The code will be called MEDIA_BUS_FMT_Y10_2X8_PADHI_LE.
It is similar to MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE
but MEDIA_BUS_FMT_Y10_2X8_PADHI_LE describes grayscale
data.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The ycbcr_enc, quantization and xfer_func fields are __u16 and not enums.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The v4l2_mbus_fmt width and height corresponds directly with the
v4l2_pix_format definitions, yet the differences in documentation make
it ambiguous what to do in the event of field heights.
Clarify this using the same text as is provided for the v4l2_pix_format
which is explicit on the matter, and by matching the terminology of
'image height' rather than the misleading 'frame height'.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sphinx 1.6 generates some LaTeX code before each table,
starting its own environment before calling tabulary,
apparently to improve table layout.
The problem is that such environment is incompatible with
adjustbox. While, in thesis, it should be possible to override
it or to redefine tabulary, I was unable to produce such patch.
Also, that would likely break on some future Sphinx version.
So, instead, let's just change the font size on bigger tables,
in order for them to fit into the page size. That is not as
good as adjustbox, and require some manual work, but it should
be less sensitive to Sphinx changes.
While here, adjust a few other tables whose text is exceeding
the cell boundaries.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJZDHJ4AAoJEAhfPr2O5OEVdwAP/jAmT+Bu7gXfgcrrmHNpivx4
knyyGlmpoazPT4WbNvBkqCdYESXpJowQgzOMagRi2zSEqnylCgAFvZ/CF6imGJDd
0r1ahK6JE9sBSw2Y531h8t7IESmEFaDCOdg4W91lCMa76goZoSjWTDhv6xx1nQId
d77lHhbAKctQI7VdBA1KlCdrvn5QKmNKsJHMGWJbXv/zNWube8Lk6ZAeqJ2Q2Efk
yzrjQiXpYKVcG6tnI6BSp+rkzRYshO7vs+xw37RcCPfzf9YgHd9Olp9FDegzmRrd
gJ1UudEpGPFZ6RIiOJLUkurPEdfAiSVMUG7jEimgRwsu0+QEURuVHF0HiTA2XjVX
5jKJSobOQQzc14b1d42eIMDBsqEP2/Bll4BBjy7VHzyAcxh3Jpo8Fqoe0Jq/gmio
jP11RHt5XRrqPmyBoApigxffDSizqNhT+yoOr5G/2EJza/L7rH9SuGALa0OPql6o
OVJyfSit02Eco7ccrcqxp2s6fqFGXBwso6U9aSKyiG2xqXLb/g1GkacOt1TjMCHU
OnuWR/1RjizGyxoom5Y0WhnPcLEJ4x1cVtU8tuqAx2K4YhRFsH5e27gQCXPynm1Z
8yC2DA4+3w57U5uYAGUlZP6/Mo+KGVET83OtNHnmOZ8qH55CzFbp8TTF+iMMmLHm
ZkXCS1/1Iwt+ykNymFLn
=Snzj
-----END PGP SIGNATURE-----
Merge tag 'media/v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
"Media updates for v4.12-rc1:
- new driver to support mediatek jpeg in hardware codec
- rc-lirc, s5p-cec and st-cec staging drivers got promoted
- hardware histogram support for vsp1 driver
- added Virtual Media Controller driver, to make easier to test the
media controller
- added a new CEC driver (rainshadow-cec)
- removed two staging LIRC drivers for obscure hardware that are too
obsolete
- added support for Intel SR300 Depth camera
- some improvements at CEC and RC core
- lots of driver cleanups, improvements all over the tree
With this series, we're finally getting rid of the LIRC staging
driver. There's just one left (lirc_zilog), with require more care,
as part of its functionality (IR RX) is already provided by another
driver. Work in progress to convert it on the proper way"
* tag 'media/v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (304 commits)
[media] ov2640: print error if devm_*_optional*() fails
[media] atmel-isc: Fix the static checker warning
[media] ov2640: add support for MEDIA_BUS_FMT_YVYU8_2X8 and MEDIA_BUS_FMT_VYUY8_2X8
[media] ov2640: fix vflip control
[media] ov2640: fix duplicate width+height returning from ov2640_select_win()
[media] ov2640: add missing write to size change preamble
[media] ov2640: add information about DSP register 0xc7
[media] ov2640: improve banding filter register definitions/documentation
[media] ov2640: fix init sequence alignment
[media] ov2640: make GPIOLIB an optional dependency
[media] xc5000: fix spelling mistake: "calibration"
[media] vidioc-queryctrl.rst: fix menu/int menu references
[media] media-entity: only call dev_dbg_obj if mdev is not NULL
[media] pixfmt-meta-vsp1-hgo.rst: remove spurious '-'
[media] mtk-vcodec: avoid warnings because of empty macros
[media] coda: bump maximum number of internal framebuffers to 17
[media] media: mtk-vcodec: remove informative log
[media] subdev-formats.rst: remove spurious '-'
[media] dw2102: limit messages to buffer size
[media] ttusb2: limit messages to buffer size
...
-----BEGIN PGP SIGNATURE-----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=UxFF
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux
Pull drm u pdates from Dave Airlie:
"This is the main drm pull request for v4.12. Apart from two fixes
pulls, everything should have been in drm-next for at least 2 weeks.
The biggest thing in here is AMD released the public headers for their
upcoming VEGA GPUs. These as always are quite a sizeable chunk of
header files. They've also added initial non-display support for those
GPUs, though they aren't available in production yet.
Otherwise it's pretty much normal.
New bridge drivers:
- megachips-stdpxxxx-ge-b850v3-fw LVDS->DP++
- generic LVDS bridge support.
Core:
- Displayport link train failure reporting to userspace
- debugfs interface cleaned up
- subsystem TODO in kerneldoc now
- Extended fbdev support (flipping and vblank wait)
- drm_platform removed
- EDP CRC support in helper
- HF-VSDB SCDC support in EDID parser
- Lots of code cleanups and header extraction
- Thunderbolt external GPU awareness
- Atomic helper improvements
- Documentation improvements
panel:
- Sitronix and Samsung new panel support
amdgpu:
- Preliminary vega10 support
- Multi-level page table support
- GPU sensor support for userspace
- PRT support for sparse buffers
- SR-IOV improvements
- Non-contig VRAM CPU mapping
i915:
- Atomic modesetting enabled by default on Gen5+
- LSPCON improvements
- Atomic state handling for cdclk
- GPU reset improvements
- In-kernel unit tests
- Geminilake improvements and color manager support
- Designware i2c fixes
- vblank evasion improvements
- Hotplug safe connector iterators
- GVT scheduler QoS support
- GVT Kabylake support
nouveau:
- Acceleration support for Pascal (GP10x).
- Rearchitecture of code handling proprietary signed firmware
- Fix GTX 970 with odd MMU configuration
- GP10B support
- GP107 acceleration support
vmwgfx:
- Atomic modesetting support for vmwgfx
omapdrm:
- Support for render nodes
- Refactor omapdss code
- Fix some probe ordering issues
- Fix too dark RGB565 rendering
sunxi:
- prelim rework for multiple pipes.
mali-dp:
- Color management support
- Plane scaling
- Power management improvements
imx-drm:
- Prefetch Resolve Engine/Gasket on i.MX6QP
- Deferred plane disabling
- Separate alpha support
mediatek:
- Mediatek SoC MT2701 support
rcar-du:
- Gen3 HDMI support
msm:
- 4k support for newer chips
- OPP bindings for gpu
- prep work for per-process pagetables
vc4:
- HDMI audio support
- fixes
qxl:
- minor fixes.
dw-hdmi:
- PHY improvements
- CSC fixes
- Amlogic GX SoC support"
* tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux: (1778 commits)
drm/nouveau/fb/gf100-: Fix 32 bit wraparound in new ram detection
drm/nouveau/secboot/gm20b: fix the error return code in gm20b_secboot_tegra_read_wpr()
drm/nouveau/kms: Increase max retries in scanout position queries.
drm/nouveau/bios/bitP: check that table is long enough for optional pointers
drm/nouveau/fifo/nv40: no ctxsw for pre-nv44 mpeg engine
drm: mali-dp: use div_u64 for expensive 64-bit divisions
drm/i915: Confirm the request is still active before adding it to the await
drm/i915: Avoid busy-spinning on VLV_GLTC_PW_STATUS mmio
drm/i915/selftests: Allocate inode/file dynamically
drm/i915: Fix system hang with EI UP masked on Haswell
drm/i915: checking for NULL instead of IS_ERR() in mock selftests
drm/i915: Perform link quality check unconditionally during long pulse
drm/i915: Fix use after free in lpe_audio_platdev_destroy()
drm/i915: Use the right mapping_gfp_mask for final shmem allocation
drm/i915: Make legacy cursor updates more unsynced
drm/i915: Apply a cond_resched() to the saturated signaler
drm/i915: Park the signaler before sleeping
drm: mali-dp: Check the mclk rate and allow up/down scaling
drm: mali-dp: Enable image enhancement when scaling
drm: mali-dp: Add plane upscaling support
...
Remove spurious duplicate '-' in the Bayer Formats description. This resulted in a
weird dot character that also caused the row to be double-height.
The - character was probably used originally as indicator of an unused bit, but as the
number of columns was increased it was never used for the new columns.
Other tables do not use '-' either, so just remove it.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add documentation for added Bus Formats to describe RGB and YUV formats used
as input to the Synopsys DesignWare HDMI TX Controller.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491230558-10804-4-git-send-email-narmstrong@baylibre.com
Now that we have an extension to handle images, use it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
SVG images are scalable, with makes easier to output on
different formats.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The PDF files that contain media images were actually generated
offline from their SVG or PNG source files.
Sphinx can handle PNG sources automatially. So, let's just
drop their PDF counterparts.
For SVG, however, Sphinx doesn't produce the right tags to
use the TexLive SVG support. Also, the SVG support is done via
shell execution, with is not nice.
So, while we don't have any support for SVG inside Sphinx
core or as an extension, move the logic to build them to Makefile,
producing the PDF images on runtime.
NOTE: due to the way Sphinx works, the PDF images should be
generated inside the Kernel source tree, as otherwise Sphinx
won't find it, not obeying what's specified by "O=" makefile
parameter.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
There are several missing columns on the size specification,
causing LaTeX to complain on interactive mode.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
adjustbox doesn't work on longtables. Also, this
causes an error on LaTeX in interactive mode.
So, use, instead, a tiny font.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The codes will be called:
MEDIA_BUS_FMT_SBGGR16_1X16
MEDIA_BUS_FMT_SGBRG16_1X16
MEDIA_BUS_FMT_SGRBG16_1X16
MEDIA_BUS_FMT_SRGGB16_1X16
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are several broken references there, due to the conversion to
C domain. Fix them using this shell script and manually adjust what's
broken:
# funcs is a file with the broken functions/references
for i in $(cat funcs|sort|uniq|perl -ne 'print "$1\n" if (m/(\S+)$/)'); do
i=${i//-/_}
echo $i
j=${i//_/-}
for k in $(git grep -l "_$j:" Documentation/); do
sed s,\_$j\:,"c\:type\:\: $i", <$k >a && mv a $k
done
for k in $(git grep -l "$j" Documentation/media/*.exceptions); do
sed s,$j,":c\:type\:\`$i\`", <$k >a && mv a $k
done
for k in $(git grep -l "$j" Documentation/); do
sed "s,:ref:\`$i <$j>\`,:c:type:\`$i\`," <$k >a && mv a $k
sed "s,:ref:\`$j\`,:c:type:\`$i\`," <$k >a && mv a $k
sed -E "s,:ref:\`(.*)<$j>\`,:c:type:\`\1<$i>\`," <$k >a && mv a $k
done
for k in $(git grep -l "<$j>" include/media); do
sed -E "s,:ref:\`(.*)<$j>\`,enum \&$i," <$k >a && mv a $k
done
done
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Change the parse-headers.pl and the corresponding files to use
the C domain for enum references.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are several minor issues that are seen when building
PDF on interactive mode.
Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are two big tables here that are very hard to adjust its
size.
The first one would fit into one page, but the latex.py logic
at Sphinx auto-switches to longtable when there are more than 30
rows. There's no way to override without coding.
The second one is really big, and won't fit on a single page.
So, it has to use tiny font to fit.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sphinx is really pedantic with respect to the order where
table tags and references are created. Putting things at
the wrong order causes troubles.
The order that seems to work is:
.. raw:: latex
.. tabularcolumns::
.. _foo_name:
.. cssclass: longtable
.. flat-table::
Reorder the tags to the above order, to avoid troubles, and
fix remaining warnings introduced by media recent patches.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix mosto fo the tables there in order to make them fit at the
page size.
There are, however, two exceptions: RGB and YUV big tables,
where adding the raw latex adjustbox caused the tables to not
be properly formatted. I suspect that the problem is because
those are long tables, but not really sure.
The thing is that Sphinx lacks an "adjustbox" tag that would
avoid the raw latex hacks.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
LaTeX doesn't handle too well auto-width on tables, and ReST
markup requires an special tag to give it the needed hints.
As we're using A4 paper, we have 17cm of useful spaces. As
most media tables have widths, let's use it to generate the
needed via the following perl script:
my ($line_size, $table_header, $has_cols) = (17.5, 0, 0);
my $out;
my $header = "";
my @widths = ();
sub round { $_[0] > 0 ? int($_[0] + .5) : -int(-$_[0] + .5) }
while (<>) {
if (!$table_header) {
$has_cols = 1 if (m/..\s+tabularcolumns::/);
if (m/..\s+flat-table::/) {
$table_header = 1;
$header = $_;
next;
}
$out .= $_;
next;
}
$header .= $_;
@widths = split(/ /, $1) if (m/:widths:\s+(.*)/);
if (m/^\n$/) {
if (!$has_cols && @widths) {
my ($tot, $t, $i) = (0, 0, 0);
foreach my $v(@widths) { $tot += $v; };
$out .= ".. tabularcolumns:: |";
for ($i = 0; $i < scalar @widths - 1; $i++) {
my $v = $widths[$i];
my $w = round(10 * ($v * $line_size) / $tot) / 10;
$out .= sprintf "p{%.1fcm}|", $w;
$t += $w;
}
my $w = $line_size - $t;
$out .= sprintf "p{%.1fcm}|\n\n", $w;
}
$out .= $header;
$table_header = 0;
$has_cols = 0;
$header = "";
@widths = ();
}
}
print $out;
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This patch touches on places where it shouldn't: image
files and code examples. Also, it doesn't fix all array
occurrences.
So, let's revert it.
This reverts commit ffbab694ed.
Those characters are used for citations. Better to escape, to
avoid them to be misinterpreted.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The name of the subsystem is "media", and not "linux_tv". Also,
as we plan to add other stuff there in the future, let's
rename also the media uAPI book to media_uapi, to make it
clearer.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
