_ring_emit_de_meta_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:7290:2: warning: missing braces around initializer [-Wmissing-braces]
} de_payload = {0};
Using an empty {} initializer however has the same effect and works on all versions.
Fixes: acad2b2a7b ("drm/amdgpu:implement CE/DE meta-init routines")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Break out of outer loop properly.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is a relatively common idiom (8 instances) to first look up an IDR
entry, and then remove it from the tree if it is found, possibly doing
further operations upon the entry afterwards. If we change idr_remove()
to return the removed object, all of these users can save themselves a
walk of the IDR tree.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Initialized PIPE_ORDER_TS0/1/2/3 field of SPI_ARB_PRIORITY register to 2.
This set the pipe priority order to:
02 - HP3D, CS_H, GFX, CS_M, CS_L
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a bit needed during initialization into the driver, where it is supposed
to be. Currently, this is happening in the VCE firmware, and although
functional, this is the correct place to perform this initialization.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alan Harrison <Alan.Harrison@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This removes code duplication.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add cases for asics with 3 and 5 crtcs. Fixes an artificial
limitation on asics with 3 or 5 crtcs.
Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=99744
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Some additional fixes for 4.11. Delayed a bit due to Chinese New Year. Highlights:
- Powerplay fixes
- VCE and UVD powergating fixes
- Clean up amdgpu SI gfx code to match CI and VI
- Misc bug fixes
* 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux: (30 commits)
drm/amdgpu: report the number of bytes moved at buffer creation
drm/amdgpu: fix a potential deadlock in amdgpu_bo_create_restricted()
drm/amdgpu: add support for new smc firmware on polaris
drm/amd/powerplay: refine code to avoid potential bug that the memory not cleared.
drm/amdgpu: shut up #warning for compile testing
drm/amdgpu/virt: fix double kfree on bo_va
drm/radeon: remove some dead code
drm/radeon: avoid kernel segfault in vce when gpu fails to resume
drm/amd/powerplay: set fan speed to max in profile peak mode only.
drm/amd/gfx6: update gb_addr_config
drm/amdgpu: update HAINAN_GB_ADDR_CONFIG_GOLDEN
drm/amdgpu: update VERDE_GB_ADDR_CONFIG_GOLDEN
drm/amdgpu: refine si_read_register
drm/amdgpu/gfx6: clean up spi configuration
drm/amdgpu/gfx6: clean up cu configuration
drm/amdgpu/gfx6: clean up rb configuration
drm/amdgpu: refine vce3.0 code and related powerplay pg code.
drm/amdgpu: move subfunctions to the front of vce_v2_0.c.
drm/amdgpu: enable vce pg feature on Kv.
drm/amdgpu: refine code for VCE2.0 and related dpm code.
...
Like ttm_bo_validate(), ttm_bo_init() might need to move BO and
the number of bytes moved by TTM should be reported. This can help
the throttle buffer migration mechanism to make a better decision.
v2: fix computation
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When ttm_bo_init() fails, the reservation mutex should be unlocked.
In debug build, the kernel reported "possible recursive locking
detected" in this codepath. For debugging purposes, I also added
a "WARN_ON(ww_mutex_is_locked())" when ttm_bo_init() fails and the
mutex was locked as expected.
This should fix (random) GPU hangs. The easy way to reproduce the
issue is to change the "Super Sampling" option from 1.0 to 2.0 in
Hitman. It will create a huge buffer, evict a bunch of buffers
(around ~5k) and deadlock.
This regression has been introduced pretty recently.
v2: only release the mutex if resv is NULL
Fixes: 12a852219583 ("drm/amdgpu: improve AMDGPU_GEM_CREATE_VRAM_CLEARED handling (v2)")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some polaris variants require new smc firmware.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
My randconfig tests on linux-next showed a newly introduced warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c: In function 'amdgpu_bo_create_restricted':
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:377:2: error: #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance thanks to write-combining [-Werror=cpp]
Generally speaking, warnings about bad kernel configuration are not particularly
helpful. We could enforce the selection of X86_PAT through Kconfig, so the driver
cannot even be used unless it is enabled, or we could just rely on the runtime
warning that is also there.
In this version, I'm making the warning conditional on CONFIG_COMPILE_TEST, which
shuts it up for me, but not people that may actually want to run the kernel
as a compromize.
Fixes: a2e2f29970 ("drm/amdgpu: Bring bo creation in line with radeon driver (v2)")
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
bo_va is being kfree'd twice, once in the call to amdgpu_vm_bo_rmv
and then a short while later. Fix this double free by removing
the 2nd kfree.
Detected by CoverityScan, CID#1399524 ("Double Free")
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. not start vce3.0 when hw_init
2. stop vce3.0 when vce idle.
3. pg mask used to ctrl power down/up vce.
4. change cg pg sequence in powerplay.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: clean up vce cg function.
use sw cg when vce stoped.
1. implement vce_stop function.
2. not start vce when hw_init.
3. refine vce cg/pg code.
4. delete bypass mode.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. delete redundant cg pg mask check.
pg mask use to ctrl power on/down uvd.
not start/stop uvd.
cg mask will be check when enable mgcg.
2. no need to start uvd when initializ.
when ring test/ib test/encode, uvd was enabled.
when uvd idle, uvd was stopped.
3. chang cg pg sequence in powerplay.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
need to start smc when dpm disabled.
otherwise, uvd can't get response from smu.
so uvd ring test and ib test will timeout.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. set uvd_status busy before uvd_start.
2. clear uvd_status to 0 after uvd stop.
smu firmware may check uvd_status.
3. wait uvd idle before stop uvd.
4. not start uvd when hw_init.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. no need to set cg as use hw dynamic cg.
2. when uvd idle, stop uvd. encode, start uvd.
3. if pg feature enabled, power on/down uvd by smu.
4. drm/amdgpu: dpm do not set uvd pg status.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Noticed that everyone duplicates the same logic here and we could safe
a few lines per driver. Yay for lots of drivers to make such tiny
refactors worth-while!
v2: Forgot to git add everything :(
v3: Actually remove release_fbi (Sean, Emil, Chris) ...
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207161603.17611-1-daniel.vetter@ffwll.ch
The drm_mm range manager claimed to support top-down insertion, but it
was neither searching for the top-most hole that could fit the
allocation request nor fitting the request to the hole correctly.
In order to search the range efficiently, we create a secondary index
for the holes using either their size or their address. This index
allows us to find the smallest hole or the hole at the bottom or top of
the range efficiently, whilst keeping the hole stack to rapidly service
evictions.
v2: Search for holes both high and low. Rename flags to mode.
v3: Discover rb_entry_safe() and use it!
v4: Kerneldoc for enum drm_mm_insert_mode.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> # vmwgfx
Reviewed-by: Lucas Stach <l.stach@pengutronix.de> #etnaviv
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202210438.28702-1-chris@chris-wilson.co.uk
We don't add any fences do the buffer, but just use it's address.
Additional to that we don't need a duplicates list here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Somebody could try to free the bo_va between mapping and updating it.
v2: fix typos in comment
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of receiving the num_crts as a parameter, we can read it
directly from the mode_config structure. I audited the drivers that
invoke this helper and I believe all of them initialize the mode_config
struct accordingly, prior to calling the fb_helper.
I used the following coccinelle hack to make this transformation, except
for the function headers and comment updates. The first and second
rules are split because I couldn't find a way to remove the unused
temporary variables at the same time I removed the parameter.
// <smpl>
@r@
expression A,B,D,E;
identifier C;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)
@@
expression A,B,C,D,E;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)
@@
identifier r.C;
type T;
expression V;
@@
- T C;
<...
when != C
- C = V;
...>
// </smpl>
Changes since v1:
- Rebased on top of the tip of drm-misc-next.
- Remove mention to sti since a proper fix got merged.
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk
This is the main feature pull for radeon and amdgpu for 4.11. Highlights:
- Power and clockgating improvements
- Preliminary SR-IOV support
- ttm buffer priority support
- ttm eviction fixes
- Removal of the ttm lru callbacks
- Remove SI DPM quirks due to MC firmware issues
- Handle VFCT with multiple vbioses
- Powerplay improvements
- Lots of driver cleanups
* 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux: (120 commits)
drm/amdgpu: fix amdgpu_bo_va_mapping flags
drm/amdgpu: access stolen VRAM directly on CZ (v2)
drm/amdgpu: access stolen VRAM directly on KV/KB (v2)
drm/amdgpu: fix kernel panic when dpm disabled on Kv.
drm/amdgpu: fix dpm bug on Kv.
drm/amd/powerplay: fix regresstion issue can't set manual dpm mode.
drm/amdgpu: handle vfct with multiple vbios images
drm/radeon: handle vfct with multiple vbios images
drm/amdgpu: move misc si headers into amdgpu
drm/amdgpu: remove unused header si_reg.h
drm/radeon: drop pitcairn dpm quirks
drm/amdgpu: drop pitcairn dpm quirks
drm: radeon: radeon_ttm: Handle return NULL error from ioremap_nocache
drm/amd/amdgpu/amdgpu_ttm: Handle return NULL error from ioremap_nocache
drm/amdgpu: add new virtual display ID
drm/amd/amdgpu: remove the uncessary parameter for ib scheduler
drm/amdgpu: Bring bo creation in line with radeon driver (v2)
drm/amd/powerplay: fix misspelling in header guard
drm/ttm: revert "add optional LRU removal callback v2"
drm/ttm: revert "implement LRU add callbacks v2"
...
Another round of -misc stuff:
- Noralf debugfs cleanup cleanup (not yet everything, some more driver
patches awaiting acks).
- More doc work.
- edid/infoframe fixes from Ville.
- misc 1-patch fixes all over, as usual
Noralf needs this for his tinydrm pull request.
* tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits)
drm/vc4: Remove vc4_debugfs_cleanup()
dma/fence: Export enable-signaling tracepoint for emission by drivers
drm/tilcdc: Remove tilcdc_debugfs_cleanup()
drm/tegra: Remove tegra_debugfs_cleanup()
drm/sti: Remove drm_debugfs_remove_files() calls
drm/radeon: Remove drm_debugfs_remove_files() call
drm/omap: Remove omap_debugfs_cleanup()
drm/hdlcd: Remove hdlcd_debugfs_cleanup()
drm/etnaviv: Remove etnaviv_debugfs_cleanup()
drm/etnaviv: allow build with COMPILE_TEST
drm/amd/amdgpu: Remove drm_debugfs_remove_files() call
drm/prime: Clarify DMA-BUF/GEM Object lifetime
drm/ttm: Make sure BOs being swapped out are cacheable
drm/atomic: Remove drm_atomic_debugfs_cleanup()
drm: drm_minor_register(): Clean up debugfs on failure
drm: debugfs: Remove all files automatically on cleanup
drm/fourcc: add vivante tiled layout format modifiers
drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F
drm/edid: Set AVI infoframe Q even when QS=0
drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range()
...
They are 64bit not 32 for a while now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't need to use the PCI BAR on APUs. This allows us to access
the full VRAM directly without being limited by the BAR size.
v2: squash in 64bit shift fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't need to use the PCI BAR on APUs. This allows us to access
the full VRAM directly without being limited by the BAR size.
v2: squash in 64bit shift fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return early if it's disabled.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. current_ps/request_ps not update.
2. compare crrent_ps and request_ps, if same,
don't re-set power state.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vfct table can contain multiple vbios images if the
platform contains multiple GPUs. Noticed by netkas on
phoronix forums. This patch fixes those platforms.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Move these to the amdgpu directory to match what we
do for other asics.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer necessary with the new 58 mc ucode.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Here, If ioremap_nocache will fail. It will return NULL.
Kernel can run into a NULL-pointer dereference.
This error check will avoid NULL pointer dereference.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the case of pass-through, amdgpu.ko may be included into a image
with the hard code ID therefore loading driver with specified virtual
display ID will lose efficacy when the BDF of GPU modifies.So add the
new ID string "all" for it as same as vf case what does.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Yintian Tao <yttao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the bo creation changes that have been done to the radeon driver in
recent times, e.g. disable GTT WC on 32 bit because it is broken there,
and also disable it generally (and print a warning message) when
CONFIG_X86_PAT is not set.
v2: agd: fix warning in defined(CONFIG_X86) && !defined(CONFIG_X86_PAT)
case
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nils Holland <nholland@tisys.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The additional housekeeping had too much CPU overhead,
let's use the BO priorities instead.
agd: also revert hibmc changes
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Give kernel allocations a higher priority cause it is often
more work to swap them back in.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keeping groups of BOs on the LRU is to time consuming on command submission.
Instead use the newly added BO priority to give a certain eviction order.
v2: agd: trivial warning fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way the driver can specify a priority for a BO which has the effect that
a BO is only evicted when all other BOs with a lower priority are evicted
first.
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger.He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virt, freed mailbox irq should be handled in hw fini, not hw
init. Correct it.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reboot process will call HW fini functions of IP blocks. For virt,
need to send event three before hw fini and send event four after
hw fini.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can determine which device the entry is before connecting
a display.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for non-VM submit which is from kernel side, no need
to switch buffer at all.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SR-IOV requires the preamble.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
no need to set it per ib_schedule(), hw won't override
this polling address.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
to support SRIOV preemption.
v2:
fix emit_frame_size
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To determine whether the context uses GPUVM or not.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
those package need to insert into ring buffer for
SRIOV case. they are used to let CP do preemption.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Write multiple dwords to the ring.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
META-DATA is used in GFX cmd submit, we have two
format suit for META-DATA-init, one is legacy and another
is for chained-ib preempt, which is used in vulkan
UMD.
v2: drop use CP version number to judge if chain-ib
supports or not, we wait for it mature
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix up the powergating logic.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Ack-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The scratch regs are sequential so there's no need to keep
them in an array, we can just return the index of the first
free register + the base register. Also change the array
of bools for keeping track of the free regs to a bitfield.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Nils Wallménius <nils.wallmenius@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make pflip atomic friendly. Split the fuinction into
whatever can fail part and the actual flip submit part.
Call the pre-submit function before atomic states
are swapped so in case of error we can fail the
IOCTL.
v2:
Update due to target_vblank code change.
Fix identetation.
Change return type for amdgpu_crtc_submit_flip to void
v3: agd: fix formatting
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switching to -ENOMEM resolves a hang in case the driver
uses this function in atomic code path.
v2: Update commit message.
v3:
Remove forcing -EINVAL in case of amdgpu_bo_pin fail
since there is no apparent reason for not just passing
through the the return value.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use BUG_ON instead of a if condition followed by BUG.
Generated by: scripts/coccinelle/misc/bugon.cocci
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewd-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
CC: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Difference families may have different numbers of rings. Use
the variable rather than a hardcoded number.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unlock the resv lock only if we were the ones to lock it in the first
place.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ttm_bo_init checks that the reservation object is locked. This is
the caller's responsibility when resv != NULL. Otherwise, the inline
reservation object of the newly allocated buffer is used and must
explicitly be locked.
Uninterruptible w/w locks without an acquire context are always
successful.
v2: use ww_mutex_lock
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current amdgpu reset process only works on bare-metal and for
SRIOV many inside it need re-work to adapt to vf device.
This is a temporary workaround to skip gpu reset.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Virtual display is default setting for virtualization, enable it.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Call VI virtualization functions if device is Vf.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For gpu vf device, first need to request full gpu access before
accessing gpu registers, and release full gpu access after the
access is done.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VI has asic specific virt support, which including mailbox and
golden registers init.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: shaoyunl <Shaoyun.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add high level interfaces that is not relate to specific asic. So
asic files just need to implement the interfaces to support
virtualization.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtualization, it is must for driver to use KIQ to access
registers when it is out of GPU full access mode.
v2: agd: rebase
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new flag to define gpu runtime that is out of full gpu access.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement emit_rreg/wreg function for kiq ring.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During virtual runtime, need to send command to kiq ring to
read/write GPU registers. Add two interface to support the two
actions.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Linu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure the CSA is mapped.
v2: agd: rebase.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for SRIOV usage, CSA is only used per device and each
VM will map on it.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
and implement CSA functions in this file
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Skip amdgpu_gem_va_update_vm otherwise. Also clean up the check for the
non-shadow page tables using the new helper function.
This fixes a crash with the stack trace:
amdgpu_gem_va_update_vm
-> amdgpu_vm_update_page_directory
-> amdgpu_ttm_bind
-> amdgpu_gtt_mgr_alloc
v2: actually check bo->shadow instead of just checking bo twice
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Skip amdgpu_gem_va_update_vm when shadow the page directory is swapped out.
Clean up the check for non-shadow BOs as well using the new helper function.
This fixes a crash with the stack trace:
amdgpu_gem_va_update_vm
-> amdgpu_vm_update_page_directory
-> amdgpu_ttm_bind
-> amdgpu_gtt_mgr_alloc
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This catches evictions of shadow page tables from the GART. Since shadow
page tables are always stored in system memory, amdgpu_bo_move is never
called for them.
This fixes a crash during command submission that occurs when only a shadow
page table and no other BOs were evicted since the last submission.
Fixes: 1baa439fb2 ("drm/amdgpu: allocate shadow for pd/pt bo V2")
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ensure that the driver can listen to evictions even when they don't take the
path through ttm_bo_driver::move.
This is crucial for amdgpu, which relies on an eviction counter to skip
re-binding page tables when possible.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. disable vce cg when vce hw initialize.
2. initizlize vce clock to 10KHz fo dgpu,
so no need to set bypass clock to vce.
Change-Id: I934c2c4820cc95c1bfa2fa41ff0f40a0d3cd1c40
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in profiling mode, powerplay will fix power state
as stable as possible.and disable gfx cg and LBPW feature.
profile_standard: as a prerequisite, ensure power and thermal
sustainable, set clocks ratio as close to the highest clock
ratio as possible.
profile_min_sclk: fix mclk as profile_normal, set lowest sclk
profile_min_mclk: fix sclk as profile_normal, set lowest mclk
profile_peak: set highest sclk and mclk, power and thermal not
sustainable
profile_exit: exit profile mode. enable gfx cg/lbpw feature.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: William Lewis <minutemaidpark@hotmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Call detection function driectly, so remove the interface.
V2: ci and si also need to call the detect function.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the detection forward into vi_set_ip_blocks function, then
add ip blocks virtualization need if device is VF.
V2: add ip blocks according to asic type.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use acronym to rename fields to make easy to spell out.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KIQ is queue-memory based initialization method: setup KIQ queue
firstly, then send command to KIQ to setup other queues, without
accessing registers.
For virtualization, need KIQ to access virtual function registers
when running on guest mode.
V2: use amdgpu_bo_create/free_kernel to allocate BO.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PCI I/O bar can be disabled in VBIOS to save the resource. It is often
disabled in large aperture VBIOS. Don't call it an error.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: add pp_check function to check pp_instance
valid.
1. powerplay export two new interface to amdgpu,
amd_powerplay_create/amd_powerplay_destroy.
2. create pp_instance/smumgr/hwmgr/eventmgr in
early init, destroy them when lata_fini.
3. in sw_init, create and init asic private smumgr
data, and free them when sw_fini.
4. in hw_init, create and init asic private hwmgr
data, and free them when hw_fini.
5. export powerplay state: PP_DPM_DISABLED.
when user disabled powerplay or hwmgr/eventmgr
init failed, powerplay return this state to amdgpu.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In some case, App need to run under max stable clock.
so export profiling mode: GFX CG was disabled.
and user can select the max stable clock of the device.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The powerplay implementation has been the default for a
while now.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
move en/disable GFX CP/SMU_HS PG to
function gfx_v8_0_set_powergating_state
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are several ways to check out a ATOMBIOS. In previous codes, try
a new way to fetch out vbios/rom, until current vbios/rom is started with
0x55aa, then check if this vbios is ATOMBIOS. Now, try a new way to fetch
out vbios until all flags of ATOMBIOS are verified.
Signed-off-by: Ken Xue <Ken.Xue@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This header won't be used at amdgpu, it moved to powerplay.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes firmware request error on polaris protection mode.
Because we need load smc_sk instead of smc under security protection
mode.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a left over from radeon, amdgpu doesn't support any
non-atombios parts and amdgpu_device_init would bail if the
check for atombios failed anyway.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Nils Wallménius <nils.wallmenius@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support wider address spaces, make it 32-bit so we don't have to
revisit this for a while.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change History
--------------
v4: Changes suggested by Emil, Christian
- return -ENODATA for asics with unlimited sessions
v3: changes suggested by Christian
- Add a check for UVD IP block using AMDGPU_HW_IP_UVD
query type.
- Add a check for asic_type to be less than
CHIP_POLARIS10 since starting Polaris, we support
unlimited UVD instances.
- Add kerneldoc style comment for
amdgpu_uvd_used_handles().
v2: as suggested by Christian
- Add a new query AMDGPU_INFO_NUM_HANDLES
- Create a helper function to return the number
of currently used UVD handles.
- Modify the logic to count the number of used
UVD handles since handles can be freed in
non-linear fashion.
v1:
- User might want to query the maximum number of UVD
instances supported by firmware. In addition to that,
if there are multiple applications using UVD handles
at the same time, he might also want to query the
currently used number of handles.
For this we add two variables max_handles and
used_handles inside drm_amdgpu_info_hw_ip. So now
an application (or libdrm) can use AMDGPU_INFO IOCTL
with AMDGPU_INFO_HW_IP_INFO query type to get these
values.
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Where possible replace numeric constants in the table
with their register names.
Compile tested + executed on a Tahiti.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Backmerge Linus master to get the connector locking revert.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: (645 commits)
sysctl: fix proc_doulongvec_ms_jiffies_minmax()
Revert "drm/probe-helpers: Drop locking from poll_enable"
MAINTAINERS: add Dan Streetman to zbud maintainers
MAINTAINERS: add Dan Streetman to zswap maintainers
mm: do not export ioremap_page_range symbol for external module
mn10300: fix build error of missing fpu_save()
romfs: use different way to generate fsid for BLOCK or MTD
frv: add missing atomic64 operations
mm, page_alloc: fix premature OOM when racing with cpuset mems update
mm, page_alloc: move cpuset seqcount checking to slowpath
mm, page_alloc: fix fast-path race with cpuset update or removal
mm, page_alloc: fix check for NULL preferred_zone
kernel/panic.c: add missing \n
fbdev: color map copying bounds checking
frv: add atomic64_add_unless()
mm/mempolicy.c: do not put mempolicy before using its nodemask
radix-tree: fix private list warnings
Documentation/filesystems/proc.txt: add VmPin
mm, memcg: do not retry precharge charges
proc: add a schedule point in proc_pid_readdir()
...
Virtual display doesn't allocate amdgpu_encoder when initializing,
so will get invaild pointer if try to free amdgpu_encoder when
unloading driver.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return success when the ring is properly initialized, otherwise return
failure.
Tonga SRIOV VF doesn't have UVD and VCE engines, the initialization of
these IPs is bypassed. The system crashes if application submit IB to
their rings which are not ready to use. It could be a common issue if
IP having ring buffer is disabled for some reason on specific ASIC, so
it should check the ring being ready to use.
Bug: amdgpu_test crashes system on Tonga VF.
Signed-off-by: Ding Pixel <Pixel.Ding@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
need to clear bit31-29 in GRBM_GFX_INDEX,
then the program can be valid.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the proper bits for clockgating setup.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commits 7c83d7abc9 and
a1f49cc179.
They caused the HW cursor to disappear under various circumstances in
the wild. I wasn't able to reproduce any of them, and I'm not sure
what's going on. But those changes aren't a big deal anyway, so let's
just revert for now.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=191291
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99143
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Special MC ucode is required for these memory configurations.
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Back to regular -misc pulls with reasonable sizes:
- dma_fence error clarification (Chris)
- drm_crtc_from_index helper (Shawn), pile more patches on the m-l to roll
this out to drivers
- mmu-less support for fbdev helpers from Benjamin
- piles of kerneldoc work
- some polish for crc support from Tomeu and Benjamin
- odd misc stuff all over
* tag 'drm-misc-next-2017-01-09' of git://anongit.freedesktop.org/git/drm-misc: (48 commits)
dma-fence: Introduce drm_fence_set_error() helper
dma-fence: Wrap querying the fence->status
dma-fence: Clear fence->status during dma_fence_init()
drm: fix compilations issues introduced by "drm: allow to use mmuless SoC"
drm: Change the return type of the unload hook to void
drm: add more document for drm_crtc_from_index()
drm: remove useless parameters from drm_pick_cmdline_mode function
drm: crc: Call wake_up_interruptible() each time there is a new CRC entry
drm: allow to use mmuless SoC
drm: compile drm_vm.c only when needed
fbmem: add a default get_fb_unmapped_area function
drm: crc: Wait for a frame before returning from open()
drm: Move locking into drm_debugfs_crtc_crc_add
drm/imx: imx-tve: Remove unused variable
Revert "drm: nouveau: fix build when LEDS_CLASS=m"
drm: Add kernel-doc for drm_crtc_commit_get/put
drm/atomic: Fix outdated comment.
drm: reference count event->completion
gpu: drm: mgag200: mgag200_main:- Handle error from pci_iomap
drm: Document deprecated load/unload hook
...
The integer returned by the unload hook is ignored by the drm core, so
let's make it void.
This patch was created using the following Coccinelle semantic script
(except for the declaration and comment in drm_drv.h):
Compile-tested only.
// <smpl>
@ get_name @
struct drm_driver drv;
identifier fn;
@@
drv.unload = fn;
@ replace_type @
identifier get_name.fn;
@@
- int
+ void
fn (...)
{
...
}
@ remove_return_param @
identifier get_name.fn;
@@
void fn (...)
{
<...
if (...)
return
- ...
;
...>
}
@ drop_final_return @
identifier get_name.fn;
@@
void fn (...)
{
...
- return 0;
}
// </smpl>
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Acked-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170106175731.29196-1-krisman@collabora.co.uk
First -misc pull for 4.11:
- drm_mm rework + lots of selftests (Chris Wilson)
- new connector_list locking+iterators
- plenty of kerneldoc updates
- format handling rework from Ville
- atomic helper changes from Maarten for better plane corner-case handling
in drivers, plus the i915 legacy cursor patch that needs this
- bridge cleanup from Laurent
- plus plenty of small stuff all over
- also contains a merge of the 4.10 docs tree so that we could apply the
dma-buf kerneldoc patches
It's a lot more than usual, but due to the merge window blackout it also
covers about 4 weeks, so all in line again on a per-week basis. The more
annoying part with no pull request for 4 weeks is managing cross-tree
work. The -intel pull request I'll follow up with does conflict quite a
bit with -misc here. Longer-term (if drm-misc keeps growing) a
drm-next-queued to accept pull request for the next merge window during
this time might be useful.
I'd also like to backmerge -rc2+this into drm-intel next week, we have
quite a pile of patches waiting for the stuff in here.
* tag 'drm-misc-next-2016-12-30' of git://anongit.freedesktop.org/git/drm-misc: (126 commits)
drm: Add kerneldoc markup for new @scan parameters in drm_mm
drm/mm: Document locking rules
drm: Use drm_mm_insert_node_in_range_generic() for everyone
drm: Apply range restriction after color adjustment when allocation
drm: Wrap drm_mm_node.hole_follows
drm: Apply tight eviction scanning to color_adjust
drm: Simplify drm_mm scan-list manipulation
drm: Optimise power-of-two alignments in drm_mm_scan_add_block()
drm: Compute tight evictions for drm_mm_scan
drm: Fix application of color vs range restriction when scanning drm_mm
drm: Unconditionally do the range check in drm_mm_scan_add_block()
drm: Rename prev_node to hole in drm_mm_scan_add_block()
drm: Fix O= out-of-tree builds for selftests
drm: Extract struct drm_mm_scan from struct drm_mm
drm: Add asserts to catch overflow in drm_mm_init() and drm_mm_init_scan()
drm: Simplify drm_mm_clean()
drm: Detect overflow in drm_mm_reserve_node()
drm: Fix kerneldoc for drm_mm_scan_remove_block()
drm: Promote drm_mm alignment to u64
drm: kselftest for drm_mm and restricted color eviction
...
Fixes for 4.10:
- Polaris 12 support
- Add new amd-gfx mailing list to MAINTAINERS file
- UVD clockgating fix
- SI dpm fixes
* 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: drop verde dpm quirks
drm/radeon: drop verde dpm quirks
drm/radeon: update smc firmware selection for SI
drm/amdgpu: update si kicker smc firmware
drm/amd/powerplay: extend smu's response timeout time.
drm/amdgpu: remove static integer for uvd pp state
drm/amd/amdgpu: add Polaris12 PCI ID
drm/amdgpu/powerplay: add Polaris12 support
drm/amd/amdgpu: add Polaris12 support (v3)
MAINTAINERS: Update mailing list for radeon and amdgpu
Port of radeon change to amdgpu.
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Use the appropriate smc firmware for each chip revision.
Using the wrong one can cause stability issues.
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
At two gpu core condition, static integer will cause that second gpu
core uvd state setting will be directly skipped due to the first one
setting
Signed-off-by: Yintian Tao <yttao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: agd: squash in various fixes
v3: agd: squash in:
drm/amdgpu: remove unnecessary smc sk firmware for polaris12
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Including all drivers. I thought about keeping small compat functions
to avoid having to change all drivers. But I really like the
drm_printer idea, so figured spreading it more widely is a good thing.
v2: Review from Chris:
- Natural argument order and better name for drm_mm_print.
- show_mm() macro in the selftest.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483009764-8281-1-git-send-email-daniel.vetter@ffwll.ch
ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
- fix display regression on DCE6/8
- Powergating fixes for GFX8
- amdgpu SI fixes (golden settings, proper rev id setup, etc.)
* 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (21 commits)
drm/amdgpu: update tile table for oland/hainan
drm/amdgpu: update tile table for verde
drm/amdgpu: update rev id for verde
drm/amdgpu: update golden setting for verde
drm/amdgpu: update rev id for oland
drm/amdgpu: update golden setting for oland
drm/amdgpu: update rev id for hainan
drm/amdgpu: update golden setting for hainan
drm/amdgpu: update rev id for pitcairn
drm/amdgpu: update golden setting for pitcairn
drm/amdgpu: update golden setting/tiling table of tahiti
drm/amdgpu: fix cursor setting of dce6/dce8
drm/amdgpu: refine set clock gating for tonga/polaris
drm/amdgpu: initialize cg flags for tonga/polaris10/polaris11.
drm/amdgpu: add new gfx cg flags.
drm/amdgpu: fix pg can't be disabled by PG mask.
drm/amdgpu: always initialize gfx pg for gfx_v8.0.
drm/amdgpu: enable AMD_PG_SUPPORT_CP in Carrizo/Stoney.
drm/amdgpu: fix init save/restore list in gfx_v8.0
drm/amdgpu: fix enable_cp_power_gating in gfx_v8.0.
...
- Move some Linux-specific functionality to upstream ACPICA and
update the in-kernel users of it accordingly (Lv Zheng).
- Drop a useless warning (triggered by the lack of an optional
object) from the ACPI namespace scanning code (Zhang Rui).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=55TG
-----END PGP SIGNATURE-----
Merge tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"Here are new versions of two ACPICA changes that were deferred
previously due to a problem they had introduced, two cleanups on top
of them and the removal of a useless warning message from the ACPI
core.
Specifics:
- Move some Linux-specific functionality to upstream ACPICA and
update the in-kernel users of it accordingly (Lv Zheng)
- Drop a useless warning (triggered by the lack of an optional
object) from the ACPI namespace scanning code (Zhang Rui)"
* tag 'acpi-extra-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory()
ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users
ACPICA: Tables: Allow FADT to be customized with virtual address
ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel
ACPI: do not warn if _BQC does not exist
* acpica:
ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory()
ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users
ACPICA: Tables: Allow FADT to be customized with virtual address
ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel
* acpi-scan:
ACPI: do not warn if _BQC does not exist
This patch removes the users of the deprectated APIs:
acpi_get_table_with_size()
early_acpi_os_unmap_memory()
The following APIs should be used instead of:
acpi_get_table()
acpi_put_table()
The deprecated APIs are invented to be a replacement of acpi_get_table()
during the early stage so that the early mapped pointer will not be stored
in ACPICA core and thus the late stage acpi_get_table() won't return a
wrong pointer. The mapping size is returned just because it is required by
early_acpi_os_unmap_memory() to unmap the pointer during early stage.
But as the mapping size equals to the acpi_table_header.length
(see acpi_tb_init_table_descriptor() and acpi_tb_validate_table()), when
such a convenient result is returned, driver code will start to use it
instead of accessing acpi_table_header to obtain the length.
Thus this patch cleans up the drivers by replacing returned table size with
acpi_table_header.length, and should be a no-op.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fixes: 7c83d7abc9 ("drm/amdgpu: Only update the CUR_SIZE register when
necessary")
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
<drm/drm_crtc.h> used to define most of the in-kernel KMS API. It has
now been split into separate files for each object type, but still
includes most other KMS headers to avoid breaking driver compilation.
As a step towards fixing that problem, remove the inclusion of
<drm/drm_encoder.h> from <drm/drm_crtc.h> and include it instead where
appropriate. Also remove the forward declarations of the drm_encoder and
drm_encoder_helper_funcs structures from <drm/drm_crtc.h> as they're not
needed in the header.
<drm/drm_encoder.h> now has to include <drm/drm_mode.h> and contain a
forward declaration of struct drm_encoder in order to allow including it
as the first header in a compilation unit.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> # For vmwgfx
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com
Pull vfs updates from Al Viro:
- more ->d_init() stuff (work.dcache)
- pathname resolution cleanups (work.namei)
- a few missing iov_iter primitives - copy_from_iter_full() and
friends. Either copy the full requested amount, advance the iterator
and return true, or fail, return false and do _not_ advance the
iterator. Quite a few open-coded callers converted (and became more
readable and harder to fuck up that way) (work.iov_iter)
- several assorted patches, the big one being logfs removal
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
logfs: remove from tree
vfs: fix put_compat_statfs64() does not handle errors
namei: fold should_follow_link() with the step into not-followed link
namei: pass both WALK_GET and WALK_MORE to should_follow_link()
namei: invert WALK_PUT logics
namei: shift interpretation of LOOKUP_FOLLOW inside should_follow_link()
namei: saner calling conventions for mountpoint_last()
namei.c: get rid of user_path_parent()
switch getfrag callbacks to ..._full() primitives
make skb_add_data,{_nocache}() and skb_copy_to_page_nocache() advance only on success
[iov_iter] new primitives - copy_from_iter_full() and friends
don't open-code file_inode()
ceph: switch to use of ->d_init()
ceph: unify dentry_operations instances
lustre: switch to use of ->d_init()
v2: always init gfx pg for asics that can support.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set valid data to mmRLC_SRM_INDEX_CNTL_ADDRx/DATAx.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
the CP_PG_DISABLE bit was reversed.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
it does not work with GPU pass through if the VM
is not cleanly shutdown leading to a hang when the
modules is reloaded.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJYT3qqAAoJEAx081l5xIa+dLMP/2dqBybSAeWlPmAwVenIHRtS
KFNktISezFSY/LBcIP2mHkFJmjTKBMZFxWnyEJL9NmFUD1cS2WMyNnC1282h/+rD
+P8Bsmzmt/daV4UTFxVDpzlmVlavAyakNi6FnSQfAfmf+3PB1yzU3gn8ld9pU/if
h7KEp9fDn9eYZreTRfCUloI2yoVpD9d0DG3uaGDN/N0kGUnCC6TZT5ig5j2JO016
fYf/DqoYAk3ItWF9WK/uG7qJIGi37afCpQq+kbSSJk+p3HjJqu8JUe9jzqYdl7j9
26TGSY5o9WLhZkxDgbcCIJzcFJhMmXgMdhjil9lqaHmnNG5FPFU7g8DK1CZqbel9
m8+aRPn1EgxIahMgdl8NblW1pfO2Kco0tZmoP5vXx1uqhivd67h0hiQqp66WxOJd
i2yMLncaCEv8M161CVEgtzuI5a7nCfaZv7J9ArzbkD/huBwu51IZgTs7Dz4njgvz
VPB5FBTB/ZYteErUNoh6gjF0hLngWvvJSPvuzT+EFO7yypek0IJ28GTdbxYSP+jR
13697s5Itigf/D3KUdRRGsWRzyVVN9n+djkl//sy5ddL9eOlKSKEga4ujOUjTWaW
hTvAxpK9GmJS/Iun5jIP6f75zDbi+e8FWUeB/OI2lPtnApaSKdXBTPXsco2RnTEV
+G6XrH8IMEIsTxOk7hWU
=7s/c
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.10' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main pull request for drm for 4.10 kernel.
New drivers:
- ZTE VOU display driver (zxdrm)
- Amlogic Meson Graphic Controller GXBB/GXL/GXM SoCs (meson)
- MXSFB support (mxsfb)
Core:
- Format handling has been reworked
- Better atomic state debugging
- drm_mm leak debugging
- Atomic explicit fencing support
- fbdev helper ops
- Documentation updates
- MST fbcon fixes
Bridge:
- Silicon Image SiI8620 driver
Panel:
- Add support for new simple panels
i915:
- GVT Device model
- Better HDMI2.0 support on skylake
- More watermark fixes
- GPU idling rework for suspend/resume
- DP Audio workarounds
- Scheduler prep-work
- Opregion CADL handling
- GPU scheduler and priority boosting
amdgfx/radeon:
- Support for virtual devices
- New VM manager for non-contig VRAM buffers
- UVD powergating
- SI register header cleanup
- Cursor fixes
- Powermanagement fixes
nouveau:
- Powermangement reworks for better voltage/clock changes
- Atomic modesetting support
- Displayport Multistream (MST) support.
- GP102/104 hang and cursor fixes
- GP106 support
hisilicon:
- hibmc support (BMC chip for aarch64 servers)
armada:
- add tracing support for overlay change
- refactor plane support
- de-midlayer the driver
omapdrm:
- Timing code cleanups
rcar-du:
- R8A7792/R8A7796 support
- Misc fixes.
sunxi:
- A31 SoC display engine support
imx-drm:
- YUV format support
- Cleanup plane atomic update
mali-dp:
- Misc fixes
dw-hdmi:
- Add support for HDMI i2c master controller
tegra:
- IOMMU support fixes
- Error handling fixes
tda998x:
- Fix connector registration
- Improved robustness
- Fix infoframe/audio compliance
virtio:
- fix busid issues
- allocate more vbufs
qxl:
- misc fixes and cleanups.
vc4:
- Fragment shader threading
- ETC1 support
- VEC (tv-out) support
msm:
- A5XX GPU support
- Lots of atomic changes
tilcdc:
- Misc fixes and cleanups.
etnaviv:
- Fix dma-buf export path
- DRAW_INSTANCED support
- fix driver on i.MX6SX
exynos:
- HDMI refactoring
fsl-dcu:
- fbdev changes"
* tag 'drm-for-v4.10' of git://people.freedesktop.org/~airlied/linux: (1343 commits)
drm/nouveau/kms/nv50: fix atomic regression on original G80
drm/nouveau/bl: Do not register interface if Apple GMUX detected
drm/nouveau/bl: Assign different names to interfaces
drm/nouveau/bios/dp: fix handling of LevelEntryTableIndex on DP table 4.2
drm/nouveau/ltc: protect clearing of comptags with mutex
drm/nouveau/gr/gf100-: handle GPC/TPC/MPC trap
drm/nouveau/core: recognise GP106 chipset
drm/nouveau/ttm: wait for bo fence to signal before unmapping vmas
drm/nouveau/gr/gf100-: FECS intr handling is not relevant on proprietary ucode
drm/nouveau/gr/gf100-: properly ack all FECS error interrupts
drm/nouveau/fifo/gf100-: recover from host mmu faults
drm: Add fake controlD* symlinks for backwards compat
drm/vc4: Don't use drm_put_dev
drm/vc4: Document VEC DT binding
drm/vc4: Add support for the VEC (Video Encoder) IP
drm: Add TV connector states to drm_connector_state
drm: Turn DRM_MODE_SUBCONNECTOR_xx definitions into an enum
drm/vc4: Fix ->clock_select setting for the VEC encoder
drm/amdgpu/dce6: Set MASTER_UPDATE_MODE to 0 in resume_mc_access as well
drm/amdgpu: use pin rather than pin_restricted in a few cases
...
Another pile of misc stuff, final one for 4.10. If there's some serious
bugfix still I'll send you a pull for drm-misc-next-fixes (like we do with
intel), otherwise this is it and next pull next year for 4.11.
Most interesting bits are probably Chris' fb helper fixes against mst
hotplug oopses.
* tag 'drm-misc-next-2016-12-08' of git://anongit.freedesktop.org/git/drm-misc: (22 commits)
drm: Take ownership of the dmabuf->obj when exporting
drm: Allow CAP_PRIME on !MODESET
drm/fence: add drm_crtc_create_fence()
drm/bridge: analogix: Don't return -EINVAL when panel doesn't support PSR
drm/atomic: doc: remove old comment about nonblocking commits
drm: Don't block the kworker waiting for mode_config.mutex in output_poll()
drm: Return -ENOTSUPP when called for KMS cap with a non-KMS driver
drm/amdgpu: don't add files at control minor debugfs directory
drm: allow changing DPMS mode
drm/qxl: fix use of uninitialized variable
drm/qxl: Don't register debugfs for control minors
drm/radeon: don't add files at control minor debugfs directory
drm/vmwgfx: Switch to mode_cmd2
drm/vgem: Use ww_mutex_(un)lock even with a NULL context
drm: Make the connector .detect() callback optional
drm/bridge: tc358767: don't warn if display side ASSR enable fails
drm: Initialise drm_mm.head_node.allocated
drm: Fix locking cargo-cult in encoder/plane init/cleanup
drm/doc: Fix indenting in drm_modeset_lock.c comment
drm: Protect fb_helper list manipulation with a mutex
...
Looks like this was missed when dce_v6_0.c was added.
Fixes: e2cdf640cb ("drm/amdgpu: add display controller implementation for si v10")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We don't require a resticted pinning in these cases, so just
use plain pin.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implemented for SGPRs for GFX v8 initially.
(v2) cleanup minor whitespace and remove sanity check and
addressing is in dwords not bytes
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows userspace components to fetch information
from the vbios image.
v2: agd: fix warning
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's necessary if we want to export vbios image out.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SR-IOV client, driver shouldn't touch the GFX hw during HW
fini, otherwise, gfx will fail to start after rebooting guest os.
Signed-off-by: shaoyunl <Shaoyun.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vi_structs.h has defined vi_mqd, drop redundant vi_mqd define.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes a rare NULL pointer dereference in amdgpu_ttm_bind.
The issue was found by Nicolai Haehnle.
The patch was tested by Nicolai Haehnle.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Normally only necessary when the cursor size changes.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The cursor size also affects the register programming.
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We were storing viewport relative coordinates. However, crtc_cursor_set2
and cursor_reset pass amdgpu_crtc->cursor_x/y as the x/y parameters of
cursor_move_locked, which would break if the CRTC isn't located at
(0, 0).
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GUI idle interrupts should be enabled only after we
have enabled coarse grain clock gating (CGCG). This
prevents GFX engine generating idle interrupt even
though CGCG is not completely enabled.
Most of the time this goes un-noticed, but on some
Stoney ASICs this results in GFX engine hang after
system resumes from suspend. The issue is not
particular to Stoney though and could have occured
on any ASIC. The patch fixes this issue.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reported-by: Sunil Uttarwar <Sunil.Uttarwar1@amd.com>
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
VCE clocks are set to be disabled, when not in use.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
can't get uvd's state by uvd_enabled. uvd_enabled
is used for request higher mclk.
in multi-display case, mclk has been in highest clock,
no matter uvd's state changed, uvd_enabled will not
be changed.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Forget to check UCODE_ID_STORAGE case and will cause to print error
message when loading driver, correct it.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the root cause is we gate the clock to uvd vcpu.
mclk's change should need the response from uvd if
it is power on.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit a693e050ed.
This breaks on systems with huge amounts of system memory as we do not have
enough vram to store the page tables. Additionally, this is less of an issue
with the recent gtt manager changes.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Backmerge v4.9-rc8 to get at
commit e94bd1736f
Author: Michel Dänzer <michel.daenzer@amd.com>
Date: Wed Nov 30 17:30:01 2016 +0900
drm: Don't call drm_for_each_crtc with a non-KMS driver
so I can apply Michel's follow-up patch.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Since commit 8a357d1004 ("drm: Nerf DRM_CONTROL nodes"), a
struct drm_device's ->control member is always NULL.
In the case of CONFIG_DEBUG_FS=y, amdgpu_debugfs_add_files() accesses
->control->debugfs_root though. This results in a NULL pointer
dereference.
Fix this by omitting the drm_debugfs_create_files() call for the
control minor debugfs directory which is now non-existent anyway.
Fixes: 8a357d1004 ("drm: Nerf DRM_CONTROL nodes")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98915
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205203022.11671-1-nicstange@gmail.com
- lots of code cleanup
- lots of bug fixes
- expose rpm based fan info via hwmon
- lots of clock and powergating fixes
- SI register header cleanup and conversion to common format used by newer asics
* 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (54 commits)
drm/amdgpu: drop is_display_hung from display funcs
drm/amdgpu/uvd: reduce IB parsing overhead on UVD5+ (v2)
drm/amdgpu/uvd: consolidate code for fetching addr from ctx
drm/amdgpu: Disable DPM in virtualization
drm/amdgpu: use AMDGPU_GEM_CREATE_VRAM_CLEARED for VM PD/PTs (v2)
drm/amdgpu: improve AMDGPU_GEM_CREATE_VRAM_CLEARED handling (v2)
drm/amdgpu: fix error handling in amdgpu_bo_create_restricted
drm/amdgpu: fix amdgpu_fill_buffer (v2)
drm/amdgpu: remove amdgpu_irq_get_delayed
amdgpu: Wrap dev_err() calls on vm faults with printk_ratelimit()
amdgpu: Use dev_err() over vanilla printk() in vm_decode_fault()
drm/amd/amdgpu: port of DCE v6 to new headers (v3)
drm/amdgpu: cleanup unused iterator members for sdma v2.4
drm/amdgpu: cleanup unused iterator members for sdma v3
drm/amdgpu:impl vgt_flush for VI(V5)
drm/amdgpu: enable uvd mgcg for Fiji.
drm/amdgpu: refine cz uvd clock gate logic.
drm/amdgpu: change log level to KERN_INFO in ci_dpm.c
drm/amdgpu: always un-gate UVD REGS path.
drm/amdgpu/sdma: fix typo in packet setup
...
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYRIGyAAoJEHm+PkMAQRiG2ksH/jwMUT9j6glbwESxbn1YTqTM
QcBT5AMc7D0wNuidQe0hWZMtG4RbC+4ZhxzZl2wPgA2gueJ+rBnyX7bgtA7ka8ka
Fdc3u/Q1v38HPzf8iBnxcdCs40VgsoMLjFYCXrpOxuGDNKYzRd+Q8aI2TeGvzbyi
X8+6oAWifBwo2oA06jfcuUncEWbyDDyK9aQksmfKOpjHdb26yELPEhsPOlds1g7E
jYLnvUVnU2CoFaumta+rZQ0kzLdc4Ntu0wEao6WzJuQKsgoID+tS/6iudi8cUhDp
YowGAVoOfr6rAJB0mwrDVfugpamaT3386XKyocdNsK0/jR60UIJ8x+WzvvSU+lY=
=JTBj
-----END PGP SIGNATURE-----
Backmerge tag 'v4.9-rc8' into drm-next
Linux 4.9-rc8
Daniel requested this so we could apply some follow on fixes cleanly to -next.
Many drivers (21 to be exact) create connectors that are always
connected (for instance to an LVDS or DSI panel). Instead of forcing
them to implement a dummy .detect() handler, make the callback optional
and consider the connector as always connected in that case.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[seanpaul fixed small conflict in rcar-du/rcar_du_lvdscon.c]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
drm/qxl: various bugfixes and cleanups,
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=OYiT
-----END PGP SIGNATURE-----
Merge tag 'drm-qemu-20161121' of git://git.kraxel.org/linux into drm-next
drm/virtio: fix busid in a different way, allocate more vbufs.
drm/qxl: various bugfixes and cleanups,
* tag 'drm-qemu-20161121' of git://git.kraxel.org/linux: (224 commits)
drm/virtio: allocate some extra bufs
qxl: Allow resolution which are not multiple of 8
qxl: Don't notify userspace when monitors config is unchanged
qxl: Remove qxl_bo_init() return value
qxl: Call qxl_gem_{init, fini}
qxl: Add missing '\n' to qxl_io_log() call
qxl: Remove unused prototype
qxl: Mark some internal functions as static
Revert "drm: virtio: reinstate drm_virtio_set_busid()"
drm/virtio: fix busid regression
drm: re-export drm_dev_set_unique
Linux 4.9-rc5
gp8psk: Fix DVB frontend attach
gp8psk: fix gp8psk_usb_in_op() logic
dvb-usb: move data_mutex to struct dvb_usb_device
iio: maxim_thermocouple: detect invalid storage size in read()
aoe: fix crash in page count manipulation
lightnvm: invalid offset calculation for lba_shift
Kbuild: enable -Wmaybe-uninitialized warnings by default
pcmcia: fix return value of soc_pcmcia_regulator_set
...
The ATPX method does not always exist on the dGPU, it may be located at
the iGPU. The parent device of the iGPU is the root port for which
bridge_d3 is false. This accidentally enables the legacy PM method which
conflicts with port PM and prevented the dGPU from powering on.
Fixes: 1db4496f16 ("drm/amdgpu: fix power state when port pm is unavailable")
Reported-and-tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # 4.8+
UVD 5 and newer do not have the same placement limitations
as older chips, so skip the first pass since it's just
overhead on chips where we don't have to force placement.
v2: fix inverted logic
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same code duplicated in both functions.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is used for virtualization support. In virtualization,
only SMU manager is needed, DPM should be disabled. This is a
use case for commit 2f9346b6f984
("drm/amdgpu/powerplay: pp module only enable smu when dpm disabled.")
Signed-off-by: Trigger Huang <trigger.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Doesn't make much sense to have the same functionality twice.
v2: rebase on dma_fence renaming
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop this whole reserve/unreserve dance, just lock the
reservation object manually when creating the BO.
v2: rebase on dma_fence renaming
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Manually checking why a function could fail is not a good idea
if you can just check the functions return code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The mem start is relative to the domain in the address space, so this
worked only when VRAM was mapped at offset 0.
It also didn't handled multiple drm_mm_nodes for split VRAM.
v2: rebase on dma_fence renaming
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It can be the case that upon GPU page faults we start trashing
the logs, and so let us ratelimit here to avoid that.
V2. Fix issue where calling dev_err_ratelimited separately for
each line means that some lines corresponding to a single
VM fault may or may not appear depending on the rate.
- Michel Dänzer.
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Port of SI DCE v6 over to new AMDGPU headers. Tested on a
Tahiti with GNOME through various hot plugs/rotations/sizes/fullscreen/windowed and
staging drm/xf86-video-amdgpu.
(v2) Re-factored to remove formatting changes to si_enums.h
as well rename various defines.
(v3) Rebase on upstream
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when shadowing enabled, tesselation app will trigger
vm fault because below three tesselation registers:
VGT_TF_RING_SIZE__CI__VI,
VGT_HS_OFFCHIP_PARAM__CI__VI,
VGT_TF_MEMORY_BASE__CI__VI,
need to be programed after vgt-flush.
Tesselation picture vm fault disappeared after vgt-flush
introduced.
v2:implement vgt-flush for CI & SI.
v3:move vgt flush inside of cntx_cntrl
v4:count vgt flush in frame_size
v5:squash in typo fix
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sw clockgate was used on uvd6.0.
when uvd is idle, we gate the uvd clock.
when decode, we ungate the uvd clock.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When PCIe port PM is not enabled (system BIOS is pre-2015 or the
pcie_port_pm=off parameter is set), legacy ATPX PM should still be
marked as supported. Otherwise the GPU can fail to power on after
runtime suspend. This affected a Dell Inspiron 5548.
Ideally the BIOS date in the PCI core is lowered to 2013 (the first year
where hybrid graphics platforms using power resources was introduced),
but that seems more risky at this point and would not solve the
pcie_port_pm=off issue.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98505
Reported-and-tested-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # 4.8+
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Only remaining use was in amdgpu, and trivial to convert over to
drm_crtc_vblank_* variants.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114090255.31595-5-daniel.vetter@ffwll.ch
This old code pattern was reintroduced in
Author: Ken Wang <Qingqing.Wang@amd.com>
Date: Tue Jan 19 14:03:24 2016 +0800
drm/amdgpu: add display controller implementation for si v10
Realign it with later display code. Tsk, tsk for massive copypasting
;-)
Cc: Christian König <christian.koenig@amd.com>
Cc: Ken Wang <Qingqing.Wang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com> for the whole series.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114090255.31595-1-daniel.vetter@ffwll.ch
1,cleanup description/comments
2,for FIJI & passthrough, force post when smc fw version below 22.15
3,for other cases, follow regular rules
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the correct define. No functional change as both
defines are equivalent.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function's behaviour was changed in 90844f0004, without changing
its signature, causing people to keep using it the old way without
realising they were now leaking memory.
Rob Clark also noticed it was also allocating GFP_KERNEL memory in
atomic contexts, breaking them.
Instead of having to allocate GFP_ATOMIC memory and fixing the callers
to make them cleanup the memory afterwards, let's change the function's
signature by having the caller take care of the memory and passing it to
the function.
The new parameter is a single-field struct in order to enforce the size
of its buffer and help callers to correctly manage their memory.
Fixes: 90844f0004 ("drm: make drm_get_format_name thread-safe")
Cc: Rob Clark <robdclark@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Sinclair Yeh <syeh@vmware.com> (vmwgfx)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161112011309.9799-1-eric@engestrom.ch
Port the GMC v6 driver over to the new SI headers.
Tested with a Tahiti SI ASIC.
(v2) Fixed a couple of typos (in commented code) and moved
defines to si_enums.h
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This only has the effect of scanning the invisible range twice
since the topdown flag is given anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: JimQu <Jim.Qu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This disables the VRAM manager when a special placement is requested, otherwise
we play ping/pong with the buffers on every command submission.
v2: only check lpfn
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: JimQu <Jim.Qu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. fix uvd cg status not correct.
2. fix uvd pg can't work on tonga.
3. enable uvd mgcg.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for the debugfs wave reader.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This changes the gfx v6 driver to use the new AMDGPU style
SI headers. Also fixes a variety of coding style issues, white
space issues, and uses WREG32_FIELD in a few places where
appropriate.
Tested with a Tahiti 0x679A.
v2: Squash in typo fix patch
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing gca MMIO registers and defines necessary for the
next patch which re-works a lot of gfx v6 to use the new SI
headers.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace direct comparisons to NULL i.e.
'x == NULL' with '!x'. As per coding standard.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ravikant B Sharma <ravikant.s2@samsung.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
De-numberify indirect register access for gfx v8.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
De-numberify indirect register access for gfx v7.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. partial revert commit 91db308d6e96.
not set uvd bypass mode.
2. enable uvd cg before initialize uvd.
3. set uvd clock to default value 100MHz.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KIQ is used for interaction between driver and
CP, and not exposed to outside client, as such it
doesn't need to be handled by GPU scheduler.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Trigger Huang <trigger.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new ring type definition for KIQ. KIQ is used for interaction
between driver and CP.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Trigger Huang <trigger.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UVD clocks are set to be disabled, when not in use.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tom StDenis <Tom.StDenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only for cards that are supported by powerplay.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In fence waiting, it never return -EDEADLK yet, so drop this function
here.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
External clients which import our bo's wait only
for exclusive dmabuf-fences, not on shared ones,
ditto for bo's which we import from external
providers and write to.
Therefore attach exclusive fences on prime shared buffers
if our exported buffer gets imported by an external
client, or if we import a buffer from an external
exporter.
See discussion in thread:
https://lists.freedesktop.org/archives/dri-devel/2016-October/122370.html
Prime export tested on Intel iGPU + AMD Tonga dGPU as
DRI3/Present Prime render offload, and with the Tonga
standalone as primary gpu.
v2: Add a wait for all shared fences before prime export,
as suggested by Christian Koenig.
v3: - Mark buffer prime_exported in amdgpu_gem_prime_pin,
so we only use the exclusive fence when exporting a
bo to external clients like a separate iGPU, but not
when exporting/importing from/to ourselves as part of
regular DRI3 fd passing.
- Propagate failure of reservation_object_wait_rcu back
to caller.
v4: - Switch to a prime_shared_count counter instead of a
flag, which gets in/decremented on prime_pin/unpin, so
we can switch back to shared fences if all clients
detach from our exported bo.
- Also switch to exclusive fence for prime imported bo's.
v5: - Drop lret, instead use int ret -> long ret, as proposed
by Christian.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95472
Tested-by: Mike Lothian <mike@fireburn.co.uk> (v1)
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Cc: Christian König <christian.koenig@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
- better atomic state debugging from Rob
- fence prep from gustavo
- sumits flushed out his backlog of pending dma-buf/fence patches from
various people
- drm_mm leak debugging plus trying to appease Kconfig (Chris)
- a few misc things all over
* tag 'topic/drm-misc-2016-11-10' of git://anongit.freedesktop.org/drm-intel: (35 commits)
drm: Make DRM_DEBUG_MM depend on STACKTRACE_SUPPORT
drm/i915: Restrict DRM_DEBUG_MM automatic selection
drm: Restrict stackdepot usage to builtin drm.ko
drm/msm: module param to dump state on error irq
drm/msm/mdp5: add atomic_print_state support
drm/atomic: add debugfs file to dump out atomic state
drm/atomic: add new drm_debug bit to dump atomic state
drm: add helpers to go from plane state to drm_rect
drm: add helper for printing to log or seq_file
drm: helper macros to print composite types
reservation: revert "wait only with non-zero timeout specified (v3)" v2
drm/ttm: fix ttm_bo_wait
dma-buf/fence: revert "don't wait when specified timeout is zero" (v2)
dma-buf/fence: make timeout handling in fence_default_wait consistent (v2)
drm/amdgpu: add the interface of waiting multiple fences (v4)
dma-buf: return index of the first signaled fence (v2)
MAINTAINERS: update Sync File Framework files
dma-buf/sw_sync: put fence reference from the fence creation
dma-buf/sw_sync: mark sync_timeline_create() static
drm: Add stackdepot include for DRM_DEBUG_MM
...
v2: agd: rebase and squash in all the previous optimizations and
changes so everything compiles.
v3: squash in Slava's 32bit build fix
v4: rebase on drm-next (fence -> dma_fence),
squash in Monk's ioctl update patch
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: fix checkpatch warnings]
Link: http://patchwork.freedesktop.org/patch/msgid/1478290570-30982-2-git-send-email-alexander.deucher@amd.com
A few more fixes for 4.9.
* 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: add some error handling to amdgpu_init v2
drm/amd: fix scheduler fence teardown order v2
drm/amd/powerplay: don't succeed in getters if fan is missing
drm/amdgpu: make sure ddc_bus is valid in connector unregister
drm/radeon: Fix kernel panic on shutdown
drm/amdgpu: disable runtime pm in certain cases
drm/radeon: disable runtime pm in certain cases
drm/amdgpu: add support for new smc firmware on iceland
drm/amdgpu: add support for new smc firmware on tonga
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYHmoCAAoJEHm+PkMAQRiG7RMIAI2i7Y5hpL5yCxK5AFaL4u/G
KxXfp1B1UanUTgjOmd7zGqtDYcFX9t7GTTUFixQ7/9Opr4PD9qbnatoDGSc3xjbT
msDgA1B78F1/Q3kHWfeGq32MihQ4mj5NwUCo+igUcUvvWG7mHgzErj/Nh5RoobQX
p/izdpTbrw3GX6xXB8olbG7XWHaVye/+TT3q6+gmgm8I/QEujcLeGoycE0zlhPN8
FG/JX76At/+ZM2Py7Oxo3k+oKL9CHrtOQYDp/wN0uslV5eYvvkZz0/M1HMOGZt+c
gZU5jzM17K7C4Nzo06WAuBU9wUBGc25m+cPicLlOmljnzfU+f50SKaDjZq3p7QI=
=2KUF
-----END PGP SIGNATURE-----
Backmerge tag 'v4.9-rc4' into drm-next
Linux 4.9-rc4
This is needed for nouveau development.
Just to be clean should we ever run into -ENOMEM during module init.
v2: fix typo in commit message
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some fences might be alive even after we have stopped the scheduler leading
to warnings about leaked objects from the SLUB allocator.
Fix this by allocating/freeing the SLUB allocator from the module
init/fini functions just like we do it for hw fences.
v2: make variable static, add link to bug
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=97500
Reported-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This should only happen on boards TV connectors which do not
have a ddc bus for those connectors. None of the asics supported
by amdgpu support tv, so we shouldn't hit this, but check
to be on the safe side (e.g., bios bug for example).
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the platform does not support hybrid graphics or ATPX dGPU
power control.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Pull request already again to get the s/fence/dma_fence/ stuff in and
allow everyone to resync. Otherwise really just misc stuff all over, and a
new bridge driver.
* tag 'topic/drm-misc-2016-10-27' of git://anongit.freedesktop.org/git/drm-intel:
drm/bridge: fix platform_no_drv_owner.cocci warnings
drm/bridge: fix semicolon.cocci warnings
drm: Print some debug/error info during DP dual mode detect
drm: mark drm_of_component_match_add dummy inline
drm/bridge: add Silicon Image SiI8620 driver
dt-bindings: add Silicon Image SiI8620 bridge bindings
video: add header file for Mobile High-Definition Link (MHL) interface
drm: convert DT component matching to component_match_add_release()
dma-buf: Rename struct fence to dma_fence
dma-buf/fence: add an lockdep_assert_held()
drm/dp: Factor out helper to distinguish between branch and sink devices
drm/edid: Only print the bad edid when aborting
drm/msm: add missing header dependencies
drm/msm/adreno: move function declarations to header file
drm/i2c/tda998x: mark symbol static where possible
doc: add missing docbook parameter for fence-array
drm: RIP mode_config->rotation_property
drm/msm/mdp5: Advertize 180 degree rotation
drm/msm/mdp5: Use per-plane rotation property
v2: move return value check as well
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix pm-hibernate bug, when suspend/resume, dpm start failed.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the value of last_mclk_dpm_enable_mask will be changed if
other clients(vce,dal) trigger set power state between enable
and disable uvd dpm.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes a regression in all these drivers since the cache
mode tracking was fixed for mixed mappings. It uses the new
arch API to add the VRAM range to the PAT mapping tracking
tables.
Fixes: 87744ab383 (mm: fix cache mode tracking in vm_insert_mixed())
Reviewed-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This way we can correctly check split VRAM buffers as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way the driver can decide if it is valuable to evict a BO or not.
The current implementation is added as default to all existing drivers.
v2: fix some typos found during internal testing
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We get 2 warnings when building kernel with W=1:
drivers/gpu/drm/amd/amdgpu/si.c:908:5: warning: no previous prototype for 'si_pciep_rreg' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/si.c:921:6: warning: no previous prototype for 'si_pciep_wreg' [-Wmissing-prototypes]
In fact, both functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks these functions with 'static'.
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We get a few warnings when building kernel with W=1:
drivers/gpu/drm/amd/amdgpu/atombios_crtc.c:38:6: warning: no previous prototype for 'amdgpu_atombios_crtc_overscan_setup' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/dce_v8_0.c:661:6: warning: no previous prototype for 'dce_v8_0_disable_dce' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:40:5: warning: no previous prototype for 'amdgpu_gfx_scratch_get' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:62:6: warning: no previous prototype for 'amdgpu_gfx_scratch_free' [-Wmissing-prototypes]
....
In fact, these functions are declared in
drivers/gpu/drm/amd/amdgpu/atombios_crtc.h
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
drivers/gpu/drm/amd/amdgpu/dce_v8_0.h
drivers/gpu/drm/amd/amdgpu/dce_v10_0.h
drivers/gpu/drm/amd/amdgpu/dce_v11_0.h
drivers/gpu/drm/amd/powerplay/inc/pp_acpi.h.
So this patch adds missing header dependencies.
By the way, this patch changes declaration of amdgpu_gfx_parse_disable_cu()
to subject to its implement, and clean three function declarations
in pp_acpi.h up.
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix random CamelCase that has annoyed me for a while.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leftovers from the radeon.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move from asic specific code to common atom code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than open coding it.
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the problems with killing VCE sessions in VM mode.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way we can use parse_cs and still keep VM mode enabled.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KV/KB/ML was missed these was implemented for other asics.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the rest of the basic SQ WAVE fields to
finish off the implementation. Eventually,
a separate interface will be needed for GPRs.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move IP version specific code into a callback.
Also add support for gfx7 devices.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add PG lock support as well as bank selection to
the MMIO write function.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow any of the se/sh/instance fields to be
specified as a broadcast by submitting 0x3FF.
(v2) Fix broadcast range checking
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On non VI/CZ platforms it would not free
the grbm index lock.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently supports CZ/VI. Allows nearly atomic read
of wave data from GPU.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This makes it easier to replace specific IP blocks on
asics for handling virtual_dce, DAL, etc. and for building
IP lists for hw or tables. This also stored the status
information in the same structure.
v2: split out spelling fix into a separate patch
add a function to add IPs to the list
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Returns the vce clock table for the user mode driver.
The user mode driver can fill this data into vce clock
data packet for optimal VCE DPM.
v2: update to the new API
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used by the non-powerplay dpm code.
v2: update to the new API
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Will be used by the new info ioctl query.
v2: fetch a single state per request
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They are constant as well.
v2: update uvd and vce phys ring structures as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's constant, so it doesn't make to much sense to keep it
with the variable data.
v2: update vce and uvd phys mode ring structures as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I should have suggested that on the initial patchset. This saves us a
few CPU cycles during CS and a bunch of loc.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sed -i "/\.parse_cs = NULL,/d" drivers/gpu/drm/amd/amdgpu/*.c
That's just a leftover from radeon.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the padding raised to 256 DW that shouldn't be needed any more.
v2: reduce estimation as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a ring doesn't support that it shouldn't implement the function.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The same as on windows to avoid further problems with CE/DE
command submission overlaps.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the comment to explain why we do this.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using the cached values has less latency for bare metal
and SR-IOV, and prevents reading back bogus values if the
engine is powergated.
v2: fix typo in tile idx calculation
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simplify the code and properly set the csb for harvest values.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Needed when for SR-IOV and when PG is enabled.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to cache some additional values to handle SR-IOV
and PG.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of messing with the PD directly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only cleanup, no intended functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only cleanup, no intended functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only cleanup, no intended functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Saves us a bit of memory.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Saves a bunch of CPU cycles when swapping things back in and
allows us to split the VM headers into a separate file.
v2: rename parameters
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's completely pointless to have two pointers to the
device in the same structure.
v2: rename function to amdgpu_ttm_adev, fix typos
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tested by reading tile/clk bits during load/idle.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Far less CPU cycles needed for this approach.
v2: fix typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for GFX8, gfx ring's wptr_addr is needed by SRIOV & CP for polling.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
we found some MEC ucode leads to IB test fail or even
ring test fail if Jump Table of it is not start in
FW bo with page aligned address, fixed by always make
JT address page aligned.
we don't need to patch JT2 for MEC2, because for VI,
MEC2 is a copy of MEC1, thus when converting fw_type
for MEC_JT2 we just return MEC1,hw can use the same
JT for both MEC1 & MEC2.
above two change fixed some ring/ib test failure issue
for some version of MEC ucode.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for sriov, SMC need MEC_STORAGE reserved in fw bo.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Frank Min <frank.min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for GTT memory SMC can only access it within PF space, which is not
used for SRIOV case, thus for SRIOV case, we let SMC use FB space for
ucode bo.
Signed-off-by: Frank Min <frank.min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for VI smc, index_0 to index_8 are all not safe,
they may used by BIOS/FW, and index_11 is reserved
only for driver.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split VRAM allocations into 4MB blocks.
v2: fix typo in comment, some suggested cleanups
v3: document how to disable the feature, fix rebase issue
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to move scattered buffers around.
v2: fix a couple of typos, handle scattered to scattered moves as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows us to map scattered VRAM BOs to the VMs.
v2: fix offset handling, use pfn instead of offset,
fix PAGE_SIZE != AMDGPU_GPU_PAGE_SIZE case
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise the new VM code becomes confused.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split VRAM won't have a valid offset, so just set an explicit limit
when the flag is given to trigger reallocation if necessary.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a flag noting that a BO must be created using linear VRAM
and set this flag on all in kernel users where appropriate.
Hopefully I haven't missed anything.
v2: add it in a few more places, fix CPU mapping.
v3: rename to VRAM_CONTIGUOUS, fix typo in CS code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to hard code the entire register to just
set/clear one bit.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use an address offset like other dce code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to hard code the entire register to just
set/clear one bit.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use an address offset like other dce code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable multi crtcs for virtual display, user can set the number of crtcs
by amdgpu module parameter virtual_display.
v2: make timers per crtc
v3: agd: simplify implementation
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-By: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to emulate all of the stuff for real hw.
v2: warning fix
Reviewed-By: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We handle the virtual interrupts from a timer so no
need to try an look like we are handling IV ring events.
Reviewed-By: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Virtual crtcs interrupts do not show up in the IV ring,
so it will never be called.
Reviewed-By: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Never used.
Reviewed-By: Emily Deng <Emily.Deng@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Older firmware versions don't support 3 rings.
fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=98016
v2: use define for fw version
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
First -misc pull for 4.10:
- drm_format rework from Laurent
- reservation patches from Chris that missed 4.9.
- aspect ratio support in infoframe helpers and drm mode/edid code
(Shashank Sharma)
- rotation rework from Ville (first parts at least)
- another attempt at the CRC debugfs interface from Tomeu
- piles and piles of misc patches all over
* tag 'topic/drm-misc-2016-10-24' of git://anongit.freedesktop.org/drm-intel: (55 commits)
drm: Use u64 for intermediate dotclock calculations
drm/i915: Use the per-plane rotation property
drm/omap: Use per-plane rotation property
drm/omap: Set rotation property initial value to BIT(DRM_ROTATE_0) insted of 0
drm/atmel-hlcdc: Use per-plane rotation property
drm/arm: Use per-plane rotation property
drm: Add support for optional per-plane rotation property
drm/atomic: Reject attempts to use multiple rotation angles at once
drm: Add drm_rotation_90_or_270()
dma-buf/sync_file: hold reference to fence when creating sync_file
drm/virtio: kconfig: Fixup white space.
drm/fence: release fence reference when canceling event
drm/i915: Handle early failure during intel_get_load_detect_pipe
drm/fb_cma_helper: do not free fbdev if there is none
drm: fix sparse warnings on undeclared symbols in crc debugfs
gpu: Remove depends on RESET_CONTROLLER when not a provider
i915: don't call drm_atomic_state_put on invalid pointer
drm: Don't export the drm_fb_get_bpp_depth() function
drm/arm: mali-dp: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()
drm: vmwgfx: Replace drm_fb_get_bpp_depth() with drm_format_info()
...
To free fences, call_rcu() is used, which calls amdgpu_fence_free()
after a grace period. During teardown, there is no guarantee all
callbacks have finished, so amdgpu_fence_slab may be destroyed before
all fences have been freed. If we are lucky, this results in some slab
warnings, if not, we get a crash in one of rcu threads because callback
is called after amdgpu has already been unloaded.
Fix it with a rcu_barrier().
Fixes: b44135351a ("drm/amdgpu: RCU protected amdgpu_fence_release")
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like .last_flush reference is left at teardown.
Leak reported by CONFIG_SLUB_DEBUG.
Fixes: 41d9eb2c5a ("drm/amdgpu: add a fence after the VM flush")
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flush any outstanding thermal work before tearing down
the dpm driver.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cancel any pending reset work when we tear down the driver.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to retain previous settings as this is the first time
we set pg_flags. Probably a copy/paste typo from the CZ code.
Avoids confusion.
No change in behavior as adev is kzallocated.
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's technically an MC register so make sure we initialize it
in the MC module rather than the gfx module. Since other bits
in the same register are used to enable ATC CG features make
sure we apply the golden setting first.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need this for more than just DCE. Move it out of the DCE modules
and into the device code. This way we can be sure the scratch registers
are initialized properly before we run asic_init which happens before
DCE IPs are restored.
Fixes atombios hangs in asic_init.
Reviewed-by: JimQu <Jim.Qu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is already handled by the dce IP modules in their
suspend and resume code. No need to do it again.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge the gup_flags cleanups from Lorenzo Stoakes:
"This patch series adjusts functions in the get_user_pages* family such
that desired FOLL_* flags are passed as an argument rather than
implied by flags.
The purpose of this change is to make the use of FOLL_FORCE explicit
so it is easier to grep for and clearer to callers that this flag is
being used. The use of FOLL_FORCE is an issue as it overrides missing
VM_READ/VM_WRITE flags for the VMA whose pages we are reading
from/writing to, which can result in surprising behaviour.
The patch series came out of the discussion around commit 38e0885465
("mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing"),
which addressed a BUG_ON() being triggered when a page was faulted in
with PROT_NONE set but having been overridden by FOLL_FORCE.
do_numa_page() was run on the assumption the page _must_ be one marked
for NUMA node migration as an actual PROT_NONE page would have been
dealt with prior to this code path, however FOLL_FORCE introduced a
situation where this assumption did not hold.
See
https://marc.info/?l=linux-mm&m=147585445805166
for the patch proposal"
Additionally, there's a fix for an ancient bug related to FOLL_FORCE and
FOLL_WRITE by me.
[ This branch was rebased recently to add a few more acked-by's and
reviewed-by's ]
* gup_flag-cleanups:
mm: replace access_process_vm() write parameter with gup_flags
mm: replace access_remote_vm() write parameter with gup_flags
mm: replace __access_remote_vm() write parameter with gup_flags
mm: replace get_user_pages_remote() write/force parameters with gup_flags
mm: replace get_user_pages() write/force parameters with gup_flags
mm: replace get_vaddr_frames() write/force parameters with gup_flags
mm: replace get_user_pages_locked() write/force parameters with gup_flags
mm: replace get_user_pages_unlocked() write/force parameters with gup_flags
mm: remove write/force parameters from __get_user_pages_unlocked()
mm: remove write/force parameters from __get_user_pages_locked()
mm: remove gup_flags FOLL_WRITE games from __get_user_pages()
This removes the 'write' and 'force' from get_user_pages() and replaces
them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers
as use of this flag can result in surprising behaviour (and hence bugs)
within the mm subsystem.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=sGp1
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.9-rc2' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Just had a couple of amdgpu fixes and one core fix I wanted to get out
early to fix some regressions.
I'm sure I'll have more stuff this week for -rc2"
* tag 'drm-fixes-for-v4.9-rc2' of git://people.freedesktop.org/~airlied/linux: (22 commits)
drm: Print device information again in debugfs
drm/amd/powerplay: fix bug stop dpm can't work on Vi.
drm/amd/powerplay: notify smu no display by default.
drm/amdgpu/dpm: implement thermal sensor for CZ/ST
drm/amdgpu/powerplay: implement thermal sensor for CZ/ST
drm/amdgpu: disable smu hw first on tear down
drm/amdgpu: fix amdgpu_need_full_reset (v2)
drm/amdgpu/si_dpm: Limit clocks on HD86xx part
drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c
drm/amdgpu: potential NULL dereference in debugfs code
drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c
drm/amd/powerplay: fix static checker warnings in iceland_smc.c
drm/radeon: change vblank_time's calculation method to reduce computational error.
drm/amdgpu: change vblank_time's calculation method to reduce computational error.
drm/amdgpu: clarify UVD/VCE special handling for CG
drm/amd/amdgpu: enable clockgating only after late init
drm/radeon: allow TA_CS_BC_BASE_ADDR on SI
drm/amdgpu: initialize the context reset_counter in amdgpu_ctx_init
drm/amdgpu/gfx8: fix CGCG_CGLS handling
drm/radeon: fix modeset tear down code
...
IP types are not an index. Each asic may have number and
type of IPs. Properly check the the type rather than
using the type id as an index.
v2: fix all the IPs to not use IP type as an idx as well.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Limit clocks on a specific HD86xx part to avoid
crashes (while awaiting an appropriate PP fix).
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
debugfs_create_file() returns NULL on error, it only returns error
pointers if debugfs isn't enabled in the config and we checked for that
earlier so it can't happen.
Fixes: 4f4824b556 ('drm/amd/amdgpu: Convert ring debugfs entries to binary')
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
UVD and VCE CG are handled specially, however the previous
fix for this skipped late init for those blocks rather than
just CG. Just protect the CG function call. No functional
change since UVD and VCE don't currently utilize a late_init
function.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sometimes during multiple reboots, the system hangs
during bootup. The issue is very random and happens
once in around 50 reboots or so.
It seems if clockgating is enabled before late init,
the GFX engine sometimes does not respond.
This patch changes the ordering a little so that
both powergating and clockgating are enabled only
after late init calls.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Tested-by: Sunil Uttarwar <Sunil.Uttarwar1@amd.com>
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ensure that we really only report a GPU reset if one has happened since the
creation of the context.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When setting up the RLC, only disable the CGCG and
CGLS bits rather than clearing the entire register
to avoid losing the golden settings.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
When DisplayPort AUX channel i2c adapter is registered, drm_connector's
kdev member is used as a parent, so we get sysfs structure like:
/drm/card1/card1-DP-2/i2c-12
Because of that, there is a problem when drm core (and not the driver)
calls drm_connector_unregister(), it removes parent sysfs entries
('card1-DP-2' in our example) while the i2c adapter is still registered.
Later we get a WARN when we try to unregister the i2c adapter:
WARNING: CPU: 3 PID: 1374 at fs/sysfs/group.c:243 sysfs_remove_group+0x14c/0x150
sysfs group ffffffff82911e40 not found for kobject 'i2c-12'
To fix it, we can use the .early_unregister hook to unregister the i2c
adapter before drm_connector's sysfs is torn down.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since fence_wait_timeout_reservation_object_wait_timeout_rcu() with a
timeout of 0 becomes reservation_object_test_signaled_rcu(), we do not
need to handle such conversion in the caller. The only challenge are
those callers that wish to differentiate the error code between the
nonblocking busy check and potentially blocking wait.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160829070834.22296-1-chris@chris-wilson.co.uk
Pull drm updates from Dave Airlie:
"Core:
- Fence destaging work
- DRIVER_LEGACY to split off legacy drm drivers
- drm_mm refactoring
- Splitting drm_crtc.c into chunks and documenting better
- Display info fixes
- rbtree support for prime buffer lookup
- Simple VGA DAC driver
Panel:
- Add Nexus 7 panel
- More simple panels
i915:
- Refactoring GEM naming
- Refactored vma/active tracking
- Lockless request lookups
- Better stolen memory support
- FBC fixes
- SKL watermark fixes
- VGPU improvements
- dma-buf fencing support
- Better DP dongle support
amdgpu:
- Powerplay for Iceland asics
- Improved GPU reset support
- UVD/VEC powergating support for CZ/ST
- Preinitialised VRAM buffer support
- Virtual display support
- Initial SI support
- GTT rework
- PCI shutdown callback support
- HPD IRQ storm fixes
amdkfd:
- bugfixes
tilcdc:
- Atomic modesetting support
mediatek:
- AAL + GAMMA engine support
- Hook up gamma LUT
- Temporal dithering support
imx:
- Pixel clock from devicetree
- drm bridge support for LVDS bridges
- active plane reconfiguration
- VDIC deinterlacer support
- Frame synchronisation unit support
- Color space conversion support
analogix:
- PSR support
- Better panel on/off support
rockchip:
- rk3399 vop/crtc support
- PSR support
vc4:
- Interlaced vblank timing
- 3D rendering CPU overhead reduction
- HDMI output fixes
tda998x:
- HDMI audio ASoC support
sunxi:
- Allwinner A33 support
- better TCON support
msm:
- DT binding cleanups
- Explicit fence-fd support
sti:
- remove sti415/416 support
etnaviv:
- MMUv2 refactoring
- GC3000 support
exynos:
- Refactoring HDMI DCC/PHY
- G2D pm regression fix
- Page fault issues with wait for vblank
There is no nouveau work in this tree, as Ben didn't get a pull
request in, and he was fighting moving to atomic and adding mst
support, so maybe best it waits for a cycle"
* tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits)
drm/crtc: constify drm_crtc_index parameter
drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next
drm/i915/guc: Unwind GuC workqueue reservation if request construction fails
drm/i915: Reset the breadcrumbs IRQ more carefully
drm/i915: Force relocations via cpu if we run out of idle aperture
drm/i915: Distinguish last emitted request from last submitted request
drm/i915: Allow DP to work w/o EDID
drm/i915: Move long hpd handling into the hotplug work
drm/i915/execlists: Reinitialise context image after GPU hang
drm/i915: Use correct index for backtracking HUNG semaphores
drm/i915: Unalias obj->phys_handle and obj->userptr
drm/i915: Just clear the mmiodebug before a register access
drm/i915/gen9: only add the planes actually affected by ddb changes
drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED
drm/i915/bxt: Fix HDMI DPLL configuration
drm/i915/gen9: fix the watermark res_blocks value
drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations
drm/i915/gen9: minimum scanlines for Y tile is not always 4
drm/i915/gen9: fix the WaWmMemoryReadLatency implementation
drm/i915/kbl: KBL also needs to run the SAGV code
...
Just some misc bug fixes for 4.9.
* 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: revert "use more than 64KB fragment size if possible"
drm/amdgpu: warn if dp aux is still attached on free
drm/amdgpu/dce11: add missing drm_mode_config_cleanup call
drm/amdgpu: also track late init state
drm/amdgpu/virtual_dce: adjust config ifdef
drm/amdgpu/vce: add support for hw config packet (v2)
drm/amdgpu: clean up to set fw_offset as 0 twice
drm/amdgpu: remove DRM_AMD_POWERPLAY
drm/radeon: Prevent races on pre DCE4 between flip submission and completion.
drm/radeon: Slightly more robust flip completion handling for < DCE-4
This reverts commit 1dcd32fb9c54334ec948a0f18174a748d6b14364.
The block size is indeed an equal match, so this can cause performance regressions.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If this happens (and it recently did), we free a structure while part of
it is still in use, which results in non-obvious crashes. The way it's
detached is not trivial (DRM core has to call the connector .destroy
callback and things must be torn down in the right order), so better
detect it and warn early.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All other amdgpu/dce_v* files have this call, it's only mysteriously
missing from dce_v11_0.c since the file was added and causes leaks.
Fixes: aaa36a976b ("drm/amdgpu: Add initial VI support")
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Successful sw_init() and hw_init() states are tracked, but not
late_init(). Various error paths may result in amdgpu_fini() being
called before .late init is done, so late_init needs to be tracked
to avoid unexpected or multiple .late_fini() calls.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is needed for proper VCE DPM on some APUs.
v2: fix the asic list
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Powerplay is no longer optional after the recently cleanups
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have the drm_display_info for storing information about the sink, so
let's move dvi_dual and max_tmds_clock in there.
v2: Deal with superfluous code shuffling
Document dvi_dual and max_tmds_clock too
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-5-git-send-email-ville.syrjala@linux.intel.com
We generally store clocks in kHz, so let's do that for the
HDMI max TMDS clock value as well. Less surpising.
v2: Deal with superfluous code shuffling
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-4-git-send-email-ville.syrjala@linux.intel.com
Some additional fixes for 4.9:
- The rest of Christian's GTT rework which fixes a long standing bug
in the GPUVM code among other things
- Changes to the pci shutdown callbacks for certain hypervisors
- Fix hpd interrupt storms on eDP panels which have the hpd interrupt
enabled by the bios
- misc cleanups and bug fixes
* 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (33 commits)
drm/radeon: always apply pci shutdown callbacks
drm/amdgpu: always apply pci shutdown callbacks (v2)
drm/amdgpu: improve VM PTE trace points
drm/amdgpu: fix GART_DEBUGFS define
drm/amdgpu: free userptrs even if GTT isn't bound
drm/amd/amdgpu: Various cleanups for DCEv6
drm/amdgpu: fix BO move offsets
drm/amdgpu: fix amdgpu_move_blit on 32bit systems
drm/amdgpu: fix gtt_mgr bo's offset
drm/amdgpu: fix initializing the VM BO shadow
drm/amdgpu: fix initializing the VM last eviction counter
drm/amdgpu: cleanup VM shadow BO unreferencing
drm/amdgpu: allocate GTT space for shadow VM page tables
drm/amdgpu: rename all rbo variable to abo v2
drm/amdgpu: remove unused member from struct amdgpu_bo
drm/amdgpu: add a custom GTT memory manager v2
drm/amdgpu/dce6: disable hpd on local panels
drm/amdgpu/dce8: disable hpd on local panels
drm/amdgpu/dce11: disable hpd on local panels
drm/amdgpu/dce10: disable hpd on local panels
...
We can't properly detect all hypervisors and we
need this to properly tear down the hardware.
v2: trivial warning fix
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use a separate one for the copy operation and
log all the interesting parameters.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Obviously missed during the rename.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes a memory leak since binding GTT only on demand.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's pretty pointless to get the offset first and then initialize it.
Should fix issues with the new GTT manager.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This bug seems to be present for a very long time.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to clear the shadows as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Close a very small window where something can go wrong.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unreference the shadow BOs in the error path as well and drop the NULL checks.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to access those with the system domain.
Fixes fallout from only allocating GTT space on demand.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just to cleanup some radeon leftovers.
sed -i "s/rbo/abo/g" drivers/gpu/drm/amd/amdgpu/*.c
sed -i "s/rbo/abo/g" drivers/gpu/drm/amd/amdgpu/*.h
v2: rebased
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used in a while.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only allocate address space when we really need it.
v2: fix a typo, add correct function description,
stop leaking the node in the error case.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we can get a hotplug interrupt storm when
we turn the panel off if hpd interrupts were enabled
by the bios.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=97471
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJX6H4uAAoJEHm+PkMAQRiG5sMH/3yzrMiUCSokdS+cvY+jgKAG
JS58JmRvBPz2mRaU3MRPBGRDeCz/Nc9LggL2ZcgM+E1ZYirlYyQfIED3lkqk5R07
kIN1wmb+kQhXyU4IY3fEX7joqyKC6zOy4DUChPkBQU0/0+VUmdVmcJvsuPlnMZtf
g95m0BdYTui+eDezASRqOEp3Lb5ONL4c3ao4yBP0LHF033ctj3VJQiyi5uERPZJ0
5e6Mo7Wxn78t9WqJLQAiEH46kTwT2plNlxf3XXqTenfIdbWhqE873HPGeSMa3VQV
VywXTpCpSPQsA8BYg66qIbebdKOhs9MOviHVfqDtwQlvwhjlBDya0gNHfI5fSy4=
=Y/L5
-----END PGP SIGNATURE-----
Merge tag 'v4.8-rc8' into drm-next
Linux 4.8-rc8
There was a lot of fallout in the imx/amdgpu/i915 drivers, so backmerge
it now to avoid troubles.
* tag 'v4.8-rc8': (1442 commits)
Linux 4.8-rc8
fault_in_multipages_readable() throws set-but-unused error
mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing
radix tree: fix sibling entry handling in radix_tree_descend()
radix tree test suite: Test radix_tree_replace_slot() for multiorder entries
fix memory leaks in tracing_buffers_splice_read()
tracing: Move mutex to protect against resetting of seq data
MIPS: Fix delay slot emulation count in debugfs
MIPS: SMP: Fix possibility of deadlock when bringing CPUs online
mm: delete unnecessary and unsafe init_tlb_ubc()
huge tmpfs: fix Committed_AS leak
shmem: fix tmpfs to handle the huge= option properly
blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx
MIPS: Fix pre-r6 emulation FPU initialisation
arm64: kgdb: handle read-only text / modules
arm64: Call numa_store_cpu_info() earlier.
locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text
nvme-rdma: only clear queue flags after successful connect
i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended
perf/core: Limit matching exclusive events to one PMU
...
Last set of radeon and amdgpu changes for 4.9. This is
mostly just the powerplay cleanup for dGPUs. Beyond that,
just misc code cleanups and bug fixes.
* 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (49 commits)
drm/amd/amdgpu: Clean up afmt allocation in DCEv6. (v2)
drm/amd/amdgpu: Remove division from vblank_wait
drm/radeon/atif: Send a hotplug event when we get dgpu display request
drm/radeon/atpx: check for ATIF dGPU wake for display events support
drm/amdgpu/atif: Send a hotplug event when we get dgpu display request
drm/amdgpu/atpx: check for ATIF dGPU wake for display events support
drm/amdgpu: bump version for new vce packet support
drm/amdgpu/vce: allow the clock table packet
drm/amdgpu:cleanup virt related define
drm/amdgpu: use powerplay module for dgpu in Vi.
drm/amdgpu: set gfx clock gating for tonga/polaris.
drm/amdgpu: set system clock gating for tonga/polaris.
drm/amd/powerplay: export function to help to set cg by smu.
drm/amdgpu: avoid out of bounds access on array interrupt_status_offsets
drm/amdgpu: mark symbols static where possible
drm/amdgpu: remove unused functions
drm/amd/powerplay: Replace per-asic print_performance with generic
drm/radeon: narrow asic_init for virtualization
drm/amdgpu:add fw version entry to info
drm/amdgpu:determine if vPost is needed indeed
...
- more core cleanup patches to prep drm_file to be used for
kernel-internal contexts (David Herrmann)
- more split-up+docs for drm_crtc.c
- lots of small fixes and polish all over
* tag 'topic/drm-misc-2016-09-25' of git://anongit.freedesktop.org/drm-intel: (37 commits)
drm: bridge: analogix/dp: mark symbols static where possible
drm/bochs: mark bochs_connector_get_modes() static
drm/bridge: analogix_dp: Improve panel on time
drm/bridge: analogix_dp: Don't read EDID if panel present
drm/bridge: analogix_dp: Remove duplicated code
Revert "drm/i2c: tda998x: don't register the connector"
drm: Fix plane type uabi breakage
dma-buf/sync_file: free fences array in num_fences is 1
drm/i2c: tda998x: don't register the connector
drm: Don't swallow error codes in drm_dev_alloc()
drm: Distinguish no name from ENOMEM in set_unique()
drm: Remove dirty property from docs
drm/doc: Document color space handling
drm: Extract drm_color_mgmt.[hc]
drm/doc: Polish plane composition property docs
drm: Conslidate blending properties in drm_blend.[hc]
drm/doc: Polish for drm_plane.[hc]
drm: Extract drm_plane.[hc]
drm/tilcdc: Add atomic and crtc headers to crtc.c
drm: Fix typo in encoder docs
...
This is amdkfd's pull request for kernel 4.9. It contains a fix to a possible
infinite loop bug and a couple of other minor "cleaning" patches.
* tag 'drm-amdkfd-next-2016-09-19' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Pass 'struct queue_propertices' by reference
drm/amdkfd: Unify multiple calls to pr_debug() into one
drm/amdkfd: Fix possible infinite loop
drm/amdkfd: Reuse function to find a process through pasid
drm/amdkfd: Add some missing memset zero'ing in queue init func
drm/amdkfd: Tidy up kfd_generate_gpu_id() uint64_t bitshift unpack
We can use .num_rings for that.
Fixes: 6f0359ff73 ("vce3: add support for third vce ring")
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Right now it's possible to trigger fence_drv.fences[] dereference after
the array has been freed. While the real problem is elsewhere, this still
results in confusing errors that depend on how the freed memory was
reused (I've seen "kernel tried to execute NX-protected page"), it's
better to clear them and get NULL dereference so that it's obvious what's
going wrong.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is in symmetry to setup done in amdgpu_ring_init.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we will look at the wrong place in the IB when GART
mappings are split into smaller updates.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Tom StDenis <Tom.StDenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some code called by drm_crtc_force_disable_all() wants to wait for all
fences, so only do fence teardown after CRTCs are disabled.
Fixes: 84b89bdced ("drm/amdgpu: Turn off CRTCs on driver unload")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: minor build fix
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removes division from vblank_wait for DCE v6, v8,
and v10. Was already implemented for v11.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On PX systems, if the platform supports hotplug events ATIF while the
dGPU is powered down, handle the event and alert userspace.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some ATPX laptops implement special circuitry to generate
display hotplug events via ACPI when the dGPU is powered off.
Check if this is supported.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This packet allows the user mode driver to specify
the required performance for specific use cases.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
move virtual machine related structure to amdgpu_virt.h
easy for developer to maintain for virualization stuffs
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
delete non-pp code and files. It was just a temporary
solution and not support dynamic power management.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The check for an out of bound index into array interrupt_status_offsets
is off-by-one. Fix this and also don't compared to a hard coded array
size but use adev->mode_info.num_hpd instead.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We get 7 warnings when building kernel with W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1990:5: warning: no previous prototype for 'amdgpu_pre_soft_reset' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c:1548:5: warning: no previous prototype for 'amdgpu_connector_virtual_dpms' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c:1560:5: warning: no previous prototype for 'amdgpu_connector_virtual_set_property' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c:330:5: warning: no previous prototype for 'amdgpu_cs_list_validate' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/dce_virtual.c:98:6: warning: no previous prototype for 'dce_virtual_stop_mc_access' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/dce_virtual.c:130:6: warning: no previous prototype for 'dce_virtual_resume_mc_access' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/dce_virtual.c:136:6: warning: no previous prototype for 'dce_virtual_set_vga_render_state' [-Wmissing-prototypes]
In fact, all of the functions are only used in the file
in which they are declared and don't need a declaration,
but can be made static.
So this patch marks both functions with 'static'.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We get 2 warnings when building kernel with W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:146:5: warning: no previous prototype for 'pool_to_domain' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/cz_smc.c:104:5: warning: no previous prototype for 'cz_send_msg_to_smc_with_parameter_async' [-Wmissing-prototypes]
In fact, both functions are called by no one and not exported,
so this patch removes them.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace per-asic print_current_performance() functions with generic
that calls read_sensor. Tested on Tonga and Carrizo for aesthetics
and accuracy.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
More radeon and amdgpu changes for 4.9. Highlights:
- Initial SI support for amdgpu (controlled by a Kconfig option)
- misc ttm cleanups
- runtimepm fixes
- S3/S4 fixes
- power improvements
- lots of code cleanups and optimizations
* 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (151 commits)
drm/ttm: remove cpu_address member from ttm_tt
drm/radeon/radeon_device: remove unused function
drm/amdgpu: clean function declarations in amdgpu_ttm.c up
drm/amdgpu: use the new ring ib and dma frame size callbacks (v2)
drm/amdgpu/vce3: add ring callbacks for ib and dma frame size
drm/amdgpu/vce2: add ring callbacks for ib and dma frame size
drm/amdgpu/vce: add common ring callbacks for ib and dma frame size
drm/amdgpu/uvd6: add ring callbacks for ib and dma frame size
drm/amdgpu/uvd5: add ring callbacks for ib and dma frame size
drm/amdgpu/uvd4.2: add ring callbacks for ib and dma frame size
drm/amdgpu/sdma3: add ring callbacks for ib and dma frame size
drm/amdgpu/sdma2.4: add ring callbacks for ib and dma frame size
drm/amdgpu/cik_sdma: add ring callbacks for ib and dma frame size
drm/amdgpu/si_dma: add ring callbacks for ib and dma frame size
drm/amdgpu/gfx8: add ring callbacks for ib and dma frame size
drm/amdgpu/gfx7: add ring callbacks for ib and dma frame size
drm/amdgpu/gfx6: add ring callbacks for ib and dma frame size
drm/amdgpu/ring: add an interface to get dma frame and ib size
drm/amdgpu/sdma3: drop unused functions
drm/amdgpu/gfx6: drop gds_switch callback
...
1,Changes on virtualization detections
2,Don't load smu & mc firmware if using sr-iov bios
3,skip vPost for sriov & force vPost if dev pass-through
v2: agd: squash in Rays's fix for the missed SI case
v3: agd: squash in additional fixes for CIK, SI, cleanup
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(v2) Tidy'ed up read function.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to implement the raster configuration and harvested
configuration of gfx v8.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to implement the raster configuration and harvested
configuration of gfx v7.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to implement the raster configuration and harvested
configuration of gfx v6.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the loop predicating timeout parameter passed happens to
not be a multiple of 20 the unsigned integer will overflow and
the loop will become unbounded.
Signed-off-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Reported-by: Christian Inci <chris.pcguy.inci@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than using "struct file*", use "struct drm_file*" as tag VM tag for
BOs. This will pave the way for "struct drm_file*" without any "struct
file*" back-pointer.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160901124837.680-3-dh.herrmann@gmail.com
We get 2 warnings when building kernel with W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c:985:5: warning: no previous prototype for 'amdgpu_ttm_init' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c:1092:6: warning: no previous prototype for 'amdgpu_ttm_fini' [-Wmissing-prototypes]
In fact, both functions are declared in
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c, but should be declared in
a header file, thus can be recognized in other file.
So this patch moves the declarations into
drivers/gpu/drm/amd/amdgpu/amdgpu.h.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use them to more accurately determine the ring size required
for ib submission.
v2: drop extra alignment
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used to properly calculate space on the ring for ib submissions.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are not used yet.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GDS works differently on GFX6, plus the callback was
empty.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Missing for gfx6.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The compute functions just called the gfx functions, drop
the wrapper.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We switched the other asics, but missed this.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
no need to set cg for uvd/vce in late init.
As when ring test, uvd/vce's dpm will be enabled/disabled.
the cg will be set.
fix issue suspend when play video or encode, then resume back,
the clock will be bypassed on Polaris/Fiji.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jordan Lazare <Jordan.Lazare@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use an explicit limit when moving things around to
force address space allocation.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way the address space gets allocated immediately.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Doesn't make much sense to clear the GTT when it was never filled.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An invalid offset to be used by custom VRAM/GGT manager when we
don't have an offset for an BO.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to validate the offset to make sure that we don't write after the BO.
Additional to that a page should be enough and can make address space
handling much easier.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of keeping a bunch of potentially unused flags, just define
the start for private memory types and remove the rest.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ported from nouveau.
v2: re-enable runtime autosuspend in the error case
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
remnants of the port from radeon.
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We get a few warnings when building kernel with W=1:
drivers/gpu/drm/amd/amdgpu/cz_smc.c:51:5: warning: no previous prototype for 'cz_send_msg_to_smc_async' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/cz_smc.c:143:5: warning: no previous prototype for 'cz_write_smc_sram_dword' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/iceland_smc.c:124:6: warning: no previous prototype for 'iceland_start_smc' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:3926:6: warning: no previous prototype for 'gfx_v8_0_rlc_stop' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_job.c:94:6: warning: no previous prototype for 'amdgpu_job_free_cb' [-Wmissing-prototypes]
....
In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks these functions with 'static'.
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We get a few warnings when building kernel with W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_pll.c:113:6: warning: no previous prototype for 'amdgpu_pll_compute' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/cz_smc.c:38:10: warning: no previous prototype for 'cz_get_argument' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/cz_smc.c:302:5: warning: no previous prototype for 'cz_smu_start' [-Wmissing-prototypes]
....
In fact, these functions are declared in
drivers/gpu/drm/amd/amdgpu/atombios_i2c.h
drivers/gpu/drm/amd/amdgpu/amdgpu_pll.h
drivers/gpu/drm/amd/amdgpu/cz_dpm.h
drivers/gpu/drm/amd/amdgpu/vi_dpm.h.
So this patch adds missing header dependencies.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use error label to decrease global item unref and make codes more
readable.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't really need the GTT table any more most of the time. So bind it
only on demand.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we run into problems on 32bit systems with more than 4GB GART.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
for gfx8, use CONTEXT_CONTROL package to dynamically
skip preamble CEIB and other load_xxx command in sequence.
v2:
support GFX7 as well.
remove cntxcntl in compute ring funcs because CPC doesn't
support this packet.
v3: fix reduntant judgement in cntxcntl.
v4: some cleanups, don't change cs_submit()
v5: keep old MESA supported & bump up KMS version.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Ack-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Without this, we were only ever using the first 256MB of VRAM.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97593
Tested-by: Konstantin A. Lepikhov <lakostis@altlinux.org>
Tested-by: Arek Ruśniak <arek.rusi@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Free the BO allocated by amdgpu_bo_create_kernel()
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix a couple of spots where errors were not returned as
well as add some error messages to
si_patch_dependency_based_on_leakage() which were not being
read.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up the codes to move the release handles into fail labels.
v2: squash in Christian's regression fix
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function gfx_v6_0_get_cu_info() was taking the
grbm_idx_mutex which was then taken by a dependent
function gfx_v6_0_get_cu_active_bitmap().
This patch removes the select from the parent function
to avoid the double lock.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the kernel log messaging more consistent and use the
dev_*() functions instead of a mix of DRM_*() and printk().
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The tahiti_le structure is not currently used. Comment it out
to avoid warnings.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As well as merge SMC clock functions into one to reduce LOC.
v2: Fix swapped ck enable bit
bug: https://bugs.freedesktop.org/show_bug.cgi?id=97801
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace 8 spaces with tabs, correct {} braces, etc.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hoist common assignments out of cases.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow calling fini even if ps array is not allocated.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
reset the asic if adapter is not powerdown when doing freeze()
thaw() and restore(), in order to get a valid state of adapter.
v2: squash in warning fix from Rex
Signed-off-by: JimQu <Jim.Qu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested By: Shawn Starr <shawn.starr@rogers.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
job->ctx actually is a fence_context of the entity
it belongs to, naming it as ctx is too vague, and
we'll need add amdgpu_ctx into the job structure
later.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sync switch buffer scheme with windows kmd for gfx v8,
step2:
Insert 128NOP after&before VM flush to prevent CE vm fault.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds VCE VM mode support from Stoney onwards. Session tracking
is an open issue, yet to be supported.
v2: Fixed warnings from checkpatch.pl
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Various whitespace and logical simplifications for gfx6.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing lock around SE/SH/INSTANCE selections.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As last resort try to evict BOs from the current working set into other
memory domains. This effectively prevents command submission failures when
VM page tables have been swapped out.
v2: fix typos
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All other errors can't be fixed by using a different memory domain.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Normally on shutdown or reboot we don't care about necessarily
making sure the hw is in a good state because the system is about
to be powered down or reset. However, after a shutdown or reboot
in a VM, it's best to tear down the hw properly otherwise there
can be problems with the next VM use.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Missed this case previously. No need to do anything if the
device is already off. runtime pm will handle it.
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sbios always powers up the dGPU on resume.
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The mqd is only used on CI and newer.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2:
a. gart recovery should be ahead of ring test.
b. rename to amdgpu_ttm_recover_gart
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2:
spin lock instead of mutex for gtt list
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: corrected register offset shift
v3: rebase fixes
v4: fix firmware paths
add SI smc firmware versions for sysfs dump
remove unused function forward define
fix the tahiti specific value of DEEP_SLEEP_CLK_SEL field
fix to miss adding thermal controller
use vram_type instead of checking mem_gddr5 flag
fix incorrect index of CG_FFCT_0 register
fix incorrect reading method at si_get_current_pcie_speed
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: renamed _atom_ to _atombios_ for consistency
added ulClockParams to _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3 and
_COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5 to avoid build break
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v3: guard doorbell_fini as well
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we may miss errors.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
unhalt Instrction Fetch Unit after all rings are inited.
Signed-off-by: JimQu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
SDMA could be fail in the thaw() and restore() processes, do software reset
if each SDMA engine is busy.
Signed-off-by: JimQu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds pcie port read/write entry, because it will be also
used on si dpm part.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v5: rebase fixes
v6: add mgcg arrays
v7: rebase fixes
v8: rebase fixes
v9: add get_disabled_bios(), make get_xclk static
v10: fix oland and hainan asic specific handle at si_program_aspm
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v4: rebase fixes
v5: use the generic nop fill
v6: rebase fixes
v7: rebase fixes
copy count fixes from Jonathan
general cleanup
add fill buffer implementation
v8: adapt write_pte and copy_pte to latest changes
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v5: rebase fixes
v6: rebase fixes
v7: rebase fixes
fix tile reg offset as noticed by Jonathan
Drop some debugging remnants
v8: add gfx v6 firmware versions for sysfs dump
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v3: white space fixes
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v4: rebase fixups
v5: more fixes based on dce8 code
v6: squash in dmif offset fix
v7: rebase fixups
v8: rebase fixups, drop some debugging remnants
v9: fix BE build
v10: include Marek's tiling fixes, add support for
page_flip_target, set MASTER_UDPATE_MODE=0,
fix cursor
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v3: rebase fixups
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v4: rebase fixups
v5: rebase fixups
v5: rebase fixups
v6: rebase fixups for gart size changes
v7: add gmc v6 firmware versions for sysfs dump
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sync switch buffer scheme with windows kmd for gfx v8,
step1: append a switch_buffer to the end of CS
v2:rebase on latest staging
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The old mechanism used a per-submission limit that didn't take previous
submissions within the same time frame into account. It also filled VRAM
slowly when VRAM usage dropped due to a big eviction or buffer deallocation.
This new method establishes a configurable MBps limit that is obeyed when
VRAM usage is very high. When VRAM usage is not very high, it gives
the driver the freedom to fill it quickly. The result is more consistent
performance.
It can't keep the BO move rate low if lots of evictions are happening due
to VRAM fragmentation, or if a big buffer is being migrated.
The amdgpu.moverate parameter can be used to set a non-default limit.
Measurements can be done to find out which amdgpu.moverate setting gives
the best results.
Mainly APUs and cards with small VRAM will benefit from this. For F1 2015,
anything with 2 GB VRAM or less will benefit.
Some benchmark results - F1 2015 (Tonga 2GB):
Limit MinFPS AvgFPS
Old code: 14 32.6
128 MB/s: 28 41
64 MB/s: 15.5 43
32 MB/s: 28.7 43.4
8 MB/s: 27.8 44.4
8 MB/s: 21.9 42.8 (different run)
Random drops in Min FPS can still occur (due to fragmented VRAM?), but
the average FPS is much better. 8 MB/s is probably a good limit for this
game & the current VRAM management. The random FPS drops are still to be
tackled.
v2: use a spinlock
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Various minor formatting changes.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If init fails free up any allocated memory.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If one of the entries fails to be allocated then free
all of the previous entries before freeing the array which
holds their pointers.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
uvd dpm will be controlled by uvd.
dpm just disable uvd dpm in case of suspend when play video.
due to the new logic of uvd_begin_use/end_use,
if disable uvd dpm in late init, will have no chance to
enable uvd dpm after resume until play video again.
Change-Id: I70e3d7efe63edad37f26e6c5ea089da1135c0ab5
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
delete the members not needed when amd_powerplay_init.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sub_vendor_id in cgs interface.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix issue that encode test failed on the second time when
vce dpm enabled on tonga.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix issue after vce encode, the eclk stay high.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not of much use at the moment (we don't really use
the second ring either), but may be useful later.
Reviewed-by: JimQu <Jim.Qu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than using a hardcoded value. This allows
different versions to expose more or less rings.
No functional change.
Reviewed-by: JimQu <Jim.Qu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The old names were dragged over from radeon. The new ones
better match the naming conventions used in the driver.
No functional change.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
First drm-next pull for radeon and amdgpu for 4.9. Highlights:
- powerplay support for iceland asics
- improved GPU reset (both full asic and per block)
- UVD and VCE powergating for CZ and ST
- VCE clockgating for CZ and ST
- Support for pre-initialized (e.g., zeroed) vram buffers
- ttm cleanups
- virtual display support
- core and radeon/amdgpu support for page_flip_target
- lots of bug fixes and clean ups
* 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (171 commits)
drm/amdgpu: use memcpy_toio for VCE firmware upload
drm/amdgpu: use memcpy_to/fromio for UVD fw upload
drm/amd/powerplay: delete useless code in iceland_hwmgr.c.
drm/radeon: switch UVD code to use UVD_NO_OP for padding
drm/amdgpu: switch UVD code to use UVD_NO_OP for padding
drm/radeon: add support for UVD_NO_OP register
drm/amdgpu: add support for UVD_NO_OP register
drm/amdgpu: fix VCE ib alignment value
drm/amdgpu: fix IB alignment for UVD
drm/amd/amdgpu: Print ring name in amdgpu_ib_schedule()
drm/radeon: remove dead code, si_mc_load_microcode (v2)
drm/radeon/cik: remove dead code (v2)
drm/amd/powerplay: avoid NULL dereference, cz_hwmgr.c
drm/amd/powerplay: avoid NULL pointer dereference
drm/amdgpu/gmc8: remove dead code (v2)
drm/amdgpu/gmc7: remove dead code (v2)
drm/amdgpu: Fix indentation in dce_v8_0_audio_write_sad_regs()
drm/amdgpu: Use correct mask in dce_v8_0_afmt_setmode() and fix comment typos.
drm/amdgpu: cleanup amdgpu_vm_bo_update params
drm/amdgpu: stop adding dummy entry in amdgpu_ttm_placement_init
...
Try to be clean here, even when it's a noop on x86.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also use the firmware size from the header instead of calculating it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace packet2's with packet0 writes to UVD_NO_OP. The
value written to UVD_NO_OP does not matter.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Writes to this register are the preferred way to do NOPs.
Bump the driver version as well.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
According to the hw team, it should be 16, not 8.
Cc: Peter Fang <peter.fang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
When looking up the connector type make sure the index
is valid. Avoids a later crash if we read past the end
of the array.
Workaround for bug:
https://bugs.freedesktop.org/show_bug.cgi?id=97460
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Adding a BO can make it the insertion point for larger sizes as well.
v2: add a comment about the guard structure.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If the ring isn't ready lets print out which ring name
to help debugging.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In an if block for (running == 0) running cannot be non-zero.
v2: agd: remove unused variable
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In an if block for (running == 0) running cannot be non-zero.
v2: agd: remove unused variable
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixed indentation for readability.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We were using the same mask twice. Looking at radeon, it seems
we should be using HDMI_AVI_INFO_CONT instead as the second mask.
Being there, fix typos in comments and improved readability.
I haven't looked at other DCEs, the mask may also be wrong for them.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make it more obvious what we are doing here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AMDGPU_GEM_CREATE_NO_CPU_ACCESS and AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED are
obviously mutual exclusive. So stop adding a dummy entry without effect when
both are specified.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make it more clear what this function does. No intendet functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding a BO can make it the insertion point for larger sizes as well.
v2: add a comment about the guard structure.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For profiling.
v2: really bump the minor version
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2:
1. don't directly submit to many jobs at the same time.
2. delete unrelated printk.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2:
1. use mutex instead of spinlock for shadow list, since its process could
sleep.
2. move list_del to bo destroy phase.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2:
move shadow parameter to amdgpu_pte_update_params.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: minutemaidpark@hotmail.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2:
Checking if shadow is valid.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use shadow flag to judge which direction to sync.
V2:
Don't need bo pin, so remove it.
V3:
1. Split to two functions, one is backup_to_shadow, another is
restore_from_shadow.
2. Clean up previous shadow direction difinitions.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2:
add checking if need backup in amdgpu_bo_create.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Phenomenon: software hang when device resume back, read UVD fence is 0xffffffff
and read pcie pid is 0xffff.
The issue is caused by VCE reset when update cg setting. according to HW programming
guide, adjust update VCE cg sequence.
The patch apply to VCE2.0.
Signed-off-by: JimQu <Jim.Qu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
abort if the bo is pined to other domain already
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Typo in checking the return code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This bug seems to be present for a very long time.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Adds family and external_rev_id to config data
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, by hardcoding 0 for the vblank counter and
-EINVAL for the scanout position return value, we signal to the core DRM code that there are
no hardware counters we can use for these.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds rev_id as well as cg/pg flags to help debug runtime.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just a few 80 chars problems.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remember what function to call while planning the commands instead
of figuring it our later on.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It doesn't make much sense to create bigger commands first which we then need
to split into smaller one again. Just make sure the commands we create aren't
to big in the first place.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't need the gart mapping handling here any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Write the PTEs at the end of the IB instead of directly into the SDMA commands.
This can save quite some CPU cycles building the entries.
This doesn't change the DW estimation because PTEs where embedded into the IB
before as well. It just moves them to the end of the IB.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Indicate if need to sync between bo and shadow, where sync to where.
V2:
Rename to backup_shadow
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The pd/pt shadow bo will be used to backup page table, when gpu reset
happens, we can restore the page table by them.
V2:
Free shadow bo.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
shadow bo is the shadow of a bo, which is always in GTT,
which can be used to backup the original bo.
V2:
reference shadow parent, shadow bo will be freed by who allocted him.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GART aperture size can be bigger than 4GB. Therefore the offset
used in amdgpu_gart_bind and amdgpu_gart_unbind must be 64-bit.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
[danvet: Clarify that the returned pointer must be freed with
kfree().]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- more fence destaging and cleanup (Gustavo&Sumit)
- DRIVER_LEGACY to untangle from DRIVER_MODESET
- drm_mm refactor (Chris)
- fbdev-less compile fies
- clipped plane src/dst rects (Ville)
- + a few mediatek patches that build on top of that (Bibby+Daniel)
- small stuff all over really
* tag 'topic/drm-misc-2016-08-12' of git://anongit.freedesktop.org/drm-intel: (43 commits)
dma-buf/fence: kerneldoc: remove spurious section header
dma-buf/fence: kerneldoc: remove unused struct members
Revert "gpu: drm: omapdrm: dss-of: add missing of_node_put after calling of_parse_phandle"
drm: Protect fb_defio in drivers with CONFIG_KMS_FBDEV_EMULATION
drm/radeon|amgpu: Make fbdev emulation optional
drm/vmwgfx: select CONFIG_FB
drm: Remove superflous linux/fb.h includes
drm/fb-helper: Add a dummy remove_conflicting_framebuffers
dma-buf/sync_file: only enable fence signalling on poll()
Documentation: add doc for sync_file_get_fence()
dma-buf/sync_file: add sync_file_get_fence()
dma-buf/sync_file: refactor fence storage in struct sync_file
dma-buf/fence-array: add fence_is_array()
drm/dp_helper: Rate limit timeout errors from drm_dp_i2c_do_msg()
drm/dp_helper: Print first error received on failure in drm_dp_dpcd_access()
drm: Add ratelimited versions of the DRM_DEBUG* macros
drm: Make sure drm_vblank_no_hw_counter isn't abused
drm/mediatek: Fix mtk_atomic_complete for runtime_pm
drm/mediatek: plane: Use FB's format's cpp to compute x offset
drm/mediatek: plane: Merge mtk_plane_enable into mtk_plane_atomic_update
...
Lots of drivers don't properly compile without this when CONFIG_FB=n.
It's kinda a hack, but since CONFIG_FB doesn't stub any fucntions when
it's disabled I think it makes sense to add it to drm_fb_helper.h.
Long term we probably need to rethink all the logic to unload firmware
framebuffer drivers, at least if we want to be able to move away from
CONFIG_FB and fbcon.
v2: Unfortunately just stubbing out remove_conflicting_framebuffers in
drm_fb_helper.h upset gcc about static vs. non-static declarations, so
a new wrapper it needs to be. Means more churn :(
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: tomi.valkeinen@ti.com
Cc: dh.herrmann@gmail.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-2-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the previous change, it's safe to let page flips take effect
anytime during a vertical blank period.
This can avoid delaying a flip by a frame in some cases where we get to
amdgpu_flip_work_func -> adev->mode_info.funcs->page_flip during a
vertical blank period.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now we can program a flip during a vertical blank period, if it's the
one targeted by the flip (or a later one). This allows simplifying
amdgpu_flip_work_func considerably.
agd: update dce_virtual.c as well.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We align to 64KB, but when userspace aligns even more we can easily use more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can add the fragment params before we split the update for the page tables.
That should save a few CPU cycles for larger updates.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to carry that forward as a separate parameter.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Well those are actually page table entry parameters.
This also makes the variable names used a bit shorter.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can actually do way more than just the 64KB we currently used as default.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used for a long time.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces a new macro WREG32_FIELD which is used
to write to a register with a new value in a field. It's designed
to replace the pattern:
tmp = RREG32(mmFoo);
tmp &= ~REG__FIELD_MASK;
tmp |= new_value << REG__FIELD__SHIFT;
WREG32(mmFoo, tmp)
with:
WREG32_FIELD(Foo, FIELD, new_value);
Unlike WREG32_P() it understands offsets/masks and doesn't
require the caller to shift the value (or mask properly).
It's applied where suitable in the gfx_v8_0.c driver to start
with.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix various whitespace issues in gfx v8 driver.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, as there may be multiple GPUs,
for user could choose whiche GPU need to enable this feature, change
the type of virtual_display from int to char*. The variable will be set
like this virtual_display="xxxx:xx:xx.x;xxxx:xx:xx.x;".
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fence_put was called on an uninitialized variable.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jay Cornwall <jay@jcornwall.me>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, if user set the option "amdgpu.virtual_display=1"
when load amdgpu.ko. Then need to set the ip_blocks with virtual display ip
blocks. And when enable virtual display, the amdgpu_dal need to be set to zero.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, define on variable in amdgpu.ko. When want to
enable virtual display feature, need set the option "amdgpu.virtual_display=1".
And then disable vga render and crtc if have DCE engine.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, define virtual display ip blocks, and set
dce_virtual_ip_funcs to DCE block.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, add one connector type in amdgpu_connector_add.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, as there is no dce engine, so no pageflip irq
generated. So directly call pageflip irq funtion when received vysn interrupt.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, use the software timer to
simulate the vsync interrupt.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, when the GPU has DCE engine, need to disable
the VGA render and CRTC, or it will hang when initialize GMC.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, when the GPU has DCE engine, need to disable
the VGA render and CRTC, or it will hang when initialize GMC. So first detect
whether the GPU has DCE engine.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, initialize dce_virtual_crtc_funcs.
v2: agd: rebase on upstream
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, initialize dce_virtual_crtc_helper_funcs.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, initialize dce_virtual_crtc_irq_funcs,
dce_virtual_pageflip_irq_funcs. As it has no dce engine, so the
pageflip interrupt won't be generated, and the vsync interrupt will
be generated by smu's periodic timer or software timer which will
be implemented later.
v2: agd: rebase on upstream
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, initialize dce_virtual_display_funcs,
which will be used in function dce_virtual_set_display_funcs.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, first need to initialize dce_virtual_ip_funcs,
which will be used when set ip blocks.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For virtual display feature, add virtual connector and encoder macros.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When this code was written, we didn't retry DP aux transactions on any
error, which required retrying important transactions like this in
individual drivers. Since that's no longer the case, retrying here is
not necessary. As well, we retry any aux transaction on any error 32
times. 7 * 32 = 224, which means this loop causes us to retry grabbing
the dpcd 224 times. This is definitely far more then we actually need to
do.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since it's normal for DRM to retry our aux transaction helpers multiple
times in a row, up to 32 times for each attempted transaction, we're
making a lot of noise that is no longer necessary now that DRM will just
print the return code we give it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes hangs under memory pressure, e.g. running the piglit test
tex3d-maxsize concurrently with other tests.
Fixes: 17d33bc9d6 ("drm/ttm: drop waiting for idle in ttm_bo_evict.")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable powerplay as default on Carrizo and Stoney. And it can be
disabled with amdgpu.powerplay=0.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Cc: Rex Zhu <Rex.Zhu@amd.com>
Cc: Flora Cui <Flora.Cui@amd.com>
Cc: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a workaround to let VCE soft reset work.
RB1_BUSY bit is always set, so remove its checking now, and we
will depend on RB0_BUSY currently.
After we find the root cause of RB1_BUSY, we can add it back.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Partially undo changes made by commit:
drm/amd/amdgpu: don't track state in UVD clockgating
To keep bypass even if CG flags are not set.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's handled by DPM/PP properly.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CG was being enabled in reverse sense from dpm/powerplay.
Also fix the default CLK_EN signal to enable all of the blocks.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will make clock and power gated when no block decoded, for example
when paused during the playback.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's useful for debugging.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2: fix the return value for fill failure and validate bo before
filling data
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
so that bo could be set to some pattern
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This got leftover somehow when I cleaned this up.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's already covered by the default case, but add it for
consistency.
Reviewed-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like this got missed when we ported the code from radeon.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Enable the PG_EN bit just before the SMU would be tasked
with the PG transition.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There's no need to track CG state anymore.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is handled properly by both DPM and PP externally.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds support for PM locks around access to registers that might
have race conditions on PG transistions.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds a mutex lock for both DPM/PP around the changes in
power gating state so that userspace can poll registers without
a race condition on power state.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's able to enable iceland powerplay manually via the module
parameter. The default state is disabled.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Saves us quite a bunch of code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Saves us quite a bunch of code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Saves us some code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Warn when we try to get the address and the BO isn't locked or reserved.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They can't move anyway, but just to be clean here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We often allocate, pin and map things at the same time in the kernel.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check gpu status first, if MC/VMC/DISPLAY hang, directly triger full reset.
If engine hangs, then triger engine soft reset, if soft reset fails, will
fallback to full reset.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It will be used before soft_reset to do some preparing work for reset.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is used to identify if the ip block is hang.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A few fixes for amdgpu and ttm for 4.8
- fix a ttm regression caused by the new pipelining code
- fixes for mullins on amdgpu
- updated golden settings for amdgpu
* 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux:
drm/ttm: Wait for a BO to become idle before unbinding it from GTT
drm/amdgpu: update golden setting of polaris10
drm/amdgpu: update golden setting of stoney
drm/amdgpu: update golden setting of polaris11
drm/amdgpu: update golden setting of carrizo
drm/amdgpu: update golden setting of iceland
drm/amd/amdgpu: change pptable output format from ASCII to binary
drm/amdgpu/ci: add mullins to default case for smc ucode
drm/amdgpu/gmc7: add missing mullins case
Fixes hangs under memory pressure, e.g. running the piglit test
tex3d-maxsize concurrently with other tests.
Fixes: 17d33bc9d6 ("drm/ttm: drop waiting for idle in ttm_bo_evict.")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge drm updates from Dave Airlie:
"This is the main drm pull request for 4.8.
I'm down with a cold at the moment so hopefully this isn't in too bad
a state, I finished pulling stuff last week mostly (nouveau fixes just
went in today), so only this message should be influenced by illness.
Apologies to anyone who's major feature I missed :-)
Core:
Lockless GEM BO freeing
Non-blocking atomic work
Documentation changes (rst/sphinx)
Prep for new fencing changes
Simple display helpers
Master/auth changes
Register/unregister rework
Loads of trivial patches/fixes.
New stuff:
ARM Mali display driver (not the 3D chip)
sii902x RGB->HDMI bridge
Panel:
Support for new panels
Improved backlight support
Bridge:
Convert ADV7511 to bridge driver
ADV7533 support
TC358767 (DSI/DPI to eDP) encoder chip support
i915:
BXT support enabled by default
GVT-g infrastructure
GuC command submission and fixes
BXT workarounds
SKL/BKL workarounds
Demidlayering device registration
Thundering herd fixes
Missing pci ids
Atomic updates
amdgpu/radeon:
ATPX improvements for better dGPU power control on PX systems
New power features for CZ/BR/ST
Pipelined BO moves and evictions in TTM
GPU scheduler improvements
GPU reset improvements
Overclocking on dGPUs with amdgpu
Polaris powermanagement enabled
nouveau:
GK20A/GM20B volt and clock improvements.
Initial support for GP100/GP104 GPUs, GP104 will not yet support
acceleration due to NVIDIA having not released firmware for them as of yet.
exynos:
Exynos5433 SoC with IOMMU support.
vc4:
Shader validation for branching
imx-drm:
Atomic mode setting conversion
Reworked DMFC FIFO allocation
External bridge support
analogix-dp:
RK3399 eDP support
Lots of fixes.
rockchip:
Lots of small fixes.
msm:
DT bindings cleanups
Shrinker and madvise support
ASoC HDMI codec support
tegra:
Host1x driver cleanups
SOR reworking for DP support
Runtime PM support
omapdrm:
PLL enhancements
Header refactoring
Gamma table support
arcgpu:
Simulator support
virtio-gpu:
Atomic modesetting fixes.
rcar-du:
Misc fixes.
mediatek:
MT8173 HDMI support
sti:
ASOC HDMI codec support
Minor fixes
fsl-dcu:
Suspend/resume support
Bridge support
amdkfd:
Minor fixes.
etnaviv:
Enable GPU clock gating
hisilicon:
Vblank and other fixes"
* tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits)
drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup
drm/nouveau/acpi: fix lockup with PCIe runtime PM
drm/nouveau/acpi: check for function 0x1B before using it
drm/nouveau/acpi: return supported DSM functions
drm/nouveau/acpi: ensure matching ACPI handle and supported functions
drm/nouveau/fbcon: fix font width not divisible by 8
drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events
drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce
drm/amdgpu: add query device id and revision id into system info entry at CGS
drm/amdgpu: add new definition in bif header
drm/amd/powerplay: rename smum header guards
drm/amdgpu: enable UVD context buffer for older HW
drm/amdgpu: fix default UVD context size
drm/amdgpu: fix incorrect type of info_id
drm/amdgpu: make amdgpu_cgs_call_acpi_method as static
drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build
drm/amdgpu: enable UVD VM only on polaris
drm/amdgpu: increase timeout of IB test
drm/amdgpu: add destroy session when generate VCE destroy msg.
drm/amd: fix deadlock of job_list_lock V2
...
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's already covered by the default case, but add it for
consistency.
Reviewed-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like this got missed when we ported the code from radeon.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This patch adds device id and revision into system info entry at CGS,
it's able to get PCI device id and revision id from amdgpu, it might
get more info in future.
PCI device id will be also used on powerplay part at current.
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch renames the smum header guards to align with the file name.
Reported-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Supported starting on certain FW versions.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Context buffers should be denied by default, not allowed.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stoney support it, but doesn't has unlimited session support.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
we should give enough time to IB test.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Mao <David.Mao@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will make sure all the submissions from different contexts gets
finished, and then we close the session and free up the handles.
This will fix the issue that session clean-up is not get done properly,
when with the command `kill -9'
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10ms should be enough for now.
v2: fix some typos in CIK code
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since we now raise the clocks from begin_use() we don't need
a separate function for each hw generation any more.
v2: remove unintentional lowering of the UVD clocks, fix typos for CIK hw.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes turning power and clock on when it is actually needed.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes turning power and clock on when it is actually needed.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For manual UVD/VCE power and clock gating.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was never used as far as I can see.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit <2ded8c7f04825bc5cde2624f6aa83f1ff62672c0>
As we enabled bypass mode for uvd on polaris10 when clockgating.
so no need to set uvd clock manually.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König<christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to check on Polaris if UVD session context is allowed or not.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Starting with Stoney we support running UVD in VM mode as well.
v2: rebased, only enable on Polaris for now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Indicate successful function execution only at the end.
Thus omit initialisation for the variable "result" at the beginning.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable "argument" will be set to an appropriate value a bit later.
Thus omit the explicit initialisation at the beginning.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The local variable "func_no" was assigned a value at two places.
But it was not read within this function. Thus delete it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The kfree() function was called in one case by the
amdgpu_cgs_acpi_eval_object() function during error handling
even if the passed variable "obj" contained a null pointer.
* Adjust jump targets according to the Linux coding style convention.
* Delete unnecessary initialisations for the variables "obj"
and "params" then.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The drm_gem_object_unreference_unlocked() function tests whether
its argument is NULL and then returns immediately.
Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found-by: Coccinelle
Signed-off-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found-by: Coccinelle
Signed-off-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found-by: Coccinelle
Signed-off-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Found-by: Coccinelle
Signed-off-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just about all of amdgpu's connector probing functions try to acquire
runtime PM refs. If we try to do this in the context of
amdgpu_resume_kms by calling drm_helper_hpd_irq_event(), we end up
deadlocking the system.
Since we're guaranteed to be holding the spinlock for RPM in
amdgpu_resume_kms, and we already know the GPU is in working order, we
need to prevent the RPM helpers from trying to run during the initial
connector reprobe on resume.
There's a couple of solutions I've explored for fixing this, but this
one by far seems to be the simplest and most reliable (plus I'm pretty
sure that's what disable_depth is there for anyway).
Reproduction recipe:
- Get any laptop dual GPUs using PRIME
- Make sure runtime PM is enabled for amdgpu
- Boot the machine
- If the machine managed to boot without hanging, switch out of X to
another VT. This should definitely cause X to hang infinitely.
Changes since v1:
- add appropriate #ifdef checks for CONFIG_PM. This is not very
useful, but it appears some kernel test suites test compiling amdgpu
with CONFIG_PM disabled, which results in this patch breaking the builds
if we don't include this #ifdef
Cc: stable@vger.kernel.org
Cc: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we do it at enable time, it's too late for the feature
checks.
v2: drop .init setting as per Peter's comments
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Peter Wu <peter@lekensteyn.nl>
Some of the checks didn't handle frev 2 tables properly.
amdgpu doesn't support any tables pre-frev 2, so drop
the checks.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
A few more patches for 4.8. Mostly bug fixes and some prep work
for iceland powerplay support. I have a couple polaris patches and
Edward's misc cleanups that require a merge with Linus'. I don't know
if you are planning a merge anytime soon.
[airlied: fixed up endian vs 32-bit change in ppatomctrl]
* 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux: (26 commits)
drm/amdgpu: comment out unused defaults_bonaire_pro static const structures to fix the build
drm/amdgpu: temporary comment out unused static const structures to fix the build
drm/amdgpu: S3 resume fail on Polaris10
drm/amd/powerplay: add pp_tables_get_response_times function in process pptables
drm/amd/powerplay: fix the incorrect return value
drm/amd/powerplay: add atomctrl_get_voltage_evv function in ppatomctrl
drm/amdgpu: add new definitions into ppsmc.h for iceland
drm/amd/powerplay: add SMU register macro for future use
drm/amdgpu: add ucode_start_address into cgs_firmware_info
drm/amdgpu: no need load microcode at sdma if powerplay is enabled
drm/amdgpu: rename smumgr to smum for dpm
drm/amdgpu: disable GFX PG on CZ/BR/ST
drivers: gpu: drm: amd: powerplay: hwmgr: Remove unused variable
drm/amdgpu: return -ENOSPC when running out of UVD handles
drm/amdgpu: trace need_flush in grab_vm as well
drm/amdgpu: always signal all fences
drm/amdgpu: check flush fence context instead of same ring v2
drm/radeon: support backlight control for UNIPHY3
drm/amdgpu: support backlight control for UNIPHY3
drm/amdgpu: remove usec timeout loop from IB tests
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXlRXSAAoJEHm+PkMAQRiGG/gH/0Z8O4zWOsrwO+X1mRToRDBH
joFOjAmCVe83T1VpF5LYNB+9+owL/dEDt6+ZIswnhH7AfQPjs4RqwS4PcuMbCDVO
+mDm0PmfcKaYcQZrB2Z2OwIzRNnfCTVcsDPhIHwuIHk0m4z/xuGZonD8KoAj0+tO
3yJF6sbE1KubDVjOb+lmZZSP3cXA0pDXrNhkYhE4Tsr8fiihGjeXSNJ8t2zPLjxo
W3MPqo0rzDvQsOwoF4TWHHagVaFSJlhLBBgqu33fI7uO3jtfQD2G8wG68JCND1j3
qbMoBfTLFV/yQmSIJUt0Wv1axaCcwnjpweEB35A/GEeZ0mNB1rDdoBeI1eKEQkc=
=DGFC
-----END PGP SIGNATURE-----
Backmerge tag 'v4.7' into drm-next
Linux 4.7
As requested by Daniel Vetter as the conflicts were getting messy.
* pm-core:
PM / runtime: Asynchronous "idle" in pm_runtime_allow()
PM / runtime: print error when activating a child to unactive parent
* pm-clk:
PM / clk: Add support for adding a specific clock from device-tree
PM / clk: export symbols for existing pm_clk_<...> API fcns
* pm-domains:
PM / Domains: Convert pm_genpd_init() to return an error code
PM / Domains: Stop/start devices during system PM suspend/resume in genpd
PM / Domains: Allow runtime PM during system PM phases
PM / Runtime: Avoid resuming devices again in pm_runtime_force_resume()
PM / Domains: Remove redundant pm_request_idle() call in genpd
PM / Domains: Remove redundant wrapper functions for system PM
PM / Domains: Allow genpd to power on during system PM phases
* pm-pci:
PCI / PM: check all fields in pci_set_platform_pm()
fix the build
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sometimes, driver can not return from fence waiting when doing VCE ring
ib test. The issue is a asic special and random issue. so adjust VCE suspend
and resume sequence.
Signed-off-by: JimQu <Jim.Qu@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ucode_start_address would be used on powerplay of iceland.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA firmware will be loaded by SMU manager if powerplay is enabled.
So it needn't load at SDMA.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename smumgr.h to smum.h, because smum.h is to align with the dpm of
other chips and we will use "iceland_smumgr" at powerplay in following
patches.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Still some stability issues under certain workloads.
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I recovered dri-devel backlog from my vacation, more misc stuff:
- of_put_node fixes from Peter Chen (not all yet)
- more patches from Gustavo to use kms-native drm_crtc_vblank_* funcs
- docs sphinxification from Lukas Wunner
- bunch of fixes all over from Dan Carpenter
- more follow up work from Chris register/unregister rework in various
places
- vgem dma-buf export (for writing testcases)
- small things all over from tons of different people
* tag 'topic/drm-misc-2016-07-14' of git://anongit.freedesktop.org/drm-intel: (52 commits)
drm: Don't overwrite user ioctl arg unless requested
dma-buf/sync_file: improve Kconfig description for Sync Files
MAINTAINERS: add entry for the Sync File Framework
drm: Resurrect atomic rmfb code
drm/vgem: Use PAGE_KERNEL in place of x86-specific PAGE_KERNEL_IO
qxl: silence uninitialized variable warning
qxl: check for kmap failures
vga_switcheroo: Sphinxify docs
drm: Restore double clflush on the last partial cacheline
gpu: drm: rockchip_drm_drv: add missing of_node_put after calling of_parse_phandle
gpu: drm: sti_vtg: add missing of_node_put after calling of_parse_phandle
gpu: drm: sti_hqvdp: add missing of_node_put after calling of_parse_phandle
gpu: drm: sti_vdo: add missing of_node_put after calling of_parse_phandle
gpu: drm: sti_compositor: add missing of_node_put after calling of_parse_phandle
drm/tilcdc: use drm_crtc_handle_vblank()
drm/rcar-du: use drm_crtc_handle_vblank()
drm/nouveau: use drm_crtc_handle_vblank()
drm/atmel: use drm_crtc_handle_vblank()
drm/armada: use drm_crtc_handle_vblank()
drm: make drm_vblank_count_and_time() static
...
This is a minor interface change, but clearly won't break anything.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A little fallout from "drm/amdgpu: sanitize fence numbers", we
sometimes need to signal all fences in the ring.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we can run into the following situation:
1. Process A grabs ID 1 for ring 0.
2. Process B grabs ID 1 for ring 0.
3. Process A grabs ID 1 for ring 1.
4. Process A tries to reuse ID1 for ring 0 but things he doesn't need to flush.
v2: check the context of the flush fence instead of messing with the owner field.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We already waited for the fence, so waiting for the registers
is completely pointless and just copy & pasted from the ring test.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reference should be taken when we make the assignment, not anywhere else.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleanup 80 chars limit.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We always used updated firmware for amdgpu, so this actually should work fine.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix 80 chars issues and remove some dead code as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like the VCE block sometimes still sends nonsense
fence numbers on startup.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create a GC_CAC_IND_INDEX/DATA pair of funcitons to program
all the CAC registers
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the num of shade engine was needed to
measure the activity of the graphics core
and to enable di/dt feature.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V3: directly use pd_addr.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
which avoids job->vm_pd_addr be changed.
V2: pass job structure to amdgpu_vm_grab_id and amdgpu_vm_flush directly.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After all hw jobs are reset, hw fence is meaningless, so force_completion
Cc: William Lewis <minutemaidpark@hotmail.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previous vm fault is since page talbe losts connection with vmid after gpu reset.
Now the issue is fixed by recovery. No need more.
If we want to save vram for some EDC card, we will need to consider a complete solution.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We return the fence as part of the job structur anyway,
no need to do this twice.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep the time we don't have a fence associated with the resource smaller.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fence and the sync object are not hardware resources.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same problem as with the VM page tables. The user fence address must be
determined before the job is scheduled, not when the IB is executed.
This fixes a security problem where user fences could be used to overwrite
any part of VRAM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(v2) Added INSTANCE selector
(v3) Changed order of bank selectors
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A binary entry that lists GCA configuration data (and can be
read by umr).
(v2) Use kmalloc instead of vmalloc
(v3) Minor indentation correction
(v4) agd: Squash in kmalloc fix
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ability to specify instance in select_se_sh callback.
Defaults to 0xffffffff all over the driver.
(v2) Don't enable INSTANCE_BROADCAST by default
(v3) Style changes
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DRM_CONNECTOR_POLL_CONNECT only enables polling for connections, not
disconnections. Because of this, we end up losing hotplug polling for
analog connectors once they get connected.
Easy way to reproduce:
- Grab a machine with an AMD GPU and a VGA port
- Plug a monitor into the VGA port, wait for it to update the connector
from disconnected to connected
- Disconnect the monitor on VGA, a hotplug event is never sent for the
removal of the connector.
Originally, only using DRM_CONNECTOR_POLL_CONNECT might have been a good
idea since doing VGA polling can sometimes result in having to mess with
the DAC voltages to figure out whether or not there's actually something
there since VGA doesn't have HPD. Doing this would have the potential of
showing visible artifacts on the screen every time we ran a poll while a
VGA display was connected. Luckily, amdgpu_vga_detect() only resorts to
this sort of polling if the poll is forced, and DRM's polling helper
doesn't force it's polls.
Additionally, this removes some assignments to connector->polled that
weren't actually doing anything.
Cc: stable@vger.kernel.org
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V2: Add wait_for_mc_idle after stopping fb access
V3:
1. Remove resume fb access since there is no need to
do that for gpu reset.
2. Move stop fb access to amdgpu_gpu_reset function,
since it's the same for all asics.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com> (V1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Record the gpu reset count in vmid to identify if gpu reset happened.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Record the gpu reset count in vmid to identify if gpu reset happened.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This flag was being set unconditionally at runtime so just set it at
compile time instead.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If reservation_object_get_fences_rcu failed, we'd previously go directly
to the cleanup label, so we'd leave the BO pinned.
While we're at it, remove two amdgpu_bo_unreserve calls in favour of two
new labels.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixed mc stop and resume hardware programming sequence.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Helpers to to call the IP functions for the selected IP.
Reviewed-by: Chunming zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use UPDATE_IMMEDIATE (update on next data request boundary) rather
than UPDATE_H_RETRACE (update on next line boundary). The data
request boundary is less than a scanline, so it update will happen
sooner.
Cc: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's just overhead to do so and allocating a VMID
when we don't need one is actually a bit dangerous.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flush and invalidate the HDP caches.
v2: fix typo in comment
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch changes pcie_gen_cap magic code to macro to make it more
readable.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Cc: Eric Huang <JinHuiEric.Huang@amd.com>
Cc: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfx8 already uses them. Remove the direct exports and
use the callbacks fpr gfx7.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's gfx IP specific, not asic specific, so move to a
gfx callback.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's gfx IP specific, not asic specific, so move to a
gfx callback.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only used in the gmc IP modules so just call the local
function directly.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are not used outside of the respective gmc ip modules.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We don't need to validate them again if the eviction counter didn't changed.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep track of the number of evictions since boot.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
irq need to update when gpu reset happens.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With the current code, when we boot with the amdgpu
driver enabled and loaded, the VCE also automatically
remains enabled since bootup. This can be verified from
the output of amdgpu_pm_info. It does not matter whether
we boot into command line directly or into X, the VCE
stays enabled the entire time.
This patch addresses the issue and makes sure that
VCE is turned on only during playback, and remains
disaled otherwise.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to stall the pipe when we are using firmware with the
fix.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: do not overwrite register when bitmap is zero
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: do not overwrite register when bitmap is zero
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This parameter will allow disabling individual CUs on module load, e.g.
amdgpu.disable_cu=2.0.3,2.0.4 to disable CUs 3 and 4 of SE2.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On workstation cards with ECC vram, the entirety of vram is cleared to 0
on asic init to set the ECC status correctly. On non ECC boards, I don't
think they do any explicit clearing, but the vram controller is reset
which may cause issues with the data there.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This boosts Xonotic from 38fps to 47fps when artificially limiting VRAM to
256MB for testing. It should improve all CPU bound rendering situations
where we have a lot of swapping to/from VRAM.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we pipeline evictions the page directory could already be
moving somewhere else when grab_id is called.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It isn't used and not waiting for the GPU after scheduling a move is
actually quite dangerous.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed any more.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we could update the VM page tables while the move is only scheduled.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we want to pipeline accelerated moves we need to wait in the fallback path.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wait for idle before moving the BO in all drivers implementing
an accelerated move function.
This should keep the current behavior when removing the pre move wait.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It changes the way to skip newline character and also avoids
warning message from some compiler.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new amdgpu_firmware_info function will be used on amdgpu firmware
version debugfs.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was redundant with data_length, and in fact set incorrectly in one case
leading to an out-of-bound read by memcpy in acpi_ut_copy_esimple_to_isimple,
reported by CONFIG_KASAN=y.
Signed-off-by: Nicolai Hähnle <Nicolai.Haehnle@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Saves power when not in use.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align to the jump table offset. May fix hangs on some
asics with GFX PG enabled.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Acked-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align to the jump table offset. Fixes hangs on some
systems with GFX PG enabled.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Tested-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- adding amdgpu_cs_bo_status to track total size and
total entry count of bo for each submission.
- adding amdgpu_ttm_bo_move to track the bo eviction
including the size of bo and the location before/after the move
Signed-off-by: David Mao <David.Mao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- adding memory type, prefered heap, allowed heap, and host visible
information to the amdgpu_bo_create tracepoint.
- adding bo size to the amdgpu_bo_list_set tracepoint.
Signed-off-by: David Mao <David.Mao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To make the code more legible various numerical constants
have been changed to their #define'ed MASKs.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize the variable in a straight-forward way instead of
hiding the initialization inside the loop. This can also
reduce one function call.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use == instead of != in the if statement to make code easier understood
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add comment to describe some variables otherwise.
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-enable bus mastering after GPU reset. We disable it
at the top of these functions, so balance them by
re-enabling it.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
eviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we know whether or not the reset succeeded.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vm_flush() now comes directly after vm_grab_id().
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just wait for any fence to become available, instead
of waiting for the last entry of the LRU.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes a fairness problem with the GPU scheduler. VM having lot of
jobs could previously starve VM with less jobs.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prefer to use a VMIDs which are idle on the ring we want to submit to. This
also removes bubbling idle VMIDs up on the LRU, which is actually not
beneficial.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if the sync object is idle depending on the ring a submission works with.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stop hiding bugs, instead print a proper error when the scheduler
doesn't handle all dependencies.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make it two events, one for the job being scheduled and one when it is finished.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not obvious what it should do.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable all relevant CG flags for Stoney parts.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
According to the bringup code ST/CZ share the RLC
ENTER/EXIT logic.
Tested on my ST board.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They allow disabling clock and power gating from the kernel command line,
which hopefully helps with diagnosing problems in the field.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Nicolai Hähnle <Nicolai.Haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add tracepoints to the MMIO read/write so we can log
MMIO traffic.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The non-powerplay code handles this directly. Do
it in cgs for powerplay.
Signed-off-by: yanyang1 <Young.Yang@amd.com>
Reviewed-by: Rex Zhu Rex.Zhu@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Until Dave's patch to support the new hybrid gfx ACPI method goes
upstream, we can fallback to the old ATPX method which seems to
still work.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
so that we could actually reset the GPU when it hangs.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
debugfs file added but not released after driver unloaded
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a user tries to read a non-multiple of 4 bytes it would have
read until the end of the ring potentially crashing the user
task.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They now emit ring data in binary which will be read/written by
the userspace tool umr shortly.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ATPX power control method does this for you.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The platform d3 cold is used to power down the dGPU.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hybrid graphics in this case refers to systems which use the new
platform d3 cold ACPI methods as opposed to ATPX for dGPU power
control.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that we handle this correctly, there is no need to force
it.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On PX systems without dGPU power control, use PCI_D3hot.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The runtime pm sequence is different depending on whether or
not the platform supports ATPX dGPU power control.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ATPX dGPU power control requires a 200ms delay between
power off and on. This should fix dGPU failures on
resume from power off.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The presence of the power control method should be determined
via the presence of the method in function 0. However, some
sbioses only set the appropriate bits in function 1 so use
then to override a missing power control function.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Windows 10 (and some 8.1) systems use standardized
ACPI calls for hybrid laptops to control dGPU power.
Detect those cases and disable the AMD specific ATPX
power control.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Must wait for SERDES idle before exiting RLC SAFEMODE
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The maximum OD percentage is 20.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This implements mclk OverDrive(OD) through sysfs.
The new entry pp_mclk_od is read/write. The value of input/output
is an integer of the overclocking percentage.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch makes powercontainment feature configurable. Currently, the
powercontainment is not very stable, so add a module parameter to
enable/disable it via user mode.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the job reference counting and just properly destroy it from a
work item which blocks on any potential running timeout handler.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk.Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver shouldn't mess with the scheduler internals.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk.Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remembering the code path in a variable to cleanup
differently is usually not a good idea at all.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk.Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ther should be a new line between code and decleration.
Also use amdgpu_ib_free() instead of releasing the member manually.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk.Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Completely pointless and confusing to use a callback
to call into the same code file.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk.Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This extends OD (OverDrive) support to the non-Powerplay code paths.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This extends dpm clock level selection to the non-powerplay code paths.
This interface can be used to select individual clock levels.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Based on Alex's patches this enables GFX PG on CZ.
Tested with xonotic-glx/glxgears/supertuxkart and idle desktop.
Also read-back registers via umr for verificiation that the bits
are truly enabled.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new sysfs entry pp_sclk_od to support sclk overdrive(OD) overclocking,
the entry is read/write, the value of input/output is an integer which is the
over percentage of the highest sclk.
v2: drop extra semicolon
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The power tables on some variants require different firmware.
This fixes stability issues on some newer CI parts.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=91880
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This help fix reloading driver hang issue of SDMA
ring.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXcHi9AAoJEHm+PkMAQRiGSJ0H/2o4t9VWYmhyPC1sdIHoCExJ
P4tBrcZYBmKcsOmIfnJDa5g/+IdhouEUM0v0fHPogS2UUWT9eRuJWYD3sY+HpEQ+
heKTli8X73gsFB25odeIbIt0jAoSiiMYWDrWqLNsuUV1tjEYVA8rH0SM94FiOC/5
7WVWXLTuH+Rm7JHP18BnKxmMMbzrTFmwisLMqFKyfZRRSlS+/ix7iLUNO9AFa39B
YHxNPihLrZ0oONyCOAQoHTIXXrw0cQbxV2utg3vnMcCZdme2xOn+iXMntTSKfZ39
iC9/T0vsO3R6OrRo2aDZAnCPUAniXnMEIhrKG37WMyXpj6cucZ/2QiNXcXviGV4=
=iLte
-----END PGP SIGNATURE-----
Back-merge tag 'v4.7-rc5' into drm-next
Linux 4.7-rc5
The fsl-dcu pull needs -rc3 so go to -rc5 for now.
workaround issue that when uvd dpm disabled,
uvd clock remain high on polaris10. Manually turn
off the clocks.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a temporary workaround for early boards.
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu leaks a runtime pm ref if at least one CRTC is enabled on unload.
The ref is taken by amdgpu_crtc_set_config() and held as long as a CRTC
is in use. Fix by turning off all CRTCs on unload.
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/7bf8d9ceb9d343a7495788667e6da170b8fd3af1.1465392124.git.lukas@wunner.de
The PCI core calls pm_runtime_forbid() on device probe in pci_pm_init(),
making this the default state when amdgpu is loaded.
amdgpu_driver_load_kms() therefore calls pm_runtime_allow(), but there's
no pm_runtime_forbid() in amdgpu_driver_unload_kms() to balance it. Add
it so that we leave the device in the same state that we found it.
This isn't a bug, it's just good housekeeping. When amdgpu is first
loaded with runpm=1, then unloaded and loaded again with runpm=0,
pm_runtime_forbid() will be called from amdgpu_pmops_runtime_idle() or
amdgpu_pmops_runtime_suspend(), so the behaviour is correct. If there
ever is a third party driver for AMD cards, this commit avoids that it
has to clean up behind amdgpu.
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/ccd4f7208acbd7761364418fc34f7849acbb4597.1465392124.git.lukas@wunner.de
If an error occurs in amdgpu_device_init() after adev->rmmio has been
set, its caller amdgpu_driver_load_kms() will skip runtime pm
initialization and call amdgpu_driver_unload_kms(), which acquires a
runtime pm ref that is leaked.
Balance by releasing a runtime pm ref in the error path of
amdgpu_driver_load_kms().
Fixes: d38ceaf99e ("drm/amdgpu: add core driver (v4)")
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/9a53449865759d7499a439ca2776093ee117b1eb.1465392124.git.lukas@wunner.de
amdgpu_driver_load_kms() calls pm_runtime_put_autosuspend() if
amdgpu_device_is_px(dev), but amdgpu_driver_unload_kms() calls
pm_runtime_get_sync() unconditionally. We therefore leak a runtime pm
ref whenever amdgpu is unloaded on a non-PX machine or if runpm=0. The
GPU will subsequently never runtime suspend after loading amdgpu again.
Fix by taking the runtime pm ref under the same condition that it was
released on driver load.
Fixes: d38ceaf99e ("drm/amdgpu: add core driver (v4)")
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/86364eeb5711323608930c4f0f69046792ff6d3c.1465392124.git.lukas@wunner.de
amdgpu_cgs_acpi_eval_object() returned the value of variable "result"
without initializing it first.
This bug has been found by compiling the kernel with clang. The
compiler complained:
drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:972:14: error: variable
'result' is used uninitialized whenever 'for' loop exits because its
condition is false [-Werror,-Wsometimes-uninitialized]
for (i = 0; i < count; i++) {
^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:1011:9: note: uninitialized
use occurs here
return result;
^~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:972:14: note: remove the
condition if it is always true
for (i = 0; i < count; i++) {
^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c:864:12: note: initialize the
variable 'result' to silence this warning
int result;
^
= 0
Fixes: 3f1d35a03b ("drm/amdgpu: implement new cgs interface for acpi
function")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
! has higher precedence than bitwise & so we need to add parenthesis
for this to work as intended.
Fixes: 048765ad5a ('amdgpu: fix asic initialization for virtualized environments (v2)')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was accidently broken for harvest cards when the
code was refactored for Polaris support.
v2: multiply by shader engines. Noticed by Nicolai.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
There is no limit on high "idx" can go. It should be less than
ARRAY_SIZE(data.states) which is 16.
The "data" variable wasn't declared in that scope so I shifted the code
around a bit to make it work. Also I made "idx" unsigned.
Fixes: f3898ea12f ('drm/amd/powerplay: add some sysfs interfaces for powerplay.')
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If a PM domain is powered off when the first device starts its system PM
prepare phase, genpd prevents any further attempts to power on the PM
domain during the following system PM phases. Not until the system PM
complete phase is finalized for all devices in the PM domain, genpd again
allows it to be powered on.
This behaviour needs to be changed, as a subsystem/driver for a device in
the same PM domain may still need to be able to serve requests in some of
the system PM phases. Accordingly, it may need to runtime resume its
device and thus also request the corresponding PM domain to be powered on.
To deal with these scenarios, let's make the device operational in the
system PM prepare phase by runtime resuming it, no matter if the PM domain
is powered on or off. Changing this also enables us to remove genpd's
suspend_power_off flag, as it's being used to track this condition.
Additionally, we must allow the PM domain to be powered on via runtime PM
during the system PM phases.
This change also requires a fix in the AMD ACP (Audio CoProcessor) drm
driver. It registers a genpd to model the ACP as a PM domain, but
unfortunately it's also abuses genpd's "internal" suspend_power_off flag
to deal with a corner case at system PM resume.
More precisely, the so called SMU block powers on the ACP at system PM
resume, unconditionally if it's being used or not. This may lead to that
genpd's internal status of the power state, may not correctly reflect the
power state of the HW after a system PM resume.
Because of changing the behaviour of genpd, by runtime resuming devices in
the prepare phase, the AMD ACP drm driver no longer have to deal with this
corner case. So let's just drop the related code in this driver.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This reverts commit 2ba272d7bd.
The issue fixed by this patch is specific to compute rings and the
previous patch was enough. Additionally, this patch as been traced
to strange behavior on some CZ systems so we might as well drop it.
When executing in a PCI passthrough based virtuzliation environemnt, the
hypervisor will usually attempt to send a PCIe bus reset signal to the
ASIC when the VM reboots. In this scenario, the card is not correctly
initialized, but we still consider it to be posted. Therefore, in a
passthrough based environemnt we should always post the card to guarantee
it is in a good state for driver initialization.
However, if we are operating in SR-IOV mode it is up to the GIM driver
to manage the asic state, therefore we should not post the card (and
shouldn't be able to do it either).
v2: add missing semi-colon
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andres.rodriguez@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Powerplay uses cgs to load the firmware so add a function
to release it as well to avoid leaking it on driver unload.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since vmid-mgr supports vmid sharing in one vm, the same ctx could
get different vmids for two emits without vm flush, vm_flush could
be done in another ring.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
should fist halt engine, and then doing the register
programing, and later unhalt engine, and finally run
ring_test.
this help fix reloading driver hang issue of SDMA
ring
original sequence is wrong for it programing engine
after unhalt, which will lead to fault behavior when
doing driver reloading after unloaded.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This help fix reloading driver hang issue of SDMA
ring
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This help fix reloading driver hang issue of SDMA
ring
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1,should use late_fini to kfree all resource otherwise
the released pointer maybe accessed in IRQ ip fini routine.
2,hwmgr should not be kfree by pem_fini which is invoked
by hw fini path.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This implements late_init support for powerplay.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the raster config setting for different iceland configs.
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change return value to int to propagate errors from gamma_set,
and remove start parameter. Updates always use the full size,
and some drivers even ignore the start parameter altogether.
This is needed for atomic drivers, where an atomic commit can
fail with -EINTR or -ENOMEM and should be restarted. This is already
and issue for drm_atomic_helper_legacy_set_gamma, which this patch
fixes up.
Changes since v1:
- Fix compiler warning. (Emil)
- Fix commit message (Daniel)
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Mathieu Larouche <mathieu.larouche@matrox.com>
Cc: Thierry Reding <treding@nvidia.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Improve commit message a bit more, mention that this fixes
the helper.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/742944bc-9f41-1acb-df4f-0fd4c8a10168@linux.intel.com
Fence contexts are created on the fly (for example) by the GPU scheduler used
in the amdgpu driver as a result of an userspace request. Because of this
userspace could in theory force a wrap around of the 32bit context number
if it doesn't behave well.
Avoid this by increasing the context number to 64bits. This way even when
userspace manages to allocate a billion contexts per second it takes more
than 500 years for the context number to wrap around.
v2: fix printf formats as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1464786612-5010-2-git-send-email-deathsimple@vodafone.de
AMD GPU bugfixes:
- Various powerplay bug fixes
- Add some new polaris pci ids
- misc bug fixes and code cleanups
* 'drm-next-4.7' of git://people.freedesktop.org/~agd5f/linux: (27 commits)
drm/amd: add Kconfig dependency for ACP on DRM_AMDGPU
drm/amdgpu: Fix hdmi deep color support.
drm/amdgpu: fix bug in fence driver fini
drm/amd/powerplay/hwmgr: use kmemdup
drm/amd/powerplay/hwmgr: use kmemdup
drm/amd/powerplay/hwmgr: use kmemdup
drm/amd/powerplay: fix bugs of checking if dpm is running on Tonga
drm/amdgpu: update Polaris11 golden setting
drm/amdgpu: Add more Polaris 11 PCI IDs
drm/amdgpu: update Polaris10 golden setting
drm/amdgpu: add more Polaris10 DID
drm/amd/amdgpu : Remove unused variable
drm/amd/amdgpu : Remove unused variable
drm/amd/amdgpu : Remove unused variable
drm/amd/amdgpu/cz_dpm: Remove unused variable
drm/amd/amdgpu : Remove unused variable
drm/amd/powerplay: use ARRAY_SIZE() to calculate array size.
drm/amdgpu: fix array out of bounds
drm/radeon: fix array out of bounds
drm/amd/powerplay: fix a bug on updating sclk for Tonga
...
When porting the hdmi deep color detection code from
radeon-kms to amdgpu-kms apparently some kind of
copy and paste error happened, attaching an else
branch to the wrong if statement.
The result is that hdmi deep color mode is always
disabled, regardless of gpu and display capabilities and
user wishes, as the code mistakenly thinks that the display
doesn't provide the required max_tmds_clock limit and falls
back to 8 bpc.
This patch fixes deep color support, as tested on a
R9 380 Tonga Pro + suitable display, and should be
backported to all kernels with amdgpu-kms support.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: stable@vger.kernel.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using wrong counter for walking fences. Fixes
a crash when unloading the driver.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge yet more updates from Andrew Morton:
- Oleg's "wait/ptrace: assume __WALL if the child is traced". It's a
kernel-based workaround for existing userspace issues.
- A few hotfixes
- befs cleanups
- nilfs2 updates
- sys_wait() changes
- kexec updates
- kdump
- scripts/gdb updates
- the last of the MM queue
- a few other misc things
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (84 commits)
kgdb: depends on VT
drm/amdgpu: make amdgpu_mn_get wait for mmap_sem killable
drm/radeon: make radeon_mn_get wait for mmap_sem killable
drm/i915: make i915_gem_mmap_ioctl wait for mmap_sem killable
uprobes: wait for mmap_sem for write killable
prctl: make PR_SET_THP_DISABLE wait for mmap_sem killable
exec: make exec path waiting for mmap_sem killable
aio: make aio_setup_ring killable
coredump: make coredump_wait wait for mmap_sem for write killable
vdso: make arch_setup_additional_pages wait for mmap_sem for write killable
ipc, shm: make shmem attach/detach wait for mmap_sem killable
mm, fork: make dup_mmap wait for mmap_sem for write killable
mm, proc: make clear_refs killable
mm: make vm_brk killable
mm, elf: handle vm_brk error
mm, aout: handle vm_brk failures
mm: make vm_munmap killable
mm: make vm_mmap killable
mm: make mmap_sem for write waits killable for mm syscalls
MAINTAINERS: add co-maintainer for scripts/gdb
...
amdgpu_mn_get which is called during ioct path relies on mmap_sem for
write. If the waiting task gets killed by the oom killer it would block
oom_reaper from asynchronous address space reclaim and reduce the
chances of timely OOM resolving. Wait for the lock in the killable mode
and return with EINTR if the task got killed while waiting.
[arnd@arndb.de: use ERR_PTR() to return from amdgpu_mn_get]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull drm updates from Dave Airlie:
"Here's the main drm pull request for 4.7, it's been a busy one, and
I've been a bit more distracted in real life this merge window. Lots
more ARM drivers, not sure if it'll ever end. I think I've at least
one more coming the next merge window.
But changes are all over the place, support for AMD Polaris GPUs is in
here, some missing GM108 support for nouveau (found in some Lenovos),
a bunch of MST and skylake fixes.
I've also noticed a few fixes from Arnd in my inbox, that I'll try and
get in asap, but I didn't think they should hold this up.
New drivers:
- Hisilicon kirin display driver
- Mediatek MT8173 display driver
- ARC PGU - bitstreamer on Synopsys ARC SDP boards
- Allwinner A13 initial RGB output driver
- Analogix driver for DisplayPort IP found in exynos and rockchip
DRM Core:
- UAPI headers fixes and C++ safety
- DRM connector reference counting
- DisplayID mode parsing for Dell 5K monitors
- Removal of struct_mutex from drivers
- Connector registration cleanups
- MST robustness fixes
- MAINTAINERS updates
- Lockless GEM object freeing
- Generic fbdev deferred IO support
panel:
- Support for a bunch of new panels
i915:
- VBT refactoring
- PLL computation cleanups
- DSI support for BXT
- Color manager support
- More atomic patches
- GEM improvements
- GuC fw loading fixes
- DP detection fixes
- SKL GPU hang fixes
- Lots of BXT fixes
radeon/amdgpu:
- Initial Polaris support
- GPUVM/Scheduler/Clock/Power improvements
- ASYNC pageflip support
- New mesa feature support
nouveau:
- GM108 support
- Power sensor support improvements
- GR init + ucode fixes.
- Use GPU provided topology information
vmwgfx:
- Add host messaging support
gma500:
- Some cleanups and fixes
atmel:
- Bridge support
- Async atomic commit support
fsl-dcu:
- Timing controller for LCD support
- Pixel clock polarity support
rcar-du:
- Misc fixes
exynos:
- Pipeline clock support
- Exynoss4533 SoC support
- HW trigger mode support
- export HDMI_PHY clock
- DECON5433 fixes
- Use generic prime functions
- use DMA mapping APIs
rockchip:
- Lots of little fixes
vc4:
- Render node support
- Gamma ramp support
- DPI output support
msm:
- Mostly cleanups and fixes
- Conversion to generic struct fence
etnaviv:
- Fix for prime buffer handling
- Allow hangcheck to be coalesced with other wakeups
tegra:
- Gamme table size fix"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1050 commits)
drm/edid: add displayid detailed 1 timings to the modelist. (v1.1)
drm/edid: move displayid validation to it's own function.
drm/displayid: Iterate over all DisplayID blocks
drm/edid: move displayid tiled block parsing into separate function.
drm: Nuke ->vblank_disable_allowed
drm/vmwgfx: Report vmwgfx version to vmware.log
drm/vmwgfx: Add VMWare host messaging capability
drm/vmwgfx: Kill some lockdep warnings
drm/nouveau/gr/gf100-: fix race condition in fecs/gpccs ucode
drm/nouveau/core: recognise GM108 chipsets
drm/nouveau/gr/gm107-: fix touching non-existent ppcs in attrib cb setup
drm/nouveau/gr/gk104-: share implementation of ppc exception init
drm/nouveau/gr/gk104-: move rop_active_fbps init to nonctx
drm/nouveau/bios/pll: check BIT table version before trying to parse it
drm/nouveau/bios/pll: prevent oops when limits table can't be parsed
drm/nouveau/volt/gk104: round up in gk104_volt_set
drm/nouveau/fb/gm200: setup mmu debug buffer registers at init()
drm/nouveau/fb/gk20a,gm20b: setup mmu debug buffer registers at init()
drm/nouveau/fb/gf100-: allocate mmu debug buffers
drm/nouveau/fb: allow chipset-specific actions for oneinit()
...
This was added in
commit 0a3e67a4ca
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Tue Sep 30 12:14:26 2008 -0700
drm: Rework vblank-wait handling to allow interrupt reduction.
to stay backwards-compatible with old UMS code that didn't even tell
the kernel when it did a modeset, so that the kernel could
save/restore vblank counters. At worst this means vblanks will be
somewhat funky on a setup that very likely no one still runs.
So let's just nuke it.
Plan B would be to set it unconditionally in drm_vblank_init for kms
drivers, instead of in each driver separately. So if this patch breaks
anything please only restore the hunks in drmP.h and drm_irq.c, plus
add a check for DRIVER_MODESET in drm_vblank_init.
Stumbled over this in a discussion on irc with Chris.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unused variable 'ret' from functions where it
was not used anyway, and directly return 0.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_gem_object_lookup() has never required the drm_device for its file
local translation of the user handle to the GEM object. Let's remove the
unused parameter and save some space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: dri-devel@lists.freedesktop.org
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Fixup kerneldoc too.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When the initial value of i is greater than zero,
it may cause endless loop, resulting in array out
of bounds, fix it.
This is a port of the radeon fix to amdgpu.
Signed-off-by: tom will <os@iscas.ac.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This avoids problems with multiple GPUs. For example,
if the first GPU failed before amdgpu_fence_init() was
called, amdgpu_fence_slab_ref is still 0 and it will
get decremented in amdgpu_fence_driver_fini(). This
will lead to a crash during init of the second GPU since
amdgpu_fence_slab_ref is not 0.
v2: add functions for init/exit instead of
moving the variables into the driver.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switch the order of the loops to walk the rates on the top
so we exhaust all DP 1.1 rate/lane combinations before trying
DP 1.2 rate/lane combos.
This avoids selecting rates that are supported by the monitor,
but not the connector leading to valid modes getting rejected.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=95206
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Bundle some VM table parameters into amdgpu_vm_update_params structure,
so that number of function parameters can be reduced. Only structural
change, no logic change.
v2: agd: squash in fix from Harish
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
