Commit Graph

237 Commits

Author SHA1 Message Date
Russell King
ac1d426e82 Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/Kconfig
	arch/arm/include/asm/system.h
	arch/arm/mm/Kconfig
2010-05-17 17:24:04 +01:00
Russell King
c39e52a793 Merge branches 'at91', 'bcmring', 'ep93xx', 'iop', 'misc', 'nomadik', 'omap', 'pxa', 'spear' and 'versatile' into devel
Conflicts:
	arch/arm/Makefile
	arch/arm/common/Makefile
	arch/arm/mm/Kconfig
2010-05-17 11:53:39 +01:00
Jassi Brar
75070612c4 ARM: 6132/1: PL330: Add common core driver
PL330 is a configurable DMA controller PrimeCell device.
The register map of the device is well defined.
The configuration of a particular implementation can be
read from the six configuration registers CR0-4,Dn.

This patch implements a driver for the specification:-
http://infocenter.arm.com/help/topic/com.arm.doc.ddi0424a/DDI0424A_dmac_pl330_r0p0_trm.pdf

The exported interface should be sufficient to implement
a driver for any DMA API.

Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15 15:03:50 +01:00
Russell King
c5a0adb510 ARM: ICST: kill duplicate icst code
The only difference between ICST307 and ICST525 are the two arrays
for calculating the S parameter; the code is now identical.  Merge
the two files and kill the duplicated code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:33 +01:00
Russell King
232eaf7f26 ARM: ICST: indirect s2div and idx2s arrays via icst_params
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:32 +01:00
Russell King
e73a46a3d3 ARM: ICST: move minimum VCO frequency to icst_params
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:31 +01:00
Russell King
64fceb1dcd ARM: ICST: use Hz instead of kHz
This makes the ICST support fit more nicely with the clk API,
eliminating the need to *1000 and /1000 in places.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:31 +01:00
Russell King
4de2edbd15 ARM: ICST: provide definitions for max/min VCO frequencies
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:30 +01:00
Russell King
643761ac43 ARM: ICST: icst.*_ps_to_vco() functions are unused, remove them
These functions were originally implemented for the CLCD driver before
we had clk API support.  Since the CLCD driver does not use these
anymore, we can remove them.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:30 +01:00
Russell King
39c0cb02db ARM: ICST: merge common ICST VCO structures
The structures for the ICST307 and ICST525 VCO devices are
identical, so merge them together.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:29 +01:00
Hartley Sweeten
b0c4c89883 ARM: 6025/1: vic: factor out common init code
This factors out the common initialization code for the two vic
vendors into easier maintainable functions.

Tested-by: Linus Walleij <linus.walleij@stericsson.com>
Tested-by: Alessandro Rubini <rubini@unipv.it>
Cc: Andrea Gallo <andrea.gallo@stericsson.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:19:23 +01:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
H Hartley Sweeten
c8c3dcb9df [ARM] locomo: fix unpaired spin_lock_irqsave
The function locomo_m62332_senddata sends a three byte i2c message to
a M62332 DAC. This entire function is guarded with a spin_lock_irqsave
at the start of the function and a spin_unlock_irqrestore at the end.

As each byte is transferred, the i2c ACK from the DAC is checked.
Currently, if the ACK is missing the function simply returns without
the unlock. It also leaves the i2c bus in an invalid state since the
last byte transferred did not have a "stop" condition and leave the
bus idle.

Fix this by adding an exit path using goto.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:09 +08:00
H Hartley Sweeten
1b0d76cb9d [ARM] locomo: fix SPI register offset
The locomo spi registers are all defined in locomo.h as offsets
from the first spi register LOCOMO_SPI (0x60), which is itself
an offset from the locomo base address.  To correctly access
these registers LOCOMO_SPI must always be included in the
address calculation.

There are two places in locomo.c where this is not done.  The
first one, in locomo_suspend, actually results in a write to
LOCOMO_ST instead of LOCOMO_SPICT.  The second is in __locomo_probe
and results in a write to LOCOMO_MCSX2 instead of LOCOMO_SPIIE.

Fix these by including LOCOMO_SPI in the calculation.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:08 +08:00
viresh kumar
e4bf5beccc ARM: 5979/1: CLKDEV: return from clk_find as soon as we get maching clk
clk_find function looks for clock with matching dev_id and con_id.
We should return from clk_find as soon as we get a clock with matching
dev_id and con_id. This can be done by comparing variable "match" with 3.

Acked-by: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-19 16:58:51 +00:00
Russell King
0deac0bf66 ARM: Arrange for COMMON_CLKDEV to select HAVE_CLK
If support for COMMON_CLKDEV is enabled, we have CLK support.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-19 16:58:30 +00:00
Linus Torvalds
c32da02342 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits)
  doc: fix typo in comment explaining rb_tree usage
  Remove fs/ntfs/ChangeLog
  doc: fix console doc typo
  doc: cpuset: Update the cpuset flag file
  Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed
  Remove drivers/parport/ChangeLog
  Remove drivers/char/ChangeLog
  doc: typo - Table 1-2 should refer to "status", not "statm"
  tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments
  No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h
  devres/irq: Fix devm_irq_match comment
  Remove reference to kthread_create_on_cpu
  tree-wide: Assorted spelling fixes
  tree-wide: fix 'lenght' typo in comments and code
  drm/kms: fix spelling in error message
  doc: capitalization and other minor fixes in pnp doc
  devres: typo fix s/dev/devm/
  Remove redundant trailing semicolons from macros
  fix typo "definetly" -> "definitely" in comment
  tree-wide: s/widht/width/g typo in comments
  ...

Fix trivial conflict in Documentation/laptops/00-INDEX
2010-03-12 16:04:50 -08:00
Linus Torvalds
dca1d9f6d7 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits)
  ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock
  ARM: S3C2443: Remove #if 0 for clk_mpll
  ARM: S3C2443: Update notes on MPLLREF clock
  ARM: S3C2443: Further clksrc-clk conversions
  ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation
  USB: Fix s3c-hsotg build following Samsung platform header moves
  ARM: S3C64XX: Reintroduce unconditional build of audio device
  ARM: 5961/1: ux500: fix CLKRST addresses
  ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted
  ASoC: Fix S3C64xx IIS driver for Samsung header reorg
  ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support
  [ARM] pxa: fix typo in mxm8x10.h
  [ARM] pxa/raumfeld: set GPIO drive bits for LED pins
  [ARM] pxa/zeus: Add support for mcp2515 CAN bus
  [ARM] pxa/zeus: Add support for onboard max6369 watchdog
  [ARM] pxa/zeus: Add Eurotech as the manufacturer
  [ARM] pxa/zeus: Correct the USB host initialisation flags
  [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
  [ARM] pxa: refactor uncompress.h for non-PXA uarts
  [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs
  ...
2010-03-12 16:00:54 -08:00
FUJITA Tomonori
6fee48cd33 dma-mapping: arm: use generic pci_set_dma_mask and pci_set_consistent_dma_mask
This converts arm to the generic pci_set_dma_mask and
pci_set_consistent_dma_mask (removes HAVE_ARCH_PCI_SET_DMA_MASK for
dmabounce).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Looked-over-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:42 -08:00
Russell King
988addf82e Merge branch 'origin' into devel-stable
Conflicts:
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-mx2/devices.h
	sound/soc/pxa/pxa-ssp.c
2010-03-08 20:21:04 +00:00
Jiri Kosina
318ae2edc3 Merge branch 'for-next' into for-linus
Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c
2010-03-08 16:55:37 +01:00
Stefan Schmidt
cfab57e0e4 [ARM] pxa: enable check_scoop_reg() only if CONFIG_PM is set.
This function gets only called from scoop_suspend() and scoop_resume() which are
only built in if we have CONFIG_PM set. Make it the same for check_scoop_reg().

This fixes the following warning:
arch/arm/common/scoop.c:143: warning: ‘check_scoop_reg’ defined but not used

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:52 +08:00
Eric Miao
19851c58e6 [ARM] sa1111: allow cascaded IRQs to be used by platforms
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:51 +08:00
Eric Miao
ac609d266e [ARM] locomo: allow cascaded IRQ base to be specified by platforms
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:50 +08:00
Eric Miao
00dd8027b9 [ARM] locomo: remove unused IRQs and avoid unnecessary cascade
IRQ_LOCOMO_* are never used elsewhere, remove these definitions. As well
as the cascade of these IRQs. IRQ_LOCOMO_*_BASE changed to IRQ_LOCOMO_*.

IRQ_LOCOMO_LT and IRQ_LOCOMO_SPI are likely to be used in a same way as
IRQ_LOCOMO_KEY.

IRQ_LOCOMO_GPIO and the demultiplex handler should really be living
somewhere else.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:49 +08:00
Eric Miao
da8065ac3e [ARM] locomo: avoid unnecessary cascaded keyboard IRQ
It is not necessary and is over-complicated for IRQ_LOCOMO_KEY to
be a cascaded IRQ of IRQ_LOCOMO_KEY_BASE. Removed and introduced
locomokbd_{open,close} for masking/unmasking of the keyboard IRQ.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:49 +08:00
Russell King
9f33be2c3a Merge branches 'clks' and 'pnx' into devel 2010-02-25 22:10:38 +00:00
Russell King
3560adf620 Merge branches 'at91', 'cache', 'cup', 'ep93xx', 'ixp4xx', 'nuc', 'pending-dma-streaming', 'u300' and 'umc' into devel 2010-02-25 22:06:43 +00:00
Russell King
18eabe2347 ARM: dma-mapping: introduce the idea of buffer ownership
The DMA API has the notion of buffer ownership; make it explicit in the
ARM implementation of this API.  This gives us a set of hooks to allow
us to deal with CPU cache issues arising from non-cache coherent DMA.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-By: Jamie Iles <jamie@jamieiles.com>
2010-02-15 15:21:43 +00:00
Russell King
0a0300dc8c ARM: Consolidate clks_register() and similar
Most machine classes want some way to register a block of clk_lookup
structures, and most do it by implementing a clks_register() type
function which walks an array, or by open-coding a loop.

Consolidate all this into clkdev_add_table().

Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 17:32:36 +00:00
Uwe Kleine-König
659431fcaf fix typos "precidence" -> "precedence" in comments
This patch was generated by

	git grep -E -i -l 'precidence' | xargs -r perl -p -i -e 's/precidence/precedence/'

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-05 12:22:39 +01:00
Hartley Sweeten
bb06b73714 ARM: 5881/1: vic.c: reorganize code
This reorganizes the vic.c code in anticipation of a second patch
to use struct vic_device as the data stored in set_irq_chip_data().

The code now has the following flow:

1) struct vic_device definition, static variables, and to_vic()
   moved to the start of the code.
2) common code (vic_init2)
3) vic power management callbacks
4) vic power management initialization/registration
5) irq_chip callbacks
6) vendor specific vic initialization
7) vic initialization

In addition the typo vik_init_st is fixed (vic_init_st).

There is no functional change with this patch.

Tested-by: Linus Walleij <linus.walleij@stericsson.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Alessandro Rubini <rubini-list@gnudd.com>

Comments from Hartley Sweeten:

 Please change from Cc to:
 Tested-by: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-20 12:28:29 +00:00
Mike Rapoport
d9fd3ab89f ARM: 5857/1: ARM: dmabounce: fix build
Commit f74f7e57ae (ARM: use
flush_kernel_dcache_area() for dmabounce) has broken dmabounce build:

  CC      arch/arm/common/dmabounce.o
arch/arm/common/dmabounce.c: In function 'unmap_single':
arch/arm/common/dmabounce.c:315: error: implicit declaration of function '__cpuc_flush_kernel_dcache_area'
make[2]: *** [arch/arm/common/dmabounce.o] Error 1

Fix it.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-22 15:32:32 +00:00
Russell King
f74f7e57ae ARM: use flush_kernel_dcache_area() for dmabounce
After copying data from the bounce buffer to the real buffer, use
flush_kernel_dcache_page() to ensure that data is written back in
manner coherent with future userspace mappings.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-14 14:53:22 +00:00
Linus Torvalds
4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
André Goddard Rosa
af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Russell King
29cb8d0d24 ARM: dma-mapping: split dma_unmap_page() from dma_unmap_single()
We will need to treat dma_unmap_page() differently from dma_unmap_single()

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-By: Jamie Iles <jamie@jamieiles.com>
2009-11-23 12:53:55 +00:00
Hartley Sweeten
0a4bc5e89c ARM: 5735/1: sa1111: CodingStyle cleanups
EXPORT_* macros should follow immediately after the closing function
brace line.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-10-02 22:32:33 +01:00
Russell King
ae19ffbadc Merge branch 'master' into for-linus 2009-09-22 21:01:40 +01:00
Hartley Sweeten
9c5e8fecc4 ARM: 5711/1: locomo.c: CodingStyle cleanups
EXPORT* macros should follow immediately after the closing function
brace line.

The prototype for locomo_chip_driver() is not needed since the static
(inline) function is located earlier in the file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-21 16:03:04 +01:00
Linus Walleij
59fcf48fde ARM: 5696/1: Include device.h in VIC driver
Currently build with the next head fails on archs using PL190
VIC because when we include amba/bus.h we need to include
device.h first.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-15 22:06:03 +01:00
Russell King
87d721ad7a Merge branch 'master' into devel 2009-09-12 12:04:37 +01:00
Linus Walleij
f17a1f06d2 ARM: 5636/1: Move vendor enum to AMBA include
This moves the primecell vendor enum definition inside vic.c
out to linux/amba/bus.h where it belongs and replace any
occurances of specific vendor ID:s with the respective enums
instead.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-12 11:51:14 +01:00
Hartley Sweeten
c0c60c4b9a ARM: 5639/1: arm: clkdev.c should include <linux/clk.h>
<linux/clk.h> should be included to get the base API prototypes.

This fixes the following sparse warnings:

  arch/arm/common/clkdev.c:65:12:
    warning: symbol 'clk_get_sys' was not declared. Should it be static?

  arch/arm/common/clkdev.c:79:12:
    warning: symbol 'clk_get' was not declared. Should it be static?

  arch/arm/common/clkdev.c:87:6:
    warning: symbol 'clk_put' was not declared. Should it be static?

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-08-05 22:06:58 +01:00
Alessandro Rubini
8c81b52422 [ARM] 5583/1: VIC: acknowledge software interrupts
The PrimeCell Vectored Interrupt Controller offers a way to trigger
any interrupt through software. This is a useful tool for developing,
but such software interrupt can only be acked by writing a bit in the
"software clear" register, or the handler will loop forever.  This
splits ack from mask, and acks the soft irq in case it was the source.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-02 21:20:44 +01:00
Alessandro Rubini
87e8824b45 [ARM] 5582/1: VIC: support ST-modified version with a split init
The Nomadik SoC (not yet merged) has a modified PL090 VIC cell. This adds
support for it by reading the PrimeCell ID at the end of the page and
calling a separate init function.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-02 21:20:43 +01:00
Catalin Marinas
41184f6a5e [ARM] 5556/1: Fix the irq_desc.cpu references
The cpu member of struct irq_desc was recently renamed to node. The
patch renames the ARM references to the old member.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-19 15:11:16 +01:00
Ben Dooks
3f1a567d8a [ARM] VIC: Fix resume sources usage
The resume_mask wasn't being checked in vic_set_wake()
to see if the IRQ was a valid wakeup source.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16 23:30:12 +01:00
Linus Torvalds
2cf4d4514d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...
2009-06-14 13:42:43 -07:00
Russell King
4c31791c3d Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2009-06-14 11:00:16 +01:00