In case L0 didn't allocate vmx->nested.vpid02 for L2,
vmcs02->vpid is set to vmx->vpid.
Consider this case when emulating L1 INVVPID in L0.
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If L1 and L2 share VPID (because L1 don't use VPID or we haven't allocated
a vpid02), we need to flush TLB on L1<->L2 transitions.
Before this patch, this TLB flushing was done by vmx_flush_tlb().
If L0 use EPT, this will translate into INVEPT(active_eptp);
However, if L1 use EPT, in L1->L2 VMEntry, active EPTP is EPTP01 but
TLB entries populated by L2 are tagged with EPTP02.
Therefore we should delay vmx_flush_tlb() until active_eptp is EPTP02.
To achieve this, instead of directly calling vmx_flush_tlb() we request
it to be called by KVM_REQ_TLB_FLUSH which is evaluated after
KVM_REQ_LOAD_CR3 which sets the active_eptp to EPTP02 as required.
Similarly, on L2->L1 VMExit, active EPTP is EPTP02 but TLB entries
populated by L1 are tagged with EPTP01 and therefore we should delay
vmx_flush_tlb() until active_eptp is EPTP01.
Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The KVM_GUEST_CR0_MASK macro tracks CR0 bits that are forced to zero
by the VMX architecture, i.e. CR0.{NW,CD} must always be zero in the
hardware CR0 post-VMXON. Rename the macro to clarify its purpose,
be consistent with KVM_VM_CR0_ALWAYS_ON and avoid confusion with the
CR0_GUEST_HOST_MASK field.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I'm observing random crashes in multi-vCPU L2 guests running on KVM on
Hyper-V. I bisected the issue to the commit 877ad952be ("KVM: vmx: Add
tlb_remote_flush callback support"). Hyper-V TLFS states:
"AddressSpace specifies an address space ID (an EPT PML4 table pointer)"
So apparently, Hyper-V doesn't expect us to pass naked EPTP, only PML4
pointer should be used. Strip off EPT configuration information before
calling into vmx_hv_remote_flush_tlb().
Fixes: 877ad952be ("KVM: vmx: Add tlb_remote_flush callback support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit b5861e5cf2 introduced a check on
the interrupt-window and NMI-window CPU execution controls in order to
inject an external interrupt vmexit before the first guest instruction
executes. However, when APIC virtualization is enabled the host does not
need a vmexit in order to inject an interrupt at the next interrupt window;
instead, it just places the interrupt vector in RVI and the processor will
inject it as soon as possible. Therefore, on machines with APICv it is
not enough to check the CPU execution controls: the same scenario can also
happen if RVI>vPPR.
Fixes: b5861e5cf2
Reviewed-by: Nikita Leshchenko <nikita.leshchenko@oracle.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Liran Alon <liran.alon@oracle.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As of commit 8d860bbeed ("kvm: vmx: Basic APIC virtualization controls
have three settings"), KVM will disable VIRTUALIZE_APIC_ACCESSES when
a nested guest writes APIC_BASE MSR and kvm-intel.flexpriority=0,
whereas previously KVM would allow a nested guest to enable
VIRTUALIZE_APIC_ACCESSES so long as it's supported in hardware. That is,
KVM now advertises VIRTUALIZE_APIC_ACCESSES to a guest but doesn't
(always) allow setting it when kvm-intel.flexpriority=0, and may even
initially allow the control and then clear it when the nested guest
writes APIC_BASE MSR, which is decidedly odd even if it doesn't cause
functional issues.
Hide the control completely when the module parameter is cleared.
reported-by: Sean Christopherson <sean.j.christopherson@intel.com>
Fixes: 8d860bbeed ("kvm: vmx: Basic APIC virtualization controls have three settings")
Cc: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return early from vmx_set_virtual_apic_mode() if the processor doesn't
support VIRTUALIZE_APIC_ACCESSES or VIRTUALIZE_X2APIC_MODE, both of
which reside in SECONDARY_VM_EXEC_CONTROL. This eliminates warnings
due to VMWRITEs to SECONDARY_VM_EXEC_CONTROL (VMCS field 401e) failing
on processors without secondary exec controls.
Remove the similar check for TPR shadowing as it is incorporated in the
flexpriority_enabled check and the APIC-related code in
vmx_update_msr_bitmap() is further gated by VIRTUALIZE_X2APIC_MODE.
Reported-by: Gerhard Wiesinger <redhat@wiesinger.com>
Fixes: 8d860bbeed ("kvm: vmx: Basic APIC virtualization controls have three settings")
Cc: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
L2 IA32_BNDCFGS should be updated with vmcs12->guest_bndcfgs only
when VM_ENTRY_LOAD_BNDCFGS is specified in vmcs12->vm_entry_controls.
Otherwise, L2 IA32_BNDCFGS should be set to vmcs01->guest_bndcfgs which
is L1 IA32_BNDCFGS.
Reviewed-by: Nikita Leshchenko <nikita.leshchenko@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit a87036add0 ("KVM: x86: disable MPX if host did not enable
MPX XSAVE features") introduced kvm_mpx_supported() to return true
iff MPX is enabled in the host.
However, that commit seems to have missed replacing some calls to
kvm_x86_ops->mpx_supported() to kvm_mpx_supported().
Complete original commit by replacing remaining calls to
kvm_mpx_supported().
Fixes: a87036add0 ("KVM: x86: disable MPX if host did not enable
MPX XSAVE features")
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before this commit, KVM exposes MPX VMX controls to L1 guest only based
on if KVM and host processor supports MPX virtualization.
However, these controls should be exposed to guest only in case guest
vCPU supports MPX.
Without this change, a L1 guest running with kernel which don't have
commit 691bd4340b ("kvm: vmx: allow host to access guest
MSR_IA32_BNDCFGS") asserts in QEMU on the following:
qemu-kvm: error: failed to set MSR 0xd90 to 0x0
qemu-kvm: .../qemu-2.10.0/target/i386/kvm.c:1801 kvm_put_msrs:
Assertion 'ret == cpu->kvm_msr_buf->nmsrs failed'
This is because L1 KVM kvm_init_msr_list() will see that
vmx_mpx_supported() (As it only checks MPX VMX controls support) and
therefore KVM_GET_MSR_INDEX_LIST IOCTL will include MSR_IA32_BNDCFGS.
However, later when L1 will attempt to set this MSR via KVM_SET_MSRS
IOCTL, it will fail because !guest_cpuid_has_mpx(vcpu).
Therefore, fix the issue by exposing MPX VMX controls to L1 guest only
when vCPU supports MPX.
Fixes: 36be0b9deb ("KVM: x86: Add nested virtualization support for MPX")
Reported-by: Eyal Moscovici <eyal.moscovici@oracle.com>
Reviewed-by: Nikita Leshchenko <nikita.leshchenko@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM has an old optimization whereby accesses to the kernel GS base MSR
are trapped when the guest is in 32-bit and not when it is in 64-bit mode.
The idea is that swapgs is not available in 32-bit mode, thus the
guest has no reason to access the MSR unless in 64-bit mode and
32-bit applications need not pay the price of switching the kernel GS
base between the host and the guest values.
However, this optimization adds complexity to the code for little
benefit (these days most guests are going to be 64-bit anyway) and in fact
broke after commit 678e315e78 ("KVM: vmx: add dedicated utility to
access guest's kernel_gs_base", 2018-08-06); the guest kernel GS base
can be corrupted across SMIs and UEFI Secure Boot is therefore broken
(a secure boot Linux guest, for example, fails to reach the login prompt
about half the time). This patch just removes the optimization; the
kernel GS base MSR is now never trapped by KVM, similarly to the FS and
GS base MSRs.
Fixes: 678e315e78
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to section "Checks on VMX Controls" in Intel SDM vol 3C, the
following check needs to be enforced on vmentry of L2 guests:
If the 'enable VPID' VM-execution control is 1, the value of the
of the VPID VM-execution control field must not be 0000H.
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to section "Checks on VMX Controls" in Intel SDM vol 3C,
the following check needs to be enforced on vmentry of L2 guests:
- Bits 5:0 of the posted-interrupt descriptor address are all 0.
- The posted-interrupt descriptor address does not set any bits
beyond the processor's physical-address width.
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case L1 do not intercept L2 HLT or enter L2 in HLT activity-state,
it is possible for a vCPU to be blocked while it is in guest-mode.
According to Intel SDM 26.6.5 Interrupt-Window Exiting and
Virtual-Interrupt Delivery: "These events wake the logical processor
if it just entered the HLT state because of a VM entry".
Therefore, if L1 enters L2 in HLT activity-state and L2 has a pending
deliverable interrupt in vmcs12->guest_intr_status.RVI, then the vCPU
should be waken from the HLT state and injected with the interrupt.
In addition, if while the vCPU is blocked (while it is in guest-mode),
it receives a nested posted-interrupt, then the vCPU should also be
waken and injected with the posted interrupt.
To handle these cases, this patch enhances kvm_vcpu_has_events() to also
check if there is a pending interrupt in L2 virtual APICv provided by
L1. That is, it evaluates if there is a pending virtual interrupt for L2
by checking RVI[7:4] > VPPR[7:4] as specified in Intel SDM 29.2.1
Evaluation of Pending Interrupts.
Note that this also handles the case of nested posted-interrupt by the
fact RVI is updated in vmx_complete_nested_posted_interrupt() which is
called from kvm_vcpu_check_block() -> kvm_arch_vcpu_runnable() ->
kvm_vcpu_running() -> vmx_check_nested_events() ->
vmx_complete_nested_posted_interrupt().
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VMX cannot be enabled under SMM, check it when CR4 is set and when nested
virtualization state is restored.
This should fix some WARNs reported by syzkaller, mostly around
alloc_shadow_vmcs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A VMX preemption timer value of '0' is guaranteed to cause a VMExit
prior to the CPU executing any instructions in the guest. Use the
preemption timer (if it's supported) to trigger immediate VMExit
in place of the current method of sending a self-IPI. This ensures
that pending VMExit injection to L1 occurs prior to executing any
instructions in the guest (regardless of nesting level).
When deferring VMExit injection, KVM generates an immediate VMExit
from the (possibly nested) guest by sending itself an IPI. Because
hardware interrupts are blocked prior to VMEnter and are unblocked
(in hardware) after VMEnter, this results in taking a VMExit(INTR)
before any guest instruction is executed. But, as this approach
relies on the IPI being received before VMEnter executes, it only
works as intended when KVM is running as L0. Because there are no
architectural guarantees regarding when IPIs are delivered, when
running nested the INTR may "arrive" long after L2 is running e.g.
L0 KVM doesn't force an immediate switch to L1 to deliver an INTR.
For the most part, this unintended delay is not an issue since the
events being injected to L1 also do not have architectural guarantees
regarding their timing. The notable exception is the VMX preemption
timer[1], which is architecturally guaranteed to cause a VMExit prior
to executing any instructions in the guest if the timer value is '0'
at VMEnter. Specifically, the delay in injecting the VMExit causes
the preemption timer KVM unit test to fail when run in a nested guest.
Note: this approach is viable even on CPUs with a broken preemption
timer, as broken in this context only means the timer counts at the
wrong rate. There are no known errata affecting timer value of '0'.
[1] I/O SMIs also have guarantees on when they arrive, but I have
no idea if/how those are emulated in KVM.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
[Use a hook for SVM instead of leaving the default in x86.c - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide a singular location where the VMX preemption timer bit is
set/cleared so that future usages of the preemption timer can ensure
the VMCS bit is up-to-date without having to modify unrelated code
paths. For example, the preemption timer can be used to force an
immediate VMExit. Cache the status of the timer to avoid redundant
VMREAD and VMWRITE, e.g. if the timer stays armed across multiple
VMEnters/VMExits.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A VMX preemption timer value of '0' at the time of VMEnter is
architecturally guaranteed to cause a VMExit prior to the CPU
executing any instructions in the guest. This architectural
definition is in place to ensure that a previously expired timer
is correctly recognized by the CPU as it is possible for the timer
to reach zero and not trigger a VMexit due to a higher priority
VMExit being signalled instead, e.g. a pending #DB that morphs into
a VMExit.
Whether by design or coincidence, commit f4124500c2 ("KVM: nVMX:
Fully emulate preemption timer") special cased timer values of '0'
and '1' to ensure prompt delivery of the VMExit. Unlike '0', a
timer value of '1' has no has no architectural guarantees regarding
when it is delivered.
Modify the timer emulation to trigger immediate VMExit if and only
if the timer value is '0', and document precisely why '0' is special.
Do this even if calibration of the virtual TSC failed, i.e. VMExit
will occur immediately regardless of the frequency of the timer.
Making only '0' a special case gives KVM leeway to be more aggressive
in ensuring the VMExit is injected prior to executing instructions in
the nested guest, and also eliminates any ambiguity as to why '1' is
a special case, e.g. why wasn't the threshold for a "short timeout"
set to 10, 100, 1000, etc...
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Consider the case L1 had a IRQ/NMI event until it executed
VMLAUNCH/VMRESUME which wasn't delivered because it was disallowed
(e.g. interrupts disabled). When L1 executes VMLAUNCH/VMRESUME,
L0 needs to evaluate if this pending event should cause an exit from
L2 to L1 or delivered directly to L2 (e.g. In case L1 don't intercept
EXTERNAL_INTERRUPT).
Usually this would be handled by L0 requesting a IRQ/NMI window
by setting VMCS accordingly. However, this setting was done on
VMCS01 and now VMCS02 is active instead. Thus, when L1 executes
VMLAUNCH/VMRESUME we force L0 to perform pending event evaluation by
requesting a KVM_REQ_EVENT.
Note that above scenario exists when L1 KVM is about to enter L2 but
requests an "immediate-exit". As in this case, L1 will
disable-interrupts and then send a self-IPI before entering L2.
Reviewed-by: Nikita Leshchenko <nikita.leshchenko@oracle.com>
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Lack of the kvm_ prefix gives the impression that it's a VMX or SVM
specific function, and there's no conflict that prevents adding the
kvm_ prefix.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Re-execution after an emulation decode failure is only intended to
handle a case where two or vCPUs race to write a shadowed page, i.e.
we should never re-execute an instruction as part of MMIO emulation.
As handle_ept_misconfig() is only used for MMIO emulation, it should
pass EMULTYPE_NO_REEXECUTE when using the emulator to skip an instr
in the fast-MMIO case where VM_EXIT_INSTRUCTION_LEN is invalid.
And because the cr2 value passed to x86_emulate_instruction() is only
destined for use when retrying or reexecuting, we can simply call
emulate_instruction().
Fixes: d391f12070 ("x86/kvm/vmx: do not use vm-exit instruction length
for fast MMIO when running nested")
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
nested_run_pending is set 20 lines above and check_vmentry_prereqs()/
check_vmentry_postreqs() don't seem to be resetting it (the later, however,
checks it).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Eduardo Valentin <eduval@amazon.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Pull x86 fixes from Thomas Gleixner:
- Correct the L1TF fallout on 32bit and the off by one in the 'too much
RAM for protection' calculation.
- Add a helpful kernel message for the 'too much RAM' case
- Unbreak the VDSO in case that the compiler desides to use indirect
jumps/calls and emits retpolines which cannot be resolved because the
kernel uses its own thunks, which does not work for the VDSO. Make it
use the builtin thunks.
- Re-export start_thread() which was unexported when the 32/64bit
implementation was unified. start_thread() is required by modular
binfmt handlers.
- Trivial cleanups
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation/l1tf: Suggest what to do on systems with too much RAM
x86/speculation/l1tf: Fix off-by-one error when warning that system has too much RAM
x86/kvm/vmx: Remove duplicate l1d flush definitions
x86/speculation/l1tf: Fix overflow in l1tf_pfn_limit() on 32bit
x86/process: Re-export start_thread()
x86/mce: Add notifier_block forward declaration
x86/vdso: Fix vDSO build if a retpoline is emitted
Two bug fixes:
1) missing entries in the l1d_param array; this can cause a host crash
if an access attempts to reach the missing entry. Future-proof the get
function against any overflows as well. However, the two entries
VMENTER_L1D_FLUSH_EPT_DISABLED and VMENTER_L1D_FLUSH_NOT_REQUIRED must
not be accepted by the parse function, so disable them there.
2) invalid values must be rejected even if the CPU does not have the
bug, so test for them before checking boot_cpu_has(X86_BUG_L1TF)
... and a small refactoring, since the .cmd field is redundant with
the index in the array.
Reported-by: Bandan Das <bsd@redhat.com>
Cc: stable@vger.kernel.org
Fixes: a7b9020b06
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Virtualization of Intel SGX depends on Enclave Page Cache (EPC)
management that is not yet available in the kernel, i.e. KVM support
for exposing SGX to a guest cannot be added until basic support
for SGX is upstreamed, which is a WIP[1].
Until SGX is properly supported in KVM, ensure a guest sees expected
behavior for ENCLS, i.e. all ENCLS #UD. Because SGX does not have a
true software enable bit, e.g. there is no CR4.SGXE bit, the ENCLS
instruction can be executed[1] by the guest if SGX is supported by the
system. Intercept all ENCLS leafs (via the ENCLS- exiting control and
field) and unconditionally inject #UD.
[1] https://www.spinics.net/lists/kvm/msg171333.html or
https://lkml.org/lkml/2018/7/3/879
[2] A guest can execute ENCLS in the sense that ENCLS will not take
an immediate #UD, but no ENCLS will ever succeed in a guest
without explicit support from KVM (map EPC memory into the guest),
unless KVM has a *very* egregious bug, e.g. accidentally mapped
EPC memory into the guest SPTEs. In other words this patch is
needed only to prevent the guest from seeing inconsistent behavior,
e.g. #GP (SGX not enabled in Feature Control MSR) or #PF (leaf
operand(s) does not point at EPC memory) instead of #UD on ENCLS.
Intercepting ENCLS is not required to prevent the guest from truly
utilizing SGX.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20180814163334.25724-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Substitute spaces with tab. No functional changes.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Message-Id: <1534398159-48509-1-git-send-email-wang.yi59@zte.com.cn>
Cc: stable@vger.kernel.org # L1TF
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For x86 this brings in PCID emulation and CR3 caching for shadow page
tables, nested VMX live migration, nested VMCS shadowing, an optimized
IPI hypercall, and some optimizations.
ARM will come next week.
There is a semantic conflict because tip also added an .init_platform
callback to kvm.c. Please keep the initializer from this branch,
and add a call to kvmclock_init (added by tip) inside kvm_init_platform
(added here).
Also, there is a backmerge from 4.18-rc6. This is because of a
refactoring that conflicted with a relatively late bugfix and
resulted in a particularly hellish conflict. Because the conflict
was only due to unfortunate timing of the bugfix, I backmerged and
rebased the refactoring rather than force the resolution on you.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJbdwNFAAoJEL/70l94x66DiPEH/1cAGZWGd85Y3yRu1dmTmqiz
kZy0V+WTQ5kyJF4ZsZKKOp+xK7Qxh5e9kLdTo70uPZCHwLu9IaGKN9+dL9Jar3DR
yLPX5bMsL8UUed9g9mlhdaNOquWi7d7BseCOnIyRTolb+cqnM5h3sle0gqXloVrS
UQb4QogDz8+86czqR8tNfazjQRKW/D2HEGD5NDNVY1qtpY+leCDAn9/u6hUT5c6z
EtufgyDh35UN+UQH0e2605gt3nN3nw3FiQJFwFF1bKeQ7k5ByWkuGQI68XtFVhs+
2WfqL3ftERkKzUOy/WoSJX/C9owvhMcpAuHDGOIlFwguNGroZivOMVnACG1AI3I=
=9Mgw
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull first set of KVM updates from Paolo Bonzini:
"PPC:
- minor code cleanups
x86:
- PCID emulation and CR3 caching for shadow page tables
- nested VMX live migration
- nested VMCS shadowing
- optimized IPI hypercall
- some optimizations
ARM will come next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (85 commits)
kvm: x86: Set highest physical address bits in non-present/reserved SPTEs
KVM/x86: Use CC_SET()/CC_OUT in arch/x86/kvm/vmx.c
KVM: X86: Implement PV IPIs in linux guest
KVM: X86: Add kvm hypervisor init time platform setup callback
KVM: X86: Implement "send IPI" hypercall
KVM/x86: Move X86_CR4_OSXSAVE check into kvm_valid_sregs()
KVM: x86: Skip pae_root shadow allocation if tdp enabled
KVM/MMU: Combine flushing remote tlb in mmu_set_spte()
KVM: vmx: skip VMWRITE of HOST_{FS,GS}_BASE when possible
KVM: vmx: skip VMWRITE of HOST_{FS,GS}_SEL when possible
KVM: vmx: always initialize HOST_{FS,GS}_BASE to zero during setup
KVM: vmx: move struct host_state usage to struct loaded_vmcs
KVM: vmx: compute need to reload FS/GS/LDT on demand
KVM: nVMX: remove a misleading comment regarding vmcs02 fields
KVM: vmx: rename __vmx_load_host_state() and vmx_save_host_state()
KVM: vmx: add dedicated utility to access guest's kernel_gs_base
KVM: vmx: track host_state.loaded using a loaded_vmcs pointer
KVM: vmx: refactor segmentation code in vmx_save_host_state()
kvm: nVMX: Fix fault priority for VMX operations
kvm: nVMX: Fix fault vector for VMX operation at CPL > 0
...
Merge L1 Terminal Fault fixes from Thomas Gleixner:
"L1TF, aka L1 Terminal Fault, is yet another speculative hardware
engineering trainwreck. It's a hardware vulnerability which allows
unprivileged speculative access to data which is available in the
Level 1 Data Cache when the page table entry controlling the virtual
address, which is used for the access, has the Present bit cleared or
other reserved bits set.
If an instruction accesses a virtual address for which the relevant
page table entry (PTE) has the Present bit cleared or other reserved
bits set, then speculative execution ignores the invalid PTE and loads
the referenced data if it is present in the Level 1 Data Cache, as if
the page referenced by the address bits in the PTE was still present
and accessible.
While this is a purely speculative mechanism and the instruction will
raise a page fault when it is retired eventually, the pure act of
loading the data and making it available to other speculative
instructions opens up the opportunity for side channel attacks to
unprivileged malicious code, similar to the Meltdown attack.
While Meltdown breaks the user space to kernel space protection, L1TF
allows to attack any physical memory address in the system and the
attack works across all protection domains. It allows an attack of SGX
and also works from inside virtual machines because the speculation
bypasses the extended page table (EPT) protection mechanism.
The assoicated CVEs are: CVE-2018-3615, CVE-2018-3620, CVE-2018-3646
The mitigations provided by this pull request include:
- Host side protection by inverting the upper address bits of a non
present page table entry so the entry points to uncacheable memory.
- Hypervisor protection by flushing L1 Data Cache on VMENTER.
- SMT (HyperThreading) control knobs, which allow to 'turn off' SMT
by offlining the sibling CPU threads. The knobs are available on
the kernel command line and at runtime via sysfs
- Control knobs for the hypervisor mitigation, related to L1D flush
and SMT control. The knobs are available on the kernel command line
and at runtime via sysfs
- Extensive documentation about L1TF including various degrees of
mitigations.
Thanks to all people who have contributed to this in various ways -
patches, review, testing, backporting - and the fruitful, sometimes
heated, but at the end constructive discussions.
There is work in progress to provide other forms of mitigations, which
might be less horrible performance wise for a particular kind of
workloads, but this is not yet ready for consumption due to their
complexity and limitations"
* 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
x86/microcode: Allow late microcode loading with SMT disabled
tools headers: Synchronise x86 cpufeatures.h for L1TF additions
x86/mm/kmmio: Make the tracer robust against L1TF
x86/mm/pat: Make set_memory_np() L1TF safe
x86/speculation/l1tf: Make pmd/pud_mknotpresent() invert
x86/speculation/l1tf: Invert all not present mappings
cpu/hotplug: Fix SMT supported evaluation
KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry
x86/speculation: Use ARCH_CAPABILITIES to skip L1D flush on vmentry
x86/speculation: Simplify sysfs report of VMX L1TF vulnerability
Documentation/l1tf: Remove Yonah processors from not vulnerable list
x86/KVM/VMX: Don't set l1tf_flush_l1d from vmx_handle_external_intr()
x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d
x86: Don't include linux/irq.h from asm/hardirq.h
x86/KVM/VMX: Introduce per-host-cpu analogue of l1tf_flush_l1d
x86/irq: Demote irq_cpustat_t::__softirq_pending to u16
x86/KVM/VMX: Move the l1tf_flush_l1d test to vmx_l1d_flush()
x86/KVM/VMX: Replace 'vmx_l1d_flush_always' with 'vmx_l1d_flush_cond'
x86/KVM/VMX: Don't set l1tf_flush_l1d to true from vmx_l1d_flush()
cpu/hotplug: detect SMT disabled by BIOS
...
Remove open-coded uses of set instructions to use CC_SET()/CC_OUT() in
arch/x86/kvm/vmx.c.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
[Mark error paths as unlikely while touching this. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The host's FS.base and GS.base rarely change, e.g. ~0.1% of host/guest
swaps on my system. Cache the last value written to the VMCS and skip
the VMWRITE to the associated VMCS fields when loading host state if
the value hasn't changed since the last VMWRITE.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On a 64-bit host, FS.sel and GS.sel are all but guaranteed to be 0,
which in turn means they'll rarely change. Skip the VMWRITE for the
associated VMCS fields when loading host state if the selector hasn't
changed since the last VMWRITE.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The HOST_{FS,GS}_BASE fields are guaranteed to be written prior to
VMENTER, by way of vmx_prepare_switch_to_guest(). Initialize the
fields to zero for 64-bit kernels instead of pulling the base values
from their respective MSRs. In addition to eliminating two RDMSRs,
vmx_prepare_switch_to_guest() can safely assume the initial value of
the fields is zero in all cases.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make host_state a property of a loaded_vmcs so that it can be
used as a cache of the VMCS fields, e.g. to lazily VMWRITE the
corresponding VMCS field. Treating host_state as a cache does
not work if it's not VMCS specific as the cache would become
incoherent when switching between vmcs01 and vmcs02.
Move vmcs_host_cr3 and vmcs_host_cr4 into host_state.
Explicitly zero out host_state when allocating a new VMCS for a
loaded_vmcs. Unlike the pre-existing vmcs_host_cr{3,4} usage,
the segment information is not guaranteed to be (re)initialized
when running a new nested VMCS, e.g. HOST_FS_BASE is not written
in vmx_set_constant_host_state().
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove fs_reload_needed and gs_ldt_reload_needed from host_state
and instead compute whether we need to reload various state at
the time we actually do the reload. The state that is tracked
by the *_reload_needed variables is not any more volatile than
the trackers themselves.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
prepare_vmcs02() has an odd comment that says certain fields are
"not in vmcs02". AFAICT the intent of the comment is to document
that various VMCS fields are not handled by prepare_vmcs02(),
e.g. HOST_{FS,GS}_{BASE,SELECTOR}. While technically true, the
comment is misleading, e.g. it can lead the reader to think that
KVM never writes those fields to vmcs02.
Remove the comment altogether as the handling of FS and GS is
not specific to nested VMX, and GUEST_PML_INDEX has been written
by prepare_vmcs02() since commit "4e59516a12a6 (kvm: vmx: ensure
VMCS is current while enabling PML)"
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the vmx_load_host_state() wrapper is gone, i.e. the only
time we call the core functions is when we're actually about to
switch between guest/host, rename the functions that handle lazy
state switching to vmx_prepare_switch_to_{guest,host}_state() to
better document the full extent of their functionality.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When lazy save/restore of MSR_KERNEL_GS_BASE was introduced[1], the
MSR was intercepted in all modes and was only restored for the host
when the guest is in 64-bit mode. So at the time, going through the
full host restore prior to accessing MSR_KERNEL_GS_BASE was necessary
to load host state and was not a significant waste of cycles.
Later, MSR_KERNEL_GS_BASE interception was disabled for a 64-bit
guest[2], and then unconditionally saved/restored for the host[3].
As a result, loading full host state is overkill for accesses to
MSR_KERNEL_GS_BASE, and completely unnecessary when the guest is
not in 64-bit mode.
Add a dedicated utility to read/write the guest's MSR_KERNEL_GS_BASE
(outside of the save/restore flow) to minimize the overhead incurred
when accessing the MSR. When setting EFER, only decache the MSR if
the new EFER will disable long mode.
Removing out-of-band usage of vmx_load_host_state() also eliminates,
or at least reduces, potential corner cases in its usage, which in
turn will (hopefuly) make it easier to reason about future changes
to the save/restore flow, e.g. optimization of saving host state.
[1] commit 44ea2b1758 ("KVM: VMX: Move MSR_KERNEL_GS_BASE out of the vmx
autoload msr area")
[2] commit 5897297bc2 ("KVM: VMX: Don't intercept MSR_KERNEL_GS_BASE")
[3] commit c8770e7ba6 ("KVM: VMX: Fix host userspace gsbase corruption")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using 'struct loaded_vmcs*' to track whether the CPU registers
contain host or guest state kills two birds with one stone.
1. The (effective) boolean host_state.loaded is poorly named.
It does not track whether or not host state is loaded into
the CPU registers (which most readers would expect), but
rather tracks if host state has been saved AND guest state
is loaded.
2. Using a loaded_vmcs pointer provides a more robust framework
for the optimized guest/host state switching, especially when
consideration per-VMCS enhancements. To that end, WARN_ONCE
if we try to switch to host state with a different VMCS than
was last used to save host state.
Resolve an occurrence of the new WARN by setting loaded_vmcs after
the call to vmx_vcpu_put() in vmx_switch_vmcs().
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use local variables in vmx_save_host_state() to temporarily track
the selector and base values for FS and GS, and reorganize the
code so that the 64-bit vs 32-bit portions are contained within
a single #ifdef. This refactoring paves the way for future patches
to modify the updating of VMCS state with minimal changes to the
code, and (hopefully) simplifies resolving a likely conflict with
another in-flight patch[1] by being the whipping boy for future
patches.
[1] https://www.spinics.net/lists/kvm/msg171647.html
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When checking emulated VMX instructions for faults, the #UD for "IF
(not in VMX operation)" should take precedence over the #GP for "ELSIF
CPL > 0."
Suggested-by: Eric Northup <digitaleric@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fault that should be raised for a privilege level violation is #GP
rather than #UD.
Fixes: 727ba748e1 ("kvm: nVMX: Enforce cpl=0 for VMX instructions")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Register tlb_remote_flush callback for vmx when hyperv capability of
nested guest mapping flush is detected. The interface can help to
reduce overhead when flush ept table among vcpus for nested VM. The
tradition way is to send IPIs to all affected vcpus and executes
INVEPT on each vcpus. It will trigger several vmexits for IPI
and INVEPT emulation. Hyper-V provides such hypercall to do
flush for all vcpus and call the hypercall when all ept table
pointers of single VM are same.
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds support for storing multiple previous CR3/root_hpa pairs maintained
as an LRU cache, so that the lockless CR3 switch path can be used when
switching back to any of them.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This needs a minor bug fix. The updated patch is as follows.
Thanks,
Junaid
------------------------------------------------------------------------------
kvm_mmu_invlpg() and kvm_mmu_invpcid_gva() only need to flush the TLB
entries for the specific guest virtual address, instead of flushing all
TLB entries associated with the VM.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the guest indicates that the TLB doesn't need to be flushed in a
CR3 switch, we can also skip resyncing the shadow page tables since an
out-of-sync shadow page table is equivalent to an out-of-sync TLB.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When PCIDs are enabled, the MSb of the source operand for a MOV-to-CR3
instruction indicates that the TLB doesn't need to be flushed.
This change enables this optimization for MOV-to-CR3s in the guest
that have been intercepted by KVM for shadow paging and are handled
within the fast CR3 switch path.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement support for INVPCID in shadow paging mode as well.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the implicit flush from the set_cr3 handlers, so that the
callers are able to decide whether to flush the TLB or not.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the fast CR3 switch mechanism to locklessly change the MMU root
page when switching between L1 and L2. The switch from L2 to L1 should
always go through the fast path, while the switch from L1 to L2 should
go through the fast path if L1's CR3/EPTP for L2 hasn't changed
since the last time.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No functionality change.
This is done as a preparation for VMCS shadowing virtualization.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No functionality change.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expose VMCS shadowing to L1 as a VMX capability of the virtual CPU,
whether or not VMCS shadowing is supported by the physical CPU.
(VMCS shadowing emulation)
Shadowed VMREADs and VMWRITEs from L2 are handled by L0, without a
VM-exit to L1.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is done as a preparation for VMCS shadowing emulation.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is done as a preparation to VMCS shadowing emulation.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The shadow vmcs12 cannot be flushed on KVM_GET_NESTED_STATE,
because at that point guest memory is assumed by userspace to
be immutable. Capture the cache in vmx_get_nested_state, adding
another page at the end if there is an active shadow vmcs12.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is done is done as a preparation to VMCS shadowing emulation.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel SDM considers these checks to be part of
"Checks on Guest Non-Register State".
Note that it is legal for vmcs->vmcs_link_pointer to be -1ull
when VMCS shadowing is enabled. In this case, any VMREAD/VMWRITE to
shadowed-field sets the ALU flags for VMfailInvalid (i.e. CF=1).
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No functionality change.
This is done as a preparation for VMCS shadowing emulation.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No functionality change.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For nested virtualization L0 KVM is managing a bit of state for L2 guests,
this state can not be captured through the currently available IOCTLs. In
fact the state captured through all of these IOCTLs is usually a mix of L1
and L2 state. It is also dependent on whether the L2 guest was running at
the moment when the process was interrupted to save its state.
With this capability, there are two new vcpu ioctls: KVM_GET_NESTED_STATE
and KVM_SET_NESTED_STATE. These can be used for saving and restoring a VM
that is in VMX operation.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jim Mattson <jmattson@google.com>
[karahmed@ - rename structs and functions and make them ready for AMD and
address previous comments.
- handle nested.smm state.
- rebase & a bit of refactoring.
- Merge 7/8 and 8/8 into one patch. ]
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the vCPU enters system management mode while running a nested guest,
RSM starts processing the vmentry while still in SMM. In that case,
however, the pages pointed to by the vmcs12 might be incorrectly
loaded from SMRAM. To avoid this, delay the handling of the pages
until just before the next vmentry. This is done with a new request
and a new entry in kvm_x86_ops, which we will be able to reuse for
nested VMX state migration.
Extracted from a patch by Jim Mattson and KarimAllah Ahmed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux does not support Memory Protection Extensions (MPX) in the
kernel itself, thus the BNDCFGS (Bound Config Supervisor) MSR will
always be zero in the KVM host, i.e. RDMSR in vmx_save_host_state()
is superfluous. KVM unconditionally sets VM_EXIT_CLEAR_BNDCFGS,
i.e. BNDCFGS will always be zero after VMEXIT, thus manually loading
BNDCFGS is also superfluous.
And in the event the MPX kernel support is added (unlikely given
that MPX for userspace is in its death throes[1]), BNDCFGS will
likely be common across all CPUs[2], and at the least shouldn't
change on a regular basis, i.e. saving the MSR on every VMENTRY is
completely unnecessary.
WARN_ONCE in hardware_setup() if the host's BNDCFGS is non-zero to
document that KVM does not preserve BNDCFGS and to serve as a hint
as to how BNDCFGS likely should be handled if MPX is used in the
kernel, e.g. BNDCFGS should be saved once during KVM setup.
[1] https://lkml.org/lkml/2018/4/27/1046
[2] http://www.openwall.com/lists/kernel-hardening/2017/07/24/28
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When nested virtualization is in use, VMENTER operations from the nested
hypervisor into the nested guest will always be processed by the bare metal
hypervisor, and KVM's "conditional cache flushes" mode in particular does a
flush on nested vmentry. Therefore, include the "skip L1D flush on
vmentry" bit in KVM's suggested ARCH_CAPABILITIES setting.
Add the relevant Documentation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Bit 3 of ARCH_CAPABILITIES tells a hypervisor that L1D flush on vmentry is
not needed. Add a new value to enum vmx_l1d_flush_state, which is used
either if there is no L1TF bug at all, or if bit 3 is set in ARCH_CAPABILITIES.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
For VMEXITs caused by external interrupts, vmx_handle_external_intr()
indirectly calls into the interrupt handlers through the host's IDT.
It follows that these interrupts get accounted for in the
kvm_cpu_l1tf_flush_l1d per-cpu flag.
The subsequently executed vmx_l1d_flush() will thus be aware that some
interrupts have happened and conduct a L1d flush anyway.
Setting l1tf_flush_l1d from vmx_handle_external_intr() isn't needed
anymore. Drop it.
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Part of the L1TF mitigation for vmx includes flushing the L1D cache upon
VMENTRY.
L1D flushes are costly and two modes of operations are provided to users:
"always" and the more selective "conditional" mode.
If operating in the latter, the cache would get flushed only if a host side
code path considered unconfined had been traversed. "Unconfined" in this
context means that it might have pulled in sensitive data like user data
or kernel crypto keys.
The need for L1D flushes is tracked by means of the per-vcpu flag
l1tf_flush_l1d. KVM exit handlers considered unconfined set it. A
vmx_l1d_flush() subsequently invoked before the next VMENTER will conduct a
L1d flush based on its value and reset that flag again.
Currently, interrupts delivered "normally" while in root operation between
VMEXIT and VMENTER are not taken into account. Part of the reason is that
these don't leave any traces and thus, the vmx code is unable to tell if
any such has happened.
As proposed by Paolo Bonzini, prepare for tracking all interrupts by
introducing a new per-cpu flag, "kvm_cpu_l1tf_flush_l1d". It will be in
strong analogy to the per-vcpu ->l1tf_flush_l1d.
A later patch will make interrupt handlers set it.
For the sake of cache locality, group kvm_cpu_l1tf_flush_l1d into x86'
per-cpu irq_cpustat_t as suggested by Peter Zijlstra.
Provide the helpers kvm_set_cpu_l1tf_flush_l1d(),
kvm_clear_cpu_l1tf_flush_l1d() and kvm_get_cpu_l1tf_flush_l1d(). Make them
trivial resp. non-existent for !CONFIG_KVM_INTEL as appropriate.
Let vmx_l1d_flush() handle kvm_cpu_l1tf_flush_l1d in the same way as
l1tf_flush_l1d.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, vmx_vcpu_run() checks if l1tf_flush_l1d is set and invokes
vmx_l1d_flush() if so.
This test is unncessary for the "always flush L1D" mode.
Move the check to vmx_l1d_flush()'s conditional mode code path.
Notes:
- vmx_l1d_flush() is likely to get inlined anyway and thus, there's no
extra function call.
- This inverts the (static) branch prediction, but there hadn't been any
explicit likely()/unlikely() annotations before and so it stays as is.
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The vmx_l1d_flush_always static key is only ever evaluated if
vmx_l1d_should_flush is enabled. In that case however, there are only two
L1d flushing modes possible: "always" and "conditional".
The "conditional" mode's implementation tends to require more sophisticated
logic than the "always" mode.
Avoid inverted logic by replacing the 'vmx_l1d_flush_always' static key
with a 'vmx_l1d_flush_cond' one.
There is no change in functionality.
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
vmx_l1d_flush() gets invoked only if l1tf_flush_l1d is true. There's no
point in setting l1tf_flush_l1d to true from there again.
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
VPID for the nested vcpu is allocated at vmx_create_vcpu whenever nested
vmx is turned on with the module parameter.
However, it's only freed if the L1 guest has executed VMXON which is not
a given.
As a result, on a system with nested==on every creation+deletion of an
L1 vcpu without running an L2 guest results in leaking one vpid. Since
the total number of vpids is limited to 64k, they can eventually get
exhausted, preventing L2 from starting.
Delay allocation of the L2 vpid until VMXON emulation, thus matching its
freeing.
Fixes: 5c614b3583
Cc: stable@vger.kernel.org
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not expose the address of vmx->nested.current_vmptr to
kvm_write_guest_virt_system() as the resulting __copy_to_user()
call will trigger a WARN when CONFIG_HARDENED_USERCOPY is
enabled.
Opportunistically clean up variable names in handle_vmptrst()
to improve readability, e.g. vmcs_gva is misleading as the
memory operand of VMPTRST is plain memory, not a VMCS.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Tested-by: Peter Shier <pshier@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The slow path in vmx_l1d_flush() reads from vmx_l1d_flush_pages in order
to evict the L1d cache.
However, these pages are never cleared and, in theory, their data could be
leaked.
More importantly, KSM could merge a nested hypervisor's vmx_l1d_flush_pages
to fewer than 1 << L1D_CACHE_ORDER host physical pages and this would break
the L1d flushing algorithm: L1D on x86_64 is tagged by physical addresses.
Fix this by initializing the individual vmx_l1d_flush_pages with a
different pattern each.
Rename the "empty_zp" asm constraint identifier in vmx_l1d_flush() to
"flush_pages" to reflect this change.
Fixes: a47dd5f067 ("x86/KVM/VMX: Add L1D flush algorithm")
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJbTwvXAAoJEL/70l94x66D068H/0lNKsk33AHZGsVOr3qZJNpE
6NI746ZXurRNNZ6d64hVIBDfTI4P3lurjQmb9/GUSwvoHW0S2zMug0F59TKYQ3EO
kcX+b9LRmBkUq2h2R8XXTVkmaZ1SqwvXVVzx80T2cXAD3J3kuX6Yj+z1RO7MrXWI
ZChA3ZT/eqsGEzle+yu/YExAgbv+7xzuBNBaas7QvJE8CHZzPKYjVBEY6DAWx53L
LMq8C3NsHpJhXD6Rcq9DIyrktbDSi+xRBbYsJrhSEe0MfzmgBkkysl86uImQWZxk
/2uHUVz+85IYy3C+ZbagmlSmHm1Civb6VyVNu9K3nRxooVtmmgudsA9VYJRRVx4=
=M0K/
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Miscellaneous bugfixes, plus a small patchlet related to Spectre v2"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvmclock: fix TSC calibration for nested guests
KVM: VMX: Mark VMXArea with revision_id of physical CPU even when eVMCS enabled
KVM: irqfd: fix race between EPOLLHUP and irq_bypass_register_consumer
KVM/Eventfd: Avoid crash when assign and deassign specific eventfd in parallel.
x86/kvmclock: set pvti_cpu0_va after enabling kvmclock
x86/kvm/Kconfig: Ensure CRYPTO_DEV_CCP_DD state at minimum matches KVM_AMD
kvm: nVMX: Restore exit qual for VM-entry failure due to MSR loading
x86/kvm/vmx: don't read current->thread.{fs,gs}base of legacy tasks
KVM: VMX: support MSR_IA32_ARCH_CAPABILITIES as a feature MSR
When eVMCS is enabled, all VMCS allocated to be used by KVM are marked
with revision_id of KVM_EVMCS_VERSION instead of revision_id reported
by MSR_IA32_VMX_BASIC.
However, even though not explictly documented by TLFS, VMXArea passed
as VMXON argument should still be marked with revision_id reported by
physical CPU.
This issue was found by the following setup:
* L0 = KVM which expose eVMCS to it's L1 guest.
* L1 = KVM which consume eVMCS reported by L0.
This setup caused the following to occur:
1) L1 execute hardware_enable().
2) hardware_enable() calls kvm_cpu_vmxon() to execute VMXON.
3) L0 intercept L1 VMXON and execute handle_vmon() which notes
vmxarea->revision_id != VMCS12_REVISION and therefore fails with
nested_vmx_failInvalid() which sets RFLAGS.CF.
4) L1 kvm_cpu_vmxon() don't check RFLAGS.CF for failure and therefore
hardware_enable() continues as usual.
5) L1 hardware_enable() then calls ept_sync_global() which executes
INVEPT.
6) L0 intercept INVEPT and execute handle_invept() which notes
!vmx->nested.vmxon and thus raise a #UD to L1.
7) Raised #UD caused L1 to panic.
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Cc: stable@vger.kernel.org
Fixes: 773e8a0425
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This exit qualification was inadvertently dropped when the two
VM-entry failure blocks were coalesced.
Fixes: e79f245dde ("X86/KVM: Properly update 'tsc_offset' to represent the running guest")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we switched from doing rdmsr() to reading FS/GS base values from
current->thread we completely forgot about legacy 32-bit userspaces which
we still support in KVM (why?). task->thread.{fsbase,gsbase} are only
synced for 64-bit processes, calling save_fsgs_for_kvm() and using
its result from current is illegal for legacy processes.
There's no ARCH_SET_FS/GS prctls for legacy applications. Base MSRs are,
however, not always equal to zero. Intel's manual says (3.4.4 Segment
Loading Instructions in IA-32e Mode):
"In order to set up compatibility mode for an application, segment-load
instructions (MOV to Sreg, POP Sreg) work normally in 64-bit mode. An
entry is read from the system descriptor table (GDT or LDT) and is loaded
in the hidden portion of the segment register.
...
The hidden descriptor register fields for FS.base and GS.base are
physically mapped to MSRs in order to load all address bits supported by
a 64-bit implementation.
"
The issue was found by strace test suite where 32-bit ioctl_kvm_run test
started segfaulting.
Reported-by: Dmitry V. Levin <ldv@altlinux.org>
Bisected-by: Masatake YAMATO <yamato@redhat.com>
Fixes: 42b933b597 ("x86/kvm/vmx: read MSR_{FS,KERNEL_GS}_BASE from current->thread")
Cc: stable@vger.kernel.org
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce the 'l1tf=' kernel command line option to allow for boot-time
switching of mitigation that is used on processors affected by L1TF.
The possible values are:
full
Provides all available mitigations for the L1TF vulnerability. Disables
SMT and enables all mitigations in the hypervisors. SMT control via
/sys/devices/system/cpu/smt/control is still possible after boot.
Hypervisors will issue a warning when the first VM is started in
a potentially insecure configuration, i.e. SMT enabled or L1D flush
disabled.
full,force
Same as 'full', but disables SMT control. Implies the 'nosmt=force'
command line option. sysfs control of SMT and the hypervisor flush
control is disabled.
flush
Leaves SMT enabled and enables the conditional hypervisor mitigation.
Hypervisors will issue a warning when the first VM is started in a
potentially insecure configuration, i.e. SMT enabled or L1D flush
disabled.
flush,nosmt
Disables SMT and enables the conditional hypervisor mitigation. SMT
control via /sys/devices/system/cpu/smt/control is still possible
after boot. If SMT is reenabled or flushing disabled at runtime
hypervisors will issue a warning.
flush,nowarn
Same as 'flush', but hypervisors will not warn when
a VM is started in a potentially insecure configuration.
off
Disables hypervisor mitigations and doesn't emit any warnings.
Default is 'flush'.
Let KVM adhere to these semantics, which means:
- 'lt1f=full,force' : Performe L1D flushes. No runtime control
possible.
- 'l1tf=full'
- 'l1tf-flush'
- 'l1tf=flush,nosmt' : Perform L1D flushes and warn on VM start if
SMT has been runtime enabled or L1D flushing
has been run-time enabled
- 'l1tf=flush,nowarn' : Perform L1D flushes and no warnings are emitted.
- 'l1tf=off' : L1D flushes are not performed and no warnings
are emitted.
KVM can always override the L1D flushing behavior using its 'vmentry_l1d_flush'
module parameter except when lt1f=full,force is set.
This makes KVM's private 'nosmt' option redundant, and as it is a bit
non-systematic anyway (this is something to control globally, not on
hypervisor level), remove that option.
Add the missing Documentation entry for the l1tf vulnerability sysfs file
while at it.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20180713142323.202758176@linutronix.de
All mitigation modes can be switched at run time with a static key now:
- Use sysfs_streq() instead of strcmp() to handle the trailing new line
from sysfs writes correctly.
- Make the static key management handle multiple invocations properly.
- Set the module parameter file to RW
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20180713142322.954525119@linutronix.de
Writes to the parameter files are not serialized at the sysfs core
level, so local serialization is required.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20180713142322.873642605@linutronix.de
In preparation of allowing run time control for L1D flushing, move the
setup code to the module parameter handler.
In case of pre module init parsing, just store the value and let vmx_init()
do the actual setup after running kvm_init() so that enable_ept is having
the correct state.
During run-time invoke it directly from the parameter setter to prepare for
run-time control.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20180713142322.694063239@linutronix.de
If Extended Page Tables (EPT) are disabled or not supported, no L1D
flushing is required. The setup function can just avoid setting up the L1D
flush for the EPT=n case.
Invoke it after the hardware setup has be done and enable_ept has the
correct state and expose the EPT disabled state in the mitigation status as
well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20180713142322.612160168@linutronix.de
The VMX module parameter to control the L1D flush should become
writeable.
The MSR list is set up at VM init per guest VCPU, but the run time
switching is based on a static key which is global. Toggling the MSR list
at run time might be feasible, but for now drop this optimization and use
the regular MSR write to make run-time switching possible.
The default mitigation is the conditional flush anyway, so for extra
paranoid setups this will add some small overhead, but the extra code
executed is in the noise compared to the flush itself.
Aside of that the EPT disabled case is not handled correctly at the moment
and the MSR list magic is in the way for fixing that as well.
If it's really providing a significant advantage, then this needs to be
revisited after the code is correct and the control is writable.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20180713142322.516940445@linutronix.de
Store the effective mitigation of VMX in a status variable and use it to
report the VMX state in the l1tf sysfs file.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20180713142322.433098358@linutronix.de
If the L1D flush module parameter is set to 'always' and the IA32_FLUSH_CMD
MSR is available, optimize the VMENTER code with the MSR save list.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The IA32_FLUSH_CMD MSR needs only to be written on VMENTER. Extend
add_atomic_switch_msr() with an entry_only parameter to allow storing the
MSR only in the guest (ENTRY) MSR array.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This allows to load a different number of MSRs depending on the context:
VMEXIT or VMENTER.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
.. to help find the MSR on either the guest or host MSR list.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There is no semantic change but this change allows an unbalanced amount of
MSRs to be loaded on VMEXIT and VMENTER, i.e. the number of MSRs to save or
restore on VMEXIT or VMENTER may be different.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add the logic for flushing L1D on VMENTER. The flush depends on the static
key being enabled and the new l1tf_flush_l1d flag being set.
The flags is set:
- Always, if the flush module parameter is 'always'
- Conditionally at:
- Entry to vcpu_run(), i.e. after executing user space
- From the sched_in notifier, i.e. when switching to a vCPU thread.
- From vmexit handlers which are considered unsafe, i.e. where
sensitive data can be brought into L1D:
- The emulator, which could be a good target for other speculative
execution-based threats,
- The MMU, which can bring host page tables in the L1 cache.
- External interrupts
- Nested operations that require the MMU (see above). That is
vmptrld, vmptrst, vmclear,vmwrite,vmread.
- When handling invept,invvpid
[ tglx: Split out from combo patch and reduced to a single flag ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
336996-Speculative-Execution-Side-Channel-Mitigations.pdf defines a new MSR
(IA32_FLUSH_CMD aka 0x10B) which has similar write-only semantics to other
MSRs defined in the document.
The semantics of this MSR is to allow "finer granularity invalidation of
caching structures than existing mechanisms like WBINVD. It will writeback
and invalidate the L1 data cache, including all cachelines brought in by
preceding instructions, without invalidating all caches (eg. L2 or
LLC). Some processors may also invalidate the first level level instruction
cache on a L1D_FLUSH command. The L1 data and instruction caches may be
shared across the logical processors of a core."
Use it instead of the loop based L1 flush algorithm.
A copy of this document is available at
https://bugzilla.kernel.org/show_bug.cgi?id=199511
[ tglx: Avoid allocating pages when the MSR is available ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To mitigate the L1 Terminal Fault vulnerability it's required to flush L1D
on VMENTER to prevent rogue guests from snooping host memory.
CPUs will have a new control MSR via a microcode update to flush L1D with a
single MSR write, but in the absence of microcode a fallback to a software
based flush algorithm is required.
Add a software flush loop which is based on code from Intel.
[ tglx: Split out from combo patch ]
[ bpetkov: Polish the asm code ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add a mitigation mode parameter "vmentry_l1d_flush" for CVE-2018-3620, aka
L1 terminal fault. The valid arguments are:
- "always" L1D cache flush on every VMENTER.
- "cond" Conditional L1D cache flush, explained below
- "never" Disable the L1D cache flush mitigation
"cond" is trying to avoid L1D cache flushes on VMENTER if the code executed
between VMEXIT and VMENTER is considered safe, i.e. is not bringing any
interesting information into L1D which might exploited.
[ tglx: Split out from a larger patch ]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If the L1TF CPU bug is present we allow the KVM module to be loaded as the
major of users that use Linux and KVM have trusted guests and do not want a
broken setup.
Cloud vendors are the ones that are uncomfortable with CVE 2018-3620 and as
such they are the ones that should set nosmt to one.
Setting 'nosmt' means that the system administrator also needs to disable
SMT (Hyper-threading) in the BIOS, or via the 'nosmt' command line
parameter, or via the /sys/devices/system/cpu/smt/control. See commit
05736e4ac1 ("cpu/hotplug: Provide knobs to control SMT").
Other mitigations are to use task affinity, cpu sets, interrupt binding,
etc - anything to make sure that _only_ the same guests vCPUs are running
on sibling threads.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
