Extend bench framework with ability to have benchmark-provided child argument
parser for custom benchmark-specific parameters. This makes bench generic code
modular and independent from any specific benchmark.
Also implement a set of benchmarks for new BPF ring buffer and existing perf
buffer. 4 benchmarks were implemented: 2 variations for each of BPF ringbuf
and perfbuf:,
- rb-libbpf utilizes stock libbpf ring_buffer manager for reading data;
- rb-custom implements custom ring buffer setup and reading code, to
eliminate overheads inherent in generic libbpf code due to callback
functions and the need to update consumer position after each consumed
record, instead of batching updates (due to pessimistic assumption that
user callback might take long time and thus could unnecessarily hold ring
buffer space for too long);
- pb-libbpf uses stock libbpf perf_buffer code with all the default
settings, though uses higher-performance raw event callback to minimize
unnecessary overhead;
- pb-custom implements its own custom consumer code to minimize any possible
overhead of generic libbpf implementation and indirect function calls.
All of the test support default, no data notification skipped, mode, as well
as sampled mode (with --rb-sampled flag), which allows to trigger epoll
notification less frequently and reduce overhead. As will be shown, this mode
is especially critical for perf buffer, which suffers from high overhead of
wakeups in kernel.
Otherwise, all benchamrks implement similar way to generate a batch of records
by using fentry/sys_getpgid BPF program, which pushes a bunch of records in
a tight loop and records number of successful and dropped samples. Each record
is a small 8-byte integer, to minimize the effect of memory copying with
bpf_perf_event_output() and bpf_ringbuf_output().
Benchmarks that have only one producer implement optional back-to-back mode,
in which record production and consumption is alternating on the same CPU.
This is the highest-throughput happy case, showing ultimate performance
achievable with either BPF ringbuf or perfbuf.
All the below scenarios are implemented in a script in
benchs/run_bench_ringbufs.sh. Tests were performed on 28-core/56-thread
Intel Xeon CPU E5-2680 v4 @ 2.40GHz CPU.
Single-producer, parallel producer
==================================
rb-libbpf 12.054 ± 0.320M/s (drops 0.000 ± 0.000M/s)
rb-custom 8.158 ± 0.118M/s (drops 0.001 ± 0.003M/s)
pb-libbpf 0.931 ± 0.007M/s (drops 0.000 ± 0.000M/s)
pb-custom 0.965 ± 0.003M/s (drops 0.000 ± 0.000M/s)
Single-producer, parallel producer, sampled notification
========================================================
rb-libbpf 11.563 ± 0.067M/s (drops 0.000 ± 0.000M/s)
rb-custom 15.895 ± 0.076M/s (drops 0.000 ± 0.000M/s)
pb-libbpf 9.889 ± 0.032M/s (drops 0.000 ± 0.000M/s)
pb-custom 9.866 ± 0.028M/s (drops 0.000 ± 0.000M/s)
Single producer on one CPU, consumer on another one, both running at full
speed. Curiously, rb-libbpf has higher throughput than objectively faster (due
to more lightweight consumer code path) rb-custom. It appears that faster
consumer causes kernel to send notifications more frequently, because consumer
appears to be caught up more frequently. Performance of perfbuf suffers from
default "no sampling" policy and huge overhead that causes.
In sampled mode, rb-custom is winning very significantly eliminating too
frequent in-kernel wakeups, the gain appears to be more than 2x.
Perf buffer achieves even more impressive wins, compared to stock perfbuf
settings, with 10x improvements in throughput with 1:500 sampling rate. The
trade-off is that with sampling, application might not get next X events until
X+1st arrives, which is not always acceptable. With steady influx of events,
though, this shouldn't be a problem.
Overall, single-producer performance of ring buffers seems to be better no
matter the sampled/non-sampled modes, but it especially beats ring buffer
without sampling due to its adaptive notification approach.
Single-producer, back-to-back mode
==================================
rb-libbpf 15.507 ± 0.247M/s (drops 0.000 ± 0.000M/s)
rb-libbpf-sampled 14.692 ± 0.195M/s (drops 0.000 ± 0.000M/s)
rb-custom 21.449 ± 0.157M/s (drops 0.000 ± 0.000M/s)
rb-custom-sampled 20.024 ± 0.386M/s (drops 0.000 ± 0.000M/s)
pb-libbpf 1.601 ± 0.015M/s (drops 0.000 ± 0.000M/s)
pb-libbpf-sampled 8.545 ± 0.064M/s (drops 0.000 ± 0.000M/s)
pb-custom 1.607 ± 0.022M/s (drops 0.000 ± 0.000M/s)
pb-custom-sampled 8.988 ± 0.144M/s (drops 0.000 ± 0.000M/s)
Here we test a back-to-back mode, which is arguably best-case scenario both
for BPF ringbuf and perfbuf, because there is no contention and for ringbuf
also no excessive notification, because consumer appears to be behind after
the first record. For ringbuf, custom consumer code clearly wins with 21.5 vs
16 million records per second exchanged between producer and consumer. Sampled
mode actually hurts a bit due to slightly slower producer logic (it needs to
fetch amount of data available to decide whether to skip or force notification).
Perfbuf with wakeup sampling gets 5.5x throughput increase, compared to
no-sampling version. There also doesn't seem to be noticeable overhead from
generic libbpf handling code.
Perfbuf back-to-back, effect of sample rate
===========================================
pb-sampled-1 1.035 ± 0.012M/s (drops 0.000 ± 0.000M/s)
pb-sampled-5 3.476 ± 0.087M/s (drops 0.000 ± 0.000M/s)
pb-sampled-10 5.094 ± 0.136M/s (drops 0.000 ± 0.000M/s)
pb-sampled-25 7.118 ± 0.153M/s (drops 0.000 ± 0.000M/s)
pb-sampled-50 8.169 ± 0.156M/s (drops 0.000 ± 0.000M/s)
pb-sampled-100 8.887 ± 0.136M/s (drops 0.000 ± 0.000M/s)
pb-sampled-250 9.180 ± 0.209M/s (drops 0.000 ± 0.000M/s)
pb-sampled-500 9.353 ± 0.281M/s (drops 0.000 ± 0.000M/s)
pb-sampled-1000 9.411 ± 0.217M/s (drops 0.000 ± 0.000M/s)
pb-sampled-2000 9.464 ± 0.167M/s (drops 0.000 ± 0.000M/s)
pb-sampled-3000 9.575 ± 0.273M/s (drops 0.000 ± 0.000M/s)
This benchmark shows the effect of event sampling for perfbuf. Back-to-back
mode for highest throughput. Just doing every 5th record notification gives
3.5x speed up. 250-500 appears to be the point of diminishing return, with
almost 9x speed up. Most benchmarks use 500 as the default sampling for pb-raw
and pb-custom.
Ringbuf back-to-back, effect of sample rate
===========================================
rb-sampled-1 1.106 ± 0.010M/s (drops 0.000 ± 0.000M/s)
rb-sampled-5 4.746 ± 0.149M/s (drops 0.000 ± 0.000M/s)
rb-sampled-10 7.706 ± 0.164M/s (drops 0.000 ± 0.000M/s)
rb-sampled-25 12.893 ± 0.273M/s (drops 0.000 ± 0.000M/s)
rb-sampled-50 15.961 ± 0.361M/s (drops 0.000 ± 0.000M/s)
rb-sampled-100 18.203 ± 0.445M/s (drops 0.000 ± 0.000M/s)
rb-sampled-250 19.962 ± 0.786M/s (drops 0.000 ± 0.000M/s)
rb-sampled-500 20.881 ± 0.551M/s (drops 0.000 ± 0.000M/s)
rb-sampled-1000 21.317 ± 0.532M/s (drops 0.000 ± 0.000M/s)
rb-sampled-2000 21.331 ± 0.535M/s (drops 0.000 ± 0.000M/s)
rb-sampled-3000 21.688 ± 0.392M/s (drops 0.000 ± 0.000M/s)
Similar benchmark for ring buffer also shows a great advantage (in terms of
throughput) of skipping notifications. Skipping every 5th one gives 4x boost.
Also similar to perfbuf case, 250-500 seems to be the point of diminishing
returns, giving roughly 20x better results.
Keep in mind, for this test, notifications are controlled manually with
BPF_RB_NO_WAKEUP and BPF_RB_FORCE_WAKEUP. As can be seen from previous
benchmarks, adaptive notifications based on consumer's positions provides same
(or even slightly better due to simpler load generator on BPF side) benefits in
favorable back-to-back scenario. Over zealous and fast consumer, which is
almost always caught up, will make thoughput numbers smaller. That's the case
when manual notification control might prove to be extremely beneficial.
Ringbuf back-to-back, reserve+commit vs output
==============================================
reserve 22.819 ± 0.503M/s (drops 0.000 ± 0.000M/s)
output 18.906 ± 0.433M/s (drops 0.000 ± 0.000M/s)
Ringbuf sampled, reserve+commit vs output
=========================================
reserve-sampled 15.350 ± 0.132M/s (drops 0.000 ± 0.000M/s)
output-sampled 14.195 ± 0.144M/s (drops 0.000 ± 0.000M/s)
BPF ringbuf supports two sets of APIs with various usability and performance
tradeoffs: bpf_ringbuf_reserve()+bpf_ringbuf_commit() vs bpf_ringbuf_output().
This benchmark clearly shows superiority of reserve+commit approach, despite
using a small 8-byte record size.
Single-producer, consumer/producer competing on the same CPU, low batch count
=============================================================================
rb-libbpf 3.045 ± 0.020M/s (drops 3.536 ± 0.148M/s)
rb-custom 3.055 ± 0.022M/s (drops 3.893 ± 0.066M/s)
pb-libbpf 1.393 ± 0.024M/s (drops 0.000 ± 0.000M/s)
pb-custom 1.407 ± 0.016M/s (drops 0.000 ± 0.000M/s)
This benchmark shows one of the worst-case scenarios, in which producer and
consumer do not coordinate *and* fight for the same CPU. No batch count and
sampling settings were able to eliminate drops for ringbuffer, producer is
just too fast for consumer to keep up. But ringbuf and perfbuf still able to
pass through quite a lot of messages, which is more than enough for a lot of
applications.
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 10.916 ± 0.399M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 2 4.931 ± 0.030M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 3 4.880 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 4 3.926 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 8 4.011 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 12 3.967 ± 0.016M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 16 2.604 ± 0.030M/s (drops 0.001 ± 0.002M/s)
rb-libbpf nr_prod 20 2.233 ± 0.003M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 24 2.085 ± 0.015M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 28 2.055 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 32 1.962 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 36 2.089 ± 0.005M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 40 2.118 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 44 2.105 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 48 2.120 ± 0.058M/s (drops 0.000 ± 0.001M/s)
rb-libbpf nr_prod 52 2.074 ± 0.024M/s (drops 0.007 ± 0.014M/s)
Ringbuf uses a very short-duration spinlock during reservation phase, to check
few invariants, increment producer count and set record header. This is the
biggest point of contention for ringbuf implementation. This benchmark
evaluates the effect of multiple competing writers on overall throughput of
a single shared ringbuffer.
Overall throughput drops almost 2x when going from single to two
highly-contended producers, gradually dropping with additional competing
producers. Performance drop stabilizes at around 20 producers and hovers
around 2mln even with 50+ fighting producers, which is a 5x drop compared to
non-contended case. Good kernel implementation in kernel helps maintain decent
performance here.
Note, that in the intended real-world scenarios, it's not expected to get even
close to such a high levels of contention. But if contention will become
a problem, there is always an option of sharding few ring buffers across a set
of CPUs.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-5-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Both singleton BPF ringbuf and BPF ringbuf with map-in-map use cases are tested.
Also reserve+submit/discards and output variants of API are validated.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-4-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Declaring and instantiating BPF ring buffer doesn't require any changes to
libbpf, as it's just another type of maps. So using existing BTF-defined maps
syntax with __uint(type, BPF_MAP_TYPE_RINGBUF) and __uint(max_elements,
<size-of-ring-buf>) is all that's necessary to create and use BPF ring buffer.
This patch adds BPF ring buffer consumer to libbpf. It is very similar to
perf_buffer implementation in terms of API, but also attempts to fix some
minor problems and inconveniences with existing perf_buffer API.
ring_buffer support both single ring buffer use case (with just using
ring_buffer__new()), as well as allows to add more ring buffers, each with its
own callback and context. This allows to efficiently poll and consume
multiple, potentially completely independent, ring buffers, using single
epoll instance.
The latter is actually a problem in practice for applications
that are using multiple sets of perf buffers. They have to create multiple
instances for struct perf_buffer and poll them independently or in a loop,
each approach having its own problems (e.g., inability to use a common poll
timeout). struct ring_buffer eliminates this problem by aggregating many
independent ring buffer instances under the single "ring buffer manager".
Second, perf_buffer's callback can't return error, so applications that need
to stop polling due to error in data or data signalling the end, have to use
extra mechanisms to signal that polling has to stop. ring_buffer's callback
can return error, which will be passed through back to user code and can be
acted upon appropariately.
Two APIs allow to consume ring buffer data:
- ring_buffer__poll(), which will wait for data availability notification
and will consume data only from reported ring buffer(s); this API allows
to efficiently use resources by reading data only when it becomes
available;
- ring_buffer__consume(), will attempt to read new records regardless of
data availablity notification sub-system. This API is useful for cases
when lowest latency is required, in expense of burning CPU resources.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-3-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit adds a new MPSC ring buffer implementation into BPF ecosystem,
which allows multiple CPUs to submit data to a single shared ring buffer. On
the consumption side, only single consumer is assumed.
Motivation
----------
There are two distinctive motivators for this work, which are not satisfied by
existing perf buffer, which prompted creation of a new ring buffer
implementation.
- more efficient memory utilization by sharing ring buffer across CPUs;
- preserving ordering of events that happen sequentially in time, even
across multiple CPUs (e.g., fork/exec/exit events for a task).
These two problems are independent, but perf buffer fails to satisfy both.
Both are a result of a choice to have per-CPU perf ring buffer. Both can be
also solved by having an MPSC implementation of ring buffer. The ordering
problem could technically be solved for perf buffer with some in-kernel
counting, but given the first one requires an MPSC buffer, the same solution
would solve the second problem automatically.
Semantics and APIs
------------------
Single ring buffer is presented to BPF programs as an instance of BPF map of
type BPF_MAP_TYPE_RINGBUF. Two other alternatives considered, but ultimately
rejected.
One way would be to, similar to BPF_MAP_TYPE_PERF_EVENT_ARRAY, make
BPF_MAP_TYPE_RINGBUF could represent an array of ring buffers, but not enforce
"same CPU only" rule. This would be more familiar interface compatible with
existing perf buffer use in BPF, but would fail if application needed more
advanced logic to lookup ring buffer by arbitrary key. HASH_OF_MAPS addresses
this with current approach. Additionally, given the performance of BPF
ringbuf, many use cases would just opt into a simple single ring buffer shared
among all CPUs, for which current approach would be an overkill.
Another approach could introduce a new concept, alongside BPF map, to
represent generic "container" object, which doesn't necessarily have key/value
interface with lookup/update/delete operations. This approach would add a lot
of extra infrastructure that has to be built for observability and verifier
support. It would also add another concept that BPF developers would have to
familiarize themselves with, new syntax in libbpf, etc. But then would really
provide no additional benefits over the approach of using a map.
BPF_MAP_TYPE_RINGBUF doesn't support lookup/update/delete operations, but so
doesn't few other map types (e.g., queue and stack; array doesn't support
delete, etc).
The approach chosen has an advantage of re-using existing BPF map
infrastructure (introspection APIs in kernel, libbpf support, etc), being
familiar concept (no need to teach users a new type of object in BPF program),
and utilizing existing tooling (bpftool). For common scenario of using
a single ring buffer for all CPUs, it's as simple and straightforward, as
would be with a dedicated "container" object. On the other hand, by being
a map, it can be combined with ARRAY_OF_MAPS and HASH_OF_MAPS map-in-maps to
implement a wide variety of topologies, from one ring buffer for each CPU
(e.g., as a replacement for perf buffer use cases), to a complicated
application hashing/sharding of ring buffers (e.g., having a small pool of
ring buffers with hashed task's tgid being a look up key to preserve order,
but reduce contention).
Key and value sizes are enforced to be zero. max_entries is used to specify
the size of ring buffer and has to be a power of 2 value.
There are a bunch of similarities between perf buffer
(BPF_MAP_TYPE_PERF_EVENT_ARRAY) and new BPF ring buffer semantics:
- variable-length records;
- if there is no more space left in ring buffer, reservation fails, no
blocking;
- memory-mappable data area for user-space applications for ease of
consumption and high performance;
- epoll notifications for new incoming data;
- but still the ability to do busy polling for new data to achieve the
lowest latency, if necessary.
BPF ringbuf provides two sets of APIs to BPF programs:
- bpf_ringbuf_output() allows to *copy* data from one place to a ring
buffer, similarly to bpf_perf_event_output();
- bpf_ringbuf_reserve()/bpf_ringbuf_commit()/bpf_ringbuf_discard() APIs
split the whole process into two steps. First, a fixed amount of space is
reserved. If successful, a pointer to a data inside ring buffer data area
is returned, which BPF programs can use similarly to a data inside
array/hash maps. Once ready, this piece of memory is either committed or
discarded. Discard is similar to commit, but makes consumer ignore the
record.
bpf_ringbuf_output() has disadvantage of incurring extra memory copy, because
record has to be prepared in some other place first. But it allows to submit
records of the length that's not known to verifier beforehand. It also closely
matches bpf_perf_event_output(), so will simplify migration significantly.
bpf_ringbuf_reserve() avoids the extra copy of memory by providing a memory
pointer directly to ring buffer memory. In a lot of cases records are larger
than BPF stack space allows, so many programs have use extra per-CPU array as
a temporary heap for preparing sample. bpf_ringbuf_reserve() avoid this needs
completely. But in exchange, it only allows a known constant size of memory to
be reserved, such that verifier can verify that BPF program can't access
memory outside its reserved record space. bpf_ringbuf_output(), while slightly
slower due to extra memory copy, covers some use cases that are not suitable
for bpf_ringbuf_reserve().
The difference between commit and discard is very small. Discard just marks
a record as discarded, and such records are supposed to be ignored by consumer
code. Discard is useful for some advanced use-cases, such as ensuring
all-or-nothing multi-record submission, or emulating temporary malloc()/free()
within single BPF program invocation.
Each reserved record is tracked by verifier through existing
reference-tracking logic, similar to socket ref-tracking. It is thus
impossible to reserve a record, but forget to submit (or discard) it.
bpf_ringbuf_query() helper allows to query various properties of ring buffer.
Currently 4 are supported:
- BPF_RB_AVAIL_DATA returns amount of unconsumed data in ring buffer;
- BPF_RB_RING_SIZE returns the size of ring buffer;
- BPF_RB_CONS_POS/BPF_RB_PROD_POS returns current logical possition of
consumer/producer, respectively.
Returned values are momentarily snapshots of ring buffer state and could be
off by the time helper returns, so this should be used only for
debugging/reporting reasons or for implementing various heuristics, that take
into account highly-changeable nature of some of those characteristics.
One such heuristic might involve more fine-grained control over poll/epoll
notifications about new data availability in ring buffer. Together with
BPF_RB_NO_WAKEUP/BPF_RB_FORCE_WAKEUP flags for output/commit/discard helpers,
it allows BPF program a high degree of control and, e.g., more efficient
batched notifications. Default self-balancing strategy, though, should be
adequate for most applications and will work reliable and efficiently already.
Design and implementation
-------------------------
This reserve/commit schema allows a natural way for multiple producers, either
on different CPUs or even on the same CPU/in the same BPF program, to reserve
independent records and work with them without blocking other producers. This
means that if BPF program was interruped by another BPF program sharing the
same ring buffer, they will both get a record reserved (provided there is
enough space left) and can work with it and submit it independently. This
applies to NMI context as well, except that due to using a spinlock during
reservation, in NMI context, bpf_ringbuf_reserve() might fail to get a lock,
in which case reservation will fail even if ring buffer is not full.
The ring buffer itself internally is implemented as a power-of-2 sized
circular buffer, with two logical and ever-increasing counters (which might
wrap around on 32-bit architectures, that's not a problem):
- consumer counter shows up to which logical position consumer consumed the
data;
- producer counter denotes amount of data reserved by all producers.
Each time a record is reserved, producer that "owns" the record will
successfully advance producer counter. At that point, data is still not yet
ready to be consumed, though. Each record has 8 byte header, which contains
the length of reserved record, as well as two extra bits: busy bit to denote
that record is still being worked on, and discard bit, which might be set at
commit time if record is discarded. In the latter case, consumer is supposed
to skip the record and move on to the next one. Record header also encodes
record's relative offset from the beginning of ring buffer data area (in
pages). This allows bpf_ringbuf_commit()/bpf_ringbuf_discard() to accept only
the pointer to the record itself, without requiring also the pointer to ring
buffer itself. Ring buffer memory location will be restored from record
metadata header. This significantly simplifies verifier, as well as improving
API usability.
Producer counter increments are serialized under spinlock, so there is
a strict ordering between reservations. Commits, on the other hand, are
completely lockless and independent. All records become available to consumer
in the order of reservations, but only after all previous records where
already committed. It is thus possible for slow producers to temporarily hold
off submitted records, that were reserved later.
Reservation/commit/consumer protocol is verified by litmus tests in
Documentation/litmus-test/bpf-rb.
One interesting implementation bit, that significantly simplifies (and thus
speeds up as well) implementation of both producers and consumers is how data
area is mapped twice contiguously back-to-back in the virtual memory. This
allows to not take any special measures for samples that have to wrap around
at the end of the circular buffer data area, because the next page after the
last data page would be first data page again, and thus the sample will still
appear completely contiguous in virtual memory. See comment and a simple ASCII
diagram showing this visually in bpf_ringbuf_area_alloc().
Another feature that distinguishes BPF ringbuf from perf ring buffer is
a self-pacing notifications of new data being availability.
bpf_ringbuf_commit() implementation will send a notification of new record
being available after commit only if consumer has already caught up right up
to the record being committed. If not, consumer still has to catch up and thus
will see new data anyways without needing an extra poll notification.
Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbuf.c) show that
this allows to achieve a very high throughput without having to resort to
tricks like "notify only every Nth sample", which are necessary with perf
buffer. For extreme cases, when BPF program wants more manual control of
notifications, commit/discard/output helpers accept BPF_RB_NO_WAKEUP and
BPF_RB_FORCE_WAKEUP flags, which give full control over notifications of data
availability, but require extra caution and diligence in using this API.
Comparison to alternatives
--------------------------
Before considering implementing BPF ring buffer from scratch existing
alternatives in kernel were evaluated, but didn't seem to meet the needs. They
largely fell into few categores:
- per-CPU buffers (perf, ftrace, etc), which don't satisfy two motivations
outlined above (ordering and memory consumption);
- linked list-based implementations; while some were multi-producer designs,
consuming these from user-space would be very complicated and most
probably not performant; memory-mapping contiguous piece of memory is
simpler and more performant for user-space consumers;
- io_uring is SPSC, but also requires fixed-sized elements. Naively turning
SPSC queue into MPSC w/ lock would have subpar performance compared to
locked reserve + lockless commit, as with BPF ring buffer. Fixed sized
elements would be too limiting for BPF programs, given existing BPF
programs heavily rely on variable-sized perf buffer already;
- specialized implementations (like a new printk ring buffer, [0]) with lots
of printk-specific limitations and implications, that didn't seem to fit
well for intended use with BPF programs.
[0] https://lwn.net/Articles/779550/
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-2-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For write-only stacks and queues bpf_map_update_elem should be allowed, but
bpf_map_lookup_elem and bpf_map_lookup_and_delete_elem should fail with EPERM.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200527185700.14658-6-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make comments inside the test_map_rdonly and test_map_wronly tests
consistent with logic.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200527185700.14658-4-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test_map_rdonly and test_map_wronly tests should close file descriptors
which they open.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200527185700.14658-3-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Trivial fix to a typo in the test_map_wronly test: "read" -> "write"
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200527185700.14658-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In case the cpu_bufs are sparsely allocated they are not all
free'ed. These changes will fix this.
Fixes: fb84b82246 ("libbpf: add perf buffer API")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159056888305.330763.9684536967379110349.stgit@ebuild
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lets test using probe* in SCHED_CLS network programs as well just
to be sure these keep working. Its cheap to add the extra test
and provides a second context to test outside of sk_msg after
we generalized probe* helpers to all networking types.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159033911685.12355.15951980509828906214.stgit@john-Precision-5820-Tower
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test itself is not particularly useful but it encodes a common
pattern we have.
Namely do a sk storage lookup then depending on data here decide if
we need to do more work or alternatively allow packet to PASS. Then
if we need to do more work consult task_struct for more information
about the running task. Finally based on this additional information
drop or pass the data. In this case the suspicious check is not so
realisitic but it encodes the general pattern and uses the helpers
so we test the workflow.
This is a load test to ensure verifier correctly handles this case.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159033909665.12355.6166415847337547879.stgit@john-Precision-5820-Tower
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since dynamic symbols are used for dynamic linking it makes sense to
use them (readelf --dyn-syms) for abi check.
Found with some configuration on powerpc where linker puts
local *.plt_call.* symbols into .so.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200525061846.16524-1-yauheni.kaliuta@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current 'make install' results in only pkg-config and library binaries
being installed. For consistency also install headers as part of
"make install"
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200526174612.5447-1-nborisov@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This new API, perf_buffer__consume, can be used as follows:
- When you have a perf ring where wakeup_events is higher than 1,
and you have remaining data in the rings you would like to pull
out on exit (or maybe based on a timeout).
- For low latency cases where you burn a CPU that constantly polls
the queues.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159048487929.89441.7465713173442594608.stgit@ebuild
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
btf__parse_raw and btf__parse_elf return negative error numbers wrapped
in an ERR_PTR, so the extracted value needs to be negated before passing
them to strerror which expects a positive error number.
Before:
Error: failed to load BTF from .../vmlinux: Unknown error -2
After:
Error: failed to load BTF from .../vmlinux: No such file or directory
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200525135421.4154-1-tklauser@distanz.ch
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Following the introduction of CAP_BPF, and the switch from CAP_SYS_ADMIN
to other capabilities for various BPF features, update the capability
checks (and potentially, drops) in bpftool for feature probes. Because
bpftool and/or the system might not know of CAP_BPF yet, some caution is
necessary:
- If compiled and run on a system with CAP_BPF, check CAP_BPF,
CAP_SYS_ADMIN, CAP_PERFMON, CAP_NET_ADMIN.
- Guard against CAP_BPF being undefined, to allow compiling bpftool from
latest sources on older systems. If the system where feature probes
are run does not know of CAP_BPF, stop checking after CAP_SYS_ADMIN,
as this should be the only capability required for all the BPF
probing.
- If compiled from latest sources on a system without CAP_BPF, but later
executed on a newer system with CAP_BPF knowledge, then we only test
CAP_SYS_ADMIN. Some probes may fail if the bpftool process has
CAP_SYS_ADMIN but misses the other capabilities. The alternative would
be to redefine the value for CAP_BPF in bpftool, but this does not
look clean, and the case sounds relatively rare anyway.
Note that libcap offers a cap_to_name() function to retrieve the name of
a given capability (e.g. "cap_sys_admin"). We do not use it because
deriving the names from the macros looks simpler than using
cap_to_name() (doing a strdup() on the string) + cap_free() + handling
the case of failed allocations, when we just want to use the name of the
capability in an error message.
The checks when compiling without libcap (i.e. root versus non-root) are
unchanged.
v2:
- Do not allocate cap_list dynamically.
- Drop BPF-related capabilities when running with "unprivileged", even
if we didn't have the full set in the first place (in v1, we would
skip dropping them in that case).
- Keep track of what capabilities we have, print the names of the
missing ones for privileged probing.
- Attempt to drop only the capabilities we actually have.
- Rename a couple variables.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200523010247.20654-1-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This is a clean-up for the formatting of the do_help functions for
bpftool's subcommands. The following fixes are included:
- Do not use argv[-2] for "iter" help message, as the help is shown by
default if no "iter" action is selected, resulting in messages looking
like "./bpftool bpftool pin...".
- Do not print unused HELP_SPEC_PROGRAM in help message for "bpftool
link".
- Andrii used argument indexing to avoid having multiple occurrences of
bin_name and argv[-2] in the fprintf() for the help message, for
"bpftool gen" and "bpftool link". Let's reuse this for all other help
functions. We can remove up to thirty arguments for the "bpftool map"
help message.
- Harmonise all functions, e.g. use ending quotes-comma on a separate
line.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200523010751.23465-1-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
perf record:
- Introduce --switch-output-event to use arbitrary events to be setup
and read from a side band thread and, when they take place a signal
be sent to the main 'perf record' thread, reusing the --switch-output
code to take perf.data snapshots from the --overwrite ring buffer, e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
- Add --num-synthesize-threads option to control degree of parallelism of the
synthesize_mmap() code which is scanning /proc/PID/task/PID/maps and can be
time consuming. This mimics pre-existing behaviour in 'perf top'.
perf bench:
- Add a multi-threaded synthesize benchmark.
- Add kallsyms parsing benchmark.
Intel PT support:
- Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
- Allow using Intel PT to synthesize callchains for regular events.
- Add support for synthesizing branch stacks for regular events (cycles,
instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=i27M
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Add AMD Fam17h RAPL support
- Introduce CAP_PERFMON to kernel and user space
- Add Zhaoxin CPU support
- Misc fixes and cleanups
Tooling changes:
- perf record:
Introduce '--switch-output-event' to use arbitrary events to be
setup and read from a side band thread and, when they take place a
signal be sent to the main 'perf record' thread, reusing the core
for '--switch-output' to take perf.data snapshots from the ring
buffer used for '--overwrite', e.g.:
# perf record --overwrite -e sched:* \
--switch-output-event syscalls:*connect* \
workload
will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
connect syscalls.
Add '--num-synthesize-threads' option to control degree of
parallelism of the synthesize_mmap() code which is scanning
/proc/PID/task/PID/maps and can be time consuming. This mimics
pre-existing behaviour in 'perf top'.
- perf bench:
Add a multi-threaded synthesize benchmark and kallsyms parsing
benchmark.
- Intel PT support:
Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
Allow using Intel PT to synthesize callchains for regular events.
Add support for synthesizing branch stacks for regular events
(cycles, instructions, etc) from Intel PT data.
Misc changes:
- Updated perf vendor events for power9 and Coresight.
- Add flamegraph.py script via 'perf flamegraph'
- Misc other changes, fixes and cleanups - see the Git log for details
Also, since over the last couple of years perf tooling has matured and
decoupled from the kernel perf changes to a large degree, going
forward Arnaldo is going to send perf tooling changes via direct pull
requests"
* tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (163 commits)
perf/x86/rapl: Add AMD Fam17h RAPL support
perf/x86/rapl: Make perf_probe_msr() more robust and flexible
perf/x86/rapl: Flip logic on default events visibility
perf/x86/rapl: Refactor to share the RAPL code between Intel and AMD CPUs
perf/x86/rapl: Move RAPL support to common x86 code
perf/core: Replace zero-length array with flexible-array
perf/x86: Replace zero-length array with flexible-array
perf/x86/intel: Add more available bits for OFFCORE_RESPONSE of Intel Tremont
perf/x86/rapl: Add Ice Lake RAPL support
perf flamegraph: Use /bin/bash for report and record scripts
perf cs-etm: Move definition of 'traceid_list' global variable from header file
libsymbols kallsyms: Move hex2u64 out of header
libsymbols kallsyms: Parse using io api
perf bench: Add kallsyms parsing
perf: cs-etm: Update to build with latest opencsd version.
perf symbol: Fix kernel symbol address display
perf inject: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf annotate: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf trace: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
perf script: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
...
The identation before this code
(`if not os.path.exists(cli_args.build_dir):``)
was with spaces instead of tabs after fixed up merge conflits,
this commit revert spaces to tabs:
[iha@bbking linux]$ tools/testing/kunit/kunit.py run
File "tools/testing/kunit/kunit.py", line 247
if not linux:
^
TabError: inconsistent use of tabs and spaces in indentation
[iha@bbking linux]$ tools/testing/kunit/kunit.py run
Traceback (most recent call last):
File "tools/testing/kunit/kunit.py", line 338, in <module>
main(sys.argv[1:])
File "tools/testing/kunit/kunit.py", line 215, in main
add_config_opts(config_parser)
[iha@bbking linux]$ tools/testing/kunit/kunit.py run
Traceback (most recent call last):
File "tools/testing/kunit/kunit.py", line 337, in <module>
main(sys.argv[1:])
File "tools/testing/kunit/kunit.py", line 255, in main
result = run_tests(linux, request)
File "tools/testing/kunit/kunit.py", line 133, in run_tests
request.defconfig,
AttributeError: 'KunitRequest' object has no attribute 'defconfig'
Handles when there is no .kunitconfig, the error due to merge conflicts
between the following:
commit 9bdf64b351 ("kunit: use KUnit defconfig by default")
commit 45ba7a893a ("kunit: kunit_tool: Separate out
config/build/exec/parse")
[iha@bbking linux]$ tools/testing/kunit/kunit.py run
Traceback (most recent call last):
File "tools/testing/kunit/kunit.py", line 335, in <module>
main(sys.argv[1:])
File "tools/testing/kunit/kunit.py", line 246, in main
linux = kunit_kernel.LinuxSourceTree()
File "../tools/testing/kunit/kunit_kernel.py", line 109, in __init__
self._kconfig.read_from_file(kunitconfig_path)
File "t../ools/testing/kunit/kunit_config.py", line 88, in read_from_file
with open(path, 'r') as f:
FileNotFoundError: [Errno 2] No such file or directory: '.kunit/.kunitconfig'
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
- Speed up objtool significantly, especially when there are large number of sections
- Improve objtool's understanding of special instructions such as IRET,
to reduce the number of annotations required
- Implement 'noinstr' validation
- Do baby steps for non-x86 objtool use
- Simplify/fix retpoline decoding
- Add vmlinux validation
- Improve documentation
- Fix various bugs and apply smaller cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=dbCU
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"There are a lot of objtool changes in this cycle, all across the map:
- Speed up objtool significantly, especially when there are large
number of sections
- Improve objtool's understanding of special instructions such as
IRET, to reduce the number of annotations required
- Implement 'noinstr' validation
- Do baby steps for non-x86 objtool use
- Simplify/fix retpoline decoding
- Add vmlinux validation
- Improve documentation
- Fix various bugs and apply smaller cleanups"
* tag 'objtool-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
objtool: Enable compilation of objtool for all architectures
objtool: Move struct objtool_file into arch-independent header
objtool: Exit successfully when requesting help
objtool: Add check_kcov_mode() to the uaccess safelist
samples/ftrace: Fix asm function ELF annotations
objtool: optimize add_dead_ends for split sections
objtool: use gelf_getsymshndx to handle >64k sections
objtool: Allow no-op CFI ops in alternatives
x86/retpoline: Fix retpoline unwind
x86: Change {JMP,CALL}_NOSPEC argument
x86: Simplify retpoline declaration
x86/speculation: Change FILL_RETURN_BUFFER to work with objtool
objtool: Add support for intra-function calls
objtool: Move the IRET hack into the arch decoder
objtool: Remove INSN_STACK
objtool: Make handle_insn_ops() unconditional
objtool: Rework allocating stack_ops on decode
objtool: UNWIND_HINT_RET_OFFSET should not check registers
objtool: is_fentry_call() crashes if call has no destination
x86,smap: Fix smap_{save,restore}() alternatives
...
- RCU-tasks update, including addition of RCU Tasks Trace for
BPF use and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Yisx
-----END PGP SIGNATURE-----
Merge tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The RCU updates for this cycle were:
- RCU-tasks update, including addition of RCU Tasks Trace for BPF use
and TASKS_RUDE_RCU
- kfree_rcu() updates.
- Remove scheduler locking restriction
- RCU CPU stall warning updates.
- Torture-test updates.
- Miscellaneous fixes and other updates"
* tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
rcu: Allow for smp_call_function() running callbacks from idle
rcu: Provide rcu_irq_exit_check_preempt()
rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()
rcu: Provide __rcu_is_watching()
rcu: Provide rcu_irq_exit_preempt()
rcu: Make RCU IRQ enter/exit functions rely on in_nmi()
rcu/tree: Mark the idle relevant functions noinstr
x86: Replace ist_enter() with nmi_enter()
x86/mce: Send #MC singal from task work
x86/entry: Get rid of ist_begin/end_non_atomic()
sched,rcu,tracing: Avoid tracing before in_nmi() is correct
sh/ftrace: Move arch_ftrace_nmi_{enter,exit} into nmi exception
lockdep: Always inline lockdep_{off,on}()
hardirq/nmi: Allow nested nmi_enter()
arm64: Prepare arch_nmi_enter() for recursion
printk: Disallow instrumenting print_nmi_enter()
printk: Prepare for nested printk_nmi_enter()
rcutorture: Convert ULONG_CMP_LT() to time_before()
torture: Add a --kasan argument
torture: Save a few lines by using config_override_param initially
...
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage (WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)
-----BEGIN PGP SIGNATURE-----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=7s1u
-----END PGP SIGNATURE-----
Merge tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
"Fixes and new features for pstore.
This is a pretty big set of changes (relative to past pstore pulls),
but it has been in -next for a while. The biggest change here is the
ability to support a block device as a pstore backend, which has been
desired for a while. A lot of additional fixes and refactorings are
also included, mostly in support of the new features.
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees
Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage
(WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)"
* tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (35 commits)
mtd: Support kmsg dumper based on pstore/blk
pstore/blk: Introduce "best_effort" mode
pstore/blk: Support non-block storage devices
pstore/blk: Provide way to query pstore configuration
pstore/zone: Provide way to skip "broken" zone for MTD devices
Documentation: Add details for pstore/blk
pstore/zone,blk: Add ftrace frontend support
pstore/zone,blk: Add console frontend support
pstore/zone,blk: Add support for pmsg frontend
pstore/blk: Introduce backend for block devices
pstore/zone: Introduce common layer to manage storage zones
ramoops: Add "max-reason" optional field to ramoops DT node
pstore/ram: Introduce max_reason and convert dump_oops
pstore/platform: Pass max_reason to kmesg dump
printk: Introduce kmsg_dump_reason_str()
printk: honor the max_reason field in kmsg_dumper
printk: Collapse shutdown types into a single dump reason
pstore/ftrace: Provide ftrace log merging routine
pstore/ram: Refactor ftrace buffer merging
pstore/ram: Refactor DT size parsing
...
Generate packets matching the various control traps and check that the
traps' stats increase accordingly.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sh5 never became a product and has probably never really worked.
Remove it by recursively deleting all associated Kconfig options
and all corresponding files.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rich Felker <dalias@libc.org>
This has been a very active release for the DesignWare driver in
particular - after a long period of inactivity we have had a lot of
people actively working on it for unrelated reasons this cycle with some
of that work still not landed. Otherwise it's been fairly quiet for the
subsystem. Highlights include:
- Lots of performance improvements and fixes for the DesignWare driver
from Serge Semin, Andy Shevchenko, Wan Ahmad Zainie, Clement Leger,
Dinh Nguyen and Jarkko Nikula.
- Support for octal mode transfers in spidev.
- Slave mode support for the Rockchip drivers.
- Support for AMD controllers, Broadcom mspi and Raspberry Pi 4,
and Intel Elkhart Lake.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl7U6r0THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0LasB/9npXOMe6tOT03YqtIhN4pxrdUo+LsN
A5Rc8prfQo7srnIZMndt5/wcTftomVdvjSNrtyXMXtzj+Logx01Pndrr6UVUP6Qq
Sy0R+4QXBSlj5QtUOBvGFTlzKw2BEaOBYftxVKQM6s4eoefvl0BFALHpEeaHvsDO
YXfwU8EK6sZylDzvsuVy2uoJlTcY4+wKop7JWY5Ze+LTUjsuJQVEG9zbxpZNEpOn
ZHO3FVS2MlIAuhcVmy0TfvYxTldTrT89zv8x4sKaPaXwDJFzYjJBwz77vYAjD8u5
i52JhrAMkZyU4SZdnciJLJx9oTdT8+Rj32oQBU6uK8nRN7U3zflNHHQw
=qm1J
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This has been a very active release for the DesignWare driver in
particular - after a long period of inactivity we have had a lot of
people actively working on it for unrelated reasons this cycle with
some of that work still not landed.
Otherwise it's been fairly quiet for the subsystem.
Highlights include:
- Lots of performance improvements and fixes for the DesignWare
driver from Serge Semin, Andy Shevchenko, Wan Ahmad Zainie, Clement
Leger, Dinh Nguyen and Jarkko Nikula.
- Support for octal mode transfers in spidev.
- Slave mode support for the Rockchip drivers.
- Support for AMD controllers, Broadcom mspi and Raspberry Pi 4, and
Intel Elkhart Lake"
* tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (125 commits)
spi: spi-fsl-dspi: fix native data copy
spi: Convert DW SPI binding to DT schema
spi: dw: Refactor mid_spi_dma_setup() to separate DMA and IRQ config
spi: dw: Make DMA request line assignments explicit for Intel Medfield
spi: bcm2835: Remove shared interrupt support
dt-bindings: snps,dw-apb-ssi: add optional reset property
spi: dw: add reset control
spi: bcm2835: Enable shared interrupt support
spi: bcm2835: Implement shutdown callback
spi: dw: Use regset32 DebugFS method to create regdump file
spi: dw: Add DMA support to the DW SPI MMIO driver
spi: dw: Cleanup generic DW DMA code namings
spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
spi: dw: Add core suffix to the DW APB SSI core source file
spi: dw: Fix Rx-only DMA transfers
spi: dw: Use DMA max burst to set the request thresholds
spi: dw: Parameterize the DMA Rx/Tx burst length
spi: dw: Add SPI Rx-done wait method to DMA-based transfer
...
vmx_tsc_adjust_test fails with:
IA32_TSC_ADJUST is -4294969448 (-1 * TSC_ADJUST_VALUE + -2152).
IA32_TSC_ADJUST is -4294969448 (-1 * TSC_ADJUST_VALUE + -2152).
IA32_TSC_ADJUST is 281470681738540 (65534 * TSC_ADJUST_VALUE + 4294962476).
==== Test Assertion Failure ====
x86_64/vmx_tsc_adjust_test.c:153: false
pid=19738 tid=19738 - Interrupted system call
1 0x0000000000401192: main at vmx_tsc_adjust_test.c:153
2 0x00007fe1ef8583d4: ?? ??:0
3 0x0000000000401201: _start at ??:?
Failed guest assert: (adjust <= max)
The problem is that is 'tsc_val' should be u64, not u32 or the reading
gets truncated.
Fixes: 8d7fbf01f9 ("KVM: selftests: VMX preemption timer migration test")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200601154726.261868-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is currently working due to extra include paths in the build.
Before:
$ cd tools/perf/arch/arm64/util
$ ls -la ../../util/unwind-libdw.h
ls: cannot access '../../util/unwind-libdw.h': No such file or directory
After:
$ ls -la ../../../util/unwind-libdw.h
-rw-r----- 1 irogers irogers 553 Apr 17 14:31 ../../../util/unwind-libdw.h
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200529225232.207532-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is to add four options to synthesize events which are
described as below:
'f': synthesize first level cache events
'm': synthesize last level cache events
't': synthesize TLB events
'a': synthesize remote access events
This four options will be used by ARM SPE as their first consumer.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Tested-by: James Clark <james.clark@arm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200530122442.490-3-leo.yan@linaro.org
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create a new arm-spe-decoder directory for subsequent extensions and
move arm-spe-pkt-decoder.h/c to this directory. No code changes.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Tested-by: James Clark <james.clark@arm.com>
Tested-by: Qi Liu <liuqi115@hisilicon.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200530122442.490-2-leo.yan@linaro.org
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid a false positive caused by assembly code in arch/x86.
In tests, zero the perf_event to avoid uninitialized memory uses.
Warnings were caught using clang with -fsanitize=memory.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200530082015.39162-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tail call optimization can unexpectedly make the stack smaller and
cause the test to fail.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: clang-built-linux@googlegroups.com
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200530082015.39162-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tail call optimizations can remove stack frames that are used in
unwinding tests. Add an attribute that can be used to disable the tail
call optimization. Tested on clang and GCC.
Committer notes:
Old versions of clang don't like that __attribute__((optimize)), so add
an ifdef to make it go away.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: clang-built-linux@googlegroups.com
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200530082015.39162-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before supporting additional relocation types rename the relevant
types and functions from "rela" to "reloc". This work be done with
the following regex:
sed -e 's/struct rela/struct reloc/g' \
-e 's/\([_\*]\)rela\(s\{0,1\}\)/\1reloc\2/g' \
-e 's/tmprela\(s\{0,1\}\)/tmpreloc\1/g' \
-e 's/relasec/relocsec/g' \
-e 's/rela_list/reloc_list/g' \
-e 's/rela_hash/reloc_hash/g' \
-e 's/add_rela/add_reloc/g' \
-e 's/rela->/reloc->/g' \
-e '/rela[,\.]/{ s/\([^\.>]\)rela\([\.,]\)/\1reloc\2/g ; }' \
-e 's/rela =/reloc =/g' \
-e 's/relas =/relocs =/g' \
-e 's/relas\[/relocs[/g' \
-e 's/relaname =/relocname =/g' \
-e 's/= rela\;/= reloc\;/g' \
-e 's/= relas\;/= relocs\;/g' \
-e 's/= relaname\;/= relocname\;/g' \
-e 's/, rela)/, reloc)/g' \
-e 's/\([ @]\)rela\([ "]\)/\1reloc\2/g' \
-e 's/ rela$/ reloc/g' \
-e 's/, relaname/, relocname/g' \
-e 's/sec->rela/sec->reloc/g' \
-e 's/(\(!\{0,1\}\)rela/(\1reloc/g' \
-i \
arch.h \
arch/x86/decode.c \
check.c \
check.h \
elf.c \
elf.h \
orc_gen.c \
special.c
Notable exceptions which complicate the regex include gelf_*
library calls and standard/expected section names which still use
"rela" because they encode the type of relocation expected. Also, keep
"rela" in the struct because it encodes a specific type of relocation
we currently expect.
It will eventually turn into a member of an anonymous union when a
susequent patch adds implicit addend, or "rel", relocation support.
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
With synthetic events now a separate config item as a result of
'tracing: Move synthetic events to a separate file', tests that use
both need to explicitly check for hist trigger support rather than
relying on hist triggers to pull in synthetic events.
Add an additional hist trigger check to all the trigger tests that now
require it, otherwise they'll fail if synthetic events but not hist
triggers are enabled.
Link: http://lkml.kernel.org/r/af36c539006ef2768114b4ed38e6b054f7c7a3bd.1590693308.git.zanussi@kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Update tests to reflect new CPUID capabilities with SYNDBG.
Check that we get the right number of entries and that
0x40000000.EAX always returns the correct max leaf.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200529134543.1127440-7-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a nested VM with a VMX-preemption timer is migrated, verify that the
nested VM and its parent VM observe the VMX-preemption timer exit close to
the original expiration deadline.
Signed-off-by: Makarand Sonare <makarandsonare@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200526215107.205814-3-makarandsonare@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_CAP_NESTED_STATE is now supported for AMD too but smm test acts like
it is still Intel only.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200529130407.57176-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The test is similar to the existing one for VMX, but simpler because we
don't have to test shadow VMCS or vmptrld/vmptrst/vmclear.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Many tests will want to check if the CPU is Intel or AMD in
guest code, add cpu_has_svm() and put it as static
inline to svm_util.h.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200529130407.57176-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
- Prevent a memory leak in ioperm which was caused by the stupid
assumption that the exit cleanup is always called for current, which is
not the case when fork fails after taking a reference on the ioperm
bitmap.
- Fix an arithmething overflow in the DMA code on 32bit systems
- Fill gaps in the xstate copy with defaults instead of leaving them
uninitialized
- Revert: o"Make __X32_SYSCALL_BIT be unsigned long" as it turned out
that existing user space fails to build.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl7Tt8YTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYobtTEACukhGsuivgiTwltWuHcATqrcNbgHSu
nnhuQrjJ8KJiF5O60nDztPAVzxD+Ww2tzuDnD1BLFDI9cEA5oPhzXf7kUuJvrYUK
INY+OALPPpw2iWjmygIsEyw3Pzmnm6peRA4h5UZSZdFxdROGGwBeGYNxowuVWFiH
X7Fa1J4QxTI7e2X3psDVz94bOnVTPRPAR2bNpX8K8Qs+Wn1FFO92LFU04EvJTCHe
JdN73VAS+0o0qPlPMewiuyfxaHexc8eJySMdOiysPnGRy+vagyyMPOV2Kg0DD6bp
caDxCXNjIxXlRExV6F75s8hnl42DwXzLSzY/G7L/HVJ5r3voqcREYtXHgfenl7Jg
8o6tEi+qFduPJ6SuRjfjPBDBF4wJvcjgmCwJaPJbMkrg8p5jH9Xg35egmEMo9cF8
JQa2RzWJTR9XUjuPAuHJZR6f9jnle01PCznmw7Mavoed82udW1Lo32+QnvWsx6Qq
4uuV38FqK3lsVCfFjyZir9OB9DGeuT/NETs3WJuGW5QUnC1mqfvIYipL3BkxNMKP
IBB7n5X2iCJ545JkydepXF2I+b/i8XhNcIwYMVoSbZzBKccwCZ7zxHFNj6YAWG+M
TN77x/+lw5zbnxhL3YzK+fgPNLio/By4Zcpmq6uppaf9Ip67SJGVq22Ef3S0w8vG
X1inh1zqLX9hsQ==
=DmSb
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A pile of x86 fixes:
- Prevent a memory leak in ioperm which was caused by the stupid
assumption that the exit cleanup is always called for current,
which is not the case when fork fails after taking a reference on
the ioperm bitmap.
- Fix an arithmething overflow in the DMA code on 32bit systems
- Fill gaps in the xstate copy with defaults instead of leaving them
uninitialized
- Revert: "Make __X32_SYSCALL_BIT be unsigned long" as it turned out
that existing user space fails to build"
* tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioperm: Prevent a memory leak when fork fails
x86/dma: Fix max PFN arithmetic overflow on 32 bit systems
copy_xstate_to_kernel(): don't leave parts of destination uninitialized
x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long"
A missing stats_update callback was recently added to act_pedit. Now that
iproute2 supports JSON dumping for pedit, extend the pedit_dsfield selftest
with a check that would have caught the fact that the callback was missing.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using ping in tests is error-prone, because ping is too smart. On a
flaky system (notably in a simulator), when packets don't come quickly
enough, more pings are sent, and that throws off counters. Instead use
mausezahn to generate ICMP echo request packets. That allows us to
send them in quicker succession as well, because the reason the ping
was made slow in the first place was to make the tests work on
simulated systems.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-05-29
The following pull-request contains BPF updates for your *net* tree.
We've added 6 non-merge commits during the last 7 day(s) which contain
a total of 4 files changed, 55 insertions(+), 34 deletions(-).
The main changes are:
1) minor verifier fix for fmod_ret progs, from Alexei.
2) af_xdp overflow check, from Bjorn.
3) minor verifier fix for 32bit assignment, from John.
4) powerpc has non-overlapping addr space, from Petr.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Added a verifier test for assigning 32bit reg states to
64bit where 32bit reg holds a constant value of 0.
Without previous kernel verifier.c fix, the test in
this patch will fail.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/159077335867.6014.2075350327073125374.stgit@john-Precision-5820-Tower
After previous fix for zero extension test_verifier tests #65 and #66 now
fail. Before the fix we can see the alu32 mov op at insn 10
10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
R1_w=invP(id=0,
smin_value=4294967168,smax_value=4294967423,
umin_value=4294967168,umax_value=4294967423,
var_off=(0x0; 0x1ffffffff),
s32_min_value=-2147483648,s32_max_value=2147483647,
u32_min_value=0,u32_max_value=-1)
R10=fp0 fp-8_w=mmmmmmmm
10: (bc) w1 = w1
11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
R1_w=invP(id=0,
smin_value=0,smax_value=2147483647,
umin_value=0,umax_value=4294967295,
var_off=(0x0; 0xffffffff),
s32_min_value=-2147483648,s32_max_value=2147483647,
u32_min_value=0,u32_max_value=-1)
R10=fp0 fp-8_w=mmmmmmmm
After the fix at insn 10 because we have 's32_min_value < 0' the following
step 11 now has 'smax_value=U32_MAX' where before we pulled the s32_max_value
bound into the smax_value as seen above in 11 with smax_value=2147483647.
10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
R1_w=inv(id=0,
smin_value=4294967168,smax_value=4294967423,
umin_value=4294967168,umax_value=4294967423,
var_off=(0x0; 0x1ffffffff),
s32_min_value=-2147483648, s32_max_value=2147483647,
u32_min_value=0,u32_max_value=-1)
R10=fp0 fp-8_w=mmmmmmmm
10: (bc) w1 = w1
11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
R1_w=inv(id=0,
smin_value=0,smax_value=4294967295,
umin_value=0,umax_value=4294967295,
var_off=(0x0; 0xffffffff),
s32_min_value=-2147483648, s32_max_value=2147483647,
u32_min_value=0, u32_max_value=-1)
R10=fp0 fp-8_w=mmmmmmmm
The fall out of this is by the time we get to the failing instruction at
step 14 where previously we had the following:
14: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
R1_w=inv(id=0,
smin_value=72057594021150720,smax_value=72057594029539328,
umin_value=72057594021150720,umax_value=72057594029539328,
var_off=(0xffffffff000000; 0xffffff),
s32_min_value=-16777216,s32_max_value=-1,
u32_min_value=-16777216,u32_max_value=-1)
R10=fp0 fp-8_w=mmmmmmmm
14: (0f) r0 += r1
We now have,
14: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
R1_w=inv(id=0,
smin_value=0,smax_value=72057594037927935,
umin_value=0,umax_value=72057594037927935,
var_off=(0x0; 0xffffffffffffff),
s32_min_value=-2147483648,s32_max_value=2147483647,
u32_min_value=0,u32_max_value=-1)
R10=fp0 fp-8_w=mmmmmmmm
14: (0f) r0 += r1
In the original step 14 'smin_value=72057594021150720' this trips the logic
in the verifier function check_reg_sane_offset(),
if (smin >= BPF_MAX_VAR_OFF || smin <= -BPF_MAX_VAR_OFF) {
verbose(env, "value %lld makes %s pointer be out of bounds\n",
smin, reg_type_str[type]);
return false;
}
Specifically, the 'smin <= -BPF_MAX_VAR_OFF' check. But with the fix
at step 14 we have bounds 'smin_value=0' so the above check is not tripped
because BPF_MAX_VAR_OFF=1<<29.
We have a smin_value=0 here because at step 10 the smaller smin_value=0 means
the subtractions at steps 11 and 12 bring the smin_value negative.
11: (17) r1 -= 2147483584
12: (17) r1 -= 2147483584
13: (77) r1 >>= 8
Then the shift clears the top bit and smin_value is set to 0. Note we still
have the smax_value in the fixed code so any reads will fail. An alternative
would be to have reg_sane_check() do both smin and smax value tests.
To fix the test we can omit the 'r1 >>=8' at line 13. This will change the
err string, but keeps the intention of the test as suggseted by the title,
"check after truncation of boundary-crossing range". If the verifier logic
changes a different value is likely to be thrown in the error or the error
will no longer be thrown forcing this test to be examined. With this change
we see the new state at step 13.
13: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
R1_w=invP(id=0,
smin_value=-4294967168,smax_value=127,
umin_value=0,umax_value=18446744073709551615,
s32_min_value=-2147483648,s32_max_value=2147483647,
u32_min_value=0,u32_max_value=-1)
R10=fp0 fp-8_w=mmmmmmmm
Giving the expected out of bounds error, "value -4294967168 makes map_value
pointer be out of bounds" However, for unpriv case we see a different error
now because of the mixed signed bounds pointer arithmatic. This seems OK so
I've only added the unpriv_errstr for this. Another optino may have been to
do addition on r1 instead of subtraction but I favor the approach above
slightly.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/159077333942.6014.14004320043595756079.stgit@john-Precision-5820-Tower
So that when one runs:
$ make -C tools/perf build-test
We make sure that recent changes don't break that opt-in build.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonghong Song <yhs@fb.com>
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch links perf with the libpfm4 library if it is available and
LIBPFM4 is passed to the build. The libpfm4 library contains hardware
event tables for all processors supported by perf_events. It is a helper
library that helps convert from a symbolic event name to the event
encoding required by the underlying kernel interface. This library is
open-source and available from: http://perfmon2.sf.net.
With this patch, it is possible to specify full hardware events by name.
Hardware filters are also supported. Events must be specified via the
--pfm-events and not -e option. Both options are active at the same time
and it is possible to mix and match:
$ perf stat --pfm-events inst_retired:any_p:c=1:i -e cycles ....
One needs to explicitely ask for its inclusion by using the LIBPFM4 make
command line option, ie its opt-in rather than opt-out of feature
detection and build support.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: http://lore.kernel.org/lkml/20200505182943.218248-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This header is part of the jsmn JSON parser, introduced in 867a979a83.
Correct the SPDX tag to indicate that it is under the MIT license.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: http://lore.kernel.org/lkml/20200528170858.48457-1-emaste@freefall.freebsd.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix an issue where addresses in the DWARF line table are offset by -0x40
(GEN_ELF_TEXT_OFFSET). This can be seen with `objdump -S` on the ELF
files after perf inject.
Committer notes:
Ian added this in his Acked-by reply:
---
Without too much knowledge this looks good to me. The original code came
from oprofile's jit support:
https://sourceforge.net/p/oprofile/oprofile/ci/master/tree/opjitconv/debug_line.c#l325
---
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200528051916.6722-1-nick.gasson@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For each PC/BCI pair in the JVMTI compiler inlining record table, the
jitdump plugin emits debug line table entries for every source line in
the method preceding that BCI. Instead only emit one source line per
PC/BCI pair. Reported by Ian Rogers. This reduces the .dump size for
SPECjbb from ~230MB to ~40MB.
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200528054049.13662-1-nick.gasson@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We forgot to add it, so one would have to explicitely ask for it to be
run, fix that by adding it to the set of tests that are performed by
default when one does:
$ make -C tools/perf build-test
It was being exercised only in the make_minimal test, this patch makes
it be tested in isolation, i.e. disabling only this feature.
Fixes: e26e63be64 ("perf build: Add sdt feature detection")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We forgot to add it, so one would have to explicitely ask for it to be
run, fix that by adding it to the set of tests that are performed by
default when one does:
$ make -C tools/perf build-test
It was being exercised only in the make_minimal test, this patch makes
it be tested in isolation, i.e. disabling only this feature.
Fixes: 8ee4646038 ("perf build: Add libcrypto feature detection")
Cc: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we make sure that even on x86-64 and other architectures where
that is the default method we test build the fallback to libaudit that
other architectures use.
I.e. now this line got added to:
$ make -C tools/perf build-test
<SNIP>
make_no_syscall_tbl_O: cd . && make NO_SYSCALL_TABLE=1 FEATURES_DUMP=/home/acme/git/perf/tools/perf/BUILD_TEST_FEATURE_DUMP -j12 O=/tmp/tmp.W0HtKR1mfr DESTDIR=/tmp/tmp.lNezgCVPzW
<SNIP>
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo reported that the libaudit was always appearing as OFF:
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ OFF ]
And everything seemed to work, i.e. we were checking for a feature that
we don't use, causing confusion for people building perf, so work to
remove that nuisance while making sure that it works when an arch
doesn't provide the alternative method to generate the syscall id/name
conversion tables.
Longer explanation of the new modus operandi:
$ make -C tools/perf O=/tmp/build/perf NO_SYSCALL_TABLE=1
<SNIP>
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
Makefile.config:665: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev
GEN /tmp/build/perf/common-cmds.h
MKDIR /tmp/build/perf/fd/
MKDIR /tmp/build/perf/fs/
<SNIP>
$
The libaudit test is forced and it fails when audit-libs-devel isn't available:
$ cat /tmp/build/perf/feature/test-libaudit.make.output
test-libaudit.c:2:10: fatal error: libaudit.h: No such file or directory
2 | #include <libaudit.h>
| ^~~~~~~~~~~~
compilation terminated.
$
If we install audit-libs-devel and rebuild it continues not to be shown as OFF
in the main auto-detection summary, but again gets tested and this time:
$ rpm -q audit-libs-devel
audit-libs-devel-3.0-0.15.20191104git1c2f876.fc31.x86_64
$
The make output for the feature detection comes clean:
$ cat /tmp/build/perf/feature/test-libaudit.make.output
And the feature detection binary is successfully built and is dynamicly linked
with libaudit:
$ ldd /tmp/build/perf/feature/test-libaudit.bin | grep audit
libaudit.so.1 => /lib64/libaudit.so.1 (0x00007f5bf5177000)
$
As well as the resulting perf binary:
$ ldd /tmp/build/perf/perf | grep audit
libaudit.so.1 => /lib64/libaudit.so.1 (0x00007fad511c7000)
$
And 'perf trace' works using the libaudit method:
$ sudo /tmp/build/perf/perf trace -e nanosleep sleep 1
0.000 (1000.067 ms): sleep/281872 nanosleep(rqtp: 0x7ffedbbe69d0) = 0
$
If we leave audit-libs-devel installed but don't disable the use of the best
method, the one using SYSCALL_TABLE, the default for architectures that provide
the script to build the syscall id/name mapping using the .tbl files copied
from the kernel sources, we get:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ make -C tools/perf O=/tmp/build/perf
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
GEN /tmp/build/perf/common-cmds.h
<SNIP>
$
Again, no mention of libaudit being on or OFF and:
$ cat /tmp/build/perf/feature/test-libaudit.make.output
cat: /tmp/build/perf/feature/test-libaudit.make.output: No such file or directory
$
We didn't even bother checking for its availability, slightly speeding up the
build process and:
$ ldd /tmp/build/perf/perf | grep libaudit
$
We don't link with it, also:
$ sudo /tmp/build/perf/perf trace -e nanosleep sleep 1
0.000 (1000.053 ms): sleep/299125 nanosleep(rqtp: 0x7ffc24611b50) = 0
$
And globs become available:
$ sudo /tmp/build/perf/perf trace -e *sleep sleep 1
0.000 (1000.072 ms): sleep/299136 nanosleep(rqtp: 0x7ffe7a3c4ff0) = 0
$
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The audit-libs API doesn't provide a way to figure out what is the
syscall with the greatest number/id, take that into account when using
that method to go on growing the syscall table as we the syscalls go on
appearing on the radar.
With this the libaudit based method is back working, i.e. when building
with:
$ make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin
<SNIP>
Auto-detecting system features:
<SNIP>
... libaudit: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
<SNIP>
$ ldd ~/bin/perf | grep audit
libaudit.so.1 => /lib64/libaudit.so.1 (0x00007faef22df000)
$
perf trace is back working, which makes it functional in arches other
than x86_64, powerpc, arm64 and s390, that provides these generators:
$ find tools/perf/arch/ -name "*syscalltbl*"
tools/perf/arch/x86/entry/syscalls/syscalltbl.sh
tools/perf/arch/arm64/entry/syscalls/mksyscalltbl
tools/perf/arch/s390/entry/syscalls/mksyscalltbl
tools/perf/arch/powerpc/entry/syscalls/mksyscalltbl
$
Example output forcing the libaudit method on x86_64:
# perf trace -e file,nanosleep sleep 0.001
? ( ): sleep/859090 ... [continued]: execve()) = 0
0.045 ( 0.005 ms): sleep/859090 access(filename: 0x8733e850, mode: R) = -1 ENOENT (No such file or directory)
0.055 ( 0.005 ms): sleep/859090 openat(dfd: CWD, filename: 0x8733ba29, flags: RDONLY|CLOEXEC) = 3
0.079 ( 0.005 ms): sleep/859090 openat(dfd: CWD, filename: 0x87345d20, flags: RDONLY|CLOEXEC) = 3
0.085 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483f58, count: 832) = 832
0.090 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483b50, count: 784) = 784
0.094 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483b20, count: 32) = 32
0.098 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483ad0, count: 68) = 68
0.109 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483a50, count: 784) = 784
0.113 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483730, count: 32) = 32
0.117 ( 0.002 ms): sleep/859090 read(fd: 3, buf: 0x7ffd9d483710, count: 68) = 68
0.320 ( 0.008 ms): sleep/859090 openat(dfd: CWD, filename: 0x872c3660, flags: RDONLY|CLOEXEC) = 3
0.372 ( 1.057 ms): sleep/859090 nanosleep(rqtp: 0x7ffd9d484ac0) = 0
#
There are still some limitations when using the libaudit method, that
will be fixed at some point, i.e., this works with the mksyscalltbl
method but not with libaudit's:
# perf trace -e file,*sleep sleep 0.001
event syntax error: '*sleep'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the past this wasn't needed as the libaudit based code would use just
one field, and the alternative constructor would fill in all the fields,
but now that even when using the libaudit based method we need the other
fields, switch to zalloc() to make sure the other fields are zeroed at
instantiation time.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we moved to a syscalltbl generated from the kernel syscall tables
(arch/..../syscall*.tbl) the idea was to either use it, when having the
generator (e.g. tools/perf/arch/x86/entry/syscalls/syscalltbl.sh), or
falling back to the previous audit-libs based way of mapping syscall ids
to strings and the other way around.
At first we just needed the audit_detect_machine() return to then use it
to the str->id/id->str, or the other fields for the now used by default
in the most well developed arches method of using the syscall table
generator.
The problem is that then the libaudit code fell into disrepair, and
architectures where it is the method used are not working.
Now, with NO_SYSCALL_TABLE=1 being possible to pass on the make command
line we can automate the testing of that method even on x86-64, arm64,
etc.
And doing it I noted that we actually use fields in both entries in the
union, oops, so ditch the union, as we need all those fields at the same
time.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is useful to see if, on x86, the legacy libaudit still works, as it
is used in architectures that don't have the SYSCALL_TABLE logic and we
want to have it tested in 'make -C tools/perf/ build-test'.
E.g.:
Without having audit-libs-devel installed:
$ make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
<SNIP>
Auto-detecting system features:
<SNIP>
... libaudit: [ OFF ]
... libbfd: [ on ]
... libcap: [ on ]
<SNIP>
Makefile.config:664: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev
<SNIP>
After installing it:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ time make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin ; perf test python
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h'
diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h
Warning: Kernel ABI header at 'tools/perf/util/hashmap.c' differs from latest version at 'tools/lib/bpf/hashmap.c'
diff -u tools/perf/util/hashmap.c tools/lib/bpf/hashmap.c
Auto-detecting system features:
<SNIP>
... libaudit: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
<SNIP>
$ ldd ~/bin/perf | grep audit
libaudit.so.1 => /lib64/libaudit.so.1 (0x00007fc18978e000)
$
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200529155552.463-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help in allowing to disable it from the make command line.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200529155552.463-2-acme@kernel.org
[ Fixed the logic for the filter part, it should be ifeq, not ifneq ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add Nik's torture tests as a new set to stress the replace and cleanup
paths.
Torture test created by Nikolay Aleksandrov and then I adapted to
selftest and added IPv6 version.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check whether error_log file exists in tracing/error_log testcase
and return UNSUPPORTED if no error_log file.
This can happen if we run the ftracetest on the older stable
kernel.
Fixes: 4eab1cc461 ("selftests/ftrace: Add tracing/error_log testcase")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since the built-in echo has different behavior in POSIX shell
(dash) and bash, kprobe_syntax_errors.tc can fail on dash which
interpret backslash escape automatically.
To fix this issue, we explicitly use printf "%s" (not interpret
backslash escapes) if the command string can include backslash.
Reported-by: Liu Yiding <yidingx.liu@intel.com>
Suggested-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
ELF doesn't require .rela section names to match the base section. Use
the section index in sh_info to find the section instead of looking it
up by name.
LLD, for example, generates a .rela section that doesn't match the base
section name when we merge sections in a linker script for a binary
compiled with -ffunction-sections.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
If a .cold function is examined prior to it's parent, the link
to the parent/child function can be overwritten when the parent
is examined. Only update pfunc and cfunc if they were previously
nil to prevent this from happening.
This fixes an issue seen when compiling with -ffunction-sections.
Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Stop the message displaying when user space is not being traced.
Example:
Prerequisites:
sudo setcap "cap_sys_rawio,cap_sys_admin,cap_sys_ptrace,cap_syslog,cap_ipc_lock=ep" ~/bin/perf
sudo chmod +r /proc/kcore
Before:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
Warning:
Intel Processor Trace decoding will not be possible except for kernel tracing!
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.838 MB perf.data ]
After:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.068 MB perf.data ]
$ sudo chmod go-r /proc/kcore
$ sudo setcap -r ~/bin/perf
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lore.kernel.org/lkml/20200528120859.21604-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Context switch events are added automatically by Intel PT and Coresight.
Make it possible to suppress them. That is useful for tracing the
scheduler without the disturbance that the switch event processing
creates.
Example:
Prerequisites:
$ which perf
~/bin/perf
$ sudo setcap "cap_sys_rawio,cap_sys_admin,cap_sys_ptrace,cap_syslog,cap_ipc_lock=ep" ~/bin/perf
$ sudo chmod +r /proc/kcore
Before:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.938 MB perf.data ]
$ perf script -D | grep PERF_RECORD_SWITCH | wc -l
572
After:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
Warning:
Intel Processor Trace decoding will not be possible except for kernel tracing!
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.838 MB perf.data ]
$ perf script -D | grep PERF_RECORD_SWITCH | wc -l
0
$ sudo chmod go-r /proc/kcore
$ sudo setcap -r ~/bin/perf
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lore.kernel.org/lkml/20200528120859.21604-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events marked as 'immediate' are started before other events to ensure
that there is context at the start of the main tracing events. The same
is true at the end of tracing, so disable 'immediate' events after other
events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20200512121922.8997-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the absence of any modules, no "modules" map is created, but there
are other executable pages to map, due to eBPF JIT, kprobe or ftrace.
Map them by recognizing that the first "module" symbol is not
necessarily from a module, and adjust the map accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20200512121922.8997-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For a Java method signature like:
Ljava/lang/AbstractStringBuilder;appendChars(Ljava/lang/String;II)V
The demangler produces:
void class java.lang.AbstractStringBuilder.appendChars(class java.lang., shorttring., int, int)
The arguments should be (java.lang.String, int, int) but the demangler
interprets the "S" in String as the type code for "short". Correct this
and two other minor things:
- There is no "bool" type in Java, should be "boolean".
- The demangler prepends "class" to every Java class name. This is not
standard Java syntax and it wastes a lot of horizontal space if the
signature is long. Remove this as there isn't any ambiguity between
class names and primitives.
Committer notes:
This was split from a larger patch that also added a java demangler
'perf test' entry, that, before this patch shows the error being fixed
by it:
$ perf test java
65: Demangle Java : FAILED!
$ perf test -v java
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
65: Demangle Java :
--- start ---
test child forked, pid 307264
FAILED: Ljava/lang/StringLatin1;equals([B[B)Z: bool class java.lang.StringLatin1.equals(byte[], byte[]) != boolean java.lang.StringLatin1.equals(byte[], byte[])
FAILED: Ljava/util/zip/ZipUtils;CENSIZ([BI)J: long class java.util.zip.ZipUtils.CENSIZ(byte[], int) != long java.util.zip.ZipUtils.CENSIZ(byte[], int)
FAILED: Ljava/util/regex/Pattern$BmpCharProperty;match(Ljava/util/regex/Matcher;ILjava/lang/CharSequence;)Z: bool class java.util.regex.Pattern$BmpCharProperty.match(class java.util.regex.Matcher., int, class java.lang., charhar, shortequence) != boolean java.util.regex.Pattern$BmpCharProperty.match(java.util.regex.Matcher, int, java.lang.CharSequence)
FAILED: Ljava/lang/AbstractStringBuilder;appendChars(Ljava/lang/String;II)V: void class java.lang.AbstractStringBuilder.appendChars(class java.lang., shorttring., int, int) != void java.lang.AbstractStringBuilder.appendChars(java.lang.String, int, int)
FAILED: Ljava/lang/Object;<init>()V: void class java.lang.Object<init>() != void java.lang.Object<init>()
test child finished with -1
---- end ----
Demangle Java: FAILED!
$
After applying this patch:
$ perf test java
65: Demangle Java : Ok
$
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200427061520.24905-4-nick.gasson@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Split from a larger patch that was also fixing a problem with the java
demangler, so, before applying that patch we see:
$ perf test java
65: Demangle Java : FAILED!
$ perf test -v java
65: Demangle Java :
--- start ---
test child forked, pid 307264
FAILED: Ljava/lang/StringLatin1;equals([B[B)Z: bool class java.lang.StringLatin1.equals(byte[], byte[]) != boolean java.lang.StringLatin1.equals(byte[], byte[])
FAILED: Ljava/util/zip/ZipUtils;CENSIZ([BI)J: long class java.util.zip.ZipUtils.CENSIZ(byte[], int) != long java.util.zip.ZipUtils.CENSIZ(byte[], int)
FAILED: Ljava/util/regex/Pattern$BmpCharProperty;match(Ljava/util/regex/Matcher;ILjava/lang/CharSequence;)Z: bool class java.util.regex.Pattern$BmpCharProperty.match(class java.util.regex.Matcher., int, class java.lang., charhar, shortequence) != boolean java.util.regex.Pattern$BmpCharProperty.match(java.util.regex.Matcher, int, java.lang.CharSequence)
FAILED: Ljava/lang/AbstractStringBuilder;appendChars(Ljava/lang/String;II)V: void class java.lang.AbstractStringBuilder.appendChars(class java.lang., shorttring., int, int) != void java.lang.AbstractStringBuilder.appendChars(java.lang.String, int, int)
FAILED: Ljava/lang/Object;<init>()V: void class java.lang.Object<init>() != void java.lang.Object<init>()
test child finished with -1
---- end ----
Demangle Java: FAILED!
$
Next patch should fix this.
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200427061520.24905-4-nick.gasson@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the Java sources are compiled with -g:none to disable debug
information the perf JVMTI plugin reports a lot of errors like:
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
java: GetLineNumberTable failed with JVMTI_ERROR_ABSENT_INFORMATION
Instead if GetLineNumberTable returns JVMTI_ERROR_ABSENT_INFORMATION
simply skip emitting line number information for that method. Unlike the
previous patch these errors don't affect the jitdump generation, they
just generate a lot of noise.
Similarly for native methods which also don't have line tables.
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200427061520.24905-3-nick.gasson@arm.com
[ Moved || operator to the end of the line, not at the start of 2nd if condition ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a Java class is compiled with -g:none to omit debug information, the
JVMTI plugin won't write jitdump entries for any method in this class
and prints a lot of errors like:
java: GetSourceFileName failed with JVMTI_ERROR_ABSENT_INFORMATION
The call to GetSourceFileName is used to derive the file name `fn`, but
this value is not actually used since commit ca58d7e64b ("perf jvmti:
Generate correct debug information for inlined code") which moved the
file name lookup into fill_source_filenames(). So the call to
GetSourceFileName and related code can be safely removed.
Signed-off-by: Nick Gasson <nick.gasson@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200427061520.24905-2-nick.gasson@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to pass more data to the scanner so let's start with having it
to take pointer to 'struct parse_events_state' object instead of just
start token.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200524224219.234847-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to pass the given evsel's count to metric data, because
it will be pushed again within the following metric_events loop.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200524224219.234847-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
Usage: perf list [<options>] [hw|sw|cache|tracepoint|pmu|sdt|event_glob]
After:
Usage: perf list [<options>] [hw|sw|cache|tracepoint|pmu|sdt|metric|metricgroup|event_glob]
Committer testing:
Before and after we get these outputs on a Lenovo t480s (i7-8650U):
# perf list metricgroup
List of pre-defined events (to be used in -e):
Metric Groups:
BrMispredicts
BrMispredicts_SMT
Branches
Cache_Misses
DSB
FLOPS
FLOPS_SMT
Fetch_BW
IcMiss
Instruction_Type
Memory_BW
Memory_Bound
Memory_Lat
No_group
PGO
Pipeline
Power
Retire
SMT
Summary
TLB
TLB_SMT
TopDownL1
TopDownL1_SMT
TopdownL1
TopdownL1_SMT
#
# perf list metric | head -11
Metrics:
Backend_Bound
[This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend]
Backend_Bound_SMT
[This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU]
Bad_Speculation
[This category represents fraction of slots wasted due to incorrect speculations]
Bad_Speculation_SMT
[This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU]
#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200522064546.164259-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
--xed currently forces less. When piping the output to other scripts
this can waste a lot of CPU time because less is rather slow.
I've seen it using up a full core on its own in a pipeline.
Only force less when the output is actually a terminal.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20200522020914.527564-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove unnecessary commas from events before they are parsed. This
avoids ',' being echoed by parse-events.l.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --metric-no-group that causes all events within metrics to not be
grouped. This can allow the event to get more time when multiplexed, but
may also lower accuracy.
Add --metric-no-merge option. By default events in different metrics may
be shared if the group of events for one metric is the same or larger
than that of the second. Sharing may increase or lower accuracy and so
is now configurable.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A metric group contains multiple metrics. These metrics may use the same
events. If metrics use separate events then it leads to more
multiplexing and overall metric counts fail to sum to 100%.
Modify how metrics are associated with events so that if the events in
an earlier group satisfy the current metric, the same events are used.
A record of used events is kept and at the end of processing unnecessary
events are eliminated.
Before:
$ perf stat -a -M TopDownL1 sleep 1
Performance counter stats for 'system wide':
920,211,343 uops_issued.any # 0.5 Backend_Bound (16.56%)
1,977,733,128 idq_uops_not_delivered.core (16.56%)
51,668,510 int_misc.recovery_cycles (16.56%)
732,305,692 uops_retired.retire_slots (16.56%)
1,497,621,849 cycles (16.56%)
721,098,274 uops_issued.any # 0.1 Bad_Speculation (16.79%)
1,332,681,791 cycles (16.79%)
552,475,482 uops_retired.retire_slots (16.79%)
47,708,340 int_misc.recovery_cycles (16.79%)
1,383,713,292 cycles
# 0.4 Frontend_Bound (16.76%)
2,013,757,701 idq_uops_not_delivered.core (16.76%)
1,373,363,790 cycles
# 0.1 Retiring (33.54%)
577,302,589 uops_retired.retire_slots (33.54%)
392,766,987 inst_retired.any # 0.3 IPC (50.24%)
1,351,873,350 cpu_clk_unhalted.thread (50.24%)
1,332,510,318 cycles
# 5330041272.0 SLOTS (49.90%)
1.006336145 seconds time elapsed
After:
$ perf stat -a -M TopDownL1 sleep 1
Performance counter stats for 'system wide':
765,949,145 uops_issued.any # 0.1 Bad_Speculation
# 0.5 Backend_Bound (50.09%)
1,883,830,591 idq_uops_not_delivered.core # 0.3 Frontend_Bound (50.09%)
48,237,080 int_misc.recovery_cycles (50.09%)
581,798,385 uops_retired.retire_slots # 0.1 Retiring (50.09%)
1,361,628,527 cycles
# 5446514108.0 SLOTS (50.09%)
391,415,714 inst_retired.any # 0.3 IPC (49.91%)
1,336,486,781 cpu_clk_unhalted.thread (49.91%)
1.005469298 seconds time elapsed
Note: Bad_Speculation + Backend_Bound + Frontend_Bound + Retiring = 100%
after, where as before it is 110%. After there are 2 groups, whereas
before there are 6. After the cycles event appears once, before it
appeared 5 times.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When adding event groups to the group list, insert them in size order.
This performs an insertion sort on the group list. By placing the
largest groups at the front of the group list it is possible to see if a
larger group contains the same events as a later group. This can make
the later group redundant - it can reuse the events from the large
group. A later patch will add this sharing.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently event groups are placed into groups_list at the same time as
the events string containing the events is built. Separate these two
operations and build the groups_list first, then the event string from
the groups_list. This adds an ability to reorder the groups_list that
will be used in a later patch.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use early return in metricgroup__add_metric and try to make the intent
of the returns more intention revealing.
Suggested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a metric contains the duration_time event then the event is placed
outside of the metric's group of events. Rather than split the group,
make it so the duration_time is immediately after the group.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520182011.32236-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fix potential segment fault triggered in
put_tracepoints_path() when the address of the local variable 'path' be
freed in error path of record_saved_cmdline.
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hongbo Yao <yaohongbo@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Link: http://lore.kernel.org/lkml/20200521133218.30150-5-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Need to free "str" before return when asprintf() failed to avoid memory
leak.
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hongbo Yao <yaohongbo@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200521133218.30150-4-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently there's no error message prompted if we failed to start
workload. And we still get some trace which is confusing. Let's tell
users what happened.
Committer testing:
Before:
# perf ftrace nonsense |& head
5) | switch_mm_irqs_off() {
5) 0.400 us | load_new_mm_cr3();
5) 3.261 us | }
------------------------------------------
5) <idle>-0 => <...>-3494
------------------------------------------
5) | finish_task_switch() {
5) ==========> |
5) | smp_irq_work_interrupt() {
# type nonsense
-bash: type: nonsense: not found
#
After:
# perf ftrace nonsense |& head
workload failed: No such file or directory
# type nonsense
-bash: type: nonsense: not found
#
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200510150628.16610-3-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This align ftrace to other perf sub-commands that if no target specified
then we trace all functions.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200510150628.16610-2-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array
member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by this
change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle and audited _manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200520191613.GA26869@embeddedor
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for new "stat.big-num" boolean option.
This allows a user to set a default for "--no-big-num" for "perf stat"
commands.
--
$ perf config stat.big-num
$ perf stat --event cycles /bin/true
Performance counter stats for '/bin/true':
778,849 cycles
[...]
$ perf config stat.big-num=false
$ perf config stat.big-num
stat.big-num=false
$ perf stat --event cycles /bin/true
Performance counter stats for '/bin/true':
769622 cycles
[...]
--
There is an interaction with "--field-separator" that must be
accommodated, such that specifying "--big-num --field-separator={x}"
still reports an invalid combination of options.
Documentation for perf-config and perf-stat updated.
Signed-off-by: Paul Clarke <pc@us.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lore.kernel.org/lkml/1589991815-17951-1-git-send-email-pc@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
key_scan_pos is a pointer for getting scan position in
bpf__obj_config_map() for each BPF map configuration term,
but it's misused when error not happened.
Committer notes:
The point is that the only user of this is:
tools/perf/util/parse-events.c
err = bpf__config_obj(obj, term, parse_state->evlist, &error_pos);
if (err) bpf__strerror_config_obj(obj, term, parse_state->evlist, &error_pos, err, errbuf, sizeof(errbuf));
And then:
int bpf__strerror_config_obj(struct bpf_object *obj __maybe_unused,
struct parse_events_term *term __maybe_unused,
struct evlist *evlist __maybe_unused,
int *error_pos __maybe_unused, int err,
char *buf, size_t size)
{
bpf__strerror_head(err, buf, size);
bpf__strerror_entry(BPF_LOADER_ERRNO__OBJCONF_MAP_TYPE,
"Can't use this config term with this map type");
bpf__strerror_end(buf, size);
return 0;
}
So this is infrastructure that Wang Nan put in place for providing
better error messages but that he ended up not using, so I'll apply the
fix, its correct even not fixing any real problem at this time.
Fixes: 066dacbf2a ("perf bpf: Add API to set values to map entries in a bpf object")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Cheng Jian <cj.chengjian@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520033216.48310-1-bobo.shaobowang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To collect the overall statistics for interval mode, we copy the counts
from evsel->prev_raw_counts to evsel->counts.
For AGGR_GLOBAL mode, because the perf_stat_process_counter creates aggr
values from per cpu values, but the per cpu values are 0, so the
calculated aggr values will be always 0.
This patch uses a trick that saves the previous aggr value to the first
member of perf_counts, then aggr calculation in process_counter_values
can work correctly for AGGR_GLOBAL.
v6:
---
Add comments in perf_evlist__save_aggr_prev_raw_counts.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200520042737.24160-5-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It would be useful to support the overall statistics for perf-stat
interval mode. For example, report the summary at the end of "perf-stat
-I" output.
But since perf-stat can support many aggregation modes, such as
--per-thread, --per-socket, -M and etc, we need a solution which doesn't
bring much complexity.
The idea is to use 'evsel->prev_raw_counts' which is updated in each
interval and it's saved with the latest counts. Before reporting the
summary, we copy the counts from evsel->prev_raw_counts to
evsel->counts, and next we just follow non-interval processing.
v5:
---
Don't save the previous aggr value to the member of [cpu0,thread0]
in perf_counts. Originally that was a trick because the
perf_stat_process_counter would create aggr values from per cpu
values. But we don't need to do that all the time. We will
handle it in next patch.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200520042737.24160-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we want to reset the evsel->prev_raw_counts, zeroing the aggr is
not enough, we need to reset the perf_counts too.
The perf_counts__reset zeros the perf_counts, and it should zero the
aggr too. This patch changes perf_counts__reset to non-static, and calls
it in evsel__reset_prev_raw_counts to reset the prev_raw_counts.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200520042737.24160-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Metrics like UNC_M_POWER_SELF_REFRESH encode 100 as "100." and
consequently the 100 is treated as a symbol. Alter the regular
expression to allow the dot to be before or after the number.
Note, this passed the pmu-events test as that tests the validity of a
number using strtod rather than lex code. strtod allows the dot after.
Add a test for this behavior.
Fixes: 26226a9772 (perf expr: Move expr lexer to flex)
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use a bitmap rather than an array of bools.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200520072814.128267-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian reported that we allow to parse following:
$ perf stat -e ,cycles true
which is wrong and we should fail, like we do with this fix:
$ perf stat -e ,cycles true
event syntax error: ',cycles'
\___ parser error
The reason is that we don't have rule for ',' in 'event' start condition
and it's matched and accepted by default rule.
Add scanner debug support (that Ian already added for expr code),
which was really useful for finding this. It's enabled together with
bison debug via 'make PARSER_DEBUG=1'.
Reported-by: Ian Rogers <irogers@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200520074050.156988-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Uses of "ICT" and "Ict" are expanded to "Instruction Completion Table".
Signed-off-by: Paul Clarke <pc@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Link: http://lore.kernel.org/lkml/1589915886-22992-1-git-send-email-pc@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array
member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by this
change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200515172926.GA31976@embeddedor
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid having struct branch_stack as a non-last structure member,
use allocated branch stack for PEBS sample.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/2540ed9a-89f1-6d59-10c9-a66cc90db5d2@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Publish instructions on how to apply LSM hooks for access control to
perf_event_open() syscall on Fedora distro with Targeted SELinux policy
and then manage access to the syscall.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-security-module@vger.kernel.org
Cc: selinux@vger.kernel.org
Link: http://lore.kernel.org/lkml/290ded0a-c422-3749-5180-918fed1ee30f@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement selinux sysfs check to see the system is in enforcing mode and
print warning message with pointer to check audit logs.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-security-module@vger.kernel.org
Cc: selinux@vger.kernel.org
Link: http://lore.kernel.org/lkml/819338ce-d160-4a2f-f1aa-d756a2e7c6fc@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use a hashmap between a char* string and a double* value. While bpf's
hashmap entries are size_t in size, we can't guarantee sizeof(size_t) >=
sizeof(double). Avoid a memory allocation when gathering ids by making
0.0 a special value encoded as NULL.
Original map suggestion by Andi Kleen:
https://lore.kernel.org/lkml/20200224210308.GQ160988@tassilo.jf.intel.com/
and seconded by Jiri Olsa:
https://lore.kernel.org/lkml/20200423112915.GH1136647@krava/
Committer notes:
There are fixes that need to land upstream before we can use libbpf's
headers, for now use our copy unconditionally, since the data structures
at this point are exactly the same, no problem.
When the fixes for libbpf's hashmap land upstream, we can fix this up.
Testing it:
Building with LIBBPF=1, i.e. the default:
$ perf -vv | grep -i bpf
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
$ nm ~/bin/perf | grep -i libbpf_ | wc -l
39
$ nm ~/bin/perf | grep -i hashmap_ | wc -l
17
$
Explicitely building without LIBBPF:
$ perf -vv | grep -i bpf
bpf: [ OFF ] # HAVE_LIBBPF_SUPPORT
$
$ nm ~/bin/perf | grep -i libbpf_ | wc -l
0
$ nm ~/bin/perf | grep -i hashmap_ | wc -l
9
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: kp singh <kpsingh@chromium.org>
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200515221732.44078-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow use of hashmap in perf. Modify perf's check-headers.sh script to
check that the files are kept in sync, in the same way kernel headers
are checked. This will warn if they are out of sync at the start of a
perf build.
Committer note:
This starts out of synch as a fix went thru the bpf tree, namely the one
removing the needless libbpf_internal.h include in hashmap.h.
There is also another change related to __WORDSIZE, that as is in
tools/lib/bpf/hashmap.h causes the tools/perf/ build to fail in systems
such as Alpine Linus, that uses the Musl libc, so we need an alternative
way of having __WORDSIZE available, use the one used by
tools/include/linux/bitops.h, that builds in all the systems I have
build containers for.
These differences will be resolved at some point, so keep the warning in
check-headers.sh as a reminder.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: kp singh <kpsingh@chromium.org>
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200515221732.44078-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Joakim reported wrong duration_time value for interval bigger
than 4000 [1].
The problem is in the interval value we pass to update_stats
function, which is typed as 'unsigned int' and overflows when
we get over 2^32 (happens between intervals 4000 and 5000).
Retyping the passed value to unsigned long long.
[1] https://www.spinics.net/lists/linux-perf-users/msg11777.html
Fixes: b90f1333ef ("perf stat: Update walltime_nsecs_stats in interval mode")
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200518131445.3745083-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf compilation fails for NO_LIBBPF=1 DEBUG=1 with:
$ make NO_LIBBPF=1 DEBUG=1
BUILD: Doing 'make -j8' parallel build
CC builtin-trace.o
LD perf-in.o
LINK perf
/usr/bin/ld: perf-in.o: in function `trace__find_bpf_map_by_name':
/home/jolsa/kernel/linux-perf/tools/perf/builtin-trace.c:4608: undefined reference to `bpf_object__find_map_by_name'
collect2: error: ld returned 1 exit status
make[2]: *** [Makefile.perf:631: perf] Error 1
make[1]: *** [Makefile.perf:225: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
Move trace__find_bpf_map_by_name calls under HAVE_LIBBPF_SUPPORT ifdef
and add make test for this.
Committer notes:
Add missing:
run += make_no_libbpf_DEBUG
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200518141027.3765877-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow the CC compiler to accept a CFLAGS environment variable. This
doesn't change the code generated but makes it easier to integrate
running the shell script in build systems like bazel.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Li <liwei391@huawei.com>
Link: http://lore.kernel.org/lkml/20200306071110.130202-4-irogers@google.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the architecture test directory agree with the code comment.
Committer notes:
This was split from a larger patch.
The code was assuming the developer always worked from tools/perf/, so make sure we
do the test -d having $toolsdir/perf/arch/$arch, to match the intent expressed in the comment,
just above that loop.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Li <liwei391@huawei.com>
Link: http://lore.kernel.org/lkml/20200306071110.130202-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Break pmu-events test into 2 and add a test to verify that all pmu
metric expressions simply parse. Try to parse all metric ids/events,
skip/warn if metrics for the current architecture fail to parse. To
support warning for a skip, and an ability for a subtest to describe why
it skips.
Tested on power9, skylakex, haswell, broadwell, westmere, sandybridge and
ivybridge.
May skip/warn on other architectures if metrics are invalid. In
particular s390 is untested, but its expressions are trivial. The
untested architectures with expressions are power8, cascadelakex,
tremontx, skylake, jaketown, ivytown and variants of haswell and
broadwell.
v3. addresses review comments from John Garry <john.garry@huawei.com>,
Jiri Olsa <jolsa@redhat.com> and Arnaldo Carvalho de Melo
<acme@kernel.org>.
v2. changes the commit message as event parsing errors no longer cause
the test to fail.
Committer notes:
Check the return value of strtod() to fix the build in systems where
that function is declared with attribute warn_unused_result.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200513212933.41273-1-irogers@google.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now subtests can inform why a test was skipped. The upcoming patch
improvint PMU event metric testing will use it.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200513212933.41273-1-irogers@google.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On a CPU like skylakex an uncore_iio_0 PMU may alias with
uncore_iio_free_running_0. The latter PMU doesn't support fc_mask as a
parameter and so pmu_config_term fails. Typically parse_events_add_pmu
is called in a loop where if one alias succeeds errors are ignored,
however, if multiple errors occur parse_events__handle_error will
currently give a WARN_ONCE.
This change removes the WARN_ONCE in parse_events__handle_error and
makes it a pr_debug. It adds verbose messages to parse_events_add_pmu
warning that non-fatal errors may occur, while giving details on the pmu
and config terms for useful context. pmu_config_term is altered so the
failing term and pmu are present in the case of the 'unknown term' error
which makes spotting the free_running case more straightforward.
Before:
$ perf --debug verbose=3 stat -M llc_misses.pcie_read sleep 1
Using CPUID GenuineIntel-6-55-4
metric expr unc_iio_data_req_of_cpu.mem_read.part0 + unc_iio_data_req_of_cpu.mem_read.part1 + unc_iio_data_req_of_cpu.mem_read.part2 + unc_iio_data_req_of_cpu.mem_read.part3 for LLC_MISSES.PCIE_READ
found event unc_iio_data_req_of_cpu.mem_read.part0
found event unc_iio_data_req_of_cpu.mem_read.part1
found event unc_iio_data_req_of_cpu.mem_read.part2
found event unc_iio_data_req_of_cpu.mem_read.part3
metric expr unc_iio_data_req_of_cpu.mem_read.part0 + unc_iio_data_req_of_cpu.mem_read.part1 + unc_iio_data_req_of_cpu.mem_read.part2 + unc_iio_data_req_of_cpu.mem_read.part3 for LLC_MISSES.PCIE_READ
found event unc_iio_data_req_of_cpu.mem_read.part0
found event unc_iio_data_req_of_cpu.mem_read.part1
found event unc_iio_data_req_of_cpu.mem_read.part2
found event unc_iio_data_req_of_cpu.mem_read.part3
adding {unc_iio_data_req_of_cpu.mem_read.part0,unc_iio_data_req_of_cpu.mem_read.part1,unc_iio_data_req_of_cpu.mem_read.part2,unc_iio_data_req_of_cpu.mem_read.part3}:W,{unc_iio_data_req_of_cpu.mem_read.part0,unc_iio_data_req_of_cpu.mem_read.part1,unc_iio_data_req_of_cpu.mem_read.part2,unc_iio_data_req_of_cpu.mem_read.part3}:W
intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
WARNING: multiple event parsing errors
...
Invalid event/parameter 'fc_mask'
...
After:
$ perf --debug verbose=3 stat -M llc_misses.pcie_read sleep 1
Using CPUID GenuineIntel-6-55-4
metric expr unc_iio_data_req_of_cpu.mem_read.part0 + unc_iio_data_req_of_cpu.mem_read.part1 + unc_iio_data_req_of_cpu.mem_read.part2 + unc_iio_data_req_of_cpu.mem_read.part3 for LLC_MISSES.PCIE_READ
found event unc_iio_data_req_of_cpu.mem_read.part0
found event unc_iio_data_req_of_cpu.mem_read.part1
found event unc_iio_data_req_of_cpu.mem_read.part2
found event unc_iio_data_req_of_cpu.mem_read.part3
metric expr unc_iio_data_req_of_cpu.mem_read.part0 + unc_iio_data_req_of_cpu.mem_read.part1 + unc_iio_data_req_of_cpu.mem_read.part2 + unc_iio_data_req_of_cpu.mem_read.part3 for LLC_MISSES.PCIE_READ
found event unc_iio_data_req_of_cpu.mem_read.part0
found event unc_iio_data_req_of_cpu.mem_read.part1
found event unc_iio_data_req_of_cpu.mem_read.part2
found event unc_iio_data_req_of_cpu.mem_read.part3
adding {unc_iio_data_req_of_cpu.mem_read.part0,unc_iio_data_req_of_cpu.mem_read.part1,unc_iio_data_req_of_cpu.mem_read.part2,unc_iio_data_req_of_cpu.mem_read.part3}:W,{unc_iio_data_req_of_cpu.mem_read.part0,unc_iio_data_req_of_cpu.mem_read.part1,unc_iio_data_req_of_cpu.mem_read.part2,unc_iio_data_req_of_cpu.mem_read.part3}:W
intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
Attempting to add event pmu 'uncore_iio_free_running_5' with 'unc_iio_data_req_of_cpu.mem_read.part0,' that may result in non-fatal errors
After aliases, add event pmu 'uncore_iio_free_running_5' with 'fc_mask,ch_mask,umask,event,' that may result in non-fatal errors
Attempting to add event pmu 'uncore_iio_free_running_3' with 'unc_iio_data_req_of_cpu.mem_read.part0,' that may result in non-fatal errors
After aliases, add event pmu 'uncore_iio_free_running_3' with 'fc_mask,ch_mask,umask,event,' that may result in non-fatal errors
Attempting to add event pmu 'uncore_iio_free_running_1' with 'unc_iio_data_req_of_cpu.mem_read.part0,' that may result in non-fatal errors
After aliases, add event pmu 'uncore_iio_free_running_1' with 'fc_mask,ch_mask,umask,event,' that may result in non-fatal errors
Multiple errors dropping message: unknown term 'fc_mask' for pmu 'uncore_iio_free_running_3' (valid terms: event,umask,config,config1,config2,name,period,percore)
...
So before you see a 'WARNING: multiple event parsing errors' and
'Invalid event/parameter'. After you see 'Attempting... that may result
in non-fatal errors' then 'Multiple errors...' with details that
'fc_mask' wasn't known to a free running counter. While not completely
clean, this makes it clearer that an error hasn't really occurred.
v2. addresses review feedback from Jiri Olsa <jolsa@redhat.com>.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200513220635.54700-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a destructor for strings to reclaim memory in the event of errors.
Free the ID given for a lookup, it was previously strdup-ed in the lex
code.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200513000318.15166-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 7eec00a747 ("perf symbols: Consolidate symbol fixup issue")
removed powerpc specific sym-handling.c file from Build. This wasn't
caught by build CI because all functions in this file are declared
as __weak in common code. Fix it.
Fixes: 7eec00a747 ("perf symbols: Consolidate symbol fixup issue")
Reported-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20200509112113.174745-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test for fix in:
commit 5741da3dee4c ("perf expr: Parse numbers as doubles")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200513062752.3681-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The setting and checking of 'done' contains a rare race where the signal
handler setting 'done' is run after checking to break the loop, but
before waiting in evlist__poll(). In this case, the main loop won't wake
up until either another signal is sent, or the perf data fd causes a
wake up.
The following simple script can trigger this condition (but you might
need to run it for several hours):
for ((i = 0; i >= 0; i++)) ; do
echo "Loop $i"
delay=$(echo "scale=4; 0.1 * $RANDOM/32768" | bc)
./perf record -- sleep 30000000 >/dev/null&
pid=$!
sleep $delay
kill -TERM $pid
echo "PID $pid"
wait $pid
done
At some point, the loop will stall. Adding logging, even though perf has
received the SIGTERM and set 'done = 1', perf will remain sleeping until
a second signal is sent.
Committer notes:
Make this dependent on HAVE_EVENTFD_SUPPORT, so that we continue
building on older systems without the eventfd syscall.
Signed-off-by: Anand K Mistry <amistry@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200513122012.v3.1.I4d7421c6bbb1f83ea58419082481082e19097841@changeid
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To be consistent with other such auto-detected features.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anand K Mistry <amistry@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like with the other fields, this probably isn't fixing anything
observable as evsel__new() uses zalloc() for the whole 'struct evsel',
but since evsels can be embedded in larger structures and maybe those
larger structures don't use zalloc() for some reason, init it to NULL
just in case.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If allocated, perf_pkg_mask and metric_events need freeing.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200512235918.10732-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When applying a patch by Ian I incorrectly converted to zfree() an
expression that involved testing some other struct member, not the one
being freed, which lead to bugs reproduceable by:
$ perf stat -e i/bs,tsc,L2/o sleep 1
WARNING: multiple event parsing errors
Segmentation fault (core dumped)
$
Fix it by restoring the test for pos->free_str before freeing
pos->val.str, but continue using zfree(&pos->val.str) to set that member
to NULL after freeing it.
Reported-by: Ian Rogers <irogers@google.com>
Fixes: e8dfb81838 ("perf parse-events: Fix memory leaks found on parse_events")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: clang-built-linux@googlegroups.com
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian reported that is_bpf_image is not working the way it was intended
- passing on trampolines and dispatcher names. Instead it returned true
for all the bpf names.
The reason even this logic worked properly is that all bpf objects, even
trampolines and dispatcher, were assigned DSO_BINARY_TYPE__BPF_IMAGE
binary_type.
The later for bpf_prog objects, the binary_type was fixed in bpf load
event processing, which is executed after the ksymbol code.
Fixing the is_bpf_image logic, so it properly recognizes trampoline and
dispatcher objects.
Fixes: 3c29d4483e ("perf annotate: Add basic support for bpf_image")
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200512122310.3154754-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the event is passed as list, the default events should be listed as
per 'perf mem record -e list'. Previous behavior is:
$ perf c2c record -e list
failed: event 'list' not found, use '-e list' to get list of available events
Usage: perf c2c record [<options>] [<command>]
or: perf c2c record [<options>] -- <command> [<options>]
-e, --event <event> event selector. Use 'perf mem record -e list' to list available events
$
New behavior:
$ perf c2c record -e list
ldlat-loads : available
ldlat-stores : available
v3: is a rebase.
v2: addresses review comments by Jiri Olsa.
https://lore.kernel.org/lkml/20191127081844.GH32367@krava/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200507220604.3391-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During the processing of /proc during event synthesis new processes may
start. Add a dummy event if /proc is to be processed, to capture mmaps
for starting processes. This reuses the existing logic for
initial-delay.
v3 fixes the attr test of test-record-C0
v2 fixes the dummy event configuration and a branch stack issue.
Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200422173615.59436-1-irogers@google.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A dummy event never triggers any actual counter and therefore cannot be
used with branch_stack
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200422173615.59436-1-irogers@google.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A big uncore event group is split into multiple small groups which only
include the uncore events from the same PMU. This has been supported in
the commit 3cdc5c2cb9 ("perf parse-events: Handle uncore event
aliases in small groups properly").
If the event's PMU name starts to repeat, it must be a new event.
That can be used to distinguish the leader from other members.
But now it only compares the pointer of pmu_name
(leader->pmu_name == evsel->pmu_name).
If we use "perf stat -M LLC_MISSES.PCIE_WRITE -a" on cascadelakex,
the event list is:
evsel->name evsel->pmu_name
---------------------------------------------------------------
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_4 (as leader)
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_2
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_0
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_5
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_3
unc_iio_data_req_of_cpu.mem_write.part0 uncore_iio_1
unc_iio_data_req_of_cpu.mem_write.part1 uncore_iio_4
......
For the event "unc_iio_data_req_of_cpu.mem_write.part1" with
"uncore_iio_4", it should be the event from PMU "uncore_iio_4".
It's not a new leader for this PMU.
But if we use "(leader->pmu_name == evsel->pmu_name)", the check
would be failed and the event is stored to leaders[] as a new
PMU leader.
So this patch uses strcmp to compare the PMU name between events.
Fixes: d4953f7ef1 ("perf parse-events: Fix 3 use after frees found with clang ASAN")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200430003618.17002-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If an expression yields 0 and is then divided-by/modulus-by then the
parsing aborts. Add a debug error message to better enable debugging
when this happens.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-11-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mismatched parentheses.
Fixes: 7f3cf5ac77 (perf vendor events power9: Cpi_breakdown & estimated_dcache_miss_cpi metrics)
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Paul Clarke <pc@us.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mismatched parentheses.
Fixes: dd81eafacc (perf vendor events power8: Cpi_breakdown & estimated_dcache_miss_cpi metrics)
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Paul Clarke <pc@us.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Only effects parser debugging (disabled by default). Enables displaying
'--accepting rule at line .. ("...").
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is expected in expr.y and metrics use floating point values such as
x86 broadwell IFetch_Line_Utilization.
Fixes: 26226a9772 (perf expr: Move expr lexer to flex)
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Large metrics such as Branch_Misprediction_Cost_SMT on x86 broadwell
need more space.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Corrects parse errors in expr__find_other of expressions with min.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove over escaping with \\.
Fixes: fd5500989c (perf vendor events intel: Update metrics from TMAM 3.5)
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove over escaping with \\.
Remove extraneous if 1 if 0 == 1 else 0 else 0.
Fixes: fd5500989c (perf vendor events intel: Update metrics from TMAM 3.5)
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current expression allows 2 escaped '-,=' characters. However, some
metrics require more, for example Haswell DRAM_BW_Use.
Fixes: 26226a9772 (perf expr: Move expr lexer to flex)
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200501173333.227162-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Callchains are automatically initialized by checking on event's
sample_type. For pipe mode we need to put this check into attr event
code.
Moving the callchains setup code into callchain_param_setup function and
calling it from attr event process code.
This enables pipe output having callchains, like:
# perf record -g -e 'raw_syscalls:sys_enter' true | perf script
# perf record -g -e 'raw_syscalls:sys_enter' true | perf report
Committer notes:
We still need the next patch for the above output to work.
Reported-by: Paul Khuong <pvk@pvk.ca>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200507095024.2789147-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian came with the idea of having support to read the pipe data also from
file. Currently pipe mode files fail like:
$ perf record -o - sleep 1 > /tmp/perf.pipe.data
$ perf report -i /tmp/perf.pipe.data
incompatible file format (rerun with -v to learn more)
This patch adds the support to do that by trying the pipe header first,
and if its successfully detected, switching the perf data to pipe mode.
Committer testing:
# ls
# perf record -a -o - sleep 1 > /tmp/perf.pipe.data
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
# ls
# perf report -i /tmp/perf.pipe.data | head -25
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 511 of event 'cycles'
# Event count (approx.): 178447276
#
# Overhead Command Shared Object Symbol
# ........ ........ ................. ...........................................................................................
#
65.49% swapper [kernel.kallsyms] [k] native_safe_halt
6.45% chromium libblink_core.so [.] blink::SelectorChecker::CheckOne
4.08% chromium libblink_core.so [.] blink::SelectorQuery::ExecuteForTraverseRoot<blink::AllElementsSelectorQueryTrait>
2.25% chromium libblink_core.so [.] blink::SelectorQuery::FindTraverseRootsAndExecute<blink::AllElementsSelectorQueryTrait>
2.11% chromium libblink_core.so [.] blink::SelectorChecker::MatchSelector
1.91% chromium libblink_core.so [.] blink::Node::OwnerShadowHost
1.31% chromium libblink_core.so [.] blink::Node::parentNode@plt
1.22% chromium libblink_core.so [.] blink::Node::parentNode
0.59% chromium libblink_core.so [.] blink::AnyAttributeMatches
0.58% chromium libv8.so [.] v8::internal::GlobalHandles::Create
0.58% chromium libblink_core.so [.] blink::NodeTraversal::NextAncestorSibling
0.55% chromium libv8.so [.] v8::internal::RegExpGlobalCache::RegExpGlobalCache
0.55% chromium libblink_core.so [.] blink::Node::ContainingShadowRoot
0.55% chromium libblink_core.so [.] blink::NodeTraversal::NextAncestorSibling@plt
#
Original-patch-by: Ian Rogers <irogers@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Khuong <pvk@pvk.ca>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200507095024.2789147-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to set 'fd' position in pipe mode, the file descriptor
is already in proper place. Moreover the lseek will fail on pipe
descriptor and that's why it's been working properly.
I was tempted to remove the lseek calls completely, because it seems
that tracing data event was always synthesized only in pipe mode, so
there's no need for 'file' mode handling. But I guess there was a reason
behind this and there might (however unlikely) be a perf.data that we
could break processing for.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Khuong <pvk@pvk.ca>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200507095024.2789147-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Even with fully built tree, we still display extra output when make is
invoked, like:
$ make
BUILD: Doing 'make -j8' parallel build
DESCEND plugins
make[3]: Nothing to be done for 'plugins/libtraceevent-dynamic-list'.
Changing the make descend directly to plugins directory, which quiets
those messages down.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Khuong <pvk@pvk.ca>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200507095024.2789147-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a probe point is expanded to several places (like inlined) and if
some of them are skipped because of blacklisted or __init function,
those trace_events has no event name. It must be skipped while showing
results.
Without this fix, you can see "(null):(null)" on the list,
# ./perf probe request_resource
reserve_setup is out of .text, skip it.
Added new events:
(null):(null) (on request_resource)
probe:request_resource (on request_resource)
You can now use it in all perf tools, such as:
perf record -e probe:request_resource -aR sleep 1
#
With this fix, it is ignored:
# ./perf probe request_resource
reserve_setup is out of .text, skip it.
Added new events:
probe:request_resource (on request_resource)
You can now use it in all perf tools, such as:
perf record -e probe:request_resource -aR sleep 1
#
Fixes: 5a51fcd1f3 ("perf probe: Skip kernel symbols which is out of .text")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/158763968263.30755.12800484151476026340.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit 03db8b583d ("perf tools: Fix
maps__find_symbol_by_name()") introduced map address range check in
maps__find_symbol_by_name(), we can not get "_etext" from kernel map
because _etext is placed on the edge of the kernel .text section (=
kernel map in perf.)
To fix this issue, this checks the address correctness by map address
range information (map->start and map->end) instead of using _etext
address.
This can cause an error if the target inlined function is embedded in
both __init function and normal function.
For exaample, request_resource() is a normal function but also embedded
in __init reserve_setup(). In this case, the probe point in
reserve_setup() must be skipped.
However, without this fix, it failes to setup all probe points:
# ./perf probe -v request_resource
probe-definition(0): request_resource
symbol:request_resource file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /usr/lib/debug/lib/modules/5.5.17-200.fc31.x86_64/vmlinux for symbols
Open Debuginfo file: /usr/lib/debug/lib/modules/5.5.17-200.fc31.x86_64/vmlinux
Try to find probe point from debuginfo.
Matched function: request_resource [15e29ad]
found inline addr: 0xffffffff82fbf892
Probe point found: reserve_setup+204
found inline addr: 0xffffffff810e9790
Probe point found: request_resource+0
Found 2 probe_trace_events.
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Opening /sys/kernel/debug/tracing//README write=0
Writing event: p:probe/request_resource _text+33290386
Failed to write event: Invalid argument
Error: Failed to add events. Reason: Invalid argument (Code: -22)
#
With this fix,
# ./perf probe request_resource
reserve_setup is out of .text, skip it.
Added new events:
(null):(null) (on request_resource)
probe:request_resource (on request_resource)
You can now use it in all perf tools, such as:
perf record -e probe:request_resource -aR sleep 1
#
Fixes: 03db8b583d ("perf tools: Fix maps__find_symbol_by_name()")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/158763967332.30755.4922496724365529088.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to check kprobe blacklist address correctly with relocated address
by adjusting debuginfo address.
Since the address in the debuginfo is same as objdump, it is different
from relocated kernel address with KASLR. Thus, 'perf probe' always
misses to catch the blacklisted addresses.
Without this patch, 'perf probe' can not detect the blacklist addresses
on a KASLR enabled kernel.
# perf probe kprobe_dispatcher
Failed to write event: Invalid argument
Error: Failed to add events.
#
With this patch, it correctly shows the error message.
# perf probe kprobe_dispatcher
kprobe_dispatcher is blacklisted function, skip it.
Probe point 'kprobe_dispatcher' not found.
Error: Failed to add events.
#
Fixes: 9aaf5a5f47 ("perf probe: Check kprobes blacklist when adding new events")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/158763966411.30755.5882376357738273695.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the commit 6a13a0d7b4 ("ftrace/kprobe: Show the maxactive number
on kprobe_events") introduced to show the instance number of kretprobe
events, the length of the 1st format of the kprobe event will not 1, but
it can be longer. This caused a parser error in perf-probe.
Skip the length check the 1st format of the kprobe event to accept this
instance number.
Without this fix:
# perf probe -a vfs_read%return
Added new event:
probe:vfs_read__return (on vfs_read%return)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read__return -aR sleep 1
# perf probe -l
Semantic error :Failed to parse event name: r16:probe/vfs_read__return
Error: Failed to show event list.
And with this fixes:
# perf probe -a vfs_read%return
...
# perf probe -l
probe:vfs_read__return (on vfs_read%return)
Fixes: 6a13a0d7b4 ("ftrace/kprobe: Show the maxactive number on kprobe_events")
Reported-by: Yuxuan Shui <yshuiv7@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Yuxuan Shui <yshuiv7@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207587
Link: http://lore.kernel.org/lkml/158877535215.26469.1113127926699134067.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As these are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As these are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a couple large ecmp group nexthop selftests to cover
the remnant fixed by d69100b8ee.
The tests create 100 x32 ecmp groups of ipv4 and ipv6 and then
dump them. On kernels without the fix, they will fail due
to data remnant during the dump.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To align with recent recommended values. Will be configurable by future
patches.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This cpupower for update for Linux 5.8-rc1 consists of a single
patch to fix coccicheck unneeded semicolon warning.
-----BEGIN PGP SIGNATURE-----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=cYtw
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility updates for v5.8-rc1 from Shuah Khan:
"This cpupower update for Linux 5.8-rc1 consists of a single
patch to fix coccicheck unneeded semicolon warning."
* tag 'linux-cpupower-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Remove unneeded semicolon
The MSCC bug fix in 'net' had to be slightly adjusted because the
register accesses are done slightly differently in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix RCU warnings in ipv6 multicast router code, from Madhuparna
Bhowmik.
2) Nexthop attributes aren't being checked properly because of
mis-initialized iterator, from David Ahern.
3) Revert iop_idents_reserve() change as it caused performance
regressions and was just working around what is really a UBSAN bug
in the compiler. From Yuqi Jin.
4) Read MAC address properly from ROM in bmac driver (double iteration
proceeds past end of address array), from Jeremy Kerr.
5) Add Microsoft Surface device IDs to r8152, from Marc Payne.
6) Prevent reference to freed SKB in __netif_receive_skb_core(), from
Boris Sukholitko.
7) Fix ACK discard behavior in rxrpc, from David Howells.
8) Preserve flow hash across packet scrubbing in wireguard, from Jason
A. Donenfeld.
9) Cap option length properly for SO_BINDTODEVICE in AX25, from Eric
Dumazet.
10) Fix encryption error checking in kTLS code, from Vadim Fedorenko.
11) Missing BPF prog ref release in flow dissector, from Jakub Sitnicki.
12) dst_cache must be used with BH disabled in tipc, from Eric Dumazet.
13) Fix use after free in mlxsw driver, from Jiri Pirko.
14) Order kTLS key destruction properly in mlx5 driver, from Tariq
Toukan.
15) Check devm_platform_ioremap_resource() return value properly in
several drivers, from Tiezhu Yang.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits)
net: smsc911x: Fix runtime PM imbalance on error
net/mlx4_core: fix a memory leak bug.
net: ethernet: ti: cpsw: fix ASSERT_RTNL() warning during suspend
net: phy: mscc: fix initialization of the MACsec protocol mode
net: stmmac: don't attach interface until resume finishes
net: Fix return value about devm_platform_ioremap_resource()
net/mlx5: Fix error flow in case of function_setup failure
net/mlx5e: CT: Correctly get flow rule
net/mlx5e: Update netdev txq on completions during closure
net/mlx5: Annotate mutex destroy for root ns
net/mlx5: Don't maintain a case of del_sw_func being null
net/mlx5: Fix cleaning unmanaged flow tables
net/mlx5: Fix memory leak in mlx5_events_init
net/mlx5e: Fix inner tirs handling
net/mlx5e: kTLS, Destroy key object after destroying the TIS
net/mlx5e: Fix allowed tc redirect merged eswitch offload cases
net/mlx5: Avoid processing commands before cmdif is ready
net/mlx5: Fix a race when moving command interface to events mode
net/mlx5: Add command entry handling completion
rxrpc: Fix a memory leak in rxkad_verify_response()
...
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-05-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 50 non-merge commits during the last 8 day(s) which contain
a total of 109 files changed, 2776 insertions(+), 2887 deletions(-).
The main changes are:
1) Add a new AF_XDP buffer allocation API to the core in order to help
lowering the bar for drivers adopting AF_XDP support. i40e, ice, ixgbe
as well as mlx5 have been moved over to the new API and also gained a
small improvement in performance, from Björn Töpel and Magnus Karlsson.
2) Add getpeername()/getsockname() attach types for BPF sock_addr programs
in order to allow for e.g. reverse translation of load-balancer backend
to service address/port tuple from a connected peer, from Daniel Borkmann.
3) Improve the BPF verifier is_branch_taken() logic to evaluate pointers
being non-NULL, e.g. if after an initial test another non-NULL test on
that pointer follows in a given path, then it can be pruned right away,
from John Fastabend.
4) Larger rework of BPF sockmap selftests to make output easier to understand
and to reduce overall runtime as well as adding new BPF kTLS selftests
that run in combination with sockmap, also from John Fastabend.
5) Batch of misc updates to BPF selftests including fixing up test_align
to match verifier output again and moving it under test_progs, allowing
bpf_iter selftest to compile on machines with older vmlinux.h, and
updating config options for lirc and v6 segment routing helpers, from
Stanislav Fomichev, Andrii Nakryiko and Alan Maguire.
6) Conversion of BPF tracing samples outdated internal BPF loader to use
libbpf API instead, from Daniel T. Lee.
7) Follow-up to BPF kernel test infrastructure in order to fix a flake in
the XDP selftests, from Jesper Dangaard Brouer.
8) Minor improvements to libbpf's internal hashmap implementation, from
Ian Rogers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
test_lirc_mode2.sh assumes presence of /sys/class/rc/rc0/lirc*/uevent
which will not be present unless CONFIG_LIRC=y
Fixes: 6bdd533cee ("bpf: add selftest for lirc_mode2 type program")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1590147389-26482-3-git-send-email-alan.maguire@oracle.com
test_seg6_loop.o uses the helper bpf_lwt_seg6_adjust_srh();
it will not be present if CONFIG_IPV6_SEG6_BPF is not specified.
Fixes: b061017f8b ("selftests/bpf: add realistic loop tests")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1590147389-26482-2-git-send-email-alan.maguire@oracle.com
Getting a clean BPF selftests run involves ensuring latest trunk LLVM/clang
are used, pahole is recent (>=1.16) and config matches the specified
config file as closely as possible. Add to bpf_devel_QA.rst and point
tools/testing/selftests/bpf/README.rst to it.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/1590146674-25485-1-git-send-email-alan.maguire@oracle.com
Starting from iputils s20190709 (used in Fedora 31), arping does not
support timeout being specified as a decimal:
$ arping -c 1 -I swp1 -b 192.0.2.66 -q -w 0.1
arping: invalid argument: '0.1'
Previously, such timeouts were rounded to an integer.
Fix this by specifying the timeout as an integer.
Fixes: a5ee171d08 ("selftests: mlxsw: qos_mc_aware: Add a test for UC awareness")
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable is used by log_test() to check if the test case completely
successfully or not. In case it is not initialized at the start of a
test case, it is possible for the test case to fail despite not
encountering any errors.
Example:
```
...
TEST: Trap group statistics [ OK ]
TEST: Trap policer [FAIL]
Policer drop counter was not incremented
TEST: Trap policer binding [FAIL]
Policer drop counter was not incremented
```
Failure of trap_policer_test() caused trap_policer_bind_test() to fail
as well.
Fix by adding missing initialization of the variable.
Fixes: 5fbff58e27 ("selftests: netdevsim: Add test cases for devlink-trap policers")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To improve the usability of KUnit, defconfig is used
by default if no kunitconfig is present.
* https://bugzilla.kernel.org/show_bug.cgi?id=205259
Fixed up minor merge conflicts - Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Daniel Borkmann says:
====================
pull-request: bpf 2020-05-22
The following pull-request contains BPF updates for your *net* tree.
We've added 3 non-merge commits during the last 3 day(s) which contain
a total of 5 files changed, 69 insertions(+), 11 deletions(-).
The main changes are:
1) Fix to reject mmap()'ing read-only array maps as writable since BPF verifier
relies on such map content to be frozen, from Andrii Nakryiko.
2) Fix breaking audit from secid_to_secctx() LSM hook by avoiding to use
call_int_hook() since this hook is not stackable, from KP Singh.
3) Fix BPF flow dissector program ref leak on netns cleanup, from Jakub Sitnicki.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds ipv4 and ipv6 fdb nexthop api tests to fib_nexthops.sh.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To make KUnit easier to use, and to avoid overwriting object and
.config files, the default KUnit build directory is set to .kunit
* Related bug: https://bugzilla.kernel.org/show_bug.cgi?id=205221
Fixed up minor merge conflicts - Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This can happen if a testing node doesn't have RTC (real time clock)
hardware or it doesn't support alarms.
Fixes: 61c5767603 ("selftests/timens: Add Time Namespace test for supported clocks")
Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
TPM2 tests set uses /dev/tpm0 and /dev/tpmrm0 without check if they
are available. In case, when these devices are not available test
fails, but expected behaviour is skipped test.
Signed-off-by: Nikita Sobolev <Nikita.Sobolev@synopsys.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The core mask display is wrong in some cases. This is showing more
cpus than the mask has. This is because mask is 64 bit but it used
with BIT() macro to get the presence of CPU which doesn't support
unsigned long long. Added a new macro for BIT_ULL and use that
to get the presence of a CPU.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Increase CPU count so that more than 64 is supported in one request.
For example:
sudo ./intel-speed-select -d --cpu 0-66 core-power assoc -clos 0
The above command stops at 63. With this change, it can support more
CPU numbers from 0-255.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
The 'intel-speed-select -f json perf-profile get-lock-status' command
outputs the package, die, and cpu data as separate fields.
ex)
"package-0": {
"die-0": {
"cpu-0": {
Commit 74062363f8 ("tools/power/x86/intel-speed-select: Avoid duplicate Package strings for json") prettied this output so that it is a single line for
some json output commands and the same should be done for other commands.
Output package, die, and cpu info in a single line when using json output.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Provide a very basic selftest for getcpu() which similarly to our existing
test for gettimeofday() looks up the function in the vDSO and prints the
results it gets if the function exists and succeeds.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Both vdso_test_gettimeofday and vdso_standalone_test_x86 use the library in
parse_vdso.c but each separately declares the API it offers which is not
ideal. Create a header file with prototypes of the functions and use it in
both the library and the tests to ensure that the same prototypes are used
throughout.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the vDSO kselftests have a test called vdso_test which tests
the vDSO implementation of gettimeofday(). In preparation for adding
tests for other vDSO functionality rename this test to reflect what's
going on.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a named pipe as an exec target to make sure that non-regular
files are rejected by execve() with EACCES. This can help verify
commit 73601ea5b7 ("fs/open.c: allow opening only regular files
during execve()").
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Adding a printk to test_sk_lookup_kern created the reported failure
where a pointer type is checked twice for NULL. Lets add it to the
progs test test_sk_lookup_kern.c so we test the case from C all the
way into the verifier.
We already have printk's in selftests so seems OK to add another one.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159009170603.6313.1715279795045285176.stgit@john-Precision-5820-Tower
When we have pointer type that is known to be non-null we only follow
the non-null branch. This adds tests to cover the map_value pointer
returned from a map lookup. To force an error if both branches are
followed we do an ALU op on R10.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159009168650.6313.7434084136067263554.stgit@john-Precision-5820-Tower
When we have pointer type that is known to be non-null and comparing
against zero we only follow the non-null branch. This adds tests to
cover this case for reference tracking. Also add the other case when
comparison against a non-zero value and ensure we still fail with
unreleased reference.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/159009166599.6313.1593680633787453767.stgit@john-Precision-5820-Tower
While working on commit b5372fe5dc ("exec: load_script: Do not exec
truncated interpreter path"), I wrote a series of test scripts to verify
corner cases. However, soon after, commit 6eb3c3d0a5 ("exec: increase
BINPRM_BUF_SIZE to 256") landed, resulting in the tests needing to be
refactored for the larger BINPRM_BUF_SIZE, which got lost on my TODO
list. During the recent exec refactoring work[1], the need for these tests
resurfaced, so I've finished them up for addition to the kernel selftests.
[1] https://lore.kernel.org/lkml/202005191144.E3112135@keescook/
Link: https://lkml.kernel.org/r/202005200204.D07DF079@keescook
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
gcc-10 switched to defaulting to -fno-common, which broke iproute2-5.4.
This was fixed in iproute-5.6, so switch to that. Because we're after a
stable testing surface, we generally don't like to bump these
unnecessarily, but in this case, being able to actually build is a basic
necessity.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As discussed in [0], it's dangerous to allow mapping BPF map, that's meant to
be frozen and is read-only on BPF program side, because that allows user-space
to actually store a writable view to the page even after it is frozen. This is
exacerbated by BPF verifier making a strong assumption that contents of such
frozen map will remain unchanged. To prevent this, disallow mapping
BPF_F_RDONLY_PROG mmap()'able BPF maps as writable, ever.
[0] https://lore.kernel.org/bpf/CAEf4BzYGWYhXdp6BJ7_=9OQPJxQpgug080MMjdSB72i9R+5c6g@mail.gmail.com/
Fixes: fc9702273e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY")
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/bpf/20200519053824.1089415-1-andriin@fb.com
Objtool currently only compiles for x86 architectures. This is
fine as it presently does not support tooling for other
architectures. However, we would like to be able to convert other
kernel tools to run as objtool sub commands because they too
process ELF object files. This will allow us to convert tools
such as recordmcount to use objtool's ELF code.
Since much of recordmcount's ELF code is copy-paste code to/from
a variety of other kernel tools (look at modpost for example) this
means that if we can convert recordmcount we can convert more.
We define weak definitions for subcommand entry functions and other weak
definitions for shared functions critical to building existing
subcommands. These return 127 when the command is missing which signify
tools that do not exist on all architectures. In this case the "check"
and "orc" tools do not exist on all architectures so we only add them
for x86. Future changes adding support for "check", to arm64 for
example, can then modify the SUBCMD_CHECK variable when building for
arm64.
Objtool is not currently wired in to KConfig to be built for other
architectures because it's not needed for those architectures and
there are no commands it supports other than those for x86. As more
command support is enabled on various architectures the necessary
KConfig changes can be made (e.g. adding "STACK_VALIDATION") to
trigger building objtool.
[ jpoimboe: remove aliases, add __weak macro, add error messages ]
Cc: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
The objtool_file structure describes the files objtool works on,
is used by the check subcommand, and the check.h header is included
by the orc subcommands so it's presently used by all subcommands.
Since the structure will be useful in all subcommands besides check,
and some subcommands may not want to include check.h to get the
definition, split the structure out into a new header meant for use
by all objtool subcommands.
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Reviewed-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
When the user requests help it's not an error so do not exit with
a non-zero exit code. This is not especially useful for a user but
any script that might wish to check that objtool --help is at least
available can't rely on the exit code to crudely check that, for
example, building an objtool executable succeeds.
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
check_kcov_mode() is called by write_comp_data() and
__sanitizer_cov_trace_pc(), which are already on the uaccess safe list.
It's notrace and doesn't call out to anything else, so add it to the
list too.
This fixes the following warnings:
kernel/kcov.o: warning: objtool: __sanitizer_cov_trace_pc()+0x15: call to check_kcov_mode() with UACCESS enabled
kernel/kcov.o: warning: objtool: write_comp_data()+0x1b: call to check_kcov_mode() with UACCESS enabled
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Add summary lines of test cases and return an error
code if any test case fails so that tester don't have
to monitor the output.
Link: https://lkml.kernel.org/r/158898590533.22749.10269622752797822320.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The gen_kselftest_tar.sh always packages *all* selftests and doesn't
pass along any variables to `make install` to influence what should be
built. This can result in an early error on the command line ("Unknown
tarball format TARGETS=XXX"), or unexpected test failures as the
tarball contains tests people wanted to skip on purpose.
Since the makefile already contains all the logic, we can add a target
for packaging. Keep the default .gz target the script uses, and actually
extend the supported formats by using tar's autodetection.
To not break current workflows, keep the gen_kselftest_tar.sh script as
it is, with an added suggestion to use the makefile target instead.
Signed-off-by: Veronika Kabatova <vkabatov@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
b9f4c01f3e ("selftest/bpf: Make bpf_iter selftest compilable against old vmlinux.h")
missed the fact that bpf_iter_test_kern{3,4}.c are not just including
bpf_iter_test_kern_common.h and need similar bpf_iter_meta re-definition
explicitly.
Fixes: b9f4c01f3e ("selftest/bpf: Make bpf_iter selftest compilable against old vmlinux.h")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200519192341.134360-1-andriin@fb.com
Add some basic stand alone self tests for HMM.
The test program and shell scripts use the test_hmm.ko driver to exercise
HMM functionality in the kernel.
Link: https://lore.kernel.org/r/20200422195028.3684-3-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It's good to be able to compile bpf_iter selftest even on systems that don't
have the very latest vmlinux.h, e.g., for libbpf tests against older kernels in
Travis CI. To that extent, re-define bpf_iter_meta and corresponding bpf_iter
context structs in each selftest. To avoid type clashes with vmlinux.h, rename
vmlinux.h's definitions to get them out of the way.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20200518234516.3915052-1-andriin@fb.com
Extend the existing connect_force_port test to assert get{peer,sock}name programs
as well. The workflow for e.g. IPv4 is as follows: i) server binds to concrete
port, ii) client calls getsockname() on server fd which exposes 1.2.3.4:60000 to
client, iii) client connects to service address 1.2.3.4:60000 binds to concrete
local address (127.0.0.1:22222) and remaps service address to a concrete backend
address (127.0.0.1:60123), iv) client then calls getsockname() on its own fd to
verify local address (127.0.0.1:22222) and getpeername() on its own fd which then
publishes service address (1.2.3.4:60000) instead of actual backend. Same workflow
is done for IPv6 just with different address/port tuples.
# ./test_progs -t connect_force_port
#14 connect_force_port:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/3343da6ad08df81af715a95d61a84fb4a960f2bf.1589841594.git.daniel@iogearbox.net
Make bpftool aware and add the new get{peer,sock}name attach types to its
cli, documentation and bash completion to allow attachment/detachment of
sock_addr programs there.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/9765b3d03e4c29210c4df56a9cc7e52f5f7bb5ef.1589841594.git.daniel@iogearbox.net
Trivial patch to add the new get{peer,sock}name attach types to the section
definitions in order to hook them up to sock_addr cgroup program type.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/7fcd4b1e41a8ebb364754a5975c75a7795051bd2.1589841594.git.daniel@iogearbox.net
As stated in 983695fa67 ("bpf: fix unconnected udp hooks"), the objective
for the existing cgroup connect/sendmsg/recvmsg/bind BPF hooks is to be
transparent to applications. In Cilium we make use of these hooks [0] in
order to enable E-W load balancing for existing Kubernetes service types
for all Cilium managed nodes in the cluster. Those backends can be local
or remote. The main advantage of this approach is that it operates as close
as possible to the socket, and therefore allows to avoid packet-based NAT
given in connect/sendmsg/recvmsg hooks we only need to xlate sock addresses.
This also allows to expose NodePort services on loopback addresses in the
host namespace, for example. As another advantage, this also efficiently
blocks bind requests for applications in the host namespace for exposed
ports. However, one missing item is that we also need to perform reverse
xlation for inet{,6}_getname() hooks such that we can return the service
IP/port tuple back to the application instead of the remote peer address.
The vast majority of applications does not bother about getpeername(), but
in a few occasions we've seen breakage when validating the peer's address
since it returns unexpectedly the backend tuple instead of the service one.
Therefore, this trivial patch allows to customise and adds a getpeername()
as well as getsockname() BPF cgroup hook for both IPv4 and IPv6 in order
to address this situation.
Simple example:
# ./cilium/cilium service list
ID Frontend Service Type Backend
1 1.2.3.4:80 ClusterIP 1 => 10.0.0.10:80
Before; curl's verbose output example, no getpeername() reverse xlation:
# curl --verbose 1.2.3.4
* Rebuilt URL to: 1.2.3.4/
* Trying 1.2.3.4...
* TCP_NODELAY set
* Connected to 1.2.3.4 (10.0.0.10) port 80 (#0)
> GET / HTTP/1.1
> Host: 1.2.3.4
> User-Agent: curl/7.58.0
> Accept: */*
[...]
After; with getpeername() reverse xlation:
# curl --verbose 1.2.3.4
* Rebuilt URL to: 1.2.3.4/
* Trying 1.2.3.4...
* TCP_NODELAY set
* Connected to 1.2.3.4 (1.2.3.4) port 80 (#0)
> GET / HTTP/1.1
> Host: 1.2.3.4
> User-Agent: curl/7.58.0
> Accept: */*
[...]
Originally, I had both under a BPF_CGROUP_INET{4,6}_GETNAME type and exposed
peer to the context similar as in inet{,6}_getname() fashion, but API-wise
this is suboptimal as it always enforces programs having to test for ctx->peer
which can easily be missed, hence BPF_CGROUP_INET{4,6}_GET{PEER,SOCK}NAME split.
Similarly, the checked return code is on tnum_range(1, 1), but if a use case
comes up in future, it can easily be changed to return an error code instead.
Helper and ctx member access is the same as with connect/sendmsg/etc hooks.
[0] https://github.com/cilium/cilium/blob/master/bpf/bpf_sock.c
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/61a479d759b2482ae3efb45546490bacd796a220.1589841594.git.daniel@iogearbox.net
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl7BzV8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGg8EH/A2pXMTxtc96RI4S
sttEsUQqbakFS0Z/2tQPpMGr/qW2e5eHgsTX/a3SiUeZiIXk6f4lMFkMuctzBf7p
X77cNEDwGOEdbtCXTsMcmKSde7sP2zCXsPB8xTWLyE6rnaFRgikwwkeqgkIKhp1h
bvOQV0t9HNGvxGAM0iZeOvQAvFl4vd7nS123/MYbir9cugfQUSJRueQ4BiCiJqVE
6cNA7/vFzDJuFGszzIrJ7HXn/IdQMMWHkvTDjgBw0GZw1mDbGFbfbZwOeTz1ojCt
smUQ4tIFxBa/VA5zx7dOy2P2keHbSVf4VLkZRPcceT7OqVS65ETmFDp+qt5NdWM5
vZ8+7/0=
=CyYH
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rc6' into objtool/core, to pick up fixes and resolve semantic conflict
Resolve structural conflict between:
59566b0b62: ("x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up")
which introduced a new reference to 'ftrace_epilogue', and:
0298739b79: ("x86,ftrace: Fix ftrace_regs_caller() unwind")
Which renamed it to 'ftrace_caller_end'. Rename the new usage site in the merge commit.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The 'pref medium' attribute was moved in iproute2 to be near the prefix
which is where it applies versus after the last nexthop. The nexthop
tests were updated to drop the string from route checking, but it crept
in again with the compat tests.
Fixes: 4dddb5be13 ("selftests: net: add new testcases for nexthop API compat mode sysctl")
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It can be derived dynamically from the trap's name, so drop it.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One blank line is enough.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bugs, mostly for AMD processors. And a few other x86 fixes.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6/0xcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOZuwf/bQZw/SP9awLjOOVsRaSWUmwRGD4q
6KVq9+JYsPU4CyJ7P+vdsFF39a0ixoAnKWqRe/vsXdXZrdYCDUuQxh+7X+lmjKAb
dCQBnoqxI0w3yuxrm9Kn6Xs1AGIWibaRlZnXUKbuyn4ecFrh08OfYKGkYsEovhxK
G4ftY4/xyM7Qvm0fq7ZmzxPrkzd74HDZBvB83R6uiyPiX3w4O9qumqkUogcVXIJX
l3mnvSPClDDX4FOr8uhnU93varuR7Bek4Fh+Abj4uNks/F3z9ooJO9Hy9E+V5fhY
g6Oj2IrxDwJ2G6hqyucr1kujukJC1bX2nMZ1O4gNayXsxZEU/JtI0Y26SA==
=EzBt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"A new testcase for guest debugging (gdbstub) that exposed a bunch of
bugs, mostly for AMD processors. And a few other x86 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce
KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c
KVM: SVM: Disable AVIC before setting V_IRQ
KVM: Introduce kvm_make_all_cpus_request_except()
KVM: VMX: pass correct DR6 for GD userspace exit
KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6
KVM: SVM: keep DR6 synchronized with vcpu->arch.dr6
KVM: nSVM: trap #DB and #BP to userspace if guest debugging is on
KVM: selftests: Add KVM_SET_GUEST_DEBUG test
KVM: X86: Fix single-step with KVM_SET_GUEST_DEBUG
KVM: X86: Set RTM for DB_VECTOR too for KVM_EXIT_DEBUG
KVM: x86: fix DR6 delivery for various cases of #DB injection
KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
Until now we have only had minimal ktls+sockmap testing when being
used with helpers and different sendmsg/sendpage patterns. Add a
pass with ktls here.
To run just ktls tests,
$ ./test_sockmap --whitelist="ktls"
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939736278.15176.5435314315563203761.stgit@john-Precision-5820-Tower
This adds a blacklist to test_sockmap. For example, now we can run
all apply and cork tests except those with timeouts by doing,
$ ./test_sockmap --whitelist "apply,cork" --blacklist "hang"
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939734350.15176.6643981099665208826.stgit@john-Precision-5820-Tower
Allow running specific tests with a comma deliminated whitelist. For example
to run all apply and cork tests.
$ ./test_sockmap --whitelist="cork,apply"
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939732464.15176.1959113294944564542.stgit@john-Precision-5820-Tower
At the moment test_sockmap runs all 800+ tests ungrouped which is not
ideal because it makes it hard to see what is failing but also more
importantly its hard to confirm all cases are tested. Additionally,
after inspecting we noticed the runtime is bloated because we run
many duplicate tests. Worse some of these tests are known error cases
that wait for the recvmsg handler to timeout which creats long delays.
Also we noted some tests were not clearing their options and as a
result the following tests would run with extra and incorrect options.
Fix this by reorganizing test code so its clear what tests are running
and when. Then it becomes easy to remove duplication and run tests with
only the set of send/recv patterns that are relavent.
To accomplish this break test_sockmap into subtests and remove
unnecessary duplication. The output is more readable now and
the runtime reduced.
Now default output prints subtests like this,
$ ./test_sockmap
# 1/ 6 sockmap:txmsg test passthrough:OK
...
#22/ 1 sockhash:txmsg test push/pop data:OK
Pass: 22 Fail: 0
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939728384.15176.13601520183665880762.stgit@john-Precision-5820-Tower
The recv thread in test_sockmap waits to receive all bytes from sender but
in the case we use pop data it may wait for more bytes then actually being
sent. This stalls the test harness for multiple seconds. Because this
happens in multiple tests it slows time to run the selftest.
Fix by doing a better job of accounting for total bytes when pop helpers
are used.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939726542.15176.5964532245173539540.stgit@john-Precision-5820-Tower
Running test_sockmap with arguments to specify a test pattern requires
including a cgroup argument. Instead of requiring this if the option is
not provided create one
This is not used by selftest runs but I use it when I want to test a
specific test. Most useful when developing new code and/or tests.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939722675.15176.6294210959489131688.stgit@john-Precision-5820-Tower
The prints in the test_sockmap programs were only useful when we
didn't have enough control over test infrastructure to know from
user program what was being pushed into kernel side.
Now that we have or will shortly have better test controls lets
remove the printers. This means we can remove half the programs
and cleanup bpf side.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939720756.15176.9806965887313279429.stgit@john-Precision-5820-Tower
There is a much higher chance we can see the regressions if the
test is part of test_progs.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200515194904.229296-2-sdf@google.com
Commit 294f2fc6da ("bpf: Verifer, adjust_scalar_min_max_vals to always
call update_reg_bounds()") changed the way verifier logs some of its state,
adjust the test_align accordingly. Where possible, I tried to not copy-paste
the entire log line and resorted to dropping the last closing brace instead.
Fixes: 294f2fc6da ("bpf: Verifer, adjust_scalar_min_max_vals to always call update_reg_bounds()")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200515194904.229296-1-sdf@google.com
Fixes the following warnings:
hashmap.c: In function ‘hashmap__clear’:
hashmap.h:150:20: error: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare]
150 | for (bkt = 0; bkt < map->cap; bkt++) \
hashmap.c: In function ‘hashmap_grow’:
hashmap.h:150:20: error: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare]
150 | for (bkt = 0; bkt < map->cap; bkt++) \
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200515165007.217120-4-irogers@google.com
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix sk_psock reference count leak on receive, from Xiyu Yang.
2) CONFIG_HNS should be invisible, from Geert Uytterhoeven.
3) Don't allow locking route MTUs in ipv6, RFCs actually forbid this,
from Maciej Żenczykowski.
4) ipv4 route redirect backoff wasn't actually enforced, from Paolo
Abeni.
5) Fix netprio cgroup v2 leak, from Zefan Li.
6) Fix infinite loop on rmmod in conntrack, from Florian Westphal.
7) Fix tcp SO_RCVLOWAT hangs, from Eric Dumazet.
8) Various bpf probe handling fixes, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
selftests: mptcp: pm: rm the right tmp file
dpaa2-eth: properly handle buffer size restrictions
bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier
bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range
bpf: Restrict bpf_probe_read{, str}() only to archs where they work
MAINTAINERS: Mark networking drivers as Maintained.
ipmr: Add lockdep expression to ipmr_for_each_table macro
ipmr: Fix RCU list debugging warning
drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c
net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810
tcp: fix error recovery in tcp_zerocopy_receive()
MAINTAINERS: Add Jakub to networking drivers.
MAINTAINERS: another add of Karsten Graul for S390 networking
drivers: ipa: fix typos for ipa_smp2p structure doc
pppoe: only process PADT targeted at local interfaces
selftests/bpf: Enforce returning 0 for fentry/fexit programs
bpf: Enforce returning 0 for fentry/fexit progs
net: stmmac: fix num_por initialization
security: Fix the default value of secid_to_secctx hook
libbpf: Fix register naming in PT_REGS s390 macros
...
This Kselftest update for Linux 5.7-rc6 consists of
- lkdtm runner fixes to prevent dmesg clearing and shellcheck errors
- ftrace test handling when test module doesn't exist
- nsfs test fix to replace zero-length array with flexible-array
- dmabuf-heaps test fix to return clear error value
-----BEGIN PGP SIGNATURE-----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=2cqI
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- lkdtm runner fixes to prevent dmesg clearing and shellcheck errors
- ftrace test handling when test module doesn't exist
- nsfs test fix to replace zero-length array with flexible-array
- dmabuf-heaps test fix to return clear error value
* tag 'linux-kselftest-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/lkdtm: Use grep -E instead of egrep
selftests/lkdtm: Don't clear dmesg when running tests
selftests/ftrace: mark irqsoff_tracer.tc test as unresolved if the test module does not exist
tools/testing: Replace zero-length array with flexible-array
kselftests: dmabuf-heaps: Fix confused return value on expected error testing
Alexei Starovoitov says:
====================
pull-request: bpf 2020-05-15
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 2 day(s) which contain
a total of 14 files changed, 137 insertions(+), 43 deletions(-).
The main changes are:
1) Fix secid_to_secctx LSM hook default value, from Anders.
2) Fix bug in mmap of bpf array, from Andrii.
3) Restrict bpf_probe_read to archs where they work, from Daniel.
4) Enforce returning 0 for fentry/fexit progs, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-05-15
The following pull-request contains BPF updates for your *net-next* tree.
We've added 37 non-merge commits during the last 1 day(s) which contain
a total of 67 files changed, 741 insertions(+), 252 deletions(-).
The main changes are:
1) bpf_xdp_adjust_tail() now allows to grow the tail as well, from Jesper.
2) bpftool can probe CONFIG_HZ, from Daniel.
3) CAP_BPF is introduced to isolate user processes that use BPF infra and
to secure BPF networking services by dropping CAP_SYS_ADMIN requirement
in certain cases, from Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
"$err" is a variable pointing to a temp file. "$out" is not: only used
as a local variable in "check()" and representing the output of a
command line.
Fixes: eedbc68532 (selftests: add PM netlink functional tests)
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement two basic tests to verify terse dump functionality of flower
classifier:
- Test that verifies that terse dump works.
- Test that verifies that terse dump doesn't print filter key.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In Cilium we've recently switched to make use of bpf_jiffies64() for
parts of our tc and XDP datapath since bpf_ktime_get_ns() is more
expensive and high-precision is not needed for our timeouts we have
anyway. Our agent has a probe manager which picks up the json of
bpftool's feature probe and we also use the macro output in our C
programs e.g. to have workarounds when helpers are not available on
older kernels.
Extend the kernel config info dump to also include the kernel's
CONFIG_HZ, and rework the probe_kernel_image_config() for allowing a
macro dump such that CONFIG_HZ can be propagated to BPF C code as a
simple define if available via config. Latter allows to have _compile-
time_ resolution of jiffies <-> sec conversion in our code since all
are propagated as known constants.
Given we cannot generally assume availability of kconfig everywhere,
we also have a kernel hz probe [0] as a fallback. Potentially, bpftool
could have an integrated probe fallback as well, although to derive it,
we might need to place it under 'bpftool feature probe full' or similar
given it would slow down the probing process overall. Yet 'full' doesn't
fit either for us since we don't want to pollute the kernel log with
warning messages from bpf_probe_write_user() and bpf_trace_printk() on
agent startup; I've left it out for the time being.
[0] https://github.com/cilium/cilium/blob/master/bpf/cilium-probe-kernel-hz.c
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200513075849.20868-1-daniel@iogearbox.net
Instead of iterating through all instructions to find the last
instruction each time .rela.discard.(un)reachable points beyond the
section, use find_insn to locate the last instruction by looking at
the last bytes of the section instead.
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200421220843.188260-3-samitolvanen@google.com
Currently, objtool fails to load the correct section for symbols when
the index is greater than SHN_LORESERVE. Use gelf_getsymshndx instead
of gelf_getsym to handle >64k sections.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200421220843.188260-2-samitolvanen@google.com
Randy reported a false-positive:
arch/x86/hyperv/hv_apic.o: warning: objtool: hv_apic_write()+0x25: alternative modifies stack
What happens is that:
alternative_io("movl %0, %P1", "xchgl %0, %P1", X86_BUG_11AP,
13d: 89 9d 00 d0 7f ff mov %ebx,-0x803000(%rbp)
decodes to an instruction with CFI-ops because it modifies RBP.
However, due to this being a !frame-pointer build, that should not in
fact change the CFI state.
So instead of dis-allowing any CFI-op, verify the op would've actually
changed the CFI state.
Fixes: 7117f16bf4 ("objtool: Fix ORC vs alternatives")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Extend BPF selftest xdp_adjust_tail with grow tail tests, which is added
as subtest's. The first grow test stays in same form as original shrink
test. The second grow test use the newer bpf_prog_test_run_xattr() calls,
and does extra checking of data contents.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158945350567.97035.9632611946765811876.stgit@firesoul
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-05-14
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Merged tag 'perf-for-bpf-2020-05-06' from tip tree that includes CAP_PERFMON.
2) support for narrow loads in bpf_sock_addr progs and additional
helpers in cg-skb progs, from Andrey.
3) bpf benchmark runner, from Andrii.
4) arm and riscv JIT optimizations, from Luke.
5) bpf iterator infrastructure, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is based on the count_instructions test.
However this one also counts the number of failed stcx's, and in
conjunction with knowing the size of the stcx loop, can calculate the
total number of instructions executed even in the face of
non-deterministic stcx failures.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200426114410.3917383-1-mpe@ellerman.id.au
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200507185755.GA15014@embeddedor
It's not very nice to zero trap for this, because then system calls no
longer have trap_is_syscall(regs) invariant, and we can't distinguish
between sc and scv system calls (in a later patch).
Take one last unused bit from the low bits of the pt_regs.trap word
for this instead. There is not a really good reason why it should be
in trap as opposed to another field, but trap has some concept of
flags and it exists. Ideally I think we would move trap to 2-byte
field and have 2 more bytes available independently.
Add a selftests case for this, which can be seen to fail if
trap_norestart() is changed to return false.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Make them static inlines]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200507121332.2233629-4-mpe@ellerman.id.au
Test bpf_sk_lookup_tcp, bpf_sk_release, bpf_sk_cgroup_id and
bpf_sk_ancestor_cgroup_id helpers from cgroup skb program.
The test creates a testing cgroup, starts a TCPv6 server inside the
cgroup and creates two client sockets: one inside testing cgroup and one
outside.
Then it attaches cgroup skb program to the cgroup that checks all TCP
segments coming to the server and allows only those coming from the
cgroup of the server. If a segment comes from a peer outside of the
cgroup, it'll be dropped.
Finally the test checks that client from inside testing cgroup can
successfully connect to the server, but client outside the cgroup fails
to connect by timeout.
The main goal of the test is to check newly introduced
bpf_sk_{,ancestor_}cgroup_id helpers.
It also checks a couple of socket lookup helpers (tcp & release), but
lookup helpers were introduced much earlier and covered by other tests.
Here it's mostly checked that they can be called from cgroup skb.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/171f4c5d75e8ff4fe1c4e8c1c12288b5240a4549.1589486450.git.rdna@fb.com
Add two new network helpers.
connect_fd_to_fd connects an already created client socket fd to address
of server fd. Sometimes it's useful to separate client socket creation
and connecting this socket to a server, e.g. if client socket has to be
created in a cgroup different from that of server cgroup.
Additionally connect_to_fd is now implemented using connect_fd_to_fd,
both helpers don't treat EINPROGRESS as an error and let caller decide
how to proceed with it.
connect_wait is a helper to work with non-blocking client sockets so
that if connect_to_fd or connect_fd_to_fd returned -1 with errno ==
EINPROGRESS, caller can wait for connect to finish or for connection
timeout. The helper returns -1 on error, 0 on timeout (1sec,
hard-coded), and positive number on success.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/1403fab72300f379ca97ead4820ae43eac4414ef.1589486450.git.rdna@fb.com
With having ability to lookup sockets in cgroup skb programs it becomes
useful to access cgroup id of retrieved sockets so that policies can be
implemented based on origin cgroup of such socket.
For example, a container running in a cgroup can have cgroup skb ingress
program that can lookup peer socket that is sending packets to a process
inside the container and decide whether those packets should be allowed
or denied based on cgroup id of the peer.
More specifically such ingress program can implement intra-host policy
"allow incoming packets only from this same container and not from any
other container on same host" w/o relying on source IP addresses since
quite often it can be the case that containers share same IP address on
the host.
Introduce two new helpers for this use-case: bpf_sk_cgroup_id() and
bpf_sk_ancestor_cgroup_id().
These helpers are similar to existing bpf_skb_{,ancestor_}cgroup_id
helpers with the only difference that sk is used to get cgroup id
instead of skb, and share code with them.
See documentation in UAPI for more details.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/f5884981249ce911f63e9b57ecd5d7d19154ff39.1589486450.git.rdna@fb.com
bpf_sock_addr.user_port supports only 4-byte load and it leads to ugly
code in BPF programs, like:
volatile __u32 user_port = ctx->user_port;
__u16 port = bpf_ntohs(user_port);
Since otherwise clang may optimize the load to be 2-byte and it's
rejected by verifier.
Add support for 1- and 2-byte loads same way as it's supported for other
fields in bpf_sock_addr like user_ip4, msg_src_ip4, etc.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/c1e983f4c17573032601d0b2b1f9d1274f24bc16.1589420814.git.rdna@fb.com
Clean up after recent fixes, move address calculations
around and change the variable init, so that we can have
just one start_offset == end_offset check.
Make the check a little stricter to preserve the -EINVAL
error if requested start offset is larger than the region
itself.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few fentry/fexit programs returning non-0.
The tests with these programs will break with the previous
patch which enfoced return-0 rules. Fix them properly.
Fixes: ac065870d9 ("selftests/bpf: Add BPF_PROG, BPF_KPROBE, and BPF_KRETPROBE macros")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200514053207.1298479-1-yhs@fb.com
Flower tests used to create ingress filter with specified parent qdisc
"parent ffff:" but dump them on "ingress". With recent commit that fixed
tcm_parent handling in dump those are not considered same parent anymore,
which causes iproute2 tc to emit additional "parent ffff:" in first line of
filter dump output. The change in output causes filter match in tests to
fail.
Prevent parent qdisc output when dumping filters in flower tests by always
correctly specifying "ingress" parent both when creating and dumping
filters.
Fixes: a7df4870d7 ("net_sched: fix tcm_parent in tc filter dump")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mmap() subsystem allows user-space application to memory-map region with
initial page offset. This wasn't taken into account in initial implementation
of BPF array memory-mapping. This would result in wrong pages, not taking into
account requested page shift, being memory-mmaped into user-space. This patch
fixes this gap and adds a test for such scenario.
Fixes: fc9702273e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512235925.3817805-1-andriin@fb.com
Constants of the *_ALL type can be actively harmful due to the fact that
developers will usually fail to consider the possible effects of future
changes to the definition.
Deprecate STATX_ALL in the uapi, while no damage has been done yet.
We could keep something like this around in the kernel, but there's
actually no point, since all filesystems should be explicitly checking
flags that they support and not rely on the VFS masking unknown ones out: a
flag could be known to the VFS, yet not known to the filesystem.
Cc: David Howells <dhowells@redhat.com>
Cc: linux-api@vger.kernel.org
Cc: linux-man@vger.kernel.org
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This is to be consistent with tracing and lsm programs
which have prefix "bpf_trace_" and "bpf_lsm_" respectively.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200513180216.2949387-1-yhs@fb.com
Commit 6879c042e1 ("tools/bpf: selftests: Add bpf_iter selftests")
added self tests for bpf_iter feature. But two subtests
ipv6_route and netlink needs llvm latest 10.x release branch
or trunk due to a bug in llvm BPF backend. This patch added
the file README.rst to document these two failures
so people using llvm 10.0.0 can be aware of them.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200513180215.2949237-1-yhs@fb.com
It is sometimes desirable to be able to trigger BPF program from user-space
with minimal overhead. sys_enter would seem to be a good candidate, yet in
a lot of cases there will be a lot of noise from syscalls triggered by other
processes on the system. So while searching for low-overhead alternative, I've
stumbled upon getpgid() syscall, which seems to be specific enough to not
suffer from accidental syscall by other apps.
This set of benchmarks compares tp, raw_tp w/ filtering by syscall ID, kprobe,
fentry and fmod_ret with returning error (so that syscall would not be
executed), to determine the lowest-overhead way. Here are results on my
machine (using benchs/run_bench_trigger.sh script):
base : 9.200 ± 0.319M/s
tp : 6.690 ± 0.125M/s
rawtp : 8.571 ± 0.214M/s
kprobe : 6.431 ± 0.048M/s
fentry : 8.955 ± 0.241M/s
fmodret : 8.903 ± 0.135M/s
So it seems like fmodret doesn't give much benefit for such lightweight
syscall. Raw tracepoint is pretty decent despite additional filtering logic,
but it will be called for any other syscall in the system, which rules it out.
Fentry, though, seems to be adding the least amoung of overhead and achieves
97.3% of performance of baseline no-BPF-attached syscall.
Using getpgid() seems to be preferable to set_task_comm() approach from
test_overhead, as it's about 2.35x faster in a baseline performance.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512192445.2351848-5-andriin@fb.com
Add fmod_ret BPF program to existing test_overhead selftest. Also re-implement
user-space benchmarking part into benchmark runner to compare results. Results
with ./bench are consistently somewhat lower than test_overhead's, but relative
performance of various types of BPF programs stay consisten (e.g., kretprobe is
noticeably slower). This slowdown seems to be coming from the fact that
test_overhead is single-threaded, while benchmark always spins off at least
one thread for producer. This has been confirmed by hacking multi-threaded
test_overhead variant and also single-threaded bench variant. Resutls are
below. run_bench_rename.sh script from benchs/ subdirectory was used to
produce results for ./bench.
Single-threaded implementations
===============================
/* bench: single-threaded, atomics */
base : 4.622 ± 0.049M/s
kprobe : 3.673 ± 0.052M/s
kretprobe : 2.625 ± 0.052M/s
rawtp : 4.369 ± 0.089M/s
fentry : 4.201 ± 0.558M/s
fexit : 4.309 ± 0.148M/s
fmodret : 4.314 ± 0.203M/s
/* selftest: single-threaded, no atomics */
task_rename base 4555K events per sec
task_rename kprobe 3643K events per sec
task_rename kretprobe 2506K events per sec
task_rename raw_tp 4303K events per sec
task_rename fentry 4307K events per sec
task_rename fexit 4010K events per sec
task_rename fmod_ret 3984K events per sec
Multi-threaded implementations
==============================
/* bench: multi-threaded w/ atomics */
base : 3.910 ± 0.023M/s
kprobe : 3.048 ± 0.037M/s
kretprobe : 2.300 ± 0.015M/s
rawtp : 3.687 ± 0.034M/s
fentry : 3.740 ± 0.087M/s
fexit : 3.510 ± 0.009M/s
fmodret : 3.485 ± 0.050M/s
/* selftest: multi-threaded w/ atomics */
task_rename base 3872K events per sec
task_rename kprobe 3068K events per sec
task_rename kretprobe 2350K events per sec
task_rename raw_tp 3731K events per sec
task_rename fentry 3639K events per sec
task_rename fexit 3558K events per sec
task_rename fmod_ret 3511K events per sec
/* selftest: multi-threaded, no atomics */
task_rename base 3945K events per sec
task_rename kprobe 3298K events per sec
task_rename kretprobe 2451K events per sec
task_rename raw_tp 3718K events per sec
task_rename fentry 3782K events per sec
task_rename fexit 3543K events per sec
task_rename fmod_ret 3526K events per sec
Note that the fact that ./bench benchmark always uses atomic increments for
counting, while test_overhead doesn't, doesn't influence test results all that
much.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512192445.2351848-4-andriin@fb.com
While working on BPF ringbuf implementation, testing, and benchmarking, I've
developed a pretty generic and modular benchmark runner, which seems to be
generically useful, as I've already used it for one more purpose (testing
fastest way to trigger BPF program, to minimize overhead of in-kernel code).
This patch adds generic part of benchmark runner and sets up Makefile for
extending it with more sets of benchmarks.
Benchmarker itself operates by spinning up specified number of producer and
consumer threads, setting up interval timer sending SIGALARM signal to
application once a second. Every second, current snapshot with hits/drops
counters are collected and stored in an array. Drops are useful for
producer/consumer benchmarks in which producer might overwhelm consumers.
Once test finishes after given amount of warm-up and testing seconds, mean and
stddev are calculated (ignoring warm-up results) and is printed out to stdout.
This setup seems to give consistent and accurate results.
To validate behavior, I added two atomic counting tests: global and local.
For global one, all the producer threads are atomically incrementing same
counter as fast as possible. This, of course, leads to huge drop of
performance once there is more than one producer thread due to CPUs fighting
for the same memory location.
Local counting, on the other hand, maintains one counter per each producer
thread, incremented independently. Once per second, all counters are read and
added together to form final "counting throughput" measurement. As expected,
such setup demonstrates linear scalability with number of producers (as long
as there are enough physical CPU cores, of course). See example output below.
Also, this setup can nicely demonstrate disastrous effects of false sharing,
if care is not taken to take those per-producer counters apart into
independent cache lines.
Demo output shows global counter first with 1 producer, then with 4. Both
total and per-producer performance significantly drop. The last run is local
counter with 4 producers, demonstrating near-perfect scalability.
$ ./bench -a -w1 -d2 -p1 count-global
Setting up benchmark 'count-global'...
Benchmark 'count-global' started.
Iter 0 ( 24.822us): hits 148.179M/s (148.179M/prod), drops 0.000M/s
Iter 1 ( 37.939us): hits 149.308M/s (149.308M/prod), drops 0.000M/s
Iter 2 (-10.774us): hits 150.717M/s (150.717M/prod), drops 0.000M/s
Iter 3 ( 3.807us): hits 151.435M/s (151.435M/prod), drops 0.000M/s
Summary: hits 150.488 ± 1.079M/s (150.488M/prod), drops 0.000 ± 0.000M/s
$ ./bench -a -w1 -d2 -p4 count-global
Setting up benchmark 'count-global'...
Benchmark 'count-global' started.
Iter 0 ( 60.659us): hits 53.910M/s ( 13.477M/prod), drops 0.000M/s
Iter 1 (-17.658us): hits 53.722M/s ( 13.431M/prod), drops 0.000M/s
Iter 2 ( 5.865us): hits 53.495M/s ( 13.374M/prod), drops 0.000M/s
Iter 3 ( 0.104us): hits 53.606M/s ( 13.402M/prod), drops 0.000M/s
Summary: hits 53.608 ± 0.113M/s ( 13.402M/prod), drops 0.000 ± 0.000M/s
$ ./bench -a -w1 -d2 -p4 count-local
Setting up benchmark 'count-local'...
Benchmark 'count-local' started.
Iter 0 ( 23.388us): hits 640.450M/s (160.113M/prod), drops 0.000M/s
Iter 1 ( 2.291us): hits 605.661M/s (151.415M/prod), drops 0.000M/s
Iter 2 ( -6.415us): hits 607.092M/s (151.773M/prod), drops 0.000M/s
Iter 3 ( -1.361us): hits 601.796M/s (150.449M/prod), drops 0.000M/s
Summary: hits 604.849 ± 2.739M/s (151.212M/prod), drops 0.000 ± 0.000M/s
Benchmark runner supports setting thread affinity for producer and consumer
threads. You can use -a flag for default CPU selection scheme, where first
consumer gets CPU #0, next one gets CPU #1, and so on. Then producer threads
pick up next CPU and increment one-by-one as well. But user can also specify
a set of CPUs independently for producers and consumers with --prod-affinity
1,2-10,15 and --cons-affinity <set-of-cpus>. The latter allows to force
producers and consumers to share same set of CPUs, if necessary.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512192445.2351848-3-andriin@fb.com
Add testing_helpers.c, which will contain generic helpers for test runners and
tests needing some common generic functionality, like parsing a set of
numbers.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200512192445.2351848-2-andriin@fb.com
This is basically a test-suite for setns() and as of now contains:
- test that we can't pass garbage flags
- test that we can't attach to the namespaces of task that has already exited
- test that we can incrementally setns into all namespaces of a target task
using a pidfd
- test that we can setns atomically into all namespaces of a target task
- test that we can't cross setns into a user namespace outside of our user
namespace hierarchy
- test that we can't setns into namespaces owned by user namespaces over which
we are not privileged
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200505140432.181565-4-christian.brauner@ubuntu.com
When the probe code was failing for any reason ENOTSUP was returned, even
if this was due to not having enough lock space. This patch fixes this by
returning EPERM to the user application, so it can respond and increase
the RLIMIT_MEMLOCK size.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/158927424896.2342.10402475603585742943.stgit@ebuild
Before commit 74b5a5968f ("selftests/bpf: Replace test_progs and
test_maps w/ general rule") selftests/bpf used generic install
target from selftests/lib.mk to install generated bpf test progs
by mentioning them in TEST_GEN_FILES variable.
Take that functionality back.
Fixes: 74b5a5968f ("selftests/bpf: Replace test_progs and test_maps w/ general rule")
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200513021722.7787-1-yauheni.kaliuta@redhat.com
Unfortunately, the last set of fixes introduced some minor bugs:
- The bootconfig apply_xbc() leak fix caused the application to return
a positive number on success, when it should have returned zero.
- The preempt_irq_delay_thread fix to make the creation code
wait for the kthread to finish to prevent it from executing after
module unload, can now cause the kthread to exit before it even
executes (preventing it to run its tests).
- The fix to the bootconfig that fixed the initrd to remove the
bootconfig from causing the kernel to panic, now prints a warning
that the bootconfig is not found, even when bootconfig is not
on the command line.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXrq2ehQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrdjAQDGNaJa7Ft13KTDTNTioKmOorOi38vF
ava4E3uBHl3StQD/anJmVq7Kk4WJFKGYemV6usbjDqy510PCFu/VQ1AbGQc=
=hJvk
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Fixes to previous fixes.
Unfortunately, the last set of fixes introduced some minor bugs:
- The bootconfig apply_xbc() leak fix caused the application to
return a positive number on success, when it should have returned
zero.
- The preempt_irq_delay_thread fix to make the creation code wait for
the kthread to finish to prevent it from executing after module
unload, can now cause the kthread to exit before it even executes
(preventing it to run its tests).
- The fix to the bootconfig that fixed the initrd to remove the
bootconfig from causing the kernel to panic, now prints a warning
that the bootconfig is not found, even when bootconfig is not on
the command line"
* tag 'trace-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: Fix to prevent warning message if no bootconfig option
tracing: Wait for preempt irq delay thread to execute
tools/bootconfig: Fix apply_xbc() to return zero on success
Add new subcommands to kunit.py to allow stages of the existing 'run'
subcommand to be run independently:
- 'config': Verifies that .config is a subset of .kunitconfig
- 'build': Compiles a UML kernel for KUnit
- 'exec': Runs the kernel, and outputs the test results.
- 'parse': Parses test results from a file or stdin
The 'run' command continues to behave as before.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The return of apply_xbc() returns the result of the last write() call, which
is not what is expected. It should only return zero on success.
Link: https://lore.kernel.org/r/20200508093059.GF9365@kadam
Fixes: 8842604446 ("tools/bootconfig: Fix resource leak in apply_xbc()")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Synchronise the bpf.h header under tools, to report the fixes recently
brought to the documentation for the BPF helpers.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200511161536.29853-5-quentin@isovalent.com
Bring minor improvements to bpftool documentation. Fix or harmonise
formatting, update map types (including in interactive help), improve
description for "map create", fix a build warning due to a missing line
after the double-colon for the "bpftool prog profile" example,
complete/harmonise/sort the list of related bpftool man pages in
footers.
v2:
- Remove (instead of changing) mark-up on "value" in bpftool-map.rst,
when it does not refer to something passed on the command line.
- Fix an additional typo ("hexadeximal") in the same file.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200511161536.29853-3-quentin@isovalent.com
Replace the use of kernel-only integer typedefs (u8, u32, etc.) by their
user space counterpart (__u8, __u32, etc.).
Similarly to what libbpf does, poison the typedefs to avoid introducing
them again in the future.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200511161536.29853-2-quentin@isovalent.com
turbo-freq enable, requires clos enable. So this is a two step process,
when "-a" option is used. This is causing confusion to users. So enable
clos by default for turbo-freq enable.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
On CLX-N, the perf-profile-level's output is terminated before the
speed-select-base-freq-properties are output which results in a corrupt
json file.
Adjust the output of speed-select-base-freq-properties by one on CLX-N.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
On CLX-N the perf-profile output is missing the package, die, and cpu
output. On CLX-N the pkg_dev struct will never be evaluated by the core
code so pkg_dev.processed is always 0 and the package, die, and cpu
information is never output.
Set the pkg_dev.processed flag to 1 for CLX-N processors.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: andriy.shevchenko@linux.intel.com
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
When turbo-freq or base-freq feature is not supported, the enable will
fail. So first check support status and print error.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
When turbo-freq is enabled, we can't disable core-power. Currently
it prints debug message to warn. Change this to error message.
While here remove "\n" from calls to isst_display_error_info_message(),
as it will be added again during actual print.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200507185057.GA13981@embeddedor
- Ensure that direct mapping alias is always flushed when changing page
attributes. The optimization for small ranges failed to do so when
the virtual address was in the vmalloc or module space.
- Unbreak the trace event registration for syscalls without arguments
caused by the refactoring of the SYSCALL_DEFINE0() macro.
- Move the printk in the TSC deadline timer code to a place where it is
guaranteed to only be called once during boot and cannot be rearmed by
clearing warn_once after boot. If it's invoked post boot then lockdep
rightfully complains about a potential deadlock as the calling context
is different.
- A series of fixes for objtool and the ORC unwinder addressing variety
of small issues:
Stack offset tracking for indirect CFAs in objtool ignored subsequent
pushs and pops
Repair the unwind hints in the register clearing entry ASM code
Make the unwinding in the low level exit to usermode code stop after
switching to the trampoline stack. The unwind hint is not longer valid
and the ORC unwinder emits a warning as it can't find the registers
anymore.
Fix the unwind hints in switch_to_asm() and rewind_stack_do_exit()
which caused objtool to generate bogus ORC data.
Prevent unwinder warnings when dumping the stack of a non-current
task as there is no way to be sure about the validity because the
dumped stack can be a moving target.
Make the ORC unwinder behave the same way as the frame pointer
unwinder when dumping an inactive tasks stack and do not skip the
first frame.
Prevent ORC unwinding before ORC data has been initialized
Immediately terminate unwinding when a unknown ORC entry type is
found.
Prevent premature stop of the unwinder caused by IRET frames.
Fix another infinite loop in objtool caused by a negative offset which
was not catched.
Address a few build warnings in the ORC unwinder and add missing
static/ro_after_init annotations
-----BEGIN PGP SIGNATURE-----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=0rCi
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Ensure that direct mapping alias is always flushed when changing
page attributes. The optimization for small ranges failed to do so
when the virtual address was in the vmalloc or module space.
- Unbreak the trace event registration for syscalls without arguments
caused by the refactoring of the SYSCALL_DEFINE0() macro.
- Move the printk in the TSC deadline timer code to a place where it
is guaranteed to only be called once during boot and cannot be
rearmed by clearing warn_once after boot. If it's invoked post boot
then lockdep rightfully complains about a potential deadlock as the
calling context is different.
- A series of fixes for objtool and the ORC unwinder addressing
variety of small issues:
- Stack offset tracking for indirect CFAs in objtool ignored
subsequent pushs and pops
- Repair the unwind hints in the register clearing entry ASM code
- Make the unwinding in the low level exit to usermode code stop
after switching to the trampoline stack. The unwind hint is no
longer valid and the ORC unwinder emits a warning as it can't
find the registers anymore.
- Fix unwind hints in switch_to_asm() and rewind_stack_do_exit()
which caused objtool to generate bogus ORC data.
- Prevent unwinder warnings when dumping the stack of a
non-current task as there is no way to be sure about the
validity because the dumped stack can be a moving target.
- Make the ORC unwinder behave the same way as the frame pointer
unwinder when dumping an inactive tasks stack and do not skip
the first frame.
- Prevent ORC unwinding before ORC data has been initialized
- Immediately terminate unwinding when a unknown ORC entry type
is found.
- Prevent premature stop of the unwinder caused by IRET frames.
- Fix another infinite loop in objtool caused by a negative
offset which was not catched.
- Address a few build warnings in the ORC unwinder and add
missing static/ro_after_init annotations"
* tag 'x86-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Move ORC sorting variables under !CONFIG_MODULES
x86/apic: Move TSC deadline timer debug printk
ftrace/x86: Fix trace event registration for syscalls without arguments
x86/mm/cpa: Flush direct map alias during cpa
objtool: Fix infinite loop in for_offset_range()
x86/unwind/orc: Fix premature unwind stoppage due to IRET frames
x86/unwind/orc: Fix error path for bad ORC entry type
x86/unwind/orc: Prevent unwinding before ORC initialization
x86/unwind/orc: Don't skip the first frame for inactive tasks
x86/unwind: Prevent false warnings for non-current tasks
x86/unwind/orc: Convert global variables to static
x86/entry/64: Fix unwind hints in rewind_stack_do_exit()
x86/entry/64: Fix unwind hints in __switch_to_asm()
x86/entry/64: Fix unwind hints in kernel exit path
x86/entry/64: Fix unwind hints in register clearing code
objtool: Fix stack offset tracking for indirect CFAs
search which can be triggered when building the kernel with
-ffunction-sections.
-----BEGIN PGP SIGNATURE-----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=0+2v
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Thomas Gleixner:
"A single fix for objtool to prevent an infinite loop in the
jump table search which can be triggered when building the
kernel with '-ffunction-sections'"
* tag 'objtool-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix infinite loop in find_jump_table()
-----BEGIN PGP SIGNATURE-----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=73nU
-----END PGP SIGNATURE-----
Merge tag 'block-5.7-2020-05-09' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- a small series fixing a use-after-free of bdi name (Christoph,Yufen)
- NVMe fix for a regression with the smaller CQ update (Alexey)
- NVMe fix for a hang at namespace scanning error recovery (Sagi)
- fix race with blk-iocost iocg->abs_vdebt updates (Tejun)
* tag 'block-5.7-2020-05-09' of git://git.kernel.dk/linux-block:
nvme: fix possible hang when ns scanning fails during error recovery
nvme-pci: fix "slimmer CQ head update"
bdi: add a ->dev_name field to struct backing_dev_info
bdi: use bdi_dev_name() to get device name
bdi: move bdi_dev_name out of line
vboxsf: don't use the source name in the bdi name
iocost: protect iocg->abs_vdebt with iocg->waitq.lock
runqslower doesn't specify include path for uapi/bpf.h. This causes the
following warning:
In file included from runqslower.c:10:
.../tools/testing/selftests/bpf/tools/include/bpf/bpf.h:234:38:
warning: 'enum bpf_stats_type' declared inside parameter list will not
be visible outside of this definition or declaration
234 | LIBBPF_API int bpf_enable_stats(enum bpf_stats_type type);
Fix this by adding -I tools/includ/uapi to the Makefile.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The added test includes the following subtests:
- test verifier change for btf_id_or_null
- test load/create_iter/read for
ipv6_route/netlink/bpf_map/task/task_file
- test anon bpf iterator
- test anon bpf iterator reading one char at a time
- test file bpf iterator
- test overflow (single bpf program output not overflow)
- test overflow (single bpf program output overflows)
- test bpf prog returning 1
The ipv6_route tests the following verifier change
- access fields in the variable length array of the structure.
The netlink load tests the following verifier change
- put a btf_id ptr value in a stack and accessible to
tracing/iter programs.
The anon bpf iterator also tests link auto attach through skeleton.
$ test_progs -n 2
#2/1 btf_id_or_null:OK
#2/2 ipv6_route:OK
#2/3 netlink:OK
#2/4 bpf_map:OK
#2/5 task:OK
#2/6 task_file:OK
#2/7 anon:OK
#2/8 anon-read-one-char:OK
#2/9 file:OK
#2/10 overflow:OK
#2/11 overflow-e2big:OK
#2/12 prog-ret-1:OK
#2 bpf_iter:OK
Summary: 1/12 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175923.2477637-1-yhs@fb.com
The implementation is arbitrary, just to show how the bpf programs
can be written for bpf_map/task/task_file. They can be costomized
for specific needs.
For example, for bpf_map, the iterator prints out:
$ cat /sys/fs/bpf/my_bpf_map
id refcnt usercnt locked_vm
3 2 0 20
6 2 0 20
9 2 0 20
12 2 0 20
13 2 0 20
16 2 0 20
19 2 0 20
%%% END %%%
For task, the iterator prints out:
$ cat /sys/fs/bpf/my_task
tgid gid
1 1
2 2
....
1944 1944
1948 1948
1949 1949
1953 1953
=== END ===
For task/file, the iterator prints out:
$ cat /sys/fs/bpf/my_task_file
tgid gid fd file
1 1 0 ffffffff95c97600
1 1 1 ffffffff95c97600
1 1 2 ffffffff95c97600
....
1895 1895 255 ffffffff95c8fe00
1932 1932 0 ffffffff95c8fe00
1932 1932 1 ffffffff95c8fe00
1932 1932 2 ffffffff95c8fe00
1932 1932 3 ffffffff95c185c0
This is able to print out all open files (fd and file->f_op), so user can compare
f_op against a particular kernel file operations to find what it is.
For example, from /proc/kallsyms, we can find
ffffffff95c185c0 r eventfd_fops
so we will know tgid 1932 fd 3 is an eventfd file descriptor.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175922.2477576-1-yhs@fb.com
Currently, only one command is supported
bpftool iter pin <bpf_prog.o> <path>
It will pin the trace/iter bpf program in
the object file <bpf_prog.o> to the <path>
where <path> should be on a bpffs mount.
For example,
$ bpftool iter pin ./bpf_iter_ipv6_route.o \
/sys/fs/bpf/my_route
User can then do a `cat` to print out the results:
$ cat /sys/fs/bpf/my_route
fe800000000000000000000000000000 40 00000000000000000000000000000000 ...
00000000000000000000000000000000 00 00000000000000000000000000000000 ...
00000000000000000000000000000001 80 00000000000000000000000000000000 ...
fe800000000000008c0162fffebdfd57 80 00000000000000000000000000000000 ...
ff000000000000000000000000000000 08 00000000000000000000000000000000 ...
00000000000000000000000000000000 00 00000000000000000000000000000000 ...
The implementation for ipv6_route iterator is in one of subsequent
patches.
This patch also added BPF_LINK_TYPE_ITER to link query.
In the future, we may add additional parameters to pin command
by parameterizing the bpf iterator. For example, a map_id or pid
may be added to let bpf program only traverses a single map or task,
similar to kernel seq_file single_open().
We may also add introspection command for targets/iterators by
leveraging the bpf_iter itself.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200509175920.2477247-1-yhs@fb.com
These two helpers will be used later in bpf_iter bpf program
bpf_iter_netlink.c. Put them in bpf_helpers.h since they could
be useful in other cases.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175919.2477104-1-yhs@fb.com
Two new libbpf APIs are added to support bpf_iter:
- bpf_program__attach_iter
Given a bpf program and additional parameters, which is
none now, returns a bpf_link.
- bpf_iter_create
syscall level API to create a bpf iterator.
The macro BPF_SEQ_PRINTF are also introduced. The format
looks like:
BPF_SEQ_PRINTF(seq, "task id %d\n", pid);
This macro can help bpf program writers with
nicer bpf_seq_printf syntax similar to the kernel one.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175917.2476936-1-yhs@fb.com
Two helpers bpf_seq_printf and bpf_seq_write, are added for
writing data to the seq_file buffer.
bpf_seq_printf supports common format string flag/width/type
fields so at least I can get identical results for
netlink and ipv6_route targets.
For bpf_seq_printf and bpf_seq_write, return value -EOVERFLOW
specifically indicates a write failure due to overflow, which
means the object will be repeated in the next bpf invocation
if object collection stays the same. Note that if the object
collection is changed, depending how collection traversal is
done, even if the object still in the collection, it may not
be visited.
For bpf_seq_printf, format %s, %p{i,I}{4,6} needs to
read kernel memory. Reading kernel memory may fail in
the following two cases:
- invalid kernel address, or
- valid kernel address but requiring a major fault
If reading kernel memory failed, the %s string will be
an empty string and %p{i,I}{4,6} will be all 0.
Not returning error to bpf program is consistent with
what bpf_trace_printk() does for now.
bpf_seq_printf may return -EBUSY meaning that internal percpu
buffer for memory copy of strings or other pointees is
not available. Bpf program can return 1 to indicate it
wants the same object to be repeated. Right now, this should not
happen on no-RT kernels since migrate_disable(), which guards
bpf prog call, calls preempt_disable().
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175914.2476661-1-yhs@fb.com
A new bpf command BPF_ITER_CREATE is added.
The anonymous bpf iterator is seq_file based.
The seq_file private data are referenced by targets.
The bpf_iter infrastructure allocated additional space
at seq_file->private before the space used by targets
to store some meta data, e.g.,
prog: prog to run
session_id: an unique id for each opened seq_file
seq_num: how many times bpf programs are queried in this session
done_stop: an internal state to decide whether bpf program
should be called in seq_ops->stop() or not
The seq_num will start from 0 for valid objects.
The bpf program may see the same seq_num more than once if
- seq_file buffer overflow happens and the same object
is retried by bpf_seq_read(), or
- the bpf program explicitly requests a retry of the
same object
Since module is not supported for bpf_iter, all target
registeration happens at __init time, so there is no
need to change bpf_iter_unreg_target() as it is used
mostly in error path of the init function at which time
no bpf iterators have been created yet.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175905.2475770-1-yhs@fb.com
Given a bpf program, the step to create an anonymous bpf iterator is:
- create a bpf_iter_link, which combines bpf program and the target.
In the future, there could be more information recorded in the link.
A link_fd will be returned to the user space.
- create an anonymous bpf iterator with the given link_fd.
The bpf_iter_link can be pinned to bpffs mount file system to
create a file based bpf iterator as well.
The benefit to use of bpf_iter_link:
- using bpf link simplifies design and implementation as bpf link
is used for other tracing bpf programs.
- for file based bpf iterator, bpf_iter_link provides a standard
way to replace underlying bpf programs.
- for both anonymous and free based iterators, bpf link query
capability can be leveraged.
The patch added support of tracing/iter programs for BPF_LINK_CREATE.
A new link type BPF_LINK_TYPE_ITER is added to facilitate link
querying. Currently, only prog_id is needed, so there is no
additional in-kernel show_fdinfo() and fill_link_info() hook
is needed for BPF_LINK_TYPE_ITER link.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175901.2475084-1-yhs@fb.com
A bpf_iter program is a tracing program with attach type
BPF_TRACE_ITER. The load attribute
attach_btf_id
is used by the verifier against a particular kernel function,
which represents a target, e.g., __bpf_iter__bpf_map
for target bpf_map which is implemented later.
The program return value must be 0 or 1 for now.
0 : successful, except potential seq_file buffer overflow
which is handled by seq_file reader.
1 : request to restart the same object
In the future, other return values may be used for filtering or
teminating the iterator.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175900.2474947-1-yhs@fb.com
Make sure that the drive restricts incorrect order of inserted matchall
vs. flower rules.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check that matchall rules with sample actions are not possible to be
inserted to egress.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The file is about to contain matchall restrictions too, so change the
name to make it more generic.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull in block-5.7 fixes for 5.8. Mostly to resolve a conflict with
the blk-iocost changes, but we also need the base of the bdi
use-after-free as well as we build on top of it.
* block-5.7:
nvme: fix possible hang when ns scanning fails during error recovery
nvme-pci: fix "slimmer CQ head update"
bdi: add a ->dev_name field to struct backing_dev_info
bdi: use bdi_dev_name() to get device name
bdi: move bdi_dev_name out of line
vboxsf: don't use the source name in the bdi name
iocost: protect iocg->abs_vdebt with iocg->waitq.lock
block: remove the bd_openers checks in blk_drop_partitions
nvme: prevent double free in nvme_alloc_ns() error handling
null_blk: Cleanup zoned device initialization
null_blk: Fix zoned command handling
block: remove unused header
blk-iocost: Fix error on iocost_ioc_vrate_adj
bdev: Reduce time holding bd_mutex in sync in blkdev_close()
buffer: remove useless comment and WB_REASON_FREE_MORE_MEM, reason.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We want to have a tighter control on what ports we bind to in
the BPF_CGROUP_INET{4,6}_CONNECT hooks even if it means
connect() becomes slightly more expensive. The expensive part
comes from the fact that we now need to call inet_csk_get_port()
that verifies that the port is not used and allocates an entry
in the hash table for it.
Since we can't rely on "snum || !bind_address_no_port" to prevent
us from calling POST_BIND hook anymore, let's add another bind flag
to indicate that the call site is BPF program.
v5:
* fix wrong AF_INET (should be AF_INET6) in the bpf program for v6
v3:
* More bpf_bind documentation refinements (Martin KaFai Lau)
* Add UDP tests as well (Martin KaFai Lau)
* Don't start the thread, just do socket+bind+listen (Martin KaFai Lau)
v2:
* Update documentation (Andrey Ignatov)
* Pass BIND_FORCE_ADDRESS_NO_PORT conditionally (Andrey Ignatov)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200508174611.228805-5-sdf@google.com
1. Move pkt_v4 and pkt_v6 into network_helpers and adjust the users.
2. Copy-paste spin_lock_thread into two tests that use it.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20200508174611.228805-3-sdf@google.com
Move the following routines that let us start a background listener
thread and connect to a server by fd to the test_prog:
* start_server - socket+bind+listen
* connect_to_fd - connect to the server identified by fd
These will be used in the next commit.
Also, extend these helpers to support AF_INET6 and accept the family
as an argument.
v5:
* drop pthread.h (Martin KaFai Lau)
* add SO_SNDTIMEO (Martin KaFai Lau)
v4:
* export extra helper to start server without a thread (Martin KaFai Lau)
* tcp_rtt is no longer starting background thread (Martin KaFai Lau)
v2:
* put helpers into network_helpers.c (Andrii Nakryiko)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200508174611.228805-2-sdf@google.com
shellcheck complains that egrep is deprecated, and the grep man page
agrees. Use grep -E instead.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It is Very Rude to clear dmesg in test scripts. That's because the
script may be part of a larger test run, and clearing dmesg
potentially destroys the output of other tests.
We can avoid using dmesg -c by saving the content of dmesg before the
test, and then using diff to compare that to the dmesg afterward,
producing a log with just the added lines.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The UNRESOLVED state is much more apporiate than the UNSUPPORTED state
for the absence of the test module, as it matches "test was set up
incorrectly" situation in the README file.
A possible scenario is that the function was enabled (supported by the
kernel) but the module was not installed properly, in this case we
cannot call this as UNSUPPORTED.
This change also make it consistent with other module-related tests
in ftrace.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Merge misc fixes from Andrew Morton:
"14 fixes and one selftest to verify the ipc fixes herein"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: limit boost_watermark on small zones
ubsan: disable UBSAN_ALIGNMENT under COMPILE_TEST
mm/vmscan: remove unnecessary argument description of isolate_lru_pages()
epoll: atomically remove wait entry on wake up
kselftests: introduce new epoll60 testcase for catching lost wakeups
percpu: make pcpu_alloc() aware of current gfp context
mm/slub: fix incorrect interpretation of s->offset
scripts/gdb: repair rb_first() and rb_last()
eventpoll: fix missing wakeup for ovflist in ep_poll_callback
arch/x86/kvm/svm/sev.c: change flag passed to GUP fast in sev_pin_memory()
scripts/decodecode: fix trapping instruction formatting
kernel/kcov.c: fix typos in kcov_remote_start documentation
mm/page_alloc: fix watchdog soft lockups during set_zone_contiguous()
mm, memcg: fix error return value of mem_cgroup_css_alloc()
ipc/mqueue.c: change __do_notify() to bypass check_kill_permission()
When I added the expected error testing, I forgot I need to set
the return to zero when we successfully see an error.
Without this change we only end up testing a single heap
before the test quits.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: "Andrew F. Davis" <afd@ti.com>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When KVM_EXIT_DEBUG is raised for the disabled-breakpoints case (DR7.GD),
DR6 was incorrectly copied from the value in the VM. Instead,
DR6.BD should be set in order to catch this case.
On AMD this does not need any special code because the processor triggers
a #DB exception that is intercepted. However, the testcase would fail
without the previous patch because both DR6.BS and DR6.BD would be set.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The documentation for UBSAN_ALIGNMENT already mentions that it should
not be used on all*config builds (and for efficient-unaligned-access
architectures), so just refactor the Kconfig to correctly implement this
so randconfigs will stop creating insane images that freak out objtool
under CONFIG_UBSAN_TRAP (due to the false positives producing functions
that never return, etc).
Link: http://lkml.kernel.org/r/202005011433.C42EA3E2D@keescook
Fixes: 0887a7ebc9 ("ubsan: add trap instrumentation option")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/linux-next/202004231224.D6B3B650@keescook/
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This test case catches lost wake up introduced by commit 339ddb53d3
("fs/epoll: remove unnecessary wakeups of nested epoll")
The test is simple: we have 10 threads and 10 event fds. Each thread
can harvest only 1 event. 1 producer fires all 10 events at once and
waits that all 10 events will be observed by 10 threads.
In case of lost wakeup epoll_wait() will timeout and 0 will be returned.
Test case catches two sort of problems: forgotten wakeup on event, which
hits the ->ovflist list, this problem was fixed by:
5a2513239750 ("eventpoll: fix missing wakeup for ovflist in ep_poll_callback")
the other problem is when several sequential events hit the same waiting
thread, thus other waiters get no wakeups. Problem is fixed in the
following patch.
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Khazhismel Kumykov <khazhy@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Heiher <r@hev.cc>
Cc: Jason Baron <jbaron@akamai.com>
Link: http://lkml.kernel.org/r/20200430130326.1368509-1-rpenyaev@suse.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix bootconfig causing kernels to fail with CONFIG_BLK_DEV_RAM enabled
- Fix allocation leaks in bootconfig tool
- Fix a double initialization of a variable
- Fix API bootconfig usage from kprobe boot time events
- Reject NULL location for kprobes
- Fix crash caused by preempt delay module not cleaning up kthread
correctly
- Add vmalloc_sync_mappings() to prevent x86_64 page faults from
recursively faulting from tracing page faults
- Fix comment in gpu/trace kerneldoc header
- Fix documentation of how to create a trace event class
- Make the local tracing_snapshot_instance_cond() function static
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXrRUBhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qveTAP4iNCnMeS/Isb+MXQx2Pnu7OP+0BeRP
2ahlKG2sBgEdnwEAoUzxQoYWtfC6xoM38YwLuZPRlcScRea/5CRHyW8BFQc=
=o3pV
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix bootconfig causing kernels to fail with CONFIG_BLK_DEV_RAM
enabled
- Fix allocation leaks in bootconfig tool
- Fix a double initialization of a variable
- Fix API bootconfig usage from kprobe boot time events
- Reject NULL location for kprobes
- Fix crash caused by preempt delay module not cleaning up kthread
correctly
- Add vmalloc_sync_mappings() to prevent x86_64 page faults from
recursively faulting from tracing page faults
- Fix comment in gpu/trace kerneldoc header
- Fix documentation of how to create a trace event class
- Make the local tracing_snapshot_instance_cond() function static
* tag 'trace-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tools/bootconfig: Fix resource leak in apply_xbc()
tracing: Make tracing_snapshot_instance_cond() static
tracing: Fix doc mistakes in trace sample
gpu/trace: Minor comment updates for gpu_mem_total tracepoint
tracing: Add a vmalloc_sync_mappings() for safe measure
tracing: Wait for preempt irq delay thread to finish
tracing/kprobes: Reject new event if loc is NULL
tracing/boottime: Fix kprobe event API usage
tracing/kprobes: Fix a double initialization typo
bootconfig: Fix to remove bootconfig data from initrd while boot
This Kselftest update for Linux 5.7-rc5 consists of ftrace test fixes
and fix to kvm Makefile for relocatable native/cross builds and installs.
-----BEGIN PGP SIGNATURE-----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=jUcW
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"ftrace test fixes and a fix to kvm Makefile for relocatable
native/cross builds and installs"
* tag 'linux-kselftest-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: fix kvm relocatable native/cross builds and installs
selftests/ftrace: Make XFAIL green color
ftrace/selftest: make unresolved cases cause failure if --fail-unresolved set
ftrace/selftests: workaround cgroup RT scheduling issues
Fix the @data and @fd allocations that are leaked in the error path of
apply_xbc().
Link: http://lkml.kernel.org/r/583a49c9-c27a-931d-e6c2-6f63a4b18bea@huawei.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
fixes.2020.04.27a: Miscellaneous fixes.
kfree_rcu.2020.04.27a: Changes related to kfree_rcu().
rcu-tasks.2020.04.27a: Addition of new RCU-tasks flavors.
stall.2020.04.27a: RCU CPU stall-warning updates.
torture.2020.05.07a: Torture-test updates.
Make it a bit easier to apply KASAN to rcutorture runs with a new --kasan
argument, again leveraging the config_override_param() bash function.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit saves a few lines of code by also using the bash
config_override_param() to set the initial list of Kconfig options from
the CFcommon file. While in the area, it makes this function capable of
update-in-place on the file containing the cumulative Kconfig options,
thus avoiding annoying changes when adding another source of options.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit applies config_override_param() to allow scenario-specific
Kconfig options to override those in CFcommon. This in turn will allow
additional Kconfig options to be placed in CFcommon, for example, an
option common to all but a few scenario can be placed in CFcommon and
then overridden in those few scenarios. Plus this change saves one
whole line of code.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, attempting to override a --kcsan default with a --kconfig
option might or might not work. However, it would be good to allow the
user to adjust the --kcsan defaults, for example, to specify a different
time for CONFIG_KCSAN_REPORT_ONCE_IN_MS. This commit therefore uses the
new config_override_param() bash function to apply the --kcsan defaults
and then apply the --kconfig options, which allows this overriding
to occur.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit introduces a config_override_param() bash function that
folds in an additional set of Kconfig options. This is initially applied
to fold in the --kconfig kvm.sh parameter, but later commits will also
apply it to the Kconfig options added by the --kcsan kvm.sh parameter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The #CHECK# directives that can be present in CFcommon and in the
rcutorture scenario Kconfig files are both copied to ConfigFragment
and grepped out of the two directive files and added to ConfigFragment.
This commit therefore removes the redundant "grep" commands and takes
advantage of the consequent opportunity to simplify redirection.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The KCSAN tool emits a great many warnings for current kernels, for
example, a one-hour run of the full set of rcutorture scenarios results
in no fewer than 3252 such warnings, many of which are duplicates
or are otherwise closely related. This commit therefore introduces
a kcsan-collapse.sh script that maps these warnings down to a set of
function pairs (22 of them given the 3252 individual warnings), placing
the resulting list in decreasing order of frequency of occurrence into
a kcsan.sum file. If any KCSAN warnings were produced, the pathname of
this file is emitted at the end of the summary of the rcutorture runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Although the existing --kconfig argument can be used to run KCSAN for
an rcutorture test, it is not as straightforward as one might like:
--kconfig "CONFIG_DEBUG_INFO=y CONFIG_KCSAN=y \
CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=n \
CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY=n \
CONFIG_KCSAN_REPORT_ONCE_IN_MS=100000 \
CONFIG_KCSAN_VERBOSE=y CONFIG_KCSAN_INTERRUPT_WATCHER=y"
This commit therefore adds a "--kcsan" argument that emulates the above
--kconfig command. Note that if you specify a Kconfig option using
-kconfig that conflicts with one that --kcsan adds, you get whatever
the script and the build system decide to give you.
Cc: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The number of CPUs is tuned to allow "4*CFLIST TREE10" on a large system,
up from "3*CFLIST TREE10" previously.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6yqbIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroObBQf+NH9DCs6X92YggAoNpJl6uSIOX35X
ErdWqYj80Xx95QU73aMukjs3Zqxe6WfYI9jPEOD8SDUZzZlVfIA35D8BYlqt1c5R
A2K2ebTQbZ+j487QTUPbEvEivyxyVSozwvOdKBfL5kv0D9Cn2STyjVjmguUoCp9n
VztmwbwpSZdOnexRSolwAWuyOriYbvpV12cIZpcMGrjL67yZPv8UyCxxJplDCLlB
1c8tvGI2Md8apE/YZDqlCFh3H4YBQsact8uOoyY8cXKO/xIAsZOI+Dhm/cQAhGDk
QIQqv/hkM4HPvOXQluwIau4Cx+Fl05xY/ggtQt4z/8yml2pOw8PKmwziZA==
=60QX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes, mostly for ARM and AMD, and more documentation.
Slightly bigger than usual because I couldn't send out what was
pending for rc4, but there is nothing worrisome going on. I have more
fixes pending for guest debugging support (gdbstub) but I will send
them next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
KVM: selftests: Fix build for evmcs.h
kvm: x86: Use KVM CPU capabilities to determine CR4 reserved bits
KVM: VMX: Explicitly clear RFLAGS.CF and RFLAGS.ZF in VM-Exit RSB path
docs/virt/kvm: Document configuring and running nested guests
KVM: s390: Remove false WARN_ON_ONCE for the PQAP instruction
kvm: ioapic: Restrict lazy EOI update to edge-triggered interrupts
KVM: x86: Fixes posted interrupt check for IRQs delivery modes
KVM: SVM: fill in kvm_run->debug.arch.dr[67]
KVM: nVMX: Replace a BUG_ON(1) with BUG() to squash clang warning
KVM: arm64: Fix 32bit PC wrap-around
KVM: arm64: vgic-v4: Initialize GICv4.1 even in the absence of a virtual ITS
KVM: arm64: Save/restore sp_el0 as part of __guest_enter
KVM: arm64: Delete duplicated label in invalid_vector
KVM: arm64: vgic-its: Fix memory leak on the error path of vgic_add_lpi()
KVM: arm64: vgic-v3: Retire all pending LPIs on vcpu destroy
KVM: arm: vgic-v2: Only use the virtual state when userspace accesses pending bits
KVM: arm: vgic: Only use the virtual state when userspace accesses enable bits
KVM: arm: vgic: Synchronize the whole guest on GIC{D,R}_I{S,C}ACTIVER read
KVM: arm64: PSCI: Forbid 64bit functions for 32bit guests
...
Kristen found a hang in objtool when building with -ffunction-sections.
It was caused by evergreen_pcie_gen2_enable.cold() being laid out
immediately before evergreen_pcie_gen2_enable(). Since their "pfunc" is
always the same, find_jump_table() got into an infinite loop because it
didn't recognize the boundary between the two functions.
Fix that with a new prev_insn_same_sym() helper, which doesn't cross
subfunction boundaries.
Reported-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/378b51c9d9c894dc3294bc460b4b0869e950b7c5.1588110291.git.jpoimboe@redhat.com
The single user could have called freeze_secondary_cpus() directly.
Since this function was a source of confusion, remove it as it's
just a pointless wrapper.
While at it, rename enable_nonboot_cpus() to thaw_secondary_cpus() to
preserve the naming symmetry.
Done automatically via:
git grep -l enable_nonboot_cpus | xargs sed -i 's/enable_nonboot_cpus/thaw_secondary_cpus/g'
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://lkml.kernel.org/r/20200430114004.17477-1-qais.yousef@arm.com
Covers fundamental tests for KVM_SET_GUEST_DEBUG. It is very close to the debug
test in kvm-unit-test, but doing it from outside the guest.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200505205000.188252-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull networking fixes from David Miller:
1) Fix reference count leaks in various parts of batman-adv, from Xiyu
Yang.
2) Update NAT checksum even when it is zero, from Guillaume Nault.
3) sk_psock reference count leak in tls code, also from Xiyu Yang.
4) Sanity check TCA_FQ_CODEL_DROP_BATCH_SIZE netlink attribute in
fq_codel, from Eric Dumazet.
5) Fix panic in choke_reset(), also from Eric Dumazet.
6) Fix VLAN accel handling in bnxt_fix_features(), from Michael Chan.
7) Disallow out of range quantum values in sch_sfq, from Eric Dumazet.
8) Fix crash in x25_disconnect(), from Yue Haibing.
9) Don't pass pointer to local variable back to the caller in
nf_osf_hdr_ctx_init(), from Arnd Bergmann.
10) Wireguard should use the ECN decap helper functions, from Toke
Høiland-Jørgensen.
11) Fix command entry leak in mlx5 driver, from Moshe Shemesh.
12) Fix uninitialized variable access in mptcp's
subflow_syn_recv_sock(), from Paolo Abeni.
13) Fix unnecessary out-of-order ingress frame ordering in macsec, from
Scott Dial.
14) IPv6 needs to use a global serial number for dst validation just
like ipv4, from David Ahern.
15) Fix up PTP_1588_CLOCK deps, from Clay McClure.
16) Missing NLM_F_MULTI flag in gtp driver netlink messages, from
Yoshiyuki Kurauchi.
17) Fix a regression in that dsa user port errors should not be fatal,
from Florian Fainelli.
18) Fix iomap leak in enetc driver, from Dejin Zheng.
19) Fix use after free in lec_arp_clear_vccs(), from Cong Wang.
20) Initialize protocol value earlier in neigh code paths when
generating events, from Roman Mashak.
21) netdev_update_features() must be called with RTNL mutex in macsec
driver, from Antoine Tenart.
22) Validate untrusted GSO packets even more strictly, from Willem de
Bruijn.
23) Wireguard decrypt worker needs a cond_resched(), from Jason
Donenfeld.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
net: flow_offload: skip hw stats check for FLOW_ACTION_HW_STATS_DONT_CARE
MAINTAINERS: put DYNAMIC INTERRUPT MODERATION in proper order
wireguard: send/receive: use explicit unlikely branch instead of implicit coalescing
wireguard: selftests: initalize ipv6 members to NULL to squelch clang warning
wireguard: send/receive: cond_resched() when processing worker ringbuffers
wireguard: socket: remove errant restriction on looping to self
wireguard: selftests: use normal kernel stack size on ppc64
net: ethernet: ti: am65-cpsw-nuss: fix irqs type
ionic: Use debugfs_create_bool() to export bool
net: dsa: Do not leave DSA master with NULL netdev_ops
net: dsa: remove duplicate assignment in dsa_slave_add_cls_matchall_mirred
net: stricter validation of untrusted gso packets
seg6: fix SRH processing to comply with RFC8754
net: mscc: ocelot: ANA_AUTOAGE_AGE_PERIOD holds a value in seconds, not ms
net: dsa: ocelot: the MAC table on Felix is twice as large
net: dsa: sja1105: the PTP_CLK extts input reacts on both edges
selftests: net: tcp_mmap: fix SO_RCVLOWAT setting
net: hsr: fix incorrect type usage for protocol variable
net: macsec: fix rtnl locking issue
net: mvpp2: cls: Prevent buffer overflow in mvpp2_ethtool_cls_rule_del()
...
It's already possible to create two different interfaces and loop
packets between them. This has always been possible with tunnels in the
kernel, and isn't specific to wireguard. Therefore, the networking stack
already needs to deal with that. At the very least, the packet winds up
exceeding the MTU and is discarded at that point. So, since this is
already something that happens, there's no need to forbid the not very
exceptional case of routing a packet back to the same interface; this
loop is no different than others, and we shouldn't special case it, but
rather rely on generic handling of loops in general. This also makes it
easier to do interesting things with wireguard such as onion routing.
At the same time, we add a selftest for this, ensuring that both onion
routing works and infinite routing loops do not crash the kernel. We
also add a test case for wireguard interfaces nesting packets and
sending traffic between each other, as well as the loop in this case
too. We make sure to send some throughput-heavy traffic for this use
case, to stress out any possible recursion issues with the locks around
workqueues.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While at some point it might have made sense to be running these tests
on ppc64 with 4k stacks, the kernel hasn't actually used 4k stacks on
64-bit powerpc in a long time, and more interesting things that we test
don't really work when we deviate from the default (16k). So, we stop
pushing our luck in this commit, and return to the default instead of
the minimum.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since chunk_size is no longer an integer, we can not
use it directly as an argument of setsockopt().
This patch should fix tcp_mmap for Big Endian kernels.
Fixes: 597b01edaf ("selftests: net: avoid ptl lock contention in tcp_mmap")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We added fields in tcp_zerocopy_receive structure,
so make sure to clear all fields to not pass garbage to the kernel.
We were lucky because recent additions added 'out' parameters,
still we need to clean our reference implementation, before folks
copy/paste it.
Fixes: c8856c0514 ("tcp-zerocopy: Return inq along with tcp receive zerocopy.")
Fixes: 33946518d4 ("tcp-zerocopy: Return sk_err (if set) along with tcp receive zerocopy.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I got this error when building kvm selftests:
/usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: multiple definition of `current_evmcs'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: first defined here
/usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: multiple definition of `current_vp_assist'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: first defined here
I think it's because evmcs.h is included both in a test file and a lib file so
the structs have multiple declarations when linking. After all it's not a good
habit to declare structs in the header files.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200504220607.99627-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As all the other tools/perf/scripts/python/bin/*-{report,record}
scripts, fixing the this problem reported by Daniel Diaz:
Our OpenEmbedded builds detected an issue with 5287f92692 ("perf
script: Add flamegraph.py script"):
ERROR: perf-1.0-r9 do_package_qa: QA Issue:
/usr/libexec/perf-core/scripts/python/bin/flamegraph-report contained
in package perf-python requires /usr/bin/sh, but no providers found in
RDEPENDS_perf-python? [file-rdeps]
This means that there is a new binary pulled in in the shebang line
which was unaccounted for: `/usr/bin/sh`. I don't see any other usage
of /usr/bin/sh in the kernel tree (does not even exist on my Ubuntu
dev machine) but plenty of /bin/sh. This patch is needed:
-----8<----------8<----------8<-----
diff --git a/tools/perf/scripts/python/bin/flamegraph-record
b/tools/perf/scripts/python/bin/flamegraph-record
index 725d66e71570..a2f3fa25ef81 100755
--- a/tools/perf/scripts/python/bin/flamegraph-record
+++ b/tools/perf/scripts/python/bin/flamegraph-record
@@ -1,2 +1,2 @@
-#!/usr/bin/sh
+#!/bin/sh
perf record -g "$@"
diff --git a/tools/perf/scripts/python/bin/flamegraph-report
b/tools/perf/scripts/python/bin/flamegraph-report
index b1a79afd903b..b0177355619b 100755
--- a/tools/perf/scripts/python/bin/flamegraph-report
+++ b/tools/perf/scripts/python/bin/flamegraph-report
@@ -1,3 +1,3 @@
-#!/usr/bin/sh
+#!/bin/sh
# description: create flame graphs
perf script -s "$PERF_EXEC_PATH"/scripts/python/flamegraph.py -- "$@"
----->8---------->8---------->8-----
Fixes: 5287f92692 ("perf script: Add flamegraph.py script")
Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Acked-by: Andreas Gerstmayr <agerstmayr@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: lkft-triage@lists.linaro.org
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/CAEUSe7_wmKS361mKLTB1eYbzYXcKkXdU26BX5BojdKRz8MfPCw@mail.gmail.com
Link: http://lore.kernel.org/lkml/20200505170320.GZ30487@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The variable 'traceid_list' is defined in the header file cs-etm.h,
if multiple C files include cs-etm.h the compiler might complaint for
multiple definition of 'traceid_list'.
To fix multiple definition error, move the definition of 'traceid_list'
into cs-etm.c.
Fixes: cd8bfd8c97 ("perf tools: Add processing of coresight metadata")
Reported-by: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Thomas Backlund <tmb@mageia.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Tor Jeremiassen <tor@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200505133642.4756-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
hex2u64 is a helper that's out of place in kallsyms.h as not being
kallsyms related. Move from kallsyms.h to the only user.
Committer notes:
Move it out of tools/lib/symbol/kallsyms.c as well, as we had to leave
it there in the previous patch lest we break the build.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200501221315.54715-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf record' will call kallsyms__parse 4 times during startup and
process megabytes of data. This changes kallsyms__parse to use the io
library rather than fgets to improve performance of the user code by
over 8%.
Before:
Running 'internals/kallsyms-parse' benchmark:
Average kallsyms__parse took: 103.988 ms (+- 0.203 ms)
After:
Running 'internals/kallsyms-parse' benchmark:
Average kallsyms__parse took: 95.571 ms (+- 0.006 ms)
For a workload like:
$ perf record /bin/true
Run under 'perf record -e cycles:u -g' the time goes from:
Before
30.10% 1.67% perf perf [.] kallsyms__parse
After
25.55% 20.04% perf perf [.] kallsyms__parse
So a little under 5% of the start-up time is removed. A lot of what
remains is on the kernel side, but caching kallsyms within perf would at
least impact memory footprint.
Committer notes:
The internal/kallsyms-parse bench is run using:
[root@five ~]# perf bench internals kallsyms-parse
# Running 'internals/kallsyms-parse' benchmark:
Average kallsyms__parse took: 80.381 ms (+- 0.115 ms)
[root@five ~]#
And this pre-existing test uses these routines to parse kallsyms and
then compare with the info obtained from the matching ELF symtab:
[root@five ~]# perf test vmlinux
1: vmlinux symtab matches kallsyms : Ok
[root@five ~]#
Also we can't remove hex2u64() in this patch as this breaks the build:
/usr/bin/ld: /tmp/build/perf/perf-in.o: in function `modules__parse':
/home/acme/git/perf/tools/perf/util/symbol.c:607: undefined reference to `hex2u64'
/usr/bin/ld: /home/acme/git/perf/tools/perf/util/symbol.c:607: undefined reference to `hex2u64'
/usr/bin/ld: /tmp/build/perf/perf-in.o: in function `dso__load_perf_map':
/home/acme/git/perf/tools/perf/util/symbol.c:1477: undefined reference to `hex2u64'
/usr/bin/ld: /home/acme/git/perf/tools/perf/util/symbol.c:1483: undefined reference to `hex2u64'
collect2: error: ld returned 1 exit status
Leave it there, move it in the next patch.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200501221315.54715-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
OpenCSD version v0.14.0 adds in a new output element. This is represented
by a new value in the generic element type enum, which must be added to
the handling code in perf cs-etm-decoder to prevent build errors due to
build options on the perf project.
This element is not currently used by the perf decoder.
Perf build feature test updated to require a minimum of 0.14.0
Tested on Linux 5.7-rc3.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200501143615.1180-1-mike.leach@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running commands
./perf record -e rb0000 -- find .
./perf report -v
reveals symbol names and its addresses. There is a mismatch between
kernel symbol and address. Here is an example for kernel symbol
check_chain_key:
3.55% find /lib/modules/.../build/vmlinux 0xf11ec v [k] check_chain_key
This address is off by 0xff000 as can be seen with:
[root@t35lp46 ~]# fgrep check_chain_key /proc/kallsyms
00000000001f00d0 t check_chain_key
[root@t35lp46 ~]# objdump -t ~/linux/vmlinux| fgrep check_chain_key
00000000001f00d0 l F .text 00000000000001e8 check_chain_key
[root@t35lp46 ~]#
This function is located in main memory 0x1f00d0 - 0x1f02b4. It has
several entries in the perf data file with the correct address:
[root@t35lp46 perf]# ./perf report -D -i perf.data.find-bad | \
fgrep SAMPLE| fgrep 0x1f01ec
PERF_RECORD_SAMPLE(IP, 0x1): 22228/22228: 0x1f01ec period: 1300000 addr: 0
PERF_RECORD_SAMPLE(IP, 0x1): 22228/22228: 0x1f01ec period: 1300000 addr: 0
The root cause happens when reading symbol tables during perf report.
A long gdb call chain leads to
machine__deliver_events
perf_evlist__deliver_event
perf_evlist__deliver_sample
build_id__mark_dso_hits
thread__find_map(1) Read correct address from sample entry
map__load
dso__load Some more functions to end up in
....
dso__load_sym.
Function dso__load_syms checks for kernel relocation and symbol
adjustment for the kernel and results in kernel map adjustment of
kernel .text segment address (0x100000 on s390)
kernel .text segment offset in file (0x1000 on s390).
This results in all kernel symbol addresses to be changed by subtracting
0xff000 (on s390). For the symbol check_chain_key we end up with
0x1f00d0 - 0x100000 + 0x1000 = 0xf11d0
and this address is saved in the perf symbol table. This calculation is
also applied by the mapping functions map__mapip() and map__unmapip()
to map IP addresses to dso mappings.
During perf report processing functions
process_sample_event (builtin-report.c)
machine__resolve
thread__find_map
hist_entry_iter_add
are called. Function thread__find_map(1)
takes the correct sample address and applies the mapping function
map__mapip() from the kernel dso and saves the modified address
in struct addr_location for further reference. From now on this address
is used.
Funktion process_sample_event() then calls hist_entry_iter_add() to save
the address in member ip of struct hist_entry.
When samples are displayed using
perf_evlist__tty_browse_hists
hists__fprintf
hist_entry__fprintf
hist_entry__snprintf
__hist_entry__snprintf
_hist_entry__sym_snprintf()
This simply displays the address of the symbol and ignores the dso <-> map
mappings done in function thread__find_map. This leads to the address
mismatch.
Output before:
ot@t35lp46 perf]# ./perf report -v | fgrep check_chain_key
3.55% find /lib/modules/5.6.0d-perf+/build/vmlinux
0xf11ec v [k] check_chain_key
[root@t35lp46 perf]#
Output after:
[root@t35lp46 perf]# ./perf report -v | fgrep check_chain_key
3.55% find /lib/modules/5.6.0d-perf+/build/vmlinux
0x1f01ec v [k] check_chain_key
[root@t35lp46 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200415070744.59919-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those is a 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those is a 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those is a 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those is a 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those is a 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those is a 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those is a 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those is a 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As these are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 4c358d5cf3 ("perf stat: Replace transaction event possition check
with id check") all its uses were removed, so ditch it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those are 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is used by libpfm4 during event parsing to locate the pmu for an
event.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: http://lore.kernel.org/lkml/20200429231443.207201-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
commit e9cfa47e68 ("perf doc: allow ASCIIDOC_EXTRA to be an argument")
allowed ASCIIDOC_EXTRA to be passed as an option to the Documentation
Makefile. This change passes ASCIIDOC_EXTRA, set by detected features or
command line options, prior to doing a Documentation build. This is
necessary to allow conditional compilation, based on configuration
variables, in asciidoc code.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: http://lore.kernel.org/lkml/20200429231443.207201-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Realloc of size zero is a free not an error, avoid this causing a double
free. Caught by clang's address sanitizer:
==2634==ERROR: AddressSanitizer: attempting double-free on 0x6020000015f0 in thread T0:
#0 0x5649659297fd in free llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:123:3
#1 0x5649659e9251 in __zfree tools/lib/zalloc.c:13:2
#2 0x564965c0f92c in mem2node__exit tools/perf/util/mem2node.c:114:2
#3 0x564965a08b4c in perf_c2c__report tools/perf/builtin-c2c.c:2867:2
#4 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10
#5 0x564965944348 in run_builtin tools/perf/perf.c:312:11
#6 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8
#7 0x5649659440c4 in run_argv tools/perf/perf.c:408:2
#8 0x564965942e41 in main tools/perf/perf.c:538:3
0x6020000015f0 is located 0 bytes inside of 1-byte region [0x6020000015f0,0x6020000015f1)
freed by thread T0 here:
#0 0x564965929da3 in realloc third_party/llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:164:3
#1 0x564965c0f55e in mem2node__init tools/perf/util/mem2node.c:97:16
#2 0x564965a08956 in perf_c2c__report tools/perf/builtin-c2c.c:2803:8
#3 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10
#4 0x564965944348 in run_builtin tools/perf/perf.c:312:11
#5 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8
#6 0x5649659440c4 in run_argv tools/perf/perf.c:408:2
#7 0x564965942e41 in main tools/perf/perf.c:538:3
previously allocated by thread T0 here:
#0 0x564965929c42 in calloc third_party/llvm/llvm-project/compiler-rt/lib/asan/asan_malloc_linux.cpp:154:3
#1 0x5649659e9220 in zalloc tools/lib/zalloc.c:8:9
#2 0x564965c0f32d in mem2node__init tools/perf/util/mem2node.c:61:12
#3 0x564965a08956 in perf_c2c__report tools/perf/builtin-c2c.c:2803:8
#4 0x564965a0616a in cmd_c2c tools/perf/builtin-c2c.c:2989:10
#5 0x564965944348 in run_builtin tools/perf/perf.c:312:11
#6 0x564965943235 in handle_internal_command tools/perf/perf.c:364:8
#7 0x5649659440c4 in run_argv tools/perf/perf.c:408:2
#8 0x564965942e41 in main tools/perf/perf.c:538:3
v2: add a WARN_ON_ONCE when the free condition arises.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200320182347.87675-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those are not 'struct evsel' methods, not part of tools/lib/perf/,
aka libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those are not 'struct evsel' methods, not part of tools/lib/perf/,
aka libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those are not 'struct evsel' methods, not part of tools/lib/perf/,
aka libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As they are not 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As they are 'struct evsel' methods or related routines, not part of
tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' related method, not part of tools/lib/perf/,
aka libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As they are all 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As the "perf_" prefix should be restricted to functions and types in
tools/lib/perf/, aka libperf, this way we reduce a bit the confusion for
types only in libperf or the ones in the more contained tools/perf/
project.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update documentation to reflect the advent of the --kcore option for
'perf record'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200429150751.12570-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Provide a little more information about the new G and L options,
particularly the issue with large PEBs.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200429150751.12570-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a thread stack function to create a branch stack for hardware events
where the sample records get created some time after the event occurred.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200429150751.12570-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow for a synthesized branch stack to be added to samples. As with
synthesized call chains, the sample type cannot be changed because it is
needed to continue to parse events. So add and use helper function
evsel__has_br_stack() to indicate a branch stack, whether original or
synthesized.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200429150751.12570-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is an existing option to synthesize branch stacks for synthesized
events. Add a new option to synthesize branch stacks for regular events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200429150751.12570-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change Intel PT's branch stack support to use thread stacks. The
advantages of using branch stack support from the thread-stack are:
1. the branches are accumulated separately for each thread
2. the branch stack is cleared only in between continuous traces
This helps pave the way for adding branch stacks to regular events, not
just synthesized events as at present.
While the 2 approaches are not identical, in simple cases the results
can be identical e.g.
Before:
# perf record --kcore -e intel_pt// uname
# perf script --itrace=i10usl -F+brstacksym,+addr,+flags > cmp1.txt
After:
# perf script --itrace=i10usl -F+brstacksym,+addr,+flags > cmp2.txt
# diff -s cmp1.txt cmp2.txt
Files cmp1.txt and cmp2.txt are identical
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200429150751.12570-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The components of the condition do not change, so consolidate them in
one variable.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200429150751.12570-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel PT already has support for creating branch stacks for each context
(per-cpu or per-thread). In the more common per-cpu case, the branch stack
is not separated for different threads, instead being cleared in between
each sample.
That approach will not work very well for adding branch stacks to
regular events. The branch stacks really need to be accumulated
separately for each thread.
As a start to accomplishing that, this patch adds support for putting
branch stack support into the thread-stack. The advantages are:
1. the branches are accumulated separately for each thread
2. the branch stack is cleared only in between continuous traces
This helps pave the way for adding branch stacks to regular events, not
just synthesized events as at present.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200429150751.12570-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
SMT now could be disabled via "/sys/devices/system/cpu/smt/control".
Status is shown in "/sys/devices/system/cpu/smt/active" simply as "0" / "1".
If this knob isn't here then fallback to checking topology as before.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/158817741394.748034.9273604089138009552.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check if access("devices/system/cpu/cpu%d/topology/core_cpus", F_OK)
fails, which will happen unless the current directory is "/sys".
Simply try to read this file first.
Fixes: 0ccdb8407a ("perf tools: Apply new CPU topology sysfs attributes")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/158817718710.747528.11009278875028211991.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Memory leaks found by applying LLVM's libfuzzer on the tools/perf
parse_events function.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200319023101.82458-2-irogers@google.com
[ Did a minor adjustment due to some other previous patch having already set evlist->all_cpus to NULL at perf_evlist__exit() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix another memory leak found by applying LLVM's libfuzzer on parse_events().
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200319023101.82458-1-irogers@google.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
free_list_evsel() deals with tools/perf/ evsels, not with libperf
perf_evsels, use the right destructor and avoid a leak, as
evsel__delete() will delete something perf_evsel__delete() doesn't.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200319023101.82458-1-irogers@google.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a memory leak found by applying LLVM's libfuzzer on parse_events().
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200319023101.82458-1-irogers@google.com
[ split from a larger patch, use zfree() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A NULL pointer may be passed to perf_cpu_map__cpu and then cause a
crash, such as the one commit cb71f7d43e ("libperf: Setup initial
evlist::all_cpus value") fix.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kyle Meyer <meyerk@hpe.com>
Link: http://lore.kernel.org/lkml/1583665157-349023-1-git-send-email-zhe.he@windriver.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is quite big by now, move that code to a separate
record__setup_sb_evlist() routine.
Suggested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200429131106.27974-9-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To register that an option was set, like with the upcoming 'perf record
--switch-output-option' one.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200429131106.27974-7-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. so far we had just one event in that side band thread, a dummy one
with attr.bpf_event set, so that 'perf record' can go ahead and ask the
kernel for further information about BPF programs being loaded.
Allow for more than one event to be there, so that we can use it as
well for the upcoming --switch-output-event feature.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200429131106.27974-6-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid dragging more stuff into the perf python binding in the
following csets.
Reported-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For the upcoming --switch-output-event option we want to create the side
band event, populate it with the specified events and then, if it is
present multiple times, go on adding to it, then, if the BPF tracking is
required, use the first event to set its attr.bpf_event to get those
PERF_RECORD_BPF_EVENT metadata events too.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200429131106.27974-5-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Renaming bpf_event__add_sb_event() to evlist__add_sb_event() and
requiring that the evlist be allocated beforehand.
This will allow using the same side band thread and evlist to be used
for multiple purposes in addition to react to PERF_RECORD_BPF_EVENT soon
after they are generated.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200429131106.27974-4-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Where state related to a 'perf top' session is grouped.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200429131106.27974-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Where state related to a 'perf record' session is grouped.
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200429131106.27974-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Trying to disentangle this a bit further, unfortunately it uses
parse_events(), its interesting to have it separated anyway, so do it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
abs_vdebt is an atomic_64 which tracks how much over budget a given cgroup
is and controls the activation of use_delay mechanism. Once a cgroup goes
over budget from forced IOs, it has to pay it back with its future budget.
The progress guarantee on debt paying comes from the iocg being active -
active iocgs are processed by the periodic timer, which ensures that as time
passes the debts dissipate and the iocg returns to normal operation.
However, both iocg activation and vdebt handling are asynchronous and a
sequence like the following may happen.
1. The iocg is in the process of being deactivated by the periodic timer.
2. A bio enters ioc_rqos_throttle(), calls iocg_activate() which returns
without anything because it still sees that the iocg is already active.
3. The iocg is deactivated.
4. The bio from #2 is over budget but needs to be forced. It increases
abs_vdebt and goes over the threshold and enables use_delay.
5. IO control is enabled for the iocg's subtree and now IOs are attributed
to the descendant cgroups and the iocg itself no longer issues IOs.
This leaves the iocg with stuck abs_vdebt - it has debt but inactive and no
further IOs which can activate it. This can end up unduly punishing all the
descendants cgroups.
The usual throttling path has the same issue - the iocg must be active while
throttled to ensure that future event will wake it up - and solves the
problem by synchronizing the throttling path with a spinlock. abs_vdebt
handling is another form of overage handling and shares a lot of
characteristics including the fact that it isn't in the hottest path.
This patch fixes the above and other possible races by strictly
synchronizing abs_vdebt and use_delay handling with iocg->waitq.lock.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Vlad Dmitriev <vvd@fb.com>
Cc: stable@vger.kernel.org # v5.4+
Fixes: e1518f63f2 ("blk-iocost: Don't let merges push vtime into the future")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently users have to choose a free snapshot id before
calling DEVLINK_CMD_REGION_NEW. This is potentially racy
and inconvenient.
Make the DEVLINK_ATTR_REGION_SNAPSHOT_ID optional and try
to allocate id automatically. Send a message back to the
caller with the snapshot info.
Example use:
$ devlink region new netdevsim/netdevsim1/dummy
netdevsim/netdevsim1/dummy: snapshot 1
$ id=$(devlink -j region new netdevsim/netdevsim1/dummy | \
jq '.[][][][]')
$ devlink region dump netdevsim/netdevsim1/dummy snapshot $id
[...]
$ devlink region del netdevsim/netdevsim1/dummy snapshot $id
v4:
- inline the notification code
v3:
- send the notification only once snapshot creation completed.
v2:
- don't wrap the line containing extack;
- add a few sentences to the docs.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add adjust_phase to ptp_clock_caps capability to allow
user to query if a PHC driver supports adjust phase with
ioctl PTP_CLOCK_GETCAPS command.
Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-05-01 (v2)
The following pull-request contains BPF updates for your *net-next* tree.
We've added 61 non-merge commits during the last 6 day(s) which contain
a total of 153 files changed, 6739 insertions(+), 3367 deletions(-).
The main changes are:
1) pulled work.sysctl from vfs tree with sysctl bpf changes.
2) bpf_link observability, from Andrii.
3) BTF-defined map in map, from Andrii.
4) asan fixes for selftests, from Andrii.
5) Allow bpf_map_lookup_elem for SOCKMAP and SOCKHASH, from Jakub.
6) production cloudflare classifier as a selftes, from Lorenz.
7) bpf_ktime_get_*_ns() helper improvements, from Maciej.
8) unprivileged bpftool feature probe, from Quentin.
9) BPF_ENABLE_STATS command, from Song.
10) enable bpf_[gs]etsockopt() helpers for sock_ops progs, from Stanislav.
11) enable a bunch of common helpers for cg-device, sysctl, sockopt progs,
from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey pointed out that we can use reno instead of dctcp for CC
tests and drop CONFIG_TCP_CONG_DCTCP=y requirement.
Fixes: beecf11bc2 ("bpf: Bpf_{g,s}etsockopt for struct bpf_sock_addr")
Suggested-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200501224320.28441-1-sdf@google.com
Currently, bpf_getsockopt and bpf_setsockopt helpers operate on the
'struct bpf_sock_ops' context in BPF_PROG_TYPE_SOCK_OPS program.
Let's generalize them and make them available for 'struct bpf_sock_addr'.
That way, in the future, we can allow those helpers in more places.
As an example, let's expose those 'struct bpf_sock_addr' based helpers to
BPF_CGROUP_INET{4,6}_CONNECT hooks. That way we can override CC before the
connection is made.
v3:
* Expose custom helpers for bpf_sock_addr context instead of doing
generic bpf_sock argument (as suggested by Daniel). Even with
try_socket_lock that doesn't sleep we have a problem where context sk
is already locked and socket lock is non-nestable.
v2:
* s/BPF_PROG_TYPE_CGROUP_SOCKOPT/BPF_PROG_TYPE_SOCK_OPS/
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200430233152.199403-1-sdf@google.com
Currently, sysctl kernel.bpf_stats_enabled controls BPF runtime stats.
Typical userspace tools use kernel.bpf_stats_enabled as follows:
1. Enable kernel.bpf_stats_enabled;
2. Check program run_time_ns;
3. Sleep for the monitoring period;
4. Check program run_time_ns again, calculate the difference;
5. Disable kernel.bpf_stats_enabled.
The problem with this approach is that only one userspace tool can toggle
this sysctl. If multiple tools toggle the sysctl at the same time, the
measurement may be inaccurate.
To fix this problem while keep backward compatibility, introduce a new
bpf command BPF_ENABLE_STATS. On success, this command enables stats and
returns a valid fd. BPF_ENABLE_STATS takes argument "type". Currently,
only one type, BPF_STATS_RUN_TIME, is supported. We can extend the
command to support other types of stats in the future.
With BPF_ENABLE_STATS, user space tool would have the following flow:
1. Get a fd with BPF_ENABLE_STATS, and make sure it is valid;
2. Check program run_time_ns;
3. Sleep for the monitoring period;
4. Check program run_time_ns again, calculate the difference;
5. Close the fd.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200430071506.1408910-2-songliubraving@fb.com
kvm test Makefile doesn't fully support cross-builds and installs.
UNAME_M = $(shell uname -m) variable is used to define the target
programs and libraries to be built from arch specific sources in
sub-directories.
For cross-builds to work, UNAME_M has to map to ARCH and arch specific
directories and targets in this Makefile.
UNAME_M variable to used to run the compiles pointing to the right arch
directories and build the right targets for these supported architectures.
TEST_GEN_PROGS and LIBKVM are set using UNAME_M variable.
LINUX_TOOL_ARCH_INCLUDE is set using ARCH variable.
x86_64 targets are named to include x86_64 as a suffix and directories
for includes are in x86_64 sub-directory. s390x and aarch64 follow the
same convention. "uname -m" doesn't result in the correct mapping for
s390x and aarch64. Fix it to set UNAME_M correctly for s390x and aarch64
cross-builds.
In addition, Makefile doesn't create arch sub-directories in the case of
relocatable builds and test programs under s390x and x86_64 directories
fail to build. This is a problem for native and cross-builds. Fix it to
create all necessary directories keying off of TEST_GEN_PROGS.
The following use-cases work with this change:
Native x86_64:
make O=/tmp/kselftest -C tools/testing/selftests TARGETS=kvm install \
INSTALL_PATH=$HOME/x86_64
arm64 cross-build:
make O=$HOME/arm64_build/ ARCH=arm64 HOSTCC=gcc \
CROSS_COMPILE=aarch64-linux-gnu- defconfig
make O=$HOME/arm64_build/ ARCH=arm64 HOSTCC=gcc \
CROSS_COMPILE=aarch64-linux-gnu- all
make kselftest-install TARGETS=kvm O=$HOME/arm64_build ARCH=arm64 \
HOSTCC=gcc CROSS_COMPILE=aarch64-linux-gnu-
s390x cross-build:
make O=$HOME/s390x_build/ ARCH=s390 HOSTCC=gcc \
CROSS_COMPILE=s390x-linux-gnu- defconfig
make O=$HOME/s390x_build/ ARCH=s390 HOSTCC=gcc \
CROSS_COMPILE=s390x-linux-gnu- all
make kselftest-install TARGETS=kvm O=$HOME/s390x_build/ ARCH=s390 \
HOSTCC=gcc CROSS_COMPILE=s390x-linux-gnu- all
No regressions in the following use-cases:
make -C tools/testing/selftests TARGETS=kvm
make kselftest-all TARGETS=kvm
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since XFAIL (Expected Failure) is expected to fail the test, which
means that test case works as we expected. IOW, XFAIL is same as
PASS. So make it green.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, ftracetest will return 1 (failure) if any unresolved cases
are encountered. The unresolved status results from modules and
programs not being available, and as such does not indicate any
issues with ftrace itself. As such, change the behaviour of
ftracetest in line with unsupported cases; if unsupported cases
happen, ftracetest still returns 0 unless --fail-unsupported. Here
--fail-unresolved is added and the default is to return 0 if
unresolved results occur.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
wakeup_rt.tc and wakeup.tc tests in tracers/ subdirectory
fail due to the chrt command returning:
chrt: failed to set pid 0's policy: Operation not permitted.
To work around this, temporarily disable grout RT scheduling
during ftracetest execution. Restore original value on
test run completion. With these changes in place, both
tests consistently pass.
Fixes: c575dea2c1 ("selftests/ftrace: Add wakeup_rt tracer testcase")
Fixes: c1edd060b4 ("selftests/ftrace: Add wakeup tracer testcase")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This kselftest update for Linux 5.7-rc4 consists of:
- ftrace test fixes to check for required filter files and kprobe args.
- Kselftest build/cross-build dependency check script to make it easier
for test ring admins/users to configure build systems correctly for
build/cross-build kselftests. Currently checks library dependencies.
- Checks if Kselftests can be built/cross-built on a system running
compile test on a trivial C file with LDLIBS specified for each
individual test in their Makefiles.
- Prints suggested target list for a system filtering out tests
failed the build dependency check from the TARGETS in Selftests
the main Makefile when optional -p is specified.
- Prints pass/fail dependency check for each tests/sub-test.
- Prints pass/fail targets and libraries.
- Default: runs dependency checks on all tests.
- Optional test name can be specified to check dependencies for it.
-----BEGIN PGP SIGNATURE-----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=/gZD
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- ftrace test fixes to check for required filter files and kprobe args.
- Kselftest build/cross-build dependency check script to make it easier
for test ring admins/users to configure build systems correctly for
build/cross-build kselftests. Currently checks library dependencies.
- Checks if Kselftests can be built/cross-built on a system running
compile test on a trivial C file with LDLIBS specified for each
individual test in their Makefiles.
- Prints suggested target list for a system filtering out tests
failed the build dependency check from the TARGETS in Selftests
the main Makefile when optional -p is specified.
- Prints pass/fail dependency check for each tests/sub-test.
- Prints pass/fail targets and libraries.
- Default: runs dependency checks on all tests.
- Optional test name can be specified to check dependencies for it.
* tag 'linux-kselftest-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Check the first record for kprobe_args_type.tc
selftests: add build/cross-build dependency check script
selftests/ftrace: Check required filter files before running test
Wrapping numbers in strings is used by some to work around bit-width issues in
some enviroments. The problem isn't innate to json and the workaround seems to
cause more integration problems than help. Let's drop the string wrapping.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is to help external tools to decide whether iocost_monitor has all its
requirements met or not based on the exit status of an -i0 run.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change objtool to support intra-function calls. On x86, an intra-function
call is represented in objtool as a push onto the stack (of the return
address), and a jump to the destination address. That way the stack
information is correctly updated and the call flow is still accurate.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200414103618.12657-4-alexandre.chartre@oracle.com
Quoting Julien:
"And the other suggestion is my other email was that you don't even
need to add INSN_EXCEPTION_RETURN. You can keep IRET as
INSN_CONTEXT_SWITCH by default and x86 decoder lookups the symbol
conaining an iret. If it's a function symbol, it can just set the type
to INSN_OTHER so that it caries on to the next instruction after
having handled the stack_op."
Suggested-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200428191659.913283807@infradead.org
With the unconditional use of handle_insn_ops(), INSN_STACK has lost
its purpose. Remove it.
Suggested-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200428191659.854203028@infradead.org
Now that every instruction has a list of stack_ops; we can trivially
distinquish those instructions that do not have stack_ops, their list
is empty.
This means we can now call handle_insn_ops() unconditionally.
Suggested-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200428191659.795115188@infradead.org
Wrap each stack_op in a macro that allocates and adds it to the list.
This simplifies trying to figure out what to do with the pre-allocated
stack_op at the end.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200428191659.736151601@infradead.org
UNWIND_HINT_RET_OFFSET will adjust a modified stack. However if a
callee-saved register was pushed on the stack then the stack frame
will still appear modified. So stop checking registers when
UNWIND_HINT_RET_OFFSET is used.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200407073142.20659-3-alexandre.chartre@oracle.com
Fix is_fentry_call() so that it works if a call has no destination
set (call_dest). This needs to be done in order to support intra-
function calls.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200414103618.12657-2-alexandre.chartre@oracle.com
Jann reported that (for instance) entry_64.o:general_protection has
very odd ORC data:
0000000000000f40 <general_protection>:
#######sp:sp+8 bp:(und) type:iret end:0
f40: 90 nop
#######sp:(und) bp:(und) type:call end:0
f41: 90 nop
f42: 90 nop
#######sp:sp+8 bp:(und) type:iret end:0
f43: e8 a8 01 00 00 callq 10f0 <error_entry>
#######sp:sp+0 bp:(und) type:regs end:0
f48: f6 84 24 88 00 00 00 testb $0x3,0x88(%rsp)
f4f: 03
f50: 74 00 je f52 <general_protection+0x12>
f52: 48 89 e7 mov %rsp,%rdi
f55: 48 8b 74 24 78 mov 0x78(%rsp),%rsi
f5a: 48 c7 44 24 78 ff ff movq $0xffffffffffffffff,0x78(%rsp)
f61: ff ff
f63: e8 00 00 00 00 callq f68 <general_protection+0x28>
f68: e9 73 02 00 00 jmpq 11e0 <error_exit>
#######sp:(und) bp:(und) type:call end:0
f6d: 0f 1f 00 nopl (%rax)
Note the entry at 0xf41. Josh found this was the result of commit:
764eef4b10 ("objtool: Rewrite alt->skip_orig")
Due to the early return in validate_branch() we no longer set
insn->cfi of the original instruction stream (the NOPs at 0xf41 and
0xf42) and we'll end up with the above weirdness.
In other discussions we realized alternatives should be ORC invariant;
that is, due to there being only a single ORC table, it must be valid
for all alternatives. The easiest way to ensure this is to not allow
any stack modifications in alternatives.
When we enforce this latter observation, we get the property that the
whole alternative must have the same CFI, which we can employ to fix
the former report.
Fixes: 764eef4b10 ("objtool: Rewrite alt->skip_orig")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200428191659.499074346@infradead.org
Assign a unique identifier to every alternative instruction group in
order to be able to tell which instructions belong to what
alternative.
[peterz: extracted from a larger patch]
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
While jumping from outside an alternative region to the middle of an
alternative region is very likely wrong, jumping from an alternative
region into the same region is valid. It is a common pattern on arm64.
The first pattern is unlikely to happen in practice and checking only
for this adds a lot of complexity.
Just remove the current check.
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/20200327152847.15294-6-jthierry@redhat.com
As agreed with Boris, merge in the 'x86/asm' branch from -tip so that we
can select the new 'ARCH_USE_SYM_ANNOTATIONS' Kconfig symbol, which is
required by the BTI kernel patches.
* 'x86/asm' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Provide a Kconfig symbol for disabling old assembly annotations
x86/32: Remove CONFIG_DOUBLEFAULT
Check that verifier allows passing a map of type:
BPF_MAP_TYPE_REUSEPORT_SOCKARRARY, or
BPF_MAP_TYPE_SOCKMAP, or
BPF_MAP_TYPE_SOCKHASH
... to bpf_sk_select_reuseport helper.
Suggested-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200430104738.494180-1-jakub@cloudflare.com
Some versions of GCC falsely detect that vi might not be initialized. That's
not true, but let's silence it with NULL initialization.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200430021436.1522502-1-andriin@fb.com
Commit 54b5091606 ("perf stat: Implement --metric-only mode") added
function 'valid_only_metric()' which drops "Hz" or "hz", if it is part
of "ScaleUnit". This patch enable it since hv_24x7 supports couple of
frequency events.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20200401203340.31402-7-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Added test case for parsing "?" in metric expression.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20200401203340.31402-6-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Patch enhances current metric infrastructure to handle "?" in the metric
expression. The "?" can be use for parameters whose value not known
while creating metric events and which can be replace later at runtime
to the proper value. It also add flexibility to create multiple events
out of single metric event added in JSON file.
Patch adds function 'arch_get_runtimeparam' which is a arch specific
function, returns the count of metric events need to be created. By
default it return 1.
This infrastructure needed for hv_24x7 socket/chip level events.
"hv_24x7" chip level events needs specific chip-id to which the data is
requested. Function 'arch_get_runtimeparam' implemented in header.c
which extract number of sockets from sysfs file "sockets" under
"/sys/devices/hv_24x7/interface/".
With this patch basically we are trying to create as many metric events
as define by runtime_param.
For that one loop is added in function 'metricgroup__add_metric', which
create multiple events at run time depend on return value of
'arch_get_runtimeparam' and merge that event in 'group_list'.
To achieve that we are actually passing this parameter value as part of
`expr__find_other` function and changing "?" present in metric
expression with this value.
As in our JSON file, there gonna be single metric event, and out of
which we are creating multiple events.
To understand which data count belongs to which parameter value,
we also printing param value in generic_metric function.
For example,
command:# ./perf stat -M PowerBUS_Frequency -C 0 -I 1000
1.000101867 9,356,933 hv_24x7/pm_pb_cyc,chip=0/ # 2.3 GHz PowerBUS_Frequency_0
1.000101867 9,366,134 hv_24x7/pm_pb_cyc,chip=1/ # 2.3 GHz PowerBUS_Frequency_1
2.000314878 9,365,868 hv_24x7/pm_pb_cyc,chip=0/ # 2.3 GHz PowerBUS_Frequency_0
2.000314878 9,366,092 hv_24x7/pm_pb_cyc,chip=1/ # 2.3 GHz PowerBUS_Frequency_1
So, here _0 and _1 after PowerBUS_Frequency specify parameter value.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20200401203340.31402-5-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes coccicheck warning:
tools/perf/builtin-report.c:1403:2-34: WARNING: Assignment of 0/1 to bool variable
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1587904683-3510-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The synthesize benchmark, run on a single process and thread, shows
perf_event__synthesize_mmap_events as the hottest function with fgets
and sscanf taking the majority of execution time.
fscanf performs similarly well. Replace the scanf call with manual
reading of each field of the /proc/pid/maps line, and remove some
unnecessary buffering.
This change also addresses potential, but unlikely, buffer overruns for
the string values read by scanf.
Performance before is:
$ sudo perf bench internals synthesize -m 16 -M 16 -s -t
\# Running 'internals/synthesize' benchmark:
Computing performance of single threaded perf event synthesis by
synthesizing events on the perf process itself:
Average synthesis took: 102.810 usec (+- 0.027 usec)
Average num. events: 17.000 (+- 0.000)
Average time per event 6.048 usec
Average data synthesis took: 106.325 usec (+- 0.018 usec)
Average num. events: 89.000 (+- 0.000)
Average time per event 1.195 usec
Computing performance of multi threaded perf event synthesis by
synthesizing events on CPU 0:
Number of synthesis threads: 16
Average synthesis took: 68103.100 usec (+- 441.234 usec)
Average num. events: 30703.000 (+- 0.730)
Average time per event 2.218 usec
And after is:
$ sudo perf bench internals synthesize -m 16 -M 16 -s -t
\# Running 'internals/synthesize' benchmark:
Computing performance of single threaded perf event synthesis by
synthesizing events on the perf process itself:
Average synthesis took: 50.388 usec (+- 0.031 usec)
Average num. events: 17.000 (+- 0.000)
Average time per event 2.964 usec
Average data synthesis took: 52.693 usec (+- 0.020 usec)
Average num. events: 89.000 (+- 0.000)
Average time per event 0.592 usec
Computing performance of multi threaded perf event synthesis by
synthesizing events on CPU 0:
Number of synthesis threads: 16
Average synthesis took: 45022.400 usec (+- 552.740 usec)
Average num. events: 30624.200 (+- 10.037)
Average time per event 1.470 usec
On a Intel Xeon 6154 compiling with Debian gcc 9.2.1.
Committer testing:
On a AMD Ryzen 5 3600X 6-Core Processor:
Before:
# perf bench internals synthesize --min-threads 12 --max-threads 12 --st --mt
# Running 'internals/synthesize' benchmark:
Computing performance of single threaded perf event synthesis by
synthesizing events on the perf process itself:
Average synthesis took: 267.491 usec (+- 0.176 usec)
Average num. events: 56.000 (+- 0.000)
Average time per event 4.777 usec
Average data synthesis took: 277.257 usec (+- 0.169 usec)
Average num. events: 287.000 (+- 0.000)
Average time per event 0.966 usec
Computing performance of multi threaded perf event synthesis by
synthesizing events on CPU 0:
Number of synthesis threads: 12
Average synthesis took: 81599.500 usec (+- 346.315 usec)
Average num. events: 36096.100 (+- 2.523)
Average time per event 2.261 usec
#
After:
# perf bench internals synthesize --min-threads 12 --max-threads 12 --st --mt
# Running 'internals/synthesize' benchmark:
Computing performance of single threaded perf event synthesis by
synthesizing events on the perf process itself:
Average synthesis took: 110.125 usec (+- 0.080 usec)
Average num. events: 56.000 (+- 0.000)
Average time per event 1.967 usec
Average data synthesis took: 118.518 usec (+- 0.057 usec)
Average num. events: 287.000 (+- 0.000)
Average time per event 0.413 usec
Computing performance of multi threaded perf event synthesis by
synthesizing events on CPU 0:
Number of synthesis threads: 12
Average synthesis took: 43490.700 usec (+- 284.527 usec)
Average num. events: 37028.500 (+- 0.563)
Average time per event 1.175 usec
#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrey Zhizhikin <andrey.z@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200415054050.31645-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The synthesize benchmark shows the majority of execution time going to
fgets and sscanf, necessary to parse /proc/pid/maps. Add a new buffered
reading library that will be used to replace these calls in a follow-up
CL. Add tests for the library to perf test.
Committer tests:
$ perf test api
63: Test api io : Ok
$
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrey Zhizhikin <andrey.z@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200415054050.31645-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By default this isn't run as it reads /proc and may not have access.
For consistency, modify the single threaded benchmark to compute an
average time per event.
Committer testing:
$ grep -m1 "model name" /proc/cpuinfo
model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
$ grep "model name" /proc/cpuinfo | wc -l
8
$
$ perf bench internals synthesize -h
# Running 'internals/synthesize' benchmark:
Usage: perf bench internals synthesize <options>
-I, --multi-iterations <n>
Number of iterations used to compute multi-threaded average
-i, --single-iterations <n>
Number of iterations used to compute single-threaded average
-M, --max-threads <n>
Maximum number of threads in multithreaded bench
-m, --min-threads <n>
Minimum number of threads in multithreaded bench
-s, --st Run single threaded benchmark
-t, --mt Run multi-threaded benchmark
$
$ perf bench internals synthesize -t
# Running 'internals/synthesize' benchmark:
Computing performance of multi threaded perf event synthesis by
synthesizing events on CPU 0:
Number of synthesis threads: 1
Average synthesis took: 65449.000 usec (+- 586.442 usec)
Average num. events: 9405.400 (+- 0.306)
Average time per event 6.959 usec
Number of synthesis threads: 2
Average synthesis took: 37838.300 usec (+- 130.259 usec)
Average num. events: 9501.800 (+- 20.469)
Average time per event 3.982 usec
Number of synthesis threads: 3
Average synthesis took: 48551.400 usec (+- 225.686 usec)
Average num. events: 9544.000 (+- 0.000)
Average time per event 5.087 usec
Number of synthesis threads: 4
Average synthesis took: 29632.500 usec (+- 50.808 usec)
Average num. events: 9544.000 (+- 0.000)
Average time per event 3.105 usec
Number of synthesis threads: 5
Average synthesis took: 33920.400 usec (+- 284.509 usec)
Average num. events: 9544.000 (+- 0.000)
Average time per event 3.554 usec
Number of synthesis threads: 6
Average synthesis took: 27604.100 usec (+- 72.344 usec)
Average num. events: 9548.000 (+- 0.000)
Average time per event 2.891 usec
Number of synthesis threads: 7
Average synthesis took: 25406.300 usec (+- 933.371 usec)
Average num. events: 9545.500 (+- 0.167)
Average time per event 2.662 usec
Number of synthesis threads: 8
Average synthesis took: 24110.400 usec (+- 73.229 usec)
Average num. events: 9551.000 (+- 0.000)
Average time per event 2.524 usec
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrey Zhizhikin <andrey.z@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200415054050.31645-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update bpf_sk_assign test to fetch the server socket from SOCKMAP, now that
map lookup from BPF in SOCKMAP is enabled. This way the test TC BPF program
doesn't need to know what address server socket is bound to.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429181154.479310-4-jakub@cloudflare.com
Now that bpf_map_lookup_elem() is white-listed for SOCKMAP/SOCKHASH,
replace the tests which check that verifier prevents lookup on these map
types with ones that ensure that lookup operation is permitted, but only
with a release of acquired socket reference.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429181154.479310-3-jakub@cloudflare.com
The new libcap dependency is not used for an essential feature of
bpftool, and we could imagine building the tool without checks on
CAP_SYS_ADMIN by disabling probing features as an unprivileged users.
Make it so, in order to avoid a hard dependency on libcap, and to ease
packaging/embedding of bpftool.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429144506.8999-4-quentin@isovalent.com
There is demand for a way to identify what BPF helper functions are
available to unprivileged users. To do so, allow unprivileged users to
run "bpftool feature probe" to list BPF-related features. This will only
show features accessible to those users, and may not reflect the full
list of features available (to administrators) on the system.
To avoid the case where bpftool is inadvertently run as non-root and
would list only a subset of the features supported by the system when it
would be expected to list all of them, running as unprivileged is gated
behind the "unprivileged" keyword passed to the command line. When used
by a privileged user, this keyword allows to drop the CAP_SYS_ADMIN and
to list the features available to unprivileged users. Note that this
addsd a dependency on libpcap for compiling bpftool.
Note that there is no particular reason why the probes were restricted
to root, other than the fact I did not need them for unprivileged and
did not bother with the additional checks at the time probes were added.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429144506.8999-3-quentin@isovalent.com
The "full_mode" variable used for switching between full or partial
feature probing (i.e. with or without probing helpers that will log
warnings in kernel logs) was piped from the main do_probe() function
down to probe_helpers_for_progtype(), where it is needed.
Define it as a global variable: the calls will be more readable, and if
other similar flags were to be used in the future, we could use global
variables as well instead of extending again the list of arguments with
new flags.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429144506.8999-2-quentin@isovalent.com
With recent changes, runqslower is being copied into selftests/bpf root
directory. So add it into .gitignore.
Fixes: b26d1e2b60 ("selftests/bpf: Copy runqslower to OUTPUT directory")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Veronika Kabatova <vkabatov@redhat.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-12-andriin@fb.com
If condition is inverted, but it's also just not necessary.
Fixes: 1c1052e014 ("tools/testing/selftests/bpf: Add self-tests for new helper bpf_get_ns_current_pid_tgid.")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Carlos Neira <cneirabustos@gmail.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-11-andriin@fb.com
AddressSanitizer assumes that all memory dereferences are done against memory
allocated by sanitizer's malloc()/free() code and not touched by anyone else.
Seems like this doesn't hold for perf buffer memory. Disable instrumentation
on perf buffer callback function.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-10-andriin@fb.com
Another one found by AddressSanitizer. input_len is bigger than actually
initialized data size.
Fixes: c7566a6969 ("selftests/bpf: Add field existence CO-RE relocs tests")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-8-andriin@fb.com
getline() allocates string, which has to be freed.
Fixes: 81f77fd0de ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-7-andriin@fb.com
Free test selector substrings, which were strdup()'ed.
Fixes: b65053cd94 ("selftests/bpf: Add whitelist/blacklist of test names to test_progs")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-6-andriin@fb.com
Fix memory leak in hashmap_clear() not freeing hashmap_entry structs for each
of the remaining entries. Also NULL-out bucket list to prevent possible
double-free between hashmap__clear() and hashmap__free().
Running test_progs-asan flavor clearly showed this problem.
Reported-by: Alston Tang <alston64@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-5-andriin@fb.com
Add ability to specify extra compiler flags with SAN_CFLAGS for compilation of
all user-space C files. This allows to build all of selftest programs with,
e.g., custom sanitizer flags, without requiring support for such sanitizers
from anyone compiling selftest/bpf.
As an example, to compile everything with AddressSanitizer, one would do:
$ make clean && make SAN_CFLAGS="-fsanitize=address"
For AddressSanitizer to work, one needs appropriate libasan shared library
installed in the system, with version of libasan matching what GCC links
against. E.g., GCC8 needs libasan5, while GCC7 uses libasan4.
For CentOS 7, to build everything successfully one would need to:
$ sudo yum install devtoolset-8-gcc devtoolset-libasan-devel
$ scl enable devtoolset-8 bash # set up environment
For Arch Linux to run selftests, one would need to install gcc-libs package to
get libasan.so.5:
$ sudo pacman -S gcc-libs
N.B. EXTRA_CFLAGS name wasn't used, because it's also used by libbpf's
Makefile and this causes few issues:
1. default "-g -Wall" flags are overriden;
2. compiling shared library with AddressSanitizer generates a bunch of symbols
like: "_GLOBAL__sub_D_00099_0_btf_dump.c", "_GLOBAL__sub_D_00099_0_bpf.c",
etc, which screws up versioned symbols check.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Julia Kartseva <hex@fb.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-3-andriin@fb.com
Ensure that test runner flavors include their own skeletons from <flavor>/
directory. Previously, skeletons generated for no-flavor test_progs were used.
Apart from fixing correctness, this also makes it possible to compile only
flavors individually:
$ make clean && make test_progs-no_alu32
... now succeeds ...
Fixes: 74b5a5968f ("selftests/bpf: Replace test_progs and test_maps w/ general rule")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-2-andriin@fb.com
As discussed at LPC 2019 ([0]), this patch brings (a quite belated) support
for declarative BTF-defined map-in-map support in libbpf. It allows to define
ARRAY_OF_MAPS and HASH_OF_MAPS BPF maps without any user-space initialization
code involved.
Additionally, it allows to initialize outer map's slots with references to
respective inner maps at load time, also completely declaratively.
Despite a weak type system of C, the way BTF-defined map-in-map definition
works, it's actually quite hard to accidentally initialize outer map with
incompatible inner maps. This being C, of course, it's still possible, but
even that would be caught at load time and error returned with helpful debug
log pointing exactly to the slot that failed to be initialized.
As an example, here's a rather advanced HASH_OF_MAPS declaration and
initialization example, filling slots #0 and #4 with two inner maps:
#include <bpf/bpf_helpers.h>
struct inner_map {
__uint(type, BPF_MAP_TYPE_ARRAY);
__uint(max_entries, 1);
__type(key, int);
__type(value, int);
} inner_map1 SEC(".maps"),
inner_map2 SEC(".maps");
struct outer_hash {
__uint(type, BPF_MAP_TYPE_HASH_OF_MAPS);
__uint(max_entries, 5);
__uint(key_size, sizeof(int));
__array(values, struct inner_map);
} outer_hash SEC(".maps") = {
.values = {
[0] = &inner_map2,
[4] = &inner_map1,
},
};
Here's the relevant part of libbpf debug log showing pretty clearly of what's
going on with map-in-map initialization:
libbpf: .maps relo #0: for 6 value 0 rel.r_offset 96 name 260 ('inner_map1')
libbpf: .maps relo #0: map 'outer_arr' slot [0] points to map 'inner_map1'
libbpf: .maps relo #1: for 7 value 32 rel.r_offset 112 name 249 ('inner_map2')
libbpf: .maps relo #1: map 'outer_arr' slot [2] points to map 'inner_map2'
libbpf: .maps relo #2: for 7 value 32 rel.r_offset 144 name 249 ('inner_map2')
libbpf: .maps relo #2: map 'outer_hash' slot [0] points to map 'inner_map2'
libbpf: .maps relo #3: for 6 value 0 rel.r_offset 176 name 260 ('inner_map1')
libbpf: .maps relo #3: map 'outer_hash' slot [4] points to map 'inner_map1'
libbpf: map 'inner_map1': created successfully, fd=4
libbpf: map 'inner_map2': created successfully, fd=5
libbpf: map 'outer_hash': created successfully, fd=7
libbpf: map 'outer_hash': slot [0] set to map 'inner_map2' fd=5
libbpf: map 'outer_hash': slot [4] set to map 'inner_map1' fd=4
Notice from the log above that fd=6 (not logged explicitly) is used for inner
"prototype" map, necessary for creation of outer map. It is destroyed
immediately after outer map is created.
See also included selftest with some extra comments explaining extra details
of usage. Additionally, similar initialization syntax and libbpf functionality
can be used to do initialization of BPF_PROG_ARRAY with references to BPF
sub-programs. This can be done in follow up patches, if there will be a demand
for this.
[0] https://linuxplumbersconf.org/event/4/contributions/448/
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200429002739.48006-4-andriin@fb.com
Factor out map creation and destruction logic to simplify code and especially
error handling. Also fix map FD leak in case of partially successful map
creation during bpf_object load operation.
Fixes: 57a00f4164 ("libbpf: Add auto-pinning of maps when loading BPF objects")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200429002739.48006-3-andriin@fb.com
Move attach_type_strings into main.h for access in non-cgroup code.
bpf_attach_type is used for non-cgroup attach types quite widely now. So also
complete missing string translations for non-cgroup attach types.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200429001614.1544-8-andriin@fb.com
Add ability to fetch bpf_link details through BPF_OBJ_GET_INFO_BY_FD command.
Also enhance show_fdinfo to potentially include bpf_link type-specific
information (similarly to obj_info).
Also introduce enum bpf_link_type stored in bpf_link itself and expose it in
UAPI. bpf_link_tracing also now will store and return bpf_attach_type.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429001614.1544-5-andriin@fb.com
Similar to commit b7a0d65d80 ("bpf, testing: Workaround a verifier failure for test_progs")
fix test_sysctl_prog.c as well.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- add SPDX header;
- adjust title markup;
- mark code blocks and literals as such;
- use footnote markup;
- mark tables as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
TLS 1.2 and TLS 1.3 differ in the implementation.
Use fixture parameters to run all tests for both
versions, and remove the one-off TLS 1.2 test.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow users to build parameterized variants of fixtures.
If fixtures want variants, they call FIXTURE_VARIANT() to declare
the structure to fill for each variant. Each fixture will be re-run
for each of the variants defined by calling FIXTURE_VARIANT_ADD()
with the differing parameters initializing the structure.
Since tests are being re-run, additional initialization (steps,
no_print) is also added.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that all tests have a fixture object move from a global
list of tests to a list of tests per fixture.
Order of tests may change as we will now group and run test
fixture by fixture, rather than in declaration order.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Grouping tests by fixture will allow us to parametrize
test runs. Create full objects for fixtures.
Add a "global" fixture for tests without a fixture.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kees suggest to factor out the list append code to a macro,
since following commits need it, which leads to code duplication.
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
New tests to check route dump and notifications with
net.ipv4.nexthop_compat_mode on and off.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following coccicheck warning:
tools/lib/bpf/btf_dump.c:661:4-5: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1588064829-70613-1-git-send-email-zou_wei@huawei.com
$(OUTPUT)/runqslower makefile target doesn't actually create runqslower
binary in the $(OUTPUT) directory. As lib.mk expects all
TEST_GEN_PROGS_EXTENDED (which runqslower is a part of) to be present in
the OUTPUT directory, this results in an error when running e.g. `make
install`:
rsync: link_stat "tools/testing/selftests/bpf/runqslower" failed: No
such file or directory (2)
Copy the binary into the OUTPUT directory after building it to fix the
error.
Fixes: 3a0d3092a4 ("selftests/bpf: Build runqslower from selftests")
Signed-off-by: Veronika Kabatova <vkabatov@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200428173742.2988395-1-vkabatov@redhat.com
Add test for matchall classifier with mirred egress mirror action.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new port attribute, IFLA_BRPORT_MRP_RING_OPEN, which allows
to notify the userspace when the port lost the continuite of MRP frames.
This attribute is set by kernel whenever the SW or HW detects that the ring is
being open or closed.
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
System hangs or killed rcutorture guest OSes can result in truncated
"Reader Pipe:" lines, which can in turn result in false-positive
reader-batch near-miss warnings. This commit therefore adjusts the
reader-batch checks to account for possible line truncation.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a TRACE02 scenario which enables preemption and RCU
Tasks Trace IPIs, more specifically, disabling heavyweight readers.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
bpf_object__load() has various return code, when it failed to load
object, it must return err instead of -EINVAL.
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200426063635.130680-3-maowenan@huawei.com
cls_redirect is a TC clsact based replacement for the glb-redirect iptables
module available at [1]. It enables what GitHub calls "second chance"
flows [2], similarly proposed by the Beamer paper [3]. In contrast to
glb-redirect, it also supports migrating UDP flows as long as connected
sockets are used. cls_redirect is in production at Cloudflare, as part of
our own L4 load balancer.
We have modified the encapsulation format slightly from glb-redirect:
glbgue_chained_routing.private_data_type has been repurposed to form a
version field and several flags. Both have been arranged in a way that
a private_data_type value of zero matches the current glb-redirect
behaviour. This means that cls_redirect will understand packets in
glb-redirect format, but not vice versa.
The test suite only covers basic features. For example, cls_redirect will
correctly forward path MTU discovery packets, but this is not exercised.
It is also possible to switch the encapsulation format to GRE on the last
hop, which is also not tested.
There are two major distinctions from glb-redirect: first, cls_redirect
relies on receiving encapsulated packets directly from a router. This is
because we don't have access to the neighbour tables from BPF, yet. See
forward_to_next_hop for details. Second, cls_redirect performs decapsulation
instead of using separate ipip and sit tunnel devices. This
avoids issues with the sit tunnel [4] and makes deploying the classifier
easier: decapsulated packets appear on the same interface, so existing
firewall rules continue to work as expected.
The code base started it's life on v4.19, so there are most likely still
hold overs from old workarounds. In no particular order:
- The function buf_off is required to defeat a clang optimization
that leads to the verifier rejecting the program due to pointer
arithmetic in the wrong order.
- The function pkt_parse_ipv6 is force inlined, because it would
otherwise be rejected due to returning a pointer to stack memory.
- The functions fill_tuple and classify_tcp contain kludges, because
we've run out of function arguments.
- The logic in general is rather nested, due to verifier restrictions.
I think this is either because the verifier loses track of constants
on the stack, or because it can't track enum like variables.
1: https://github.com/github/glb-director/tree/master/src/glb-redirect
2: https://github.com/github/glb-director/blob/master/docs/development/second-chance-design.md
3: https://www.usenix.org/conference/nsdi18/presentation/olteanu
4: https://github.com/github/glb-director/issues/64
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200424185556.7358-2-lmb@cloudflare.com
To make BPF verifier verbose log more releavant and easier to use to debug
verification failures, "pop" parts of log that were successfully verified.
This has effect of leaving only verifier logs that correspond to code branches
that lead to verification failure, which in practice should result in much
shorter and more relevant verifier log dumps. This behavior is made the
default behavior and can be overriden to do exhaustive logging by specifying
BPF_LOG_LEVEL2 log level.
Using BPF_LOG_LEVEL2 to disable this behavior is not ideal, because in some
cases it's good to have BPF_LOG_LEVEL2 per-instruction register dump
verbosity, but still have only relevant verifier branches logged. But for this
patch, I didn't want to add any new flags. It might be worth-while to just
rethink how BPF verifier logging is performed and requested and streamline it
a bit. But this trimming of successfully verified branches seems to be useful
and a good default behavior.
To test this, I modified runqslower slightly to introduce read of
uninitialized stack variable. Log (**truncated in the middle** to save many
lines out of this commit message) BEFORE this change:
; int handle__sched_switch(u64 *ctx)
0: (bf) r6 = r1
; struct task_struct *prev = (struct task_struct *)ctx[1];
1: (79) r1 = *(u64 *)(r6 +8)
func 'sched_switch' arg1 has btf_id 151 type STRUCT 'task_struct'
2: (b7) r2 = 0
; struct event event = {};
3: (7b) *(u64 *)(r10 -24) = r2
last_idx 3 first_idx 0
regs=4 stack=0 before 2: (b7) r2 = 0
4: (7b) *(u64 *)(r10 -32) = r2
5: (7b) *(u64 *)(r10 -40) = r2
6: (7b) *(u64 *)(r10 -48) = r2
; if (prev->state == TASK_RUNNING)
[ ... instruction dump from insn #7 through #50 are cut out ... ]
51: (b7) r2 = 16
52: (85) call bpf_get_current_comm#16
last_idx 52 first_idx 42
regs=4 stack=0 before 51: (b7) r2 = 16
; bpf_perf_event_output(ctx, &events, BPF_F_CURRENT_CPU,
53: (bf) r1 = r6
54: (18) r2 = 0xffff8881f3868800
56: (18) r3 = 0xffffffff
58: (bf) r4 = r7
59: (b7) r5 = 32
60: (85) call bpf_perf_event_output#25
last_idx 60 first_idx 53
regs=20 stack=0 before 59: (b7) r5 = 32
61: (bf) r2 = r10
; event.pid = pid;
62: (07) r2 += -16
; bpf_map_delete_elem(&start, &pid);
63: (18) r1 = 0xffff8881f3868000
65: (85) call bpf_map_delete_elem#3
; }
66: (b7) r0 = 0
67: (95) exit
from 44 to 66: safe
from 34 to 66: safe
from 11 to 28: R1_w=inv0 R2_w=inv0 R6_w=ctx(id=0,off=0,imm=0) R10=fp0 fp-8=mmmm???? fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
; bpf_map_update_elem(&start, &pid, &ts, 0);
28: (bf) r2 = r10
;
29: (07) r2 += -16
; tsp = bpf_map_lookup_elem(&start, &pid);
30: (18) r1 = 0xffff8881f3868000
32: (85) call bpf_map_lookup_elem#1
invalid indirect read from stack off -16+0 size 4
processed 65 insns (limit 1000000) max_states_per_insn 1 total_states 5 peak_states 5 mark_read 4
Notice how there is a successful code path from instruction 0 through 67, few
successfully verified jumps (44->66, 34->66), and only after that 11->28 jump
plus error on instruction #32.
AFTER this change (full verifier log, **no truncation**):
; int handle__sched_switch(u64 *ctx)
0: (bf) r6 = r1
; struct task_struct *prev = (struct task_struct *)ctx[1];
1: (79) r1 = *(u64 *)(r6 +8)
func 'sched_switch' arg1 has btf_id 151 type STRUCT 'task_struct'
2: (b7) r2 = 0
; struct event event = {};
3: (7b) *(u64 *)(r10 -24) = r2
last_idx 3 first_idx 0
regs=4 stack=0 before 2: (b7) r2 = 0
4: (7b) *(u64 *)(r10 -32) = r2
5: (7b) *(u64 *)(r10 -40) = r2
6: (7b) *(u64 *)(r10 -48) = r2
; if (prev->state == TASK_RUNNING)
7: (79) r2 = *(u64 *)(r1 +16)
; if (prev->state == TASK_RUNNING)
8: (55) if r2 != 0x0 goto pc+19
R1_w=ptr_task_struct(id=0,off=0,imm=0) R2_w=inv0 R6_w=ctx(id=0,off=0,imm=0) R10=fp0 fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
; trace_enqueue(prev->tgid, prev->pid);
9: (61) r1 = *(u32 *)(r1 +1184)
10: (63) *(u32 *)(r10 -4) = r1
; if (!pid || (targ_pid && targ_pid != pid))
11: (15) if r1 == 0x0 goto pc+16
from 11 to 28: R1_w=inv0 R2_w=inv0 R6_w=ctx(id=0,off=0,imm=0) R10=fp0 fp-8=mmmm???? fp-24_w=00000000 fp-32_w=00000000 fp-40_w=00000000 fp-48_w=00000000
; bpf_map_update_elem(&start, &pid, &ts, 0);
28: (bf) r2 = r10
;
29: (07) r2 += -16
; tsp = bpf_map_lookup_elem(&start, &pid);
30: (18) r1 = 0xffff8881db3ce800
32: (85) call bpf_map_lookup_elem#1
invalid indirect read from stack off -16+0 size 4
processed 65 insns (limit 1000000) max_states_per_insn 1 total_states 5 peak_states 5 mark_read 4
Notice how in this case, there are 0-11 instructions + jump from 11 to
28 is recorded + 28-32 instructions with error on insn #32.
test_verifier test runner was updated to specify BPF_LOG_LEVEL2 for
VERBOSE_ACCEPT expected result due to potentially "incomplete" success verbose
log at BPF_LOG_LEVEL1.
On success, verbose log will only have a summary of number of processed
instructions, etc, but no branch tracing log. Having just a last succesful
branch tracing seemed weird and confusing. Having small and clean summary log
in success case seems quite logical and nice, though.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200423195850.1259827-1-andriin@fb.com
On a device like a cellphone which is constantly suspending
and resuming CLOCK_MONOTONIC is not particularly useful for
keeping track of or reacting to external network events.
Instead you want to use CLOCK_BOOTTIME.
Hence add bpf_ktime_get_boot_ns() as a mirror of bpf_ktime_get_ns()
based around CLOCK_BOOTTIME instead of CLOCK_MONOTONIC.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The following error was shown when a bpf program was compiled without
vmlinux.h auto-generated from BTF:
# clang -I./linux/tools/lib/ -I/lib/modules/$(uname -r)/build/include/ \
-O2 -Wall -target bpf -emit-llvm -c bpf_prog.c -o bpf_prog.bc
...
In file included from linux/tools/lib/bpf/bpf_helpers.h:5:
linux/tools/lib/bpf/bpf_helper_defs.h:56:82: error: unknown type name '__u64'
...
It seems that bpf programs are intended for being built together with
the vmlinux.h (which will have all the __u64 and other typedefs). But
users may mistakenly think "include <linux/types.h>" is missing
because the vmlinux.h is not common for non-bpf developers. IMO, an
explicit comment therefore should be added to bpf_helpers.h as this
patch shows.
Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/1587427527-29399-1-git-send-email-komachi.yoshiki@gmail.com
Currently the following prog types don't fall back to bpf_base_func_proto()
(instead they have cgroup_base_func_proto which has a limited set of
helpers from bpf_base_func_proto):
* BPF_PROG_TYPE_CGROUP_DEVICE
* BPF_PROG_TYPE_CGROUP_SYSCTL
* BPF_PROG_TYPE_CGROUP_SOCKOPT
I don't see any specific reason why we shouldn't use bpf_base_func_proto(),
every other type of program (except bpf-lirc and, understandably, tracing)
use it, so let's fall back to bpf_base_func_proto for those prog types
as well.
This basically boils down to adding access to the following helpers:
* BPF_FUNC_get_prandom_u32
* BPF_FUNC_get_smp_processor_id
* BPF_FUNC_get_numa_node_id
* BPF_FUNC_tail_call
* BPF_FUNC_ktime_get_ns
* BPF_FUNC_spin_lock (CAP_SYS_ADMIN)
* BPF_FUNC_spin_unlock (CAP_SYS_ADMIN)
* BPF_FUNC_jiffies64 (CAP_SYS_ADMIN)
I've also added bpf_perf_event_output() because it's really handy for
logging and debugging.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200420174610.77494-1-sdf@google.com
Randy reported that objtool got stuck in an infinite loop when
processing drivers/i2c/busses/i2c-parport.o. It was caused by the
following code:
00000000000001fd <line_set>:
1fd: 48 b8 00 00 00 00 00 movabs $0x0,%rax
204: 00 00 00
1ff: R_X86_64_64 .rodata-0x8
207: 41 55 push %r13
209: 41 89 f5 mov %esi,%r13d
20c: 41 54 push %r12
20e: 49 89 fc mov %rdi,%r12
211: 55 push %rbp
212: 48 89 d5 mov %rdx,%rbp
215: 53 push %rbx
216: 0f b6 5a 01 movzbl 0x1(%rdx),%ebx
21a: 48 8d 34 dd 00 00 00 lea 0x0(,%rbx,8),%rsi
221: 00
21e: R_X86_64_32S .rodata
222: 48 89 f1 mov %rsi,%rcx
225: 48 29 c1 sub %rax,%rcx
find_jump_table() saw the .rodata reference and tried to find a jump
table associated with it (though there wasn't one). The -0x8 rela
addend is unusual. It caused find_jump_table() to send a negative
table_offset (unsigned 0xfffffffffffffff8) to find_rela_by_dest().
The negative offset should have been harmless, but it actually threw
for_offset_range() for a loop... literally. When the mask value got
incremented past the end value, it also wrapped to zero, causing the
loop exit condition to remain true forever.
Prevent this scenario from happening by ensuring the incremented value
is always >= the starting value.
Fixes: 74b873e49d ("objtool: Optimize find_rela_by_dest_range()")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Julien Thierry <jthierry@redhat.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/02b719674b031800b61e33c30b2e823183627c19.1587842122.git.jpoimboe@redhat.com
When the current frame address (CFA) is stored on the stack (i.e.,
cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack
offset when there are subsequent pushes or pops. This results in bad
ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the
previous stack pointer on the stack and does a subsequent push.
This fixes the following unwinder warning:
WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0
Fixes: 627fce1480 ("objtool: Add ORC unwind table generation")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Reported-by: Dave Jones <dsj@fb.com>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Joe Mario <jmario@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.com
Pull networking fixes from David Miller:
1) Fix memory leak in netfilter flowtable, from Roi Dayan.
2) Ref-count leaks in netrom and tipc, from Xiyu Yang.
3) Fix warning when mptcp socket is never accepted before close, from
Florian Westphal.
4) Missed locking in ovs_ct_exit(), from Tonghao Zhang.
5) Fix large delays during PTP synchornization in cxgb4, from Rahul
Lakkireddy.
6) team_mode_get() can hang, from Taehee Yoo.
7) Need to use kvzalloc() when allocating fw tracer in mlx5 driver,
from Niklas Schnelle.
8) Fix handling of bpf XADD on BTF memory, from Jann Horn.
9) Fix BPF_STX/BPF_B encoding in x86 bpf jit, from Luke Nelson.
10) Missing queue memory release in iwlwifi pcie code, from Johannes
Berg.
11) Fix NULL deref in macvlan device event, from Taehee Yoo.
12) Initialize lan87xx phy correctly, from Yuiko Oshino.
13) Fix looping between VRF and XFRM lookups, from David Ahern.
14) etf packet scheduler assumes all sockets are full sockets, which is
not necessarily true. From Eric Dumazet.
15) Fix mptcp data_fin handling in RX path, from Paolo Abeni.
16) fib_select_default() needs to handle nexthop objects, from David
Ahern.
17) Use GFP_ATOMIC under spinlock in mac80211_hwsim, from Wei Yongjun.
18) vxlan and geneve use wrong nlattr array, from Sabrina Dubroca.
19) Correct rx/tx stats in bcmgenet driver, from Doug Berger.
20) BPF_LDX zero-extension is encoded improperly in x86_32 bpf jit, fix
from Luke Nelson.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (100 commits)
selftests/bpf: Fix a couple of broken test_btf cases
tools/runqslower: Ensure own vmlinux.h is picked up first
bpf: Make bpf_link_fops static
bpftool: Respect the -d option in struct_ops cmd
selftests/bpf: Add test for freplace program with expected_attach_type
bpf: Propagate expected_attach_type when verifying freplace programs
bpf: Fix leak in LINK_UPDATE and enforce empty old_prog_fd
bpf, x86_32: Fix logic error in BPF_LDX zero-extension
bpf, x86_32: Fix clobbering of dst for BPF_JSET
bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension
bpf: Fix reStructuredText markup
net: systemport: suppress warnings on failed Rx SKB allocations
net: bcmgenet: suppress warnings on failed Rx SKB allocations
macsec: avoid to set wrong mtu
mac80211: sta_info: Add lockdep condition for RCU list usage
mac80211: populate debugfs only after cfg80211 init
net: bcmgenet: correct per TX/RX ring statistics
net: meth: remove spurious copyright text
net: phy: bcm84881: clear settings on link down
chcr: Fix CPU hard lockup
...
Alexei Starovoitov says:
====================
pull-request: bpf 2020-04-24
The following pull-request contains BPF updates for your *net* tree.
We've added 17 non-merge commits during the last 5 day(s) which contain
a total of 19 files changed, 203 insertions(+), 85 deletions(-).
The main changes are:
1) link_update fix, from Andrii.
2) libbpf get_xdp_id fix, from David.
3) xadd verifier fix, from Jann.
4) x86-32 JIT fixes, from Luke and Wang.
5) test_btf fix, from Stanislav.
6) freplace verifier fix, from Toke.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Reorder include paths to ensure that runqslower sources are picking up
vmlinux.h, generated by runqslower's own Makefile. When runqslower is built
from selftests/bpf, due to current -I$(BPF_INCLUDE) -I$(OUTPUT) ordering, it
might pick up not-yet-complete vmlinux.h, generated by selftests Makefile,
which could lead to compilation errors like [0]. So ensure that -I$(OUTPUT)
goes first and rely on runqslower's Makefile own dependency chain to ensure
vmlinux.h is properly completed before source code relying on it is compiled.
[0] https://travis-ci.org/github/libbpf/libbpf/jobs/677905925
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200422012407.176303-1-andriin@fb.com
In the prog cmd, the "-d" option turns on the verifier log.
This is missed in the "struct_ops" cmd and this patch fixes it.
Fixes: 65c9362859 ("bpftool: Add struct_ops support")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200424182911.1259355-1-kafai@fb.com
This adds a new selftest that tests the ability to attach an freplace
program to a program type that relies on the expected_attach_type of the
target program to pass verification.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158773526831.293902.16011743438619684815.stgit@toke.dk
Restore an optimization related to asynchronous suspend and resume of
devices during system-wide power transitions that was disabled by
mistake (Kai-Heng Feng) and update the pm-graph suite of power
management utilities (Todd Brandt).
-----BEGIN PGP SIGNATURE-----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=pHmC
-----END PGP SIGNATURE-----
Merge tag 'pm-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Restore an optimization related to asynchronous suspend and resume of
devices during system-wide power transitions that was disabled by
mistake (Kai-Heng Feng) and update the pm-graph suite of power
management utilities (Todd Brandt)"
* tag 'pm-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: core: Switch back to async_schedule_dev()
pm-graph v5.6
It is possible to get multiple records from trace during test and then more
than 4 arguments are assigned to ARGS. This situation results in the failure
of kprobe_args_type.tc. For example:
-----------------------------------------------------------
grep testprobe trace
ftracetest-5902 [001] d... 111195.682227: testprobe: (_do_fork+0x0/0x460) arg1=334823024 arg2=334823024 arg3=0x13f4fe70 arg4=7
pmlogger-5949 [000] d... 111195.709898: testprobe: (_do_fork+0x0/0x460) arg1=345308784 arg2=345308784 arg3=0x1494fe70 arg4=7
grep testprobe trace
sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'
ARGS='334823024 334823024 0x13f4fe70 7
345308784 345308784 0x1494fe70 7'
-----------------------------------------------------------
We don't care which process calls do_fork so just check the first record to
fix the issue.
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add build/cross-build dependency check script kselftest_deps.sh
This script does the following:
Usage: ./kselftest_deps.sh -[p] <compiler> [test_name]
kselftest_deps.sh [-p] gcc
kselftest_deps.sh [-p] gcc vm
kselftest_deps.sh [-p] aarch64-linux-gnu-gcc
kselftest_deps.sh [-p] aarch64-linux-gnu-gcc vm
- Should be run in selftests directory in the kernel repo.
- Checks if Kselftests can be built/cross-built on a system.
- Parses all test/sub-test Makefile to find library dependencies.
- Runs compile test on a trivial C file with LDLIBS specified
in the test Makefiles to identify missing library dependencies.
- Prints suggested target list for a system filtering out tests
failed the build dependency check from the TARGETS in Selftests
the main Makefile when optional -p is specified.
- Prints pass/fail dependency check for each tests/sub-test.
- Prints pass/fail targets and libraries.
- Default: runs dependency checks on all tests.
- Optional test name can be specified to check dependencies for it.
To make LDLIBS parsing easier
- change gpio and memfd Makefiles to use the same temporary variable used
to find and add libraries to LDLIBS.
- simlify LDLIBS append logic in intel_pstate/Makefile.
Results from run on x86_64 system (trimmed detailed pass/fail list):
========================================================
Kselftest Dependency Check for [./kselftest_deps.sh gcc ] results...
========================================================
Checked tests defining LDLIBS dependencies
--------------------------------------------------------
Total tests with Dependencies:
55 Pass: 53 Fail: 2
--------------------------------------------------------
Targets passed build dependency check on system:
bpf capabilities filesystems futex gpio intel_pstate membarrier memfd
mqueue net powerpc ptp rseq rtc safesetid timens timers vDSO vm
--------------------------------------------------------
FAIL: netfilter/Makefile dependency check: -lmnl
FAIL: gpio/Makefile dependency check: -lmount
--------------------------------------------------------
Targets failed build dependency check on system:
gpio netfilter
--------------------------------------------------------
Missing libraries system
-lmnl -lmount
--------------------------------------------------------
========================================================
Results from run on x86_64 system with aarch64-linux-gnu-gcc:
(trimmed detailed pass/fail list):
========================================================
Kselftest Dependency Check for [./kselftest_deps.sh aarch64-linux-gnu-gcc ]
results...
========================================================
Checked tests defining LDLIBS dependencies
--------------------------------------------------------
Total tests with Dependencies:
55 Pass: 41 Fail: 14
--------------------------------------------------------
Targets failed build dependency check on system:
bpf capabilities filesystems futex gpio intel_pstate membarrier memfd
mqueue net powerpc ptp rseq rtc timens timers vDSO vm
--------------------------------------------------------
--------------------------------------------------------
Targets failed build dependency check on system:
bpf capabilities gpio memfd mqueue net netfilter safesetid vm
--------------------------------------------------------
Missing libraries system
-lcap -lcap-ng -lelf -lfuse -lmnl -lmount -lnuma -lpopt -lz
--------------------------------------------------------
========================================================
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Without CONFIG_DYNAMIC_FTRACE, some tests get failure because required
filter files(set_ftrace_filter/available_filter_functions/stack_trace_filter)
are missing. So implement check_filter_file() and make all related tests
check required filter files by it.
BTW: set_ftrace_filter and available_filter_functions are introduced together
so just check either of them.
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
To control degree of parallelism of the synthesize_mmap() code which
is scanning /proc/PID/task/PID/maps and can be time consuming.
Mimic perf top way of handling the option.
If not specified will default to 1 thread, i.e. default behavior before
this option.
On a desktop computer the processing of /proc/PID/task/PID/maps isn't
slow enough to warrant parallel processing and the thread creation has
some cost - hence the default of 1. On a loaded server with
>100 cores it is possible to see synthesis times in the order of
seconds and in this case having the option is desirable.
As the processing is a synchronization point, it is legitimate to worry if
Amdahl's law will apply to this patch. Profiling with this patch in
place:
https://lore.kernel.org/lkml/20200415054050.31645-4-irogers@google.com/
shows:
...
- 32.59% __perf_event__synthesize_threads
- 32.54% __event__synthesize_thread
+ 22.13% perf_event__synthesize_mmap_events
+ 6.68% perf_event__get_comm_ids.constprop.0
+ 1.49% process_synthesized_event
+ 1.29% __GI___readdir64
+ 0.60% __opendir
...
That is the processing is 1.49% of execution time and there is plenty to
make parallel. This is shown in the benchmark in this patch:
https://lore.kernel.org/lkml/20200415054050.31645-2-irogers@google.com/
Computing performance of multi threaded perf event synthesis by
synthesizing events on CPU 0:
Number of synthesis threads: 1
Average synthesis took: 127729.000 usec (+- 3372.880 usec)
Average num. events: 21548.600 (+- 0.306)
Average time per event 5.927 usec
Number of synthesis threads: 2
Average synthesis took: 88863.500 usec (+- 385.168 usec)
Average num. events: 21552.800 (+- 0.327)
Average time per event 4.123 usec
Number of synthesis threads: 3
Average synthesis took: 83257.400 usec (+- 348.617 usec)
Average num. events: 21553.200 (+- 0.327)
Average time per event 3.863 usec
Number of synthesis threads: 4
Average synthesis took: 75093.000 usec (+- 422.978 usec)
Average num. events: 21554.200 (+- 0.200)
Average time per event 3.484 usec
Number of synthesis threads: 5
Average synthesis took: 64896.600 usec (+- 353.348 usec)
Average num. events: 21558.000 (+- 0.000)
Average time per event 3.010 usec
Number of synthesis threads: 6
Average synthesis took: 59210.200 usec (+- 342.890 usec)
Average num. events: 21560.000 (+- 0.000)
Average time per event 2.746 usec
Number of synthesis threads: 7
Average synthesis took: 54093.900 usec (+- 306.247 usec)
Average num. events: 21562.000 (+- 0.000)
Average time per event 2.509 usec
Number of synthesis threads: 8
Average synthesis took: 48938.700 usec (+- 341.732 usec)
Average num. events: 21564.000 (+- 0.000)
Average time per event 2.269 usec
Where average time per synthesized event goes from 5.927 usec with 1
thread to 2.269 usec with 8. This isn't a linear speed up as not all of
synthesize code has been made parallel. If the synthesis time was about
10 seconds then using 8 threads may bring this down to less than 4.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tony Jones <tonyj@suse.de>
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: http://lore.kernel.org/lkml/20200422155038.9380-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 2d4f27999b ("perf data: Add global path holder") missed path
conversion in tests/topology.c, causing the "Session topology" testcase
to "hang" (waits forever for input from stdin) when doing "ssh $VM perf
test".
Can be reproduced by running "cat | perf test topo", and crashed by
replacing cat with true:
$ true | perf test -v topo
40: Session topology :
--- start ---
test child forked, pid 3638
templ file: /tmp/perf-test-QPvAch
incompatible file format
incompatible file format (rerun with -v to learn more)
free(): invalid pointer
test child interrupted
---- end ----
Session topology: FAILED!
Committer testing:
Reproduced the above result before the patch and after it is back
working:
# true | perf test -v topo
41: Session topology :
--- start ---
test child forked, pid 19374
templ file: /tmp/perf-test-YOTEQg
CPU 0, core 0, socket 0
CPU 1, core 1, socket 0
CPU 2, core 2, socket 0
CPU 3, core 3, socket 0
CPU 4, core 0, socket 0
CPU 5, core 1, socket 0
CPU 6, core 2, socket 0
CPU 7, core 3, socket 0
test child finished with 0
---- end ----
Session topology: Ok
#
Fixes: 2d4f27999b ("perf data: Add global path holder")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200423115341.562782-1-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For interval mode, the metric is printed after the '#' character if it
exists. But it's not calculated by the counts generated in this
interval.
See the following examples:
root@kbl-ppc:~# perf stat -M CPI -I1000 --interval-count 2
# time counts unit events
1.000422803 764,809 inst_retired.any # 2.9 CPI
1.000422803 2,234,932 cycles
2.001464585 1,960,061 inst_retired.any # 1.6 CPI
2.001464585 4,022,591 cycles
The second CPI should not be 1.6 (4,022,591/1,960,061 is 2.1)
root@kbl-ppc:~# perf stat -e cycles,instructions -I1000 --interval-count 2
# time counts unit events
1.000429493 2,869,311 cycles
1.000429493 816,875 instructions # 0.28 insn per cycle
2.001516426 9,260,973 cycles
2.001516426 5,250,634 instructions # 0.87 insn per cycle
The second 'insn per cycle' should not be 0.87 (5,250,634/9,260,973 is
0.57).
The current code uses a global variable 'rt_stat' for tracking and
updating the std dev of runtime stat. Unlike the counts, 'rt_stat' is not
reset for interval. While the counts are reset for interval.
perf_stat_process_counter()
{
if (config->interval)
init_stats(ps->res_stats);
}
So for interval mode, the 'rt_stat' variable should be reset too.
This patch resets 'rt_stat' before read_counters(), so the runtime stat
is only calculated by the counts generated in this interval.
With this patch:
root@kbl-ppc:~# perf stat -M CPI -I1000 --interval-count 2
# time counts unit events
1.000420924 2,408,818 inst_retired.any # 2.1 CPI
1.000420924 5,010,111 cycles
2.001448579 2,798,407 inst_retired.any # 1.6 CPI
2.001448579 4,599,861 cycles
root@kbl-ppc:~# perf stat -e cycles,instructions -I1000 --interval-count 2
# time counts unit events
1.000428555 2,769,714 cycles
1.000428555 774,462 instructions # 0.28 insn per cycle
2.001471562 3,595,904 cycles
2.001471562 1,243,703 instructions # 0.35 insn per cycle
Now the second 'insn per cycle' and CPI are calculated by the counts
generated in this interval.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-By: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200420145417.6864-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mostly straightforward constification, except that WARN_FUNC()
needs a writable pointer while we have read-only pointers,
so deflect this to WARN().
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200422103205.61900-4-mingo@kernel.org
In preparation to parallelize certain parts of objtool, map out which uses
of various data structures are read-only vs. read-write.
As a first step constify 'struct elf' pointer passing, most of the secondary
uses of it in find_symbol_*() methods are read-only.
Also, while at it, better group the 'struct elf' handling methods in elf.h.
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20200422103205.61900-2-mingo@kernel.org
The commit in the Fixes tag changed get_xdp_id to only return prog_id
if flags is 0, but there are other XDP flags than the modes - e.g.,
XDP_FLAGS_UPDATE_IF_NOEXIST. Since the intention was only to look at
MODE flags, clear other ones before checking if flags is 0.
Fixes: f07cbad297 ("libbpf: Fix bpf_get_link_xdp_id flags handling")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrey Ignatov <rdna@fb.com>
Add nodad when adding IPv6 addresses and remove the sleep.
A recent change to iproute2 moved the 'pref medium' to the prefix
(where it belongs). Change the expected route check to strip
'pref medium' to be compatible with old and new iproute2.
Add IPv4 runtime test with an IPv6 address as the gateway in
the default route.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a self-test for the IPv6 dsfield munge that iproute2 will support.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the pedit_dsfield forwarding selftest with coverage of "pedit ex
munge ip6 dsfield set".
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests for vrf and xfrms with a second round after adding a
qdisc. There are a few known problems documented with the test
cases that fail. The fix is non-trivial; will come back to it
when time allows.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sometimes, WARN_FUNC() and other users of symbol_by_offset() will
associate the first instruction of a symbol with the symbol preceding
it. This is because symbol->offset + symbol->len is already outside of
the symbol's range.
Fixes: 2a362ecc3e ("objtool: Optimize find_symbol_*() and read_symbols()")
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
fib_tests is spewing errors:
...
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
ping: connect: Network is unreachable
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
...
Each test entry in fib_tests is supposed to do its own setup and
cleanup. Right now the $IP commands in fib_suppress_test are
failing because there is no ns1. Add the setup/cleanup and logging
expected for each test.
Fixes: ca7a03c417 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule")
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the code comments in perf_stat_process_counter() say, we calculate
counter's data every interval, and the display code shows ps->res_stats
avg value. We need to zero the stats for interval mode.
But the current code only zeros the res_stats[0], it doesn't zero the
res_stats[1] and res_stats[2], which are for ena and run of counter.
This patch zeros the whole res_stats[] for interval mode.
Fixes: 51fd2df1e8 ("perf stat: Fix interval output values")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200409070755.17261-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This kselftest update for Linux 5.7-rc3 consists of fixes to runner
scripts and individual test run-time bugs. Includes fixes to tpm2
and memfd test run-time regressions.
-----BEGIN PGP SIGNATURE-----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=6l5V
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This consists of fixes to runner scripts and individual test run-time
bugs. Includes fixes to tpm2 and memfd test run-time regressions"
* tag 'linux-kselftest-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ipc: Fix test failure seen after initial test run
Revert "Kernel selftests: tpm2: check for tpm support"
selftests/ftrace: Add CONFIG_SAMPLE_FTRACE_DIRECT=m kconfig
selftests/seccomp: allow clock_nanosleep instead of nanosleep
kselftest/runner: allow to properly deliver signals to tests
selftests/harness: fix spelling mistake "SIGARLM" -> "SIGALRM"
selftests: Fix memfd test run-time regression
selftests: vm: Fix 64-bit test builds for powerpc64le
selftests: vm: Do not override definition of ARCH
The hidepid parameter values are becoming more and more and it becomes
difficult to remember what each new magic number means.
Backward compatibility is preserved since it is possible to specify
numerical value for the hidepid parameter. This does not break the
fsconfig since it is not possible to specify a numerical value through
it. All numeric values are converted to a string. The type
FSCONFIG_SET_BINARY cannot be used to indicate a numerical value.
Selftest has been added to verify this behavior.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
This patch allows to have multiple procfs instances inside the
same pid namespace. The aim here is lightweight sandboxes, and to allow
that we have to modernize procfs internals.
1) The main aim of this work is to have on embedded systems one
supervisor for apps. Right now we have some lightweight sandbox support,
however if we create pid namespacess we have to manages all the
processes inside too, where our goal is to be able to run a bunch of
apps each one inside its own mount namespace without being able to
notice each other. We only want to use mount namespaces, and we want
procfs to behave more like a real mount point.
2) Linux Security Modules have multiple ptrace paths inside some
subsystems, however inside procfs, the implementation does not guarantee
that the ptrace() check which triggers the security_ptrace_check() hook
will always run. We have the 'hidepid' mount option that can be used to
force the ptrace_may_access() check inside has_pid_permissions() to run.
The problem is that 'hidepid' is per pid namespace and not attached to
the mount point, any remount or modification of 'hidepid' will propagate
to all other procfs mounts.
This also does not allow to support Yama LSM easily in desktop and user
sessions. Yama ptrace scope which restricts ptrace and some other
syscalls to be allowed only on inferiors, can be updated to have a
per-task context, where the context will be inherited during fork(),
clone() and preserved across execve(). If we support multiple private
procfs instances, then we may force the ptrace_may_access() on
/proc/<pids>/ to always run inside that new procfs instances. This will
allow to specifiy on user sessions if we should populate procfs with
pids that the user can ptrace or not.
By using Yama ptrace scope, some restricted users will only be able to see
inferiors inside /proc, they won't even be able to see their other
processes. Some software like Chromium, Firefox's crash handler, Wine
and others are already using Yama to restrict which processes can be
ptracable. With this change this will give the possibility to restrict
/proc/<pids>/ but more importantly this will give desktop users a
generic and usuable way to specifiy which users should see all processes
and which users can not.
Side notes:
* This covers the lack of seccomp where it is not able to parse
arguments, it is easy to install a seccomp filter on direct syscalls
that operate on pids, however /proc/<pid>/ is a Linux ABI using
filesystem syscalls. With this change LSMs should be able to analyze
open/read/write/close...
In the new patch set version I removed the 'newinstance' option
as suggested by Eric W. Biederman.
Selftest has been added to verify new behavior.
Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
al->sym may be NULL given current if conditions and may cause a segv.
Fixes: d2bedb7863 ("perf script: Allow --symbol to accept hexadecimal addresses")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200421004329.43109-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix div-by-zero if runtime is zero:
$ perf bench futex hash --runtime=0
# Running 'futex/hash' benchmark:
Run summary [PID 12090]: 4 threads, each operating on 1024 [private] futexes for 0 secs.
Floating point exception (core dumped)
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200417132330.119407-4-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not bother with close() if fd is not valid, just to silence valgrind:
$ valgrind ./perf script
==59169== Memcheck, a memory error detector
==59169== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
==59169== Using Valgrind-3.14.0 and LibVEX; rerun with -h for copyright info
==59169== Command: ./perf script
==59169==
==59169== Warning: invalid file descriptor -1 in syscall close()
==59169== Warning: invalid file descriptor -1 in syscall close()
==59169== Warning: invalid file descriptor -1 in syscall close()
==59169== Warning: invalid file descriptor -1 in syscall close()
==59169== Warning: invalid file descriptor -1 in syscall close()
==59169== Warning: invalid file descriptor -1 in syscall close()
==59169== Warning: invalid file descriptor -1 in syscall close()
==59169== Warning: invalid file descriptor -1 in syscall close()
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200417132330.119407-1-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kernel + tools/perf:
Alexey Budankov:
- Introduce CAP_PERFMON to kernel and user space.
callchains:
Adrian Hunter:
- Allow using Intel PT to synthesize callchains for regular events.
Kan Liang:
- Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
perf script:
Andreas Gerstmayr:
- Add flamegraph.py script
BPF:
Jiri Olsa:
- Synthesize bpf_trampoline/dispatcher ksymbol events.
perf stat:
Arnaldo Carvalho de Melo:
- Honour --timeout for forked workloads.
Stephane Eranian:
- Force error in fallback on :k events, to avoid counting nothing when
the user asks for kernel events but is not allowed to.
perf bench:
Ian Rogers:
- Add event synthesis benchmark.
tools api fs:
Stephane Eranian:
- Make xxx__mountpoint() more scalable
libtraceevent:
He Zhe:
- Handle return value of asprintf.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXp2LlQAKCRCyPKLppCJ+
J95oAP0ZihVUhESv/gdeX0IDE5g6Rd2V6LNcRj+jb7gX9NlQkwD/UfS454WV1ftQ
qTwrkKPzY/5Tm2cLuVE7r7fJ6naDHgU=
=FHm4
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.8-20200420' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core fixes and improvements from Arnaldo Carvalho de Melo:
kernel + tools/perf:
Alexey Budankov:
- Introduce CAP_PERFMON to kernel and user space.
callchains:
Adrian Hunter:
- Allow using Intel PT to synthesize callchains for regular events.
Kan Liang:
- Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
perf script:
Andreas Gerstmayr:
- Add flamegraph.py script
BPF:
Jiri Olsa:
- Synthesize bpf_trampoline/dispatcher ksymbol events.
perf stat:
Arnaldo Carvalho de Melo:
- Honour --timeout for forked workloads.
Stephane Eranian:
- Force error in fallback on :k events, to avoid counting nothing when
the user asks for kernel events but is not allowed to.
perf bench:
Ian Rogers:
- Add event synthesis benchmark.
tools api fs:
Stephane Eranian:
- Make xxx__mountpoint() more scalable
libtraceevent:
He Zhe:
- Handle return value of asprintf.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Consider all of .entry.text as noinstr. This gets us coverage across
the PTI boundary. While we could add everything .noinstr.text into
.entry.text that would bloat the amount of code in the user mapping.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.525037514@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In preparation of further changes, once again break out the loop body.
No functional changes intended.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.405863817@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
validate_functions() iterates all sections their symbols; this is
pointless to do for !text sections as they won't have instructions
anyway.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.346582716@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In preparation for find_insn_containing(), change insn_hash to use
sec_offset_hash().
This actually reduces runtime; probably because mixing in the section
index reduces the collisions due to text sections all starting their
instructions at offset 0.
Runtime on vmlinux.o from 3.1 to 2.5 seconds.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.227240432@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When doing kbuild tests to see if the objtool changes affected those I
found that there was a measurable regression:
pre post
real 1m13.594 1m16.488s
user 34m58.246s 35m23.947s
sys 4m0.393s 4m27.312s
Perf showed that for small files the increased hash-table sizes were a
measurable difference. Since we already have -l "vmlinux" to
distinguish between the modes, make it also use a smaller portion of
the hash-tables.
This flips it into a small win:
real 1m14.143s
user 34m49.292s
sys 3m44.746s
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.167588731@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Validate that any call out of .noinstr.text is in between
instr_begin() and instr_end() annotations.
This annotation is useful to ensure correct behaviour wrt tracing
sensitive code like entry/exit and idle code. When we run code in a
sensitive context we want a guarantee no unknown code is ran.
Since this validation relies on knowing the section of call
destination symbols, we must run it on vmlinux.o instead of on
individual object files.
Add two options:
-d/--duplicate "duplicate validation for vmlinux"
-l/--vmlinux "vmlinux.o validation"
Where the latter auto-detects when objname ends with "vmlinux.o" and
the former will force all validations, also those already done on
!vmlinux object files.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.106268040@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Objtool keeps per instruction CFI state in struct insn_state and will
save/restore this where required. However, insn_state has grown some
!CFI state, and this must not be saved/restored (that would
loose/destroy state).
Fix this by moving the CFI specific parts of insn_state into struct
cfi_state.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115119.045821071@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There's going to be a new struct cfi_state, rename this one to make
place.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115118.986441913@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Normally objtool ensures a function keeps the stack layout invariant.
But there is a useful exception, it is possible to stuff the return
stack in order to 'inject' a 'call':
push $fun
ret
In this case the invariant mentioned above is violated.
Add an objtool HINT to annotate this and allow a function exit with a
modified stack frame.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115118.690601403@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Teach objtool a little more about IRET so that we can avoid using the
SAVE/RESTORE annotation. In particular, make the weird corner case in
insn->restore go away.
The purpose of that corner case is to deal with the fact that
UNWIND_HINT_RESTORE lands on the instruction after IRET, but that
instruction can end up being outside the basic block, consider:
if (cond)
sync_core()
foo();
Then the hint will land on foo(), and we'll encounter the restore
hint without ever having seen the save hint.
By teaching objtool about the arch specific exception frame size, and
assuming that any IRET in an STT_FUNC symbol is an exception frame
sized POP, we can remove the use of save/restore hints for this code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200416115118.631224674@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instruction sets can include more or less complex operations which might
not fit the currently defined set of stack_ops.
Combining more than one stack_op provides more flexibility to describe
the behaviour of an instruction. This also reduces the need to define
new stack_ops specific to a single instruction set.
Allow instruction decoders to generate multiple stack_op per
instruction.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200327152847.15294-11-jthierry@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If the prefix of section name is not '.rodata', the following
function call can never return 0.
strcmp(sec->name, C_JUMP_TABLE_SECTION)
So the name comparison is pointless, just remove it.
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Compiling with Clang and CONFIG_KASAN=y was exposing a few warnings:
call to memset() with UACCESS enabled
Document how to fix these for future travelers.
Link: https://github.com/ClangBuiltLinux/linux/issues/876
Suggested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Suggested-by: Matt Helsley <mhelsley@vmware.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some CFI definitions used by generic objtool code have no reason to vary
from one architecture to another. Keep those definitions in generic
code and move the arch-specific ones to a new arch-specific header.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The initial register state is set up by arch specific code. Use the
value the arch code has set when restoring registers from the stack.
Suggested-by: Raphael Gault <raphael.gault@arm.com>
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The .alternatives section can contain entries with no original
instructions. Objtool will currently crash when handling such an entry.
Just skip that entry, but still give a warning to discourage useless
entries.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a function fails its validation, it might leave a stale state
that will be used for the validation of other functions. That would
cause false warnings on potentially valid functions.
Reset the instruction state before the validation of each individual
function.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
POP operations are already in the code path where the destination
operand is OP_DEST_REG. There is no need to check the operand type
again.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, the check of tools files against kernel equivalent is only
done after every object file has been built. This means one might fix
build issues against outdated headers without seeing a warning about
this.
Check headers before any object is built. Also, make it part of a
FORCE'd recipe so every attempt to build objtool will report the
outdated headers (if any).
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sometimes, WARN_FUNC() and other users of symbol_by_offset() will
associate the first instruction of a symbol with the symbol preceding
it. This is because symbol->offset + symbol->len is already outside of
the symbol's range.
Fixes: 2a362ecc3e ("objtool: Optimize find_symbol_*() and read_symbols()")
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge misc fixes from Andrew Morton:
"15 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
tools/vm: fix cross-compile build
coredump: fix null pointer dereference on coredump
mm: shmem: disable interrupt when acquiring info->lock in userfaultfd_copy path
shmem: fix possible deadlocks on shmlock_user_lock
vmalloc: fix remap_vmalloc_range() bounds checks
mm/shmem: fix build without THP
mm/ksm: fix NULL pointer dereference when KSM zero page is enabled
tools/build: tweak unused value workaround
checkpatch: fix a typo in the regex for $allocFunctions
mm, gup: return EINTR when gup is interrupted by fatal signals
mm/hugetlb: fix a addressing exception caused by huge_pte_offset
MAINTAINERS: add an entry for kfifo
mm/userfaultfd: disable userfaultfd-wp on x86_32
slub: avoid redzone when choosing freepointer location
sh: fix build error in mm/init.c
Some bug fixes.
Cleanup a couple of issues that surfaced meanwhile.
Disable vhost on ARM with OABI for now - to be fixed
fully later in the cycle or in the next release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl6d6ZgPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpH3oH/0bJ6o+FiAi8xXgYqm9XXmswrZoZLahjyPay
dA7Sz5nNKVtdSGH9o0wRdcekt0SOI3ilZSkv9nwt9ep/5YzC3brf2hry+nPvMTsA
MhI3IAa7sK1vCXkftwOlx+SIeDfIwsqr+h4SCfMRxlIT0yAmOC8fl2ByT2dIbqnj
dlzwczecHI9LPUEmRWiKH/4Tj5MPZN5IeFSIAE+nA/9cl5h4qVSfYtWD3Y4VQ82g
Rv3mvVE+chaVbPxewaBZ8Y0Avti4tMyzsE0MY+dz5xfh+75hqMfygg//1osbEAbz
SiL5dDcANe8Q+QOc/BxHdj4dqpqUp1ldV+3Lge9k4lWAGnsEMEk=
=GZb2
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes and cleanups from Michael Tsirkin:
- Some bug fixes
- Cleanup a couple of issues that surfaced meanwhile
- Disable vhost on ARM with OABI for now - to be fixed fully later in
the cycle or in the next release.
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (24 commits)
vhost: disable for OABI
virtio: drop vringh.h dependency
virtio_blk: add a missing include
virtio-balloon: Avoid using the word 'report' when referring to free page hinting
virtio-balloon: make virtballoon_free_page_report() static
vdpa: fix comment of vdpa_register_device()
vdpa: make vhost, virtio depend on menu
vdpa: allow a 32 bit vq alignment
drm/virtio: fix up for include file changes
remoteproc: pull in slab.h
rpmsg: pull in slab.h
virtio_input: pull in slab.h
remoteproc: pull in slab.h
virtio-rng: pull in slab.h
virtgpu: pull in uaccess.h
tools/virtio: make asm/barrier.h self contained
tools/virtio: define aligned attribute
virtio/test: fix up after IOTLB changes
vhost: Create accessors for virtqueues private_data
vdpasim: Return status in vdpasim_get_status
...
Commit 7ed1c1901f ("tools: fix cross-compile var clobbering") moved
the setup of the CC variable to tools/scripts/Makefile.include to make
the behavior consistent across all the tools Makefiles.
As the vm tools missed the include we end up with the wrong CC in a
cross-compiling evironment.
Fixes: 7ed1c1901f (tools: fix cross-compile var clobbering)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Martin Kelly <martin@martingkelly.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200416104748.25243-1-l.stach@pengutronix.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clang has -Wself-assign enabled by default under -Wall, which always
gets -Werror'ed on this file, causing sync-compare-and-swap to be
disabled by default.
The generally-accepted way to spell "this value is intentionally
unused," is casting it to `void`. This is accepted by both GCC and
Clang with -Wall enabled: https://godbolt.org/z/qqZ9r3
Signed-off-by: George Burgess IV <gbiv@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: http://lkml.kernel.org/r/20200414195638.156123-1-gbiv@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This file is close enough to being in rst format that I didn't feel
the need to alter it in any way.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Michel Lespinasse <walken@google.com>
Link: https://lore.kernel.org/r/20200401173343.17472-1-willy@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
On AMD, the state of the VMCB is undefined after a shutdown VMEXIT. KVM
takes a very conservative approach to that and resets the guest altogether
when that happens. This causes the set_memory_region_test to fail
because the RIP is 0xfff0 (the reset vector). Restrict the RIP test
to KVM_EXIT_INTERNAL_ERROR in order to fix this.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a sample unit file as a basis for systemd integration of kvm_stat
logs.
Signed-off-by: Stefan Raspl <raspl@de.ibm.com>
Message-Id: <20200402085705.61155-4-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To integrate with logrotate, we have a signal handler that will re-open
the logfile.
Assuming we have a systemd unit file with
ExecStart=kvm_stat -dtc -s 10 -L /var/log/kvm_stat.csv
ExecReload=/bin/kill -HUP $MAINPID
and a logrotate config featuring
postrotate
/bin/systemctl reload kvm_stat.service
endscript
Then the overall flow will look like this:
(1) systemd starts kvm_stat, logging to A.
(2) At some point, logrotate runs, moving A to B.
kvm_stat continues to write to B at this point.
(3) After rotating, logrotate restarts the kvm_stat unit via systemctl.
(4) The kvm_stat unit sends a SIGHUP to kvm_stat, finally making it
switch over to writing to A again.
Note that in order to keep the structure of the cvs output in tact, we
make sure to, in contrast to the standard log format, only write the
header once at the beginning of a file. This implies that the header is
suppressed when appending to an existing file. Unlike with the standard
format, where we append to an existing file by starting out with a
header.
Signed-off-by: Stefan Raspl <raspl@de.ibm.com>
Message-Id: <20200402085705.61155-3-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running in logging mode, skip records with all zeros (=empty records)
to preserve space when logging to files.
Signed-off-by: Stefan Raspl <raspl@de.ibm.com>
Message-Id: <20200402085705.61155-2-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include a README file with the instructions to use the
testcases at selftests/powerpc/nx-gzip.
Signed-off-by: Bulent Abali <abali@us.ibm.com>
Signed-off-by: Raphael Moreira Zinsly <rzinsly@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200420205538.25181-6-rzinsly@linux.ibm.com
Include a decompression testcase for the powerpc NX-GZIP
engine.
Signed-off-by: Bulent Abali <abali@us.ibm.com>
Signed-off-by: Raphael Moreira Zinsly <rzinsly@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200420205538.25181-5-rzinsly@linux.ibm.com
Add files to be able to compress and decompress files using the
powerpc NX-GZIP engine.
Signed-off-by: Bulent Abali <abali@us.ibm.com>
Signed-off-by: Raphael Moreira Zinsly <rzinsly@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200420205538.25181-3-rzinsly@linux.ibm.com
This patch adds a test to test_verifier that writes the lower 8 bits of
R10 (aka FP) using BPF_B to an array map and reads the result back. The
expected behavior is that the result should be the same as first copying
R10 to R9, and then storing / loading the lower 8 bits of R9.
This test catches a bug that was present in the x86-64 JIT that caused
an incorrect encoding for BPF_STX BPF_B when the source operand is R10.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200418232655.23870-2-luke.r.nels@gmail.com
When check_xadd() verifies an XADD operation on a pointer to a stack slot
containing a spilled pointer, check_stack_read() verifies that the read,
which is part of XADD, is valid. However, since the placeholder value -1 is
passed as `value_regno`, check_stack_read() can only return a binary
decision and can't return the type of the value that was read. The intent
here is to verify whether the value read from the stack slot may be used as
a SCALAR_VALUE; but since check_stack_read() doesn't check the type, and
the type information is lost when check_stack_read() returns, this is not
enforced, and a malicious user can abuse XADD to leak spilled kernel
pointers.
Fix it by letting check_stack_read() verify that the value is usable as a
SCALAR_VALUE if no type information is passed to the caller.
To be able to use __is_pointer_value() in check_stack_read(), move it up.
Fix up the expected unprivileged error message for a BPF selftest that,
until now, assumed that unprivileged users can use XADD on stack-spilled
pointers. This also gives us a test for the behavior introduced in this
patch for free.
In theory, this could also be fixed by forbidding XADD on stack spills
entirely, since XADD is a locked operation (for operations on memory with
concurrency) and there can't be any concurrency on the BPF stack; but
Alexei has said that he wants to keep XADD on stack slots working to avoid
changes to the test suite [1].
The following BPF program demonstrates how to leak a BPF map pointer as an
unprivileged user using this bug:
// r7 = map_pointer
BPF_LD_MAP_FD(BPF_REG_7, small_map),
// r8 = launder(map_pointer)
BPF_STX_MEM(BPF_DW, BPF_REG_FP, BPF_REG_7, -8),
BPF_MOV64_IMM(BPF_REG_1, 0),
((struct bpf_insn) {
.code = BPF_STX | BPF_DW | BPF_XADD,
.dst_reg = BPF_REG_FP,
.src_reg = BPF_REG_1,
.off = -8
}),
BPF_LDX_MEM(BPF_DW, BPF_REG_8, BPF_REG_FP, -8),
// store r8 into map
BPF_MOV64_REG(BPF_REG_ARG1, BPF_REG_7),
BPF_MOV64_REG(BPF_REG_ARG2, BPF_REG_FP),
BPF_ALU64_IMM(BPF_ADD, BPF_REG_ARG2, -4),
BPF_ST_MEM(BPF_W, BPF_REG_ARG2, 0, 0),
BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem),
BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1),
BPF_EXIT_INSN(),
BPF_STX_MEM(BPF_DW, BPF_REG_0, BPF_REG_8, 0),
BPF_MOV64_IMM(BPF_REG_0, 0),
BPF_EXIT_INSN()
[1] https://lore.kernel.org/bpf/20200416211116.qxqcza5vo2ddnkdq@ast-mbp.dhcp.thefacebook.com/
Fixes: 17a5267067 ("bpf: verifier (add verifier core)")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200417000007.10734-1-jannh@google.com
Add PMTU discovery tests for these encapsulations:
- IPIP
- SIT, mode ip6ip
- ip6tnl, modes ip6ip6 and ipip6
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sleepgraph:
- force usage of python3 instead of using system default
- fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773)
- fix issue of platform info not being reset in -multi (logs fill up)
- change -ftop call to "pm_suspend", this is one level below state_store
- add -wificheck command to read out the current wifi device details
- change -wifi behavior to poll /proc/net/wireless for wifi connect
- add wifi reconnect time to timeline, include time in summary column
- add "fail on wifi_resume" to timeline and summary when wifi fails
- add a set of commands to collect data before/after suspend in the log
- add "-cmdinfo" command which prints out all the data collected
- check for cmd info tools at start, print found/missing in green/red
- fix kernel suspend time calculation: tool used to look for start of
pm_suspend_console, but the order has changed. latest kernel starts
with ksys_sync, use this instead
- include time spent in mem/disk in the header (same as freeze/standby)
- ignore turbostat 32-bit capability warnings
- print to result.txt when -skiphtml is used, just say result: pass
- don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back
- -multi argument supports duration as well as count: hours, minutes, seconds
- update the -multi status output to be more informative
- -maxfail sets maximum consecutive fails before a -multi run is aborted
- in -summary, ignore dmesg/ftrace/html files that are 0 size
bootgraph:
- force usage of python3 instead of using system default
README:
- add endurance testing instructions
Makefile:
- remove pycache on uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
objtool:
- Ignore the double UD2 which is emitted in BUG() when CONFIG_UBSAN_TRAP
is enabled.
- Support clang non-section symbols in objtool ORC dump
- Fix switch table detection in .text.unlikely
- Make the BP scratch register warning more robust.
x86:
- Increase microcode maximum patch size for AMD to cope with new CPUs
which have a larger patch size.
- Fix a crash in the resource control filesystem when the removal of the
default resource group is attempted.
- Preserve Code and Data Prioritization enabled state accross CPU
hotplug.
- Update split lock cpu matching to use the new X86_MATCH macros.
- Change the split lock enumeration as Intel finaly decided that the
IA32_CORE_CAPABILITIES bits are not architectural contrary to what
the SDM claims. !@#%$^!
- Add Tremont CPU models to the split lock detection cpu match.
- Add a missing static attribute to make sparse happy.
-----BEGIN PGP SIGNATURE-----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=raUm
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 and objtool fixes from Thomas Gleixner:
"A set of fixes for x86 and objtool:
objtool:
- Ignore the double UD2 which is emitted in BUG() when
CONFIG_UBSAN_TRAP is enabled.
- Support clang non-section symbols in objtool ORC dump
- Fix switch table detection in .text.unlikely
- Make the BP scratch register warning more robust.
x86:
- Increase microcode maximum patch size for AMD to cope with new CPUs
which have a larger patch size.
- Fix a crash in the resource control filesystem when the removal of
the default resource group is attempted.
- Preserve Code and Data Prioritization enabled state accross CPU
hotplug.
- Update split lock cpu matching to use the new X86_MATCH macros.
- Change the split lock enumeration as Intel finaly decided that the
IA32_CORE_CAPABILITIES bits are not architectural contrary to what
the SDM claims. !@#%$^!
- Add Tremont CPU models to the split lock detection cpu match.
- Add a missing static attribute to make sparse happy"
* tag 'x86-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/split_lock: Add Tremont family CPU models
x86/split_lock: Bits in IA32_CORE_CAPABILITIES are not architectural
x86/resctrl: Preserve CDP enable over CPU hotplug
x86/resctrl: Fix invalid attempt at removing the default resource group
x86/split_lock: Update to use X86_MATCH_INTEL_FAM6_MODEL()
x86/umip: Make umip_insns static
x86/microcode/AMD: Increase microcode PATCH_MAX_SIZE
objtool: Make BP scratch register warning more robust
objtool: Fix switch table detection in .text.unlikely
objtool: Support Clang non-section symbols in ORC generation
objtool: Support Clang non-section symbols in ORC dump
objtool: Fix CONFIG_UBSAN_TRAP unreachable warnings
- Fix the header line of perf stat output for '--metric-only --per-socket'
- Fix the python build with clang
- The usual tools UAPI header synchronization
-----BEGIN PGP SIGNATURE-----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=Dd1H
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf tooling fixes and updates from Thomas Gleixner:
- Fix the header line of perf stat output for '--metric-only --per-socket'
- Fix the python build with clang
- The usual tools UAPI header synchronization
* tag 'perf-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools headers: Synchronize linux/bits.h with the kernel sources
tools headers: Adopt verbatim copy of compiletime_assert() from kernel sources
tools headers: Update x86's syscall_64.tbl with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Update tools's copy of drm.h headers
tools headers kvm: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
tools include UAPI: Sync linux/vhost.h with the kernel sources
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
tools headers UAPI: Sync linux/mman.h with the kernel
tools headers UAPI: Sync sched.h with the kernel
tools headers: Update linux/vdso.h and grab a copy of vdso/const.h
perf stat: Fix no metric header if --per-socket and --metric-only set
perf python: Check if clang supports -fno-semantic-interposition
tools arch x86: Sync the msr-index.h copy with the kernel sources
Perf checks the duplicate entries in a callchain before adding an entry.
However the check is very slow especially with deeper call stack.
Almost ~50% elapsed time of perf report is spent on the check when the
call stack is always depth of 32.
The hist_entry__cmp() is used to compare the new entry with the old
entries. It will go through all the available sorts in the sort_list,
and call the specific cmp of each sort, which is very slow.
Actually, for most cases, there are no duplicate entries in callchain.
The symbols are usually different. It's much faster to do a quick check
for symbols first. Only do the full cmp when the symbols are exactly the
same.
The quick check is only to check symbols, not dso. Export
_sort__sym_cmp.
$ perf record --call-graph lbr ./tchain_edit_64
Without the patch
$time perf report --stdio
real 0m21.142s
user 0m21.110s
sys 0m0.033s
With the patch
$time perf report --stdio
real 0m10.977s
user 0m10.948s
sys 0m0.027s
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-18-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the LBR stitching approach, the reconstructed LBR call stack can
break the HW limitation. However, it may reconstruct invalid call stacks
in some cases, e.g. exception handing such as setjmp/longjmp. Also, it
may impact the processing time especially when the number of samples
with stitched LBRs are huge.
Add an option to enable the approach.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-17-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the LBR stitching approach, the reconstructed LBR call stack
can break the HW limitation. However, it may reconstruct invalid call
stacks in some cases, e.g. exception handing such as setjmp/longjmp.
Also, it may impact the processing time especially when the number of
samples with stitched LBRs are huge.
Add an option to enable the approach.
The option must be used with --call-graph lbr.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-16-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In LBR call stack mode, the depth of reconstructed LBR call stack limits
to the number of LBR registers.
For example, on skylake, the depth of reconstructed LBR call stack is
always <= 32.
# To display the perf.data header info, please use
# --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 6K of event 'cycles'
# Event count (approx.): 6487119731
#
# Children Self Command Shared Object Symbol
# ........ ........ ............... ..................
# ................................
99.97% 99.97% tchain_edit tchain_edit [.] f43
|
--99.64%--f11
f12
f13
f14
f15
f16
f17
f18
f19
f20
f21
f22
f23
f24
f25
f26
f27
f28
f29
f30
f31
f32
f33
f34
f35
f36
f37
f38
f39
f40
f41
f42
f43
For a call stack which is deeper than LBR limit, HW will overwrite the
LBR register with oldest branch. Only partial call stacks can be
reconstructed.
However, the overwritten LBRs may still be retrieved from previous
sample. At that moment, HW hasn't overwritten the LBR registers yet.
Perf tools can stitch those overwritten LBRs on current call stacks to
get a more complete call stack.
To determine if LBRs can be stitched, perf tools need to compare current
sample with previous sample.
- They should have identical LBR records (Same from, to and flags
values, and the same physical index of LBR registers).
- The searching starts from the base-of-stack of current sample.
Once perf determines to stitch the previous LBRs, the corresponding LBR
cursor nodes will be copied to 'lists'. The 'lists' is to track the LBR
cursor nodes which are going to be stitched.
When the stitching is over, the nodes will not be freed immediately.
They will be moved to 'free_lists'. Next stitching may reuse the space.
Both 'lists' and 'free_lists' will be freed when all samples are
processed.
Committer notes:
Fix the intel-pt.c initialization of the union with 'struct
branch_flags', that breaks the build with its unnamed union on older gcc
versions.
Uninline thread__free_stitch_list(), as it grew big and started dragging
includes to thread.h, so move it to thread.c where what it needs in
terms of headers are already there.
This fixes the build in several systems such as debian:experimental when
cross building to the MIPS32 architecture, i.e. in the other cases what
was needed was being included by sheer luck.
In file included from builtin-sched.c:11:
util/thread.h: In function 'thread__free_stitch_list':
util/thread.h:169:3: error: implicit declaration of function 'free' [-Werror=implicit-function-declaration]
169 | free(pos);
| ^~~~
util/thread.h:169:3: error: incompatible implicit declaration of built-in function 'free' [-Werror]
util/thread.h:19:1: note: include '<stdlib.h>' or provide a declaration of 'free'
18 | #include "callchain.h"
+++ |+#include <stdlib.h>
19 |
util/thread.h:174:3: error: incompatible implicit declaration of built-in function 'free' [-Werror]
174 | free(pos);
| ^~~~
util/thread.h:174:3: note: include '<stdlib.h>' or provide a declaration of 'free'
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-13-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cursor nodes which generates from sample are eventually added into
callchain. To avoid generating cursor nodes from previous samples again,
the previous cursor nodes are also saved for LBR stitching approach.
Some option, e.g. hide-unresolved, may hide some LBRs. Add a variable
'valid' in struct callchain_cursor_node to indicate this case. The LBR
stitching approach will only append the valid cursor nodes from previous
samples later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-12-kan.liang@linux.intel.com
[ Use zfree() instead of open coded equivalent, and use it when freeing members of structs ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To retrieve the overwritten LBRs from previous sample for LBR stitching
approach, perf has to save the previous sample.
Only allocate the struct lbr_stitch once, when LBR stitching approach is
enabled and kernel supports hw_idx.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-11-kan.liang@linux.intel.com
[ Use zalloc()/zfree() for thread->lbr_stitch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The LBR stitch approach should be disabled by default. Because
- The stitching approach base on LBR call stack technology. The known
limitations of LBR call stack technology still apply to the approach,
e.g. Exception handing such as setjmp/longjmp will have calls/returns
not match.
- This approach is not foolproof. There can be cases where it creates
incorrect call stacks from incorrect matches. There is no attempt to
validate any matches in another way.
The 'lbr_stitch_enable' is used to indicate whether enable LBR stitch
approach, which is disabled by default. The following patch will
introduce a new option for each tools to enable the LBR stitch
approach.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-10-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Both caller and callee needs to add ip from LBR to callchain.
Factor out lbr_callchain_add_lbr_ip() to improve code readability.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-9-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Both caller and callee needs to add kernel ip to callchain. Factor out
lbr_callchain_add_kernel_ip() to improve code readability.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-8-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LBR only collect the user call stack. To reconstruct a call stack, both
kernel call stack and user call stack are required. The function
resolve_lbr_callchain_sample() mix the kernel call stack and user call
stack.
Now, with the help of HW idx, perf tool can reconstruct a more complete
call stack by adding some user call stack from previous sample. However,
current implementation is hard to be extended to support it.
Current code path for resolve_lbr_callchain_sample()
for (j = 0; j < mix_chain_nr; j++) {
if (ORDER_CALLEE) {
if (kernel callchain)
Fill callchain info
else if (LBR callchain)
Fill callchain info
} else {
if (LBR callchain)
Fill callchain info
else if (kernel callchain)
Fill callchain info
}
add_callchain_ip();
}
With the patch,
if (ORDER_CALLEE) {
for (j = 0; j < NUM of kernel callchain) {
Fill callchain info
add_callchain_ip();
}
for (; j < mix_chain_nr) {
Fill callchain info
add_callchain_ip();
}
} else {
for (; j < NUM of LBR callchain) {
Fill callchain info
add_callchain_ip();
}
for (j = 0; j < mix_chain_nr) {
Fill callchain info
add_callchain_ip();
}
}
No functional changes.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-7-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The indent is unnecessary in resolve_lbr_callchain_sample. Removing it
will make the following patch simpler.
Current code path for resolve_lbr_callchain_sample()
/* LBR only affects the user callchain */
if (i != chain_nr) {
body of the function
....
return 1;
}
return 0;
With the patch,
/* LBR only affects the user callchain */
if (i == chain_nr)
return 0;
body of the function
...
return 1;
No functional changes.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200319202517.23423-6-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current rXXXX event specification creates event under PERF_TYPE_RAW
pmu type. This change allows to use rXXXX within pmu syntax, so it's
type is used via the following syntax:
-e 'cpu/r3c/'
-e 'cpum_cf/r0/'
The XXXX number goes directly to perf_event_attr::config the same way as
in '-e rXXXX' event. The perf_event_attr::type is filled with pmu type.
Committer testing:
So, lets see what goes in perf_event_attr::config for, say, the
'instructions' PERF_TYPE_HARDWARE (0) event, first we should look at how
to encode this event as a PERF_TYPE_RAW event for this specific CPU, an
AMD Ryzen 5:
# cat /sys/devices/cpu/events/instructions
event=0xc0
#
Then try with it _and_ the instruction, just to see that they are close
enough:
# perf stat -e rc0,instructions sleep 1
Performance counter stats for 'sleep 1':
919,794 rc0
919,898 instructions
1.000754579 seconds time elapsed
0.000715000 seconds user
0.000000000 seconds sys
#
Now we should try, before this patch, the PMU event encoding:
# perf stat -e cpu/rc0/ sleep 1
event syntax error: 'cpu/rc0/'
\___ unknown term
valid terms: event,edge,inv,umask,cmask,config,config1,config2,name,period,percore
#
Now with this patch, the three ways of specifying the 'instructions' CPU
counter are accepted:
# perf stat -e cpu/rc0/,rc0,instructions sleep 1
Performance counter stats for 'sleep 1':
892,948 cpu/rc0/
893,052 rc0
893,156 instructions
1.000931819 seconds time elapsed
0.000916000 seconds user
0.000000000 seconds sys
#
Requested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200416221405.437788-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This will allow parent makefiles to pass values to asciidoc.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: http://lore.kernel.org/lkml/20200416162058.201954-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
According to the API, if memory allocation wasn't possible, or some
other error occurs, asprintf will return -1, and the contents of strp
below are undefined.
int asprintf(char **strp, const char *fmt, ...);
This patch takes care of return value of asprintf to make it less error
prone and prevent the following build warning.
ignoring return value of ‘asprintf’, declared with attribute warn_unused_result [-Wunused-result]
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: hewenliang4@huawei.com
Link: http://lore.kernel.org/lkml/1582163930-233692-1-git-send-email-zhe.he@windriver.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When it is not possible for a non-privilege perf command to monitor at
the kernel level (:k), the fallback code forces a :u. That works if the
event was previously monitoring both levels. But if the event was
already constrained to kernel only, then it does not make sense to
restrict it to user only.
Given the code works by exclusion, a kernel only event would have:
attr->exclude_user = 1
The fallback code would add:
attr->exclude_kernel = 1
In the end the end would not monitor in either the user level or kernel
level. In other words, it would count nothing.
An event programmed to monitor kernel only cannot be switched to user
only without seriously warning the user.
This patch forces an error in this case to make it clear the request
cannot really be satisfied.
Behavior with paranoid 1:
$ sudo bash -c "echo 1 > /proc/sys/kernel/perf_event_paranoid"
$ perf stat -e cycles:k sleep 1
Performance counter stats for 'sleep 1':
1,520,413 cycles:k
1.002361664 seconds time elapsed
0.002480000 seconds user
0.000000000 seconds sys
Old behavior with paranoid 2:
$ sudo bash -c "echo 2 > /proc/sys/kernel/perf_event_paranoid"
$ perf stat -e cycles:k sleep 1
Performance counter stats for 'sleep 1':
0 cycles:ku
1.002358127 seconds time elapsed
0.002384000 seconds user
0.000000000 seconds sys
New behavior with paranoid 2:
$ sudo bash -c "echo 2 > /proc/sys/kernel/perf_event_paranoid"
$ perf stat -e cycles:k sleep 1
Error:
You may not have permission to collect stats.
Consider tweaking /proc/sys/kernel/perf_event_paranoid,
which controls use of the performance events system by
unprivileged users (without CAP_PERFMON or CAP_SYS_ADMIN).
The current value is 2:
-1: Allow use of (almost) all events by all users
Ignore mlock limit after perf_event_mlock_kb without CAP_IPC_LOCK
>= 0: Disallow ftrace function tracepoint by users without CAP_PERFMON or CAP_SYS_ADMIN
Disallow raw tracepoint access by users without CAP_SYS_PERFMON or CAP_SYS_ADMIN
>= 1: Disallow CPU event access by users without CAP_PERFMON or CAP_SYS_ADMIN
>= 2: Disallow kernel profiling by users without CAP_PERFMON or CAP_SYS_ADMIN
To make this setting permanent, edit /etc/sysctl.conf too, e.g.:
kernel.perf_event_paranoid = -1
v2 of this patch addresses the review feedback from jolsa@redhat.com.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200414161550.225588-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When AUX area events are used in sampling mode, they must be the group
leader, but the group leader is also used for leader-sampling. However,
it is not desirable to use an AUX area event as the leader for
leader-sampling, because it doesn't have any samples of its own. To support
leader-sampling with AUX area events, use the 2nd event of the group as the
"leader" for the purposes of leader-sampling.
Example:
# perf record --kcore --aux-sample -e '{intel_pt//,cycles,instructions}:S' -c 10000 uname
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.786 MB perf.data ]
# perf report
Samples: 380 of events 'anon group { cycles, instructions }', Event count (approx.): 3026164
Children Self Command Shared Object Symbol
+ 38.76% 42.65% 0.00% 0.00% uname [kernel.kallsyms] [k] __x86_indirect_thunk_rax
+ 35.82% 31.33% 0.00% 0.00% uname ld-2.28.so [.] _dl_start_user
+ 34.29% 29.74% 0.55% 0.47% uname ld-2.28.so [.] _dl_start
+ 33.73% 28.62% 1.60% 0.97% uname ld-2.28.so [.] dl_main
+ 33.19% 29.04% 0.52% 0.32% uname ld-2.28.so [.] _dl_sysdep_start
+ 27.83% 33.74% 0.00% 0.00% uname [kernel.kallsyms] [k] do_syscall_64
+ 26.76% 33.29% 0.00% 0.00% uname [kernel.kallsyms] [k] entry_SYSCALL_64_after_hwframe
+ 23.78% 20.33% 5.97% 5.25% uname [kernel.kallsyms] [k] page_fault
+ 23.18% 24.60% 0.00% 0.00% uname libc-2.28.so [.] __libc_start_main
+ 22.64% 24.37% 0.00% 0.00% uname uname [.] _start
+ 21.04% 23.27% 0.00% 0.00% uname uname [.] main
+ 19.48% 18.08% 3.72% 3.64% uname ld-2.28.so [.] _dl_relocate_object
+ 19.47% 21.81% 0.00% 0.00% uname libc-2.28.so [.] setlocale
+ 19.44% 21.56% 0.52% 0.61% uname libc-2.28.so [.] _nl_find_locale
+ 17.87% 19.66% 0.00% 0.00% uname libc-2.28.so [.] _nl_load_locale_from_archive
+ 15.71% 13.73% 0.53% 0.52% uname [kernel.kallsyms] [k] do_page_fault
+ 15.18% 13.21% 1.03% 0.68% uname [kernel.kallsyms] [k] handle_mm_fault
+ 14.15% 12.53% 1.01% 1.12% uname [kernel.kallsyms] [k] __handle_mm_fault
+ 12.03% 9.67% 0.54% 0.32% uname ld-2.28.so [.] _dl_map_object
+ 10.55% 8.48% 0.00% 0.00% uname ld-2.28.so [.] openaux
+ 10.55% 20.20% 0.52% 0.61% uname libc-2.28.so [.] __run_exit_handlers
Comnmitter notes:
Fixed up this problem:
util/record.c: In function ‘perf_evlist__config’:
util/record.c:256:3: error: too few arguments to function ‘perf_evsel__config_leader_sampling’
256 | perf_evsel__config_leader_sampling(evsel);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/record.c:190:13: note: declared here
190 | static void perf_evsel__config_leader_sampling(struct evsel *evsel,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200401101613.6201-17-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tools find the correct evsel, and therefore read format, using the event
ID, so it isn't necessary for all read formats to be the same. In the
case of leader-sampling of AUX area events, dummy tracking events will
have a different read format, so relax the validation to become a debug
message only.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200401101613.6201-16-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for adding support for leader sampling with AUX area events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200401101613.6201-15-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move leader-sampling configuration in preparation for adding support for
leader sampling with AUX area events.
Committer notes:
It only makes sense when configuring an evsel that is part of an evlist,
so the only case where it is called outside perf_evlist__config(), in
some 'perf test' entry, is safe, and even there we should just use
perf_evlist__config(), but since in that case we have just one evsel in
the evlist, it is equivalent.
Also fixed up this problem:
util/record.c: In function ‘perf_evlist__config’:
util/record.c:223:3: error: too many arguments to function ‘perf_evsel__config_leader_sampling’
223 | perf_evsel__config_leader_sampling(evsel, evlist);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/record.c:170:13: note: declared here
170 | static void perf_evsel__config_leader_sampling(struct evsel *evsel)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200401101613.6201-14-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move and globalize 2 functions from the auxtrace specific sources so
that they can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200401101613.6201-13-adrian.hunter@intel.com
[ Move to pmu.c, as moving to evsel.h breaks the python binding ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow building vringh without IOTLB (that's the case for userspace
builds, will be useful for CAIF/VOD down the road too).
Update for API tweaks.
Don't include vringh with userspace builds.
Cc: Jason Wang <jasowang@redhat.com>
Cc: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Pull networking fixes from David Miller:
1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel.
2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet.
3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing.
4) Adjust icmp6 message source address selection when routes have a
preferred source address set, from Tim Stallard.
5) Be sure to validate HSR protocol version when creating new links,
from Taehee Yoo.
6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in
non-initial namespaces, from Michael Weiß.
7) Missing release firmware call in mlx5, from Eran Ben Elisha.
8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from
Taehee Yoo.
9) Fix pause frame negotiation in marvell phy driver, from Clemens
Gruber.
10) Record RX queue early enough in tun packet paths such that XDP
programs will see the correct RX queue index, from Gilberto Bertin.
11) Fix double unlock in mptcp, from Florian Westphal.
12) Fix offset overflow in ARM bpf JIT, from Luke Nelson.
13) marvell10g needs to soft reset PHY when coming out of low power
mode, from Russell King.
14) Fix MTU setting regression in stmmac for some chip types, from
Florian Fainelli.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
amd-xgbe: Use __napi_schedule() in BH context
mISDN: make dmril and dmrim static
net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode
tipc: fix incorrect increasing of link window
Documentation: Fix tcp_challenge_ack_limit default value
net: tulip: make early_486_chipsets static
dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400
ipv6: remove redundant assignment to variable err
net/rds: Use ERR_PTR for rds_message_alloc_sgs()
net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge
selftests/bpf: Check for correct program attach/detach in xdp_attach test
libbpf: Fix type of old_fd in bpf_xdp_set_link_opts
libbpf: Always specify expected_attach_type on program load if supported
xsk: Add missing check on user supplied headroom size
mac80211: fix channel switch trigger from unknown mesh peer
mac80211: fix race in ieee80211_register_hw()
net: marvell10g: soft-reset the PHY when coming out of low power
net: marvell10g: report firmware version
net/cxgb4: Check the return from t4_query_params properly
...
For reporting purposes, an evsel sample can have a callchain synthesized
from AUX area data. Add support for keeping track of synthesized sample
types. Note, the recorded sample_type cannot be changed because it is
needed to continue to parse events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200401101613.6201-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using 'type' variable for checking for callchains is equivalent to using
evsel__has_callchain(evsel) and is how the other PERF_SAMPLE_ bits are checked
in this function, so use it to be consistent.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200401101613.6201-11-adrian.hunter@intel.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a thread stack function to create a call chain for hardware events
where the sample records get created some time after the event occurred.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200401101613.6201-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, callchains can be synthesized only for synthesized events. Add
an itrace option to synthesize callchains for regular events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200401101613.6201-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add ->evsel_is_auxtrace() callback to identify if a selected event
is an AUX area event.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200401101613.6201-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This script works in tandem with d3-flame-graph to generate flame graphs
from perf. It supports two output formats: JSON and HTML (the default).
The HTML format will look for a standalone d3-flame-graph template file
in /usr/share/d3-flame-graph/d3-flamegraph-base.html and fill in the
collected stacks.
Usage:
perf record -a -g -F 99 sleep 60
perf script report flamegraph
Combined:
perf script flamegraph -a -F 99 sleep 60
Committer testing:
Tested both with "PYTHON=python3" and with the default, that uses
python2-devel:
Complete set of instructions:
$ mkdir /tmp/build/perf
$ make PYTHON=python3 -C tools/perf O=/tmp/build/perf install-bin
$ export PATH=~/bin:$PATH
$ perf record -a -g -F 99 sleep 60
$ perf script report flamegraph
Now go and open the generated flamegraph.html file in a browser.
At first this required building with PYTHON=python3, but after I
reported this Andreas was kind enough to send a patch making it work
with both python and python3.
Signed-off-by: Andreas Gerstmayr <agerstmayr@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brendan Gregg <bgregg@netflix.com>
Cc: Martin Spier <mspier@netflix.com>
Link: http://lore.kernel.org/lkml/20200320151355.66302-1-agerstmayr@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch refactors metricgroup__add_metric function where some part of
it move to function metricgroup__add_metric_param. No logic change.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20200401203340.31402-4-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the expr_scanner_ctx object to hold user data for the expr scanner.
Currently it holds only start_token, Kajol Jain will use it to hold 24x7
runtime param.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20200401203340.31402-3-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding expr_ prefix for parse_ctx and parse_id, to straighten out the
expr* namespace.
There's no functional change.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20200401203340.31402-2-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reuse an existing char buffer to avoid two PATH_MAX sized char buffers.
Reduces stack frame sizes by 4kb.
perf_event__synthesize_mmap_events before 'sub $0x45b8,%rsp' after
'sub $0x35b8,%rsp'.
perf_event__get_comm_ids before 'sub $0x2028,%rsp' after
'sub $0x1028,%rsp'.
The performance impact of this change is negligible.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrey Zhizhikin <andrey.z@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200402154357.107873-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The xxx_mountpoint() interface provided by fs.c finds mount points for
common pseudo filesystems. The first time xxx_mountpoint() is invoked,
it scans the mount table (/proc/mounts) looking for a match. If found,
it is cached. The price to scan /proc/mounts is paid once if the mount
is found.
When the mount point is not found, subsequent calls to xxx_mountpoint()
scan /proc/mounts over and over again. There is no caching.
This causes a scaling issue in perf record with hugeltbfs__mountpoint().
The function is called for each process found in
synthesize__mmap_events(). If the machine has thousands of processes
and if the /proc/mounts has many entries this could cause major overhead
in perf record. We have observed multi-second slowdowns on some
configurations.
As an example on a laptop:
Before:
$ sudo umount /dev/hugepages
$ strace -e trace=openat -o /tmp/tt perf record -a ls
$ fgrep mounts /tmp/tt
285
After:
$ sudo umount /dev/hugepages
$ strace -e trace=openat -o /tmp/tt perf record -a ls
$ fgrep mounts /tmp/tt
1
One could argue that the non-caching in case the moint point is not
found is intentional. That way subsequent calls may discover a moint
point if the sysadmin mounts the filesystem. But the same argument could
be made against caching the mount point. It could be unmounted causing
errors. It all depends on the intent of the interface. This patch
assumes it is expected to scan /proc/mounts once. The patch documents
the caching behavior in the fs.h header file.
An alternative would be to just fix perf record. But it would solve the
problem with hugetlbs__mountpoint() but there could be similar issues
(possibly down the line) with other xxx_mountpoint() calls in perf or
other tools.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrey Zhizhikin <andrey.z@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200402154357.107873-3-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Event synthesis may occur at the start or end (tail) of a perf command.
In system-wide mode it can scan every process in /proc, which may add
seconds of latency before event recording. Add a new benchmark that
times how long event synthesis takes with and without data synthesis.
An example execution looks like:
$ perf bench internals synthesize
# Running 'internals/synthesize' benchmark:
Average synthesis took: 168.253800 usec
Average data synthesis took: 208.104700 usec
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrey Zhizhikin <andrey.z@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200402154357.107873-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend error messages to mention CAP_PERFMON capability as an option to
substitute CAP_SYS_ADMIN capability for secure system performance
monitoring and observability operations. Make
perf_event_paranoid_check() and __cmd_ftrace() to be aware of
CAP_PERFMON capability.
CAP_PERFMON implements the principle of least privilege for performance
monitoring and observability operations (POSIX IEEE 1003.1e 2.2.2.39
principle of least privilege: A security design principle that states
that a process or program be granted only those privileges (e.g.,
capabilities) necessary to accomplish its legitimate function, and only
for the time that such privileges are actually required)
For backward compatibility reasons access to perf_events subsystem remains
open for CAP_SYS_ADMIN privileged processes but CAP_SYS_ADMIN usage for
secure perf_events monitoring is discouraged with respect to CAP_PERFMON
capability.
Committer testing:
Using a libcap with this patch:
diff --git a/libcap/include/uapi/linux/capability.h b/libcap/include/uapi/linux/capability.h
index 78b2fd4c8a95..89b5b0279b60 100644
--- a/libcap/include/uapi/linux/capability.h
+++ b/libcap/include/uapi/linux/capability.h
@@ -366,8 +366,9 @@ struct vfs_ns_cap_data {
#define CAP_AUDIT_READ 37
+#define CAP_PERFMON 38
-#define CAP_LAST_CAP CAP_AUDIT_READ
+#define CAP_LAST_CAP CAP_PERFMON
#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
Note that using '38' in place of 'cap_perfmon' works to some degree with
an old libcap, its only when cap_get_flag() is called that libcap
performs an error check based on the maximum value known for
capabilities that it will fail.
This makes determining the default of perf_event_attr.exclude_kernel to
fail, as it can't determine if CAP_PERFMON is in place.
Using 'perf top -e cycles' avoids the default check and sets
perf_event_attr.exclude_kernel to 1.
As root, with a libcap supporting CAP_PERFMON:
# groupadd perf_users
# adduser perf -g perf_users
# mkdir ~perf/bin
# cp ~acme/bin/perf ~perf/bin/
# chgrp perf_users ~perf/bin/perf
# setcap "cap_perfmon,cap_sys_ptrace,cap_syslog=ep" ~perf/bin/perf
# getcap ~perf/bin/perf
/home/perf/bin/perf = cap_sys_ptrace,cap_syslog,cap_perfmon+ep
# ls -la ~perf/bin/perf
-rwxr-xr-x. 1 root perf_users 16968552 Apr 9 13:10 /home/perf/bin/perf
As the 'perf' user in the 'perf_users' group:
$ perf top -a --stdio
Error:
Failed to mmap with 1 (Operation not permitted)
$
Either add the cap_ipc_lock capability to the perf binary or reduce the
ring buffer size to some smaller value:
$ perf top -m10 -a --stdio
rounding mmap pages size to 64K (16 pages)
Error:
Failed to mmap with 1 (Operation not permitted)
$ perf top -m4 -a --stdio
Error:
Failed to mmap with 1 (Operation not permitted)
$ perf top -m2 -a --stdio
PerfTop: 762 irqs/sec kernel:49.7% exact: 100.0% lost: 0/0 drop: 0/0 [4000Hz cycles], (all, 4 CPUs)
------------------------------------------------------------------------------------------------------
9.83% perf [.] __symbols__insert
8.58% perf [.] rb_next
5.91% [kernel] [k] module_get_kallsym
5.66% [kernel] [k] kallsyms_expand_symbol.constprop.0
3.98% libc-2.29.so [.] __GI_____strtoull_l_internal
3.66% perf [.] rb_insert_color
2.34% [kernel] [k] vsnprintf
2.30% [kernel] [k] string_nocheck
2.16% libc-2.29.so [.] _IO_getdelim
2.15% [kernel] [k] number
2.13% [kernel] [k] format_decode
1.58% libc-2.29.so [.] _IO_feof
1.52% libc-2.29.so [.] __strcmp_avx2
1.50% perf [.] rb_set_parent_color
1.47% libc-2.29.so [.] __libc_calloc
1.24% [kernel] [k] do_syscall_64
1.17% [kernel] [k] __x86_indirect_thunk_rax
$ perf record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.552 MB perf.data (74 samples) ]
$ perf evlist
cycles
$ perf evlist -v
cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
$ perf report | head -20
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 74 of event 'cycles'
# Event count (approx.): 15694834
#
# Overhead Command Shared Object Symbol
# ........ ............... .......................... ......................................
#
19.62% perf [kernel.vmlinux] [k] strnlen_user
13.88% swapper [kernel.vmlinux] [k] intel_idle
13.83% ksoftirqd/0 [kernel.vmlinux] [k] pfifo_fast_dequeue
13.51% swapper [kernel.vmlinux] [k] kmem_cache_free
6.31% gnome-shell [kernel.vmlinux] [k] kmem_cache_free
5.66% kworker/u8:3+ix [kernel.vmlinux] [k] delay_tsc
4.42% perf [kernel.vmlinux] [k] __set_cpus_allowed_ptr
3.45% kworker/2:1-eve [kernel.vmlinux] [k] shmem_truncate_range
2.29% gnome-shell libgobject-2.0.so.0.6000.7 [.] g_closure_ref
$
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-doc@vger.kernel.org
Cc: linux-man@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: selinux@vger.kernel.org
Link: http://lore.kernel.org/lkml/a66d5648-2b8e-577e-e1f2-1d56c017ab5e@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the DSO_BINARY_TYPE__BPF_IMAGE dso binary type to recognize BPF
images that carry trampoline or dispatcher.
Upcoming patches will add support to read the image data, store it
within the BPF feature in perf.data and display it for annotation
purposes.
Currently we only display following message:
# ./perf annotate bpf_trampoline_24456 --stdio
Percent | Source code & Disassembly of . for cycles (504 ...
--------------------------------------------------------------- ...
: to be implemented
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200312195610.346362-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no special load action for ksymbol data on map__load/dso__load
action, where the kernel is getting loaded. It only gets confused with
kernel kallsyms/vmlinux load for bpf object, which fails and could mess
up with the map.
Disabling any further load of the map for ksymbol related dso/map.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200312195610.346362-15-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Synthesize bpf images (trampolines/dispatchers) on start, as ksymbol
events from /proc/kallsyms. Having this perf can recognize samples from
those images and perf report and top shows them correctly.
The rest of the ksymbol handling is already in place from for the bpf
programs monitoring, so only the initial state was needed.
perf report output:
# Overhead Command Shared Object Symbol
12.37% test_progs [kernel.vmlinux] [k] entry_SYSCALL_64
11.80% test_progs [kernel.vmlinux] [k] syscall_return_via_sysret
9.63% test_progs bpf_prog_bcf7977d3b93787c_prog2 [k] bpf_prog_bcf7977d3b93787c_prog2
6.90% test_progs bpf_trampoline_24456 [k] bpf_trampoline_24456
6.36% test_progs [kernel.vmlinux] [k] memcpy_erms
Committer notes:
Use scnprintf() instead of strncpy() to overcome this on fedora:32,
rawhide and OpenMandriva Cooker:
CC /tmp/build/perf/util/bpf-event.o
In file included from /usr/include/string.h:495,
from /git/linux/tools/lib/bpf/libbpf_common.h:12,
from /git/linux/tools/lib/bpf/bpf.h:31,
from util/bpf-event.c:4:
In function 'strncpy',
inlined from 'process_bpf_image' at util/bpf-event.c:323:2,
inlined from 'kallsyms_process_symbol' at util/bpf-event.c:358:9:
/usr/include/bits/string_fortified.h:106:10: error: '__builtin_strncpy' specified bound 256 equals destination size [-Werror=stringop-truncation]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David S. Miller <davem@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200312195610.346362-14-jolsa@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When --timeout is used and a workload is specified to be started by
'perf stat', i.e.
$ perf stat --timeout 1000 sleep 1h
The --timeout wasn't being honoured, i.e. the workload, 'sleep 1h' in
the above example, should be terminated after 1000ms, but it wasn't,
'perf stat' was waiting for it to finish.
Fix it by sending a SIGTERM when the timeout expires.
Now it works:
# perf stat -e cycles --timeout 1234 sleep 1h
sleep: Terminated
Performance counter stats for 'sleep 1h':
1,066,692 cycles
1.234314838 seconds time elapsed
0.000750000 seconds user
0.000000000 seconds sys
#
Fixes: f1f8ad52f8 ("perf stat: Add support to print counts after a period of time")
Reported-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207243
Tested-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: yuzhoujian <yuzhoujian@didichuxing.com>
Link: https://lore.kernel.org/lkml/20200415153803.GB20324@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces test_add_max_memory_regions(), which checks
that a VM can have added memory slots up to the limit defined in
KVM_CAP_NR_MEMSLOTS. Then attempt to add one more slot to
verify it fails as expected.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200410231707.7128-11-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make set_memory_region_test available on all architectures by wrapping
the bits that are x86-specific in ifdefs. A future testcase
to create the maximum number of memslots will be architecture
agnostic.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200410231707.7128-10-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a testcase for running a guest with no memslots to the memory region
test. The expected result on x86_64 is that the guest will trigger an
internal KVM error due to the initial code fetch encountering a
non-existent memslot and resulting in an emulation failure.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200410231707.7128-9-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduces the vm_get_fd() function in kvm_util which returns
the VM file descriptor.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200410231707.7128-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a testcase for deleting memslots while the guest is running.
Like the "move" testcase, this is x86_64-only as it relies on MMIO
happening when a non-existent memslot is encountered.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200410231707.7128-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use sem_post() and sem_timedwait() to synchronize test stages between
the vCPU thread and the main thread instead of using usleep() to wait
for the vCPU thread and hoping for the best.
Opportunistically refactor the code to make it suck less in general,
and to prepare for adding more testcases.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200410231707.7128-6-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add variants of GUEST_ASSERT to pass values back to the host, e.g. to
help debug/understand a failure when the the cause of the assert isn't
necessarily binary.
It'd probably be possible to auto-calculate the number of arguments and
just have a single GUEST_ASSERT, but there are a limited number of
variants and silently eating arguments could lead to subtle code bugs.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200410231707.7128-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a utility to delete a memory region, it will be used by x86's
set_memory_region_test.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20200410231707.7128-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the KVM selftests' homebrewed linked lists for vCPUs and memory
regions with the kernel's 'struct list_head'.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20200410231707.7128-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The sole caller of vm_vcpu_rm() already has the vcpu pointer, take it
directly instead of doing an extra lookup.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20200410231707.7128-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Ahern noticed that there was a bug in the EXPECTED_FD code so
programs did not get detached properly when that parameter was supplied.
This case was not included in the xdp_attach tests; so let's add it to be
sure that such a bug does not sneak back in down.
Fixes: 87854a0b57 ("selftests/bpf: Add tests for attaching XDP programs")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200414145025.182163-2-toke@redhat.com
The 'old_fd' parameter used for atomic replacement of XDP programs is
supposed to be an FD, but was left as a u32 from an earlier iteration of
the patch that added it. It was converted to an int when read, so things
worked correctly even with negative values, but better change the
definition to correctly reflect the intention.
Fixes: bd5ca3ef93 ("libbpf: Add function to set link XDP fd while specifying old program")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200414145025.182163-1-toke@redhat.com
For some types of BPF programs that utilize expected_attach_type, libbpf won't
set load_attr.expected_attach_type, even if expected_attach_type is known from
section definition. This was done to preserve backwards compatibility with old
kernels that didn't recognize expected_attach_type attribute yet (which was
added in 5e43f899b0 ("bpf: Check attach type at prog load time"). But this
is problematic for some BPF programs that utilize newer features that require
kernel to know specific expected_attach_type (e.g., extended set of return
codes for cgroup_skb/egress programs).
This patch makes libbpf specify expected_attach_type by default, but also
detect support for this field in kernel and not set it during program load.
This allows to have a good metadata for bpf_program
(e.g., bpf_program__get_extected_attach_type()), but still work with old
kernels (for cases where it can work at all).
Additionally, due to expected_attach_type being always set for recognized
program types, bpf_program__attach_cgroup doesn't have to do extra checks to
determine correct attach type, so remove that additional logic.
Also adjust section_names selftest to account for this change.
More detailed discussion can be found in [0].
[0] https://lore.kernel.org/bpf/20200412003604.GA15986@rdna-mbp.dhcp.thefacebook.com/
Fixes: 5cf1e91456 ("bpf: cgroup inet skb programs can return 0 to 3")
Fixes: 5e43f899b0 ("bpf: Check attach type at prog load time")
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20200414182645.1368174-1-andriin@fb.com
In commit 65c9362859 ("bpftool: Add struct_ops support") a new
type of command named struct_ops has been added. This command requires
a kernel with CONFIG_DEBUG_INFO_BTF=y set and for retrieving BTF info
in bpftool, the helper get_btf_vmlinux() is used.
When running this command on kernel without BTF debug info, this will
lead to 'btf_vmlinux' variable being an invalid(error) pointer. And by
this, btf_free() causes a segfault when executing 'bpftool struct_ops'.
This commit adds pointer validation with IS_ERR not to free invalid
pointer, and this will fix the segfault issue.
Fixes: 65c9362859 ("bpftool: Add struct_ops support")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200410020612.2930667-1-danieltimlee@gmail.com
Test that frozen and mmap()'ed BPF map can't be mprotect()'ed as writable or
executable memory. Also validate that "downgrading" from writable to read-only
doesn't screw up internal writable count accounting for the purposes of map
freezing.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200410202613.3679837-2-andriin@fb.com
In the current code, it only removes *.o and .*.o.d file when make clean,
there still exists useless .*.o.cmd file, just remove it.
Without this patch:
[yangtiezhu@linux spi]$ make
[yangtiezhu@linux spi]$ make clean
[yangtiezhu@linux spi]$ ls -1 .*.o.cmd
.spidev_fdx-in.o.cmd
.spidev_fdx.o.cmd
.spidev_test-in.o.cmd
.spidev_test.o.cmd
With this patch:
[yangtiezhu@linux spi]$ make
[yangtiezhu@linux spi]$ make clean
[yangtiezhu@linux spi]$ ls -1 .*.o.cmd
ls: cannot access .*.o.cmd: No such file or directory
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1586230512-5507-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
After successfully running the IPC msgque test once, subsequent runs
result in a test failure:
$ sudo ./run_kselftest.sh
TAP version 13
1..1
# selftests: ipc: msgque
# Failed to get stats for IPC queue with id 0
# Failed to dump queue: -22
# Bail out!
# # Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
not ok 1 selftests: ipc: msgque # exit=1
The dump_queue() function loops through the possible message queue index
values using calls to msgctl(kern_id, MSG_STAT, ...) where kern_id
represents the index value. The first time the test is ran, the initial
index value of 0 is valid and the test is able to complete. The index
value of 0 is not valid in subsequent test runs and the loop attempts to
try index values of 1, 2, 3, and so on until a valid index value is
found that corresponds to the message queue created earlier in the test.
The msgctl() syscall returns -1 and sets errno to EINVAL when invalid
index values are used. The test failure is caused by incorrectly
comparing errno to -EINVAL when cycling through possible index values.
Fix invalid test failures on subsequent runs of the msgque test by
correctly comparing errno values to a non-negated EINVAL.
Fixes: 3a665531a3 ("selftests: IPC message queue copy feature test")
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This reverts commit b32694cd07.
The original comment was neither reviewed nor tested. Thus, this the
*only* possible action to take.
Cc: Nikita Sobolev <Nikita.Sobolev@synopsys.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
ftrace-direct.tc and kprobe-direct.tc require CONFIG_SAMPLE_FTRACE_DIRECT=m
so add it to config file which is used by merge_config.sh.
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
glibc 2.31 calls clock_nanosleep when its nanosleep function is used. So
the restart_syscall fails after that. In order to deal with it, we trace
clock_nanosleep and nanosleep. Then we check for either.
This works just fine on systems with both glibc 2.30 and glibc 2.31,
whereas it failed before on a system with glibc 2.31.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
While running seccomp_bpf, kill_after_ptrace() gets stuck if we run it
via /usr/bin/timeout (that is the default), until the timeout expires.
This is because /usr/bin/timeout is preventing to properly deliver
signals to ptrace'd children (SIGSYS in this case).
This problem can be easily reproduced by running:
$ sudo make TARGETS=seccomp kselftest
...
# [ RUN ] TRACE_syscall.skip_a#
not ok 1 selftests: seccomp: seccomp_bpf # TIMEOUT
The test is hanging at this point until the timeout expires and then it
reports the timeout error.
Prevent this problem by passing --foreground to /usr/bin/timeout,
allowing to properly deliver signals to children processes.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There a few identical spelling mistakes, fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
To pick up the changes in these csets:
295bcca849 ("linux/bits.h: add compile time sanity check of GENMASK inputs")
3945ff37d2 ("linux/bits.h: Extract common header for vDSO")
To address this tools/perf build warning:
Warning: Kernel ABI header at 'tools/include/linux/bits.h' differs from latest version at 'include/linux/bits.h'
diff -u tools/include/linux/bits.h include/linux/bits.h
This clashes with usage of userspace's static_assert(), that, at least
on glibc, is guarded by a ifnded/endif pair, do the same to our copy of
build_bug.h and avoid that diff in check_headers.sh so that we continue
checking for drifts with the kernel sources master copy.
This will all be tested with the set of build containers that includes
uCLibc, musl libc, lots of glibc versions in lots of distros and cross
build environments.
The tools/objtool, tools/bpf, etc were tested as well.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be needed when syncing the linux/bits.h header, in the next cset.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
d3b1b776ee ("x86/entry/64: Remove ptregs qualifier from syscall table")
cab56d3484 ("x86/entry: Remove ABI prefixes from functions in syscall tables")
27dd84fafc ("x86/entry/64: Use syscall wrappers for x32_rt_sigreturn")
Addressing this tools/perf build warning:
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
That didn't result in any tooling changes, as what is extracted are just
the first two columns, and these patches touched only the third.
$ cp /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c /tmp
$ cp arch/x86/entry/syscalls/syscall_64.tbl tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
DESCEND plugins
CC /tmp/build/perf/util/syscalltbl.o
INSTALL trace_plugins
LD /tmp/build/perf/util/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
$ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c /tmp/syscalls_64.c
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the change in:
88be76cdaf ("drm/i915: Allow userspace to specify ringsize on construction")
That don't result in any changes in tooling, just silences this perf
build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
455e00f141 ("drm: Add getfb2 ioctl")
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Now 'perf trace' and other code that might use the
tools/perf/trace/beauty autogenerated tables will be able to translate
this new ioctl code into a string:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
--- before 2020-04-14 09:28:45.461821077 -0300
+++ after 2020-04-14 09:28:53.594782685 -0300
@@ -107,6 +107,7 @@
[0xCB] = "SYNCOBJ_QUERY",
[0xCC] = "SYNCOBJ_TRANSFER",
[0xCD] = "SYNCOBJ_TIMELINE_SIGNAL",
+ [0xCE] = "MODE_GETFB2",
[DRM_COMMAND_BASE + 0x00] = "I915_INIT",
[DRM_COMMAND_BASE + 0x01] = "I915_FLUSH",
[DRM_COMMAND_BASE + 0x02] = "I915_FLIP",
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from:
9a5788c615 ("KVM: PPC: Book3S HV: Add a capability for enabling secure guests")
3c9bd4006b ("KVM: x86: enable dirty log gradually in small chunks")
13da9ae1cd ("KVM: s390: protvirt: introduce and enable KVM_CAP_S390_PROTECTED")
e0d2773d48 ("KVM: s390: protvirt: UV calls in support of diag308 0, 1")
19e1227768 ("KVM: S390: protvirt: Introduce instruction data area bounce buffer")
29b40f105e ("KVM: s390: protvirt: Add initial vm and cpu lifecycle handling")
So far we're ignoring those arch specific ioctls, we need to revisit
this at some time to have arch specific tables, etc:
$ grep S390 tools/perf/trace/beauty/kvm_ioctl.sh
egrep -v " ((ARM|PPC|S390)_|[GS]ET_(DEBUGREGS|PIT2|XSAVE|TSC_KHZ)|CREATE_SPAPR_TCE_64)" | \
$
This addresses these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h'
diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jay Zhou <jianjay.zhou@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
4c8cf31885 ("vhost: introduce vDPA-based backend")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
This automatically picks these new ioctls, making tools such as 'perf
trace' aware of them and possibly allowing to use the strings in
filters, etc:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2020-04-14 09:12:28.559748968 -0300
+++ after 2020-04-14 09:12:38.781696242 -0300
@@ -24,9 +24,16 @@
[0x44] = "SCSI_GET_EVENTS_MISSED",
[0x60] = "VSOCK_SET_GUEST_CID",
[0x61] = "VSOCK_SET_RUNNING",
+ [0x72] = "VDPA_SET_STATUS",
+ [0x74] = "VDPA_SET_CONFIG",
+ [0x75] = "VDPA_SET_VRING_ENABLE",
};
static const char *vhost_virtio_ioctl_read_cmds[] = {
[0x00] = "GET_FEATURES",
[0x12] = "GET_VRING_BASE",
[0x26] = "GET_BACKEND_FEATURES",
+ [0x70] = "VDPA_GET_DEVICE_ID",
+ [0x71] = "VDPA_GET_STATUS",
+ [0x73] = "VDPA_GET_CONFIG",
+ [0x76] = "VDPA_GET_VRING_NUM",
};
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the doublefault exception handler unconditional on 32-bit. Yes,
it is important to be able to catch #DF exceptions instead of silent
reboots. Yes, the code size increase is worth every byte. And one less
CONFIG symbol is just the cherry on top.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200404083646.8897-1-bp@alien8.de
To pick up the changes from:
077168e241 ("x86/mce/amd: Add PPIN support for AMD MCE")
753039ef8b ("x86/cpu/amd: Call init_amd_zn() om Family 19h processors too")
6650cdd9a8 ("x86/split_lock: Enable split lock detection by kernel")
These don't cause any changes in tooling, just silences this perf build
warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
e346b38130 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()")
Add that to 'perf trace's mremap 'flags' decoder.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h'
diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
ef2c41cf38 ("clone3: allow spawning processes into cgroups")
Add that to 'perf trace's clone 'flags' decoder.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h'
diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get in line with:
8165b57bca ("linux/const.h: Extract common header for vDSO")
And silence this tools/perf/ build warning:
Warning: Kernel ABI header at 'tools/include/linux/const.h' differs from latest version at 'include/linux/const.h'
diff -u tools/include/linux/const.h include/linux/const.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We received a report that was no metric header displayed if --per-socket
and --metric-only were both set.
It's hard for script to parse the perf-stat output. This patch fixes this
issue.
Before:
root@kbl-ppc:~# perf stat -a -M CPI --metric-only --per-socket
^C
Performance counter stats for 'system wide':
S0 8 2.6
2.215270071 seconds time elapsed
root@kbl-ppc:~# perf stat -a -M CPI --metric-only --per-socket -I1000
# time socket cpus
1.000411692 S0 8 2.2
2.001547952 S0 8 3.4
3.002446511 S0 8 3.4
4.003346157 S0 8 4.0
5.004245736 S0 8 0.3
After:
root@kbl-ppc:~# perf stat -a -M CPI --metric-only --per-socket
^C
Performance counter stats for 'system wide':
CPI
S0 8 2.1
1.813579830 seconds time elapsed
root@kbl-ppc:~# perf stat -a -M CPI --metric-only --per-socket -I1000
# time socket cpus CPI
1.000415122 S0 8 3.2
2.001630051 S0 8 2.9
3.002612278 S0 8 4.3
4.003523594 S0 8 3.0
5.004504256 S0 8 3.7
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200331180226.25915-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The set of C compiler options used by distros to build python bindings
may include options that are unknown to clang, we check for a variety of
such options, add -fno-semantic-interposition to that mix:
This fixes the build on, among others, Manjaro Linux:
GEN /tmp/build/perf/python/perf.so
clang-9: error: unknown argument: '-fno-semantic-interposition'
error: command 'clang' failed with exit status 1
make: Leaving directory '/git/perf/tools/perf'
[perfbuilder@602aed1c266d ~]$ gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/9.3.0/lto-wrapper
Target: x86_64-pc-linux-gnu
Configured with: /build/gcc/src/gcc/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-pkgversion='Arch Linux 9.3.0-1' --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++,d --enable-shared --enable-threads=posix --with-system-zlib --with-isl --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --disable-libssp --enable-gnu-unique-object --enable-linker-build-id --enable-lto --enable-plugin --enable-install-libiberty --with-linker-hash-style=gnu --enable-gnu-indirect-function --enable-multilib --disable-werror --enable-checking=release --enable-default-pie --enable-default-ssp --enable-cet=auto gdc_include_dir=/usr/include/dlang/gdc
Thread model: posix
gcc version 9.3.0 (Arch Linux 9.3.0-1)
[perfbuilder@602aed1c266d ~]$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If func is NULL, a seg fault can result.
This is a theoretical issue which was found by Coverity, ID: 1492002
("Dereference after null check").
Fixes: c705cecc84 ("objtool: Track original function across branches")
Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/afc628693a37acd287e843bcc5c0430263d93c74.1585761021.git.jpoimboe@redhat.com
If a switch jump table's indirect branch is in a ".cold" subfunction in
.text.unlikely, objtool doesn't detect it, and instead prints a false
warning:
drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame
drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame
drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame
Fix it by comparing the function, instead of the section and offset.
Fixes: 13810435b9 ("objtool: Support GCC 8's cold subfunctions")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.com
When compiling the kernel with AS=clang, objtool produces a lot of
warnings:
warning: objtool: missing symbol for section .text
warning: objtool: missing symbol for section .init.text
warning: objtool: missing symbol for section .ref.text
It then fails to generate the ORC table.
The problem is that objtool assumes text section symbols always exist.
But the Clang assembler is aggressive about removing them.
When generating relocations for the ORC table, objtool always tries to
reference instructions by their section symbol offset. If the section
symbol doesn't exist, it bails.
Do a fallback: when a section symbol isn't available, reference a
function symbol instead.
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/669
Link: https://lkml.kernel.org/r/9a9cae7fcf628843aabe5a086b1a3c5bf50f42e8.1585761021.git.jpoimboe@redhat.com
Historically, the relocation symbols for ORC entries have only been
section symbols:
.text+0: sp:sp+8 bp:(und) type:call end:0
However, the Clang assembler is aggressive about stripping section
symbols. In that case we will need to use function symbols:
freezing_slow_path+0: sp:sp+8 bp:(und) type:call end:0
In preparation for the generation of such entries in "objtool orc
generate", add support for reading them in "objtool orc dump".
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/b811b5eb1a42602c3b523576dc5efab9ad1c174d.1585761021.git.jpoimboe@redhat.com
CONFIG_UBSAN_TRAP causes GCC to emit a UD2 whenever it encounters an
unreachable code path. This includes __builtin_unreachable(). Because
the BUG() macro uses __builtin_unreachable() after it emits its own UD2,
this results in a double UD2. In this case objtool rightfully detects
that the second UD2 is unreachable:
init/main.o: warning: objtool: repair_env_string()+0x1c8: unreachable instruction
We weren't able to figure out a way to get rid of the double UD2s, so
just silence the warning.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/6653ad73c6b59c049211bd7c11ed3809c20ee9f5.1585761021.git.jpoimboe@redhat.com
Add explicitly invoked KCSAN check functions to objtool's uaccess
whitelist. This is needed in order to permit calling into
kcsan_check_scoped_accesses() from the fast-path, which in turn calls
__kcsan_check_access(). __kcsan_check_access() is the generic variant
of the already whitelisted specializations __tsan_{read,write}N.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit d3fd949abd ("selftests: Fix memfd to support relocatable
build (O=objdir)") introduced regression run-time regression with
a change to include programs that should be run from shell scripts
to list of programs that run as independent tests. This fix restores
the original designation.
Fixes: d3fd949abd ("selftests: Fix memfd to support relocatable build (O=objdir)")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Some tests are built only for 64-bit systems. This makes
sure that these tests are built for both big and little
endian variants of powerpc64.
Fixes: 7549b33642 ("selftests: vm: Build/Run 64bit tests only on 64bit arch")
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Independent builds of the vm selftests is currently broken because
commit 7549b33642 ("selftests: vm: Build/Run 64bit tests only on
64bit arch") overrides the value of ARCH with the machine name from
uname. This does not always match the architecture names used for
tasks like header installation.
E.g. for building tests on powerpc64, we need ARCH=powerpc
and not ARCH=ppc64 or ARCH=ppc64le. Otherwise, the build
fails as shown below.
$ uname -m
ppc64le
$ make -C tools/testing/selftests/vm
make: Entering directory '/home/sandipan/linux/tools/testing/selftests/vm'
make --no-builtin-rules ARCH=ppc64le -C ../../../.. headers_install
make[1]: Entering directory '/home/sandipan/linux'
Makefile:653: arch/ppc64le/Makefile: No such file or directory
make[1]: *** No rule to make target 'arch/ppc64le/Makefile'. Stop.
make[1]: Leaving directory '/home/sandipan/linux'
../lib.mk:50: recipe for target 'khdr' failed
make: *** [khdr] Error 2
make: Leaving directory '/home/sandipan/linux/tools/testing/selftests/vm'
Fixes: 7549b33642 ("selftests: vm: Build/Run 64bit tests only on 64bit arch")
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl6TbaUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhgkH/iWpiKvosA20HJjC
rBqYeJPxQsgZTuBieWJ+MeVxbpcF7RlM4c+glyvg3QJhHwIEG58dl6LBrQbAyBAR
aFHNojr1iAYOruVCGnU3pA008YZiwUIDv/ZQ4DF8fmIU2vI2mJ6qHBv3XDl4G2uR
Nwz8Eu9AgIwZM5coomVOSmoWyFy7Vxmb7W+3t5VmKsvOWx4ib9kyQtOIkvQDEl7j
XCbWfI0xDQr6LFOm4jnCi5R/LhJ2LIqqIvHHrunbpszM8IwK797jCXz4im+dmd5Y
+km46N7a8pDqri36xXz1gdBAU3eG7Pt1NyvfjwRVTdX4GquQ2MT0GoojxbLxUP3y
3pEsQuE=
=whbL
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh
Resolve these conflicts:
arch/x86/Kconfig
arch/x86/kernel/Makefile
Do a minor "evil merge" to move the KCSAN entry up a bit by a few lines
in the Kconfig to reduce the probability of future conflicts.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y,
which allows us to remove the lib-ksyms.o workaround, and to
solve the last known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler
tests in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
-----BEGIN PGP SIGNATURE-----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=jpyF
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
allows us to remove the lib-ksyms.o workaround, and to solve the last
known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler tests
in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
kbuild: fix comment about missing include guard detection
kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
kbuild: replace AS=clang with LLVM_IAS=1
kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
Documentation/llvm: fix the name of llvm-size
kbuild: mkcompile_h: Include $LD version in /proc/version
kconfig: qconf: Fix a few alignment issues
kconfig: qconf: remove some old bogus TODOs
kconfig: qconf: fix support for the split view mode
kconfig: qconf: fix the content of the main widget
kconfig: qconf: Change title for the item window
kconfig: qconf: clean deprecated warnings
gcc-plugins: drop support for GCC <= 4.7
kbuild: Enable -Wtautological-compare
x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
...
For security reasons I stopped using gmail account and kernel address is
now up-to-date alias to my personal address.
People periodically send me emails to address which they found in source
code of drivers, so this change reflects state where people can contact
me.
[ Added .mailmap entry as per Joe Perches - Linus ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Test that request_module() fails with -ENOENT when
/proc/sys/kernel/modprobe contains (a) a nonexistent path, and (b) an
empty path.
Case (b) is a regression test for the patch "kmod: make request_module()
return an error when autoloading is disabled".
Tested with 'kmod.sh -t 0010 && kmod.sh -t 0011', and also simply with
'kmod.sh' to run all kmod tests.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200312202552.241885-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal. Fix it by stripping the leading zeroes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Borkmann says:
====================
pull-request: bpf 2020-04-10
The following pull-request contains BPF updates for your *net* tree.
We've added 13 non-merge commits during the last 7 day(s) which contain
a total of 13 files changed, 137 insertions(+), 43 deletions(-).
The main changes are:
1) JIT code emission fixes for riscv and arm32, from Luke Nelson and Xi Wang.
2) Disable vmlinux BTF info if GCC_PLUGIN_RANDSTRUCT is used, from Slava Bacherikov.
3) Fix oob write in AF_XDP when meta data is used, from Li RongQing.
4) Fix bpf_get_link_xdp_id() handling on single prog when flags are specified,
from Andrey Ignatov.
5) Fix sk_assign() BPF helper for request sockets that can have sk_reuseport
field uninitialized, from Joe Stringer.
6) Fix mprotect() test case for the BPF LSM, from KP Singh.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- A fix for a crash in machine check handling on pseries (ie. guests)
- A small series to make it possible to disable CONFIG_COMPAT, and turn it off
by default for ppc64le where it's not used.
- A few other miscellaneous fixes and small improvements.
Thanks to:
Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann, Christophe Leroy, Dan
Carpenter, Ganesh Goudar, Geert Uytterhoeven, Geoff Levand, Mahesh Salgaonkar,
Markus Elfring, Michal Suchanek, Nicholas Piggin, Stephen Boyd, Wen Xiong.
-----BEGIN PGP SIGNATURE-----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=72sb
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"The bulk of this is the series to make CONFIG_COMPAT user-selectable,
it's been around for a long time but was blocked behind the
syscall-in-C series.
Plus there's also a few fixes and other minor things.
Summary:
- A fix for a crash in machine check handling on pseries (ie. guests)
- A small series to make it possible to disable CONFIG_COMPAT, and
turn it off by default for ppc64le where it's not used.
- A few other miscellaneous fixes and small improvements.
Thanks to: Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann,
Christophe Leroy, Dan Carpenter, Ganesh Goudar, Geert Uytterhoeven,
Geoff Levand, Mahesh Salgaonkar, Markus Elfring, Michal Suchanek,
Nicholas Piggin, Stephen Boyd, Wen Xiong"
* tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Always build the tm-poison test 64-bit
powerpc: Improve ppc_save_regs()
Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"
powerpc/time: Replace <linux/clk-provider.h> by <linux/of_clk.h>
powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory
powerpc/perf: split callchain.c by bitness
powerpc/64: Make COMPAT user-selectable disabled on littleendian by default.
powerpc/64: make buildable without CONFIG_COMPAT
powerpc/perf: consolidate valid_user_sp -> invalid_user_sp
powerpc/perf: consolidate read_user_stack_32
powerpc: move common register copy functions from signal_32.c to signal.c
powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro
powerpc/ps3: Set CONFIG_UEVENT_HELPER=y in ps3_defconfig
powerpc/ps3: Remove an unneeded NULL check
powerpc/ps3: Remove duplicate error message
powerpc/powernv: Re-enable imc trace-mode in kernel
powerpc/perf: Implement a global lock to avoid races between trace, core and thread imc events.
powerpc/pseries: Fix MCE handling on pseries
selftests/eeh: Skip ahci adapters
powerpc/64s: Fix doorbell wakeup msgclr optimisation
- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach in
the platform-memory subsystem before the platform will consider them
power-fail protected.
- Promote numa_map_to_online_node() to a cross-kernel generic facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit test
compilation fixups.
- Fixup some flexible-array declarations.
-----BEGIN PGP SIGNATURE-----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=sY4N
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and dax updates from Dan Williams:
"There were multiple touches outside of drivers/nvdimm/ this round to
add cross arch compatibility to the devm_memremap_pages() interface,
enhance numa information for persistent memory ranges, and add a
zero_page_range() dax operation.
This cycle I switched from the patchwork api to Konstantin's b4 script
for collecting tags (from x86, PowerPC, filesystem, and device-mapper
folks), and everything looks to have gone ok there. This has all
appeared in -next with no reported issues.
Summary:
- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach
in the platform-memory subsystem before the platform will consider
them power-fail protected.
- Promote numa_map_to_online_node() to a cross-kernel generic
facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit
test compilation fixups.
- Fixup some flexible-array declarations"
* tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits)
dax: Move mandatory ->zero_page_range() check in alloc_dax()
dax,iomap: Add helper dax_iomap_zero() to zero a range
dax: Use new dax zero page method for zeroing a page
dm,dax: Add dax zero_page_range operation
s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver
dax, pmem: Add a dax operation zero_page_range
pmem: Add functions for reading/writing page to/from pmem
libnvdimm: Update persistence domain value for of_pmem and papr_scm device
tools/test/nvdimm: Fix out of tree build
libnvdimm/region: Fix build error
libnvdimm/region: Replace zero-length array with flexible-array member
libnvdimm/label: Replace zero-length array with flexible-array member
ACPI: NFIT: Replace zero-length array with flexible-array member
libnvdimm/region: Introduce an 'align' attribute
libnvdimm/region: Introduce NDD_LABELING
libnvdimm/namespace: Enforce memremap_compat_align()
libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid
libnvdimm: Out of bounds read in __nd_ioctl()
acpi/nfit: improve bounds checking for 'func'
mm/memremap_pages: Introduce memremap_compat_align()
...
As Documentation/kbuild/llvm.rst implies, building the kernel with a
full set of LLVM tools gets very verbose and unwieldy.
Provide a single switch LLVM=1 to use Clang and LLVM tools instead
of GCC and Binutils. You can pass it from the command line or as an
environment variable.
Please note LLVM=1 does not turn on the integrated assembler. You need
to pass LLVM_IAS=1 to use it. When the upstream kernel is ready for the
integrated assembler, I think we can make it default.
We discussed what we need, and we agreed to go with a simple boolean
flag that switches both target and host tools:
https://lkml.org/lkml/2020/3/28/494https://lkml.org/lkml/2020/4/3/43
Some items discussed, but not adopted:
- LLVM_DIR
When multiple versions of LLVM are installed, I just thought supporting
LLVM_DIR=/path/to/my/llvm/bin/ might be useful.
CC = $(LLVM_DIR)clang
LD = $(LLVM_DIR)ld.lld
...
However, we can handle this by modifying PATH. So, we decided to not do
this.
- LLVM_SUFFIX
Some distributions (e.g. Debian) package specific versions of LLVM with
naming conventions that use the version as a suffix.
CC = clang$(LLVM_SUFFIX)
LD = ld.lld(LLVM_SUFFIX)
...
will allow a user to pass LLVM_SUFFIX=-11 to use clang-11 etc.,
but the suffixed versions in /usr/bin/ are symlinks to binaries in
/usr/lib/llvm-#/bin/, so this can also be handled by PATH.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Some bug fixes.
The new vdpa subsystem with two first drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl6MS7wPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpGp8H/2H49Gya1cfVbGU13qgmBSQqQXC8hS3iNLuG
ltRgU+jafJT//kvkdm3/DUzfK3eRUWUfqZLKEbAQDtMY0OGHi/KGEBYVLDde7Zxt
Lg4VnwBhkYDR/f01ZZDbHxzj9JAr83i28nILjLIqf3a1BX4zf203+ZE0/JM8a7wL
dOPoH7NAfyz5ul2F67bR1IOF8vC6TidpavzR2+HC/MocHYXb6Bgfvt+i4EcrfuMf
9lnBfajgklKr9sNJniwvvR1pWVg+YyG3VeC6T8tIC/xzbCmIoNT+5b3q2XPSIHq1
EuQTeXH9CBFXS0qcFlq2ktR1xd1Lx95hKwZpqLwLFDmfgjhV2QU=
=/84P
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- Some bug fixes
- The new vdpa subsystem with two first drivers
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM"
vdpa: move to drivers/vdpa
virtio: Intel IFC VF driver for VDPA
vdpasim: vDPA device simulator
vhost: introduce vDPA-based backend
virtio: introduce a vDPA based transport
vDPA: introduce vDPA bus
vringh: IOTLB support
vhost: factor out IOTLB
vhost: allow per device message handler
vhost: refine vhost and vringh kconfig
virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM
virtio-net: Introduce hash report feature
virtio-net: Introduce RSS receive steering feature
virtio-net: Introduce extended RSC feature
tools/virtio: option to build an out of tree module
- Add interrupt support on the rcar sensor (Niklas Söderlund)
- Add a new Spreadtrum thermal driver (Baolin Wang)
- Add thermal binding for the fsl scu board, a new API to retrieve the
sensor id bound to the thermal zone and i.MX system controller
sensor (Anson Huang))
- Remove warning log when a deferred probe is requested on Exynos
(Marek Szyprowski)
- Add the thermal monitoring unit support for imx8mm with its DT
bindings (Anson Huang)
- Rephrase the Kconfig text for clarity (Linus Walleij)
- Use the gpio descriptor for the ti-soc-thermal (Linus Walleij)
- Align msg structure to 4 bytes for i.MX SC, fix the Kconfig
dependency, add the __may_be unused annotation for PM functions and
the COMPILE_TEST option for imx8mm (Anson Huang)
- Fix a dependency on regmap in Kconfig for qoriq (Yuantian Tang)
- Add DT binding and support for the rcar gen3 r8a77961 and improve
the error path on the rcar init function (Niklas Söderlund)
- Cleanup and improvements for the tsens Qcom sensor (Amit Kucheria)
- Improve code by removing lock and caching values in the rcar thermal
sensor (Niklas Söderlund)
- Cleanup in the qoriq drivers and add a call to
imx_thermal_unregister_legacy_cooling in the removal function (Anson
Huang)
- Remove redundant 'maxItems' in tsens and sprd DT bindings (Rob Herring)
- Change the thermal DT bindings by making the cooling-maps optional
(Yuantian Tang)
- Add Tiger Lake support (Sumeet Pawnikar)
- Use scnprintf() for avoiding potential buffer overflow (Takashi Iwai)
- Make pkg_temp_lock a raw_spinlock_t(Clark Williams)
- Fix incorrect data types by changing them to signed on i.MX SC (Anson Huang)
- Replace zero-length array with flexible-array member (Gustavo A. R. Silva)
- Add support for i.MX8MP in the driver and in the DT bindings (Anson Huang)
- Fix return value of the cpufreq_set_cur_state() function (Willy Wolff)
- Remove abusing and scary WARN_ON in the cpufreq cooling device
(Daniel Lezcano)
- Fix build warning of incorrect argument type reported by sparse on
imx8mm (Anson Huang)
- Fix stub for the devfreq cooling device (Martin Blumenstingl)
- Fix cpu idle cooling documentation (Sergey Vidishev)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl6MXkEACgkQqDIjiipP
6E+BIggAh52YBU8D8GthsvCPTgka95+wAIaZtx4Y7UnhvshHhM2w+m97TQOXK373
95mwO9mwQuAoksSmLo7pBQYJ7HItQ26Yoq9akpOL6EiT+BEWiqoHJgl+afVVtoKa
n67d3Pa6coup1+PQNIA8kpTIOmUQTP8THtwpZ3HlChWsg22NTd0QUGpGJ1TtBD/q
KqMdQjxahFJ4RTYsnECWBkw3EMkczMNMgdrXEvm4rMkcaJzv9g2ZPqerOShK/RzP
8sejWczt6jaRwu4hLpd/lLikTSHZoXMFJ8ylAiQXFELCPAQIrMS/ae+dTGJ4qP7x
hkjsewPbeA1Z+al/IBVHiCtOzKkICQ==
=XDYl
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Convert tsens configuration DT binding to yaml (Rajeshwari)
- Add interrupt support on the rcar sensor (Niklas Söderlund)
- Add a new Spreadtrum thermal driver (Baolin Wang)
- Add thermal binding for the fsl scu board, a new API to retrieve the
sensor id bound to the thermal zone and i.MX system controller sensor
(Anson Huang))
- Remove warning log when a deferred probe is requested on Exynos
(Marek Szyprowski)
- Add the thermal monitoring unit support for imx8mm with its DT
bindings (Anson Huang)
- Rephrase the Kconfig text for clarity (Linus Walleij)
- Use the gpio descriptor for the ti-soc-thermal (Linus Walleij)
- Align msg structure to 4 bytes for i.MX SC, fix the Kconfig
dependency, add the __may_be unused annotation for PM functions and
the COMPILE_TEST option for imx8mm (Anson Huang)
- Fix a dependency on regmap in Kconfig for qoriq (Yuantian Tang)
- Add DT binding and support for the rcar gen3 r8a77961 and improve the
error path on the rcar init function (Niklas Söderlund)
- Cleanup and improvements for the tsens Qcom sensor (Amit Kucheria)
- Improve code by removing lock and caching values in the rcar thermal
sensor (Niklas Söderlund)
- Cleanup in the qoriq drivers and add a call to
imx_thermal_unregister_legacy_cooling in the removal function (Anson
Huang)
- Remove redundant 'maxItems' in tsens and sprd DT bindings (Rob
Herring)
- Change the thermal DT bindings by making the cooling-maps optional
(Yuantian Tang)
- Add Tiger Lake support (Sumeet Pawnikar)
- Use scnprintf() for avoiding potential buffer overflow (Takashi Iwai)
- Make pkg_temp_lock a raw_spinlock_t(Clark Williams)
- Fix incorrect data types by changing them to signed on i.MX SC (Anson
Huang)
- Replace zero-length array with flexible-array member (Gustavo A. R.
Silva)
- Add support for i.MX8MP in the driver and in the DT bindings (Anson
Huang)
- Fix return value of the cpufreq_set_cur_state() function (Willy
Wolff)
- Remove abusing and scary WARN_ON in the cpufreq cooling device
(Daniel Lezcano)
- Fix build warning of incorrect argument type reported by sparse on
imx8mm (Anson Huang)
- Fix stub for the devfreq cooling device (Martin Blumenstingl)
- Fix cpu idle cooling documentation (Sergey Vidishev)
* tag 'thermal-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (52 commits)
Documentation: cpu-idle-cooling: Fix diagram for 33% duty cycle
thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n
thermal: imx8mm: Fix build warning of incorrect argument type
thermal/drivers/cpufreq_cooling: Remove abusing WARN_ON
thermal/drivers/cpufreq_cooling: Fix return of cpufreq_set_cur_state
thermal: imx8mm: Add i.MX8MP support
dt-bindings: thermal: imx8mm-thermal: Add support for i.MX8MP
thermal: qcom: tsens.h: Replace zero-length array with flexible-array member
thermal: imx_sc_thermal: Fix incorrect data type
thermal: int340x_thermal: Use scnprintf() for avoiding potential buffer overflow
thermal: int340x: processor_thermal: Add Tiger Lake support
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
dt-bindings: thermal: make cooling-maps property optional
dt-bindings: thermal: qcom-tsens: Remove redundant 'maxItems'
dt-bindings: thermal: sprd: Remove redundant 'maxItems'
thermal: imx: Calling imx_thermal_unregister_legacy_cooling() in .remove
thermal: qoriq: Sort includes alphabetically
thermal: qoriq: Use devm_add_action_or_reset() to handle all cleanups
thermal: rcar_thermal: Remove lock in rcar_thermal_get_current_temp()
thermal: rcar_thermal: Do not store ctemp in rcar_thermal_priv
...
In set_operation_mode() function remove duplicated check for args.list
parameter, which is already done one line before.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add xdp_info selftest that makes sure that bpf_get_link_xdp_id returns
valid prog_id for different input modes:
* w/ and w/o flags when no program is attached;
* w/ and w/o flags when one program is attached.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/2a9a6d1ce33b91ccc1aa3de6dba2d309f2062811.1586236080.git.rdna@fb.com
Currently if one of XDP_FLAGS_{DRV,HW,SKB}_MODE flags is passed to
bpf_get_link_xdp_id() and there is a single XDP program attached to
ifindex, that program's id will be returned by bpf_get_link_xdp_id() in
prog_id argument no matter what mode the program is attached in, i.e.
flags argument is not taken into account.
For example, if there is a single program attached with
XDP_FLAGS_SKB_MODE but user calls bpf_get_link_xdp_id() with flags =
XDP_FLAGS_DRV_MODE, that skb program will be returned.
Fix it by returning info->prog_id only if user didn't specify flags. If
flags is specified then return corresponding mode-specific-field from
struct xdp_link_info.
The initial error was introduced in commit 50db9f0731 ("libbpf: Add a
support for getting xdp prog id on ifindex") and then refactored in
473f4e133a so 473f4e133a is used in the Fixes tag.
Fixes: 473f4e133a ("libbpf: Add bpf_get_link_xdp_info() function to get more XDP information")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/0e9e30490b44b447bb2bebc69c7135e7fe7e4e40.1586236080.git.rdna@fb.com
This testcase repeats epollbug.c from the bug:
https://bugzilla.kernel.org/show_bug.cgi?id=205933
What it tests? It tests the race between epoll_ctl() and epoll_wait().
New event mask passed to epoll_ctl() triggers wake up, which can be missed
because of the bug described in the link. Reproduction is 100%, so easy
to fix. Kudos, Max, for wonderful test case.
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Max Neunhoeffer <max@arangodb.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Christopher Kohlhoff <chris.kohlhoff@clearpool.io>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jes Sorensen <jes.sorensen@gmail.com>
Link: http://lkml.kernel.org/r/20200214170211.561524-2-rpenyaev@suse.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Leave blank space between the right-hand and left-hand side of the
assignment to meet the kernel coding style better.
Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Link: http://lkml.kernel.org/r/1582621140-25850-1-git-send-email-qiwuchen55@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add uffd tests for write protection.
Instead of introducing new tests for it, let's simply squashing uffd-wp
tests into existing uffd-missing test cases. Changes are:
(1) Bouncing tests
We do the write-protection in two ways during the bouncing test:
- By using UFFDIO_COPY_MODE_WP when resolving MISSING pages: then
we'll make sure for each bounce process every single page will be
at least fault twice: once for MISSING, once for WP.
- By direct call UFFDIO_WRITEPROTECT on existing faulted memories:
To further torture the explicit page protection procedures of
uffd-wp, we split each bounce procedure into two halves (in the
background thread): the first half will be MISSING+WP for each
page as explained above. After the first half, we write protect
the faulted region in the background thread to make sure at least
half of the pages will be write protected again which is the first
half to test the new UFFDIO_WRITEPROTECT call. Then we continue
with the 2nd half, which will contain both MISSING and WP faulting
tests for the 2nd half and WP-only faults from the 1st half.
(2) Event/Signal test
Mostly previous tests but will do MISSING+WP for each page. For
sigbus-mode test we'll need to provide standalone path to handle the
write protection faults.
For all tests, do statistics as well for uffd-wp pages.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20200220163112.11409-20-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce uffd_stats structure for statistics of the self test, at the
same time refactor the code to always pass in the uffd_stats for either
read() or poll() typed fault handling threads instead of using two
different ways to return the statistic results. No functional change.
With the new structure, it's very easy to introduce new statistics.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20200220163112.11409-19-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Builds of Fedora's kernel-tools package started to fail with "may be
used uninitialized" warnings for nl_pid in bpf_set_link_xdp_fd() and
bpf_get_link_xdp_info() on the s390 architecture.
Although libbpf_netlink_open() always returns a negative number when it
does not set *nl_pid, the compiler does not determine this and thus
believes the variable might be used uninitialized. Assuage gcc's fears
by explicitly initializing nl_pid.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1807781
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200404051430.698058-1-jcline@redhat.com
core:
- Support for cgroup tracking in samples to allow cgroup based
analysis
tools:
- Support for cgroup analysis
- Commandline option and hotkey for perf top to change the sort order
- A set of fixes all over the place
- Various build system related improvements
- Updates of the X86 pmu event JSON data
- Documentation updates
-----BEGIN PGP SIGNATURE-----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=2UUD
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more perf updates from Thomas Gleixner:
"Perf updates all over the place:
core:
- Support for cgroup tracking in samples to allow cgroup based
analysis
tools:
- Support for cgroup analysis
- Commandline option and hotkey for perf top to change the sort order
- A set of fixes all over the place
- Various build system related improvements
- Updates of the X86 pmu event JSON data
- Documentation updates"
* tag 'perf-urgent-2020-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
perf python: Fix clang detection to strip out options passed in $CC
perf tools: Support Python 3.8+ in Makefile
perf script: Fix invalid read of directory entry after closedir()
perf script report: Fix SEGFAULT when using DWARF mode
perf script: add -S/--symbols documentation
perf pmu-events x86: Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric
perf events parser: Add missing Intel CPU events to parser
perf script: Allow --symbol to accept hexadecimal addresses
perf report/top TUI: Fix title line formatting
perf top: Support hotkey to change sort order
perf top: Support --group-sort-idx to change the sort order
perf symbols: Fix arm64 gap between kernel start and module end
perf build-test: Honour JOBS to override detection of number of cores
perf script: Add --show-cgroup-events option
perf top: Add --all-cgroups option
perf record: Add --all-cgroups option
perf record: Support synthesizing cgroup events
perf report: Add 'cgroup' sort key
perf cgroup: Maintain cgroup hierarchy
perf tools: Basic support for CGROUP event
...
- A large series from Nick for 64-bit to further rework our exception vectors,
and rewrite portions of the syscall entry/exit and interrupt return in C. The
result is much easier to follow code that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had become badly
intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings from the
workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and update the
status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to:
Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET,
Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David
Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R.
Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie
Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger,
Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira,
Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers,
Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi
Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek,
Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen
Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=ARdm
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Slightly late as I had to rebase mid-week to insert a bug fix:
- A large series from Nick for 64-bit to further rework our exception
vectors, and rewrite portions of the syscall entry/exit and
interrupt return in C. The result is much easier to follow code
that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had
become badly intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings
from the workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and
update the status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew
Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen
Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement
Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas,
Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman,
Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara,
Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor,
Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael
Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick
Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat,
Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff,
Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G
Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel
Datwyler, Vaibhav Jain, YueHaibing"
* tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
powerpc: Make setjmp/longjmp signature standard
powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type
powerpc: Suppress .eh_frame generation
powerpc: Drop -fno-dwarf2-cfi-asm
powerpc/32: drop unused ISA_DMA_THRESHOLD
powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces
selftests/powerpc: Fix try-run when source tree is not writable
powerpc/vmlinux.lds: Explicitly retain .gnu.hash
powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
powerpc/ptrace: create ppc_gethwdinfo()
powerpc/ptrace: create ptrace_get_debugreg()
powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
powerpc/ptrace: move register viewing functions out of ptrace.c
powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
powerpc/ptrace: split out SPE related functions.
powerpc/ptrace: split out ALTIVEC related functions.
powerpc/ptrace: split out VSX related functions.
powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
powerpc/ptrace: remove unused header includes
...
- The ring buffer is no longer disabled when reading the trace file.
The trace_pipe file was made to be used for live tracing and reading
as it acted like the normal producer/consumer. As the trace file
would not consume the data, the easy way of handling it was to just
disable writes to the ring buffer. This came to a surprise to the
BPF folks who complained about lost events due to reading.
This is no longer an issue. If someone wants to keep the old disabling
there's a new option "pause-on-trace" that can be set.
- New set_ftrace_notrace_pid file. PIDs in this file will not be traced
by the function tracer. Similar to set_ftrace_pid, which makes the
function tracer only trace those tasks with PIDs in the file, the
set_ftrace_notrace_pid does the reverse.
- New set_event_notrace_pid file. PIDs in this file will cause events
not to be traced if triggered by a task with a matching PID.
Similar to the set_event_pid file but will not be traced.
Note, sched_waking and sched_switch events may still be trace if
one of the tasks referenced by those events contains a PID that
is allowed to be traced.
Tracing related features:
- New bootconfig option, that is attached to the initrd file.
If bootconfig is on the command line, then the initrd file
is searched looking for a bootconfig appended at the end.
- New GPU tracepoint infrastructure to help the gfx drivers to get
off debugfs (acked by Greg Kroah-Hartman)
Other minor updates and fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXokgWRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgrHAP0UkKs/52JY4oWa3OIh/OqK+vnCrIwz
zGvDFOYM0fKbwgD9FZWgzlcaYK5m2Cxlhp4VoraZveHMLJUhnEHtdX6X0wk=
=Rebj
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New tracing features:
- The ring buffer is no longer disabled when reading the trace file.
The trace_pipe file was made to be used for live tracing and
reading as it acted like the normal producer/consumer. As the trace
file would not consume the data, the easy way of handling it was to
just disable writes to the ring buffer.
This came to a surprise to the BPF folks who complained about lost
events due to reading. This is no longer an issue. If someone wants
to keep the old disabling there's a new option "pause-on-trace"
that can be set.
- New set_ftrace_notrace_pid file. PIDs in this file will not be
traced by the function tracer.
Similar to set_ftrace_pid, which makes the function tracer only
trace those tasks with PIDs in the file, the set_ftrace_notrace_pid
does the reverse.
- New set_event_notrace_pid file. PIDs in this file will cause events
not to be traced if triggered by a task with a matching PID.
Similar to the set_event_pid file but will not be traced. Note,
sched_waking and sched_switch events may still be traced if one of
the tasks referenced by those events contains a PID that is allowed
to be traced.
Tracing related features:
- New bootconfig option, that is attached to the initrd file.
If bootconfig is on the command line, then the initrd file is
searched looking for a bootconfig appended at the end.
- New GPU tracepoint infrastructure to help the gfx drivers to get
off debugfs (acked by Greg Kroah-Hartman)
And other minor updates and fixes"
* tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
tracing: Do not allocate buffer in trace_find_next_entry() in atomic
tracing: Add documentation on set_ftrace_notrace_pid and set_event_notrace_pid
selftests/ftrace: Add test to test new set_event_notrace_pid file
selftests/ftrace: Add test to test new set_ftrace_notrace_pid file
tracing: Create set_event_notrace_pid to not trace tasks
ftrace: Create set_ftrace_notrace_pid to not trace tasks
ftrace: Make function trace pid filtering a bit more exact
ftrace/kprobe: Show the maxactive number on kprobe_events
tracing: Have the document reflect that the trace file keeps tracing enabled
ring-buffer/tracing: Have iterator acknowledge dropped events
tracing: Do not disable tracing when reading the trace file
ring-buffer: Do not disable recording when there is an iterator
ring-buffer: Make resize disable per cpu buffer instead of total buffer
ring-buffer: Optimize rb_iter_head_event()
ring-buffer: Do not die if rb_iter_peek() fails more than thrice
ring-buffer: Have rb_iter_head_event() handle concurrent writer
ring-buffer: Add page_stamp to iterator for synchronization
ring-buffer: Rename ring_buffer_read() to read_buffer_iter_advance()
ring-buffer: Have ring_buffer_empty() not depend on tracing stopped
tracing: Save off entry when peeking at next entry
...
Core and userspace API:
- The userspace API KFIFOs have been imoproved with locks that
do not block interrupts. This makes us better at getting
events to userspace without blocking or disturbing new events
arriving in the same time. This was reviewed by the KFIFO
maintainer Stefani. This is a generic improvement which
paves the road for similar improvements in other subsystems.
- We provide a new ioctl() for monitoring changes in the line
information, such as when multiple clients are taking lines
and giving them back, possibly reconfiguring them in the
process: we can now monitor that and not get stuck with stale
static information.
- An example tool 'gpio-watch' is provided to showcase this
functionality.
- Timestamps for events are switched to ktime_get_ns() which is
monotonic. We previously had a 'realtime' stamp which could
move forward and *backward* in time, which probably would just
cause silent bugs and weird behaviour. In the long run we
see two relevant timestamps: ktime_get_ns() or the timestamp
sometimes provided by the GPIO hardware itself, if that
exists.
- Device Tree overlay support for GPIO hogs. On systems that
load overlays, these overlays can now contain hogs, and will
then be respected.
- Handle pin control interaction with nonexisting pin ranges
in the GPIO library core instead of in the individual
drivers.
New drivers:
- New driver for the Mellanox BlueField 2 GPIO controller.
Driver improvements:
- Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic
MMIO GPIO library and use this flag in the MT7621 driver.
- Texas Instruments OMAP CPU power management improvements,
such as blocking of idle on pending GPIO interrupts.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl6IWUAACgkQQRCzN7AZ
XXPReQ//WUHALqbLOL/DZR8kVyygVZXV8JC4jcuMQgX+Mvm1DQuGp1T8VPlG1wC7
vy5eTz3oPc+jAaHGQgGiSGdPRQtDkAW5+Wo4hzcHJ5ATlzT7cgNywK3Jk6+YlPlF
CuhHB6aPEymQ45/GseUwEb5AuWWKS03P3XdOBj2IdDhuRHRfyjHi+31s0lh6bfNs
kC2eP+VtddVqLbOdPE1GKjZi+Iq9ffFRmiNTduHbl3o6ZoE6WnMvn2wsC6zPpJr4
AM8zpj9JFUq1DYaQf8bJJLTm8lItcyyUUhq8oKUxBpecjWfhUYwEYHGxqWIk9fbM
oyJ3zBlU0G7bc4gu1VG3cTacUf//BTmQG3iZNSSw9w17I1hOMX9wNJan22VkEbJD
8X+6AcgkldNwnAVWcVgg1lkfgdxlWURMYXl1uQPQZSj2SQL6gFcdkAhKwlgl8jOi
RctUfZ69tD+4ul2b+MhL6BtIk16o2RIBJF53ESxrR4qftRZ3ywW4JQ/AwNoQalxM
Xg8U3axFm8kitOzemVoXGr/AIee9KpcA4NK8yQLEPmSFgBaVzaVlP9Q7Klr7QGXg
RvK45uRULrWnvSyoVY7Ox+ie1NiG8JAbaxKBxkV8n+z+gVMh82xcyQX+5SgWxwW0
dzeEx1B0mCW4WDAK29CcdQVE6m4K2u/fabhZq5IhgS1mQoTC894=
=EFm/
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO development for the v5.7 kernel cycle.
Core and userspace API:
- The userspace API KFIFOs have been imoproved with locks that do not
block interrupts. This makes us better at getting events to
userspace without blocking or disturbing new events arriving in the
same time. This was reviewed by the KFIFO maintainer Stefani. This
is a generic improvement which paves the road for similar
improvements in other subsystems.
- We provide a new ioctl() for monitoring changes in the line
information, such as when multiple clients are taking lines and
giving them back, possibly reconfiguring them in the process: we
can now monitor that and not get stuck with stale static
information.
- An example tool 'gpio-watch' is provided to showcase this
functionality.
- Timestamps for events are switched to ktime_get_ns() which is
monotonic. We previously had a 'realtime' stamp which could move
forward and *backward* in time, which probably would just cause
silent bugs and weird behaviour. In the long run we see two
relevant timestamps: ktime_get_ns() or the timestamp sometimes
provided by the GPIO hardware itself, if that exists.
- Device Tree overlay support for GPIO hogs. On systems that load
overlays, these overlays can now contain hogs, and will then be
respected.
- Handle pin control interaction with nonexisting pin ranges in the
GPIO library core instead of in the individual drivers.
New drivers:
- New driver for the Mellanox BlueField 2 GPIO controller.
Driver improvements:
- Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic MMIO GPIO
library and use this flag in the MT7621 driver.
- Texas Instruments OMAP CPU power management improvements, such as
blocking of idle on pending GPIO interrupts"
* tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (59 commits)
Revert "gpio: eic-sprd: Use devm_platform_ioremap_resource()"
pinctrl: Unconditionally assign .request()/.free()
gpio: Unconditionally assign .request()/.free()
gpio: export of_pinctrl_get to modules
pinctrl: Define of_pinctrl_get() dummy for !PINCTRL
gpio: Rename variable in core APIs
gpio: Avoid using pin ranges with !PINCTRL
gpiolib: Remove unused gpio_chip parameter from gpio_set_bias()
gpiolib: Pass gpio_desc to gpio_set_config()
gpiolib: Introduce gpiod_set_config()
tools: gpio: Fix out-of-tree build regression
gpio: gpiolib: fix a doc warning
gpio: tegra186: Add Tegra194 pin ranges for GG.0 and GG.1
gpio: tegra186: Add support for pin ranges
gpio: Support GPIO controllers without pin-ranges
ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro
gpio: brcmstb: support gpio-line-names property
tools: gpio: Fix typo in gpio-utils
tools: gpio-hammer: Apply scripts/Lindent and retain good changes
gpiolib: gpio_name_to_desc: factor out !name check
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXoSOqgAKCRCRxhvAZXjc
omfTAQDlbSZkzNfEWcxi+WE9tg+Y5tHR7hjdsK99Mb3vhAh5GwD+LT0EOI3WKoNY
MQUp2RaR7YwWL/pktd9N1EX8qa5IPg4=
=zvBX
-----END PGP SIGNATURE-----
Merge tag 'threads-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread updates from Christian Brauner:
"The main change for this cycle was the extension for clone3() to
support spawning processes directly into cgroups via CLONE_INTO_CGROUP
(commit ef2c41cf38: "clone3: allow spawning processes
into cgroups").
But since I had to touch kernel/cgroup/ quite a bit I had Tejun route
that through his tree this time around to make it easier for him to
handle other changes.
So here is just the unexciting leftovers: a regression test for the
ENOMEM regression we fixed in commit b26ebfe12f ("pid: Fix error
return value in some cases") verifying that we report ENOMEM when
trying to create a new process in a pid namespace whose init
process/subreaper has already exited"
* tag 'threads-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests: add pid namespace ENOMEM regression test
The tm-poison test includes inline asm which is 64-bit only, so the
test must be built 64-bit in order to work.
Otherwise it fails, eg:
# file tm-poison
tm-poison: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV) ...
# ./tm-poison
test: tm_poison_test
Unknown value 0x1fff71150 leaked into f31!
Unknown value 0x1fff710c0 leaked into vr31!
failure: tm_poison_test
Fixes: a003365cab ("powerpc/tm: Add tm-poison test")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200403095656.3772005-1-mpe@ellerman.id.au
perf python:
Arnaldo Carvalho de Melo:
- Fix clang detection to strip out options passed in $CC.
build:
He Zhe:
- Normalize gcc parameter when generating arch errno table, fixing
the build by removing options from $(CC).
Sam Lunt:
- Support Python 3.8+ in Makefile.
perf report/top:
Arnaldo Carvalho de Melo:
- Fix title line formatting.
perf script:
Andreas Gerstmayr:
- Fix SEGFAULT when using DWARF mode.
- Fix invalid read of directory entry after closedir(), found with valgrind.
Hagen Paul Pfeifer:
- Introduce --deltatime option.
Stephane Eranian:
- Allow --symbol to accept hexadecimal addresses.
Ian Rogers:
- Add -S/--symbols documentation
Namhyung Kim:
- Add --show-cgroup-events option.
perf python:
Arnaldo Carvalho de Melo:
- Include rwsem.c in the python binding, needed by the cgroups improvements.
build-test:
Arnaldo Carvalho de Melo:
- Honour JOBS to override detection of number of cores
perf top:
Jin Yao:
- Support --group-sort-idx to change the sort order
- perf top: Support hotkey to change sort order
perf pmu-events x86:
Jin Yao:
- Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric
perf symbols arm64:
Kemeng Shi:
- Fix arm64 gap between kernel start and module end
kernel perf subsystem:
Namhyung Kim:
- Add PERF_RECORD_CGROUP event and Add PERF_SAMPLE_CGROUP feature,
to allow cgroup tracking, saving a link between cgroup path and
its id number.
perf cgroup:
Namhyung Kim:
- Maintain cgroup hierarchy.
perf report:
Namhyung Kim:
- Add 'cgroup' sort key.
perf record:
Namhyung Kim:
- Support synthesizing cgroup events for pre-existing cgroups.
- Add --all-cgroups option
Documentation:
Tony Jones:
- Update docs regarding kernel/user space unwinding.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXodMtwAKCRCyPKLppCJ+
J+leAP0Ws0dGzMSIwcMVc7zvK1IsYOTlZ8lYXJePxD+Po/YPdAEA6Squf4gwZ2wm
b9R7w50dlCkMJ9LaueCeZZjh/4asFwQ=
=auOb
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.7-20200403' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes and improvements from Arnaldo Carvalho de Melo:
perf python:
Arnaldo Carvalho de Melo:
- Fix clang detection to strip out options passed in $CC.
build:
He Zhe:
- Normalize gcc parameter when generating arch errno table, fixing
the build by removing options from $(CC).
Sam Lunt:
- Support Python 3.8+ in Makefile.
perf report/top:
Arnaldo Carvalho de Melo:
- Fix title line formatting.
perf script:
Andreas Gerstmayr:
- Fix SEGFAULT when using DWARF mode.
- Fix invalid read of directory entry after closedir(), found with valgrind.
Hagen Paul Pfeifer:
- Introduce --deltatime option.
Stephane Eranian:
- Allow --symbol to accept hexadecimal addresses.
Ian Rogers:
- Add -S/--symbols documentation
Namhyung Kim:
- Add --show-cgroup-events option.
perf python:
Arnaldo Carvalho de Melo:
- Include rwsem.c in the python binding, needed by the cgroups improvements.
build-test:
Arnaldo Carvalho de Melo:
- Honour JOBS to override detection of number of cores
perf top:
Jin Yao:
- Support --group-sort-idx to change the sort order
- perf top: Support hotkey to change sort order
perf pmu-events x86:
Jin Yao:
- Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric
perf symbols arm64:
Kemeng Shi:
- Fix arm64 gap between kernel start and module end
kernel perf subsystem:
Namhyung Kim:
- Add PERF_RECORD_CGROUP event and Add PERF_SAMPLE_CGROUP feature,
to allow cgroup tracking, saving a link between cgroup path and
its id number.
perf cgroup:
Namhyung Kim:
- Maintain cgroup hierarchy.
perf report:
Namhyung Kim:
- Add 'cgroup' sort key.
perf record:
Namhyung Kim:
- Support synthesizing cgroup events for pre-existing cgroups.
- Add --all-cgroups option
Documentation:
Tony Jones:
- Update docs regarding kernel/user space unwinding.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl6GTQMUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vy3PhAAmqpYBRobOsG8QbmKDjoJEFtkqdvD
z6+4zf/R+hF11RyXjMDwihIe8d+tkQ4eAaYu6Oh5PrTyanz0G0PgeCrivZeytULk
thqQIWzDQMVA5vN/2/Vy8s5s+3HzP8z/MZOFScJ7+xA1MndXptPRTNmFUbjx+GAv
x8/pTp0u9AF6m7itX65DxXvwkzjWamt+Ar4Yx2IcuKAU/M5RtfuZO3PpDnqn7/wk
JFlkRoYeFB6qNnnkPdeyPHl9dALhuhzgdTyklQEnKVW3nf3xThYDhcEwdh6kBQgl
0dH8lL5LXy7PKGN8RES4wB0Vqndw/HlsCF5O4wkkfItbnbJxGJtS139e5973m0ud
sgWvF4yJAT2jCKhIeNz34sePQJMyWALhv0XzZCsJ0YeGHsrV1jrHELkwUT1+eIsT
3UV0iZ6aL06zQJDyKUbbIcQzEQ/wwBC+x9VgsyL54K1quCQZ1N1Nl/dvrb4cRG9m
m9EhJK/brDf4c0uFlOmMTSxV1t5J+z6ZSQnh1ShD/o5yBsxqN6q5brDT6LEs+jbM
LsIkA18jJOd4OyiDs98YiFKvIfFQbQ0LEBQpJwhF0snvfBFMMbUYN/T/NYneWON/
F0TpkFoP7PXDuq55iNaLdnObfzrpC9kdzUyWvePUvjxIl55bkf+/qtUny+H48t4L
dNggvW052d7BHes=
=deWu
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg)
- Add more 32 GT/s link speed decoding and improve the implementation
(Yicong Yang)
Resource management:
- Add support for sizing programmable host bridge apertures and fix a
related alpha Nautilus regression (Ivan Kokshaysky)
Interrupts:
- Add boot interrupt quirk mechanism for Xeon chipsets and document
boot interrupts (Sean V Kelley)
PCIe native device hotplug:
- When possible, disable in-band presence detect and use PDS
(Alexandru Gagniuc)
- Add DMI table for devices that don't use in-band presence detection
but don't advertise that correctly (Stuart Hayes)
- Fix hang when powering slots up/down via sysfs (Lukas Wunner)
- Fix an MSI interrupt race (Stuart Hayes)
Virtualization:
- Add ACS quirks for Zhaoxin devices (Raymond Pang)
Error handling:
- Add Error Disconnect Recover (EDR) support so firmware can report
devices disconnected via DPC and we can try to recover (Kuppuswamy
Sathyanarayanan)
Peer-to-peer DMA:
- Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew
Maier)
ASPM:
- Reduce severity of common clock config message (Chris Packham)
- Clear the correct bits when enabling L1 substates, so we don't go
to the wrong state (Yicong Yang)
Endpoint framework:
- Replace EPF linkup ops with notifier call chain and improve locking
(Kishon Vijay Abraham I)
- Fix concurrent memory allocation in OB address region (Kishon Vijay
Abraham I)
- Move PF function number assignment to EPC core to support multiple
function creation methods (Kishon Vijay Abraham I)
- Fix issue with clearing configfs "start" entry (Kunihiko Hayashi)
- Fix issue with endpoint MSI-X ignoring BAR Indicator and Table
Offset (Kishon Vijay Abraham I)
- Add support for testing DMA transfers (Kishon Vijay Abraham I)
- Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I)
- Add support for tests to clear IRQ (Kishon Vijay Abraham I)
- Add common DT schema for endpoint controllers (Kishon Vijay Abraham I)
Amlogic Meson PCIe controller driver:
- Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi
Pommarel)
- Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi
Pommarel)
Cadence PCIe controller driver:
- Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay
Abraham I)
Intel VMD host bridge driver:
- Add two VMD Device IDs that require bus restriction mode (Sushma
Kalakota)
Mobiveil PCIe controller driver:
- Refactor and modularize mobiveil driver (Hou Zhiqiang)
- Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang)
Microsoft Hyper-V host bridge driver:
- Add support for Hyper-V PCI protocol version 1.3 and
PCI_BUS_RELATIONS2 (Long Li)
- Refactor to prepare for virtual PCI on non-x86 architectures (Boqun
Feng)
- Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Use pci_parse_request_of_pci_ranges() (Rob Herring)
- Add support for endpoint mode and related DT updates (Vidya Sagar)
- Reduce -EPROBE_DEFER error message log level (Thierry Reding)
Qualcomm PCIe controller driver:
- Restrict class fixup to specific Qualcomm devices (Bjorn Andersson)
Synopsys DesignWare PCIe controller driver:
- Refactor core initialization code for endpoint mode (Vidya Sagar)
- Fix endpoint MSI-X to use correct table address (Kishon Vijay
Abraham I)
TI DRA7xx PCIe controller driver:
- Fix MSI IRQ handling (Vignesh Raghavendra)
TI Keystone PCIe controller driver:
- Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I)
Miscellaneous:
- Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng
Feng)
- Use ioremap(), not phys_to_virt(), for platform ROM to fix video
ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)"
* tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits)
misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS
PCI: tegra: Print -EPROBE_DEFER error message at debug level
misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq()
misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
tools: PCI: Add 'e' to clear IRQ
misc: pci_endpoint_test: Add ioctl to clear IRQ
misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt
PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address
PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments
misc: pci_endpoint_test: Add support to get DMA option from userspace
tools: PCI: Add 'd' command line option to support DMA
misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation
PCI: endpoint: functions/pci-epf-test: Print throughput information
PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data
PCI: pciehp: Fix MSI interrupt race
PCI: pciehp: Fix indefinite wait on sysfs requests
PCI: endpoint: Fix clearing start entry in configfs
PCI: tegra: Add support for PCIe endpoint mode in Tegra194
PCI: sysfs: Revert "rescan" file renames
...
Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some reverts
to resolve some reported issues. All is now clean with no reported
problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the last
two reverts, all is calm and good.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodfvA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynzCQCfROhar3E8EhYEqSOP6xq6uhX9uegAnRgGY2rs
rN4JJpOcTddvZcVlD+vo
=ocWk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some
reverts to resolve some reported issues. All is now clean with no
reported problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the
last two reverts, all is calm and good"
* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
Revert "driver core: platform: Initialize dma_parms for platform devices"
Revert "amba: Initialize dma_parms for amba devices"
amba: Initialize dma_parms for amba devices
driver core: platform: Initialize dma_parms for platform devices
bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
bus: mhi: core: Add support for reading MHI info from device
misc: rtsx: set correct pcr_ops for rts522A
speakup: misc: Use dynamic minor numbers for speakup devices
mei: me: add cedar fork device ids
coresight: do not use the BIT() macro in the UAPI header
Documentation: provide IBM contacts for embargoed hardware
nvmem: core: remove nvmem_sysfs_get_groups()
nvmem: core: use is_bin_visible for permissions
nvmem: core: use device_register and device_unregister
nvmem: core: add root_only member to nvmem device struct
extcon: axp288: Add wakeup support
extcon: Mark extcon_get_edev_name() function as exported symbol
extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
...
Here are 3 SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your current
tree, that should be trivial to handle (one file modified by two things,
one file deleted.)
All 3 of these have been in linux-next for a while, with no reported
issues other than the merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
m5AuCzO3Azt9KBi7NL+L
=2Lm5
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
Pull cgroup updates from Tejun Heo:
- Christian extended clone3 so that processes can be spawned into
cgroups directly.
This is not only neat in terms of semantics but also avoids grabbing
the global cgroup_threadgroup_rwsem for migration.
- Daniel added !root xattr support to cgroupfs.
Userland already uses xattrs on cgroupfs for bookkeeping. This will
allow delegated cgroups to support such usages.
- Prateek tried to make cpuset hotplug handling synchronous but that
led to possible deadlock scenarios. Reverted.
- Other minor changes including release_agent_path handling cleanup.
* 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup-v1: Document the cpuset_v2_mode mount option
Revert "cpuset: Make cpuset hotplug synchronous"
cgroupfs: Support user xattrs
kernfs: Add option to enable user xattrs
kernfs: Add removed_size out param for simple_xattr_set
kernfs: kvmalloc xattr value instead of kmalloc
cgroup: Restructure release_agent_path handling
selftests/cgroup: add tests for cloning into cgroups
clone3: allow spawning processes into cgroups
cgroup: add cgroup_may_write() helper
cgroup: refactor fork helpers
cgroup: add cgroup_get_from_file() helper
cgroup: unify attach permission checking
cpuset: Make cpuset hotplug synchronous
cgroup.c: Use built-in RCU list checking
kselftest/cgroup: add cgroup destruction test
cgroup: Clean up css_set task traversal
The clang check in the python setup.py file expected $CC to be just the
name of the compiler, not the compiler + options, i.e. all options were
expected to be passed in $CFLAGS, this ends up making it fail in systems
where CC is set to, e.g.:
"aarch64-linaro-linux-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot"
Like this:
$ python3
>>> from subprocess import Popen
>>> a = Popen(["aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot", "-v"])
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python3.6/subprocess.py", line 729, in __init__
restore_signals, start_new_session)
File "/usr/lib/python3.6/subprocess.py", line 1364, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot': 'aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot'
>>>
Make it more robust, covering this case, by passing cc.split()[0] as the
first arg to popen().
Fixes: a7ffd416d8 ("perf python: Fix clang detection when using CC=clang-version")
Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Daniel Díaz <daniel.diaz@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ilie Halip <ilie.halip@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200401124037.GA12534@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Python 3.8 changed the output of 'python-config --ldflags' to no longer
include the '-lpythonX.Y' flag (this apparently fixed an issue loading
modules with a statically linked Python executable). The libpython
feature check in linux/build/feature fails if the Python library is not
included in FEATURE_CHECK_LDFLAGS-libpython variable.
This adds a check in the Makefile to determine if PYTHON_CONFIG accepts
the '--embed' flag and passes that flag alongside '--ldflags' if so.
tools/perf is the only place the libpython feature check is used.
Signed-off-by: Sam Lunt <samuel.j.lunt@gmail.com>
Tested-by: He Zhe <zhe.he@windriver.com>
Link: http://lore.kernel.org/lkml/c56be2e1-8111-9dfe-8298-f7d0f9ab7431@windriver.com
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: trivial@kernel.org
Cc: stable@kernel.org
Link: http://lore.kernel.org/lkml/20200131181123.tmamivhq4b7uqasr@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
closedir(lang_dir) frees the memory of script_dirent->d_name, which
gets accessed in the next line in a call to scnprintf().
Valgrind report:
Invalid read of size 1
==413557== at 0x483CBE6: strlen (vg_replace_strmem.c:461)
==413557== by 0x4DD45FD: __vfprintf_internal (vfprintf-internal.c:1688)
==413557== by 0x4DE6679: __vsnprintf_internal (vsnprintf.c:114)
==413557== by 0x53A037: vsnprintf (stdio2.h:80)
==413557== by 0x53A037: scnprintf (vsprintf.c:21)
==413557== by 0x435202: get_script_path (builtin-script.c:3223)
==413557== Address 0x52e7313 is 1,139 bytes inside a block of size 32,816 free'd
==413557== at 0x483AA0C: free (vg_replace_malloc.c:540)
==413557== by 0x4E303C0: closedir (closedir.c:50)
==413557== by 0x4351DC: get_script_path (builtin-script.c:3222)
Signed-off-by: Andreas Gerstmayr <agerstmayr@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200402124337.419456-1-agerstmayr@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When running perf script report with a Python script and a callgraph in
DWARF mode, intr_regs->regs can be 0 and therefore crashing the regs_map
function.
Added a check for this condition (same check as in builtin-script.c:595).
Signed-off-by: Andreas Gerstmayr <agerstmayr@redhat.com>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200402125417.422232-1-agerstmayr@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Capture both that this option exists and that symbols can be hexadecimal
addresses.
Signed-off-by: Ian Rogers <irogers@google.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200402174130.140319-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kernel utilization metric does multiplexing currently and is somewhat
unreliable. The problem is that it uses two instances of the fixed counter,
and the kernel has to multipleplex which causes errors. So should use
CPU_CLK_UNHALTED.THREAD instead.
Before:
# perf stat -M Kernel_Utilization -- sleep 1
Performance counter stats for 'sleep 1':
1,419,425 cpu_clk_unhalted.ref_tsc:k
<not counted> cpu_clk_unhalted.ref_tsc (0.00%)
After:
# perf stat -M Kernel_Utilization -- sleep 1
Performance counter stats for 'sleep 1':
746,688 cpu_clk_unhalted.thread:k # 0.7 Kernel_Utilization
1,088,348 cpu_clk_unhalted.thread
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200309013125.7559-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf list expects CPU events to be parseable by name, e.g.
# perf list | grep el-capacity-read
el-capacity-read OR cpu/el-capacity-read/ [Kernel PMU event]
But the event parser does not recognize them that way, e.g.
# perf test -v "Parse event"
<SNIP>
running test 54 'cycles//u'
running test 55 'cycles:k'
running test 0 'cpu/config=10,config1,config2=3,period=1000/u'
running test 1 'cpu/config=1,name=krava/u,cpu/config=2/u'
running test 2 'cpu/config=1,call-graph=fp,time,period=100000/,cpu/config=2,call-graph=no,time=0,period=2000/'
running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2/ukp'
-> cpu/event=0,umask=0x11/
-> cpu/event=0,umask=0x13/
-> cpu/event=0x54,umask=0x1/
failed to parse event 'el-capacity-read:u,cpu/event=el-capacity-read/u', err 1, str 'parser error'
event syntax error: 'el-capacity-read:u,cpu/event=el-capacity-read/u'
\___ parser error test child finished with 1
---- end ----
Parse event definition strings: FAILED!
This happens because the parser splits names by '-' in order to deal
with cache events. For example 'L1-dcache' is a token in
parse-events.l which is matched to 'L1-dcache-load-miss' by the
following rule:
PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT '-' PE_NAME_CACHE_OP_RESULT opt_event_config
And so there is special handling for 2-part PMU names i.e.
PE_PMU_EVENT_PRE '-' PE_PMU_EVENT_SUF sep_dc
but no handling for 3-part names, which are instead added as tokens e.g.
topdown-[a-z-]+
While it would be possible to add a rule for 3-part names, that would
not work if the first parts were also a valid PMU name e.g.
'el-capacity-read' would be matched to 'el-capacity' before the parser
reached the 3rd part.
The parser would need significant change to rationalize all this, so
instead fix for now by adding missing Intel CPU events with 3-part names
to the event parser as tokens.
Missing events were found by using:
grep -r EVENT_ATTR_STR arch/x86/events/intel/core.c
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: http://lore.kernel.org/lkml/90c7ae07-c568-b6d3-f9c4-d0c1528a0610@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch extends the perf script --symbols option to filter on
hexadecimal addresses in addition to symbol names. This makes it easier
to handle cases where symbols are aliased.
With this patch, it is possible to mix and match symbols and hexadecimal
addresses using the --symbols option.
$ perf script --symbols=noploop,0x4007a0
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200325220802.15039-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In d10ec006dc ("perf hists browser: Allow passing an initial hotkey")
the hist_entry__title() call was cut'n'pasted to a function where the
'title' variable is a pointer, not an array, so the sizeof(title)
continues syntactically valid but ends up reducing the real size of the
buffer where to format the first line in the screen to 8 bytes, which
makes the formatting at the title at each refresh to produce just the
string "Samples ", duh, fix it by passing the size of the buffer.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: d10ec006dc ("perf hists browser: Allow passing an initial hotkey")
Link: http://lore.kernel.org/lkml/20200330154314.GB4576@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It would be nice if we can use a hotkey in perf top browser to select a
event for sorting.
For example:
perf top --group -e cycles,instructions,cache-misses
Samples
Overhead Shared Object Symbol
40.03% 45.71% 0.03% div [.] main
20.46% 14.67% 0.21% libc-2.27.so [.] __random_r
20.01% 19.54% 0.02% libc-2.27.so [.] __random
9.68% 10.68% 0.00% div [.] compute_flag
4.32% 4.70% 0.00% libc-2.27.so [.] rand
3.84% 3.43% 0.00% div [.] rand@plt
0.05% 0.05% 2.33% libc-2.27.so [.] __strcmp_sse2_unaligned
0.04% 0.08% 2.43% perf [.] perf_hpp__is_dynamic_en
0.04% 0.02% 6.64% perf [.] rb_next
0.04% 0.01% 3.87% perf [.] dso__find_symbol
0.04% 0.04% 1.77% perf [.] sort__dso_cmp
When user press hotkey '2' (event index, starting from 0), it indicates
to sort output by the third event in group (cache-misses).
Samples
Overhead Shared Object Symbol
4.07% 1.28% 6.68% perf [.] rb_next
3.57% 3.98% 4.11% perf [.] __hists__insert_output
3.67% 11.24% 3.60% perf [.] perf_hpp__is_dynamic_e
3.67% 3.20% 3.20% perf [.] hpp__sort_overhead
0.81% 0.06% 3.01% perf [.] dso__find_symbol
1.62% 5.47% 2.51% perf [.] hists__match
2.70% 1.86% 2.47% libc-2.27.so [.] _int_malloc
0.19% 0.00% 2.29% [kernel] [k] copy_page
0.41% 0.32% 1.98% perf [.] hists__decay_entries
1.84% 3.67% 1.68% perf [.] sort__dso_cmp
0.16% 0.00% 1.63% [kernel] [k] clear_page_erms
Now the output is sorted by cache-misses.
v2:
---
Zero the history if hotkey is pressed.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200324220711.6025-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf report' supports the option --group-sort-idx, which sorts the
output by the event at the index n in event group.
For example:
perf record -e cycles,instructions,cache-misses
perf report --group --group-sort-idx 2 --stdio
The perf-report output is sorted by cache-misses.
This patch supports --group-sort-idx in perf-top.
For example:
perf top --group -e cycles,instructions,cache-misses --group-sort-idx 2
The perf-top output is sorted by cache-misses.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200324220711.6025-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During execution of command 'perf report' in my arm64 virtual machine,
this error message is showed:
failed to process sample
__symbol__inc_addr_samples(860): ENOMEM! sym->name=__this_module,
start=0x1477100, addr=0x147dbd8, end=0x80002000, func: 0
The error is caused with path:
cmd_report
__cmd_report
perf_session__process_events
__perf_session__process_events
ordered_events__flush
__ordered_events__flush
oe->deliver (ordered_events__deliver_event)
perf_session__deliver_event
machines__deliver_event
perf_evlist__deliver_sample
tool->sample (process_sample_event)
hist_entry_iter__add
iter->add_entry_cb(hist_iter__report_callback)
hist_entry__inc_addr_samples
symbol__inc_addr_samples
__symbol__inc_addr_samples
h = annotated_source__histogram(src, evidx) (NULL)
annotated_source__histogram failed is caused with path:
...
hist_entry__inc_addr_samples
symbol__inc_addr_samples
symbol__hists
annotated_source__alloc_histograms
src->histograms = calloc(nr_hists, sizeof_sym_hist) (failed)
Calloc failed as the symbol__size(sym) is too huge. As show in error
message: start=0x1477100, end=0x80002000, size of symbol is about 2G.
This is the same problem as 'perf annotate: Fix s390 gap between kernel
end and module start (b9c0a64901)'. Perf gets symbol information from
/proc/kallsyms in __dso__load_kallsyms. A part of symbol in /proc/kallsyms
from my virtual machine is as follows:
#cat /proc/kallsyms | sort
...
ffff000001475080 d rpfilter_mt_reg [ip6t_rpfilter]
ffff000001475100 d $d [ip6t_rpfilter]
ffff000001475100 d __this_module [ip6t_rpfilter]
ffff000080080000 t _head
ffff000080080000 T _text
ffff000080080040 t pe_header
...
Take line 'ffff000001475100 d __this_module [ip6t_rpfilter]' as example.
The start and end of symbol are both set to ffff000001475100 in
dso__load_all_kallsyms. Then symbols__fixup_end will set the end of symbol
to next big address to ffff000001475100 in /proc/kallsyms, ffff000080080000
in this example. Then sizeof of symbol will be about 2G and cause the
problem.
The start of module in my machine is
ffff000000a62000 t $x [dm_mod]
The start of kernel in my machine is
ffff000080080000 t _head
There is a big gap between end of module and begin of kernel if a samll
amount of memory is used by module. And the last symbol in module will
have a large address range as caotaining the big gap.
Give that the module and kernel text segment sequence may change in
the future, fix this by limiting range of last symbol in module and kernel
to 4K in arch arm64.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hewenliang <hewenliang4@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/33fd24c4-0d5a-9d93-9b62-dffa97c992ca@huawei.com
[ refreshed the patch on current codebase, added string.h include as strchr() is used ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When one does:
$ make -C tools/perf build-test
The makefile in tools/perf/tests/ will, just like the main one, detect
how many cores are in the system and use it with -j.
Sometimes we may need to override that, for instance, when using
icecream or distcc to use multiple machines in the build process, then
we need to, as with the main makefile, use:
$ make JOBS=N -C tools/perf build-test
Fix the tests makefile to honour that.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200330130301.GA31702@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --all-cgroups option is to enable cgroup profiling support. It
tells kernel to record CGROUP events in the ring buffer so that 'perf
top' can identify task/cgroup association later.
Committer testing:
Use:
# perf top --all-cgroups -s cgroup_id,cgroup,pid
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-9-namhyung@kernel.org
Link: http://lore.kernel.org/lkml/20200402015249.3800462-1-namhyung@kernel.org
[ Extracted the HAVE_FILE_HANDLE from the followup patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Synthesize cgroup events by iterating cgroup filesystem directories.
The cgroup event only saves the portion of cgroup path after the mount
point and the cgroup id (which actually is a file handle).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-7-namhyung@kernel.org
Link: http://lore.kernel.org/lkml/20200402015249.3800462-1-namhyung@kernel.org
[ Extracted the HAVE_FILE_HANDLE from the followup patch, added missing __maybe_unused ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cgroup sort key is to show cgroup membership of each task.
Currently it shows full path in the cgroupfs (not relative to the root
of cgroup namespace) since it'd be more intuitive IMHO. Otherwise root
cgroup in different namespaces will all show same name - "/".
The cgroup sort key should come before cgroup_id otherwise
sort_dimension__add() will match it to cgroup_id as it only matches with
the given substring.
For example it will look like following. Note that record patch adding
--all-cgroups patch will come later.
$ perf record -a --namespace --all-cgroups cgtest
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.208 MB perf.data (4090 samples) ]
$ perf report -s cgroup_id,cgroup,pid
...
# Overhead cgroup id (dev/inode) Cgroup Pid:Command
# ........ ..................... .......... ...............
#
93.96% 0/0x0 / 0:swapper
1.25% 3/0xeffffffb / 278:looper0
0.86% 3/0xf000015f /sub/cgrp1 280:cgtest
0.37% 3/0xf0000160 /sub/cgrp2 281:cgtest
0.34% 3/0xf0000163 /sub/cgrp3 282:cgtest
0.22% 3/0xeffffffb /sub 278:looper0
0.20% 3/0xeffffffb / 280:cgtest
0.15% 3/0xf0000163 /sub/cgrp3 285:looper3
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Each cgroup is kept in the perf_env's cgroup_tree sorted by the cgroup
id. Hist entries have cgroup id can compare it directly and later it
can be used to find a group name using this tree.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement basic functionality to support cgroup tracking. Each cgroup
can be identified by inode number which can be read from userspace too.
The actual cgroup processing will come in the later patch.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
[ fix perf test failure on sampling parsing ]
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The file handle (FHANDLE) support is configurable so some systems might not
have it. So add a config feature item to check it on build time so that we
don't add the cgroup tracking feature based on that.
Committer notes:
Had to make the test use the same construct as its later use in
synthetic-events.c, in the next patch in this series. i.e. make it be:
struct {
struct file_handle fh;
uint64_t cgroup_id;
} handle;
To cope with:
CC /tmp/build/perf/util/cloexec.o
util/synthetic-events.c:428:22: error: field 'fh' with CC /tmp/build/perf/util/call-path.o
variable sized type 'struct file_handle' not at the end of a struct or class is a GNU
extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
struct file_handle fh;
^
1 error generated.
Deal with this at some point, i.e. investigate if the right thing is to
remove that -Wgnu-variable-sized-type-not-at-end from our CFLAGS, for
now do the test the same way as it is used looks more sensible.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200402015249.3800462-1-namhyung@kernel.org
[ split from a larger patch, removed blank line at EOF ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll need it for the cgroup patches, and its better to have it in a
separate patch in case we need to later revert the cgroup patches.
I.e. without this we have:
[root@five ~]# perf test -v python
19: 'import perf' in python :
--- start ---
test child forked, pid 148447
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /tmp/build/perf/python/perf.cpython-37m-x86_64-linux-gnu.so: undefined symbol: down_write
test child finished with -1
---- end ----
'import perf' in python: FAILED!
[root@five ~]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200403123606.GC23243@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test was previously using an mprotect on the heap memory allocated
using malloc and was expecting the allocation to be always using
sbrk(2). This is, however, not always true and in certain conditions
malloc may end up using anonymous mmaps for heap alloctions. This means
that the following condition that is used in the "lsm/file_mprotect"
program is not sufficent to detect all mprotect calls done on heap
memory:
is_heap = (vma->vm_start >= vma->vm_mm->start_brk &&
vma->vm_end <= vma->vm_mm->brk);
The test is updated to use an mprotect on memory allocated on the stack.
While this would result in the splitting of the vma, this happens only
after the security_file_mprotect hook. So, the condition used in the BPF
program holds true.
Fixes: 03e54f100d ("bpf: lsm: Add selftests for BPF_PROG_TYPE_LSM")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200402200751.26372-1-kpsingh@chromium.org
* GICv4.1 support
* 32bit host removal
PPC:
* secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
* allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
* New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require bulk
modification of the page tables.
* Initial work on making nested SVM event injection more similar to VMX,
and less buggy.
* Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in function
names which occasionally means eptp, KVM too has standardized on "pgd".
* A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
* Some removal of pointer chasing from kvm_x86_ops, which will also be
switched to static calls as soon as they are available.
* New Tigerlake CPUID features.
* More bugfixes, optimizations and cleanups.
Generic:
* selftests: cleanups, new MMU notifier stress test, steal-time test
* CSV output for kvm_stat.
KVM/MIPS has been broken since 5.5, it does not compile due to a patch committed
by MIPS maintainers. I had already prepared a fix, but the MIPS maintainers
prefer to fix it in generic code rather than KVM so they are taking care of it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6GOnIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfxwf/ZKLZiRoaovXCOG71M/eHtQb8ZIqU
3MPy+On3eC5Sk/aBxWUL9EFZsbYG6kYdbZ1VOvG9XPBoLlnkDSm/IR0kaELHtnjj
oGVda/tvGn46Ne39y8xBptmb91WDcWH0vFthT/CwlMxAw3xjr+gG7Qyo+8F2CW6m
SSSuLiHSBnyO1cQKruBTHZ8qnR8LlnfXEqtd6Y4LFLic0LbLIoIdRcT3wjQrcZrm
Djd7wbTEYZjUfoqZ72ekwEDUsONcDLDSKcguDO9pSMSCGhpxCVT5Vy68KRpoIMs2
nzNWDKjvqQo5zb2+GWxJgkd12Hv+n7PCXZMbVrWBu1pQsewUns9m4mkpGw==
=6fGt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- GICv4.1 support
- 32bit host removal
PPC:
- secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
- allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
- New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require
bulk modification of the page tables.
- Initial work on making nested SVM event injection more similar to
VMX, and less buggy.
- Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in
function names which occasionally means eptp, KVM too has
standardized on "pgd".
- A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
- Some removal of pointer chasing from kvm_x86_ops, which will also
be switched to static calls as soon as they are available.
- New Tigerlake CPUID features.
- More bugfixes, optimizations and cleanups.
Generic:
- selftests: cleanups, new MMU notifier stress test, steal-time test
- CSV output for kvm_stat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
x86/kvm: fix a missing-prototypes "vmread_error"
KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
KVM: VMX: Add a trampoline to fix VMREAD error handling
KVM: SVM: Annotate svm_x86_ops as __initdata
KVM: VMX: Annotate vmx_x86_ops as __initdata
KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
KVM: VMX: Configure runtime hooks using vmx_x86_ops
KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
KVM: x86: Move init-only kvm_x86_ops to separate struct
KVM: Pass kvm_init()'s opaque param to additional arch funcs
s390/gmap: return proper error code on ksm unsharing
KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
KVM: Fix out of range accesses to memslots
KVM: X86: Micro-optimize IPI fastpath delay
KVM: X86: Delay read msr data iff writes ICR MSR
KVM: PPC: Book3S HV: Add a capability for enabling secure guests
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
...
Merge updates from Andrew Morton:
"A large amount of MM, plenty more to come.
Subsystems affected by this patch series:
- tools
- kthread
- kbuild
- scripts
- ocfs2
- vfs
- mm: slub, kmemleak, pagecache, gup, swap, memcg, pagemap, mremap,
sparsemem, kasan, pagealloc, vmscan, compaction, mempolicy,
hugetlbfs, hugetlb"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits)
include/linux/huge_mm.h: check PageTail in hpage_nr_pages even when !THP
mm/hugetlb: fix build failure with HUGETLB_PAGE but not HUGEBTLBFS
selftests/vm: fix map_hugetlb length used for testing read and write
mm/hugetlb: remove unnecessary memory fetch in PageHeadHuge()
mm/hugetlb.c: clean code by removing unnecessary initialization
hugetlb_cgroup: add hugetlb_cgroup reservation docs
hugetlb_cgroup: add hugetlb_cgroup reservation tests
hugetlb: support file_region coalescing again
hugetlb_cgroup: support noreserve mappings
hugetlb_cgroup: add accounting for shared mappings
hugetlb: disable region_add file_region coalescing
hugetlb_cgroup: add reservation accounting for private mappings
mm/hugetlb_cgroup: fix hugetlb_cgroup migration
hugetlb_cgroup: add interface for charge/uncharge hugetlb reservations
hugetlb_cgroup: add hugetlb_cgroup reservation counter
hugetlbfs: Use i_mmap_rwsem to address page fault/truncate race
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
mm/memblock.c: remove redundant assignment to variable max_addr
mm: mempolicy: require at least one nodeid for MPOL_PREFERRED
mm: mempolicy: use VM_BUG_ON_VMA in queue_pages_test_walk()
...
Pull exec/proc updates from Eric Biederman:
"This contains two significant pieces of work: the work to sort out
proc_flush_task, and the work to solve a deadlock between strace and
exec.
Fixing proc_flush_task so that it no longer requires a persistent
mount makes improvements to proc possible. The removal of the
persistent mount solves an old regression that that caused the hidepid
mount option to only work on remount not on mount. The regression was
found and reported by the Android folks. This further allows Alexey
Gladkov's work making proc mount options specific to an individual
mount of proc to move forward.
The work on exec starts solving a long standing issue with exec that
it takes mutexes of blocking userspace applications, which makes exec
extremely deadlock prone. For the moment this adds a second mutex with
a narrower scope that handles all of the easy cases. Which makes the
tricky cases easy to spot. With a little luck the code to solve those
deadlocks will be ready by next merge window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (25 commits)
signal: Extend exec_id to 64bits
pidfd: Use new infrastructure to fix deadlocks in execve
perf: Use new infrastructure to fix deadlocks in execve
proc: io_accounting: Use new infrastructure to fix deadlocks in execve
proc: Use new infrastructure to fix deadlocks in execve
kernel/kcmp.c: Use new infrastructure to fix deadlocks in execve
kernel: doc: remove outdated comment cred.c
mm: docs: Fix a comment in process_vm_rw_core
selftests/ptrace: add test cases for dead-locks
exec: Fix a deadlock in strace
exec: Add exec_update_mutex to replace cred_guard_mutex
exec: Move exec_mmap right after de_thread in flush_old_exec
exec: Move cleanup of posix timers on exec out of de_thread
exec: Factor unshare_sighand out of de_thread and call it separately
exec: Only compute current once in flush_old_exec
pid: Improve the comment about waiting in zap_pid_ns_processes
proc: Remove the now unnecessary internal mount of proc
uml: Create a private mount of proc for mconsole
uml: Don't consult current to find the proc_mnt in mconsole_proc
proc: Use a list of inodes to flush from proc
...
Add a new command line option 'e' to invoke "PCITEST_CLEAR_IRQ"
ioctl. This can be used to clear the irqs set using the 'i' option.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Add a new command line option 'd' to use DMA for data transfers.
It should be used with read, write or copy commands.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Alan Mikhak <alan.mikhak@sifive.com>
Commit fa7b9a805c ("tools/selftest/vm: allow choosing mem size and page
size in map_hugetlb") added the possibility to change the size of memory
mapped for the test, but left the read and write test using the default
value. This is unnoticed when mapping a length greater than the default
one, but segfaults otherwise.
Fix read_bytes() and write_bytes() by giving them the real length.
Also fix the call to munmap().
Fixes: fa7b9a805c ("tools/selftest/vm: allow choosing mem size and page size in map_hugetlb")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/9a404a13c871c4bd0ba9ede68f69a1225180dd7e.1580978385.git.christophe.leroy@c-s.fr
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The tests use both shared and private mapped hugetlb memory, and monitors
the hugetlb usage counter as well as the hugetlb reservation counter.
They test different configurations such as hugetlb memory usage via
hugetlbfs, or MAP_HUGETLB, or shmget/shmat, and with and without
MAP_POPULATE.
Also add test for hugetlb reservation reparenting, since this is a subtle
issue.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Sandipan Das <sandipan@linux.ibm.com> [powerpc64]
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200211213128.73302-8-almasrymina@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It was noticed that mlock2 tests are failing after 9c4e6b1a70 ("mm,
mlock, vmscan: no more skipping pagevecs") because the patch has changed
the timing on when the page is added to the unevictable LRU list and thus
gains the unevictable page flag.
The test was just too dependent on the implementation details which were
true at the time when it was introduced. Page flags and the timing when
they are set is something no userspace should ever depend on. The test
should be testing only for the user observable contract of the tested
syscalls. Those are defined pretty well for the mlock and there are other
means for testing them. In fact this is already done and testing for page
flags can be safely dropped to achieve the aimed purpose. Present bits
can be checked by /proc/<pid>/smaps RSS field and the locking state by
VmFlags although I would argue that Locked: field would be more
appropriate.
Drop all the page flag machinery and considerably simplify the test. This
should be more robust for future kernel changes while checking the
promised contract is still valid.
Fixes: 9c4e6b1a70 ("mm, mlock, vmscan: no more skipping pagevecs")
Reported-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Eric B Munson <emunson@akamai.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200324154218.GS19542@dhcp22.suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's good to have basic unit test coverage of the new FOLL_PIN behavior.
Fortunately, the gup_benchmark unit test is extremely fast (a few
milliseconds), so adding it the the run_vmtests suite is going to cause no
noticeable change in running time.
So, add two new invocations to run_vmtests:
1) Run gup_benchmark with normal get_user_pages().
2) Run gup_benchmark with pin_user_pages(). This is much like the
first call, except that it sets FOLL_PIN.
Running these two in quick succession also provide a visual comparison of
the running times, which is convenient.
The new invocations are fairly early in the run_vmtests script, because
with test suites, it's usually preferable to put the shorter, faster tests
first, all other things being equal.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-11-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Up until now, gup_benchmark supported testing of the following kernel
functions:
* get_user_pages(): via the '-U' command line option
* get_user_pages_longterm(): via the '-L' command line option
* get_user_pages_fast(): as the default (no options required)
Add test coverage for the new corresponding pin_*() functions:
* pin_user_pages_fast(): via the '-a' command line option
* pin_user_pages(): via the '-b' command line option
Also, add an option for clarity: '-u' for what is now (still) the default
choice: get_user_pages_fast().
Also, for the commands that set FOLL_PIN, verify that the pages really are
dma-pinned, via the new is_dma_pinned() routine. Those commands are:
PIN_FAST_BENCHMARK : calls pin_user_pages_fast()
PIN_BENCHMARK : calls pin_user_pages()
In between the calls to pin_*() and unpin_user_pages(), check each page:
if page_maybe_dma_pinned() returns false, then WARN and return.
Do this outside of the benchmark timestamps, so that it doesn't affect
reported times.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-10-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A recent change to the netlink code: 6e237d099f ("netlink: Relax attr
validation for fixed length types") logs a warning when programs send
messages with invalid attributes (e.g., wrong length for a u32). Yafang
reported this error message for tools/accounting/getdelays.c.
send_cmd() is wrongly adding 1 to the attribute length. As noted in
include/uapi/linux/netlink.h nla_len should be NLA_HDRLEN + payload
length, so drop the +1.
Fixes: 9e06d3f9f6 ("per task delay accounting taskstats interface: documentation fix")
Reported-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200327173111.63922-1-dsahern@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To get the changes in:
6546b19f95 ("perf/core: Add PERF_SAMPLE_CGROUP feature")
96aaab6865 ("perf/core: Add PERF_RECORD_CGROUP event")
This silences this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
This update is a prerequisite to adding support for the HW index of raw
branch records.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: http://lore.kernel.org/lkml/20200325124536.2800725-4-namhyung@kernel.org
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ahci driver doesn't support error recovery, and if your root
filesystem is attached to it the eeh-basic.sh test will likely kill
your machine.
So skip any device we see using the ahci driver.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200326061144.2006522-1-mpe@ellerman.id.au
- Fix two bugs which affected multi-index entries larger than 2^26 indices
- Fix some documentation
- Remove unused IDA macros
- Add a small optimisation for tiny configurations
- Fix a bug which could cause an RCU walker to terminate a marked walk early
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAl6DT1YACgkQDpNsjXcp
gj4GqAf/fVxinQwhlxF2UGVho67JgXpQklHtJi7uLUbdxEqueU1miz9W5rLfRUs5
JP8+7ahwkV4lfphzf8FhfGkQmc3aWFsPLjpicnH1y0Mei0C24mYZgAO0ZA+S1o+5
HZJ82jb8QtAHrhlnHZcwC20Q0bq5Q/HWVMfdv9YmZlBV0U4E/lUaZtpSc1T0Hcjt
7faT8QWeudEwraklp0lRq2AFVJainbH4Xcyr7EHMcZySRfk7p6bgLlQ6QbHbjcsh
IdtbbR/xOkC9eLX5WtDSzVg1q5AS3l0Fegu14A+/OuyXnsJYe1vF43jw9xId/V2u
Wn+GRbeBxV3flQWK+8PoVvlQCsY4fw==
=O2iY
-----END PGP SIGNATURE-----
Merge tag 'xarray-5.7' of git://git.infradead.org/users/willy/linux-dax
Pull XArray updates from Matthew Wilcox:
- Fix two bugs which affected multi-index entries larger than 2^26
indices
- Fix some documentation
- Remove unused IDA macros
- Add a small optimisation for tiny configurations
- Fix a bug which could cause an RCU walker to terminate a marked walk
early
* tag 'xarray-5.7' of git://git.infradead.org/users/willy/linux-dax:
xarray: Fix early termination of xas_for_each_marked
radix tree test suite: Support kmem_cache alignment
XArray: Optimise xas_sibling() if !CONFIG_XARRAY_MULTI
ida: remove abandoned macros
XArray: Fix incorrect comment in header file
XArray: Fix xas_pause for large multi-index entries
XArray: Fix xa_find_next for large multi-index entries
This kunit update for Linux-5.7-rc1 consists of:
- debugfs support for displaying kunit test suite results; this is
especially useful for module-loaded tests to allow disentangling of
test result display from other dmesg events. CONFIG_KUNIT_DEBUGFS
enables/disables the debugfs support.
- Several fixes and improvements to kunit framework and tool.
-----BEGIN PGP SIGNATURE-----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=5w9O
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
"This kunit update consists of:
- debugfs support for displaying kunit test suite results.
This is especially useful for module-loaded tests to allow
disentangling of test result display from other dmesg events.
CONFIG_KUNIT_DEBUGFS enables/disables the debugfs support.
- Several fixes and improvements to kunit framework and tool"
* tag 'linux-kselftest-kunit-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: add missing test data file content
kunit: update documentation to describe debugfs representation
kunit: subtests should be indented 4 spaces according to TAP
kunit: add log test
kunit: add debugfs /sys/kernel/debug/kunit/<suite>/results display
Documentation: kunit: Make the KUnit documentation less UML-specific
Fix linked-list KUnit test when run multiple times
kunit: kunit_tool: Allow .kunitconfig to disable config items
kunit: Always print actual pointer values in asserts
kunit: add --make_options
kunit: Run all KUnit tests through allyesconfig
kunit: kunit_parser: make parser more robust
This kselftest update Linux 5.7-rc1 consists of:
- resctrl_tests for resctrl file system. resctrl isn't included in the
default TARGETS list in kselftest Makefile. It can be run manually.
- Kselftest harness improvements.
- Kselftest framework and individual test fixes to support runs on
Kernel CI rings and other environments that use relocatable build
and install features.
- Minor cleanups and typo fixes.
-----BEGIN PGP SIGNATURE-----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=FsXI
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
"This kselftest update consists of:
- resctrl_tests for resctrl file system. resctrl isn't included in
the default TARGETS list in kselftest Makefile. It can be run
manually.
- Kselftest harness improvements.
- Kselftest framework and individual test fixes to support runs on
Kernel CI rings and other environments that use relocatable build
and install features.
- Minor cleanups and typo fixes"
* tag 'linux-kselftest-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
selftests: enforce local header dependency in lib.mk
selftests: Fix memfd to support relocatable build (O=objdir)
selftests: Fix seccomp to support relocatable build (O=objdir)
selftests/harness: Handle timeouts cleanly
selftests/harness: Move test child waiting logic
selftests: android: Fix custom install from skipping test progs
selftests: android: ion: Fix ionmap_test compile error
selftests: Fix kselftest O=objdir build from cluttering top level objdir
selftests/seccomp: Adjust test fixture counts
selftests/ftrace: Fix typo in trigger-multihist.tc
selftests/timens: Remove duplicated include <time.h>
selftests/resctrl: fix spelling mistake "Errror" -> "Error"
selftests/resctrl: Add the test in MAINTAINERS
selftests/resctrl: Disable MBA and MBM tests for AMD
selftests/resctrl: Use cache index3 id for AMD schemata masks
selftests/resctrl: Add vendor detection mechanism
selftests/resctrl: Add Cache Allocation Technology (CAT) selftest
selftests/resctrl: Add Cache QoS Monitoring (CQM) selftest
selftests/resctrl: Add MBA test
selftests/resctrl: Add MBM test
...
We added a usage of try-run to pmu/ebb/Makefile to detect if the
toolchain supported the -no-pie option.
This fails if we build out-of-tree and the source tree is not
writable, as try-run tries to write its temporary files to the current
directory. That leads to the -no-pie option being silently dropped,
which leads to broken executables with some toolchains.
If we remove the redirect to /dev/null in try-run, we see the error:
make[3]: Entering directory '/linux/tools/testing/selftests/powerpc/pmu/ebb'
/usr/bin/ld: cannot open output file .54.tmp: Read-only file system
collect2: error: ld returned 1 exit status
make[3]: Nothing to be done for 'all'.
And looking with strace we see it's trying to use a file that's in the
source tree:
lstat("/linux/tools/testing/selftests/powerpc/pmu/ebb/.54.tmp", 0x7ffffc0f83c8)
We can fix it by setting TMPOUT to point to the $(OUTPUT) directory,
and we can verify with strace it's now trying to write to the output
directory:
lstat("/output/kselftest/powerpc/pmu/ebb/.54.tmp", 0x7fffd1bf6bf8)
And also see that the -no-pie option is now correctly detected.
Fixes: 0695f8bca9 ("selftests/powerpc: Handle Makefile for unrecognized option")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200327095319.2347641-1-mpe@ellerman.id.au
Pull networking updates from David Miller:
"Highlights:
1) Fix the iwlwifi regression, from Johannes Berg.
2) Support BSS coloring and 802.11 encapsulation offloading in
hardware, from John Crispin.
3) Fix some potential Spectre issues in qtnfmac, from Sergey
Matyukevich.
4) Add TTL decrement action to openvswitch, from Matteo Croce.
5) Allow paralleization through flow_action setup by not taking the
RTNL mutex, from Vlad Buslov.
6) A lot of zero-length array to flexible-array conversions, from
Gustavo A. R. Silva.
7) Align XDP statistics names across several drivers for consistency,
from Lorenzo Bianconi.
8) Add various pieces of infrastructure for offloading conntrack, and
make use of it in mlx5 driver, from Paul Blakey.
9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.
10) Lots of parallelization improvements during configuration changes
in mlxsw driver, from Ido Schimmel.
11) Add support to devlink for generic packet traps, which report
packets dropped during ACL processing. And use them in mlxsw
driver. From Jiri Pirko.
12) Support bcmgenet on ACPI, from Jeremy Linton.
13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
Starovoitov, and your's truly.
14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.
15) Fix sysfs permissions when network devices change namespaces, from
Christian Brauner.
16) Add a flags element to ethtool_ops so that drivers can more simply
indicate which coalescing parameters they actually support, and
therefore the generic layer can validate the user's ethtool
request. Use this in all drivers, from Jakub Kicinski.
17) Offload FIFO qdisc in mlxsw, from Petr Machata.
18) Support UDP sockets in sockmap, from Lorenz Bauer.
19) Fix stretch ACK bugs in several TCP congestion control modules,
from Pengcheng Yang.
20) Support virtual functiosn in octeontx2 driver, from Tomasz
Duszynski.
21) Add region operations for devlink and use it in ice driver to dump
NVM contents, from Jacob Keller.
22) Add support for hw offload of MACSEC, from Antoine Tenart.
23) Add support for BPF programs that can be attached to LSM hooks,
from KP Singh.
24) Support for multiple paths, path managers, and counters in MPTCP.
From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
and others.
25) More progress on adding the netlink interface to ethtool, from
Michal Kubecek"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
cxgb4/chcr: nic-tls stats in ethtool
net: dsa: fix oops while probing Marvell DSA switches
net/bpfilter: remove superfluous testing message
net: macb: Fix handling of fixed-link node
net: dsa: ksz: Select KSZ protocol tag
netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
net: stmmac: create dwmac-intel.c to contain all Intel platform
net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
net: dsa: bcm_sf2: Add support for matching VLAN TCI
net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
net: dsa: bcm_sf2: Disable learning for ASP port
net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
net: dsa: b53: Restore VLAN entries upon (re)configuration
net: dsa: bcm_sf2: Fix overflow checks
hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
...
* Fix for improper handling of fan_boost_mode in sysfs for ASUS laptops.
* On newer ASUS laptops the 1st battery is named differently, here is a fix.
* Fix Lex 2I385SW to allow both network cards to be used.
* The power integrated circuit driver for Surface 3 has been added.
* Refactor and clean up of Intel PMC driver and enable it on Intel Jasper Lake.
* Clean up of Dell RBU driver.
* Big update for Intel Speed Select technology support tool and driver.
The following is an automated git shortlog grouped by driver:
asus-wmi:
- Support laptops where the first battery is named BATT
- Fix return value of fan_boost_mode_store
dell_rbu:
- Unify format of the printed messages
- Use max_t() to get rid of casting
- Simplify cleanup code in create_packet()
- don't open code list_for_each_entry*()
- Use sysfs_create_group() API
GPD pocket fan:
- Fix error message when temp-limits are out of range
i2c-multi-instantiate:
- Replace zero-length array with flexible-array member
intel-hid:
- Move MODULE_DEVICE_TABLE() closer to the table
intel_pmc_core:
- Make pmc_core_substate_res_show() generic
- Make pmc_core_lpm_display() generic for platforms that support sub-states
- Add slp_s0_offset attribute back to tgl_reg_map
- Remove duplicate 'if' to create debugfs entry
- Relocate pmc_core_*_display() to outside of CONFIG_DEBUG_FS
- Add debugfs support to access live status registers
- Dump low power status registers on an S0ix.y failure
- Add an additional parameter to pmc_core_lpm_display()
- Remove slp_s0 attributes from tgl_reg_map
- Refactor the driver by removing redundant code
- Add debugfs entry for low power mode status registers
- Add debugfs entry to access sub-state residencies
- Add Atom based Jasper Lake (JSL) platform support
intel-vbtn:
- Move MODULE_DEVICE_TABLE() closer to the table
ISST:
- Fix wrong unregister type
PDx86:
- Kconfig: Fix a typo
- Kconfig: Group modules by companies and functions
- MAINTAINERS: Sort entries in database for PDx86
- Makefile: Group modules by companies and functions
platform/x86/intel-uncore-freq:
- Add release callback
- Fix static checker issue and potential race condition
pmc_atom:
- Add Lex 2I385SW to critclk_systems DMI table
sony-laptop:
- Use scnprintf() for avoiding potential buffer overflow
surface3_power:
- Fix always true condition in mshw0011_space_handler()
- Fix Kconfig section ordering
- Add missed headers
- Reformat GUID assignment
- Drop useless macro ACPI_PTR()
- Prefix POLL_INTERVAL with SURFACE_3
- Simplify mshw0011_adp_psr() to one liner
- Use dev_err() instead of pr_err()
- Drop unused structure definition
- MSHW0011 rev-eng implementation
tools/power/x86/intel-speed-select:
- Fix a typo in error message
- Update version
- Avoid duplicate Package strings for json
- Add display for enabled cpus count
- Print friendly warning for bad command line
- Fix avx options for turbo-freq feature
- Improve CLX commands
- Show error for invalid CPUs in the options
- Improve core-power result and error display
- Kernel interface error handling
- Improve error display for turbo-freq feature
- Improve error display for base-freq feature
- Improve output of perf-profile commands
- Enhance help for core-power assoc
- Display error for invalid priority type
- Check feature status first
- Improve error display for perf-profile feature
- Add an API for error/information print
- Enhance --info option
- Enhance help
- Helpful warning for missing kernel interface
- Store topology information
- Max CPU count calculation when CPU0 is offline
- Special handling for CPU 0 online/offline
- Use more verbiage for clos information
- Enhance core-power info command
- Make target CPU optional for core-power info
- Warn for invalid package id
- Fix last cpu number
- Fix mailbox usage for CLOS_PM_QOS_CONFIG
- Avoid duplicate names for json parsing
- Fix display for turbo-freq auto mode
-----BEGIN PGP SIGNATURE-----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=G0jF
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.7-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- Fix for improper handling of fan_boost_mode in sysfs for ASUS
laptops.
- On newer ASUS laptops the 1st battery is named differently, here is a
fix.
- Fix Lex 2I385SW to allow both network cards to be used.
- The power integrated circuit driver for Surface 3 has been added.
- Refactor and clean up of Intel PMC driver and enable it on Intel
Jasper Lake.
- Clean up of Dell RBU driver.
- Big update for Intel Speed Select technology support tool and driver.
* tag 'platform-drivers-x86-v5.7-1' of git://git.infradead.org/linux-platform-drivers-x86: (75 commits)
platform/x86: surface3_power: Fix always true condition in mshw0011_space_handler()
platform/x86: surface3_power: Fix Kconfig section ordering
platform/x86: surface3_power: Add missed headers
platform/x86: surface3_power: Reformat GUID assignment
platform/x86: surface3_power: Drop useless macro ACPI_PTR()
platform/x86: surface3_power: Prefix POLL_INTERVAL with SURFACE_3
platform/x86: surface3_power: Simplify mshw0011_adp_psr() to one liner
platform/x86: surface3_power: Use dev_err() instead of pr_err()
platform/x86: surface3_power: Drop unused structure definition
platform/x86: surface3_power: MSHW0011 rev-eng implementation
platform/x86: intel_pmc_core: Make pmc_core_substate_res_show() generic
platform/x86: intel_pmc_core: Make pmc_core_lpm_display() generic for platforms that support sub-states
tools/power/x86/intel-speed-select: Fix a typo in error message
tools/power/x86/intel-speed-select: Update version
tools/power/x86/intel-speed-select: Avoid duplicate Package strings for json
tools/power/x86/intel-speed-select: Add display for enabled cpus count
tools/power/x86/intel-speed-select: Print friendly warning for bad command line
tools/power/x86/intel-speed-select: Fix avx options for turbo-freq feature
tools/power/x86/intel-speed-select: Improve CLX commands
tools/power/x86/intel-speed-select: Show error for invalid CPUs in the options
...
Out of tree build using
make M=tools/test/nvdimm O=/tmp/build -C /tmp/build
fails with the following error
make: Entering directory '/tmp/build'
CC [M] tools/testing/nvdimm/test/nfit.o
linux/tools/testing/nvdimm/test/nfit.c:19:10: fatal error: nd-core.h: No such file or directory
19 | #include <nd-core.h>
| ^~~~~~~~~~~
compilation terminated.
That is because the kbuild file uses $(src) which points to
tools/testing/nvdimm, $(srctree) correctly points to root of the linux
source tree.
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Link: https://lore.kernel.org/r/20200114054051.4115790-1-santosh@fossix.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull misc x86 updates from Ingo Molnar:
- extend the decoder maps with CET instructions
- fix !vDSO corner cases
* 'x86-misc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/tests: Add CET instructions to the new instructions test
x86/insn: Add Control-flow Enforcement (CET) instructions to the opcode map
selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault
selftests/x86/vdso: Fix no-vDSO segfaults
- Convert the 32bit syscalls to be pt_regs based which removes the
requirement to push all 6 potential arguments onto the stack and
consolidates the interface with the 64bit variant
- The first small portion of the exception and syscall related entry
code consolidation which aims to address the recently discovered
issues vs. RCU, int3, NMI and some other exceptions which can
interrupt any context. The bulk of the changes is still work in
progress and aimed for 5.8.
- A few lockdep namespace cleanups which have been applied into this
branch to keep the prerequisites for the ongoing work confined.
-----BEGIN PGP SIGNATURE-----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=tWXS
-----END PGP SIGNATURE-----
Merge tag 'x86-entry-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry code updates from Thomas Gleixner:
- Convert the 32bit syscalls to be pt_regs based which removes the
requirement to push all 6 potential arguments onto the stack and
consolidates the interface with the 64bit variant
- The first small portion of the exception and syscall related entry
code consolidation which aims to address the recently discovered
issues vs. RCU, int3, NMI and some other exceptions which can
interrupt any context. The bulk of the changes is still work in
progress and aimed for 5.8.
- A few lockdep namespace cleanups which have been applied into this
branch to keep the prerequisites for the ongoing work confined.
* tag 'x86-entry-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
x86/entry: Fix build error x86 with !CONFIG_POSIX_TIMERS
lockdep: Rename trace_{hard,soft}{irq_context,irqs_enabled}()
lockdep: Rename trace_softirqs_{on,off}()
lockdep: Rename trace_hardirq_{enter,exit}()
x86/entry: Rename ___preempt_schedule
x86: Remove unneeded includes
x86/entry: Drop asmlinkage from syscalls
x86/entry/32: Enable pt_regs based syscalls
x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments
x86/entry/32: Rename 32-bit specific syscalls
x86/entry/32: Clean up syscall_32.tbl
x86/entry: Remove ABI prefixes from functions in syscall tables
x86/entry/64: Add __SYSCALL_COMMON()
x86/entry: Remove syscall qualifier support
x86/entry/64: Remove ptregs qualifier from syscall table
x86/entry: Move max syscall number calculation to syscallhdr.sh
x86/entry/64: Split X32 syscall table into its own file
x86/entry/64: Move sys_ni_syscall stub to common.c
x86/entry/64: Use syscall wrappers for x32_rt_sigreturn
x86/entry: Refactor SYS_NI macros
...
Add test cases that verify that each registered packet trap policer:
* Honors that imposed limitations of rate and burst size
* Able to police trapped packets to the specified rate
* Able to police trapped packets to the specified burst size
* Able to be unbound from its trap group
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test cases for packet trap policer set / show commands as well as
for the binding of these policers to packet trap groups.
Both good and bad flows are tested for maximum coverage.
v2:
* Add test case with new 'fail_trap_policer_set' knob
* Add test case for partially modified trap group
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add selftests to exercise FD-based cgroup BPF program attachments and their
intermixing with legacy cgroup BPF attachments. Auto-detachment and program
replacement (both unconditional and cmpxchng-like) are tested as well.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200330030001.2312810-5-andriin@fb.com
Add bpf_program__attach_cgroup(), which uses BPF_LINK_CREATE subcommand to
create an FD-based kernel bpf_link. Also add low-level bpf_link_create() API.
If expected_attach_type is not specified explicitly with
bpf_program__set_expected_attach_type(), libbpf will try to determine proper
attach type from BPF program's section definition.
Also add support for bpf_link's underlying BPF program replacement:
- unconditional through high-level bpf_link__update_program() API;
- cmpxchg-like with specifying expected current BPF program through
low-level bpf_link_update() API.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200330030001.2312810-4-andriin@fb.com
Implement new sub-command to attach cgroup BPF programs and return FD-based
bpf_link back on success. bpf_link, once attached to cgroup, cannot be
replaced, except by owner having its FD. Cgroup bpf_link supports only
BPF_F_ALLOW_MULTI semantics. Both link-based and prog-based BPF_F_ALLOW_MULTI
attachments can be freely intermixed.
To prevent bpf_cgroup_link from keeping cgroup alive past the point when no
BPF program can be executed, implement auto-detachment of link. When
cgroup_bpf_release() is called, all attached bpf_links are forced to release
cgroup refcounts, but they leave bpf_link otherwise active and allocated, as
well as still owning underlying bpf_prog. This is because user-space might
still have FDs open and active, so bpf_link as a user-referenced object can't
be freed yet. Once last active FD is closed, bpf_link will be freed and
underlying bpf_prog refcount will be dropped. But cgroup refcount won't be
touched, because cgroup is released already.
The inherent race between bpf_cgroup_link release (from closing last FD) and
cgroup_bpf_release() is resolved by both operations taking cgroup_mutex. So
the only additional check required is when bpf_cgroup_link attempts to detach
itself from cgroup. At that time we need to check whether there is still
cgroup associated with that link. And if not, exit with success, because
bpf_cgroup_link was already successfully detached.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Link: https://lore.kernel.org/bpf/20200330030001.2312810-2-andriin@fb.com
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- A couple of x86/cpu cleanups and changes were grandfathered in due
to patch dependencies. These clean up the set of CPU model/family
matching macros with a consistent namespace and C99 initializer
style.
- A bunch of updates to various low level PMU drivers:
* AMD Family 19h L3 uncore PMU
* Intel Tiger Lake uncore support
* misc fixes to LBR TOS sampling
- optprobe fixes
- perf/cgroup: optimize cgroup event sched-in processing
- misc cleanups and fixes
Tooling side changes are to:
- perf {annotate,expr,record,report,stat,test}
- perl scripting
- libapi, libperf and libtraceevent
- vendor events on Intel and S390, ARM cs-etm
- Intel PT updates
- Documentation changes and updates to core facilities
- misc cleanups, fixes and other enhancements"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits)
cpufreq/intel_pstate: Fix wrong macro conversion
x86/cpu: Cleanup the now unused CPU match macros
hwrng: via_rng: Convert to new X86 CPU match macros
crypto: Convert to new CPU match macros
ASoC: Intel: Convert to new X86 CPU match macros
powercap/intel_rapl: Convert to new X86 CPU match macros
PCI: intel-mid: Convert to new X86 CPU match macros
mmc: sdhci-acpi: Convert to new X86 CPU match macros
intel_idle: Convert to new X86 CPU match macros
extcon: axp288: Convert to new X86 CPU match macros
thermal: Convert to new X86 CPU match macros
hwmon: Convert to new X86 CPU match macros
platform/x86: Convert to new CPU match macros
EDAC: Convert to new X86 CPU match macros
cpufreq: Convert to new X86 CPU match macros
ACPI: Convert to new X86 CPU match macros
x86/platform: Convert to new CPU match macros
x86/kernel: Convert to new CPU match macros
x86/kvm: Convert to new CPU match macros
x86/perf/events: Convert to new CPU match macros
...
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- Continued user-access cleanups in the futex code.
- percpu-rwsem rewrite that uses its own waitqueue and atomic_t
instead of an embedded rwsem. This addresses a couple of
weaknesses, but the primary motivation was complications on the -rt
kernel.
- Introduce raw lock nesting detection on lockdep
(CONFIG_PROVE_RAW_LOCK_NESTING=y), document the raw_lock vs. normal
lock differences. This too originates from -rt.
- Reuse lockdep zapped chain_hlocks entries, to conserve RAM
footprint on distro-ish kernels running into the "BUG:
MAX_LOCKDEP_CHAIN_HLOCKS too low!" depletion of the lockdep
chain-entries pool.
- Misc cleanups, smaller fixes and enhancements - see the changelog
for details"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_t
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
Documentation/locking/locktypes: Minor copy editor fixes
Documentation/locking/locktypes: Further clarifications and wordsmithing
m68knommu: Remove mm.h include from uaccess_no.h
x86: get rid of user_atomic_cmpxchg_inatomic()
generic arch_futex_atomic_op_inuser() doesn't need access_ok()
x86: don't reload after cmpxchg in unsafe_atomic_op2() loop
x86: convert arch_futex_atomic_op_inuser() to user_access_begin/user_access_end()
objtool: whitelist __sanitizer_cov_trace_switch()
[parisc, s390, sparc64] no need for access_ok() in futex handling
sh: no need of access_ok() in arch_futex_atomic_op_inuser()
futex: arch_futex_atomic_op_inuser() calling conventions change
completion: Use lockdep_assert_RT_in_threaded_ctx() in complete_all()
lockdep: Add posixtimer context tracing bits
lockdep: Annotate irq_work
lockdep: Add hrtimer context tracing bits
lockdep: Introduce wait-type checks
completion: Use simple wait queues
sched/swait: Prepare usage in completions
...
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle were:
- Make kfree_rcu() use kfree_bulk() for added performance
- RCU updates
- Callback-overload handling updates
- Tasks-RCU KCSAN and sparse updates
- Locking torture test and RCU torture test updates
- Documentation updates
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits)
rcu: Make rcu_barrier() account for offline no-CBs CPUs
rcu: Mark rcu_state.gp_seq to detect concurrent writes
Documentation/memory-barriers: Fix typos
doc: Add rcutorture scripting to torture.txt
doc/RCU/rcu: Use https instead of http if possible
doc/RCU/rcu: Use absolute paths for non-rst files
doc/RCU/rcu: Use ':ref:' for links to other docs
doc/RCU/listRCU: Update example function name
doc/RCU/listRCU: Fix typos in a example code snippets
doc/RCU/Design: Remove remaining HTML tags in ReST files
doc: Add some more RCU list patterns in the kernel
rcutorture: Set KCSAN Kconfig options to detect more data races
rcutorture: Manually clean up after rcu_barrier() failure
rcutorture: Make rcu_torture_barrier_cbs() post from corresponding CPU
rcuperf: Measure memory footprint during kfree_rcu() test
rcutorture: Annotation lockless accesses to rcu_torture_current
rcutorture: Add READ_ONCE() to rcu_torture_count and rcu_torture_batch
rcutorture: Fix stray access to rcu_fwd_cb_nodelay
rcutorture: Fix rcu_torture_one_read()/rcu_torture_writer() data race
rcutorture: Make kvm-find-errors.sh abort on bad directory
...
Pull objtool updates from Ingo Molnar:
"The biggest changes in this cycle were the vmlinux.o optimizations by
Peter Zijlstra, which are preparatory and optimization work to run
objtool against the much richer vmlinux.o object file, to perform
new, whole-program section based logic. That work exposed a handful
of problems with the existing code, which fixes and optimizations are
merged here. The complete 'vmlinux.o and noinstr' work is still work
in progress, targeted for v5.8.
There's also assorted fixes and enhancements from Josh Poimboeuf.
In particular I'd like to draw attention to commit 644592d328,
which turns fatal objtool errors into failed kernel builds. This
behavior is IMO now justified on multiple grounds (it's easy currently
to not notice an essentially corrupted kernel build), and the commit
has been in -next testing for several weeks, but there could still be
build failures with old or weird toolchains. Should that be widespread
or high profile enough then I'd suggest a quick revert, to not hold up
the merge window"
* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
objtool: Re-arrange validate_functions()
objtool: Optimize find_rela_by_dest_range()
objtool: Delete cleanup()
objtool: Optimize read_sections()
objtool: Optimize find_symbol_by_name()
objtool: Resize insn_hash
objtool: Rename find_containing_func()
objtool: Optimize find_symbol_*() and read_symbols()
objtool: Optimize find_section_by_name()
objtool: Optimize find_section_by_index()
objtool: Add a statistics mode
objtool: Optimize find_symbol_by_index()
x86/kexec: Make relocate_kernel_64.S objtool clean
x86/kexec: Use RIP relative addressing
objtool: Rename func_for_each_insn_all()
objtool: Rename func_for_each_insn()
objtool: Introduce validate_return()
objtool: Improve call destination function detection
objtool: Fix clang switch table edge case
objtool: Add relocation check for alternative sections
...
- Clean up and rework the PM QoS API to simplify the code and
reduce the size of it (Rafael Wysocki).
- Fix a suspend-to-idle wakeup regression on Dell XPS13 9370
and similar platforms where the USB plug/unplug events are
handled by the EC (Rafael Wysocki).
- CLean up the intel_idle and PSCI cpuidle drivers (Rafael Wysocki,
Ulf Hansson).
- Extend the haltpoll cpuidle driver so that it can be forced to
run on some systems where it refused to load (Maciej Szmigiero).
- Convert several cpufreq documents to the .rst format and move the
legacy driver documentation into one common file (Mauro Carvalho
Chehab, Rafael Wysocki).
- Update several cpufreq drivers:
* Extend and fix the imx-cpufreq-dt driver (Anson Huang).
* Improve the -EPROBE_DEFER handling and fix unwanted CPU
overclocking on i.MX6ULL in imx6q-cpufreq (Anson Huang,
Christoph Niedermaier).
* Add support for Krait based SoCs to the qcom driver (Ansuel
Smith).
* Add support for OPP_PLUS to ti-cpufreq (Lokesh Vutla).
* Add platform specific intermediate callbacks support to
cpufreq-dt and update the imx6q driver (Peng Fan).
* Simplify and consolidate some pieces of the intel_pstate driver
and update its documentation (Rafael Wysocki, Alex Hung).
- Fix several devfreq issues:
* Remove unneeded extern keyword from a devfreq header file
and use the DEVFREQ_GOV_UPDATE_INTERNAL event name instead of
DEVFREQ_GOV_INTERNAL (Chanwoo Choi).
* Fix the handling of dev_pm_qos_remove_request() result (Leonard
Crestez).
* Use constant name for userspace governor (Pierre Kuo).
* Get rid of doc warnings and fix a typo (Christophe JAILLET).
- Use built-in RCU list checking in some places in the PM core to
avoid false-positive RCU usage warnings (Madhuparna Bhowmik).
- Add explicit READ_ONCE()/WRITE_ONCE() annotations to low-level
PM QoS routines (Qian Cai).
- Fix removal of wakeup sources to avoid NULL pointer dereferences
in a corner case (Neeraj Upadhyay).
- Clean up the handling of hibernate compat ioctls and fix the
related documentation (Eric Biggers).
- Update the idle_inject power capping driver to use variable-length
arrays instead of zero-length arrays (Gustavo Silva).
- Fix list format in a PM QoS document (Randy Dunlap).
- Make the cpufreq stats module use scnprintf() to avoid potential
buffer overflows (Takashi Iwai).
- Add pm_runtime_get_if_active() to PM-runtime API (Sakari Ailus).
- Allow no domain-idle-states DT property in generic PM domains (Ulf
Hansson).
- Fix a broken y-axis scale in the intel_pstate_tracer utility (Doug
Smythies).
-----BEGIN PGP SIGNATURE-----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=cBQd
-----END PGP SIGNATURE-----
Merge tag 'pm-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These clean up and rework the PM QoS API, address a suspend-to-idle
wakeup regression on some ACPI-based platforms, clean up and extend a
few cpuidle drivers, update multiple cpufreq drivers and cpufreq
documentation, and fix a number of issues in devfreq and several other
things all over.
Specifics:
- Clean up and rework the PM QoS API to simplify the code and reduce
the size of it (Rafael Wysocki).
- Fix a suspend-to-idle wakeup regression on Dell XPS13 9370 and
similar platforms where the USB plug/unplug events are handled by
the EC (Rafael Wysocki).
- CLean up the intel_idle and PSCI cpuidle drivers (Rafael Wysocki,
Ulf Hansson).
- Extend the haltpoll cpuidle driver so that it can be forced to run
on some systems where it refused to load (Maciej Szmigiero).
- Convert several cpufreq documents to the .rst format and move the
legacy driver documentation into one common file (Mauro Carvalho
Chehab, Rafael Wysocki).
- Update several cpufreq drivers:
* Extend and fix the imx-cpufreq-dt driver (Anson Huang).
* Improve the -EPROBE_DEFER handling and fix unwanted CPU
overclocking on i.MX6ULL in imx6q-cpufreq (Anson Huang,
Christoph Niedermaier).
* Add support for Krait based SoCs to the qcom driver (Ansuel
Smith).
* Add support for OPP_PLUS to ti-cpufreq (Lokesh Vutla).
* Add platform specific intermediate callbacks support to
cpufreq-dt and update the imx6q driver (Peng Fan).
* Simplify and consolidate some pieces of the intel_pstate
driver and update its documentation (Rafael Wysocki, Alex
Hung).
- Fix several devfreq issues:
* Remove unneeded extern keyword from a devfreq header file and
use the DEVFREQ_GOV_UPDATE_INTERNAL event name instead of
DEVFREQ_GOV_INTERNAL (Chanwoo Choi).
* Fix the handling of dev_pm_qos_remove_request() result
(Leonard Crestez).
* Use constant name for userspace governor (Pierre Kuo).
* Get rid of doc warnings and fix a typo (Christophe JAILLET).
- Use built-in RCU list checking in some places in the PM core to
avoid false-positive RCU usage warnings (Madhuparna Bhowmik).
- Add explicit READ_ONCE()/WRITE_ONCE() annotations to low-level PM
QoS routines (Qian Cai).
- Fix removal of wakeup sources to avoid NULL pointer dereferences in
a corner case (Neeraj Upadhyay).
- Clean up the handling of hibernate compat ioctls and fix the
related documentation (Eric Biggers).
- Update the idle_inject power capping driver to use variable-length
arrays instead of zero-length arrays (Gustavo Silva).
- Fix list format in a PM QoS document (Randy Dunlap).
- Make the cpufreq stats module use scnprintf() to avoid potential
buffer overflows (Takashi Iwai).
- Add pm_runtime_get_if_active() to PM-runtime API (Sakari Ailus).
- Allow no domain-idle-states DT property in generic PM domains (Ulf
Hansson).
- Fix a broken y-axis scale in the intel_pstate_tracer utility (Doug
Smythies)"
* tag 'pm-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (78 commits)
cpufreq: intel_pstate: Simplify intel_pstate_cpu_init()
tools/power/x86/intel_pstate_tracer: fix a broken y-axis scale
ACPI: PM: s2idle: Refine active GPEs check
ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE
PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there
PM / devfreq: Get rid of some doc warnings
PM / devfreq: Fix handling dev_pm_qos_remove_request result
PM / devfreq: Fix a typo in a comment
PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event name
PM / devfreq: Remove unneeded extern keyword
PM / devfreq: Use constant name of userspace governor
ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late()
cpufreq: qcom: Add support for krait based socs
cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling
cpufreq: Use scnprintf() for avoiding potential buffer overflow
cpuidle: psci: Split psci_dt_cpu_init_idle()
PM / Domains: Allow no domain-idle-states DT property in genpd when parsing
PM / hibernate: Remove unnecessary compat ioctl overrides
PM: hibernate: fix docs for ioctls that return loff_t via pointer
Documentation: intel_pstate: update links for references
...
Its possible to have divergent ALU32 and ALU64 bounds when using JMP32
instructins and ALU64 arithmatic operations. Sometimes the clang will
even generate this code. Because the case is a bit tricky lets add
a specific test for it.
Here is pseudocode asm version to illustrate the idea,
1 r0 = 0xffffffff00000001;
2 if w0 > 1 goto %l[fail];
3 r0 += 1
5 if w0 > 2 goto %l[fail]
6 exit
The intent here is the verifier will fail the load if the 32bit bounds
are not tracked correctly through ALU64 op. Similarly we can check the
64bit bounds are correctly zero extended after ALU32 ops.
1 r0 = 0xffffffff00000001;
2 w0 += 1
2 if r0 > 3 goto %l[fail];
6 exit
The above will fail if we do not correctly zero extend 64bit bounds
after 32bit op.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158560430155.10843.514209255758200922.stgit@john-Precision-5820-Tower
After changes to add update_reg_bounds after ALU ops and 32-bit bounds
tracking truncation of boundary crossing range will fail earlier and with
a different error message. Now the test error trace is the following
11: (17) r1 -= 2147483584
12: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
R1_w=invP(id=0,smin_value=-2147483584,smax_value=63)
R10=fp0 fp-8_w=mmmmmmmm
12: (17) r1 -= 2147483584
13: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
R1_w=invP(id=0,
umin_value=18446744069414584448,umax_value=18446744071562068095,
var_off=(0xffffffff00000000; 0xffffffff))
R10=fp0 fp-8_w=mmmmmmmm
13: (77) r1 >>= 8
14: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0)
R1_w=invP(id=0,
umin_value=72057594021150720,umax_value=72057594029539328,
var_off=(0xffffffff000000; 0xffffff),
s32_min_value=-16777216,s32_max_value=-1,
u32_min_value=-16777216)
R10=fp0 fp-8_w=mmmmmmmm
14: (0f) r0 += r1
value 72057594021150720 makes map_value pointer be out of bounds
Because we have 'umin_value == umax_value' instead of previously
where 'umin_value != umax_value' we can now fail earlier noting
that pointer addition is out of bounds.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158560428103.10843.6316594510312781186.stgit@john-Precision-5820-Tower
With current ALU32 subreg handling and retval refine fix from last
patches we see an expected failure in test_verifier. With verbose
verifier state being printed at each step for clarity we have the
following relavent lines [I omit register states that are not
necessarily useful to see failure cause],
#101/p bpf_get_stack return R0 within range FAIL
Failed to load prog 'Success'!
[..]
14: (85) call bpf_get_stack#67
R0_w=map_value(id=0,off=0,ks=8,vs=48,imm=0)
R3_w=inv48
15:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
15: (b7) r1 = 0
16:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
16: (bf) r8 = r0
17:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
17: (67) r8 <<= 32
18:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smax_value=9223372032559808512,
umax_value=18446744069414584320,
var_off=(0x0; 0xffffffff00000000),
s32_min_value=0,
s32_max_value=0,
u32_max_value=0,
var32_off=(0x0; 0x0))
18: (c7) r8 s>>= 32
19
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smin_value=-2147483648,
smax_value=2147483647,
var32_off=(0x0; 0xffffffff))
19: (cd) if r1 s< r8 goto pc+16
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smin_value=-2147483648,
smax_value=0,
var32_off=(0x0; 0xffffffff))
20:
R0=inv(id=0,smax_value=48,var32_off=(0x0; 0xffffffff))
R1_w=inv0
R8_w=inv(id=0,smin_value=-2147483648,
smax_value=0,
R9=inv48
20: (1f) r9 -= r8
21: (bf) r2 = r7
22:
R2_w=map_value(id=0,off=0,ks=8,vs=48,imm=0)
22: (0f) r2 += r8
value -2147483648 makes map_value pointer be out of bounds
After call bpf_get_stack() on line 14 and some moves we have at line 16
an r8 bound with max_value 48 but an unknown min value. This is to be
expected bpf_get_stack call can only return a max of the input size but
is free to return any negative error in the 32-bit register space. The
C helper is returning an int so will use lower 32-bits.
Lines 17 and 18 clear the top 32 bits with a left/right shift but use
ARSH so we still have worst case min bound before line 19 of -2147483648.
At this point the signed check 'r1 s< r8' meant to protect the addition
on line 22 where dst reg is a map_value pointer may very well return
true with a large negative number. Then the final line 22 will detect
this as an invalid operation and fail the program. What we want to do
is proceed only if r8 is positive non-error. So change 'r1 s< r8' to
'r1 s> r8' so that we jump if r8 is negative.
Next we will throw an error because we access past the end of the map
value. The map value size is 48 and sizeof(struct test_val) is 48 so
we walk off the end of the map value on the second call to
get bpf_get_stack(). Fix this by changing sizeof(struct test_val) to
24 by using 'sizeof(struct test_val) / 2'. After this everything passes
as expected.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158560426019.10843.3285429543232025187.stgit@john-Precision-5820-Tower
Before this series the verifier would clamp return bounds of
bpf_get_stack() to [0, X] and this led the verifier to believe
that a JMP_JSLT 0 would be false and so would prune that path.
The result is anything hidden behind that JSLT would be unverified.
Add a test to catch this case by hiding an goto pc-1 behind the
check which will cause an infinite loop if not rejected.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158560423908.10843.11783152347709008373.stgit@john-Precision-5820-Tower
At one point in the release cycle I managed to fat finger things and
apply some SPI fixes onto a regulator branch and merge that into the SPI
tree, then pull in a change shared with the MTD tree moving the Mediatek
quadspi driver over to become the Mediatek spi-nor driver in the SPI
tree. This has made a mess which I only just noticed while preparing
this and I can't see a sensible way to unpick things due to other
subsequent merge commits especially the pull from MTD so it looks like
the most sensible thing to do is give up and combine the two pull
requests - I hope this is OK. Sorry about this, I've changed some bits
of workflow which should hopefully help me spot such issues earlier in
future.
Fortunately both subsystems were fairly quiet this cycle, the highlights
are:
regulator:
- Support for Monoloithic Power Systems MP5416, MP8867 and MPS8869 and
Qualcomm PMI8994 and SMB208.
SPI:
- Lots of enhancements for spi-fsl-dspi, including XSPI mode support,
from Vladimir Oltean.
- Support for amlogic Meson G12A, IBM FSI, Mediatek spi-nor (moved from
MTD), NXP i.MX8Mx, Rockchip PX30, RK3308 and RK3328, and Qualcomm
Atheros AR934x/QCA95xx.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl6B5OUTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0F64B/wMN9AALiI+L8yLWbhlCebJLrtX4Nc5
2Pe25eJNnYRor+s8SxWK7rJ1IlMHQv/lkD2kCtjtmAvLXQwxyy2r8gW0hsZ8bmUS
O1otrQ8wqfY8Enr8w/qXBMxR46U6vs1sfKDsAEPPUDt5voPbiDGpNazHytWU5Nnp
yLh/8LdACFbanueeth5b14aYZNRVHb04Dh6yDjZOKu0zgNtBmkTQGNN8A4jJyVHC
0SFE0vo1nYsc2w02U6i9ko/GEA/lRSTNZZslXif3wvZQXvy0EgC8sQGLbCdxu8ES
K2EBdeSCaMEoU+s2mFZ2Fuvd3RvGliHxWbn4SZtpaDp+/SBIu52kM4B+
=Eqwk
-----END PGP SIGNATURE-----
Merge tag 'regulator-spi-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc
Pull spi and regulator updates from Mark Brown:
"At one point in the release cycle I managed to fat finger things and
apply some SPI fixes onto a regulator branch and merge that into the
SPI tree, then pull in a change shared with the MTD tree moving the
Mediatek quadspi driver over to become the Mediatek spi-nor driver in
the SPI tree.
This has made a mess which I only just noticed while preparing this
and I can't see a sensible way to unpick things due to other
subsequent merge commits especially the pull from MTD so it looks like
the most sensible thing to do is give up and combine the two pull
requests.
Fortunately both subsystems were fairly quiet this cycle, the
highlights are:
regulator:
- Support for Monoloithic Power Systems MP5416, MP8867 and MPS8869
and Qualcomm PMI8994 and SMB208.
SPI:
- Lots of enhancements for spi-fsl-dspi, including XSPI mode support,
from Vladimir Oltean.
- Support for amlogic Meson G12A, IBM FSI, Mediatek spi-nor (moved
from MTD), NXP i.MX8Mx, Rockchip PX30, RK3308 and RK3328, and
Qualcomm Atheros AR934x/QCA95xx"
* tag 'regulator-spi-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: (118 commits)
spi: efm32: Convert to use GPIO descriptors
regulator: qcom_smd: Add pmi8994 regulator support
regulator: da9063: Fix get_mode() functions to read sleep field
spi: spi-fsl-lpspi: Replace zero-length array with flexible-array member
spi: spi-s3c24xx: Replace zero-length array with flexible-array member
spi: stm32: Fix comments compilation warnings
spi: atmel-quadspi: Add verbose debug facilities to monitor register accesses
spi: spi-fsl-dspi: Add support for LS1028A
spi: spi-fsl-dspi: Move invariant configs out of dspi_transfer_one_message
spi: spi-fsl-dspi: Fix interrupt-less DMA mode taking an XSPI code path
spi: spi-fsl-dspi: Avoid NULL pointer in dspi_slave_abort for non-DMA mode
spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion
spi: spi-fsl-dspi: Protect against races on dspi->words_in_flight
spi: spi-fsl-dspi: Avoid reading more data than written in EOQ mode
spi: spi-fsl-dspi: Fix bits-per-word acceleration in DMA mode
spi: spi-fsl-dspi: Fix little endian access to PUSHR CMD and TXDATA
spi: spi-fsl-dspi: Don't access reserved fields in SPI_MCR
regulator: driver.h: fix regulator_map_* function names
regulator: da9063: fix suspend
spi: mxs: Drop GPIO includes
...
Here is the "big" set of driver core changes for 5.7-rc1.
Nothing huge in here, just lots of little firmware core changes and use
of new apis, a libfs fix, a debugfs api change, and some driver core
deferred probe rework.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXoHLIg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yle2ACgjJJzRJl9Ckae3ms+9CS4OSFFZPsAoKSrXmFc
Z7goYQdZo1zz8c0RYDrJ
=Y91m
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core changes for 5.7-rc1.
Nothing huge in here, just lots of little firmware core changes and
use of new apis, a libfs fix, a debugfs api change, and some driver
core deferred probe rework.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (44 commits)
Revert "driver core: Set fw_devlink to "permissive" behavior by default"
driver core: Set fw_devlink to "permissive" behavior by default
driver core: Replace open-coded list_last_entry()
driver core: Read atomic counter once in driver_probe_done()
libfs: fix infoleak in simple_attr_read()
driver core: Add device links from fwnode only for the primary device
platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet
platform/x86: touchscreen_dmi: Add EFI embedded firmware info support
Input: icn8505 - Switch to firmware_request_platform for retreiving the fw
Input: silead - Switch to firmware_request_platform for retreiving the fw
selftests: firmware: Add firmware_request_platform tests
test_firmware: add support for firmware_request_platform
firmware: Add new platform fallback mechanism and firmware_request_platform()
Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking"
drivers: base: power: wakeup.c: Use built-in RCU list checking
component: allow missing unbind callback
debugfs: remove return value of debugfs_create_file_size()
debugfs: Check module state before warning in {full/open}_proxy_open()
firmware: fix a double abort case with fw_load_sysfs_fallback
arch_topology: Fix putting invalid cpu clk
...
Add support for testing UDP sk_assign to the existing tests.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200329225342.16317-6-joe@wand.net.nz
Attach a tc direct-action classifier to lo in a fresh network
namespace, and rewrite all connection attempts to localhost:4321
to localhost:1234 (for port tests) and connections to unreachable
IPv4/IPv6 IPs to the local socket (for address tests). Includes
implementations for both TCP and UDP.
Keep in mind that both client to server and server to client traffic
passes the classifier.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200329225342.16317-5-joe@wand.net.nz
Co-authored-by: Joe Stringer <joe@wand.net.nz>
Add support for TPROXY via a new bpf helper, bpf_sk_assign().
This helper requires the BPF program to discover the socket via a call
to bpf_sk*_lookup_*(), then pass this socket to the new helper. The
helper takes its own reference to the socket in addition to any existing
reference that may or may not currently be obtained for the duration of
BPF processing. For the destination socket to receive the traffic, the
traffic must be routed towards that socket via local route. The
simplest example route is below, but in practice you may want to route
traffic more narrowly (eg by CIDR):
$ ip route add local default dev lo
This patch avoids trying to introduce an extra bit into the skb->sk, as
that would require more invasive changes to all code interacting with
the socket to ensure that the bit is handled correctly, such as all
error-handling cases along the path from the helper in BPF through to
the orphan path in the input. Instead, we opt to use the destructor
variable to switch on the prefetch of the socket.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200329225342.16317-2-joe@wand.net.nz
- allow TSYNC and USER_NOTIF together (Tycho Andersen)
- Add missing compat_ioctl for notify (Sven Schnelle)
-----BEGIN PGP SIGNATURE-----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=Ejyd
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"A couple of seccomp updates. They're both mostly bug fixes that I
wanted to have sit in linux-next for a while:
- allow TSYNC and USER_NOTIF together (Tycho Andersen)
- add missing compat_ioctl for notify (Sven Schnelle)"
* tag 'seccomp-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Add missing compat_ioctl for notify
seccomp: allow TSYNC and USER_NOTIF together
- Lots of RST conversion work by Mauro, Daniel ALmeida, and others.
Maybe someday we'll get to the end of this stuff...maybe...
- Some organizational work to bring some order to the core-api manual.
- Various new docs and additions to the existing documentation.
- Typo fixes, warning fixes, ...
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl6BLf4PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YLhkIAIhcg6gxp0oZZ3KDfQyhvej0EWQGVDNkmloQ
O1VOSV3RJsZL9HwN9xSNnNfN5+hw5RUYVbn1s201uj6kovZY9qcTpHP2LCizUeGb
eFkSTmzkyAuAbJjuVLgMPDerJPEew0HnudiToeSpQeoIL1WB6YGd4/5H/cN1KLex
8ggjllcY0wOgbiFffmK6+tavDv7vT0lKTdwKRYh2nxu7zrPVVd1ZnW+RtntdTVQt
i+xwV6/YdWtg5C53IwBPpeyubX40vqaIjU8rzpLq5SCVbsZN14sSR709m1AYCOK0
i4VDWEhfA2XBi6Nycl5U0czuGziwoHrTgSCkS1mmSDujnpgfKM8=
=6YOS
-----END PGP SIGNATURE-----
Merge tag 'docs-5.7' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This has been a busy cycle for documentation work.
Highlights include:
- Lots of RST conversion work by Mauro, Daniel ALmeida, and others.
Maybe someday we'll get to the end of this stuff...maybe...
- Some organizational work to bring some order to the core-api
manual.
- Various new docs and additions to the existing documentation.
- Typo fixes, warning fixes, ..."
* tag 'docs-5.7' of git://git.lwn.net/linux: (123 commits)
Documentation: x86: exception-tables: document CONFIG_BUILDTIME_TABLE_SORT
MAINTAINERS: adjust to filesystem doc ReST conversion
docs: deprecated.rst: Add BUG()-family
doc: zh_CN: add translation for virtiofs
doc: zh_CN: index files in filesystems subdirectory
docs: locking: Drop :c:func: throughout
docs: locking: Add 'need' to hardirq section
docs: conf.py: avoid thousands of duplicate label warning on Sphinx
docs: prevent warnings due to autosectionlabel
docs: fix reference to core-api/namespaces.rst
docs: fix pointers to io-mapping.rst and io_ordering.rst files
Documentation: Better document the softlockup_panic sysctl
docs: hw-vuln: tsx_async_abort.rst: get rid of an unused ref
docs: perf: imx-ddr.rst: get rid of a warning
docs: filesystems: fuse.rst: supress a Sphinx warning
docs: translations: it: avoid duplicate refs at programming-language.rst
docs: driver.rst: supress two ReSt warnings
docs: trace: events.rst: convert some new stuff to ReST format
Documentation: Add io_ordering.rst to driver-api manual
Documentation: Add io-mapping.rst to driver-api manual
...
Health reporters should be registered with auto recover set to true.
Align dummy reporter behaviour with that, as in later patch the option to
set auto recover behaviour will be removed.
In addition, align netdevsim selftest to the new default value.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'pm_nl_ctl' was adding a trailing whitespace after having printed the
IP. But at the end, the IP element is currently always the last one.
The bash script launching 'pm_nl_ctl' had trailing whitespaces in the
expected result on purpose. But these whitespaces have been removed when
the patch has been applied upstream. To avoid trailing whitespaces in
the bash code, 'pm_nl_ctl' and expected results have now been adapted.
The MPTCP PM selftest can now pass again.
Fixes: eedbc68532 (selftests: add PM netlink functional tests)
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the pm netlink to configure the creation of several
subflows, and verify that via MIB counters.
Update the mptcp_connect program to allow reliable MP_JOIN
handshake even on small data file
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This introduces basic self-tests for the PM netlink,
checking the basic APIs and possible exceptional
values.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For historical reasons, there are several timestamping selftest targets
in selftests/networking/timestamping. Move them to the standard
directory for networking tests: selftests/net.
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds new netlink attribute to allow a user to (optionally)
specify the desired offload mode immediately upon MACSec link creation.
Separate iproute patch will be required to support this from user space.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Load/attach a BPF program that hooks to file_mprotect (int)
and bprm_committed_creds (void).
* Perform an action that triggers the hook.
* Verify if the audit event was received using the shared global
variables for the process executed.
* Verify if the mprotect returns a -EPERM.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Florent Revest <revest@google.com>
Reviewed-by: Thomas Garnier <thgarnie@google.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200329004356.27286-8-kpsingh@chromium.org
Since BPF_PROG_TYPE_LSM uses the same attaching mechanism as
BPF_PROG_TYPE_TRACING, the common logic is refactored into a static
function bpf_program__attach_btf_id.
A new API call bpf_program__attach_lsm is still added to avoid userspace
conflicts if this ever changes in the future.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Florent Revest <revest@google.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200329004356.27286-7-kpsingh@chromium.org
Introduce types and configs for bpf programs that can be attached to
LSM hooks. The programs can be enabled by the config option
CONFIG_BPF_LSM.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Florent Revest <revest@google.com>
Reviewed-by: Thomas Garnier <thgarnie@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Link: https://lore.kernel.org/bpf/20200329004356.27286-2-kpsingh@chromium.org
This adds a test to exercise the new bpf_map__set_initial_value() function.
The test simply overrides the global data section with all zeroes, and
checks that the new value makes it into the kernel map on load.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200329132253.232541-2-toke@redhat.com
For internal maps (most notably the maps backing global variables), libbpf
uses an internal mmaped area to store the data after opening the object.
This data is subsequently copied into the kernel map when the object is
loaded.
This adds a function to set a new value for that data, which can be used to
before it is loaded into the kernel. This is especially relevant for RODATA
maps, since those are frozen on load.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200329132253.232541-1-toke@redhat.com
This adds a new function to set the XDP fd while specifying the FD of the
program to replace, using the newly added IFLA_XDP_EXPECTED_FD netlink
parameter. The new function uses the opts struct mechanism to be extendable
in the future.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158515700857.92963.7052131201257841700.stgit@toke.dk
Fix a sharp edge in xsk_umem__create and xsk_socket__create. Almost all of
the members of the ring buffer structs are initialized, but the "cached_xxx"
variables are not all initialized. The caller is required to zero them.
This is needlessly dangerous. The results if you don't do it can be very bad.
For example, they can cause xsk_prod_nb_free and xsk_cons_nb_avail to return
values greater than the size of the queue. xsk_ring_cons__peek can return an
index that does not refer to an item that has been queued.
I have confirmed that without this change, my program misbehaves unless I
memset the ring buffers to zero before calling the function. Afterwards,
my program works without (or with) the memset.
Signed-off-by: Fletcher Dunn <fletcherd@valvesoftware.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/85f12913cde94b19bfcb598344701c38@valvesoftware.com
it's not really different from e.g. __sanitizer_cov_trace_cmp4();
as it is, the switches that generate an array of labels get
rejected by objtool, while slightly different set of cases
that gets compiled into a series of comparisons is accepted.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Enable the bpf_get_current_cgroup_id() helper for connect(), sendmsg(),
recvmsg() and bind-related hooks in order to retrieve the cgroup v2
context which can then be used as part of the key for BPF map lookups,
for example. Given these hooks operate in process context 'current' is
always valid and pointing to the app that is performing mentioned
syscalls if it's subject to a v2 cgroup. Also with same motivation of
commit 7723628101 ("bpf: Introduce bpf_skb_ancestor_cgroup_id helper")
enable retrieval of ancestor from current so the cgroup id can be used
for policy lookups which can then forbid connect() / bind(), for example.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/d2a7ef42530ad299e3cbb245e6c12374b72145ef.1585323121.git.daniel@iogearbox.net
In Cilium we're mainly using BPF cgroup hooks today in order to implement
kube-proxy free Kubernetes service translation for ClusterIP, NodePort (*),
ExternalIP, and LoadBalancer as well as HostPort mapping [0] for all traffic
between Cilium managed nodes. While this works in its current shape and avoids
packet-level NAT for inter Cilium managed node traffic, there is one major
limitation we're facing today, that is, lack of netns awareness.
In Kubernetes, the concept of Pods (which hold one or multiple containers)
has been built around network namespaces, so while we can use the global scope
of attaching to root BPF cgroup hooks also to our advantage (e.g. for exposing
NodePort ports on loopback addresses), we also have the need to differentiate
between initial network namespaces and non-initial one. For example, ExternalIP
services mandate that non-local service IPs are not to be translated from the
host (initial) network namespace as one example. Right now, we have an ugly
work-around in place where non-local service IPs for ExternalIP services are
not xlated from connect() and friends BPF hooks but instead via less efficient
packet-level NAT on the veth tc ingress hook for Pod traffic.
On top of determining whether we're in initial or non-initial network namespace
we also have a need for a socket-cookie like mechanism for network namespaces
scope. Socket cookies have the nice property that they can be combined as part
of the key structure e.g. for BPF LRU maps without having to worry that the
cookie could be recycled. We are planning to use this for our sessionAffinity
implementation for services. Therefore, add a new bpf_get_netns_cookie() helper
which would resolve both use cases at once: bpf_get_netns_cookie(NULL) would
provide the cookie for the initial network namespace while passing the context
instead of NULL would provide the cookie from the application's network namespace.
We're using a hole, so no size increase; the assignment happens only once.
Therefore this allows for a comparison on initial namespace as well as regular
cookie usage as we have today with socket cookies. We could later on enable
this helper for other program types as well as we would see need.
(*) Both externalTrafficPolicy={Local|Cluster} types
[0] https://github.com/cilium/cilium/blob/master/bpf/bpf_sock.c
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/c47d2346982693a9cf9da0e12690453aded4c788.1585323121.git.daniel@iogearbox.net
Commit 0161a94e2d ("tools: gpio: Correctly add make dependencies for
gpio_utils") added a make rule for gpio-utils-in.o but used $(output)
instead of the correct $(OUTPUT) for the output directory, breaking
out-of-tree build (O=xx) with the following error:
No rule to make target 'out/tools/gpio/gpio-utils-in.o', needed by 'out/tools/gpio/lsgpio-in.o'. Stop.
Fix that.
Fixes: 0161a94e2d ("tools: gpio: Correctly add make dependencies for gpio_utils")
Cc: <stable@vger.kernel.org>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Link: https://lore.kernel.org/r/20200325103154.32235-1-anssi.hannula@bitwise.fi
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A new file was added to the tracing directory that will allow a user to
place a PID into it and the task associated to that PID will not have its
events traced. If the event-fork option is enabled, then neither will the
children of that task have its events traced.
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
A new file was added to the tracing directory that will allow a user to
place a PID into it and the task associated to that PID will not be traced
by the function tracer. If the function-fork option is enabled, then neither
will the children of that task be traced by the function tracer.
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add to the "x86 instruction decoder - new instructions" test the
following instructions:
incsspd
incsspq
rdsspd
rdsspq
saveprevssp
rstorssp
wrssd
wrssq
wrussd
wrussq
setssbsy
clrssbsy
endbr32
endbr64
And the "notrack" prefix for indirect calls and jumps.
For information about the instructions, refer Intel Control-flow
Enforcement Technology Specification May 2019 (334525-003).
Committer testing:
$ perf test instr
67: x86 instruction decoder - new instructions : Ok
$
Then use verbose mode and check one of those new instructions:
$ perf test -v instr |& grep saveprevssp
Decoded ok: f3 0f 01 ea saveprevssp
Decoded ok: f3 0f 01 ea saveprevssp
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi v. Shankar <ravi.v.shankar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20200204171425.28073-3-yu-cheng.yu@intel.com
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the following CET instructions to the opcode map:
INCSSP:
Increment Shadow Stack pointer (SSP).
RDSSP:
Read SSP into a GPR.
SAVEPREVSSP:
Use "previous ssp" token at top of current Shadow Stack (SHSTK) to
create a "restore token" on the previous (outgoing) SHSTK.
RSTORSSP:
Restore from a "restore token" to SSP.
WRSS:
Write to kernel-mode SHSTK (kernel-mode instruction).
WRUSS:
Write to user-mode SHSTK (kernel-mode instruction).
SETSSBSY:
Verify the "supervisor token" pointed by MSR_IA32_PL0_SSP, set the
token busy, and set then Shadow Stack pointer(SSP) to the value of
MSR_IA32_PL0_SSP.
CLRSSBSY:
Verify the "supervisor token" and clear its busy bit.
ENDBR64/ENDBR32:
Mark a valid 64/32 bit control transfer endpoint.
Detailed information of CET instructions can be found in Intel Software
Developer's Manual.
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi v. Shankar <ravi.v.shankar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20200204171425.28073-2-yu-cheng.yu@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a new MACsec offloading option, MACSEC_OFFLOAD_MAC,
allowing a user to select a MAC as a provider for MACsec offloading
operations.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the .snapshot region operation for the dummy data region. This
enables a region snapshot to be taken upon request via the new
DEVLINK_CMD_REGION_SNAPSHOT command.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the test checks the observable effect of skbedit priority:
queueing of packets at the correct qdisc band. It therefore misses the fact
that the counters for offloaded rules are not updated. Add an extra check
for the counter.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add local header dependency in lib.mk. This enforces the dependency
blindly even when a test doesn't include the file, with the benefit
of a simpler common logic without requiring individual tests to have
special rule for it.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix memfd to support relocatable build (O=objdir). This calls out
source files necessary to build tests and simplfies the dependency
enforcement.
Tested the following:
Note that cross-build for fuse_mnt has dependency on -lfuse.
make all
make clean
make kselftest-install O=/arm64_build/ ARCH=arm64 HOSTCC=gcc \
CROSS_COMPILE=aarch64-linux-gnu- TARGETS=memfd
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix seccomp relocatable builds. This is a simple fix to use the
right lib.mk variable TEST_GEN_PROGS. Local header dependency
is addressed in a change to lib.mk as a framework change that
enforces the dependency without requiring changes to individual
tests.
The following use-cases work with this change:
In seccomp directory:
make all and make clean
From top level from main Makefile:
make kselftest-install O=objdir ARCH=arm64 HOSTCC=gcc \
CROSS_COMPILE=aarch64-linux-gnu- TARGETS=seccomp
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When a selftest would timeout before, the program would just fall over
and no accounting of failures would be reported (i.e. it would result in
an incomplete TAP report). Instead, add an explicit SIGALRM handler to
cleanly catch and report the timeout.
Before:
[==========] Running 2 tests from 2 test cases.
[ RUN ] timeout.finish
[ OK ] timeout.finish
[ RUN ] timeout.too_long
Alarm clock
After:
[==========] Running 2 tests from 2 test cases.
[ RUN ] timeout.finish
[ OK ] timeout.finish
[ RUN ] timeout.too_long
timeout.too_long: Test terminated by timeout
[ FAIL ] timeout.too_long
[==========] 1 / 2 tests passed.
[ FAILED ]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In order to better handle timeout failures, rearrange the child waiting
logic into a separate function. This is mostly a copy/paste with an
indentation change. To handle pid tracking, a new field is added for
the child pid. Also move the alarm() pairing into the function.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a missing raw dmesg test log to test the kunit_tool's dmesg parser.
test_prefix_poundsign and test_output_with_prefix_isolated_correctly
fail without this test log.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce KUNIT_SUBTEST_INDENT macro which corresponds to 4-space
indentation and KUNIT_SUBSUBTEST_INDENT macro which corresponds to
8-space indentation in line with TAP spec (e.g. see "Subtests"
section of https://node-tap.org/tap-protocol/).
Use these macros in place of one or two tabs in strings to clarify
why we are indenting.
Suggested-by: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A fixed y-axis scale was missed during a change to autoscale.
Correct it.
Fixes: 709bd70d07 ("tools/power/x86/intel_pstate_tracer: change several graphs to autoscale y-axis")
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When DSCP is updated through an offloaded pedit action, DSCP rewrite on
egress should be disabled. Add a test that check that it is so.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test that runs packets with dsfield set, and test that pedit adjusts
the DSCP or ECN parts or the whole field.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The $(CC) passed to arch_errno_names.sh may include a series of parameters
along with gcc itself. To avoid overwriting the following parameters of
arch_errno_names.sh and break the build like below, we just pick up the
first word of the $(CC).
find: unknown predicate `-m64/arch'
x86_64-wrs-linux-gcc: warning: '-x c' after last input file has no effect
x86_64-wrs-linux-gcc: error: unrecognized command line option '-m64/include/uapi/asm-generic/errno.h'
x86_64-wrs-linux-gcc: fatal error: no input files
Signed-off-by: He Zhe <zhe.he@windriver.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1581618066-187262-2-git-send-email-zhe.he@windriver.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Terms may have a NULL config in which case a strcmp will SEGV. This can
be reproduced with:
perf stat -e '*/event=?,nr/' sleep 1
Add a NULL check to avoid this. This was caught by LLVM's libfuzzer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200325164022.41385-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add to the "x86 instruction decoder - new instructions" test the following
instructions:
incsspd
incsspq
rdsspd
rdsspq
saveprevssp
rstorssp
wrssd
wrssq
wrussd
wrussq
setssbsy
clrssbsy
endbr32
endbr64
And the notrack prefix for indirect calls and jumps.
For information about the instructions, refer Intel Control-flow
Enforcement Technology Specification May 2019 (334525-003).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20200204171425.28073-3-yu-cheng.yu@intel.com
Add the following CET instructions to the opcode map:
INCSSP:
Increment Shadow Stack pointer (SSP).
RDSSP:
Read SSP into a GPR.
SAVEPREVSSP:
Use "previous ssp" token at top of current Shadow Stack (SHSTK) to
create a "restore token" on the previous (outgoing) SHSTK.
RSTORSSP:
Restore from a "restore token" to SSP.
WRSS:
Write to kernel-mode SHSTK (kernel-mode instruction).
WRUSS:
Write to user-mode SHSTK (kernel-mode instruction).
SETSSBSY:
Verify the "supervisor token" pointed by MSR_IA32_PL0_SSP, set the
token busy, and set then Shadow Stack pointer(SSP) to the value of
MSR_IA32_PL0_SSP.
CLRSSBSY:
Verify the "supervisor token" and clear its busy bit.
ENDBR64/ENDBR32:
Mark a valid 64/32 bit control transfer endpoint.
Detailed information of CET instructions can be found in Intel Software
Developer's Manual.
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20200204171425.28073-2-yu-cheng.yu@intel.com
Fix a copy-paste typo in a comment and error message.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200320205546.2396-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After changes to add update_reg_bounds after ALU ops and adding ALU32
bounds tracking the error message is changed in the 32-bit right shift
tests.
Test "#70/u bounds check after 32-bit right shift with 64-bit input FAIL"
now fails with,
Unexpected error message!
EXP: R0 invalid mem access
RES: func#0 @0
7: (b7) r1 = 2
8: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP2 R10=fp0 fp-8_w=mmmmmmmm
8: (67) r1 <<= 31
9: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP4294967296 R10=fp0 fp-8_w=mmmmmmmm
9: (74) w1 >>= 31
10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP0 R10=fp0 fp-8_w=mmmmmmmm
10: (14) w1 -= 2
11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP4294967294 R10=fp0 fp-8_w=mmmmmmmm
11: (0f) r0 += r1
math between map_value pointer and 4294967294 is not allowed
And test "#70/p bounds check after 32-bit right shift with 64-bit input
FAIL" now fails with,
Unexpected error message!
EXP: R0 invalid mem access
RES: func#0 @0
7: (b7) r1 = 2
8: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv2 R10=fp0 fp-8_w=mmmmmmmm
8: (67) r1 <<= 31
9: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv4294967296 R10=fp0 fp-8_w=mmmmmmmm
9: (74) w1 >>= 31
10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv0 R10=fp0 fp-8_w=mmmmmmmm
10: (14) w1 -= 2
11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv4294967294 R10=fp0 fp-8_w=mmmmmmmm
11: (0f) r0 += r1
last_idx 11 first_idx 0
regs=2 stack=0 before 10: (14) w1 -= 2
regs=2 stack=0 before 9: (74) w1 >>= 31
regs=2 stack=0 before 8: (67) r1 <<= 31
regs=2 stack=0 before 7: (b7) r1 = 2
math between map_value pointer and 4294967294 is not allowed
Before this series we did not trip the "math between map_value pointer..."
error because check_reg_sane_offset is never called in
adjust_ptr_min_max_vals(). Instead we have a register state that looks
like this at line 11*,
11: R0_w=map_value(id=0,off=0,ks=8,vs=8,
smin_value=0,smax_value=0,
umin_value=0,umax_value=0,
var_off=(0x0; 0x0))
R1_w=invP(id=0,
smin_value=0,smax_value=4294967295,
umin_value=0,umax_value=4294967295,
var_off=(0xfffffffe; 0x0))
R10=fp(id=0,off=0,
smin_value=0,smax_value=0,
umin_value=0,umax_value=0,
var_off=(0x0; 0x0)) fp-8_w=mmmmmmmm
11: (0f) r0 += r1
In R1 'smin_val != smax_val' yet we have a tnum_const as seen
by 'var_off(0xfffffffe; 0x0))' with a 0x0 mask. So we hit this check
in adjust_ptr_min_max_vals()
if ((known && (smin_val != smax_val || umin_val != umax_val)) ||
smin_val > smax_val || umin_val > umax_val) {
/* Taint dst register if offset had invalid bounds derived from
* e.g. dead branches.
*/
__mark_reg_unknown(env, dst_reg);
return 0;
}
So we don't throw an error here and instead only throw an error
later in the verification when the memory access is made.
The root cause in verifier without alu32 bounds tracking is having
'umin_value = 0' and 'umax_value = U64_MAX' from BPF_SUB which we set
when 'umin_value < umax_val' here,
if (dst_reg->umin_value < umax_val) {
/* Overflow possible, we know nothing */
dst_reg->umin_value = 0;
dst_reg->umax_value = U64_MAX;
} else { ...}
Later in adjust_calar_min_max_vals we previously did a
coerce_reg_to_size() which will clamp the U64_MAX to U32_MAX by
truncating to 32bits. But either way without a call to update_reg_bounds
the less precise bounds tracking will fall out of the alu op
verification.
After latest changes we now exit adjust_scalar_min_max_vals with the
more precise umin value, due to zero extension propogating bounds from
alu32 bounds into alu64 bounds and then calling update_reg_bounds.
This then causes the verifier to trigger an earlier error and we get
the error in the output above.
This patch updates tests to reflect new error message.
* I have a local patch to print entire verifier state regardless if we
believe it is a constant so we can get a full picture of the state.
Usually if tnum_is_const() then bounds are also smin=smax, etc. but
this is not always true and is a bit subtle. Being able to see these
states helps understand dataflow imo. Let me know if we want something
similar upstream.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158507161475.15666.3061518385241144063.stgit@john-Precision-5820-Tower
Overlapping header include additions in macsec.c
A bug fix in 'net' overlapping with the removal of 'version'
string in ena_netdev.c
Overlapping test additions in selftests Makefile
Overlapping PCI ID table adjustments in iwlwifi driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
For each prog/btf load we allocate and free 16 megs of verifier buffer.
On production systems it doesn't really make sense because the
programs/btf have gone through extensive testing and (mostly) guaranteed
to successfully load.
Let's assume successful case by default and skip buffer allocation
on the first try. If there is an error, start with BPF_LOG_BUF_SIZE
and double it on each ENOSPC iteration.
v3:
* Return -ENOMEM when can't allocate log buffer (Andrii Nakryiko)
v2:
* Don't allocate the buffer at all on the first try (Andrii Nakryiko)
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200325195521.112210-1-sdf@google.com
Has been unused since commit ef99b02b23 ("libbpf: capture value in BTF
type info for BTF-defined map defs").
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200325113655.19341-1-tklauser@distanz.ch
Pull networking fixes from David Miller:
1) Fix deadlock in bpf_send_signal() from Yonghong Song.
2) Fix off by one in kTLS offload of mlx5, from Tariq Toukan.
3) Add missing locking in iwlwifi mvm code, from Avraham Stern.
4) Fix MSG_WAITALL handling in rxrpc, from David Howells.
5) Need to hold RTNL mutex in tcindex_partial_destroy_work(), from Cong
Wang.
6) Fix producer race condition in AF_PACKET, from Willem de Bruijn.
7) cls_route removes the wrong filter during change operations, from
Cong Wang.
8) Reject unrecognized request flags in ethtool netlink code, from
Michal Kubecek.
9) Need to keep MAC in reset until PHY is up in bcmgenet driver, from
Doug Berger.
10) Don't leak ct zone template in act_ct during replace, from Paul
Blakey.
11) Fix flushing of offloaded netfilter flowtable flows, also from Paul
Blakey.
12) Fix throughput drop during tx backpressure in cxgb4, from Rahul
Lakkireddy.
13) Don't let a non-NULL skb->dev leave the TCP stack, from Eric
Dumazet.
14) TCP_QUEUE_SEQ socket option has to update tp->copied_seq as well,
also from Eric Dumazet.
15) Restrict macsec to ethernet devices, from Willem de Bruijn.
16) Fix reference leak in some ethtool *_SET handlers, from Michal
Kubecek.
17) Fix accidental disabling of MSI for some r8169 chips, from Heiner
Kallweit.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build
net: ena: Add PCI shutdown handler to allow safe kexec
selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED
selftests/net: add missing tests to Makefile
r8169: re-enable MSI on RTL8168c
net: phy: mdio-bcm-unimac: Fix clock handling
cxgb4/ptp: pass the sign of offset delta in FW CMD
net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_pop
net: cbs: Fix software cbs to consider packet sending time
net/mlx5e: Do not recover from a non-fatal syndrome
net/mlx5e: Fix ICOSQ recovery flow with Striding RQ
net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset
net/mlx5e: Enhance ICOSQ WQE info fields
net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure
selftests: netfilter: add nfqueue test case
netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress
netfilter: nft_fwd_netdev: validate family and chain type
netfilter: nft_set_rbtree: Detect partial overlaps on insertion
netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start()
netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion
...
The method of unwinding for kernel space is defined by the kernel
config, not by the value of --call-graph. Improve the documentation to
reflect this.
Signed-off-by: Tony Jones <tonyj@suse.de>
Link: http://lore.kernel.org/lkml/20200325164053.10177-1-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The lib files should not be defined as TEST_PROGS, or we will run them
in run_kselftest.sh.
Also remove ethtool_lib.sh exec permission.
Fixes: 81573b18f2 ("selftests/net/forwarding: add Makefile to install tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Find some tests are missed in Makefile by running:
for file in $(ls *.sh); do grep -q $file Makefile || echo $file; done
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework kunit_tool in order to allow .kunitconfig files to better enforce
that disabled items in .kunitconfig are disabled in the generated
.config.
Previously, kunit_tool simply enforced that any line present in
.kunitconfig was also present in .config, but this could cause problems
if a config option was disabled in .kunitconfig, but not listed in .config
due to (for example) having disabled dependencies.
To fix this, re-work the parser to track config names and values, and
require values to match unless they are explicitly disabled with the
"CONFIG_x is not set" comment (or by setting its value to 'n'). Those
"disabled" values will pass validation if omitted from the .config, but
not if they have a different value.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In preparation to adding a vmlinux.o specific pass, rearrange some
code. No functional changes intended.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.924304616@infradead.org
Perf shows there is significant time in find_rela_by_dest(); this is
because we have to iterate the address space per byte, looking for
relocation entries.
Optimize this by reducing the address space granularity.
This reduces objtool on vmlinux.o runtime from 4.8 to 4.4 seconds.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.861321325@infradead.org
Perf shows we spend a measurable amount of time spend cleaning up
right before we exit anyway. Avoid the needsless work and just
terminate.
This reduces objtool on vmlinux.o runtime from 5.4s to 4.8s
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.800720170@infradead.org
Perf showed that __hash_init() is a significant portion of
read_sections(), so instead of doing a per section rela_hash, use an
elf-wide rela_hash.
Statistics show us there are about 1.1 million relas, so size it
accordingly.
This reduces the objtool on vmlinux.o runtime to a third, from 15 to 5
seconds.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.739153726@infradead.org
Perf showed that find_symbol_by_name() takes time; add a symbol name
hash.
This shaves another second off of objtool on vmlinux.o runtime, down
to 15 seconds.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.676865656@infradead.org
Perf shows we're spending a lot of time in find_insn() and the
statistics show we have around 3.2 million instruction. Increase the
hash table size to reduce the bucket load from around 50 to 3.
This shaves about 2s off of objtool on vmlinux.o runtime, down to 16s.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.617882545@infradead.org
All of:
read_symbols(), find_symbol_by_offset(), find_symbol_containing(),
find_containing_func()
do a linear search of the symbols. Add an RB tree to make it go
faster.
This about halves objtool runtime on vmlinux.o, from 34s to 18s.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.499016559@infradead.org
In order to avoid yet another linear search of (20k) sections, add a
name based hash.
This reduces objtool runtime on vmlinux.o by some 10s to around 35s.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.440174280@infradead.org
In order to avoid a linear search (over 20k entries), add an
section_hash to the elf object.
This reduces objtool on vmlinux.o from a few minutes to around 45
seconds.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.381249993@infradead.org
Have it print a few numbers which can be used to size the hashtables.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.321381240@infradead.org
The symbol index is object wide, not per section, so it makes no sense
to have the symbol_hash be part of the section object. By moving it to
the elf object we avoid the linear sections iteration.
This reduces the runtime of objtool on vmlinux.o from over 3 hours (I
gave up) to a few minutes. The defconfig vmlinux.o has around 20k
sections.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.261852348@infradead.org
Now that func_for_each_insn() is available, rename
func_for_each_insn_all(). This gets us:
sym_for_each_insn() - iterate on symbol offset/len
func_for_each_insn() - iterate on insn->func
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.083720147@infradead.org
There is func_for_each_insn() and func_for_each_insn_all(), the both
iterate the instructions, but the first uses symbol offset/length
while the second uses insn->func.
Rename func_for_each_insn() to sym_for_eac_insn() because it iterates
on symbol information.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160924.024341229@infradead.org
Trivial 'cleanup' to save one indentation level and match
validate_call().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200324160923.963996225@infradead.org
This adds test cases for ptrace deadlocks.
Additionally fixes a compile problem in get_syscall_info.c,
observed with gcc-4.8.4:
get_syscall_info.c: In function 'get_syscall_info':
get_syscall_info.c:93:3: error: 'for' loop initial declarations are only
allowed in C99 mode
for (unsigned int i = 0; i < ARRAY_SIZE(args); ++i) {
^
get_syscall_info.c:93:3: note: use option -std=c99 or -std=gnu99 to compile
your code
Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
We recently regressed (cf. [1] and its corresponding fix in [2]) returning
ENOMEM when trying to create a process in a pid namespace whose init
process/child subreaper has already died. This has caused confusion at
least once before that (cf. [3]). Let's add a simple regression test to
catch this in the future.
[1]: 49cb2fc42c ("fork: extend clone3() to support setting a PID")
[2]: b26ebfe12f ("pid: Fix error return value in some cases")
[3]: 35f71bc0a0 ("fork: report pid reservation failure properly")
Cc: Corey Minyard <cminyard@mvista.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Adrian Reber <areber@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
"retain good changes" means that I left the help string split up instead
of having this weird thing where it tries to merge together the last three
lines and it looks **really** bad
Signed-off-by: Gabriel Ravier <gabravier@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
If '-o' was used more than 64 times in a single invocation of gpio-hammer,
this could lead to an overflow of the 'lines' array. This commit fixes
this by avoiding the overflow and giving a proper diagnostic back to the
user
Signed-off-by: Gabriel Ravier <gabravier@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Some specific tests in powerpc can take longer than the default 45
seconds that added in commit 852c8cbf34 ("selftests/kselftest/runner.sh:
Add 45 second timeout per test") to run, the following test result was
collected across 2 Power8 nodes and 1 Power9 node in our pool:
powerpc/benchmarks/futex_bench - 52s
powerpc/dscr/dscr_sysfs_test - 116s
powerpc/signal/signal_fuzzer - 88s
powerpc/tm/tm_unavailable_test - 168s
powerpc/tm/tm-poison - 240s
Thus they will fail with TIMEOUT error. Disable the timeout setting
for these sub-tests to allow them finish properly.
https://bugs.launchpad.net/bugs/1864642
Fixes: 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200318060004.10685-1-po-hsu.lin@canonical.com
The test case tm-signal-context-force-tm expects a segfault to happen
on returning from signal handler, and then does a setcontext() to run
the test again. However, the test doesn't always segfault, causing the
test to run a single time.
This patch fixes the test by putting it within a loop and jumping, via
setcontext, just prior to the loop in case it segfaults. This way we
get the desired behavior (run the test COUNT_MAX times) regardless if
it segfaults or not. This also reduces the use of setcontext for
control flow logic, keeping it only in the segfault handler.
Also, since 'count' is changed within the signal handler, it is
declared as volatile to prevent any compiler optimization getting
confused with asynchronous changes.
Signed-off-by: Gustavo Luiz Duarte <gustavold@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200211033831.11165-3-gustavold@linux.ibm.com
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) A new selftest for nf_queue, from Florian Westphal. This test
covers two recent fixes: 07f8e4d0fd ("tcp: also NULL skb->dev
when copy was needed") and b738a185be ("tcp: ensure skb->dev is
NULL before leaving TCP stack").
2) The fwd action breaks with ifb. For safety in next extensions,
make sure the fwd action only runs from ingress until it is extended
to be used from a different hook.
3) The pipapo set type now reports EEXIST in case of subrange overlaps.
Update the rbtree set to validate range overlaps, so far this
validation is only done only from userspace. From Stefano Brivio.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test case to check nf queue infrastructure.
Could be extended in the future to also cover serialization of
conntrack, uid and secctx attributes in nfqueue.
For now, this checks that 'queue bypass' works, that a queue rule with
no bypass option blocks traffic and that userspace receives the expected
number of packets.
For this we add two queues and hook all of
prerouting/input/forward/output/postrouting.
Packets get queued twice with a dummy base chain in between:
This passes with current nf tree, but reverting
commit 946c0d8e6e ("netfilter: nf_queue: fix reinject verdict handling")
makes this trip (it processes 30 instead of expected 20 packets).
v2: update config file with queue and other options missing/needed for
other tests.
v3: also test with tcp, this reveals problem with commit
28f8bfd1ac ("netfilter: Support iif matches in POSTROUTING"), due to
skb->dev pointing at another skb in the retransmit rbtree (skb->dev
aliases to rbnode child).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull perf tooling fixes from Ingo Molnar:
"A handful of tooling fixes all across the map, no kernel changes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools headers uapi: Update linux/in.h copy
perf probe: Do not depend on dwfl_module_addrsym()
perf probe: Fix to delete multiple probe event
perf parse-events: Fix reading of invalid memory in event parsing
perf python: Fix clang detection when using CC=clang-version
perf map: Fix off by one in strncpy() size argument
tools: Let O= makes handle a relative path with -C option
Perf gets dso details from two different sources. 1st, from builid
headers in perf.data and 2nd from MMAP2 samples. Dso from buildid
header does not have dso_id detail. And dso from MMAP2 samples does
not have buildid information. If detail of the same dso is present
at both the places, filename is common.
Previously, __dsos__findnew_link_by_longname_id() used to compare only
long or short names, but Commit 0e3149f86b ("perf dso: Move dso_id
from 'struct map' to 'struct dso'") also added a dso_id comparison.
Because of that, now perf is creating two different dso objects of the
same file, one from buildid header (with dso_id but without buildid)
and second from MMAP2 sample (with buildid but without dso_id).
This is causing issues with archive, buildid-list etc subcommands. Fix
this by comparing dso_id only when it's present. And incase dso is
present in 'dsos' list without dso_id, inject dso_id detail as well.
Before:
$ sudo ./perf buildid-list -H
0000000000000000000000000000000000000000 /usr/bin/ls
0000000000000000000000000000000000000000 /usr/lib64/ld-2.30.so
0000000000000000000000000000000000000000 /usr/lib64/libc-2.30.so
$ ./perf archive
perf archive: no build-ids found
After:
$ ./perf buildid-list -H
b6b1291d0cead046ed0fa5734037fa87a579adee /usr/bin/ls
641f0c90cfa15779352f12c0ec3c7a2b2b6f41e8 /usr/lib64/ld-2.30.so
675ace3ca07a0b863df01f461a7b0984c65c8b37 /usr/lib64/libc-2.30.so
$ ./perf archive
Now please run:
$ tar xvf perf.data.tar.bz2 -C ~/.debug
wherever you need to run 'perf report' on.
Committer notes:
Renamed is_empty_dso_id() to dso_id__empty() and inject_dso_id() to
dso__inject_id() to keep namespacing consistent.
Fixes: 0e3149f86b ("perf dso: Move dso_id from 'struct map' to 'struct dso'")
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200324042424.68366-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'snprintf' returns the number of characters which would be generated for
the given input.
If the returned value is *greater than* or equal to the buffer size, it
means that the output has been truncated.
Fix the overflow test accordingly.
Fixes: 7780c25bae ("perf tools: Allow ability to map cpus to nodes easily")
Fixes: 92a7e12780 ("perf cpumap: Add cpu__max_present_cpu()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: He Zhe <zhe.he@windriver.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200324070319.10901-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add creating event aliases to the pmu-events test.
So currently we verify that the generated pmu-events.c is as expected for
some test events. Now test that we generate aliases as expected for those
events during normal operation.
For that, we cycle through each HW PMU in the system, and use the test
events to create aliases, and verify those against known, expected values.
For core PMUs, we should create an alias for every event in
test_cpu_events[].
However, for uncore PMUs, they need to be matched by the pmu_event.pmu
member, so use test_uncore_events[]; so check the match beforehand with
pmu_uncore_alias_match().
A sample run is as follows for my x86 machine:
john@linux-3c19:~/linux> tools/perf/perf test -vv 10
10: PMU events :
--- start ---
...
testing PMU uncore_arb aliases: no events to match
testing PMU cstate_pkg aliases: no events to match
skipping testing PMU breakpoint
testing aliases PMU uncore_cbox_1: matched event unc_cbo_xsnp_response.miss_eviction
testing PMU uncore_cbox_1 aliases: pass
testing PMU power aliases: no events to match
testing aliases PMU cpu: matched event bp_l1_btb_correct
testing aliases PMU cpu: matched event bp_l2_btb_correct
testing aliases PMU cpu: matched event segment_reg_loads.any
testing aliases PMU cpu: matched event dispatch_blocked.any
testing aliases PMU cpu: matched event eist_trans
testing PMU cpu aliases: pass
testing PMU intel_pt aliases: no events to match
skipping testing PMU software
skipping testing PMU intel_bts
testing PMU uncore_imc aliases: no events to match
testing aliases PMU uncore_cbox_0: matched event unc_cbo_xsnp_response.miss_eviction
testing PMU uncore_cbox_0 aliases: pass
testing PMU cstate_core aliases: no events to match
skipping testing PMU tracepoint
testing PMU msr aliases: no events to match
test child finished with 0
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1584442939-8911-8-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf pmu-events test will want to use pmu_uncore_alias_match(), so
make it public.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1584442939-8911-7-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to decide whether a PMU is a core PMU.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1584442939-8911-6-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The initial test will verify that the test tables in generated pmu-events.c
match against known, expected values.
For known events added in pmu-events/arch/test, we need to add an entry
in test_cpu_aliases_events[] or test_uncore_events[].
A sample run is as follows for x86:
john@linux-3c19:~/linux> tools/perf/perf test -vv 10
10: PMU event aliases :
--- start ---
test child forked, pid 5316
testing event table bp_l1_btb_correct: pass
testing event table bp_l2_btb_correct: pass
testing event table segment_reg_loads.any: pass
testing event table dispatch_blocked.any: pass
testing event table eist_trans: pass
testing event table uncore_hisi_ddrc.flux_wcmd: pass
testing event table unc_cbo_xsnp_response.miss_eviction: pass
test child finished with 0
---- end ----
PMU event aliases: Ok
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
[ Fixup test_cpu_events[] and test_uncore_events[] sentinels to initialize one of its members to NULL, fixing the build in older compilers ]
Link: http://lore.kernel.org/lkml/1584442939-8911-5-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create pmu_add_cpu_aliases_map() from pmu_add_cpu_aliases(), so the caller
can pass the map; the pmu-events test would use this since there would
be no CPUID matching to a mapfile there.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1584442939-8911-4-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the goal of supporting pmu-events test case, introduce support for
a test events folder.
These test events can be used for testing generation of pmu-event tables
and alias creation for any arch.
When running the pmu-events test case, these test events will be used as
the platform-agnostic events, so aliases can be created per-PMU and
validated against known expected values.
To support the test events, add a "testcpu" entry in pmu_events_map[].
The pmu-events test will be able to lookup the events map for "testcpu",
to verify the generated tables against expected values.
The resultant generated pmu-events.c will now look like the following:
struct pmu_event pme_ampere_emag[] = {
{
.name = "ldrex_spec",
.event = "event=0x6c",
.desc = "Exclusive operation spe...",
.topic = "intrinsic",
.long_desc = "Exclusive operation ...",
},
...
};
struct pmu_event pme_test_cpu[] = {
{
.name = "uncore_hisi_ddrc.flux_wcmd",
.event = "event=0x2",
.desc = "DDRC write commands. Unit: hisi_sccl,ddrc ",
.topic = "uncore",
.long_desc = "DDRC write commands",
.pmu = "hisi_sccl,ddrc",
},
{
.name = "unc_cbo_xsnp_response.miss_eviction",
.event = "umask=0x81,event=0x22",
.desc = "Unit: uncore_cbox A cross-core snoop resulted ...",
.topic = "uncore",
.long_desc = "A cross-core snoop resulted from L3 ...",
.pmu = "uncore_cbox",
},
{
.name = "eist_trans",
.event = "umask=0x0,period=200000,event=0x3a",
.desc = "Number of Enhanced Intel SpeedStep(R) ...",
.topic = "other",
},
{
.name = 0,
},
};
struct pmu_events_map pmu_events_map[] = {
...
{
.cpuid = "0x00000000500f0000",
.version = "v1",
.type = "core",
.table = pme_ampere_emag
},
...
{
.cpuid = "testcpu",
.version = "v1",
.type = "core",
.table = pme_test_cpu,
},
{
.cpuid = 0,
.version = 0,
.type = 0,
.table = 0,
},
};
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1584442939-8911-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add some test PMU events. The events are randomly chosen from x86 and
arm64 JSONs. The events include CPU and uncore events.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1584442939-8911-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
2677625387 ("seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number")
That ends up automatically adding the new IPPROTO_ETHERNET to the socket
args beautifiers:
$ tools/perf/trace/beauty/socket_ipproto.sh > before
Apply this patch:
$ tools/perf/trace/beauty/socket_ipproto.sh > after
$ diff -u before after
--- before 2020-03-19 11:48:36.876673819 -0300
+++ after 2020-03-19 11:49:00.148541377 -0300
@@ -6,6 +6,7 @@
[132] = "SCTP",
[136] = "UDPLITE",
[137] = "MPLS",
+ [143] = "ETHERNET",
[17] = "UDP",
[1] = "ICMP",
[22] = "IDP",
$
Addresses this tools/perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Cc: David S. Miller <davem@davemloft.net>
Cc: Paolo Lungaroni <paolo.lungaroni@cnit.it>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch updates the PMCs for AMD Zen1 core based processors (Family
17h; Models 0 through 2F) to be in accordance with PMCs as
documented in the latest versions of the AMD Processor Programming
Reference [1], [2] and [3]. Note that some events, such as FPU pipe
assignment are missing in [1], and therefore [3] is included for full
coverage of events.
PMCs added:
fpu_pipe_assignment.dual{0|1|2|3}
fpu_pipe_assignment.total{0|1|2|3}
ls_mab_alloc.dc_prefetcher
ls_mab_alloc.stores
ls_mab_alloc.loads
bp_dyn_ind_pred
bp_de_redirect
PMC removed:
ex_ret_cond_misp
Cumulative counts, fpu_pipe_assignment.total and
fpu_pipe_assignment.dual, existed in v1, but did expose port-level
counters.
ex_ret_cond_misp has been removed as it has been removed from the latest
versions of the PPR, and when tested, always seems to sample zero as
tested on a Ryzen 3400G system.
[1]: Processor Programming Reference (PPR) for AMD Family 17h Models
01h,08h, Revision B2 Processors, 54945 Rev 3.03 - Jun 14, 2019.
[2]: Processor Programming Reference (PPR) for AMD Family 17h Model 18h,
Revision B1 Processors, 55570-B1 Rev 3.14 - Sep 26, 2019.
[3]: OSRR for AMD Family 17h processors, Models 00h-2Fh, 56255 Rev 3.03 - July, 2018
All of the PPRs can be found at:
https://bugzilla.kernel.org/show_bug.cgi?id=206537
Signed-off-by: Vijay Thakkar <vijaythakkar@me.com>
Acked-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jon Grimm <jon.grimm@amd.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: vijay thakkar <vijaythakkar@me.com>
Link: http://lore.kernel.org/lkml/20200318190002.307290-4-vijaythakkar@me.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch changes the previous blanket detection of AMD Family 17h
processors to be more specific to Zen1 core based products only by
replacing model detection regex pattern [[:xdigit:]]+ with
([12][0-9A-F]|[0-9A-F]), restricting to models 0 though 2f only.
This change is required to allow for the addition of separate PMU events
for Zen2 core based models in the following patches as those belong to
family 17h but have different PMCs. Current PMU events directory has
also been renamed to "amdzen1" from "amdfam17h" to reflect this
specificity.
Note that although this change does not break PMU counters for existing
zen1 based systems, it does disable the current set of counters for zen2
based systems. Counters for zen2 have been added in the following
patches in this patchset.
Signed-off-by: Vijay Thakkar <vijaythakkar@me.com>
Acked-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jon Grimm <jon.grimm@amd.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200318190002.307290-2-vijaythakkar@me.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit f01642e491 ("perf metricgroup: Support multiple events for
metricgroup") introduced support for multiple events in a metric group.
But with the current upstream, metric events names are not printed
properly incase we try to run multiple metric groups with overlapping
event.
With current upstream version, incase of overlapping metric events issue
is, we always start our comparision logic from start. So, the events
which already matched with some metric group also take part in
comparision logic. Because of that when we have overlapping events, we
end up matching current metric group event with already matched one.
For example, in skylake machine we have metric event CoreIPC and
Instructions. Both of them need 'inst_retired.any' event value. As
events in Instructions is subset of events in CoreIPC, they endup in
pointing to same 'inst_retired.any' value.
In skylake platform:
command:# ./perf stat -M CoreIPC,Instructions -C 0 sleep 1
Performance counter stats for 'CPU(s) 0':
1,254,992,790 inst_retired.any # 1254992790.0
Instructions
# 1.3 CoreIPC
977,172,805 cycles
1,254,992,756 inst_retired.any
1.000802596 seconds time elapsed
command:# sudo ./perf stat -M UPI,IPC sleep 1
Performance counter stats for 'sleep 1':
948,650 uops_retired.retire_slots
866,182 inst_retired.any # 0.7 IPC
866,182 inst_retired.any
1,175,671 cpu_clk_unhalted.thread
Patch fixes the issue by adding a new bool pointer 'evlist_used' to keep
track of events which already matched with some group by setting it
true. So, we skip all used events in list when we start comparision
logic. Patch also make some changes in comparision logic, incase we get
a match miss, we discard the whole match and start again with first
event id in metric event.
With this patch:
In skylake platform:
command:# ./perf stat -M CoreIPC,Instructions -C 0 sleep 1
Performance counter stats for 'CPU(s) 0':
3,348,415 inst_retired.any # 0.3 CoreIPC
11,779,026 cycles
3,348,381 inst_retired.any # 3348381.0
Instructions
1.001649056 seconds time elapsed
command:# ./perf stat -M UPI,IPC sleep 1
Performance counter stats for 'sleep 1':
1,023,148 uops_retired.retire_slots # 1.1 UPI
924,976 inst_retired.any
924,976 inst_retired.any # 0.6 IPC
1,489,414 cpu_clk_unhalted.thread
1.003064672 seconds time elapsed
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200221101121.28920-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a slight misalignment in -A -I output.
For example:
# perf stat -e cpu/event=cpu-cycles/ -a -A -I 1000
# time CPU counts unit events
1.000440863 CPU0 1,068,388 cpu/event=cpu-cycles/
1.000440863 CPU1 875,954 cpu/event=cpu-cycles/
1.000440863 CPU2 3,072,538 cpu/event=cpu-cycles/
1.000440863 CPU3 4,026,870 cpu/event=cpu-cycles/
1.000440863 CPU4 5,919,630 cpu/event=cpu-cycles/
1.000440863 CPU5 2,714,260 cpu/event=cpu-cycles/
1.000440863 CPU6 2,219,240 cpu/event=cpu-cycles/
1.000440863 CPU7 1,299,232 cpu/event=cpu-cycles/
The value of counts is not aligned with the column "counts" and
the event name is not aligned with the column "events".
With this patch, the output is,
# perf stat -e cpu/event=cpu-cycles/ -a -A -I 1000
# time CPU counts unit events
1.000423009 CPU0 997,421 cpu/event=cpu-cycles/
1.000423009 CPU1 1,422,042 cpu/event=cpu-cycles/
1.000423009 CPU2 484,651 cpu/event=cpu-cycles/
1.000423009 CPU3 525,791 cpu/event=cpu-cycles/
1.000423009 CPU4 1,370,100 cpu/event=cpu-cycles/
1.000423009 CPU5 442,072 cpu/event=cpu-cycles/
1.000423009 CPU6 205,643 cpu/event=cpu-cycles/
1.000423009 CPU7 1,302,250 cpu/event=cpu-cycles/
Now output is aligned.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200218071614.25736-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When performing "perf report --group", it shows the event group information
together. In previous patch, we have supported a new option "--group-sort-idx"
to sort the output by the event at the index n in event group.
It would be nice if we can use a hotkey in browser to select a event
to sort.
For example,
# perf report --group
Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, ...
Overhead Command Shared Object Symbol
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
1.56% 0.01% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494ce
1.56% 0.00% 0.00% 0.00% mgen [kernel.kallsyms] [k] task_tick_fair
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
0.00% 0.03% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] g_main_context_check
0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] apic_timer_interrupt
0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] check_preempt_curr
When user press hotkey '3' (event index, starting from 0), it indicates
to sort output by the forth event in group.
Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, ...
Overhead Command Shared Object Symbol
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
0.00% 0.00% 0.00% 0.06% swapper [kernel.kallsyms] [k] hrtimer_start_range_ns
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] update_curr
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] apic_timer_interrupt
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] native_apic_msr_eoi_write
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] __update_load_avg_se
v6:
---
Jiri provided a good improvement to eliminate unneeded refresh.
This improvement is added to v6.
v2:
---
1. Report warning at helpline when index is invalid.
2. Report warning at helpline when it's not group event.
3. Use "case '0' ... '9'" to refine the code
4. Split K_RELOAD implementation to another patch.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200220013616.19916-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes we may need to reload the browser to update the output since
some options are changed.
This patch creates a new key K_RELOAD. Once the __cmd_report() returns
K_RELOAD, it would repeat the whole process, such as, read samples from
data file, sort the data and display in the browser.
v5:
---
1. Fix the 'make NO_SLANG=1' error. Define K_RELOAD in util/hist.h.
2. Skip setup_sorting() in repeat path if last key is K_RELOAD.
v4:
---
Need to quit in perf_evsel_menu__run if key is K_RELOAD.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200220013616.19916-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When performing "perf report --group", it shows the event group
information together. By default, the output is sorted by the first
event in group.
It would be nice for user to select any event for sorting. This patch
introduces a new option "--group-sort-idx" to sort the output by the
event at the index n in event group.
For example,
Before:
# perf report --group --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, BR_MISP_RETIRED.ALL_BRANCHES:pp, cpu/event=0xc0,umask=1,cmask=1,
# Event count (approx.): 6451235635
#
# Overhead Command Shared Object Symbol
# ................................ ......... ....................... ...................................
#
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
1.56% 0.01% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494ce
1.56% 0.00% 0.00% 0.00% mgen [kernel.kallsyms] [k] task_tick_fair
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
0.00% 0.03% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] g_main_context_check
0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] apic_timer_interrupt
...
After:
# perf report --group --stdio --group-sort-idx 3
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, BR_MISP_RETIRED.ALL_BRANCHES:pp, cpu/event=0xc0,umask=1,cmask=1,
# Event count (approx.): 6451235635
#
# Overhead Command Shared Object Symbol
# ................................ ......... ....................... ...................................
#
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
0.00% 0.00% 0.00% 0.06% swapper [kernel.kallsyms] [k] hrtimer_start_range_ns
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] update_curr
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] apic_timer_interrupt
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] native_apic_msr_eoi_write
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] __update_load_avg_se
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] scheduler_tick
Now the output is sorted by the fourth event in group.
v7:
---
Rebase to latest perf/core, no other change.
v4:
---
1. Update Documentation/perf-report.txt to mention
'--group-sort-idx' support multiple groups with different
amount of events and it should be used on grouped events.
2. Update __hpp__group_sort_idx(), just return when the
idx is out of limit.
3. Return failure on symbol_conf.group_sort_idx && !session->evlist->nr_groups.
So now we don't need to use together with --group.
v3:
---
Refine the code in __hpp__group_sort_idx().
Before:
for (i = 1; i < nr_members; i++) {
if (i == idx) {
ret = field_cmp(fields_a[i], fields_b[i]);
if (ret)
goto out;
}
}
After:
if (idx >= 1 && idx < nr_members) {
ret = field_cmp(fields_a[idx], fields_b[idx]);
if (ret)
goto out;
}
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200220013616.19916-2-yao.jin@linux.intel.com
[ Renamed pair_fields_alloc() to hist_entry__new_pair() and combined decl + assignment of vars ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In previous patch, we have supported the annotation functionality even
without symbols.
For this patch, it supports the hotkey 'a' on address in report view.
Note that, for branch mode, we only support the annotation for "branch
to" address.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200227043939.4403-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For perf report on stripped binaries it is currently impossible to do
annotation. The annotation state is all tied to symbols, but there are
either no symbols, or symbols are not covering all the code.
We should support the annotation functionality even without symbols.
This patch fakes a symbol and the symbol name is the string of address.
After that, we just follow current annotation working flow.
For example,
1. perf report
Overhead Command Shared Object Symbol
20.67% div libc-2.27.so [.] __random_r
17.29% div libc-2.27.so [.] __random
10.59% div div [.] 0x0000000000000628
9.25% div div [.] 0x0000000000000612
6.11% div div [.] 0x0000000000000645
2. Select the line of "10.59% div div [.] 0x0000000000000628" and ENTER.
Annotate 0x0000000000000628
Zoom into div thread
Zoom into div DSO (use the 'k' hotkey to zoom directly into the kernel)
Browse map details
Run scripts for samples of symbol [0x0000000000000628]
Run scripts for all samples
Switch to another data file in PWD
Exit
3. Select the "Annotate 0x0000000000000628" and ENTER.
Percent│
│
│
│ Disassembly of section .text:
│
│ 0000000000000628 <.text+0x68>:
│ divsd %xmm4,%xmm0
│ divsd %xmm3,%xmm1
│ movsd (%rsp),%xmm2
│ addsd %xmm1,%xmm0
│ addsd %xmm2,%xmm0
│ movsd %xmm0,(%rsp)
Now we can see the dump of object starting from 0x628.
v5:
---
Remove the hotkey 'a' implementation from this patch. It
will be moved to a separate patch.
v4:
---
1. Support the hotkey 'a'. When we press 'a' on address,
now it supports the annotation.
2. Change the patch title from
"Support interactive annotation of code without symbols" to
"perf report: Support interactive annotation of code without symbols"
v3:
---
Keep just the ANNOTATION_DUMMY_LEN, and remove the
opts->annotate_dummy_len since it's the "maybe in future
we will provide" feature.
v2:
---
Fix a crash issue when annotating an address in "unknown" object.
The steps to reproduce this issue:
perf record -e cycles:u ls
perf report
75.29% ls ld-2.27.so [.] do_lookup_x
23.64% ls ld-2.27.so [.] __GI___tunables_init
1.04% ls [unknown] [k] 0xffffffff85c01210
0.03% ls ld-2.27.so [.] _start
When annotating 0xffffffff85c01210, the crash happens.
v2 adds checking for ms->map in add_annotate_opt(). If the object is
"unknown", ms->map is NULL.
Committer notes:
Renamed new_annotate_sym() to symbol__new_unresolved().
Use PRIx64 to fix this issue in some 32-bit arches:
ui/browsers/hists.c: In function 'symbol__new_unresolved':
ui/browsers/hists.c:2474:38: error: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'u64' {aka 'long long unsigned int'} [-Werror=format=]
snprintf(name, sizeof(name), "%-#.*lx", BITS_PER_LONG / 4, addr);
~~~~~~^ ~~~~
%-#.*llx
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200227043939.4403-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull RCU changes from Paul E. McKenney:
- Make kfree_rcu() use kfree_bulk() for added performance
- RCU updates
- Callback-overload handling updates
- Tasks-RCU KCSAN and sparse updates
- Locking torture test and RCU torture test updates
- Documentation updates
- Miscellaneous fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add missing Makefile for net/forwarding tests and include it to
the targets list, otherwise forwarding tests are not installed
in case of cross-compilation.
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kunit.py utility builds an ARCH=um kernel and then runs it. Add
optional --make_options flag to kunit.py allowing for the operator to
specify extra build options.
This allows use of the clang compiler for kunit:
tools/testing/kunit/kunit.py run --defconfig \
--make_options CC=clang --make_options HOSTCC=clang
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
To reduce the reliance of trace samples (trace*_user) on bpf_load,
move read_trace_pipe to trace_helpers. By moving this bpf_loader helper
elsewhere, trace functions can be easily migrated to libbbpf.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200321100424.1593964-2-danieltimlee@gmail.com
This patch adds test to exercise the bpf_sk_storage_get()
and bpf_sk_storage_delete() helper from the bpf_dctcp.c.
The setup and check on the sk_storage is done immediately
before and after the connect().
This patch also takes this chance to move the pthread_create()
after the connect() has been done. That will remove the need of
the "wait_thread" label.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200320152107.2169904-1-kafai@fb.com
Add an alternative format that can be more easily used for further
processing later on.
Note that we add a timestamp in the first column for both, the regular
and the new csv format.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20200306114250.57585-5-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This now controls both, the refresh rate of the interactive mode as well
as the logging mode. Which, as a consequence, means that the default of
logging mode is now 3s, too (use command line switch '-s' to adjust to
your liking).
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20200306114250.57585-4-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
optparse is deprecated for a while, hence switching over to argparse
(which also works with python2).
As a consequence, help output has some subtle changes, the most
significant one being that the options are all listed explicitly
instead of a universal '[options]' indicator. Also, some of the error
messages are phrased slightly different.
While at it, squashed a number of minor PEP8 issues.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20200306114250.57585-3-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure command line arguments are sorted alphabetically
everywhere, and adjusted existing texts for interactive command 's' to
become consistent with the long form --set-delay.
Throwing in some PEP8 fixes (all cosmetics) for good measure.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20200306114250.57585-2-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After copying Arm64's perf archive with object files and perf.data file
to x86 laptop, the x86's perf kernel symbol resolution fails. It
outputs 'unknown' for all symbols parsing.
This issue is root caused by the function elf__needs_adjust_symbols(),
x86 perf tool uses one weak version, Arm64 (and powerpc) has rewritten
their own version. elf__needs_adjust_symbols() decides if need to parse
symbols with the relative offset address; but x86 building uses the weak
function which misses to check for the elf type 'ET_DYN', so that it
cannot parse symbols in Arm DSOs due to the wrong result from
elf__needs_adjust_symbols().
The DSO parsing should not depend on any specific architecture perf
building; e.g. x86 perf tool can parse Arm and Arm64 DSOs, vice versa.
And confirmed by Naveen N. Rao that powerpc64 kernels are not being
built as ET_DYN anymore and change to ET_EXEC.
This patch removes the arch specific functions for Arm64 and powerpc and
changes elf__needs_adjust_symbols() as a common function.
In the common elf__needs_adjust_symbols(), it checks an extra condition
'ET_DYN' for elf header type. With this fixing, the Arm64 DSO can be
parsed properly with x86's perf tool.
Before:
# perf script
main 3258 1 branches: 0 [unknown] ([unknown]) => ffff800010c4665c [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c46670 [unknown] ([kernel.kallsyms]) => ffff800010c4eaec [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eaec [unknown] ([kernel.kallsyms]) => ffff800010c4eb00 [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eb08 [unknown] ([kernel.kallsyms]) => ffff800010c4e780 [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4e7a0 [unknown] ([kernel.kallsyms]) => ffff800010c4eeac [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eebc [unknown] ([kernel.kallsyms]) => ffff800010c4ed80 [unknown] ([kernel.kallsyms])
After:
# perf script
main 3258 1 branches: 0 [unknown] ([unknown]) => ffff800010c4665c coresight_timeout+0x54 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c46670 coresight_timeout+0x68 ([kernel.kallsyms]) => ffff800010c4eaec etm4_enable_hw+0x3cc ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eaec etm4_enable_hw+0x3cc ([kernel.kallsyms]) => ffff800010c4eb00 etm4_enable_hw+0x3e0 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eb08 etm4_enable_hw+0x3e8 ([kernel.kallsyms]) => ffff800010c4e780 etm4_enable_hw+0x60 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4e7a0 etm4_enable_hw+0x80 ([kernel.kallsyms]) => ffff800010c4eeac etm4_enable+0x2d4 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eebc etm4_enable+0x2e4 ([kernel.kallsyms]) => ffff800010c4ed80 etm4_enable+0x1a8 ([kernel.kallsyms])
v3: Changed to check for ET_DYN across all architectures.
v2: Fixed Arm64 and powerpc native building.
Reported-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Enrico Weigelt <info@metux.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lore.kernel.org/lkml/20200306015759.10084-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reproducible with a clang asan build and then running perf test in
particular 'Parse event definition strings'.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200314170356.62914-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Handy for testing with distro kernels.
Warn that the resulting module is completely unsupported,
and isn't intended for production use.
Usage:
make oot # builds vhost_test.ko, vhost.ko
make oot-clean # cleans out files created
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Many systems build/test up-to-date kernels with older libcs, and
an older glibc (2.17) lacks the definition of SOL_DCCP in
/usr/include/bits/socket.h (it was added in the 4.6 timeframe).
Adding the definition to the test program avoids a compilation
failure that gets in the way of building tools/testing/selftests/net.
The test itself will work once the definition is added; either
skipping due to DCCP not being configured in the kernel under test
or passing, so there are no other more up-to-date glibc dependencies
here it seems beyond that missing definition.
Fixes: 11fb60d108 ("selftests: net: reuseport_addr_any: add DCCP")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Statistics on timestamps is useful to quantify average and tail latency.
Print timestamp statistics in count/avg/min/max format.
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the following new flags:
-e: use level-triggered epoll() instead of poll().
-E: use event-triggered epoll() instead of poll().
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A longer sleep duration between sendmsg()s makes more cachelines to be
evicted and results in higher latency. Making the duration configurable.
Add the following new flags:
-S: Configurable sleep duration.
-b: Busy loop instead of poll().
Remove the following flag:
-D: No delay between packets: subsumed by -S.
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Txtimestamp reports latencies in uses resolution, while nsec is needed
in cases such as measuring latencies on localhost.
Add the following new flag:
-N: print timestamps and durations in nsec (instead of usec)
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The wrapper script txtimestamp.sh executes a pre-defined list of testcases
sequentially without configuration options available.
Add an option (-r/--run) to setup the test namespace and pass remaining
arguments to txtimestamp binary. The script still runs all tests when no
argument is passed.
Signed-off-by: Jian Yang <jianyang@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Continue what commit:
d820ac4c2f ("locking: rename trace_softirq_[enter|exit] => lockdep_softirq_[enter|exit]")
started, rename these to avoid confusing them with tracepoints.
git grep -l "trace_\(soft\|hard\)\(irq_context\|irqs_enabled\)" | while read file;
do
sed -ie 's/trace_\(soft\|hard\)\(irq_context\|irqs_enabled\)/lockdep_\1\2/g' $file;
done
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320115859.178626842@infradead.org
Continue what commit:
d820ac4c2f ("locking: rename trace_softirq_[enter|exit] => lockdep_softirq_[enter|exit]")
started, rename these to avoid confusing them with tracepoints.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320115859.060481361@infradead.org
Implemented the functionality to run all KUnit tests through kunit_tool
by specifying an --alltests flag, which builds UML with allyesconfig
enabled, and consequently runs every KUnit test. A new function was
added to kunit_kernel: make_allyesconfig.
Firstly, if --alltests is specified, kunit.py triggers build_um_kernel
which call make_allyesconfig. This function calls the make command,
disables the broken configs that would otherwise prevent UML from
building, then starts the kernel with all possible configurations
enabled. All stdout and stderr is sent to test.log and read from there
then fed through kunit_parser to parse the tests to the user. Also added
a signal_handler in case kunit is interrupted while running.
Tested: Run under different conditions such as testing with
--raw_output, testing program interrupt then immediately running kunit
again without --alltests and making sure to clean the console.
Signed-off-by: Heidi Fahim <heidifahim@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Previously, kunit_parser did not properly handle kunit TAP output that
- had any prefixes (generated from different configs e.g.
CONFIG_PRINTK_TIME)
- had unrelated kernel output mixed in the middle of
it, which has shown up when testing with allyesconfig
To remove prefixes, the parser looks for the first line that includes
TAP output, "TAP version 14". It then determines the length of the
string before this sequence, and strips that number of characters off
the beginning of the following lines until the last KUnit output line is
reached.
These fixes have been tested with additional tests in the
KUnitParseTest and their associated logs have also been added.
Signed-off-by: Heidi Fahim <heidifahim@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Clang's -Wmisleading-indentation warns about misleading indentations if
there's a mixture of spaces and tabs. Remove extraneous spaces.
Signed-off-by: Bill Wendling <morbo@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200320201510.217169-1-morbo@google.com
This patch adds struct_ops support to the bpftool.
To recap a bit on the recent bpf_struct_ops feature on the kernel side:
It currently supports "struct tcp_congestion_ops" to be implemented
in bpf. At a high level, bpf_struct_ops is struct_ops map populated
with a number of bpf progs. bpf_struct_ops currently supports the
"struct tcp_congestion_ops". However, the bpf_struct_ops design is
generic enough that other kernel struct ops can be supported in
the future.
Although struct_ops is map+progs at a high lever, there are differences
in details. For example,
1) After registering a struct_ops, the struct_ops is held by the kernel
subsystem (e.g. tcp-cc). Thus, there is no need to pin a
struct_ops map or its progs in order to keep them around.
2) To iterate all struct_ops in a system, it iterates all maps
in type BPF_MAP_TYPE_STRUCT_OPS. BPF_MAP_TYPE_STRUCT_OPS is
the current usual filter. In the future, it may need to
filter by other struct_ops specific properties. e.g. filter by
tcp_congestion_ops or other kernel subsystem ops in the future.
3) struct_ops requires the running kernel having BTF info. That allows
more flexibility in handling other kernel structs. e.g. it can
always dump the latest bpf_map_info.
4) Also, "struct_ops" command is not intended to repeat all features
already provided by "map" or "prog". For example, if there really
is a need to pin the struct_ops map, the user can use the "map" cmd
to do that.
While the first attempt was to reuse parts from map/prog.c, it ended up
not a lot to share. The only obvious item is the map_parse_fds() but
that still requires modifications to accommodate struct_ops map specific
filtering (for the immediate and the future needs). Together with the
earlier mentioned differences, it is better to part away from map/prog.c.
The initial set of subcmds are, register, unregister, show, and dump.
For register, it registers all struct_ops maps that can be found in an
obj file. Option can be added in the future to specify a particular
struct_ops map. Also, the common bpf_tcp_cc is stateless (e.g.
bpf_cubic.c and bpf_dctcp.c). The "reuse map" feature is not
implemented in this patch and it can be considered later also.
For other subcmds, please see the man doc for details.
A sample output of dump:
[root@arch-fb-vm1 bpf]# bpftool struct_ops dump name cubic
[{
"bpf_map_info": {
"type": 26,
"id": 64,
"key_size": 4,
"value_size": 256,
"max_entries": 1,
"map_flags": 0,
"name": "cubic",
"ifindex": 0,
"btf_vmlinux_value_type_id": 18452,
"netns_dev": 0,
"netns_ino": 0,
"btf_id": 52,
"btf_key_type_id": 0,
"btf_value_type_id": 0
}
},{
"bpf_struct_ops_tcp_congestion_ops": {
"refcnt": {
"refs": {
"counter": 1
}
},
"state": "BPF_STRUCT_OPS_STATE_INUSE",
"data": {
"list": {
"next": 0,
"prev": 0
},
"key": 0,
"flags": 0,
"init": "void (struct sock *) bictcp_init/prog_id:138",
"release": "void (struct sock *) 0",
"ssthresh": "u32 (struct sock *) bictcp_recalc_ssthresh/prog_id:141",
"cong_avoid": "void (struct sock *, u32, u32) bictcp_cong_avoid/prog_id:140",
"set_state": "void (struct sock *, u8) bictcp_state/prog_id:142",
"cwnd_event": "void (struct sock *, enum tcp_ca_event) bictcp_cwnd_event/prog_id:139",
"in_ack_event": "void (struct sock *, u32) 0",
"undo_cwnd": "u32 (struct sock *) tcp_reno_undo_cwnd/prog_id:144",
"pkts_acked": "void (struct sock *, const struct ack_sample *) bictcp_acked/prog_id:143",
"min_tso_segs": "u32 (struct sock *) 0",
"sndbuf_expand": "u32 (struct sock *) 0",
"cong_control": "void (struct sock *, const struct rate_sample *) 0",
"get_info": "size_t (struct sock *, u32, int *, union tcp_cc_info *) 0",
"name": "bpf_cubic",
"owner": 0
}
}
}
]
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200318171656.129650-1-kafai@fb.com
The kernel struct_ops obj has kernel's func ptrs implemented by bpf_progs.
The bpf prog_id is stored as the value of the func ptr for introspection
purpose. In the latter patch, a struct_ops dump subcmd will be added
to introspect these func ptrs. It is desired to print the actual bpf
prog_name instead of only printing the prog_id.
Since struct_ops is the only usecase storing prog_id in the func ptr,
this patch adds a prog_id_as_func_ptr bool (default is false) to
"struct btf_dumper" in order not to mis-interpret the ptr value
for the other existing use-cases.
While printing a func_ptr as a bpf prog_name,
this patch also prefix the bpf prog_name with the ptr's func_proto.
[ Note that it is the ptr's func_proto instead of the bpf prog's
func_proto ]
It reuses the current btf_dump_func() to obtain the ptr's func_proto
string.
Here is an example from the bpf_cubic.c:
"void (struct sock *, u32, u32) bictcp_cong_avoid/prog_id:140"
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200318171650.129252-1-kafai@fb.com
A char[] is currently printed as an integer array.
This patch will print it as a string when
1) The array element type is an one byte int
2) The array element type has a BTF_INT_CHAR encoding or
the array element type's name is "char"
3) All characters is between (0x1f, 0x7f) and it is terminated
by a null character.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200318171643.129021-1-kafai@fb.com
This patch prints the enum's name if there is one found in
the array of btf_enum.
The commit 9eea984979 ("bpf: fix BTF verification of enums")
has details about an enum could have any power-of-2 size (up to 8 bytes).
This patch also takes this chance to accommodate these non 4 byte
enums.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200318171637.128862-1-kafai@fb.com
Add tests cases for checking the new firmware_request_platform api.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20200115163554.101315-7-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix a spelling typo in error message.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fair number of changes including bug fixes done to change version.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
For platforms where multiple packages/die, this makes "Package-" key
duplicate. To make unique, add die and cpu id to key name.
So "Package-0" key name will change to "Package-0-die-x:cpu-x".
For example:
$sudo ./intel-speed-select -f json perf-profile info
Intel(R) Speed Select Technology
Executing on CPU model:106[0x6a]
{
"package-0:die-0:cpu-0": {
"perf-profile-level-0": {
"cpu-count": "32",
"enable-cpu-count": "32",
...
...
"package-1:die-0:cpu-16": {
"perf-profile-level-0": {
"cpu-count": "32",
"enable-cpu-count": "32",
"enable-cpu-mask": "ffff0000,ffff0000",
...
...
For non json format, there is no change. Here when print_package_info()
is called, it will return the level to print for other information.
This level is used formatting. Also in some function duplicate code
was there to print package,die and CPU information. Replace all that
code with a call to print_package_info().
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In addition to total CPU count also display "enabled-cpu-count" for
perf-profile info command. This will show number of CPUs in the
"enable-cpu-mask".
For example:
perf-profile-level-4
cpu-count:32
enable-cpu-count:16
enable-cpu-mask:e42d0000,e42d0000
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When user specifies invalid option, display "Unknown Option: ignore",
instead of "no match". Also display error for garbage on the command
line.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Specifying "avx2" and "avx512" option for display filter doesn't work
with short option "-r", only works with --try-type. Also compare full
6 characters for "avx512" string.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CLX doesn't have capability to change the feature in the hardware, but
this acts as "--auto | -a" option. So even if user didn't specify the
option, use this as --auto | -a to set cpufreq scaling frequency limits.
Also remove perror with debug_printf as they don't bring any value.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When --cpu or -c is used to specify target CPUs and non of them are valid,
display error.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This change adds improved error display and handling for commands related
to core-power feature. The changes include:
- Replace perror with helpful error message
- Use ordered priority for SKX based platform by default as the
proportional priority is not supported
- Don't show weight and epp in help and also give error when user
tries to set them in SKX based platforms
- Range check for epp and weights and display error
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Treat a case when mailbox/mmio command can't be handled by the kernel
drivers when the module is removed or send a command which no driver can
handle. In this case ENOTTY result is returned, so print error.
Also when the isst_if_mmio module is removed, we can't send CLOS message
messages via Mailbox on non SKX based platforms. When this module is
removed, isst_platform_info.mmio_supported is set to 0. So it can't be
used as a condition to send via mailbox. Here replace check for Skylake
based platform to send via mailbox, other platforms can't use mailbox in
lieu of MMIO.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This change adds improved error display and handling for commands related
to turbo-freq feature. The changes include:
- Replace perror/fprintf with helpful error message
- Error for not specifying TDP level when required
- Show error for invalid bucket number
- Show message to enable core-power before enabling turbo-freq feature
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This change adds improved error display and handling for commands related
to base-freq feature. The changes include:
- Replace perror/fprintf with helpful error message
- Error for not specifying TDP level when required
- For CLX show help which shows limitation
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Improve output of perf-profile commands:
get-config-enabled
get-lock-status
Instead of showing 0/1, show meaningful strings. Also show error when
command is failed.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Enhance help to specify CPU and clos by an example.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When priority type for core-power enable command is anything more than 1
display error before change to 1, which is ordered priority.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Before looking for information about the base-freq or turbo-freq details,
first check if the feature is supported at that level. If not print error
and return.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
This change adds improved error display and handling for commands related
to perf-profile feature. The changes include:
- When invalid TDP level is passed. display error and exit
- Replace perror with helpful error message
- Show error when TDP level can't be set
- Print error when information can't be read for a level
- Validate user options for invalid level
- Display error for TDP lock status
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add a common API which can be used to print all error and information
messages. In this way a common format can be used.
For json output an error index in suffixed to make unique error key.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add additional information, which will allow user to detect available
features. This will allow users to check presence of features before
continue to test.
A sample output:
$sudo ./intel-speed-select --info
Intel(R) Speed Select Technology
Executing on CPU model:85[0x55]
Platform: API version : 1
Platform: Driver version : 1
Platform: mbox supported : 1
Platform: mmio supported : 0
Intel(R) SST-PP (feature perf-profile) is not supported
Only performance level 0 (base level) is present
TDP level change control is locked
Intel(R) SST-TF (feature turbo-freq) is supported
Intel(R) SST-BF (feature base-freq) is supported
Intel(R) SST-CP (feature core-power) is supported
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Enhance help message which adds some example. The changes include:
- Print help when options are not recognized.
- For CLX, display only options which are applicable.
- Sort options in alphatical order.
- Disply help() instead of error:
"Feature name and|or command not specified"
- Remove duplicate display of
Intel(R) Speed Select Technology
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When the device file "/dev/isst_interface" is not present, instead of
failing on access, check at the start and print a helpful warning.
Here CLX platform is an exception, which doesn't depend on the device
file. So continue for CLX platform.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Once the CPU is offline, the topology information (core-id, package-id,
die-id) is not accessible via sysfs. So when user selects a config level
more than base config 0 and offlined CPUs to match the config level,
to return to base config he has to manually online CPUs before. Without
this CPUs information mapping from Punit CPU numbering will lot work
as it needs atlest package id for each CPU.
To avoid this additional steps store the topology information in a file
, which is created on the very first run after boot. Since system boots
in base config and all CPUs are online, we can get information about
every CPU.
Once any of the APIs like get_physical_package_id(),
get_physical_core_id() or get_physical_die_id() fails to read from
sysfs, read from the stored mapping file.
This mapping file is stored in /tmp file system. so on every boot
it is recreated to make sure that any new CPUs are added to the
system before boot are taken into account.
But don't use the stored physical device id when trying to get
information for CPU to send message in for_each_online_package_in_set().
Here use the real value from syfs and in case fails try the next CPU.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Currently /sys/devices/system/cpu/cpu0/topology/thread_siblings is used to
get the max CPU count. But when CPU0 is offline, then this file will be
absent.
So add processing so that we can get count from any first CPU in the
system. which is online.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When "-o" option for force online/offline is used with command:
perf-profile set-config-level
If the config level calls for CPU 0 online/offline, then call fails
as there is special kernel setup required for CPU 0 online/offline
and the currently not setup for that.
But when call is for online CPU 0, then don't fail. Just warn that
this system is not setup for CPU 0 online/offline.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Instead of displaying 0 and 1 for enable status, display "disabled"
and "enabled" respectively.
Similarly for priority type, display "ordered or proportional" instead
of 0 and 1.
An example display:
$intel-speed-select -c 1 core-power info
Intel(R) Speed Select Technology
..
package-0
die-0
cpu-1
core-power
support-status:supported
enable-status:enabled
clos-enable-status:enabled
priority-type:proportional
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In addition to CLOS enable status, also show the core-power feature
status. This will help why clos enable status didn't give desired
results as the core-power feature may be disabled or unsupported.
The new display looks as follows:
$intel-speed-select core-power info
Intel(R) Speed Select Technology
..
package-0
die-0
cpu-0
core-power
support-status:supported
enable-status:enabled
clos-enable-status:1
priority-type:0
In the above display "support-status" and "enable-status", shows the
status of the core-power feature and "clos-enable-status", shows the
status of the clos.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Currently "-c" is a mandatory option for "core-power info" command. Make
this optional as this is a per package/die property. When not specified,
it will print info for every package/die.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When CPU is offline, we can't get package id. So print error for this
and don't use output.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Here topology_max_cpus is used for total CPU count, not the last CPU
number. So remove "-1".
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Even for the products using MMIO, this message needs to be sent via
mail box. The previous fix done for this didn't properly address this.
That fix simply removed sending command via MMIO, but still didn't
trigger sending via mailbox.
Add additional condition to check for CLOS_PM_QOS_CONFIG, when MMIO
is supported on a platform.
Fixes: cd0e637065 (tools/power/x86/intel-speed-select: Use mailbox for CLOS_PM_QOS_CONFIG)
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
test_vdso would try to call a NULL pointer if the vDSO was missing.
vdso_restorer_32 hit a genuine failure: trying to use the
kernel-provided signal restorer doesn't work if the vDSO is missing.
Skip the test if the vDSO is missing, since the test adds no particular
value in that case.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/618ea7b8c55b10d08b1cb139e9a3a957934b8647.1584653439.git.luto@kernel.org
Some Chromebook BIOS' do not export an ACPI LPIT, which is how
Linux finds the residency counter for CPU and SYSTEM low power states,
that is exports in /sys/devices/system/cpu/cpuidle/*residency_us
When these sysfs attributes are missing, check the debugfs attrubte
from the pmc_core driver, which accesses the same counter value.
Signed-off-by: Len Brown <len.brown@intel.com>
From a turbostat point of view the Tremont-based Elkhart Lake
is very similar to Goldmont, reuse the code of Goldmont.
Elkhart Lake does not support 'group turbo limit counter'
nor C3, adjust the code accordingly.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Jasper Lake, like Elkhart Lake, uses a Tremont CPU.
So reuse the code.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
From a turbostat point of view, Ice Lake server looks like Sky Lake server.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
From a turbostat point of view, Tiger Lake looks like Ice Lake.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Warning: ‘__builtin_strncpy’ specified bound 20 equals destination size
[-Wstringop-truncation]
reduce param to strncpy, to guarantee that a null byte is always copied
into destination buffer.
Signed-off-by: Len Brown <len.brown@intel.com>
From a turbostat point of view, Cometlake is like Kabylake.
Suggested-by: Rui Zhang <rui.zhang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add a test that runs traffic through a port such that skbedit priority
action acts on it during forwarding. Test that at egress, it is classified
correctly according to the new priority at a PRIO qdisc.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test triggers a TM Bad Thing by raising a signal in transactional state
and forcing a pagefault to happen in kernelspace when the kernel signal
handling code first touches the user signal stack.
This is inspired by the test tm-signal-context-force-tm but uses userfaultfd to
make the test deterministic. While this test always triggers the bug in one
run, I had to execute tm-signal-context-force-tm several times (the test runs
5000 times each execution) to trigger the same bug.
tm-signal-context-force-tm is kept instead of replaced because, while this test
is more reliable and triggers the same bug, tm-signal-context-force-tm has a
better coverage, in the sense that by running the test several times it might
trigger the pagefault and/or be preempted at different places.
v3: skip test if userfaultfd is unavailable.
Signed-off-by: Gustavo Luiz Duarte <gustavold@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200211033831.11165-2-gustavold@linux.ibm.com
There's two different paths through the sigreturn code, depending on
whether the VDSO is mapped or not. We recently discovered a bug in the
unmapped case, because it's not commonly used these days.
So add a test that sends itself a signal, then moves the VDSO, takes
another signal and finally unmaps the VDSO before sending itself
another signal. That tests the standard signal path, the code that
handles the VDSO being moved, and also the signal path in the case
where the VDSO is unmapped.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200304110402.6038-1-mpe@ellerman.id.au
The ftrace selftest "ftrace - test for function traceon/off triggers"
enables all events and reads the trace file. Now that the trace file does
not disable tracing, and will attempt to continually read new data that is
added, the selftest gets stuck reading the trace file. This is because the
data added to the trace file will fill up quicker than the reading of it.
By only enabling scheduling events, the read can keep up with the writes.
Instead of enabling all events, only enable the scheduler events.
Link: http://lkml.kernel.org/r/20200318111345.0516642e@gandalf.local.home
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
To get the changes in:
2677625387 ("seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number")
That ends up automatically adding the new IPPROTO_ETHERNET to the socket
args beautifiers:
$ tools/perf/trace/beauty/socket_ipproto.sh > before
Apply this patch:
$ tools/perf/trace/beauty/socket_ipproto.sh > after
$ diff -u before after
--- before 2020-03-19 11:48:36.876673819 -0300
+++ after 2020-03-19 11:49:00.148541377 -0300
@@ -6,6 +6,7 @@
[132] = "SCTP",
[136] = "UDPLITE",
[137] = "MPLS",
+ [143] = "ETHERNET",
[17] = "UDP",
[1] = "ICMP",
[22] = "IDP",
$
Addresses this tools/perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Cc: David S. Miller <davem@davemloft.net>
Cc: Paolo Lungaroni <paolo.lungaroni@cnit.it>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record:
Alexey Budankov:
- Fix binding of AIO user space buffers to nodes
maps:
Dominik b. Czarnota:
- Fix off by one in strncpy() size argument.
Arnaldo Carvalho de Melo:
- Use strstarts() to look for Android libraries.
Ian Rogers:
- Give synthetic mmap events an inode generation.
man pages:
Ian Rogers:
- Set man page date to last git commit.
perf test:
Ian Rogers:
- Print if shell directory isn't present.
perf report:
Jin Yao:
- Fix no branch type statistics report issue.
perf expr:
Jiri Olsa:
- Fix copy/paste mistake
vendor events:
Kan Liang:
- Support metric constraints.
vendor events intel:
Kan Liang:
- Add NO_NMI_WATCHDOG metric constraint.
vendor events s390:
Thomas Richter:
- Add new deflate counters for IBM z15.
ARM cs-etm:
Leo Yan:
- Last branch improvements.
intel-pt:
Adrian Hunter:
- Update intel-pt.txt file with new location of the documentation.
- Add Intel PT man page references.
- Rename intel-pt.txt and put it in man page format.
perl scripting:
Michael Petlan:
- Add common_callchain to fix argument order.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXnFBiwAKCRCyPKLppCJ+
J4sOAQDTh5w3GFDOKzFHLqXWOE9mlsXnS7tHdkypuRweBpuQXQEA0Sq125ludwe7
pzZ1MFqZJ85lw0mfDqBV9E1PlgQz8Q8=
=1uH9
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.7-20200317' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf record:
Alexey Budankov:
- Fix binding of AIO user space buffers to nodes
maps:
Dominik b. Czarnota:
- Fix off by one in strncpy() size argument.
Arnaldo Carvalho de Melo:
- Use strstarts() to look for Android libraries.
Ian Rogers:
- Give synthetic mmap events an inode generation.
man pages:
Ian Rogers:
- Set man page date to last git commit.
perf test:
Ian Rogers:
- Print if shell directory isn't present.
perf report:
Jin Yao:
- Fix no branch type statistics report issue.
perf expr:
Jiri Olsa:
- Fix copy/paste mistake
vendor events:
Kan Liang:
- Support metric constraints.
vendor events intel:
Kan Liang:
- Add NO_NMI_WATCHDOG metric constraint.
vendor events s390:
Thomas Richter:
- Add new deflate counters for IBM z15.
ARM cs-etm:
Leo Yan:
- Last branch improvements.
intel-pt:
Adrian Hunter:
- Update intel-pt.txt file with new location of the documentation.
- Add Intel PT man page references.
- Rename intel-pt.txt and put it in man page format.
perl scripting:
Michael Petlan:
- Add common_callchain to fix argument order.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Conflicts:
tools/perf/util/map.c
perf probe:
Masami Hiramatsu:
- Fix deletion of multiple probe events.
- Fix userspace libraries handling by not depending on dwfl_module_addrsym().
Event parsing:
Ian Rogers:
- Fix reading of invalid memory in event parsing.
python binding:
Ilie Halip:
- Fix clang detection when using CC=clang-version.
build:
Masami Hiramatsu:
- Fix O= use with relative paths.
Android:
Dominik b. Czarnota:
- Fix off by one in strncpy() size argument when handling Android
libraries.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXmZSRAAKCRCyPKLppCJ+
JwRrAQCrtJnNothjpZuzQTAouu4vA5BRoUOQvrvN1CSK+baaMwEAonaSfWGgYDDp
W9Vt51C9iNFY/Oz3vI11s/gefyyrAw4=
=bi0c
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.6-20200309' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
perf probe:
Masami Hiramatsu:
- Fix deletion of multiple probe events.
- Fix userspace libraries handling by not depending on dwfl_module_addrsym().
Event parsing:
Ian Rogers:
- Fix reading of invalid memory in event parsing.
python binding:
Ilie Halip:
- Fix clang detection when using CC=clang-version.
build:
Masami Hiramatsu:
- Fix O= use with relative paths.
Android:
Dominik b. Czarnota:
- Fix off by one in strncpy() size argument when handling Android
libraries.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This adds a stress test that should hopefully help us catch regressions
for [1], [2], and [3].
[1]: 2669b8b0c7 ("binder: prevent UAF for binderfs devices")
[2]: f0fe2c0f05 ("binder: prevent UAF for binderfs devices II")
[3]: 211b64e4b5 ("binderfs: use refcount for binder control devices too")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200313152420.138777-3-christian.brauner@ubuntu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unprivileged users will be able to create directories in there. The
unprivileged test for /dev wouldn't have worked on most systems.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200313152420.138777-2-christian.brauner@ubuntu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Makes for nicer output and prepares for additional tests.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200313152420.138777-1-christian.brauner@ubuntu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We precompute the static-static ECDH during configuration time, in order
to save an expensive computation later when receiving network packets.
However, not all ECDH computations yield a contributory result. Prior,
we were just not letting those peers be added to the interface. However,
this creates a strange inconsistency, since it was still possible to add
other weird points, like a valid public key plus a low-order point, and,
like points that result in zeros, a handshake would not complete. In
order to make the behavior more uniform and less surprising, simply
allow all peers to be added. Then, we'll error out later when doing the
crypto if there's an issue. This also adds more separation between the
crypto layer and the configuration layer.
Discussed-with: Mathias Hall-Andersen <mathias@hall-andersen.dk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case this helps expose bugs with the newer 64-bit time_t types, we do
our testing with the newer musl that supports this as well as
CONFIG_COMPAT_32BIT_TIME=n. This matters to us, since wireguard does in
fact deal with timestamps.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit removes a duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests for mlxsw hw_stats types.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the change that made the code to query counter bank size from device
instead of using hard-coded value, the number of available counters
changed for Spectrum-2. Adjust the limit in the selftests.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The steal_time test's timespec stop condition was wrong and should have
used the timespec functions instead to avoid being wrong, but
timespec_diff had a strange interface. Rework all the timespec API and
its use.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously we could get the report of branch type statistics.
For example:
# perf record -j any,save_type ...
# t perf report --stdio
#
# Branch Statistics:
#
COND_FWD: 40.6%
COND_BWD: 4.1%
CROSS_4K: 24.7%
CROSS_2M: 12.3%
COND: 44.7%
UNCOND: 0.0%
IND: 6.1%
CALL: 24.5%
RET: 24.7%
But now for the recent perf, it can't report the branch type statistics.
It's a regression issue caused by commit 40c39e3046 ("perf report: Fix
a no annotate browser displayed issue"), which only counts the branch
type statistics for browser mode.
This patch moves the branch_type_count() outside of ui__has_annotation()
checking, then branch type statistics can work for stdio mode.
Fixes: 40c39e3046 ("perf report: Fix a no annotate browser displayed issue")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200313134607.12873-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When mmap2 events are synthesized the ino_generation field isn't being
set leading to uninitialized memory being compared.
Caught with clang's -fsanitize=memory:
==124733==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x55a96a6a65cc in __dso_id__cmp tools/perf/util/dsos.c:23:6
#1 0x55a96a6a81d5 in dso_id__cmp tools/perf/util/dsos.c:38:9
#2 0x55a96a6a717f in __dso__cmp_long_name tools/perf/util/dsos.c:74:15
#3 0x55a96a6a6c4c in __dsos__findnew_link_by_longname_id tools/perf/util/dsos.c:106:12
#4 0x55a96a6a851e in __dsos__findnew_by_longname_id tools/perf/util/dsos.c:178:9
#5 0x55a96a6a7798 in __dsos__find_id tools/perf/util/dsos.c:191:9
#6 0x55a96a6a7b57 in __dsos__findnew_id tools/perf/util/dsos.c:251:20
#7 0x55a96a6a7a57 in dsos__findnew_id tools/perf/util/dsos.c:259:17
#8 0x55a96a7776ae in machine__findnew_dso_id tools/perf/util/machine.c:2709:9
#9 0x55a96a77dfcf in map__new tools/perf/util/map.c:193:10
#10 0x55a96a77240a in machine__process_mmap2_event tools/perf/util/machine.c:1670:8
#11 0x55a96a7741a3 in machine__process_event tools/perf/util/machine.c:1882:9
#12 0x55a96a6aee39 in perf_event__process tools/perf/util/event.c:454:9
#13 0x55a96a87d633 in perf_tool__process_synth_event tools/perf/util/synthetic-events.c:63:9
#14 0x55a96a87f131 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:403:7
#15 0x55a96a8815d6 in __event__synthesize_thread tools/perf/util/synthetic-events.c:548:9
#16 0x55a96a882bff in __perf_event__synthesize_threads tools/perf/util/synthetic-events.c:681:3
#17 0x55a96a881ec2 in perf_event__synthesize_threads tools/perf/util/synthetic-events.c:750:9
#18 0x55a96a562b26 in synth_all tools/perf/tests/mmap-thread-lookup.c:136:9
#19 0x55a96a5623b1 in mmap_events tools/perf/tests/mmap-thread-lookup.c:174:8
#20 0x55a96a561fa0 in test__mmap_thread_lookup tools/perf/tests/mmap-thread-lookup.c:230:2
#21 0x55a96a52c182 in run_test tools/perf/tests/builtin-test.c:378:9
#22 0x55a96a52afc1 in test_and_print tools/perf/tests/builtin-test.c:408:9
#23 0x55a96a52966e in __cmd_test tools/perf/tests/builtin-test.c:603:4
#24 0x55a96a52855d in cmd_test tools/perf/tests/builtin-test.c:747:9
#25 0x55a96a2844d4 in run_builtin tools/perf/perf.c:312:11
#26 0x55a96a282bd0 in handle_internal_command tools/perf/perf.c:364:8
#27 0x55a96a284097 in run_argv tools/perf/perf.c:408:2
#28 0x55a96a282223 in main tools/perf/perf.c:538:3
Uninitialized value was stored to memory at
#1 0x55a96a6a18f7 in dso__new_id tools/perf/util/dso.c:1230:14
#2 0x55a96a6a78ee in __dsos__addnew_id tools/perf/util/dsos.c:233:20
#3 0x55a96a6a7bcc in __dsos__findnew_id tools/perf/util/dsos.c:252:21
#4 0x55a96a6a7a57 in dsos__findnew_id tools/perf/util/dsos.c:259:17
#5 0x55a96a7776ae in machine__findnew_dso_id tools/perf/util/machine.c:2709:9
#6 0x55a96a77dfcf in map__new tools/perf/util/map.c:193:10
#7 0x55a96a77240a in machine__process_mmap2_event tools/perf/util/machine.c:1670:8
#8 0x55a96a7741a3 in machine__process_event tools/perf/util/machine.c:1882:9
#9 0x55a96a6aee39 in perf_event__process tools/perf/util/event.c:454:9
#10 0x55a96a87d633 in perf_tool__process_synth_event tools/perf/util/synthetic-events.c:63:9
#11 0x55a96a87f131 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:403:7
#12 0x55a96a8815d6 in __event__synthesize_thread tools/perf/util/synthetic-events.c:548:9
#13 0x55a96a882bff in __perf_event__synthesize_threads tools/perf/util/synthetic-events.c:681:3
#14 0x55a96a881ec2 in perf_event__synthesize_threads tools/perf/util/synthetic-events.c:750:9
#15 0x55a96a562b26 in synth_all tools/perf/tests/mmap-thread-lookup.c:136:9
#16 0x55a96a5623b1 in mmap_events tools/perf/tests/mmap-thread-lookup.c:174:8
#17 0x55a96a561fa0 in test__mmap_thread_lookup tools/perf/tests/mmap-thread-lookup.c:230:2
#18 0x55a96a52c182 in run_test tools/perf/tests/builtin-test.c:378:9
#19 0x55a96a52afc1 in test_and_print tools/perf/tests/builtin-test.c:408:9
Uninitialized value was stored to memory at
#0 0x55a96a7725af in machine__process_mmap2_event tools/perf/util/machine.c:1646:25
#1 0x55a96a7741a3 in machine__process_event tools/perf/util/machine.c:1882:9
#2 0x55a96a6aee39 in perf_event__process tools/perf/util/event.c:454:9
#3 0x55a96a87d633 in perf_tool__process_synth_event tools/perf/util/synthetic-events.c:63:9
#4 0x55a96a87f131 in perf_event__synthesize_mmap_events tools/perf/util/synthetic-events.c:403:7
#5 0x55a96a8815d6 in __event__synthesize_thread tools/perf/util/synthetic-events.c:548:9
#6 0x55a96a882bff in __perf_event__synthesize_threads tools/perf/util/synthetic-events.c:681:3
#7 0x55a96a881ec2 in perf_event__synthesize_threads tools/perf/util/synthetic-events.c:750:9
#8 0x55a96a562b26 in synth_all tools/perf/tests/mmap-thread-lookup.c:136:9
#9 0x55a96a5623b1 in mmap_events tools/perf/tests/mmap-thread-lookup.c:174:8
#10 0x55a96a561fa0 in test__mmap_thread_lookup tools/perf/tests/mmap-thread-lookup.c:230:2
#11 0x55a96a52c182 in run_test tools/perf/tests/builtin-test.c:378:9
#12 0x55a96a52afc1 in test_and_print tools/perf/tests/builtin-test.c:408:9
#13 0x55a96a52966e in __cmd_test tools/perf/tests/builtin-test.c:603:4
#14 0x55a96a52855d in cmd_test tools/perf/tests/builtin-test.c:747:9
#15 0x55a96a2844d4 in run_builtin tools/perf/perf.c:312:11
#16 0x55a96a282bd0 in handle_internal_command tools/perf/perf.c:364:8
#17 0x55a96a284097 in run_argv tools/perf/perf.c:408:2
#18 0x55a96a282223 in main tools/perf/perf.c:538:3
Uninitialized value was created by a heap allocation
#0 0x55a96a22f60d in malloc llvm/llvm-project/compiler-rt/lib/msan/msan_interceptors.cpp:925:3
#1 0x55a96a882948 in __perf_event__synthesize_threads tools/perf/util/synthetic-events.c:655:15
#2 0x55a96a881ec2 in perf_event__synthesize_threads tools/perf/util/synthetic-events.c:750:9
#3 0x55a96a562b26 in synth_all tools/perf/tests/mmap-thread-lookup.c:136:9
#4 0x55a96a5623b1 in mmap_events tools/perf/tests/mmap-thread-lookup.c:174:8
#5 0x55a96a561fa0 in test__mmap_thread_lookup tools/perf/tests/mmap-thread-lookup.c:230:2
#6 0x55a96a52c182 in run_test tools/perf/tests/builtin-test.c:378:9
#7 0x55a96a52afc1 in test_and_print tools/perf/tests/builtin-test.c:408:9
#8 0x55a96a52966e in __cmd_test tools/perf/tests/builtin-test.c:603:4
#9 0x55a96a52855d in cmd_test tools/perf/tests/builtin-test.c:747:9
#10 0x55a96a2844d4 in run_builtin tools/perf/perf.c:312:11
#11 0x55a96a282bd0 in handle_internal_command tools/perf/perf.c:364:8
#12 0x55a96a284097 in run_argv tools/perf/perf.c:408:2
#13 0x55a96a282223 in main tools/perf/perf.c:538:3
SUMMARY: MemorySanitizer: use-of-uninitialized-value tools/perf/util/dsos.c:23:6 in __dso_id__cmp
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200313053129.131264-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use PT_REGS_RC instead of PT_REGS_RET to get ret correctly.
Fixes: df8ff35311 ("libbpf: Merge selftests' bpf_trace_helpers.h into libbpf's bpf_tracing.h")
Signed-off-by: Wenbo Zhang <ethercflow@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200315083252.22274-1-ethercflow@gmail.com
Some tests and sub-tests are setting "custom" thread/process affinity and
don't reset it back. Instead of requiring each test to undo all this, ensure
that thread affinity is restored by test_progs test runner itself.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200314013932.4035712-3-andriin@fb.com
When specifying disjoint set of tests, test_progs doesn't set skipped test's
array elements to false. This leads to spurious execution of tests that should
have been skipped. Fix it by explicitly initializing them to false.
Fixes: 3a516a0a3a ("selftests/bpf: add sub-tests support for test_progs")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200314013932.4035712-2-andriin@fb.com
Previous attempt to make tcp_rtt more robust introduced a new race, in which
server_done might be set to true before server can actually accept any
connection. Fix this by unconditionally waiting for accept(). Given socket is
non-blocking, if there are any problems with client side, it should eventually
close listening FD and let server thread exit with failure.
Fixes: 4cd729fa02 ("selftests/bpf: Make tcp_rtt test more robust to failures")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200314013932.4035712-1-andriin@fb.com
Amazingly, some libc implementations don't call __NR_nanosleep syscall from
their nanosleep() APIs. Hammer it down with explicit syscall() call and never
get back to it again. Also simplify code for timespec initialization.
I verified that nanosleep is called w/ printk and in exactly same Linux image
that is used in Travis CI. So it should both sleep and call correct syscall.
v1->v2:
- math is too hard, fix usec -> nsec convertion (Martin);
- test_vmlinux has explicit nanosleep() call, convert that one as well.
Fixes: 4e1fd25d19 ("selftests/bpf: Fix usleep() implementation")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200314002743.3782677-1-andriin@fb.com
Remove unused len variable, which causes compilation warnings.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200314001834.3727680-1-andriin@fb.com
1. Allow to disable gisa
2. protected virtual machines
Protected VMs (PVM) are KVM VMs, where KVM can't access the VM's
state like guest memory and guest registers anymore. Instead the
PVMs are mostly managed by a new entity called Ultravisor (UV),
which provides an API, so KVM and the PV can request management
actions.
PVMs are encrypted at rest and protected from hypervisor access
while running. They switch from a normal operation into protected
mode, so we can still use the standard boot process to load a
encrypted blob and then move it into protected mode.
Rebooting is only possible by passing through the unprotected/normal
mode and switching to protected again.
One mm related patch will go via Andrews mm tree ( mm/gup/writeback:
add callbacks for inaccessible pages)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=x6Hn
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Features and Enhancements for 5.7 part1
1. Allow to disable gisa
2. protected virtual machines
Protected VMs (PVM) are KVM VMs, where KVM can't access the VM's
state like guest memory and guest registers anymore. Instead the
PVMs are mostly managed by a new entity called Ultravisor (UV),
which provides an API, so KVM and the PV can request management
actions.
PVMs are encrypted at rest and protected from hypervisor access
while running. They switch from a normal operation into protected
mode, so we can still use the standard boot process to load a
encrypted blob and then move it into protected mode.
Rebooting is only possible by passing through the unprotected/normal
mode and switching to protected again.
One mm related patch will go via Andrews mm tree ( mm/gup/writeback:
add callbacks for inaccessible pages)
Check that guest doesn't hang when an invalid eVMCS GPA is specified.
Testing that #UD is injected would probably be better but selftests lack
the infrastructure currently.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check that VMfailInvalid happens when eVMCS revision is is invalid.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM allows to use revision_id from MSR_IA32_VMX_BASIC as eVMCS revision_id
to workaround a bug in genuine Hyper-V (see the comment in
nested_vmx_handle_enlightened_vmptrld()), this shouldn't be used by
default. Switch to using KVM_EVMCS_VERSION(1).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Changed all tests and utilities to use TEST_FAIL macro
instead of TEST_ASSERT(false,...).
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some tests/utilities use the TEST_ASSERT(false, ...) pattern to
indicate a failure and stop execution.
This change introduces the TEST_FAIL macro which is a wrap around
TEST_ASSERT(false, ...) and so provides a direct alternative for
failing a test.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Normal reset and initial CPU reset do not clear all registers. Add a
test that those registers are NOT changed.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should not only test the oneregs or the get_(x)regs interfaces but
also the sync_regs. Those are usually the canonical place for register
content.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The guest crashes very early due to changes in the control registers
used by dynamic address translation. Let us use different registers
that will not crash the guest.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The steal-time test confirms what is reported to the guest as stolen
time is consistent with the run_delay reported for the VCPU thread
on the host. Both x86_64 and AArch64 have the concept of steal/stolen
time so this test is introduced for both architectures.
While adding the test we ensure .gitignore has all tests listed
(it was missing s390x/resets) and that the Makefile has all tests
listed in alphabetical order (not really necessary, but it almost
was already...). We also extend the common API with a new num-guest-
pages call and a new timespec call.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Also correct the comment and prototype for vm_create_default(),
as it takes a number of pages, not a size.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the format attribute to enable printf format warnings, and
then fix them all.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
acrs are 32 bit and not 64 bit.
Reported-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
value is u64 and not string.
Reported-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move function documentation comment blocks to the header files in
order to avoid duplicating them for each architecture. While at
it clean up and fix up the comment blocks.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add svm_vmcall_test to gitignore list, and realphabetize it.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
s390 requires 1M aligned guest sizes. Embedding the rounding in
vm_adjust_num_guest_pages() allows us to remove it from a few
other places.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the new capability KVM_DIRTY_LOG_INITIALLY_SET of
KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 has been introduced, tweak the
clear_dirty_log_test to use it.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TEST_ASSERT in x86_64/platform_info_test.c would have print 'ucall'
instead of 'uc.cmd'. Also fix all uc.cmd format types.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a KVM selftest to test moving the base gfn of a userspace memory
region. Although the basic concept of moving memory regions is not x86
specific, the assumptions regarding large pages and MMIO shenanigans
used to verify the correctness make this x86_64 only for the time being.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We leave some printf's because they inform the user the test is being
skipped. QUIET should not disable those. We also leave the printf's
used for help text.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There were a few problems with the way we output "debug" messages.
The first is that we used DEBUG() which is defined when NDEBUG is
not defined, but NDEBUG will never be defined for kselftests
because it relies too much on assert(). The next is that most
of the DEBUG() messages were actually "info" messages, which
users may want to turn off if they just want a silent test that
either completes or asserts. Finally, a debug message output from
a library function, and thus for all tests, was annoying when its
information wasn't interesting for a test.
Rework these messages so debug messages only output when DEBUG
is defined and info messages output unless QUIET is defined.
Also name the functions pr_debug and pr_info and make sure that
when they're disabled we eat all the inputs. The later avoids
unused variable warnings when the variables were only defined
for the purpose of printing.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to quantify demand paging performance, time guest execution
during demand paging.
Signed-off-by: Ben Gardon <bgardon@google.com>
[Move timespec-diff to test_util.h]
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most VMs have multiple vCPUs, the concurrent execution of which has a
substantial impact on demand paging performance. Add an option to create
multiple vCPUs to each access disjoint regions of memory.
Signed-off-by: Ben Gardon <bgardon@google.com>
[guest_code() can't return, use GUEST_ASSERT(). Ensure the number
of guests pages is compatible with the host.]
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently vcpu_args_set is only implemented for x86. This makes writing
tests with multiple vCPUs difficult as each guest vCPU must either a.)
do the same thing or b.) derive some kind of unique token from it's
registers or the architecture. To simplify the process of writing tests
with multiple vCPUs for s390 and aarch64, add set args functions for
those architectures.
Signed-off-by: Ben Gardon <bgardon@google.com>
[Fixed array index (num => i) and made some style changes.]
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for supporting multiple vCPUs in the demand paging test,
pass arguments to the vCPU in a consolidated global struct instead of
syncing multiple globals.
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an argument to allow the demand paging test to work on larger and
smaller guest sizes.
Signed-off-by: Ben Gardon <bgardon@google.com>
[Rewrote parse_size() to simplify and provide user more flexibility as
to how sizes are input. Also fixed size overflow assert.]
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running the demand paging test with the -u option, the User Fault
FD handler essentially adds an arbitrary delay to page fault resolution.
To enable better simulation of a real demand paging scenario, add a
configurable delay to the UFFD handler.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The demand paging test is currently a simple page access test which, while
potentially useful, doesn't add much versus the existing dirty logging
test. To improve the demand paging test, add a basic userfaultfd demand
paging implementation.
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- AMD uncore driver:
Replace the open coded sanity check with the core variant, which
provides the correct error code and also leaves a hint in dmesg
- tools:
- Fix the stdio input handling with glibc versions >= 2.28
- Unbreak the futex-wake benchmark which was reduced to 0 test threads
due to the conversion to cpumaps
- Initialize sigaction structs before invoking sys_sigactio()
- Plug the mapfile memory leak in perf jevents
- Fix off by one relative directory includes
- Fix an undefined string comparison in perf diff
-----BEGIN PGP SIGNATURE-----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=uJcr
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A pile of perf fixes:
Kernel side:
- AMD uncore driver: Replace the open coded sanity check with the
core variant, which provides the correct error code and also leaves
a hint in dmesg
Tooling:
- Fix the stdio input handling with glibc versions >= 2.28
- Unbreak the futex-wake benchmark which was reduced to 0 test
threads due to the conversion to cpumaps
- Initialize sigaction structs before invoking sys_sigactio()
- Plug the mapfile memory leak in perf jevents
- Fix off by one relative directory includes
- Fix an undefined string comparison in perf diff"
* tag 'perf-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flag
tools: Fix off-by 1 relative directory includes
perf jevents: Fix leak of mapfile memory
perf bench: Clear struct sigaction before sigaction() syscall
perf bench futex-wake: Restore thread count default to online CPU count
perf top: Fix stdio interface input handling with glibc 2.28+
perf diff: Fix undefined string comparision spotted by clang's -Wstring-compare
perf symbols: Don't try to find a vmlinux file when looking for kernel modules
perf bench: Share some global variables to fix build with gcc 10
perf parse-events: Use asprintf() instead of strncpy() to read tracepoint files
perf env: Do not return pointers to local variables
perf tests bp_account: Make global variable static
Extend RED testsuite to cover the new nodrop mode of RED-ECN. This test is
really similar to ECN test, diverging only in the last step, where UDP
traffic should go to backlog instead of being dropped. Thus extract a
common helper, ecn_test_common(), make do_ecn_test() into a relatively
simple wrapper, and add another one, do_ecn_nodrop_test().
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a handful of tests for creating RED with different flags.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-03-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 86 non-merge commits during the last 12 day(s) which contain
a total of 107 files changed, 5771 insertions(+), 1700 deletions(-).
The main changes are:
1) Add modify_return attach type which allows to attach to a function via
BPF trampoline and is run after the fentry and before the fexit programs
and can pass a return code to the original caller, from KP Singh.
2) Generalize BPF's kallsyms handling and add BPF trampoline and dispatcher
objects to be visible in /proc/kallsyms so they can be annotated in
stack traces, from Jiri Olsa.
3) Extend BPF sockmap to allow for UDP next to existing TCP support in order
in order to enable this for BPF based socket dispatch, from Lorenz Bauer.
4) Introduce a new bpftool 'prog profile' command which attaches to existing
BPF programs via fentry and fexit hooks and reads out hardware counters
during that period, from Song Liu. Example usage:
bpftool prog profile id 337 duration 3 cycles instructions llc_misses
4228 run_cnt
3403698 cycles (84.08%)
3525294 instructions # 1.04 insn per cycle (84.05%)
13 llc_misses # 3.69 LLC misses per million isns (83.50%)
5) Batch of improvements to libbpf, bpftool and BPF selftests. Also addition
of a new bpf_link abstraction to keep in particular BPF tracing programs
attached even when the applicaion owning them exits, from Andrii Nakryiko.
6) New bpf_get_current_pid_tgid() helper for tracing to perform PID filtering
and which returns the PID as seen by the init namespace, from Carlos Neira.
7) Refactor of RISC-V JIT code to move out common pieces and addition of a
new RV32G BPF JIT compiler, from Luke Nelson.
8) Add gso_size context member to __sk_buff in order to be able to know whether
a given skb is GSO or not, from Willem de Bruijn.
9) Add a new bpf_xdp_output() helper which reuses XDP's existing perf RB output
implementation but can be called from tracepoint programs, from Eelco Chaudron.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add vmlinux.h generation to selftest/bpf's Makefile. Use it from newly added
test_vmlinux to trace nanosleep syscall using 5 different types of programs:
- tracepoint;
- raw tracepoint;
- raw tracepoint w/ direct memory reads (tp_btf);
- kprobe;
- fentry.
These programs are realistic variants of real-life tracing programs,
excercising vmlinux.h's usage with tracing applications.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200313172336.1879637-5-andriin@fb.com
Syscall raw tracepoints have struct pt_regs pointer as tracepoint's first
argument. After that, reading any of pt_regs fields requires bpf_probe_read(),
even for tp_btf programs. Due to that, PT_REGS_PARMx macros are not usable as
is. This patch adds CO-RE variants of those macros that use BPF_CORE_READ() to
read necessary fields. This provides relocatable architecture-agnostic pt_regs
field accesses.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200313172336.1879637-4-andriin@fb.com
When finding target type candidates, ignore forward declarations, functions,
and other named types of incompatible kind. Not doing this can cause false
errors. See [0] for one such case (due to struct pt_regs forward
declaration).
[0] https://github.com/iovisor/bcc/pull/2806#issuecomment-598543645
Fixes: ddc7c30426 ("libbpf: implement BPF CO-RE offset relocation algorithm")
Reported-by: Wenbo Zhang <ethercflow@gmail.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200313172336.1879637-3-andriin@fb.com
printf() doesn't seem to honor using overwritten stdout/stderr (as part of
stdio hijacking), so ensure all "standard" invocations of printf() do
fprintf(stdout, ...) instead.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200313172336.1879637-2-andriin@fb.com
Andrii Nakryiko reports that sockmap_listen test suite is frequently
failing due to accept() calls erroring out with EAGAIN:
./test_progs:connect_accept_thread:733: accept: Resource temporarily unavailable
connect_accept_thread:FAIL:733
This is because we are using a non-blocking listening TCP socket to
accept() connections without polling on the socket.
While at first switching to blocking mode seems like the right thing to do,
this could lead to test process blocking indefinitely in face of a network
issue, like loopback interface being down, as Andrii pointed out.
Hence, stick to non-blocking mode for TCP listening sockets but with
polling for incoming connection for a limited time before giving up.
Apply this approach to all socket I/O calls in the test suite that we
expect to block indefinitely, that is accept() for TCP and recv() for UDP.
Fixes: 44d28be2b8 ("selftests/bpf: Tests for sockmap/sockhash holding listening sockets")
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200313161049.677700-1-jakub@cloudflare.com
Commit fe4eb069ed ("bpftool: Use linux/types.h from source tree for
profiler build") added a build dependency on tools/testing/selftests/bpf
to tools/bpf/bpftool. This is suboptimal with respect to a possible
stand-alone build of bpftool.
Fix this by moving tools/testing/selftests/bpf/include/uapi/linux/types.h
to tools/include/uapi/linux/types.h.
This requires an adjustment in the include search path order for the
tests in tools/testing/selftests/bpf so that tools/include/linux/types.h
is selected when building host binaries and
tools/include/uapi/linux/types.h is selected when building bpf binaries.
Verified by compiling bpftool and the bpf selftests on x86_64 with this
change.
Fixes: fe4eb069ed ("bpftool: Use linux/types.h from source tree for profiler build")
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200313113105.6918-1-tklauser@distanz.ch
nanosleep syscall expects pointer to struct timespec, not nanoseconds
directly. Current implementation fulfills its purpose of invoking nanosleep
syscall, but doesn't really provide sleeping capabilities, which can cause
flakiness for tests relying on usleep() to wait for something.
Fixes: ec12a57b822c ("selftests/bpf: Guarantee that useep() calls nanosleep() syscall")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200313061837.3685572-1-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Switch to non-blocking accept and wait for server thread to exit before
proceeding. I noticed that sometimes tcp_rtt server thread failure would
"spill over" into other tests (that would run after tcp_rtt), probably just
because server thread exits much later and tcp_rtt doesn't wait for it.
v1->v2:
- add usleep() while waiting on initial non-blocking accept() (Stanislav);
Fixes: 8a03222f50 ("selftests/bpf: test_progs: fix client/server race in tcp_rtt")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20200311222749.458015-1-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some implementations of C runtime library won't call nanosleep() syscall from
usleep(). But a bunch of kprobe/tracepoint selftests rely on nanosleep being
called to trigger them. To make this more reliable, "override" usleep
implementation and call nanosleep explicitly.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Julia Kartseva <hex@fb.com>
Link: https://lore.kernel.org/bpf/20200311185345.3874602-1-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In commit 4a3d6c6a6e ("libbpf: Reduce log level for custom section
names"), log level for messages for libbpf_attach_type_by_name() and
libbpf_prog_type_by_name() was downgraded from "info" to "debug". The
latter function, in particular, is used by bpftool when attempting to
load programs, and this change caused bpftool to exit with no hint or
error message when it fails to detect the type of the program to load
(unless "-d" option was provided).
To help users understand why bpftool fails to load the program, let's do
a second run of the function with log level in "debug" mode in case of
failure.
Before:
# bpftool prog load sample_ret0.o /sys/fs/bpf/sample_ret0
# echo $?
255
Or really verbose with -d flag:
# bpftool -d prog load sample_ret0.o /sys/fs/bpf/sample_ret0
libbpf: loading sample_ret0.o
libbpf: section(1) .strtab, size 134, link 0, flags 0, type=3
libbpf: skip section(1) .strtab
libbpf: section(2) .text, size 16, link 0, flags 6, type=1
libbpf: found program .text
libbpf: section(3) .debug_abbrev, size 55, link 0, flags 0, type=1
libbpf: skip section(3) .debug_abbrev
libbpf: section(4) .debug_info, size 75, link 0, flags 0, type=1
libbpf: skip section(4) .debug_info
libbpf: section(5) .rel.debug_info, size 32, link 14, flags 0, type=9
libbpf: skip relo .rel.debug_info(5) for section(4)
libbpf: section(6) .debug_str, size 150, link 0, flags 30, type=1
libbpf: skip section(6) .debug_str
libbpf: section(7) .BTF, size 155, link 0, flags 0, type=1
libbpf: section(8) .BTF.ext, size 80, link 0, flags 0, type=1
libbpf: section(9) .rel.BTF.ext, size 32, link 14, flags 0, type=9
libbpf: skip relo .rel.BTF.ext(9) for section(8)
libbpf: section(10) .debug_frame, size 40, link 0, flags 0, type=1
libbpf: skip section(10) .debug_frame
libbpf: section(11) .rel.debug_frame, size 16, link 14, flags 0, type=9
libbpf: skip relo .rel.debug_frame(11) for section(10)
libbpf: section(12) .debug_line, size 74, link 0, flags 0, type=1
libbpf: skip section(12) .debug_line
libbpf: section(13) .rel.debug_line, size 16, link 14, flags 0, type=9
libbpf: skip relo .rel.debug_line(13) for section(12)
libbpf: section(14) .symtab, size 96, link 1, flags 0, type=2
libbpf: looking for externs among 4 symbols...
libbpf: collected 0 externs total
libbpf: failed to guess program type from ELF section '.text'
libbpf: supported section(type) names are: socket sk_reuseport kprobe/ [...]
After:
# bpftool prog load sample_ret0.o /sys/fs/bpf/sample_ret0
libbpf: failed to guess program type from ELF section '.text'
libbpf: supported section(type) names are: socket sk_reuseport kprobe/ [...]
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200311021205.9755-1-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Update custom install rule to install all generated test programs. This
fixes android/ion tests to be installed correctly.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
ionmap_test compile rule is missing ipcsocket.c dependency. Add it to
fix the following compile errors:
..android/ion/ionutils.c:221: undefined reference to `sendtosocket'
..android/ion/ionutils.c:243: undefined reference to `receivefromsocket'
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
make kselftest-all O=objdir builds create generated objects in objdir.
This clutters the top level directory with kselftest objects. Fix it
to create sub-directory under objdir for kselftest objects.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The seccomp selftest reported the wrong test counts since it was using
slightly the wrong API for defining text fixtures. Adjust the API usage.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There are two spelling mistakes in error messages. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If the shell test directory isn't present the exit code will be 255 but
with no error messages printed. Add an error message.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200313005602.45236-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-03-12
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 8 day(s) which contain
a total of 12 files changed, 161 insertions(+), 15 deletions(-).
The main changes are:
1) Andrii fixed two bugs in cgroup-bpf.
2) John fixed sockmap.
3) Luke fixed x32 jit.
4) Martin fixed two issues in struct_ops.
5) Yonghong fixed bpf_send_signal.
6) Yoshiki fixed BTF enum.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce new helper that reuses existing xdp perf_event output
implementation, but can be called from raw_tracepoint programs
that receive 'struct xdp_buff *' as a tracepoint argument.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/158348514556.2239.11050972434793741444.stgit@xdp-tutorial
New bpf helper bpf_get_ns_current_pid_tgid,
This helper will return pid and tgid from current task
which namespace matches dev_t and inode number provided,
this will allows us to instrument a process inside a container.
Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200304204157.58695-3-cneirabustos@gmail.com
Minor fixes for bash completion: addition of program name completion for
two subcommands, and correction for program test-runs and map pinning.
The completion for the following commands is fixed or improved:
# bpftool prog run [TAB]
# bpftool prog pin [TAB]
# bpftool map pin [TAB]
# bpftool net attach xdp name [TAB]
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200312184608.12050-3-quentin@isovalent.com
Documentation and interactive help for bpftool have always explained
that the regular handles for programs (id|name|tag|pinned) and maps
(id|name|pinned) can be passed to the utility when attempting to pin
objects (bpftool prog pin PROG / bpftool map pin MAP).
THIS IS A LIE!! The tool actually accepts only ids, as the parsing is
done in do_pin_any() in common.c instead of reusing the parsing
functions that have long been generic for program and map handles.
Instead of fixing the doc, fix the code. It is trivial to reuse the
generic parsing, and to simplify do_pin_any() in the process.
Do not accept to pin multiple objects at the same time with
prog_parse_fds() or map_parse_fds() (this would require a more complex
syntax for passing multiple sysfs paths and validating that they
correspond to the number of e.g. programs we find for a given name or
tag).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200312184608.12050-2-quentin@isovalent.com
Pull networking fixes from David Miller:
"It looks like a decent sized set of fixes, but a lot of these are one
liner off-by-one and similar type changes:
1) Fix netlink header pointer to calcular bad attribute offset
reported to user. From Pablo Neira Ayuso.
2) Don't double clear PHY interrupts when ->did_interrupt is set,
from Heiner Kallweit.
3) Add missing validation of various (devlink, nl802154, fib, etc.)
attributes, from Jakub Kicinski.
4) Missing *pos increments in various netfilter seq_next ops, from
Vasily Averin.
5) Missing break in of_mdiobus_register() loop, from Dajun Jin.
6) Don't double bump tx_dropped in veth driver, from Jiang Lidong.
7) Work around FMAN erratum A050385, from Madalin Bucur.
8) Make sure ARP header is pulled early enough in bonding driver,
from Eric Dumazet.
9) Do a cond_resched() during multicast processing of ipvlan and
macvlan, from Mahesh Bandewar.
10) Don't attach cgroups to unrelated sockets when in interrupt
context, from Shakeel Butt.
11) Fix tpacket ring state management when encountering unknown GSO
types. From Willem de Bruijn.
12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend()
only in the suspend context. From Heiner Kallweit"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
net: systemport: fix index check to avoid an array out of bounds access
tc-testing: add ETS scheduler to tdc build configuration
net: phy: fix MDIO bus PM PHY resuming
net: hns3: clear port base VLAN when unload PF
net: hns3: fix RMW issue for VLAN filter switch
net: hns3: fix VF VLAN table entries inconsistent issue
net: hns3: fix "tc qdisc del" failed issue
taprio: Fix sending packets without dequeueing them
net: mvmdio: avoid error message for optional IRQ
net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register
net: memcg: fix lockdep splat in inet_csk_accept()
s390/qeth: implement smarter resizing of the RX buffer pool
s390/qeth: refactor buffer pool code
s390/qeth: use page pointers to manage RX buffer pool
seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number
net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed
net/packet: tpacket_rcv: do not increment ring index on drop
sxgbe: Fix off by one in samsung driver strncpy size arg
net: caif: Add lockdep expression to RCU traversal primitive
MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer
...
Needs for application BTF being present differs between user-space libbpf needs and kernel
needs. Currently, BTF is mandatory only in kernel only when BPF application is
using STRUCT_OPS. While libbpf itself relies more heavily on presense of BTF:
- for BTF-defined maps;
- for Kconfig externs;
- for STRUCT_OPS as well.
Thus, checks for presence and validness of bpf_object's BPF needs to be
performed separately, which is patch does.
Fixes: 5327644614 ("libbpf: Relax check whether BTF is mandatory")
Reported-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Cc: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200312185033.736911-1-andriin@fb.com
bpftool-prog-profile requires clang to generate BTF for global variables.
When compared with older clang, skip this command. This is achieved by
adding a new feature, clang-bpf-global-var, to tools/build/feature.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200312182332.3953408-2-songliubraving@fb.com
add CONFIG_NET_SCH_ETS to 'config', otherwise test suites using this file
to perform a full tdc run will encounter the following warning:
ok 645 e90e - Add ETS qdisc using bands # skipped - "-----> teardown stage" did not complete successfully
Fixes: 82c664b69c ("selftests: qdiscs: Add test coverage for ETS Qdisc")
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
xas_for_each_marked() is using entry == NULL as a termination condition
of the iteration. When xas_for_each_marked() is used protected only by
RCU, this can however race with xas_store(xas, NULL) in the following
way:
TASK1 TASK2
page_cache_delete() find_get_pages_range_tag()
xas_for_each_marked()
xas_find_marked()
off = xas_find_chunk()
xas_store(&xas, NULL)
xas_init_marks(&xas);
...
rcu_assign_pointer(*slot, NULL);
entry = xa_entry(off);
And thus xas_for_each_marked() terminates prematurely possibly leading
to missed entries in the iteration (translating to missing writeback of
some pages or a similar problem).
If we find a NULL entry that has been marked, skip it (unless we're trying
to allocate an entry).
Reported-by: Jan Kara <jack@suse.cz>
CC: stable@vger.kernel.org
Fixes: ef8e5717db ("page cache: Convert delete_batch to XArray")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
This commit adds a test to check if we can fully utilize 4-tuples for
connect() when all ephemeral ports are exhausted.
The test program changes the local port range to use only one port and binds
two sockets with or without SO_REUSEADDR and SO_REUSEPORT, and with the same
EUID or with different EUIDs, then do listen().
We should be able to bind only one socket having both SO_REUSEADDR and
SO_REUSEPORT per EUID, which restriction is to prevent unintentional
listen().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
When compiling bpftool on a system where the /usr/include/asm symlink
doesn't exist (e.g. on an Ubuntu system without gcc-multilib installed),
the build fails with:
CLANG skeleton/profiler.bpf.o
In file included from skeleton/profiler.bpf.c:4:
In file included from /usr/include/linux/bpf.h:11:
/usr/include/linux/types.h:5:10: fatal error: 'asm/types.h' file not found
#include <asm/types.h>
^~~~~~~~~~~~~
1 error generated.
make: *** [Makefile:123: skeleton/profiler.bpf.o] Error 1
This indicates that the build is using linux/types.h from system headers
instead of source tree headers.
To fix this, adjust the clang search path to include the necessary
headers from tools/testing/selftests/bpf/include/uapi and
tools/include/uapi. Also use __bitwise__ instead of __bitwise in
skeleton/profiler.h to avoid clashing with the definition in
tools/testing/selftests/bpf/include/uapi/linux/types.h.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200312130330.32239-1-tklauser@distanz.ch
Correct maxnode parameter value passed to mbind() syscall to be the
amount of node mask bits to analyze plus 1. Dynamically allocate node
mask memory depending on the index of node of cpu being profiled.
Fixes: c44a8b44ca ("perf record: Bind the AIO user space buffers to nodes")
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/c7ea8ffe-1357-bf9e-3a89-1da1d8e9b75b@linux.intel.com
[ Remove leftover nr_bits + 1 comment in mbind() call ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since common_callchain has been added to the argument array, we need to
reflect it in perl-based scripts, because otherwise the following args
would be shifted and thus incorrect. E.g. rw-by-pid and calculation of
read and written bytes:
Before:
read counts by pid:
pid comm # reads bytes_requested bytes_read
------ -------------------- ----------- ---------- ----------
19301 dd 4 424510450039736 0
After:
read counts by pid:
pid comm # reads bytes_requested bytes_read
------ -------------------- ----------- ---------- ----------
19301 dd 4 9536 4341
Committer testing:
To see before after first do:
# perf script record rw-by-pid
^C
Now you'll have a perf.data file to report on, then do before and after
using:
# perf script report rw-by-pid
Anbd notice the bytes_request/bytes_read, as above.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Benjamin Salon <bsalon@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 20200311132836.12693-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Libbpf compiles and runs subset of selftests on each PR in its Github mirror
repository. To allow still building up-to-date selftests against outdated
kernel images, add back BPF_F_CURRENT_CPU definitions back.
N.B. BCC's runqslower version ([0]) doesn't need BPF_F_CURRENT_CPU due to use of
locally checked in vmlinux.h, generated against kernel with 1aae4bdd78 ("bpf:
Switch BPF UAPI #define constants used from BPF program side to enums")
applied.
[0] https://github.com/iovisor/bcc/pull/2809
Fixes: 367d82f17e (" tools/runqslower: Drop copy/pasted BPF_F_CURRENT_CPU definiton")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200311043010.530620-1-andriin@fb.com
Make it easy for people looking in intel-pt.txt to find the new file.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200311122034.3697-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add references to Intel PT man page in man pages of associated tools.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200311122034.3697-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the Intel PT documentation into a man page.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200311122034.3697-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the man page dates reflect the date the man pages were built.
This patch adjusts the date so that the date is when then man page
last had a commit against it. The date is generated using 'git log'.
Committer testing:
$ git log -1 --pretty="format:%cd" --date=short tools/perf/Documentation/perf-top.txt
2020-01-14
Before:
rm -rf /tmp/build/perf
mkdir -p /tmp/build/perf
make -C tools/perf O=/tmp/build/perf/ install
$ date
Wed 11 Mar 2020 10:21:19 AM -03
$ man perf-top | tail -1
perf 03/11/2020 PERF-TOP(1)
$
After:
rm -rf /tmp/build/perf
mkdir -p /tmp/build/perf
make -C tools/perf O=/tmp/build/perf/ install
$ date
$ date
Wed 11 Mar 2020 10:24:06 AM -03
$ man perf-top | tail -1
perf 2020-01-14 PERF-TOP(1)
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Mukesh Ojha <mojha@codeaurora.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200311052110.23132-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The variable 'offset' in function cs_etm__sample() is u64 type, it's not
appropriate to check it with 'while (offset > 0)'; this patch changes to
'while (offset)'.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200219021811.20067-6-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If an instruction range packet can generate multiple instruction
samples, these samples share the same last branches; it's not necessary
to copy the same last branches repeatedly for these samples within the
same packet.
This patch moves out the last branches copying from function
cs_etm__synth_instruction_sample(), and execute it prior to generating
instruction samples.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200219021811.20067-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When 'etm->instructions_sample_period' is less than
'tidq->period_instructions', the function cs_etm__sample() cannot handle
this case properly with its logic.
Let's see below flow as an example:
- If we set itrace option '--itrace=i4', then function cs_etm__sample()
has variables with initialized values:
tidq->period_instructions = 0
etm->instructions_sample_period = 4
- When the first packet is coming:
packet->instr_count = 10; the number of instructions executed in this
packet is 10, thus update period_instructions as below:
tidq->period_instructions = 0 + 10 = 10
instrs_over = 10 - 4 = 6
offset = 10 - 6 - 1 = 3
tidq->period_instructions = instrs_over = 6
- When the second packet is coming:
packet->instr_count = 10; in the second pass, assume 10 instructions
in the trace sample again:
tidq->period_instructions = 6 + 10 = 16
instrs_over = 16 - 4 = 12
offset = 10 - 12 - 1 = -3 -> the negative value
tidq->period_instructions = instrs_over = 12
So after handle these two packets, there have below issues:
The first issue is that cs_etm__instr_addr() returns the address within
the current trace sample of the instruction related to offset, so the
offset is supposed to be always unsigned value. But in fact, function
cs_etm__sample() might calculate a negative offset value (in handling
the second packet, the offset is -3) and pass to cs_etm__instr_addr()
with u64 type with a big positive integer.
The second issue is it only synthesizes 2 samples for sample period = 4.
In theory, every packet has 10 instructions so the two packets have
total 20 instructions, 20 instructions should generate 5 samples
(4 x 5 = 20). This is because cs_etm__sample() only calls once
cs_etm__synth_instruction_sample() to generate instruction sample per
range packet.
This patch fixes the logic in function cs_etm__sample(); the basic
idea for handling coming packet is:
- To synthesize the first instruction sample, it combines the left
instructions from the previous packet and the head of the new
packet; then generate continuous samples with sample period;
- At the tail of the new packet, if it has the rest instructions,
these instructions will be left for the sequential sample.
Suggested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200219021811.20067-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Every time synthesize instruction sample, the last branch recording will
be reset. This is fine if the instruction period is big enough, for
example if use the option '--itrace=i100000', the last branch array is
reset for every sample with 100000 instructions per period; before
generate the next instruction sample, there has the sufficient packets
coming to fill the last branch array.
On the other hand, if set a very small period, the packets will be
significantly reduced between two continuous instruction samples, thus
the last branch array is almost empty for new instruction sample by
frequently resetting.
To allow the last branches to work properly for any instruction periods,
this patch avoids to reset the last branch for every instruction sample
and only reset it when flush the trace data. The last branches will be
reset only for two cases, one is for trace starting, another case is for
discontinuous trace; other cases can keep recording last branches for
continuous instruction samples.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200219021811.20067-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If use option '--itrace=iNNN' with Arm CoreSight trace data, perf tool
fails inject instruction samples; the root cause is the packets are only
swapped for branch samples and last branches but not for instruction
samples, so the new coming packets cannot be properly handled for only
synthesizing instruction samples.
To fix this issue, this patch refactors the code with a new function
cs_etm__packet_swap() which is used to swap packets and adds the
condition for instruction samples.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200219021811.20067-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And add the '/' to avoid looking at things like "/system/libsomething",
when all we want to know if it is like "/system/lib/something", i.e. if
it is in that system library dir.
Using strstarts() avoids off-by-one errors like recently fixed in this
file.
Since this adds the '/' I separated this patch, another patch will make
this consistent by removing other strncmp(str, prefix, manually
calculated prefix length) usage.
Reported-by: Dominik Czarnota <dominik.b.czarnota@gmail.com>
Acked-by: Dominik Czarnota <dominik.b.czarnota@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: Link: http://lore.kernel.org/lkml/CABEVAa0_q-uC0vrrqpkqRHy_9RLOSXOJxizMLm1n5faHRy2AeA@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes an off-by-one error in strncpy size argument in
tools/perf/util/map.c. The issue is that in:
strncmp(filename, "/system/lib/", 11)
the passed string literal: "/system/lib/" has 12 bytes (without the NULL
byte) and the passed size argument is 11. As a result, the logic won't
match the ending "/" byte and will pass filepaths that are stored in
other directories e.g. "/system/libmalicious/bin" or just
"/system/libmalicious".
This functionality seems to be present only on Android. I assume the
/system/ directory is only writable by the root user, so I don't think
this bug has much (or any) security impact.
Fixes: eca8183699 ("perf tools: Add automatic remapping of Android libraries")
Signed-off-by: disconnect3d <dominik.b.czarnota@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Keeping <john@metanate.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Lentine <mlentine@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200309104855.3775-1-dominik.b.czarnota@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some metric groups have metric constraints. A metric group can be
scheduled as a group only when some constraints are applied. For
example, Page_Walks_Utilization has a metric constraint,
"NO_NMI_WATCHDOG".
When NMI watchdog is disabled, the metric group can be scheduled as a
group. Otherwise, splitting the metric group into standalone metrics.
Add a new function, metricgroup__has_constraint(), to check whether all
constraints are applied. If not, splitting the metric group into
standalone metrics.
Currently, only one constraint, "NO_NMI_WATCHDOG", is checked. Print a
warning for the metric group with the constraint, when NMI WATCHDOG is
enabled.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/1582581564-184429-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The NMI watchdog status is required for metric group constraint
examination. Factor out sysctl__nmi_watchdog_enabled() to retrieve the
NMI watchdog status.
Users may count more than one metric group each time. If so, the NMI
watchdog status may be retrieved several times. To reduce the overhead,
cache the NMI watchdog status.
Replace the NMI watchdog status checking in print_footer() by
sysctl__nmi_watchdog_enabled().
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/1582581564-184429-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out metricgroup__add_metric_weak_group() which add metrics into a
weak group. The change can improve code readability. Because following
patch will introduce a function which add standalone metrics.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/1582581564-184429-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A new field "MetricConstraint" is introduced in JSON event list.
Extend jevents to parse the field and save the value in
metric_constraint.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/1582581564-184429-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for new deflate counters:
- Counter 247: cycles CPU spent obtaining access to Deflate unit
- Counter 252: cycles CPU is using Deflate unit
- Counter 264: Increments by one for every DEFLATE CONVERSION CALL
instruction executed.
- Counter 265: Increments by one for every DEFLATE CONVERSION CALL
instruction executed that ended in Condition Codes
0, 1 or 2.
Also adjust the some crypto counter description to latest documentation.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200310142937.32045-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This cpupower update for Linux 5.6-rc6 consists of a fix from
Mike Gilbert for build failures when -fno-common is enabled.
-fno-common will be default in gcc v10.
-----BEGIN PGP SIGNATURE-----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=WEti
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility fix for v5.6 from Shuah Khan:
"This cpupower update for Linux 5.6-rc6 consists of a fix from
Mike Gilbert for build failures when -fno-common is enabled.
-fno-common will be default in gcc v10."
* tag 'linux-cpupower-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: avoid multiple definition with gcc -fno-common
allows to run the tests with fixed receive buffer by passing
"-R <value>" to mptcp_connect.sh.
While at it, add a default 10 second poll timeout so the "-t"
becomes optional -- this makes mptcp_connect simpler to use
during manual testing.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
It would be nice to print the block percents with colors.
This patch supports the 'Sampled Cycles%' and 'Avg Cycles%' printed in
colors.
For example,
perf record -b ...
perf report --total-cycles or perf report --total-cycles --stdio
percent > 5%, colored in red
percent > 0.5%, colored in green
percent < 0.5%, default color
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200202141655.32053-5-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we use a predefined array to set the block info output
formats, it's fixed and inflexible.
This patch adds two parameters "block_hpps" and "nr_hpps" in
block_info__create_report and other static functions, in order to let
user decide which columns to report and with specified report ordering.
It should be more flexible.
Buffers will be allocated to contain the new fmts, of course, we need to
release them before perf exits.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200202141655.32053-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf diff' uses block_pair_cmp() to compare two blocks. But
block_info__cmp() has the similar functionality and it's a bit more
complete.
This patch removes block_pair_cmp() and uses __block_info__cmp()
instead. __block_info__cmp() is wrapped by block_info__cmp() and it
doesn't receives a perf_hpp_fmt parameter.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200202141655.32053-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 6041441870 ("perf block: Cleanup and refactor block info
functions") introduces block_info__cmp(), which compares two blocks.
But the issues are:
1. It should return the strcmp cmp value only if it's not 0.
2. When symbol names are matched, we need to compare the addresses
of blocks further. But it wrongly uses the symbol addresses for
comparison.
3. If the syms are both NULL, we can't consider these two blocks are
matched.
This patch fixes above 3 issues.
Fixes: 6041441870 ("perf block: Cleanup and refactor block info functions")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200202141655.32053-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match the error value of the expr__find_other function, so all
exported expr functions return the same values:
0 on success, -1 on error.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200228093616.67125-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we have a flex parser we don't need to update the parsed string
pointer, so the interface can just be passed the pointer to the
expression instead of a pointer to pointer.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200228093616.67125-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have metrics that define more than 15 variables, like
Branch_Misprediction_Cost. Increasing the allowed variables count to 20.
As Andy pointed out, we can't go too high in here, because some of the
code has O(n^2) complexity (already_seen) and we might want to do some
other changes (like using hash tables) before increasing the maximum
even more.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200228093616.67125-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding expr flex code instead of the manual parser code. So it's easily
extensible in upcoming changes.
The new flex code is in flex.l object and gets compiled like all the
other flexers we use. It's defined as flex reentrant parser.
It's used by both expr__parse and expr__find_other interfaces by
separating the starting point.
There's no intended change of functionality ;-) the test expr is
passing.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200228093616.67125-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add generic expr code into new expr.c object.
The expr.c object will be mainly used in following change that will get
rid of the manual flex code,
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200228093616.67125-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf.data may be generated by a newer version of perf tool, which
support new input bits in attr, e.g. new bit for branch_sample_type.
The perf.data may be parsed by an older version of perf tool later. The
old perf tool may parse the perf.data incorrectly. There is no warning
message for this case.
Current perf header never check for unknown input bits in attr.
When read the event desc from header, check the stored event attr. The
reserved bits, sample type, read format and branch sample type will be
checked.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lkml.kernel.org/r/20200228163011.19358-4-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A new branch sample type PERF_SAMPLE_BRANCH_HW_INDEX has been introduced
in latest kernel.
Enable HW_INDEX by default in LBR call stack mode.
If kernel doesn't support the sample type, switching it off.
Add HW_INDEX in attr_fprintf as well. User can check whether the branch
sample type is set via debug information or header.
Committer testing:
First collect some samples with LBR callchains, system wide, for a few
seconds:
# perf record --call-graph lbr -a sleep 5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.625 MB perf.data (224 samples) ]
#
Now lets use 'perf evlist -v' to look at the branch_sample_type:
# perf evlist -v
cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: USER|CALL_STACK|NO_FLAGS|NO_CYCLES|HW_INDEX
#
So the machine has the kernel feature, and it was correctly added to
perf_event_attr.branch_sample_type, for the default 'cycles' event.
If we do it in another machine, where the kernel lacks the HW_INDEX
feature, we get:
# perf record --call-graph lbr -a sleep 2s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.690 MB perf.data (499 samples) ]
# perf evlist -v
cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: USER|CALL_STACK|NO_FLAGS|NO_CYCLES
#
No HW_INDEX in attr.branch_sample_type.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200228163011.19358-3-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The low level index of raw branch records for the most recent branch can
be recorded in a sample with PERF_SAMPLE_BRANCH_HW_INDEX
branch_sample_type. Extend struct branch_stack to support it.
However, if the PERF_SAMPLE_BRANCH_HW_INDEX is not applied, only nr and
entries[] will be output by kernel. The pointer of entries[] could be
wrong, since the output format is different with new struct
branch_stack. Add a variable no_hw_idx in struct perf_sample to
indicate whether the hw_idx is output. Add get_branch_entry() to return
corresponding pointer of entries[0].
To make dummy branch sample consistent as new branch sample, add hw_idx
in struct dummy_branch_stack for cs-etm and intel-pt.
Apply the new struct branch_stack for synthetic events as well.
Extend test case sample-parsing to support new struct branch_stack.
Committer notes:
Renamed get_branch_entries() to perf_sample__branch_entries() to have
proper namespacing and pave the way for this to be moved to libperf,
eventually.
Add 'static' to that inline as it is in a header.
Add 'hw_idx' to 'struct dummy_branch_stack' in cs-etm.c to fix the build
on arm64.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200228163011.19358-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Make the default option oldconfig instead of randconfig
(one too many times I lost my config because I left the build type out)
- Add timeout to ssh sync to sync before reboot (prevents test hangs)
- A couple of spelling fix patches
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXmakcxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhLKAP9eEZxg0HzIXo3mn9ECcpLaJIKgXGCY
Q55z1dN56qliZQD+KcRAB0kA2oxP0tBsJyTrizpJnkldkNrbRd4uJZo/4gA=
=sn+K
-----END PGP SIGNATURE-----
Merge tag 'ktest-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull Ktest fixes and clean ups from Steven Rostedt:
- Make the default option oldconfig instead of randconfig (one too many
times I lost my config because I left the build type out)
- Add timeout to ssh sync to sync before reboot (prevents test hangs)
- A couple of spelling fix patches
* tag 'ktest-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Fix typos in ktest.pl
ktest: Add timeout for ssh sync testing
ktest: Make default build option oldconfig not randconfig
ktest: Fix some typos in sample.conf
_bpftool_get_map_names => _bpftool_get_prog_names for prog-attach|detach.
Fixes: 99f9863a0c ("bpftool: Match maps by name")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200309173218.2739965-5-songliubraving@fb.com
With fentry/fexit programs, it is possible to profile BPF program with
hardware counters. Introduce bpftool "prog profile", which measures key
metrics of a BPF program.
bpftool prog profile command creates per-cpu perf events. Then it attaches
fentry/fexit programs to the target BPF program. The fentry program saves
perf event value to a map. The fexit program reads the perf event again,
and calculates the difference, which is the instructions/cycles used by
the target program.
Example input and output:
./bpftool prog profile id 337 duration 3 cycles instructions llc_misses
4228 run_cnt
3403698 cycles (84.08%)
3525294 instructions # 1.04 insn per cycle (84.05%)
13 llc_misses # 3.69 LLC misses per million isns (83.50%)
This command measures cycles and instructions for BPF program with id
337 for 3 seconds. The program has triggered 4228 times. The rest of the
output is similar to perf-stat. In this example, the counters were only
counting ~84% of the time because of time multiplexing of perf counters.
Note that, this approach measures cycles and instructions in very small
increments. So the fentry/fexit programs introduce noticeable errors to
the measurement results.
The fentry/fexit programs are generated with BPF skeletons. Therefore, we
build bpftool twice. The first time _bpftool is built without skeletons.
Then, _bpftool is used to generate the skeletons. The second time, bpftool
is built with skeletons.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200309173218.2739965-2-songliubraving@fb.com
Remove the guard that disables UDP tests now that sockmap
has support for them.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200309111243.6982-12-lmb@cloudflare.com
Expand the TCP sockmap test suite to also check UDP sockets.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200309111243.6982-11-lmb@cloudflare.com
Most tests for TCP sockmap can be adapted to UDP sockmap if the
listen call is skipped. Rename listen_loopback, etc. to socket_loopback
and skip listen() for SOCK_DGRAM.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200309111243.6982-10-lmb@cloudflare.com
This patch fixes multipe spelling typo found in ktest.pl.
Link: http://lkml.kernel.org/r/20200309115430.57540-1-standby24x7@gmail.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Before rebooting the box, a "ssh sync" is called to the test machine to see
if it is alive or not. But if the test machine is in a partial state, that
ssh may never actually finish, and the ktest test hangs.
Add a 10 second timeout to the sync test, which will fail after 10 seconds
and then cause the test to reboot the test machine.
Cc: stable@vger.kernel.org
Fixes: 6474ace999 ("ktest.pl: Powercycle the box on reboot if no connection can be made")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
For the last time, I screwed up my ktest config file, and the build went
into the default "randconfig", blowing away the .config that I had set up.
The reason for the default randconfig was because when this was first
written, I wanted to do a bunch of randconfigs. But as time progressed,
ktest isn't about randconfig anymore, and because randconfig destroys the
config in the build directory, it's a dangerous default to have. Use
oldconfig as the default.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This patch fixes some spelling typo in sample.conf
Link: http://lkml.kernel.org/r/20190930124925.20250-1-standby24x7@gmail.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Do not depend on dwfl_module_addrsym() because it can fail on user-space
shared libraries.
Actually, same bug was fixed by commit 664fee3dc3 ("perf probe: Do not
use dwfl_module_addrsym if dwarf_diename finds symbol name"), but commit
07d3698578 ("perf probe: Fix wrong address verification) reverted to
get actual symbol address from symtab.
This fixes it again by getting symbol address from DIE, and only if the
DIE has only address range, it uses dwfl_module_addrsym().
Fixes: 07d3698578 ("perf probe: Fix wrong address verification)
Reported-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Alexandre Ghiti <alex@ghiti.fr>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Link: http://lore.kernel.org/lkml/158281812176.476.14164573830975116234.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we put an event with multiple probes, perf-probe fails to delete
with filters. This comes from a failure to list up the event name
because of overwrapping its name.
To fix this issue, skip to list up the event which has same name.
Without this patch:
# perf probe -l \*
probe_perf:map__map_ip (on perf_sample__fprintf_brstackoff:21@
probe_perf:map__map_ip (on perf_sample__fprintf_brstackoff:25@
probe_perf:map__map_ip (on append_inlines:12@util/machine.c in
probe_perf:map__map_ip (on unwind_entry:19@util/machine.c in /
probe_perf:map__map_ip (on map__map_ip@util/map.h in /home/mhi
probe_perf:map__map_ip (on map__map_ip@util/map.h in /home/mhi
# perf probe -d \*
"*" does not hit any event.
Error: Failed to delete events. Reason: No such file or directory (Code: -2)
With it:
# perf probe -d \*
Removed event: probe_perf:map__map_ip
#
Fixes: 72363540c0 ("perf probe: Support multiprobe event")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reported-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/158287666197.16697.7514373548551863562.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ADD_CONFIG_TERM accesses term->weak, however, in get_config_chgs this
value is accessed outside of the list_for_each_entry and references
invalid memory. Add an argument for ADD_CONFIG_TERM for weak and set it
to false in the get_config_chgs case.
This bug was cause by clang's address sanitizer and libfuzzer. It can be
reproduced with a command line of:
perf stat -a -e i/bs,tsc,L2/o
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200307073121.203816-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes an off-by-one error in strncpy size argument in
tools/perf/util/map.c. The issue is that in:
strncmp(filename, "/system/lib/", 11)
the passed string literal: "/system/lib/" has 12 bytes (without the NULL
byte) and the passed size argument is 11. As a result, the logic won't
match the ending "/" byte and will pass filepaths that are stored in
other directories e.g. "/system/libmalicious/bin" or just
"/system/libmalicious".
This functionality seems to be present only on Android. I assume the
/system/ directory is only writable by the root user, so I don't think
this bug has much (or any) security impact.
Fixes: eca8183699 ("perf tools: Add automatic remapping of Android libraries")
Signed-off-by: disconnect3d <dominik.b.czarnota@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Keeping <john@metanate.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Lentine <mlentine@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200309104855.3775-1-dominik.b.czarnota@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXmNvpgAKCRCRxhvAZXjc
ouFvAQDCzfOx1vcEP/nNhYBP2MPuafKclJcoJggC9rSmIvcLiQD/TI+LyHzplD+m
MWSu9NZJ6h6qyjKJivja3/bs8DVEewU=
=4gyS
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2020-03-07' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull thread fixes from Christian Brauner:
"Here are a few hopefully uncontroversial fixes:
- Use RCU_INIT_POINTER() when initializing rcu protected members in
task_struct to fix sparse warnings.
- Add pidfd_fdinfo_test binary to .gitignore file"
* tag 'for-linus-2020-03-07' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
selftests: pidfd: Add pidfd_fdinfo_test in .gitignore
exit: Fix Sparse errors and warnings
fork: Use RCU_INIT_POINTER() instead of rcu_access_pointer()
This Kselftest update for Linux 5.6-rc5 consists of a cleanup patch
to undo changes to global .gitignore that added selftests/lkdtm
objects and add them to a local selftests/lkdtm/.gitignore.
Summary of Linus's comments on local vs. global gitignore scope:
- Keep local gitignore patterns in local files.
- Put only global gitignore patterns in the top-level gitignore file.
Local scope keeps things much better separated. It also incidentally
means that if a directory gets renamed, the gitignore file continues
to work unless in the case of renaming the actual files themselves that
are named in the gitignore.
-----BEGIN PGP SIGNATURE-----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=8sYZ
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
"This consists of a cleanup patch to undo changes to global .gitignore
that added selftests/lkdtm objects and add them to a local
selftests/lkdtm/.gitignore.
Summary of Linus's comments on local vs. global gitignore scope:
- Keep local gitignore patterns in local files.
- Put only global gitignore patterns in the top-level gitignore file.
Local scope keeps things much better separated. It also incidentally
means that if a directory gets renamed, the gitignore file continues
to work unless in the case of renaming the actual files themselves
that are named in the gitignore"
* tag 'linux-kselftest-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftest/lkdtm: Use local .gitignore
When I tried to compile tools/perf from the top directory with the -C
option, the O= option didn't work correctly if I passed a relative path:
$ make O=BUILD -C tools/perf/
make: Entering directory '/home/mhiramat/ksrc/linux/tools/perf'
BUILD: Doing 'make -j8' parallel build
../scripts/Makefile.include:4: *** O=/home/mhiramat/ksrc/linux/tools/perf/BUILD does not exist. Stop.
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/home/mhiramat/ksrc/linux/tools/perf'
The O= directory existence check failed because the check script ran in
the build target directory instead of the directory where I ran the make
command.
To fix that, once change directory to $(PWD) and check O= directory,
since the PWD is set to where the make command runs.
Fixes: c883122acc ("perf tools: Let O= makes handle relative paths")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/158351957799.3363.15269768530697526765.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The existing tests attempt to check that JMP32 JSET ignores the upper
bits in the operand registers. However, the tests missed one such bug in
the x32 JIT that is only uncovered when a previous instruction pollutes
the upper 32 bits of the registers.
This patch adds a new test case that catches the bug by first executing
a 64-bit JSET to pollute the upper 32-bits of the temporary registers,
followed by a 32-bit JSET which should ignore the upper 32 bits.
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200305234416.31597-2-luke.r.nels@gmail.com
This is currently working due to extra include paths in the build.
Committer testing:
$ cd tools/include/uapi/asm/
Before this patch:
$ ls -la ../../arch/x86/include/uapi/asm/errno.h
ls: cannot access '../../arch/x86/include/uapi/asm/errno.h': No such file or directory
$
After this patch;
$ ls -la ../../../arch/x86/include/uapi/asm/errno.h
-rw-rw-r--. 1 acme acme 31 Feb 20 12:42 ../../../arch/x86/include/uapi/asm/errno.h
$
Check that that is still under tools/, i.e. hasn't escaped into the main
kernel sources:
$ cd ../../../arch/x86/include/uapi/asm/
$ pwd
/home/acme/git/perf/tools/arch/x86/include/uapi/asm
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Li <liwei391@huawei.com>
Link: http://lore.kernel.org/lkml/20200306071110.130202-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The memory for global pointer is never freed during normal program
execution, so let's do that in the main function exit as a good
programming practice.
A stray blank line is also removed.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1583406486-154841-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid garbage in sigaction structs used in sigaction() syscalls.
Valgrind is complaining about it.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200305083714.9381-4-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit 3b2323c2c1 ("perf bench futex: Use cpumaps") the default
number of threads the benchmark uses got changed from number of online
CPUs to zero:
$ perf bench futex wake
# Running 'futex/wake' benchmark:
Run summary [PID 15930]: blocking on 0 threads (at [private] futex 0x558b8ee4bfac), waking up 1 at a time.
[Run 1]: Wokeup 0 of 0 threads in 0.0000 ms
[...]
[Run 10]: Wokeup 0 of 0 threads in 0.0000 ms
Wokeup 0 of 0 threads in 0.0004 ms (+-40.82%)
Restore the old behavior by grabbing the number of online CPUs via
cpu->nr:
$ perf bench futex wake
# Running 'futex/wake' benchmark:
Run summary [PID 18356]: blocking on 8 threads (at [private] futex 0xb3e62c), waking up 1 at a time.
[Run 1]: Wokeup 8 of 8 threads in 0.0260 ms
[...]
[Run 10]: Wokeup 8 of 8 threads in 0.0270 ms
Wokeup 8 of 8 threads in 0.0419 ms (+-24.35%)
Fixes: 3b2323c2c1 ("perf bench futex: Use cpumaps")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200305083714.9381-3-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since glibc 2.28 when running 'perf top --stdio', input handling no
longer works, but hitting any key always just prints the "Mapped keys"
help text.
To fix it, call clearerr() in the display_thread() loop to clear any EOF
sticky errors, as instructed in the glibc NEWS file
(https://sourceware.org/git/?p=glibc.git;a=blob;f=NEWS):
* All stdio functions now treat end-of-file as a sticky condition. If you
read from a file until EOF, and then the file is enlarged by another
process, you must call clearerr or another function with the same effect
(e.g. fseek, rewind) before you can read the additional data. This
corrects a longstanding C99 conformance bug. It is most likely to affect
programs that use stdio to read interactive input from a terminal.
(Bug #1190.)
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200305083714.9381-2-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
clang warns:
util/block-info.c:298:18: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:51: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:18: error: result of comparison against a string
literal is unspecified (use an explicit string
comparison function instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:51: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/map.c:434:15: error: result of comparison against a string literal
is unspecified (use an explicit string comparison function instead)
[-Werror,-Wstring-compare]
if (srcline != SRCLINE_UNKNOWN)
^ ~~~~~~~~~~~~~~~
Reviewer Notes:
Looks good to me. Some more context:
https://clang.llvm.org/docs/DiagnosticsReference.html#wstring-compare
The spec says:
J.1 Unspecified behavior
The following are unspecified:
.. Whether two string literals result in distinct arrays (6.4.5).
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Keeping <john@metanate.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/900
Link: http://lore.kernel.org/lkml/20200223193456.25291-1-nick.desaulniers@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the SW-datapath ETS selftests use "ip link" stats to obtain the
number of packets that went through a given band. mlxsw then uses ethtool
per-priority counters.
Instead, change both to use qdiscs. In SW datapath this is the obvious
choice, and now that mlxsw offloads FIFO, this should work on the offloaded
datapath as well. This has the effect of verifying that the FIFO offload
works.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added one test, send_signal_sched_switch, to test bpf_send_signal()
helper triggered by sched/sched_switch tracepoint. This test can be used
to verify kernel deadlocks fixed by the previous commit. The test itself
is heavily borrowed from Commit eac9153f2b ("bpf/stackmap: Fix deadlock
with rq_lock in bpf_get_stack()").
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200304191105.2796601-1-yhs@fb.com
To get the changes in:
bbfd5e4fab ("perf/core: Add new branch sample type for HW index of raw branch records")
This silences this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
This update is a prerequisite to adding support for the HW index of raw
branch records.
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pavel Gerasimov <pavel.gerasimov@intel.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Link: http://lore.kernel.org/lkml/20200304134902.GB12612@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The restriction introduced in 7a0df7fbc1 ("seccomp: Make NEW_LISTENER and
TSYNC flags exclusive") is mostly artificial: there is enough information
in a seccomp user notification to tell which thread triggered a
notification. The reason it was introduced is because TSYNC makes the
syscall return a thread-id on failure, and NEW_LISTENER returns an fd, and
there's no way to distinguish between these two cases (well, I suppose the
caller could check all fds it has, then do the syscall, and if the return
value was an fd that already existed, then it must be a thread id, but
bleh).
Matthew would like to use these two flags together in the Chrome sandbox
which wants to use TSYNC for video drivers and NEW_LISTENER to proxy
syscalls.
So, let's fix this ugliness by adding another flag, TSYNC_ESRCH, which
tells the kernel to just return -ESRCH on a TSYNC error. This way,
NEW_LISTENER (and any subsequent seccomp() commands that want to return
positive values) don't conflict with each other.
Suggested-by: Matthew Denton <mpdenton@google.com>
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20200304180517.23867-1-tycho@tycho.ws
Signed-off-by: Kees Cook <keescook@chromium.org>
Test for two scenarios:
* When the fmod_ret program returns 0, the original function should
be called along with fentry and fexit programs.
* When the fmod_ret program returns a non-zero value, the original
function should not be called, no side effect should be observed and
fentry and fexit programs should be called.
The result from the kernel function call and whether a side-effect is
observed is returned via the retval attr of the BPF_PROG_TEST_RUN (bpf)
syscall.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-8-kpsingh@chromium.org
The current fexit and fentry tests rely on a different program to
exercise the functions they attach to. Instead of doing this, implement
the test operations for tracing which will also be used for
BPF_MODIFY_RETURN in a subsequent patch.
Also, clean up the fexit test to use the generated skeleton.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-7-kpsingh@chromium.org
When multiple programs are attached, each program receives the return
value from the previous program on the stack and the last program
provides the return value to the attached function.
The fmod_ret bpf programs are run after the fentry programs and before
the fexit programs. The original function is only called if all the
fmod_ret programs return 0 to avoid any unintended side-effects. The
success value, i.e. 0 is not currently configurable but can be made so
where user-space can specify it at load time.
For example:
int func_to_be_attached(int a, int b)
{ <--- do_fentry
do_fmod_ret:
<update ret by calling fmod_ret>
if (ret != 0)
goto do_fexit;
original_function:
<side_effects_happen_here>
} <--- do_fexit
The fmod_ret program attached to this function can be defined as:
SEC("fmod_ret/func_to_be_attached")
int BPF_PROG(func_name, int a, int b, int ret)
{
// This will skip the original function logic.
return 1;
}
The first fmod_ret program is passed 0 in its return argument.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-4-kpsingh@chromium.org
Add detection of out-of-tree built vmlinux image for the purpose of
VMLINUX_BTF detection. According to Documentation/kbuild/kbuild.rst, O takes
precedence over KBUILD_OUTPUT.
Also ensure ~/path/to/build/dir also works by relying on wildcard's resolution
first, but then applying $(abspath) at the end to also handle
O=../../whatever cases.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200304184336.165766-1-andriin@fb.com
This series makes room in the driver for differentiation between the
controllers which currently operate in TCFQ mode. Most of these are
actually capable of a lot more in terms of throughput. This is in
preparation of a second series which will convert the remaining users of
TCFQ mode altogether to XSPI mode with command cycling.
Vladimir Oltean (6):
doc: spi-fsl-dspi: Add specific compatibles for all Layerscape SoCs
spi: spi-fsl-dspi: Use specific compatible strings for all SoC
instantiations
spi: spi-fsl-dspi: Parameterize the FIFO size and DMA buffer size
spi: spi-fsl-dspi: LS2080A and LX2160A support XSPI mode
spi: spi-fsl-dspi: Support SPI software timestamping in all non-DMA
modes
spi: spi-fsl-dspi: Convert the instantiations that support it to DMA
.../devicetree/bindings/spi/spi-fsl-dspi.txt | 17 +-
drivers/spi/spi-fsl-dspi.c | 162 +++++++++++++-----
2 files changed, 128 insertions(+), 51 deletions(-)
--
2.17.1
With BPF_F_CURRENT_CPU being an enum, it is now captured in vmlinux.h and is
readily usable by runqslower. So drop local copy/pasted definition in favor of
the one coming from vmlinux.h.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200303003233.3496043-4-andriin@fb.com
Currently, BTF_KIND_ENUM type doesn't record whether enum values should be
interpreted as signed or unsigned. In Linux, most enums are unsigned, though,
so interpreting them as unsigned matches real world better.
Change btf_dump test case to test maximum 32-bit value, instead of negative
value.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200303003233.3496043-3-andriin@fb.com
Switch BPF UAPI constants, previously defined as #define macro, to anonymous
enum values. This preserves constants values and behavior in expressions, but
has added advantaged of being captured as part of DWARF and, subsequently, BTF
type info. Which, in turn, greatly improves usefulness of generated vmlinux.h
for BPF applications, as it will not require BPF users to copy/paste various
flags and constants, which are frequently used with BPF helpers. Only those
constants that are used/useful from BPF program side are converted.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200303003233.3496043-2-andriin@fb.com
If the precision of print_event_time() is zero or greater than the
timestamp, it uses a different format. But that format had an extra new
line at the end, and caused the output to not look right:
cpus=2
sleep-3946 [001]111264306005
: function: inotify_inode_queue_event
sleep-3946 [001]111264307158
: function: __fsnotify_parent
sleep-3946 [001]111264307637
: function: inotify_dentry_parent_queue_event
sleep-3946 [001]111264307989
: function: fsnotify
sleep-3946 [001]111264308401
: function: audit_syscall_exit
Fixes: 38847db974 ("libtraceevent, perf tools: Changes in tep_print_event_* APIs")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200303231852.6ab6882f@oasis.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current libperf man pages mention file counting.c "coming with libperf package",
however, the file is missing. Add the file then.
Fixes: 81de3bf37a ("libperf: Add man pages")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LPU-Reference: 20200227194424.28210-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'nr_jumps' field in 'struct annotation' is not used since it's
inception in commit 2402e4a936 ("perf annotate browser: Show 'jumpy'
functions"). Get rid of it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200204045233.474937-7-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help in debugging, add this extra message:
detect_kbuild_dir: Couldn't find "/lib/modules/5.4.20-200.fc31.x86_64/build/include/generated/autoconf.h", missing kernel-devel package?.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have supported the event modifier "percore" which sums up the event
counts for all hardware threads in a core and show the counts per core.
For example,
# perf stat -e cpu/event=cpu-cycles,percore/ -a -A -- sleep 1
Performance counter stats for 'system wide':
S0-D0-C0 395,072 cpu/event=cpu-cycles,percore/
S0-D0-C1 851,248 cpu/event=cpu-cycles,percore/
S0-D0-C2 954,226 cpu/event=cpu-cycles,percore/
S0-D0-C3 1,233,659 cpu/event=cpu-cycles,percore/
This patch provides a new option "--percore-show-thread". It is used
with event modifier "percore" together to sum up the event counts for
all hardware threads in a core but show the counts per hardware thread.
This is essentially a replacement for the any bit (which is gone in
Icelake). Per core counts are useful for some formulas, e.g. CoreIPC.
The original percore version was inconvenient to post process. This
variant matches the output of the any bit.
With this patch, for example,
# perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread -- sleep 1
Performance counter stats for 'system wide':
CPU0 2,453,061 cpu/event=cpu-cycles,percore/
CPU1 1,823,921 cpu/event=cpu-cycles,percore/
CPU2 1,383,166 cpu/event=cpu-cycles,percore/
CPU3 1,102,652 cpu/event=cpu-cycles,percore/
CPU4 2,453,061 cpu/event=cpu-cycles,percore/
CPU5 1,823,921 cpu/event=cpu-cycles,percore/
CPU6 1,383,166 cpu/event=cpu-cycles,percore/
CPU7 1,102,652 cpu/event=cpu-cycles,percore/
We can see counts are duplicated in CPU pairs (CPU0/CPU4, CPU1/CPU5,
CPU2/CPU6, CPU3/CPU7).
The interval mode also works. For example,
# perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread -I 1000
# time CPU counts unit events
1.000425421 CPU0 925,032 cpu/event=cpu-cycles,percore/
1.000425421 CPU1 430,202 cpu/event=cpu-cycles,percore/
1.000425421 CPU2 436,843 cpu/event=cpu-cycles,percore/
1.000425421 CPU3 1,192,504 cpu/event=cpu-cycles,percore/
1.000425421 CPU4 925,032 cpu/event=cpu-cycles,percore/
1.000425421 CPU5 430,202 cpu/event=cpu-cycles,percore/
1.000425421 CPU6 436,843 cpu/event=cpu-cycles,percore/
1.000425421 CPU7 1,192,504 cpu/event=cpu-cycles,percore/
If we offline CPU5, the result is:
# perf stat -e cpu/event=cpu-cycles,percore/ -a -A --percore-show-thread -- sleep 1
Performance counter stats for 'system wide':
CPU0 2,752,148 cpu/event=cpu-cycles,percore/
CPU1 1,009,312 cpu/event=cpu-cycles,percore/
CPU2 2,784,072 cpu/event=cpu-cycles,percore/
CPU3 2,427,922 cpu/event=cpu-cycles,percore/
CPU4 2,752,148 cpu/event=cpu-cycles,percore/
CPU6 2,784,072 cpu/event=cpu-cycles,percore/
CPU7 2,427,922 cpu/event=cpu-cycles,percore/
1.001416041 seconds time elapsed
v4:
---
Ravi Bangoria reports an issue in v3. Once we offline a CPU,
the output is not correct. The issue is we should use the cpu
idx in print_percore_thread rather than using the cpu value.
v3:
---
1. Fix the interval mode output error
2. Use cpu value (not cpu index) in config->aggr_get_id().
3. Refine the code according to Jiri's comments.
v2:
---
Add the explanation in change log. This is essentially a replacement
for the any bit. No code change.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200214080452.26402-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move it from tools/perf/util/cgroup.c as it can be used by other places.
Note that cgroup filesystem is different from others since it's usually
mounted separately (in v1) for each subsystem.
I just copied the code with a little modification to pass a name of
subsystem.
Suggested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200127100031.1368732-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
clang warns:
util/block-info.c:298:18: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:51: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:18: error: result of comparison against a string
literal is unspecified (use an explicit string
comparison function instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/block-info.c:298:51: error: result of comparison against a string
literal is unspecified (use an explicit string comparison function
instead) [-Werror,-Wstring-compare]
if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) {
^ ~~~~~~~~~~~~~~~
util/map.c:434:15: error: result of comparison against a string literal
is unspecified (use an explicit string comparison function instead)
[-Werror,-Wstring-compare]
if (srcline != SRCLINE_UNKNOWN)
^ ~~~~~~~~~~~~~~~
Reviewer Notes:
Looks good to me. Some more context:
https://clang.llvm.org/docs/DiagnosticsReference.html#wstring-compare
The spec says:
J.1 Unspecified behavior
The following are unspecified:
.. Whether two string literals result in distinct arrays (6.4.5).
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Keeping <john@metanate.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/900
Link: http://lore.kernel.org/lkml/20200223193456.25291-1-nick.desaulniers@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf symbols:
Arnaldo Carvalho de Melo:
- Don't try to find a vmlinux file when looking for kernel modules,
fixing symbol resolution in systems with compressed kernel modules.
perf env:
Arnaldo Carvalho de Melo:
- Do not return pointers to local variables, fixing valid warning from
gcc 10 for corner case that stops the build due to -Werror.
perf tests:
Arnaldo Carvalho de Melo:
- Make global variable static in the bp_account entry to fix build
with gcc 10.
perf parse-events:
Arnaldo Carvalho de Melo:
- Use asprintf() instead of strncpy() to read tracepoint files, addressing
compiler warning that stops the build as we use -Werror.
perf bench:
Arnaldo Carvalho de Melo:
- Share some global variables to fix build with gcc 10.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXl6zlgAKCRCyPKLppCJ+
Jx34AQDPV4zwkMjGxIWIkOQG5KupBodekNu2QmALAng/9y0B1gD/ZN0mLsSLbhR4
9MDq0HiOeApV2cR+Lzwi1JFQ92/kuwM=
=xFX0
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.6-20200303' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
perf symbols:
Arnaldo Carvalho de Melo:
- Don't try to find a vmlinux file when looking for kernel modules,
fixing symbol resolution in systems with compressed kernel modules.
perf env:
Arnaldo Carvalho de Melo:
- Do not return pointers to local variables, fixing valid warning from
gcc 10 for corner case that stops the build due to -Werror.
perf tests:
Arnaldo Carvalho de Melo:
- Make global variable static in the bp_account entry to fix build
with gcc 10.
perf parse-events:
Arnaldo Carvalho de Melo:
- Use asprintf() instead of strncpy() to read tracepoint files, addressing
compiler warning that stops the build as we use -Werror.
perf bench:
Arnaldo Carvalho de Melo:
- Share some global variables to fix build with gcc 10.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of hand-coding the busywait() predicate, use the until_counter_is()
introduced recently.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A function busywait() was recently added based on the logic in
__tc_check_packets(). Convert the code in tc_common to use the new
function.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
until_counter_is() currently takes as an argument a number and the
condition holds when the current counter value is >= that number. Make the
function more generic by taking a partial expression instead of just the
number.
Convert the two existing users.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function tc_rule_stats_get() fetches a given statistic of a TC rule
given the rule preference. Another common way to reference a rule is using
its handle. Introduce a dual to the aforementioned function that gets a
statistic given rule handle.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Internal functions, used by btf_dump__emit_type_decl(), assume field_name is
never going to be NULL. Ensure it's always the case.
Fixes: 9f81654eeb ("libbpf: Expose BTF-to-C type declaration emitting API")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200303180800.3303471-1-andriin@fb.com
This patch update {ipv4, ipv6}_addr_metric_test with
1. Set metric of address with peer route and see if the route added
correctly.
2. Modify metric and peer address for peer route and see if the route
changed correctly.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Show line and column when we got a parse error in bootconfig tool.
Current lib/bootconfig shows the parse error with byte offset, but
that is not human readable.
This makes xbc_init() not showing error message itself but able to
pass the error message and position to caller, so that the caller
can decode it and show the error message with line number and columns.
With this patch, bootconfig tool shows an error with line:column as
below.
$ cat samples/bad-dotword.bconf
# do not start keyword with .
key {
.word = 1
}
$ ./bootconfig -a samples/bad-dotword.bconf initrd
Parse Error: Invalid keyword at 3:3
Link: http://lkml.kernel.org/r/158323469002.10560.4023923847704522760.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Support O=<builddir> option to build bootconfig tool in
the other directory. As same as other tools, if you specify
O=<builddir>, bootconfig command is build under <builddir>.
Link: http://lkml.kernel.org/r/158323468033.10560.14661631369326294355.stgit@devnote2
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The dso->kernel value is now set to everything that is in
machine->kmaps, but that was being used to decide if vmlinux lookup is
needed, which ended up making that lookup be made for kernel modules,
that now have dso->kernel set, leading to these kinds of warnings when
running on a machine with compressed kernel modules, like fedora:31:
[root@five ~]# perf record -F 10000 -a sleep 2
[ perf record: Woken up 1 times to write data ]
lzma: fopen failed on vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory'
lzma: fopen failed on vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory'
lzma: fopen failed on vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory'
lzma: fopen failed on vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory'
lzma: fopen failed on vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux: 'No such file or directory'
lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory'
lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory'
[ perf record: Captured and wrote 1.024 MB perf.data (1366 samples) ]
[root@five ~]#
This happens when collecting the buildid, when we find samples for
kernel modules, fix it by checking if the looked up DSO is a kernel
module by other means.
Fixes: 02213cec64 ("perf maps: Mark module DSOs with kernel type")
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200302191007.GD10335@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Noticed with gcc 10 (fedora rawhide) that those variables were not being
declared as static, so end up with:
ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `end'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `start'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `runtime'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `end'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `start'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `runtime'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
make[4]: *** [/git/perf/tools/build/Makefile.build:145: /tmp/build/perf/bench/perf-in.o] Error 1
Prefix those with bench__ and add them to bench/bench.h, so that we can
share those on the tools needing to access those variables from signal
handlers.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200303155811.GD13702@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With bpf_link abstraction supported by kernel explicitly, add
pinning/unpinning API for links. Also allow to create (open) bpf_link from BPF
FS file.
This API allows to have an "ephemeral" FD-based BPF links (like raw tracepoint
or fexit/freplace attachments) surviving user process exit, by pinning them in
a BPF FS, which is an important use case for long-running BPF programs.
As part of this, expose underlying FD for bpf_link. While legacy bpf_link's
might not have a FD associated with them (which will be expressed as
a bpf_link with fd=-1), kernel's abstraction is based around FD-based usage,
so match it closely. This, subsequently, allows to have a generic
pinning/unpinning API for generalized bpf_link. For some types of bpf_links
kernel might not support pinning, in which case bpf_link__pin() will return
error.
With FD being part of generic bpf_link, also get rid of bpf_link_fd in favor
of using vanialla bpf_link.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200303043159.323675-3-andriin@fb.com
The cgroup selftests did not declare the bpf_log_buf variable as static, leading
to a linker error with GCC 10 (which defaults to -fno-common). Fix this by
adding the missing static declarations.
Fixes: 257c88559f ("selftests/bpf: Convert test_cgroup_attach to prog_tests")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20200302145348.559177-1-toke@redhat.com
Move BPF_PROG, BPF_KPROBE, and BPF_KRETPROBE macro into libbpf's bpf_tracing.h
header to make it available for non-selftests users.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200229231112.1240137-5-andriin@fb.com
For kretprobes, there is no point in capturing input arguments from pt_regs,
as they are going to be, most probably, clobbered by the time probed kernel
function returns. So switch BPF_KRETPROBE to accept zero or one argument
(optional return result).
Fixes: ac065870d9 ("selftests/bpf: Add BPF_PROG, BPF_KPROBE, and BPF_KRETPROBE macros")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200229231112.1240137-4-andriin@fb.com
Add detection of vmlinux.h to bpf_tracing.h header for PT_REGS macro.
Currently, BPF applications have to define __KERNEL__ symbol to use correct
definition of struct pt_regs on x86 arch. This is due to different field names
under internal kernel vs UAPI conditions. To make this more transparent for
users, detect vmlinux.h by checking __VMLINUX_H__ symbol.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200229231112.1240137-3-andriin@fb.com
Add canonical #ifndef/#define/#endif guard for generated vmlinux.h header with
__VMLINUX_H__ symbol. __VMLINUX_H__ is also going to play double role of
identifying whether vmlinux.h is being used, versus, say, BCC or non-CO-RE
libbpf modes with dependency on kernel headers. This will make it possible to
write helper macro/functions, agnostic to exact BPF program set up.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200229231112.1240137-2-andriin@fb.com
Building cpupower with -fno-common in CFLAGS results in errors due to
multiple definitions of the 'cpu_count' and 'start_time' variables.
./utils/idle_monitor/snb_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
multiple definition of `cpu_count';
./utils/idle_monitor/nhm_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
first defined here
...
./utils/idle_monitor/cpuidle_sysfs.o:./utils/idle_monitor/cpuidle_sysfs.c:22:
multiple definition of `start_time';
./utils/idle_monitor/amd_fam14h_idle.o:./utils/idle_monitor/amd_fam14h_idle.c:85:
first defined here
The -fno-common option will be enabled by default in GCC 10.
Bug: https://bugs.gentoo.org/707462
Signed-off-by: Mike Gilbert <floppym@gentoo.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Make the code more compact by using asprintf() instead of malloc()+strncpy() which also uses
less memory and avoids these warnings with gcc 10:
CC /tmp/build/perf/util/cloexec.o
In file included from /usr/include/string.h:495,
from util/parse-events.h:12,
from util/parse-events.c:18:
In function ‘strncpy’,
inlined from ‘tracepoint_id_to_path’ at util/parse-events.c:271:5:
/usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ offset [275, 511] from the object at ‘sys_dirent’ is out of the bounds of referenced subobject ‘d_name’ with type ‘char[256]’ at offset 19 [-Werror=array-bounds]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/dirent.h:61,
from util/parse-events.c:5:
util/parse-events.c: In function ‘tracepoint_id_to_path’:
/usr/include/bits/dirent.h:33:10: note: subobject ‘d_name’ declared here
33 | char d_name[256]; /* We must not include limits.h! */
| ^~~~~~
In file included from /usr/include/string.h:495,
from util/parse-events.h:12,
from util/parse-events.c:18:
In function ‘strncpy’,
inlined from ‘tracepoint_id_to_path’ at util/parse-events.c:273:5:
/usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ offset [275, 511] from the object at ‘evt_dirent’ is out of the bounds of referenced subobject ‘d_name’ with type ‘char[256]’ at offset 19 [-Werror=array-bounds]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/dirent.h:61,
from util/parse-events.c:5:
util/parse-events.c: In function ‘tracepoint_id_to_path’:
/usr/include/bits/dirent.h:33:10: note: subobject ‘d_name’ declared here
33 | char d_name[256]; /* We must not include limits.h! */
| ^~~~~~
CC /tmp/build/perf/util/call-path.o
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200302145535.GA28183@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is possible to return a pointer to a local variable when looking up
the architecture name for the running system and no normalization is
done on that value, i.e. we may end up returning the uts.machine local
variable.
While this doesn't happen on most arches, as normalization takes place,
lets fix this by making that a static variable and optimize it a bit by
not always running uname(), only the first time.
Noticed in fedora rawhide running with:
[perfbuilder@a5ff49d6e6e4 ~]$ gcc --version
gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8)
Reported-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To fix the build with newer gccs, that without this patch exit with:
LD /tmp/build/perf/tests/perf-in.o
ld: /tmp/build/perf/tests/bp_account.o:/git/perf/tools/perf/tests/bp_account.c:22: multiple definition of `the_var'; /tmp/build/perf/tests/bp_signal.o:/git/perf/tools/perf/tests/bp_signal.c:38: first defined here
make[4]: *** [/git/perf/tools/build/Makefile.build:145: /tmp/build/perf/tests/perf-in.o] Error 1
First noticed in fedora:rawhide/32 with:
[perfbuilder@a5ff49d6e6e4 ~]$ gcc --version
gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8)
Reported-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Ingo Molnar:
"No kernel side changes, all tooling fixes plus two tooling cleanups
that were committed late in the merge window alongside the perf
annotate fixes, delayed by Arnaldo's European trip"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
perf annotate: Fix segfault with source toggle
perf annotate: Align struct annotate_args
perf annotate: Simplify disasm_line allocation and freeing code
perf annotate: Remove privsize from symbol__annotate() args
perf probe: Check return value of strlist__add() for -ENOMEM
perf config: Document missing config options
perf annotate: Fix perf config option description
perf annotate: Prefer cmdline option over default config
perf annotate: Make perf config effective
perf config: Introduce perf_config_u8()
perf annotate: Fix --show-nr-samples for tui/stdio2
perf annotate: Fix --show-total-period for tui/stdio2
perf annotate/tui: Re-render title bar after switching back from script browser
tools headers UAPI: Update tools's copy of kvm.h headers
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf arch powerpc: Sync powerpc syscall.tbl with the kernel sources
perf auxtrace: Add auxtrace_record__read_finish()
perf arm-spe: Fix endless record after being terminated
perf cs-etm: Fix endless record after being terminated
perf intel-bts: Fix endless record after being terminated
...
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-02-28
The following pull-request contains BPF updates for your *net-next* tree.
We've added 41 non-merge commits during the last 7 day(s) which contain
a total of 49 files changed, 1383 insertions(+), 499 deletions(-).
The main changes are:
1) BPF and Real-Time nicely co-exist.
2) bpftool feature improvements.
3) retrieve bpf_sk_storage via INET_DIAG.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp conflict was overlapping additions.
The SMC conflict was an additional and removal happening at the same
time.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix leak in nl80211 AP start where we leak the ACL memory, from
Johannes Berg.
2) Fix double mutex unlock in mac80211, from Andrei Otcheretianski.
3) Fix RCU stall in ipset, from Jozsef Kadlecsik.
4) Fix devlink locking in devlink_dpipe_table_register, from Madhuparna
Bhowmik.
5) Fix race causing TX hang in ll_temac, from Esben Haabendal.
6) Stale eth hdr pointer in br_dev_xmit(), from Nikolay Aleksandrov.
7) Fix TX hash calculation bounds checking wrt. tc rules, from Amritha
Nambiar.
8) Size netlink responses properly in schedule action code to take into
consideration TCA_ACT_FLAGS. From Jiri Pirko.
9) Fix firmware paths for mscc PHY driver, from Antoine Tenart.
10) Don't register stmmac notifier multiple times, from Aaro Koskinen.
11) Various rmnet bug fixes, from Taehee Yoo.
12) Fix vsock deadlock in vsock transport release, from Stefano
Garzarella.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
net: dsa: mv88e6xxx: Fix masking of egress port
mlxsw: pci: Wait longer before accessing the device after reset
sfc: fix timestamp reconstruction at 16-bit rollover points
vsock: fix potential deadlock in transport->release()
unix: It's CONFIG_PROC_FS not CONFIG_PROCFS
net: rmnet: fix packet forwarding in rmnet bridge mode
net: rmnet: fix bridge mode bugs
net: rmnet: use upper/lower device infrastructure
net: rmnet: do not allow to change mux id if mux id is duplicated
net: rmnet: remove rcu_read_lock in rmnet_force_unassociate_device()
net: rmnet: fix suspicious RCU usage
net: rmnet: fix NULL pointer dereference in rmnet_changelink()
net: rmnet: fix NULL pointer dereference in rmnet_newlink()
net: phy: marvell: don't interpret PHY status unless resolved
mlx5: register lag notifier for init network namespace only
unix: define and set show_fdinfo only if procfs is enabled
hinic: fix a bug of rss configuration
hinic: fix a bug of setting hw_ioctxt
hinic: fix a irq affinity bug
net/smc: check for valid ib_client_data
...
The scale test for Spectrum-2 should be invoked for Spectrum-2 and
Spectrum-3. Add the appropriate device ID.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the test inserts X /32 routes and for each route it is
testing that a packet sent from the first host is received by the second
host, which is very time-consuming.
Instead only validate the offload flag of each route and get the same result.
Wait between the creation of the routes and the offload validation in
order to make sure that all the routes were successfully offloaded.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After adding a given number of flower rules for different IPv6
addresses, the test generates traffic and ensures that each packet is
received, which is time-consuming.
Instead, test the offload indication of the tc flower rules and reduce
the running time by half.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test the max shared buffer occupancy for port's pool and port's TC's (using
different types of packets).
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add mlxsw lib for common defines, helpers etc.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two devlink port helpers:
* devlink port get by netdev
* devlink cpu port get
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sanity check for devlink info command.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test physical ports' shared buffer configuration options using random
values related to a specific configuration option. There are 3
configuration options: pool, TC bind and portpool.
Each sub-test, test a different configuration option and random the related
values as the follow:
* For pools, pool's size will be randomized.
* For TC bind, pool number and threshold will be randomized.
* For portpools, threshold will be randomized.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rtnetlink test uses offload indication checks.
Use a busywait helper and wait until the offload indication is set or
fail if it reaches timeout.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vxlan test uses offload indication checks.
Use a busywait helper and wait until the offload indication is set or
fail if it reaches timeout.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Blackhole routes test uses offload indication checks.
Use busywait helper and wait until the routes offload indication is set or
fail if it reaches timeout.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test checks that packets are trapped when they should egress a
router interface (RIF) that has become disabled. This is a temporary
state in a RIF's deletion sequence.
Currently, the test deletes the RIF by flushing all the IP addresses
configured on the associated netdev (br0). However, this is racy, as
this also flushes all the routes pointing to the netdev and if the
routes are deleted from the device before the RIF is disabled, then no
packets will try to egress the disabled RIF and the trap will not be
triggered.
Instead, trigger the deletion of the RIF by unlinking the mlxsw port
from the bridge that is backing the RIF. Unlike before, this will not
cause the kernel to delete the routes pointing to the bridge.
Note that due to current mlxsw locking scheme the RIF is always deleted
first, but this is going to change.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include test of forbidding to have multiple mirror actions.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include test of forbidding to have redirect rule on egress-bound block.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This tests that below the queue minimum length, there is no dropping /
marking, and above max, everything is dropped / marked.
The test is structured as a core file with topology and test code, and
three wrappers: one for RED used as a root Qdisc, and two for
testing (W)RED under PRIO and ETS.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract a helper __start_traffic() configurable by protocol type. Allow
passing through extra mausezahn arguments. Add a wrapper,
start_tcp_traffic().
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The radix tree doesn't use alignment, so the argument was ignored.
The maple tree needs its nodes to be aligned, so we need to pay attention
to the alignment argument. Also change the types of 'size' and 'align'
to unsigned int to match commit f4957d5bd0.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
While rendering annotate browser from perf report tui, we keep track
of total number of lines(asm + source) in annotation->nr_entries and
total number of asm lines in annotation->nr_asm_entries. But we don't
reset them before starting. Thus if user annotates same function
multiple times, we restart incrementing these fields with old values.
This causes a segfault when user tries to toggle source code after
annotating same function multiple times. Fix it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200204045233.474937-5-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Align fields of struct annotate_args.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200204045233.474937-4-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We are allocating disasm_line object in annotation_line__new() instead
of disasm_line__new(). Similarly annotation_line__delete() is actually
freeing disasm_line object as well. This complexity is because of
privsize. But we don't need privsize anymore so get rid of privsize and
simplify disasm_line allocation and freeing code.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200204045233.474937-3-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
privsize is passed as 0 from all the symbol__annotate() callers.
Remove it from argument list.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20200204045233.474937-2-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
strlist__add() may fail with -ENOMEM. Check it and give debugging hint
in advance.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/1582727404-180095-1-git-send-email-zhe.he@windriver.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While documenting annotate.show_nr_samples config option, I found many
other config options missing in perf-config documentation. Add them.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-9-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf config annotate options says it works only with TUI, which is wrong.
Most of the TUI options are applicable to stdio2 as well. So remove that
generic line and add individual line with each option stating which
browsers supports that option. Also, annotate.show_nr_samples config is
missing in Documentation. Describe it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-8-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For all the perf-config options that can also be set from command line
option, the preference is given to command line version in case of any
conflict. But that's opposite in case of perf annotate. i.e. the more
preference is given to default option rather than command line option.
Fix it.
Before:
$ ./perf config
annotate.show_nr_samples=false
$ ./perf annotate shash --show-nr-samples
Percent│
│24: mov -0xc(%rbp),%eax
49.19 │ imul $0x1003f,%eax,%ecx
│ mov -0x18(%rbp),%rax
After:
Samples│
│24: mov -0xc(%rbp),%eax
1 │ imul $0x1003f,%eax,%ecx
│ mov -0x18(%rbp),%rax
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-7-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce perf_config_u8() utility function to convert char * input into
u8 destination. We will utilize it in followup patch.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-5-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf annotate --show-nr-samples does not really show number of samples.
The reason is we have two separate variables for the same purpose.
One is in symbol_conf.show_nr_samples and another is
annotation_options.show_nr_samples.
We save command line option in symbol_conf.show_nr_samples but uses
annotation_option.show_nr_samples while rendering tui/stdio2 browser.
Though, we copy symbol_conf.show_nr_samples to
annotation__default_options.show_nr_samples but that is not really
effective as we don't use annotation__default_options once we copy
default options to dynamic variable annotate.opts in cmd_annotate().
Instead of all these complication, keep only one variable and use it all
over. symbol_conf.show_nr_samples is used by perf report/top as well. So
let's kill annotation_options.show_nr_samples.
On a side note, I've kept annotation_options.show_nr_samples definition
because it's still used by perf-config code. Follow up patch to fix
perf-config for annotate will remove annotation_options.show_nr_samples.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-4-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf annotate --show-total-period does not really show total period.
The reason is we have two separate variables for the same purpose.
One is in symbol_conf.show_total_period and another is
annotation_options.show_total_period.
We save command line option in symbol_conf.show_total_period but uses
annotation_option.show_total_period while rendering tui/stdio2 browser.
Though, we copy symbol_conf.show_total_period to
annotation__default_options.show_total_period but that is not really
effective as we don't use annotation__default_options once we copy
default options to dynamic variable annotate.opts in cmd_annotate().
Instead of all these complication, keep only one variable and use it all
over. symbol_conf.show_total_period is used by perf report/top as well.
So let's kill annotation_options.show_total_period.
On a side note, I've kept annotation_options.show_total_period
definition because it's still used by perf-config code. Follow up patch
to fix perf-config for annotate will remove
annotation_options.show_total_period.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-3-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf annotate' TUI browser provides a 'r' hot key to switch to a
script browser. But the annotate browser title bar becomes hidden while
switching back from script browser. Fix it.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-2-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
5ef8acbdd6 ("KVM: nVMX: Emulate MTF when performing instruction emulation")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
No change in tooling ensues, just the x86 kvm tooling gets rebuilt as
those headers are included in its build:
$ cp arch/x86/include/uapi/asm/kvm.h tools/arch/x86/include/uapi/asm/kvm.h
$ make -C tools/perf
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
Auto-detecting system features:
... dwarf: [ on ]
<SNIP>
... disassembler-four-args: [ on ]
DESCEND plugins
CC /tmp/build/perf/arch/x86/util/kvm-stat.o
<SNIP>
LD /tmp/build/perf/arch/x86/util/perf-in.o
LD /tmp/build/perf/arch/x86/perf-in.o
LD /tmp/build/perf/arch/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
<SNIP>
$
As it doesn't seem to be used there:
$ grep STATE tools/perf/arch/x86/util/kvm-stat.c
$
And the 'perf trace' beautifier table generator isn't interested in
these things:
$ grep regex= tools/perf/trace/beauty/kvm_ioctl.sh
regex='^#[[:space:]]*define[[:space:]]+KVM_(\w+)[[:space:]]+_IO[RW]*\([[:space:]]*KVMIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*'
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oupton@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from these csets:
21b5ee59ef ("x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF")
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ git diff
diff --git a/tools/arch/x86/include/asm/msr-index.h b/tools/arch/x86/include/asm/msr-index.h
index ebe1685e92dd..d5e517d1c3dd 100644
--- a/tools/arch/x86/include/asm/msr-index.h
+++ b/tools/arch/x86/include/asm/msr-index.h
@@ -512,6 +512,8 @@
#define MSR_K7_HWCR 0xc0010015
#define MSR_K7_HWCR_SMMLOCK_BIT 0
#define MSR_K7_HWCR_SMMLOCK BIT_ULL(MSR_K7_HWCR_SMMLOCK_BIT)
+#define MSR_K7_HWCR_IRPERF_EN_BIT 30
+#define MSR_K7_HWCR_IRPERF_EN BIT_ULL(MSR_K7_HWCR_IRPERF_EN_BIT)
#define MSR_K7_FID_VID_CTL 0xc0010041
#define MSR_K7_FID_VID_STATUS 0xc0010042
$
That don't result in any change in tooling:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
To silence this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change in API of bootconfig (before it comes live in a release)
- Have a magic value "BOOTCONFIG" in initrd to know a bootconfig exists
- Set CONFIG_BOOT_CONFIG to 'n' by default
- Show error if "bootconfig" on cmdline but not compiled in
- Prevent redefining the same value
- Have a way to append values
- Added a SELECT BLK_DEV_INITRD to fix a build failure
Synthetic event fixes:
- Switch to raw_smp_processor_id() for recording CPU value in preempt
section. (No care for what the value actually is)
- Fix samples always recording u64 values
- Fix endianess
- Check number of values matches number of fields
- Fix a printing bug
Fix of trace_printk() breaking postponed start up tests
Make a function static that is only used in a single file.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXlW4vxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtioAP0WLEm3dWO0z3321h/a0DSshC+Bslu3
HDPTsGVGrXmvggEA/lr1ikRHd8PsO7zW8BfaZMxoXaTqXiuSrzEWxnMlFw0=
=O8PM
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing and bootconfig updates:
"Fixes and changes to bootconfig before it goes live in a release.
Change in API of bootconfig (before it comes live in a release):
- Have a magic value "BOOTCONFIG" in initrd to know a bootconfig
exists
- Set CONFIG_BOOT_CONFIG to 'n' by default
- Show error if "bootconfig" on cmdline but not compiled in
- Prevent redefining the same value
- Have a way to append values
- Added a SELECT BLK_DEV_INITRD to fix a build failure
Synthetic event fixes:
- Switch to raw_smp_processor_id() for recording CPU value in preempt
section. (No care for what the value actually is)
- Fix samples always recording u64 values
- Fix endianess
- Check number of values matches number of fields
- Fix a printing bug
Fix of trace_printk() breaking postponed start up tests
Make a function static that is only used in a single file"
* tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issue
bootconfig: Add append value operator support
bootconfig: Prohibit re-defining value on same key
bootconfig: Print array as multiple commands for legacy command line
bootconfig: Reject subkey and value on same parent key
tools/bootconfig: Remove unneeded error message silencer
bootconfig: Add bootconfig magic word for indicating bootconfig explicitly
bootconfig: Set CONFIG_BOOT_CONFIG=n by default
tracing: Clear trace_state when starting trace
bootconfig: Mark boot_config_checksum() static
tracing: Disable trace_printk() on post poned tests
tracing: Have synthetic event test use raw_smp_processor_id()
tracing: Fix number printing bug in print_synth_event()
tracing: Check that number of vals matches number of synth event fields
tracing: Make synth_event trace functions endian-correct
tracing: Make sure synth_event_trace() example always uses u64
This Kselftest kunit update consists of fixes to documentation and
run-time tool from Brendan Higgins and Heidi Fahim.
-----BEGIN PGP SIGNATURE-----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=Q7Zl
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fixes from Shuah Khan:
"This Kselftest kunit update consists of fixes to documentation and
the run-time tool from Brendan Higgins and Heidi Fahim"
* tag 'linux-kselftest-kunit-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: run kunit_tool from any directory
kunit: test: Improve error messages for kunit_tool when kunitconfig is invalid
Documentation: kunit: fixed sphinx error in code block
This Kselftest update for Linux 5.6-rc4 consists of:
- fixes to TIMEOUT failures and out-of-tree compilation compilation
errors from Michael Ellerman.
- Declutter git status fix from Christophe Leroy
-----BEGIN PGP SIGNATURE-----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=QRUz
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
- fixes to TIMEOUT failures and out-of-tree compilation compilation
errors from Michael Ellerman.
- declutter git status fix from Christophe Leroy
* tag 'linux-kselftest-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/rseq: Fix out-of-tree compilation
selftests: Install settings files to fix TIMEOUT failures
selftest/lkdtm: Don't pollute 'git status'
Add Python module with tests for "bpftool feature" command, which mainly
checks whether the "full" option is working properly.
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200226165941.6379-6-mrostecki@opensuse.org
Update bash completion for "bpftool feature" command with the new
argument: "full".
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200226165941.6379-5-mrostecki@opensuse.org
Update documentation of "bpftool feature" command with information about
new arguments: "full".
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200226165941.6379-4-mrostecki@opensuse.org
Probes related to bpf_probe_write_user and bpf_trace_printk helpers emit
dmesg warnings which might be confusing for people running bpftool on
production environments. This change filters them out by default and
introduces the new positional argument "full" which enables all
available probes.
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200226165941.6379-3-mrostecki@opensuse.org
Remove all calls of print_end_then_start_section function and for loops
out from the do_probe function. Instead, provide separate functions for
each section (like i.e. section_helpers) which are called in do_probe.
This change is motivated by better readability.
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200226165941.6379-2-mrostecki@opensuse.org
auxtrace:
Adrian Hunter:
- Fix endless record after being terminated on arm-spe.
Wei Li:
- Fix endless record after being terminated on Intel PT and BTS and
on ARM's cs-etm.
perf test:
Thomas Richter
- Fix test trace+probe_vfs_getname.sh on s390
PowerPC:
Arnaldo Carvalho de Melo:
- Sync powerpc syscall.tbl with the kernel sources.
BPF:
Arnaldo Carvalho de Melo:
- Remove extraneous bpf/ subdir from bpf.h headers used to build bpf events.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXk82oQAKCRCyPKLppCJ+
J88IAP9m763x0sW44iNxv2RvA021JWYSbMb5XnsUTZ+ELBkqEAD/fU80obv1hAXP
8LIc6bC6Zv/J+RMa3HHNx0qLiLqgHQo=
=m+4d
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.6-20200220' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
auxtrace:
Adrian Hunter:
- Fix endless record after being terminated on arm-spe.
Wei Li:
- Fix endless record after being terminated on Intel PT and BTS and
on ARM's cs-etm.
perf test:
Thomas Richter
- Fix test trace+probe_vfs_getname.sh on s390
PowerPC:
Arnaldo Carvalho de Melo:
- Sync powerpc syscall.tbl with the kernel sources.
BPF:
Arnaldo Carvalho de Melo:
- Remove extraneous bpf/ subdir from bpf.h headers used to build bpf events.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a specific test for the crash reported by Phil Sutter and addressed
in the previous patch. The test cases that, in my intention, should
have covered these cases, that is, the ones from the 'concurrency'
section, don't run these sequences tightly enough and spectacularly
failed to catch this.
While at it, define a convenient way to add these kind of tests, by
adding a "reported issues" test section.
It's more convenient, for this particular test, to execute the set
setup in its own function. However, future test cases like this one
might need to call setup functions, and will typically need no tools
other than nft, so allow for this in check_tools().
The original form of the reproducer used here was provided by Phil.
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Due to various bugs in tests clean up code (usually), if host system is
misconfigured, it happens that test_progs will just crash in the middle of
running a test with little to no indication of where and why the crash
happened. For cases where coredump is not readily available (e.g., inside
a CI), it's very helpful to have a stack trace, which lead to crash, to be
printed out. This change adds a signal handler that will capture and print out
symbolized backtrace:
$ sudo ./test_progs -t mmap
test_mmap:PASS:skel_open_and_load 0 nsec
test_mmap:PASS:bss_mmap 0 nsec
test_mmap:PASS:data_mmap 0 nsec
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x18)[0x42a888]
/lib64/libpthread.so.0(+0xf5d0)[0x7f2aab5175d0]
./test_progs(test_mmap+0x3c0)[0x41f0a0]
./test_progs(main+0x160)[0x407d10]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x7f2aab15d3d5]
./test_progs[0x407ebc]
[1] 1988412 segmentation fault (core dumped) sudo ./test_progs -t mmap
Unfortunately, glibc's symbolization support is unable to symbolize static
functions, only global ones will be present in stack trace. But it's still a
step forward without adding extra libraries to get a better symbolization.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200225000847.3965188-1-andriin@fb.com
Extend existing devlink trap test to include metadata type for flow
action cookie.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before nftables commit fb9cea50e8b3 ("main: enforce options before
commands"), 'nft list ruleset -a' happened to work, but it's wrong
and won't work anymore. Replace it by 'nft -a list ruleset'.
Reported-by: Chen Yi <yiche@redhat.com>
Fixes: 611973c1e0 ("selftests: netfilter: Introduce tests for sets with range concatenation")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently we run SYN cookies test for all socket types and mark the test as
skipped if socket type is not compatible. This causes confusion because
skipped test might indicate a problem with the testing environment.
Instead, run the test only for the socket type which supports SYN cookies.
Also, switch to using designated initializers when setting up tests, so
that we can tweak only some test parameters, leaving the rest initialized
to default values.
Fixes: eecd618b45 ("selftests/bpf: Mark SYN cookie test skipped for UDP sockets")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200224135327.121542-2-jakub@cloudflare.com
SOCKMAP and SOCKHASH map types can be used with reuseport BPF programs but
don't support yet storing UDP sockets. Instead of marking UDP tests with
SOCK{MAP,HASH} as skipped, don't run them at all.
Skipped test might signal that the test environment is not suitable for
running the test, while in reality the functionality is not implemented in
the kernel yet.
Before:
sh# ./test_progs -t select_reuseport
…
#40 select_reuseport:OK
Summary: 1/126 PASSED, 30 SKIPPED, 0 FAILED
After:
sh# ./test_progs -t select_reuseport
…
#40 select_reuseport:OK
Summary: 1/98 PASSED, 2 SKIPPED, 0 FAILED
The remaining two skipped tests are SYN cookies tests, which will be
addressed in the subsequent patch.
Fixes: 11318ba8ca ("selftests/bpf: Extend SK_REUSEPORT tests to cover SOCKMAP/SOCKHASH")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200224135327.121542-1-jakub@cloudflare.com
Add a test to check functionality of ACL traps.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the helpers assume pref 1 and handle 101. Make that explicit
and pass the values from callers.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include test of forbidding to have drop rule on mixed-bound
shared block.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While userfaultfd, KVM's demand paging implementation, is not specific
to KVM, having a benchmark for its performance will be useful for
guiding performance improvements to KVM. As a first step towards creating
a userfaultfd demand paging test, create a simple memory access test,
based on dirty_log_test.
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guests and hosts don't have to have the same page size. This means
calculations are necessary when selecting the number of guest pages
to allocate in order to ensure the number is compatible with the
host. Provide utilities to help with those calculations and apply
them where appropriate.
We also revert commit bffed38d4f ("kvm: selftests: aarch64:
dirty_log_test: fix unaligned memslot size") and then use
vm_adjust_num_guest_pages() there instead.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This array will allow us to easily translate modes to their parameter
values.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We're going to want this name in the library code, so use a shorter
name in the tests.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
BITS_PER_LONG and friends are provided by linux/bitops.h
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I'm not sure how we ended up using printf instead of fprintf in
virt_dump(). Fix it.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-02-21
The following pull-request contains BPF updates for your *net-next* tree.
We've added 25 non-merge commits during the last 4 day(s) which contain
a total of 33 files changed, 2433 insertions(+), 161 deletions(-).
The main changes are:
1) Allow for adding TCP listen sockets into sock_map/hash so they can be used
with reuseport BPF programs, from Jakub Sitnicki.
2) Add a new bpf_program__set_attach_target() helper for adding libbpf support
to specify the tracepoint/function dynamically, from Eelco Chaudron.
3) Add bpf_read_branch_records() BPF helper which helps use cases like profile
guided optimizations, from Daniel Xu.
4) Enable bpf_perf_event_read_value() in all tracing programs, from Song Liu.
5) Relax BTF mandatory check if only used for libbpf itself e.g. to process
BTF defined maps, from Andrii Nakryiko.
6) Move BPF selftests -mcpu compilation attribute from 'probe' to 'v3' as it has
been observed that former fails in envs with low memlock, from Yonghong Song.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that SOCKMAP and SOCKHASH map types can store listening sockets,
user-space and BPF API is open to a new set of potential pitfalls.
Exercise the map operations, with extra attention to code paths susceptible
to races between map ops and socket cloning, and BPF helpers that work with
SOCKMAP/SOCKHASH to gain confidence that all works as expected.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200218171023.844439-12-jakub@cloudflare.com
Parametrize the SK_REUSEPORT tests so that the map type for storing sockets
is not hard-coded in the test setup routine.
This, together with careful state cleaning after the tests, lets us run the
test cases for REUSEPORT_ARRAY, SOCKMAP, and SOCKHASH to have test coverage
for all supported map types. The last two support only TCP sockets at the
moment.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200218171023.844439-11-jakub@cloudflare.com
In order for sockmap/sockhash types to become generic collections for
storing TCP sockets we need to loosen the checks during map update, while
tightening the checks in redirect helpers.
Currently sock{map,hash} require the TCP socket to be in established state,
which prevents inserting listening sockets.
Change the update pre-checks so the socket can also be in listening state.
Since it doesn't make sense to redirect with sock{map,hash} to listening
sockets, add appropriate socket state checks to BPF redirect helpers too.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200218171023.844439-5-jakub@cloudflare.com
Pull networking fixes from David Miller:
1) Limit xt_hashlimit hash table size to avoid OOM or hung tasks, from
Cong Wang.
2) Fix deadlock in xsk by publishing global consumer pointers when NAPI
is finished, from Magnus Karlsson.
3) Set table field properly to RT_TABLE_COMPAT when necessary, from
Jethro Beekman.
4) NLA_STRING attributes are not necessary NULL terminated, deal wiht
that in IFLA_ALT_IFNAME. From Eric Dumazet.
5) Fix checksum handling in atlantic driver, from Dmitry Bezrukov.
6) Handle mtu==0 devices properly in wireguard, from Jason A.
Donenfeld.
7) Fix several lockdep warnings in bonding, from Taehee Yoo.
8) Fix cls_flower port blocking, from Jason Baron.
9) Sanitize internal map names in libbpf, from Toke Høiland-Jørgensen.
10) Fix RDMA race in qede driver, from Michal Kalderon.
11) Fix several false lockdep warnings by adding conditions to
list_for_each_entry_rcu(), from Madhuparna Bhowmik.
12) Fix sleep in atomic in mlx5 driver, from Huy Nguyen.
13) Fix potential deadlock in bpf_map_do_batch(), from Yonghong Song.
14) Hey, variables declared in switch statement before any case
statements are not initialized. I learn something every day. Get
rids of this stuff in several parts of the networking, from Kees
Cook.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.
bnxt_en: Improve device shutdown method.
net: netlink: cap max groups which will be considered in netlink_bind()
net: thunderx: workaround BGX TX Underflow issue
ionic: fix fw_status read
net: disable BRIDGE_NETFILTER by default
net: macb: Properly handle phylink on at91rm9200
s390/qeth: fix off-by-one in RX copybreak check
s390/qeth: don't warn for napi with 0 budget
s390/qeth: vnicc Fix EOPNOTSUPP precedence
openvswitch: Distribute switch variables for initialization
net: ip6_gre: Distribute switch variables for initialization
net: core: Distribute switch variables for initialization
udp: rehash on disconnect
net/tls: Fix to avoid gettig invalid tls record
bpf: Fix a potential deadlock with bpf_map_do_batch
bpf: Do not grab the bucket spinlock by default on htab batch ops
ice: Wait for VF to be reset/ready before configuration
ice: Don't tell the OS that link is going down
ice: Don't reject odd values of usecs set by user
...
The commits introducing 'mlock-random-test'[1], 'map_fiex_noreplace'[2],
and 'thuge-gen'[3] have not added those in the 'run_vmtests' script and
thus the 'run_tests' command of kselftests doesn't run those. This
commit adds those in the script.
'gup_benchmark' and 'transhuge-stress' are also not included in the
'run_vmtests', but this commit does not add those because those are for
performance measurement rather than pass/fail tests.
[1] commit 26b4224d99 ("selftests: expanding more mlock selftest")
[2] commit 91cbacc345 ("tools/testing/selftests/vm/map_fixed_noreplace.c: add test for MAP_FIXED_NOREPLACE")
[3] commit fcc1f2d5dd ("selftests: add a test program for variable huge page sizes in mmap/shmget")
Link: http://lkml.kernel.org/r/20200206085144.29126-1-sj38.park@gmail.com
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add append value operator "+=" support to bootconfig syntax.
With this operator, user can add new value to the key as
an entry of array instead of overwriting.
For example,
foo = bar
...
foo += baz
Then the key "foo" has "bar" and "baz" values as an array.
Link: http://lkml.kernel.org/r/158227283195.12842.8310503105963275584.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently, bootconfig adds a new value on the existing key to the tail of an
array. But this looks a bit confusing because an admin can easily rewrite
the original value in the same config file.
This rejects the following value re-definition.
key = value1
...
key = value2
You should rewrite value1 to value2 in this case.
Link: http://lkml.kernel.org/r/158227282199.12842.10110929876059658601.stgit@devnote2
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ Fixed spelling of arraies to arrays ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
A recent clang change, combined with a binutils bug, can trigger a
situation where a ".Lprintk$local" STT_NOTYPE symbol gets created at the
same offset as the "printk" STT_FUNC symbol. This confuses objtool:
kernel/printk/printk.o: warning: objtool: ignore_loglevel_setup()+0x10: can't find call dest symbol at .text+0xc67
Improve the call destination detection by looking specifically for an
STT_FUNC symbol.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/872
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=25551
Link: https://lkml.kernel.org/r/0a7ee320bc0ea4469bd3dc450a7b4725669e0ea9.1581997059.git.jpoimboe@redhat.com
Clang has the ability to create a switch table which is not a jump
table, but is rather a table of string pointers. This confuses objtool,
because it sees the relocations for the string pointers and assumes
they're part of a jump table:
drivers/ata/sata_dwc_460ex.o: warning: objtool: sata_dwc_bmdma_start_by_tag()+0x3a2: can't find switch jump table
net/ceph/messenger.o: warning: objtool: ceph_con_workfn()+0x47c: can't find switch jump table
Make objtool's find_jump_table() smart enough to distinguish between a
switch jump table (which has relocations to text addresses in the same
function as the original instruction) and other anonymous rodata (which
may have relocations to elsewhere).
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/485
Link: https://lkml.kernel.org/r/263f6aae46d33da0b86d7030ced878cb5cab1788.1581997059.git.jpoimboe@redhat.com
Libbpf's Travis CI tests caught this issue. Ensure bpf_link and bpf_object
clean up is performed correctly.
Fixes: d633d57902 ("selftest/bpf: Add test for allowed trampolines count")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20200220230546.769250-1-andriin@fb.com
Use the new bpf_program__set_attach_target() API in the xdp_bpf2bpf
selftest so it can be referenced as an example on how to use it.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/158220520562.127661.14289388017034825841.stgit@xdp-tutorial
Currently when you want to attach a trace program to a bpf program
the section name needs to match the tracepoint/function semantics.
However the addition of the bpf_program__set_attach_target() API
allows you to specify the tracepoint/function dynamically.
The call flow would look something like this:
xdp_fd = bpf_prog_get_fd_by_id(id);
trace_obj = bpf_object__open_file("func.o", NULL);
prog = bpf_object__find_program_by_title(trace_obj,
"fentry/myfunc");
bpf_program__set_expected_attach_type(prog, BPF_TRACE_FENTRY);
bpf_program__set_attach_target(prog, xdp_fd,
"xdpfilt_blk_all");
bpf_object__load(trace_obj)
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/158220519486.127661.7964708960649051384.stgit@xdp-tutorial
This commit enables the KCSAN Kconfig options that (1) detect data
races between reads and writes even when the writes do not change the
variable's value and (2) detect data races involving plain C-language
writes. These changes only affect scripted rcutorture runs and can be
overridden using the kvm.sh --kconfig argument.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, kvm-find-errors.sh gives a usage prompt when given a bad
directory, but then soldiers on, giving a series of confusing error
messages. This commit therefore prints an error message and exits when
given a bad directory, hopefully reducing confusion.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When running the default list of tests, the run summary of a successful
(that is, failed to find any errors) run fits easily on a 24-line screen.
But a run with something like "--configs '5*CFLIST'" will be 80 lines long,
and it is all too easy to miss a failure message when scrolling back.
This commit therefore prints out the number of runs with failing builds
or runtime failures, but only if there are any such failures.
For example, a run with a single build error and a single runtime error
would print two lines like this:
1 runs with build errors.
1 runs with runtime errors.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The small-system rcutorture configurations have served us well for a great
many years, but it is now time to add a larger one. This commit does
just that, but does not add it to the defaults in CFLIST. This allows
the kvm.sh argument '--configs "4*CFLIST TREE10" to run four instances
of each of the default configurations concurrently with one instance of
the large configuration.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The names of the per-test results directories are of the form
2019.11.29-20:42:19. This works, but the ":" characters make
tab-based shell name completion a bit onerous because the user must
remember to include a quote character somewhere before the first ":".
This commit therefore changes the ":" characters to periods, as in
2019.12.01-20.48.01", which allows tab-based completion to work more
naturally.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The bootparam_hotplug_cpu() bash function was checking for CPU-hotplug
kernel-boot parameters from --bootargs, but that check was specific to
rcutorture ("rcutorture\.onoff_"). This commit therefore makes this
check also work for locktorture ("torture\.onoff_").
Note that rcuperf does not do CPU-hotplug operations, so it is not
necessary to make a similar change for rcuperf.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reject if a value node is mixed with subkey node on same
parent key node.
A value node can not co-exist with subkey node under some key
node, e.g.
key = value
key.subkey = another-value
This is not be allowed because bootconfig API is not designed
to handle such case.
Link: http://lkml.kernel.org/r/158220115232.26565.7792340045009731803.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Remove error message silent knob, we don't need it anymore
because we can check if there is a bootconfig by checking
the magic word.
If there is a magic word, but failed to load a bootconfig
from initrd, there is a real problem.
Link: http://lkml.kernel.org/r/158220113256.26565.14264598654427773104.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add bootconfig magic word to the end of bootconfig on initrd
image for indicating explicitly the bootconfig is there.
Also tools/bootconfig treats wrong size or wrong checksum or
parse error as an error, because if there is a bootconfig magic
word, there must be a bootconfig.
The bootconfig magic word is "#BOOTCONFIG\n", 12 bytes word.
Thus the block image of the initrd file with bootconfig is
as follows.
[Initrd][bootconfig][size][csum][#BOOTCONFIG\n]
Link: http://lkml.kernel.org/r/158220112263.26565.3944814205960612841.stgit@devnote2
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If BPF program is using BTF-defined maps, BTF is required only for
libbpf itself to process map definitions. If after that BTF fails to
be loaded into kernel (e.g., if it doesn't support BTF at all), this
shouldn't prevent valid BPF program from loading. Existing
retry-without-BTF logic for creating maps will succeed to create such
maps without any problems. So, presence of .maps section shouldn't make
BTF required for kernel. Update the check accordingly.
Validated by ensuring simple BPF program with BTF-defined maps is still
loaded on old kernel without BTF support and map is correctly parsed and
created.
Fixes: abd29c9314 ("libbpf: allow specifying map definitions using BTF")
Reported-by: Julia Kartseva <hex@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200220062635.1497872-1-andriin@fb.com
Currently if you build with O=... the rseq tests don't build:
$ make O=$PWD/output -C tools/testing/selftests/ TARGETS=rseq
make: Entering directory '/linux/tools/testing/selftests'
...
make[1]: Entering directory '/linux/tools/testing/selftests/rseq'
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ -shared -fPIC rseq.c -lpthread -o /linux/output/rseq/librseq.so
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ basic_test.c -lpthread -lrseq -o /linux/output/rseq/basic_test
/usr/bin/ld: cannot find -lrseq
collect2: error: ld returned 1 exit status
This is because the library search path points to the source
directory, not the output.
We can fix it by changing the library search path to $(OUTPUT).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second
timeout per test") added a 45 second timeout for tests, and also added
a way for tests to customise the timeout via a settings file.
For example the ftrace tests take multiple minutes to run, so they
were given longer in commit b43e78f65b ("tracing/selftests: Turn off
timeout setting").
This works when the tests are run from the source tree. However if the
tests are installed with "make -C tools/testing/selftests install",
the settings files are not copied into the install directory. When the
tests are then run from the install directory the longer timeouts are
not applied and the tests timeout incorrectly.
So add the settings files to TEST_FILES of the appropriate Makefiles
to cause the settings files to be installed using the existing install
logic.
Fixes: 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This Kselftest update for Linux 5.6-rc3 consists of fixes to build
failures and other test bugs.
-----BEGIN PGP SIGNATURE-----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=OFRu
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to build failures and other test bugs"
* tag 'linux-kselftest-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: openat2: fix build error on newer glibc
selftests: use LDLIBS for libraries instead of LDFLAGS
selftests: fix too long argument
selftests: allow detection of build failures
Kernel selftests: tpm2: check for tpm support
selftests/ftrace: Have pid filter test use instance flag
selftests: fix spelling mistaked "chaigned" -> "chained"
Alexei Starovoitov says:
====================
pull-request: bpf 2020-02-19
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 10 day(s) which contain
a total of 10 files changed, 93 insertions(+), 31 deletions(-).
The main changes are:
1) batched bpf hashtab fixes from Brian and Yonghong.
2) various selftests and libbpf fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Added tests for 'u32' extended match rules for u8 alignment.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The selftests fails to build with:
tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c: In function ‘test_sockmap_ktls_disconnect_after_delete’:
tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c:72:37: error: ‘TCP_ULP’ undeclared (first use in this function)
72 | err = setsockopt(cli, IPPROTO_TCP, TCP_ULP, "tls", strlen("tls"));
| ^~~~~~~
Similar to commit that fixes build of sockmap_basic.c on systems with old
/usr/include fix the build of sockmap_ktls.c
Fixes: d1ba1204f2 ("selftests/bpf: Test unhashing kTLS socket after removing from map")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200219205514.3353788-1-ast@kernel.org
The latest llvm supports cpu version v3, which is cpu version v1
plus some additional 64bit jmp insns and 32bit jmp insn support.
In selftests/bpf Makefile, the llvm flag -mcpu=probe did runtime
probe into the host system. Depending on compilation environments,
it is possible that runtime probe may fail, e.g., due to
memlock issue. This will cause generated code with cpu version v1.
This may cause confusion as the same compiler and the same C code
generates different byte codes in different environment.
Let us change the llvm flag -mcpu=probe to -mcpu=v3 so the
generated code will be the same regardless of the compilation
environment.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200219004236.2291125-1-yhs@fb.com
Add a selftest to test:
* default bpf_read_branch_records() behavior
* BPF_F_GET_BRANCH_RECORDS_SIZE flag behavior
* error path on non branch record perf events
* using helper to write to stack
* using helper to write to global
On host with hardware counter support:
# ./test_progs -t perf_branches
#27/1 perf_branches_hw:OK
#27/2 perf_branches_no_hw:OK
#27 perf_branches:OK
Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED
On host without hardware counter support (VM):
# ./test_progs -t perf_branches
#27/1 perf_branches_hw:OK
#27/2 perf_branches_no_hw:OK
#27 perf_branches:OK
Summary: 1/2 PASSED, 1 SKIPPED, 0 FAILED
Also sync tools/include/uapi/linux/bpf.h.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200218030432.4600-3-dxu@dxuuu.xyz
Implemented small fix so that the script changes work directories to the
root of the linux kernel source tree from which kunit.py is run. This
enables the user to run kunit from any working directory. Originally
considered using os.path.join but this is more error prone as we would
have to find all file path usages and modify them accordingly. Using
os.chdir ensures that the entire script is run within /linux.
Signed-off-by: Heidi Fahim <heidifahim@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Previous error message for invalid kunitconfig was vague. Added to it so
that it lists invalid fields and prompts for them to be removed. Added
validate_config function returning whether or not this kconfig is valid.
Signed-off-by: Heidi Fahim <heidifahim@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When a TCP socket gets inserted into a sockmap, its sk_prot callbacks get
replaced with tcp_bpf callbacks built from regular tcp callbacks. If TLS
gets enabled on the same socket, sk_prot callbacks get replaced once again,
this time with kTLS callbacks built from tcp_bpf callbacks.
Now, we allow removing a socket from a sockmap that has kTLS enabled. After
removal, socket remains with kTLS configured. This is where things things
get tricky.
Since the socket has a set of sk_prot callbacks that are a mix of kTLS and
tcp_bpf callbacks, we need to restore just the tcp_bpf callbacks to the
original ones. At the moment, it comes down to the the unhash operation.
We had a regression recently because tcp_bpf callbacks were not cleared in
this particular scenario of removing a kTLS socket from a sockmap. It got
fixed in commit 4da6a196f9 ("bpf: Sockmap/tls, during free we may call
tcp_bpf_unhash() in loop").
Add a test that triggers the regression so that we don't reintroduce it in
the future.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200217121530.754315-4-jakub@cloudflare.com
The EDID files are not really documentation.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
When a kernel is configured without CONFIG_DEV_DAX_PMEM_COMPAT, the
compilation of tools/testing/nvdimm fails with:
Building modules, stage 2.
MODPOST 11 modules
ERROR: "dax_pmem_compat_test" [tools/testing/nvdimm/test/nfit_test.ko] undefined!
Fix the problem by calling dax_pmem_compat_test() only if the kernel has
the required functionality.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200123154720.12097-1-jack@suse.cz
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Copy over powerpc syscall.tbl to grab changes from the below commits
fddb5d430a ("open: introduce openat2(2) syscall")
9a2cef09c8 ("arch: wire up pidfd_getfd syscall")
Now 'perf trace' on powerpc will be able to map from those syscall
strings to the right syscall numbers, i.e.
perf trace -e pidfd*
Will include 'pidfd_getfd' as well as:
perf trace open*
Will cover all 'open' variants.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kernel only accepts map names with alphanumeric characters, underscores
and periods in their name. However, the auto-generated internal map names
used by libbpf takes their prefix from the user-supplied BPF object name,
which has no such restriction. This can lead to "Invalid argument" errors
when trying to load a BPF program using global variables.
Fix this by sanitising the map names, replacing any non-allowed characters
with underscores.
Fixes: d859900c4c ("bpf, libbpf: support global data/bss/rodata sections")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200217171701.215215-1-toke@redhat.com
The performance of bpf_redirect() is now roughly the same as that of
bpf_redirect_map(). However, David Ahern pointed out that the header file
has not been updated to reflect this, and still says that a significant
performance increase is possible when using bpf_redirect_map(). Remove this
text from the bpf_redirect_map() description, and reword the description in
bpf_redirect() slightly. Also fix the 'Return' section of the
bpf_redirect_map() documentation.
Fixes: 1d233886dd ("xdp: Use bulking for non-map XDP_REDIRECT and consolidate code paths")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200218130334.29889-1-toke@redhat.com
All ->read_finish() implementations are doing the same thing. Add a
helper function so that they can share the same implementation.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Wei Li <liwei391@huawei.com>
Link: http://lore.kernel.org/lkml/20200217082300.6301-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.
While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be
endless.
If the event is disabled, don't enable it again here.
Based-on-patch-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.
While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be
endless.
If the cs_etm event is disabled, we don't enable it again here.
Note: This patch is NOT tested since i don't have such a machine with
coresight feature, but the code seems buggy same as arm-spe and
intel-pt.
Tester notes:
Thanks for looping, Adrian. Applied this patch and tested with
CoreSight on juno board, it works well.
Signed-off-by: Wei Li <liwei391@huawei.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-4-adrian.hunter@intel.com
[ahunter: removed redundant 'else' after 'return']
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.
While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be
endless.
If the intel_bts event is disabled, we don't enable it again here.
Note: This patch is NOT tested since i don't have such a machine with
intel_bts feature, but the code seems buggy same as arm-spe and
intel-pt.
Signed-off-by: Wei Li <liwei391@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-3-adrian.hunter@intel.com
[ahunter: removed redundant 'else' after 'return']
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.
While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be endless.
If the intel_pt event is disabled, we don't enable it again here.
Before the patch:
huawei@huawei-2288H-V5:~/linux-5.5-rc4/tools/perf$ ./perf record -e \
intel_pt//u -p 46803
^C^C^C^C^C^C
After the patch:
huawei@huawei-2288H-V5:~/linux-5.5-rc4/tools/perf$ ./perf record -e \
intel_pt//u -p 48591
^C[ perf record: Woken up 0 times to write data ]
Warning:
AUX data lost 504 times out of 4816!
[ perf record: Captured and wrote 2024.405 MB perf.data ]
Signed-off-by: Wei Li <liwei391@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-2-adrian.hunter@intel.com
[ ahunter: removed redundant 'else' after 'return' ]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This test places a kprobe to function getname_flags() in the kernel
which has the following prototype:
struct filename *getname_flags(const char __user *filename, int flags, int *empty)
The 'filename' argument points to a filename located in user space memory.
Looking at commit 88903c4643 ("tracing/probe: Add ustring type for
user-space string") the kprobe should indicate that user space memory is
accessed.
Output before:
[root@m35lp76 perf]# ./perf test 66 67
66: Use vfs_getname probe to get syscall args filenames : FAILED!
67: Check open filename arg using perf trace + vfs_getname: FAILED!
[root@m35lp76 perf]#
Output after:
[root@m35lp76 perf]# ./perf test 66 67
66: Use vfs_getname probe to get syscall args filenames : Ok
67: Check open filename arg using perf trace + vfs_getname: Ok
[root@m35lp76 perf]#
Comments from Masami Hiramatsu:
This bug doesn't happen on x86 or other archs on which user address
space and kernel address space is the same. On some arches (ppc64 in
this case?) user address space is partially or completely the same as
kernel address space.
(Yes, they switch the world when running into the kernel) In this case,
we need to use different data access functions for each space.
That is why I introduced the "ustring" type for kprobe events.
As far as I can see, Thomas's patch is sane. Thomas, could you show us
your result on your test environment?
Comments from Thomas Richter:
Test results for s/390 included above.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200217102111.61137-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bpf.h file needed gets installed in /usr/lib/include/perf/bpf/bpf.h,
and /usr/lib/include/perf/ is added to the include path passed to clang
to build the eBPF bytecode, so just remove "bpf/", its directly in the
path passed already. This was working by accident, fix it.
I.e. now this is back working:
# cat /home/acme/git/perf/tools/perf/examples/bpf/hello.c
#include <stdio.h>
int syscall_enter(openat)(void *args)
{
puts("Hello, world\n");
return 0;
}
license(GPL);
# perf trace -e /home/acme/git/perf/tools/perf/examples/bpf/hello.c
0.000 pickup/21493 __bpf_stdout__(Hello, world)
56.462 sh/13539 __bpf_stdout__(Hello, world)
56.536 sh/13539 __bpf_stdout__(Hello, world)
56.673 sh/13539 __bpf_stdout__(Hello, world)
56.781 sh/13539 __bpf_stdout__(Hello, world)
56.707 perf/13182 __bpf_stdout__(Hello, world)
56.849 perf/13182 __bpf_stdout__(Hello, world)
^C
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-d9myswhgo8gfi3vmehdqpxa7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
0x11 and 0x12 set the ECN bits based on RFC2474, it would be better to avoid
that. 0x14 and 0x18 would be better and works as well.
Reported-by: Petr Machata <petrm@mellanox.com>
Fixes: 4e867c9a50 ("selftests: forwarding: vxlan_bridge_1d: fix tos value")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when two VXLAN tunnels with conflicting configurations (i.e.,
different TTL) are enslaved to the same VLAN-aware bridge, then the
enslavement of a port to the bridge is denied.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After recent changes, the VXLAN tunnel will be offloaded regardless if
any local ports are member in the FID or not. Adjust the test to make
sure the tunnel is offloaded in this case.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver supports a single VLAN-aware bridge. Test that the
enslavement of a port to the second VLAN-aware bridge fails with an
extack.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that creation of a bridge (both VLAN-aware and VLAN-unaware) fails
with an extack when a VXLAN device with an unsupported configuration is
already enslaved to it.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The addition of a VLAN on a bridge slave prompts the driver to have the
local port in question join the FID corresponding to this VLAN.
Before recent changes, the operation of joining the FID would also mean
that the driver would enable VXLAN tunneling if a VXLAN device was also
member in the VLAN. In case the configuration of the VXLAN tunnel was
not supported, an extack error would be returned.
Since the operation of joining the FID no longer means that VXLAN
tunneling is potentially enabled, the test is no longer relevant. Remove
it.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This gives us fewer dependencies and shortens build time, fixes up some
hash checking race conditions, and also fixes missing directory creation
that caused issues on massively parallel builds.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever the server side of vsock is binding to the socket, but not
listening yet, we expect the behavior from the client to be identical to
what happens when the server is not even started.
This new test runs the server side so that it binds to the socket
without ever listening to it. The client side will try to connect and
should receive an ECONNRESET error.
This new test provides a way to validate the previously introduced patch
for making sure the server side will always answer with a RST packet in
case the client requested a new connection.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 71130f2997 ("vxlan: fix tos value before xmit") we start
strict vxlan xmit tos value by RT_TOS(), which limits the tos value less
than 0x1E. With current value 0x40 the test will failed with "v1: Expected
to capture 10 packets, got 0". So let's choose a smaller tos value for
testing.
Fixes: d417ecf533 ("selftests: forwarding: vxlan_bridge_1d: Add a TOS test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 2759647247 ("ipv6: fix ECMP route replacement") it is no
longer possible to replace an ECMP-able route by a non ECMP-able route.
For example,
ip route add 2001:db8::1/128 via fe80::1 dev dummy0
ip route replace 2001:db8::1/128 dev dummy0
does not work as expected.
Tweak the replacement logic so that point 3 in the log of the above commit
becomes:
3. If the new route is not ECMP-able, and no matching non-ECMP-able route
exists, replace matching ECMP-able route (if any) or add the new route.
We can now summarize the entire replace semantics to:
When doing a replace, prefer replacing a matching route of the same
"ECMP-able-ness" as the replace argument. If there is no such candidate,
fallback to the first route found.
Fixes: 2759647247 ("ipv6: fix ECMP route replacement")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
For tc ip_proto filter, when we extract the flow via __skb_flow_dissect()
without flag FLOW_DISSECTOR_F_STOP_AT_ENCAP, we will continue extract to
the inner proto.
So for GRE + ICMP messages, we should not track GRE proto, but inner ICMP
proto.
For test mirror_gre.sh, it may make user confused if we capture ICMP
message on $h3(since the flow is GRE message). So I move the capture
dev to h3-gt{4,6}, and only capture ICMP message.
Before the fix:
]# ./mirror_gre.sh
TEST: ingress mirror to gretap (skip_hw) [ OK ]
TEST: egress mirror to gretap (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap (skip_hw) [ OK ]
TEST: ingress mirror to gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: egress mirror to gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [FAIL]
Expected to capture 10 packets, got 0.
TEST: two simultaneously configured mirrors (skip_hw) [ OK ]
WARN: Could not test offloaded functionality
After fix:
]# ./mirror_gre.sh
TEST: ingress mirror to gretap (skip_hw) [ OK ]
TEST: egress mirror to gretap (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap (skip_hw) [ OK ]
TEST: ingress mirror to gretap: envelope MAC (skip_hw) [ OK ]
TEST: egress mirror to gretap: envelope MAC (skip_hw) [ OK ]
TEST: ingress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ]
TEST: egress mirror to ip6gretap: envelope MAC (skip_hw) [ OK ]
TEST: two simultaneously configured mirrors (skip_hw) [ OK ]
WARN: Could not test offloaded functionality
Fixes: ba8d39871a ("selftests: forwarding: Add test for mirror to gretap")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <pmachata@gmail.com>
Tested-by: Petr Machata <pmachata@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KVM documentation to rst format, which was very welcome.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeRYe2AAoJEL/70l94x66DSdsH/31rMoISGbPReQNKDZtondwr
UNLYHBLau46OR5JiLaKDqRODi12CXwrB6KZyRtQg+PeU/aCaFqW09kDOtMdV4AMl
2bEl4VfUuClsGXBQL5WWsb+adaWxHBtRFPcaT0xMAE+JXxAvt2o7rstOydM4yB9f
vM9TqEP+oVGyqx0FsuCND+zu/qZqNOOqJ1eZCrzqZKwFS8lrjsYtBG4K8rfnvXnI
uGxFnbmZuJKpXpRgCebDdB98m0KEWfAs0S8aOO4NRfmymUBcjMeIeqQz0Mnt17xJ
Fz0KktwdGL28qJ+fnE51i/IBqCoBJL2BmIesSiGKVr1alpHA1ngKvUmcbtHkAXw=
=To92
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bugfixes and improvements to selftests.
On top of this, Mauro converted the KVM documentation to rst format,
which was very welcome"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
docs: virt: guest-halt-polling.txt convert to ReST
docs: kvm: review-checklist.txt: rename to ReST
docs: kvm: Convert timekeeping.txt to ReST format
docs: kvm: Convert s390-diag.txt to ReST format
docs: kvm: Convert ppc-pv.txt to ReST format
docs: kvm: Convert nested-vmx.txt to ReST format
docs: kvm: Convert mmu.txt to ReST format
docs: kvm: Convert locking.txt to ReST format
docs: kvm: Convert hypercalls.txt to ReST format
docs: kvm: arm/psci.txt: convert to ReST
docs: kvm: convert arm/hyp-abi.txt to ReST
docs: kvm: Convert api.txt to ReST format
docs: kvm: convert devices/xive.txt to ReST
docs: kvm: convert devices/xics.txt to ReST
docs: kvm: convert devices/vm.txt to ReST
docs: kvm: convert devices/vfio.txt to ReST
docs: kvm: convert devices/vcpu.txt to ReST
docs: kvm: convert devices/s390_flic.txt to ReST
docs: kvm: convert devices/mpic.txt to ReST
docs: kvm: convert devices/arm-vgit.txt to ReST
...
Pull perf fixes from Ingo Molnar:
"Fixes and HW enablement patches:
- Tooling fixes, most of which are tooling header synchronization
with v5.6 changes
- Fix kprobes fallout on ARM
- Add Intel Elkhart Lake support and extend Tremont support, these
are relatively simple and should only affect those models
- Fix the AMD family 17h generic event table"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
perf llvm: Fix script used to obtain kernel make directives to work with new kbuild
tools headers kvm: Sync linux/kvm.h with the kernel sources
tools headers kvm: Sync kvm headers with the kernel sources
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
tools headers x86: Sync disabled-features.h
tools include UAPI: Sync sound/asound.h copy
tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
perf tools: Add arm64 version of get_cpuid()
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers uapi: Sync linux/fscrypt.h with the kernel sources
tools headers UAPI: Sync sched.h with the kernel
perf trace: Resolve prctl's 'option' arg strings to numbers
perf beauty prctl: Export the 'options' strarray
tools headers UAPI: Sync prctl.h with the kernel sources
tools headers UAPI: Sync copy of arm64's asm/unistd.h with the kernel sources
perf maps: Move kmap::kmaps setup to maps__insert()
perf maps: Fix map__clone() for struct kmap
perf maps: Mark ksymbol DSOs with kernel type
perf maps: Mark module DSOs with kernel type
tools include UAPI: Sync x86's syscalls_64.tbl, generic unistd.h and fcntl.h to pick up openat2 and pidfd_getfd
...
Pull networking fixes from David Miller:
1) Fix interrupt name truncation in mv88e6xxx dsa driver, from Andrew
Lunn.
2) Process generic XDP even if SKB is cloned, from Toke Høiland-Jørgensen.
3) Fix leak of kernel memory to userspace in smc, from Eric Dumazet.
4) Add some missing netlink attribute validation to matchall and
flower, from Davide Caratti.
5) Send icmp responses properly when NAT has been applied to the frame
before we get to the tunnel emitting the icmp, from Jason Donenfeld.
6) Make sure there is enough SKB headroom when adding dsa tags for qca
and ar9331. From Per Forlin.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
netdevice.h: fix all kernel-doc and Sphinx warnings
net: dsa: tag_ar9331: Make sure there is headroom for tag
net: dsa: tag_qca: Make sure there is headroom for tag
net, ip6_tunnel: enhance tunnel locate with link check
net/smc: no peer ID in CLC decline for SMCD
net/smc: transfer fasync_list in case of fallback
net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples()
net: hns3: fix VF bandwidth does not take effect in some case
net: hns3: add management table after IMP reset
mac80211: fix wrong 160/80+80 MHz setting
cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE
xfrm: interface: use icmp_ndo_send helper
wireguard: device: use icmp_ndo_send helper
sunvnet: use icmp_ndo_send helper
gtp: use icmp_ndo_send helper
icmp: introduce helper for nat'd source address in network device context
net/sched: flower: add missing validation of TCA_FLOWER_FLAGS
net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS
net/flow_dissector: remove unexist field description
page_pool: refill page when alloc.count of pool is zero
...
Before this patch:
# ./perf test 39 41
39: LLVM search and compile :
39.1: Basic BPF llvm compile : Ok
39.2: kbuild searching : FAILED!
39.3: Compile source for BPF prologue generation : Skip
39.4: Compile source for BPF relocation : Skip
41: BPF filter :
41.1: Basic BPF filtering : Ok
41.2: BPF pinning : Ok
41.3: BPF prologue generation : FAILED!
41.4: BPF relocation checker : Skip
#
Using 'perf test -v' for these tests shows that it is not finding
uapi/linux/fs.h, which ends up being because we don't setup the right header
path. Fix it.
After this patch:
# perf test 39 41
39: LLVM search and compile :
39.1: Basic BPF llvm compile : Ok
39.2: kbuild searching : Ok
39.3: Compile source for BPF prologue generation : Ok
39.4: Compile source for BPF relocation : Ok
41: BPF filter :
41.1: Basic BPF filtering : Ok
41.2: BPF pinning : Ok
41.3: BPF prologue generation : Ok
41.4: BPF relocation checker : Ok
#
Longer description:
In llvm-utils.c we use some techniques to obtain the kbuild make
directives and that recently stopped working as now 'ar' gets called and
expects to find the dummy.o used to echo these variables:
$(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS)
Add the $(CC) line to satisfy that, making sure this works with all
kernels, i.e. preserving the temp directory and files in it used for
this technique we can see that it works everywhere:
# make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ clean
# ls -la /tmp/tmp.qgaFHgxjZ4/
total 4
drwx------. 2 root root 80 Feb 14 09:42 .
drwxrwxrwt. 47 root root 1200 Feb 14 09:42 ..
-rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c
-rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile
#
# cat /tmp/tmp.qgaFHgxjZ4/Makefile
obj-y := dummy.o
$(obj)/%.o: $(src)/%.c
@echo -n "$(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS)"
$(CC) -c -o $@ $<
#
Then build with an old kernel Makefile:
# make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ dummy.o
-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/9/include -I./arch/x86/include -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h
#
# ls -la /tmp/tmp.qgaFHgxjZ4/
total 8
drwx------. 2 root root 100 Feb 14 09:43 .
drwxrwxrwt. 47 root root 1200 Feb 14 09:43 ..
-rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c
-rw-r--r--. 1 root root 936 Feb 14 09:43 dummy.o
-rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile
#
And a new one:
# make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ clean
# ls -la /tmp/tmp.qgaFHgxjZ4/
total 4
drwx------. 2 root root 80 Feb 14 09:43 .
drwxrwxrwt. 47 root root 1200 Feb 14 09:43 ..
-rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c
-rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile
# make -s -C /lib/modules/5.6.0-rc1+/build M=/tmp/tmp.qgaFHgxjZ4/ dummy.o
-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/9/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h
#
# ls -la /tmp/tmp.qgaFHgxjZ4/
total 16
drwx------. 2 root root 160 Feb 14 09:44 .
drwxrwxrwt. 47 root root 1200 Feb 14 09:44 ..
-rw-r--r--. 1 root root 158 Feb 14 09:44 built-in.a
-rw-r--r--. 1 root root 149 Feb 14 09:44 .built-in.a.cmd
-rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c
-rw-r--r--. 1 root root 936 Feb 14 09:44 dummy.o
-rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile
-rw-r--r--. 1 root root 0 Feb 14 09:44 modules.order
#
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: https://www.spinics.net/lists/linux-perf-users/msg10600.html
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because wireguard is calling icmp from network device context, it should
use the ndo helper so that the rate limiting applies correctly. This
commit adds a small test to the wireguard test suite to ensure that the
new functions continue doing the right thing in the context of
wireguard. It does this by setting up a condition that will definately
evoke an icmp error message from the driver, but along a nat'd path.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It appears that newer glibcs check that openat(O_CREAT) was provided a
fourth argument (rather than passing garbage), resulting in the
following build error:
> In file included from /usr/include/fcntl.h:301,
> from helpers.c:9:
> In function 'openat',
> inlined from 'touchat' at helpers.c:49:11:
> /usr/include/x86_64-linux-gnu/bits/fcntl2.h:126:4: error: call to
> '__openat_missing_mode' declared with attribute error: openat with O_CREAT
> or O_TMPFILE in third argument needs 4 arguments
> 126 | __openat_missing_mode ();
> | ^~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
While building selftests, the following errors were observed:
> tools/testing/selftests/timens'
> gcc -Wall -Werror -pthread -lrt -ldl timens.c -o tools/testing/selftests/timens/timens
> /usr/bin/ld: /tmp/ccGy5CST.o: in function `check_config_posix_timers':
> timens.c:(.text+0x65a): undefined reference to `timer_create'
> collect2: error: ld returned 1 exit status
Quoting commit 870f193d48 ("selftests: net: use LDLIBS instead of
LDFLAGS"):
The default Makefile rule looks like:
$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)
When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.
More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.
LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.
While at here, correct other selftests, not only timens ones.
Reported-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In the current code, it only removes "include/linux/spi/spidev.h" file
when make clean and there still exists useless "include/linux/spi/"
directory, just remove it.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1581567368-8055-4-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
It is better to use perror() only if errno is not 0, it should use printf()
when errno is 0, otherwise there exists redudant ": Success".
E.g. without this patch:
$ ./spidev_test -p 1234 --input test.bin
only one of -p and --input may be selected: Success
Aborted (core dumped)
With this patch:
$ ./spidev_test -p 1234 --input test.bin
only one of -p and --input may be selected
Aborted (core dumped)
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1581567368-8055-3-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
It is better to check input_tx and input_file first after parse options.
Otherwise, it will do some useless operations when both -p and --input
are selected.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1581567368-8055-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
When call print_usage() in parse_opts(), it will exit directly.
Since break is not useful after exit statement, remove it.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1581567368-8055-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Expand the cgroup test-suite to include tests for CLONE_INTO_CGROUP.
This adds the following tests:
- CLONE_INTO_CGROUP manages to clone a process directly into a correctly
delegated cgroup
- CLONE_INTO_CGROUP fails to clone a process into a cgroup that has been
removed after we've opened an fd to it
- CLONE_INTO_CGROUP fails to clone a process into an invalid domain
cgroup
- CLONE_INTO_CGROUP adheres to the no internal process constraint
- CLONE_INTO_CGROUP works with the freezer feature
Cc: Tejun Heo <tj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: cgroups@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add new test to verify that a cgroup with dead processes can be destroyed.
The test spawns a child process which allocates and touches 100MB of RAM
to ensure prolonged exit. Subsequently it kills the child, waits until
the cgroup containing the child is empty and destroys the cgroup.
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
[mkoutny@suse.com: Fix typo in test_cgcore_destroy comment]
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
x86_register enum is not used, let's remove it.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
L2 guest calls vmcall and L1 checks the exit status does
correspond.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Tested-by: Wei Huang <wei.huang2@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the basic infrastructure needed to test AMD nested SVM.
This is largely copied from the KVM unit test infrastructure.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
get_gdt_base() and get_idt_base() only return the base address
of the descriptor tables. Soon we will need to get the size as well.
Change the prototype of those functions so that they return
the whole desc_ptr struct instead of the address field.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Wei Huang <wei.huang2@amd.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SYN cookie test with reuseport BPF doesn't make sense for UDP sockets. We
don't run it but the test_progs test runner doesn't know about it. Mark the
test as skipped so the test_progs can report correctly how many tests were
skipped.
Fixes: 7ee0d4e97b ("selftests/bpf: Switch reuseport tests for test_progs framework")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200212103208.438419-1-jakub@cloudflare.com
There is a typo in checking the "saved_tcp_fo" and instead
"saved_tcp_syncookie" is checked again. This patch fixes it
and also breaks them into separate if statements such that
the test will abort asap.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200211175910.3235321-1-kafai@fb.com
To pick up the changes from:
7de3f1423f ("KVM: s390: Add new reset vcpu API")
So far we're ignoring those arch specific ioctls, we need to revisit
this at some time to have arch specific tables, etc:
$ grep S390 tools/perf/trace/beauty/kvm_ioctl.sh
egrep -v " ((ARM|PPC|S390)_|[GS]ET_(DEBUGREGS|PIT2|XSAVE|TSC_KHZ)|CREATE_SPAPR_TCE_64)" | \
$
This addresses these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h'
diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from:
290a6bb06d ("arm64: KVM: Add UAPI notes for swapped registers")
No tools changes are caused by this.
This addresses these tools/perf build warnings:
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrew Jones <drjones@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from:
85c17291e2 ("x86/cpufeatures: Add flag to track whether MSR IA32_FEAT_CTL is configured")
f444a5ff95 ("x86/cpufeatures: Add support for fast short REP; MOVSB")
These don't cause any changes in tooling, just silences this perf build
warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To silence the following tools/perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
Picking up the changes in:
45fc24e89b ("x86/mpx: remove MPX from arch/x86")
that didn't entail any functionality change in the tooling side.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
46b770f720 ("ALSA: uapi: Fix sparse warning")
a103a39899 ("ALSA: control: Fix incompatible protocol error")
bd3eb4e87e ("ALSA: ctl: bump protocol version up to v2.1.0")
ff16351e3f ("ALSA: ctl: remove dimen member from elem_info structure")
5422835666 ("ALSA: ctl: remove unused macro for timestamping of elem_value")
7fd7d6c504 ("ALSA: uapi: Fix typos and header inclusion in asound.h")
1cfaef9617 ("ALSA: bump uapi version numbers")
80fe7430c7 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control")
07094ae6f9 ("ALSA: Avoid using timespec for struct snd_timer_tread")
d9e5582c4b ("ALSA: Avoid using timespec for struct snd_rawmidi_status")
3ddee7f88a ("ALSA: Avoid using timespec for struct snd_pcm_status")
a4e7dd35b9 ("ALSA: Avoid using timespec for struct snd_ctl_elem_value")
a07804cc74 ("ALSA: Avoid using timespec for struct snd_timer_status")
Which entails no changes in the tooling side.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
d41938d2cb ("mm: Reserve asm-generic prot flags 0x10 and 0x20 for arch use")
No changes in tooling, just a rebuild as files needed got touched.
This addresses the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an arm64 version of get_cpuid(), which is used for various annotation
and headers - for example, I now get the CPUID in "perf report --header",
as shown in this snippet:
# hostname : ubuntu
# os release : 5.5.0-rc1-dirty
# perf version : 5.5.rc1.gbf8a13dc9851
# arch : aarch64
# nrcpus online : 96
# nrcpus avail : 96
# cpuid : 0x00000000480fd010
Since much of the code to read the MIDR is already in get_cpuid_str(),
factor out this code.
Tester notes:
I tested this patch on my new ARM64 Kunpeng 920 server.
[root@node1 zsk]# ./perf --version
perf version 5.6.rc1.g2cdb955b7252
Both perf list and perf stat can work.
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1576245255-210926-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the change in:
cc662126b4 ("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET")
That don't result in any changes in tooling, just silences this perf
build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
e933adde6f ("fscrypt: include <linux/ioctl.h> in UAPI header")
93edd392ca ("fscrypt: support passing a keyring key to FS_IOC_ADD_ENCRYPTION_KEY")
That don't trigger any changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h'
diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a simple program that allows to test the new LINECHANGED_FD ioctl().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- Fix an uninitialized variable
- Fix compile bug to bootconfig userspace tool (in tools directory)
- Suppress some error messages of bootconfig userspace tool
- Remove unneded CONFIG_LIBXBC from bootconfig
- Allocate bootconfig xbc_nodes dynamically.
To ease complaints about taking up static memory at boot up
- Use of parse_args() to parse bootconfig instead of strstr() usage
Prevents issues of double quotes containing the interested string
- Fix missing ring_buffer_nest_end() on synthetic event error path
- Return zero not -EINVAL on soft disabled synthetic event
(soft disabling must be the same as hard disabling, which returns zero)
- Consolidate synthetic event code (remove duplicate code)
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXkMTwRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnJQAQD5aKiD6jx+zGtLsFTuZMcEGvhhUuJ6
oUaSvhKO3UqezwD/V5avKuuC0wWt//gOWDY+0+4QNjmvn1GLnaNYohs6fg0=
=NLT9
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fixes:
- Fix an uninitialized variable
- Fix compile bug to bootconfig userspace tool (in tools directory)
- Suppress some error messages of bootconfig userspace tool
- Remove unneded CONFIG_LIBXBC from bootconfig
- Allocate bootconfig xbc_nodes dynamically. To ease complaints about
taking up static memory at boot up
- Use of parse_args() to parse bootconfig instead of strstr() usage
Prevents issues of double quotes containing the interested string
- Fix missing ring_buffer_nest_end() on synthetic event error path
- Return zero not -EINVAL on soft disabled synthetic event (soft
disabling must be the same as hard disabling, which returns zero)
- Consolidate synthetic event code (remove duplicate code)"
* tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Consolidate trace() functions
tracing: Don't return -EINVAL when tracing soft disabled synth events
tracing: Add missing nest end to synth_event_trace_start() error case
tools/bootconfig: Suppress non-error messages
bootconfig: Allocate xbc_nodes array dynamically
bootconfig: Use parse_args() to find bootconfig and '--'
tracing/kprobe: Fix uninitialized variable bug
bootconfig: Remove unneeded CONFIG_LIBXBC
tools/bootconfig: Fix wrong __VA_ARGS__ usage
To get the changes in:
769071ac9f ("ns: Introduce Time Namespace")
Silencing this tools/perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h'
diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h
Which enables 'perf trace' to decode the CLONE_NEWTIME bit in the
'flags' argument to the clone syscalls.
Example of clone flags being decoded:
[root@quaco ~]# perf trace -e clone*
0.000 qemu-system-x8/23923 clone(clone_flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, newsp: 0x7f0dad7f9870, parent_tidptr: 0x7f0dad7fa9d0, child_tidptr: 0x7f0dad7fa9d0, tls: 0x7f0dad7fa700) = 6806 (qemu-system-x86)
? qemu-system-x8/6806 ... [continued]: clone()) = 0
^C[root@quaco ~]#
At some point this should enable things like:
# perf trace -e 'clone*/clone_flags&NEWTIME/'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrei Vagin <avagin@openvz.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
# perf trace -e syscalls:sys_enter_prctl --filter="option==SET_NAME"
0.000 Socket Thread/3860 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7fc50b9733e8)
0.053 SSL Cert #78/3860 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7fc50b9733e8)
^C #
If one uses '-v' with 'perf trace', we can see the filter it puts in
place:
New filter for syscalls:sys_enter_prctl: (option==0xf) && (common_pid != 3859 && common_pid != 2757)
We still need to allow using plain '-e prctl' and have this turn into
creating a 'syscalls:sys_enter_prctl' event so that the filter can be
applied only to it as right now '-e prctl' ends up using the
'raw_syscalls:sys_enter/sys_exit'.
The end goal is to have something like:
# perf trace -e prctl/option==SET_NAME/
And have that use tracepoint filters or eBPF ones.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can use it with strtoul, allowing string to number
conversions in filter expressions.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
3e3c8ca5a3 ("arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headers")
Silencing this tools/perf/ build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/unistd.h' differs from latest version at 'arch/arm64/include/uapi/asm/unistd.h'
diff -u tools/arch/arm64/include/uapi/asm/unistd.h arch/arm64/include/uapi/asm/unistd.h
Which will probably end up enabling the use of "clone3" in 'perf trace -e',
haven't checked the build with this change on an arm64 system.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Amanieu d'Antras <amanieu@gmail.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So the kmaps pointer setup is centralized and we do not need to update
it in all those places (2 current places and few more missing) after
calling maps__insert().
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200210143218.24948-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The map__clone() function can be called on kernel maps as well, so it
needs to duplicate the whole kmap data.
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200210143218.24948-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We add ksymbol map into machine->kmaps, so it needs to be created as
'struct kmap', which is dependent on its dso having kernel type.
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200210200847.GA36715@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We add kernel module map into machine->kmaps, so it needs to be created
as 'struct kmap', which is dependent on its dso having kernel type.
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200210143218.24948-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
fddb5d430a ("open: introduce openat2(2) syscall")
9a2cef09c8 ("arch: wire up pidfd_getfd syscall")
We also need to grab a copy of uapi/linux/openat2.h since it is now
needed by fcntl.h, add it to tools/perf/check_headers.h.
$ diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
--- tools/perf/arch/x86/entry/syscalls/syscall_64.tbl 2019-12-20 16:43:57.662429958 -0300
+++ arch/x86/entry/syscalls/syscall_64.tbl 2020-02-10 16:36:22.070012468 -0300
@@ -357,6 +357,8 @@
433 common fspick __x64_sys_fspick
434 common pidfd_open __x64_sys_pidfd_open
435 common clone3 __x64_sys_clone3/ptregs
+437 common openat2 __x64_sys_openat2
+438 common pidfd_getfd __x64_sys_pidfd_getfd
#
# x32-specific system call numbers start at 512 to avoid cache impact
$
Update tools/'s copy of that file:
$ cp arch/x86/entry/syscalls/syscall_64.tbl tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
See the result:
$ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.before /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c
--- /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.before 2020-02-10 16:42:59.010636041 -0300
+++ /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c 2020-02-10 16:43:24.149958337 -0300
@@ -346,5 +346,7 @@
[433] = "fspick",
[434] = "pidfd_open",
[435] = "clone3",
+ [437] = "openat2",
+ [438] = "pidfd_getfd",
};
-#define SYSCALLTBL_x86_64_MAX_ID 435
+#define SYSCALLTBL_x86_64_MAX_ID 438
$
Now one can use:
perf trace -e openat2,pidfd_getfd
To get just those syscalls or use in things like:
perf trace -e open*
To get all the open variant (open, openat, openat2, etc) or:
perf trace pidfd*
To get the pidfd syscalls.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Relocations in alternative code can be dangerous, because the code is
copy/pasted to the text section after relocations have been resolved,
which can corrupt PC-relative addresses.
However, relocations might be acceptable in some cases, depending on the
architecture. For example, the x86 alternatives code manually fixes up
the target addresses for PC-relative jumps and calls.
So disallow relocations in alternative code, except where the x86 arch
code allows it.
This code may need to be tweaked for other arches when objtool gets
support for them.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Julien Thierry <jthierry@redhat.com>
Link: https://lkml.kernel.org/r/7b90b68d093311e4e8f6b504a9e1c758fd7e0002.1581359535.git.jpoimboe@redhat.com
When objtool encounters a fatal error, it usually means the binary is
corrupt or otherwise broken in some way. Up until now, such errors were
just treated as warnings which didn't fail the kernel build.
However, objtool is now stable enough that if a fatal error is
discovered, it most likely means something is seriously wrong and it
should fail the kernel build.
Note that this doesn't apply to "normal" objtool warnings; only fatal
ones.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Julien Thierry <jthierry@redhat.com>
Link: https://lkml.kernel.org/r/f18c3743de0fef673d49dd35760f26bdef7f6fc3.1581359535.git.jpoimboe@redhat.com
For now, disable MBA and MBM tests for AMD. Deciding test pass/fail
is not clear right now. We can enable when we have some clarity.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
RESCTRL feature is supported both on Intel and AMD now. Some features
are implemented differently. Add vendor detection mechanism. Use the vendor
check where there are differences.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cache Allocation Technology (CAT) selftest allocates a portion of
last level cache and starts a benchmark to read each cache
line in this portion of cache. Measure the cache misses in perf and
the misses should be equal to the number of cache lines in this
portion of cache.
We don't use CQM to calculate cache usage because some CAT enabled
platforms don't have CQM.
Co-developed-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Co-developed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cache QoS Monitoring (CQM) selftest starts stressful cache benchmark
with specified size of memory to access the cache. Last Level cache
occupancy reported by CQM should be close to the size of the memory.
Co-developed-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Co-developed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
MBA (Memory Bandwidth Allocation) test starts a stressful memory
bandwidth benchmark and allocates memory bandwidth from 100% down
to 10% for the benchmark process. For each allocation, compare
perf IMC counter and mbm total bytes from resctrl. The difference
between the two values should be within a threshold to pass the test.
Default benchmark is built-in fill_buf. But users can specify their
own benchmark by option "-b".
We can add memory bandwidth allocation for multiple processes in the
future.
Co-developed-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Co-developed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
MBM (Memory Bandwidth Monitoring) test is the first implemented selftest.
It starts a stressful memory bandwidth benchmark and assigns the
bandwidth pid in a resctrl monitoring group. Read and compare perf IMC
counter and MBM total bytes for the benchmark. The numbers should be
close enough to pass the test.
Default benchmark is built-in fill_buf. But users can specify their
own benchmark by option "-b".
We can add memory bandwidth monitoring for multiple processes in the
future.
Co-developed-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Co-developed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Built-in benchmark fill_buf generates stressful memory bandwidth
and cache traffic.
Later it will be used as a default benchmark by various resctrl tests
such as MBA (Memory Bandwidth Allocation) and MBM (Memory Bandwidth
Monitoring) tests.
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Co-developed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The callback starts a child process and puts the child pid in created
resctrl group with specified memory bandwidth in schemata. The child
starts running benchmark.
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Co-developed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Total memory bandwidth can be monitored from perf IMC counter and from
resctrl file system. Later the two will be compared to verify the total
memory bandwidth read from resctrl is correct.
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Co-developed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Babu Moger <babu.moger@amd.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
With some shells, the command construed for install of bpf selftests becomes
too large due to long list of files:
make[1]: execvp: /bin/sh: Argument list too long
make[1]: *** [../lib.mk:73: install] Error 127
Currently, each of the file lists is replicated three times in the command:
in the shell 'if' condition, in the 'echo' and in the 'rsync'. Reduce that
by one instance by using make conditionals and separate the echo and rsync
into two shell commands. (One would be inclined to just remove the '@' at
the beginning of the rsync command and let 'make' echo it by itself;
unfortunately, it appears that the '@' in the front of mkdir silences output
also for the following commands.)
Also, separate handling of each of the lists to its own shell command.
The semantics of the makefile is unchanged before and after the patch. The
ability of individual test directories to override INSTALL_RULE is retained.
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Tested-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 5f70bde26a ("selftests: fix build behaviour on targets' failures")
added a logic to track failure of builds of individual targets. However, it
does exactly the opposite of what a distro kernel needs: we create a RPM
package with a selected set of selftests and we need the build to fail if
build of any of the targets fail.
Both use cases are valid. A distribution kernel is in control of what is
included in the kernel and what is being built; any error needs to be
flagged and acted upon. A CI system that tries to build as many tests as
possible on the best effort basis is not really interested in a failure here
and there.
Support both use cases by introducing a FORCE_TARGETS variable. It is
switched off by default to make life for CI systems easier, distributions
can easily switch it on while building their packages.
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
tpm2 tests set fails if there is no /dev/tpm0 and /dev/tpmrm0
supported. Check if these files exist before run and mark test as
skipped in case of absence.
Signed-off-by: Nikita Sobolev <Nikita.Sobolev@synopsys.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
While running the ftracetests, the pid filter test failed because the
instance "foo" existed, and it was using it to rerun the test under a
instance named foo. The collision caused the test to fail as the mkdir
failed as the name already existed.
As of commit b5b77be812 ("selftests: ftrace: Allow some tests to be run
in a tracing instance") all a selftest needs to do to be tested in an
instance is to set the "instance" flag. There's no reason a selftest needs
to create an instance to run its test in an instance directly.
Remove the open coded testing in an instance for the pid filter test and
have it set the "instance" flag instead.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There is a spelling mistake in a literal string, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
I have an experimental setup where almost every possible system
service (even early startup ones) runs in separate namespace, using a
dedicated, minimal file system. In process of minimizing the contents
of the file systems with regards to modules and firmware files, I
noticed that in my system, the firmware files are loaded from three
different mount namespaces, those of systemd-udevd, init and
systemd-networkd. The logic of the source namespace is not very clear,
it seems to depend on the driver, but the namespace of the current
process is used.
So, this patch tries to make things a bit clearer and changes the
loading of firmware files only from the mount namespace of init. This
may also improve security, though I think that using firmware files as
attack vector could be too impractical anyway.
Later, it might make sense to make the mount namespace configurable,
for example with a new file in /proc/sys/kernel/firmware_config/. That
would allow a dedicated file system only for firmware files and those
need not be present anywhere else. This configurability would make
more sense if made also for kernel modules and /sbin/modprobe. Modules
are already loaded from init namespace (usermodehelper uses kthreadd
namespace) except when directly loaded by systemd-udevd.
Instead of using the mount namespace of the current process to load
firmware files, use the mount namespace of init process.
Link: https://lore.kernel.org/lkml/bb46ebae-4746-90d9-ec5b-fce4c9328c86@gmail.com/
Link: https://lore.kernel.org/lkml/0e3f7653-c59d-9341-9db2-c88f5b988c68@gmail.com/
Signed-off-by: Topi Miettinen <toiwoton@gmail.com>
Link: https://lore.kernel.org/r/20200123125839.37168-1-toiwoton@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix following build error. We could push a tcp.h header into one of the
include paths, but I think its easy enough to simply pull in the three
defines we need here. If we end up using more of tcp.h at some point
we can pull it in later.
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c: In function ‘connected_socket_v4’:
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: error: ‘TCP_REPAIR_ON’ undeclared (first use in this function)
repair = TCP_REPAIR_ON;
^
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: note: each undeclared identifier is reported only once for each function it appears in
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:29:11: error: ‘TCP_REPAIR_OFF_NO_WP’ undeclared (first use in this function)
repair = TCP_REPAIR_OFF_NO_WP;
Then with fix,
$ ./test_progs -n 44
#44/1 sockmap create_update_free:OK
#44/2 sockhash create_update_free:OK
#44 sockmap_basic:OK
Fixes: 5d3919a953 ("selftests/bpf: Test freeing sockmap/sockhash with a socket in it")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158131347731.21414.12120493483848386652.stgit@john-Precision-5820-Tower
Suppress non-error messages when applying new bootconfig
to initrd image. To enable it, replace printf for error
message with pr_err() macro.
This also adds a testcase for this fix.
Link: http://lkml.kernel.org/r/158125351377.16911.13283712972275131160.stgit@devnote2
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
To reduce the large static array from kernel data, allocate
xbc_nodes array dynamically only if the kernel loads a
bootconfig.
Note that this also add dummy memblock.h for user-spacae
bootconfig tool.
Link: http://lkml.kernel.org/r/158108569699.3187.6512834527603883707.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Use the more optimized strlist implementation to do the idle function
lookup.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200210163147.25358-1-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "acpi_idle_do_entry", "acpi_processor_ffh_cstate_enter", and
"idle_cpu" symbols appear in 'perf top' output, at least on AMD systems.
Add them to perf's idle_symbols list, so they don't dominate 'perf top'
output.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200207230613.26709-2-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For data collected on machines with front end stalled cycles supported,
such as found on modern AMD CPU families, commit 146540fb54 ("perf
stat: Always separate stalled cycles per insn") introduces a new line in
CSV output with a leading comma that upsets some automated scripts.
Scripts have to use "-e ex_ret_instr" to work around this issue, after
upgrading to a version of perf with that commit.
We could add "if (have_frontend_stalled && !config->csv_sep)" to the not
(total && avg) else clause, to emphasize that CSV users are usually
scripts, and are written to do only what is needed, i.e., they wouldn't
typically invoke "perf stat" without specifying an explicit event list.
But - let alone CSV output - why should users now tolerate a constant
0-reporting extra line in regular terminal output?:
BEFORE:
$ sudo perf stat --all-cpus -einstructions,cycles -- sleep 1
Performance counter stats for 'system wide':
181,110,981 instructions # 0.58 insn per cycle
# 0.00 stalled cycles per insn
309,876,469 cycles
1.002202582 seconds time elapsed
The user would not like to see the now permanent:
"0.00 stalled cycles per insn"
line fixture, as it gives no useful information.
So this patch removes the printing of the zeroed stalled cycles line
altogether, almost reverting the very original commit fb4605ba47
("perf stat: Check for frontend stalled for metrics"), which seems like
it was written to normalize --metric-only column output of common Intel
machines at the time: modern Intel machines have ceased to support the
genericised frontend stalled metrics AFAICT.
AFTER:
$ sudo perf stat --all-cpus -einstructions,cycles -- sleep 1
Performance counter stats for 'system wide':
244,071,432 instructions # 0.69 insn per cycle
355,353,490 cycles
1.001862516 seconds time elapsed
Output behaviour when stalled cycles is indeed measured is not affected
(BEFORE == AFTER):
$ sudo perf stat --all-cpus -einstructions,cycles,stalled-cycles-frontend -- sleep 1
Performance counter stats for 'system wide':
247,227,799 instructions # 0.63 insn per cycle
# 0.26 stalled cycles per insn
394,745,636 cycles
63,194,485 stalled-cycles-frontend # 16.01% frontend cycles idle
1.002079770 seconds time elapsed
Fixes: 146540fb54 ("perf stat: Always separate stalled cycles per insn")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200207230613.26709-1-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since printk() wrapper macro uses __VA_ARGS__ without "##" prefix, it causes
a build error if there is no variable arguments (e.g. only fmt is
specified.) To fix this error, use ##__VA_ARGS__ instead of __VAR_ARGS__.
Link: http://lkml.kernel.org/r/158108370130.2758.10893830923800978011.stgit@devnote2
Fixes: 950313ebf7 ("tools: bootconfig: Add bootconfig command")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
For the command
"intel-speed-select perf-profile info":
There are two instances of “speed-select-turbo-freq” underneath
“perf-profile-level-0” for each package. When we load the output into
python with json.load(), the second instance overwrites the first.
Result is that we can only access:
"speed-select-turbo-freq": {
"bucket-0": {
"high-priority-cores-count": "2",
"high-priority-max-frequency(MHz)": "3000",
"high-priority-max-avx2-frequency(MHz)": "2800",
"high-priority-max-avx512-frequency(MHz)": "2600"
},
Because it is a duplicate of "speed-select-turbo-freq": "disabled"
Same is true for "speed-select-base-freq".
To avoid this add "-properties" suffix for the second instance to
differentiate.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When mailbox command for the turbo-freq enable fails, then don't display
result for auto-mode. When turbo-freq enable fails, there is no point
to set CPU priorities.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- Kernel fixes:
- Install cgroup events to the correct CPU context to prevent a
potential list double add
- Prevent am intgeer underflow in the perf mlock acounting
- Add a missing prototyp for arch_perf_update_userpage()
- Tooling:
- Add a missing unlock in the error path of maps__insert() in perf maps.
- Fix the build with the latest libbfd
- Fix the perf parser so it does not delete parse event terms, which
caused a regression for using perf with the ARM CoreSight as the sink
confuguration was missing due to the deletion.
- Fix the double free in the perf CPU map merging test case
- Add the missing ustring support for the perf probe command
-----BEGIN PGP SIGNATURE-----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=xu7D
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A set of fixes and improvements for the perf subsystem:
Kernel fixes:
- Install cgroup events to the correct CPU context to prevent a
potential list double add
- Prevent an integer underflow in the perf mlock accounting
- Add a missing prototype for arch_perf_update_userpage()
Tooling:
- Add a missing unlock in the error path of maps__insert() in perf
maps.
- Fix the build with the latest libbfd
- Fix the perf parser so it does not delete parse event terms, which
caused a regression for using perf with the ARM CoreSight as the
sink configuration was missing due to the deletion.
- Fix the double free in the perf CPU map merging test case
- Add the missing ustring support for the perf probe command"
* tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf maps: Add missing unlock to maps__insert() error case
perf probe: Add ustring support for perf probe command
perf: Make perf able to build with latest libbfd
perf test: Fix test case Merge cpu map
perf parse: Copy string to perf_evsel_config_term
perf parse: Refactor 'struct perf_evsel_config_term'
kernel/events: Add a missing prototype for arch_perf_update_userpage()
perf/cgroups: Install cgroup events to correct cpuctx
perf/core: Fix mlock accounting in perf_mmap()
Pull networking fixes from David Miller:
1) Unbalanced locking in mwifiex_process_country_ie, from Brian Norris.
2) Fix thermal zone registration in iwlwifi, from Andrei
Otcheretianski.
3) Fix double free_irq in sgi ioc3 eth, from Thomas Bogendoerfer.
4) Use after free in mptcp, from Florian Westphal.
5) Use after free in wireguard's root_remove_peer_lists, from Eric
Dumazet.
6) Properly access packets heads in bonding alb code, from Eric
Dumazet.
7) Fix data race in skb_queue_len(), from Qian Cai.
8) Fix regression in r8169 on some chips, from Heiner Kallweit.
9) Fix XDP program ref counting in hv_netvsc, from Haiyang Zhang.
10) Certain kinds of set link netlink operations can cause a NULL deref
in the ipv6 addrconf code. Fix from Eric Dumazet.
11) Don't cancel uninitialized work queue in drop monitor, from Ido
Schimmel.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
net: thunderx: use proper interface type for RGMII
mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap
bpf: Improve bucket_log calculation logic
selftests/bpf: Test freeing sockmap/sockhash with a socket in it
bpf, sockhash: Synchronize_rcu before free'ing map
bpf, sockmap: Don't sleep while holding RCU lock on tear-down
bpftool: Don't crash on missing xlated program instructions
bpf, sockmap: Check update requirements after locking
drop_monitor: Do not cancel uninitialized work item
mlxsw: spectrum_dpipe: Add missing error path
mlxsw: core: Add validation of hardware device types for MGPIR register
mlxsw: spectrum_router: Clear offload indication from IPv6 nexthops on abort
selftests: mlxsw: Add test cases for local table route replacement
mlxsw: spectrum_router: Prevent incorrect replacement of local table routes
net: dsa: microchip: enable module autoprobe
ipv6/addrconf: fix potential NULL deref in inet6_set_link_af()
dpaa_eth: support all modes with rate adapting PHYs
net: stmmac: update pci platform data to use phy_interface
net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter
net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter
...
Daniel Borkmann says:
====================
pull-request: bpf 2020-02-07
The following pull-request contains BPF updates for your *net* tree.
We've added 15 non-merge commits during the last 10 day(s) which contain
a total of 12 files changed, 114 insertions(+), 31 deletions(-).
The main changes are:
1) Various BPF sockmap fixes related to RCU handling in the map's tear-
down code, from Jakub Sitnicki.
2) Fix macro state explosion in BPF sk_storage map when calculating its
bucket_log on allocation, from Martin KaFai Lau.
3) Fix potential BPF sockmap update race by rechecking socket's established
state under lock, from Lorenz Bauer.
4) Fix crash in bpftool on missing xlated instructions when kptr_restrict
sysctl is set, from Toke Høiland-Jørgensen.
5) Fix i40e's XSK wakeup code to return proper error in busy state and
various misc fixes in xdpsock BPF sample code, from Maciej Fijalkowski.
6) Fix the way modifiers are skipped in BTF in the verifier while walking
pointers to avoid program rejection, from Alexei Starovoitov.
7) Fix Makefile for runqslower BPF tool to i) rebuild on libbpf changes and
ii) to fix undefined reference linker errors for older gcc version due to
order of passed gcc parameters, from Yulia Kartseva and Song Liu.
8) Fix a trampoline_count BPF kselftest warning about missing braces around
initializer, from Andrii Nakryiko.
9) Fix up redundant "HAVE" prefix from large INSN limit kernel probe in
bpftool, from Michal Rostecki.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 7e81a35302 ("bpf: Sockmap, ensure sock lock held during tear
down") introduced sleeping issues inside RCU critical sections and while
holding a spinlock on sockmap/sockhash tear-down. There has to be at least
one socket in the map for the problem to surface.
This adds a test that triggers the warnings for broken locking rules. Not a
fix per se, but rather tooling to verify the accompanying fixes. Run on a
VM with 1 vCPU to reproduce the warnings.
Fixes: 7e81a35302 ("bpf: Sockmap, ensure sock lock held during tear down")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200206111652.694507-4-jakub@cloudflare.com
Turns out the xlated program instructions can also be missing if
kptr_restrict sysctl is set. This means that the previous fix to check the
jited_prog_insns pointer was insufficient; add another check of the
xlated_prog_insns pointer as well.
Fixes: 5b79bcdf03 ("bpftool: Don't crash on missing jited insns or ksyms")
Fixes: cae73f2339 ("bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200206102906.112551-1-toke@redhat.com
Test that routes in the main table do not replace identical routes in
the local table and that routes in the local table do replace identical
routes in the main table.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* fix register corruption
* ENOTSUPP/EOPNOTSUPP mixed
* reset cleanups/fixes
* selftests
x86:
* Bug fixes and cleanups
* AMD support for APIC virtualization even in combination with
in-kernel PIT or IOAPIC.
MIPS:
* Compilation fix.
Generic:
* Fix refcount overflow for zero page.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeOuf7AAoJEL/70l94x66DOBQH/j1W9lUpbDgr9aWbrZT+O/yP
FWzUDrRlCZCjV1FQKbGPa4YLeDRTG5n+RIQTjmCGRqiMqeoELSJ1+iK99e97nG/u
L28zf/90Nf0R+wwHL4AOFeploTYfG4WP8EVnlr3CG2UCJrNjxN1KU7yRZoWmWa2d
ckLJ8ouwNvx6VZd233LVmT38EP4352d1LyqIL8/+oXDIyAcRJLFQu1gRCwagsh3w
1v1czowFpWnRQ/z9zU7YD+PA4v85/Ge8sVVHlpi1X5NgV/khk4U6B0crAw6M+la+
mTmpz9g56oAh9m9NUdtv4zDCz1EWGH0v8+ZkAajUKtrM0ftJMn57P6p8PH4VVlE=
=5+Wl
-----END PGP SIGNATURE-----
Merge tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"s390:
- fix register corruption
- ENOTSUPP/EOPNOTSUPP mixed
- reset cleanups/fixes
- selftests
x86:
- Bug fixes and cleanups
- AMD support for APIC virtualization even in combination with
in-kernel PIT or IOAPIC.
MIPS:
- Compilation fix.
Generic:
- Fix refcount overflow for zero page"
* tag 'kvm-5.6-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: vmx: delete meaningless vmx_decache_cr0_guest_bits() declaration
KVM: x86: Mark CR4.UMIP as reserved based on associated CPUID bit
x86: vmxfeatures: rename features for consistency with KVM and manual
KVM: SVM: relax conditions for allowing MSR_IA32_SPEC_CTRL accesses
KVM: x86: Fix perfctr WRMSR for running counters
x86/kvm/hyper-v: don't allow to turn on unsupported VMX controls for nested guests
x86/kvm/hyper-v: move VMX controls sanitization out of nested_enable_evmcs()
kvm: mmu: Separate generating and setting mmio ptes
kvm: mmu: Replace unsigned with unsigned int for PTE access
KVM: nVMX: Remove stale comment from nested_vmx_load_cr3()
KVM: MIPS: Fold comparecount_func() into comparecount_wakeup()
KVM: MIPS: Fix a build error due to referencing not-yet-defined function
x86/kvm: do not setup pv tlb flush when not paravirtualized
KVM: fix overflow of zero page refcount with ksm running
KVM: x86: Take a u64 when checking for a valid dr7 value
KVM: x86: use raw clock values consistently
KVM: x86: reorganize pvclock_gtod_data members
KVM: nVMX: delete meaningless nested_vmx_run() declaration
KVM: SVM: allow AVIC without split irqchip
kvm: ioapic: Lazy update IOAPIC EOI
...
Turns out that when we accept a new subflow, the newly created
inet_sk(tcp_sk)->pinet6 points at the ipv6_pinfo structure of the
listener socket.
This wasn't caught by the selftest because it closes the accepted fd
before the listening one.
adding a close(listenfd) after accept returns is enough:
BUG: KASAN: use-after-free in inet6_getname+0x6ba/0x790
Read of size 1 at addr ffff88810e310866 by task mptcp_connect/2518
Call Trace:
inet6_getname+0x6ba/0x790
__sys_getpeername+0x10b/0x250
__x64_sys_getpeername+0x6f/0xb0
also alter test program to exercise this.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Added new "bootconfig".
Looks for a file appended to initrd to add boot config options.
This has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and
kprobe events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXjtAURQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qshOAQDzopQmvAVrrI6oogghr8JQA30Z2yqT
i+Ld7vPWL2MV9wEA1S+zLGDSYrj8f/vsCq6BxRYT1ApO+YtmY6LTXiUejwg=
=WNds
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added new "bootconfig".
This looks for a file appended to initrd to add boot config options,
and has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and kprobe
events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
bootconfig: Show the number of nodes on boot message
tools/bootconfig: Show the number of bootconfig nodes
bootconfig: Add more parse error messages
bootconfig: Use bootconfig instead of boot config
ftrace: Protect ftrace_graph_hash with ftrace_sync
ftrace: Add comment to why rcu_dereference_sched() is open coded
tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
tracing: Annotate ftrace_graph_hash pointer with __rcu
bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
tracing: Use seq_buf for building dynevent_cmd string
tracing: Remove useless code in dynevent_arg_pair_add()
tracing: Remove check_arg() callbacks from dynevent args
tracing: Consolidate some synth_event_trace code
tracing: Fix now invalid var_ref_vals assumption in trace action
tracing: Change trace_boot to use synth_event interface
tracing: Move tracing selftests to bottom of menu
tracing: Move mmio tracer config up with the other tracers
tracing: Move tracing test module configs together
tracing: Move all function tracing configs together
tracing: Documentation for in-kernel synthetic event API
...
Show the number of bootconfig nodes when applying new bootconfig to
initrd.
Since there are limitations of bootconfig not only in its filesize,
but also the number of nodes, the number should be shown when applying
so that user can get the feeling of scale of current bootconfig.
Link: http://lkml.kernel.org/r/158091061337.27924.10886706631693823982.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add missing dependency of $(BPFOBJ) to $(LIBBPF_SRC), so that running make
in runqslower/ will rebuild libbpf.a when there is change in libbpf/.
Fixes: 9c01546d26 ("tools/bpf: Add runqslower tool to tools/bpf")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200204215037.2258698-1-songliubraving@fb.com
Without this, we wind up proceeding too early sometimes when the
previous process has just used the same listening port. So, we tie the
listening socket query to the specific pid we're interested in.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CONFIG_ENABLE_WARN_DEPRECATED is gone since commit 771c035372
("deprecate the '__deprecated' attribute warnings entirely and for
good").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ensure that peers with low order points are ignored, both in the case
where we already have a device private key and in the case where we do
not. This adds points that naturally give a zero output.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
perf maps:
Cengiz Can:
- Add missing unlock to maps__insert() error case.
srcline:
Changbin Du:
- Make perf able to build with latest libbfd.
perf parse:
Leo Yan:
- Keep copy of string in perf_evsel_config_term() to fix sink terms
processing in ARM CoreSight.
perf test:
Thomas Richter:
- Fix test case Merge cpu map, removing extra reference count drop that
causes a segfault on s/390.
perf probe:
Thomas Richter:
- Add ustring support for perf probe command
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXjUwAgAKCRCyPKLppCJ+
J163AQCvl98mgSHfAVq9roP3ip1T1TwLXT+zPA9aOEc95d7NwwD9EuHVfs1kIjfV
+nv8/i3T3YVq1Dlx9MkvKEVQwJdiCws=
=f/tq
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.6-20200201' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf maps:
Cengiz Can:
- Add missing unlock to maps__insert() error case.
srcline:
Changbin Du:
- Make perf able to build with latest libbfd.
perf parse:
Leo Yan:
- Keep copy of string in perf_evsel_config_term() to fix sink terms
processing in ARM CoreSight.
perf test:
Thomas Richter:
- Fix test case Merge cpu map, removing extra reference count drop that
causes a segfault on s/390.
perf probe:
Thomas Richter:
- Add ustring support for perf probe command
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from David Miller:
1) Use after free in rxrpc_put_local(), from David Howells.
2) Fix 64-bit division error in mlxsw, from Nathan Chancellor.
3) Make sure we clear various bits of TCP state in response to
tcp_disconnect(). From Eric Dumazet.
4) Fix netlink attribute policy in cls_rsvp, from Eric Dumazet.
5) txtimer must be deleted in stmmac suspend(), from Nicolin Chen.
6) Fix TC queue mapping in bnxt_en driver, from Michael Chan.
7) Various netdevsim fixes from Taehee Yoo (use of uninitialized data,
snapshot panics, stack out of bounds, etc.)
8) cls_tcindex changes hash table size after allocating the table, fix
from Cong Wang.
9) Fix regression in the enforcement of session ID uniqueness in l2tp.
We only have to enforce uniqueness for IP based tunnels not UDP
ones. From Ridge Kennedy.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
gtp: use __GFP_NOWARN to avoid memalloc warning
l2tp: Allow duplicate session creation with UDP
r8152: Add MAC passthrough support to new device
net_sched: fix an OOB access in cls_tcindex
qed: Remove set but not used variable 'p_link'
tc-testing: add missing 'nsPlugin' to basic.json
tc-testing: fix eBPF tests failure on linux fresh clones
net: hsr: fix possible NULL deref in hsr_handle_frame()
netdevsim: remove unused sdev code
netdevsim: use __GFP_NOWARN to avoid memalloc warning
netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs
netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init()
netdevsim: fix panic in nsim_dev_take_snapshot_write()
netdevsim: disable devlink reload when resources are being used
netdevsim: fix using uninitialized resources
bnxt_en: Fix TC queue mapping.
bnxt_en: Fix logic that disables Bus Master during firmware reset.
bnxt_en: Fix RDMA driver failure with SRIOV after firmware reset.
bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected.
net: stmmac: Delete txtimer in suspend()
...
- Implement user_access_begin() and friends for our platforms that support
controlling kernel access to userspace.
- Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.
- Some tweaks to our pseries IOMMU code to allow SVMs ("secure" virtual
machines) to use the IOMMU.
- Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit VDSO, and
some other improvements.
- A series to use the PCI hotplug framework to control opencapi card's so that
they can be reset and re-read after flashing a new FPGA image.
As well as other minor fixes and improvements as usual.
Thanks to:
Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy, Andrew Donnellan,
Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen Zhou, Christophe Leroy,
Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Joel Stanley, Jordan Niethe,
Julia Lawall, Krzysztof Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus
Walleij, Michael Bringmann, Nathan Chancellor, Nicholas Piggin, Nick
Desaulniers, Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy
Dunlap, Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago Jung
Bauermann, Tyrel Datwyler, Vaibhav Jain.
-----BEGIN PGP SIGNATURE-----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=xpG+
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"A pretty small batch for us, and apologies for it being a bit late, I
wanted to sneak Christophe's user_access_begin() series in.
Summary:
- Implement user_access_begin() and friends for our platforms that
support controlling kernel access to userspace.
- Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.
- Some tweaks to our pseries IOMMU code to allow SVMs ("secure"
virtual machines) to use the IOMMU.
- Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit
VDSO, and some other improvements.
- A series to use the PCI hotplug framework to control opencapi
card's so that they can be reset and re-read after flashing a new
FPGA image.
As well as other minor fixes and improvements as usual.
Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy,
Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen
Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A.
Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof
Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael
Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers,
Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap,
Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago
Jung Bauermann, Tyrel Datwyler, Vaibhav Jain"
* tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits)
powerpc: configs: Cleanup old Kconfig options
powerpc/configs/skiroot: Enable some more hardening options
powerpc/configs/skiroot: Disable xmon default & enable reboot on panic
powerpc/configs/skiroot: Enable security features
powerpc/configs/skiroot: Update for symbol movement only
powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV
powerpc/configs/skiroot: Drop HID_LOGITECH
powerpc/configs: Drop NET_VENDOR_HP which moved to staging
powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE
powerpc/configs: Drop CONFIG_QLGE which moved to staging
powerpc: Do not consider weak unresolved symbol relocations as bad
powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK
powerpc: indent to improve Kconfig readability
powerpc: Provide initial documentation for PAPR hcalls
powerpc: Implement user_access_save() and user_access_restore()
powerpc: Implement user_access_begin and friends
powerpc/32s: Prepare prevent_user_access() for user_access_end()
powerpc/32s: Drop NULL addr verification
powerpc/kuap: Fix set direction in allow/prevent_user_access()
powerpc/32s: Fix bad_kuap_fault()
...
since tdc tests for cls_basic need $DEV1, use 'nsPlugin' so that the
following command can be run without errors:
[root@f31 tc-testing]# ./tdc.py -c basic
Fixes: 4717b05328 ("tc-testing: Introduced tdc tests for basic filter")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
when the following command is done on a fresh clone of the kernel tree,
[root@f31 tc-testing]# ./tdc.py -c bpf
test cases that need to build the eBPF sample program fail systematically,
because 'buildebpfPlugin' is unable to install the kernel headers (i.e, the
'khdr' target fails). Pass the correct environment to 'make', in place of
ENVIR, to allow running these tests.
Fixes: 4c2d39bd40 ("tc-testing: use a plugin to build eBPF program")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce BITS_TO_U64, BITS_TO_U32 and BITS_TO_BYTES as they are handy in
the following patches (BITS_TO_U32 specifically). Reimplement tools/
version of the macros according to the kernel implementation.
Also fix indentation for BITS_PER_TYPE definition.
Link: http://lkml.kernel.org/r/20200102043031.30357-3-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Amritha Nambiar <amritha.nambiar@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: "Tobin C . Harding" <tobin@kernel.org>
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"HAVE" prefix is already applied by default to feature macros and before
this change, the large INSN limit macro had the incorrect name with
double "HAVE".
Fixes: 2faef64aa6 ("bpftool: Add misc section and probe for large INSN limit")
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200202110200.31024-1-mrostecki@opensuse.org
support by Dexuan Cui.
- Fix for a warning shown when host sends non-aligned balloon requests
by Tianyu Lan.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE4n5dijQDou9mhzu83qZv95d3LNwFAl43g98ACgkQ3qZv95d3
LNzKrw/+LrlCrzsmFuH/0drGn+Y6UpaOUMY5SMFZVmkjWRg9CmEugO6vUn1KEEIX
lx2JkamXmF6HMZ+xoy8b1QrZAO7ueBq7Nqe4UQuWPfA2MoAjQbFpCl/SP9r8cNYu
3qBTP2zfay1qt0LyAC5LH/uXnm2e++LTFG/mnA0GYlt9e750LlgsjcsZrsNUBo0l
yO56219/IBOIEI1LQLAN1q3rwFHnUWYbSY5HVSZBOwjDtTHwK64G45nKFNSnIC1h
sFg6czDIPcYBGPzvSHcC4HJsRCddaqcBdt2O1mlXo0UJJXkhmdXx6o4W5DCP9BSD
FzJIzU5NjGuPnUrQUBW04aH7IoIZLXOMhyZoX14BDswwNNPkAuWAmsDzwTP8irHH
EvaH51c9RO34EkPF+2CgcT57+58KDL1NDOtak2gkOisBtw4SJgozz3vt2r5lZ/2b
4vhho0i7tZcQvMsEwR0ltMsRabMJpO07dgc3OZv2m3s75AKvPI8wtqxUS9N0smu4
dQ+wAYgjfiuvOJ1oLbOOiFWDGAuxNkttilN3h5ZYYJfZ1FamkwATa3xkmmV8MgEh
lWj1MbOssEedUBG3asChJ+pjfdI19Pk9H5YNT0TIgSMUt5YFF6ZpP3RQURlDxhmG
BxQyft0dua6Ra5MSl11gl4p90PJC5lbknwTToFD3hSPdzcYIr8U=
=3tZ1
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Sasha Levin:
- Most of the commits here are work to enable host-initiated
hibernation support by Dexuan Cui.
- Fix for a warning shown when host sends non-aligned balloon requests
by Tianyu Lan.
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hv_utils: Add the support of hibernation
hv_utils: Support host-initiated hibernation request
hv_utils: Support host-initiated restart request
Tools: hv: Reopen the devices if read() or write() returns errors
video: hyperv: hyperv_fb: Use physical memory for fb on HyperV Gen 1 VMs.
Drivers: hv: vmbus: Ignore CHANNELMSG_TL_CONNECT_RESULT(23)
video: hyperv_fb: Fix hibernation for the deferred IO feature
Input: hyperv-keyboard: Add the support of hibernation
hv_balloon: Balloon up according to request page number
This commit adds a test for FIN_ACK process races related reconnection
latency spike issues. The issue has described and solved by the
previous commit ("tcp: Reduce SYN resend delay if a suspicous ACK is
received").
The test program is configured with a server and a client process. The
server creates and binds a socket to a port that dynamically allocated,
listen on it, and start a infinite loop. Inside the loop, it accepts
connection, reads 4 bytes from the socket, and closes the connection.
The client is constructed as an infinite loop. Inside the loop, it
creates a socket with LINGER and NODELAY option, connect to the server,
send 4 bytes data, try read some data from server. After the read()
returns, it measure the latency from the beginning of this loop to this
point and if the latency is larger than 1 second (spike), print a
message.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prevent cpufreq from creating excessively large stack frames and fix
the handling of devices deleted during system-wide resume in the PM
core (Rafael Wysocki), revert a problematic commit affecting the
cpupower utility and correct its man page (Thomas Renninger,
Brahadambal Srinivasan), and improve the intel_pstate_tracer
utility (Doug Smythies).
-----BEGIN PGP SIGNATURE-----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=ctQq
-----END PGP SIGNATURE-----
Merge tag 'pm-5.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power manadement updates from Rafael Wysocki:
"Prevent cpufreq from creating excessively large stack frames and fix
the handling of devices deleted during system-wide resume in the PM
core (Rafael Wysocki), revert a problematic commit affecting the
cpupower utility and correct its man page (Thomas Renninger,
Brahadambal Srinivasan), and improve the intel_pstate_tracer utility
(Doug Smythies)"
* tag 'pm-5.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/power/x86/intel_pstate_tracer: change several graphs to autoscale y-axis
tools/power/x86/intel_pstate_tracer: changes for python 3 compatibility
Correction to manpage of cpupower
cpufreq: Avoid creating excessively large stack frames
PM: core: Fix handling of devices deleted during system-wide resume
cpupower: Revert library ABI changes from commit ae2917093f
Pull updates from Andrew Morton:
"Most of -mm and quite a number of other subsystems: hotfixes, scripts,
ocfs2, misc, lib, binfmt, init, reiserfs, exec, dma-mapping, kcov.
MM is fairly quiet this time. Holidays, I assume"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
kcov: ignore fault-inject and stacktrace
include/linux/io-mapping.h-mapping: use PHYS_PFN() macro in io_mapping_map_atomic_wc()
execve: warn if process starts with executable stack
reiserfs: prevent NULL pointer dereference in reiserfs_insert_item()
init/main.c: fix misleading "This architecture does not have kernel memory protection" message
init/main.c: fix quoted value handling in unknown_bootoption
init/main.c: remove unnecessary repair_env_string in do_initcall_level
init/main.c: log arguments and environment passed to init
fs/binfmt_elf.c: coredump: allow process with empty address space to coredump
fs/binfmt_elf.c: coredump: delete duplicated overflow check
fs/binfmt_elf.c: coredump: allocate core ELF header on stack
fs/binfmt_elf.c: make BAD_ADDR() unlikely
fs/binfmt_elf.c: better codegen around current->mm
fs/binfmt_elf.c: don't copy ELF header around
fs/binfmt_elf.c: fix ->start_code calculation
fs/binfmt_elf.c: smaller code generation around auxv vector fill
lib/find_bit.c: uninline helper _find_next_bit()
lib/find_bit.c: join _find_next_bit{_le}
uapi: rename ext2_swab() to swab() and share globally in swab.h
lib/scatterlist.c: adjust indentation in __sg_alloc_table
...
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- three fixes and a cleanup for the resctrl code
- a HyperV fix
- a fix to /proc/kcore contents in live debugging sessions
- a fix for the x86 decoder opcode map"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/decoder: Add TEST opcode to Group3-2
x86/resctrl: Clean up unused function parameter in mkdir path
x86/resctrl: Fix a deadlock due to inaccurate reference
x86/resctrl: Fix use-after-free due to inaccurate refcount of rdtgroup
x86/resctrl: Fix use-after-free when deleting resource groups
x86/hyper-v: Add "polling" bit to hv_synic_sint
x86/crash: Define arch_crash_save_vmcoreinfo() if CONFIG_CRASH_CORE=y
The sysfs file name for enabling sanity checking is called
'sanity_checks' and not 'sanity'.
The name of the file has never changed since the introduction of the
slub allocator. Obviously, most people turn the checks on via the
command line option and not during runtime using slabinfo.
Link: http://lkml.kernel.org/r/20200116131642.642-1-dwagner@suse.de
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the gup benchmark flags to use the symbolic FOLL_WRITE, instead of a
hard-coded "1" value.
Also, clean up the filtering of gup flags a little, by just doing it
once before issuing any of the get_user_pages*() calls. This makes it
harder to overlook, instead of having little "gup_flags & 1" phrases in
the function calls.
Link: http://lkml.kernel.org/r/20200107224558.2362728-22-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PPC: Bugfixes
x86:
* Support for mapping DAX areas with large nested page table entries.
* Cleanups and bugfixes here too. A particularly important one is
a fix for FPU load when the thread has TIF_NEED_FPU_LOAD. There is
also a race condition which could be used in guest userspace to exploit
the guest kernel, for which the embargo expired today.
* Fast path for IPI delivery vmexits, shaving about 200 clock cycles
from IPI latency.
* Protect against "Spectre-v1/L1TF" (bring data in the cache via
speculative out of bound accesses, use L1TF on the sibling hyperthread
to read it), which unfortunately is an even bigger whack-a-mole game
than SpectreV1.
Sean continues his mission to rewrite KVM. In addition to a sizable
number of x86 patches, this time he contributed a pretty large refactoring
of vCPU creation that affects all architectures but should not have any
visible effect.
s390 will come next week together with some more x86 patches.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeMxtCAAoJEL/70l94x66DQxIIAJv9hMmXLQHGFnUMskjGErR6
DCLSC0YRdRMwE50CerblyJtGsMwGsPyHZwvZxoAceKJ9w0Yay9cyaoJ87ItBgHoY
ce0HrqIUYqRSJ/F8WH2lSzkzMBr839rcmqw8p1tt4D5DIsYnxHGWwRaaP+5M/1KQ
YKFu3Hea4L00U339iIuDkuA+xgz92LIbsn38svv5fxHhPAyWza0rDEYHNgzMKuoF
IakLf5+RrBFAh6ZuhYWQQ44uxjb+uQa9pVmcqYzzTd5t1g4PV5uXtlJKesHoAvik
Eba8IEUJn+HgQJjhp3YxQYuLeWOwRF3bwOiZ578MlJ4OPfYXMtbdlqCQANHOcGk=
=H/q1
-----END PGP SIGNATURE-----
Merge tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"This is the first batch of KVM changes.
ARM:
- cleanups and corner case fixes.
PPC:
- Bugfixes
x86:
- Support for mapping DAX areas with large nested page table entries.
- Cleanups and bugfixes here too. A particularly important one is a
fix for FPU load when the thread has TIF_NEED_FPU_LOAD. There is
also a race condition which could be used in guest userspace to
exploit the guest kernel, for which the embargo expired today.
- Fast path for IPI delivery vmexits, shaving about 200 clock cycles
from IPI latency.
- Protect against "Spectre-v1/L1TF" (bring data in the cache via
speculative out of bound accesses, use L1TF on the sibling
hyperthread to read it), which unfortunately is an even bigger
whack-a-mole game than SpectreV1.
Sean continues his mission to rewrite KVM. In addition to a sizable
number of x86 patches, this time he contributed a pretty large
refactoring of vCPU creation that affects all architectures but should
not have any visible effect.
s390 will come next week together with some more x86 patches"
* tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
x86/KVM: Clean up host's steal time structure
x86/KVM: Make sure KVM_VCPU_FLUSH_TLB flag is not missed
x86/kvm: Cache gfn to pfn translation
x86/kvm: Introduce kvm_(un)map_gfn()
x86/kvm: Be careful not to clear KVM_VCPU_FLUSH_TLB bit
KVM: PPC: Book3S PR: Fix -Werror=return-type build failure
KVM: PPC: Book3S HV: Release lock on page-out failure path
KVM: arm64: Treat emulated TVAL TimerValue as a signed 32-bit integer
KVM: arm64: pmu: Only handle supported event counters
KVM: arm64: pmu: Fix chained SW_INCR counters
KVM: arm64: pmu: Don't mark a counter as chained if the odd one is disabled
KVM: arm64: pmu: Don't increment SW_INCR if PMCR.E is unset
KVM: x86: Use a typedef for fastop functions
KVM: X86: Add 'else' to unify fastop and execute call path
KVM: x86: inline memslot_valid_for_gpte
KVM: x86/mmu: Use huge pages for DAX-backed files
KVM: x86/mmu: Remove lpage_is_disallowed() check from set_spte()
KVM: x86/mmu: Fold max_mapping_level() into kvm_mmu_hugepage_adjust()
KVM: x86/mmu: Zap any compound page when collapsing sptes
KVM: x86/mmu: Remove obsolete gfn restoration in FNAME(fetch)
...
Local IRQs are reset by a normal cpu reset. The initial cpu reset and
the clear cpu reset, as superset of the normal reset, both clear the
IRQs too.
Let's inject an interrupt to a vCPU before calling a reset and see if
it is gone after the reset.
We choose to inject only an emergency interrupt at this point and can
extend the test to other types of IRQs later.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
[minor fixups]
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20200131100205.74720-7-frankja@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Test if the registers end up having the correct values after a normal,
initial and clear reset.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20200131100205.74720-6-frankja@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add library access to more registers.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20200131100205.74720-5-frankja@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
`tools/perf/util/map.c` has a function named `maps__insert` that
acquires a write lock if its in multithread context.
Even though this lock is released when function successfully completes,
there's a branch that is executed when `maps_by_name == NULL` that
returns from this function without releasing the write lock.
Added an `up_write` to release the lock when this happens.
Fixes: a7c2b572e2 ("perf map_groups: Auto sort maps by name, if needed")
Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200120141553.23934-1-cengiz@kernel.wtf
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kernel commit 88903c4643 ("tracing/probe: Add ustring type for user-space string")
adds support for user-space strings when type 'ustring' is specified.
Here is an example using sysfs command line interface
for kprobes:
Function to probe:
struct filename *
getname_flags(const char __user *filename, int flags, int *empty)
Setup:
# cd /sys/kernel/debug/tracing/
# echo 'p:tmr1 getname_flags +0(%r2):ustring' > kprobe_events
# cat events/kprobes/tmr1/format | fgrep print
print fmt: "(%lx) arg1=\"%s\"", REC->__probe_ip, REC->arg1
# echo 1 > events/kprobes/tmr1/enable
# touch /tmp/111
# echo 0 > events/kprobes/tmr1/enable
# cat trace|fgrep /tmp/111
touch-5846 [005] d..2 255520.717960: tmr1:\
(getname_flags+0x0/0x400) arg1="/tmp/111"
Doing the same with the perf tool fails.
Using type 'string' succeeds:
# perf probe "vfs_getname=getname_flags:72 pathname=filename:string"
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=filename:string)
....
# perf probe -d probe:vfs_getname
Removed event: probe:vfs_getname
However using type 'ustring' fails (output before):
# perf probe "vfs_getname=getname_flags:72 pathname=filename:ustring"
Failed to write event: Invalid argument
Error: Failed to add events.
#
Fix this by adding type 'ustring' in function
convert_variable_type().
Using ustring succeeds (output after):
# ./perf probe "vfs_getname=getname_flags:72 pathname=filename:ustring"
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=filename:ustring)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
#
Note: This issue also exists on x86, it is not s390 specific.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: sumanthk@linux.ibm.com
Link: http://lore.kernel.org/lkml/20200120132011.64698-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix undefined reference linker errors when building runqslower with
gcc 7.4.0 on Ubuntu 18.04.
The issue is with misplaced -lelf, -lz options in Makefile:
$(Q)$(CC) $(CFLAGS) -lelf -lz $^ -o $@
-lelf, -lz options should follow the list of target dependencies:
$(Q)$(CC) $(CFLAGS) $^ -lelf -lz -o $@
or after substitution
cc -g -Wall runqslower.o libbpf.a -lelf -lz -o runqslower
The current order of gcc params causes failure in libelf symbols resolution,
e.g. undefined reference to `elf_memory'
Fixes: 9c01546d26 ("tools/bpf: Add runqslower tool to tools/bpf")
Signed-off-by: Julia Kartseva <hex@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/908498f794661c44dca54da9e09dc0c382df6fcb.1580425879.git.hex@fb.com
uapi:
- dma-buf heaps added (and fixed)
- command line add support for panel oreientation
- command line allow overriding penguin count
drm:
- mipi dsi definition updates
- lockdep annotations for dma_resv
- remove dma-buf kmap/kunmap support
- constify fb_ops in all fbdev drivers
- MST fix for daisy chained hotplug-
- CTA-861-G modes with VIC >= 193 added
- fix drm_panel_of_backlight export
- LVDS decoder support
- more device based logging support
- scanline alighment for dumb buffers
- MST DSC helpers
scheduler:
- documentation fixes
- job distribution improvements
panel:
- Logic PD type 28 panel support
- Jimax8729d MIPI-DSI
- igenic JZ4770
- generic DSI devicetree bindings
- sony acx424AKP panel
- Leadtek LTK500HD1829
- xinpeng XPP055C272
- AUO B116XAK01
- GiantPlus GPM940B0
- BOE NV140FHM-N49
- Satoz SAT050AT40H12R2
- Sharp LS020B1DD01D panels.
ttm:
- use blocking WW lock
i915:
- hw/uapi state separation
- Lock annotation improvements
- selftest improvements
- ICL/TGL DSI VDSC support
- VBT parsing improvments
- Display refactoring
- DSI updates + fixes
- HDCP 2.2 for CFL
- CML PCI ID fixes
- GLK+ fbc fix
- PSR fixes
- GEN/GT refactor improvments
- DP MST fixes
- switch context id alloc to xarray
- workaround updates
- LMEM debugfs support
- tiled monitor fixes
- ICL+ clock gating programming removed
- DP MST disable sequence fixed
- LMEM discontiguous object maps
- prefaulting for discontiguous objects
- use LMEM for dumb buffers if possible
- add LMEM mmap support
amdgpu:
- enable sync object timelines for vulkan
- MST atomic routines
- enable MST DSC support
- add DMCUB display microengine support
- DC OEM i2c support
- Renoir DC fixes
- Initial HDCP 2.x support
- BACO support for Arcturus
- Use BACO for runtime PM power save
- gfxoff on navi10
- gfx10 golden updates and fixes
- DCN support on POWER
- GFXOFF for raven1 refresh
- MM engine idle handlers cleanup
- 10bpc EDP panel fixes
- renoir watermark fixes
- SR-IOV fixes
- Arcturus VCN fixes
- GDDR6 training fixes
- freesync fixes
- Pollock support
amdkfd:
- unify more codepath with amdgpu
- use KIQ to setup HIQ rather than MMIO
radeon:
- fix vma fault handler race
- PPC DMA fix
- register check fixes for r100/r200
nouveau:
- mmap_sem vs dma_resv fix
- rewrite the ACR secure boot code for Turing
- TU10x graphics engine support (TU11x pending)
- Page kind mapping for turing
- 10-bit LUT support
- GP10B Tegra fixes
- HD audio regression fix
hisilicon/hibmc:
- use generic fbdev code and helpers
rockchip:
- dsi/px30 support
virtio:
- fb damage support
- static some functions
vc4:
- use dma_resv lock wrappers
msm:
- use dma_resv lock wrappers
- sc7180 display + DSI support
- a618 support
- UBWC support improvements
vmwgfx:
- updates + new logging uapi
exynos:
- enable/disable callback cleanups
etnaviv:
- use dma_resv lock wrappers
atmel-hlcdc:
- clock fixes
mediatek:
- cmdq support
- non-smooth cursor fixes
- ctm property support
sun4i:
- suspend support
- A64 mipi dsi support
rcar-du:
- Color management module support
- LVDS encoder dual-link support
- R8A77980 support
analogic:
- add support for an6345
ast:
- atomic modeset support
- primary plane garbage fix
arcgpu:
- fixes for fourcc handling
tegra:
- minor fixes and improvments
mcde:
- vblank support
meson:
- OSD1 plane AFBC commit
gma500:
- add pageflip support
- reomve global drm_dev
komeda:
- tweak debugfs output
- d32 support
- runtime PM suppotr
udl:
- use generic shmem helpers
- cleanup and fixes
-----BEGIN PGP SIGNATURE-----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=oFrI
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Davbe Airlie:
"This is the main pull request for graphics for 5.6. Usual selection of
changes all over.
I've got one outstanding vmwgfx pull that touches mm so kept it
separate until after all of this lands. I'll try and get it to you
soon after this, but it might be early next week (nothing wrong with
code, just my schedule is messy)
This also hits a lot of fbdev drivers with some cleanups.
Other notables:
- vulkan timeline semaphore support added to syncobjs
- nouveau turing secureboot/graphics support
- Displayport MST display stream compression support
Detailed summary:
uapi:
- dma-buf heaps added (and fixed)
- command line add support for panel oreientation
- command line allow overriding penguin count
drm:
- mipi dsi definition updates
- lockdep annotations for dma_resv
- remove dma-buf kmap/kunmap support
- constify fb_ops in all fbdev drivers
- MST fix for daisy chained hotplug-
- CTA-861-G modes with VIC >= 193 added
- fix drm_panel_of_backlight export
- LVDS decoder support
- more device based logging support
- scanline alighment for dumb buffers
- MST DSC helpers
scheduler:
- documentation fixes
- job distribution improvements
panel:
- Logic PD type 28 panel support
- Jimax8729d MIPI-DSI
- igenic JZ4770
- generic DSI devicetree bindings
- sony acx424AKP panel
- Leadtek LTK500HD1829
- xinpeng XPP055C272
- AUO B116XAK01
- GiantPlus GPM940B0
- BOE NV140FHM-N49
- Satoz SAT050AT40H12R2
- Sharp LS020B1DD01D panels.
ttm:
- use blocking WW lock
i915:
- hw/uapi state separation
- Lock annotation improvements
- selftest improvements
- ICL/TGL DSI VDSC support
- VBT parsing improvments
- Display refactoring
- DSI updates + fixes
- HDCP 2.2 for CFL
- CML PCI ID fixes
- GLK+ fbc fix
- PSR fixes
- GEN/GT refactor improvments
- DP MST fixes
- switch context id alloc to xarray
- workaround updates
- LMEM debugfs support
- tiled monitor fixes
- ICL+ clock gating programming removed
- DP MST disable sequence fixed
- LMEM discontiguous object maps
- prefaulting for discontiguous objects
- use LMEM for dumb buffers if possible
- add LMEM mmap support
amdgpu:
- enable sync object timelines for vulkan
- MST atomic routines
- enable MST DSC support
- add DMCUB display microengine support
- DC OEM i2c support
- Renoir DC fixes
- Initial HDCP 2.x support
- BACO support for Arcturus
- Use BACO for runtime PM power save
- gfxoff on navi10
- gfx10 golden updates and fixes
- DCN support on POWER
- GFXOFF for raven1 refresh
- MM engine idle handlers cleanup
- 10bpc EDP panel fixes
- renoir watermark fixes
- SR-IOV fixes
- Arcturus VCN fixes
- GDDR6 training fixes
- freesync fixes
- Pollock support
amdkfd:
- unify more codepath with amdgpu
- use KIQ to setup HIQ rather than MMIO
radeon:
- fix vma fault handler race
- PPC DMA fix
- register check fixes for r100/r200
nouveau:
- mmap_sem vs dma_resv fix
- rewrite the ACR secure boot code for Turing
- TU10x graphics engine support (TU11x pending)
- Page kind mapping for turing
- 10-bit LUT support
- GP10B Tegra fixes
- HD audio regression fix
hisilicon/hibmc:
- use generic fbdev code and helpers
rockchip:
- dsi/px30 support
virtio:
- fb damage support
- static some functions
vc4:
- use dma_resv lock wrappers
msm:
- use dma_resv lock wrappers
- sc7180 display + DSI support
- a618 support
- UBWC support improvements
vmwgfx:
- updates + new logging uapi
exynos:
- enable/disable callback cleanups
etnaviv:
- use dma_resv lock wrappers
atmel-hlcdc:
- clock fixes
mediatek:
- cmdq support
- non-smooth cursor fixes
- ctm property support
sun4i:
- suspend support
- A64 mipi dsi support
rcar-du:
- Color management module support
- LVDS encoder dual-link support
- R8A77980 support
analogic:
- add support for an6345
ast:
- atomic modeset support
- primary plane garbage fix
arcgpu:
- fixes for fourcc handling
tegra:
- minor fixes and improvments
mcde:
- vblank support
meson:
- OSD1 plane AFBC commit
gma500:
- add pageflip support
- reomve global drm_dev
komeda:
- tweak debugfs output
- d32 support
- runtime PM suppotr
udl:
- use generic shmem helpers
- cleanup and fixes"
* tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits)
drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing
drm/nouveau/acr: return error when registering LSF if ACR not supported
drm/nouveau/disp/gv100-: not all channel types support reporting error codes
drm/nouveau/disp/nv50-: prevent oops when no channel method map provided
drm/nouveau: support synchronous pushbuf submission
drm/nouveau: signal pending fences when channel has been killed
drm/nouveau: reject attempts to submit to dead channels
drm/nouveau: zero vma pointer even if we only unreference it rather than free
drm/nouveau: Add HD-audio component notifier support
drm/nouveau: fix build error without CONFIG_IOMMU_API
drm/nouveau/kms/nv04: remove set but not used variable 'width'
drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector'
drm/nouveau/mmu: fix comptag memory leak
drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc
drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping
drm/exynos: Rename Exynos to lowercase
drm/exynos: change callback names
drm/mst: Don't do atomic checks over disabled managers
drm/amdgpu: add the lost mutex_init back
drm/amd/display: skip opp blank or unblank if test pattern enabled
...
Commit a2408a7036 ("perf evlist: Maintain evlist->all_cpus")
introduces a test case for cpumap merge operation, see functions
perf_cpu_map__merge() and test__cpu_map_merge().
The test case fails on s390 with this error message:
[root@m35lp76 perf]# ./perf test -Fvvvvv 52
52: Merge cpu map :
--- start ---
cpumask list: 1-2,4-5,7
perf: /root/linux/tools/include/linux/refcount.h:131:\
refcount_sub_and_test: Assertion `!(new > val)' failed.
Aborted (core dumped)
[root@m35lp76 perf]#
The root cause is in the function test__cpu_map_merge():
It creates two cpu_maps named 'a' and 'b':
struct perf_cpu_map *a = perf_cpu_map__new("4,2,1");
struct perf_cpu_map *b = perf_cpu_map__new("4,5,7");
and creates a third map named 'c' which is the result of
the merge of maps a and b:
struct perf_cpu_map *c = perf_cpu_map__merge(a, b);
After some verifaction of the merged cpu_map all three
of them are have their reference count reduced and are
freed:
perf_cpu_map__put(a); (1)
perf_cpu_map__put(b);
perf_cpu_map__put(c);
The release of perf_cpu_map__put(a) is wrong. The map
is already released and free'ed as part of the function
perf_cpu_map__merge(struct perf_cpu_map *orig,
| struct perf_cpu_map *other)
+--> perf_cpu_map__put(orig);
|
+--> cpu_map__delete(orig)
At the end perf_cpu_map_put() is called for map 'orig'
alias 'a' and since the reference count is 1, the map
is deleted, as can be seen by the following gdb trace:
(gdb) where
#0 tcache_put (tc_idx=0, chunk=0x156cc30) at malloc.c:2940
#1 _int_free (av=0x3fffd49ee80 <main_arena>, p=0x156cc30,
have_lock=<optimized out>) at malloc.c:4222
#2 0x00000000012d5e78 in cpu_map__delete (map=0x156cc40) at cpumap.c:31
#3 0x00000000012d5f7a in perf_cpu_map__put (map=0x156cc40) at cpumap.c:45
#4 0x00000000012d723a in perf_cpu_map__merge (orig=0x156cc40,
other=0x156cc60) at cpumap.c:343
#5 0x000000000110cdd0 in test__cpu_map_merge (
test=0x14ea6c8 <generic_tests+2856>, subtest=-1) at tests/cpumap.c:128
Thus the perf_cpu_map__put(a) (see (1) above) frees map 'a'
a second time and causes the failure. Fix this be removing that
function call.
Output after:
[root@m35lp76 perf]# ./perf test -Fvvvvv 52
52: Merge cpu map :
--- start ---
cpumask list: 1-2,4-5,7
---- end ----
Merge cpu map: Ok
[root@m35lp76 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: sumanthk@linux.ibm.com
Link: http://lore.kernel.org/lkml/20200120132011.64698-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf with CoreSight fails to record trace data with command:
perf record -e cs_etm/@tmc_etr0/u --per-thread ls
failed to set sink "" on event cs_etm/@tmc_etr0/u with 21 (Is a
directory)/perf/
This failure is root caused with the commit 1dc925568f ("perf
parse: Add a deep delete for parse event terms").
The log shows, cs_etm fails to parse the sink attribution; cs_etm event
relies on the event configuration to pass sink name, but the event
specific configuration data cannot be passed properly with flow:
get_config_terms()
ADD_CONFIG_TERM(DRV_CFG, term->val.str);
__t->val.str = term->val.str;
`> __t->val.str is assigned to term->val.str;
parse_events_terms__purge()
parse_events_term__delete()
zfree(&term->val.str);
`> term->val.str is freed and assigned to NULL pointer;
cs_etm_set_sink_attr()
sink = __t->val.str;
`> sink string has been freed.
To fix this issue, in the function get_config_terms(), this patch
changes to use strdup() for allocation a new duplicate string rather
than directly assignment string pointer.
This patch addes a new field 'free_str' in the data structure
perf_evsel_config_term; 'free_str' is set to true when the union is used
as a string pointer; thus it can tell perf_evsel__free_config_terms() to
free the string.
Fixes: 1dc925568f ("perf parse: Add a deep delete for parse event terms")
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200117055251.24058-2-leo.yan@linaro.org
[ Use zfree() in perf_evsel__free_config_terms ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
:# modified: tools/perf/util/evsel_config.h
The struct perf_evsel_config_term::val is a union which contains fields
'callgraph', 'drv_cfg' and 'branch' as string pointers. This leads to
the complex code logic for handling every type's string separately, and
it's hard to release string as a general way.
This patch refactors the structure to add a common field 'str' in the
'val' union as string pointer and remove the other three fields
'callgraph', 'drv_cfg' and 'branch'. Without passing field name, the
patch simplifies the string handling with macro ADD_CONFIG_TERM_STR()
for string pointer assignment.
This patch fixes multiple warnings of line over 80 characters detected
by checkpatch tool.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200117055251.24058-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXjFo8wAKCRCRxhvAZXjc
omaGAQDVwCHQekqxp2eC8EJH4Pkt+Bn1BLrA25stlTo93YBPHgEAsPVUCRNcrZAl
VncYmxCfpt3Yu0S/MTVXu5xrRiIXPQk=
=uqTN
-----END PGP SIGNATURE-----
Merge tag 'threads-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread management updates from Christian Brauner:
"Sargun Dhillon over the last cycle has worked on the pidfd_getfd()
syscall.
This syscall allows for the retrieval of file descriptors of a process
based on its pidfd. A task needs to have ptrace_may_access()
permissions with PTRACE_MODE_ATTACH_REALCREDS (suggested by Oleg and
Andy) on the target.
One of the main use-cases is in combination with seccomp's user
notification feature. As a reminder, seccomp's user notification
feature was made available in v5.0. It allows a task to retrieve a
file descriptor for its seccomp filter. The file descriptor is usually
handed of to a more privileged supervising process. The supervisor can
then listen for syscall events caught by the seccomp filter of the
supervisee and perform actions in lieu of the supervisee, usually
emulating syscalls. pidfd_getfd() is needed to expand its uses.
There are currently two major users that wait on pidfd_getfd() and one
future user:
- Netflix, Sargun said, is working on a service mesh where users
should be able to connect to a dns-based VIP. When a user connects
to e.g. 1.2.3.4:80 that runs e.g. service "foo" they will be
redirected to an envoy process. This service mesh uses seccomp user
notifications and pidfd to intercept all connect calls and instead
of connecting them to 1.2.3.4:80 connects them to e.g.
127.0.0.1:8080.
- LXD uses the seccomp notifier heavily to intercept and emulate
mknod() and mount() syscalls for unprivileged containers/processes.
With pidfd_getfd() more uses-cases e.g. bridging socket connections
will be possible.
- The patchset has also seen some interest from the browser corner.
Right now, Firefox is using a SECCOMP_RET_TRAP sandbox managed by a
broker process. In the future glibc will start blocking all signals
during dlopen() rendering this type of sandbox impossible. Hence,
in the future Firefox will switch to a seccomp-user-nofication
based sandbox which also makes use of file descriptor retrieval.
The thread for this can be found at
https://sourceware.org/ml/libc-alpha/2019-12/msg00079.html
With pidfd_getfd() it is e.g. possible to bridge socket connections
for the supervisee (binding to a privileged port) and taking actions
on file descriptors on behalf of the supervisee in general.
Sargun's first version was using an ioctl on pidfds but various people
pushed for it to be a proper syscall which he duely implemented as
well over various review cycles. Selftests are of course included.
I've also added instructions how to deal with merge conflicts below.
There's also a small fix coming from the kernel mentee project to
correctly annotate struct sighand_struct with __rcu to fix various
sparse warnings. We've received a few more such fixes and even though
they are mostly trivial I've decided to postpone them until after -rc1
since they came in rather late and I don't want to risk introducing
build warnings.
Finally, there's a new prctl() command PR_{G,S}ET_IO_FLUSHER which is
needed to avoid allocation recursions triggerable by storage drivers
that have userspace parts that run in the IO path (e.g. dm-multipath,
iscsi, etc). These allocation recursions deadlock the device.
The new prctl() allows such privileged userspace components to avoid
allocation recursions by setting the PF_MEMALLOC_NOIO and
PF_LESS_THROTTLE flags. The patch carries the necessary acks from the
relevant maintainers and is routed here as part of prctl()
thread-management."
* tag 'threads-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
prctl: PR_{G,S}ET_IO_FLUSHER to support controlling memory reclaim
sched.h: Annotate sighand_struct with __rcu
test: Add test for pidfd getfd
arch: wire up pidfd_getfd syscall
pid: Implement pidfd_getfd syscall
vfs, fdtable: Add fget_task helper
This Kselftest update for Linux 5.6-rc1 consists of several fixes to
framework and individual tests. In addition, it enables LKDTM tests
adding lkdtm target to kselftest Makefile.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl4xpawACgkQCwJExA0N
Qxx8GhAAqj9jXpFs4xqfOn2a3RUCZiH4u6pGE/YQaFLD42AZYRES7P9MjOd3prJN
CKlyduMx4JzXubZ9guAKvFw4VAvptKvqjyavT0vBe8VYaXWENr5qAeNtojvv8AT+
twOH/atc37zj81xR/l9OOqIZIgLibDq9GZNTPxgDWdCdG25FY07hfDHjlvg5uVIv
+PfF/N5/laMsrmdqUtujGuJt3n6VUatxN8zR67nJs7i1QaoFMbOCvPYVE4beNlE4
pvnTqnkN3dNeQUWA0Qf5E/SbCKA+4ULMhHNvBmifERYi5cCfm6tAIddFpRUNXDXf
IHuJ2Rvm5r4lhcUShb38ky3wb3etYDWw4fDE8pNL8yr8fXmg9gmsHHfeR8s625Mn
Ly3VfqlOhrDs0uOGzya0NpzZ7gpjfaryjObfQ2t6jlG5O1zt5UtXfA9PhLvwE3VC
lg3rrY5UiSaWrqkS9yDlSpKZ8aYeLWhnFLCltmr3o46WaGKhk+1afYvQQOeuYANG
QTYnBhnQWzxB4b2q5F3MinRggm5STcG8gAAcNo//yiGtCZTrdsFwvzWBPlYp1m2R
2LlboNYeVKGFXVMqNB0S8/zZaFFoWd3fu+CmhGo4Hy6JqCk3HCuYcORYHrJIlxkB
KYm9b1A+sjcmSp80vlX+QK+fzQ03d2krcAqaKKuTjyYnxDxsJg4=
=/7fF
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest update from Shuah Khan:
"This Kselftest update consists of several fixes to framework and
individual tests.
In addition, it enables LKDTM tests adding lkdtm target to kselftest
Makefile"
* tag 'linux-kselftest-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: fix glob selftest
selftests: settings: tests can be in subsubdirs
kselftest: Minimise dependency of get_size on C library interfaces
selftests/livepatch: Remove unused local variable in set_ftrace_enabled()
selftests/livepatch: Replace set_dynamic_debug() with setup_config() in README
selftests/lkdtm: Add tests for LKDTM targets
selftests: Uninitialized variable in test_cgcore_proc_migration()
selftests: fix build behaviour on targets' failures
Pull openat2 support from Al Viro:
"This is the openat2() series from Aleksa Sarai.
I'm afraid that the rest of namei stuff will have to wait - it got
zero review the last time I'd posted #work.namei, and there had been a
leak in the posted series I'd caught only last weekend. I was going to
repost it on Monday, but the window opened and the odds of getting any
review during that... Oh, well.
Anyway, openat2 part should be ready; that _did_ get sane amount of
review and public testing, so here it comes"
From Aleksa's description of the series:
"For a very long time, extending openat(2) with new features has been
incredibly frustrating. This stems from the fact that openat(2) is
possibly the most famous counter-example to the mantra "don't silently
accept garbage from userspace" -- it doesn't check whether unknown
flags are present[1].
This means that (generally) the addition of new flags to openat(2) has
been fraught with backwards-compatibility issues (O_TMPFILE has to be
defined as __O_TMPFILE|O_DIRECTORY|[O_RDWR or O_WRONLY] to ensure old
kernels gave errors, since it's insecure to silently ignore the
flag[2]). All new security-related flags therefore have a tough road
to being added to openat(2).
Furthermore, the need for some sort of control over VFS's path
resolution (to avoid malicious paths resulting in inadvertent
breakouts) has been a very long-standing desire of many userspace
applications.
This patchset is a revival of Al Viro's old AT_NO_JUMPS[3] patchset
(which was a variant of David Drysdale's O_BENEATH patchset[4] which
was a spin-off of the Capsicum project[5]) with a few additions and
changes made based on the previous discussion within [6] as well as
others I felt were useful.
In line with the conclusions of the original discussion of
AT_NO_JUMPS, the flag has been split up into separate flags. However,
instead of being an openat(2) flag it is provided through a new
syscall openat2(2) which provides several other improvements to the
openat(2) interface (see the patch description for more details). The
following new LOOKUP_* flags are added:
LOOKUP_NO_XDEV:
Blocks all mountpoint crossings (upwards, downwards, or through
absolute links). Absolute pathnames alone in openat(2) do not
trigger this. Magic-link traversal which implies a vfsmount jump is
also blocked (though magic-link jumps on the same vfsmount are
permitted).
LOOKUP_NO_MAGICLINKS:
Blocks resolution through /proc/$pid/fd-style links. This is done
by blocking the usage of nd_jump_link() during resolution in a
filesystem. The term "magic-links" is used to match with the only
reference to these links in Documentation/, but I'm happy to change
the name.
It should be noted that this is different to the scope of
~LOOKUP_FOLLOW in that it applies to all path components. However,
you can do openat2(NO_FOLLOW|NO_MAGICLINKS) on a magic-link and it
will *not* fail (assuming that no parent component was a
magic-link), and you will have an fd for the magic-link.
In order to correctly detect magic-links, the introduction of a new
LOOKUP_MAGICLINK_JUMPED state flag was required.
LOOKUP_BENEATH:
Disallows escapes to outside the starting dirfd's
tree, using techniques such as ".." or absolute links. Absolute
paths in openat(2) are also disallowed.
Conceptually this flag is to ensure you "stay below" a certain
point in the filesystem tree -- but this requires some additional
to protect against various races that would allow escape using
"..".
Currently LOOKUP_BENEATH implies LOOKUP_NO_MAGICLINKS, because it
can trivially beam you around the filesystem (breaking the
protection). In future, there might be similar safety checks done
as in LOOKUP_IN_ROOT, but that requires more discussion.
In addition, two new flags are added that expand on the above ideas:
LOOKUP_NO_SYMLINKS:
Does what it says on the tin. No symlink resolution is allowed at
all, including magic-links. Just as with LOOKUP_NO_MAGICLINKS this
can still be used with NOFOLLOW to open an fd for the symlink as
long as no parent path had a symlink component.
LOOKUP_IN_ROOT:
This is an extension of LOOKUP_BENEATH that, rather than blocking
attempts to move past the root, forces all such movements to be
scoped to the starting point. This provides chroot(2)-like
protection but without the cost of a chroot(2) for each filesystem
operation, as well as being safe against race attacks that
chroot(2) is not.
If a race is detected (as with LOOKUP_BENEATH) then an error is
generated, and similar to LOOKUP_BENEATH it is not permitted to
cross magic-links with LOOKUP_IN_ROOT.
The primary need for this is from container runtimes, which
currently need to do symlink scoping in userspace[7] when opening
paths in a potentially malicious container.
There is a long list of CVEs that could have bene mitigated by
having RESOLVE_THIS_ROOT (such as CVE-2017-1002101,
CVE-2017-1002102, CVE-2018-15664, and CVE-2019-5736, just to name a
few).
In order to make all of the above more usable, I'm working on
libpathrs[8] which is a C-friendly library for safe path resolution.
It features a userspace-emulated backend if the kernel doesn't support
openat2(2). Hopefully we can get userspace to switch to using it, and
thus get openat2(2) support for free once it's ready.
Future work would include implementing things like
RESOLVE_NO_AUTOMOUNT and possibly a RESOLVE_NO_REMOTE (to allow
programs to be sure they don't hit DoSes though stale NFS handles)"
* 'work.openat2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Documentation: path-lookup: include new LOOKUP flags
selftests: add openat2(2) selftests
open: introduce openat2(2) syscall
namei: LOOKUP_{IN_ROOT,BENEATH}: permit limited ".." resolution
namei: LOOKUP_IN_ROOT: chroot-like scoped resolution
namei: LOOKUP_BENEATH: O_BENEATH-like scoped resolution
namei: LOOKUP_NO_XDEV: block mountpoint crossing
namei: LOOKUP_NO_MAGICLINKS: block magic-link resolution
namei: LOOKUP_NO_SYMLINKS: block symlink resolution
namei: allow set_root() to produce errors
namei: allow nd_jump_link() to produce errors
nsfs: clean-up ns_get_path() signature to return int
namei: only return -ECHILD from follow_dotdot_rcu()
Here is the big USB and Thunderbolt and PHY driver updates for 5.6-rc1.
With the advent of USB4, "Thunderbolt" has really become USB4, so the
renaming of the Kconfig option and starting to share subsystem code has
begun, hence both subsystems coming in through the same tree here.
PHY driver updates also touched USB drivers, so that is coming in
through here as well.
Major stuff included in here are:
- USB 4 initial support added (i.e. Thunderbolt)
- musb driver updates
- USB gadget driver updates
- PHY driver updates
- USB PHY driver updates
- lots of USB serial stuff fixed up
- USB typec updates
- USB-IP fixes
- lots of other smaller USB driver updates
All of these have been in linux-next for a while now (the usb-serial
tree is already tested in linux-next on its own before merged into
here), with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFTNw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynpKQCgrh2FoobS2x0oFg/OUHdjokQV/BYAoJGWLOmt
8S5cnsCuLq3w5qpCcBva
=PMGd
-----END PGP SIGNATURE-----
Merge tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt/PHY driver updates from Greg KH:
"Here is the big USB and Thunderbolt and PHY driver updates for
5.6-rc1.
With the advent of USB4, "Thunderbolt" has really become USB4, so the
renaming of the Kconfig option and starting to share subsystem code
has begun, hence both subsystems coming in through the same tree here.
PHY driver updates also touched USB drivers, so that is coming in
through here as well.
Major stuff included in here are:
- USB 4 initial support added (i.e. Thunderbolt)
- musb driver updates
- USB gadget driver updates
- PHY driver updates
- USB PHY driver updates
- lots of USB serial stuff fixed up
- USB typec updates
- USB-IP fixes
- lots of other smaller USB driver updates
All of these have been in linux-next for a while now (the usb-serial
tree is already tested in linux-next on its own before merged into
here), with no reported issues"
[ Removed an incorrect compile test enablement for PHY_EXYNOS5250_SATA
that causes configuration warnings - Linus ]
* tag 'usb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
Doc: ABI: add usb charger uevent
usb: phy: show USB charger type for user
usb: cdns3: fix spelling mistake and rework grammar in text
usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
USB: serial: cyberjack: fix spelling mistake "To" -> "Too"
USB: serial: ir-usb: simplify endpoint check
USB: serial: ir-usb: make set_termios synchronous
USB: serial: ir-usb: fix IrLAP framing
USB: serial: ir-usb: fix link-speed handling
USB: serial: ir-usb: add missing endpoint sanity check
usb: typec: fusb302: fix "op-sink-microwatt" default that was in mW
usb: typec: wcove: fix "op-sink-microwatt" default that was in mW
usb: dwc3: pci: add ID for the Intel Comet Lake -V variant
usb: typec: tcpci: mask event interrupts when remove driver
usb: host: xhci-tegra: set MODULE_FIRMWARE for tegra186
usb: chipidea: add inline for ci_hdrc_host_driver_init if host is not defined
usb: chipidea: handle single role for usb role class
usb: musb: fix spelling mistake: "periperal" -> "peripheral"
phy: ti: j721e-wiz: Fix build error without CONFIG_OF_ADDRESS
USB: usbfs: Always unlink URBs in reverse order
...
Pull networking updates from David Miller:
1) Add WireGuard
2) Add HE and TWT support to ath11k driver, from John Crispin.
3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.
4) Add variable window congestion control to TIPC, from Jon Maloy.
5) Add BCM84881 PHY driver, from Russell King.
6) Start adding netlink support for ethtool operations, from Michal
Kubecek.
7) Add XDP drop and TX action support to ena driver, from Sameeh
Jubran.
8) Add new ipv4 route notifications so that mlxsw driver does not have
to handle identical routes itself. From Ido Schimmel.
9) Add BPF dynamic program extensions, from Alexei Starovoitov.
10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.
11) Add support for macsec HW offloading, from Antoine Tenart.
12) Add initial support for MPTCP protocol, from Christoph Paasch,
Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.
13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
Cherian, and others.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
udp: segment looped gso packets correctly
netem: change mailing list
qed: FW 8.42.2.0 debug features
qed: rt init valid initialization changed
qed: Debug feature: ilt and mdump
qed: FW 8.42.2.0 Add fw overlay feature
qed: FW 8.42.2.0 HSI changes
qed: FW 8.42.2.0 iscsi/fcoe changes
qed: Add abstraction for different hsi values per chip
qed: FW 8.42.2.0 Additional ll2 type
qed: Use dmae to write to widebus registers in fw_funcs
qed: FW 8.42.2.0 Parser offsets modified
qed: FW 8.42.2.0 Queue Manager changes
qed: FW 8.42.2.0 Expose new registers and change windows
qed: FW 8.42.2.0 Internal ram offsets modifications
MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
Documentation: net: octeontx2: Add RVU HW and drivers overview
octeontx2-pf: ethtool RSS config support
octeontx2-pf: Add basic ethtool support
...
Processors have exceeded some of the fixed y-axis scale maximum values.
Change them to autoscale the y-axis.
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some syntax needs to be more rigorous for python 3.
Backwards compatibility tested with python 2.7
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This cpupower update for Linux 5.6-rc1 consists of a revert from
Thomas Renninger and a manpage correction from Brahadambal Srinivasan.
-----BEGIN PGP SIGNATURE-----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=CjtJ
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility updates for v5.6 from Shuah Khan:
"This cpupower update for Linux 5.6-rc1 consists of a revert
from Thomas Renninger and a manpage correction from Brahadambal
Srinivasan."
* tag 'linux-cpupower-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
Correction to manpage of cpupower
cpupower: Revert library ABI changes from commit ae2917093f
Pull x86 cpu-features updates from Ingo Molnar:
"The biggest change in this cycle was a large series from Sean
Christopherson to clean up the handling of VMX features. This both
fixes bugs/inconsistencies and makes the code more coherent and
future-proof.
There are also two cleanups and a minor TSX syslog messages
enhancement"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/cpu: Remove redundant cpu_detect_cache_sizes() call
x86/cpu: Print "VMX disabled" error message iff KVM is enabled
KVM: VMX: Allow KVM_INTEL when building for Centaur and/or Zhaoxin CPUs
perf/x86: Provide stubs of KVM helpers for non-Intel CPUs
KVM: VMX: Use VMX_FEATURE_* flags to define VMCS control bits
KVM: VMX: Check for full VMX support when verifying CPU compatibility
KVM: VMX: Use VMX feature flag to query BIOS enabling
KVM: VMX: Drop initialization of IA32_FEAT_CTL MSR
x86/cpufeatures: Add flag to track whether MSR IA32_FEAT_CTL is configured
x86/cpu: Set synthetic VMX cpufeatures during init_ia32_feat_ctl()
x86/cpu: Print VMX flags in /proc/cpuinfo using VMX_FEATURES_*
x86/cpu: Detect VMX features on Intel, Centaur and Zhaoxin CPUs
x86/vmx: Introduce VMX_FEATURES_*
x86/cpu: Clear VMX feature flag if VMX is not fully enabled
x86/zhaoxin: Use common IA32_FEAT_CTL MSR initialization
x86/centaur: Use common IA32_FEAT_CTL MSR initialization
x86/mce: WARN once if IA32_FEAT_CTL MSR is left unlocked
x86/intel: Initialize IA32_FEAT_CTL MSR at boot
tools/x86: Sync msr-index.h from kernel sources
selftests, kvm: Replace manual MSR defs with common msr-index.h
...
test.d/ftrace/func-filter-glob.tc is failing on s390 because it has
ARCH_INLINE_SPIN_LOCK and friends set to 'y'. So the usual
__raw_spin_lock symbol isn't in the ftrace function list. Change
'*aw*lock' to '*spin*lock' which would hopefully match some of the
locking functions on all platforms.
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull perf updates from Ingo Molnar:
"Kernel side changes:
- Ftrace is one of the last W^X violators (after this only KLP is
left). These patches move it over to the generic text_poke()
interface and thereby get rid of this oddity. This requires a
surprising amount of surgery, by Peter Zijlstra.
- x86/AMD PMUs: add support for 'Large Increment per Cycle Events' to
count certain types of events that have a special, quirky hw ABI
(by Kim Phillips)
- kprobes fixes by Masami Hiramatsu
Lots of tooling updates as well, the following subcommands were
updated: annotate/report/top, c2c, clang, record, report/top TUI,
sched timehist, tests; plus updates were done to the gtk ui, libperf,
headers and the parser"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
perf/x86/amd: Add support for Large Increment per Cycle Events
perf/x86/amd: Constrain Large Increment per Cycle events
perf/x86/intel/rapl: Add Comet Lake support
tracing: Initialize ret in syscall_enter_define_fields()
perf header: Use last modification time for timestamp
perf c2c: Fix return type for histogram sorting comparision functions
perf beauty sockaddr: Fix augmented syscall format warning
perf/ui/gtk: Fix gtk2 build
perf ui gtk: Add missing zalloc object
perf tools: Use %define api.pure full instead of %pure-parser
libperf: Setup initial evlist::all_cpus value
perf report: Fix no libunwind compiled warning break s390 issue
perf tools: Support --prefix/--prefix-strip
perf report: Clarify in help that --children is default
tools build: Fix test-clang.cpp with Clang 8+
perf clang: Fix build with Clang 9
kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic
tools lib: Fix builds when glibc contains strlcpy()
perf report/top: Make 'e' visible in the help and make it toggle showing callchains
perf report/top: Do not offer annotation for symbols without samples
...
Pull RCU updates from Ingo Molnar:
"The RCU changes in this cycle were:
- Expedited grace-period updates
- kfree_rcu() updates
- RCU list updates
- Preemptible RCU updates
- Torture-test updates
- Miscellaneous fixes
- Documentation updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits)
rcu: Remove unused stop-machine #include
powerpc: Remove comment about read_barrier_depends()
.mailmap: Add entries for old paulmck@kernel.org addresses
srcu: Apply *_ONCE() to ->srcu_last_gp_end
rcu: Switch force_qs_rnp() to for_each_leaf_node_cpu_mask()
rcu: Move rcu_{expedited,normal} definitions into rcupdate.h
rcu: Move gp_state_names[] and gp_state_getname() to tree_stall.h
rcu: Remove the declaration of call_rcu() in tree.h
rcu: Fix tracepoint tracking RCU CPU kthread utilization
rcu: Fix harmless omission of "CONFIG_" from #if condition
rcu: Avoid tick_dep_set_cpu() misordering
rcu: Provide wrappers for uses of ->rcu_read_lock_nesting
rcu: Use READ_ONCE() for ->expmask in rcu_read_unlock_special()
rcu: Clear ->rcu_read_unlock_special only once
rcu: Clear .exp_hint only when deferred quiescent state has been reported
rcu: Rename some instance of CONFIG_PREEMPTION to CONFIG_PREEMPT_RCU
rcu: Remove kfree_call_rcu_nobatch()
rcu: Remove kfree_rcu() special casing and lazy-callback handling
rcu: Add support for debug_objects debugging for kfree_rcu()
rcu: Add multiple in-flight batches of kfree_rcu() work
...
- Time namespace support:
If a container migrates from one host to another then it expects that
clocks based on MONOTONIC and BOOTTIME are not subject to
disruption. Due to different boot time and non-suspended runtime these
clocks can differ significantly on two hosts, in the worst case time
goes backwards which is a violation of the POSIX requirements.
The time namespace addresses this problem. It allows to set offsets for
clock MONOTONIC and BOOTTIME once after creation and before tasks are
associated with the namespace. These offsets are taken into account by
timers and timekeeping including the VDSO.
Offsets for wall clock based clocks (REALTIME/TAI) are not provided by
this mechanism. While in theory possible, the overhead and code
complexity would be immense and not justified by the esoteric potential
use cases which were discussed at Plumbers '18.
The overhead for tasks in the root namespace (host time offsets = 0) is
in the noise and great effort was made to ensure that especially in the
VDSO. If time namespace is disabled in the kernel configuration the
code is compiled out.
Kudos to Andrei Vagin and Dmitry Sofanov who implemented this feature
and kept on for more than a year addressing review comments, finding
better solutions. A pleasant experience.
- Overhaul of the alarmtimer device dependency handling to ensure that
the init/suspend/resume ordering is correct.
- A new clocksource/event driver for Microchip PIT64
- Suspend/resume support for the Hyper-V clocksource
- The usual pile of fixes, updates and improvements mostly in the
driver code.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl4vbTcTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoXT2D/96iJ3G9Snn2khEQP3XS2rYmtDGw7NO
m1n96falwWeGe6zreU80R2Jge5nLxQtNhRoMPLLee1GpHwRC6lvqEqgdZ4LMBrD2
JqV7Gzg8Urmdh+hpDsyTCpeEWEzoMKxiFOX8PxwctqUhM4szEe5iQg2YQsg85Jw2
vG6M93N2xwDILh4rhEMbKjo+5ZmYn7c1RQvpGOSmpKOj940W/N7H2HBsFhdaJ1Kw
FW5pFv1211PaU5RV2YNb2dMeeMTT1N3e2VN4Dkadoxp47pb+725gNHEBEjmV9poG
Lp4IhzGAPnj8zVD88icQZSTaK3gUHMClxprJ0Pf84WEtiH7SeGu8BPYyu77+oNDe
yzcctDJNyCWXkzmaP/fe/HLc0TStbvNAJ5Tagp4BC75gzebeb4/n8RtRT0fKeDYL
pxpDPKDAPU7p1JSjxiWAtshqjBycWNY3Z49bA7/VhKBhnv8BDyBPGlYd7/4xrbGr
RK7DQNXJwaJaiNJ7p5PiaFxGzNyB0B9sThD/slSlEInIKb4h9YzWr0TV+NB62VnB
sDcN+tpLbRPz5/5cHGGfxR0+zKWpfyai8pzbmmaXEaKssjRYwyvcac5EZdgbWpbK
k7CqAjoWLA2P+tGeePNJOf5JYK6Vmdyh4clmuwM0zOiRJ9NlWUyMf3z7QYILs4RO
UAI+6opYlZEPAw==
=x3qT
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The timekeeping and timers departement provides:
- Time namespace support:
If a container migrates from one host to another then it expects
that clocks based on MONOTONIC and BOOTTIME are not subject to
disruption. Due to different boot time and non-suspended runtime
these clocks can differ significantly on two hosts, in the worst
case time goes backwards which is a violation of the POSIX
requirements.
The time namespace addresses this problem. It allows to set offsets
for clock MONOTONIC and BOOTTIME once after creation and before
tasks are associated with the namespace. These offsets are taken
into account by timers and timekeeping including the VDSO.
Offsets for wall clock based clocks (REALTIME/TAI) are not provided
by this mechanism. While in theory possible, the overhead and code
complexity would be immense and not justified by the esoteric
potential use cases which were discussed at Plumbers '18.
The overhead for tasks in the root namespace (ie where host time
offsets = 0) is in the noise and great effort was made to ensure
that especially in the VDSO. If time namespace is disabled in the
kernel configuration the code is compiled out.
Kudos to Andrei Vagin and Dmitry Sofanov who implemented this
feature and kept on for more than a year addressing review
comments, finding better solutions. A pleasant experience.
- Overhaul of the alarmtimer device dependency handling to ensure
that the init/suspend/resume ordering is correct.
- A new clocksource/event driver for Microchip PIT64
- Suspend/resume support for the Hyper-V clocksource
- The usual pile of fixes, updates and improvements mostly in the
driver code"
* tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
alarmtimer: Make alarmtimer_get_rtcdev() a stub when CONFIG_RTC_CLASS=n
alarmtimer: Use wakeup source from alarmtimer platform device
alarmtimer: Make alarmtimer platform device child of RTC device
alarmtimer: Update alarmtimer_get_rtcdev() docs to reflect reality
hrtimer: Add missing sparse annotation for __run_timer()
lib/vdso: Only read hrtimer_res when needed in __cvdso_clock_getres()
MIPS: vdso: Define BUILD_VDSO32 when building a 32bit kernel
clocksource/drivers/hyper-v: Set TSC clocksource as default w/ InvariantTSC
clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksources
clocksource/drivers/timer-microchip-pit64b: Fix sparse warning
clocksource/drivers/exynos_mct: Rename Exynos to lowercase
clocksource/drivers/timer-ti-dm: Fix uninitialized pointer access
clocksource/drivers/timer-ti-dm: Switch to platform_get_irq
clocksource/drivers/timer-ti-dm: Convert to devm_platform_ioremap_resource
clocksource/drivers/em_sti: Fix variable declaration in em_sti_probe
clocksource/drivers/em_sti: Convert to devm_platform_ioremap_resource
clocksource/drivers/bcm2835_timer: Fix memory leak of timer
clocksource/drivers/cadence-ttc: Use ttc driver as platform driver
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support
clocksource/drivers/hyper-v: Reserve PAGE_SIZE space for tsc page
...
Pull cgroup updates from Tejun Heo:
- cgroup2 interface for hugetlb controller. I think this was the last
remaining bit which was missing from cgroup2
- fixes for race and a spurious warning in threaded cgroup handling
- other minor changes
* 'for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
iocost: Fix iocost_monitor.py due to helper type mismatch
cgroup: Prevent double killing of css when enabling threaded cgroup
cgroup: fix function name in comment
mm: hugetlb controller for cgroups v2
- remove ioremap_nocache given that is is equivalent to
ioremap everywhere
-----BEGIN PGP SIGNATURE-----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=TUCJ
-----END PGP SIGNATURE-----
Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap
Pull ioremap updates from Christoph Hellwig:
"Remove the ioremap_nocache API (plus wrappers) that are always
identical to ioremap"
* tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap:
remove ioremap_nocache and devm_ioremap_nocache
MIPS: define ioremap_nocache to ioremap
- Update the ACPICA code in the kernel to upstream revision
20200110 including:
* Update of copyright notices to 2020 (Bob Moore).
* Dispatcher fix to always generate buffer objects for the ASL
create_field() operator (Maximilian Luz).
* Debugger cleanup (Colin Ian King).
* Disassembler change to create buffer fields in
ACPI_PARSE_LOAD_PASS1 (Erik Kaneda).
* UNIX line ending support for non-windows builds in acpisrc
(Erik Kaneda).
- Update the list of ACPICA maintainers (Rafael Wysocki).
- Add Intel Tiger Lake ACPI device IDs to the ACPI DPTF, ACPI fan,
int340x_thermal and intel-hid drivers (Gayatri Kammela).
- Make the ACPI fan driver create additional sysfs attributes to
expose power states information for fans (Srinivas Pandruvada).
- Fix up the ACPI battery driver to deal with unexpected battery
capacity information in a better way (Hans de Goede).
- Add ACPI backlight quirks for Lenovo E41-25/45 and MSI MS-7721
boards (Aaron Ma, Hans de Goede).
- Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch
to the ACPI button driver (Jason Ekstrand).
- Drop TIMER_DEFERRABLE from the GHES polling mode timer function
flags to make it run precisely at the configured time (Bhaskar
Upadhaya).
- Fix race condition related to the reference counting of query
handlers in the ACPI EC driver (Rafael Wysocki).
- Fix ACPI tools build issue (Zhengyuan Liu).
- Replace dma_request_slave_channel() with dma_request_chan() in the
firmware guide documentation for ACPI (Peter Ujfalusi).
- Fix typo in a comment and clean up function parameter data type
inconsistencies (Kacper Piwiński, Tian Tao).
-----BEGIN PGP SIGNATURE-----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=qOut
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to the most recent upstream
revision (20200110), add new hardware support to a handful of ACPI
drivers, make the ACPI fan driver expose power states information for
fans, add some more quirks, fix bugs and clean up assorted things.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20200110
including:
- Update of copyright notices to 2020 (Bob Moore).
- Dispatcher fix to always generate buffer objects for the ASL
create_field() operator (Maximilian Luz).
- Debugger cleanup (Colin Ian King).
- Disassembler change to create buffer fields in
ACPI_PARSE_LOAD_PASS1 (Erik Kaneda).
- UNIX line ending support for non-windows builds in acpisrc (Erik
Kaneda).
- Update the list of ACPICA maintainers (Rafael Wysocki).
- Add Intel Tiger Lake ACPI device IDs to the ACPI DPTF, ACPI fan,
int340x_thermal and intel-hid drivers (Gayatri Kammela).
- Make the ACPI fan driver create additional sysfs attributes to
expose power states information for fans (Srinivas Pandruvada).
- Fix up the ACPI battery driver to deal with unexpected battery
capacity information in a better way (Hans de Goede).
- Add ACPI backlight quirks for Lenovo E41-25/45 and MSI MS-7721
boards (Aaron Ma, Hans de Goede).
- Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch to
the ACPI button driver (Jason Ekstrand).
- Drop TIMER_DEFERRABLE from the GHES polling mode timer function
flags to make it run precisely at the configured time (Bhaskar
Upadhaya).
- Fix race condition related to the reference counting of query
handlers in the ACPI EC driver (Rafael Wysocki).
- Fix ACPI tools build issue (Zhengyuan Liu).
- Replace dma_request_slave_channel() with dma_request_chan() in the
firmware guide documentation for ACPI (Peter Ujfalusi).
- Fix typo in a comment and clean up function parameter data type
inconsistencies (Kacper Piwiński, Tian Tao)"
* tag 'acpi-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
ACPICA: Update version to 20200110
ACPICA: All acpica: Update copyrights to 2020 Including tool signons.
apei/ghes: Do not delay GHES polling
ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch
ACPI: PPTT: Consistently use unsigned int as parameter type
ACPI: EC: Reference count query handlers under lock
ACPICA: Update the list of maintainers
ACPICA: Update version to 20191213
ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator
ACPICA: acpisrc: add unix line ending support for non-windows build
ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1
ACPICA: debugger: fix spelling mistake "adress" -> "address"
ACPI: video: Do not export a non working backlight interface on MSI MS-7721 boards
docs: firmware-guide: ACPI: Replace dma_request_slave_channel() with dma_request_chan()
thermal: int340x_thermal: Add Tiger Lake ACPI device IDs
platform/x86: intel-hid: Add Tiger Lake ACPI device ID
ACPI: fan: Add Tiger Lake ACPI device ID
ACPI: DPTF: Add Tiger Lake ACPI device IDs
ACPI: fan: Expose fan performance state information
tools/power/acpi: fix compilation error
...
* Enable thermal policy for ASUS TUF FX705DY/FX505DY
* Support left round button on ASUS N56VB
* Support new Mellanox platforms of basic class VMOD0009 and VMOD0010
* Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC driver
* Big clean up to Intel PMC core, PMC IPC and SCU IPC drivers
* Touchscreen support for the PiPO W11 tablet
The following is an automated git shortlog grouped by driver:
asus-nb-wmi:
- Support left round button on N56VB
asus-wmi:
- Fix keyboard brightness cannot be set to 0
- Set throttle thermal policy to default
- Support throttle thermal policy
Documentation/ABI:
- Add new attribute for mlxreg-io sysfs interfaces
- Style changes
- Add missed attribute for mlxreg-io sysfs interfaces
- Fix documentation inconsistency for mlxreg-io sysfs interfaces
GPD pocket fan:
- Allow somewhat lower/higher temperature limits
- Use default values when wrong modparams are given
intel_atomisp2_pm:
- Spelling fixes
- Refactor timeout loop
intel_mid_powerbtn:
- Take a copy of ddata
intel_pmc_core:
- update Comet Lake platform driver
- Fix spelling of MHz unit
- Fix indentation in function definitions
- Put more stuff under #ifdef DEBUG_FS
- Respect error code of kstrtou32_from_user()
- Add Intel Elkhart Lake support
- Add Intel Tiger Lake support
- Make debugfs entry for pch_ip_power_gating_status conditional
- Create platform dependent bitmap structs
- Remove unnecessary assignments
- Clean up: Remove comma after the termination line
intel_pmc_ipc:
- Switch to use driver->dev_groups
- Propagate error from kstrtoul()
- Use octal permissions in sysfs attributes
- Get rid of unnecessary includes
- Drop ipc_data_readb()
- Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
- Make intel_pmc_ipc_raw_cmd() static
- Make intel_pmc_ipc_simple_command() static
- Make intel_pmc_gcr_update() static
intel_scu_ipc:
- Reformat kernel-doc comments of exported functions
- Drop intel_scu_ipc_raw_command()
- Drop intel_scu_ipc_io[read|write][8|16]()
- Drop unused macros
- Drop unused prototype intel_scu_ipc_fw_update()
- Sleeping is fine when polling
- Drop intel_scu_ipc_i2c_cntrl()
- Remove Lincroft support
- Add constants for register offsets
- Fix interrupt support
intel_scu_ipcutil:
- Remove default y from Kconfig
intel_telemetry_debugfs:
- Respect error code of kstrtou32_from_user()
intel_telemetry_pltdrv:
- use devm_platform_ioremap_resource()
mlx-platform:
- Add support for next generation systems
- Add support for new capability register
- Add support for new system type
- Set system mux configuration based on system type
- Add more definitions for system attributes
- Cosmetic changes
platform/mellanox:
- mlxreg-hotplug: Add support for new capability register
- fix potential deadlock in the tmfifo driver
tools/power/x86/intel-speed-select:
- Update version
- Change the order for clos disable
- Fix result display for turbo-freq auto mode
- Add support for core-power discovery
- Allow additional core-power mailbox commands
- Update MAINTAINERS for the intel uncore frequency control
- Add support for Uncore frequency control
touchscreen_dmi:
- Fix indentation in several places
- Add info for the PiPO W11 tablet
-----BEGIN PGP SIGNATURE-----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=rMop
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- Enable thermal policy for ASUS TUF FX705DY/FX505DY
- Support left round button on ASUS N56VB
- Support new Mellanox platforms of basic class VMOD0009 and VMOD0010
- Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC
driver
- Big clean-up to Intel PMC core, PMC IPC and SCU IPC drivers
- Touchscreen support for the PiPO W11 tablet
* tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
platform/x86: intel_pmc_ipc: Switch to use driver->dev_groups
platform/x86: intel_pmc_ipc: Propagate error from kstrtoul()
platform/x86: intel_pmc_ipc: Use octal permissions in sysfs attributes
platform/x86: intel_pmc_ipc: Get rid of unnecessary includes
platform/x86: intel_pmc_ipc: Drop ipc_data_readb()
platform/x86: intel_pmc_ipc: Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_raw_cmd() static
platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_simple_command() static
platform/x86: intel_pmc_ipc: Make intel_pmc_gcr_update() static
platform/x86: intel_scu_ipc: Reformat kernel-doc comments of exported functions
platform/x86: intel_scu_ipc: Drop intel_scu_ipc_raw_command()
platform/x86: intel_scu_ipc: Drop intel_scu_ipc_io[read|write][8|16]()
platform/x86: intel_scu_ipc: Drop unused macros
platform/x86: intel_scu_ipc: Drop unused prototype intel_scu_ipc_fw_update()
platform/x86: intel_scu_ipc: Sleeping is fine when polling
platform/x86: intel_scu_ipc: Drop intel_scu_ipc_i2c_cntrl()
platform/x86: intel_scu_ipc: Remove Lincroft support
platform/x86: intel_scu_ipc: Add constants for register offsets
platform/x86: intel_scu_ipc: Fix interrupt support
platform/x86: intel_scu_ipcutil: Remove default y from Kconfig
...
Commit 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second
timeout per test") adds support for a new per-test-directory "settings"
file. But this only works for tests not in a sub-subdirectories, e.g.
- tools/testing/selftests/rtc (rtc) is OK,
- tools/testing/selftests/net/mptcp (net/mptcp) is not.
We have to increase the timeout for net/mptcp tests which are not
upstreamed yet but this fix is valid for other tests if they need to add
a "settings" file, see the full list with:
tools/testing/selftests/*/*/**/Makefile
Note that this patch changes the text header message printed at the end
of the execution but this text is modified only for the tests that are
in sub-subdirectories, e.g.
ok 1 selftests: net/mptcp: mptcp_connect.sh
Before we had:
ok 1 selftests: mptcp: mptcp_connect.sh
But showing the full target name is probably better, just in case a
subsubdir has the same name as another one in another subdirectory.
Fixes: 852c8cbf34 (selftests/kselftest/runner.sh: Add 45 second timeout per test)
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Manpage of cpupower is listing wrong sub-commands in "See Also"
section. The option for cpupower-idle(1) should actually be
cpupower-idle-info(1) and cpupower-idle-set(1). This patch corrects
this anomaly.
Signed-off-by: Brahadambal Srinivasan <latha@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-01-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 20 non-merge commits during the last 5 day(s) which contain
a total of 24 files changed, 433 insertions(+), 104 deletions(-).
The main changes are:
1) Make BPF trampolines and dispatcher aware for the stack unwinder, from Jiri Olsa.
2) Improve handling of failed CO-RE relocations in libbpf, from Andrii Nakryiko.
3) Several fixes to BPF sockmap and reuseport selftests, from Lorenz Bauer.
4) Various cleanups in BPF devmap's XDP flush code, from John Fastabend.
5) Fix BPF flow dissector when used with port ranges, from Yoshiki Komachi.
6) Fix bpffs' map_seq_next callback to always inc position index, from Vasily Averin.
7) Allow overriding LLVM tooling for runqslower utility, from Andrey Ignatov.
8) Silence false-positive lockdep splats in devmap hash lookup, from Amol Grover.
9) Fix fentry/fexit selftests to initialize a variable before use, from John Sperbeck.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a simple test to make sure that a filter based on specified port
range classifies packets correctly.
Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Petar Penkov <ppenkov@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200117070533.402240-3-komachi.yoshiki@gmail.com
* acpica:
ACPICA: Update version to 20200110
ACPICA: All acpica: Update copyrights to 2020 Including tool signons.
ACPICA: Update the list of maintainers
ACPICA: Update version to 20191213
ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator
ACPICA: acpisrc: add unix line ending support for non-windows build
ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1
ACPICA: debugger: fix spelling mistake "adress" -> "address"
tools/testing/selftests/bpf/Makefile supports overriding clang, llc and
other tools so that custom ones can be used instead of those from PATH.
It's convinient and heavily used by some users.
Apply same rules to runqslower/Makefile.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200124224142.1833678-1-rdna@fb.com
This test covers functionality and stability of the newly added
nftables set implementation supporting concatenation of ranged
fields.
For some selected set expression types, test:
- correctness, by checking that packets match or don't
- concurrency, by attempting races between insertion, deletion, lookup
- timeout feature, checking that packets don't match expired entries
and (roughly) estimate matching rates, comparing to baselines for
simple drop on netdev ingress hook and for hash and rbtrees sets.
In order to send packets, this needs one of sendip, netcat or bash.
To flood with traffic, iperf3, iperf and netperf are supported. For
performance measurements, this relies on the sample pktgen script
pktgen_bench_xmit_mode_netif_receive.sh.
If none of the tools suitable for a given test are available, specific
tests will be skipped.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The state machine in the hv_utils driver can run out of order in some
corner cases, e.g. if the kvp daemon doesn't call write() fast enough
due to some reason, kvp_timeout_func() can run first and move the state
to HVUTIL_READY; next, when kvp_on_msg() is called it returns -EINVAL
since kvp_transaction.state is smaller than HVUTIL_USERSPACE_REQ; later,
the daemon's write() gets an error -EINVAL, and the daemon will exit().
We can reproduce the issue by sending a SIGSTOP signal to the daemon, wait
for 1 minute, and send a SIGCONT signal to the daemon: the daemon will
exit() quickly.
We can fix the issue by forcing a reset of the device (which means the
daemon can close() and open() the device again) and doing extra necessary
clean-up.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
There's limit of 40 programs tht can be attached
to trampoline for one function. Adding test that
tries to attach that many plus one extra that needs
to fail.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200123161508.915203-4-jolsa@kernel.org
Some newer cards supported by aacraid can take up to 40s to recover
after an EEH event. This causes spurious failures in the basic EEH
self-test since the current maximim timeout is only 30s.
Fix the immediate issue by bumping the timeout to a default of 60s,
and allow the wait time to be specified via an environmental variable
(EEH_MAX_WAIT).
Reported-by: Steve Best <sbest@redhat.com>
Suggested-by: Douglas Miller <dougmill@us.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200122031125.25991-1-oohall@gmail.com
Add a test that runs traffic across a port throttled with TBF. The test
checks that the observed throughput is within +-5% from the installed
shaper.
To allow checking both the software datapath and the offloaded one, make
the test suitable for inclusion from driver-specific wrapper. Introduce
such wrappers for mlxsw.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function tc_rule_stats_get() fetches a packet counter of a given TC
rule. Extend it to support byte counters as well by adding an optional
argument with selector.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function busywait() is handy as a safety-latched variant of a while
loop. Many selftests deal specifically with counter values, and busywaiting
on them is likely to be rather common (it is not quite common now, but
busywait() has not been around for very long). To facilitate expressing
simply what is tested, introduce two helpers:
- until_counter_is(), which can be used as a predicate passed to
busywait(), which holds when expression, which is itself passed as an
argument to until_counter_is(), reaches a desired value.
- busywait_for_counter(), which is useful for waiting until a given counter
changes "by" (as opposed to "to") a certain amount.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function humanize() is used for converting value in bits/s to a
human-friendly approximate value in Kbps, Mbps or Gbps. There is nothing
hardware-specific in that, so move the function to lib.sh.
Similarly for the rate() function, which just does a bit of math to
calculate a rate, given two counter values and a time interval.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix bug requesting invalid size of reallocated array when constructing CO-RE
relocation candidate list. This can cause problems if there are many potential
candidates and a very fine-grained memory allocator bucket sizes are used.
Fixes: ddc7c30426 ("libbpf: implement BPF CO-RE offset relocation algorithm")
Reported-by: William Smith <williampsmith@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200124201847.212528-1-andriin@fb.com
Previously, if libbpf failed to resolve CO-RE relocation for some
instructions, it would either return error immediately, or, if
.relaxed_core_relocs option was set, would replace relocatable offset/imm part
of an instruction with a bogus value (-1). Neither approach is good, because
there are many possible scenarios where relocation is expected to fail (e.g.,
when some field knowingly can be missing on specific kernel versions). On the
other hand, replacing offset with invalid one can hide programmer errors, if
this relocation failue wasn't anticipated.
This patch deprecates .relaxed_core_relocs option and changes the approach to
always replacing instruction, for which relocation failed, with invalid BPF
helper call instruction. For cases where this is expected, BPF program should
already ensure that that instruction is unreachable, in which case this
invalid instruction is going to be silently ignored. But if instruction wasn't
guarded, BPF program will be rejected at verification step with verifier log
pointing precisely to the place in assembly where the problem is.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200124053837.2434679-1-andriin@fb.com
Currently, there is a lot of false positives if a single reuseport test
fails. This is because expected_results and the result map are not cleared.
Zero both after individual test runs, which fixes the mentioned false
positives.
Fixes: 91134d849a ("bpf: Test BPF_PROG_TYPE_SK_REUSEPORT")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200124112754.19664-5-lmb@cloudflare.com
Include the name of the mismatching result in human readable format
when reporting an error. The new output looks like the following:
unexpected result
result: [1, 0, 0, 0, 0, 0]
expected: [0, 0, 0, 0, 0, 0]
mismatch on DROP_ERR_INNER_MAP (bpf_prog_linum:153)
check_results:FAIL:382
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200124112754.19664-4-lmb@cloudflare.com
The reuseport tests currently suffer from a race condition: FIN
packets count towards DROP_ERR_SKB_DATA, since they don't contain
a valid struct cmd. Tests will spuriously fail depending on whether
check_results is called before or after the FIN is processed.
Exit the BPF program early if FIN is set.
Fixes: 91134d849a ("bpf: Test BPF_PROG_TYPE_SK_REUSEPORT")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200124112754.19664-3-lmb@cloudflare.com
Use a proper temporary file for sendpage tests. This means that running
the tests doesn't clutter the working directory, and allows running the
test on read-only filesystems.
Fixes: 16962b2404 ("bpf: sockmap, add selftests")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200124112754.19664-2-lmb@cloudflare.com
Add mptcp_connect tool:
xmit two files back and forth between two processes, several net
namespaces including some adding delays, losses and reordering.
Wrapper script tests that data was transmitted without corruption.
The "-c" command line option for mptcp_connect.sh is there for debugging:
The script will use tcpdump to create one .pcap file per test case, named
according to the namespaces, protocols, and connect address in use.
For example, the first test case writes the capture to
ns1-ns1-MPTCP-MPTCP-10.0.1.1.pcap.
The stderr output from tcpdump is printed after the test completes to
show tcpdump's "packets dropped by kernel" information.
Also check that userspace can't create MPTCP sockets when mptcp.enabled
sysctl is off.
The "-b" option allows to tune/lower send buffer size.
"-m mmap" can be used to test blocking io. Default is non-blocking
io using read/write/poll.
Will run automatically on "make kselftest".
Note that the default timeout of 45 seconds is used even if there is a
"settings" changing it to 450. 45 seconds should be enough in most cases
but this depends on the machine running the tests.
A fix to correctly read the "settings" file has been proposed upstream
but not applied yet. It is not blocking the execution of these new tests
but it would be nice to have it:
https://patchwork.kernel.org/patch/11204935/
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Detect when bpftool source code changes and trigger rebuild within
selftests/bpf Makefile. Also fix few small formatting problems.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200124054148.2455060-1-andriin@fb.com
The 'duration' variable is referenced in the CHECK() macro, and there are
some uses of the macro before 'duration' is set. The clang compiler
(validly) complains about this.
Sample error:
.../selftests/bpf/prog_tests/fexit_test.c:23:6: warning: variable 'duration' is uninitialized when used here [-Wuninitialized]
if (CHECK(err, "prog_load sched cls", "err %d errno %d\n", err, errno))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../selftests/bpf/test_progs.h:134:25: note: expanded from macro 'CHECK'
if (CHECK(err, "prog_load sched cls", "err %d errno %d\n", err, errno))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_CHECK(condition, tag, duration, format)
^~~~~~~~
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200123235144.93610-1-sdf@google.com
The filter name is fixed to "exit_reason" for some kvm_exit events, no
matter what architect we have. Actually, the filter name ("exit_reason")
is only applicable to x86, meaning it's broken on other architects
including aarch64.
This fixes the issue by providing various kvm_exit filter names, depending
on architect we're on. Afterwards, the variable filter name is picked and
applied through ioctl(fd, SET_FILTER).
Reported-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-01-22
The following pull-request contains BPF updates for your *net-next* tree.
We've added 92 non-merge commits during the last 16 day(s) which contain
a total of 320 files changed, 7532 insertions(+), 1448 deletions(-).
The main changes are:
1) function by function verification and program extensions from Alexei.
2) massive cleanup of selftests/bpf from Toke and Andrii.
3) batched bpf map operations from Brian and Yonghong.
4) tcp congestion control in bpf from Martin.
5) bulking for non-map xdp_redirect form Toke.
6) bpf_send_signal_thread helper from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a bpf_cubic example. Some highlights:
1. CONFIG_HZ .kconfig map is used.
2. In bictcp_update(), calculation is changed to use usec
resolution (i.e. USEC_PER_JIFFY) instead of using jiffies.
Thus, usecs_to_jiffies() is not used in the bpf_cubic.c.
3. In bitctcp_update() [under tcp_friendliness], the original
"while (ca->ack_cnt > delta)" loop is changed to the equivalent
"ca->ack_cnt / delta" operation.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200122233658.903774-1-kafai@fb.com
Add program extension tests that build on top of fexit_bpf2bpf tests.
Replace three global functions in previously loaded test_pkt_access.c program
with three new implementations:
int get_skb_len(struct __sk_buff *skb);
int get_constant(long val);
int get_skb_ifindex(int val, struct __sk_buff *skb, int var);
New function return the same results as original only if arguments match.
new_get_skb_ifindex() demonstrates that 'skb' argument doesn't have to be first
and only argument of BPF program. All normal skb based accesses are available.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200121005348.2769920-4-ast@kernel.org
Add minimal support for program extensions. bpf_object_open_opts() needs to be
called with attach_prog_fd = target_prog_fd and BPF program extension needs to
have in .c file section definition like SEC("freplace/func_to_be_replaced").
libbpf will search for "func_to_be_replaced" in the target_prog_fd's BTF and
will pass it in attach_btf_id to the kernel. This approach works for tests, but
more compex use case may need to request function name (and attach_btf_id that
kernel sees) to be more dynamic. Such API will be added in future patches.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200121005348.2769920-3-ast@kernel.org
During cross-compilation, it was discovered that LDFLAGS and
LDLIBS were not being used while building binaries, leading
to defaults which were not necessarily correct.
OpenEmbedded reported this kind of problem:
ERROR: QA Issue: No GNU_HASH in the ELF binary [...], didn't pass LDFLAGS?
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Add TEST opcode to Group3-2 reg=001b as same as Group3-1 does.
Commit
12a78d43de ("x86/decoder: Add new TEST instruction pattern")
added a TEST opcode assignment to f6 XX/001/XXX (Group 3-1), but did
not add f7 XX/001/XXX (Group 3-2).
Actually, this TEST opcode variant (ModRM.reg /1) is not described in
the Intel SDM Vol2 but in AMD64 Architecture Programmer's Manual Vol.3,
Appendix A.2 Table A-6. ModRM.reg Extensions for the Primary Opcode Map.
Without this fix, Randy found a warning by insn_decoder_test related
to this issue as below.
HOSTCC arch/x86/tools/insn_decoder_test
HOSTCC arch/x86/tools/insn_sanity
TEST posttest
arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this.
arch/x86/tools/insn_decoder_test: warning: ffffffff81000bf1: f7 0b 00 01 08 00 testl $0x80100,(%rbx)
arch/x86/tools/insn_decoder_test: warning: objdump says 6 bytes, but insn_get_length() says 2
arch/x86/tools/insn_decoder_test: warning: Decoded and checked 11913894 instructions with 1 failures
TEST posttest
arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random instructions with 0 errors (seed:0x871ce29c)
To fix this error, add the TEST opcode according to AMD64 APM Vol.3.
[ bp: Massage commit message. ]
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/157966631413.9580.10311036595431878351.stgit@devnote2
Building objtool with ARCH=x86_64 fails with:
$make ARCH=x86_64 -C tools/objtool
...
CC arch/x86/decode.o
arch/x86/decode.c:10:22: fatal error: asm/insn.h: No such file or directory
#include <asm/insn.h>
^
compilation terminated.
mv: cannot stat ‘arch/x86/.decode.o.tmp’: No such file or directory
make[2]: *** [arch/x86/decode.o] Error 1
...
The root cause is that the command-line variable 'ARCH' cannot be
overridden. It can be replaced by 'SRCARCH', which is defined in
'tools/scripts/Makefile.arch'.
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/d5d11370ae116df6c653493acd300ec3d7f5e925.1579543924.git.jpoimboe@redhat.com
The sync-check.sh script prints out the path due to a "cd -" at the end
of the script, even on silent builds. This isn't even needed, since the
script is executed in our build instead of sourced (so it won't change
the working directory of the surrounding build anyway).
Just remove the cd to make the build silent.
Fixes: 2ffd84ae97 ("objtool: Update sync-check.sh from perf's check-headers.sh")
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/cb002857fafa8186cfb9c3e43fb62e4108a1bab9.1579543924.git.jpoimboe@redhat.com
There are two spelling mistakes in printf statements, fix these.
Link: http://lkml.kernel.org/r/20200116092206.52192-1-colin.king@canonical.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
To make sure no new files are introduced that doesn't include the bpf/
prefix in its #include, remove tools/lib/bpf from the include path
entirely.
Instead, we introduce a new header files directory under the scratch tools/
dir, and add a rule to run the 'install_headers' rule from libbpf to have a
full set of consistent libbpf headers in $(OUTPUT)/tools/include/bpf, and
then use $(OUTPUT)/tools/include as the include path for selftests.
For consistency we also make sure we put all the scratch build files from
other bpftool and libbpf into tools/build/, so everything stays within
selftests/.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/157952561246.1683545.2762245552022369203.stgit@toke.dk
This adds support for specifying the libbpf include and object paths as
arguments to the runqslower Makefile, to support reusing the libbpf version
built as part of the selftests.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/157952561135.1683545.5660339645093141381.stgit@toke.dk
Since we are now consistently using the bpf/ prefix on #include directives,
we don't need to include tools/lib/bpf in the include path. Remove it to
make sure we don't inadvertently introduce new includes without the prefix.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952561027.1683545.1976265477926794138.stgit@toke.dk
Fix perf to include libbpf header files with the bpf/ prefix, to
be consistent with external users of the library.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560797.1683545.7685921032671386301.stgit@toke.dk
Fix bpftool to include libbpf header files with the bpf/ prefix, to be
consistent with external users of the library. Also ensure that all
includes of exported libbpf header files (those that are exported on 'make
install' of the library) use bracketed includes instead of quoted.
To make sure no new files are introduced that doesn't include the bpf/
prefix in its include, remove tools/lib/bpf from the include path entirely,
and use tools/lib instead.
Fixes: 6910d7d386 ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560684.1683545.4765181397974997027.stgit@toke.dk
Fix all selftests to include libbpf header files with the bpf/ prefix, to
be consistent with external users of the library. Also ensure that all
includes of exported libbpf header files (those that are exported on 'make
install' of the library) use bracketed includes instead of quoted.
To not break the build, keep the old include path until everything has been
changed to the new one; a subsequent patch will remove that.
Fixes: 6910d7d386 ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560568.1683545.9649335788846513446.stgit@toke.dk
Fix the runqslower tool to include libbpf header files with the bpf/
prefix, to be consistent with external users of the library. Also ensure
that all includes of exported libbpf header files (those that are exported
on 'make install' of the library) use bracketed includes instead of quoted.
To not break the build, keep the old include path until everything has been
changed to the new one; a subsequent patch will remove that.
Fixes: 6910d7d386 ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560457.1683545.9913736511685743625.stgit@toke.dk
Add a VMLINUX_BTF variable with the locally-built path when calling the
runqslower Makefile from selftests. This makes sure a simple 'make'
invocation in the selftests dir works even when there is no BTF information
for the running kernel. Do a wildcard expansion and include the same paths
for BTF for the running kernel as in the runqslower Makefile, to make it
possible to build selftests without having a vmlinux in the local tree.
Also fix the make invocation to use $(OUTPUT)/tools as the destination
directory instead of $(CURDIR)/tools.
Fixes: 3a0d3092a4 ("selftests/bpf: Build runqslower from selftests")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560344.1683545.2723631988771664417.stgit@toke.dk
The runqslower tool refuses to build without a file to read vmlinux BTF
from. The build fails with an error message to override the location by
setting the VMLINUX_BTF variable if autodetection fails. However, the
Makefile doesn't actually work with that override - the error message is
still emitted.
Fix this by including the value of VMLINUX_BTF in the expansion, and only
emitting the error message if the *result* is empty. Also permit running
'make clean' even though no VMLINUX_BTF is set.
Fixes: 9c01546d26 ("tools/bpf: Add runqslower tool to tools/bpf")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560237.1683545.17771785178857224877.stgit@toke.dk
The same with commit 4e59afbbed ("selftests/bpf: skip nmi test when perf
hw events are disabled"), it would make more sense to skip the
test_stacktrace_build_id_nmi test if the setup (e.g. virtual machines) has
disabled hardware perf events.
Fixes: 13790d1cc7 ("bpf: add selftest for stackmap with build_id in NMI context")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200117100656.10359-1-liuhangbin@gmail.com
After commit 0d13bfce02 ("libbpf: Don't require root for
bpf_object__open()") we no longer load BTF during bpf_object__open(),
so let's remove the expectation from test_btf that the fd is not -1.
The test currently fails.
Before:
BTF libbpf test[1] (test_btf_haskv.o): do_test_file:4152:FAIL bpf_object__btf_fd: -1
BTF libbpf test[2] (test_btf_newkv.o): do_test_file:4152:FAIL bpf_object__btf_fd: -1
BTF libbpf test[3] (test_btf_nokv.o): do_test_file:4152:FAIL bpf_object__btf_fd: -1
After:
BTF libbpf test[1] (test_btf_haskv.o): OK
BTF libbpf test[2] (test_btf_newkv.o): OK
BTF libbpf test[3] (test_btf_nokv.o): OK
Fixes: 0d13bfce02 ("libbpf: Don't require root for bpf_object__open()")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200118010546.74279-1-sdf@google.com
As we added new set of mailbox commands, increment version.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In turbo-freq or base-freq auto mode, for disable, first disable the feature and
then disable clos.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The turbo-freq enable with auto mode, prints result for the last possible
CPU, which is not correct when either CPU is not present or user wants
command to be limited to a single die/package. For example, in the
below command user wants to limit to die/package 0, but the
"turbo-freq --auto" result is displayed using the other package.
$ sudo intel-speed-select -c 0 turbo-freq enable -a
Intel(R) Speed Select Technology
package-0
die-0
cpu-0
turbo-freq
enable:success
package--1
die-0
cpu-31
turbo-freq --auto
enable:success
Since we do have to traverse all CPUs, don't display CPU info for
"turbo-freq --auto", as we already displayed the result for
turbo-freq enable with the CPU information.
With the fix, the same command results in:
$ sudo intel-speed-select -c 0 turbo-freq enable -a
Intel(R) Speed Select Technology
package-0
die-0
cpu-0
turbo-freq
enable:success
turbo-freq --auto
enable:success
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
It is possible that BIOS may not enable core-power feature. In this case
this additional interface will allow to enable from this utility. Also
the information dump, includes the current status of core-power.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
perf report:
Andi Kleen:
- Clarify in help that --children is default.
Jin Yao:
- Fix no libunwind compiled warning breaking s390.
perf annotate/report/top:
Andi Kleen:
- Support --prefix/--prefix-strip, use it with objdump when doing disassembly.
perf c2c:
Andres Freund:
- Fix return type for histogram sorting comparision functions.
perf header:
Michael Petlan:
- Use last modification time for timestamp, i.e. st.st_mtime instead
of the st_ctime.
perf beauty:
Cengiz Can:
- Fix sockaddr printf format for long integers.
libperf:
Jiri Olsa:
- Setup initial evlist::all_cpus value
perf parser:
Jiri Olsa:
- Use %define api.pure full instead of %pure-parser, nuking warning
from bison about using deprecated stuff.
perf ui gtk:
- Add missing zalloc object, fixing gtk browser build.
perf clang:
Maciej S. Szmigiero:
- Fix build issues with Clang 9 and 8+.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXiBnlAAKCRCyPKLppCJ+
J8TcAQCPbf43ujtzFaWXuMWP6eYHIhZmKpMwydokpQyldhLJVwD+MWHizZayMV7z
oS+csWt7lWL3X/Jc5UPIXPYfZ4oS4wM=
=pBN7
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.6-20200116' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf report:
Andi Kleen:
- Clarify in help that --children is default.
Jin Yao:
- Fix no libunwind compiled warning breaking s390.
perf annotate/report/top:
Andi Kleen:
- Support --prefix/--prefix-strip, use it with objdump when doing disassembly.
perf c2c:
Andres Freund:
- Fix return type for histogram sorting comparision functions.
perf header:
Michael Petlan:
- Use last modification time for timestamp, i.e. st.st_mtime instead
of the st_ctime.
perf beauty:
Cengiz Can:
- Fix sockaddr printf format for long integers.
libperf:
Jiri Olsa:
- Setup initial evlist::all_cpus value
perf parser:
Jiri Olsa:
- Use %define api.pure full instead of %pure-parser, nuking warning
from bison about using deprecated stuff.
perf ui gtk:
- Add missing zalloc object, fixing gtk browser build.
perf clang:
Maciej S. Szmigiero:
- Fix build issues with Clang 9 and 8+.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from David Miller:
1) Fix non-blocking connect() in x25, from Martin Schiller.
2) Fix spurious decryption errors in kTLS, from Jakub Kicinski.
3) Netfilter use-after-free in mtype_destroy(), from Cong Wang.
4) Limit size of TSO packets properly in lan78xx driver, from Eric
Dumazet.
5) r8152 probe needs an endpoint sanity check, from Johan Hovold.
6) Prevent looping in tcp_bpf_unhash() during sockmap/tls free, from
John Fastabend.
7) hns3 needs short frames padded on transmit, from Yunsheng Lin.
8) Fix netfilter ICMP header corruption, from Eyal Birger.
9) Fix soft lockup when low on memory in hns3, from Yonglong Liu.
10) Fix NTUPLE firmware command failures in bnxt_en, from Michael Chan.
11) Fix memory leak in act_ctinfo, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
cxgb4: reject overlapped queues in TC-MQPRIO offload
cxgb4: fix Tx multi channel port rate limit
net: sched: act_ctinfo: fix memory leak
bnxt_en: Do not treat DSN (Digital Serial Number) read failure as fatal.
bnxt_en: Fix ipv6 RFS filter matching logic.
bnxt_en: Fix NTUPLE firmware command failures.
net: systemport: Fixed queue mapping in internal ring map
net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec
net: dsa: sja1105: Don't error out on disabled ports with no phy-mode
net: phy: dp83867: Set FORCE_LINK_GOOD to default after reset
net: hns: fix soft lockup when there is not enough memory
net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()
net/sched: act_ife: initalize ife->metalist earlier
netfilter: nat: fix ICMP header corruption on ICMP errors
net: wan: lapbether.c: Use built-in RCU list checking
netfilter: nf_tables: fix flowtable list del corruption
netfilter: nf_tables: fix memory leak in nf_tables_parse_netdev_hooks()
netfilter: nf_tables: remove WARN and add NLA_STRING upper limits
netfilter: nft_tunnel: ERSPAN_VERSION must not be null
netfilter: nft_tunnel: fix null-attribute check
...
Test that the trap is triggered under the right conditions and that
devlink counters increase when action is trap.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that the trap is triggered under the right conditions and that
devlink counters increase.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that the trap is triggered under the right conditions and that
devlink counters increase.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test cases to check that packets routed through disabled RIFs and
packets routed from disabled RIFs are dropped and devlink counters
increase when the action is trap.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf fixes from Ingo Molnar:
"Tooling fixes, three Intel uncore driver fixes, plus an AUX events fix
uncovered by the perf fuzzer"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Remove PCIe3 unit for SNR
perf/x86/intel/uncore: Fix missing marker for snr_uncore_imc_freerunning_events
perf/x86/intel/uncore: Add PCI ID of IMC for Xeon E3 V5 Family
perf: Correctly handle failed perf_get_aux_event()
perf hists: Fix variable name's inconsistency in hists__for_each() macro
perf map: Set kmap->kmaps backpointer for main kernel map chunks
perf report: Fix incorrectly added dimensions as switch perf data file
tools lib traceevent: Fix memory leakage in filter_event
Test all of the various openat2(2) flags. A small stress-test of a
symlink-rename attack is included to show that the protections against
".."-based attacks are sufficient.
The main things these self-tests are enforcing are:
* The struct+usize ABI for openat2(2) and copy_struct_from_user() to
ensure that upgrades will be handled gracefully (in addition,
ensuring that misaligned structures are also handled correctly).
* The -EINVAL checks for openat2(2) are all correctly handled to avoid
userspace passing unknown or conflicting flag sets (most
importantly, ensuring that invalid flag combinations are checked).
* All of the RESOLVE_* semantics (including errno values) are
correctly handled with various combinations of paths and flags.
* RESOLVE_IN_ROOT correctly protects against the symlink rename(2)
attack that has been responsible for several CVEs (and likely will
be responsible for several more).
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit ae2917093f ("tools/power/cpupower: Display boost frequency
separately") modified the library function:
struct cpufreq_available_frequencies
*cpufreq_get_available_frequencies(unsigned int cpu)
to
struct cpufreq_frequencies
*cpufreq_get_frequencies(const char *type, unsigned int cpu)
This patch recovers the old API and implements the new functionality
in a newly introduce method:
struct cpufreq_boost_frequencies
*cpufreq_get_available_frequencies(unsigned int cpu)
This one should get merged into stable kernels back to 5.0 when
the above had been introduced.
Fixes: ae2917093f ("tools/power/cpupower: Display boost frequency separately")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
As more programs (TRACING, STRUCT_OPS, and upcoming LSM) use vmlinux
BTF information, loading the BTF vmlinux information for every program
in an object is sub-optimal. The fix was originally proposed in:
https://lore.kernel.org/bpf/CAEf4BzZodr3LKJuM7QwD38BiEH02Cc1UbtnGpVkCJ00Mf+V_Qg@mail.gmail.com/
The btf_vmlinux is populated in the object if any of the programs in
the object requires it just before the programs are loaded and freed
after the programs finish loading.
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Brendan Jackman <jackmanb@chromium.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200117212825.11755-1-kpsingh@chromium.org
iocost_monitor.py broke with recent versions of drgn due to helper
being stricter about types. Fix it so that it uses the correct type.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Omar Sandoval <osandov@fb.com>
Prevent potential overflow performed in 32-bit integers, before assigning
result to size_t. Reported by LGTM static analysis.
Fixes: eba9c5f498 ("libbpf: Refactor global data map initialization")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200117060801.1311525-4-andriin@fb.com
Current implementation of bpf_object's BTF initialization is very convoluted
and thus prone to errors. It doesn't have to be like that. This patch
simplifies it significantly.
This code also triggered static analysis issues over logically dead code due
to redundant error checks. This simplification should fix that as well.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200117060801.1311525-3-andriin@fb.com
Revert bpf_helpers.h's change to include auto-generated bpf_helper_defs.h
through <> instead of "", which causes it to be searched in include path. This
can break existing applications that don't have their include path pointing
directly to where libbpf installs its headers.
There is ongoing work to make all (not just bpf_helper_defs.h) includes more
consistent across libbpf and its consumers, but this unbreaks user code as is
right now without any regressions. Selftests still behave sub-optimally
(taking bpf_helper_defs.h from libbpf's source directory, if it's present
there), which will be fixed in subsequent patches.
Fixes: 6910d7d386 ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir")
Reported-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200117004103.148068-1-andriin@fb.com
Alexei observed that test_progs send_signal may fail if run
with command line "./test_progs" and the tests will pass
if just run "./test_progs -n 40".
I observed similar issue with nmi subtest failure
and added a delay 100 us in Commit ab8b7f0cb3
("tools/bpf: Add self tests for bpf_send_signal_thread()")
and the problem is gone for me. But the issue still exists
in Alexei's testing environment.
The current code uses sample_freq = 50 (50 events/second), which
may not be enough. But if the sample_freq value is larger than
sysctl kernel/perf_event_max_sample_rate, the perf_event_open
syscall will fail.
This patch changed nmi perf testing to use sample_period = 1,
which means trying to sampling every event. This seems fixing
the issue.
Fixes: ab8b7f0cb3 ("tools/bpf: Add self tests for bpf_send_signal_thread()")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200116174004.1522812-1-yhs@fb.com
It was observed[1] on arm64 that __builtin_strlen led to an infinite
loop in the get_size selftest. This is because __builtin_strlen (and
other builtins) may sometimes result in a call to the C library
function. The C library implementation of strlen uses an IFUNC
resolver to load the most efficient strlen implementation for the
underlying machine and hence has a PLT indirection even for static
binaries. Because this binary avoids the C library startup routines,
the PLT initialization never happens and hence the program gets stuck
in an infinite loop.
On x86_64 the __builtin_strlen just happens to expand inline and avoid
the call but that is not always guaranteed.
Further, while testing on x86_64 (Fedora 31), it was observed that the
test also failed with a segfault inside write() because the generated
code for the write function in glibc seems to access TLS before the
syscall (probably due to the cancellation point check) and fails
because TLS is not initialised.
To mitigate these problems, this patch reduces the interface with the
C library to just the syscall function. The syscall function still
sets errno on failure, which is undesirable but for now it only
affects cases where syscalls fail.
[1] https://bugs.linaro.org/show_bug.cgi?id=5479
Signed-off-by: Siddhesh Poyarekar <siddhesh@gotplt.org>
Reported-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Tested-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Reviewed-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 35c9e74cff ("selftests/livepatch: Make dynamic debug setup and
restore generic") introduced setup_config() to set up the environment
for each test. It superseded set_dynamic_debug(). README still mentions
set_dynamic_debug(), so update it to setup_config() which should be used
now in every test.
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
bpf_attr doesn't required to be declared with '= {}' as memset is used
in the code.
Fixes: 2ab3d86ea1 ("libbpf: Add libbpf support to batch ops")
Reported-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200116045918.75597-1-brianvv@google.com
Daniel Borkmann says:
====================
pull-request: bpf 2020-01-15
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 9 day(s) which contain
a total of 13 files changed, 95 insertions(+), 43 deletions(-).
The main changes are:
1) Fix refcount leak for TCP time wait and request sockets for socket lookup
related BPF helpers, from Lorenz Bauer.
2) Fix wrong verification of ARSH instruction under ALU32, from Daniel Borkmann.
3) Batch of several sockmap and related TLS fixes found while operating
more complex BPF programs with Cilium and OpenSSL, from John Fastabend.
4) Fix sockmap to read psock's ingress_msg queue before regular sk_receive_queue()
to avoid purging data upon teardown, from Lingpeng Chen.
5) Fix printing incorrect pointer in bpftool's btf_dump_ptr() in order to properly
dump a BPF map's value with BTF, from Martin KaFai Lau.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ability to specify a list of test name substrings for selecting which
tests to run. So now -t is accepting a comma-separated list of strings,
similarly to how -n accepts a comma-separated list of test numbers.
Additionally, add ability to blacklist tests by name. Blacklist takes
precedence over whitelist. Blacklisting is important for cases where it's
known that some tests can't pass (e.g., due to perf hardware events that are
not available within VM). This is going to be used for libbpf testing in
Travis CI in its Github repo.
Example runs with just whitelist and whitelist + blacklist:
$ sudo ./test_progs -tattach,core/existence
#1 attach_probe:OK
#6 cgroup_attach_autodetach:OK
#7 cgroup_attach_multi:OK
#8 cgroup_attach_override:OK
#9 core_extern:OK
#10/44 existence:OK
#10/45 existence___minimal:OK
#10/46 existence__err_int_sz:OK
#10/47 existence__err_int_type:OK
#10/48 existence__err_int_kind:OK
#10/49 existence__err_arr_kind:OK
#10/50 existence__err_arr_value_type:OK
#10/51 existence__err_struct_type:OK
#10 core_reloc:OK
#19 flow_dissector_reattach:OK
#60 tp_attach_query:OK
Summary: 8/8 PASSED, 0 SKIPPED, 0 FAILED
$ sudo ./test_progs -tattach,core/existence -bcgroup,flow/arr
#1 attach_probe:OK
#9 core_extern:OK
#10/44 existence:OK
#10/45 existence___minimal:OK
#10/46 existence__err_int_sz:OK
#10/47 existence__err_int_type:OK
#10/48 existence__err_int_kind:OK
#10/51 existence__err_struct_type:OK
#10 core_reloc:OK
#60 tp_attach_query:OK
Summary: 4/6 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Julia Kartseva <hex@fb.com>
Link: https://lore.kernel.org/bpf/20200116005549.3644118-1-andriin@fb.com
This patch makes bpftool support dumping a map's value properly
when the map's value type is a type of the running kernel's btf.
(i.e. map_info.btf_vmlinux_value_type_id is set instead of
map_info.btf_value_type_id). The first usecase is for the
BPF_MAP_TYPE_STRUCT_OPS.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200115230044.1103008-1-kafai@fb.com
This patch adds BPF_MAP_TYPE_STRUCT_OPS to "struct_ops" name mapping
so that "bpftool map show" can print the "struct_ops" map type
properly.
[root@arch-fb-vm1 bpf]# ~/devshare/fb-kernel/linux/tools/bpf/bpftool/bpftool map show id 8
8: struct_ops name dctcp flags 0x0
key 4B value 256B max_entries 1 memlock 4096B
btf_id 7
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200115230037.1102674-1-kafai@fb.com
This patch exposes bpf_find_kernel_btf() as a LIBBPF_API.
It will be used in 'bpftool map dump' in a following patch
to dump a map with btf_vmlinux_value_type_id set.
bpf_find_kernel_btf() is renamed to libbpf_find_kernel_btf()
and moved to btf.c. As <linux/kernel.h> is included,
some of the max/min type casting needs to be fixed.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200115230031.1102305-1-kafai@fb.com
The btf availability check is only done for plain text output.
It causes the whole BTF output went missing when json_output
is used.
This patch simplifies the logic a little by avoiding passing "int btf" to
map_dump().
For plain text output, the btf_wtr is only created when the map has
BTF (i.e. info->btf_id != 0). The nullness of "json_writer_t *wtr"
in map_dump() alone can decide if dumping BTF output is needed.
As long as wtr is not NULL, map_dump() will print out the BTF-described
data whenever a map has BTF available (i.e. info->btf_id != 0)
regardless of json or plain-text output.
In do_dump(), the "int btf" is also renamed to "int do_plain_btf".
Fixes: 99f9863a0c ("bpftool: Match maps by name")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: Paul Chaignon <paul.chaignon@orange.com>
Link: https://lore.kernel.org/bpf/20200115230025.1101828-1-kafai@fb.com
When testing a map has btf or not, maps_have_btf() tests it by actually
getting a btf_fd from sys_bpf(BPF_BTF_GET_FD_BY_ID). However, it
forgot to btf__free() it.
In maps_have_btf() stage, there is no need to test it by really
calling sys_bpf(BPF_BTF_GET_FD_BY_ID). Testing non zero
info.btf_id is good enough.
Also, the err_close case is unnecessary, and also causes double
close() because the calling func do_dump() will close() all fds again.
Fixes: 99f9863a0c ("bpftool: Match maps by name")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: Paul Chaignon <paul.chaignon@orange.com>
Link: https://lore.kernel.org/bpf/20200115230019.1101352-1-kafai@fb.com
Added four libbpf API functions to support map batch operations:
. int bpf_map_delete_batch( ... )
. int bpf_map_lookup_batch( ... )
. int bpf_map_lookup_and_delete_batch( ... )
. int bpf_map_update_batch( ... )
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115184308.162644-8-brianvv@google.com
Add a test that will attach a FENTRY and FEXIT program to the XDP test
program. It will also verify data from the XDP context on FENTRY and
verifies the return code on exit.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157909410480.47481.11202505690938004673.stgit@xdp-tutorial
The LLVM patch https://reviews.llvm.org/D72197 makes LLVM emit function call
relocations within the same section. This includes a default .text section,
which contains any BPF sub-programs. This wasn't the case before and so libbpf
was able to get a way with slightly simpler handling of subprogram call
relocations.
This patch adds support for .text section relocations. It needs to ensure
correct order of relocations, so does two passes:
- first, relocate .text instructions, if there are any relocations in it;
- then process all the other programs and copy over patched .text instructions
for all sub-program calls.
v1->v2:
- break early once .text program is processed.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115190856.2391325-1-andriin@fb.com
The test_progs send_signal() is amended to test
bpf_send_signal_thread() as well.
$ ./test_progs -n 40
#40/1 send_signal_tracepoint:OK
#40/2 send_signal_perf:OK
#40/3 send_signal_nmi:OK
#40/4 send_signal_tracepoint_thread:OK
#40/5 send_signal_perf_thread:OK
#40/6 send_signal_nmi_thread:OK
#40 send_signal:OK
Summary: 1/6 PASSED, 0 SKIPPED, 0 FAILED
Also took this opportunity to rewrite the send_signal test
using skeleton framework and array mmap to make code
simpler and more readable.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115035003.602425-1-yhs@fb.com
Commit 8b401f9ed2 ("bpf: implement bpf_send_signal() helper")
added helper bpf_send_signal() which permits bpf program to
send a signal to the current process. The signal may be
delivered to any threads in the process.
We found a use case where sending the signal to the current
thread is more preferable.
- A bpf program will collect the stack trace and then
send signal to the user application.
- The user application will add some thread specific
information to the just collected stack trace for
later analysis.
If bpf_send_signal() is used, user application will need
to check whether the thread receiving the signal matches
the thread collecting the stack by checking thread id.
If not, it will need to send signal to another thread
through pthread_kill().
This patch proposed a new helper bpf_send_signal_thread(),
which sends the signal to the thread corresponding to
the current kernel task. This way, user space is guaranteed that
bpf_program execution context and user space signal handling
context are the same thread.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200115035002.602336-1-yhs@fb.com
Using .st_ctime clobbers the timestamp information in perf report header
whenever any operation is done with the file. Even tar-ing and untar-ing
the perf.data file (which preserves the file last modification timestamp)
doesn't prevent that:
[Michael@Diego tmp]$ ls -l perf.data
-> -rw-------. 1 Michael Michael 169888 Dec 2 15:23 perf.data
[Michael@Diego tmp]$ perf report --header-only
# ========
-> # captured on : Mon Dec 2 15:23:42 2019
[...]
[Michael@Diego tmp]$ tar c perf.data | xz > perf.data.tar.xz
[Michael@Diego tmp]$ mkdir aaa
[Michael@Diego tmp]$ cd aaa
[Michael@Diego aaa]$ xzcat ../perf.data.tar.xz | tar x
[Michael@Diego aaa]$ ls -l -a
total 172
drwxrwxr-x. 2 Michael Michael 23 Jan 14 11:26 .
drwxrwxr-x. 6 Michael Michael 4096 Jan 14 11:26 ..
-> -rw-------. 1 Michael Michael 169888 Dec 2 15:23 perf.data
[Michael@Diego aaa]$ perf report --header-only
# ========
-> # captured on : Tue Jan 14 11:26:16 2020
[...]
When using .st_mtime instead, correct information is printed:
[Michael@Diego aaa]$ ~/acme/tools/perf/perf report --header-only
# ========
-> # captured on : Mon Dec 2 15:23:42 2019
[...]
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20200114104236.31555-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Mausezahn does not recognize "own" as a keyword on source IP address. As a
result, the MC stream is not running at all, and therefore no UC
degradation can be observed even in principle.
Fix the invocation, and tighten the test: due to the minimum shaper
configured at the MC TCs, we always expect about 20% degradation. Fail the
test if it is lower.
Fixes: 573363a68f ("selftests: mlxsw: Add qos_lib.sh")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reported-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test reuses the common FIB offload tests in order to make sure that
mlxsw correctly implements FIB offload.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test various aspects of the FIB offload API on top of the netdevsim
implementation. Both good and bad flows are tested.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement a set of common helpers and tests for FIB offload that can be
used by multiple drivers to check their FIB offload implementations.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces the macsec_context structure. It will be used
in the kernel to exchange information between the common MACsec
implementation (macsec.c) and the MACsec hardware offloading
implementations. This structure contains pointers to MACsec specific
structures which contain the actual MACsec configuration, and to the
underlying device (phydev for now).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sockaddr related examples given in
`tools/perf/examples/bpf/augmented_syscalls.c` almost always use `long`s
to represent most of their fields.
However, `size_t syscall_arg__scnprintf_sockaddr(..)` has a `scnprintf`
call that uses `"%#x"` as format string.
This throws a warning (whenever the syscall argument is `unsigned
long`).
Added `l` identifier to indicate that the `arg->value` is an unsigned
long.
Not sure about the complications of this with x86 though.
Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200113174438.102975-1-cengiz@kernel.wtf
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ravi Bangoria reported an issue when doing the gtk2 feature detection on
Fedora 31, where some types got deprecated:
/usr/include/gtk-2.0/gtk/gtktypeutils.h:236:1: error: ‘GTypeDebugFlags’ is deprecated [-Werror=deprecated-declarations]
236 | void gtk_type_init (GTypeDebugFlags debug_flags);
Fix this for perf by allowing the compile to pass with deprecated
symbols via the -Wno-deprecated-declarations compiler directive.
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jelle van der Waa <jelle@vdwaa.nl>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200113104358.123511-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we moved zalloc.o to the library we missed gtk library which needs
it compiled in, otherwise the missing __zfree symbol will cause the
library to fail to load.
Adding the zalloc object to the gtk library build.
Fixes: 7f7c536f23 ("tools lib: Adopt zalloc()/zfree() from tools/perf")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jelle van der Waa <jelle@vdwaa.nl>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200113104358.123511-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bison deprecated the "%pure-parser" directive in favor of "%define
api.pure full".
The api.pure got introduced in bison 2.3 (Oct 2007), so it seems safe to
use it without any version check.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200112192259.GA35080@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jann Horn reported crash in perf ftrace because evlist::all_cpus isn't
initialized if there's evlist without events, which is the case for perf
ftrace.
Adding initial initialization of evlist::all_cpus from given cpus,
regardless of events in the evlist.
Fixes: 7736627b86 ("perf stat: Use affinity for closing file descriptors")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200110151537.153012-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 800d3f5616 ("perf report: Add warning when libunwind not
compiled in") breaks the s390 platform. S390 uses libdw-dwarf-unwind for
call chain unwinding and had no support for libunwind.
So the warning "Please install libunwind development packages during the
perf build." caused the confusion even if the call-graph is displayed
correctly.
This patch adds checking for HAVE_DWARF_SUPPORT, which is set when
libdw-dwarf-unwind is compiled in.
Fixes: 800d3f5616 ("perf report: Add warning when libunwind not compiled in")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200107191745.18415-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The objdump utility has useful --prefix / --prefix-strip options to
allow changing source code file names hardcoded into executables' debug
info. Add options to 'perf report', 'perf top' and 'perf annotate',
which are then passed to objdump.
$ mkdir foo
$ echo 'main() { for (;;); }' > foo/foo.c
$ gcc -g foo/foo.c
foo/foo.c:1:1: warning: return type defaults to ‘int’ [-Wimplicit-int]
1 | main() { for (;;); }
| ^~~~
$ perf record ./a.out
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.230 MB perf.data (5721 samples) ]
$ mv foo bar
$ perf annotate
<does not show source code>
$ perf annotate --prefix=/home/ak/lsrc/git/bar --prefix-strip=5
<does show source code>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 20200107210444.214071-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refer to --no-children, which is what most people probably want.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
LPU-Reference: 20200103183643.149150-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LLVM rL344140 (included in Clang 8+) moved VFS from Clang to LLVM, so
paths to its include files have changed.
This broke the Clang test in tools/build - let's fix it.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Denis Pronin <dannftk@yandex.ru>
Cc: Dennis Schridde <devurandom@gmx.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20191228171314.946469-1-mail@maciej.szmigiero.name
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LLVM D59377 (included in Clang 9) refactored Clang VFS construction a
bit, which broke perf clang build. Let's fix it.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Reviewed-by: Dennis Schridde <devurandom@gmx.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: clang-built-linux@googlegroups.com
Cc: Denis Pronin <dannftk@yandex.ru>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191228171314.946469-2-mail@maciej.szmigiero.name
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Output on success:
1..1
ok 1 exec
# Pass 1 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
Output on failure:
1..1
not ok 1 36016 16
Bail out!
Output with lack of permissions:
1..1
not ok 1 # SKIP need to run as root
Output without support of time namespaces:
1..1
not ok 1 # SKIP Time namespaces are not supported
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-35-dima@arista.com
Output on success:
1..4
ok 1 host: clock: monotonic cycles: 148323947
ok 2 host: clock: boottime cycles: 148577503
ok 3 ns: clock: monotonic cycles: 137659217
ok 4 ns: clock: boottime cycles: 137959154
# Pass 4 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
Output with lack of permissions:
1..4
ok 1 host: clock: monotonic cycles: 145671139
ok 2 host: clock: boottime cycles: 146958357
not ok 3 # SKIP need to run as root
Output without support of time namespaces:
1..4
ok 1 host: clock: monotonic cycles: 145671139
ok 2 host: clock: boottime cycles: 146958357
not ok 3 # SKIP Time namespaces are not supported
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-34-dima@arista.com
Check that timer_create() takes into account clock offsets.
Output on success:
1..3
ok 1 clockid=7
ok 2 clockid=1
ok 3 clockid=9
# Pass 3 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
Output with lack of permissions:
1..3
not ok 1 # SKIP need to run as root
Output without support of time namespaces:
1..3
not ok 1 # SKIP Time namespaces are not supported
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-33-dima@arista.com
Check that /proc/uptime is correct inside a new time namespace.
Output on success:
1..1
ok 1 Passed for /proc/uptime
# Pass 1 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
Output with lack of permissions:
1..1
not ok 1 # SKIP need to run as root
Output without support of time namespaces:
1..1
not ok 1 # SKIP Time namespaces are not supported
Co-developed-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-32-dima@arista.com
Check that clock_nanosleep() takes into account clock offsets.
Output on success:
1..4
ok 1 clockid: 1 abs:0
ok 2 clockid: 1 abs:1
ok 3 clockid: 9 abs:0
ok 4 clockid: 9 abs:1
Output with lack of permissions:
1..4
not ok 1 # SKIP need to run as root
Output without support of time namespaces:
1..4
not ok 1 # SKIP Time namespaces are not supported
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-31-dima@arista.com
Check that timerfd_create() takes into account clock offsets.
Output on success:
1..3
ok 1 clockid=7
ok 2 clockid=1
ok 3 clockid=9
# Pass 3 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
Output on failure:
1..3
not ok 1 clockid: 7 elapsed: 0
not ok 2 clockid: 1 elapsed: 0
not ok 3 clockid: 9 elapsed: 0
Bail out!
Output with lack of permissions:
1..3
not ok 1 # SKIP need to run as root
Output without support of time namespaces:
1..3
not ok 1 # SKIP Time namespaces are not supported
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-30-dima@arista.com
A test to check that all supported clocks work on host and inside
a new time namespace. Use both ways to get time: through VDSO and
by entering the kernel with implicit syscall.
Introduce a new timens directory in selftests framework for
the next timens tests.
Output on success:
1..10
ok 1 Passed for CLOCK_BOOTTIME (syscall)
ok 2 Passed for CLOCK_BOOTTIME (vdso)
ok 3 Passed for CLOCK_BOOTTIME_ALARM (syscall)
ok 4 Passed for CLOCK_BOOTTIME_ALARM (vdso)
ok 5 Passed for CLOCK_MONOTONIC (syscall)
ok 6 Passed for CLOCK_MONOTONIC (vdso)
ok 7 Passed for CLOCK_MONOTONIC_COARSE (syscall)
ok 8 Passed for CLOCK_MONOTONIC_COARSE (vdso)
ok 9 Passed for CLOCK_MONOTONIC_RAW (syscall)
ok 10 Passed for CLOCK_MONOTONIC_RAW (vdso)
# Pass 10 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
Output with lack of permissions:
1..10
not ok 1 # SKIP need to run as root
Output without support of time namespaces:
1..10
not ok 1 # SKIP Time namespaces are not supported
Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-29-dima@arista.com
clock_nanosleep() accepts absolute values of expiration time when
TIMER_ABSTIME flag is set. This absolute value is inside the task's
time namespace, and has to be converted to the host's time.
There is timens_ktime_to_host() helper for converting time, but
it accepts ktime argument.
As a preparation, make hrtimer_nanosleep() accept a clock value in ktime
instead of timespec64.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-17-dima@arista.com
Convert one of BCC tools (runqslower [0]) to BPF CO-RE + libbpf. It matches
its BCC-based counterpart 1-to-1, supporting all the same parameters and
functionality.
runqslower tool utilizes BPF skeleton, auto-generated from BPF object file,
as well as memory-mapped interface to global (read-only, in this case) data.
Its Makefile also ensures auto-generation of "relocatable" vmlinux.h, which is
necessary for BTF-typed raw tracepoints with direct memory access.
[0] 11bf5d02c8/tools/runqslower.py
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200113073143.1779940-6-andriin@fb.com
This patch makes structs and unions, emitted through BTF dump, automatically
CO-RE-relocatable (unless disabled with `#define BPF_NO_PRESERVE_ACCESS_INDEX`,
specified before including generated header file).
This effectivaly turns usual bpf_probe_read() call into equivalent of
bpf_core_read(), by automatically applying builtin_preserve_access_index to
any field accesses of types in generated C types header.
This is especially useful for tp_btf/fentry/fexit BPF program types. They
allow direct memory access, so BPF C code just uses straightfoward a->b->c
access pattern to read data from kernel. But without kernel structs marked as
CO-RE relocatable through preserve_access_index attribute, one has to enclose
all the data reads into a special __builtin_preserve_access_index code block,
like so:
__builtin_preserve_access_index(({
x = p->pid; /* where p is struct task_struct *, for example */
}));
This is very inconvenient and obscures the logic quite a bit. By marking all
auto-generated types with preserve_access_index attribute the above code is
reduced to just a clean and natural `x = p->pid;`.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200113073143.1779940-5-andriin@fb.com
Bring selftest/bpf's Makefile output to the same format used by libbpf and
bpftool: 2 spaces of padding on the left + 8-character left-aligned build step
identifier.
Also, hide feature detection output by default. Can be enabled back by setting
V=1.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200113073143.1779940-4-andriin@fb.com
bpf_helpers_doc.py script, used to generate bpf_helper_defs.h, unconditionally
emits one informational message to stderr. Remove it and preserve stderr to
contain only relevant errors. Also make sure script invocations command is
muted by default in libbpf's Makefile.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200113073143.1779940-3-andriin@fb.com
The following tests:
* Fetch FD, and then compare via kcmp
* Make sure getfd can be blocked by blocking ptrace_may_access
* Making sure fetching bad FDs fails
* Make sure trying to set flags to non-zero results in an EINVAL
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200107175927.4558-5-sargun@sargun.me
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Add "bootconfig" command which operates the bootconfig
config-data on initrd image.
User can add/delete/verify the boot config on initrd
image using this command.
e.g.
Add a boot config to initrd image
# bootconfig -a myboot.conf /boot/initrd.img
Remove it.
# bootconfig -d /boot/initrd.img
Or verify (and show) it.
# bootconfig /boot/initrd.img
Link: http://lkml.kernel.org/r/157867223582.17873.14342161849213219982.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ Removed extra blank line at end of bootconfig.c ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Sync msr-index.h to pull in recent renames of the IA32_FEATURE_CONTROL
MSR definitions. Update KVM's VMX selftest and turbostat accordingly.
Keep the full name in turbostat's output to avoid breaking someone's
workflow, e.g. if a script is looking for the full name.
While using the renamed defines is by no means necessary, do the sync
now to avoid leaving a landmine that will get stepped on the next time
msr-index.h needs to be refreshed for some other reason.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-4-sean.j.christopherson@intel.com
The kernel's version of msr-index.h was pulled wholesale into tools by
commit
444e2ff34d ("tools arch x86: Grab a copy of the file containing the MSR numbers"),
Use the common msr-index.h instead of manually redefining everything in
a KVM-only header.
Note, a few MSR-related definitions remain in processor.h because they
are not covered by msr-index.h, including the awesomely named
APIC_BASE_MSR, which refers to starting index of the x2APIC MSRs, not
the actual MSR_IA32_APICBASE, which *is* defined by msr-index.h.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-3-sean.j.christopherson@intel.com
ACPICA commit 8b9c69d0984067051ffbe8526f871448ead6a26b
Link: https://github.com/acpica/acpica/commit/8b9c69d0
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For plain text output, it incorrectly prints the pointer value
"void *data". The "void *data" is actually pointing to memory that
contains a bpf-map's value. The intention is to print the content of
the bpf-map's value instead of printing the pointer pointing to the
bpf-map's value.
In this case, a member of the bpf-map's value is a pointer type.
Thus, it should print the "*(void **)data".
Fixes: 22c349e8db ("tools: bpftool: fix format strings and arguments for jsonw_printf()")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Link: https://lore.kernel.org/bpf/20200110231644.3484151-1-kafai@fb.com
Streamline BPF_TRACE_x macro by moving out return type and section attribute
definition out of macro itself. That makes those function look in source code
similar to other BPF programs. Additionally, simplify its usage by determining
number of arguments automatically (so just single BPF_TRACE vs a family of
BPF_TRACE_1, BPF_TRACE_2, etc). Also, allow more natural function argument
syntax without commas inbetween argument type and name.
Given this helper is useful not only for tracing tp_btf/fenty/fexit programs,
but could be used for LSM programs and others following the same pattern,
rename BPF_TRACE macro into more generic BPF_PROG. Existing BPF_TRACE_x
usages in selftests are converted to new BPF_PROG macro.
Following the same pattern, define BPF_KPROBE and BPF_KRETPROBE macros for
nicer usage of kprobe/kretprobe arguments, respectively. BPF_KRETPROBE, adopts
same convention used by fexit programs, that last defined argument is probed
function's return result.
v4->v5:
- fix test_overhead test (__set_task_comm is void) (Alexei);
v3->v4:
- rebased and fixed one more BPF_TRACE_x occurence (Alexei);
v2->v3:
- rename to shorter and as generic BPF_PROG (Alexei);
v1->v2:
- verified GCC handles pragmas as expected;
- added descriptions to macros;
- converted new STRUCT_OPS selftest to BPF_HANDLER (worked as expected);
- added original context as 'ctx' parameter, for cases where it has to be
passed into BPF helpers. This might cause an accidental naming collision,
unfortunately, but at least it's easy to work around. Fortunately, this
situation produces quite legible compilation error:
progs/bpf_dctcp.c:46:6: error: redefinition of 'ctx' with a different type: 'int' vs 'unsigned long long *'
int ctx = 123;
^
progs/bpf_dctcp.c:42:6: note: previous definition is here
void BPF_HANDLER(dctcp_init, struct sock *sk)
^
./bpf_trace_helpers.h:58:32: note: expanded from macro 'BPF_HANDLER'
____##name(unsigned long long *ctx, ##args)
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200110211634.1614739-1-andriin@fb.com
This adds a basic framework for running all the "safe" LKDTM tests. This
will allow easy introspection into any selftest logs to examine the
results of most LKDTM tests.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It's been a recurring issue with types like u32 slipping into libbpf source
code accidentally. This is not detected during builds inside kernel source
tree, but becomes a compilation error in libbpf's Github repo. Libbpf is
supposed to use only __{s,u}{8,16,32,64} typedefs, so poison {s,u}{8,16,32,64}
explicitly in every .c file. Doing that in a bit more centralized way, e.g.,
inside libbpf_internal.h breaks selftests, which are both using kernel u32 and
libbpf_internal.h.
This patch also fixes a new u32 occurence in libbpf.c, added recently.
Fixes: 590a008882 ("bpf: libbpf: Add STRUCT_OPS support")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200110181916.271446-1-andriin@fb.com
test_global_func[12] - check 512 stack limit.
test_global_func[34] - check 8 frame call chain limit.
test_global_func5 - check that non-ctx pointer cannot be passed into
a function that expects context.
test_global_func6 - check that ctx pointer is unmodified.
test_global_func7 - check that global function returns scalar.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200110064124.1760511-7-ast@kernel.org
Make two static functions in test_xdp_noinline.c global:
before: processed 2790 insns
after: processed 2598 insns
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200110064124.1760511-6-ast@kernel.org
test results:
pyperf50 with always_inlined the same function five times: processed 46378 insns
pyperf50 with global function: processed 6102 insns
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200110064124.1760511-5-ast@kernel.org
Add simple fexit prog type to skb prog type test when subprogram is a global
function.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200110064124.1760511-4-ast@kernel.org
In case the kernel doesn't support BTF_FUNC_GLOBAL sanitize BTF produced by the
compiler for global functions.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200110064124.1760511-2-ast@kernel.org
Further clean up Makefile output:
- hide "entering directory" messages;
- silvence sub-Make command echoing;
- succinct MKDIR messages.
Also remove few test binaries that are not produced anymore from .gitignore.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200110051716.1591485-4-andriin@fb.com
Reorder includes search path to ensure $(OUTPUT) and $(CURDIR) go before
libbpf's directory. Also fix bpf_helpers.h to include bpf_helper_defs.h in
such a way as to leverage includes search path. This allows selftests to not
use libbpf's local and potentially stale bpf_helper_defs.h. It's important
because selftests/bpf's Makefile only re-generates bpf_helper_defs.h in
seltests' output directory, not the one in libbpf's directory.
Also force regeneration of bpf_helper_defs.h when libbpf.a is updated to
reduce staleness.
Fixes: fa633a0f89 ("libbpf: Fix build on read-only filesystems")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200110051716.1591485-3-andriin@fb.com
Libbpf's clean target should clean out generated files in $(OUTPUT) directory
and not make assumption that $(OUTPUT) directory is current working directory.
Selftest's Makefile should delegate cleaning of libbpf-generated files to
libbpf's Makefile. This ensures more robust clean up.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200110051716.1591485-2-andriin@fb.com
Currently, libbpf re-sorts bpf_map structs after all the maps are added and
initialized, which might change their relative order and invalidate any
bpf_map pointer or index taken before that. This is inconvenient and
error-prone. For instance, it can cause .kconfig map index to point to a wrong
map.
Furthermore, libbpf itself doesn't rely on any specific ordering of bpf_maps,
so it's just an unnecessary complication right now. This patch drops sorting
of maps and makes their relative positions fixed. If efficient index is ever
needed, it's better to have a separate array of pointers as a search index,
instead of reordering bpf_map struct in-place. This will be less error-prone
and will allow multiple independent orderings, if necessary (e.g., either by
section index or by name).
Fixes: 166750bc1d ("libbpf: Support libbpf-provided extern variables")
Reported-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200110034247.1220142-1-andriin@fb.com
To open a MPTCP socket with socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP),
IPPROTO_MPTCP needs a value that differs from IPPROTO_TCP. The existing
IPPROTO numbers mostly map directly to IANA-specified protocol numbers.
MPTCP does not have a protocol number allocated because MPTCP packets
use the TCP protocol number. Use private number not used OTA.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "c_threads" variable is used in the error handling code before it
has been initialized
Fixes: 11318989c3 ("selftests: cgroup: Add task migration tests")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The ungrafting from PRIO bug fixes in net, when merged into net-next,
merge cleanly but create a build failure. The resolution used here is
from Petr Machata.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Missing netns pointer init in arp_tables, from Florian Westphal.
2) Fix normal tcp SACK being treated as D-SACK, from Pengcheng Yang.
3) Fix divide by zero in sch_cake, from Wen Yang.
4) Len passed to skb_put_padto() is wrong in qrtr code, from Carl
Huang.
5) cmd->obj.chunk is leaked in sctp code error paths, from Xin Long.
6) cgroup bpf programs can be released out of order, fix from Roman
Gushchin.
7) Make sure stmmac debugfs entry name is changed when device name
changes, from Jiping Ma.
8) Fix memory leak in vlan_dev_set_egress_priority(), from Eric
Dumazet.
9) SKB leak in lan78xx usb driver, also from Eric Dumazet.
10) Ridiculous TCA_FQ_QUANTUM values configured can cause loops in fq
packet scheduler, reject them. From Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
tipc: fix wrong connect() return code
tipc: fix link overflow issue at socket shutdown
netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present
netfilter: conntrack: dccp, sctp: handle null timeout argument
atm: eni: fix uninitialized variable warning
macvlan: do not assume mac_header is set in macvlan_broadcast()
net: sch_prio: When ungrafting, replace with FIFO
mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO
MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos
gtp: fix bad unlock balance in gtp_encap_enable_socket
pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM
tipc: remove meaningless assignment in Makefile
tipc: do not add socket.o to tipc-y twice
net: stmmac: dwmac-sun8i: Allow all RGMII modes
net: stmmac: dwmac-sunxi: Allow all RGMII modes
net: usb: lan78xx: fix possible skb leak
net: stmmac: Fixed link does not need MDIO Bus
vlan: vlan_changelink() should propagate errors
vlan: fix memory leak in vlan_dev_set_egress_priority
stmmac: debugfs entry name is not be changed when udev rename device name.
...
Document BPF_F_QUERY_EFFECTIVE flag, mostly to clarify how it affects
attach_flags what may not be obvious and what may lead to confision.
Specifically attach_flags is returned only for target_fd but if programs
are inherited from an ancestor cgroup then returned attach_flags for
current cgroup may be confusing. For example, two effective programs of
same attach_type can be returned but w/o BPF_F_ALLOW_MULTI in
attach_flags.
Simple repro:
# bpftool c s /sys/fs/cgroup/path/to/task
ID AttachType AttachFlags Name
# bpftool c s /sys/fs/cgroup/path/to/task effective
ID AttachType AttachFlags Name
95043 ingress tw_ipt_ingress
95048 ingress tw_ingress
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200108014006.938363-1-rdna@fb.com
This patch adds a bpf_dctcp example. It currently does not do
no-ECN fallback but the same could be done through the cgrp2-bpf.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200109003517.3856825-1-kafai@fb.com
This patch adds BPF STRUCT_OPS support to libbpf.
The only sec_name convention is SEC(".struct_ops") to identify the
struct_ops implemented in BPF,
e.g. To implement a tcp_congestion_ops:
SEC(".struct_ops")
struct tcp_congestion_ops dctcp = {
.init = (void *)dctcp_init, /* <-- a bpf_prog */
/* ... some more func prts ... */
.name = "bpf_dctcp",
};
Each struct_ops is defined as a global variable under SEC(".struct_ops")
as above. libbpf creates a map for each variable and the variable name
is the map's name. Multiple struct_ops is supported under
SEC(".struct_ops").
In the bpf_object__open phase, libbpf will look for the SEC(".struct_ops")
section and find out what is the btf-type the struct_ops is
implementing. Note that the btf-type here is referring to
a type in the bpf_prog.o's btf. A "struct bpf_map" is added
by bpf_object__add_map() as other maps do. It will then
collect (through SHT_REL) where are the bpf progs that the
func ptrs are referring to. No btf_vmlinux is needed in
the open phase.
In the bpf_object__load phase, the map-fields, which depend
on the btf_vmlinux, are initialized (in bpf_map__init_kern_struct_ops()).
It will also set the prog->type, prog->attach_btf_id, and
prog->expected_attach_type. Thus, the prog's properties do
not rely on its section name.
[ Currently, the bpf_prog's btf-type ==> btf_vmlinux's btf-type matching
process is as simple as: member-name match + btf-kind match + size match.
If these matching conditions fail, libbpf will reject.
The current targeting support is "struct tcp_congestion_ops" which
most of its members are function pointers.
The member ordering of the bpf_prog's btf-type can be different from
the btf_vmlinux's btf-type. ]
Then, all obj->maps are created as usual (in bpf_object__create_maps()).
Once the maps are created and prog's properties are all set,
the libbpf will proceed to load all the progs.
bpf_map__attach_struct_ops() is added to register a struct_ops
map to a kernel subsystem.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200109003514.3856730-1-kafai@fb.com
test_overhead changes task comm in order to estimate BPF trampoline
overhead but never sets the comm back to the original one.
We have the tests (like core_reloc.c) that have 'test_progs'
as hard-coded expected comm, so let's try to preserve the
original comm.
Currently, everything works because the order of execution is:
first core_recloc, then test_overhead; but let's make it a bit
future-proof.
Other related changes: use 'test_overhead' as new comm instead of
'test' to make it easy to debug and drop '\n' at the end.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Petar Penkov <ppenkov@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200108192132.189221-1-sdf@google.com
Fix unsafe unaligned pointer usage in usbip network interfaces. usbip tool
build fails with new gcc -Werror=address-of-packed-member checks.
usbip_network.c: In function ‘usbip_net_pack_usb_device’:
usbip_network.c:79:32: error: taking address of packed member of ‘struct usbip_usb_device’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
79 | usbip_net_pack_uint32_t(pack, &udev->busnum);
Fix with minor changes to pass by value instead of by address.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200109012416.2875-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a new probe section (misc) for probes not related to concrete
map types, program types, functions or kernel configuration. Introduce a
probe for large INSN limit as the first one in that section.
Example outputs:
# bpftool feature probe
[...]
Scanning miscellaneous eBPF features...
Large program size limit is available
# bpftool feature probe macros
[...]
/*** eBPF misc features ***/
#define HAVE_HAVE_LARGE_INSN_LIMIT
# bpftool feature probe -j | jq '.["misc"]'
{
"have_large_insn_limit": true
}
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Link: https://lore.kernel.org/bpf/20200108162428.25014-3-mrostecki@opensuse.org
Introduce a new probe which checks whether kernel has large maximum
program size which was increased in the following commit:
c04c0d2b96 ("bpf: increase complexity limit and maximum program size")
Based on the similar check in Cilium[0], authored by Daniel Borkmann.
[0] 657d0f585a
Co-authored-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Link: https://lore.kernel.org/bpf/20200108162428.25014-2-mrostecki@opensuse.org
The mis-spelling is found by checkpatch.pl, so fix them.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the NMI-window exiting related definitions to match the latest
Intel SDM. No functional changes.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename interrupt-windown exiting related definitions to match the
latest Intel SDM. No functional changes.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The recent MD5 tests added duplicate configuration in the default VRF.
This change exposed a bug in existing tests designed to verify no
connection when client and server are not in the same domain. The
server should be running bound to the vrf device with the client run
in the default VRF (the -2 option is meant for validating connection
data). Fix the option for both tests.
While technically this is a bug in previous releases, the tests are
properly failing since the default VRF does not have any routing
configuration so there really is no need to backport to prior releases.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test case to check that packets are not dropped when they need to be
routed and their destination is link-local, i.e., 169.254.0.0/16.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test case to check that packets are not dropped when they need to be
routed and their source IP equals to their destination IP.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test case to check that packets are not dropped when they need to be
routed and their multicast MAC mismatched to their multicast destination
IP.
i.e., destination IP is multicast and
* for IPV4: DMAC != {01-00-5E-0 (25 bits), DIP[22:0]}
* for IPV6: DMAC != {33-33-0 (16 bits), DIP[31:0]}
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test case to check that packets are not dropped when they need to be
routed and their source IP in class E, (i.e., 240.0.0.0 –
255.255.255.254).
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when some of the KSFT subsystems fails to build, the toplevel
KSFT Makefile just keeps carrying on with the build process.
This behaviour is expected and desirable especially in the context of a CI
system running KSelfTest, since it is not always easy to guarantee that the
most recent and esoteric dependencies are respected across all KSFT TARGETS
in a timely manner.
Unfortunately, as of now, this holds true only if the very last of the
built subsystems could have been successfully compiled: if the last of
those subsystem instead failed to build, such failure is taken as the whole
outcome of the Makefile target and the complete build/install process halts
even though many other preceding subsytems were in fact already built
successfully.
Fix the KSFT Makefile behaviour related to all/install targets in order
to fail as a whole only when the all/install targets have failed for all
of the requested TARGETS, while succeeding when at least one of TARGETS
has been successfully built.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Driver name is no longer printed out so update the README
examples to avoid confusion.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/157677692518.684.15385402529285904844.sendpatchset@octo
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Disable a couple of compilation warnings (which are treated as errors)
on strlcpy() definition and declaration, allowing users to compile perf
and kernel (objtool) when:
1. glibc have strlcpy() (such as in ALT Linux since 2004) objtool and
perf build fails with this (in gcc):
In file included from exec-cmd.c:3:
tools/include/linux/string.h:20:15: error: redundant redeclaration of ‘strlcpy’ [-Werror=redundant-decls]
20 | extern size_t strlcpy(char *dest, const char *src, size_t size);
2. clang ignores `-Wredundant-decls', but produces another warning when
building perf:
CC util/string.o
../lib/string.c:99:8: error: attribute declaration must precede definition [-Werror,-Wignored-attributes]
size_t __weak strlcpy(char *dest, const char *src, size_t size)
../../tools/include/linux/compiler.h:66:34: note: expanded from macro '__weak'
# define __weak __attribute__((weak))
/usr/include/bits/string_fortified.h:151:8: note: previous definition is here
__NTH (strlcpy (char *__restrict __dest, const char *__restrict __src,
Committer notes:
The
#pragma GCC diagnostic
directive was introduced in gcc 4.6, so check for that as well.
Fixes: ce99091 ("perf tools: Move strlcpy() from perf to tools/lib/string.c")
Fixes: 0215d59 ("tools lib: Reinstate strlcpy() header guard with __UCLIBC__")
Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=118481
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Dmitry Levin <ldv@altlinux.org>
Cc: Dmitry Levin <ldv@altlinux.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: kbuild test robot <lkp@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Cc: Vineet Gupta <vineet.gupta1@synopsys.com>
Link: http://lore.kernel.org/lkml/20191224172029.19690-1-vt@altlinux.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'e' and 'c' hotkeys were present for a long time, but not documented
in the help window, change 'e' to be a toggle so that it gets consistent
with other toggles like '+' and document it in the help window.
Keep 'c' as is for people used to it but don't document, as it is easier
to just use 'e' to show/hide all the callchains for a top level
histogram entry.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-pmyi5x34stlqmyu81rci94x9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This can happen in the --children mode, i.e. the default mode when
callchains are present, where one of the main entries may be a callchain
entry with no samples.
So far we were not providing any information about why an annotation
couldn't be provided even offering the Annotation option in the popup
menu.
Work is needed to allow for no-samples "annotation', i.e. to show the
disassembly anyway and allow for navigation, etc.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-0hhzj2de15o88cguy7h66zre@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the users presses ENTER in the main 'perf report/top' screen a
popup menu is presented, in it some hotkeys are suggested as
alternatives to using the menu, or for additional features.
At that point the user may try those hotkeys, so allow for that by
recording the key used and exiting, the caller then can check for that
possibility and process the hotkey.
I.e. try pressing ENTER, and then 'k' to exit and zoom into the kernel
map, using ESC then zooms out, etc.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ujfq3fw44kf6qrtfajl5dcsp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With this patch if an optional pointer is passed to ui__popup_menu()
then when any key that is not being handled (ENTER, ESC, etc) is typed,
it'll record that key in the pointer and return, allowing for hotkey
processing on the caller.
If NULL is passed, no change in logic, unhandled keys continue to be
ignored.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-6ojn19mqzgmrdm8kdoigic0m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes we're in an outer code, like the main hists browser popup menu
and the user follows a suggestion about using some hotkey, and that
hotkey is really handled by hists_browser__run(), so allow for calling
it with that hotkey, making it handle it instead of waiting for the user
to press one.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xv2l7i6o4urn37nv1h40ryfs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As a convenience, equivalent to pressing Enter in a line with a kernel
symbol and then selecting "Zoom" into the kernel DSO.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-vbnlnrpyfvz9deqoobtc3dz7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll use it to provide a top level hotkey to zoom into the kernel dso
directly.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ae9cjel6v05wjnz9r6z77b6x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Taking into account the current status of the callchain, i.e. if folded,
show "Expand", otherwise "Collapse", also show the name of the entry
that will be affected and mention the hotkeys for expanding/collapsing
all callchains below the main entry, the one that appears with/without
callchains.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-03arm6poo8463k5tfcfp7gkk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since previously pressing ENTER toggled expansion/collapse of callchain
entries and now brings up the same menu used when callchains are not
present, add an entry so that users can quickly figure out the change in
behaviour.
Its worth mentioning that we also always had 'e'/'c' to expand/collapse
all entries in a hist entry and 'E'/'C' for all hist entries.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-f9o03jo29fypvd8ly3j49d36@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When callchains are present the ENTER key switches from bringing up the
menu that offers Annotation, Zoom by DSO, etc to expanding/collapsing
one callchain level, causing confusion, fix it by making it consistently
bring up the menu and use '+' to expand/collapse one callchain level.
Next patch will also add an entry to the menu to allow
expanding/collapsing, so that people used to ENTER expanding one
callchain level can quickly find it and use it instead.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-bjz35omktig8cwn6lbj1ifns@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to set actions->ms.map since 599a2f38a9 ("perf hists browser:
Check sort keys before hot key actions"), as in that patch we bail out
if map is NULL.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 599a2f38a9 ("perf hists browser: Check sort keys before hot key actions")
Link: https://lkml.kernel.org/n/tip-wp1ssoewy6zihwwexqpohv0j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
GCC9 introduced string hardening mechanisms, which exhibits the error
during fs api compilation:
error: '__builtin_strncpy' specified bound 4096 equals destination size
[-Werror=stringop-truncation]
This comes when the length of copy passed to strncpy is is equal to
destination size, which could potentially lead to buffer overflow.
There is a need to mitigate this potential issue by limiting the size of
destination by 1 and explicitly terminate the destination with NULL.
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191211080109.18765-1-andrey.zhizhikin@leica-geosystems.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change the man page generation to asciidoc, because it's easier to use
and has been more commonly used in related projects. Remove the current
rst pages.
Add 3 man pages to have a base for more additions:
libperf.3 - overall description
libperf-counting.7 - counting basics explained on simple example
libperf-sampling.7 - sampling basics explained on simple example
The plan is to add more man pages to cover the basic API.
The build generates html and man pages:
$ cd tools/lib/perf/Documentation
$ make
ASCIIDOC libperf.xml
XMLTO libperf.3
ASCIIDOC libperf-counting.xml
XMLTO libperf-counting.7
ASCIIDOC libperf-sampling.xml
XMLTO libperf-sampling.7
ASCIIDOC libperf.html
ASCIIDOC libperf-counting.html
ASCIIDOC libperf-sampling.html
Add the following install targets:
install-man - man pages
install-html - html version of man pages
install-examples - examples mentioned in the man pages
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191206210612.8676-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move libperf from its current location under tools/perf to a separate
directory under tools/lib/.
Also change various paths (mainly includes) to reflect the libperf move
to a separate directory and add a new directory under MANIFEST.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191206210612.8676-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help understand failures.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-c951j3gvrgnrsyg7ki7pwkiz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow user to limit output to one or more CPUs. Really helpful on
systems with a large number of cpus.
Committer testing:
# perf sched record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.765 MB perf.data (1412 samples) ]
[root@quaco ~]# perf sched timehist | head
Samples do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
66307.802686 [0000] perf[13086] 0.000 0.000 0.000
66307.802700 [0000] migration/0[12] 0.000 0.001 0.014
66307.802766 [0001] perf[13086] 0.000 0.000 0.000
66307.802774 [0001] migration/1[15] 0.000 0.001 0.007
66307.802841 [0002] perf[13086] 0.000 0.000 0.000
66307.802849 [0002] migration/2[20] 0.000 0.001 0.008
66307.802913 [0003] perf[13086] 0.000 0.000 0.000
#
# perf sched timehist --cpu 2 | head
Samples do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
66307.802841 [0002] perf[13086] 0.000 0.000 0.000
66307.802849 [0002] migration/2[20] 0.000 0.001 0.008
66307.964485 [0002] <idle> 0.000 0.000 161.635
66307.964811 [0002] CPU 0/KVM[3589/3561] 0.000 0.056 0.325
66307.965477 [0002] <idle> 0.325 0.000 0.666
66307.965553 [0002] CPU 0/KVM[3589/3561] 0.666 0.024 0.076
66307.966456 [0002] <idle> 0.076 0.000 0.903
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191204173925.66976-1-dsahern@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use struct mmap_cpu_mask type for the tool's thread and mmap data
buffers to overcome current 1024 CPUs mask size limitation of cpu_set_t
type.
Currently glibc's cpu_set_t type has an internal mask size limit of 1024
CPUs.
Moving to the 'struct mmap_cpu_mask' type allows overcoming that limit.
The tools bitmap API is used to manipulate objects of 'struct mmap_cpu_mask'
type.
Committer notes:
To print the 'nbits' struct member we must use %zd, since it is a
size_t, this fixes the build in some toolchains/arches.
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/96d7e2ff-ce8b-c1e0-d52c-aa59ea96f0ea@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Declare a dedicated struct map_cpu_mask type for cpu masks of arbitrary
length.
The mask is available thru bits pointer and the mask length is kept in
nbits field. MMAP_CPU_MASK_BYTES() macro returns mask storage size in
bytes.
The mmap_cpu_mask__scnprintf() function can be used to log text
representation of the mask.
Committer notes:
To print the 'nbits' struct member we must use %zd, since it is a
size_t, this fixes the build in some toolchains/arches.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/0fd2454f-477f-d15a-f4ee-79bcbd2585ff@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend tools bitmap API with bitmap_equal() implementation.
The implementation has been derived from the kernel.
Extend tools bitmap API with bitmap_free() implementation for symmetry
with bitmap_alloc() function.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/43757993-0b28-d8af-a6c7-ede12e3a6877@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Userspace isn't allowed to access certain address ranges, make sure we
actually test that to at least some degree.
This would have caught the recent bug where the SLB fault handler was
incorrectly called on an out-of-range access when using the Radix MMU.
It also would have caught the bug we had in get_region_id() where we
were inserting SLB entries for bad addresses.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190520102051.12103-1-mpe@ellerman.id.au
Quite a bit of the test suite was designed to work with ancient kernels.
Thankfully we no longer have to deal with this. This commit updates
things that we can finally update and removes things that we can finally
remove, to avoid the build-up of the last several years as a result of
having to support ancient kernels. We can finally rely on suppress_
prefixlength being available. On the build side of things, the no-PIE
hack is no longer required, and we can bump some of the tools, repair
our m68k and i686-kvm support, and get better coverage of the static
branches used in the crypto lib and in udp_tunnel.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The loopback feature is only supported on a few drivers like broadcom,
mellanox, etc. The default veth driver has not supported it yet. To avoid
returning failed and making the runner feel confused, let's just skip
the test on drivers that not support loopback.
Fixes: ad11340994 ("selftests: Add loopback test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
UAPI Changes:
- Commandline parser: Add support for panel orientation, and per-mode options.
- Fix IOCTL naming for dma-buf heaps.
Cross-subsystem Changes:
- Rename DMA_HEAP_IOC_ALLOC to DMA_HEAP_IOCTL_ALLOC before it becomes abi.
- Change DMA-BUF system-heap's name to system.
- Fix leak in error handling in dma_heap_ioctl(), and make a symbol static.
- Fix udma-buf cpu access.
- Fix ti devicetree bindings.
Core Changes:
- Add CTA-861-G modes with VIC >= 193.
- Change error handling and remove bug_on in *drm_dev_init.
- Export drm_panel_of_backlight() correctly once more.
- Add support for lvds decoders.
- Convert drm/client and drm/(gem-,)fb-helper to drm-device based logging and update logging todo.
Driver Changes:
- Add support for dsi/px30 to rockchip.
- Add fb damage support to virtio.
- Use dma_resv locking wrappers in vc4, msm, etnaviv.
- Make functions in virtio static, and perform some simplifications.
- Add suspend support to sun4i.
- Add A64 mipi dsi support to sun4i.
- Add runtime pm suspend to komeda.
- Associated driver fixes.
-----BEGIN PGP SIGNATURE-----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=ye8f
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-01-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Commandline parser: Add support for panel orientation, and per-mode options.
- Fix IOCTL naming for dma-buf heaps.
Cross-subsystem Changes:
- Rename DMA_HEAP_IOC_ALLOC to DMA_HEAP_IOCTL_ALLOC before it becomes abi.
- Change DMA-BUF system-heap's name to system.
- Fix leak in error handling in dma_heap_ioctl(), and make a symbol static.
- Fix udma-buf cpu access.
- Fix ti devicetree bindings.
Core Changes:
- Add CTA-861-G modes with VIC >= 193.
- Change error handling and remove bug_on in *drm_dev_init.
- Export drm_panel_of_backlight() correctly once more.
- Add support for lvds decoders.
- Convert drm/client and drm/(gem-,)fb-helper to drm-device based logging and update logging todo.
Driver Changes:
- Add support for dsi/px30 to rockchip.
- Add fb damage support to virtio.
- Use dma_resv locking wrappers in vc4, msm, etnaviv.
- Make functions in virtio static, and perform some simplifications.
- Add suspend support to sun4i.
- Add A64 mipi dsi support to sun4i.
- Add runtime pm suspend to komeda.
- Associated driver fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/efc11139-1653-86bc-1b0f-0aefde219850@linux.intel.com
- Fix samples and selftests to zero passed-in buffer (Sargun Dhillon)
- Enforce zeroed buffer checking (Sargun Dhillon)
- Verify buffer sanity check in selftest (Sargun Dhillon)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=WgBI
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"Fixes for seccomp_notify_ioctl uapi sanity from Sargun Dhillon.
The bulk of this is fixing the surrounding samples and selftests so
that seccomp can correctly validate the seccomp_notify_ioctl buffer as
being initially zeroed.
Summary:
- Fix samples and selftests to zero passed-in buffer
- Enforce zeroed buffer checking
- Verify buffer sanity check in selftest"
* tag 'seccomp-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Catch garbage on SECCOMP_IOCTL_NOTIF_RECV
seccomp: Check that seccomp_notif is zeroed out by the user
selftests/seccomp: Zero out seccomp_notif
samples/seccomp: Zero out members based on seccomp_notif_sizes
Add tests for new TCP MD5 API for L3 domains (VRF).
A new namespace is added to create a duplicate configuration between
the VRF and default VRF to verify overlapping config is handled properly.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests for existing TCP MD5 APIs - both single address
config and the new extended API for prefixes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update nettest to implement TCP_MD5SIG_EXT for a prefix and a device.
Add a new option, -m, to specify a prefix and length to use with MD5
auth. The device option comes from the existing -d option. If either
are set and MD5 auth is requested, TCP_MD5SIG_EXT is used instead of
TCP_MD5SIG.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On failure to set MD5 password, do_server should return 1 so that the
program exits with 1 rather than 255. This used for negative testing
when adding MD5 with device option.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Send non-IP traffic to a port and observe that it gets prioritized
according to the lldptool app=$prio,1,0 rules.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds logic to the user_notification_basic test to set a member
of struct seccomp_notif to an invalid value to ensure that the kernel
returns EINVAL if any of the struct seccomp_notif members are set to
invalid values.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191230203811.4996-1-sargun@sargun.me
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The seccomp_notif structure should be zeroed out prior to calling the
SECCOMP_IOCTL_NOTIF_RECV ioctl. Previously, the kernel did not check
whether these structures were zeroed out or not, so these worked.
This patch zeroes out the seccomp_notif data structure prior to calling
the ioctl.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191229062451.9467-1-sargun@sargun.me
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull networking fixes from David Miller:
1) Fix big endian overflow in nf_flow_table, from Arnd Bergmann.
2) Fix port selection on big endian in nft_tproxy, from Phil Sutter.
3) Fix precision tracking for unbound scalars in bpf verifier, from
Daniel Borkmann.
4) Fix integer overflow in socket rcvbuf check in UDP, from Antonio
Messina.
5) Do not perform a neigh confirmation during a pmtu update over a
tunnel, from Hangbin Liu.
6) Fix DMA mapping leak in dpaa_eth driver, from Madalin Bucur.
7) Various PTP fixes for sja1105 dsa driver, from Vladimir Oltean.
8) Add missing to dummy definition of of_mdiobus_child_is_phy(), from
Geert Uytterhoeven
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
hsr: fix slab-out-of-bounds Read in hsr_debugfs_rename()
net/sched: add delete_empty() to filters and use it in cls_flower
tcp: Fix highest_sack and highest_sack_seq
ptp: fix the race between the release of ptp_clock and cdev
net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/S
Documentation: net: dsa: sja1105: Remove text about taprio base-time limitation
net: dsa: sja1105: Remove restriction of zero base-time for taprio offload
net: dsa: sja1105: Really make the PTP command read-write
net: dsa: sja1105: Take PTP egress timestamp by port, not mgmt slot
cxgb4/cxgb4vf: fix flow control display for auto negotiation
mlxsw: spectrum: Use dedicated policer for VRRP packets
mlxsw: spectrum_router: Skip loopback RIFs during MAC validation
net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs
net/sched: act_mirred: Pull mac prior redir to non mac_header_xmit device
net_sched: sch_fq: properly set sk->sk_pacing_status
bnx2x: Fix accounting of vlan resources among the PFs
bnx2x: Use appropriate define for vlan credit
of: mdio: Add missing inline to of_mdiobus_child_is_phy() dummy
net: phy: aquantia: add suspend / resume ops for AQR105
dpaa_eth: fix DMA mapping leak
...
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-12-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 127 non-merge commits during the last 17 day(s) which contain
a total of 110 files changed, 6901 insertions(+), 2721 deletions(-).
There are three merge conflicts. Conflicts and resolution looks as follows:
1) Merge conflict in net/bpf/test_run.c:
There was a tree-wide cleanup c593642c8b ("treewide: Use sizeof_field() macro")
which gets in the way with b590cb5f80 ("bpf: Switch to offsetofend in
BPF_PROG_TEST_RUN"):
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) +
sizeof_field(struct __sk_buff, priority),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority),
>>>>>>> 7c8dce4b16
There are a few occasions that look similar to this. Always take the chunk with
offsetofend(). Note that there is one where the fields differ in here:
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) +
sizeof_field(struct __sk_buff, tstamp),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs),
>>>>>>> 7c8dce4b16
Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to
850a88cc40 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN").
2) Merge conflict in arch/riscv/net/bpf_jit_comp.c:
(I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.)
<<<<<<< HEAD
if (is_13b_check(off, insn))
return -1;
emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx);
=======
emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx);
>>>>>>> 7c8dce4b16
Result should look like:
emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx);
3) Merge conflict in arch/riscv/include/asm/pgtable.h:
<<<<<<< HEAD
=======
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
#define vmemmap ((struct page *)VMEMMAP_START)
>>>>>>> 7c8dce4b16
Only take the BPF_* defines from there and move them higher up in the
same file. Remove the rest from the chunk. The VMALLOC_* etc defines
got moved via 01f52e16b8 ("riscv: define vmemmap before pfn_to_page
calls"). Result:
[...]
#define __S101 PAGE_READ_EXEC
#define __S110 PAGE_SHARED_EXEC
#define __S111 PAGE_SHARED_EXEC
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
[...]
Let me know if there are any other issues.
Anyway, the main changes are:
1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific
to a provided BPF object file. This provides an alternative, simplified API
compared to standard libbpf interaction. Also, add libbpf extern variable
resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko.
2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by
generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also,
add various BPF riscv JIT improvements, from Björn Töpel.
3) Extend bpftool to allow matching BPF programs and maps by name,
from Paul Chaignon.
4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI
flag for allowing updates without service interruption, from Andrey Ignatov.
5) Cleanup and simplification of ring access functions for AF_XDP with a
bonus of 0-5% performance improvement, from Magnus Karlsson.
6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of
audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa.
7) Move and extend test_select_reuseport into BPF program tests under
BPF selftests, from Jakub Sitnicki.
8) Various BPF sample improvements for xdpsock for customizing parameters
to set up and benchmark AF_XDP, from Jay Jayatheerthan.
9) Improve libbpf to provide a ulimit hint on permission denied errors.
Also change XDP sample programs to attach in driver mode by default,
from Toke Høiland-Jørgensen.
10) Extend BPF test infrastructure to allow changing skb mark from tc BPF
programs, from Nikita V. Shirokov.
11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King.
12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after
libbpf conversion, from Jesper Dangaard Brouer.
13) Minor misc improvements from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When auto-generated BPF skeleton C code is included from C++ application, it
triggers compilation error due to void * being implicitly casted to whatever
target pointer type. This is supported by C, but not C++. To solve this
problem, add explicit casts, where necessary.
To ensure issues like this are captured going forward, add skeleton usage in
test_cpp test.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191226210253.3132060-1-andriin@fb.com
Daniel Borkmann says:
====================
pull-request: bpf 2019-12-23
The following pull-request contains BPF updates for your *net* tree.
We've added 2 non-merge commits during the last 1 day(s) which contain
a total of 4 files changed, 34 insertions(+), 31 deletions(-).
The main changes are:
1) Fix libbpf build when building on a read-only filesystem with O=dir
option, from Namhyung Kim.
2) Fix a precision tracking bug for unknown scalars, from Daniel Borkmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix endianness issue in flowtable TCP flags dissector,
from Arnd Bergmann.
2) Extend flowtable test script with dnat rules, from Florian Westphal.
3) Reject padding in ebtables user entries and validate computed user
offset, reported by syzbot, from Florian Westphal.
4) Fix endianness in nft_tproxy, from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when bpftool cgroup show <path> has an error, no error
message is printed. This is confusing because the user may think the
result is empty.
Before the change:
$ bpftool cgroup show /sys/fs/cgroup
ID AttachType AttachFlags Name
$ echo $?
255
After the change:
$ ./bpftool cgroup show /sys/fs/cgroup
Error: can't query bpf programs attached to /sys/fs/cgroup: Operation
not permitted
v2: Rename check_query_cgroup_progs to cgroup_has_attached_progs
Signed-off-by: Hechao Li <hechaol@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191224011742.3714301-1-hechaol@fb.com
Clang patch [0] enables emitting relocatable generic ALU/ALU64 instructions
(i.e, shifts and arithmetic operations), as well as generic load/store
instructions. The former ones are already supported by libbpf as is. This
patch adds further support for load/store instructions. Relocatable field
offset is encoded in BPF instruction's 16-bit offset section and are adjusted
by libbpf based on target kernel BTF.
These Clang changes and corresponding libbpf changes allow for more succinct
generated BPF code by encoding relocatable field reads as a single
ST/LDX/STX instruction. It also enables relocatable access to BPF context.
Previously, if context struct (e.g., __sk_buff) was accessed with CO-RE
relocations (e.g., due to preserve_access_index attribute), it would be
rejected by BPF verifier due to modified context pointer dereference. With
Clang patch, such context accesses are both relocatable and have a fixed
offset from the point of view of BPF verifier.
[0] https://reviews.llvm.org/D71790
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191223180305.86417-1-andriin@fb.com
perf report/top:
Arnaldo Carvalho de Melo:
- Fix popup menu for entries in main kernel maps other than the main one,
e.g. ".init.text", where a non-initialized pointer was causing segfaults.
Jin Yao:
- Fix incorrectly added dimensions when switching perf.data file to another
via the popup menu.
libtraceevent:
Hewenliang:
- Fix memory leakage in filter_event().
perf hists:
Yuya Fujita:
- Fix variable name's inconsistency in hists__for_each() macro.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXgC4qQAKCRCyPKLppCJ+
J0b+AQDzWLDAgNJ/v98nhyXv6eC31/33R14rts+S72GBAidYSAD+Ip6zaFCSgtYE
XNv5a00ShOiJdUoDkBBMg4ksAqG8JQ0=
=jUUg
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.5-20191223' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
perf report/top:
Arnaldo Carvalho de Melo:
- Fix popup menu for entries in main kernel maps other than the main one,
e.g. ".init.text", where a non-initialized pointer was causing segfaults.
Jin Yao:
- Fix incorrectly added dimensions when switching perf.data file to another
via the popup menu.
libtraceevent:
Hewenliang:
- Fix memory leakage in filter_event().
perf hists:
Yuya Fujita:
- Fix variable name's inconsistency in hists__for_each() macro.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The rseq.h UAPI now documents that the rseq_cs field must be cleared
before reclaiming memory that contains the targeted struct rseq_cs, but
also that the rseq_cs field must be cleared before reclaiming memory of
the code pointed to by the rseq_cs start_ip and post_commit_offset
fields.
While we can expect that use of dlclose(3) will typically unmap
both struct rseq_cs and its associated code at once, nothing would
theoretically prevent a JIT from reclaiming the code without
reclaiming the struct rseq_cs, which would erroneously allow the
kernel to consider new code which is not a rseq critical section
as a rseq critical section following a code reclaim.
Suggested-by: Florian Weimer <fw@deneb.enyo.de>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Paul Turner <pjt@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
glibc 2.30 introduces gettid() in public headers, which clashes with
the internal static definition within rseq selftests.
Rename gettid() to rseq_gettid() to eliminate this symbol name clash.
Reported-by: Tommi T. Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Tommi T. Rantala <tommi.t.rantala@nokia.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Paul Turner <pjt@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
As the rseq selftests can run for a long period of time, disable the
timeout that the general selftests have.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Paul Turner <pjt@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This commit renames 'kunitconfig' to '.kunitconfig' so that it can be
automatically ignored by git and do not disturb people who want to type
'kernel/' by pressing only the 'k' and then 'tab' key.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
'kunit' writes the 'test.log' under the kernel source directory even
though a 'build_dir' option is given. As users who use the option might
expect the outputs to be placed under the specified directory, this
commit modifies the logic to write the log file under the 'build_dir'.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If both '--build_dir' and '--defconfig' are given, the handling of
'--defconfig' ignores '--build_dir' option. This commit modifies the
behavior to respect '--build_dir' option.
Reported-by: Brendan Higgins <brendanhiggins@google.com>
Suggested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
'--defconfig' option is handled by the 'main() of the 'kunit.py' but
again handled in following 'run_tests()'. This commit removes this
duplicated handling of the option in the 'run_tests()'.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
livepatch test configures the system and debug environment to run
tests. Some of these actions fail without root access and test
dumps several permission denied messages before it exits.
Fix test-state.sh to call setup_config instead of set_dynamic_debug
as suggested by Petr Mladek <pmladek@suse.com>
Fix it to check root uid and exit with skip code instead.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
firmware attempts to load test modules that require root access
and fail. Fix it to check for root uid and exit with skip code
instead.
Before this fix:
selftests: firmware: fw_run_tests.sh
modprobe: ERROR: could not insert 'test_firmware': Operation not permitted
You must have the following enabled in your kernel:
CONFIG_TEST_FIRMWARE=y
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
not ok 1 selftests: firmware: fw_run_tests.sh # SKIP
With this fix:
selftests: firmware: fw_run_tests.sh
skip all tests: must be run as root
not ok 1 selftests: firmware: fw_run_tests.sh # SKIP
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reviwed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
epoll build fails to find pthread lib. Fix Makefile to use LDLIBS
instead of LDFLAGS. LDLIBS is the right flag to use here with -l
option when invoking ld.
gcc -I../../../../../usr/include/ -lpthread epoll_wakeup_test.c -o .../tools/testing/selftests/filesystems/epoll/epoll_wakeup_test
/usr/bin/ld: /tmp/ccaZvJUl.o: in function `kill_timeout':
epoll_wakeup_test.c:(.text+0x4dd): undefined reference to `pthread_kill'
/usr/bin/ld: epoll_wakeup_test.c:(.text+0x4f2): undefined reference to `pthread_kill'
/usr/bin/ld: /tmp/ccaZvJUl.o: in function `epoll9':
epoll_wakeup_test.c:(.text+0x6382): undefined reference to `pthread_create'
/usr/bin/ld: epoll_wakeup_test.c:(.text+0x64d2): undefined reference to `pthread_create'
/usr/bin/ld: epoll_wakeup_test.c:(.text+0x6626): undefined reference to `pthread_join'
/usr/bin/ld: epoll_wakeup_test.c:(.text+0x684c): undefined reference to `pthread_tryjoin_np'
/usr/bin/ld: epoll_wakeup_test.c:(.text+0x6864): undefined reference to `pthread_kill'
/usr/bin/ld: epoll_wakeup_test.c:(.text+0x6878): undefined reference to `pthread_join'
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
I got the following error when I tried to build perf on a read-only
filesystem with O=dir option.
$ cd /some/where/ro/linux/tools/perf
$ make O=$HOME/build/perf
...
CC /home/namhyung/build/perf/lib.o
/bin/sh: bpf_helper_defs.h: Read-only file system
make[3]: *** [Makefile:184: bpf_helper_defs.h] Error 1
make[2]: *** [Makefile.perf:778: /home/namhyung/build/perf/libbpf.a] Error 2
make[2]: *** Waiting for unfinished jobs....
LD /home/namhyung/build/perf/libperf-in.o
AR /home/namhyung/build/perf/libperf.a
PERF_VERSION = 5.4.0
make[1]: *** [Makefile.perf:225: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
It was becaused bpf_helper_defs.h was generated in current directory.
Move it to OUTPUT directory.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191223061326.843366-1-namhyung@kernel.org
Pull networking fixes from David Miller:
1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso,
including adding a missing ipv6 match description.
2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi
Bhat.
3) Fix uninit value in bond_neigh_init(), from Eric Dumazet.
4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold.
5) Fix use after free in tipc_disc_rcv(), from Tuong Lien.
6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul
Chaignon.
7) Multicast MAC limit test is off by one in qede, from Manish Chopra.
8) Fix established socket lookup race when socket goes from
TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening
RCU grace period. From Eric Dumazet.
9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet.
10) Fix active backup transition after link failure in bonding, from
Mahesh Bandewar.
11) Avoid zero sized hash table in gtp driver, from Taehee Yoo.
12) Fix wrong interface passed to ->mac_link_up(), from Russell King.
13) Fix DSA egress flooding settings in b53, from Florian Fainelli.
14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost.
15) Fix double free in dpaa2-ptp code, from Ioana Ciornei.
16) Reject invalid MTU values in stmmac, from Jose Abreu.
17) Fix refcount leak in error path of u32 classifier, from Davide
Caratti.
18) Fix regression causing iwlwifi firmware crashes on boot, from Anders
Kaseorg.
19) Fix inverted return value logic in llc2 code, from Chan Shu Tak.
20) Disable hardware GRO when XDP is attached to qede, frm Manish
Chopra.
21) Since we encode state in the low pointer bits, dst metrics must be
at least 4 byte aligned, which is not necessarily true on m68k. Add
annotations to fix this, from Geert Uytterhoeven.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits)
sfc: Include XDP packet headroom in buffer step size.
sfc: fix channel allocation with brute force
net: dst: Force 4-byte alignment of dst_metrics
selftests: pmtu: fix init mtu value in description
hv_netvsc: Fix unwanted rx_table reset
net: phy: ensure that phy IDs are correctly typed
mod_devicetable: fix PHY module format
qede: Disable hardware gro when xdp prog is installed
net: ena: fix issues in setting interrupt moderation params in ethtool
net: ena: fix default tx interrupt moderation interval
net/smc: unregister ib devices in reboot_event
net: stmmac: platform: Fix MDIO init for platforms without PHY
llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)
net: hisilicon: Fix a BUG trigered by wrong bytes_compl
net: dsa: ksz: use common define for tag len
s390/qeth: don't return -ENOTSUPP to userspace
s390/qeth: fix promiscuous mode after reset
s390/qeth: handle error due to unsupported transport mode
cxgb4: fix refcount init for TC-MQPRIO offload
tc-testing: initial tdc selftests for cls_u32
...
- Restore the operation of the libnvdimm unit tests after the removal of
ioremap_nocache().
-----BEGIN PGP SIGNATURE-----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=HzZt
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fix-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Dan Williams:
"A minor regression fix.
The libnvdimm unit tests were expecting to mock calls to
ioremap_nocache() which disappeared in v5.5-rc1. This fix has appeared
in -next and collided with some cleanups that Christoph has planned
for v5.6, but he will fix up his branch once this goes in.
Summary:
- Restore the operation of the libnvdimm unit tests after the removal
of ioremap_nocache()"
* tag 'libnvdimm-fix-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
tools/testing/nvdimm: Fix mock support for ioremap
There is no a_r3, a_r4 in the testing topology.
It should be b_r1, b_r2. Also b_r1 mtu is 1400 and b_r2 mtu is 1500.
Fixes: e44e428f59 ("selftests: pmtu: add basic IPv4 and IPv6 PMTU tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test if the MSG_PEEK flags of recv(2) works as expected.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we now have several options, in the help we print the list
of all supported options and a brief description of them.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some tests can fail with transports that have a slightly
different behavior, so let's add the possibility to specify
which tests to skip.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before check if a send returns -EPIPE, we need to make sure the
connection is closed.
To do that, we use epoll API to wait EPOLLRDHUP or EPOLLHUP events
on the socket.
Reported-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The vsock_test.c program runs a test suite of AF_VSOCK test cases.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test cases will want to transfer data. This patch adds utility
functions to do this.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
See code comment for details.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many test cases will need to connect to the server or accept incoming
connections. This patch extracts these operations into utility
functions that can be reused.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move useful functions into a separate file in preparation for more
vsock test programs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The vsock_diag_test program directly included ../../../include/uapi/
headers from the source tree. Tests are supposed to use the
usr/include/linux/ headers that have been prepared with make
headers_install instead.
Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's follow-up for discussion [1]
CHECK and CHECK_FAIL macros in test_progs.h can affect errno in some
circumstances, e.g. if some code accidentally closes stdout. It makes
checking errno in patterns like this unreliable:
if (CHECK(!bpf_prog_attach_xattr(...), "tag", "msg"))
goto err;
CHECK_FAIL(errno != ENOENT);
, since by CHECK_FAIL time errno could be affected not only by
bpf_prog_attach_xattr but by CHECK as well.
Fix it by saving and restoring errno in the macros. There is no "Fixes"
tag since no problems were discovered yet and it's rather precaution.
test_progs was run with this change and no difference was identified.
[1] https://lore.kernel.org/bpf/20191219210907.GD16266@rdna-mbp.dhcp.thefacebook.com/
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191220000511.1684853-1-rdna@fb.com
Variable names are inconsistent in hists__for_each macro().
Due to this inconsistency, the macro replaces its second argument with
"fmt" regardless of its original name.
So far it works because only "fmt" is passed to the second argument.
However, this behavior is not expected and should be fixed.
Fixes: f0786af536 ("perf hists: Introduce hists__for_each_format macro")
Fixes: aa6f50af82 ("perf hists: Introduce hists__for_each_sort_list macro")
Signed-off-by: Yuya Fujita <fujita.yuya@fujitsu.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/OSAPR01MB1588E1C47AC22043175DE1B2E8520@OSAPR01MB1588.jpnprd01.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a map is create to represent the main kernel area (vmlinux) with
map__new2() we allocate an extra area to store a pointer to the 'struct
maps' for the kernel maps, so that we can access that struct when
loading ELF files or kallsyms, as we will need to split it in multiple
maps, one per kernel module or ELF section (such as ".init.text").
So when map->dso->kernel is non-zero, it is expected that
map__kmap(map)->kmaps to be set to the tree of kernel maps (modules,
chunks of the main kernel, bpf progs put in place via
PERF_RECORD_KSYMBOL, the main kernel).
This was not the case when we were splitting the main kernel into chunks
for its ELF sections, which ended up making 'perf report --children'
processing a perf.data file with callchains to trip on
__map__is_kernel(), when we press ENTER to see the popup menu for main
histogram entries that starts at a symbol in the ".init.text" ELF
section, e.g.:
- 8.83% 0.00% swapper [kernel.vmlinux].init.text [k] start_kernel
start_kernel
cpu_startup_entry
do_idle
cpuidle_enter
cpuidle_enter_state
intel_idle
Fix it.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20191218190120.GB13282@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We observed an issue that was some extra columns displayed after switching
perf data file in browser. The steps to reproduce:
1. perf record -a -e cycles,instructions -- sleep 3
2. perf report --group
3. In browser, we use hotkey 's' to switch to another perf.data
4. Now in browser, the extra columns 'Self' and 'Children' are displayed.
The issue is setup_sorting() executed again after repeat path, so dimensions
are added again.
This patch checks the last key returned from __cmd_report(). If it's
K_SWITCH_INPUT_DATA, skips the setup_sorting().
Fixes: ad0de0971b ("perf report: Enable the runtime switching of perf data file")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191220013722.20592-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is necessary to call free_arg(arg) when add_filter_type() returns NULL
in filter_event().
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Feilong Lin <linfeilong@huawei.com>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20191209063549.59941-1-hewenliang4@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test replacing a cgroup-bpf program attached with BPF_F_ALLOW_MULTI and
possible failure modes: invalid combination of flags, invalid
replace_bpf_fd, replacing a non-attachd to specified cgroup program.
Example of program replacing:
# gdb -q --args ./test_progs --name=cgroup_attach_multi
...
Breakpoint 1, test_cgroup_attach_multi () at cgroup_attach_multi.c:227
(gdb)
[1]+ Stopped gdb -q --args ./test_progs --name=cgroup_attach_multi
# bpftool c s /mnt/cgroup2/cgroup-test-work-dir/cg1
ID AttachType AttachFlags Name
2133 egress multi
2134 egress multi
# fg
gdb -q --args ./test_progs --name=cgroup_attach_multi
(gdb) c
Continuing.
Breakpoint 2, test_cgroup_attach_multi () at cgroup_attach_multi.c:233
(gdb)
[1]+ Stopped gdb -q --args ./test_progs --name=cgroup_attach_multi
# bpftool c s /mnt/cgroup2/cgroup-test-work-dir/cg1
ID AttachType AttachFlags Name
2139 egress multi
2134 egress multi
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/7b9b83e8d5fb82e15b034341bd40b6fb2431eeba.1576741281.git.rdna@fb.com
Convert test_cgroup_attach to prog_tests.
This change does a lot of things but in many cases it's pretty expensive
to separate them, so they go in one commit. Nevertheless the logic is
ketp as is and changes made are just moving things around, simplifying
them (w/o changing the meaning of the tests) and making prog_tests
compatible:
* split the 3 tests in the file into 3 separate files in prog_tests/;
* rename the test functions to test_<file_base_name>;
* remove unused includes, constants, variables and functions from every
test;
* replace `if`-s with or `if (CHECK())` where additional context should
be logged and with `if (CHECK_FAIL())` where line number is enough;
* switch from `log_err()` to logging via `CHECK()`;
* replace `assert`-s with `CHECK_FAIL()` to avoid crashing the whole
test_progs if one assertion fails;
* replace cgroup_helpers with test__join_cgroup() in
cgroup_attach_override only, other tests need more fine-grained
control for cgroup creation/deletion so cgroup_helpers are still used
there;
* simplify cgroup_attach_autodetach by switching to easiest possible
program since this test doesn't really need such a complicated program
as cgroup_attach_multi does;
* remove test_cgroup_attach.c itself.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/0ff19cc64d2dc5cf404349f07131119480e10e32.1576741281.git.rdna@fb.com
Introduce a new bpf_prog_attach_xattr function that, in addition to
program fd, target fd and attach type, accepts an extendable struct
bpf_prog_attach_opts.
bpf_prog_attach_opts relies on DECLARE_LIBBPF_OPTS macro to maintain
backward and forward compatibility and has the following "optional"
attach attributes:
* existing attach_flags, since it's not required when attaching in NONE
mode. Even though it's quite often used in MULTI and OVERRIDE mode it
seems to be a good idea to reduce number of arguments to
bpf_prog_attach_xattr;
* newly introduced attribute of BPF_PROG_ATTACH command: replace_prog_fd
that is fd of previously attached cgroup-bpf program to replace if
BPF_F_REPLACE flag is used.
The new function is named to be consistent with other xattr-functions
(bpf_prog_test_run_xattr, bpf_create_map_xattr, bpf_load_program_xattr).
The struct bpf_prog_attach_opts is supposed to be used with
DECLARE_LIBBPF_OPTS macro.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/bd6e0732303eb14e4b79cb128268d9e9ad6db208.1576741281.git.rdna@fb.com
The common use-case in production is to have multiple cgroup-bpf
programs per attach type that cover multiple use-cases. Such programs
are attached with BPF_F_ALLOW_MULTI and can be maintained by different
people.
Order of programs usually matters, for example imagine two egress
programs: the first one drops packets and the second one counts packets.
If they're swapped the result of counting program will be different.
It brings operational challenges with updating cgroup-bpf program(s)
attached with BPF_F_ALLOW_MULTI since there is no way to replace a
program:
* One way to update is to detach all programs first and then attach the
new version(s) again in the right order. This introduces an
interruption in the work a program is doing and may not be acceptable
(e.g. if it's egress firewall);
* Another way is attach the new version of a program first and only then
detach the old version. This introduces the time interval when two
versions of same program are working, what may not be acceptable if a
program is not idempotent. It also imposes additional burden on
program developers to make sure that two versions of their program can
co-exist.
Solve the problem by introducing a "replace" mode in BPF_PROG_ATTACH
command for cgroup-bpf programs being attached with BPF_F_ALLOW_MULTI
flag. This mode is enabled by newly introduced BPF_F_REPLACE attach flag
and bpf_attr.replace_bpf_fd attribute to pass fd of the old program to
replace
That way user can replace any program among those attached with
BPF_F_ALLOW_MULTI flag without the problems described above.
Details of the new API:
* If BPF_F_REPLACE is set but replace_bpf_fd doesn't have valid
descriptor of BPF program, BPF_PROG_ATTACH will return corresponding
error (EINVAL or EBADF).
* If replace_bpf_fd has valid descriptor of BPF program but such a
program is not attached to specified cgroup, BPF_PROG_ATTACH will
return ENOENT.
BPF_F_REPLACE is introduced to make the user intent clear, since
replace_bpf_fd alone can't be used for this (its default value, 0, is a
valid fd). BPF_F_REPLACE also makes it possible to extend the API in the
future (e.g. add BPF_F_BEFORE and BPF_F_AFTER if needed).
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Narkyiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/30cd850044a0057bdfcaaf154b7d2f39850ba813.1576741281.git.rdna@fb.com
- move test "e9a3 - Add u32 with source match" to u32.json, and change the
match pattern to catch all hnodes
- add testcases for relevant error paths of cls_u32 module
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NAT test currently covers snat (masquerade) only.
Also add a dnat rule and then check that a connecting to the
to-be-dnated address will work.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Daniel Borkmann says:
====================
pull-request: bpf 2019-12-19
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 269 insertions(+), 108 deletions(-).
The main changes are:
1) Fix lack of synchronization between xsk wakeup and destroying resources
used by xsk wakeup, from Maxim Mikityanskiy.
2) Fix pruning with tail call patching, untrack programs in case of verifier
error and fix a cgroup local storage tracking bug, from Daniel Borkmann.
3) Fix clearing skb->tstamp in bpf_redirect() when going from ingress to
egress which otherwise cause issues e.g. on fq qdisc, from Lorenz Bauer.
4) Fix compile warning of unused proc_dointvec_minmax_bpf_restricted() when
only cBPF is present, from Alexander Lobakin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Expand dummy prog generation such that we can easily check on return
codes and add few more test cases to make sure we keep on tracking
pruning behavior.
# ./test_verifier
[...]
#1066/p XDP pkt read, pkt_data <= pkt_meta', bad access 1 OK
#1067/p XDP pkt read, pkt_data <= pkt_meta', bad access 2 OK
Summary: 1580 PASSED, 0 SKIPPED, 0 FAILED
Also verified that JIT dump of added test cases looks good.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/df7200b6021444fd369376d227de917357285b65.1576789878.git.daniel@iogearbox.net
Fix yet another printf warning for %llu specifier on ppc64le. This time size_t
casting won't work, so cast to verbose `unsigned long long`.
Fixes: 166750bc1d ("libbpf: Support libbpf-provided extern variables")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191219052103.3515-1-andriin@fb.com
Naresh pointed out that libbpf builds fail on 32-bit architectures because
rlimit.rlim_cur is defined as 'unsigned long long' on those architectures.
Fix this by using %zu in printf and casting to size_t.
Fixes: dc3a2d2547 ("libbpf: Print hint about ulimit when getting permission denied error")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191219090236.905059-1-toke@redhat.com
Fix two issues in test_attach_probe:
1. it was not able to parse /proc/self/maps beyond the first line,
since %s means parse string until white space.
2. offset has to be accounted for otherwise uprobed address is incorrect.
Fixes: 1e8611bbdf ("selftests/bpf: add kprobe/uprobe selftests")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191219020442.1922617-1-ast@kernel.org
Add missing uapi header the BPF_PROG_TYPE_PERF_EVENT programs by
exporting struct user_regs_struct instead of struct pt_regs which is
in-kernel only.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191216091343.23260-9-bjorn.topel@gmail.com
Instead of all or nothing approach of overriding Kconfig file location, allow
to extend it with extra values and override chosen subset of values though
optional user-provided extra config, passed as a string through open options'
.kconfig option. If same config key is present in both user-supplied config
and Kconfig, user-supplied one wins. This allows applications to more easily
test various conditions despite host kernel's real configuration. If all of
BPF object's __kconfig externs are satisfied from user-supplied config, system
Kconfig won't be read at all.
Simplify selftests by not needing to create temporary Kconfig files.
Suggested-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191219002837.3074619-3-andriin@fb.com
There are cases in which BPF resource (program, map, etc) has to outlive
userspace program that "installed" it in the system in the first place.
When BPF program is attached, libbpf returns bpf_link object, which
is supposed to be destroyed after no longer necessary through
bpf_link__destroy() API. Currently, bpf_link destruction causes both automatic
detachment and frees up any resources allocated to for bpf_link in-memory
representation. This is inconvenient for the case described above because of
coupling of detachment and resource freeing.
This patch introduces bpf_link__disconnect() API call, which marks bpf_link as
disconnected from its underlying BPF resouces. This means that when bpf_link
is destroyed later, all its memory resources will be freed, but BPF resource
itself won't be detached.
This design allows to follow strict and resource-leak-free design by default,
while giving easy and straightforward way for user code to opt for keeping BPF
resource attached beyond lifetime of a bpf_link. For some BPF programs (i.e.,
FS-based tracepoints, kprobes, raw tracepoint, etc), user has to make sure to
pin BPF program to prevent kernel to automatically detach it on process exit.
This should typically be achived by pinning BPF program (or map in some cases)
in BPF FS.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191218225039.2668205-1-andriin@fb.com
-----BEGIN PGP SIGNATURE-----
iJYEABYIAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCXfrLASAcamFya2tvLnNh
a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0pZfAQD9F5Vjdqp3fWk+
pxt+eD9+xaD2MYuSVO2AEVBC949vdQD/TP7xnb66w7n9YtMtm9MgvysHAakJYeAe
l4XsHAiPHgI=
=CFIs
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-20191219' of git://git.infradead.org/users/jjs/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Bunch of fixes for rc3"
* tag 'tpmdd-next-20191219' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm/tpm_ftpm_tee: add shutdown call back
tpm: selftest: cleanup after unseal with wrong auth/policy test
tpm: selftest: add test covering async mode
tpm: fix invalid locking in NONBLOCKING mode
security: keys: trusted: fix lost handle flush
tpm_tis: reserve chip for duration of tpm_tis_core_init
KEYS: asymmetric: return ENOMEM if akcipher_request_alloc() fails
KEYS: remove CONFIG_KEYS_COMPAT
allow to pass skb's mark field into bpf_prog_test_run ctx
for BPF_PROG_TYPE_SCHED_CLS prog type. that would allow
to test bpf programs which are doing decision based on this
field
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Work-around what appears to be a bug in rst2man convertion tool, used to
create man pages out of reStructureText-formatted documents. If text line
starts with dot, rst2man will put it in resulting man file verbatim. This
seems to cause man tool to interpret it as a directive/command (e.g., `.bs`), and
subsequently not render entire line because it's unrecognized one.
Enclose '.xxx' words in extra formatting to work around.
Fixes: cb21ac5885 ("bpftool: Add gen subcommand manpage")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com
Link: https://lore.kernel.org/bpf/20191218221707.2552199-1-andriin@fb.com
Change format string referring to just single argument out of two available.
Some versions of libc can reject such format string.
Reported-by: Nikita Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191218214314.2403729-1-andriin@fb.com
Add TDC coverage for the new ETS Qdisc.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This tests the newly-added ETS Qdisc. It runs two to three streams of
traffic, each with a different priority. ETS Qdisc is supposed to allocate
bandwidth according to the DRR algorithm and given weights. After running
the traffic for a while, counters are compared for each stream to check
that the expected ratio is in fact observed.
In order for the DRR process to kick in, a traffic bottleneck must exist in
the first place. In slow path, such bottleneck can be implemented by
wrapping the ETS Qdisc inside a TBF or other shaper. This might however
make the configuration unoffloadable. Instead, on HW datapath, the
bottleneck would be set up by lowering port speed and configuring shared
buffer suitably.
Therefore the test is structured as a core component that implements the
testing, with two wrapper scripts that implement the details of slow path
resp. fast path configuration.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These two functions are used for starting several streams of traffic, and
then stopping them later. They will be handy for the test coverage of ETS
Qdisc. Move them from mlxsw-specific qos_lib.sh to the generic lib.sh.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add bpftool-gen.rst describing skeleton on the high level. Also include
a small, but complete, example BPF app (BPF side, userspace side, generated
skeleton) in example section to demonstrate skeleton API and its usage.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191218052552.2915188-4-andriin@fb.com
Drop BPF_EMBED_OBJ and struct bpf_embed_data now that skeleton automatically
embeds contents of its source object file. While BPF_EMBED_OBJ is useful
independently of skeleton, we are currently don't have any use cases utilizing
it, so let's remove them until/if we need it.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191218052552.2915188-3-andriin@fb.com
Embed contents of BPF object file used for BPF skeleton generation inside
skeleton itself. This allows to keep BPF object file and its skeleton in sync
at all times, and simpifies skeleton instantiation.
Also switch existing selftests to not require BPF_EMBED_OBJ anymore.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191218052552.2915188-2-andriin@fb.com
Libbpf is trying to recognize BPF program type based on its section name
during bpf_object__open() phase. This is not strictly enforced and user code
has ability to specify/override correct BPF program type after open. But if
BPF program is using custom section name, libbpf will still emit warnings,
which can be quite annoying to users. This patch reduces log level of
information messages emitted by libbpf if section name is not canonical. User
can still get a list of all supported section names as debug-level message.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191217234228.1739308-1-andriin@fb.com
This fixes two issues with the newly introduced libbpf_common.h file:
- The header failed to include <string.h> for the definition of memset()
- The new file was not included in the install_headers rule in the Makefile
Both of these issues cause breakage when installing libbpf with 'make
install' and trying to use it in applications.
Fixes: 544402d4b4 ("libbpf: Extract common user-facing helpers")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191217112810.768078-1-toke@redhat.com
Similarly to bpftool/libbpf output, make selftests/bpf output succinct
per-item output line. Output is roughly as follows:
$ make
...
CLANG-LLC [test_maps] pyperf600.o
CLANG-LLC [test_maps] strobemeta.o
CLANG-LLC [test_maps] pyperf100.o
EXTRA-OBJ [test_progs] cgroup_helpers.o
EXTRA-OBJ [test_progs] trace_helpers.o
BINARY test_align
BINARY test_verifier_log
GEN-SKEL [test_progs] fexit_bpf2bpf.skel.h
GEN-SKEL [test_progs] test_global_data.skel.h
GEN-SKEL [test_progs] sendmsg6_prog.skel.h
...
To see the actual command invocation, verbose mode can be turned on with V=1
argument:
$ make V=1
... very verbose output ...
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191217061425.2346359-1-andriin@fb.com
If we compile tools/acpi target in the top source directory, we'd get a
compilation error showing as bellow:
# make tools/acpi
DESCEND power/acpi
DESCEND tools/acpidbg
CC tools/acpidbg/acpidbg.o
Assembler messages:
Fatal error: can't create /home/lzy/kernel-upstream/power/acpi/\
tools/acpidbg/acpidbg.o: No such file or directory
../../Makefile.rules:26: recipe for target '/home/lzy/kernel-upstream/\
power/acpi/tools/acpidbg/acpidbg.o' failed
make[3]: *** [/home/lzy/kernel-upstream//power/acpi/tools/acpidbg/\
acpidbg.o] Error 1
Makefile:19: recipe for target 'acpidbg' failed
make[2]: *** [acpidbg] Error 2
Makefile:54: recipe for target 'acpi' failed
make[1]: *** [acpi] Error 2
Makefile:1607: recipe for target 'tools/acpi' failed
make: *** [tools/acpi] Error 2
Fixes: d5a4b1a540 ("tools/power/acpi: Remove direct kernel source include reference")
Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull perf tooling fixes from Ingo Molnar:
"These are all perf tooling changes: most of them are fixes.
Note that the large CPU count related fixes go beyond regression
fixes, but the IPI-flood symptoms are severe enough that I think
justifies their inclusion"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
perf vendor events s390: Remove name from L1D_RO_EXCL_WRITES description
perf vendor events s390: Fix counter long description for DTLB1_GPAGE_WRITES
libtraceevent: Allow custom libdir path
perf header: Fix false warning when there are no duplicate cache entries
perf metricgroup: Fix printing event names of metric group with multiple events
perf/x86/pmu-events: Fix Kernel_Utilization metric
perf top: Do not bail out when perf_env__read_cpuid() returns ENOSYS
perf arch: Make the default get_cpuid() return compatible error
tools headers kvm: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Update tools's copy of drm.h headers
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
perf inject: Fix processing of ID index for injected instruction tracing
perf report: Bail out --mem-mode if mem info is not available
perf report: Make -F more strict like -s
perf report/top TUI: Replace pr_err() with ui__error()
libtraceevent: Copy pkg-config file to output folder when using O=
libtraceevent: Fix lib installation with O=
perf kvm: Clarify the 'perf kvm' -i and -o command line options
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
perf beauty: Add CLEAR_SIGHAND support for clone's flags arg
...
This is more consistent with the DMA and DRM frameworks convention. This
patch is only a name change, no logic is changed.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191216133405.1001-2-afd@ti.com
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
-----BEGIN PGP SIGNATURE-----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=b15X
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-12-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.6:
UAPI Changes:
- Add support for DMA-BUF HEAPS.
Cross-subsystem Changes:
- mipi dsi definition updates, pulled into drm-intel as well.
- Add lockdep annotations for dma_resv vs mmap_sem and fs_reclaim.
- Remove support for dma-buf kmap/kunmap.
- Constify fb_ops in all fbdev drivers, including drm drivers and drm-core, and media as well.
Core Changes:
- Small cleanups to ttm.
- Fix SCDC definition.
- Assorted cleanups to core.
- Add todo to remove load/unload hooks, and use generic fbdev emulation.
- Assorted documentation updates.
- Use blocking ww lock in ttm fault handler.
- Remove drm_fb_helper_fbdev_setup/teardown.
- Warning fixes with W=1 for atomic.
- Use drm_debug_enabled() instead of drm_debug flag testing in various drivers.
- Fallback to nontiled mode in fbdev emulation when not all tiles are present. (Later on reverted)
- Various kconfig indentation fixes in core and drivers.
- Fix freeing transactions in dp-mst correctly.
- Sean Paul is steping down as core maintainer. :-(
- Add lockdep annotations for atomic locks vs dma-resv.
- Prevent use-after-free for a bad job in drm_scheduler.
- Fill out all block sizes in the P01x and P210 definitions.
- Avoid division by zero in drm/rect, and fix bounds.
- Add drm/rect selftests.
- Add aspect ratio and alternate clocks for HDMI 4k modes.
- Add todo for drm_framebuffer_funcs and fb_create cleanup.
- Drop DRM_AUTH for prime import/export ioctls.
- Clear DP-MST payload id tables downstream when initializating.
- Fix for DSC throughput definition.
- Add extra FEC definitions.
- Fix fake offset in drm_gem_object_funs.mmap.
- Stop using encoder->bridge in core directly
- Handle bridge chaining slightly better.
- Add backlight support to drm/panel, and use it in many panel drivers.
- Increase max number of y420 modes from 128 to 256, as preparation to add the new modes.
Driver Changes:
- Small fixes all over.
- Fix documentation in vkms.
- Fix mmap_sem vs dma_resv in nouveau.
- Small cleanup in komeda.
- Add page flip support in gma500 for psb/cdv.
- Add ddc symlink in the connector sysfs directory for many drivers.
- Add support for analogic an6345, and fix small bugs in it.
- Add atomic modesetting support to ast.
- Fix radeon fault handler VMA race.
- Switch udl to use generic shmem helpers.
- Unconditional vblank handling for mcde.
- Miscellaneous fixes to mcde.
- Tweak debug output from komeda using debugfs.
- Add gamma and color transform support to komeda for DOU-IPS.
- Add support for sony acx424AKP panel.
- Various small cleanups to gma500.
- Use generic fbdev emulation in udl, and replace udl_framebuffer with generic implementation.
- Add support for Logic PD Type 28 panel.
- Use drm_panel_* wrapper functions in exynos/tegra/msm.
- Add devicetree bindings for generic DSI panels.
- Don't include drm_pci.h directly in many drivers.
- Add support for begin/end_cpu_access in udmabuf.
- Stop using drm_get_pci_dev in gma500 and mga200.
- Fixes to UDL damage handling, and use dma_buf_begin/end_cpu_access.
- Add devfreq thermal support to panfrost.
- Fix hotplug with daisy chained monitors by removing VCPI when disabling topology manager.
- meson: Add support for OSD1 plane AFBC commit.
- Stop displaying garbage when toggling ast primary plane on/off.
- More cleanups and fixes to UDL.
- Add D32 suport to komeda.
- Remove globle copy of drm_dev in gma500.
- Add support for Boe Himax8279d MIPI-DSI LCD panel.
- Add support for ingenic JZ4770 panel.
- Small null pointer deference fix in ingenic.
- Remove support for the special tfp420 driver, as there is a generic way to do it.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba73535a-9334-5302-2e1f-5208bd7390bd@linux.intel.com
Unseal with wrong auth or wrong policy test affects DA lockout
and eventually causes the tests to fail with:
"ProtocolError: TPM_RC_LOCKOUT: rc=0x00000921"
when the tests run multiple times.
Send tpm clear command after the test to reset the DA counters.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Add a test that sends a tpm cmd in an async mode.
Currently there is a gap in test coverage with regards
to this functionality.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
WireGuard has been using this on build.wireguard.com for the last
several years with considerable success. It allows for very quick and
iterative development cycles, and supports several platforms.
To run the test suite on your current platform in QEMU:
$ make -C tools/testing/selftests/wireguard/qemu -j$(nproc)
To run it with KASAN and such turned on:
$ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc)
To run it emulated for another platform in QEMU:
$ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc)
At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k,
mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64.
The system supports incremental rebuilding, so it should be very fast to
change a single file and then test it out and have immediate feedback.
This requires for the right toolchain and qemu to be installed prior.
I've had success with those from musl.cc.
This is tailored for WireGuard at the moment, though later projects
might generalize it for other network testing.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Probably the single most common error newcomers to XDP are stumped by is
the 'permission denied' error they get when trying to load their program
and 'ulimit -l' is set too low. For examples, see [0], [1].
Since the error code is UAPI, we can't change that. Instead, this patch
adds a few heuristics in libbpf and outputs an additional hint if they are
met: If an EPERM is returned on map create or program load, and geteuid()
shows we are root, and the current RLIMIT_MEMLOCK is not infinity, we
output a hint about raising 'ulimit -l' as an additional log line.
[0] https://marc.info/?l=xdp-newbies&m=157043612505624&w=2
[1] https://github.com/xdp-project/xdp-tutorial/issues/86
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191216181204.724953-1-toke@redhat.com
In 7fcfa9a2d9 an unintended prefix "Counter:18 Name:" was removed from
the description for L1D_RO_EXCL_WRITES, but the extra name remained in
the description. Remove it too.
Fixes: 7fcfa9a2d9 ("perf list: Fix s390 counter long description for L1D_RO_EXCL_WRITES")
Signed-off-by: Ed Maste <emaste@freebsd.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Link: http://lore.kernel.org/lkml/20191212145346.5026-1-emaste@freefall.freebsd.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cf_z13 counter DTLB1_GPAGE_WRITES included a prefix
'Counter:132\tName:'.
This is incorrect; remove the prefix as with 7fcfa9a2d9 for cf_z14.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Link: http://lore.kernel.org/lkml/20191212143446.88582-1-emaste@freefall.freebsd.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When I use prefix=/usr and try to install libtraceevent in my laptop it
tries to install in /usr/lib64. I am not having any folder as /usr/lib64
and also the debian policy doesnot allow installing in /usr/lib64. It
should be in /usr/lib/x86_64-linux-gnu/.
Quote: No package for a 64 bit architecture may install files in
/usr/lib64/ or in a subdirectory of it.
ref: https://www.debian.org/doc/debian-policy/ch-opersys.html
Make it more flexible by allowing to mention libdir_relative while
installing so that distros can mention the path according to their
policy or use the default one.
Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191207111440.6574-1-sudipm.mukherjee@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ident variable has already been declared at the top of the function
and doesn't need to be re-declared.
Fixes: 985ead416d ("bpftool: Add skeleton codegen command")
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191216112733.GA28366@Omicron
In btf__align_of() variable name 't' is shadowed by inner block
declaration of another variable with same name. Patch renames
variables in order to fix it.
CC sharedobjs/btf.o
btf.c: In function ‘btf__align_of’:
btf.c:303:21: error: declaration of ‘t’ shadows a previous local [-Werror=shadow]
303 | int i, align = 1, t;
| ^
btf.c:283:25: note: shadowed declaration is here
283 | const struct btf_type *t = btf__type_by_id(btf, id);
|
Fixes: 3d208f4ca1 ("libbpf: Expose btf__align_of() API")
Signed-off-by: Prashant Bhole <prashantbhole.linux@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191216082738.28421-1-prashantbhole.linux@gmail.com
Some data stuctures in kernel are defined with either zero-sized array or
flexible (dimensionless) array at the end of a struct. Actual data of such
array follows in memory immediately after the end of that struct, forming its
variable-sized "body" of elements. Support such access pattern in CO-RE
relocation handling.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191215070844.1014385-2-andriin@fb.com
Add a set of tests validating libbpf-provided extern variables. One crucial
feature that's tested is dead code elimination together with using invalid BPF
helper. CONFIG_MISSING is not supposed to exist and should always be specified
by libbpf as zero, which allows BPF verifier to correctly do branch pruning
and not fail validation, when invalid BPF helper is called from dead if branch.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191214014710.3449601-5-andriin@fb.com
Add support for generation of mmap()-ed read-only view of libbpf-provided
extern variables. As externs are not supposed to be provided by user code
(that's what .data, .bss, and .rodata is for), don't mmap() it initially. Only
after skeleton load is performed, map .extern contents as read-only memory.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191214014710.3449601-4-andriin@fb.com
Add support for extern variables, provided to BPF program by libbpf. Currently
the following extern variables are supported:
- LINUX_KERNEL_VERSION; version of a kernel in which BPF program is
executing, follows KERNEL_VERSION() macro convention, can be 4- and 8-byte
long;
- CONFIG_xxx values; a set of values of actual kernel config. Tristate,
boolean, strings, and integer values are supported.
Set of possible values is determined by declared type of extern variable.
Supported types of variables are:
- Tristate values. Are represented as `enum libbpf_tristate`. Accepted values
are **strictly** 'y', 'n', or 'm', which are represented as TRI_YES, TRI_NO,
or TRI_MODULE, respectively.
- Boolean values. Are represented as bool (_Bool) types. Accepted values are
'y' and 'n' only, turning into true/false values, respectively.
- Single-character values. Can be used both as a substritute for
bool/tristate, or as a small-range integer:
- 'y'/'n'/'m' are represented as is, as characters 'y', 'n', or 'm';
- integers in a range [-128, 127] or [0, 255] (depending on signedness of
char in target architecture) are recognized and represented with
respective values of char type.
- Strings. String values are declared as fixed-length char arrays. String of
up to that length will be accepted and put in first N bytes of char array,
with the rest of bytes zeroed out. If config string value is longer than
space alloted, it will be truncated and warning message emitted. Char array
is always zero terminated. String literals in config have to be enclosed in
double quotes, just like C-style string literals.
- Integers. 8-, 16-, 32-, and 64-bit integers are supported, both signed and
unsigned variants. Libbpf enforces parsed config value to be in the
supported range of corresponding integer type. Integers values in config can
be:
- decimal integers, with optional + and - signs;
- hexadecimal integers, prefixed with 0x or 0X;
- octal integers, starting with 0.
Config file itself is searched in /boot/config-$(uname -r) location with
fallback to /proc/config.gz, unless config path is specified explicitly
through bpf_object_open_opts' kernel_config_path option. Both gzipped and
plain text formats are supported. Libbpf adds explicit dependency on zlib
because of this, but this shouldn't be a problem, given libelf already depends
on zlib.
All detected extern variables, are put into a separate .extern internal map.
It, similarly to .rodata map, is marked as read-only from BPF program side, as
well as is frozen on load. This allows BPF verifier to track extern values as
constants and perform enhanced branch prediction and dead code elimination.
This can be relied upon for doing kernel version/feature detection and using
potentially unsupported field relocations or BPF helpers in a CO-RE-based BPF
program, while still having a single version of BPF program running on old and
new kernels. Selftests are validating this explicitly for unexisting BPF
helper.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191214014710.3449601-3-andriin@fb.com
Add a simple selftests validating datasection-to-struct layour dumping. Global
variables are constructed in such a way as to cause both natural and
artificial padding (through custom alignment requirement).
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-17-andriin@fb.com
Convert few more selftests to use generated BPF skeletons as a demonstration
on how to use it.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-16-andriin@fb.com
Add `bpftool gen skeleton` command, which takes in compiled BPF .o object file
and dumps a BPF skeleton struct and related code to work with that skeleton.
Skeleton itself is tailored to a specific structure of provided BPF object
file, containing accessors (just plain struct fields) for every map and
program, as well as dedicated space for bpf_links. If BPF program is using
global variables, corresponding structure definitions of compatible memory
layout are emitted as well, making it possible to initialize and subsequently
read/update global variables values using simple and clear C syntax for
accessing fields. This skeleton majorly improves usability of
opening/loading/attaching of BPF object, as well as interacting with it
throughout the lifetime of loaded BPF object.
Generated skeleton struct has the following structure:
struct <object-name> {
/* used by libbpf's skeleton API */
struct bpf_object_skeleton *skeleton;
/* bpf_object for libbpf APIs */
struct bpf_object *obj;
struct {
/* for every defined map in BPF object: */
struct bpf_map *<map-name>;
} maps;
struct {
/* for every program in BPF object: */
struct bpf_program *<program-name>;
} progs;
struct {
/* for every program in BPF object: */
struct bpf_link *<program-name>;
} links;
/* for every present global data section: */
struct <object-name>__<one of bss, data, or rodata> {
/* memory layout of corresponding data section,
* with every defined variable represented as a struct field
* with exactly the same type, but without const/volatile
* modifiers, e.g.:
*/
int *my_var_1;
...
} *<one of bss, data, or rodata>;
};
This provides great usability improvements:
- no need to look up maps and programs by name, instead just
my_obj->maps.my_map or my_obj->progs.my_prog would give necessary
bpf_map/bpf_program pointers, which user can pass to existing libbpf APIs;
- pre-defined places for bpf_links, which will be automatically populated for
program types that libbpf knows how to attach automatically (currently
tracepoints, kprobe/kretprobe, raw tracepoint and tracing programs). On
tearing down skeleton, all active bpf_links will be destroyed (meaning BPF
programs will be detached, if they are attached). For cases in which libbpf
doesn't know how to auto-attach BPF program, user can manually create link
after loading skeleton and they will be auto-detached on skeleton
destruction:
my_obj->links.my_fancy_prog = bpf_program__attach_cgroup_whatever(
my_obj->progs.my_fancy_prog, <whatever extra param);
- it's extremely easy and convenient to work with global data from userspace
now. Both for read-only and read/write variables, it's possible to
pre-initialize them before skeleton is loaded:
skel = my_obj__open(raw_embed_data);
my_obj->rodata->my_var = 123;
my_obj__load(skel); /* 123 will be initialization value for my_var */
After load, if kernel supports mmap() for BPF arrays, user can still read
(and write for .bss and .data) variables values, but at that point it will
be directly mmap()-ed to BPF array, backing global variables. This allows to
seamlessly exchange data with BPF side. From userspace program's POV, all
the pointers and memory contents stay the same, but mapped kernel memory
changes to point to created map.
If kernel doesn't yet support mmap() for BPF arrays, it's still possible to
use those data section structs to pre-initialize .bss, .data, and .rodata,
but after load their pointers will be reset to NULL, allowing user code to
gracefully handle this condition, if necessary.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-14-andriin@fb.com
Add new set of APIs, allowing to open/load/attach BPF object through BPF
object skeleton, generated by bpftool for a specific BPF object file. All the
xxx_skeleton() APIs wrap up corresponding bpf_object_xxx() APIs, but
additionally also automate map/program lookups by name, global data
initialization and mmap()-ing, etc. All this greatly improves and simplifies
userspace usability of working with BPF programs. See follow up patches for
examples.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-13-andriin@fb.com
It's quite spammy. And now that bpf_object__open() is trying to determine
program type from its section name, we are getting these verbose messages all
the time. Reduce their log level to DEBUG.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-12-andriin@fb.com
Move BTF ID determination for BPF_PROG_TYPE_TRACING programs to a load phase.
Performing it at open step is inconvenient, because it prevents BPF skeleton
generation on older host kernel, which doesn't contain BTF_KIND_FUNCs
information in vmlinux BTF. This is a common set up, though, when, e.g.,
selftests are compiled on older host kernel, but the test program itself is
executed in qemu VM with bleeding edge kernel. Having this BTF searching
performed at load time allows to successfully use bpf_object__open() for
codegen and inspection of BPF object file.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-11-andriin@fb.com
Refactor global data map initialization to use anonymous mmap()-ed memory
instead of malloc()-ed one. This allows to do a transparent re-mmap()-ing of
already existing memory address to point to BPF map's memory after
bpf_object__load() step (done in follow up patch). This choreographed setup
allows to have a nice and unsurprising way to pre-initialize read-only (and
r/w as well) maps by user and after BPF map creation keep working with
mmap()-ed contents of this map. All in a way that doesn't require user code to
update any pointers: the illusion of working with memory contents is preserved
before and after actual BPF map instantiation.
Selftests and runqslower example demonstrate this feature in follow up patches.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-10-andriin@fb.com
Add APIs to get BPF program function name, as opposed to bpf_program__title(),
which returns BPF program function's section name. Function name has a benefit
of being a valid C identifier and uniquely identifies a specific BPF program,
while section name can be duplicated across multiple independent BPF programs.
Add also bpf_object__find_program_by_name(), similar to
bpf_object__find_program_by_title(), to facilitate looking up BPF programs by
their C function names.
Convert one of selftests to new API for look up.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-9-andriin@fb.com
Expose API that allows to emit type declaration and field/variable definition
(if optional field name is specified) in valid C syntax for any provided BTF
type. This is going to be used by bpftool when emitting data section layout as
a struct. As part of making this API useful in a stand-alone fashion, move
initialization of some of the internal btf_dump state to earlier phase.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-8-andriin@fb.com
LIBBPF_API and DECLARE_LIBBPF_OPTS are needed in many public libbpf API
headers. Extract them into libbpf_common.h to avoid unnecessary
interdependency between btf.h, libbpf.h, and bpf.h or code duplication.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-6-andriin@fb.com
Add a convenience macro BPF_EMBED_OBJ, which allows to embed other files
(typically used to embed BPF .o files) into a hosting userspace programs. To
C program it is exposed as struct bpf_embed_data, containing a pointer to
raw data and its size in bytes.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-5-andriin@fb.com
Few libbpf APIs are not public but currently exposed through libbpf.h to be
used by bpftool. Move them to libbpf_internal.h, where intent of being
non-stable and non-public is much more obvious.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-4-andriin@fb.com
Generalize BPF program attaching and allow libbpf to auto-detect type (and
extra parameters, where applicable) and attach supported BPF program types
based on program sections. Currently this is supported for:
- kprobe/kretprobe;
- tracepoint;
- raw tracepoint;
- tracing programs (typed raw TP/fentry/fexit).
More types support can be trivially added within this framework.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-3-andriin@fb.com
Reorganize bpf_object__open and bpf_object__load steps such that
bpf_object__open doesn't need root access. This was previously done for
feature probing and BTF sanitization. This doesn't have to happen on open,
though, so move all those steps into the load phase.
This is important, because it makes it possible for tools like bpftool, to
just open BPF object file and inspect their contents: programs, maps, BTF,
etc. For such operations it is prohibitive to require root access. On the
other hand, there is a lot of custom libbpf logic in those steps, so its best
avoided for tools to reimplement all that on their own.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-2-andriin@fb.com
Fedora binutils has been patched to show "other info" for a symbol at the
end of the line. This was done in order to support unmaintained scripts
that would break with the extra info. [1]
[1] b8265c46f7
This in turn has been done to fix the build of ruby, because of checksec.
[2] Thanks Michael Ellerman for the pointer.
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1479302
As libbpf Makefile is not unmaintained, we can simply deal with either
output format, by just removing the "other info" field, as it always comes
inside brackets.
Fixes: 3464afdf11 (libbpf: Fix readelf output parsing on powerpc with recent binutils)
Reported-by: Justin Forbes <jmforbes@linuxtx.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Link: https://lore.kernel.org/bpf/20191213101114.GA3986@calabresa
This patch implements lookup by name for maps and changes the behavior of
lookups by tag to be consistent with prog subcommands. Similarly to
program subcommands, the show and dump commands will return all maps with
the given name (or tag), whereas other commands will error out if several
maps have the same name (resp. tag).
When a map has BTF info, it is dumped in JSON with available BTF info.
This patch requires that all matched maps have BTF info before switching
the output format to JSON.
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/8de1c9f273860b3ea1680502928f4da2336b853e.1576263640.git.paul.chaignon@gmail.com
When working with frequently modified BPF programs, both the ID and the
tag may change. bpftool currently doesn't provide a "stable" way to match
such programs.
This patch implements lookup by name for programs. The show and dump
commands will return all programs with the given name, whereas other
commands will error out if several programs have the same name.
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Link: https://lore.kernel.org/bpf/b5fc1a5dcfaeb5f16fc80295cdaa606dd2d91534.1576263640.git.paul.chaignon@gmail.com
When several BPF programs have the same tag, bpftool matches only the
first (in ID order). This patch changes that behavior such that dump and
show commands return all matched programs. Commands that require a single
program (e.g., pin and attach) will error out if given a tag that matches
several. bpftool prog dump will also error out if file or visual are
given and several programs have the given tag.
In the case of the dump command, a program header is added before each
dump only if the tag matches several programs; this patch doesn't change
the output if a single program matches. The output when several
programs match thus looks as follows.
$ ./bpftool prog dump xlated tag 6deef7357e7b4530
3: cgroup_skb tag 6deef7357e7b4530 gpl
0: (bf) r6 = r1
[...]
7: (95) exit
4: cgroup_skb tag 6deef7357e7b4530 gpl
0: (bf) r6 = r1
[...]
7: (95) exit
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/fb1fe943202659a69cd21dd5b907c205af1e1e22.1576263640.git.paul.chaignon@gmail.com
This test only works when [1] is applied, which was rejected.
Basically, the errors are reported and cleared. In this particular case of
tls sockets, following reads will block.
The test case was originally submitted with the rejected patch, but, then,
was included as part of a different patchset, possibly by mistake.
[1] https://lore.kernel.org/netdev/20191007035323.4360-2-jakub.kicinski@netronome.com/#t
Thanks Paolo Pisati for pointing out the original patchset where this
appeared.
Fixes: 65190f7742 (selftests/tls: add a test for fragmented messages)
Reported-by: Paolo Pisati <paolo.pisati@canonical.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
The SO_TXTIME test depends on accurate timers. In some virtualized
environments the test has been reported to be flaky. This is easily
reproduced by disabling kvm acceleration in Qemu.
Allow greater variance in a run and retry to further reduce flakiness.
Observed errors are one of two kinds: either the packet arrives too
early or late at recv(), or it was dropped in the qdisc itself and the
recv() call times out.
In the latter case, the qdisc queues a notification to the error
queue of the send socket. Also explicitly report this cause.
Link: https://lore.kernel.org/netdev/CA+FuTSdYOnJCsGuj43xwV1jxvYsaoa_LzHQF9qMyhrkLrivxKw@mail.gmail.com
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Make sure we can pass arbitrary data in wire_len/gso_segs.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191213223028.161282-2-sdf@google.com
The xdp_perf is a dummy XDP test, only used to measure the the cost of
jumping into a naive XDP program one million times.
To build and run the program:
$ cd tools/testing/selftests/bpf
$ make
$ ./test_progs -v -t xdp_perf
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191213175112.30208-6-bjorn.topel@gmail.com
It's quite common on some systems to have more CPUs enlisted as "possible",
than there are (and could ever be) present/online CPUs. In such cases,
perf_buffer creationg will fail due to inability to create perf event on
missing CPU with error like this:
libbpf: failed to open perf buffer event on cpu #16: No such device
This patch fixes the logic of perf_buffer__new() to ignore CPUs that are
missing or currently offline. In rare cases where user explicitly listed
specific CPUs to connect to, behavior is unchanged: libbpf will try to open
perf event buffer on specified CPU(s) anyways.
Fixes: fb84b82246 ("libbpf: add perf buffer API")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191212013609.1691168-1-andriin@fb.com
This logic is re-used for parsing a set of online CPUs. Having it as an
isolated piece of code working with input string makes it conveninent to test
this logic as well. While refactoring, also improve the robustness of original
implementation.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191212013548.1690564-1-andriin@fb.com
The tests were originally written in abort-on-error style. With the switch
to test_progs we can no longer do that. So at the risk of not cleaning up
some resource on failure, we now return to the caller on error.
That said, failure inside one test should not affect others because we run
setup/cleanup before/after every test.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191212102259.418536-11-jakub@cloudflare.com
Do a pure move the show the actual work needed to adapt the tests in
subsequent patch at the cost of breaking test_progs build for the moment.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191212102259.418536-10-jakub@cloudflare.com
Again, prepare for switching reuseport tests to test_progs framework.
test_progs framework will print the subtest name for us if we set it.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191212102259.418536-9-jakub@cloudflare.com
Prepare for switching reuseport tests to test_progs framework, where we
don't have the luxury to terminate the process on failure.
Modify setup helpers to signal failure via the return value with the help
of a macro similar to the one currently in use by the tests.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191212102259.418536-8-jakub@cloudflare.com
Prepare for switching reuseport tests to test_progs framework. Loop over
the tests and perform setup/cleanup for each test separately, remembering
that with test_progs we can select tests to run.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191212102259.418536-7-jakub@cloudflare.com
Prepare for iterating over individual tests without introducing another
nested loop in the main test function.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191212102259.418536-6-jakub@cloudflare.com
Having string arrays to map socket family & type to a name prevents us from
unrolling the test runner loop in the subsequent patch. Introduce helpers
that do the same thing.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191212102259.418536-5-jakub@cloudflare.com
Now that libbpf can recognize SK_REUSEPORT programs, we no longer have to
pass a prog_type hint before loading the object file.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191212102259.418536-3-jakub@cloudflare.com
Allow loading BPF object files that contain SK_REUSEPORT programs without
having to manually set the program type before load if the the section name
is set to "sk_reuseport".
Makes user-space code needed to load SK_REUSEPORT BPF program more concise.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191212102259.418536-2-jakub@cloudflare.com
On ppc64le __u64 and __s64 are defined as long int and unsigned long int,
respectively. This causes compiler to emit warning when %lld/%llu are used to
printf 64-bit numbers. Fix this by casting to size_t/ssize_t with %zu and %zd
format specifiers, respectively.
v1->v2:
- use size_t/ssize_t instead of custom typedefs (Martin).
Fixes: 1f8e2bcb2c ("libbpf: Refactor relocation handling")
Fixes: abd29c9314 ("libbpf: allow specifying map definitions using BTF")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191212171918.638010-1-andriin@fb.com
Add simple test script to execute funciton graph tracer while BPF trampoline
attaches and detaches from the functions being graph traced.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191209000114.1876138-4-ast@kernel.org
On an old perl such as v5.10.1, `kselftest/prefix.pl` gives below error
message:
Can't locate object method "autoflush" via package "IO::Handle" at kselftest/prefix.pl line 10.
This commit fixes the error by explicitly specifying the use of the
`IO::Handle` package.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If a timeout failure occurs, kselftest kills the test process and prints
the timeout log. If the test process has killed while printing a log
that ends with new line, the timeout log can be printed in middle of the
test process output so that it can be seems like a comment, as below:
# test_process_log not ok 3 selftests: timers: nsleep-lat # TIMEOUT
This commit avoids such problem by printing one more line before the
TIMEOUT failure log.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit c78fd76f2b ("selftests: Move kselftest_module.sh into
kselftest/") moved kselftest_module.sh but missed updating a few
references to the path in documentation.
Fixes: c78fd76f2b ("selftests: Move kselftest_module.sh into kselftest/")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Before this patch, perf expected that there might be NPROC*4 unique
cache entries at max, however, it also expected that some of them would
be shared and/or of the same size, thus the final number of entries
would be reduced to be lower than NPROC*4. In case the number of entries
hadn't been reduced (was NPROC*4), the warning was printed.
However, some systems might have unusual cache topology, such as the
following two-processor KVM guest:
cpu level shared_cpu_list size
0 1 0 32K
0 1 0 64K
0 2 0 512K
0 3 0 8192K
1 1 1 32K
1 1 1 64K
1 2 1 512K
1 3 1 8192K
This KVM guest has 8 (NPROC*4) unique cache entries, which used to make
perf printing the message, although there actually aren't "way too many
cpu caches".
v2: Removing unused argument.
v3: Unifying the way we obtain number of cpus.
v4: Removed '& UINT_MAX' construct which is redundant.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 20191208162056.20772-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit f01642e491 ("perf metricgroup: Support multiple events for
metricgroup") introduced support for multiple events in a metric group.
But with the current upstream, metric events names are not printed
properly
In power9 platform:
command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2
1.000208486
2.000368863
2.001400558
Similarly in skylake platform:
command:./perf stat --metric-only -M Power -I 1000
1.000579994
2.002189493
With current upstream version, issue is with event name comparison logic
in find_evsel_group(). Current logic is to compare events belonging to a
metric group to the events in perf_evlist. Since the break statement is
missing in the loop used for comparison between metric group and
perf_evlist events, the loop continues to execute even after getting a
pattern match, and end up in discarding the matches.
Incase of single metric event belongs to metric group, its working fine,
because in case of single event once it compare all events it reaches to
end of perf_evlist.
Example for single metric event in power9 platform:
command:# ./perf stat --metric-only -M branches_per_inst -I 1000 sleep 1
1.000094653 0.2
1.001337059 0.0
This patch fixes the issue by making sure once we found all events
belongs to that metric event matched in find_evsel_group(), we
successfully break from that loop by adding corresponding condition.
With this patch:
In power9 platform:
command:# ./perf stat --metric-only -M translation -C 0 -I 1000 sleep 2
result:#
time derat_4k_miss_rate_percent derat_4k_miss_ratio derat_miss_ratio derat_64k_miss_rate_percent derat_64k_miss_ratio dslb_miss_rate_percent islb_miss_rate_percent
1.000135672 0.0 0.3 1.0 0.0 0.2 0.0 0.0
2.000380617 0.0 0.0 0.0 0.0 0.0 0.0 0.0
command:# ./perf stat --metric-only -M Power -I 1000
Similarly in skylake platform:
result:#
time Turbo_Utilization C3_Core_Residency C6_Core_Residency C7_Core_Residency C2_Pkg_Residency C3_Pkg_Residency C6_Pkg_Residency C7_Pkg_Residency
1.000563580 0.3 0.0 2.6 44.2 21.9 0.0 0.0 0.0
2.002235027 0.4 0.0 2.7 43.0 20.7 0.0 0.0 0.0
Committer testing:
Before:
[root@seventh ~]# perf stat --metric-only -M Power -I 1000
# time
1.000383223
2.001168182
3.001968545
4.002741200
5.003442022
^C 5.777687244
[root@seventh ~]#
After the patch:
[root@seventh ~]# perf stat --metric-only -M Power -I 1000
# time Turbo_Utilization C3_Core_Residency C6_Core_Residency C7_Core_Residency C2_Pkg_Residency C3_Pkg_Residency C6_Pkg_Residency C7_Pkg_Residency
1.000406577 0.4 0.1 1.4 97.0 0.0 0.0 0.0 0.0
2.001481572 0.3 0.0 0.6 97.9 0.0 0.0 0.0 0.0
3.002332585 0.2 0.0 1.0 97.5 0.0 0.0 0.0 0.0
4.003196624 0.2 0.0 0.3 98.6 0.0 0.0 0.0 0.0
5.004063851 0.3 0.0 0.7 97.7 0.0 0.0 0.0 0.0
^C 5.471260276 0.2 0.0 0.5 49.3 0.0 0.0 0.0 0.0
[root@seventh ~]#
[root@seventh ~]# dmesg | grep -i skylake
[ 0.187807] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[root@seventh ~]#
Fixes: f01642e491 ("perf metricgroup: Support multiple events for metricgroup")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191120084059.24458-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kernel Utilization should divide ref cycles spent in kernel with total
ref cycles.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Haiyan Song <haiyanx.song@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191204162121.29998-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf top' stopped working on hw architectures that do not provide a
get_cpuid() implementation and thus fallback to the weak get_cpuid()
default function.
This is done because at annotation time we may need it in the arch
specific annotation init routine, but that is only being used by arches
that do provide a get_cpuid() implementation:
$ find tools/ -name "*.[ch]" | xargs grep 'evlist->env'
tools/perf/builtin-top.c: top.evlist->env = &perf_env;
tools/perf/util/evsel.c: return evsel->evlist->env;
tools/perf/util/s390-cpumsf.c: sf->machine_type = s390_cpumsf_get_type(session->evlist->env->cpuid);
tools/perf/util/header.c: session->evlist->env = &header->env;
tools/perf/util/sample-raw.c: const char *arch_pf = perf_env__arch(evlist->env);
$
$ find tools/perf/arch -name "*.[ch]" | xargs grep -w get_cpuid
tools/perf/arch/x86/util/auxtrace.c: ret = get_cpuid(buffer, sizeof(buffer));
tools/perf/arch/x86/util/header.c:get_cpuid(char *buffer, size_t sz)
tools/perf/arch/powerpc/util/header.c:get_cpuid(char *buffer, size_t sz)
tools/perf/arch/s390/util/header.c: * Implementation of get_cpuid().
tools/perf/arch/s390/util/header.c:int get_cpuid(char *buffer, size_t sz)
tools/perf/arch/s390/util/header.c: if (buf && get_cpuid(buf, 128))
$
For 'report' or 'script', i.e. tools working on perf.data files, that is
setup while reading the header, its just top that needs to explicitely
read it at tool start.
Fixes: 608127f737 ("perf top: Initialize perf_env->cpuid, needed by the per arch annotation init routine")
Reported-by: John Garry <john.garry@huawei.com>
Analysed-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: John Garry <john.garry@huawei.com> # arm64
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-lxwjr0cd2eggzx04a780ffrv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some of the functions calling get_cpuid() propagate back the error it
returns, and all are using errno (positive) values, make the weak
default get_cpuid() function return ENOSYS to be consistent and to allow
checking if this is an arch not providing this function or if a provided
one is having trouble getting the cpuid, to decide if the warning should
be provided to the user or just a debug message should be emitted.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: John Garry <john.garry@huawei.com> # arm64
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-lxwjr0cd2eggzx04a780ffrv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New development cycles starts, bump to v0.0.7 proactively.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191209224022.3544519-1-andriin@fb.com
To pick up the changes from:
22945688ac ("KVM: PPC: Book3S HV: Support reset of secure guest")
No tools changes are caused by this, as the only defines so far used
from these files are for syscall arg pretty printing are:
$ grep KVM tools/perf/trace/beauty/*.sh
tools/perf/trace/beauty/kvm_ioctl.sh:regex='^#[[:space:]]*define[[:space:]]+KVM_(\w+)[[:space:]]+_IO[RW]*\([[:space:]]*KVMIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*'
$
This addresses these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Link: https://lkml.kernel.org/n/tip-bdbe4x02johhul05a03o27zj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up BPF fixes to allow a clean 'make -C tools/perf build-test':
7c3977d1e8 libbpf: Fix sym->st_value print on 32-bit arches
1fd450f992 libbpf: Fix up generation of bpf_helper_defs.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the kptr_restrict sysctl is set, the kernel can fail to return
jited_ksyms or jited_prog_insns, but still have positive values in
nr_jited_ksyms and jited_prog_len. This causes bpftool to crash when
trying to dump the program because it only checks the len fields not
the actual pointers to the instructions and ksyms.
Fix this by adding the missing checks.
Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Fixes: f84192ee00 ("tools: bpftool: resolve calls without using imm field")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191210181412.151226-1-toke@redhat.com
Add very trivial allocation and import test for dma-heaps,
utilizing the vgem driver as a test importer.
A good chunk of this code taken from:
tools/testing/selftests/android/ion/ionmap_test.c
Originally by Laura Abbott <labbott@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Vincent Donnefort <Vincent.Donnefort@arm.com>
Cc: Sudipto Paul <Sudipto.Paul@arm.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Alistair Strachan <astrachan@google.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Sandeep Patil <sspatil@android.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Tested-by: Ayan Kumar Halder <ayan.halder@arm.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203172641.66642-6-john.stultz@linaro.org
the following command currently fails:
[root@fedora tc-testing]# ./tdc.py -l
The following test case IDs are not unique:
{'6f5e'}
Please correct them before continuing.
this happens because there are two tests having the same id:
[root@fedora tc-testing]# grep -r 6f5e tc-tests/*
tc-tests/actions/pedit.json: "id": "6f5e",
tc-tests/filters/basic.json: "id": "6f5e",
fix it replacing the latest duplicate id with a brand new one:
[root@fedora tc-testing]# sed -i 's/6f5e//1' tc-tests/filters/basic.json
[root@fedora tc-testing]# ./tdc.py -i
Fixes: 4717b05328 ("tc-testing: Introduced tdc tests for basic filter")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Wait for rcu grace period after releasing netns in ctnetlink,
from Florian Westphal.
2) Incorrect command type in flowtable offload ndo invocation,
from wenxu.
3) Incorrect callback type in flowtable offload flow tuple
updates, also from wenxu.
4) Fix compile warning on flowtable offload infrastructure due to
possible reference to uninitialized variable, from Nathan Chancellor.
5) Do not inline nf_ct_resolve_clash(), this is called from slow
path / stress situations. From Florian Westphal.
6) Missing IPv6 flow selector description in flowtable offload.
7) Missing check for NETDEV_UNREGISTER in nf_tables offload
infrastructure, from wenxu.
8) Update NAT selftest to use randomized netns names, from
Florian Westphal.
9) Restore nfqueue bridge support, from Marco Oliverio.
10) Compilation warning in SCTP_CHUNKMAP_*() on xt_sctp header.
From Phil Sutter.
11) Fix bogus lookup/get match for non-anonymous rbtree sets.
12) Missing netlink validation for NFT_SET_ELEM_INTERVAL_END
elements.
13) Missing netlink validation for NFT_DATA_VALUE after
nft_data_init().
14) If rule specifies no actions, offload infrastructure returns
EOPNOTSUPP.
15) Module refcount leak in object updates.
16) Missing sanitization for ARP traffic from br_netfilter, from
Eric Dumazet.
17) Compilation breakage on big-endian due to incorrect memcpy()
size in the flowtable offload infrastructure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On some kernels, concurrent calls to the lscpu command result in severe
slowdowns. For example, on v4.16, a single lscpu invocation takes about
two milliseconds, four concurrent invocations more than two seconds,
and 16 concurrent invocations more than 20 seconds. Given that the only
goal is to learn the number of CPUs, invoking lscpu but once suffices.
This commit therefore invokes lscpu early in kvm.sh execution, setting
the initial value of the TORTURE_ALLOTED_CPUS environment variable.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
On a large system, it can be convenient to tell rcutorture to run
several instances of the default scenarios. Currently, this requires
explicitly listing them, for example, "--configs '2*SRCU-N 2*SRCU-P...'".
Although this works, it is rather inconvenient.
This commit therefore allows "CFLIST" to be specified to indicate the
default list of scenarios called out in the relevant CFLIST file, for
example, for RCU, tools/testing/selftests/rcutorture/configs/rcu/CFLIST.
In addition, multipliers may be used to run multiple instances of all
the scenarios. For example, on a 256-CPU system, "--configs '3*CFLIST'"
would run three instances of each scenario concurrently with one CPU
left over. Thus "--configs '3*CFLIST TINY01'" would exactly consume all
256 CPUs, which makes rcutorture's jitter feature more effective.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds the worst-case results from any call_rcu()
forward-progress tests to the rcutorture test-summary output.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcutorture scripting uses the mpstat command to determine how much
the system is being used, and adjusts make's -j argument accordingly.
However, mpstat isn't installed by default, so it would be good if the
scripting does something useful when mpstat isn't present.
This commit therefore makes the scripts assumes that if mpstat is not
present, they are free to use all the CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, jitter.sh assumes that the underlying hypervisor will be
configured with all CPUs hotpluggable, with the possible exception
of CPU 0. However, there are installations where the hypervisor
prohibits offlining, which breaks jitter.sh. This commit therefore
lists the CPUs that cannot be offlined up front, and checks for the
case where no CPU can be offlined in the loop.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The dracut scripting does not work on all platforms, and there are no
known failures from the init binary based on the statically linked C
program. This commit therefore removes the dracut scripting so that the
statically linked C program is always used to create the init "script".
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In many environments, gawk provides systime(), but awk doesn't.
This commit therefore changes awk scripts using systime() to instead be
gawk scripts.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Assert in test_run_timeout was not updated with the build_dir argument
and caused the following error:
AssertionError: Expected call: run_kernel(timeout=3453)
Actual call: run_kernel(build_dir=None, timeout=3453)
Needed to update kunit_tool_test to reflect this fix
https://lkml.org/lkml/2019/9/6/351
Signed-off-by: Heidi Fahim <heidifahim@google.com>
Reviewed-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When creating the second host in h2_create(), two addresses are assigned
to the interface, but only one is deleted. When running the test twice
in a row the following error is observed:
$ ./router_bridge_vlan.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
TEST: vlan [ OK ]
$ ./router_bridge_vlan.sh
RTNETLINK answers: File exists
TEST: ping [ OK ]
TEST: ping6 [ OK ]
TEST: vlan [ OK ]
Fix this by deleting the address during cleanup.
Fixes: 5b1e7f9ebd ("selftests: forwarding: Test routed bridge interface")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix Makefile to set safesetid-test.sh to TEST_PROGS instead
of non existing run_tests.sh.
Without this fix, I got following error.
----
TAP version 13
1..1
# selftests: safesetid: run_tests.sh
# Warning: file run_tests.sh is missing!
not ok 1 selftests: safesetid: run_tests.sh
----
Fixes: c67e8ec03f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Check the return value of setuid() and setgid().
This fixes the following warnings and improves test result.
safesetid-test.c: In function ‘main’:
safesetid-test.c:294:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
setuid(NO_POLICY_USER);
^~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:295:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result]
setgid(NO_POLICY_USER);
^~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:309:2: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
setuid(RESTRICTED_PARENT);
^~~~~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c:310:2: warning: ignoring return value of ‘setgid’, declared with attribute warn_unused_result [-Wunused-result]
setgid(RESTRICTED_PARENT);
^~~~~~~~~~~~~~~~~~~~~~~~~
safesetid-test.c: In function ‘test_setuid’:
safesetid-test.c:216:3: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
setuid(child_uid);
^~~~~~~~~~~~~~~~~
Fixes: c67e8ec03f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Move -lcap to LDLIBS from CFLAGS because it is a library
to be linked.
Without this, safesetid failed to build with link error
as below.
----
/usr/bin/ld: /tmp/ccL8rZHT.o: in function `drop_caps':
safesetid-test.c:(.text+0xe7): undefined reference to `cap_get_proc'
/usr/bin/ld: safesetid-test.c:(.text+0x107): undefined reference to `cap_set_flag'
/usr/bin/ld: safesetid-test.c:(.text+0x10f): undefined reference to `cap_set_proc'
/usr/bin/ld: safesetid-test.c:(.text+0x117): undefined reference to `cap_free'
/usr/bin/ld: safesetid-test.c:(.text+0x136): undefined reference to `cap_clear'
collect2: error: ld returned 1 exit status
----
Fixes: c67e8ec03f ("LSM: SafeSetID: add selftest")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix multiple kprobe event testcase to work it correctly.
There are 2 bugfixes.
- Since `wc -l FILE` returns not only line number but also
FILE filename, following "if" statement always failed.
Fix this bug by replacing it with 'cat FILE | wc -l'
- Since "while do-done loop" block with pipeline becomes a
subshell, $N local variable is not update outside of
the loop.
Fix this bug by using actual target number (256) instead
of $N.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use relative path to trigger file instead of absolute debugfs path,
because if the user uses tracefs instead of debugfs, it can be
mounted at /sys/kernel/tracing.
Anyway, since the ftracetest is designed to be run at the tracing
directory, user doesn't need to use absolute path.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since dynamic function tracer can be disabled, set_ftrace_filter
can be disappeared. Test cases which depends on it, must check
whether the set_ftrace_filter exists or not before testing
and if not, return as unsupported.
Also, if the function tracer itself is disabled, we can not
set "function" to current_tracer. Test cases must check it
before testing, and return as unsupported.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If we run ftracetest on the kernel with CONFIG_DYNAMIC_FTRACE=n,
there is no set_ftrace_filter and all test cases are failed, because
reset_ftrace_filter() returns an error.
Let's check whether set_ftrace_filter exists in reset_ftrace_filter()
and clean up only set_ftrace_notrace in initialize_ftrace().
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
WireGuard is a layer 3 secure networking tunnel made specifically for
the kernel, that aims to be much simpler and easier to audit than IPsec.
Extensive documentation and description of the protocol and
considerations, along with formal proofs of the cryptography, are
available at:
* https://www.wireguard.com/
* https://www.wireguard.com/papers/wireguard.pdf
This commit implements WireGuard as a simple network device driver,
accessible in the usual RTNL way used by virtual network drivers. It
makes use of the udp_tunnel APIs, GRO, GSO, NAPI, and the usual set of
networking subsystem APIs. It has a somewhat novel multicore queueing
system designed for maximum throughput and minimal latency of encryption
operations, but it is implemented modestly using workqueues and NAPI.
Configuration is done via generic Netlink, and following a review from
the Netlink maintainer a year ago, several high profile userspace tools
have already implemented the API.
This commit also comes with several different tests, both in-kernel
tests and out-of-kernel tests based on network namespaces, taking profit
of the fact that sockets used by WireGuard intentionally stay in the
namespace the WireGuard interface was originally created, exactly like
the semantics of userspace tun devices. See wireguard.com/netns/ for
pictures and examples.
The source code is fairly short, but rather than combining everything
into a single file, WireGuard is developed as cleanly separable files,
making auditing and comprehension easier. Things are laid out as
follows:
* noise.[ch], cookie.[ch], messages.h: These implement the bulk of the
cryptographic aspects of the protocol, and are mostly data-only in
nature, taking in buffers of bytes and spitting out buffers of
bytes. They also handle reference counting for their various shared
pieces of data, like keys and key lists.
* ratelimiter.[ch]: Used as an integral part of cookie.[ch] for
ratelimiting certain types of cryptographic operations in accordance
with particular WireGuard semantics.
* allowedips.[ch], peerlookup.[ch]: The main lookup structures of
WireGuard, the former being trie-like with particular semantics, an
integral part of the design of the protocol, and the latter just
being nice helper functions around the various hashtables we use.
* device.[ch]: Implementation of functions for the netdevice and for
rtnl, responsible for maintaining the life of a given interface and
wiring it up to the rest of WireGuard.
* peer.[ch]: Each interface has a list of peers, with helper functions
available here for creation, destruction, and reference counting.
* socket.[ch]: Implementation of functions related to udp_socket and
the general set of kernel socket APIs, for sending and receiving
ciphertext UDP packets, and taking care of WireGuard-specific sticky
socket routing semantics for the automatic roaming.
* netlink.[ch]: Userspace API entry point for configuring WireGuard
peers and devices. The API has been implemented by several userspace
tools and network management utility, and the WireGuard project
distributes the basic wg(8) tool.
* queueing.[ch]: Shared function on the rx and tx path for handling
the various queues used in the multicore algorithms.
* send.c: Handles encrypting outgoing packets in parallel on
multiple cores, before sending them in order on a single core, via
workqueues and ring buffers. Also handles sending handshake and cookie
messages as part of the protocol, in parallel.
* receive.c: Handles decrypting incoming packets in parallel on
multiple cores, before passing them off in order to be ingested via
the rest of the networking subsystem with GRO via the typical NAPI
poll function. Also handles receiving handshake and cookie messages
as part of the protocol, in parallel.
* timers.[ch]: Uses the timer wheel to implement protocol particular
event timeouts, and gives a set of very simple event-driven entry
point functions for callers.
* main.c, version.h: Initialization and deinitialization of the module.
* selftest/*.h: Runtime unit tests for some of the most security
sensitive functions.
* tools/testing/selftests/wireguard/netns.sh: Aforementioned testing
script using network namespaces.
This commit aims to be as self-contained as possible, implementing
WireGuard as a standalone module not needing much special handling or
coordination from the network subsystem. I expect for future
optimizations to the network stack to positively improve WireGuard, and
vice-versa, but for the time being, this exists as intentionally
standalone.
We introduce a menu option for CONFIG_WIREGUARD, as well as providing a
verbose debug log and self-tests via CONFIG_WIREGUARD_DEBUG.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: David Miller <davem@davemloft.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) More jumbo frame fixes in r8169, from Heiner Kallweit.
2) Fix bpf build in minimal configuration, from Alexei Starovoitov.
3) Use after free in slcan driver, from Jouni Hogander.
4) Flower classifier port ranges don't work properly in the HW offload
case, from Yoshiki Komachi.
5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin.
6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk.
7) Fix flow dissection in dsa TX path, from Alexander Lobakin.
8) Stale syncookie timestampe fixes from Guillaume Nault.
[ Did an evil merge to silence a warning introduced by this pull - Linus ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
r8169: fix rtl_hw_jumbo_disable for RTL8168evl
net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()
r8169: add missing RX enabling for WoL on RTL8125
vhost/vsock: accept only packets with the right dst_cid
net: phy: dp83867: fix hfs boot in rgmii mode
net: ethernet: ti: cpsw: fix extra rx interrupt
inet: protect against too small mtu values.
gre: refetch erspan header from skb->data after pskb_may_pull()
pppoe: remove redundant BUG_ON() check in pppoe_pernet
tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
tcp: tighten acceptance of ACKs not matching a child socket
tcp: fix rejected syncookies due to stale timestamps
lpc_eth: kernel BUG on remove
tcp: md5: fix potential overestimation of TCP option space
net: sched: allow indirect blocks to bind to clsact in TC
net: core: rename indirect block ingress cb function
net-sysfs: Call dev_hold always in netdev_queue_add_kobject
net: dsa: fix flow dissection on Tx path
net/tls: Fix return values to avoid ENOTSUPP
net: avoid an indirect call in ____sys_recvmsg()
...
Using ns0, ns1, etc. isn't a good idea, they might exist already.
Use a random suffix.
Also, older nft versions don't support "-" as alias for stdin, so
use /dev/stdin instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ENOTSUPP is not available in userspace, for example:
setsockopt failed, 524, Unknown error 524
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing fexit_bpf2bpf test covers the target progrm with callees.
This patch added a test for the target program without callees.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191205010607.177904-1-yhs@fb.com
This adds the promised selftest for epoll. It will verify the wakeups
of epoll. Including leaf and nested mode, epoll_wait() and poll() and
multi-threads.
Link: http://lkml.kernel.org/r/20191009121518.4027-1-r@hev.cc
Signed-off-by: hev <r@hev.cc>
Reviewed-by: Roman Penyaev <rpenyaev@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It looks like BPF program that handles BPF_SOCK_OPS_STATE_CB state
can race with the bpf_map_lookup_elem("global_map"); I sometimes
see the failures in this test and re-running helps.
Since we know that we expect the callback to be called 3 times (one
time for listener socket, two times for both ends of the connection),
let's export this number and add simple retry logic around that.
Also, let's make EXPECT_EQ() not return on failure, but continue
evaluating all conditions; that should make potential debugging
easier.
With this fix in place I don't observe the flakiness anymore.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Lawrence Brakmo <brakmo@fb.com>
Link: https://lore.kernel.org/bpf/20191204190955.170934-1-sdf@google.com
Commit 5c26f9a783 ("libbpf: Don't use cxx to test_libpf target")
converted existing c++ test to c. We still want to include and
link against libbpf from c++ code, so reinstate this test back,
this time in a form of a selftest with a clear comment about
its purpose.
v2:
* -lelf -> $(LDLIBS) (Andrii Nakryiko)
Fixes: 5c26f9a783 ("libbpf: Don't use cxx to test_libpf target")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191202215931.248178-1-sdf@google.com
Commit 40430452fd ("kernfs: use 64bit inos if ino_t is 64bit") changed
the way cgroup ids are exposed to the userspace. Instead of assuming
fixed root id, let's query it.
Fixes: 40430452fd ("kernfs: use 64bit inos if ino_t is 64bit")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191202200143.250793-1-sdf@google.com
Picking the changes from:
2093dea3de ("drm/syncobj: extend syncobj query ability v3")
Which doesn't affect tooling, just silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-t1xqmjffo4rxdw395dsnu34j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the change in:
a0e047156c ("drm/i915/gem: Make context persistence optional")
9cd20ef780 ("drm/i915/perf: allow holding preemption on filtered ctx")
7831e9a965 ("drm/i915/perf: Allow dynamic reconfiguration of the OA stream")
4f6ccc74a8 ("drm/i915: add support for perf configuration queries")
b8d49f28aa ("drm/i915/perf: introduce a versioning of the i915-perf uapi")
601734f7aa ("drm/i915/tgl: s/ss/eu fuse reading support")
That don't result in any changes in tooling, just silences this perf
build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-qwzjrgwj55y3g6rjdf9spkpr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ID index event is used when decoding, but can result in the
following error:
$ perf record --aux-sample -e '{intel_pt//,branch-misses}:u' ls
$ perf inject -i perf.data -o perf.data.inj --itrace=be
$ perf script -i perf.data.inj
0x1020 [0x410]: failed to process type: 69 [No such file or directory]
Fix by having 'perf inject' drop the ID index event.
Fixes: c0a6de06c4 ("perf record: Add support for AUX area sampling")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191204120800.8138-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If perf.data is recorded without -d, don't allow user to use --mem-mode
with 'perf report'. symbol_daddr and phys_daddr can be recorded
separately and may be present in the perf.data but at the report time
they are associated with mem-mode fields and thus this restriction
applies to them as well.
Before:
$ perf record ls
$ perf report --mem-mode --stdio
# Overhead Local Weight Memory access Symbol
# ........ ............ ............. .......................
55.56% 0 N/A [k] 0xffffffff81a00ae7
After:
$ perf report --mem-mode --stdio
Error:
Selected --mem-mode but no mem data. Did you call perf record without -d?
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191114132213.5419-4-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently -F allows branch-mode / mem-mode fields with -F even
when perf report is not running in that mode. Don't allow that.
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191114132213.5419-3-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
pr_err() in TUI mode does not print anyting on the screen and just
quits.
Replace such pr_err() with ui__error().
Before:
$ perf report -s +
$
After:
$ perf report -s +
┌─Error:────────────────┐
│Invalid --sort key: `+'│
│ │
│Press any key... │
└───────────────────────┘
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191114132213.5419-2-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf report/top:
- Fix segfault due to missing initialization of recently introduced
struct map_symbol 'maps' field in append_inlines(), when running
with DWARF callchains.
perf stat:
Andi Kleen:
- Affinity based optimizations for sessions with many events in
machines with large core counts, avoiding excessive number of IPIs.
libtraceevent:
- Sudip Mukherjee:
- Fix installation with O=.
- Copy pkg-config file to output folder when using O=.
perf bench:
Arnaldo Carvalho de Melo:
- Update the copies of x86's mem{cpy,set}_64.S, and because that
now uses new stuff in linux/linkage.h, update that header too, which
made the minimal clang version to build perf to be 3.5, as
3.4 as found in some of the container images used to test build perf
can't grok STT_FUNC as a token in .type lines.
ABI headers:
Arnaldo Carvalho de Melo:
- Sync x86's msr-index.h copy with the kernel sources, resulting
in new MSRs to be usable in filter expressions in 'perf trace',
such as IA32_TSX_CTRL.
- Sync linux/fscrypt.h, linux/stat.h, sched.h and the kvm headers.
perf trace:
Arnaldo Carvalho de Melo:
- Add CLEAR_SIGHAND support for clone's flags arg
perf kvm:
Arnaldo Carvalho de Melo:
- Clarify the 'perf kvm' -i and -o command line options
perf test:
Ian Rogers:
- Move test functionality in to a 'perf test' entry.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXeZkaAAKCRCyPKLppCJ+
J5LeAQCh4Pprux9b7uqkORMzOdur2+RbrQgHr2pSKno0Or/ojAD/dR/i8wUd/fYf
j9lKGGDCvrfNxzrg0opbymNljveacg0=
=RxjG
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.5-20191203' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf report/top:
- Fix segfault due to missing initialization of recently introduced
struct map_symbol 'maps' field in append_inlines(), when running
with DWARF callchains.
perf stat:
Andi Kleen:
- Affinity based optimizations for sessions with many events in
machines with large core counts, avoiding excessive number of IPIs.
libtraceevent:
- Sudip Mukherjee:
- Fix installation with O=.
- Copy pkg-config file to output folder when using O=.
perf bench:
Arnaldo Carvalho de Melo:
- Update the copies of x86's mem{cpy,set}_64.S, and because that
now uses new stuff in linux/linkage.h, update that header too, which
made the minimal clang version to build perf to be 3.5, as
3.4 as found in some of the container images used to test build perf
can't grok STT_FUNC as a token in .type lines.
ABI headers:
Arnaldo Carvalho de Melo:
- Sync x86's msr-index.h copy with the kernel sources, resulting
in new MSRs to be usable in filter expressions in 'perf trace',
such as IA32_TSX_CTRL.
- Sync linux/fscrypt.h, linux/stat.h, sched.h and the kvm headers.
perf trace:
Arnaldo Carvalho de Melo:
- Add CLEAR_SIGHAND support for clone's flags arg
perf kvm:
Arnaldo Carvalho de Melo:
- Clarify the 'perf kvm' -i and -o command line options
perf test:
Ian Rogers:
- Move test functionality in to a 'perf test' entry.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl3leXUUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vyY3g/9FAVVdPEaadNtAhQ/zIxcjozDovKq
0q7yOA3aTBTUoNEinm88an6p0dcC4gNKtGukXmzVH2Hhxm9kLRdtpZGYY00tpLUB
9rI7XsgwwHa+hLwsHbIs507sKGFGy5FLr0ChTTGLDEMppnEvjA2hZooYmcB/OgrC
LlFcwbNKGOk/Si9u2bF2nLO0JDoVHnwzpF99saew/nqc7Lfj9e9IPZFom+VjPBUh
AOvRp2H7uBN+WQlpLeFeMDDoeXh34lX0kYqIV/cVkXVnknDGYKV2CBTg2aeX7jd0
QiPHZh6zlW8zNQgaCZRiBAbatVEOnRMRJ++yiqB8hBYp1LMXm6kJ01YSQpXkugoY
Vp9dtzzTARWV/XkKwD4brw9ZEmIDnO+Ed2x2VbUkPJVcXAvzSQWAx82IU0Iuqmcb
9qr6U2Zf/Xk5aFlGPYVH8QOG+QqzIbZNRQ7NlhDlITyW4P6QPu0mw374yYP2wDGL
sP5YSS3YGa0sQcEgDtVnd4z+WTZI4AwXLPaeaLkDhdfHp2FsERUY4TrPs33J99xw
og4EyokVFzjYzlnBPU6WWn7LL+jj5ccXkL3MA4DR4FJOnNGHh7NXfQUH56rrgsq7
F9/8shL5DuTbQkde1uSyUG9Iq/RigVLlV5DQavFm3dSXvZi0E16t5alC5URNTzk7
at8Bogn53QhlmYc=
=uUXw
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Warn if a host bridge has no NUMA info (Yunsheng Lin)
- Add PCI_STD_NUM_BARS for the number of standard BARs (Denis
Efremov)
Resource management:
- Fix boot-time Embedded Controller GPE storm caused by incorrect
resource assignment after ACPI Bus Check Notification (Mika
Westerberg)
- Protect pci_reassign_bridge_resources() against concurrent
addition/removal (Benjamin Herrenschmidt)
- Fix bridge dma_ranges resource list cleanup (Rob Herring)
- Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control
the MMIO and prefetchable MMIO window sizes of hotplug bridges
independently (Nicholas Johnson)
- Fix MMIO/MMIO_PREF window assignment that assigned more space than
desired (Nicholas Johnson)
- Only enforce bus numbers from bridge EA if the bridge has EA
devices downstream (Subbaraya Sundeep)
- Consolidate DT "dma-ranges" parsing and convert all host drivers to
use shared parsing (Rob Herring)
Error reporting:
- Restore AER capability after resume (Mayurkumar Patel)
- Add PoisonTLPBlocked AER counter (Rajat Jain)
- Use for_each_set_bit() to simplify AER code (Andy Shevchenko)
- Fix AER kernel-doc (Andy Shevchenko)
- Add "pcie_ports=dpc-native" parameter to allow native use of DPC
even if platform didn't grant control over AER (Olof Johansson)
Hotplug:
- Avoid returning prematurely from sysfs requests to enable or
disable a PCIe hotplug slot (Lukas Wunner)
- Don't disable interrupts twice when suspending hotplug ports (Mika
Westerberg)
- Fix deadlocks when PCIe ports are hot-removed while suspended (Mika
Westerberg)
Power management:
- Remove unnecessary ASPM locking (Bjorn Helgaas)
- Add support for disabling L1 PM Substates (Heiner Kallweit)
- Allow re-enabling Clock PM after it has been disabled (Heiner
Kallweit)
- Add sysfs attributes for controlling ASPM link states (Heiner
Kallweit)
- Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl"
sysfs files (Heiner Kallweit)
- Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on
USB 2.0 or 1.1 connect events (Kai-Heng Feng)
- Move power state check out of pci_msi_supported() (Bjorn Helgaas)
- Fix incorrect MSI-X masking on resume and revert related nvme quirk
for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan)
- Always return devices to D0 when thawing to fix hibernation with
drivers like mlx4 that used legacy power management (previously we
only did it for drivers with new power management ops) (Dexuan Cui)
- Clear PCIe PME Status even for legacy power management (Bjorn
Helgaas)
- Fix PCI PM documentation errors (Bjorn Helgaas)
- Use dev_printk() for more power management messages (Bjorn Helgaas)
- Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas)
- Convert xen-platform from legacy to generic power management (Bjorn
Helgaas)
- Removed unused .resume_early() and .suspend_late() legacy power
management hooks (Bjorn Helgaas)
- Rearrange power management code for clarity (Rafael J. Wysocki)
- Decode power states more clearly ("4" or "D4" really refers to
"D3cold") (Bjorn Helgaas)
- Notice when reading PM Control register returns an error (~0)
instead of interpreting it as being in D3hot (Bjorn Helgaas)
- Add missing link delays required by the PCIe spec (Mika Westerberg)
Virtualization:
- Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn
Helgaas)
- Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
previously didn't recognize that) (Kuppuswamy Sathyanarayanan)
- Allow VFs to use PASID (the PF PASID capability is shared by the
VFs, but the code previously didn't recognize that) (Kuppuswamy
Sathyanarayanan)
- Disconnect PF and VF ATS enablement, since ATS in PFs and
associated VFs can be enabled independently (Kuppuswamy
Sathyanarayanan)
- Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)
- Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)
- Consolidate ATS declarations in linux/pci-ats.h (Krzysztof
Wilczynski)
- Remove unused PRI and PASID stubs (Bjorn Helgaas)
- Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
interfaces that are only used by built-in IOMMU drivers (Bjorn
Helgaas)
- Hide PRI and PASID state restoration functions used only inside the
PCI core (Bjorn Helgaas)
- Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)
- Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)
- Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George
Cherian)
- Fix the UPDCR register address in the Intel ACS quirk (Steffen
Liebergeld)
- Unify ACS quirk implementations (Bjorn Helgaas)
Amlogic Meson host bridge driver:
- Fix meson PERST# GPIO polarity problem (Remi Pommarel)
- Add DT bindings for Amlogic Meson G12A (Neil Armstrong)
- Fix meson clock names to match DT bindings (Neil Armstrong)
- Add meson support for Amlogic G12A SoC with separate shared PHY
(Neil Armstrong)
- Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe
combo PHY (Neil Armstrong)
- Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong)
- Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT
(Neil Armstrong)
Broadcom iProc host bridge driver:
- Invalidate iProc PAXB address mapping before programming it
(Abhishek Shah)
- Fix iproc-msi and mvebu __iomem annotations (Ben Dooks)
Cadence host bridge driver:
- Refactor Cadence PCIe host controller to use as a library for both
host and endpoint (Tom Joseph)
Freescale Layerscape host bridge driver:
- Add layerscape LS1028a support (Xiaowei Bao)
Intel VMD host bridge driver:
- Add VMD bus 224-255 restriction decode (Jon Derrick)
- Add VMD 8086:9A0B device ID (Jon Derrick)
- Remove Keith from VMD maintainer list (Keith Busch)
Marvell ARMADA 3700 / Aardvark host bridge driver:
- Use LTSSM state to build link training flag since Aardvark doesn't
implement the Link Training bit (Remi Pommarel)
- Delay before training Aardvark link in case PERST# was asserted
before the driver probe (Remi Pommarel)
- Fix Aardvark issues with Root Control reads and writes (Remi
Pommarel)
- Don't rely on jiffies in Aardvark config access path since
interrupts may be disabled (Remi Pommarel)
- Fix Aardvark big-endian support (Grzegorz Jaszczyk)
Marvell ARMADA 370 / XP host bridge driver:
- Make mvebu_pci_bridge_emul_ops static (Ben Dooks)
Microsoft Hyper-V host bridge driver:
- Add hibernation support for Hyper-V virtual PCI devices (Dexuan
Cui)
- Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan
Cui)
- Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui)
Mobiveil host bridge driver:
- Change mobiveil csr_read()/write() function names that conflict
with riscv arch functions (Kefeng Wang)
NVIDIA Tegra host bridge driver:
- Fix Tegra CLKREQ dependency programming (Vidya Sagar)
Renesas R-Car host bridge driver:
- Remove unnecessary header include from rcar (Andrew Murray)
- Tighten register index checking for rcar inbound range programming
(Marek Vasut)
- Fix rcar inbound range alignment calculation to improve packing of
multiple entries (Marek Vasut)
- Update rcar MACCTLR setting to match documentation (Yoshihiro
Shimoda)
- Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual
(Yoshihiro Shimoda)
- Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon
Horman)
Rockchip host bridge driver:
- Make rockchip 0V9 and 1V8 power regulators non-optional (Robin
Murphy)
Socionext UniPhier host bridge driver:
- Set uniphier to host (RC) mode always (Kunihiko Hayashi)
Endpoint drivers:
- Fix endpoint driver sign extension problem when shifting page
number to phys_addr_t (Alan Mikhak)
Misc:
- Add NumaChip SPDX header (Krzysztof Wilczynski)
- Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski)
- Remove unused includes (Krzysztof Wilczynski)
- Removed unused sysfs attribute groups (Ben Dooks)
- Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas)
- Add PCIe Link Control 2 register field definitions to replace magic
numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas)
- Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and
Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas)
- Use pcie_capability_read_word() instead of pci_read_config_word()
in AMDGPU and Radeon CIK/SI (Frederick Lawler)
- Remove unused pci_irq_get_node() Greg Kroah-Hartman)
- Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig
(Palmer Dabbelt, Michal Simek)
- Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe)
- Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
Helgaas)
- Fix bridge emulation big-endian support (Grzegorz Jaszczyk)
- Fix dwc find_next_bit() usage (Niklas Cassel)
- Fix pcitest.c fd leak (Hewenliang)
- Fix typos and comments (Bjorn Helgaas)
- Fix Kconfig whitespace errors (Krzysztof Kozlowski)"
* tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits)
PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist
asm-generic: Make msi.h a mandatory include/asm header
Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T"
PCI/MSI: Fix incorrect MSI-X masking on resume
PCI/MSI: Move power state check out of pci_msi_supported()
PCI/MSI: Remove unused pci_irq_get_node()
PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer
PCI: hv: Change pci_protocol_version to per-hbus
PCI: hv: Add hibernation support
PCI: hv: Reorganize the code in preparation of hibernation
MAINTAINERS: Remove Keith from VMD maintainer
PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code
PCI/ASPM: Add sysfs attributes for controlling ASPM link states
PCI: Fix indentation
drm/radeon: Prefer pcie_capability_read_word()
drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions
drm/radeon: Correct Transmit Margin masks
drm/amdgpu: Prefer pcie_capability_read_word()
PCI: uniphier: Set mode register to host mode
drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions
...
This second Kselftest fixes update for Linux 5.5-rc1 consists of
an urgent revert to fix regression in CI coverage.
-----BEGIN PGP SIGNATURE-----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=tLA/
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.5-rc1-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull more kselftest fixes from Shuah Khan:
"This second Kselftest fixes update for Linux 5.5-rc1 consists of an
urgent revert to fix regression in CI coverage"
* tag 'linux-kselftest-5.5-rc1-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Revert "selftests: Fix O= and KBUILD_OUTPUT handling for relative paths"
When we use 'O=' with make to build libtraceevent in a separate folder
it still copies 'libtraceevent.pc' to its source folder. Modify the
Makefile so that it uses the output folder to copy the pkg-config file
and install from there.
Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191115113610.21493-2-sudipm.mukherjee@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we use 'O=' with make to build libtraceevent in a separate folder
it fails to install libtraceevent.a and libtraceevent.so.1.1.0 with the
error:
INSTALL /home/sudip/linux/obj-trace/libtraceevent.a
INSTALL /home/sudip/linux/obj-trace/libtraceevent.so.1.1.0
cp: cannot stat 'libtraceevent.a': No such file or directory
Makefile:225: recipe for target 'install_lib' failed
make: *** [install_lib] Error 1
I used the command:
make O=../../../obj-trace DESTDIR=~/test prefix==/usr install
It turns out libtraceevent Makefile, even though it builds in a separate
folder, searches for libtraceevent.a and libtraceevent.so.1.1.0 in its
source folder.
So, add the 'OUTPUT' prefix to the source path so that 'make' looks for
the files in the correct place.
Signed-off-by: Sudipm Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191115113610.21493-1-sudipm.mukherjee@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf 2019-12-02
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 6 day(s) which contain
a total of 10 files changed, 60 insertions(+), 51 deletions(-).
The main changes are:
1) Fix vmlinux BTF generation for binutils pre v2.25, from Stanislav Fomichev.
2) Fix libbpf global variable relocation to take symbol's st_value offset
into account, from Andrii Nakryiko.
3) Fix libbpf build on powerpc where check_abi target fails due to different
readelf output format, from Aurelien Jarno.
4) Don't set BPF insns RO for the case when they are JITed in order to avoid
fragmenting the direct map, from Daniel Borkmann.
5) Fix static checker warning in btf_distill_func_proto() as well as a build
error due to empty enum when BPF is compiled out, from Alexei Starovoitov.
6) Fix up generation of bpf_helper_defs.h for perf, from Arnaldo Carvalho de Melo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'perf kvm' subcommand has options that it in turn passes to other
perf subcommands such as 'report' and 'record', particularly -i and -o
end up setting the same variable that will then be used for 'record's -o
and report '-i', which ends up being confusing, leading some to think
that both -i and -o can be used with 'report'.
Improve the man page to state that -i is used with the post-processing
subcommands while -o is used just with 'record' and that to save the
output of 'report' one should simply redirect its output to a file.
Noticed while reading the https://www.linux-kvm.org/page/Perf_events
page.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steve Dickson <steved@redhat.com>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-tclbttvmgtm525fvmh85f7d9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from:
a25bbc2644 ("Merge branches 'x86-cpu-for-linus' and 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip")
db4d30fbb7 ("x86/bugs: Add ITLB_MULTIHIT bug infrastructure")
1b42f01741 ("x86/speculation/taa: Add mitigation for TSX Async Abort")
9d40b85bb4 ("x86/cpufeatures: Add feature bit RDPRU on AMD")
These don't cause any changes in tooling, just silences this perf build
warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineela Tummalapalli <vineela.tummalapalli@intel.com>
Link: https://lkml.kernel.org/n/tip-yufg9yt2nbkh45r9xvxnnscq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for the recently added CLONE_CLEAR_SIGHAND flag.
This takes advantage of the copy of the uapi/linux/sched.h we have in
tools/include, which allows us to build tools/perf in older systems and
have the binary support printing that flag whenever that system gets its
kernel updated to one where this feature is present.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Reber <areber@redhat.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org
Link: https://lkml.kernel.org/n/tip-1vnz497ubtu5oz16ygdcul0e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get the changes in:
0acefef584 ("Merge tag 'threads-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux")
49cb2fc42c ("fork: extend clone3() to support setting a PID")
fa729c4df5 ("clone3: validate stack arguments")
b612e5df45 ("clone3: add CLONE_CLEAR_SIGHAND")
This file gets rebuilt, but no changes ensues:
CC /tmp/build/perf/trace/beauty/clone.o
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h'
diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.
The CLONE_CLEAR_SIGHAND one will be used in tools/perf/trace/beauty/clone.c
in a followup patch to show that string when this bit is set in the
syscall arg. Keeping a copy of this file allows us to build this in
older systems and have the binary support printing that flag whenever
that system gets its kernel updated to one where this feature is
present.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Reber <areber@redhat.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-nprqsvvzbhzoy64cbvos6c5b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from:
14edff8831 Merge tag 'kvmarm-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
a4b28f5c67 Merge remote-tracking branch 'kvmarm/kvm-arm64/stolen-time' into kvmarm-master/next
58772e9a3d ("KVM: arm64: Provide VCPU attributes for stolen time")
da345174ce ("KVM: arm/arm64: Allow user injection of external data aborts")
c726200dd1 ("KVM: arm/arm64: Allow reporting non-ISV data aborts to userspace")
efe5ddcae4 ("KVM: PPC: Book3S HV: XIVE: Allow userspace to set the # of VPs")
No tools changes are caused by this, as the only defines so far used
from these files are for syscall arg pretty printing are:
$ grep KVM tools/perf/trace/beauty/*.sh
tools/perf/trace/beauty/kvm_ioctl.sh:regex='^#[[:space:]]*define[[:space:]]+KVM_(\w+)[[:space:]]+_IO[RW]*\([[:space:]]*KVMIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*'
$
Some are also include by:
tools/perf/arch/x86/util/kvm-stat.c
tools/perf/arch/powerpc/util/kvm-stat.c
This addresses these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/kvm.h' differs from latest version at 'arch/powerpc/include/uapi/asm/kvm.h'
diff -u tools/arch/powerpc/include/uapi/asm/kvm.h arch/powerpc/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h'
diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Cc: Greg Kurz <groug@kaod.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Steven Price <steven.price@arm.com>
Link: https://lkml.kernel.org/n/tip-qrjdudhq25mk5bfnhveofbm4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
3ad2522c64 ("statx: define STATX_ATTR_VERITY")
That don't trigger any changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/stat.h' differs from latest version at 'include/uapi/linux/stat.h'
diff -u tools/include/uapi/linux/stat.h include/uapi/linux/stat.h
At some point we wi'll beautify structs passed in pointers to syscalls
and then we'll need to have tables for these defines, for now update the
file to silence the warning as this file is used for doing this type of
number -> string translations for other defines found in these file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-thcy60dpry5qrpn7nmc58bwg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
b103fb7653 ("fscrypt: add support for IV_INO_LBLK_64 policies")
That don't trigger any changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h'
diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-cgfz3ffe07pw2m8hmstvkudl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And update linux/linkage.h, which requires in turn that we make these
files switch from ENTRY()/ENDPROC() to SYM_FUNC_START()/SYM_FUNC_END():
tools/perf/arch/arm64/tests/regs_load.S
tools/perf/arch/arm/tests/regs_load.S
tools/perf/arch/powerpc/tests/regs_load.S
tools/perf/arch/x86/tests/regs_load.S
We also need to switch SYM_FUNC_START_LOCAL() to SYM_FUNC_START() for
the functions used directly by 'perf bench', and update
tools/perf/check_headers.sh to ignore those changes when checking if the
kernel original files drifted from the copies we carry.
This is to get the changes from:
6dcc5627f6 ("x86/asm: Change all ENTRY+ENDPROC to SYM_FUNC_*")
ef1e03152c ("x86/asm: Make some functions local")
e9b9d020c4 ("x86/asm: Annotate aliases")
And address these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S'
diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-tay3l8x8k11p7y3qcpqh9qh5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On powerpc with recent versions of binutils, readelf outputs an extra
field when dumping the symbols of an object file. For example:
35: 0000000000000838 96 FUNC LOCAL DEFAULT [<localentry>: 8] 1 btf_is_struct
The extra "[<localentry>: 8]" prevents the GLOBAL_SYM_COUNT variable to
be computed correctly and causes the check_abi target to fail.
Fix that by looking for the symbol name in the last field instead of the
8th one. This way it should also cope with future extra fields.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/bpf/20191201195728.4161537-1-aurelien@aurel32.net
Merge updates from Andrew Morton:
"Incoming:
- a small number of updates to scripts/, ocfs2 and fs/buffer.c
- most of MM
I still have quite a lot of material (mostly not MM) staged after
linux-next due to -next dependencies. I'll send those across next week
as the preprequisites get merged up"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits)
mm/page_io.c: annotate refault stalls from swap_readpage
mm/Kconfig: fix trivial help text punctuation
mm/Kconfig: fix indentation
mm/memory_hotplug.c: remove __online_page_set_limits()
mm: fix typos in comments when calling __SetPageUptodate()
mm: fix struct member name in function comments
mm/shmem.c: cast the type of unmap_start to u64
mm: shmem: use proper gfp flags for shmem_writepage()
mm/shmem.c: make array 'values' static const, makes object smaller
userfaultfd: require CAP_SYS_PTRACE for UFFD_FEATURE_EVENT_FORK
fs/userfaultfd.c: wp: clear VM_UFFD_MISSING or VM_UFFD_WP during userfaultfd_register()
userfaultfd: wrap the common dst_vma check into an inlined function
userfaultfd: remove unnecessary WARN_ON() in __mcopy_atomic_hugetlb()
userfaultfd: use vma_pagesize for all huge page size calculation
mm/madvise.c: use PAGE_ALIGN[ED] for range checking
mm/madvise.c: replace with page_size() in madvise_inject_error()
mm/mmap.c: make vma_merge() comment more easy to understand
mm/hwpoison-inject: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops
autonuma: reduce cache footprint when scanning page tables
autonuma: fix watermark checking in migrate_balanced_pgdat()
...
Pull networking fixes from David Miller:
1) Fix several scatter gather list issues in kTLS code, from Jakub
Kicinski.
2) macb driver device remove has to kill the hresp_err_tasklet. From
Chuhong Yuan.
3) Several memory leak and reference count bug fixes in tipc, from Tung
Nguyen.
4) Fix mlx5 build error w/o ipv6, from Yue Haibing.
5) Fix jumbo frame and other regressions in r8169, from Heiner
Kallweit.
6) Undo some BUG_ON()'s and replace them with WARN_ON_ONCE and proper
error propagation/handling. From Paolo Abeni.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (24 commits)
openvswitch: remove another BUG_ON()
openvswitch: drop unneeded BUG_ON() in ovs_flow_cmd_build_info()
net: phy: realtek: fix using paged operations with RTL8105e / RTL8208
r8169: fix resume on cable plug-in
r8169: fix jumbo configuration for RTL8168evl
net: emulex: benet: indent a Kconfig depends continuation line
selftests: forwarding: fix race between packet receive and tc check
net: sched: fix `tc -s class show` no bstats on class with nolock subqueues
net: ethernet: ti: ale: ensure vlan/mdb deleted when no members
net/mlx5e: Fix build error without IPV6
selftests: pmtu: use -oneline for ip route list cache
tipc: fix duplicate SYN messages under link congestion
tipc: fix wrong timeout input for tipc_wait_for_cond()
tipc: fix wrong socket reference counter after tipc_sk_timeout() returns
tipc: fix potential memory leak in __tipc_sendmsg()
net: macb: add missed tasklet_kill
selftests: bpf: correct perror strings
selftests: bpf: test_sockmap: handle file creation failures gracefully
net/tls: use sg_next() to walk sg entries
net/tls: remove the dead inplace_crypto code
...
Pull x86 fixes from Ingo Molnar:
"Various fixes:
- Fix the PAT performance regression that downgraded write-combining
device memory regions to uncached.
- There's been a number of bugs in 32-bit double fault handling -
hopefully all fixed now.
- Fix an LDT crash
- Fix an FPU over-optimization that broke with GCC9 code
optimizations.
- Misc cleanups"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/pat: Fix off-by-one bugs in interval tree search
x86/ioperm: Save an indentation level in tss_update_io_bitmap()
x86/fpu: Don't cache access to fpu_fpregs_owner_ctx
x86/entry/32: Remove unused 'restore_all_notrace' local label
x86/ptrace: Document FSBASE and GSBASE ABI oddities
x86/ptrace: Remove set_segment_reg() implementations for current
x86/traps: die() instead of panicking on a double fault
x86/doublefault/32: Rewrite the x86_32 #DF handler and unify with 64-bit
x86/doublefault/32: Move #DF stack and TSS to cpu_entry_area
x86/doublefault/32: Rename doublefault.c to doublefault_32.c
x86/traps: Disentangle the 32-bit and 64-bit doublefault code
lkdtm: Add a DOUBLE_FAULT crash type on x86
selftests/x86/single_step_syscall: Check SYSENTER directly
x86/mm/32: Sync only to VMALLOC_END in vmalloc_sync_all()
Pull perf fixes from Ingo Molnar:
- Make /sys/devices/cpu/rdpmc based RDPMC enforcement more
instantaneous
- decoder: Update the Intel opcode map
- Various tooling fixes, including a few late optimizations and
cleanups.
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
perf script: Fix invalid LBR/binary mismatch error
perf script: Fix brstackinsn for AUXTRACE
perf affinity: Add infrastructure to save/restore affinity
perf pmu: Use file system cache to optimize sysfs access
perf regs: Make perf_reg_name() return "unknown" instead of NULL
perf diff: Use llabs() with 64-bit values
perf diff: Use llabs() with 64-bit values
perf/x86: Implement immediate enforcement of /sys/devices/cpu/rdpmc value of 0
perf tools: Allow to link with libbpf dynamicaly
perf tests: Rename tests/map_groups.c to tests/maps.c
perf tests: Rename thread-mg-share to thread-maps-share
perf maps: Rename map_groups.h to maps.h
perf maps: Rename 'mg' variables to 'maps'
perf map_symbol: Rename ms->mg to ms->maps
perf addr_location: Rename al->mg to al->maps
perf thread: Rename thread->mg to thread->maps
perf maps: Merge 'struct maps' with 'struct map_groups'
x86/insn: perf tools: Add some more instructions to the new instructions test
x86/insn: Add some more Intel instructions to the opcode map
perf map: Remove unused functions
...
* New bootctl driver for Mellanox BlueField SoC.
* New driver to support System76 laptops.
* Temperature monitoring and fan control on Acer Aspire 7551
is now supported.
* Previously the Huawei driver handled only hotkeys.
After the conversion to WMI it has been expanded
to support newer laptop models.
* Big refactoring of intel-speed-select tools allows to
use it on Intel CascadeLake-N systems.
* Touchscreen support for ezpad 6 m4 and
Schneider SCT101CTM tablets
* Miscellaneous clean ups and fixes here and there.
The following is an automated git shortlog grouped by driver:
acerhdf:
- Add support for Acer Aspire 7551
- Rename Peter Feuerer to Peter Kaestle
Add System76 ACPI driver:
- Add System76 ACPI driver
asus-laptop:
- switch to using polled mode of input devices
classmate-laptop:
- remove unused variable
dell-laptop:
- disable kbd backlight on Inspiron 10xx
hdaps:
- switch to using polled mode of input devices
hp-wmi:
- Fix ACPI errors caused by passing 0 as input size
- Fix ACPI errors caused by too small buffer
huawei-wmi:
- Remove unnecessary battery mutex
- No need to check for battery name
- Stricter battery thresholds set
- Fix a precision vs width printf bug
- Avoid use of global variable when possible
- No need to keep pointer to platform device
- Don't leak memory on the exit
- huawei_wmi can be static
- Add debugfs support
- Add fn-lock support
- Add battery charging thresholds
- Implement huawei wmi management
- Add quirks and module parameters
- Move to platform driver
i2c-multi-instantiate:
- Fail the probe if no IRQ provided
intel_cht_int33fe:
- Split code to Micro-B and Type-C
intel_int0002_vgpio:
- Pass irqchip when adding gpiochip
intel_pmc_core:
- Add Comet Lake (CML) platform support to intel_pmc_core driver
- Fix the SoC naming inconsistency
intel_punit_ipc:
- Drop useless label
- use devm_platform_ioremap_resource() to simplify code
- Avoid error message when retrieving IRQ
peaq-wmi:
- switch to using polled mode of input devices
platform/mellanox:
- Fix Kconfig indentation
- Add bootctl driver for Mellanox BlueField Soc
tools/power/x86/intel-speed-select:
- Display TRL buckets for just base config level
- Ignore missing config level
- Increment version
- Use core count for base-freq mask
- Support platform with limited Intel(R) Speed Select
- Use Frequency weight for CLOS
- Make CLOS frequency in MHz
- Use mailbox for CLOS_PM_QOS_CONFIG
- Auto mode for CLX
- Correct CLX-N frequency units
- Change display of "avx" to "avx2"
- Extend command set for perf-profile
- Implement base-freq commands on CascadeLake-N
- Implement 'perf-profile info' on CascadeLake-N
- Implement CascadeLake-N help and command functions structures
- Add check for CascadeLake-N models
- Make process_command generic
- Add int argument to command functions
- Refuse to disable core-power when getting used
- Turbo-freq feature auto mode
- Base-freq feature auto mode
- Remove warning for unused result
toshiba_acpi:
- do not select INPUT_POLLDEV
touchscreen_dmi:
- Add info for the ezpad 6 m4 tablet
- Add touchscreen platform data for the Schneider SCT101CTM tablet
-----BEGIN PGP SIGNATURE-----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=KkPQ
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.5-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- New bootctl driver for Mellanox BlueField SoC.
- New driver to support System76 laptops.
- Temperature monitoring and fan control on Acer Aspire 7551 is now
supported.
- Previously the Huawei driver handled only hotkeys. After the
conversion to WMI it has been expanded to support newer laptop
models.
- Big refactoring of intel-speed-select tools allows to use it on Intel
CascadeLake-N systems.
- Touchscreen support for ezpad 6 m4 and Schneider SCT101CTM tablets
- Miscellaneous clean ups and fixes here and there.
* tag 'platform-drivers-x86-v5.5-1' of git://git.infradead.org/linux-platform-drivers-x86: (59 commits)
platform/x86: hp-wmi: Fix ACPI errors caused by passing 0 as input size
platform/x86: hp-wmi: Fix ACPI errors caused by too small buffer
platform/x86: intel_pmc_core: Add Comet Lake (CML) platform support to intel_pmc_core driver
platform/x86: intel_pmc_core: Fix the SoC naming inconsistency
platform/mellanox: Fix Kconfig indentation
tools/power/x86/intel-speed-select: Display TRL buckets for just base config level
tools/power/x86/intel-speed-select: Ignore missing config level
platform/x86: touchscreen_dmi: Add info for the ezpad 6 m4 tablet
tools/power/x86/intel-speed-select: Increment version
tools/power/x86/intel-speed-select: Use core count for base-freq mask
tools/power/x86/intel-speed-select: Support platform with limited Intel(R) Speed Select
tools/power/x86/intel-speed-select: Use Frequency weight for CLOS
tools/power/x86/intel-speed-select: Make CLOS frequency in MHz
tools/power/x86/intel-speed-select: Use mailbox for CLOS_PM_QOS_CONFIG
tools/power/x86/intel-speed-select: Auto mode for CLX
tools/power/x86/intel-speed-select: Correct CLX-N frequency units
tools/power/x86/intel-speed-select: Change display of "avx" to "avx2"
tools/power/x86/intel-speed-select: Extend command set for perf-profile
Add touchscreen platform data for the Schneider SCT101CTM tablet
platform/x86: intel_int0002_vgpio: Pass irqchip when adding gpiochip
...
When running test_vmalloc.sh smoke the following print out states that
the fragment is missing.
# ./test_vmalloc.sh: You must have the following enabled in your kernel:
# CONFIG_TEST_VMALLOC=m
Rework to add the fragment 'CONFIG_TEST_VMALLOC=m' to the config file.
Link: http://lkml.kernel.org/r/20190916095217.19665-1-anders.roxell@linaro.org
Fixes: a05ef00c97 ("selftests/vm: add script helper for CONFIG_TEST_VMALLOC_MODULE")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In this test, the parent and child both have writable private mappings.
The test shows that without the patch in this series, the parent and
child shared the same memory which is incorrect. In other words, COW
needs to be triggered so any writes to child's copy stays local to the
child.
Link: http://lkml.kernel.org/r/20191107195355.80608-2-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Hibernation support (Dexuan Cui).
- Latency testing framework (Branden Bonaby).
- Decoupling Hyper-V page size from guest page size (Himadri Pandya).
-----BEGIN PGP SIGNATURE-----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=oJGE
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Sasha Levin:
- support for new VMBus protocols (Andrea Parri)
- hibernation support (Dexuan Cui)
- latency testing framework (Branden Bonaby)
- decoupling Hyper-V page size from guest page size (Himadri Pandya)
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic
drivers/hv: Replace binary semaphore with mutex
drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86
HID: hyperv: Add the support of hibernation
hv_balloon: Add the support of hibernation
x86/hyperv: Implement hv_is_hibernation_supported()
Drivers: hv: balloon: Remove dependencies on guest page size
Drivers: hv: vmbus: Remove dependencies on guest page size
x86: hv: Add function to allocate zeroed page for Hyper-V
Drivers: hv: util: Specify ring buffer size using Hyper-V page size
Drivers: hv: Specify receive buffer size using Hyper-V page size
tools: hv: add vmbus testing tool
drivers: hv: vmbus: Introduce latency testing
video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver
video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host
hv_netvsc: Add the support of hibernation
hv_sock: Add the support of hibernation
video: hyperv_fb: Add the support of hibernation
scsi: storvsc: Add the support of hibernation
Drivers: hv: vmbus: Add module parameter to cap the VMBus version
...
Highlights:
- Infrastructure for secure boot on some bare metal Power9 machines. The
firmware support is still in development, so the code here won't actually
activate secure boot on any existing systems.
- A change to xmon (our crash handler / pseudo-debugger) to restrict it to
read-only mode when the kernel is lockdown'ed, otherwise it's trivial to drop
into xmon and modify kernel data, such as the lockdown state.
- Support for KASLR on 32-bit BookE machines (Freescale / NXP).
- Fixes for our flush_icache_range() and __kernel_sync_dicache() (VDSO) to work
with memory ranges >4GB.
- Some reworks of the pseries CMM (Cooperative Memory Management) driver to
make it behave more like other balloon drivers and enable some cleanups of
generic mm code.
- A series of fixes to our hardware breakpoint support to properly handle
unaligned watchpoint addresses.
Plus a bunch of other smaller improvements, fixes and cleanups.
Thanks to:
Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V, Anthony Steinhauser,
Cédric Le Goater, Chris Packham, Chris Smart, Christophe Leroy, Christopher M.
Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Hildenbrand,
Deb McLemore, Diana Craciun, Eric Richter, Geert Uytterhoeven, Greg
Kroah-Hartman, Greg Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason
Yan, Krzysztof Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M.
Rodrigues, Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna
Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes, Ravi
Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth, Tyrel
Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=JHzg
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Highlights:
- Infrastructure for secure boot on some bare metal Power9 machines.
The firmware support is still in development, so the code here
won't actually activate secure boot on any existing systems.
- A change to xmon (our crash handler / pseudo-debugger) to restrict
it to read-only mode when the kernel is lockdown'ed, otherwise it's
trivial to drop into xmon and modify kernel data, such as the
lockdown state.
- Support for KASLR on 32-bit BookE machines (Freescale / NXP).
- Fixes for our flush_icache_range() and __kernel_sync_dicache()
(VDSO) to work with memory ranges >4GB.
- Some reworks of the pseries CMM (Cooperative Memory Management)
driver to make it behave more like other balloon drivers and enable
some cleanups of generic mm code.
- A series of fixes to our hardware breakpoint support to properly
handle unaligned watchpoint addresses.
Plus a bunch of other smaller improvements, fixes and cleanups.
Thanks to: Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V,
Anthony Steinhauser, Cédric Le Goater, Chris Packham, Chris Smart,
Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio
Carvalho, Daniel Axtens, David Hildenbrand, Deb McLemore, Diana
Craciun, Eric Richter, Geert Uytterhoeven, Greg Kroah-Hartman, Greg
Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason Yan, Krzysztof
Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M. Rodrigues,
Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna
Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes,
Ravi Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth,
Tyrel Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing"
* tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (144 commits)
powerpc/fixmap: fix crash with HIGHMEM
x86/efi: remove unused variables
powerpc: Define arch_is_kernel_initmem_freed() for lockdep
powerpc/prom_init: Use -ffreestanding to avoid a reference to bcmp
powerpc: Avoid clang warnings around setjmp and longjmp
powerpc: Don't add -mabi= flags when building with Clang
powerpc: Fix Kconfig indentation
powerpc/fixmap: don't clear fixmap area in paging_init()
selftests/powerpc: spectre_v2 test must be built 64-bit
powerpc/powernv: Disable native PCIe port management
powerpc/kexec: Move kexec files into a dedicated subdir.
powerpc/32: Split kexec low level code out of misc_32.S
powerpc/sysdev: drop simple gpio
powerpc/83xx: map IMMR with a BAT.
powerpc/32s: automatically allocate BAT in setbat()
powerpc/ioremap: warn on early use of ioremap()
powerpc: Add support for GENERIC_EARLY_IOREMAP
powerpc/fixmap: Use __fix_to_virt() instead of fix_to_virt()
powerpc/8xx: use the fixmapped IMMR in cpm_reset()
powerpc/8xx: add __init to cpm1 init functions
...
It is possible that tc stats get checked before the packet we check for
actually arrived into the interface and accounted for.
Fix it by checking for the expected result in a loop until
timeout is reached (by default 1 second).
Fixes: 07e5c75184 ("selftests: forwarding: Introduce tc flower matching tests")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some versions of iproute2 will output more than one line per entry, which
will cause the test to fail, like:
TEST: ipv6: list and flush cached exceptions [FAIL]
can't list cached exceptions
That happens, for example, with iproute2 4.15.0. When using the -oneline
option, this will work just fine:
TEST: ipv6: list and flush cached exceptions [ OK ]
This also works just fine with a more recent version of iproute2, like
5.4.0.
For some reason, two lines are printed for the IPv4 test no matter what
version of iproute2 is used. Use the same -oneline parameter there instead
of counting the lines twice.
Fixes: b964641e99 ("selftests: pmtu: Make list_flush_ipv6_exception test more demanding")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I forgot to fill in the map_symbol->maps field in append_inlines() which
then makes code down the line segfault when trying to deref it.
It doesn't make any sense to have an addr_location with its 'map' member
not NULL while its 'maps' is NULL, after all al->maps is where al->map
is in.
It is done that way so that we don't have to have in each 'struct map' a
pointer to the 'struct maps' it is in, as we had in the past when we
would have 'map->mg', before 'struct maps' was combined with 'struct
map_groups', because there was always a one-to-one relationship for
these structs.
This fixes a segfault when processing DWARF callgraphs in 'perf report'.
Reported-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 08f6680e62 ("perf tools: Add a 'struct map_groups' pointer to 'struct map_symbol'")
Link: http://lore.kernel.org/lkml/20191129160631.GD26963@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adds a test for minimal jit_write_elf functionality.
Committer testing:
# perf test jit
61: Test jit_write_elf : Ok
#
# perf test -v jit
61: Test jit_write_elf :
--- start ---
test child forked, pid 10460
Writing jit code to: /tmp/perf-test-KqxURR
test child finished with 0
---- end ----
Test jit_write_elf: Ok
#
Committer notes:
Fix up the case where HAVE_JITDUMP is no defined.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20191126235913.41855-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Restructure event enabling/disabling to use affinity, which
minimizes the number of IPIs needed.
Before on a large test case with 94 CPUs:
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
54.65 1.899986 22 84812 660 ioctl
after:
39.21 0.930451 10 84796 644 ioctl
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191121001522.180827-13-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Restructure event reading to use affinity to minimize the number of IPIs
needed.
Before on a large test case with 94 CPUs:
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
3.16 0.106079 4 22082 read
After:
3.43 0.081295 3 22082 read
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191121001522.180827-11-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
