Previously dso__synthesize_plt_symbols() was reopening the elf file to
obtain dynsyms from it. Rather than reopen the file, use the already
opened reference within the symsrc to access it.
Setup for the later patch
"perf symbols: Use both runtime and debug images"
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-14-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In certain cases, dso__load requires dso->symbol_type to be set prior to
calling it. With the introduction of symsrc*, the symtab_type is now
stored in a symsrc which is then passed to dso__load_sym().
Change dso__load_sym() to use the symtab_type from them symsrc (setting
dso->symtab_type as well).
Setup for later patch
"perf symbols: Use both runtime and debug images"
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-13-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factors opening of certain sections & tracking certain elf info into an
external structure.
The goal here is to keep multiple elfs (and their looked up
sections/indexes) around during the symbol generation process (in
dso__load()).
We need this to properly resolve symbols on PPC due to the use of
function descriptors & the .opd section (ie: symbols which are functions
don't point to their actual location, they point to their function
descriptor in .opd which contains their actual location.
It would be possible to just keep the (Elf *) around, but then we'd end
up with duplicate code for looking up the same sections and checking for
the existence of an important section wouldn't be as clean (and we need
to keep the Elf stuff confined to symtab-elf.c).
Utilized by the later patch
"perf symbols: Use both runtime and debug images"
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-12-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously, symtab_type would have been left at 0, or KALLSYMS, which is
not quite accurate.
Introduce DSO_BINARY_TYPE__VMLINUX[_GUEST].
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-11-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we call elf_section_by_name() with a truncated elf image (ie: the
file header indicates that the section headers are placed past the end
of the file), elf_strptr() causes a segfault within libelf.
Avoid this by checking that we can access the section string table
properly.
Should really be fixed in libelf/elfutils.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-10-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
dso__load_vmlinux() uses the filename passed to it to directly set the
dso long_name, which resulted in a use after free due to
dso__load_vmlinux_path() treating 0 symbols as a load failure and
subsequently freeing the contents of dso->long_name.
Change dso__load_vmlinux() so that finding 0 symbols does not cause it
to consider itself loaded, and do not set long_name in such a case.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-9-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The only site that jumps to out_fixup has (kallsyms_filename == NULL).
And all paths that reach 'if (err > 0)' without 'goto out_fixup' have
kallsyms_filename != NULL.
So skip over both the check & dso__set_long_name(), and remove the
check.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-8-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kallsyms__parse() takes a callback that is called on every discovered
symbol. As /proc/kallsyms does not supply symbol sizes, the callback was
simply called with end=start, faking the symbol size to 1.
All of the callbacks (there are 2) used in calls to kallsyms__parse()
are _only_ used as callbacks for kallsyms__parse().
Given that kallsyms__parse() lacks real information about what
end/length should be, don't make up a length in kallsyms__parse().
Instead have the callbacks handle guessing the length.
Also relocate a comment regarding symbol creation to the callback which
does symbol creation (kallsyms__parse() is not in general used to create
symbols).
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-3-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In kallsyms_parse() when calling process_symbol() (a callback argument
to kallsyms_parse()), we pass start as both start & end (ie:
start=start, end=start).
In map__process_kallsym_symbol(), the length is calculated as 'end -
start + 1', making the length 1, not 0.
Essentially, start & end define an inclusive range.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-2-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
dso__set_long_name() is already called by dso__load_vmlinux(), avoid
calling it a second time unnecessarily.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-7-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If .dynsym exists but .dynstr is empty (NO_BITS or size==0), a segfault
occurs. Avoid this by checking that .dynstr is not empty.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-6-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prelink only adjusts the addresses of non-zero symbols. Do the same when we
reverse the adjustments.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-4-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch enables perf to use the DWARF unwind code.
It extends the perf record '-g' option with following arguments:
'fp' - provides framepointer based user
stack backtrace
'dwarf[,size]' - provides DWARF (libunwind) based user stack
backtrace. The size specifies the size of the
user stack dump. If omitted it is 8192 by default.
If libunwind is found during the perf build, then the 'dwarf' argument
becomes available for record command. The 'fp' stays as default option
in any case.
Examples: (perf compiled with libunwind)
perf record -g dwarf ls
- provides dwarf unwind with 8192 as stack dump size
perf record -g dwarf,4096 ls
- provides dwarf unwind with 4096 as stack dump size
perf record -g -- ls
perf record -g fp ls
- provides frame pointer unwind
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-13-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This brings the support for DWARF cfi unwinding on perf post
processing. Call frame informations are retrieved and then passed
to libunwind that requests memory and register content from the
applications.
Adding unwind object to handle the user stack backtrace based
on the user register values and user stack dump.
The unwind object access the libunwind via remote interface
and provides to it all the necessary data to unwind the stack.
The unwind interface provides following function:
unwind__get_entries
And callback (specified in above function) to retrieve
the backtrace entries:
typedef int (*unwind_entry_cb_t)(struct unwind_entry *entry,
void *arg);
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-12-git-send-email-jolsa@redhat.com
[ Replaced use of perf_session by usage of perf_evsel ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding following info to be parsed out of the event sample:
- user register set
- user stack dump
Both are global and specific to all events within the session.
This info will be used in the unwind patches coming in shortly.
Adding simple output printout (report -D) for both register and
stack dumps.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-11-git-send-email-jolsa@redhat.com
[ Use evsel->attr.sample_regs_user ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding libunwind to be linked with perf if available. It's required
for the to get dwarf cfi unwinding support.
Also building perf with the dwarf call frame informations by default,
so that we can unwind callchains in perf itself.
Adding LIBUNWIND_DIR Makefile variable allowing user to specify
the directory with libunwind to be linked. This is used for
debug purposes.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-10-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding header files to access unified API for arch registers.
util/perf_regs.h - global perf_reg declarations
arch/x86/include/perf_regs.h - x86 arch specific
Adding perf_reg_name function to obtain register name based on the reg
ID value, and PERF_REGS_MASK macro with mask definition of all current
arch registers (will be used in unwind patches).
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-9-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement a minimal elf parser for getting build-id. It assumes that
required elf.h header is provided by libc header on the system and the
parser only looks for PT_NOTE program header to check build-id.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344228082-15569-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now we have isolated all ELF-specific stuff, it's possible to build
without libelf. The output binary can do most of jobs but lacks (user
level) symbol information - kernel symbols are still accessable thanks
to the kallsyms.
To build perf without libelf (elfutils), give NO_LIBELF=1 to make.
For now, only 'perf probe' command is removed since it depends on
libelf/libdw heavily.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344228082-15569-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out the dependency of ELF handling into separate symbol-elf.c
file. It is a preparation of building a minimalistic version perf tools
which doesn't depend on the elfutils.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344228082-15569-3-git-send-email-namhyung@kernel.org
[ committer note: removed blank line at symbol-elf.c EOF ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The symbol__elf_init() is for initializing internal libelf data
structure and getting rid of its dependency outside of ELF/symboling
handling code.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344228082-15569-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix missing /etc/bash_completion.d directory creation, otherwise
the installation fails miserably on systems that don't have bash
completion installed yet or on specific target:
$ make DESTDIR=/tmp/junk-perf O=/tmp/pbuild -C tools/perf/ install
...
install -m 755 bash_completion /tmp/junk-perf/etc/bash_completion.d/perf
install: cannot create regular file
`/tmp/junk-perf/etc/bash_completion.d/perf': No such file or directory
make: *** [install] Error 1
make: Leaving directory `/opt/sw/ahern/perf.git/tools/perf'
Also use sysconfdir variable instead of the hardcoded /etc to handle
overriden conf directory.
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1344522713-27951-4-git-send-email-fweisbec@gmail.com
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add basic bash completion for the -e option in record, top and stat
subcommands. Only hardware, software and tracepoint events are
supported.
Breakpoints, raw events and events grouping completion need more
thinking.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1344522713-27951-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If CONFIG options required for perf-lock are not enabled then the
corresponding tracepoints will not be enabled. Currently, the message to
the user is:
$ perf lock record -a -- sleep 1
invalid or unsupported event: 'lock:lock_acquire'
Run 'perf list' for a list of valid events
Improve the message with a suggestion on which CONFIG options are needed:
$ perf lock record -a -- sleep 1
tracepoint lock:lock_acquire is not enabled. Are CONFIG_LOCKDEP and CONFIG_LOCK_STAT enabled?
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1344530137-25521-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Correct the checking for handler returned by PyDict_GetItemString(),
also fix some spelling error and remove some data code in
event_analyzing_sample.py, as suggested by Namhyung Kim.
v2: restore back the wrongly removed trace_unhandled() func
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20120809134613.067104c4@feng-i7
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently only trace point events are supported in perf/python script,
the first 3 patches of this serie add the support for all types of
events. This script is just a simple sample to show how to gather the
basic information of the events and analyze them.
This script will create one object for each event sample and insert them
into a table in a database, then leverage the simple SQL commands to
sort/group them. User can modify or write their brand new functions
according to their specific requirment.
Here is the sample of how to use the script:
$ perf record -a tree
$ perf script -s process_event.py
There is 100 records in gen_events table
Statistics about the general events grouped by thread/symbol/dso:
comm number histgram
==========================================
swapper 56 ######
tree 20 #####
perf 10 ####
sshd 8 ####
kworker/7:2 4 ###
ksoftirqd/7 1 #
plugin-containe 1 #
symbol number histgram
==========================================================
native_write_msr_safe 40 ######
__lock_acquire 8 ####
ftrace_graph_caller 4 ###
prepare_ftrace_return 4 ###
intel_idle 3 ##
native_sched_clock 3 ##
Unknown_symbol 2 ##
do_softirq 2 ##
lock_release 2 ##
lock_release_holdtime 2 ##
trace_graph_entry 2 ##
_IO_putc 1 #
__d_lookup_rcu 1 #
__do_fault 1 #
__schedule 1 #
_raw_spin_lock 1 #
delay_tsc 1 #
generic_exec_single 1 #
generic_fillattr 1 #
dso number histgram
==================================================================
[kernel.kallsyms] 95 #######
/lib/libc-2.12.1.so 5 ###
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1344419875-21665-6-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This library defines several class types for perf events which could
help to better analyze the event samples. Currently there are just a few
classes, PerfEvent is the base class for all perf events, PebsEvent is
a HW base Intel x86 PEBS event, and user could add more SW/HW event
classes based on requriements.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1344419875-21665-5-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Also as suggested by Arnaldo, pack all these parameters to a dictionary,
which is more expandable for adding new parameters while keeping the
compatibility for old scripts.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1344419875-21665-4-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Both perl and python script start processing events other than trace
points, and it's useful to pass the resolved symbol and the dso info to
the event handler in script for better analysis and statistics.
Struct thread is already a member of struct addr_location, using
addr_location will keep the thread info, while providing additional
symbol and dso info if exist, so that the script itself doesn't need to
bother to do the symbol resolving and dso searching work.
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1344419875-21665-3-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch just follows Robert Richter's idea and the commit 37a058ea0
"perf script: Add generic perl handler to process events"
to similarly add a python handler for general events other than tracepoints.
For non-tracepoint events, this patch will try to find a function named
"process_event" in the python script, and pass the event attribute,
perf_sample, raw_data in format of raw string. And the python script can
use "struct" module's unpack function to disasemble the needed info and process.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1344419875-21665-2-git-send-email-feng.tang@intel.com
[ committer note: Fixed up wrt da37896, i.e. pevent parm in script event handlers ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was missing that only certain bit fields are passed to the config
value which confused users. Updating it.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1344361396-7237-6-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixing the integer cast reported by the following warning:
tools/lib/traceevent/event-parse.c:3488:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1344361396-7237-5-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record fails on 32 bit with:
invalid or unsupported event: 'r40000F7E0'
Fixing this by parsing 64 bit num values.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1344361396-7237-4-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the OUTPUT variable set the libtraceevent.a file is wrongly built
in the source directory:
+ make -d OUTPUT=/.../.build/perf-user/ DESTDIR=/.../.install/perf-user/
...
Considering target file `../lib/traceevent//libtraceevent.a'.
File `../lib/traceevent//libtraceevent.a' does not exist.
Finished prerequisites of target file `../lib/traceevent//libtraceevent.a'.
Must remake target `../lib/traceevent//libtraceevent.a'.
Invoking recipe from Makefile:837 to update target `../lib/traceevent//libtraceevent.a'.
Putting child 0x703850 (../lib/traceevent//libtraceevent.a) PID 8365 on the chain.
Live child 0x703850 (../lib/traceevent//libtraceevent.a) PID 8365
SUBDIR ../lib/traceevent/
$ git clean -nxd
Would remove tools/lib/traceevent/.event-parse.d
Would remove tools/lib/traceevent/.parse-filter.d
Would remove tools/lib/traceevent/.parse-utils.d
Would remove tools/lib/traceevent/.trace-seq.d
Would remove tools/lib/traceevent/event-parse.o
Would remove tools/lib/traceevent/libtraceevent.a
Would remove tools/lib/traceevent/parse-filter.o
Would remove tools/lib/traceevent/parse-utils.o
Would remove tools/lib/traceevent/trace-seq.o
This patch fixes this.
Note: Though this should already work with O=$outputdir we better use
the OUTPUT variable directly.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1344361396-7237-3-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes the following:
+ make OUTPUT=/.../.build/perf-user/ DESTDIR=/.../.install/perf-user/ man install-man
make -C Documentation man
make[1]: Entering directory `/.../.source/linux.perf/tools/perf/Documentation'
make[2]: Entering directory `/.../.source/linux.perf/tools/perf'
make[2]: *** No rule to make target `PERF-VERSION-FILE'. Stop.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1344361396-7237-2-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can get all that is needed using just event_format, that is available
via evsel->tp_format now.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2hsr1686epa9f0vx4yg7z2zj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the number of parameters passed to the various event handling
functions.
Cc: Andrey Wagin <avagin@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fc537qykjjqzvyol5fecx6ug@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the number of parameters passed to the various event handling
functions.
Cc: Andrey Wagin <avagin@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bipk647rzq357yot9ao6ih73@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the number of parameters passed to the various event handling
functions.
Cc: Andrey Wagin <avagin@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-p936ngz06yo5h797ggsm7xru@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We already lookup the associated event_format when reading the perf.data
header, so that we can cache the tracepoint name in evsel->name, so do
it a little further and save the event_format itself, so that we can
avoid relookups in tools that need to access it.
Change the tools to take the most obvious advantage, when they were
using pevent_find_event directly. More work is needed for further
removing the need of a pointer to pevent, such as when asking for event
field values ("common_pid" and the other common fields and per
event_format fields).
This is something that was planned but only got actually done when
Andrey Wagin needed to do this lookup at perf_tool->sample() time, when
we don't have access to pevent (session->pevent) to use with
pevent_find_event().
Cc: Andrey Wagin <avagin@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/n/tip-txkvew2ckko0b594ae8fbnyk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We only have access to pevent after processing that event, so set the
tracepoint names there.
Right now this isn't a problem as we're deferring resolving the
tracepoint names to when we process samples, but in the next patches we
will be doing it in advance, to avoid relookups, so do it earlier, as
soon as we process the tracing data event.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-tzb7srmsl7a6o3icw592iv2o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help in debugging the tools, provides functionality roughly similar
to the function with the same name in the kernel.
Copied from glibc backtrace function man page.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-6nw2sak21bqy8h1m2syyo816@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Right now just shows the DSO name in callchain entries, to help debug
the DWARF CFI post unwind code.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-54gouunatugtfw92j6gddk45@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
. Prep work for the DWARF CFI post unwinder, so that it doesn't
uses perf_session in lots of places, just evlist/evsel is enough.
. Make clean brace expansion fix for some shells, from Palmer Cox
. Warn user just once per guest kernel when not finding kernel info,
from David Ahern
. perf test fix from Jiri Olsa
. Fix error handling on event creation in perf top, from David Ahern
. Fix check on perf_target__strnerror, from Namhyung Kim
. Save the whole cmdline, from David Ahern
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=y8ib
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core fixes and some late updates from Arnaldo Carvalho de Melo:
* Make clean brace expansion fix for some shells, from Palmer Cox
* Warn user just once per guest kernel when not finding kernel info,
from David Ahern
* perf test fix from Jiri Olsa
* Fix error handling on event creation in perf top, from David Ahern
* Fix check on perf_target__strnerror, from Namhyung Kim
* Save the whole cmdline, from David Ahern
* Prep work for the DWARF CFI post unwinder, so that it doesn't
uses perf_session in lots of places, just evlist/evsel is enough.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The clean target uses brace expansion to remove some generated files. However,
the default shells on many systems do not support this feature resulting in
some generated files not being removed by clean.
Signed-off-by: Palmer Cox <p@lmercox.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1343598883-17907-1-git-send-email-p@lmercox.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf kvm top' shows a continual flurry of:
Can't find guest [5201]'s kernel information
if it can't find the guest info and with a lot of VMs running a user has no
chance of reading them all. Limit message to once per guest.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1343709095-7089-5-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Built on rblist - like strlist. Used in the next patch.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1343709095-7089-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Replaces the direct use of rbtree code with the rblist API. In the end
the patch is a no-op on strlist functionality; the API for strlist is
not changed, only its implementaton.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1343709095-7089-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
rblist is the rbtree based code from strlist. It will be the common code
for strlist and the to-be-introduced intlist.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1343709095-7089-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Only want to process directories under the guestmnount directory that
have a pid as a name (ie, all digits). Other entries in the guestmount
directory should be ignored. There is already a check that requires the
first character of each entry to be a digit, but atoi is used to convert
the directory name to a pid. For example if guestmount contains a
directory with the name 1foo, atoi converts it to a pid of 1 and a
machine is created with a pid of 1. This is wrong; this directory really
should be ignored. Use strtol to do that.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1343616875-6455-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A number of builtin commands process some user args and then pass the rest to
cmd_record. cmd_record then saves argc/argv that it receives into the header of
the perf data file. But this loses the arguments handled by the first command
-- ie., the real command line from the user. This patch saves the command line
as typed by the user rather than what was passed to cmd_record.
As an example consider the command:
$ perf kvm --guest --host --guestmount=/tmp/guest-mount record
-fo /tmp/perf.data -ag -- sleep 10
Currently the command saved to the header is:
cmdline : /tmp/p3.5/perf record -o perf.data.kvm -fo /tmp/perf.data -ag -- sleep 1
(ignore the duplicated -o -- the first would be yet another bug with perf-kvm).
With this patch the command line saved to the header is:
cmdline : /tmp/p3.5/perf kvm --guest --host --guestmount=/tmp/guest-mount
record -fo /tmp/perf.data -ag -- sleep 1
v2: simplified to saving the command in parse_options per Stephane's suggestion
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1343616831-6408-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
5a7ed29 fixed up perf-record but not perf-top. Similar argument holds
for it -- fallback to PMU only if it does not exist and handle invalid
attributes separately.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Link: http://lkml.kernel.org/r/1343616783-6360-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we need evsel->{attr.{sample_{id_all,type}},sample_size},
reducing the number of parameters tools have to pass.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wdtmgak0ihgsmw1brb54a8h4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That is a more compact form of perf_session__parse_sample and to support
multiple evlists per perf_session is the way to go anyway.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vkxx3j5qktoj11bvcwmfjj13@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing perf_session->id_hdr_size, as it can be obtained from the
evsel/evlist.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1nwc2kslu7gsfblu98xbqbll@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing perf_session->sample_id_all, as it can be obtained from the
evsel/evlist.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ok58u1mlc5ci9b6p36r52uh1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing perf_session->sample_type, as it can be obtained from the
evsel/evlist.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mnt1zwlik7sp7z6ljc9kyefg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we don't have to store it in the perf_session instance, because
in the future perf_session instances may have multiple evlists, each
with different sample_type/sizes.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ptod86fxkpgq3h62m9refkv4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was a mistake just replace assert to BUG_ON since its condition
should be negated. Fix it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1343267410-7758-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following commit introduced wrong array boundaries, that could lead to
SIGSEGV.
perf symbols: Factor DSO symtab types to generic binary types
commit 44f24cb315
Author: Jiri Olsa <jolsa@redhat.com>
Fixing to use proper array size.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Link: http://lkml.kernel.org/r/1343825277-10517-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge Andrew's second set of patches:
- MM
- a few random fixes
- a couple of RTC leftovers
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits)
rtc/rtc-88pm80x: remove unneed devm_kfree
rtc/rtc-88pm80x: assign ret only when rtc_register_driver fails
mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables
tmpfs: distribute interleave better across nodes
mm: remove redundant initialization
mm: warn if pg_data_t isn't initialized with zero
mips: zero out pg_data_t when it's allocated
memcg: gix memory accounting scalability in shrink_page_list
mm/sparse: remove index_init_lock
mm/sparse: more checks on mem_section number
mm/sparse: optimize sparse_index_alloc
memcg: add mem_cgroup_from_css() helper
memcg: further prevent OOM with too many dirty pages
memcg: prevent OOM with too many dirty pages
mm: mmu_notifier: fix freed page still mapped in secondary MMU
mm: memcg: only check anon swapin page charges for swap cache
mm: memcg: only check swap cache pages for repeated charging
mm: memcg: split swapin charge function into private and public part
mm: memcg: remove needless !mm fixup to init_mm when charging
mm: memcg: remove unneeded shmem charge type
...
"fault-injection: add tool to run command with failslab or
fail_page_alloc" added tools/testing/fault-injection/failcmd.sh to make it
easier to inject slab/page allocation failures by fault injection.
failcmd.sh prints the following warning when running with arguments
for command.
# ./failcmd.sh echo aaa
failcmd.sh: line 209: [: echo: binary operator expected
aaa
This warning is caused by an improper check whether at least one
parameter is left after parsing command options.
Fix it by testing the length of $1 instead of $@
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull perf updates from Ingo Molnar:
"The biggest changes are Intel Nehalem-EX PMU uncore support, uprobes
updates/cleanups/fixes from Oleg and diverse tooling updates (mostly
fixes) now that Arnaldo is back from vacation."
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
uprobes: __replace_page() needs munlock_vma_page()
uprobes: Rename vma_address() and make it return "unsigned long"
uprobes: Fix register_for_each_vma()->vma_address() check
uprobes: Introduce vaddr_to_offset(vma, vaddr)
uprobes: Teach build_probe_list() to consider the range
uprobes: Remove insert_vm_struct()->uprobe_mmap()
uprobes: Remove copy_vma()->uprobe_mmap()
uprobes: Fix overflow in vma_address()/find_active_uprobe()
uprobes: Suppress uprobe_munmap() from mmput()
uprobes: Uprobe_mmap/munmap needs list_for_each_entry_safe()
uprobes: Clean up and document write_opcode()->lock_page(old_page)
uprobes: Kill write_opcode()->lock_page(new_page)
uprobes: __replace_page() should not use page_address_in_vma()
uprobes: Don't recheck vma/f_mapping in write_opcode()
perf/x86: Fix missing struct before structure name
perf/x86: Fix format definition of SNB-EP uncore QPI box
perf/x86: Make bitfield unsigned
perf/x86: Fix LLC-* and node-* events on Intel SandyBridge
perf/x86: Add Intel Nehalem-EX uncore support
perf/x86: Fix typo in format definition of uncore PCU filter
...
Merge Andrew's first set of patches:
"Non-MM patches:
- lots of misc bits
- tree-wide have_clk() cleanups
- quite a lot of printk tweaks. I draw your attention to "printk:
convert the format for KERN_<LEVEL> to a 2 byte pattern" which
looks a bit scary. But afaict it's solid.
- backlight updates
- lib/ feature work (notably the addition and use of memweight())
- checkpatch updates
- rtc updates
- nilfs updates
- fatfs updates (partial, still waiting for acks)
- kdump, proc, fork, IPC, sysctl, taskstats, pps, etc
- new fault-injection feature work"
* Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
drivers/misc/lkdtm.c: fix missing allocation failure check
lib/scatterlist: do not re-write gfp_flags in __sg_alloc_table()
fault-injection: add tool to run command with failslab or fail_page_alloc
fault-injection: add selftests for cpu and memory hotplug
powerpc: pSeries reconfig notifier error injection module
memory: memory notifier error injection module
PM: PM notifier error injection module
cpu: rewrite cpu-notifier-error-inject module
fault-injection: notifier error injection
c/r: fcntl: add F_GETOWNER_UIDS option
resource: make sure requested range is included in the root range
include/linux/aio.h: cpp->C conversions
fs: cachefiles: add support for large files in filesystem caching
pps: return PTR_ERR on error in device_create
taskstats: check nla_reserve() return
sysctl: suppress kmemleak messages
ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION
ipc: compat: use signed size_t types for msgsnd and msgrcv
ipc: allow compat IPC version field parsing if !ARCH_WANT_OLD_COMPAT_IPC
ipc: add COMPAT_SHMLBA support
...
This adds tools/testing/fault-injection/failcmd.sh to run a command while
injecting slab/page allocation failures via fault injection.
Example:
Run a command "make -C tools/testing/selftests/ run_tests" with
injecting slab allocation failure.
# ./tools/testing/fault-injection/failcmd.sh \
-- make -C tools/testing/selftests/ run_tests
Same as above except to specify 100 times failures at most instead of
one time at most by default.
# ./tools/testing/fault-injection/failcmd.sh --times=100 \
-- make -C tools/testing/selftests/ run_tests
Same as above except to inject page allocation failure instead of slab
allocation failure.
# env FAILCMD_TYPE=fail_page_alloc \
./tools/testing/fault-injection/failcmd.sh --times=100 \
-- make -C tools/testing/selftests/ run_tests
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds two selftests
* tools/testing/selftests/cpu-hotplug/on-off-test.sh is testing script
for CPU hotplug
1. Online all hot-pluggable CPUs
2. Offline all hot-pluggable CPUs
3. Online all hot-pluggable CPUs again
4. Exit if cpu-notifier-error-inject.ko is not available
5. Offline all hot-pluggable CPUs in preparation for testing
6. Test CPU hot-add error handling by injecting notifier errors
7. Online all hot-pluggable CPUs in preparation for testing
8. Test CPU hot-remove error handling by injecting notifier errors
* tools/testing/selftests/memory-hotplug/on-off-test.sh is doing the
similar thing for memory hotplug.
1. Online all hot-pluggable memory
2. Offline 10% of hot-pluggable memory
3. Online all hot-pluggable memory again
4. Exit if memory-notifier-error-inject.ko is not available
5. Offline 10% of hot-pluggable memory in preparation for testing
6. Test memory hot-add error handling by injecting notifier errors
7. Online all hot-pluggable memory in preparation for testing
8. Test memory hot-remove error handling by injecting notifier errors
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=d3bg
-----END PGP SIGNATURE-----
Merge tag 'ktest-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest changes from Steven Rostedt:
"Set of updates for v3.6 (some fixes too)
Seems that you opened the merge window the day I left for the beach.
I just got back (yes us Americans only take a week vacation), and just
got the last of my ktest quilt queue into git."
* tag 'ktest-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Allow perl regex expressions in conditional statements
ktest: Ignore errors it tests if IGNORE_ERRORS is set
ktest: Reset saved min (force) configs for each test
ktest: Add check for bug or panic during reboot
ktest: Add MAX_MONITOR_WAIT option
ktest: Fix config bisect with how make oldnoconfig works
ktest: Add CONFIG_BISECT_CHECK option
ktest: Add PRE_INSTALL option
ktest: Add PRE/POST_KTEST and TEST options
ktest: Remove commented exit
Add '=~' and '!~' to the list of allowed conditionals for DEFAULT and
TEST_START section if statements.
ie.
TEST_START IF TEST =~ .*test$
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The option IGNORE_ERRORS is used to allow a test to succeed even if a
warning appears from the kernel. Sometimes kernels will produce warnings
that are not associated with a test, and the user wants to test
something else.
The IGNORE_ERRORS works for boot up, but was not preventing test runs to
succeed if the kernel produced a warning.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull SLAB changes from Pekka Enberg:
"Most of the changes included are from Christoph Lameter's "common
slab" patch series that unifies common parts of SLUB, SLAB, and SLOB
allocators. The unification is needed for Glauber Costa's "kmem
memcg" work that will hopefully appear for v3.7.
The rest of the changes are fixes and speedups by various people."
* 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: (32 commits)
mm: Fix build warning in kmem_cache_create()
slob: Fix early boot kernel crash
mm, slub: ensure irqs are enabled for kmemcheck
mm, sl[aou]b: Move kmem_cache_create mutex handling to common code
mm, sl[aou]b: Use a common mutex definition
mm, sl[aou]b: Common definition for boot state of the slab allocators
mm, sl[aou]b: Extract common code for kmem_cache_create()
slub: remove invalid reference to list iterator variable
mm: Fix signal SIGFPE in slabinfo.c.
slab: move FULL state transition to an initcall
slab: Fix a typo in commit 8c138b "slab: Get rid of obj_size macro"
mm, slab: Build fix for recent kmem_cache changes
slab: rename gfpflags to allocflags
slub: refactoring unfreeze_partials()
slub: use __cmpxchg_double_slab() at interrupt disabled place
slab/mempolicy: always use local policy from interrupt context
slab: Get rid of obj_size macro
mm, sl[aou]b: Extract common fields from struct kmem_cache
slab: Remove some accessors
slab: Use page struct fields instead of casting
...
Pull ACPI & power management update from Len Brown:
"Re-write of the turbostat tool.
lower overhead was necessary for measuring very large system when
they are very idle.
IVB support in intel_idle
It's what I run on my IVB, others should be able to also:-)
ACPICA core update
We have found some bugs due to divergence between Linux and the
upstream ACPICA base. Most of these patches are to reduce that
divergence to reduce the risk of future bugs.
Some cpuidle updates, mostly for non-Intel
More will be coming, as they depend on this part.
Some thermal management changes needed by non-ACPI systems.
Some _OST (OS Status Indication) updates for hot ACPI hot-plug."
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (51 commits)
Thermal: Documentation update
Thermal: Add Hysteresis attributes
Thermal: Make Thermal trip points writeable
ACPI/AC: prevent OOPS on some boxes due to missing check power_supply_register() return value check
tools/power: turbostat: fix large c1% issue
tools/power: turbostat v2 - re-write for efficiency
ACPICA: Update to version 20120711
ACPICA: AcpiSrc: Fix some translation issues for Linux conversion
ACPICA: Update header files copyrights to 2012
ACPICA: Add new ACPI table load/unload external interfaces
ACPICA: Split file: tbxface.c -> tbxfload.c
ACPICA: Add PCC address space to space ID decode function
ACPICA: Fix some comment fields
ACPICA: Table manager: deploy new firmware error/warning interfaces
ACPICA: Add new interfaces for BIOS(firmware) errors and warnings
ACPICA: Split exception code utilities to a new file, utexcep.c
ACPI: acpi_pad: tune round_robin_time
ACPICA: Update to version 20120620
ACPICA: Add support for implicit notify on multiple devices
ACPICA: Update comments; no functional change
...
Here's the big USB patch set for the 3.6-rc1 merge window.
Lots of little changes in here, primarily for gadget controllers and drivers.
There's some scsi changes that I think also went in through the scsi tree, but
they merge just fine. All of these patches have been in the linux-next tree
for a while now.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iEYEABECAAYFAlAQhpcACgkQMUfUDdst+yms4wCgpMbfFYTZ8lHpDnXHYFv6qw8j
FIsAmwT4mbT7m8C0k+ELV/5T2e0eYJEQ
=QetG
-----END PGP SIGNATURE-----
Merge tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB patches from Greg Kroah-Hartman:
"Here's the big USB patch set for the 3.6-rc1 merge window.
Lots of little changes in here, primarily for gadget controllers and
drivers. There's some scsi changes that I think also went in through
the scsi tree, but they merge just fine. All of these patches have
been in the linux-next tree for a while now.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fix up trivial conflicts in include/scsi/scsi_device.h (same libata
conflict that Jeff had already encountered)
* tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
usb: Add quirk detection based on interface information
usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h
USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
USB: add USB_VENDOR_AND_INTERFACE_INFO() macro
USB: notify phy when root hub port connect change
USB: remove 8 bytes of padding from usb_host_interface on 64 bit builds
USB: option: add ZTE MF821D
USB: sierra: QMI mode MC7710 moved to qcserial
USB: qcserial: adding Sierra Wireless devices
USB: qcserial: support generic Qualcomm serial ports
USB: qcserial: make probe more flexible
USB: qcserial: centralize probe exit path
USB: qcserial: consolidate usb_set_interface calls
USB: ehci-s5p: Add support for device tree
USB: ohci-exynos: Add support for device tree
USB: ehci-omap: fix compile failure(v1)
usb: host: tegra: pass correct pointer in ehci_setup()
USB: ehci-fsl: Update ifdef check to work on 64-bit ppc
USB: serial: keyspan: Removed unrequired parentheses.
...
A large enough symbol size causes an overflow in the size parameter to
the histogram allocation, leading to a segfault in
symbol__inc_addr_samples later on when this histogram is accessed.
In the case of being called via perf-report, this returns back and
gracefully ignores the sample, eventually ignoring the chained return
value of perf_session_deliver_event in flush_sample_queue.
Signed-off-by: Cody Schafer <cody@linux.vnet.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1342753525-4521-1-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The TRACEEVENT-CFLAGS file is used to detect any change on compiler
flags. Just ignore it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1341559297-25725-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cross compiling perf requires setting ARCH and CROSS_COMPILE variables,
but libtraceevent couldn't detect the changes so it ends up believing no
recompiling is required. Thus the linker failed like:
LINK perf
../lib/traceevent//libtraceevent.a: member ../lib/traceevent//libtraceevent.a(event-parse.o) in archive is not an object
collect2: ld returned 1 exit status
make: *** [perf] Error 1
This patch fixes this by adding TRACEEVENT-CFLAGS file like
PERF-CFLAGS to track those changes.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1341559297-25725-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Bison 2.6 started to generate parse_events_parse() declaration in header. In
this case we have redundant redeclaration:
util/parse-events.c:29:5: error: redundant redeclaration of ‘parse_events_parse’ [-Werror=redundant-decls]
In file included from util/parse-events.c:14:0:
util/parse-events-bison.h:99:5: note: previous declaration of ‘parse_events_parse’ was here
cc1: all warnings being treated as errors
Let's disable -Wredundant-decls for util/parse-events.c since it includes
header we can't control.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120723210407.GA25186@shutemov.name
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf uses GNU-specific version of strerror_r(). The GNU-specific strerror_r()
returns a pointer to a string containing the error message. This may be either
a pointer to a string that the function stores in buf, or a pointer to some
(immutable) static string (in which case buf is unused).
In glibc-2.16 GNU version was marked with attribute warn_unused_result. It
triggers few warnings in perf:
util/target.c: In function ‘perf_target__strerror’:
util/target.c:114:13: error: ignoring return value of ‘strerror_r’, declared with attribute warn_unused_result [-Werror=unused-result]
ui/browsers/hists.c: In function ‘hist_browser__dump’:
ui/browsers/hists.c:981:13: error: ignoring return value of ‘strerror_r’, declared with attribute warn_unused_result [-Werror=unused-result]
They are bugs.
Let's fix strerror_r() usage.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: Ulrich Drepper <drepper@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/20120723210654.GA25248@shutemov.name
[ committer note: s/assert/BUG_ON/g ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There have one problem about hw_breakpoint perf event, as watched, the
events reported to userspace is not correctly, sometime one trigger
bp_event report several events, sometime bp_event cannot go through to
user.
The root cause is attr->freq is 1 passed to kernel defaultly in bp
events, this make kernel calculate event period not as expect, make
sample period to 1 will change attr->freq to 0, to fix this problem.
This patch is similar with commit f92128 about tracepoint events:
perf: Make the trace events sample period default to 1
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/CACV3sbLF8taiCq_VYW-sgRJyupeMzg58C7ZXfMe3xZUiH_Mx6w@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding dso data caching so we don't need to open/read/close, each time
we want dso data.
The DSO data caching affects following functions:
dso__data_read_offset
dso__data_read_addr
Each DSO read tries to find the data (based on offset) inside the cache.
If it's not present it fills the cache from file, and returns the data.
If it is present, data are returned with no file read.
Each data read is cached by reading cache page sized/aligned amount of
DSO data. The cache page size is hardcoded to 4096. The cache is using
RB tree with file offset as a sort key.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1342959280-5361-17-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding following interface for DSO object to allow
reading of DSO image data:
dso__data_fd
- opens DSO and returns file descriptor
Binary types are used to locate/open DSO in following order:
DSO_BINARY_TYPE__BUILD_ID_CACHE
DSO_BINARY_TYPE__SYSTEM_PATH_DSO
In other word we first try to open DSO build-id path,
and if that fails we try to open DSO system path.
dso__data_read_offset
- reads DSO data from specified offset
dso__data_read_addr
- reads DSO data from specified address/map.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1342959280-5361-11-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding interface to access DSOs so it could be used
from another place.
New DSO binary type is added - making current SYMTAB__*
types more general:
DSO_BINARY_TYPE__* = SYMTAB__*
Following function is added to return path based on the specified
binary type:
dso__binary_type_file
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1342959280-5361-10-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Trace events have a period (weight) of 1 by default. This can be
overriden on events definition by using the __perf_count() macro.
For example, the sched_stat_runtime() is weighted with the runtime of
the task that fired the event.
By default, perf handles such weighted event by dividing it into
individual events carrying a weight of 1. For example if
sched_stat_runtime is fired and the task has run 5000000 nsecs, perf
divides it into 5000000 events in the buffer.
This behaviour makes weighted events unusable because they quickly
fullfill the buffers and we lose most events.
The commit 5d81e5cfb3 ("events: Don't
divide events if it has field period") solves this problem by sending
only one event when PERF_SAMPLE_PERIOD flag is set. The weight is
carried in the sample itself such that we don't need to demultiplex it
anymore.
This patch provides the last missing piece to use this feature by
setting PERF_SAMPLE_PERIOD from perf tools when we deal with trace
events.
Before:
$ ./perf record -e sched:* -a sleep 1
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 1.619 MB perf.data (~70749 samples) ]
Warning:
Processed 16909 events and lost 1 chunks!
Check IO/CPU overload!
$ ./perf script
perf 1894 [003] 824.898327: sched_migrate_task: comm=perf pid=1898 prio=120 orig_cpu=2 dest_cpu=0
perf 1894 [003] 824.898335: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
perf 1894 [003] 824.898336: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
perf 1894 [003] 824.898337: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
perf 1894 [003] 824.898338: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
perf 1894 [003] 824.898339: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
perf 1894 [003] 824.898340: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
perf 1894 [003] 824.898341: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
[...]
After:
$ ./perf record -e sched:* -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.074 MB perf.data (~3228 samples) ]
$ ./perf script
perf 1461 [000] 554.286957: sched_migrate_task: comm=perf pid=1465 prio=120 orig_cpu=3 dest_cpu=1
perf 1461 [000] 554.286964: sched_stat_sleep: comm=perf pid=1465 delay=133047190 [ns]
perf 1461 [000] 554.286967: sched_wakeup: comm=perf pid=1465 prio=120 success=1 target_cpu=001
swapper 0 [001] 554.286976: sched_stat_wait: comm=perf pid=1465 delay=0 [ns]
swapper 0 [001] 554.286983: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=perf
[...]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1342631456-7233-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Include the omitted number of characters printed for the first entry.
Not that it really matters because nobody seem to care about the number
of printed characters for now. But just in case.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1342631456-7233-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After 7ed97ad use of the guestmount option without a subdir for *each*
VM generates an error message for each sample related to that VM. Once
per VM is enough.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1342826756-64663-7-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Guest kernel symbols are not resolved despite passing the information
needed to resolve them. e.g.,
perf kvm --guest --guestmount=/tmp/guest-mount record -a -- sleep 1
perf kvm --guest --guestmount=/tmp/guest-mount report --stdio
36.55% [guest/11399] [unknown] [g] 0xffffffff81600bc8
33.19% [guest/10474] [unknown] [g] 0x00000000c0116e00
30.26% [guest/11094] [unknown] [g] 0xffffffff8100a288
43.69% [guest/10474] [unknown] [g] 0x00000000c0103d90
37.38% [guest/11399] [unknown] [g] 0xffffffff81600bc8
12.24% [guest/11094] [unknown] [g] 0xffffffff810aa91d
6.69% [guest/11094] [unknown] [u] 0x00007fa784d721c3
which is just pathetic.
After a maddening 2 days sifting through perf minutia I found it --
id_hdr_size is not initialized for guest machines. This shows up on the
report side as random garbage for the cpu and timestamp, e.g.,
29816 7310572949125804849 0x1ac0 [0x50]: PERF_RECORD_MMAP ...
That messes up the sample sorting such that synthesized guest maps are
processed last.
With this patch you get a much more helpful report:
12.11% [guest/11399] [guest.kernel.kallsyms.11399] [g] irqtime_account_process_tick
10.58% [guest/11399] [guest.kernel.kallsyms.11399] [g] run_timer_softirq
6.95% [guest/11094] [guest.kernel.kallsyms.11094] [g] printk_needs_cpu
6.50% [guest/11094] [guest.kernel.kallsyms.11094] [g] do_timer
6.45% [guest/11399] [guest.kernel.kallsyms.11399] [g] idle_balance
4.90% [guest/11094] [guest.kernel.kallsyms.11094] [g] native_read_tsc
...
v2:
- changed rbtree walk to use rb_first per Namhyung's suggestion
Tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1342826756-64663-5-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
COMM events are not generated in the context of a guest machine, so the
thread name is never set for the VMM process. For example, the qemu-kvm
name applies to the process in the host machine, not the guest machine.
So, samples for guest machines are currently displayed as:
99.67% :5671 [unknown] [g] 0xffffffff81366b41
where 5671 is the pid of the VMM. With this patch the samples in the guest
machine are shown as:
18.43% [guest/5671] [unknown] [g] 0xffffffff810d68b7
Tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1342826756-64663-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current debug message is:
Problems creating module maps, continuing anyway...
When running multiple VMs it would be nice to know which machine the
message is referring to:
$ perf kvm --guest --guestmount=/tmp/guest-mount record -av -- sleep 10
Problems creating module maps for guest 6613, continuing anyway...
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1342826756-64663-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The min configs are saved in a perl hash called force_configs, and this
hash is used to add configs to the .config file. But it was not being
reset between tests and a min config from a previous test would affect
the min config of the next test causing undesirable results.
Reset the force_config hash at the start of each test.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Under some conditions, c1% was displayed as very large number,
much higher than 100%.
c1% is not measured, it is derived as "that, which is left over"
from other counters. However, the other counters are not collected
atomically, and so it is possible for c1% to be calaculagted as
a small negative number -- displayed as very large positive.
There was a check for mperf vs tsc for this already,
but it needed to also include the other counters
that are used to calculate c1.
Signed-off-by: Len Brown <len.brown@intel.com>
