Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} +
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This is a follow up to commit 4c9847b737 ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Pull x86 retpoline fixlet from Thomas Gleixner:
"Remove the ESP/RSP thunks for retpoline as they cannot ever work.
Get rid of them before they show up in a release"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Remove the esp/rsp thunk
Pull x86 fixes from Thomas Gleixner:
"A set of small fixes for 4.15:
- Fix vmapped stack synchronization on systems with 4-level paging
and a large amount of memory caused by a missing 5-level folding
which made the pgd synchronization logic to fail and causing double
faults.
- Add a missing sanity check in the vmalloc_fault() logic on 5-level
paging systems.
- Bring back protection against accessing a freed initrd in the
microcode loader which was lost by a wrong merge conflict
resolution.
- Extend the Broadwell micro code loading sanity check.
- Add a missing ENDPROC annotation in ftrace assembly code which
makes ORC unhappy.
- Prevent loading the AMD power module on !AMD platforms. The load
itself is uncritical, but an unload attempt results in a kernel
crash.
- Update Peter Anvins role in the MAINTAINERS file"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ftrace: Add one more ENDPROC annotation
x86: Mark hpa as a "Designated Reviewer" for the time being
x86/mm/64: Tighten up vmalloc_fault() sanity checks on 5-level kernels
x86/mm/64: Fix vmapped stack syncing on very-large-memory 4-level systems
x86/microcode: Fix again accessing initrd after having been freed
x86/microcode/intel: Extend BDW late-loading further with LLC size check
perf/x86/amd/power: Do not load AMD power module on !AMD platforms
Pull timer fix from Thomas Gleixner:
"A single fix for a ~10 years old problem which causes high resolution
timers to stop after a CPU unplug/plug cycle due to a stale flag in
the per CPU hrtimer base struct.
Paul McKenney was hunting this for about a year, but the heisenbug
nature made it resistant against debug attempts for quite some time"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Reset hrtimer cpu base proper on CPU hotplug
Pull scheduler fix from Thomas Gleixner:
"A single bug fix to prevent a subtle deadlock in the scheduler core
code vs cpu hotplug"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix cpu.max vs. cpuhotplug deadlock
Pull perf fixes from Thomas Gleixner:
"Four patches which all address lock inversions and deadlocks in the
perf core code and the Intel debug store"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix perf,x86,cpuhp deadlock
perf/core: Fix ctx::mutex deadlock
perf/core: Fix another perf,trace,cpuhp lock inversion
perf/core: Fix lock inversion between perf,trace,cpuhp
Pull locking fixes from Thomas Gleixner:
"Two final locking fixes for 4.15:
- Repair the OWNER_DIED logic in the futex code which got wreckaged
with the recent fix for a subtle race condition.
- Prevent the hard lockup detector from triggering when dumping all
held locks in the system"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Avoid triggering hardlockup from debug_show_all_locks()
futex: Fix OWNER_DEAD fixup
When ORC support was added for the ftrace_64.S code, an ENDPROC
for function_hook() was missed. This results in the following warning:
arch/x86/kernel/ftrace_64.o: warning: objtool: .entry.text+0x0: unreachable instruction
Fixes: e2ac83d74a ("x86/ftrace: Fix ORC unwinding from ftrace handlers")
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20180128022150.dqierscqmt3uwwsr@treble
The hrtimer interrupt code contains a hang detection and mitigation
mechanism, which prevents that a long delayed hrtimer interrupt causes a
continous retriggering of interrupts which prevent the system from making
progress. If a hang is detected then the timer hardware is programmed with
a certain delay into the future and a flag is set in the hrtimer cpu base
which prevents newly enqueued timers from reprogramming the timer hardware
prior to the chosen delay. The subsequent hrtimer interrupt after the delay
clears the flag and resumes normal operation.
If such a hang happens in the last hrtimer interrupt before a CPU is
unplugged then the hang_detected flag is set and stays that way when the
CPU is plugged in again. At that point the timer hardware is not armed and
it cannot be armed because the hang_detected flag is still active, so
nothing clears that flag. As a consequence the CPU does not receive hrtimer
interrupts and no timers expire on that CPU which results in RCU stalls and
other malfunctions.
Clear the flag along with some other less critical members of the hrtimer
cpu base to ensure starting from a clean state when a CPU is plugged in.
Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the
root cause of that hard to reproduce heisenbug. Once understood it's
trivial and certainly justifies a brown paperbag.
Fixes: 41d2e49493 ("hrtimer: Tune hrtimer_interrupt hang logic")
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Sewior <bigeasy@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801261447590.2067@nanos
Due to some unfortunate events, I have not been directly involved in
the x86 kernel patch flow for a while now. I have also not been able
to ramp back up by now like I had hoped to, and after reviewing what I
will need to work on both internally at Intel and elsewhere in the near
term, it is clear that I am not going to be able to ramp back up until
late 2018 at the very earliest.
It is not acceptable to not recognize that this load is currently
taken by Ingo and Thomas without my direct participation, so I mark
myself as R: (designated reviewer) rather than M: (maintainer) until
further notice. This is in fact recognizing the de facto situation
for the past few years.
I have obviously no intention of going away, and I will do everything
within my power to improve Linux on x86 and x86 for Linux. This,
however, puts credit where it is due and reflects a change of focus.
This patch also removes stale entries for portions of the x86
architecture which have not been maintained separately from arch/x86
for a long time. If there is a reason to re-introduce them then that
can happen later.
Signed-off-by: H. Peter Anvin <h.peter.anvin@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bruce Schlobohm <bruce.schlobohm@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180125195934.5253-1-hpa@zytor.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sorry to send something essentially as late as possible (Friday after an
rc9), but we managed to get a mailing list for the RISC-V Linux port.
We've been using patches@groups.riscv.org for a while, but that list has
some problems (it's Google Groups and it's shared over all RISC-V
software projects). The new infaread.org list is much better. We just
got it on Wednesday but I used it a bit on Thursday to shake out all the
configuration problems and it appears to be in working order.
When I updated the mailing list I noticed that the MAINTAINERS file was
pointing to our github repo, but now that we have a kernel.org repo I'd
like to point to that instead so I changed that as well. We'll be
centralizing all RISC-V Linux related development here as that seems to
be the saner way to go about it.
I can understand if it's too late to get this into 4.15, but given that
it's not a code change I was hoping it'd still be OK. It would be nice
to have the new mailing list and git repo in the release tarballs so
when people start to find bugs they'll get to the right place.
-----BEGIN PGP SIGNATURE-----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=zdWp
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.15-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V update from Palmer Dabbelt:
"RISC-V: We have a new mailing list and git repo!
Sorry to send something essentially as late as possible (Friday after
an rc9), but we managed to get a mailing list for the RISC-V Linux
port. We've been using patches@groups.riscv.org for a while, but that
list has some problems (it's Google Groups and it's shared over all
RISC-V software projects). The new infaread.org list is much better.
We just got it on Wednesday but I used it a bit on Thursday to shake
out all the configuration problems and it appears to be in working
order.
When I updated the mailing list I noticed that the MAINTAINERS file
was pointing to our github repo, but now that we have a kernel.org
repo I'd like to point to that instead so I changed that as well.
We'll be centralizing all RISC-V Linux related development here as
that seems to be the saner way to go about it.
I can understand if it's too late to get this into 4.15, but given
that it's not a code change I was hoping it'd still be OK. It would be
nice to have the new mailing list and git repo in the release tarballs
so when people start to find bugs they'll get to the right place"
* tag 'riscv-for-linus-4.15-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
Update the RISC-V MAINTAINERS file
Pull networking fixes from David Miller:
1) The per-network-namespace loopback device, and thus its namespace,
can have its teardown deferred for a long time if a kernel created
TCP socket closes and the namespace is exiting meanwhile. The kernel
keeps trying to finish the close sequence until it times out (which
takes quite some time).
Fix this by forcing the socket closed in this situation, from Dan
Streetman.
2) Fix regression where we're trying to invoke the update_pmtu method
on route types (in this case metadata tunnel routes) that don't
implement the dst_ops method. Fix from Nicolas Dichtel.
3) Fix long standing memory corruption issues in r8169 driver by
performing the chip statistics DMA programming more correctly. From
Francois Romieu.
4) Handle local broadcast sends over VRF routes properly, from David
Ahern.
5) Don't refire the DCCP CCID2 timer endlessly, otherwise the socket
can never be released. From Alexey Kodanev.
6) Set poll flags properly in VSOCK protocol layer, from Stefan
Hajnoczi.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
VSOCK: set POLLOUT | POLLWRNORM for TCP_CLOSING
dccp: don't restart ccid2_hc_tx_rto_expire() if sk in closed state
net: vrf: Add support for sends to local broadcast address
r8169: fix memory corruption on retrieval of hardware statistics.
net: don't call update_pmtu unconditionally
net: tcp: close sock if net namespace is exiting
-----BEGIN PGP SIGNATURE-----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=r4NK
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.15-rc10-2' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A fairly urgent nouveau regression fix for broken irqs across
suspend/resume came in. This was broken before but a patch in 4.15 has
made it much more obviously broken and now s/r fails a lot more often.
The fix removes freeing the irq across s/r which never should have
been done anyways.
Also two vc4 fixes for a NULL deference and some misrendering /
flickering on screen"
* tag 'drm-fixes-for-v4.15-rc10-2' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: Move irq setup/teardown to pci ctor/dtor
drm/vc4: Fix NULL pointer dereference in vc4_save_hang_state()
drm/vc4: Flush the caches before the bin jobs, as well.
select(2) with wfds but no rfds must return when the socket is shut down
by the peer. This way userspace notices socket activity and gets -EPIPE
from the next write(2).
Currently select(2) does not return for virtio-vsock when a SEND+RCV
shutdown packet is received. This is because vsock_poll() only sets
POLLOUT | POLLWRNORM for TCP_CLOSE, not the TCP_CLOSING state that the
socket is in when the shutdown is received.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ccid2_hc_tx_rto_expire() timer callback always restarts the timer
again and can run indefinitely (unless it is stopped outside), and after
commit 120e9dabaf ("dccp: defer ccid_hc_tx_delete() at dismantle time"),
which moved ccid_hc_tx_delete() (also includes sk_stop_timer()) from
dccp_destroy_sock() to sk_destruct(), this started to happen quite often.
The timer prevents releasing the socket, as a result, sk_destruct() won't
be called.
Found with LTP/dccp_ipsec tests running on the bonding device,
which later couldn't be unloaded after the tests were completed:
unregister_netdevice: waiting for bond0 to become free. Usage count = 148
Fixes: 2a91aa3967 ("[DCCP] CCID2: Initial CCID2 (TCP-Like) implementation")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we're upstream in Linux we've been able to make some
infrastructure changes so our port works a bit more like other ports.
Specifically:
* We now have a mailing list specific to the RISC-V Linux port, hosted
at lists.infreadead.org.
* We now have a kernel.org git tree where work on our port is
coordinated.
This patch changes the RISC-V maintainers entry to reflect these new
bits of infrastructure.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
On a 5-level kernel, if a non-init mm has a top-level entry, it needs to
match init_mm's, but the vmalloc_fault() code skipped over the BUG_ON()
that would have checked it.
While we're at it, get rid of the rather confusing 4-level folded "pgd"
logic.
Cleans-up: b50858ce3e ("x86/mm/vmalloc: Add 5-level paging support")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Neil Berrington <neil.berrington@datacore.com>
Link: https://lkml.kernel.org/r/2ae598f8c279b0a29baf75df207e6f2fdddc0a1b.1516914529.git.luto@kernel.org
Neil Berrington reported a double-fault on a VM with 768GB of RAM that uses
large amounts of vmalloc space with PTI enabled.
The cause is that load_new_mm_cr3() was never fixed to take the 5-level pgd
folding code into account, so, on a 4-level kernel, the pgd synchronization
logic compiles away to exactly nothing.
Interestingly, the problem doesn't trigger with nopti. I assume this is
because the kernel is mapped with global pages if we boot with nopti. The
sequence of operations when we create a new task is that we first load its
mm while still running on the old stack (which crashes if the old stack is
unmapped in the new mm unless the TLB saves us), then we call
prepare_switch_to(), and then we switch to the new stack.
prepare_switch_to() pokes the new stack directly, which will populate the
mapping through vmalloc_fault(). I assume that we're getting lucky on
non-PTI systems -- the old stack's TLB entry stays alive long enough to
make it all the way through prepare_switch_to() and switch_to() so that we
make it to a valid stack.
Fixes: b50858ce3e ("x86/mm/vmalloc: Add 5-level paging support")
Reported-and-tested-by: Neil Berrington <neil.berrington@datacore.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: stable@vger.kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/346541c56caed61abbe693d7d2742b4a380c5001.1516914529.git.luto@kernel.org
Sukumar reported that sends to the local broadcast address
(255.255.255.255) are broken. Check for the address in vrf driver
and do not redirect to the VRF device - similar to multicast
packets.
With this change sockets can use SO_BINDTODEVICE to specify an
egress interface and receive responses. Note: the egress interface
can not be a VRF device but needs to be the enslaved device.
https://bugzilla.kernel.org/show_bug.cgi?id=198521
Reported-by: Sukumar Gopalakrishnan <sukumarg1973@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hardware statistics retrieval hurts in tight invocation loops.
Avoid extraneous write and enforce strict ordering of writes targeted to
the tally counters dump area address registers.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Oliver Freyermuth <o.freyermuth@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull input fixes from Dmitry Torokhov:
"The main item is that we try to better handle the newer trackpoints on
Lenovo devices that are now being produced by Elan/ALPS/NXP and only
implement a small subset of the original IBM trackpoint controls"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Revert "Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01"
Input: trackpoint - only expose supported controls for Elan, ALPS and NXP
Input: trackpoint - force 3 buttons if 0 button is reported
Input: xpad - add support for PDP Xbox One controllers
Input: stmfts,s6sy671 - add SPDX identifier
After do_readv_writev, the inode cache is invalidated anyway, so i_size
will never be read. It will be fetched from the server which will also
know about updates from other machines.
Fixes deadlock on 32-bit SMP.
See https://marc.info/?l=linux-fsdevel&m=151268557427760&w=2
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For a while we've been having issues with seemingly random interrupts
coming from nvidia cards when resuming them. Originally the fix for this
was thought to be just re-arming the MSI interrupt registers right after
re-allocating our IRQs, however it seems a lot of what we do is both
wrong and not even nessecary.
This was made apparent by what appeared to be a regression in the
mainline kernel that started introducing suspend/resume issues for
nouveau:
a0c9259dc4 (irq/matrix: Spread interrupts on allocation)
After this commit was introduced, we started getting interrupts from the
GPU before we actually re-allocated our own IRQ (see references below)
and assigned the IRQ handler. Investigating this turned out that the
problem was not with the commit, but the fact that nouveau even
free/allocates it's irqs before and after suspend/resume.
For starters: drivers in the linux kernel haven't had to handle
freeing/re-allocating their IRQs during suspend/resume cycles for quite
a while now. Nouveau seems to be one of the few drivers left that still
does this, despite the fact there's no reason we actually need to since
disabling interrupts from the device side should be enough, as the
kernel is already smart enough to know to disable host-side interrupts
for us before going into suspend. Since we were tearing down our IRQs by
hand however, that means there was a short period during resume where
interrupts could be received before we re-allocated our IRQ which would
lead to us getting an unhandled IRQ. Since we never handle said IRQ and
re-arm the interrupt registers, this would cause us to miss all of the
interrupts from the GPU and cause our init process to start timing out
on anything requiring interrupts.
So, since this whole setup/teardown every suspend/resume cycle is
useless anyway, move irq setup/teardown into the pci subdev's ctor/dtor
functions instead so they're only called at driver load and driver
unload. This should fix most of the issues with pending interrupts on
resume, along with getting suspend/resume for nouveau to work again.
As well, this probably means we can also just remove the msi rearm call
inside nvkm_pci_init(). But since our main focus here is to fix
suspend/resume before 4.15, we'll save that for a later patch.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Galbraith <efault@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Some dst_ops (e.g. md_dst_ops)) doesn't set this handler. It may result to:
"BUG: unable to handle kernel NULL pointer dereference at (null)"
Let's add a helper to check if update_pmtu is available before calling it.
Fixes: 52a589d51f ("geneve: update skb dst pmtu on tx path")
Fixes: a93bf0ff44 ("vxlan: update skb dst pmtu on tx path")
CC: Roman Kapl <code@rkapl.cz>
CC: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix races and potential use after free in the s390 cmma migration code.
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJaaghHAAoJEED/6hsPKofoJksIAJbpIR/Z6n1ycryT6G2iKmda
QT8hYLanuOHNyEinu1AoikqP2bQRzqwuYzfzkECyaliJXKpmki86f8p+HOsNH1Ye
db9vokkvWfyJBZ10d2JOLbGVDxQXX94bMgtO3aF6RcneYgalABOwQU4ltY5gnXXI
5E8xU9d7ya1ivv5ADvPW8tv6GU9YMb5VB1EzM2owjQP3ks0/6p3jXT8XJJGhfufO
6r6Y/E4HnxRKWXTDNoLU6b3sdpCDmMMBRO55AYE2eF/RA84glv9U+xnxs0fXJA8M
OOWrtB4nxxcrCbSve38aONN5E5lSzjWl6/3t2ajbDeIV8r9Fh8Vh7MpeSY6oyZs=
=i5NW
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"Fix races and a potential use after free in the s390 cmma migration
code"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: add proper locking for CMMA migration bitmap
-----BEGIN PGP SIGNATURE-----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=EOAu
-----END PGP SIGNATURE-----
Merge tag 'for-4.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"It's been reported recently that readdir can list stale entries under
some conditions. Fix it."
* tag 'for-4.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix stale entries in readdir
When a tcp socket is closed, if it detects that its net namespace is
exiting, close immediately and do not wait for FIN sequence.
For normal sockets, a reference is taken to their net namespace, so it will
never exit while the socket is open. However, kernel sockets do not take a
reference to their net namespace, so it may begin exiting while the kernel
socket is still open. In this case if the kernel socket is a tcp socket,
it will stay open trying to complete its close sequence. The sock's dst(s)
hold a reference to their interface, which are all transferred to the
namespace's loopback interface when the real interfaces are taken down.
When the namespace tries to take down its loopback interface, it hangs
waiting for all references to the loopback interface to release, which
results in messages like:
unregister_netdevice: waiting for lo to become free. Usage count = 1
These messages continue until the socket finally times out and closes.
Since the net namespace cleanup holds the net_mutex while calling its
registered pernet callbacks, any new net namespace initialization is
blocked until the current net namespace finishes exiting.
After this change, the tcp socket notices the exiting net namespace, and
closes immediately, releasing its dst(s) and their reference to the
loopback interface, which lets the net namespace continue exiting.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711407
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=97811
Signed-off-by: Dan Streetman <ddstreet@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lockdep noticed the following 3-way lockup scenario:
sys_perf_event_open()
perf_event_alloc()
perf_try_init_event()
#0 ctx = perf_event_ctx_lock_nested(1)
perf_swevent_init()
swevent_hlist_get()
#1 mutex_lock(&pmus_lock)
perf_event_init_cpu()
#1 mutex_lock(&pmus_lock)
#2 mutex_lock(&ctx->mutex)
sys_perf_event_open()
mutex_lock_double()
#2 mutex_lock()
#0 mutex_lock_nested()
And while we need that perf_event_ctx_lock_nested() for HW PMUs such
that they can iterate the sibling list, trying to match it to the
available counters, the software PMUs need do no such thing. Exclude
them.
In particular the swevent triggers the above invertion, while the
tpevent PMU triggers a more elaborate one through their event_mutex.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Lockdep noticed the following 3-way lockup race:
perf_trace_init()
#0 mutex_lock(&event_mutex)
perf_trace_event_init()
perf_trace_event_reg()
tp_event->class->reg() := tracepoint_probe_register
#1 mutex_lock(&tracepoints_mutex)
trace_point_add_func()
#2 static_key_enable()
#2 do_cpu_up()
perf_event_init_cpu()
#3 mutex_lock(&pmus_lock)
#4 mutex_lock(&ctx->mutex)
perf_ioctl()
#4 ctx = perf_event_ctx_lock()
_perf_iotcl()
ftrace_profile_set_filter()
#0 mutex_lock(&event_mutex)
Fudge it for now by noting that the tracepoint state does not depend
on the event <-> context relation. Ugly though :/
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
One fixes a NULL dereference, and the other fixes
a flickering bug.
Cc: Eric Anholt <eric@anholt.net>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlpo1gAACgkQlvcN/ahK
Bwp8Dwf/cOHYKoyKmzzMNy4Myrsf0I8cF4efL9f1xw7Y/m/pp7c6Nxdfj0TCmVpd
AmLuxg8rSYrfdnzY5KZ/9nr8RYiWmnX5VIt8VapbZyWF20UUyqilPepHsBrI8lig
rczaOJ8kWL7FDHqXM0CXHQc6mhd7lqKXNfaAwUE3cE9yAve/4tTytrRBXzuhmMmH
AQYsf0Y7v4rv+4SJEZM4UA2n8+TV4WaY1nqjED37lIdApqntL9hR8056lpevWT3W
GgrakE8mZVFTu5KGIBCvZy3yehO/KJ0RIKvPwXJC9e8SMEcP35NuLw0+CetcNTrL
MYure0STUMH0VR9wGLKOh2+bn1106g==
=NPug
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2018-01-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Two vc4 fixes that were applied in the last day.
One fixes a NULL dereference, and the other fixes
a flickering bug.
Cc: Eric Anholt <eric@anholt.net>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
* tag 'drm-misc-fixes-2018-01-24' of git://anongit.freedesktop.org/drm/drm-misc:
drm/vc4: Fix NULL pointer dereference in vc4_save_hang_state()
drm/vc4: Flush the caches before the bin jobs, as well.
Pull networking fixes from David Miller:
1) Avoid negative netdev refcount in error flow of xfrm state add, from
Aviad Yehezkel.
2) Fix tcpdump decoding of IPSEC decap'd frames by filling in the
ethernet header protocol field in xfrm{4,6}_mode_tunnel_input().
From Yossi Kuperman.
3) Fix a syzbot triggered skb_under_panic in pppoe having to do with
failing to allocate an appropriate amount of headroom. From
Guillaume Nault.
4) Fix memory leak in vmxnet3 driver, from Neil Horman.
5) Cure out-of-bounds packet memory access in em_nbyte EMATCH module,
from Wolfgang Bumiller.
6) Restrict what kinds of sockets can be bound to the KCM multiplexer
and also disallow when another layer has attached to the socket and
made use of sk_user_data. From Tom Herbert.
7) Fix use before init of IOTLB in vhost code, from Jason Wang.
8) Correct STACR register write bit definition in IBM emac driver, from
Ivan Mikhaylov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net/ibm/emac: wrong bit is used for STA control register write
net/ibm/emac: add 8192 rx/tx fifo size
vhost: do not try to access device IOTLB when not initialized
vhost: use mutex_lock_nested() in vhost_dev_lock_vqs()
i40e: flower: check if TC offload is enabled on a netdev
qed: Free reserved MR tid
qed: Remove reserveration of dpi for kernel
kcm: Check if sk_user_data already set in kcm_attach
kcm: Only allow TCP sockets to be attached to a KCM mux
net: sched: fix TCF_LAYER_LINK case in tcf_get_base_ptr
net: sched: em_nbyte: don't add the data offset twice
mlxsw: spectrum_router: Don't log an error on missing neighbor
vmxnet3: repair memory leak
ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL
pppoe: take ->needed_headroom of lower device into account on xmit
xfrm: fix boolean assignment in xfrm_get_type_offload
xfrm: Fix eth_hdr(skb)->h_proto to reflect inner IP version
xfrm: fix error flow in case of add state fails
xfrm: Add SA to hardware at the end of xfrm_state_construct()
STA control register has areas of mode and opcodes for opeations. 18 bit is
using for mode selection, where 0 is old MIO/MDIO access method and 1 is
indirect access mode. 19-20 bits are using for setting up read/write
operation(STA opcodes). In current state 'read' is set into old MIO/MDIO mode
with 19 bit and write operation is set into 18 bit which is mode selection,
not a write operation. To correlate write with read we set it into 20 bit.
All those bit operations are MSB 0 based.
Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
emac4syn chips has availability to use 8192 rx/tx fifo buffer sizes,
in current state if we set it up in dts 8192 as example, we will get
only 2048 which may impact on network speed.
Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the sysfs attribute hangs off the RMI bus, which doesn't go away during
firmware flash, it needs to be explicitly removed, otherwise we would try and
register the same attribute twice.
This reverts commit 36a44af5c1.
Signed-off-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The code will try to access dev->iotlb when processing
VHOST_IOTLB_INVALIDATE even if it was not initialized which may lead
to NULL pointer dereference. Fixes this by check dev->iotlb before.
Fixes: 6b1e6cc785 ("vhost: new device IOTLB API")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We used to call mutex_lock() in vhost_dev_lock_vqs() which tries to
hold mutexes of all virtqueues. This may confuse lockdep to report a
possible deadlock because of trying to hold locks belong to same
class. Switch to use mutex_lock_nested() to avoid false positive.
Fixes: 6b1e6cc785 ("vhost: new device IOTLB API")
Reported-by: syzbot+dbb7c1161485e61b0241@syzkaller.appspotmail.com
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since TC block changes drivers are required to check if
the TC hw offload flag is set on the interface themselves.
Fixes: 2f4b411a3d ("i40e: Enable cloud filters via tc-flower")
Fixes: 44ae12a768 ("net: sched: move the can_offload check from binding phase to rule insertion phase")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Amritha Nambiar <amritha.nambiar@intel.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the typo CONFIG_CRYPTO_DES_SPARC64 => CONFIG_CRYPTO_CAMELLIA_SPARC64
Fixes: 81658ad0d9 ("sparc64: Add CAMELLIA driver making use of the new camellia opcodes.")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon says:
====================
qed: rdma bug fixes
This patch contains two small bug fixes related to RDMA.
Both related to resource reservations.
====================
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A tid was allocated for reserved MR during initialization but
not freed. This lead to an annoying output message during
rdma unload flow.
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Double reservation for kernel dedicated dpi was performed.
Once in the core module and once in qedr.
Remove the reservation from core.
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert says:
====================
kcm: fix two syzcaller issues
In this patch set:
- Don't allow attaching non-TCP or listener sockets to a KCM mux.
- In kcm_attach Check if sk_user_data is already set. This is
under lock to avoid race conditions. More work is need to make
all of the users of sk_user_data to use the same locking.
- v2
Remove unncessary check for not PF_KCM in kcm_attach (suggested by
Guillaume Nault)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is needed to prevent sk_user_data being overwritten.
The check is done under the callback lock. This should prevent
a socket from being attached twice to a KCM mux. It also prevents
a socket from being attached for other use cases of sk_user_data
as long as the other cases set sk_user_data under the lock.
Followup work is needed to unify all the use cases of sk_user_data
to use the same locking.
Reported-by: syzbot+114b15f2be420a8886c3@syzkaller.appspotmail.com
Fixes: ab7ac4eb98 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Tom Herbert <tom@quantonium.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP sockets for IPv4 and IPv6 that are not listeners or in closed
stated are allowed to be attached to a KCM mux.
Fixes: ab7ac4eb98 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot+8865eaff7f9acd593945@syzkaller.appspotmail.com
Signed-off-by: Tom Herbert <tom@quantonium.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
