When an application connects to the ring buffer via splice, it can only
read full pages. Splice does not work with partial pages. If there is
not enough data to fill a page, the splice command will either block
or return -EAGAIN (if set to nonblock).
Code was added where if the page is not full, to just sleep again.
The problem is, it will get woken up again on the next event. That
is, when something is written into the ring buffer, if there is a waiter
it will wake it up. The waiter would then check the buffer, see that
it still does not have enough data to fill a page and go back to sleep.
To make matters worse, when the waiter goes back to sleep, it could
cause another event, which would wake it back up again to see it
doesn't have enough data and sleep again. This produces a tremendous
overhead and fills the ring buffer with noise.
For example, recording sched_switch on an idle system for 10 seconds
produces 25,350,475 events!!!
Create another wait queue for those waiters wanting full pages.
When an event is written, it only wakes up waiters if there's a full
page of data. It does not wake up the waiter if the page is not yet
full.
After this change, recording sched_switch on an idle system for 10
seconds produces only 800 events. Getting rid of 25,349,675 useless
events (99.9969% of events!!), is something to take seriously.
Cc: stable@vger.kernel.org # 3.16+
Cc: Rabin Vincent <rabin@rab.in>
Fixes: e30f53aad2 "tracing: Do not busy wait in buffer splice"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
- Rework of the core ACPI resources parsing code to fix issues
in it and make using resource offsets more convenient and
consolidation of some resource-handing code in a couple of places
that have grown analagous data structures and code to cover the
the same gap in the core (Jiang Liu, Thomas Gleixner, Lv Zheng).
- ACPI-based IOAPIC hotplug support on top of the resources handling
rework (Jiang Liu, Yinghai Lu).
- ACPICA update to upstream release 20150204 including an interrupt
handling rework that allows drivers to install raw handlers for
ACPI GPEs which then become entirely responsible for the given GPE
and the ACPICA core code won't touch it (Lv Zheng, David E Box,
Octavian Purdila).
- ACPI EC driver rework to fix several concurrency issues and other
problems related to events handling on top of the ACPICA's new
support for raw GPE handlers (Lv Zheng).
- New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power
Subsystem) driver for Intel chips (Ken Xue).
- Two minor fixes of the ACPI LPSS driver (Heikki Krogerus,
Jarkko Nikula).
- Two new blacklist entries for machines (Samsung 730U3E/740U3E and
510R) where the native backlight interface doesn't work correctly
while the ACPI one does (Hans de Goede).
- Rework of the ACPI processor driver's handling of idle states
to make the code more straightforward and less bloated overall
(Rafael J Wysocki).
- Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht,
Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki,
Yaowei Bai).
- PCI core power management modification to avoid resuming (some)
runtime-suspended devices during system suspend if they are in
the right states already (Rafael J Wysocki).
- New SFI-based cpufreq driver for Intel platforms using SFI
(Srinidhi Kasagar).
- cpufreq core fixes, cleanups and simplifications (Viresh Kumar,
Doug Anderson, Wolfram Sang).
- SkyLake CPU support and other updates for the intel_pstate driver
(Kristen Carlson Accardi, Srinivas Pandruvada).
- cpufreq-dt driver cleanup (Markus Elfring).
- Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla).
- Generic power domains core code fixes and cleanups (Ulf Hansson).
- Operating Performance Points (OPP) core code cleanups and kernel
documentation update (Nishanth Menon).
- New dabugfs interface to make the list of PM QoS constraints
available to user space (Nishanth Menon).
- New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso).
- New devfreq class (devfreq_event) to provide raw utilization data
to devfreq governors (Chanwoo Choi).
- Assorted minor fixes and cleanups related to power management
(Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist,
Pavel Machek, Todd E Brandt, Wonhong Kwon).
- turbostat updates (Len Brown) and cpupower Makefile improvement
(Sriram Raghunathan).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=zZER
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"We have a few new features this time, including a new SFI-based
cpufreq driver, a new devfreq driver for Tegra Activity Monitor, a new
devfreq class for providing its governors with raw utilization data
and a new ACPI driver for AMD SoCs.
Still, the majority of changes here are reworks of existing code to
make it more straightforward or to prepare it for implementing new
features on top of it. The primary example is the rework of ACPI
resources handling from Jiang Liu, Thomas Gleixner and Lv Zheng with
support for IOAPIC hotplug implemented on top of it, but there is
quite a number of changes of this kind in the cpufreq core, ACPICA,
ACPI EC driver, ACPI processor driver and the generic power domains
core code too.
The most active developer is Viresh Kumar with his cpufreq changes.
Specifics:
- Rework of the core ACPI resources parsing code to fix issues in it
and make using resource offsets more convenient and consolidation
of some resource-handing code in a couple of places that have grown
analagous data structures and code to cover the the same gap in the
core (Jiang Liu, Thomas Gleixner, Lv Zheng).
- ACPI-based IOAPIC hotplug support on top of the resources handling
rework (Jiang Liu, Yinghai Lu).
- ACPICA update to upstream release 20150204 including an interrupt
handling rework that allows drivers to install raw handlers for
ACPI GPEs which then become entirely responsible for the given GPE
and the ACPICA core code won't touch it (Lv Zheng, David E Box,
Octavian Purdila).
- ACPI EC driver rework to fix several concurrency issues and other
problems related to events handling on top of the ACPICA's new
support for raw GPE handlers (Lv Zheng).
- New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power
Subsystem) driver for Intel chips (Ken Xue).
- Two minor fixes of the ACPI LPSS driver (Heikki Krogerus, Jarkko
Nikula).
- Two new blacklist entries for machines (Samsung 730U3E/740U3E and
510R) where the native backlight interface doesn't work correctly
while the ACPI one does (Hans de Goede).
- Rework of the ACPI processor driver's handling of idle states to
make the code more straightforward and less bloated overall (Rafael
J Wysocki).
- Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht,
Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki, Yaowei
Bai).
- PCI core power management modification to avoid resuming (some)
runtime-suspended devices during system suspend if they are in the
right states already (Rafael J Wysocki).
- New SFI-based cpufreq driver for Intel platforms using SFI
(Srinidhi Kasagar).
- cpufreq core fixes, cleanups and simplifications (Viresh Kumar,
Doug Anderson, Wolfram Sang).
- SkyLake CPU support and other updates for the intel_pstate driver
(Kristen Carlson Accardi, Srinivas Pandruvada).
- cpufreq-dt driver cleanup (Markus Elfring).
- Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla).
- Generic power domains core code fixes and cleanups (Ulf Hansson).
- Operating Performance Points (OPP) core code cleanups and kernel
documentation update (Nishanth Menon).
- New dabugfs interface to make the list of PM QoS constraints
available to user space (Nishanth Menon).
- New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso).
- New devfreq class (devfreq_event) to provide raw utilization data
to devfreq governors (Chanwoo Choi).
- Assorted minor fixes and cleanups related to power management
(Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist, Pavel
Machek, Todd E Brandt, Wonhong Kwon).
- turbostat updates (Len Brown) and cpupower Makefile improvement
(Sriram Raghunathan)"
* tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (151 commits)
tools/power turbostat: relax dependency on APERF_MSR
tools/power turbostat: relax dependency on invariant TSC
Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources
tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS
tools/power turbostat: relax dependency on root permission
ACPI / video: Add disable_native_backlight quirk for Samsung 510R
ACPI / PM: Remove unneeded nested #ifdef
USB / PM: Remove unneeded #ifdef and associated dead code
intel_pstate: provide option to only use intel_pstate with HWP
ACPI / EC: Add GPE reference counting debugging messages
ACPI / EC: Add query flushing support
ACPI / EC: Refine command storm prevention support
ACPI / EC: Add command flushing support.
ACPI / EC: Introduce STARTED/STOPPED flags to replace BLOCKED flag
ACPI: add AMD ACPI2Platform device support for x86 system
ACPI / table: remove duplicate NULL check for the handler of acpi_table_parse()
ACPI / EC: Update revision due to raw handler mode.
ACPI / EC: Reduce ec_poll() by referencing the last register access timestamp.
ACPI / EC: Fix several GPE handling issues by deploying ACPI_GPE_DISPATCH_RAW_HANDLER mode.
ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model
...
Commit 6edb2a8a38 introduced
an array map_pages that contains the addresses returned by
kmap_atomic. However, when unmapping those pages, map_pages[0]
is unmapped before map_pages[1], breaking the nesting requirement
as specified in the documentation for kmap_atomic/kunmap_atomic.
This was caught by the highmem debug code present in kunmap_atomic.
Fix the loop to do the unmapping properly.
Link: http://lkml.kernel.org/r/1418871056-6614-1-git-send-email-markivx@codeaurora.org
Cc: stable@vger.kernel.org # 3.5+
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Reported-by: Lime Yang <limey@codeaurora.org>
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing "instances" directory can create sub tracing buffers
with mkdir, and remove them with rmdir. As a mkdir will also create
all the files and directories that control the sub buffer the inode
mutexes need to be released before this is done, to avoid deadlocks.
It is better to let the tracing system unlock the inode mutexes before
calling the functions that create the files within the new directory
(or deletes the files from the one being destroyed).
Now that tracing has been converted over to tracefs, the tracefs file
system can be modified to accommodate this feature. It still releases
the locks, but the filesystem itself can take care of the ugly
business and let the user just do what it needs.
The tracing system now attaches a descriptor to the directory dentry
that can have userspace create or remove sub directories. If this
descriptor does not exist for a dentry, then that dentry can not be
used to create other directories. This descriptor holds a mkdir and
rmdir method that only takes a character string as an argument.
The tracefs file system will first make a copy of the dentry name
before releasing the locks. Then it will pass the copied name to the
methods. It is up to the tracing system that supplied the methods to
handle races with duplicate names and such as all the inode mutexes
would be released when the functions are called.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As tools currently rely on the tracing directory in debugfs, we can not
just created a tracefs infrastructure and expect sysadmins to mount
the new tracefs to have their old tools work.
Instead, the debugfs tracing directory is still created and the tracefs
file system is mounted there when the debugfs filesystem is mounted.
No longer does the tracing infrastructure update the debugfs file system,
but instead interacts with the tracefs file system. But now, it still
appears to the user like nothing changed, except you also have the feature
of mounting just the tracing system without needing all of debugfs!
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
debugfs was fine for the tracing facility as a quick way to get
an interface. Now that tracing has matured, it should separate itself
from debugfs such that it can be mounted separately without needing
to mount all of debugfs with it. That is, users resist using tracing
because it requires mounting debugfs. Having tracing have its own file
system lets users get the features of tracing without needing to bring
in the rest of the kernel's debug infrastructure.
Another reason for tracefs is that debubfs does not support mkdir.
Currently, to create instances, one does a mkdir in the tracing/instance
directory. This is implemented via a hack that forces debugfs to do
something it is not intended on doing. By converting over to tracefs, this
hack can be removed and mkdir can be properly implemented. This patch does
not address this yet, but it lays the ground work for that to be done.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The options for cmdline tracers are not created if the debugfs system
is not ready yet. If tracing has started before debugfs is up, then the
option files for the tracer are not created. Create them when creating
the tracing directory if the current tracer requires option files.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Do not bother creating tracer options if no tracing directory
exists. If a tracer is enabled via the command line, and is
started before the tracing directory is created, then it wont have
its tracer specific options created.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull in Al Viro's changes to debugfs that implement the new primitive:
debugfs_create_automount(), that creates a directory in debugfs that will
safely mount another file system automatically when debugfs is mounted.
This will let tracefs automount itself on top of debugfs/tracing directory.
The top level trace array is treated a little different than the
instances, as it has to deal with more of the general tracing.
The tr->dir is the tracing directory, which is an immutable
dentry, where as the tr->dir of instances are the dentry that
was created, and can be destroyed later. These should have different
functions accessing them.
As only tracing_init_dentry() deals with the top level array, fold
the code for it into that function, and remove the trace_init_dentry_tr()
that was also used by the instances to get their directory dentry.
Add a tracing_get_dentry() to just get the tracing dir entry for
instances as well as the top level array.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Export the suspend_resume tracepoint so it can be used
in loadable modules.
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the kernel is compiled with function tracer support the -pg compile option
is passed to gcc to generate extra code into the prologue of each function.
This patch replaces the "open-coded" -pg compile flag with a CC_FLAGS_FTRACE
makefile variable which architectures can override if a different option
should be used for code generation.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The ring_buffer_producer uses 'struct timeval' to measure
its start and end times. 'struct timeval' on 32-bit systems
will have its tv_sec value overflow in year 2038 and beyond.
This patch replaces struct timeval with 'ktime_t' which uses
64-bit representation for nanoseconds.
Link: http://lkml.kernel.org/r/20150128141611.GA2701@tinar
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If a trace event contains an array, there is currently no standard
way to format this for text output. Drivers are currently hacking
around this by a) local hacks that use the trace_seq functionailty
directly, or b) just not printing that information. For fixed size
arrays, formatting of the elements can be open-coded, but this gets
cumbersome for arrays of non-trivial size.
These approaches result in non-standard content of the event format
description delivered to userspace, so userland tools needs to be
taught to understand and parse each array printing method
individually.
This patch implements a __print_array() helper that tracepoint
implementations can use instead of reinventing it. A simple C-style
syntax is used to delimit the array and its elements {like,this}.
So that the helpers can be used with large static arrays as well as
dynamic arrays, they take a pointer and element count: they can be
used with __get_dynamic_array() for use with dynamic arrays.
Link: http://lkml.kernel.org/r/1422449335-8289-2-git-send-email-javi.merino@arm.com
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove the output-confusing newline below:
[ 0.191328]
**********************************************************
[ 0.191493] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.191586] ** **
...
Link: http://lkml.kernel.org/r/1422375440-31970-1-git-send-email-bp@alien8.de
Signed-off-by: Borislav Petkov <bp@suse.de>
[ added an extra '\n' by itself, to keep what it was suppose to do ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_init_dentry() will soon return NULL as a valid pointer for the
top level tracing directroy. NULL can not be used as an error value.
Instead, switch to ERR_PTR() and check the return status with
IS_ERR().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The creation of tracing files and directories is for the most part
encapsulated in helper functions in trace.c. Other files do not need to
include debugfs.h or fs.h, as they may have needed to in the past.
Remove them from the files that do not need them.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
the mixture of function graph tracing and kprobes.
When jprobes and function graph tracing is enabled at the same time
it will crash the system.
# modprobe jprobe_example
# echo function_graph > /sys/kernel/debug/tracing/current_tracer
After the first fork (jprobe_example probes it), the system will crash.
This is due to the way jprobes copies the stack frame and does not
do a normal function return. This messes up with the function graph
tracing accounting which hijacks the return address from the stack
and replaces it with a hook function. It saves the return addresses in
a separate stack to put back the correct return address when done.
But because the jprobe functions do not do a normal return, their
stack addresses are not put back until the function they probe is called,
which means that the probed function will get the return address of
the jprobe handler instead of its own.
The simple fix here was to disable function graph tracing while the
jprobe handler is being called.
While debugging this I found two minor bugs with the function graph
tracing.
The first was about the function graph tracer sharing its function hash
with the function tracer (they both get filtered by the same input).
The changing of the set_ftrace_filter would not sync the function recording
records after a change if the function tracer was disabled but the
function graph tracer was enabled. This was due to the update only checking
one of the ops instead of the shared ops to see if they were enabled and
should perform the sync. This caused the ftrace accounting to break and
a ftrace_bug() would be triggered, disabling ftrace until a reboot.
The second was that the check to update records only checked one of the
filter hashes. It needs to test both the "filter" and "notrace" hashes.
The "filter" hash determines what functions to trace where as the "notrace"
hash determines what functions not to trace (trace all but these).
Both hashes need to be passed to the update code to find out what change
is being done during the update. This also broke the ftrace record
accounting and triggered a ftrace_bug().
This patch set also include two more fixes that were reported separately
from the kprobe issue.
One was that init_ftrace_syscalls() was called twice at boot up.
This is not a major bug, but that call performed a rather large kmalloc
(NR_syscalls * sizeof(*syscalls_metadata)). The second call made the first
one a memory leak, and wastes memory.
The other fix is a regression caused by an update in the v3.19 merge window.
The moving to enable events early, moved the enabling before PID 1 was
created. The syscall events require setting the TIF_SYSCALL_TRACEPOINT
for all tasks. But for_each_process_thread() does not include the swapper
task (PID 0), and ended up being a nop. A suggested fix was to add
the init_task() to have its flag set, but I didn't really want to mess
with PID 0 for this minor bug. Instead I disable and re-enable events again
at early_initcall() where it use to be enabled. This also handles any other
event that might have its own reg function that could break at early
boot up.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUt9vmAAoJEEjnJuOKh9ldLHEIAJ9XrPW2xMIY5yI69jT1F7pv
PkSRqENnOK0l4UulD52SvIBecQTTBcEEjao4yVGkc7DCJBOws/1LZ5gW8OfNlKjq
rMB8yaosL1tXJ1ARVPMjcQVy+228zkgTXznwEZCjku1g7LuScQ28qyXsXO7B6yiK
xKoHqKjygmM/a2aVn+8tdiVKiDp6jdmkbYicbaFT4xP7XB5DaMmIiXRHxdvW6xdR
azKrVfYiMyJqTZNt/EVSWUk2WjeaYhoXyNtvgPx515wTo/llCnzhjcsocXBtH2P/
YOtwl+1L7Z89ukV9oXqrtrUJZ6Ps7+g7I1flJuL7/1FlNGnklcP9JojD+t6HeT8=
=vkec
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fixes from Steven Rostedt:
"This holds a few fixes to the ftrace infrastructure as well as the
mixture of function graph tracing and kprobes.
When jprobes and function graph tracing is enabled at the same time it
will crash the system:
# modprobe jprobe_example
# echo function_graph > /sys/kernel/debug/tracing/current_tracer
After the first fork (jprobe_example probes it), the system will
crash.
This is due to the way jprobes copies the stack frame and does not do
a normal function return. This messes up with the function graph
tracing accounting which hijacks the return address from the stack and
replaces it with a hook function. It saves the return addresses in a
separate stack to put back the correct return address when done. But
because the jprobe functions do not do a normal return, their stack
addresses are not put back until the function they probe is called,
which means that the probed function will get the return address of
the jprobe handler instead of its own.
The simple fix here was to disable function graph tracing while the
jprobe handler is being called.
While debugging this I found two minor bugs with the function graph
tracing.
The first was about the function graph tracer sharing its function
hash with the function tracer (they both get filtered by the same
input). The changing of the set_ftrace_filter would not sync the
function recording records after a change if the function tracer was
disabled but the function graph tracer was enabled. This was due to
the update only checking one of the ops instead of the shared ops to
see if they were enabled and should perform the sync. This caused the
ftrace accounting to break and a ftrace_bug() would be triggered,
disabling ftrace until a reboot.
The second was that the check to update records only checked one of
the filter hashes. It needs to test both the "filter" and "notrace"
hashes. The "filter" hash determines what functions to trace where as
the "notrace" hash determines what functions not to trace (trace all
but these). Both hashes need to be passed to the update code to find
out what change is being done during the update. This also broke the
ftrace record accounting and triggered a ftrace_bug().
This patch set also include two more fixes that were reported
separately from the kprobe issue.
One was that init_ftrace_syscalls() was called twice at boot up. This
is not a major bug, but that call performed a rather large kmalloc
(NR_syscalls * sizeof(*syscalls_metadata)). The second call made the
first one a memory leak, and wastes memory.
The other fix is a regression caused by an update in the v3.19 merge
window. The moving to enable events early, moved the enabling before
PID 1 was created. The syscall events require setting the
TIF_SYSCALL_TRACEPOINT for all tasks. But for_each_process_thread()
does not include the swapper task (PID 0), and ended up being a nop.
A suggested fix was to add the init_task() to have its flag set, but I
didn't really want to mess with PID 0 for this minor bug. Instead I
disable and re-enable events again at early_initcall() where it use to
be enabled. This also handles any other event that might have its own
reg function that could break at early boot up"
* tag 'trace-fixes-v3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix enabling of syscall events on the command line
tracing: Remove extra call to init_ftrace_syscalls()
ftrace/jprobes/x86: Fix conflict between jprobes and function graph tracing
ftrace: Check both notrace and filter for old hash
ftrace: Fix updating of filters for shared global_ops filters
Commit 5f893b2639 "tracing: Move enabling tracepoints to just after
rcu_init()" broke the enabling of system call events from the command
line. The reason was that the enabling of command line trace events
was moved before PID 1 started, and the syscall tracepoints require
that all tasks have the TIF_SYSCALL_TRACEPOINT flag set. But the
swapper task (pid 0) is not part of that. Since the swapper task is the
only task that is running at this early in boot, no task gets the
flag set, and the tracepoint never gets reached.
Instead of setting the swapper task flag (there should be no reason to
do that), re-enabled trace events again after the init thread (PID 1)
has been started. It requires disabling all command line events and
re-enabling them, as just enabling them again will not reset the logic
to set the TIF_SYSCALL_TRACEPOINT flag, as the syscall tracepoint will
be fooled into thinking that it was already set, and wont try setting
it again. For this reason, we must first disable it and re-enable it.
Link: http://lkml.kernel.org/r/1421188517-18312-1-git-send-email-mpe@ellerman.id.au
Link: http://lkml.kernel.org/r/20150115040506.216066449@goodmis.org
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_init() calls init_ftrace_syscalls() and then calls trace_event_init()
which also calls init_ftrace_syscalls(). It makes more sense to only
call it from trace_event_init().
Calling it twice wastes memory, as it allocates the syscall events twice,
and loses the first copy of it.
Link: http://lkml.kernel.org/r/54AF53BD.5070303@huawei.com
Link: http://lkml.kernel.org/r/20150115040505.930398632@goodmis.org
Reported-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Using just the filter for checking for trampolines or regs is not enough
when updating the code against the records that represent all functions.
Both the filter hash and the notrace hash need to be checked.
To trigger this bug (using trace-cmd and perf):
# perf probe -a do_fork
# trace-cmd start -B foo -e probe
# trace-cmd record -p function_graph -n do_fork sleep 1
The trace-cmd record at the end clears the filter before it disables
function_graph tracing and then that causes the accounting of the
ftrace function records to become incorrect and causes ftrace to bug.
Link: http://lkml.kernel.org/r/20150114154329.358378039@goodmis.org
Cc: stable@vger.kernel.org
[ still need to switch old_hash_ops to old_ops_hash ]
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As the set_ftrace_filter affects both the function tracer as well as the
function graph tracer, the ops that represent each have a shared
ftrace_ops_hash structure. This allows both to be updated when the filter
files are updated.
But if function graph is enabled and the global_ops (function tracing) ops
is not, then it is possible that the filter could be changed without the
update happening for the function graph ops. This will cause the changes
to not take place and may even cause a ftrace_bug to occur as it could mess
with the trampoline accounting.
The solution is to check if the ops uses the shared global_ops filter and
if the ops itself is not enabled, to check if there's another ops that is
enabled and also shares the global_ops filter. In that case, the
modification still needs to be executed.
Link: http://lkml.kernel.org/r/20150114154329.055980438@goodmis.org
Cc: stable@vger.kernel.org # 3.17+
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Both Linus (most recent) and Steve (a while ago) reported that perf
related callbacks have massive stack bloat.
The problem is that software events need a pt_regs in order to
properly report the event location and unwind stack. And because we
could not assume one was present we allocated one on stack and filled
it with minimal bits required for operation.
Now, pt_regs is quite large, so this is undesirable. Furthermore it
turns out that most sites actually have a pt_regs pointer available,
making this even more onerous, as the stack space is pointless waste.
This patch addresses the problem by observing that software events
have well defined nesting semantics, therefore we can use static
per-cpu storage instead of on-stack.
Linus made the further observation that all but the scheduler callers
of perf_sw_event() have a pt_regs available, so we change the regular
perf_sw_event() to require a valid pt_regs (where it used to be
optional) and add perf_sw_event_sched() for the scheduler.
We have a scheduler specific call instead of a more generic _noregs()
like construct because we can assume non-recursion from the scheduler
and thereby simplify the code further (_noregs would have to put the
recursion context call inline in order to assertain which __perf_regs
element to use).
One last note on the implementation of perf_trace_buf_prepare(); we
allow .regs = NULL for those cases where we already have a pt_regs
pointer available and do not need another.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Link: http://lkml.kernel.org/r/20141216115041.GW3337@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cleanups
kdb: Remove unused command flags, repeat flags and KDB_REPEAT_NONE
Fixes
kgdb/kdb: Allow access on a single core, if a CPU round up is deemed
impossible, which will allow inspection of the now "trashed" kernel
kdb: Add enable mask for the command groups
kdb: access controls to restrict sensitive commands
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cf1c
-----END PGP SIGNATURE-----
Merge tag 'for_linus-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb
Pull kgdb/kdb fixes from Jason Wessel:
"These have been around since 3.17 and in kgdb-next for the last 9
weeks and some will go back to -stable.
Summary of changes:
Cleanups
- kdb: Remove unused command flags, repeat flags and KDB_REPEAT_NONE
Fixes
- kgdb/kdb: Allow access on a single core, if a CPU round up is
deemed impossible, which will allow inspection of the now "trashed"
kernel
- kdb: Add enable mask for the command groups
- kdb: access controls to restrict sensitive commands"
* tag 'for_linus-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
kernel/debug/debug_core.c: Logging clean-up
kgdb: timeout if secondary CPUs ignore the roundup
kdb: Allow access to sensitive commands to be restricted by default
kdb: Add enable mask for groups of commands
kdb: Categorize kdb commands (similar to SysRq categorization)
kdb: Remove KDB_REPEAT_NONE flag
kdb: Use KDB_REPEAT_* values as flags
kdb: Rename kdb_register_repeat() to kdb_register_flags()
kdb: Rename kdb_repeat_t to kdb_cmdflags_t, cmd_repeat to cmd_flags
kdb: Remove currently unused kdbtab_t->cmd_flags
Taking the global mutex "trace_types_lock" in the trace_pipe files
causes a bottle neck as most the pipe files can be read per cpu
and there's no reason to serialize them.
The current_trace variable was given a ref count and it can not
change when the ref count is not zero. Opening the trace_pipe
files will up the ref count (and decremented on close), so that
the lock no longer needs to be taken when accessing the
current_trace variable.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When one of the trace pipe files are being read (by either the trace_pipe
or trace_pipe_raw), do not allow the current_trace to change. By adding
a ref count that is incremented when the pipe files are opened, will
prevent the current_trace from being changed.
This will allow for the removal of the global trace_types_lock from
reading the pipe buffers (which is currently a bottle neck).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
- Fix a regression in leds-gpio introduced by a recent commit that
inadvertently changed the name of one of the properties used by
the driver (Fabio Estevam).
- Fix a regression in the ACPI backlight driver introduced by a
recent fix that missed one special case that had to be taken
into account (Aaron Lu).
- Drop the level of some new kernel messages from the ACPI core
introduced by a recent commit to KERN_DEBUG which they should
have used from the start and drop some other unuseful KERN_ERR
messages printed by ACPI (Rafael J Wysocki).
- Revert an incorrect commit modifying the cpupower tool
(Prarit Bhargava).
- Fix two regressions introduced by recent commits in the OPP
library and clean up some existing minor issues in that code
(Viresh Kumar).
- Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout
the tree (or drop it where that can be done) in order to make
it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki,
Ulf Hansson, Ludovic Desroches). There will be one more
"CONFIG_PM_RUNTIME removal" batch after this one, because some
new uses of it have been introduced during the current merge
window, but that should be sufficient to finally get rid of it.
- Make the ACPI EC driver more robust against race conditions
related to GPE handler installation failures (Lv Zheng).
- Prevent the ACPI device PM core code from attempting to
disable GPEs that it has not enabled which confuses ACPICA
and makes it report errors unnecessarily (Rafael J Wysocki).
- Add a "force" command line switch to the intel_pstate driver
to make it possible to override the blacklisting of some
systems in that driver if needed (Ethan Zhao).
- Improve intel_pstate code documentation and add a MAINTAINERS
entry for it (Kristen Carlson Accardi).
- Make the ACPI fan driver create cooling device interfaces
witn names that reflect the IDs of the ACPI device objects
they are associated with, except for "generic" ACPI fans
(PNP ID "PNP0C0B"). That's necessary for user space thermal
management tools to be able to connect the fans with the
parts of the system they are supposed to be cooling properly.
From Srinivas Pandruvada.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=5fo2
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management updates from Rafael Wysocki:
"These are regression fixes (leds-gpio, ACPI backlight driver,
operating performance points library, ACPI device enumeration
messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device
PM), some cleanups in the operating performance points (OPP)
framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of
minor intel_pstate driver changes, a new MAINTAINERS entry for it and
an ACPI fan driver change needed for better support of thermal
management in user space.
Specifics:
- Fix a regression in leds-gpio introduced by a recent commit that
inadvertently changed the name of one of the properties used by the
driver (Fabio Estevam).
- Fix a regression in the ACPI backlight driver introduced by a
recent fix that missed one special case that had to be taken into
account (Aaron Lu).
- Drop the level of some new kernel messages from the ACPI core
introduced by a recent commit to KERN_DEBUG which they should have
used from the start and drop some other unuseful KERN_ERR messages
printed by ACPI (Rafael J Wysocki).
- Revert an incorrect commit modifying the cpupower tool (Prarit
Bhargava).
- Fix two regressions introduced by recent commits in the OPP library
and clean up some existing minor issues in that code (Viresh
Kumar).
- Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the
tree (or drop it where that can be done) in order to make it
possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf
Hansson, Ludovic Desroches).
There will be one more "CONFIG_PM_RUNTIME removal" batch after this
one, because some new uses of it have been introduced during the
current merge window, but that should be sufficient to finally get
rid of it.
- Make the ACPI EC driver more robust against race conditions related
to GPE handler installation failures (Lv Zheng).
- Prevent the ACPI device PM core code from attempting to disable
GPEs that it has not enabled which confuses ACPICA and makes it
report errors unnecessarily (Rafael J Wysocki).
- Add a "force" command line switch to the intel_pstate driver to
make it possible to override the blacklisting of some systems in
that driver if needed (Ethan Zhao).
- Improve intel_pstate code documentation and add a MAINTAINERS entry
for it (Kristen Carlson Accardi).
- Make the ACPI fan driver create cooling device interfaces witn
names that reflect the IDs of the ACPI device objects they are
associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B").
That's necessary for user space thermal management tools to be able
to connect the fans with the parts of the system they are supposed
to be cooling properly. From Srinivas Pandruvada"
* tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
MAINTAINERS: add entry for intel_pstate
ACPI / video: update the skip case for acpi_video_device_in_dod()
power / PM: Eliminate CONFIG_PM_RUNTIME
NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
ACPI / EC: Fix unexpected ec_remove_handlers() invocations
Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()"
tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c
PM: Remove the SET_PM_RUNTIME_PM_OPS() macro
mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro
PM / Kconfig: Replace PM_RUNTIME with PM in dependencies
ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM
ACPI / PM: Do not disable wakeup GPEs that have not been enabled
ACPI / utils: Drop error messages from acpi_evaluate_reference()
...
as I thought it might be. I'm pushing this in now.
This will allow Thomas to debug his irq work for 3.20.
This adds two new features:
1) Allow traceopoints to be enabled right after mm_init(). By passing
in the trace_event= kernel command line parameter, tracepoints can be
enabled at boot up. For debugging things like the initialization of
interrupts, it is needed to have tracepoints enabled very early. People
have asked about this before and this has been on my todo list. As it
can be helpful for Thomas to debug his upcoming 3.20 IRQ work, I'm
pushing this now. This way he can add tracepoints into the IRQ set up
and have users enable them when things go wrong.
2) Have the tracepoints printed via printk() (the console) when they
are triggered. If the irq code locks up or reboots the box, having the
tracepoint output go into the kernel ring buffer is useless for
debugging. But being able to add the tp_printk kernel command line
option along with the trace_event= option will have these tracepoints
printed as they occur, and that can be really useful for debugging
early lock up or reboot problems.
This code is not that intrusive and it passed all my tests. Thomas tried
them out too and it works for his needs.
Link: http://lkml.kernel.org/r/20141214201609.126831471@goodmis.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUjv3kAAoJEEjnJuOKh9ldLNsIANAe5EmDCBw0WjR72n+G3qOH
NC8calXfkjqHU0bv8Q3dRv20KH4MHOy6l4+EiV9/ovt71LOF3NEyUJ3HuShf9a8b
sWcUhYbX3D1hViQe5sOzv9AWhBCFlKQGoNmQnydX9xa8ivRsBaTGJIGktWlHcwBE
jF1i3fj3l3vRQSS8qZFXp3bzreunlGyPoSHcT6eWQeos+utj4sKwQWTLXTLQeM+6
oQtFKRx7E5yX04qO1qFczS8qIEC6JH2C2jIRYEKUGepaELlnGkb8O7jQV/RaLF4/
6P8VhZFG9YLS7fn7vWu0SnAN+Zwz5LzgjXAZt0FhGtIhLc18Oj8ouHH1UORsdQM=
=Z4Un
-----END PGP SIGNATURE-----
Merge tag 'trace-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"As the merge window is still open, and this code was not as complex as
I thought it might be. I'm pushing this in now.
This will allow Thomas to debug his irq work for 3.20.
This adds two new features:
1) Allow traceopoints to be enabled right after mm_init().
By passing in the trace_event= kernel command line parameter,
tracepoints can be enabled at boot up. For debugging things like
the initialization of interrupts, it is needed to have tracepoints
enabled very early. People have asked about this before and this
has been on my todo list. As it can be helpful for Thomas to debug
his upcoming 3.20 IRQ work, I'm pushing this now. This way he can
add tracepoints into the IRQ set up and have users enable them when
things go wrong.
2) Have the tracepoints printed via printk() (the console) when they
are triggered.
If the irq code locks up or reboots the box, having the tracepoint
output go into the kernel ring buffer is useless for debugging.
But being able to add the tp_printk kernel command line option
along with the trace_event= option will have these tracepoints
printed as they occur, and that can be really useful for debugging
early lock up or reboot problems.
This code is not that intrusive and it passed all my tests. Thomas
tried them out too and it works for his needs.
Link: http://lkml.kernel.org/r/20141214201609.126831471@goodmis.org"
* tag 'trace-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Add tp_printk cmdline to have tracepoints go to printk()
tracing: Move enabling tracepoints to just after rcu_init()
Add the kernel command line tp_printk option that will have tracepoints
that are active sent to printk() as well as to the trace buffer.
Passing "tp_printk" will activate this. To turn it off, the sysctl
/proc/sys/kernel/tracepoint_printk can have '0' echoed into it. Note,
this only works if the cmdline option is used. Echoing 1 into the sysctl
file without the cmdline option will have no affect.
Note, this is a dangerous option. Having high frequency tracepoints send
their data to printk() can possibly cause a live lock. This is another
reason why this is only active if the command line option is used.
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412121539300.16494@nanos
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Enabling tracepoints at boot up can be very useful. The tracepoint
can be initialized right after RCU has been. There's no need to
wait for the early_initcall() to be called. That's too late for some
things that can use tracepoints for debugging. Move the logic to
enable tracepoints out of the initcalls and into init/main.c to
right after rcu_init().
This also allows trace_printk() to be used early too.
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412121539300.16494@nanos
Link: http://lkml.kernel.org/r/20141214164104.307127356@goodmis.org
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull block driver core update from Jens Axboe:
"This is the pull request for the core block IO changes for 3.19. Not
a huge round this time, mostly lots of little good fixes:
- Fix a bug in sysfs blktrace interface causing a NULL pointer
dereference, when enabled/disabled through that API. From Arianna
Avanzini.
- Various updates/fixes/improvements for blk-mq:
- A set of updates from Bart, mostly fixing buts in the tag
handling.
- Cleanup/code consolidation from Christoph.
- Extend queue_rq API to be able to handle batching issues of IO
requests. NVMe will utilize this shortly. From me.
- A few tag and request handling updates from me.
- Cleanup of the preempt handling for running queues from Paolo.
- Prevent running of unmapped hardware queues from Ming Lei.
- Move the kdump memory limiting check to be in the correct
location, from Shaohua.
- Initialize all software queues at init time from Takashi. This
prevents a kobject warning when CPUs are brought online that
weren't online when a queue was registered.
- Single writeback fix for I_DIRTY clearing from Tejun. Queued with
the core IO changes, since it's just a single fix.
- Version X of the __bio_add_page() segment addition retry from
Maurizio. Hope the Xth time is the charm.
- Documentation fixup for IO scheduler merging from Jan.
- Introduce (and use) generic IO stat accounting helpers for non-rq
drivers, from Gu Zheng.
- Kill off artificial limiting of max sectors in a request from
Christoph"
* 'for-3.19/core' of git://git.kernel.dk/linux-block: (26 commits)
bio: modify __bio_add_page() to accept pages that don't start a new segment
blk-mq: Fix uninitialized kobject at CPU hotplugging
blktrace: don't let the sysfs interface remove trace from running list
blk-mq: Use all available hardware queues
blk-mq: Micro-optimize bt_get()
blk-mq: Fix a race between bt_clear_tag() and bt_get()
blk-mq: Avoid that __bt_get_word() wraps multiple times
blk-mq: Fix a use-after-free
blk-mq: prevent unmapped hw queue from being scheduled
blk-mq: re-check for available tags after running the hardware queue
blk-mq: fix hang in bt_get()
blk-mq: move the kdump check to blk_mq_alloc_tag_set
blk-mq: cleanup tag free handling
blk-mq: use 'nr_cpu_ids' as highest CPU ID count for hwq <-> cpu map
blk: introduce generic io stat accounting help function
blk-mq: handle the single queue case in blk_mq_hctx_next_cpu
genhd: check for int overflow in disk_expand_part_tbl()
blk-mq: add blk_mq_free_hctx_request()
blk-mq: export blk_mq_free_request()
blk-mq: use get_cpu/put_cpu instead of preempt_disable/preempt_enable
...
After commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so files that are
build conditionally if CONFIG_PM_RUNTIME is set may now be build
if CONFIG_PM is set.
Replace CONFIG_PM_RUNTIME with CONFIG_PM in kernel/trace/Makefile
for this reason.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org.
clean ups from that branch.
This code solves the issue of performing stack dumps from NMI context.
The issue is that printk() is not safe from NMI context as if the NMI
were to trigger when a printk() was being performed, the NMI could
deadlock from the printk() internal locks. This has been seen in practice.
With lots of review from Petr Mladek, this code went through several
iterations, and we feel that it is now at a point of quality to be
accepted into mainline.
Here's what is contained in this patch set:
o Creates a "seq_buf" generic buffer utility that allows a descriptor
to be passed around where functions can write their own "printk()"
formatted strings into it. The generic version was pulled out of
the trace_seq() code that was made specifically for tracing.
o The seq_buf code was change to model the seq_file code. I have
a patch (not included for 3.19) that converts the seq_file.c code
over to use seq_buf.c like the trace_seq.c code does. This was done
to make sure that seq_buf.c is compatible with seq_file.c. I may
try to get that patch in for 3.20.
o The seq_buf.c file was moved to lib/ to remove it from being dependent
on CONFIG_TRACING.
o The printk() was updated to allow for a per_cpu "override" of
the internal calls. That is, instead of writing to the console, a call
to printk() may do something else. This made it easier to allow the
NMI to change what printk() does in order to call dump_stack() without
needing to update that code as well.
o Finally, the dump_stack from all CPUs via NMI code was converted to
use the seq_buf code. The caller to trigger the NMI code would wait
till all the NMIs finished, and then it would print the seq_buf
data to the console safely from a non NMI context.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUhbrnAAoJEEjnJuOKh9ldsCoIAJ3sKIJ5B3jxJJTCHPAx/lZD
GVbV1J1mu4kTAZuhJZOAxW8D6PZGZMyEjg0y6ScDEnBGcjAZ9gTiWCdakPktf9EX
GfaPPqwiL9dZ18J9Qc6uR+7M1Ffpzzwbcc6lJrpoTcjRgkoH9wCiLS9ozFQyYzWb
/7m5UbUM/PIk9WAjLYXPW6UUVtPTPT0RdEQKofMGTeah+vgqj4TXCOROdlxsXXWF
77vqBvPd5TUPWFH9ftzJGDtZS8SroXVKCu3fZIqHgzAU0yqwVtH/JzDTy9u2UYhX
GzDEPeAIdp6m6Uyc406VuIf1QW0gfBgmA0ir80vFoP27uFMM6j5HlF7azgQfx34=
=YBgA
-----END PGP SIGNATURE-----
Merge tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull nmi-safe seq_buf printk update from Steven Rostedt:
"This code is a fork from the trace-3.19 pull as it needed the
trace_seq clean ups from that branch.
This code solves the issue of performing stack dumps from NMI context.
The issue is that printk() is not safe from NMI context as if the NMI
were to trigger when a printk() was being performed, the NMI could
deadlock from the printk() internal locks. This has been seen in
practice.
With lots of review from Petr Mladek, this code went through several
iterations, and we feel that it is now at a point of quality to be
accepted into mainline.
Here's what is contained in this patch set:
- Creates a "seq_buf" generic buffer utility that allows a descriptor
to be passed around where functions can write their own "printk()"
formatted strings into it. The generic version was pulled out of
the trace_seq() code that was made specifically for tracing.
- The seq_buf code was change to model the seq_file code. I have a
patch (not included for 3.19) that converts the seq_file.c code
over to use seq_buf.c like the trace_seq.c code does. This was
done to make sure that seq_buf.c is compatible with seq_file.c. I
may try to get that patch in for 3.20.
- The seq_buf.c file was moved to lib/ to remove it from being
dependent on CONFIG_TRACING.
- The printk() was updated to allow for a per_cpu "override" of the
internal calls. That is, instead of writing to the console, a call
to printk() may do something else. This made it easier to allow
the NMI to change what printk() does in order to call dump_stack()
without needing to update that code as well.
- Finally, the dump_stack from all CPUs via NMI code was converted to
use the seq_buf code. The caller to trigger the NMI code would
wait till all the NMIs finished, and then it would print the
seq_buf data to the console safely from a non NMI context
One added bonus is that this code also makes the NMI dump stack work
on PREEMPT_RT kernels. As printk() includes sleeping locks on
PREEMPT_RT, printk() only writes to console if the console does not
use any rt_mutex converted spin locks. Which a lot do"
* tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
x86/nmi: Fix use of unallocated cpumask_var_t
printk/percpu: Define printk_func when printk is not defined
x86/nmi: Perform a safe NMI stack trace on all CPUs
printk: Add per_cpu printk func to allow printk to be diverted
seq_buf: Move the seq_buf code to lib/
seq-buf: Make seq_buf_bprintf() conditional on CONFIG_BINARY_PRINTF
tracing: Add seq_buf_get_buf() and seq_buf_commit() helper functions
tracing: Have seq_buf use full buffer
seq_buf: Add seq_buf_can_fit() helper function
tracing: Add paranoid size check in trace_printk_seq()
tracing: Use trace_seq_used() and seq_buf_used() instead of len
tracing: Clean up tracing_fill_pipe_page()
seq_buf: Create seq_buf_used() to find out how much was written
tracing: Add a seq_buf_clear() helper and clear len and readpos in init
tracing: Convert seq_buf fields to be like seq_file fields
tracing: Convert seq_buf_path() to be like seq_path()
tracing: Create seq_buf layer in trace_seq
to the trace_seq code. It also removed the return values to the
trace_seq_*() functions and use trace_seq_has_overflowed() to see if
the buffer filled up or not. This is similar to work being done to the
seq_file code as well in another tree.
Some of the other goodies include:
o Added some "!" (NOT) logic to the tracing filter.
o Fixed the frame pointer logic to the x86_64 mcount trampolines
o Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems.
That is, the ftrace trampoline can be dynamically allocated
and be called directly by functions that only have a single hook
to them.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUhbLGAAoJEEjnJuOKh9ldRV4H/3NcLbgGB2iu96la1zdYE6pG
Q7cDJMxXK80YIIL70h9G0IItcD4t62LMb72lfBnMGRj3msgFb3AgISW57EuI0Pxk
xk24wuIPoTG2S7v9sc3SboNFwO8qbtIjxD2OBmqIUrGo2sZIiGjyj3gX7mCY3uzL
WB2bUOSFz/22OgaANinR5EELHA3pZZCf54Vz1K9ndmtK0xp0j1a7xJShD6TrMdYv
mZ3zH5ViIhW4A3mdcMceh6fy2JLQAiEKF0uPTvcMMz7NlVul0mxyL/+10P7AE/3R
Ehw4fzmm4NDshPDtBOkKH0LsppgXzuItFuQUTpact3JlqTg++bV6onSsrkt1hlY=
=Z7Cm
-----END PGP SIGNATURE-----
Merge tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"There was a lot of clean ups and minor fixes. One of those clean ups
was to the trace_seq code. It also removed the return values to the
trace_seq_*() functions and use trace_seq_has_overflowed() to see if
the buffer filled up or not. This is similar to work being done to
the seq_file code as well in another tree.
Some of the other goodies include:
- Added some "!" (NOT) logic to the tracing filter.
- Fixed the frame pointer logic to the x86_64 mcount trampolines
- Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems.
That is, the ftrace trampoline can be dynamically allocated and be
called directly by functions that only have a single hook to them"
* tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (55 commits)
tracing: Truncated output is better than nothing
tracing: Add additional marks to signal very large time deltas
Documentation: describe trace_buf_size parameter more accurately
tracing: Allow NOT to filter AND and OR clauses
tracing: Add NOT to filtering logic
ftrace/fgraph/x86: Have prepare_ftrace_return() take ip as first parameter
ftrace/x86: Get rid of ftrace_caller_setup
ftrace/x86: Have save_mcount_regs macro also save stack frames if needed
ftrace/x86: Add macro MCOUNT_REG_SIZE for amount of stack used to save mcount regs
ftrace/x86: Simplify save_mcount_regs on getting RIP
ftrace/x86: Have save_mcount_regs store RIP in %rdi for first parameter
ftrace/x86: Rename MCOUNT_SAVE_FRAME and add more detailed comments
ftrace/x86: Move MCOUNT_SAVE_FRAME out of header file
ftrace/x86: Have static tracing also use ftrace_caller_setup
ftrace/x86: Have static function tracing always test for function graph
kprobes: Add IPMODIFY flag to kprobe_ftrace_ops
ftrace, kprobes: Support IPMODIFY flag to find IP modify conflict
kprobes/ftrace: Recover original IP if pre_handler doesn't change it
tracing/trivial: Fix typos and make an int into a bool
tracing: Deletion of an unnecessary check before iput()
...
Currently, blktrace can be started/stopped via its ioctl-based interface
(used by the userspace blktrace tool) or via its ftrace interface. The
function blk_trace_remove_queue(), called each time an "enable" tunable
of the ftrace interface transitions to zero, removes the trace from the
running list, even if no function from the sysfs interface adds it to
such a list. This leads to a null pointer dereference. This commit
changes the blk_trace_remove_queue() function so that it does not remove
the blk_trace from the running list.
v2:
- Now the patch removes the invocation of list_del() instead of
adding an useless if branch, as suggested by Namhyung Kim.
Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The initial reason for this patch is that I noticed that:
if (len > TRACE_BUF_SIZE)
is off by one. In this code, if len == TRACE_BUF_SIZE, then it means we
have truncated the last character off the output string. If we truncate
two or more characters then we exit without printing.
After some discussion, we decided that printing truncated data is better
than not printing at all so we should just use vscnprintf() and remove
the test entirely. Also I have updated memcpy() to copy the NUL char
instead of setting the NUL in a separate step.
Link: http://lkml.kernel.org/r/20141127155752.GA21914@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, function graph tracer prints "!" or "+" just before
function execution time to signal a function overhead, depending
on the time. And some tracers tracing latency also print "!" or
"+" just after time to signal overhead, depending on the interval
between events. Even it is usually enough to do that, we sometimes
need to signal for bigger execution time than 100 micro seconds.
For example, I used function graph tracer to detect if there is
any case that exit_mm() takes too much time. I did following steps
in /sys/kernel/debug/tracing. It was easier to detect very large
excution time with patched kernel than with original kernel.
$ echo exit_mm > set_graph_function
$ echo function_graph > current_tracer
$ echo > trace
$ cat trace_pipe > $LOGFILE
... (do something and terminate logging)
$ grep "\\$" $LOGFILE
3) $ 22082032 us | } /* kernel_map_pages */
3) $ 22082040 us | } /* free_pages_prepare */
3) $ 22082113 us | } /* free_hot_cold_page */
3) $ 22083455 us | } /* free_hot_cold_page_list */
3) $ 22083895 us | } /* release_pages */
3) $ 22177873 us | } /* free_pages_and_swap_cache */
3) $ 22178929 us | } /* unmap_single_vma */
3) $ 22198885 us | } /* unmap_vmas */
3) $ 22206949 us | } /* exit_mmap */
3) $ 22207659 us | } /* mmput */
3) $ 22207793 us | } /* exit_mm */
And then, it was easy to find out that a schedule-out occured by
sub_preempt_count() within kernel_map_pages().
To detect very large function exection time caused by either problematic
function implementation or scheduling issues, this patch can be useful.
Link: http://lkml.kernel.org/r/1416789259-24038-1-git-send-email-byungchul.park@lge.com
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add support to allow not "!" for and (&&) and (||). That is:
!(field1 == X && field2 == Y)
Where the value of the full clause will be notted.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Ted noticed that he could not filter on an event for a bit being cleared.
That's because the filtering logic only tests event fields with a limited
number of comparisons which, for bit logic, only include "&", which can
test if a bit is set, but there's no good way to see if a bit is clear.
This adds a way to do: !(field & 2048)
Which returns true if the bit is not set, and false otherwise.
Note, currently !(field1 == 10 && field2 == 15) is not supported.
That is, the 'not' only works for direct comparisons, not for the
AND and OR logic.
Link: http://lkml.kernel.org/r/20141202021912.GA29096@thunk.org
Link: http://lkml.kernel.org/r/20141202120430.71979060@gandalf.local.home
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Suggested-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Introduce FTRACE_OPS_FL_IPMODIFY to avoid conflict among
ftrace users who may modify regs->ip to change the execution
path. If two or more users modify the regs->ip on the same
function entry, one of them will be broken. So they must add
IPMODIFY flag and make sure that ftrace_set_filter_ip() succeeds.
Note that ftrace doesn't allow ftrace_ops which has IPMODIFY
flag to have notrace hash, and the ftrace_ops must have a
filter hash (so that the ftrace_ops can hook only specific
entries), because it strongly depends on the address and
must be allowed for only few selected functions.
Link: http://lkml.kernel.org/r/20141121102516.11844.27829.stgit@localhost.localdomain
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
[ fixed up some of the comments ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix up a few typos in comments and convert an int into a bool in
update_traceon_count().
Link: http://lkml.kernel.org/r/546DD445.5080108@hitachi.com
Suggested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The seq_buf functions are rather useful outside of tracing. Instead
of having it be dependent on CONFIG_TRACING, move the code into lib/
and allow other users to have access to it even when tracing is not
configured.
The seq_buf utility is similar to the seq_file utility, but instead of
writing sending data back up to userland, it writes it into a buffer
defined at seq_buf_init(). This allows us to send a descriptor around
that writes printf() formatted strings into it that can be retrieved
later.
It is currently used by the tracing facility for such things like trace
events to convert its binary saved data in the ring buffer into an
ASCII human readable context to be displayed in /sys/kernel/debug/trace.
It can also be used for doing NMI prints safely from NMI context into
the seq_buf and retrieved later and dumped to printk() safely. Doing
printk() from an NMI context is dangerous because an NMI can preempt
a current printk() and deadlock on it.
Link: http://lkml.kernel.org/p/20140619213952.058255809@goodmis.org
Tested-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function bstr_printf() from lib/vsprnintf.c is only available if
CONFIG_BINARY_PRINTF is defined. This is due to the only user currently
being the tracing infrastructure, which needs to select this config
when tracing is configured. Until there is another user of the binary
printf formats, this will continue to be the case.
Since seq_buf.c is now lives in lib/ and is compiled even without
tracing, it must encompass its use of bstr_printf() which is used
by seq_buf_printf(). This too is only used by the tracing infrastructure
and is still encapsulated by the CONFIG_BINARY_PRINTF.
Link: http://lkml.kernel.org/r/20141104160222.969013383@goodmis.org
Tested-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add two helper functions; seq_buf_get_buf() and seq_buf_commit() that
are used by seq_buf_path(). This makes the code similar to the
seq_file: seq_path() function, and will help to be able to consolidate
the functions between seq_file and trace_seq.
Link: http://lkml.kernel.org/r/20141104160222.644881406@goodmis.org
Link: http://lkml.kernel.org/r/20141114011412.977571447@goodmis.org
Tested-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently seq_buf is full when all but one byte of the buffer is
filled. Change it so that the seq_buf is full when all of the
buffer is filled.
Some of the functions would fill the buffer completely and report
everything was fine. This was inconsistent with the max of size - 1.
Changing this to be max of size makes all functions consistent.
Link: http://lkml.kernel.org/r/20141104160222.502133196@goodmis.org
Link: http://lkml.kernel.org/r/20141114011412.811957882@goodmis.org
Tested-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a seq_buf_can_fit() helper function that removes the possible mistakes
of comparing the seq_buf length plus added data compared to the size of
the buffer.
Link: http://lkml.kernel.org/r/20141118164025.GL23958@pathway.suse.cz
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
To be really paranoid about writing out of bound data in
trace_printk_seq(), add another check of len compared to size.
Link: http://lkml.kernel.org/r/20141119144004.GB2332@dhcp128.suse.cz
Suggested-by: Petr Mladek <pmladek@suse.cz>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As the seq_buf->len will soon be +1 size when there's an overflow, we
must use trace_seq_used() or seq_buf_used() methods to get the real
length. This will prevent buffer overflow issues if just the len
of the seq_buf descriptor is used to copy memory.
Link: http://lkml.kernel.org/r/20141114121911.09ba3d38@gandalf.local.home
Reported-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracing_fill_pipe_page() logic is a little confusing with the
use of count saving the seq.len and reusing it.
Instead of subtracting a number that is calculated from the saved
value of the seq.len from seq.len, just save the seq.len at the start
and if we need to reset it, just assign it again.
When the seq_buf overflow is len == size + 1, the current logic will
break. Changing it to use a saved length for resetting back to the
original value is more robust and will work when we change the way
seq_buf sets the overflow.
Link: http://lkml.kernel.org/r/20141118161546.GJ23958@pathway.suse.cz
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Rewrite seq_buf_path() like it is done in seq_path() and allow
it to accept any escape character instead of just "\n".
Making seq_buf_path() like seq_path() will help prevent problems
when converting seq_file to use the seq_buf logic.
Link: http://lkml.kernel.org/r/20141104160222.048795666@goodmis.org
Link: http://lkml.kernel.org/r/20141114011412.338523371@goodmis.org
Tested-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Create a seq_buf layer that trace_seq sits on. The seq_buf will not
be limited to page size. This will allow other usages of seq_buf
instead of a hard set PAGE_SIZE one that trace_seq has.
Link: http://lkml.kernel.org/r/20141104160221.864997179@goodmis.org
Link: http://lkml.kernel.org/r/20141114011412.170377300@goodmis.org
Tested-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The iput() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Link: http://lkml.kernel.org/r/5468F875.7080907@users.sourceforge.net
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the trace_seq of ftrace_raw_output_prep() is full this function
returns TRACE_TYPE_PARTIAL_LINE, otherwise it returns zero.
The problem is that TRACE_TYPE_PARTIAL_LINE happens to be zero!
The thing is, the caller of ftrace_raw_output_prep() expects a
success to be zero. Change that to expect it to be
TRACE_TYPE_HANDLED.
Link: http://lkml.kernel.org/r/20141114112522.GA2988@dhcp128.suse.cz
Reminded-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_seq_printf() and friends are used to store strings into a buffer
that can be passed around from function to function. If the trace_seq buffer
fills up, it will not print any more. The return values were somewhat
inconsistant and using trace_seq_has_overflowed() was a better way to know
if the write to the trace_seq buffer succeeded or not.
Now that all users have removed reading the return value of the printf()
type functions, they can safely return void and keep future users of them
from reading the inconsistent values as well.
Link: http://lkml.kernel.org/r/20141114011411.992510720@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The functions trace_seq_printf() and friends will not be returning values
soon and will be void functions. To know if they succeeded or not, the
functions trace_seq_has_overflowed() and trace_handle_return() should be
used instead.
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The functions trace_seq_printf() and friends will soon no longer have
return values. Using trace_seq_has_overflowed() and trace_handle_return()
should be used instead.
Link: http://lkml.kernel.org/r/20141114011411.693008134@goodmis.org
Link: http://lkml.kernel.org/r/20141115050602.333705855@goodmis.org
Reviewed-by: Masami Hiramatsu <masami.hiramatu.pt@hitachi.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The functions trace_seq_printf() and friends will soon not have a return
value and will only be a void function. Use trace_seq_has_overflowed()
instead to know if the trace_seq operations succeeded or not.
Link: http://lkml.kernel.org/r/20141114011411.530216306@goodmis.org
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The return values for trace_seq_printf() and friends are going to be
removed and they will become void functions. The mmio tracer checked
their return and even did so incorrectly.
Some of the funtions which returned the values were never checked
themselves. Removing all the checks simplifies the code.
Use trace_seq_has_overflowed() and trace_handle_return() where
necessary instead.
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Instead of checking the return value of trace_seq_printf() and friends
for overflowing of the buffer, use the trace_seq_has_overflowed() helper
function.
This cleans up the code quite a bit and also takes us a step closer to
changing the return values of trace_seq_printf() and friends to void.
Link: http://lkml.kernel.org/r/20141114011411.181812785@goodmis.org
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Instead of doing individual checks all over the place that makes the code
very messy. Just check trace_seq_has_overflowed() at the end or in
strategic places.
This makes the code much cleaner and also helps with getting closer
to removing the return values of trace_seq_printf() and friends.
Link: http://lkml.kernel.org/r/20141114011410.987913836@goodmis.org
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The branch tracer should not be checking the trace_seq_printf() return value
as that will soon be void. There's a new trace_handle_return() helper function
that will return TRACE_TYPE_PARTIAL_LINE if the trace_seq overflowed
and TRACE_TYPE_HANDLED otherwise.
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove checking the return value of all trace_seq_puts(). It was wrong
anyway as only the last return value mattered. But as the trace_seq_puts()
is going to be a void function in the future, we should not be checking
the return value of it anyway.
Just return !trace_seq_has_overflowed() instead.
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Checking the return code of every trace_seq_printf() operation and having
to return early if it overflowed makes the code messy.
Using the new trace_seq_has_overflowed() and trace_handle_return() functions
allows us to clean up the code.
In the future, trace_seq_printf() and friends will be turning into void
functions and not returning a value. The trace_seq_has_overflowed() is to
be used instead. This cleanup allows that change to take place.
Cc: Jens Axboe <axboe@fb.com>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding a trace_seq_has_overflowed() which returns true if the trace_seq
had too much written into it allows us to simplify the code.
Instead of checking the return value of every call to trace_seq_printf()
and friends, they can all be called normally, and at the end we can
return !trace_seq_has_overflowed() instead.
Several functions also return TRACE_TYPE_PARTIAL_LINE when the trace_seq
overflowed and TRACE_TYPE_HANDLED otherwise. Another helper function
was created called trace_handle_return() which takes a trace_seq and
returns these enums. Using this helper function also simplifies the
code.
This change also makes it possible to remove the return values of
trace_seq_printf() and friends. They should instead just be
void functions.
Link: http://lkml.kernel.org/r/20141114011410.365183157@goodmis.org
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In trace_seq_bitmask() it calls bitmap_scnprintf() not from the current
position of the trace_seq buffer (s->buffer + s->len), but instead from
the beginning of the buffer (s->buffer).
Luckily, the only user of this "ipi_raise tracepoint" uses it as the
first parameter, and as such, the start of the temp buffer in
include/trace/ftrace.h (see __get_bitmask()).
Reported-by: Petr Mladek <pmladek@suse.cz>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Stack traces that happen from function tracing check if the address
on the stack is a __kernel_text_address(). That is, is the address
kernel code. This calls core_kernel_text() which returns true
if the address is part of the builtin kernel code. It also calls
is_module_text_address() which returns true if the address belongs
to module code.
But what is missing is ftrace dynamically allocated trampolines.
These trampolines are allocated for individual ftrace_ops that
call the ftrace_ops callback functions directly. But if they do a
stack trace, the code checking the stack wont detect them as they
are neither core kernel code nor module address space.
Adding another field to ftrace_ops that also stores the size of
the trampoline assigned to it we can create a new function called
is_ftrace_trampoline() that returns true if the address is a
dynamically allocate ftrace trampoline. Note, it ignores trampolines
that are not dynamically allocated as they will return true with
the core_kernel_text() function.
Link: http://lkml.kernel.org/r/20141119034829.497125839@goodmis.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function probe counting for traceon and traceoff suffered a race
condition where if the probe was executing on two or more CPUs at the
same time, it could decrement the counter by more than one when
disabling (or enabling) the tracer only once.
The way the traceon and traceoff probes are suppose to work is that
they disable (or enable) tracing once per count. If a user were to
echo 'schedule:traceoff:3' into set_ftrace_filter, then when the
schedule function was called, it would disable tracing. But the count
should only be decremented once (to 2). Then if the user enabled tracing
again (via tracing_on file), the next call to schedule would disable
tracing again and the count would be decremented to 1.
But if multiple CPUS called schedule at the same time, it is possible
that the count would be decremented more than once because of the
simple "count--" used.
By reading the count into a local variable and using memory barriers
we can guarantee that the count would only be decremented once per
disable (or enable).
The stack trace probe had a similar race, but here the stack trace will
decrement for each time it is called. But this had the read-modify-
write race, where it could stack trace more than the number of times
that was specified. This case we use a cmpxchg to stack trace only the
number of times specified.
The dump probes can still use the old "update_count()" function as
they only run once, and that is controlled by the dump logic
itself.
Link: http://lkml.kernel.org/r/20141118134643.4b550ee4@gandalf.local.home
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Usually, "msecs" notation means milli-seconds, and "usecs" notation
means micro-seconds. Since the unit used in the code is micro-seconds,
the notation should be replaced from msecs to usecs.
Link: http://lkml.kernel.org/r/1415171926-9782-2-git-send-email-byungchul.park@lge.com
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On the function_graph tracer, the print_graph_irq() function prints a
trace line with the flag ==========> on an irq handler entry, and the
flag <========== on an irq handler return.
But when the latency-format is enable, it is not printing the
latency-format flags, causing the following error in the trace output:
0) ==========> |
0) d... | smp_apic_timer_interrupt() {
This patch fixes this issue by printing the latency-format flags when
it is enable.
Link: http://lkml.kernel.org/r/7c2e226dac20c940b6242178fab7f0e3c9b5ce58.1415233316.git.bristot@redhat.com
Reviewed-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Printing a single character to a seqfile might as well be done with
seq_putc instead of seq_puts; this avoids a strlen() call and a memory
access. It also shaves another few bytes off the generated code.
Link: http://lkml.kernel.org/r/1415479332-25944-4-git-send-email-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Consecutive seq_puts calls with literal strings can be merged to a
single call. This reduces the size of the generated code, and can also
lead to slight .rodata reduction (because of fewer nul and padding
bytes). It should also shave a off a few clock cycles.
Link: http://lkml.kernel.org/r/1415479332-25944-3-git-send-email-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Using seq_printf to print a simple string or a single character is a
lot more expensive than it needs to be, since seq_puts and seq_putc
exist.
These patches do
seq_printf(m, s) -> seq_puts(m, s)
seq_printf(m, "%s", s) -> seq_puts(m, s)
seq_printf(m, "%c", c) -> seq_putc(m, c)
Subsequent patches will simplify further.
Link: http://lkml.kernel.org/r/1415479332-25944-2-git-send-email-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently kdb's ftdump command will livelock by constantly printk'ing
the empty string at KERN_EMERG level if it run when the ftrace system is
not in use. This occurs because trace_empty() never returns false when
the ring buffers are left at the start of a non-consuming read [launched
by ring_buffer_read_start()].
This patch changes the loop exit condition to use the result of
trace_find_next_entry_inc(). Effectively this switches the non-consuming
kdb dumper to follow the approach of the non-consuming userspace
interface [s_next()] rather than the consuming ftrace_dump().
Link: http://lkml.kernel.org/r/1415277716-19419-3-git-send-email-daniel.thompson@linaro.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently kdb's ftdump command unconditionally crashes due to a null
pointer de-reference whenever the command is run. This in turn causes
the kernel to panic.
The abridged stacktrace (gathered with ARCH=arm) is:
--- cut here ---
[<c09535ac>] (panic) from [<c02132dc>] (die+0x264/0x440)
[<c02132dc>] (die) from [<c0952eb8>]
(__do_kernel_fault.part.11+0x74/0x84)
[<c0952eb8>] (__do_kernel_fault.part.11) from [<c021f954>]
(do_page_fault+0x1d0/0x3c4)
[<c021f954>] (do_page_fault) from [<c020846c>] (do_DataAbort+0x48/0xac)
[<c020846c>] (do_DataAbort) from [<c0213c58>] (__dabt_svc+0x38/0x60)
Exception stack(0xc0deba88 to 0xc0debad0)
ba80: e8c29180 00000001 e9854304 e9854300 c0f567d8
c0df2580
baa0: 00000000 00000000 00000000 c0f117b8 c0e3a3c0 c0debb0c 00000000
c0debad0
bac0: 0000672e c02f4d60 60000193 ffffffff
[<c0213c58>] (__dabt_svc) from [<c02f4d60>] (kdb_ftdump+0x1e4/0x3d8)
[<c02f4d60>] (kdb_ftdump) from [<c02ce328>] (kdb_parse+0x2b8/0x698)
[<c02ce328>] (kdb_parse) from [<c02ceef0>] (kdb_main_loop+0x52c/0x784)
[<c02ceef0>] (kdb_main_loop) from [<c02d1b0c>] (kdb_stub+0x238/0x490)
--- cut here ---
The NULL deref occurs due to the initialized use of struct trace_iter's
buffer_iter member.
This is a regression, albeit a fairly elderly one. It was introduced
by commit 6d158a813e ("tracing: Remove NR_CPUS array from
trace_iterator").
This patch solves this by providing a collection of ring_buffer_iter(s)
and using this to initialize buffer_iter. Note that static allocation
is used solely because the trace_iter itself is also static allocated.
Static allocation also means that we have to NULL-ify the pointer during
cleanup to avoid use-after-free problems.
Link: http://lkml.kernel.org/r/1415277716-19419-2-git-send-email-daniel.thompson@linaro.org
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
According to the documentation, adding "traceoff_on_warning" to the boot
command line should be enough to enable the feature. But right now it is
necessary to specify "traceoff_on_warning=". Along with fixing that, also
verify if the value passed, if any, is either "0" or "off".
Link: http://lkml.kernel.org/r/20141112231400.GL12281@uudg.org
Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the new logic, if only a single user of ftrace function hooks is
used, it will get its own trampoline assigned to it.
The problem is that the control_ops is an indirect ops that perf ops
uses. What that means is that when perf registers its ops with
register_ftrace_function(), it has the CONTROL flag set and gets added
to the control list instead of the global ftrace list. The control_ops
gets added to that instead and the mcount trampoline calls the control_ops
function. The control_ops function will iterate the control list and
call the ops functions that are attached to it.
But currently the trampoline is added to the perf ops and not the
control ops, and when ftrace tries to find a trampoline hook for it,
it fails to find one and gives the following splat:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 10133 at kernel/trace/ftrace.c:2033 ftrace_get_addr_new+0x6f/0xc0()
Modules linked in: [...]
CPU: 0 PID: 10133 Comm: perf Tainted: P 3.18.0-rc1-test+ #388
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
00000000000007f1 ffff8800c2643bc8 ffffffff814fca6e ffff88011ea0ed01
0000000000000000 ffff8800c2643c08 ffffffff81041ffd 0000000000000000
ffffffff810c388c ffffffff81a5a350 ffff880119b00000 ffffffff810001c8
Call Trace:
[<ffffffff814fca6e>] dump_stack+0x46/0x58
[<ffffffff81041ffd>] warn_slowpath_common+0x81/0x9b
[<ffffffff810c388c>] ? ftrace_get_addr_new+0x6f/0xc0
[<ffffffff810001c8>] ? 0xffffffff810001c8
[<ffffffff81042031>] warn_slowpath_null+0x1a/0x1c
[<ffffffff810c388c>] ftrace_get_addr_new+0x6f/0xc0
[<ffffffff8102e938>] ftrace_replace_code+0xd6/0x334
[<ffffffff810c4116>] ftrace_modify_all_code+0x41/0xc5
[<ffffffff8102eba6>] arch_ftrace_update_code+0x10/0x19
[<ffffffff810c293c>] ftrace_run_update_code+0x21/0x42
[<ffffffff810c298f>] ftrace_startup_enable+0x32/0x34
[<ffffffff810c3049>] ftrace_startup+0x14e/0x15a
[<ffffffff810c307c>] register_ftrace_function+0x27/0x40
[<ffffffff810dc118>] perf_ftrace_event_register+0x3e/0xee
[<ffffffff810dbfbe>] perf_trace_init+0x29d/0x2a9
[<ffffffff810eb422>] perf_tp_event_init+0x27/0x3a
[<ffffffff810f18bc>] perf_init_event+0x9e/0xed
[<ffffffff810f1ba4>] perf_event_alloc+0x299/0x330
[<ffffffff810f236b>] SYSC_perf_event_open+0x3ee/0x816
[<ffffffff8115a066>] ? mntput+0x2d/0x2f
[<ffffffff81142b00>] ? __fput+0xa7/0x1b2
[<ffffffff81091300>] ? do_gettimeofday+0x22/0x3a
[<ffffffff810f279c>] SyS_perf_event_open+0x9/0xb
[<ffffffff81502a92>] system_call_fastpath+0x12/0x17
---[ end trace 81a53565150e4982 ]---
Bad trampoline accounting at: ffffffff810001c8 (run_init_process+0x0/0x2d) (10000001)
Update the control_ops trampoline instead of the perf ops one.
Reported-by: lkp@01.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The only code that references tracing_sched_switch_trace() and
tracing_sched_wakeup_trace() is the wakeup latency tracer. Those
two functions use to belong to the sched_switch tracer which has
long been removed. These functions were left behind because the
wakeup latency tracer used them. But since the wakeup latency tracer
is the only one to use them, they should be static functions inside
that code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
After the previous patch it is clear that "tracer_enabled" can never be
true, we can remove the "if (tracer_enabled)" code in probe_sched_switch()
and probe_sched_wakeup(). Plus we can obviously remove tracer_enabled,
ctx_trace, and sched_stopped as well.
Link: http://lkml.kernel.org/p/20140723193503.GA30217@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_{start,stop}_sched_switch_record() have no callers since
87d80de280 "tracing: Remove obsolete sched_switch tracer".
The last caller of tracing_sched_switch_assign_trace() was removed
by 30dbb20e68 "tracing: Remove boot tracer".
Link: http://lkml.kernel.org/p/20140723193501.GA30214@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the introduction of the dynamic trampolines, it is useful that if
things go wrong that ftrace_bug() produces more information about what
the current state is. This can help debug issues that may arise.
Ftrace has lots of checks to make sure that the state of the system it
touchs is exactly what it expects it to be. When it detects an abnormality
it calls ftrace_bug() and disables itself to prevent any further damage.
It is crucial that ftrace_bug() produces sufficient information that
can be used to debug the situation.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Borislav Petkov <bp@suse.de>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the static ftrace_ops (like function tracer) enables tracing, and it
is the only callback that is referencing a function, a trampoline is
dynamically allocated to the function that calls the callback directly
instead of calling a loop function that iterates over all the registered
ftrace ops (if more than one ops is registered).
But when it comes to dynamically allocated ftrace_ops, where they may be
freed, on a CONFIG_PREEMPT kernel there's no way to know when it is safe
to free the trampoline. If a task was preempted while executing on the
trampoline, there's currently no way to know when it will be off that
trampoline.
But this is not true when it comes to !CONFIG_PREEMPT. The current method
of calling schedule_on_each_cpu() will force tasks off the trampoline,
becaues they can not schedule while on it (kernel preemption is not
configured). That means it is safe to free a dynamically allocated
ftrace ops trampoline when CONFIG_PREEMPT is not configured.
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch introduces several new flags to collect kdb commands into
groups (later allowing them to be optionally disabled).
This follows similar prior art to enable/disable magic sysrq
commands.
The commands have been categorized as follows:
Always on: go (w/o args), env, set, help, ?, cpu (w/o args), sr,
dmesg, disable_nmi, defcmd, summary, grephelp
Mem read: md, mdr, mdp, mds, ef, bt (with args), per_cpu
Mem write: mm
Reg read: rd
Reg write: go (with args), rm
Inspect: bt (w/o args), btp, bta, btc, btt, ps, pid, lsmod
Flow ctrl: bp, bl, bph, bc, be, bd, ss
Signal: kill
Reboot: reboot
All: cpu, kgdb, (and all of the above), nmi_console
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Since we now treat KDB_REPEAT_* as flags, there is no need to
pass KDB_REPEAT_NONE. It's just the default behaviour when no
flags are specified.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
We're about to add more options for commands behaviour, so let's give
a more generic name to the low-level kdb command registration function.
There are just various renames, no functional changes.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
If the read loop in trace_buffers_splice_read() keeps failing due to
memory allocation failures without reading even a single page then this
function will keep busy looping.
Remove the risk for that by exiting the function if memory allocation
failures are seen.
Link: http://lkml.kernel.org/r/1415309167-2373-2-git-send-email-rabin@rab.in
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On a !PREEMPT kernel, attempting to use trace-cmd results in a soft
lockup:
# trace-cmd record -e raw_syscalls:* -F false
NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61]
...
Call Trace:
[<ffffffff8105b580>] ? __wake_up_common+0x90/0x90
[<ffffffff81092e25>] wait_on_pipe+0x35/0x40
[<ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0
[<ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0
[<ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40
[<ffffffff810dc87b>] ? do_read_fault+0x21b/0x290
[<ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0
[<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80
[<ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60
[<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80
[<ffffffff8112415d>] do_splice_to+0x6d/0x90
[<ffffffff81126971>] SyS_splice+0x7c1/0x800
[<ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8
The problem is this: tracing_buffers_splice_read() calls
ring_buffer_wait() to wait for data in the ring buffers. The buffers
are not empty so ring_buffer_wait() returns immediately. But
tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1,
meaning it only wants to read a full page. When the full page is not
available, tracing_buffers_splice_read() tries to wait again with
ring_buffer_wait(), which again returns immediately, and so on.
Fix this by adding a "full" argument to ring_buffer_wait() which will
make ring_buffer_wait() wait until the writer has left the reader's
page, i.e. until full-page reads will succeed.
Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in
Cc: stable@vger.kernel.org # 3.16+
Fixes: b1169cc69b ("tracing: Remove mock up poll wait function")
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The file /sys/kernel/debug/tracing/eneabled_functions is used to debug
ftrace function hooks. Add to the output what function is being called
by the trampoline if the arch supports it.
Add support for this feature in x86_64.
Cc: H. Peter Anvin <hpa@linux.intel.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The current method of handling multiple function callbacks is to register
a list function callback that calls all the other callbacks based on
their hash tables and compare it to the function that the callback was
called on. But this is very inefficient.
For example, if you are tracing all functions in the kernel and then
add a kprobe to a function such that the kprobe uses ftrace, the
mcount trampoline will switch from calling the function trace callback
to calling the list callback that will iterate over all registered
ftrace_ops (in this case, the function tracer and the kprobes callback).
That means for every function being traced it checks the hash of the
ftrace_ops for function tracing and kprobes, even though the kprobes
is only set at a single function. The kprobes ftrace_ops is checked
for every function being traced!
Instead of calling the list function for functions that are only being
traced by a single callback, we can call a dynamically allocated
trampoline that calls the callback directly. The function graph tracer
already uses a direct call trampoline when it is being traced by itself
but it is not dynamically allocated. It's trampoline is static in the
kernel core. The infrastructure that called the function graph trampoline
can also be used to call a dynamically allocated one.
For now, only ftrace_ops that are not dynamically allocated can have
a trampoline. That is, users such as function tracer or stack tracer.
kprobes and perf allocate their ftrace_ops, and until there's a safe
way to free the trampoline, it can not be used. The dynamically allocated
ftrace_ops may, although, use the trampoline if the kernel is not
compiled with CONFIG_PREEMPT. But that will come later.
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ARM has some private syscalls (for example, set_tls(2)) which lie
outside the range of NR_syscalls. If any of these are called while
syscall tracing is being performed, out-of-bounds array access will
occur in the ftrace and perf sys_{enter,exit} handlers.
# trace-cmd record -e raw_syscalls:* true && trace-cmd report
...
true-653 [000] 384.675777: sys_enter: NR 192 (0, 1000, 3, 4000022, ffffffff, 0)
true-653 [000] 384.675812: sys_exit: NR 192 = 1995915264
true-653 [000] 384.675971: sys_enter: NR 983045 (76f74480, 76f74000, 76f74b28, 76f74480, 76f76f74, 1)
true-653 [000] 384.675988: sys_exit: NR 983045 = 0
...
# trace-cmd record -e syscalls:* true
[ 17.289329] Unable to handle kernel paging request at virtual address aaaaaace
[ 17.289590] pgd = 9e71c000
[ 17.289696] [aaaaaace] *pgd=00000000
[ 17.289985] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[ 17.290169] Modules linked in:
[ 17.290391] CPU: 0 PID: 704 Comm: true Not tainted 3.18.0-rc2+ #21
[ 17.290585] task: 9f4dab00 ti: 9e710000 task.ti: 9e710000
[ 17.290747] PC is at ftrace_syscall_enter+0x48/0x1f8
[ 17.290866] LR is at syscall_trace_enter+0x124/0x184
Fix this by ignoring out-of-NR_syscalls-bounds syscall numbers.
Commit cd0980fc8a "tracing: Check invalid syscall nr while tracing syscalls"
added the check for less than zero, but it should have also checked
for greater than NR_syscalls.
Link: http://lkml.kernel.org/p/1414620418-29472-1-git-send-email-rabin@rab.in
Fixes: cd0980fc8a "tracing: Check invalid syscall nr while tracing syscalls"
Cc: stable@vger.kernel.org # 2.6.33+
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When modifying code, ftrace has several checks to make sure things
are being done correctly. One of them is to make sure any code it
modifies is exactly what it expects it to be before it modifies it.
In order to do so with the new trampoline logic, it must be able
to find out what trampoline a function is hooked to in order to
see if the code that hooks to it is what's expected.
The logic to find the trampoline from a record (accounting descriptor
for a function that is hooked) needs to only look at the "old_hash"
of an ops that is being modified. The old_hash is the list of function
an ops is hooked to before its update. Since a record would only be
pointing to an ops that is being modified if it was already hooked
before.
Currently, it can pick a modified ops based on its new functions it
will be hooked to, and this picks the wrong trampoline and causes
the check to fail, disabling ftrace.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace: squash into ordering of ops for modification
The code that checks for trampolines when modifying function hooks
tests against a modified ops "old_hash". But the ops old_hash pointer
is not being updated before the changes are made, making it possible
to not find the right hash to the callback and possibly causing
ftrace to break in accounting and disable itself.
Have the ops set its old_hash before the modifying takes place.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave
Hansen)
- Various sched/idle refinements for better idle handling (Nicolas
Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot)
- sched/numa updates and optimizations (Rik van Riel)
- sysbench speedup (Vincent Guittot)
- capacity calculation cleanups/refactoring (Vincent Guittot)
- Various cleanups to thread group iteration (Oleg Nesterov)
- Double-rq-lock removal optimization and various refactorings
(Kirill Tkhai)
- various sched/deadline fixes
... and lots of other changes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
sched/dl: Use dl_bw_of() under rcu_read_lock_sched()
sched/fair: Delete resched_cpu() from idle_balance()
sched, time: Fix build error with 64 bit cputime_t on 32 bit systems
sched: Improve sysbench performance by fixing spurious active migration
sched/x86: Fix up typo in topology detection
x86, sched: Add new topology for multi-NUMA-node CPUs
sched/rt: Use resched_curr() in task_tick_rt()
sched: Use rq->rd in sched_setaffinity() under RCU read lock
sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask'
sched: Use dl_bw_of() under RCU read lock
sched/fair: Remove duplicate code from can_migrate_task()
sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW
sched: print_rq(): Don't use tasklist_lock
sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock()
sched: Fix the task-group check in tg_has_rt_tasks()
sched/fair: Leverage the idle state info when choosing the "idlest" cpu
sched: Let the scheduler see CPU idle states
sched/deadline: Fix inter- exclusive cpusets migrations
sched/deadline: Clear dl_entity params when setscheduling to different class
sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault()
...
code screem nasty warnings:
WARNING: CPU: 0 PID: 91 at kernel/sched/core.c:7253 __might_sleep+0x9a/0x378()
do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff8d79b511>] event_test_thread+0x48/0x93
Modules linked in:
CPU: 0 PID: 91 Comm: test-events Not tainted 3.17.0-rc7-00109-g2f85d18 #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
0000000000000000 ffff880010ec3c80 ffffffff8c696943 ffff880010ec3cb8
ffffffff8be7cae5 ffffffff8bead236 0000000000000001 ffff88001161fa01
0000000000000001 0000000000000000 ffff880010ec3d20 ffffffff8be7cb46
Call Trace:
[<ffffffff8c696943>] dump_stack+0x19/0x1b
[<ffffffff8be7cae5>] warn_slowpath_common+0x8f/0xa8
[<ffffffff8bead236>] ? __might_sleep+0x9a/0x378
[<ffffffff8be7cb46>] warn_slowpath_fmt+0x48/0x50
[<ffffffff8be0dd55>] ? sched_clock+0x9/0xd
[<ffffffff8d79b511>] ? event_test_thread+0x48/0x93
[<ffffffff8d79b511>] ? event_test_thread+0x48/0x93
[<ffffffff8bead236>] __might_sleep+0x9a/0x378
[<ffffffff8c6a0227>] down_read+0x26/0x98
[<ffffffff8be8f503>] exit_signals+0x27/0x1c2
[<ffffffff8be7fedd>] do_exit+0x193/0x10bd
[<ffffffff8bfd1969>] ? kfree+0x4a0/0x4d7
[<ffffffff8d79b4c9>] ? event_trace_self_tests+0x6d7/0x6d7
[<ffffffff8d79b4c9>] ? event_trace_self_tests+0x6d7/0x6d7
[<ffffffff8bea4b65>] kthread+0x156/0x156
[<ffffffff8c69c0f8>] ? wait_for_common+0x3e/0x224
[<ffffffff8bea4a0f>] ? insert_kthread_work+0xe7/0xe7
[<ffffffff8c6a353a>] ret_from_fork+0x7a/0xb0
[<ffffffff8bea4a0f>] ? insert_kthread_work+0xe7/0xe7
---[ end trace 14d02ef17adbc114 ]---
These are triggered by some self tests that run at start up when
configure in. Although the code is technically correct, they are a little
sloppy and not very robust. They work now because it runs at boot up
and the tests do not call anything that might trigger a spurious
wake up. But that doesn't mean those tests wont change in the future.
It's best to clean them now to make sure the tests used to test the
internal workings of the system don't cause breakage themselves.
This also quiets the warnings made by the new checks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUNrcAAAoJEKQekfcNnQGu+oYH/3NaLEKOwQU+x0aL/rfSFB86
qtIq3X4iHGekGjrlN38N2Z36izI9AoYuGrWYReMFy1VcvnRxPAl1mc0y0dZfdW/C
KRLwKTAu0t78Ab8vzyXVDxS+Bs/zEi6V/8HykBFbCthiDz5IbTvxCoeS19O/X9CU
ptVKllUlywjKQD5UMiJwk7eOB5GspOeBgNu9MOh61ZfbYBVsl1hPqmD0gEaSH2Me
wLyDlIyc0P9dfeYeaqYblkiBaXLk2urZDU2Enffi1aueEwwWuN5x+DPGc6d6nGQW
fnworqoiYzz+maQoASwaLdCfJAP3cX5Ye7qWQk7QEtp4Ypdh5j7EacAf9pKEJg8=
=goKt
-----END PGP SIGNATURE-----
Merge tag 'trace-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Seems that Peter Zijlstra added a new check that is making old code
scream nasty warnings:
WARNING: CPU: 0 PID: 91 at kernel/sched/core.c:7253 __might_sleep+0x9a/0x378()
do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff8d79b511>] event_test_thread+0x48/0x93
Call Trace:
__might_sleep+0x9a/0x378
down_read+0x26/0x98
exit_signals+0x27/0x1c2
do_exit+0x193/0x10bd
kthread+0x156/0x156
ret_from_fork+0x7a/0xb0
These are triggered by some self tests that run at start up when
configure in. Although the code is technically correct, they are a
little sloppy and not very robust. They work now because it runs at
boot up and the tests do not call anything that might trigger a
spurious wake up. But that doesn't mean those tests wont change in
the future.
It's best to clean them now to make sure the tests used to test the
internal workings of the system don't cause breakage themselves.
This also quiets the warnings made by the new checks"
* tag 'trace-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Clean up scheduling in trace_wakeup_test_thread()
tracing: Robustify wait loop
of the trampoline logic.
The trampoline logic of 3.17 required a descriptor for every function
that is registered to be traced and uses a trampoline. Currently,
only the function graph tracer uses a trampoline, but if you were
to trace all 32,000 (give or take a few thousand) functions with the
function graph tracer, it would create 32,000 descriptors to let us
know that there's a trampoline associated with it. This takes up a bit
of memory when there's a better way to do it.
The redesign now reuses the ftrace_ops' (what registers the function graph
tracer) hash tables. The hash tables tell ftrace what the tracer
wants to trace or doesn't want to trace. There's two of them: one
that tells us what to trace, the other tells us what not to trace.
If the first one is empty, it means all functions should be traced,
otherwise only the ones that are listed should be. The second hash table
tells us what not to trace, and if it is empty, all functions may be
traced, and if there's any listed, then those should not be traced
even if they exist in the first hash table.
It took a bit of massaging, but now these hashes can be used to
keep track of what has a trampoline and what does not, and allows
the ftrace accounting to work. Now we can trace all functions when using
the function graph trampoline, and avoid needing to create any special
descriptors to hold all the functions that are being traced.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUMwp6AAoJEKQekfcNnQGuIoAIAIsqvTYAnULyzKKCweEZYUfb
XJzz6cN5FPGSXkoeda1ZvnfOlHjFRrWNXzXMB0jZYR2hU++pe3xjtghaNzvbRcyV
wlwDUTsnz235OcOuFEspIwBamhtah96Coiwf/2z/2q6srXlHd/1TrqXB+Fpj1tEK
BkAViGDUEdq/eLZX7nGen36cTb5gpNqV9NjY1CVAK6bSkU/xXk/ArqFy1qy0MPnc
z/9bXdIf+Z6VnG/IzwRc2rwiMFuD1+lpjLuHEqagoHp1D4teCjWPSJl1EKCVAS40
GaCOTUZi92zIVgx8Bb28TglSla9MN65CO3E8dw6hlXUIsNz1p0eavpctnC6ac/Y=
=vDpP
-----END PGP SIGNATURE-----
Merge tag 'trace-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This set has a few minor updates, but the big change is the redesign
of the trampoline logic.
The trampoline logic of 3.17 required a descriptor for every function
that is registered to be traced and uses a trampoline. Currently,
only the function graph tracer uses a trampoline, but if you were to
trace all 32,000 (give or take a few thousand) functions with the
function graph tracer, it would create 32,000 descriptors to let us
know that there's a trampoline associated with it. This takes up a
bit of memory when there's a better way to do it.
The redesign now reuses the ftrace_ops' (what registers the function
graph tracer) hash tables. The hash tables tell ftrace what the
tracer wants to trace or doesn't want to trace. There's two of them:
one that tells us what to trace, the other tells us what not to trace.
If the first one is empty, it means all functions should be traced,
otherwise only the ones that are listed should be. The second hash
table tells us what not to trace, and if it is empty, all functions
may be traced, and if there's any listed, then those should not be
traced even if they exist in the first hash table.
It took a bit of massaging, but now these hashes can be used to keep
track of what has a trampoline and what does not, and allows the
ftrace accounting to work. Now we can trace all functions when using
the function graph trampoline, and avoid needing to create any special
descriptors to hold all the functions that are being traced"
* tag 'trace-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Only disable ftrace_enabled to test buffer in selftest
ftrace: Add sanity check when unregistering last ftrace_ops
kernel: trace_syscalls: Replace rcu_assign_pointer() with RCU_INIT_POINTER()
tracing: generate RCU warnings even when tracepoints are disabled
ftrace: Replace tramp_hash with old_*_hash to save space
ftrace: Annotate the ops operation on update
ftrace: Grab any ops for a rec for enabled_functions output
ftrace: Remove freeing of old_hash from ftrace_hash_move()
ftrace: Set callback to ftrace_stub when no ops are registered
ftrace: Add helper function ftrace_ops_get_func()
ftrace: Add separate function for non recursive callbacks
Peter's new debugging tool triggers when tasks exit with !TASK_RUNNING.
The code in trace_wakeup_test_thread() also has a single schedule() call
that should be encompassed by a loop.
This cleans up the code a little to make it a bit more robust and
also makes the return exit properly with TASK_RUNNING.
Link: http://lkml.kernel.org/p/20141008135216.76142204@gandalf.local.home
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra <peterz@infreadead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The pending nested sleep debugging triggered on the potential stale
TASK_INTERRUPTIBLE in this code.
While there, fix the loop such that we won't revert to a while(1)
yield() 'spin' loop if we ever get a spurious wakeup.
And fix the actual issue by properly terminating the 'wait' loop by
setting TASK_RUNNING.
Link: http://lkml.kernel.org/p/20141008165110.GA14547@worktop.programming.kicks-ass.net
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 651e22f270 "ring-buffer: Always reset iterator to reader page"
fixed one bug but in the process caused another one. The reset is to
update the header page, but that fix also changed the way the cached
reads were updated. The cache reads are used to test if an iterator
needs to be updated or not.
A ring buffer iterator, when created, disables writes to the ring buffer
but does not stop other readers or consuming reads from happening.
Although all readers are synchronized via a lock, they are only
synchronized when in the ring buffer functions. Those functions may
be called by any number of readers. The iterator continues down when
its not interrupted by a consuming reader. If a consuming read
occurs, the iterator starts from the beginning of the buffer.
The way the iterator sees that a consuming read has happened since
its last read is by checking the reader "cache". The cache holds the
last counts of the read and the reader page itself.
Commit 651e22f270 changed what was saved by the cache_read when
the rb_iter_reset() occurred, making the iterator never match the cache.
Then if the iterator calls rb_iter_reset(), it will go into an
infinite loop by checking if the cache doesn't match, doing the reset
and retrying, just to see that the cache still doesn't match! Which
should never happen as the reset is suppose to set the cache to the
current value and there's locks that keep a consuming reader from
having access to the data.
Fixes: 651e22f270 "ring-buffer: Always reset iterator to reader page"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tasks get their end of stack set to STACK_END_MAGIC with the
aim to catch stack overruns. Currently this feature does not
apply to init_task. This patch removes this restriction.
Note that a similar patch was posted by Prarit Bhargava
some time ago but was never merged:
http://marc.info/?l=linux-kernel&m=127144305403241&w=2
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: aneesh.kumar@linux.vnet.ibm.com
Cc: dzickus@redhat.com
Cc: bmr@redhat.com
Cc: jcastillo@redhat.com
Cc: jgh@redhat.com
Cc: minchan@kernel.org
Cc: tglx@linutronix.de
Cc: hannes@cmpxchg.org
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Daeseok Youn <daeseok.youn@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1410527779-8133-2-git-send-email-atomlin@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The ftrace_enabled variable is set to zero in the self tests to keep
delayed functions from being traced and messing with the checks. This
only needs to be done when the checks are being performed, otherwise,
if ftrace_enabled is off when calls back to the utility that is being
tested, it can cause errors to happen and the tests can fail with
false positives.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the last ftrace_ops is unregistered, all the function records should
have a zeroed flags value. Make sure that is the case when the last ftrace_ops
is unregistered.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The uses of "rcu_assign_pointer()" are NULLing out the pointers.
According to RCU_INIT_POINTER()'s block comment:
"1. This use of RCU_INIT_POINTER() is NULLing out the pointer"
it is better to use it instead of rcu_assign_pointer() because it has a
smaller overhead.
The following Coccinelle semantic patch was used:
@@
@@
- rcu_assign_pointer
+ RCU_INIT_POINTER
(..., NULL)
Link: http://lkml.kernel.org/p/20140822142822.GA32391@ada
Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Allowing function callbacks to declare their own trampolines requires
that each ftrace_ops that has a trampoline must have some sort of
accounting that keeps track of which ops has a trampoline attached
to a record.
The easy way to solve this was to add a "tramp_hash" that created a
hash entry for every function that a ops uses with a trampoline.
But since we can have literally tens of thousands of functions being
traced, that means we need tens of thousands of descriptors to map
the ops to the function in the hash. This is quite expensive and
can cause enabling and disabling the function graph tracer to take
some time to start and stop. It can take up to several seconds to
disable or enable all functions in the function graph tracer for this
reason.
The better approach albeit more complex, is to keep track of how ops
are being enabled and disabled, and use that along with the counting
of the number of ops attached to records, to determive what ops has
a trampoline attached to a record at enabling and disabling of
tracing.
To do this, the tramp_hash has been replaced with an old_filter_hash
and old_notrace_hash, which get the copy of the ops filter_hash and
notrace_hash respectively. The old hashes is kept until the ops has
been modified or removed and the old hashes are used with the logic
of the accounting to determine the ops that have the trampoline of
a record. The reason this has less of a footprint is due to the trick
that an "empty" hash in the filter_hash means "all functions" and
an empty hash in the notrace hash means "no functions" in the hash.
This is much more efficienct, doesn't have the delay, and takes up
much less memory, as we do not need to map all the functions but
just figure out which functions are mapped at the time it is
enabled or disabled.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add three new flags for ftrace_ops:
FTRACE_OPS_FL_ADDING
FTRACE_OPS_FL_REMOVING
FTRACE_OPS_FL_MODIFYING
These will be set for the ftrace_ops when they are first added
to the function tracing, being removed from function tracing
or just having their functions changed from function tracing,
respectively.
This will be needed to remove the tramp_hash, which can grow quite
big. The tramp_hash is used to note what functions a ftrace_ops
is using a trampoline for. Denoting which ftrace_ops is being
modified, will allow us to use the ftrace_ops hashes themselves,
which are much smaller as they have a global flag to denote if
a ftrace_ops is tracing all functions, as well as a notrace hash
if the ftrace_ops is tracing all but a few. The tramp_hash just
creates a hash item for every function, which can go into the 10s
of thousands if all functions are using the ftrace_ops trampoline.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When dumping the enabled_functions, use the first op that is
found with a trampoline to the record, as there should only be
one, as only one ops can be registered to a function that has
a trampoline.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_hash_move() currently frees the old hash that is passed to it
after replacing the pointer with the new hash. Instead of having the
function do that chore, have the caller perform the free.
This lets the ftrace_hash_move() be used a bit more freely, which
is needed for changing the way the trampoline logic is done.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The clean up that adds the helper function ftrace_ops_get_func()
caused the default function to not change when DYNAMIC_FTRACE was not
set and no ftrace_ops were registered. Although static tracing is
not very useful (not having DYNAMIC_FTRACE set), it is still supported
and we don't want to break it.
Clean up the if statement even more to specifically have the default
function call ftrace_stub when no ftrace_ops are registered. This
fixes the small bug for static tracing as well as makes the code a
bit more understandable.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the helper function to what the mcount trampoline is to call
for a ftrace_ops function. This helper will be used by arch code
in the future to set up dynamic trampolines. But as this does the
same tests that are performed in choosing what function to call for
the default mcount trampoline, might as well use it to clean up
the existing code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Instead of using the generic list function for callbacks that
are not recursive, call a new helper function from the mcount
trampoline called ftrace_ops_recur_func() that will do the recursion
checking for the callback.
This eliminates an indirection as well as will help in future code
that will use dynamically allocated trampolines.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Epoll on trace_pipe can sometimes hang in a weird case. If the ring buffer is
empty when we set waiters_pending but an event shows up exactly at that moment
we can miss being woken up by the ring buffers irq work. Since
ring_buffer_empty() is inherently racey we will sometimes think that the buffer
is not empty. So we don't get woken up and we don't think there are any events
even though there were some ready when we added the watch, which makes us hang.
This patch fixes this by making sure that we are actually on the wait list
before we set waiters_pending, and add a memory barrier to make sure
ring_buffer_empty() is going to be correct.
Link: http://lkml.kernel.org/p/1408989581-23727-1-git-send-email-jbacik@fb.com
Cc: stable@vger.kernel.org # 3.10+
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In __ftrace_replace_code(), when converting the call to a nop in a function
it needs to compare against the "curr" (current) value of the ftrace ops, and
not the "new" one. It currently does not affect x86 which is the only arch
to do the trampolines with function graph tracer, but when other archs that do
depend on this code implement the function graph trampoline, it can crash.
Here's an example when ARM uses the trampolines (in the future):
------------[ cut here ]------------
WARNING: CPU: 0 PID: 9 at kernel/trace/ftrace.c:1716 ftrace_bug+0x17c/0x1f4()
Modules linked in: omap_rng rng_core ipv6
CPU: 0 PID: 9 Comm: migration/0 Not tainted 3.16.0-test-10959-gf0094b28f303-dirty #52
[<c02188f4>] (unwind_backtrace) from [<c021343c>] (show_stack+0x20/0x24)
[<c021343c>] (show_stack) from [<c095a674>] (dump_stack+0x78/0x94)
[<c095a674>] (dump_stack) from [<c02532a0>] (warn_slowpath_common+0x7c/0x9c)
[<c02532a0>] (warn_slowpath_common) from [<c02532ec>] (warn_slowpath_null+0x2c/0x34)
[<c02532ec>] (warn_slowpath_null) from [<c02cbac4>] (ftrace_bug+0x17c/0x1f4)
[<c02cbac4>] (ftrace_bug) from [<c02cc44c>] (ftrace_replace_code+0x80/0x9c)
[<c02cc44c>] (ftrace_replace_code) from [<c02cc658>] (ftrace_modify_all_code+0xb8/0x164)
[<c02cc658>] (ftrace_modify_all_code) from [<c02cc718>] (__ftrace_modify_code+0x14/0x1c)
[<c02cc718>] (__ftrace_modify_code) from [<c02c7244>] (multi_cpu_stop+0xf4/0x134)
[<c02c7244>] (multi_cpu_stop) from [<c02c6e90>] (cpu_stopper_thread+0x54/0x130)
[<c02c6e90>] (cpu_stopper_thread) from [<c0271cd4>] (smpboot_thread_fn+0x1ac/0x1bc)
[<c0271cd4>] (smpboot_thread_fn) from [<c026ddf0>] (kthread+0xe0/0xfc)
[<c026ddf0>] (kthread) from [<c020f318>] (ret_from_fork+0x14/0x20)
---[ end trace dc9ce72c5b617d8f ]---
[ 65.047264] ftrace failed to modify [<c0208580>] asm_do_IRQ+0x10/0x1c
[ 65.054070] actual: 85:1b:00:eb
Fixes: 7413af1fb7 "ftrace: Make get_ftrace_addr() and get_ftrace_addr_old() global"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latest rewrite of ftrace removed the separate ftrace_ops of
the function tracer and the function graph tracer and had them
share the same ftrace_ops. This simplified the accounting by removing
the multiple layers of functions called, where the global_ops func
would call a special list that would iterate over the other ops that
were registered within it (like function and function graph), which
itself was registered to the ftrace ops list of all functions
currently active. If that sounds confusing, the code that implemented
it was also confusing and its removal is a good thing.
The problem with this change was that it assumed that the function
and function graph tracer can never be used at the same time.
This is mostly true, but there is an exception. That is when the
function profiler uses the function graph tracer to profile.
The function profiler can be activated the same time as the function
tracer, and this breaks the assumption and the result is that ftrace
will crash (it detects the error and shuts itself down, it does not
cause a kernel oops).
To solve this issue, a previous change allowed the hash tables
for the functions traced by a ftrace_ops to be a pointer and let
multiple ftrace_ops share the same hash. This allows the function
and function_graph tracer to have separate ftrace_ops, but still
share the hash, which is what is done.
Now the function and function graph tracers have separate ftrace_ops
again, and the function tracer can be run while the function_profile
is active.
Cc: stable@vger.kernel.org # 3.16 (apply after 3.17-rc4 is out)
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that a ftrace_hash can be shared by multiple ftrace_ops, they can dec
the rec->flags by more than once (one per those that share the ftrace_hash).
This means that the tramp_hash may not have a hash item when it was added.
For example, if two ftrace_ops share a hash for a ftrace record, and the
first ops has a trampoline, when it adds itself it will set the rec->flags
TRAMP flag and increments its nr_trampolines counter. When the second ops
is added, it must clear that tramp flag but also decrement the other ops
that shares its hash. As the update to the function callbacks has not yet
been performed, the other ops will not have the tramp hash set yet and it
can not be used to know to decrement its nr_trampolines.
Luckily, the tramp_hash does not need to be used. As the ftrace_mutex is
held, a ops with a trampoline to a record during an update of another ops
that shares the record will have its func_hash pointing to it. Since a
trampoline can only be set for a record if only one ops is attached to it,
we can just check if the record has a trampoline (the FTRACE_FL_TRAMP flag
is set) and then find the ops that has this record in its hashes.
Also added some output to help debug when things go wrong.
Cc: stable@vger.kernel.org # 3.16+ (apply after 3.17-rc4 is out)
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When updating what an ftrace_ops traces, if it is registered (that is,
actively tracing), and that ftrace_ops uses the shared global_ops
local_hash, then we need to update all tracers that are active and
also share the global_ops' ftrace_hash_ops.
Cc: stable@vger.kernel.org # 3.16 (apply after 3.17-rc4 is out)
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the top level debug file system function tracer shares its
ftrace_ops with the function graph tracer. This was thought to be fine
because the tracers are not used together, as one can only enable
function or function_graph tracer in the current_tracer file.
But that assumption proved to be incorrect. The function profiler
can use the function graph tracer when function tracing is enabled.
Since all function graph users uses the function tracing ftrace_ops
this causes a conflict and when a user enables both function profiling
as well as the function tracer it will crash ftrace and disable it.
The quick solution so far is to move them as separate ftrace_ops like
it was earlier. The problem though is to synchronize the functions that
are traced because both function and function_graph tracer are limited
by the selections made in the set_ftrace_filter and set_ftrace_notrace
files.
To handle this, a new structure is made called ftrace_ops_hash. This
structure will now hold the filter_hash and notrace_hash, and the
ftrace_ops will point to this structure. That will allow two ftrace_ops
to share the same hashes.
Since most ftrace_ops do not share the hashes, and to keep allocation
simple, the ftrace_ops structure will include both a pointer to the
ftrace_ops_hash called func_hash, as well as the structure itself,
called local_hash. When the ops are registered, the func_hash pointer
will be initialized to point to the local_hash within the ftrace_ops
structure. Some of the ftrace internal ftrace_ops will be initialized
statically. This will allow for the function and function_graph tracer
to have separate ops but still share the same hash tables that determine
what functions they trace.
Cc: stable@vger.kernel.org # 3.16 (apply after 3.17-rc4 is out)
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
rarely ever hit, and requires the user to do something that users rarely
do. It took a few special test cases to even trigger this bug,
and one of them was just one test in the process of finishing up as another
one started.
Both bugs have to do with the ring buffer iterator rb_iter_peek(), but one
is more indirect than the other.
The fist bug fix is simply an increase in the safety net loop counter.
The counter makes sure that the rb_iter_peek() only iterates the number
of times we expect it can, and no more. Well, there was one way it could
iterate one more than we expected, and that caused the ring buffer
to shutdown with a nasty warning. The fix was simply to up that counter by
one.
The other bug has to be with rb_iter_reset() (called by rb_iter_peek()).
This happens when a user reads both the trace_pipe and trace files.
The trace_pipe is a consuming read and does not use the ring buffer
iterator, but the trace file is not a consuming read and does use the
ring buffer iterator. When the trace file is being read, if it detects
that a consuming read occurred, it resets the iterator and starts over.
But the reset code that does this (rb_iter_reset()), checks if the
reader_page is linked to the ring buffer or not, and will look into
the ring buffer itself if it is not. This is wrong, as it should always
try to read the reader page first. Not to mention, the code that looked
into the ring buffer did it wrong, and used the header_page "read" offset
to start reading on that page. That offset is bogus for pages in the
writable ring buffer, and was corrupting the iterator, and it would start
returning bogus events.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT44tRAAoJEKQekfcNnQGuMVIH/3evbjKT+w6Kon4S0LfLSejl
YDsXYkeO/lGiO3MnUveqq1jfw2+yHtyBVUipvfG0A61urMUhyUvjveph8Ec2cQ4Q
qHl0J28vDfF5tpKiYzygRN01wHD6GXYh+XZSChkA4ItzzD8K51lsZT1Yd+I2pTy2
DgH01EEEYiwYJcih+T4vlbKqYju6pwgxqKNCTv0RdVXUPya/tG9X2Nf8VGQTbmKS
FIO73qObYR+P9iXGIuPfyOxk2EvBiWS15WownZmfhZZxOIKx9IrDYwTsiV1+AJw+
sJFER1ulobYGDtGDa9yyrNJQr6wgbrfCDELnNKmdLUTlSwgZjLXpE2HEmlelY/s=
=5mQl
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull trace file read iterator fixes from Steven Rostedt:
"This contains a fix for two long standing bugs. Both of which are
rarely ever hit, and requires the user to do something that users
rarely do. It took a few special test cases to even trigger this bug,
and one of them was just one test in the process of finishing up as
another one started.
Both bugs have to do with the ring buffer iterator rb_iter_peek(), but
one is more indirect than the other.
The fist bug fix is simply an increase in the safety net loop counter.
The counter makes sure that the rb_iter_peek() only iterates the
number of times we expect it can, and no more. Well, there was one
way it could iterate one more than we expected, and that caused the
ring buffer to shutdown with a nasty warning. The fix was simply to
up that counter by one.
The other bug has to be with rb_iter_reset() (called by
rb_iter_peek()). This happens when a user reads both the trace_pipe
and trace files. The trace_pipe is a consuming read and does not use
the ring buffer iterator, but the trace file is not a consuming read
and does use the ring buffer iterator. When the trace file is being
read, if it detects that a consuming read occurred, it resets the
iterator and starts over. But the reset code that does this
(rb_iter_reset()), checks if the reader_page is linked to the ring
buffer or not, and will look into the ring buffer itself if it is not.
This is wrong, as it should always try to read the reader page first.
Not to mention, the code that looked into the ring buffer did it
wrong, and used the header_page "read" offset to start reading on that
page. That offset is bogus for pages in the writable ring buffer, and
was corrupting the iterator, and it would start returning bogus
events"
* tag 'trace-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Always reset iterator to reader page
ring-buffer: Up rb_iter_peek() loop count to 3
When performing a consuming read, the ring buffer swaps out a
page from the ring buffer with a empty page and this page that
was swapped out becomes the new reader page. The reader page
is owned by the reader and since it was swapped out of the ring
buffer, writers do not have access to it (there's an exception
to that rule, but it's out of scope for this commit).
When reading the "trace" file, it is a non consuming read, which
means that the data in the ring buffer will not be modified.
When the trace file is opened, a ring buffer iterator is allocated
and writes to the ring buffer are disabled, such that the iterator
will not have issues iterating over the data.
Although the ring buffer disabled writes, it does not disable other
reads, or even consuming reads. If a consuming read happens, then
the iterator is reset and starts reading from the beginning again.
My tests would sometimes trigger this bug on my i386 box:
WARNING: CPU: 0 PID: 5175 at kernel/trace/trace.c:1527 __trace_find_cmdline+0x66/0xaa()
Modules linked in:
CPU: 0 PID: 5175 Comm: grep Not tainted 3.16.0-rc3-test+ #8
Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006
00000000 00000000 f09c9e1c c18796b3 c1b5d74c f09c9e4c c103a0e3 c1b5154b
f09c9e78 00001437 c1b5d74c 000005f7 c10bd85a c10bd85a c1cac57c f09c9eb0
ed0e0000 f09c9e64 c103a185 00000009 f09c9e5c c1b5154b f09c9e78 f09c9e80^M
Call Trace:
[<c18796b3>] dump_stack+0x4b/0x75
[<c103a0e3>] warn_slowpath_common+0x7e/0x95
[<c10bd85a>] ? __trace_find_cmdline+0x66/0xaa
[<c10bd85a>] ? __trace_find_cmdline+0x66/0xaa
[<c103a185>] warn_slowpath_fmt+0x33/0x35
[<c10bd85a>] __trace_find_cmdline+0x66/0xaa^M
[<c10bed04>] trace_find_cmdline+0x40/0x64
[<c10c3c16>] trace_print_context+0x27/0xec
[<c10c4360>] ? trace_seq_printf+0x37/0x5b
[<c10c0b15>] print_trace_line+0x319/0x39b
[<c10ba3fb>] ? ring_buffer_read+0x47/0x50
[<c10c13b1>] s_show+0x192/0x1ab
[<c10bfd9a>] ? s_next+0x5a/0x7c
[<c112e76e>] seq_read+0x267/0x34c
[<c1115a25>] vfs_read+0x8c/0xef
[<c112e507>] ? seq_lseek+0x154/0x154
[<c1115ba2>] SyS_read+0x54/0x7f
[<c188488e>] syscall_call+0x7/0xb
---[ end trace 3f507febd6b4cc83 ]---
>>>> ##### CPU 1 buffer started ####
Which was the __trace_find_cmdline() function complaining about the pid
in the event record being negative.
After adding more test cases, this would trigger more often. Strangely
enough, it would never trigger on a single test, but instead would trigger
only when running all the tests. I believe that was the case because it
required one of the tests to be shutting down via delayed instances while
a new test started up.
After spending several days debugging this, I found that it was caused by
the iterator becoming corrupted. Debugging further, I found out why
the iterator became corrupted. It happened with the rb_iter_reset().
As consuming reads may not read the full reader page, and only part
of it, there's a "read" field to know where the last read took place.
The iterator, must also start at the read position. In the rb_iter_reset()
code, if the reader page was disconnected from the ring buffer, the iterator
would start at the head page within the ring buffer (where writes still
happen). But the mistake there was that it still used the "read" field
to start the iterator on the head page, where it should always start
at zero because readers never read from within the ring buffer where
writes occur.
I originally wrote a patch to have it set the iter->head to 0 instead
of iter->head_page->read, but then I questioned why it wasn't always
setting the iter to point to the reader page, as the reader page is
still valid. The list_empty(reader_page->list) just means that it was
successful in swapping out. But the reader_page may still have data.
There was a bug report a long time ago that was not reproducible that
had something about trace_pipe (consuming read) not matching trace
(iterator read). This may explain why that happened.
Anyway, the correct answer to this bug is to always use the reader page
an not reset the iterator to inside the writable ring buffer.
Cc: stable@vger.kernel.org # 2.6.28+
Fixes: d769041f86 "ring_buffer: implement new locking"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
After writting a test to try to trigger the bug that caused the
ring buffer iterator to become corrupted, I hit another bug:
WARNING: CPU: 1 PID: 5281 at kernel/trace/ring_buffer.c:3766 rb_iter_peek+0x113/0x238()
Modules linked in: ipt_MASQUERADE sunrpc [...]
CPU: 1 PID: 5281 Comm: grep Tainted: G W 3.16.0-rc3-test+ #143
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
0000000000000000 ffffffff81809a80 ffffffff81503fb0 0000000000000000
ffffffff81040ca1 ffff8800796d6010 ffffffff810c138d ffff8800796d6010
ffff880077438c80 ffff8800796d6010 ffff88007abbe600 0000000000000003
Call Trace:
[<ffffffff81503fb0>] ? dump_stack+0x4a/0x75
[<ffffffff81040ca1>] ? warn_slowpath_common+0x7e/0x97
[<ffffffff810c138d>] ? rb_iter_peek+0x113/0x238
[<ffffffff810c138d>] ? rb_iter_peek+0x113/0x238
[<ffffffff810c14df>] ? ring_buffer_iter_peek+0x2d/0x5c
[<ffffffff810c6f73>] ? tracing_iter_reset+0x6e/0x96
[<ffffffff810c74a3>] ? s_start+0xd7/0x17b
[<ffffffff8112b13e>] ? kmem_cache_alloc_trace+0xda/0xea
[<ffffffff8114cf94>] ? seq_read+0x148/0x361
[<ffffffff81132d98>] ? vfs_read+0x93/0xf1
[<ffffffff81132f1b>] ? SyS_read+0x60/0x8e
[<ffffffff8150bf9f>] ? tracesys+0xdd/0xe2
Debugging this bug, which triggers when the rb_iter_peek() loops too
many times (more than 2 times), I discovered there's a case that can
cause that function to legitimately loop 3 times!
rb_iter_peek() is different than rb_buffer_peek() as the rb_buffer_peek()
only deals with the reader page (it's for consuming reads). The
rb_iter_peek() is for traversing the buffer without consuming it, and as
such, it can loop for one more reason. That is, if we hit the end of
the reader page or any page, it will go to the next page and try again.
That is, we have this:
1. iter->head > iter->head_page->page->commit
(rb_inc_iter() which moves the iter to the next page)
try again
2. event = rb_iter_head_event()
event->type_len == RINGBUF_TYPE_TIME_EXTEND
rb_advance_iter()
try again
3. read the event.
But we never get to 3, because the count is greater than 2 and we
cause the WARNING and return NULL.
Up the counter to 3.
Cc: stable@vger.kernel.org # 2.6.37+
Fixes: 69d1b839f7 "ring-buffer: Bind time extend and data events together"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull timer and time updates from Thomas Gleixner:
"A rather large update of timers, timekeeping & co
- Core timekeeping code is year-2038 safe now for 32bit machines.
Now we just need to fix all in kernel users and the gazillion of
user space interfaces which rely on timespec/timeval :)
- Better cache layout for the timekeeping internal data structures.
- Proper nanosecond based interfaces for in kernel users.
- Tree wide cleanup of code which wants nanoseconds but does hoops
and loops to convert back and forth from timespecs. Some of it
definitely belongs into the ugly code museum.
- Consolidation of the timekeeping interface zoo.
- A fast NMI safe accessor to clock monotonic for tracing. This is a
long standing request to support correlated user/kernel space
traces. With proper NTP frequency correction it's also suitable
for correlation of traces accross separate machines.
- Checkpoint/restart support for timerfd.
- A few NOHZ[_FULL] improvements in the [hr]timer code.
- Code move from kernel to kernel/time of all time* related code.
- New clocksource/event drivers from the ARM universe. I'm really
impressed that despite an architected timer in the newer chips SoC
manufacturers insist on inventing new and differently broken SoC
specific timers.
[ Ed. "Impressed"? I don't think that word means what you think it means ]
- Another round of code move from arch to drivers. Looks like most
of the legacy mess in ARM regarding timers is sorted out except for
a few obnoxious strongholds.
- The usual updates and fixlets all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
timekeeping: Fixup typo in update_vsyscall_old definition
clocksource: document some basic timekeeping concepts
timekeeping: Use cached ntp_tick_length when accumulating error
timekeeping: Rework frequency adjustments to work better w/ nohz
timekeeping: Minor fixup for timespec64->timespec assignment
ftrace: Provide trace clocks monotonic
timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC
seqcount: Add raw_write_seqcount_latch()
seqcount: Provide raw_read_seqcount()
timekeeping: Use tk_read_base as argument for timekeeping_get_ns()
timekeeping: Create struct tk_read_base and use it in struct timekeeper
timekeeping: Restructure the timekeeper some more
clocksource: Get rid of cycle_last
clocksource: Move cycle_last validation to core code
clocksource: Make delta calculation a function
wireless: ath9k: Get rid of timespec conversions
drm: vmwgfx: Use nsec based interfaces
drm: i915: Use nsec based interfaces
timekeeping: Provide ktime_get_raw()
hangcheck-timer: Use ktime_get_ns()
...
Pull perf changes from Ingo Molnar:
"Kernel side changes:
- Consolidate the PMU interrupt-disabled code amongst architectures
(Vince Weaver)
- misc fixes
Tooling changes (new features, user visible changes):
- Add support for pagefault tracing in 'trace', please see multiple
examples in the changeset messages (Stanislav Fomichev).
- Add pagefault statistics in 'trace' (Stanislav Fomichev)
- Add header for columns in 'top' and 'report' TUI browsers (Jiri
Olsa)
- Add pagefault statistics in 'trace' (Stanislav Fomichev)
- Add IO mode into timechart command (Stanislav Fomichev)
- Fallback to syscalls:* when raw_syscalls:* is not available in the
perl and python perf scripts. (Daniel Bristot de Oliveira)
- Add --repeat global option to 'perf bench' to be used in benchmarks
such as the existing 'futex' one, that was modified to use it
instead of a local option. (Davidlohr Bueso)
- Fix fd -> pathname resolution in 'trace', be it using /proc or a
vfs_getname probe point. (Arnaldo Carvalho de Melo)
- Add suggestion of how to set perf_event_paranoid sysctl, to help
non-root users trying tools like 'trace' to get a working
environment. (Arnaldo Carvalho de Melo)
- Updates from trace-cmd for traceevent plugin_kvm plus args cleanup
(Steven Rostedt, Jan Kiszka)
- Support S/390 in 'perf kvm stat' (Alexander Yarygin)
Tooling infrastructure changes:
- Allow reserving a row for header purposes in the hists browser
(Arnaldo Carvalho de Melo)
- Various fixes and prep work related to supporting Intel PT (Adrian
Hunter)
- Introduce multiple debug variables control (Jiri Olsa)
- Add callchain and additional sample information for python scripts
(Joseph Schuchart)
- More prep work to support Intel PT: (Adrian Hunter)
- Polishing 'script' BTS output
- 'inject' can specify --kallsym
- VDSO is per machine, not a global var
- Expose data addr lookup functions previously private to 'script'
- Large mmap fixes in events processing
- Include standard stringify macros in power pc code (Sukadev
Bhattiprolu)
Tooling cleanups:
- Convert open coded equivalents to asprintf() (Andy Shevchenko)
- Remove needless reassignments in 'trace' (Arnaldo Carvalho de Melo)
- Cache the is_exit syscall test in 'trace) (Arnaldo Carvalho de
Melo)
- No need to reimplement err() in 'perf bench sched-messaging', drop
barf(). (Davidlohr Bueso).
- Remove ev_name argument from perf_evsel__hists_browse, can be
obtained from the other parameters. (Jiri Olsa)
Tooling fixes:
- Fix memory leak in the 'sched-messaging' perf bench test.
(Davidlohr Bueso)
- The -o and -n 'perf bench mem' options are mutually exclusive, emit
error when both are specified. (Davidlohr Bueso)
- Fix scrollbar refresh row index in the ui browser, problem exposed
now that headers will be added and will be allowed to be switched
on/off. (Jiri Olsa)
- Handle the num array type in python properly (Sebastian Andrzej
Siewior)
- Fix wrong condition for allocation failure (Jiri Olsa)
- Adjust callchain based on DWARF debug info on powerpc (Sukadev
Bhattiprolu)
- Fix a risk for doing free on uninitialized pointer in traceevent
lib (Rickard Strandqvist)
- Update attr test with PERF_FLAG_FD_CLOEXEC flag (Jiri Olsa)
- Enable close-on-exec flag on perf file descriptor (Yann Droneaud)
- Fix build on gcc 4.4.7 (Arnaldo Carvalho de Melo)
- Event ordering fixes (Jiri Olsa)"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (123 commits)
Revert "perf tools: Fix jump label always changing during tracing"
perf tools: Fix perf usage string leftover
perf: Check permission only for parent tracepoint event
perf record: Store PERF_RECORD_FINISHED_ROUND only for nonempty rounds
perf record: Always force PERF_RECORD_FINISHED_ROUND event
perf inject: Add --kallsyms parameter
perf tools: Expose 'addr' functions so they can be reused
perf session: Fix accounting of ordered samples queue
perf powerpc: Include util/util.h and remove stringify macros
perf tools: Fix build on gcc 4.4.7
perf tools: Add thread parameter to vdso__dso_findnew()
perf tools: Add dso__type()
perf tools: Separate the VDSO map name from the VDSO dso name
perf tools: Add vdso__new()
perf machine: Fix the lifetime of the VDSO temporary file
perf tools: Group VDSO global variables into a structure
perf session: Add ability to skip 4GiB or more
perf session: Add ability to 'skip' a non-piped event stream
perf tools: Pass machine to vdso__dso_findnew()
perf tools: Add dso__data_size()
...
As he found some small bugs that went into 3.16, and these changes were
based on that, I had to apply his changes to a separate branch than
my main development branch.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT3533AAoJEKQekfcNnQGuaNkIALM9uf6gvIXgvyAlhK1qfjJL
0pxAlgppukA7hZT9gcubGuStPxKnwtVSvd/GwGI/mc7Ls57vOvdA61TEHN48l2MW
SUev1Jeu1Nx3Wh4B2ivRq+dJadrwU9NwG507yvuXn2L8Gqzwal133dg3AHnsTYgz
yu7oe8baxMniFFYlAmSELFp2cA3kli/WrRuQB7weudbT12jZlpOMqz7OUN9o7dfo
E4XfwkkDUuo9EiKD1QwVMk2cIkCaHFI8lJDYJbrM3L5XJKfnKzZNRMWfwDG2L7hS
DGjMl6T0SjU+ZIoTidHdbyF/Q+I0o9kKTnUrErGu88+2Z1gfEKN5O8zovNMbPUM=
=dT/x
-----END PGP SIGNATURE-----
Merge tag 'trace-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing filter cleanups from Steven Rostedt:
"Oleg Nesterov did several clean ups with the tracing filter code. As
he found some small bugs that went into 3.16, and these changes were
based on that, I had to apply his changes to a separate branch than my
main development branch.
This was based on work that was already pulled into 3.16, and is a
separate pull request to keep from having local merges in my pull
request"
* tag 'trace-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Kill "filter_string" arg of replace_preds()
tracing: Change apply_subsystem_event_filter() paths to check file->system == dir
tracing: Kill ftrace_event_call->files
tracing/uprobes: Kill the dead TRACE_EVENT_FL_USE_CALL_FILTER logic
tracing: Kill call_filter_disable()
tracing: Kill destroy_call_preds()
tracing: Kill destroy_preds() and destroy_file_preds()
to the ftrace function callback infrastructure. It's introducing a
way to allow different functions to call directly different trampolines
instead of all calling the same "mcount" one.
The only user of this for now is the function graph tracer, which always
had a different trampoline, but the function tracer trampoline was called
and did basically nothing, and then the function graph tracer trampoline
was called. The difference now, is that the function graph tracer
trampoline can be called directly if a function is only being traced by
the function graph trampoline. If function tracing is also happening on
the same function, the old way is still done.
The accounting for this takes up more memory when function graph tracing
is activated, as it needs to keep track of which functions it uses.
I have a new way that wont take as much memory, but it's not ready yet
for this merge window, and will have to wait for the next one.
Another big change was the removal of the ftrace_start/stop() calls that
were used by the suspend/resume code that stopped function tracing when
entering into suspend and resume paths. The stop of ftrace was done
because there was some function that would crash the system if one called
smp_processor_id()! The stop/start was a big hammer to solve the issue
at the time, which was when ftrace was first introduced into Linux.
Now ftrace has better infrastructure to debug such issues, and I found
the problem function and labeled it with "notrace" and function tracing
can now safely be activated all the way down into the guts of suspend
and resume.
Other changes include clean ups of uprobe code.
Clean up of the trace_seq() code.
And other various small fixes and clean ups to ftrace and tracing.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT35zXAAoJEKQekfcNnQGuOz0H/38zqM0nLFhrgvz3EPk2UOjn
xqpX8qyb2V7TJZL+IqeXU2a5cQZl5ba0D4WtBGpxbTae3CJYiuQ87iKUNFoH0om5
FDpn80igb368k8V3qRdRsziKVCCf0XBd/NkHJXc0ZkfXGyzB2Ga4bBxALxp2gj9y
bnO+vKo6+tWYKG4hyQb4P3LRXUrK8/LWEsPr39cH2QH1Rdj69Lx9CgrCdUVJmwcb
Bj8hEiLXL/RYCFNn79A3wNTUvW0rG/AOIf4SLqXtasSRZ0ToaU0ZyDnrNv+0Ol47
rX8tSk+LfXchL9hpIvjCf1vlAYq3pO02favteR/jip3lx/dTjEDE4RJ9qtJzZ4Q=
=fwQY
-----END PGP SIGNATURE-----
Merge tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This pull request has a lot of work done. The main thing is the
changes to the ftrace function callback infrastructure. It's
introducing a way to allow different functions to call directly
different trampolines instead of all calling the same "mcount" one.
The only user of this for now is the function graph tracer, which
always had a different trampoline, but the function tracer trampoline
was called and did basically nothing, and then the function graph
tracer trampoline was called. The difference now, is that the
function graph tracer trampoline can be called directly if a function
is only being traced by the function graph trampoline. If function
tracing is also happening on the same function, the old way is still
done.
The accounting for this takes up more memory when function graph
tracing is activated, as it needs to keep track of which functions it
uses. I have a new way that wont take as much memory, but it's not
ready yet for this merge window, and will have to wait for the next
one.
Another big change was the removal of the ftrace_start/stop() calls
that were used by the suspend/resume code that stopped function
tracing when entering into suspend and resume paths. The stop of
ftrace was done because there was some function that would crash the
system if one called smp_processor_id()! The stop/start was a big
hammer to solve the issue at the time, which was when ftrace was first
introduced into Linux. Now ftrace has better infrastructure to debug
such issues, and I found the problem function and labeled it with
"notrace" and function tracing can now safely be activated all the way
down into the guts of suspend and resume
Other changes include clean ups of uprobe code, clean up of the
trace_seq() code, and other various small fixes and clean ups to
ftrace and tracing"
* tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits)
ftrace: Add warning if tramp hash does not match nr_trampolines
ftrace: Fix trampoline hash update check on rec->flags
ring-buffer: Use rb_page_size() instead of open coded head_page size
ftrace: Rename ftrace_ops field from trampolines to nr_trampolines
tracing: Convert local function_graph functions to static
ftrace: Do not copy old hash when resetting
tracing: let user specify tracing_thresh after selecting function_graph
ring-buffer: Always run per-cpu ring buffer resize with schedule_work_on()
tracing: Remove function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST
s390/ftrace: remove check of obsolete variable function_trace_stop
arm64, ftrace: Remove check of obsolete variable function_trace_stop
Blackfin: ftrace: Remove check of obsolete variable function_trace_stop
metag: ftrace: Remove check of obsolete variable function_trace_stop
microblaze: ftrace: Remove check of obsolete variable function_trace_stop
MIPS: ftrace: Remove check of obsolete variable function_trace_stop
parisc: ftrace: Remove check of obsolete variable function_trace_stop
sh: ftrace: Remove check of obsolete variable function_trace_stop
sparc64,ftrace: Remove check of obsolete variable function_trace_stop
tile: ftrace: Remove check of obsolete variable function_trace_stop
ftrace: x86: Remove check of obsolete variable function_trace_stop
...
There's no need to check cloned event's permission once the
parent was already checked.
Also the code is checking 'current' process permissions, which
is not owner process for cloned events, thus could end up with
wrong permission check result.
Reported-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Tested-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1405079782-8139-1-git-send-email-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After adding all the records to the tramp_hash, add a check that makes
sure that the number of records added matches the number of records
expected to match and do a WARN_ON and disable ftrace if they do
not match.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In the loop of ftrace_save_ops_tramp_hash(), it adds all the recs
to the ops hash if the rec has only one callback attached and the
ops is connected to the rec. It gives a nasty warning and shuts down
ftrace if the rec doesn't have a trampoline set for it. But this
can happen with the following scenario:
# cd /sys/kernel/debug/tracing
# echo schedule do_IRQ > set_ftrace_filter
# mkdir instances/foo
# echo schedule > instances/foo/set_ftrace_filter
# echo function_graph > current_function
# echo function > instances/foo/current_function
# echo nop > instances/foo/current_function
The above would then trigger the following warning and disable
ftrace:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 3145 at kernel/trace/ftrace.c:2212 ftrace_run_update_code+0xe4/0x15b()
Modules linked in: ipt_MASQUERADE sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ip [...]
CPU: 1 PID: 3145 Comm: bash Not tainted 3.16.0-rc3-test+ #136
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
0000000000000000 ffffffff81808a88 ffffffff81502130 0000000000000000
ffffffff81040ca1 ffff880077c08000 ffffffff810bd286 0000000000000001
ffffffff81a56830 ffff88007a041be0 ffff88007a872d60 00000000000001be
Call Trace:
[<ffffffff81502130>] ? dump_stack+0x4a/0x75
[<ffffffff81040ca1>] ? warn_slowpath_common+0x7e/0x97
[<ffffffff810bd286>] ? ftrace_run_update_code+0xe4/0x15b
[<ffffffff810bd286>] ? ftrace_run_update_code+0xe4/0x15b
[<ffffffff810bda1a>] ? ftrace_shutdown+0x11c/0x16b
[<ffffffff810bda87>] ? unregister_ftrace_function+0x1e/0x38
[<ffffffff810cc7e1>] ? function_trace_reset+0x1a/0x28
[<ffffffff810c924f>] ? tracing_set_tracer+0xc1/0x276
[<ffffffff810c9477>] ? tracing_set_trace_write+0x73/0x91
[<ffffffff81132383>] ? __sb_start_write+0x9a/0xcc
[<ffffffff8120478f>] ? security_file_permission+0x1b/0x31
[<ffffffff81130e49>] ? vfs_write+0xac/0x11c
[<ffffffff8113115d>] ? SyS_write+0x60/0x8e
[<ffffffff81508112>] ? system_call_fastpath+0x16/0x1b
---[ end trace 938c4415cbc7dc96 ]---
------------[ cut here ]------------
Link: http://lkml.kernel.org/r/20140723120805.GB21376@redhat.com
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a helper function to get a ring buffer page size (the number
of bytes of data recorded on the page), called rb_page_size().
Use that instead of open coding it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Expose the new NMI safe accessor to clock monotonic to the tracer.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Having two fields within the same struct that is off by one character
can be confusing and error prone. Rename the counter "trampolines"
to "nr_trampolines" to explicitly show it is a counter and not to
be confused by the "trampoline" field.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The "uptime" trace clock added in:
commit 8aacf017b0
tracing: Add "uptime" trace clock that uses jiffies
has wraparound problems when the system has been up more
than 1 hour 11 minutes and 34 seconds. It converts jiffies
to nanoseconds using:
(u64)jiffies_to_usecs(jiffy) * 1000ULL
but since jiffies_to_usecs() only returns a 32-bit value, it
truncates at 2^32 microseconds. An additional problem on 32-bit
systems is that the argument is "unsigned long", so fixing the
return value only helps until 2^32 jiffies (49.7 days on a HZ=1000
system).
Avoid these problems by using jiffies_64 as our basis, and
not converting to nanoseconds (we do convert to clock_t because
user facing API must not be dependent on internal kernel
HZ values).
Link: http://lkml.kernel.org/p/99d63c5bfe9b320a3b428d773825a37095bf6a51.1405708254.git.tony.luck@intel.com
Cc: stable@vger.kernel.org # 3.10+
Fixes: 8aacf017b0 "tracing: Add "uptime" trace clock that uses jiffies"
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Do not waste time copying the old hash if the hash is going to be
reset. Just allocate a new hash and free the old one, as that is
the same result as copying te old one and then resetting it.
Link: http://lkml.kernel.org/p/1405384820-48837-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[ SDR: Removed unused ftrace_filter_reset() function ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, tracing_thresh works only if we specify it before selecting
function_graph tracer. If we do the opposite, tracing_thresh will change
it's value, but it will not be applied.
To fix it, we add update_thresh callback which is called whenever
tracing_thresh is updated and for function_graph tracer we register
handler which reinitializes tracer depending on tracing_thresh.
Link: http://lkml.kernel.org/p/20140718111727.GA3206@stfomichev-desktop.yandex.net
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The code for resizing the trace ring buffers has to run the per-cpu
resize on the CPU itself. The code was using preempt_off() and
running the code for the current CPU directly, otherwise calling
schedule_work_on().
At least on RT this could result in the following:
|BUG: sleeping function called from invalid context at kernel/rtmutex.c:673
|in_atomic(): 1, irqs_disabled(): 0, pid: 607, name: bash
|3 locks held by bash/607:
|CPU: 0 PID: 607 Comm: bash Not tainted 3.12.15-rt25+ #124
|(rt_spin_lock+0x28/0x68)
|(free_hot_cold_page+0x84/0x3b8)
|(free_buffer_page+0x14/0x20)
|(rb_update_pages+0x280/0x338)
|(ring_buffer_resize+0x32c/0x3dc)
|(free_snapshot+0x18/0x38)
|(tracing_set_tracer+0x27c/0x2ac)
probably via
|cd /sys/kernel/debug/tracing/
|echo 1 > events/enable ; sleep 2
|echo 1024 > buffer_size_kb
If we just always use schedule_work_on(), there's no need for the
preempt_off(). So do that.
Link: http://lkml.kernel.org/p/1405537633-31518-1-git-send-email-cminyard@mvista.com
Reported-by: Stanislav Meduna <stano@meduna.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
All users of function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST have
been removed. We can safely remove them from the kernel.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
function_trace_stop is no longer used to stop function tracing.
Remove the check from __ftrace_ops_list_func().
Also, call FTRACE_WARN_ON() instead of setting function_trace_stop
if a ops has no func to call.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When function tracing is being updated function_trace_stop is set to
keep from tracing the updates. This was fine when function tracing
was done from stop machine. But it is no longer done that way and
this can cause real tracing to be missed.
Remove it.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
All archs now use ftrace_graph_is_dead() to stop function graph
tracing. Remove the usage of ftrace_stop() as that is no longer
needed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_stop() is going away as it disables parts of function tracing
that affects users that should not be affected. But ftrace_graph_stop()
is built on ftrace_stop(). Here's another example of killing all of
function tracing because something went wrong with function graph
tracing.
Instead of disabling all users of function tracing on function graph
error, disable only function graph tracing.
A new function is created called ftrace_graph_is_dead(). This is called
in strategic paths to prevent function graph from doing more harm and
allowing at least a warning to be printed before the system crashes.
NOTE: ftrace_stop() is still used until all the archs are converted over
to use ftrace_graph_is_dead(). After that, ftrace_stop() will be removed.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cosmetic, but replace_preds() doesn't need/use "char *filter_string".
Remove it to microsimplify the code.
Link: http://lkml.kernel.org/p/20140715184832.GA20519@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
filter_free_subsystem_preds(), filter_free_subsystem_filters() and
replace_system_preds() can simply check file->system->subsystem and
avoid strcmp(call->class->system).
Better yet, we can pass "struct ftrace_subsystem_dir *dir" instead of
event_subsystem and just check file->system == dir.
Thanks to Namhyung Kim who pointed out that replace_system_preds() can
be changed too.
Link: http://lkml.kernel.org/p/20140715184829.GA20516@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
alloc_trace_uprobe() sets TRACE_EVENT_FL_USE_CALL_FILTER for unknown
reason and this is simply wrong. Fortunately this has no effect because
register_uprobe_event() clears call->flags after that.
Kill both. This trace_uprobe was kzalloc'ed and we rely on this fact
anyway.
Link: http://lkml.kernel.org/p/20140715184824.GA20505@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It seems that the only purpose of call_filter_disable() is to
make filter_disable() less clear and symmetrical, remove it.
Link: http://lkml.kernel.org/p/20140715184821.GA20498@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove destroy_call_preds(). Its only caller, __trace_remove_event_call(),
can use free_event_filter() and nullify ->filter by hand.
Perhaps we could keep this trivial helper although imo it is pointless, but
then it should be static in trace_events.c.
Link: http://lkml.kernel.org/p/20140715184816.GA20495@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
destroy_preds() makes no sense.
The only caller, event_remove(), actually wants destroy_file_preds().
__trace_remove_event_call() does destroy_call_preds() which takes care
of call->filter.
And after the previous change we can simply remove destroy_preds() from
event_remove(), we are going to call remove_event_from_tracers() which
in turn calls remove_event_file_dir()->free_event_filter().
Link: http://lkml.kernel.org/p/20140715184813.GA20488@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently if an arch supports function graph tracing, the core code will
just assign the function graph trampoline to the function graph addr that
gets called.
But as the old method for function graph tracing always calls the function
trampoline first and that calls the function graph trampoline, some
archs may have the function graph trampoline dependent on operations that
were done in the function trampoline. This causes function graph tracer
to break on those archs.
Instead of having the default be to set the function graph ftrace_ops
to the function graph trampoline, have it instead just set it to zero
which will keep it from jumping to a trampoline that is not set up
to be jumped directly too.
Link: http://lkml.kernel.org/r/53BED155.9040607@nvidia.com
Reported-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Tested-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ring_buffer_poll_wait() should always put the poll_table to its wait_queue
even there is immediate data available. Otherwise, the following epoll and
read sequence will eventually hang forever:
1. Put some data to make the trace_pipe ring_buffer read ready first
2. epoll_ctl(efd, EPOLL_CTL_ADD, trace_pipe_fd, ee)
3. epoll_wait()
4. read(trace_pipe_fd) till EAGAIN
5. Add some more data to the trace_pipe ring_buffer
6. epoll_wait() -> this epoll_wait() will block forever
~ During the epoll_ctl(efd, EPOLL_CTL_ADD,...) call in step 2,
ring_buffer_poll_wait() returns immediately without adding poll_table,
which has poll_table->_qproc pointing to ep_poll_callback(), to its
wait_queue.
~ During the epoll_wait() call in step 3 and step 6,
ring_buffer_poll_wait() cannot add ep_poll_callback() to its wait_queue
because the poll_table->_qproc is NULL and it is how epoll works.
~ When there is new data available in step 6, ring_buffer does not know
it has to call ep_poll_callback() because it is not in its wait queue.
Hence, block forever.
Other poll implementation seems to call poll_wait() unconditionally as the very
first thing to do. For example, tcp_poll() in tcp.c.
Link: http://lkml.kernel.org/p/20140610060637.GA14045@devbig242.prn2.facebook.com
Cc: stable@vger.kernel.org # 2.6.27
Fixes: 2a2cc8f7c4 "ftrace: allow the event pipe to be polled"
Reviewed-by: Chris Mason <clm@fb.com>
Signed-off-by: Martin Lau <kafai@fb.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The TRACE_ITER_PRINTK check in __trace_puts/__trace_bputs is missing,
so add it, to be consistent with __trace_printk/__trace_bprintk.
Those functions are all called by the same function: trace_printk().
Link: http://lkml.kernel.org/p/51E7A7D6.8090900@huawei.com
Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Running my ftrace tests on PowerPC, it failed the test that checks
if function_graph tracer is affected by the stack tracer. It was.
Looking into this, I found that the update_function_graph_func()
must be called even if the trampoline function is not changed.
This is because archs like PowerPC do not support ftrace_ops being
passed by assembly and instead uses a helper function (what the
trampoline function points to). Since this function is not changed
even when multiple ftrace_ops are added to the code, the test that
falls out before calling update_function_graph_func() will miss that
the update must still be done.
Call update_function_graph_function() for all calls to
update_ftrace_function()
Cc: stable@vger.kernel.org # 3.3+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently trace option stacktrace is not applicable for
trace_printk with constant string argument, the reason is
in __trace_puts/__trace_bputs ftrace_trace_stack is missing.
In contrast, when using trace_printk with non constant string
argument(will call into __trace_printk/__trace_bprintk), then
trace option stacktrace is workable, this inconstant result
will confuses users a lot.
Link: http://lkml.kernel.org/p/51E7A7C9.9040401@huawei.com
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Disabling reading and writing to the trace file should not be able to
disable all function tracing callbacks. There's other users today
(like kprobes and perf). Reading a trace file should not stop those
from happening.
Cc: stable@vger.kernel.org # 3.0+
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When there's no entry in set_ftrace_notrace, it'll print nothing, but
it's better to print something like below like set_graph_notrace does:
#### no functions disabled ####
Link: http://lkml.kernel.org/p/1402644246-4649-1-git-send-email-namhyung@kernel.org
Reported-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When there's no entry in set_graph_notrace, it'll print below message
#### all functions enabled ####
While this is technically correct, it's better to print like below:
#### no functions disabled ####
Link: http://lkml.kernel.org/p/1402590233-22321-3-git-send-email-namhyung@kernel.org
Reported-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace_graph_notrace option is for specifying notrace filter for
function graph tracer at boot time. It can be altered after boot
using set_graph_notrace file on the debugfs.
Link: http://lkml.kernel.org/p/1402590233-22321-2-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It seems like it's a leftover from commit 4104d326b6 ("ftrace:
Remove global function list and call function directly"). As it
isn't updated at all, checking its value is meaningless.
Let's get rid of it.
Link: http://lkml.kernel.org/p/1402584972-17824-1-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's several locations in the kernel that open code the calculation
of the next location in the trace_seq buffer. This is usually done with
p->buffer + p->len
Instead of having this open coded, supply a helper function in the
header to do it for them. This function is called trace_seq_buffer_ptr().
Link: http://lkml.kernel.org/p/20140626220129.452783019@goodmis.org
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_seq_reserve() has no users in the kernel, it just wastes space.
Remove it.
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently trace_seq_putmem_hex() can only take as a parameter a pointer
to something that is 8 bytes or less, otherwise it will overflow the
buffer. This is protected by a macro that encompasses the call to
trace_seq_putmem_hex() that has a BUILD_BUG_ON() for the variable before
it is passed in. This is not very robust and if trace_seq_putmem_hex() ever
gets used outside that macro it will cause issues.
Instead of only being able to produce a hex output of memory that is for
a single word, change it to be more robust and allow any size input.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For using trace_seq_*() functions in NMI context, I posted a patch to move
it to the lib/ directory. This caused Andrew Morton to take a look at the code.
He went through and gave a lot of comments about missing kernel doc,
inconsistent types for the save variable, mix match of EXPORT_SYMBOL_GPL()
and EXPORT_SYMBOL() as well as missing EXPORT_SYMBOL*()s. There were
a few comments about the way variables were being compared (int vs uint).
All these were good review comments and should be implemented regardless of
if trace_seq.c should be moved to lib/ or not.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_seq_*() functions are a nice utility that allows users to manipulate
buffers with printf() like formats. It has its own trace_seq.h header in
include/linux and should be in its own file. Being tied with trace_output.c
is rather awkward.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Simplify ftrace_hash_disable/enable path in ftrace_hash_move
for hardening the process if the memory allocation failed.
Link: http://lkml.kernel.org/p/20140617110442.15167.81076.stgit@kbuild-fedora.novalocal
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The enabled_functions is used to help debug the dynamic function tracing.
Adding what trampolines are attached to files is useful for debugging.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Function graph tracing is a bit different than the function tracers, as
it is processed after either the ftrace_caller or ftrace_regs_caller
and we only have one place to modify the jump to ftrace_graph_caller,
the jump needs to happen after the restore of registeres.
The function graph tracer is dependent on the function tracer, where
even if the function graph tracing is going on by itself, the save and
restore of registers is still done for function tracing regardless of
if function tracing is happening, before it calls the function graph
code.
If there's no function tracing happening, it is possible to just call
the function graph tracer directly, and avoid the wasted effort to save
and restore regs for function tracing.
This requires adding new flags to the dyn_ftrace records:
FTRACE_FL_TRAMP
FTRACE_FL_TRAMP_EN
The first is set if the count for the record is one, and the ftrace_ops
associated to that record has its own trampoline. That way the mcount code
can call that trampoline directly.
In the future, trampolines can be added to arbitrary ftrace_ops, where you
can have two or more ftrace_ops registered to ftrace (like kprobes and perf)
and if they are not tracing the same functions, then instead of doing a
loop to check all registered ftrace_ops against their hashes, just call the
ftrace_ops trampoline directly, which would call the registered ftrace_ops
function directly.
Without this patch perf showed:
0.05% hackbench [kernel.kallsyms] [k] ftrace_caller
0.05% hackbench [kernel.kallsyms] [k] arch_local_irq_save
0.05% hackbench [kernel.kallsyms] [k] native_sched_clock
0.04% hackbench [kernel.kallsyms] [k] __buffer_unlock_commit
0.04% hackbench [kernel.kallsyms] [k] preempt_trace
0.04% hackbench [kernel.kallsyms] [k] prepare_ftrace_return
0.04% hackbench [kernel.kallsyms] [k] __this_cpu_preempt_check
0.04% hackbench [kernel.kallsyms] [k] ftrace_graph_caller
See that the ftrace_caller took up more time than the ftrace_graph_caller
did.
With this patch:
0.05% hackbench [kernel.kallsyms] [k] __buffer_unlock_commit
0.04% hackbench [kernel.kallsyms] [k] call_filter_check_discard
0.04% hackbench [kernel.kallsyms] [k] ftrace_graph_caller
0.04% hackbench [kernel.kallsyms] [k] sched_clock
The ftrace_caller is no where to be found and ftrace_graph_caller still
takes up the same percentage.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The usage of uprobe_buffer_enable() added by dcad1a20 is very wrong,
1. uprobe_buffer_enable() and uprobe_buffer_disable() are not balanced,
_enable() should be called only if !enabled.
2. If uprobe_buffer_enable() fails probe_event_enable() should clear
tp.flags and free event_file_link.
3. If uprobe_register() fails it should do uprobe_buffer_disable().
Link: http://lkml.kernel.org/p/20140627170146.GA18332@redhat.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Fixes: dcad1a204f "tracing/uprobes: Fetch args before reserving a ring buffer"
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I do not know why dd9fa555d7 "tracing/uprobes: Move argument fetching
to uprobe_dispatcher()" added the UPROBE_HANDLER_REMOVE, but it looks
wrong.
OK, perhaps it makes sense to avoid store_trace_args() if the tracee is
nacked by uprobe_perf_filter(). But then we should kill the same code
in uprobe_perf_func() and unify the TRACE/PROFILE filtering (we need to
do this anyway to mix perf/ftrace). Until then this code actually adds
the pessimization because uprobe_perf_filter() will be called twice and
return T in likely case.
Link: http://lkml.kernel.org/p/20140627170143.GA18329@redhat.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This reverts commit 43fe98913c.
This patch is very wrong. Firstly, this change leads to unbalanced
uprobe_unregister(). Just for example,
# perf probe -x /lib/libc.so.6 syscall
# echo 1 >> /sys/kernel/debug/tracing/events/probe_libc/enable
# perf record -e probe_libc:syscall whatever
after that uprobe is dead (unregistered) but the user of ftrace/perf
can't know this, and it looks as if nobody hits this probe.
This would be easy to fix, but there are other reasons why it is not
simple to mix ftrace and perf. If nothing else, they can't share the
same ->consumer.filter. This is fixable too, but probably we need to
fix the poorly designed uprobe_register() interface first. At least
"register" and "apply" should be clearly separated.
Link: http://lkml.kernel.org/p/20140627170136.GA18319@redhat.com
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com>
Cc: stable@vger.kernel.org # v3.14
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace dynamic record has a flags element that also has a counter.
Instead of hard coding "rec->flags & ~FTRACE_FL_MASK" all over the
place. Use a macro instead.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When registering a function callback for the function tracer, the ops
can specify if it wants to save full regs (like an interrupt would)
for each function that it traces, or if it does not care about regs
and just wants to have the fastest return possible.
Once a ops has registered a function, if other ops register that
function they all will receive the regs too. That's because it does
the work once, it does it for everyone.
Now if the ops wanting regs unregisters the function so that there's
only ops left that do not care about regs, those ops will still
continue getting regs and going through the work for it on that
function. This is because the disabling of the rec counter only
sees the ops registered, and does not see the ops that are still
attached, and does not know if the current ops that are still attached
want regs or not. To play it safe, it just keeps regs being processed
until no function is registered anymore.
Instead of doing that, check the ops that are still registered for that
function and if none want regs for it anymore, then disable the
processing of regs.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
if "possible cpus" is greater than actual CPUs (including offline CPUs).
Namhyung Kim did some reviews of the patches I sent this merge window and
found a memory leak and had a few clean ups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTmcYfAAoJEKQekfcNnQGusVIH/2wvfh1D4Mu+qCUsG7HqMLWM
wHhTHcJsiE5rBpfcvc+XoLLBMGn9IKCeClGG59KYJGzznbJHHLmk1dy4qdSqNAel
POTEtGh+AUX0wFBZtVLl2AesFZRsbtaxoNqD0ZBLhkHCV9FBEKbsm8uDCtJIf8wR
vDDz27nPXkiFWX+wM9Z+tFSL7rohxvwREKlQjfk5Z9plyUcURE8GDbrWl870ZSJX
uYzSYzioCyYdy/cpasDuTX22/I+nNUxA4dWTeyciigYC+6IqLJRIwqEXJ4RjYmfm
v9+hf6KkqF8CY6mDjObLkKmy0gubPBQ8Op1G/3ChluUrjkwdffgb6oiLb352yHY=
=XD1A
-----END PGP SIGNATURE-----
Merge tag 'trace-3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing cleanups and bugfixes from Steven Rostedt:
"One bug fix that goes back to 3.10. Accessing a non existent buffer
if "possible cpus" is greater than actual CPUs (including offline
CPUs).
Namhyung Kim did some reviews of the patches I sent this merge window
and found a memory leak and had a few clean ups"
* tag 'trace-3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix check of ftrace_trace_arrays list_empty() check
tracing: Fix leak of per cpu max data in instances
tracing: Cleanup saved_cmdlines_size changes
ring-buffer: Check if buffer exists before polling
Pull more perf updates from Ingo Molnar:
"A second round of perf updates:
- wide reaching kprobes sanitization and robustization, with the hope
of fixing all 'probe this function crashes the kernel' bugs, by
Masami Hiramatsu.
- uprobes updates from Oleg Nesterov: tmpfs support, corner case
fixes and robustization work.
- perf tooling updates and fixes from Jiri Olsa, Namhyung Ki, Arnaldo
et al:
* Add support to accumulate hist periods (Namhyung Kim)
* various fixes, refactorings and enhancements"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
perf: Differentiate exec() and non-exec() comm events
perf: Fix perf_event_comm() vs. exec() assumption
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates
perf/documentation: Add description for conditional branch filter
perf/x86: Add conditional branch filtering support
perf/tool: Add conditional branch filter 'cond' to perf record
perf: Add new conditional branch filter 'PERF_SAMPLE_BRANCH_COND'
uprobes: Teach copy_insn() to support tmpfs
uprobes: Shift ->readpage check from __copy_insn() to uprobe_register()
perf/x86: Use common PMU interrupt disabled code
perf/ARM: Use common PMU interrupt disabled code
perf: Disable sampled events if no PMU interrupt
perf: Fix use after free in perf_remove_from_context()
perf tools: Fix 'make help' message error
perf record: Fix poll return value propagation
perf tools: Move elide bool into perf_hpp_fmt struct
perf tools: Remove elide setup for SORT_MODE__MEMORY mode
perf tools: Fix "==" into "=" in ui_browser__warning assignment
perf tools: Allow overriding sysfs and proc finding with env var
perf tools: Consider header files outside perf directory in tags target
...
The check that tests if ftrace_trace_arrays is empty in
top_trace_array(), uses the .prev pointer:
if (list_empty(ftrace_trace_arrays.prev))
instead of testing the variable itself:
if (list_empty(&ftrace_trace_arrays))
Although it is technically correct, it is awkward and confusing.
Use the proper method.
Link: http://lkml.kernel.org/r/87oay1bas8.fsf@sejong.aot.lge.com
Reported-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The freeing of an instance, if max data is configured, there will be
per cpu data structures created. But these are not freed when the instance
is deleted, which causes a memory leak.
A new helper function is added that frees the individual buffers within a
trace array, instead of duplicating the code. This way changes made for one
are applied to the other (normal buffer vs max buffer).
Link: http://lkml.kernel.org/r/87k38pbake.fsf@sejong.aot.lge.com
Reported-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The recent addition of saved_cmdlines_size file had some remaining
(minor - mostly coding style) issues. Fix them by passing pointer
name to sizeof() and using scnprintf().
Link: http://lkml.kernel.org/p/1402384295-23680-1-git-send-email-namhyung@kernel.org
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The per_cpu buffers are created one per possible CPU. But these do
not mean that those CPUs are online, nor do they even exist.
With the addition of the ring buffer polling, it assumes that the
caller polls on an existing buffer. But this is not the case if
the user reads trace_pipe from a CPU that does not exist, and this
causes the kernel to crash.
Simple fix is to check the cpu against buffer bitmask against to see
if the buffer was allocated or not and return -ENODEV if it is
not.
More updates were done to pass the -ENODEV back up to userspace.
Link: http://lkml.kernel.org/r/5393DB61.6060707@oracle.com
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
to help out the rest of the kernel to ease their use of trace events.
The big change for this release is the allowing of other tracers,
such as the latency tracers, to be used in the trace instances and allow
for function or function graph tracing to be in the top level
simultaneously.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTlbUqAAoJEKQekfcNnQGuP+8H+wTBG06beHsqe6XcaeXcKNkt
Mimm0O04oQdw89CBWeJvXyOwRTtiN4M/4hxHXBTDtChxM9oUyWw1o0IpSMMuQ16O
w9r3DfC8e1air+ufEuYWM0QNtyzHi8EfDSNia55ON5jvtkCZTXOEKZD+n8M9w28p
I7PVgr0PDztsCpethCpg0M8beK9zuQPWMzsHAQCsKI06Xl5z33kPIJR15Exh+Kr1
uVVTZW7JFVAPuSnteLSIx9pN6OjsVGzOZCljg+O+9/v/02u5nkMiS2nURxae86kg
RTSiRYT6Hvl/MCBhdss/w5kgSk6BYiZ0hXbLtwetvre+vQrOR5CnDw2DxZ7e+gU=
=oudH
-----END PGP SIGNATURE-----
Merge tag 'trace-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Lots of tweaks, small fixes, optimizations, and some helper functions
to help out the rest of the kernel to ease their use of trace events.
The big change for this release is the allowing of other tracers, such
as the latency tracers, to be used in the trace instances and allow
for function or function graph tracing to be in the top level
simultaneously"
* tag 'trace-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
tracing: Fix memory leak on instance deletion
tracing: Fix leak of ring buffer data when new instances creation fails
tracing/kprobes: Avoid self tests if tracing is disabled on boot up
tracing: Return error if ftrace_trace_arrays list is empty
tracing: Only calculate stats of tracepoint benchmarks for 2^32 times
tracing: Convert stddev into u64 in tracepoint benchmark
tracing: Introduce saved_cmdlines_size file
tracing: Add __get_dynamic_array_len() macro for trace events
tracing: Remove unused variable in trace_benchmark
tracing: Eliminate double free on failure of allocation on boot up
ftrace/x86: Call text_ip_addr() instead of the duplicated code
tracing: Print max callstack on stacktrace bug
tracing: Move locking of trace_cmdline_lock into start/stop seq calls
tracing: Try again for saved cmdline if failed due to locking
tracing: Have saved_cmdlines use the seq_read infrastructure
tracing: Add tracepoint benchmark tracepoint
tracing: Print nasty banner when trace_printk() is in use
tracing: Add funcgraph_tail option to print function name after closing braces
tracing: Eliminate duplicate TRACE_GRAPH_PRINT_xx defines
tracing: Add __bitmask() macro to trace events to cpumasks and other bitmasks
...
When an instance is created, it also gets a snapshot ring buffer
allocated (with minimum of pages). But when it is deleted the snapshot
buffer is not. There was a helper function added to match the allocation
of these ring buffers to a way to free them, but it wasn't used by
the deletion of an instance. Using that helper function solves this
memory leak.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Yoshihiro Yunomae reported that the ring buffer data for a trace
instance does not get properly cleaned up when it fails. He proposed
a patch that manually cleaned the data up and addad a bunch of labels.
The labels are not needed because all trace array is allocated with
a kzalloc which initializes it to 0 and all kfree()s can take a NULL
pointer and will ignore it.
Adding a new helper function free_trace_buffers() that can also take
null buffers to free the buffers that were allocated by
allocate_trace_buffers().
Link: http://lkml.kernel.org/r/20140605223522.32311.31664.stgit@yunodevel
Reported-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If tracing is disabled on boot up, the kernel should not execute tracing
self tests. The kernel should check whether tracing is disabled or not
before executing any of the tracing self tests.
Link: http://lkml.kernel.org/p/20140605223520.32311.56097.stgit@yunodevel
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_trace_arrays links global_trace.list. However, global_trace
is not added to ftrace_trace_arrays if trace_alloc_buffers() failed.
As the result, ftrace_trace_arrays becomes an empty list. If
ftrace_trace_arrays is an empty list, current top_trace_array() returns
an invalid pointer. As the result, the kernel can induce memory corruption
or panic.
Current implementation does not check whether ftrace_trace_arrays is empty
list or not. So, in this patch, if ftrace_trace_arrays is empty list,
top_trace_array() returns NULL. Moreover, this patch makes all functions
calling top_trace_array() handle it appropriately.
Link: http://lkml.kernel.org/p/20140605223517.32311.99233.stgit@yunodevel
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When calculating the average and standard deviation, it is required that
the count be less than UINT_MAX, otherwise the do_div() will get
undefined results. After 2^32 counts of data, the average and standard
deviation should pretty much be set anyway.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I've been told that do_div() expects an unsigned 64 bit number, and
is undefined if a signed is used. This gave a warning on the MIPS
build. I'm not sure if a signed 64 bit dividend is really an issue
or not, but the calculation this is used for is standard deviation,
and that isn't going to be negative. We can just convert it to
unsigned and be safe.
Reported-by: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Introduce saved_cmdlines_size file for changing the number of saved pid-comms.
saved_cmdlines currently stores 128 command names using SAVED_CMDLINES, but
'no-existing processes' names are often lost in saved_cmdlines when we
read the trace data. So, by introducing saved_cmdlines_size file, we can
now change the 128 command names saved to something much larger if needed.
When we write a value to saved_cmdlines_size, the number of the value will
be stored in pid-comm list:
# echo 1024 > /sys/kernel/debug/tracing/saved_cmdlines_size
Here, 1024 command names can be stored. The default number is 128 and the maximum
number is PID_MAX_DEFAULT (=32768 if CONFIG_BASE_SMALL is not set). So, if we
want to avoid losing any command names, we need to set 32768 to
saved_cmdlines_size.
We can read the maximum number of the list:
# cat /sys/kernel/debug/tracing/saved_cmdlines_size
128
Link: http://lkml.kernel.org/p/20140605012427.22115.16173.stgit@yunodevel
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Somehow this unused variable warning sneaked past my warnings check
(probably due to it depending on a new config).
kernel/trace/trace_benchmark.c: In function 'trace_do_benchmark':
kernel/trace/trace_benchmark.c:38:6: warning: unused variable 'seedsq' [-Wunused-variable]
u64 seedsq;
^
Link: http://lkml.kernel.org/r/20140604160921.4f4e69c4@canb.auug.org.au
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If allocation of the max_buffer fails on boot up, the error path will
free both per_cpu data structures from the buffers. With the new redesign
of the code, those structures are freed if allocations failed. That is,
the helper function that allocates the buffers will free the per cpu data
on failure. No need to do it again. In fact, the second free will cause
a bug as the code can not handle a double free.
Link: http://lkml.kernel.org/p/20140603042803.27308.30956.stgit@yunodevel
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the conversion of the saved_cmdlines output to use seq_read, there
is now a race between accessing the values of the saved_cmdlines and
the writing to them. The trace_cmdline_lock needs to be taken at
the start and stop of the seq calls.
A new __trace_find_cmdline() call is created to allow for the look up
to happen without taking the lock.
Fixes: 42584c81c5 tracing: Have saved_cmdlines use the seq_read infrastructure
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In order to prevent the saved cmdline cache from being filled when
tracing is not active, the comms are only recorded after a trace event
is recorded.
The problem is, a comm can fail to be recorded if the trace_cmdline_lock
is held. That lock is taken via a trylock to allow it to happen from
any context (including NMI). If the lock fails to be taken, the comm
is skipped. No big deal, as we will try again later.
But! Because of the code that was added to only record after an event,
we may not try again later as the recording is made as a oneshot per
event per CPU.
Only disable the recording of the comm if the comm is actually recorded.
Fixes: 7ffbd48d5c "tracing: Cache comms only after an event occurred"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Current tracing_saved_cmdlines_read() implementation is naive; It allocates
a large buffer, constructs output data to that buffer for each read
operation, and then copies a portion of the buffer to the user space
buffer. This has several issues such as slow memory allocation, high
CPU usage, and even corruption of the output data.
The seq_read infrastructure is made to handle this type of work.
By converting it to use seq_read() the code becomes smaller, simplified,
as well as correct.
Link: http://lkml.kernel.org/p/20140220084431.3839.51793.stgit@yunodevel
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In order to help benchmark the time tracepoints take, a new config
option is added called CONFIG_TRACEPOINT_BENCHMARK. When this option
is set a tracepoint is created called "benchmark:benchmark_event".
When the tracepoint is enabled, it kicks off a kernel thread that
goes into an infinite loop (calling cond_sched() to let other tasks
run), and calls the tracepoint. Each iteration will record the time
it took to write to the tracepoint and the next iteration that
data will be passed to the tracepoint itself. That is, the tracepoint
will report the time it took to do the previous tracepoint.
The string written to the tracepoint is a static string of 128 bytes
to keep the time the same. The initial string is simply a write of
"START". The second string records the cold cache time of the first
write which is not added to the rest of the calculations.
As it is a tight loop, it benchmarks as hot cache. That's fine because
we care most about hot paths that are probably in cache already.
An example of the output:
START
first=3672 [COLD CACHED]
last=632 first=3672 max=632 min=632 avg=316 std=446 std^2=199712
last=278 first=3672 max=632 min=278 avg=303 std=316 std^2=100337
last=277 first=3672 max=632 min=277 avg=296 std=258 std^2=67064
last=273 first=3672 max=632 min=273 avg=292 std=224 std^2=50411
last=273 first=3672 max=632 min=273 avg=288 std=200 std^2=40389
last=281 first=3672 max=632 min=273 avg=287 std=183 std^2=33666
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_printk() is used to debug fast paths within the kernel. Places
that gets called in any context (interrupt or NMI) or thousands of
times a second. Something you do not want to do with a printk().
In order to make it completely lockless as it needs a temporary buffer
to handle some of the string formatting, a page is created per cpu for
every context (four per cpu; normal, softirq, irq, NMI).
Since trace_printk() should only be used for debugging purposes,
there's no reason to waste memory on these buffers on a production
system. That means, trace_printk() should never be used unless a
developer is debugging their kernel. There's macro magic to allocate
the buffers if trace_printk() is used anywhere in the kernel.
To help enforce that trace_printk() isn't used outside of development,
when it is used, a nasty banner is displayed on bootup (or when a module
is loaded that uses trace_printk() and the kernel core does not).
Here's the banner:
**********************************************************
** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
** **
** trace_printk() being used. Allocating extra memory. **
** **
** This means that this is a DEBUG kernel and it is **
** unsafe for produciton use. **
** **
** If you see this message and you are not debugging **
** the kernel, report this immediately to your vendor! **
** **
** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
**********************************************************
That should hopefully keep developers from trying to sneak in a
trace_printk() or two.
Link: http://lkml.kernel.org/p/20140528131440.2283213c@gandalf.local.home
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In the function-graph tracer, add a funcgraph_tail option
to print the function name on all } lines, not just
functions whose first line is no longer in the trace
buffer.
If a function calls other traced functions, its total
time appears on its } line. This change allows grep
to be used to determine the function for which the
line corresponds.
Update Documentation/trace/ftrace.txt to describe
this new option.
Link: http://lkml.kernel.org/p/20140520221041.8359.6782.stgit@beardog.cce.hp.com
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Eliminate duplicate TRACE_GRAPH_PRINT_xx defines
in trace_functions_graph.c that are already in
trace.h.
Add TRACE_GRAPH_PRINT_IRQS to trace.h, which is
the only one that is missing.
Link: http://lkml.kernel.org/p/20140520221031.8359.24733.stgit@beardog.cce.hp.com
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Being able to show a cpumask of events can be useful as some events
may affect only some CPUs. There is no standard way to record the
cpumask and converting it to a string is rather expensive during
the trace as traces happen in hotpaths. It would be better to record
the raw event mask and be able to parse it at print time.
The following macros were added for use with the TRACE_EVENT() macro:
__bitmask()
__assign_bitmask()
__get_bitmask()
To test this, I added this to the sched_migrate_task event, which
looked like this:
TRACE_EVENT(sched_migrate_task,
TP_PROTO(struct task_struct *p, int dest_cpu, const struct cpumask *cpus),
TP_ARGS(p, dest_cpu, cpus),
TP_STRUCT__entry(
__array( char, comm, TASK_COMM_LEN )
__field( pid_t, pid )
__field( int, prio )
__field( int, orig_cpu )
__field( int, dest_cpu )
__bitmask( cpumask, num_possible_cpus() )
),
TP_fast_assign(
memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
__entry->pid = p->pid;
__entry->prio = p->prio;
__entry->orig_cpu = task_cpu(p);
__entry->dest_cpu = dest_cpu;
__assign_bitmask(cpumask, cpumask_bits(cpus), num_possible_cpus());
),
TP_printk("comm=%s pid=%d prio=%d orig_cpu=%d dest_cpu=%d cpumask=%s",
__entry->comm, __entry->pid, __entry->prio,
__entry->orig_cpu, __entry->dest_cpu,
__get_bitmask(cpumask))
);
With the output of:
ksmtuned-3613 [003] d..2 485.220508: sched_migrate_task: comm=ksmtuned pid=3615 prio=120 orig_cpu=3 dest_cpu=2 cpumask=00000000,0000000f
migration/1-13 [001] d..5 485.221202: sched_migrate_task: comm=ksmtuned pid=3614 prio=120 orig_cpu=1 dest_cpu=0 cpumask=00000000,0000000f
awk-3615 [002] d.H5 485.221747: sched_migrate_task: comm=rcu_preempt pid=7 prio=120 orig_cpu=0 dest_cpu=1 cpumask=00000000,000000ff
migration/2-18 [002] d..5 485.222062: sched_migrate_task: comm=ksmtuned pid=3615 prio=120 orig_cpu=2 dest_cpu=3 cpumask=00000000,0000000f
Link: http://lkml.kernel.org/r/1399377998-14870-6-git-send-email-javi.merino@arm.com
Link: http://lkml.kernel.org/r/20140506132238.22e136d1@gandalf.local.home
Suggested-by: Javi Merino <javi.merino@arm.com>
Tested-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As the decision to what needs to be done (converting a call to the
ftrace_caller to ftrace_caller_regs or to convert from ftrace_caller_regs
to ftrace_caller) can easily be determined from the rec->flags of
FTRACE_FL_REGS and FTRACE_FL_REGS_EN, there's no need to have the
ftrace_check_record() return either a UPDATE_MODIFY_CALL_REGS or a
UPDATE_MODIFY_CALL. Just he latter is enough. This added flag causes
more complexity than is required. Remove it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the moving of the functions that determine what the mcount call site
should be replaced with into the generic code, there is a few places
in the generic code that can use them instead of hard coding it as it
does.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move and rename get_ftrace_addr() and get_ftrace_addr_old() to
ftrace_get_addr_new() and ftrace_get_addr_curr() respectively.
This moves these two helper functions in the generic code out from
the arch specific code, and renames them to have a better generic
name. This will allow other archs to use them as well as makes it
a bit easier to work on getting separate trampolines for different
functions.
ftrace_get_addr_new() returns the trampoline address that the mcount
call address will be converted to.
ftrace_get_addr_curr() returns the trampoline address of what the
mcount call address currently jumps to.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace_hash_empty() function is a simple test:
return !hash || !hash->count;
But gcc seems to want to make it a call. As this is in an extreme
hot path of the function tracer, there's no reason it needs to be
a call. I only wrote it to be a helper function anyway, otherwise
it would have been inlined manually.
Force gcc to inline it, as it could have also been a macro.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Back in 2011 Commit ed926f9b35 "ftrace: Use counters to enable
functions to trace" changed the way ftrace accounts for enabled
and disabled traced functions. There was a comment started as:
/*
*
*/
But never finished. Well, that's rather useless. I probably forgot
to save the file before committing it. And it passed review from all
this time.
Anyway, better late than never. I updated the comment to express what
is happening in that somewhat complex code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 4104d326b6 "ftrace: Remove global function list and call
function directly" cleaned up the global_ops filtering and made
the code simpler, but it left a variable "hash_enable" that was used
to know if the hash functions should be updated or not. It was
updated if the global_ops did not override them. As the global_ops
are now no different than any other ftrace_ops, the hash always
gets updated and there's no reason to use the hash_enable boolean.
The same goes for hash_disable used in ftrace_shutdown().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Replace uses of &__get_cpu_var for address calculation with this_cpu_ptr.
Link: http://lkml.kernel.org/p/alpine.DEB.2.10.1404291415560.18364@gentwo.org
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As trace event triggers are now part of the mainline kernel, I added
my trace event trigger tests to my test suite I run on all my kernels.
Now these tests get run under different config options, and one of
those options is CONFIG_PROVE_RCU, which checks under lockdep that
the rcu locking primitives are being used correctly. This triggered
the following splat:
===============================
[ INFO: suspicious RCU usage. ]
3.15.0-rc2-test+ #11 Not tainted
-------------------------------
kernel/trace/trace_events_trigger.c:80 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
4 locks held by swapper/1/0:
#0: ((&(&j_cdbs->work)->timer)){..-...}, at: [<ffffffff8104d2cc>] call_timer_fn+0x5/0x1be
#1: (&(&pool->lock)->rlock){-.-...}, at: [<ffffffff81059856>] __queue_work+0x140/0x283
#2: (&p->pi_lock){-.-.-.}, at: [<ffffffff8106e961>] try_to_wake_up+0x2e/0x1e8
#3: (&rq->lock){-.-.-.}, at: [<ffffffff8106ead3>] try_to_wake_up+0x1a0/0x1e8
stack backtrace:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-rc2-test+ #11
Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006
0000000000000001 ffff88007e083b98 ffffffff819f53a5 0000000000000006
ffff88007b0942c0 ffff88007e083bc8 ffffffff81081307 ffff88007ad96d20
0000000000000000 ffff88007af2d840 ffff88007b2e701c ffff88007e083c18
Call Trace:
<IRQ> [<ffffffff819f53a5>] dump_stack+0x4f/0x7c
[<ffffffff81081307>] lockdep_rcu_suspicious+0x107/0x110
[<ffffffff810ee51c>] event_triggers_call+0x99/0x108
[<ffffffff810e8174>] ftrace_event_buffer_commit+0x42/0xa4
[<ffffffff8106aadc>] ftrace_raw_event_sched_wakeup_template+0x71/0x7c
[<ffffffff8106bcbf>] ttwu_do_wakeup+0x7f/0xff
[<ffffffff8106bd9b>] ttwu_do_activate.constprop.126+0x5c/0x61
[<ffffffff8106eadf>] try_to_wake_up+0x1ac/0x1e8
[<ffffffff8106eb77>] wake_up_process+0x36/0x3b
[<ffffffff810575cc>] wake_up_worker+0x24/0x26
[<ffffffff810578bc>] insert_work+0x5c/0x65
[<ffffffff81059982>] __queue_work+0x26c/0x283
[<ffffffff81059999>] ? __queue_work+0x283/0x283
[<ffffffff810599b7>] delayed_work_timer_fn+0x1e/0x20
[<ffffffff8104d3a6>] call_timer_fn+0xdf/0x1be^M
[<ffffffff8104d2cc>] ? call_timer_fn+0x5/0x1be
[<ffffffff81059999>] ? __queue_work+0x283/0x283
[<ffffffff8104d823>] run_timer_softirq+0x1a4/0x22f^M
[<ffffffff8104696d>] __do_softirq+0x17b/0x31b^M
[<ffffffff81046d03>] irq_exit+0x42/0x97
[<ffffffff81a08db6>] smp_apic_timer_interrupt+0x37/0x44
[<ffffffff81a07a2f>] apic_timer_interrupt+0x6f/0x80
<EOI> [<ffffffff8100a5d8>] ? default_idle+0x21/0x32
[<ffffffff8100a5d6>] ? default_idle+0x1f/0x32
[<ffffffff8100ac10>] arch_cpu_idle+0xf/0x11
[<ffffffff8107b3a4>] cpu_startup_entry+0x1a3/0x213
[<ffffffff8102a23c>] start_secondary+0x212/0x219
The cause is that the triggers are protected by rcu_read_lock_sched() but
the data is dereferenced with rcu_dereference() which expects it to
be protected with rcu_read_lock(). The proper reference should be
rcu_dereference_sched().
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 4104d326b6 "ftrace: Remove global function list and call
function directly" cleaned up the global_ops filtering and made
the code simpler. But it left out function graph filtering which
also depended on that code. The function graph filtering still
needs to use global_ops as the filter otherwise it wont filter
at all.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
uprobe_perf_open()->uprobe_apply() can fail, but this error is wrongly
ignored. Change uprobe_perf_open() to do uprobe_perf_close() and return
the error code in this case.
Change uprobe_perf_close() to propogate the error from uprobe_apply()
as well, although it should not fail.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Preparation. Move uprobe_perf_close() up before uprobe_perf_open() to
avoid the forward declaration in the next patch and make it readable.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Now that the ring buffer has a built in way to wake up readers
when there's data, using irq_work such that it is safe to do it
in any context. But it was still using the old "poor man's"
wait polling that checks every 1/10 of a second to see if it
should wake up a waiter. This makes the latency for a wake up
excruciatingly long. No need to do that anymore.
Completely remove the different wait_poll types from the tracers
and have them all use the default one now.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When reading from trace_pipe, if tracing is off but nothing was read
it should block. If something is read and tracing is off, then EOF
is returned. If tracing is on and there's nothing to read, it will block.
But because the check of whether tracing is off and something was read
is done after the block on the pipe, it is hit or miss if the EOF is
returned or not leading to inconsistent behavior.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A race exists between module loading and enabling of function tracer.
CPU 1 CPU 2
----- -----
load_module()
module->state = MODULE_STATE_COMING
register_ftrace_function()
mutex_lock(&ftrace_lock);
ftrace_startup()
update_ftrace_function();
ftrace_arch_code_modify_prepare()
set_all_module_text_rw();
<enables-ftrace>
ftrace_arch_code_modify_post_process()
set_all_module_text_ro();
[ here all module text is set to RO,
including the module that is
loading!! ]
blocking_notifier_call_chain(MODULE_STATE_COMING);
ftrace_init_module()
[ tries to modify code, but it's RO, and fails!
ftrace_bug() is called]
When this race happens, ftrace_bug() will produces a nasty warning and
all of the function tracing features will be disabled until reboot.
The simple solution is to treate module load the same way the core
kernel is treated at boot. To hardcode the ftrace function modification
of converting calls to mcount into nops. This is done in init/main.c
there's no reason it could not be done in load_module(). This gives
a better control of the changes and doesn't tie the state of the
module to its notifiers as much. Ftrace is special, it needs to be
treated as such.
The reason this would work, is that the ftrace_module_init() would be
called while the module is in MODULE_STATE_UNFORMED, which is ignored
by the set_all_module_text_ro() call.
Link: http://lkml.kernel.org/r/1395637826-3312-1-git-send-email-indou.takao@jp.fujitsu.com
Reported-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@vger.kernel.org # 2.6.38+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The functions ftrace_set_global_filter() and ftrace_set_global_notrace()
still have their old names in the kernel doc (ftrace_set_filter and
ftrace_set_notrace respectively). Replace these with the real names.
Link: http://lkml.kernel.org/p/1398006644-5935-3-git-send-email-wangjiaxing@insigma.com.cn
Signed-off-by: Jiaxing Wang <wangjiaxing@insigma.com.cn>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When using ftrace_ops_list_func, we should skip 4 instead of 3,
to avoid ftrace_call+0x5/0xb appearing in the stack trace:
Depth Size Location (110 entries)
----- ---- --------
0) 2956 0 update_curr+0xe/0x1e0
1) 2956 68 ftrace_call+0x5/0xb
2) 2888 92 enqueue_entity+0x53/0xe80
3) 2796 80 enqueue_task_fair+0x47/0x7e0
4) 2716 28 enqueue_task+0x45/0x70
5) 2688 12 activate_task+0x22/0x30
Add a function using_ftrace_ops_list_func() to test for this while keeping
ftrace_ops_list_func to remain static.
Link: http://lkml.kernel.org/p/1398006644-5935-2-git-send-email-wangjiaxing@insigma.com.cn
Signed-off-by: Jiaxing Wang <wangjiaxing@insigma.com.cn>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use NOKPROBE_SYMBOL macro to protect functions from
kprobes instead of __kprobes annotation in ftrace.
This applies nokprobe_inline annotation for some cases,
because NOKPROBE_SYMBOL() will inhibit inlining by
referring the symbol address.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140417081828.26341.55152.stgit@ltc230.yrl.intra.hitachi.co.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is no need to prohibit probing on the functions
used for preparation and uprobe only fetch functions.
Those are safely probed because those are not invoked
from kprobe's breakpoint/fault/debug handlers. So there
is no chance to cause recursive exceptions.
Following functions are now removed from the kprobes blacklist:
update_bitfield_fetch_param
free_bitfield_fetch_param
kprobe_register
FETCH_FUNC_NAME(stack, type) in trace_uprobe.c
FETCH_FUNC_NAME(memory, type) in trace_uprobe.c
FETCH_FUNC_NAME(memory, string) in trace_uprobe.c
FETCH_FUNC_NAME(memory, string_size) in trace_uprobe.c
FETCH_FUNC_NAME(file_offset, type) in trace_uprobe.c
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140417081800.26341.56504.stgit@ltc230.yrl.intra.hitachi.co.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds static to the following functions:
-cycle_t buffer_ftrace_now
-void free_snapshot
-int trace_selftest_startup_dynamic_tracing
Link: http://lkml.kernel.org/p/20140417214442.d7abc7c0b0e4b90e7fedecc9@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Instead of initializing the pm notifier block in register_ftrace_graph(),
initialize it statically. This safes us some code.
Found in the PaX patch, written by the PaX Team.
Link: http://lkml.kernel.org/p/1396186310-3156-1-git-send-email-minipli@googlemail.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: PaX Team <pageexec@freemail.hu>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The irqsoff, preemptoff and preemptirqsoff tracers can now be used by
instances. But they may only be used by one instance at a time (including
the top level directory). This allows multiple tracers to run while the
irqsoff (and friends) tracer is running simultaneously.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The wakeup and wakeup_rt tracers can now be used by instances.
But they may only be used by one instance at a time (including the
top level directory). This allows multiple tracers to run while
the wakeup tracer is running simultaneously.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In preparation for having tracers enabled in instances, the max_lock
should be unique as updating the max for one tracer is a separate
operation than updating it for another tracer using a different max.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In preparation for letting the latency tracers be used by instances,
remove the global tracing_max_latency variable and add a max_latency
field to the trace_array that the latency tracers will now use.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Instead of having a list of global functions that are called,
as only one global function is allow to be enabled at a time, there's
no reason to have a list.
Instead, simply have all the users of the global ops, use the global ops
directly, instead of registering their own ftrace_ops. Just switch what
function is used before enabling the function tracer.
This removes a lot of code as well as the complexity involved with it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The first is to remove a duplication of creating debugfs files that
already exist and causes an error report to be printed due to the
failure of the second creation.
The second is a memory leak fix that was introduced in 3.14.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTUGZwAAoJEKQekfcNnQGu7W8IAIAMBVfrWdP6cmGle4tGfhVE
sHcwqTH+07oANQJ3eFwFs5wBMb08s3hXwUHUxXcpjyq2Bs+AHr0vSL/nqCG4k8Ap
2T4ntL7esC1BWKw2lVVVYD12FiL7grUXVlx/q0WE2NuhCzWzNRTyb8sKrPoCRUEB
3o5rAt9+45PKUb2k/eqGBGhK8b4XDz2Wtk5Gj6YB3xttse/yjjcuw0gWMHN1JWfm
eRuQUUBDDGUGkfF98k1aLrjPZooT3LIAV8L8md5C3ebEcXSC/h86hTYCGXv3oBDO
8sxcT0zoQcLuFhjkYLL1J1lBW6gxaVh052jYmQwMppQMos+WID2un2E92Ccg49E=
=BwLF
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This contains two fixes.
The first is to remove a duplication of creating debugfs files that
already exist and causes an error report to be printed due to the
failure of the second creation.
The second is a memory leak fix that was introduced in 3.14"
* tag 'trace-fixes-v3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/uprobes: Fix uprobe_cpu_buffer memory leak
tracing: Do not try to recreated toplevel set_ftrace_* files
With the restructing of the function tracer working with instances, the
"top level" buffer is a bit special, as the function tracing is mapped
to the same set of filters. This is done by using a "global_ops" descriptor
and having the "set_ftrace_filter" and "set_ftrace_notrace" map to it.
When an instance is created, it creates the same files but its for the
local instance and not the global_ops.
The issues is that the local instance creation shares some code with
the global instance one and we end up trying to create th top level
"set_ftrace_*" files twice, and on boot up, we get an error like this:
Could not create debugfs 'set_ftrace_filter' entry
Could not create debugfs 'set_ftrace_notrace' entry
The reason they failed to be created was because they were created
twice, and the second time gives this error as you can not create the
same file twice.
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull vfs updates from Al Viro:
"The first vfs pile, with deep apologies for being very late in this
window.
Assorted cleanups and fixes, plus a large preparatory part of iov_iter
work. There's a lot more of that, but it'll probably go into the next
merge window - it *does* shape up nicely, removes a lot of
boilerplate, gets rid of locking inconsistencie between aio_write and
splice_write and I hope to get Kent's direct-io rewrite merged into
the same queue, but some of the stuff after this point is having
(mostly trivial) conflicts with the things already merged into
mainline and with some I want more testing.
This one passes LTP and xfstests without regressions, in addition to
usual beating. BTW, readahead02 in ltp syscalls testsuite has started
giving failures since "mm/readahead.c: fix readahead failure for
memoryless NUMA nodes and limit readahead pages" - might be a false
positive, might be a real regression..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
missing bits of "splice: fix racy pipe->buffers uses"
cifs: fix the race in cifs_writev()
ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
kill generic_file_buffered_write()
ocfs2_file_aio_write(): switch to generic_perform_write()
ceph_aio_write(): switch to generic_perform_write()
xfs_file_buffered_aio_write(): switch to generic_perform_write()
export generic_perform_write(), start getting rid of generic_file_buffer_write()
generic_file_direct_write(): get rid of ppos argument
btrfs_file_aio_write(): get rid of ppos
kill the 5th argument of generic_file_buffered_write()
kill the 4th argument of __generic_file_aio_write()
lustre: don't open-code kernel_recvmsg()
ocfs2: don't open-code kernel_recvmsg()
drbd: don't open-code kernel_recvmsg()
constify blk_rq_map_user_iov() and friends
lustre: switch to kernel_sendmsg()
ocfs2: don't open-code kernel_sendmsg()
take iov_iter stuff to mm/iov_iter.c
process_vm_access: tidy up a bit
...
design of tracepoints and how a user could register a tracepoint
and have that tracepoint not be activated but no error was shown.
The design was for an out of tree module but broke in tree users.
The clean up was to remove the saving of the hash table of tracepoint
names such that they can be enabled before they exist (enabling
a module tracepoint before that module is loaded). This added more
complexity than needed. The clean up was to remove that code and
just enable tracepoints that exist or fail if they do not.
This removed a lot of code as well as the complexity that it brought.
As a side effect, instead of registering a tracepoint by its name,
the tracepoint needs to be registered with the tracepoint descriptor.
This removes having to duplicate the tracepoint names that are
enabled.
The second patch was added that simplified the way modules were
searched for.
This cleanup required changes that were in the 3.15 queue as well as
some changes that were added late in the 3.14-rc cycle. This final
change waited till the two were merged in upstream and then the
change was added and full tests were run. Unfortunately, the
test found some errors, but after it was already submitted to the
for-next branch and not to be rebased. Sparse errors were detected
by Fengguang Wu's bot tests, and my internal tests discovered that
the anonymous union initialization triggered a bug in older gcc compilers.
Luckily, there was a bugzilla for the gcc bug which gave a work around
to the problem. The third and fourth patch handled the sparse error
and the gcc bug respectively.
A final patch was tagged along to fix a missing documentation for
the README file.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTR+pwAAoJEKQekfcNnQGuvfoH/A4XZu4/1h2ZuKhzGi6lrrWr
+zHUQ+JmGiAYRziQFwr2t/gqJ2vmDfHJnbDjKi6Emx8JcxesHas6CQOWps4zEic0
dwYSQjvuGNGFIFt+7I0K1OxfVVdt2PQ2lVrB5WgYdbash5J4Bi+09QBv0RbUKheo
37dKSeN3pbsuQsR70OTVP8laG3dA9IbHW7PsKnxIEB5zeIUHUBME/QdPPj/CuJwk
wxZjXC2dbc3rdRlQjTVtWV3ZkGgZJB0k+JxjvZTA0N6u8Hj8LiFPuNawzf7ceBHx
gc++57+WuMW0f0X/ar5/+3UPGFQKMSvKmdxIQCnWXQz5seTYYKDEx7mTH22fxgg=
=OgeQ
-----END PGP SIGNATURE-----
Merge tag 'trace-3.15-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
"This includes the final patch to clean up and fix the issue with the
design of tracepoints and how a user could register a tracepoint and
have that tracepoint not be activated but no error was shown.
The design was for an out of tree module but broke in tree users. The
clean up was to remove the saving of the hash table of tracepoint
names such that they can be enabled before they exist (enabling a
module tracepoint before that module is loaded). This added more
complexity than needed. The clean up was to remove that code and just
enable tracepoints that exist or fail if they do not.
This removed a lot of code as well as the complexity that it brought.
As a side effect, instead of registering a tracepoint by its name, the
tracepoint needs to be registered with the tracepoint descriptor.
This removes having to duplicate the tracepoint names that are
enabled.
The second patch was added that simplified the way modules were
searched for.
This cleanup required changes that were in the 3.15 queue as well as
some changes that were added late in the 3.14-rc cycle. This final
change waited till the two were merged in upstream and then the change
was added and full tests were run. Unfortunately, the test found some
errors, but after it was already submitted to the for-next branch and
not to be rebased. Sparse errors were detected by Fengguang Wu's bot
tests, and my internal tests discovered that the anonymous union
initialization triggered a bug in older gcc compilers. Luckily, there
was a bugzilla for the gcc bug which gave a work around to the
problem. The third and fourth patch handled the sparse error and the
gcc bug respectively.
A final patch was tagged along to fix a missing documentation for the
README file"
* tag 'trace-3.15-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Add missing function triggers dump and cpudump to README
tracing: Fix anonymous unions in struct ftrace_event_call
tracepoint: Fix sparse warnings in tracepoint.c
tracepoint: Simplify tracepoint module search
tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints
that commit has fixed only the parts of that mess in fs/splice.c itself;
there had been more in several other ->splice_read() instances...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The debugfs tracing README file lists all the function triggers except for
dump and cpudump. These should be added too.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Register/unregister tracepoint probes with struct tracepoint pointer
rather than tracepoint name.
This change, which vastly simplifies tracepoint.c, has been proposed by
Steven Rostedt. It also removes 8.8kB (mostly of text) to the vmlinux
size.
From this point on, the tracers need to pass a struct tracepoint pointer
to probe register/unregister. A probe can now only be connected to a
tracepoint that exists. Moreover, tracers are responsible for
unregistering the probe before the module containing its associated
tracepoint is unloaded.
text data bss dec hex filename
10443444 4282528 10391552 25117524 17f4354 vmlinux.orig
10434930 4282848 10391552 25109330 17f2352 vmlinux
Link: http://lkml.kernel.org/r/1396992381-23785-2-git-send-email-mathieu.desnoyers@efficios.com
CC: Ingo Molnar <mingo@kernel.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Frank Ch. Eigler <fche@redhat.com>
CC: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
[ SDR - fixed return val in void func in tracepoint_module_going() ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Merge second patch-bomb from Andrew Morton:
- the rest of MM
- zram updates
- zswap updates
- exit
- procfs
- exec
- wait
- crash dump
- lib/idr
- rapidio
- adfs, affs, bfs, ufs
- cris
- Kconfig things
- initramfs
- small amount of IPC material
- percpu enhancements
- early ioremap support
- various other misc things
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (156 commits)
MAINTAINERS: update Intel C600 SAS driver maintainers
fs/ufs: remove unused ufs_super_block_third pointer
fs/ufs: remove unused ufs_super_block_second pointer
fs/ufs: remove unused ufs_super_block_first pointer
fs/ufs/super.c: add __init to init_inodecache()
doc/kernel-parameters.txt: add early_ioremap_debug
arm64: add early_ioremap support
arm64: initialize pgprot info earlier in boot
x86: use generic early_ioremap
mm: create generic early_ioremap() support
x86/mm: sparse warning fix for early_memremap
lglock: map to spinlock when !CONFIG_SMP
percpu: add preemption checks to __this_cpu ops
vmstat: use raw_cpu_ops to avoid false positives on preemption checks
slub: use raw_cpu_inc for incrementing statistics
net: replace __this_cpu_inc in route.c with raw_cpu_inc
modules: use raw_cpu_write for initialization of per cpu refcount.
mm: use raw_cpu ops for determining current NUMA node
percpu: add raw_cpu_ops
slub: fix leak of 'name' in sysfs_slab_add
...
To increase compiler portability there is <linux/compiler.h> which
provides convenience macros for various gcc constructs. Eg: __weak for
__attribute__((weak)). I've replaced all instances of gcc attributes
with the right macro in the kernel subsystem.
Signed-off-by: Gideon Israel Dsouza <gidisrael@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The purpose of this single series of commits from Srivatsa S Bhat (with
a small piece from Gautham R Shenoy) touching multiple subsystems that use
CPU hotplug notifiers is to provide a way to register them that will not
lead to deadlocks with CPU online/offline operations as described in the
changelog of commit 93ae4f978c (CPU hotplug: Provide lockless versions
of callback registration functions).
The first three commits in the series introduce the API and document it
and the rest simply goes through the users of CPU hotplug notifiers and
converts them to using the new method.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=SW7Q
-----END PGP SIGNATURE-----
Merge tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull CPU hotplug notifiers registration fixes from Rafael Wysocki:
"The purpose of this single series of commits from Srivatsa S Bhat
(with a small piece from Gautham R Shenoy) touching multiple
subsystems that use CPU hotplug notifiers is to provide a way to
register them that will not lead to deadlocks with CPU online/offline
operations as described in the changelog of commit 93ae4f978c ("CPU
hotplug: Provide lockless versions of callback registration
functions").
The first three commits in the series introduce the API and document
it and the rest simply goes through the users of CPU hotplug notifiers
and converts them to using the new method"
* tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
net/iucv/iucv.c: Fix CPU hotplug callback registration
net/core/flow.c: Fix CPU hotplug callback registration
mm, zswap: Fix CPU hotplug callback registration
mm, vmstat: Fix CPU hotplug callback registration
profile: Fix CPU hotplug callback registration
trace, ring-buffer: Fix CPU hotplug callback registration
xen, balloon: Fix CPU hotplug callback registration
hwmon, via-cputemp: Fix CPU hotplug callback registration
hwmon, coretemp: Fix CPU hotplug callback registration
thermal, x86-pkg-temp: Fix CPU hotplug callback registration
octeon, watchdog: Fix CPU hotplug callback registration
oprofile, nmi-timer: Fix CPU hotplug callback registration
intel-idle: Fix CPU hotplug callback registration
clocksource, dummy-timer: Fix CPU hotplug callback registration
drivers/base/topology.c: Fix CPU hotplug callback registration
acpi-cpufreq: Fix CPU hotplug callback registration
zsmalloc: Fix CPU hotplug callback registration
scsi, fcoe: Fix CPU hotplug callback registration
scsi, bnx2fc: Fix CPU hotplug callback registration
scsi, bnx2i: Fix CPU hotplug callback registration
...
Pull ARM changes from Russell King:
- Perf updates from Will Deacon:
- Support for Qualcomm Krait processors (run perf on your phone!)
- Support for Cortex-A12 (run perf stat on your FPGA!)
- Support for perf_sample_event_took, allowing us to automatically decrease
the sample rate if we can't handle the PMU interrupts quickly enough
(run perf record on your FPGA!).
- Basic uprobes support from David Long:
This patch series adds basic uprobes support to ARM. It is based on
patches developed earlier by Rabin Vincent. That approach of adding
hooks into the kprobes instruction parsing code was not well received.
This approach separates the ARM instruction parsing code in kprobes out
into a separate set of functions which can be used by both kprobes and
uprobes. Both kprobes and uprobes then provide their own semantic action
tables to process the results of the parsing.
- ARMv7M (microcontroller) updates from Uwe Kleine-König
- OMAP DMA updates (recently added Vinod's Ack even though they've been
sitting in linux-next for a few months) to reduce the reliance of
omap-dma on the code in arch/arm.
- SA11x0 changes from Dmitry Eremin-Solenikov and Alexander Shiyan
- Support for Cortex-A12 CPU
- Align support for ARMv6 with ARMv7 so they can cooperate better in a
single zImage.
- Addition of first AT_HWCAP2 feature bits for ARMv8 crypto support.
- Removal of IRQ_DISABLED from various ARM files
- Improved efficiency of virt_to_page() for single zImage
- Patch from Ulf Hansson to permit runtime PM callbacks to be available for
AMBA devices for suspend/resume as well.
- Finally kill asm/system.h on ARM.
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (89 commits)
dmaengine: omap-dma: more consolidation of CCR register setup
dmaengine: omap-dma: move IRQ handling to omap-dma
dmaengine: omap-dma: move register read/writes into omap-dma.c
ARM: omap: dma: get rid of 'p' allocation and clean up
ARM: omap: move dma channel allocation into plat-omap code
ARM: omap: dma: get rid of errata global
ARM: omap: clean up DMA register accesses
ARM: omap: remove almost-const variables
ARM: omap: remove references to disable_irq_lch
dmaengine: omap-dma: cleanup errata 3.3 handling
dmaengine: omap-dma: provide register read/write functions
dmaengine: omap-dma: use cached CCR value when enabling DMA
dmaengine: omap-dma: move barrier to omap_dma_start_desc()
dmaengine: omap-dma: move clnk_ctrl setting to preparation functions
dmaengine: omap-dma: improve efficiency loading C.SA/C.EI/C.FI registers
dmaengine: omap-dma: consolidate clearing channel status register
dmaengine: omap-dma: move CCR buffering disable errata out of the fast path
dmaengine: omap-dma: provide register definitions
dmaengine: omap-dma: consolidate setup of CCR
dmaengine: omap-dma: consolidate setup of CSDP
...
But there were a few features that were added.
Uprobes now work with event triggers and multi buffers.
Uprobes have support under ftrace and perf.
The big feature is that the function tracer can now be used within the
multi buffer instances. That is, you can now trace some functions
in one buffer, others in another buffer, all functions in a third buffer
and so on. They are basically agnostic from each other. This only
works for the function tracer and not for the function graph trace,
although you can have the function graph tracer running in the top level
buffer (or any tracer for that matter) and have different function tracing
going on in the sub buffers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTOthtAAoJEKQekfcNnQGu5c8H/Ana/U+0tmksp1dbHkRHsKSH
+Fsv4Jeu8gf1NaFKHEhkUTcFtnzE6qAPV2VCrcJwXbhAhhwZm+LjrnWdoy3215S3
cQW4LftLEonh2cM36Cos74TulMEYN6XmL6dQZV+CILKQkDrWU4qJjQ64okXEkqrd
9iG3p/mSXyvJcmnyg61ALnMOhZDLsXY3djBhWBPhiTPGS6BRb9zh4Pmw6Zv0n2rJ
U93Gt/3AQrv1ybu73dUxqP0abp60oXOiWoF/R2jcbKqIM+K9RPJX79unCV3jq3u9
f+6jMlB9PgAMqQj6ihJdwxKDDuzwyrVdEPnsgvl4jarCBCtVVwhKedBaKN/KS8k=
=HdXY
-----END PGP SIGNATURE-----
Merge tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Most of the changes were largely clean ups, and some documentation.
But there were a few features that were added:
Uprobes now work with event triggers and multi buffers and have
support under ftrace and perf.
The big feature is that the function tracer can now be used within the
multi buffer instances. That is, you can now trace some functions in
one buffer, others in another buffer, all functions in a third buffer
and so on. They are basically agnostic from each other. This only
works for the function tracer and not for the function graph trace,
although you can have the function graph tracer running in the top
level buffer (or any tracer for that matter) and have different
function tracing going on in the sub buffers"
* tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits)
tracing: Add BUG_ON when stack end location is over written
tracepoint: Remove unused API functions
Revert "tracing: Move event storage for array from macro to standalone function"
ftrace: Constify ftrace_text_reserved
tracepoints: API doc update to tracepoint_probe_register() return value
tracepoints: API doc update to data argument
ftrace: Fix compilation warning about control_ops_free
ftrace/x86: BUG when ftrace recovery fails
ftrace: Warn on error when modifying ftrace function
ftrace: Remove freelist from struct dyn_ftrace
ftrace: Do not pass data to ftrace_dyn_arch_init
ftrace: Pass retval through return in ftrace_dyn_arch_init()
ftrace: Inline the code from ftrace_dyn_table_alloc()
ftrace: Cleanup of global variables ftrace_new_pgs and ftrace_update_cnt
tracing: Evaluate len expression only once in __dynamic_array macro
tracing: Correctly expand len expressions from __dynamic_array macro
tracing/module: Replace include of tracepoint.h with jump_label.h in module.h
tracing: Fix event header migrate.h to include tracepoint.h
tracing: Fix event header writeback.h to include tracepoint.h
tracing: Warn if a tracepoint is not set via debugfs
...
Pull core block layer updates from Jens Axboe:
"This is the pull request for the core block IO bits for the 3.15
kernel. It's a smaller round this time, it contains:
- Various little blk-mq fixes and additions from Christoph and
myself.
- Cleanup of the IPI usage from the block layer, and associated
helper code. From Frederic Weisbecker and Jan Kara.
- Duplicate code cleanup in bio-integrity from Gu Zheng. This will
give you a merge conflict, but that should be easy to resolve.
- blk-mq notify spinlock fix for RT from Mike Galbraith.
- A blktrace partial accounting bug fix from Roman Pen.
- Missing REQ_SYNC detection fix for blk-mq from Shaohua Li"
* 'for-3.15/core' of git://git.kernel.dk/linux-block: (25 commits)
blk-mq: add REQ_SYNC early
rt,blk,mq: Make blk_mq_cpu_notify_lock a raw spinlock
blk-mq: support partial I/O completions
blk-mq: merge blk_mq_insert_request and blk_mq_run_request
blk-mq: remove blk_mq_alloc_rq
blk-mq: don't dump CPU -> hw queue map on driver load
blk-mq: fix wrong usage of hctx->state vs hctx->flags
blk-mq: allow blk_mq_init_commands() to return failure
block: remove old blk_iopoll_enabled variable
blktrace: fix accounting of partially completed requests
smp: Rename __smp_call_function_single() to smp_call_function_single_async()
smp: Remove wait argument from __smp_call_function_single()
watchdog: Simplify a little the IPI call
smp: Move __smp_call_function_single() below its safe version
smp: Consolidate the various smp_call_function_single() declensions
smp: Teach __smp_call_function_single() to check for offline cpus
smp: Remove unused list_head from csd
smp: Iterate functions through llist_for_each_entry_safe()
block: Stop abusing rq->csd.list in blk-softirq
block: Remove useless IPI struct initialization
...
Pull x86 LTO changes from Peter Anvin:
"More infrastructure work in preparation for link-time optimization
(LTO). Most of these changes is to make sure symbols accessed from
assembly code are properly marked as visible so the linker doesn't
remove them.
My understanding is that the changes to support LTO are still not
upstream in binutils, but are on the way there. This patchset should
conclude the x86-specific changes, and remaining patches to actually
enable LTO will be fed through the Kbuild tree (other than keeping up
with changes to the x86 code base, of course), although not
necessarily in this merge window"
* 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
Kbuild, lto: Handle basic LTO in modpost
Kbuild, lto: Disable LTO for asm-offsets.c
Kbuild, lto: Add a gcc-ld script to let run gcc as ld
Kbuild, lto: add ld-version and ld-ifversion macros
Kbuild, lto: Drop .number postfixes in modpost
Kbuild, lto, workaround: Don't warn for initcall_reference in modpost
lto: Disable LTO for sys_ni
lto: Handle LTO common symbols in module loader
lto, workaround: Add workaround for initcall reordering
lto: Make asmlinkage __visible
x86, lto: Disable LTO for the x86 VDSO
initconst, x86: Fix initconst mistake in ts5500 code
initconst: Fix initconst mistake in dcdbas
asmlinkage: Make trace_hardirqs_on/off_caller visible
asmlinkage, x86: Fix 32bit memcpy for LTO
asmlinkage Make __stack_chk_failed and memcmp visible
asmlinkage: Mark rwsem functions that can be called from assembler asmlinkage
asmlinkage: Make main_extable_sort_needed visible
asmlinkage, mutex: Mark __visible
asmlinkage: Make trace_hardirq visible
...
Pull scheduler changes from Ingo Molnar:
"Bigger changes:
- sched/idle restructuring: they are WIP preparation for deeper
integration between the scheduler and idle state selection, by
Nicolas Pitre.
- add NUMA scheduling pseudo-interleaving, by Rik van Riel.
- optimize cgroup context switches, by Peter Zijlstra.
- RT scheduling enhancements, by Thomas Gleixner.
The rest is smaller changes, non-urgnt fixes and cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits)
sched: Clean up the task_hot() function
sched: Remove double calculation in fix_small_imbalance()
sched: Fix broken setscheduler()
sparc64, sched: Remove unused sparc64_multi_core
sched: Remove unused mc_capable() and smt_capable()
sched/numa: Move task_numa_free() to __put_task_struct()
sched/fair: Fix endless loop in idle_balance()
sched/core: Fix endless loop in pick_next_task()
sched/fair: Push down check for high priority class task into idle_balance()
sched/rt: Fix picking RT and DL tasks from empty queue
trace: Replace hardcoding of 19 with MAX_NICE
sched: Guarantee task priority in pick_next_task()
sched/idle: Remove stale old file
sched: Put rq's sched_avg under CONFIG_FAIR_GROUP_SCHED
cpuidle/arm64: Remove redundant cpuidle_idle_call()
cpuidle/powernv: Remove redundant cpuidle_idle_call()
sched, nohz: Exclude isolated cores from load balancing
sched: Fix select_task_rq_fair() description comments
workqueue: Replace hardcoding of -20 and 19 with MIN_NICE and MAX_NICE
sys: Replace hardcoding of -20 and 19 with MIN_NICE and MAX_NICE
...
Pull perf changes from Ingo Molnar:
"Main changes:
Kernel side changes:
- Add SNB/IVB/HSW client uncore memory controller support (Stephane
Eranian)
- Fix various x86/P4 PMU driver bugs (Don Zickus)
Tooling, user visible changes:
- Add several futex 'perf bench' microbenchmarks (Davidlohr Bueso)
- Speed up thread map generation (Don Zickus)
- Introduce 'perf kvm --list-cmds' command line option for use by
scripts (Ramkumar Ramachandra)
- Print the evsel name in the annotate stdio output, prep to fix
support outputting annotation for multiple events, not just for the
first one (Arnaldo Carvalho de Melo)
- Allow setting preferred callchain method in .perfconfig (Jiri Olsa)
- Show in what binaries/modules 'perf probe's are set (Masami
Hiramatsu)
- Support distro-style debuginfo for uprobe in 'perf probe' (Masami
Hiramatsu)
Tooling, internal changes and fixes:
- Use tid in mmap/mmap2 events to find maps (Don Zickus)
- Record the reason for filtering an address_location (Namhyung Kim)
- Apply all filters to an addr_location (Namhyung Kim)
- Merge al->filtered with hist_entry->filtered in report/hists
(Namhyung Kim)
- Fix memory leak when synthesizing thread records (Namhyung Kim)
- Use ui__has_annotation() in 'report' (Namhyung Kim)
- hists browser refactorings to reuse code accross UIs (Namhyung Kim)
- Add support for the new DWARF unwinder library in elfutils (Jiri
Olsa)
- Fix build race in the generation of bison files (Jiri Olsa)
- Further streamline the feature detection display, trimming it a bit
to show just the libraries detected, using VF=1 gets a more verbose
output, showing the less interesting feature checks as well (Jiri
Olsa).
- Check compatible symtab type before loading dso (Namhyung Kim)
- Check return value of filename__read_debuglink() (Stephane Eranian)
- Move some hashing and fs related code from tools/perf/util/ to
tools/lib/ so that it can be used by more tools/ living utilities
(Borislav Petkov)
- Prepare DWARF unwinding code for using an elfutils alternative
unwinding library (Jiri Olsa)
- Fix DWARF unwind max_stack processing (Jiri Olsa)
- Add dwarf unwind 'perf test' entry (Jiri Olsa)
- 'perf probe' improvements including memory leak fixes, sharing the
intlist class with other tools, uprobes/kprobes code sharing and
use of ref_reloc_sym (Masami Hiramatsu)
- Shorten sample symbol resolving by adding cpumode to struct
addr_location (Arnaldo Carvalho de Melo)
- Fix synthesizing mmaps for threads (Don Zickus)
- Fix invalid output on event group stdio report (Namhyung Kim)
- Fixup header alignment in 'perf sched latency' output (Ramkumar
Ramachandra)
- Fix off-by-one error in 'perf timechart record' argv handling
(Ramkumar Ramachandra)
Tooling, cleanups:
- Remove unused thread__find_map function (Jiri Olsa)
- Remove unused simple_strtoul() function (Ramkumar Ramachandra)
Tooling, documentation updates:
- Update function names in debug messages (Ramkumar Ramachandra)
- Update some code references in design.txt (Ramkumar Ramachandra)
- Clarify load-latency information in the 'perf mem' docs (Andi
Kleen)
- Clarify x86 register naming in 'perf probe' docs (Andi Kleen)"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (96 commits)
perf tools: Remove unused simple_strtoul() function
perf tools: Update some code references in design.txt
perf evsel: Update function names in debug messages
perf tools: Remove thread__find_map function
perf annotate: Print the evsel name in the stdio output
perf report: Use ui__has_annotation()
perf tools: Fix memory leak when synthesizing thread records
perf tools: Use tid in mmap/mmap2 events to find maps
perf report: Merge al->filtered with hist_entry->filtered
perf symbols: Apply all filters to an addr_location
perf symbols: Record the reason for filtering an address_location
perf sched: Fixup header alignment in 'latency' output
perf timechart: Fix off-by-one error in 'record' argv handling
perf machine: Factor machine__find_thread to take tid argument
perf tools: Speed up thread map generation
perf kvm: introduce --list-cmds for use by scripts
perf ui hists: Pass evsel to hpp->header/width functions explicitly
perf symbols: Introduce thread__find_cpumode_addr_location
perf session: Change header.misc dump from decimal to hex
perf ui/tui: Reuse generic __hpp__fmt() code
...
While working on my tutorial for 2014 Linux Collaboration Summit
I found that the traceon trigger did not work when conditions were
used. The other triggers worked fine though. Looking into it, it
is because of the way the triggers use the ring buffer to store
the fields it will use for the condition. But if tracing is off, nothing
is stored in the buffer, and the tracepoint exits before calling the
trigger to test the condition. This is fine for all the triggers that
only work when tracing is on, but for traceon trigger that is to
work when tracing is off, nothing happens.
The fix is simple, just use a temp ring buffer to record the event
if tracing is off and the event has a trace event conditional trigger
enabled. The rest of the tracepoint code will work just fine, but
the tracepoint wont be recorded in the other buffers.
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It is difficult to detect a stack overrun when it
actually occurs.
We have observed that this type of corruption is often
silent and can go unnoticed. Once the corrupted region
is examined, the outcome is undefined and often
results in sporadic system crashes.
When the stack tracing feature is enabled, let's check
for this condition and take appropriate action.
Note: init_task doesn't get its stack end location
set to STACK_END_MAGIC.
Link: http://lkml.kernel.org/r/1395669837-30209-1-git-send-email-atomlin@redhat.com
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I originally wrote commit 35bb4399bd to shrink the size of the overhead of
tracepoints by several kilobytes. Later, I received a patch from Vaibhav
Nagarnaik that fixed a bug in the same code that this commit touches. Not
only did it fix a bug, it also removed code and shrunk the size of the
overhead of trace events even more than this commit did.
Since this commit is scheduled for 3.15 and Vaibhav's patch is already in
mainline, I need to revert this patch in order to keep it from conflicting
with Vaibhav's patch. Not to mention, Vaibhav's patch makes this patch
obsolete.
Link: http://lkml.kernel.org/r/20140320225637.0226041b@gandalf.local.home
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In event format strings, the array size is reported in two locations.
One in array subscript and then via the "size:" attribute. The values
reported there have a mismatch.
For e.g., in sched:sched_switch the prev_comm and next_comm character
arrays have subscript values as [32] where as the actual field size is
16.
name: sched_switch
ID: 301
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1;signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[32]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[32]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
After bisection, the following commit was blamed:
92edca0 tracing: Use direct field, type and system names
This commit removes the duplication of strings for field->name and
field->type assuming that all the strings passed in
__trace_define_field() are immutable. This is not true for arrays, where
the type string is created in event_storage variable and field->type for
all array fields points to event_storage.
Use __stringify() to create a string constant for the type string.
Also, get rid of event_storage and event_storage_mutex that are not
needed anymore.
also, an added benefit is that this reduces the overhead of events a bit more:
text data bss dec hex filename
8424787 2036472 1302528 11763787 b3804b vmlinux
8420814 2036408 1302528 11759750 b37086 vmlinux.patched
Link: http://lkml.kernel.org/r/1392349908-29685-1-git-send-email-vnagarnaik@google.com
Cc: Laurent Chavey <chavey@google.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Subsystems that want to register CPU hotplug callbacks, as well as perform
initialization for the CPUs that are already online, often do it as shown
below:
get_online_cpus();
for_each_online_cpu(cpu)
init_cpu(cpu);
register_cpu_notifier(&foobar_cpu_notifier);
put_online_cpus();
This is wrong, since it is prone to ABBA deadlocks involving the
cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently
with CPU hotplug operations).
Instead, the correct and race-free way of performing the callback
registration is:
cpu_notifier_register_begin();
for_each_online_cpu(cpu)
init_cpu(cpu);
/* Note the use of the double underscored version of the API */
__register_cpu_notifier(&foobar_cpu_notifier);
cpu_notifier_register_done();
Fix the tracing ring-buffer code by using this latter form of callback
registration.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Suggested change from Oleg Nesterov. Fixes incomplete dependencies
for uprobes feature.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
With CONFIG_DYNAMIC_FTRACE=n, I see a warning:
kernel/trace/ftrace.c:240:13: warning: 'control_ops_free' defined but not used
static void control_ops_free(struct ftrace_ops *ops)
^
Move that function around to an already existing #ifdef
CONFIG_DYNAMIC_FTRACE block as the function is used solely from the
dynamic function tracing functions.
Link: http://lkml.kernel.org/r/1394484131-5107-1-git-send-email-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Recent issues with user space callchains processing within
page fault handler tracing showed as Peter said 'there's
just too much fail surface'.
The user space stack dump is just another source of the this issue.
Related list discussions:
http://marc.info/?t=139302086500001&r=1&w=2http://marc.info/?t=139301437300003&r=1&w=2
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1393775800-13524-3-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Recent issues with user space callchains processing within
page fault handler tracing showed as Peter said 'there's
just too much fail surface'.
Related list discussions:
http://marc.info/?t=139302086500001&r=1&w=2http://marc.info/?t=139301437300003&r=1&w=2
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1393775800-13524-2-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We should print some warning and kill ftrace functionality when the ftrace
function is not set correctly. Otherwise, ftrace might do crazy things without
an explanation. The error value has been ignored so far.
Note that an error that happens during updating all the traced calls is handled
in ftrace_replace_code(). We print more details about the particular
failing address via ftrace_bug() there.
Link: http://lkml.kernel.org/r/1393258342-29978-3-git-send-email-pmladek@suse.cz
Signed-off-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As the data parameter is not really used by any ftrace_dyn_arch_init,
remove that from ftrace_dyn_arch_init. This also removes the addr
local variable from ftrace_init which is now unused.
Note the documentation was imprecise as it did not suggest to set
(*data) to 0.
Link: http://lkml.kernel.org/r/1393268401-24379-4-git-send-email-jslaby@suse.cz
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
No architecture uses the "data" parameter in ftrace_dyn_arch_init() in any
way, it just sets the value to 0. And this is used as a return value
in the caller -- ftrace_init, which just checks the retval against
zero.
Note there is also "return 0" in every ftrace_dyn_arch_init. So it is
enough to check the retval and remove all the indirect sets of data on
all archs.
Link: http://lkml.kernel.org/r/1393268401-24379-3-git-send-email-jslaby@suse.cz
Cc: linux-arch@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function used to do allocations some time ago. This no longer
happens and it only checks the count and prints some info. This patch
inlines the body to the only caller. There are two reasons:
* the name of the function was misleading
* it's clear what is going on in ftrace_init now
Link: http://lkml.kernel.org/r/1393268401-24379-2-git-send-email-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some of them can be local to functions, so make them local and pass
them as parameters where needed:
* __start_mcount_loc+__stop_mcount_loc are local to ftrace_init
* ftrace_new_pgs -> new_pgs/start_pg
* ftrace_update_cnt -> local update_cnt in ftrace_update_code
Link: http://lkml.kernel.org/r/1393268401-24379-1-git-send-email-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The functions that assign the contents for the ftrace events are
defined by the TRACE_EVENT() macros. Each event has its own unique
way to assign data to its buffer. When you have over 500 events,
that means there's 500 functions assigning data uniquely for each
event (not really that many, as DECLARE_EVENT_CLASS() and multiple
DEFINE_EVENT()s will only need a single function).
By making helper functions in the core kernel to do some of the work
instead, we can shrink the size of the kernel down a bit.
With a kernel configured with 502 events, the change in size was:
text data bss dec hex filename
12987390 1913504 9785344 24686238 178ae9e /tmp/vmlinux
12959102 1913504 9785344 24657950 178401e /tmp/vmlinux.patched
That's a total of 28288 bytes, which comes down to 56 bytes per event.
Link: http://lkml.kernel.org/r/20120810034708.370808175@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The code that shows array fields for events is defined for all events.
This can add up quite a bit when you have over 500 events.
By making helper functions in the core kernel to do the work
instead, we can shrink the size of the kernel down a bit.
With a kernel configured with 502 events, the change in size was:
text data bss dec hex filename
12990946 1913568 9785344 24689858 178bcc2 /tmp/vmlinux
12987390 1913504 9785344 24686238 178ae9e /tmp/vmlinux.patched
That's a total of 3556 bytes, which comes down to 7 bytes per event.
Although it's not much, this code is just called at initialization of
the events.
Link: http://lkml.kernel.org/r/20120810034708.084036335@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The code for trace events to format the raw recorded event data
into human readable format in the 'trace' file is repeated for every
event in the system. When you have over 500 events, this can add up
quite a bit.
By making helper functions in the core kernel to do the work
instead, we can shrink the size of the kernel down a bit.
With a kernel configured with 502 events, the change in size was:
text data bss dec hex filename
12991007 1913568 9785344 24689919 178bcff /tmp/vmlinux.orig
12990946 1913568 9785344 24689858 178bcc2 /tmp/vmlinux.patched
Note, this version does not save as much as the version of this patch
I had a few years ago. That is because in the mean time, commit
f71130de5c ("tracing: Add a helper function for event print functions")
did a lot of the work my original patch did. But this change helps
slightly, and is part of a larger clean up to reduce the size much further.
Link: http://lkml.kernel.org/r/20120810034707.378538034@goodmis.org
Cc: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_block_rq_complete does not take into account that request can
be partially completed, so we can get the following incorrect output
of blkparser:
C R 232 + 240 [0]
C R 240 + 232 [0]
C R 248 + 224 [0]
C R 256 + 216 [0]
but should be:
C R 232 + 8 [0]
C R 240 + 8 [0]
C R 248 + 8 [0]
C R 256 + 8 [0]
Also, the whole output summary statistics of completed requests and
final throughput will be incorrect.
This patch takes into account real completion size of the request and
fixes wrong completion accounting.
Signed-off-by: Roman Pen <r.peniaev@gmail.com>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@redhat.com>
CC: linux-kernel@vger.kernel.org
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
If a module fails to add its tracepoints due to module tainting, do not
create the module event infrastructure in the debugfs directory. As the events
will not work and worse yet, they will silently fail, making the user wonder
why the events they enable do not display anything.
Having a warning on module load and the events not visible to the users
will make the cause of the problem much clearer.
Link: http://lkml.kernel.org/r/20140227154923.265882695@goodmis.org
Fixes: 6d723736e4 "tracing/events: add support for modules to TRACE_EVENT"
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org # 2.6.31+
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use MAX_NICE instead of the value 19 for ring_buffer_benchmark.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1393251121-25534-1-git-send-email-yangds.fnst@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The ENABLED flag needs to be cleared when a ftrace_ops is unregistered
otherwise it wont be able to be registered again.
This is only for static tracing and does not affect DYNAMIC_FTRACE at
all.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Being able to change the trace clock at boot can be advantageous if
you need a better source of when things happen across CPUs. The default
trace clock is the fastest, but it uses local clocks which may not be
synced across CPUs and it does not let you know when events took place
with respect to events on other CPUs.
The global trace clock can help in this case, and if you do not care
about timings, the counter "clock" is the best, as that is just a simple
atomic counter that is incremented for every event.
Usage is to add "trace_clock=counter" on the kernel command line. You
can replace counter with "global" or any of the clocks listed in
/sys/kernel/debug/tracing/trace_clock
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Appreciated-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It seems there's no reason to prevent mixed used of ftrace and perf
for a single uprobe event. At least the kprobes already support it.
Link: http://lkml.kernel.org/r/1389946120-19610-6-git-send-email-namhyung@kernel.org
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add support for event triggering to uprobes. This is same as kprobes
support added by Tom (plus cleanup by Steven).
Link: http://lkml.kernel.org/r/1389946120-19610-5-git-send-email-namhyung@kernel.org
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Support multi-buffer on uprobe-based dynamic events by
using ftrace_event_file.
This patch is based kprobe-based dynamic events multibuffer
support work initially, commited by Masami(commit 41a7dd420c),
but revised as below:
Oleg changed the kprobe-based multibuffer design from
array-pointers of ftrace_event_file into simple list,
so this patch also change to the list design.
rcu_read_lock/unlock added into uprobe_trace_func/uretprobe_trace_func,
to synchronize with ftrace_event_file list add and delete.
Even though we allow multi-uprobes instances now,
but TP_FLAG_PROFILE/TP_FLAG_TRACE are still mutually exclusive
in probe_event_enable currently, this means we cannot allow
one user is using uprobe-tracer, and another user is using
perf-probe on same uprobe concurrently.
(Perhaps this will be fix in future, kprobe don't have this
limitation now)
Link: http://lkml.kernel.org/r/1389946120-19610-4-git-send-email-namhyung@kernel.org
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A single uprobe event might serve different users like ftrace and
perf. And this is especially important for upcoming multi buffer
support. But in this case it'll fetch (same) data from userspace
multiple times. So move it to the beginning of the dispatcher
function and reuse it for each users.
Link: http://lkml.kernel.org/r/1389946120-19610-3-git-send-email-namhyung@kernel.org
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The uprobe_{trace,perf}_print functions are misnomers since what they
do is not printing. There's also a real print function named
print_uprobe_event() so they'll only increase confusion IMHO.
Rename them with double underscores to follow convention of kprobe.
Link: http://lkml.kernel.org/r/1389946120-19610-2-git-send-email-namhyung@kernel.org
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Create a "set_ftrace_filter" and "set_ftrace_notrace" files in the instance
directories to let users filter of functions to trace for the given instance.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In preparation for having the function tracing instances be able to
filter on functions, the generic filter functions must first be
converted to take in the global_ops as a parameter.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Allow instances (sub-buffers) to enable function tracing.
Each instance will have its own function tracing capability.
For now, instances will not have function stack tracing, or will
they be able to pick and choose what functions they can trace.
Picking and choosing their own functions will come later.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As tracers will soon be used by instances, the tracer enabled field
needs to be converted to a counter instead of a boolean.
This counter is protected by the trace_types_lock mutex.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When an instance is about to be deleted, make sure the tracer
is set to nop. If it isn't reset the tracer and set it to the nop
tracer, otherwise memory leaks and bad pointers may result.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If global_ops function is being called directly, instead of the global_ops
list function, set the global_ops private to be the same as the ops private
that's being called directly.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the tracers (function, function_graph, irqsoff, etc) can only
be used by the top level tracing directory (not for instances).
This sets up the infrastructure to allow instances to be able to
run a separate tracer apart from the what the top level tracing is
doing.
As tracers need to adapt for being used by instances, the tracers
must flag if they can be used by instances or not. Currently only the
'nop' tracer can be used by all instances.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As options (flags) may affect instances instead of being global
the flag_changed() callbacks need to receive the trace_array descriptor
of the instance they will be modifying.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As options (flags) may affect instances instead of being global
the set_flag() callbacks need to receive the trace_array descriptor
of the instance they will be modifying.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Each sub-buffer (buffer page) has a full 64 bit timestamp. The events on
that page use a 27 bit delta against that timestamp in order to save on
bits written to the ring buffer. If the time between events is larger than
what the 27 bits can hold, a "time extend" event is added to hold the
entire 64 bit timestamp again and the events after that hold a delta from
that timestamp.
As a "time extend" is always paired with an event, it is logical to just
allocate the event with the time extend, to make things a bit more efficient.
Unfortunately, when the pairing code was written, it removed the "delta = 0"
from the first commit on a page, causing the events on the page to be
slightly skewed.
Fixes: 69d1b839f7 "ring-buffer: Bind time extend and data events together"
Cc: stable@vger.kernel.org # 2.6.37+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull core block IO changes from Jens Axboe:
"The major piece in here is the immutable bio_ve series from Kent, the
rest is fairly minor. It was supposed to go in last round, but
various issues pushed it to this release instead. The pull request
contains:
- Various smaller blk-mq fixes from different folks. Nothing major
here, just minor fixes and cleanups.
- Fix for a memory leak in the error path in the block ioctl code
from Christian Engelmayer.
- Header export fix from CaiZhiyong.
- Finally the immutable biovec changes from Kent Overstreet. This
enables some nice future work on making arbitrarily sized bios
possible, and splitting more efficient. Related fixes to immutable
bio_vecs:
- dm-cache immutable fixup from Mike Snitzer.
- btrfs immutable fixup from Muthu Kumar.
- bio-integrity fix from Nic Bellinger, which is also going to stable"
* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
xtensa: fixup simdisk driver to work with immutable bio_vecs
block/blk-mq-cpu.c: use hotcpu_notifier()
blk-mq: for_each_* macro correctness
block: Fix memory leak in rw_copy_check_uvector() handling
bio-integrity: Fix bio_integrity_verify segment start bug
block: remove unrelated header files and export symbol
blk-mq: uses page->list incorrectly
blk-mq: use __smp_call_function_single directly
btrfs: fix missing increment of bi_remaining
Revert "block: Warn and free bio if bi_end_io is not set"
block: Warn and free bio if bi_end_io is not set
blk-mq: fix initializing request's start time
block: blk-mq: don't export blk_mq_free_queue()
block: blk-mq: make blk_sync_queue support mq
block: blk-mq: support draining mq queue
dm cache: increment bi_remaining when bi_end_io is restored
block: fixup for generic bio chaining
block: Really silence spurious compiler warnings
block: Silence spurious compiler warnings
block: Kill bio_pair_split()
...
the new features added to 3.14.
The third patch is a minor bugfix to the trace_puts() functions that
will crash the system if a developer adds one before the tracing system
is setup. It also affects trace_printk() if it has no arguments, as
the code will convert it to a trace_puts() as well. Note, this bug
will not affect unmodified kernels, as trace_printk() and trace_puts()
should only be used by developers for testing.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJS5oAkAAoJEKQekfcNnQGuOfkH/1ScwoRslERCCjhPEZu958bG
VugNvliB/uDwq3qkmBcncMHwqkFBgJay9ieah+JFeK6x3G6mO/uf+UhN5cmLzVBh
vA5dKR2zW6WTxKYSvXYapD7OzC7R+V6CLvpMl5WMZ1t3ESQhR6gUrpPdigecBWs9
015rMVA2xXjNnHNDM1nem1PhnMba78A/N98lFErYGpvVBjkCpB8mSt8adds9bYp8
a83P6tGUfXvsYO3sOqqBnOOqcfzCjjJbmr94v/F+SmLyuxuV0tVzBkIwXkKTNhEK
bQZj9Pfe+1oIkldXxstn5jWaOvI6RlAGW4b4qXt30AgrGRSyEo5xpvfLfyNUif4=
=N3kq
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"The first two patches fix the debugfs README file to reflect better
the new features added to 3.14.
The third patch is a minor bugfix to the trace_puts() functions that
will crash the system if a developer adds one before the tracing
system is setup. It also affects trace_printk() if it has no
arguments, as the code will convert it to a trace_puts() as well.
Note, this bug will not affect unmodified kernels, as trace_printk()
and trace_puts() should only be used by developers for testing"
* tag 'trace-fixes-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Check if tracing is enabled in trace_puts()
tracing: Fix formatting of trace README file
tracing/README: Add event file usage to tracing mini-HOWTO
If trace_puts() is used very early in boot up, it can crash the machine
if it is called before the ring buffer is allocated. If a trace_printk()
is used with no arguments, then it will be converted into a trace_puts()
and suffer the same fate.
Cc: stable@vger.kernel.org # 3.10+
Fixes: 09ae72348e "tracing: Add trace_puts() for even faster trace_printk() tracing"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix the formatting of the README file in the trace debugfs to fit in
an 80 character window.
Also add a comment about the event trigger counter with regards to
traceon and traceoff.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It would be useful to have a cheat-sheet for everything under
tracing/events/ alongside the existing text describing the other files
in the tracing/ dir.
Add short descriptions of the directories and files under events/
along with examples, similar to the existing text for the other files
in tracing/.
Also clean up a few minor alignment problems noticed when adding the
new text.
Link: http://lkml.kernel.org/r/1389993104.3040.445.camel@empanada
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
triggers by Tom Zanussi. A trigger is a way to enable an action when an
event is hit. The actions are:
o trace on/off - enable or disable tracing
o snapshot - save the current trace buffer in the snapshot
o stacktrace - dump the current stack trace to the ringbuffer
o enable/disable events - enable or disable another event
Namhyung Kim added updates to the tracing uprobes code. Having the
uprobes add support for fetch methods.
The rest are various bug fixes with the new code, and minor ones for
the old code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJS3Z9fAAoJEKQekfcNnQGuFf0H/0CteaN+BJjpif6Tnxia15Sp
pcftzU0lgqfNzsfitmbjiVTgXWqCghoZo8UI9tQZvBZ9wmDIxeXQR73uoBgVlSCQ
ovyBO/R8r+lq+7EsDCwntZvrLbcdn6s/jzoruRvt7r35ghK5pH81DNR1BOzTQBhW
x+361Xtc13aok7N7JN8KR96VDUP9f8KU6PWqJ5lgS2Zl+wbVw6b0p8OV8IMCHczP
MdYrx8y4Jv4QWW7rMShAAVBe9qJQ56JWiWA17ysa4kY8BkKQ7QtlEFr+r1YY0nX5
67brXiL8u0NFzRx5y2VRpGc25BbImnVBFpoLQ5Itluq9OdZE3aOQubzXlY70R6g=
=Hkho
-----END PGP SIGNATURE-----
Merge tag 'trace-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This pull request has a new feature to ftrace, namely the trace event
triggers by Tom Zanussi. A trigger is a way to enable an action when
an event is hit. The actions are:
o trace on/off - enable or disable tracing
o snapshot - save the current trace buffer in the snapshot
o stacktrace - dump the current stack trace to the ringbuffer
o enable/disable events - enable or disable another event
Namhyung Kim added updates to the tracing uprobes code. Having the
uprobes add support for fetch methods.
The rest are various bug fixes with the new code, and minor ones for
the old code"
* tag 'trace-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (38 commits)
tracing: Fix buggered tee(2) on tracing_pipe
tracing: Have trace buffer point back to trace_array
ftrace: Fix synchronization location disabling and freeing ftrace_ops
ftrace: Have function graph only trace based on global_ops filters
ftrace: Synchronize setting function_trace_op with ftrace_trace_function
tracing: Show available event triggers when no trigger is set
tracing: Consolidate event trigger code
tracing: Fix counter for traceon/off event triggers
tracing: Remove double-underscore naming in syscall trigger invocations
tracing/kprobes: Add trace event trigger invocations
tracing/probes: Fix build break on !CONFIG_KPROBE_EVENT
tracing/uprobes: Add @+file_offset fetch method
uprobes: Allocate ->utask before handler_chain() for tracing handlers
tracing/uprobes: Add support for full argument access methods
tracing/uprobes: Fetch args before reserving a ring buffer
tracing/uprobes: Pass 'is_return' to traceprobe_parse_probe_arg()
tracing/probes: Implement 'memory' fetch method for uprobes
tracing/probes: Add fetch{,_size} member into deref fetch method
tracing/probes: Move 'symbol' fetch method to kprobes
tracing/probes: Implement 'stack' fetch method for uprobes
...
In kernel/trace/trace.c we have this:
static void tracing_pipe_buf_release(struct pipe_inode_info *pipe,
struct pipe_buffer *buf)
{
__free_page(buf->page);
}
static const struct pipe_buf_operations tracing_pipe_buf_ops = {
.can_merge = 0,
.map = generic_pipe_buf_map,
.unmap = generic_pipe_buf_unmap,
.confirm = generic_pipe_buf_confirm,
.release = tracing_pipe_buf_release,
.steal = generic_pipe_buf_steal,
.get = generic_pipe_buf_get,
};
with
void generic_pipe_buf_get(struct pipe_inode_info *pipe, struct pipe_buffer *buf)
{
page_cache_get(buf->page);
}
and I don't see anything that would've prevented tee(2) called on the pipe
that got stuff spliced into it from that sucker. ->ops->get() will be
called, then buf gets copied into target pipe's ->bufs[] and eventually
readers get to both copies of the buffer. With
get_page(page)
look at that page
__free_page(page)
look at that page
__free_page(page)
which is not a good thing, to put it mildly. AFAICS, that ought to use
the normal generic_pipe_buf_release() (aka page_cache_release(buf->page)),
shouldn't it?
[
SDR - As trace_pipe just allocates the page with alloc_page(GFP_KERNEL),
and doesn't do anything special with it (no LRU logic). The __free_page()
should be fine, as it wont actually free a page with reference count.
Maybe there's a chance to leak memory? Anyway, This change is at a minimum
good for being symmetric with generic_pipe_buf_get, it is fine to add.
]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[ SDR - Removed no longer used tracing_pipe_buf_release ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace buffer has a descriptor pointer that goes back to the trace
array. But it was never assigned. Luckily, nothing uses it (yet), but
it will in the future.
Although nothing currently uses this, if any of the new features get
backported to older kernels, and because this is such a simple change,
I'm marking it for stable too.
Cc: stable@vger.kernel.org # v3.10+
Fixes: 12883efb67 "tracing: Consolidate max_tr into main trace_array structure"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The synchronization needed after ftrace_ops are unregistered must happen
after the callback is disabled from becing called by functions.
The current location happens after the function is being removed from the
internal lists, but not after the function callbacks were disabled, leaving
the functions susceptible of being called after their callbacks are freed.
This affects perf and any externel users of function tracing (LTTng and
SystemTap).
Cc: stable@vger.kernel.org # 3.0+
Fixes: cdbe61bfe7 "ftrace: Allow dynamically allocated function tracers"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Doing some different tests, I discovered that function graph tracing, when
filtered via the set_ftrace_filter and set_ftrace_notrace files, does
not always keep with them if another function ftrace_ops is registered
to trace functions.
The reason is that function graph just happens to trace all functions
that the function tracer enables. When there was only one user of
function tracing, the function graph tracer did not need to worry about
being called by functions that it did not want to trace. But now that there
are other users, this becomes a problem.
For example, one just needs to do the following:
# cd /sys/kernel/debug/tracing
# echo schedule > set_ftrace_filter
# echo function_graph > current_tracer
# cat trace
[..]
0) | schedule() {
------------------------------------------
0) <idle>-0 => rcu_pre-7
------------------------------------------
0) ! 2980.314 us | }
0) | schedule() {
------------------------------------------
0) rcu_pre-7 => <idle>-0
------------------------------------------
0) + 20.701 us | }
# echo 1 > /proc/sys/kernel/stack_tracer_enabled
# cat trace
[..]
1) + 20.825 us | }
1) + 21.651 us | }
1) + 30.924 us | } /* SyS_ioctl */
1) | do_page_fault() {
1) | __do_page_fault() {
1) 0.274 us | down_read_trylock();
1) 0.098 us | find_vma();
1) | handle_mm_fault() {
1) | _raw_spin_lock() {
1) 0.102 us | preempt_count_add();
1) 0.097 us | do_raw_spin_lock();
1) 2.173 us | }
1) | do_wp_page() {
1) 0.079 us | vm_normal_page();
1) 0.086 us | reuse_swap_page();
1) 0.076 us | page_move_anon_rmap();
1) | unlock_page() {
1) 0.082 us | page_waitqueue();
1) 0.086 us | __wake_up_bit();
1) 1.801 us | }
1) 0.075 us | ptep_set_access_flags();
1) | _raw_spin_unlock() {
1) 0.098 us | do_raw_spin_unlock();
1) 0.105 us | preempt_count_sub();
1) 1.884 us | }
1) 9.149 us | }
1) + 13.083 us | }
1) 0.146 us | up_read();
When the stack tracer was enabled, it enabled all functions to be traced, which
now the function graph tracer also traces. This is a side effect that should
not occur.
To fix this a test is added when the function tracing is changed, as well as when
the graph tracer is enabled, to see if anything other than the ftrace global_ops
function tracer is enabled. If so, then the graph tracer calls a test trampoline
that will look at the function that is being traced and compare it with the
filters defined by the global_ops.
As an optimization, if there's no other function tracers registered, or if
the only registered function tracers also use the global ops, the function
graph infrastructure will call the registered function graph callback directly
and not go through the test trampoline.
Cc: stable@vger.kernel.org # 3.3+
Fixes: d2d45c7a03 "tracing: Have stack_tracer use a separate list of functions"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some method to deal with rt-mutexes and make sched_dl interact with
the current PI-coded is needed, raising all but trivial issues, that
needs (according to us) to be solved with some restructuring of
the pi-code (i.e., going toward a proxy execution-ish implementation).
This is under development, in the meanwhile, as a temporary solution,
what this commits does is:
- ensure a pi-lock owner with waiters is never throttled down. Instead,
when it runs out of runtime, it immediately gets replenished and it's
deadline is postponed;
- the scheduling parameters (relative deadline and default runtime)
used for that replenishments --during the whole period it holds the
pi-lock-- are the ones of the waiting task with earliest deadline.
Acting this way, we provide some kind of boosting to the lock-owner,
still by using the existing (actually, slightly modified by the previous
commit) pi-architecture.
We would stress the fact that this is only a surely needed, all but
clean solution to the problem. In the end it's only a way to re-start
discussion within the community. So, as always, comments, ideas, rants,
etc.. are welcome! :-)
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
[ Added !RT_MUTEXES build fix. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-11-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It is very likely that systems that wants/needs to use the new
SCHED_DEADLINE policy also want to have the scheduling latency of
the -deadline tasks under control.
For this reason a new version of the scheduling wakeup latency,
called "wakeup_dl", is introduced.
As a consequence of applying this patch there will be three wakeup
latency tracer:
* "wakeup", that deals with all tasks in the system;
* "wakeup_rt", that deals with -rt and -deadline tasks only;
* "wakeup_dl", that deals with -deadline tasks only.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-9-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
ftrace_trace_function is a variable that holds what function will be called
directly by the assembly code (mcount). If just a single function is
registered and it handles recursion itself, then the assembly will call that
function directly without any helper function. It also passes in the
ftrace_op that was registered with the callback. The ftrace_op to send is
stored in the function_trace_op variable.
The ftrace_trace_function and function_trace_op needs to be coordinated such
that the called callback wont be called with the wrong ftrace_op, otherwise
bad things can happen if it expected a different op. Luckily, there's no
callback that doesn't use the helper functions that requires this. But
there soon will be and this needs to be fixed.
Use a set_function_trace_op to store the ftrace_op to set the
function_trace_op to when it is safe to do so (during the update function
within the breakpoint or stop machine calls). Or if dynamic ftrace is not
being used (static tracing) then we have to do a bit more synchronization
when the ftrace_trace_function is set as that takes affect immediately
(as oppose to dynamic ftrace doing it with the modification of the trampoline).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently there's no way to know what triggers exist on a kernel without
looking at the source of the kernel or randomly trying out triggers.
Instead of creating another file in the debugfs system, simply show
what available triggers are there when cat'ing the trigger file when
it has no events:
[root /sys/kernel/debug/tracing]# cat events/sched/sched_switch/trigger
# Available triggers:
# traceon traceoff snapshot stacktrace enable_event disable_event
This stays consistent with other debugfs files where meta data like
this is always proceeded with a '#' at the start of the line so that
tools can strip these out.
Link: http://lkml.kernel.org/r/20140107103548.0a84536d@gandalf.local.home
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The event trigger code that checks for callback triggers before and
after recording of an event has lots of flags checks. This code is
duplicated throughout the ftrace events, kprobes and system calls.
They all do the exact same checks against the event flags.
Added helper functions ftrace_trigger_soft_disabled(),
event_trigger_unlock_commit() and event_trigger_unlock_commit_regs()
that consolidated the code and these are used instead.
Link: http://lkml.kernel.org/r/20140106222703.5e7dbba2@gandalf.local.home
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The counters for the traceon and traceoff are only suppose to decrement
when the trigger enables or disables tracing. It is not suppose to decrement
every time the event is hit.
Only decrement the counter if the trigger actually did something.
Link: http://lkml.kernel.org/r/20140106223124.0e5fd0b4@gandalf.local.home
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's no reason to use double-underscores for any variable name in
ftrace_syscall_enter()/exit(), since those functions aren't generated
and there's no need to avoid namespace collisions as with the event
macros, which is where the original invocation code came from.
Link: http://lkml.kernel.org/r/0b489c9d1f7ee315cff60fa0e4c2b433ade8ae0d.1389036657.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add code to the kprobe/kretprobe event functions that will invoke any
event triggers associated with a probe's ftrace_event_file.
The code to do this is very similar to the invocation code already
used to invoke the triggers associated with static events and
essentially replaces the existing soft-disable checks with a superset
that preserves the original behavior but adds the bits needed to
support event triggers.
Link: http://lkml.kernel.org/r/f2d49f157b608070045fdb26c9564d5a05a5a7d0.1389036657.git.tom.zanussi@linux.intel.com
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When kprobe-based dynamic event tracer is not enabled, it caused
following build error:
kernel/built-in.o: In function `traceprobe_update_arg':
(.text+0x10c8dd): undefined reference to `fetch_symbol_u8'
kernel/built-in.o: In function `traceprobe_update_arg':
(.text+0x10c8e9): undefined reference to `fetch_symbol_u16'
kernel/built-in.o: In function `traceprobe_update_arg':
(.text+0x10c8f5): undefined reference to `fetch_symbol_u32'
kernel/built-in.o: In function `traceprobe_update_arg':
(.text+0x10c901): undefined reference to `fetch_symbol_u64'
kernel/built-in.o: In function `traceprobe_update_arg':
(.text+0x10c909): undefined reference to `fetch_symbol_string'
kernel/built-in.o: In function `traceprobe_update_arg':
(.text+0x10c913): undefined reference to `fetch_symbol_string_size'
...
It was due to the fetch methods are referred from CHECK_FETCH_FUNCS
macro and since it was only defined in trace_kprobe.c. Move NULL
definition of such fetch functions to the header file.
Note, it also requires CONFIG_BRANCH_PROFILING enabled to trigger
this failure as well. This is because the "fetch_symbol_*" variables
are referenced in a "else if" statement that will only call
update_symbol_cache(), which is a static inline stub function
when CONFIG_KPROBE_EVENT is not enabled. gcc is smart enough
to optimize this "else if" out and that also removes the code that
references the undefined variables.
But when BRANCH_PROFILING is enabled, it fools gcc into keeping
the if statement around and thus references the undefined symbols
and fails to build.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Enable to fetch data from a file offset. Currently it only supports
fetching from same binary uprobe set. It'll translate the file offset
to a proper virtual address in the process.
The syntax is "@+OFFSET" as it does similar to normal memory fetching
(@ADDR) which does no address translation.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Enable to fetch other types of argument for the uprobes. IOW, we can
access stack, memory, deref, bitfield and retval from uprobes now.
The format for the argument types are same as kprobes (but @SYMBOL
type is not supported for uprobes), i.e:
@ADDR : Fetch memory at ADDR
$stackN : Fetch Nth entry of stack (N >= 0)
$stack : Fetch stack address
$retval : Fetch return value
+|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address
Note that the retval only can be used with uretprobes.
Original-patch-by: Hyeoncheol Lee <cheol.lee@lge.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Hyeoncheol Lee <cheol.lee@lge.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Fetching from user space should be done in a non-atomic context. So
use a per-cpu buffer and copy its content to the ring buffer
atomically. Note that we can migrate during accessing user memory
thus use a per-cpu mutex to protect concurrent accesses.
This is needed since we'll be able to fetch args from an user memory
which can be swapped out. Before that uprobes could fetch args from
registers only which saved in a kernel space.
While at it, use __get_data_size() and store_trace_args() to reduce
code duplication. And add struct uprobe_cpu_buffer and its helpers as
suggested by Oleg.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Currently uprobes don't pass is_return to the argument parser so that
it cannot make use of "$retval" fetch method since it only works for
return probes.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Use separate method to fetch from memory. Move existing functions to
trace_kprobe.c and make them static. Also add new memory fetch
implementation for uprobes.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The deref fetch methods access a memory region but it assumes that
it's a kernel memory since uprobes does not support them.
Add ->fetch and ->fetch_size member in order to provide a proper
access methods for supporting uprobes.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Hyeoncheol Lee <cheol.lee@lge.com>
[namhyung@kernel.org: Split original patch into pieces as requested]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Move existing functions to trace_kprobe.c and add NULL entries to the
uprobes fetch type table. I don't make them static since some generic
routines like update/free_XXX_fetch_param() require pointers to the
functions.
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Use separate method to fetch from stack. Move existing functions to
trace_kprobe.c and make them static. Also add new stack fetch
implementation for uprobes.
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Use separate fetch_type_table for kprobes and uprobes. It currently
shares all fetch methods but some of them will be implemented
differently later.
This is not to break build if [ku]probes is configured alone (like
!CONFIG_KPROBE_EVENT and CONFIG_UPROBE_EVENT). So I added '__weak'
to the table declaration so that it can be safely omitted when it
configured out.
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Move fetch function helper macros/functions to the header file and
make them external. This is preparation of supporting uprobe fetch
table in next patch.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The set_print_fmt() functions are implemented almost same for
[ku]probes. Move it to a common place and get rid of the duplication.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The __get_data_size() and store_trace_args() will be used by uprobes
too. Move them to a common location.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Convert struct trace_uprobe to make use of the common trace_probe
structure.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
There are functions that can be shared to both of kprobes and uprobes.
Separate common data structure to struct trace_probe and use it from
the shared functions.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The print format of s32 type was "ld" and it's casted to "long". So
it turned out to print 4294967295 for "-1" on 64-bit systems. Not
sure whether it worked well on 32-bit systems.
Anyway, it doesn't need to have cast argument at all since it already
casted using type pointer - just get rid of it. Thanks to Oleg for
pointing that out.
And print 0x prefix for unsigned type as it shows hex numbers.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The uprobe syntax requires an offset after a file path not a symbol.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The filter field of the event_trigger_data structure is protected under
RCU sched locks. It was not annotated as such, and after doing so,
sparse pointed out several locations that required fix ups.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Trace event triggers added a lseek that uses the ftrace_filter_lseek()
function. Unfortunately, when function tracing is not configured in
that function is not defined and the kernel fails to build.
This is the second time that function was added to a file ops and
it broke the build due to requiring special config dependencies.
Make a generic tracing_lseek() that all the tracing utilities may
use.
Also, modify the old ftrace_filter_lseek() to return 0 instead of
1 on WRONLY. Not sure why it was a 1 as that does not make sense.
This also changes the old tracing_seek() to modify the file pos
pointer on WRONLY as well.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJSwLfoAAoJEHm+PkMAQRiGi6QH/1U1B7lmHChDTw3jj1lfm9gA
189Si4QJlnxFWCKHvKEL+pcaVuACU+aMGI8+KyMYK4/JfuWVjjj5fr/SvyHH2/8m
LdSK8aHMhJ46uBS4WJ/l6v46qQa5e2vn8RKSBAyKm/h4vpt+hd6zJdoFrFai4th7
k/TAwOAEHI5uzexUChwLlUBRTvbq4U8QUvDu+DeifC8cT63CGaaJ4qVzjOZrx1an
eP6UXZrKDASZs7RU950i7xnFVDQu4PsjlZi25udsbeiKcZJgPqGgXz5ULf8ZH8RQ
YCi1JOnTJRGGjyIOyLj7pyB01h7XiSM2+eMQ0S7g54F2s7gCJ58c2UwQX45vRWU=
=/4/R
-----END PGP SIGNATURE-----
Merge tag 'v3.13-rc6' into for-3.14/core
Needed to bring blk-mq uptodate, since changes have been going in
since for-3.14/core was established.
Fixup merge issues related to the immutable biovec changes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Conflicts:
block/blk-flush.c
fs/btrfs/check-integrity.c
fs/btrfs/extent_io.c
fs/btrfs/scrub.c
fs/logfs/dev_bdev.c
Add a generic event_command.set_trigger_filter() op implementation and
have the current set of trigger commands use it - this essentially
gives them all support for filters.
Syntactically, filters are supported by adding 'if <filter>' just
after the command, in which case only events matching the filter will
invoke the trigger. For example, to add a filter to an
enable/disable_event command:
echo 'enable_event:system:event if common_pid == 999' > \
.../othersys/otherevent/trigger
The above command will only enable the system:event event if the
common_pid field in the othersys:otherevent event is 999.
As another example, to add a filter to a stacktrace command:
echo 'stacktrace if common_pid == 999' > \
.../somesys/someevent/trigger
The above command will only trigger a stacktrace if the common_pid
field in the event is 999.
The filter syntax is the same as that described in the 'Event
filtering' section of Documentation/trace/events.txt.
Because triggers can now use filters, the trigger-invoking logic needs
to be moved in those cases - e.g. for ftrace_raw_event_calls, if a
trigger has a filter associated with it, the trigger invocation now
needs to happen after the { assign; } part of the call, in order for
the trigger condition to be tested.
There's still a SOFT_DISABLED-only check at the top of e.g. the
ftrace_raw_events function, so when an event is soft disabled but not
because of the presence of a trigger, the original SOFT_DISABLED
behavior remains unchanged.
There's also a bit of trickiness in that some triggers need to avoid
being invoked while an event is currently in the process of being
logged, since the trigger may itself log data into the trace buffer.
Thus we make sure the current event is committed before invoking those
triggers. To do that, we split the trigger invocation in two - the
first part (event_triggers_call()) checks the filter using the current
trace record; if a command has the post_trigger flag set, it sets a
bit for itself in the return value, otherwise it directly invoks the
trigger. Once all commands have been either invoked or set their
return flag, event_triggers_call() returns. The current record is
then either committed or discarded; if any commands have deferred
their triggers, those commands are finally invoked following the close
of the current event by event_triggers_post_call().
To simplify the above and make it more efficient, the TRIGGER_COND bit
is introduced, which is set only if a soft-disabled trigger needs to
use the log record for filter testing or needs to wait until the
current log record is closed.
The syscall event invocation code is also changed in analogous ways.
Because event triggers need to be able to create and free filters,
this also adds a couple external wrappers for the existing
create_filter and free_filter functions, which are too generic to be
made extern functions themselves.
Link: http://lkml.kernel.org/r/7164930759d8719ef460357f143d995406e4eead.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that event triggers use ftrace_event_file(), it needs to be outside
the #ifdef CONFIG_DYNAMIC_FTRACE, as it can now be used when that is
not defined.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add 'enable_event' and 'disable_event' event_command commands.
enable_event and disable_event event triggers are added by the user
via these commands in a similar way and using practically the same
syntax as the analagous 'enable_event' and 'disable_event' ftrace
function commands, but instead of writing to the set_ftrace_filter
file, the enable_event and disable_event triggers are written to the
per-event 'trigger' files:
echo 'enable_event:system:event' > .../othersys/otherevent/trigger
echo 'disable_event:system:event' > .../othersys/otherevent/trigger
The above commands will enable or disable the 'system:event' trace
events whenever the othersys:otherevent events are hit.
This also adds a 'count' version that limits the number of times the
command will be invoked:
echo 'enable_event:system:event:N' > .../othersys/otherevent/trigger
echo 'disable_event:system:event:N' > .../othersys/otherevent/trigger
Where N is the number of times the command will be invoked.
The above commands will will enable or disable the 'system:event'
trace events whenever the othersys:otherevent events are hit, but only
N times.
This also makes the find_event_file() helper function extern, since
it's useful to use from other places, such as the event triggers code,
so make it accessible.
Link: http://lkml.kernel.org/r/f825f3048c3f6b026ee37ae5825f9fc373451828.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add 'stacktrace' event_command. stacktrace event triggers are added
by the user via this command in a similar way and using practically
the same syntax as the analogous 'stacktrace' ftrace function command,
but instead of writing to the set_ftrace_filter file, the stacktrace
event trigger is written to the per-event 'trigger' files:
echo 'stacktrace' > .../tracing/events/somesys/someevent/trigger
The above command will turn on stacktraces for someevent i.e. whenever
someevent is hit, a stacktrace will be logged.
This also adds a 'count' version that limits the number of times the
command will be invoked:
echo 'stacktrace:N' > .../tracing/events/somesys/someevent/trigger
Where N is the number of times the command will be invoked.
The above command will log N stacktraces for someevent i.e. whenever
someevent is hit N times, a stacktrace will be logged.
Link: http://lkml.kernel.org/r/0c30c008a0828c660aa0e1bbd3255cf179ed5c30.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add 'snapshot' event_command. snapshot event triggers are added by
the user via this command in a similar way and using practically the
same syntax as the analogous 'snapshot' ftrace function command, but
instead of writing to the set_ftrace_filter file, the snapshot event
trigger is written to the per-event 'trigger' files:
echo 'snapshot' > .../somesys/someevent/trigger
The above command will turn on snapshots for someevent i.e. whenever
someevent is hit, a snapshot will be done.
This also adds a 'count' version that limits the number of times the
command will be invoked:
echo 'snapshot:N' > .../somesys/someevent/trigger
Where N is the number of times the command will be invoked.
The above command will snapshot N times for someevent i.e. whenever
someevent is hit N times, a snapshot will be done.
Also adds a new tracing_alloc_snapshot() function - the existing
tracing_snapshot_alloc() function is a special version of
tracing_snapshot() that also does the snapshot allocation - the
snapshot triggers would like to be able to do just the allocation but
not take a snapshot; the existing tracing_snapshot_alloc() in turn now
also calls tracing_alloc_snapshot() underneath to do that allocation.
Link: http://lkml.kernel.org/r/c9524dd07ce01f9dcbd59011290e0a8d5b47d7ad.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
[ fix up from kbuild test robot <fengguang.wu@intel.com report ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add 'traceon' and 'traceoff' event_command commands. traceon and
traceoff event triggers are added by the user via these commands in a
similar way and using practically the same syntax as the analagous
'traceon' and 'traceoff' ftrace function commands, but instead of
writing to the set_ftrace_filter file, the traceon and traceoff
triggers are written to the per-event 'trigger' files:
echo 'traceon' > .../tracing/events/somesys/someevent/trigger
echo 'traceoff' > .../tracing/events/somesys/someevent/trigger
The above command will turn tracing on or off whenever someevent is
hit.
This also adds a 'count' version that limits the number of times the
command will be invoked:
echo 'traceon:N' > .../tracing/events/somesys/someevent/trigger
echo 'traceoff:N' > .../tracing/events/somesys/someevent/trigger
Where N is the number of times the command will be invoked.
The above commands will will turn tracing on or off whenever someevent
is hit, but only N times.
Some common register/unregister_trigger() implementations of the
event_command reg()/unreg() callbacks are also provided, which add and
remove trigger instances to the per-event list of triggers, and
arm/disarm them as appropriate. event_trigger_callback() is a
general-purpose event_command func() implementation that orchestrates
command parsing and registration for most normal commands.
Most event commands will use these, but some will override and
possibly reuse them.
The event_trigger_init(), event_trigger_free(), and
event_trigger_print() functions are meant to be common implementations
of the event_trigger_ops init(), free(), and print() ops,
respectively.
Most trigger_ops implementations will use these, but some will
override and possibly reuse them.
Link: http://lkml.kernel.org/r/00a52816703b98d2072947478dd6e2d70cde5197.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a 'trigger' file for each trace event, enabling 'trace event
triggers' to be set for trace events.
'trace event triggers' are patterned after the existing 'ftrace
function triggers' implementation except that triggers are written to
per-event 'trigger' files instead of to a single file such as the
'set_ftrace_filter' used for ftrace function triggers.
The implementation is meant to be entirely separate from ftrace
function triggers, in order to keep the respective implementations
relatively simple and to allow them to diverge.
The event trigger functionality is built on top of SOFT_DISABLE
functionality. It adds a TRIGGER_MODE bit to the ftrace_event_file
flags which is checked when any trace event fires. Triggers set for a
particular event need to be checked regardless of whether that event
is actually enabled or not - getting an event to fire even if it's not
enabled is what's already implemented by SOFT_DISABLE mode, so trigger
mode directly reuses that. Event trigger essentially inherit the soft
disable logic in __ftrace_event_enable_disable() while adding a bit of
logic and trigger reference counting via tm_ref on top of that in a
new trace_event_trigger_enable_disable() function. Because the base
__ftrace_event_enable_disable() code now needs to be invoked from
outside trace_events.c, a wrapper is also added for those usages.
The triggers for an event are actually invoked via a new function,
event_triggers_call(), and code is also added to invoke them for
ftrace_raw_event calls as well as syscall events.
The main part of the patch creates a new trace_events_trigger.c file
to contain the trace event triggers implementation.
The standard open, read, and release file operations are implemented
here.
The open() implementation sets up for the various open modes of the
'trigger' file. It creates and attaches the trigger iterator and sets
up the command parser. If opened for reading set up the trigger
seq_ops.
The read() implementation parses the event trigger written to the
'trigger' file, looks up the trigger command, and passes it along to
that event_command's func() implementation for command-specific
processing.
The release() implementation does whatever cleanup is needed to
release the 'trigger' file, like releasing the parser and trigger
iterator, etc.
A couple of functions for event command registration and
unregistration are added, along with a list to add them to and a mutex
to protect them, as well as an (initially empty) registration function
to add the set of commands that will be added by future commits, and
call to it from the trace event initialization code.
also added are a couple trigger-specific data structures needed for
these implementations such as a trigger iterator and a struct for
trigger-specific data.
A couple structs consisting mostly of function meant to be implemented
in command-specific ways, event_command and event_trigger_ops, are
used by the generic event trigger command implementations. They're
being put into trace.h alongside the other trace_event data structures
and functions, in the expectation that they'll be needed in several
trace_event-related files such as trace_events_trigger.c and
trace_events.c.
The event_command.func() function is meant to be called by the trigger
parsing code in order to add a trigger instance to the corresponding
event. It essentially coordinates adding a live trigger instance to
the event, and arming the triggering the event.
Every event_command func() implementation essentially does the
same thing for any command:
- choose ops - use the value of param to choose either a number or
count version of event_trigger_ops specific to the command
- do the register or unregister of those ops
- associate a filter, if specified, with the triggering event
The reg() and unreg() ops allow command-specific implementations for
event_trigger_op registration and unregistration, and the
get_trigger_ops() op allows command-specific event_trigger_ops
selection to be parameterized. When a trigger instance is added, the
reg() op essentially adds that trigger to the triggering event and
arms it, while unreg() does the opposite. The set_filter() function
is used to associate a filter with the trigger - if the command
doesn't specify a set_filter() implementation, the command will ignore
filters.
Each command has an associated trigger_type, which serves double duty,
both as a unique identifier for the command as well as a value that
can be used for setting a trigger mode bit during trigger invocation.
The signature of func() adds a pointer to the event_command struct,
used to invoke those functions, along with a command_data param that
can be passed to the reg/unreg functions. This allows func()
implementations to use command-specific blobs and supports code
re-use.
The event_trigger_ops.func() command corrsponds to the trigger 'probe'
function that gets called when the triggering event is actually
invoked. The other functions are used to list the trigger when
needed, along with a couple mundane book-keeping functions.
This also moves event_file_data() into trace.h so it can be used
outside of trace_events.c.
Link: http://lkml.kernel.org/r/316d95061accdee070aac8e5750afba0192fa5b9.1382622043.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Idea-by: Steve Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The problem is that the profiler only initializes the online
CPUs, and not possible CPUs. This causes issues if the user takes
CPUs online or offline while the profiler is running.
If we online a CPU after starting the profiler, we lose all the
trace information on the CPU going online.
If we offline a CPU after running a test and start a new test, it
will not clear the old data from that CPU.
This bug causes incorrect data to be reported to the user if they
online or offline CPUs during the profiling.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSsNBHAAoJEKQekfcNnQGuKP8H/2mol/d7z2vANh7/FeNjTKIN
VkRzDEwUIwoaJBsL75EDDXBFx7w8jjAsXyoTrqrvMRV4UNcsfm46mohQTPAmK39y
muqodL1VnVXdKrUmtw/1nL7yDi2KltQH1UwOgvwXGuUFIq5cuCXNQxNK9/1fVVVn
tIMNz5kEAG3XCwnqP0PgQxWCuA7s+aQR0ijTf4vPf1G3IJujPyG9VhJWcGS3dJTR
t8TPyatd9D/S+7/r7iZ9hS8nWpaka3qJfhiWqk16SC9LiUXVA8oFOVMoN7n6Co5E
6r2dNo01WOABlojCxi1t3afUtcV1bUjBnVkiDva5cSc84pQSxe1qRrIpjTmHk00=
=MSZs
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fix from Steven Rostedt:
"This fixes a long standing bug in the ftrace profiler. The problem is
that the profiler only initializes the online CPUs, and not possible
CPUs. This causes issues if the user takes CPUs online or offline
while the profiler is running.
If we online a CPU after starting the profiler, we lose all the trace
information on the CPU going online.
If we offline a CPU after running a test and start a new test, it will
not clear the old data from that CPU.
This bug causes incorrect data to be reported to the user if they
online or offline CPUs during the profiling"
* tag 'trace-fixes-v3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Initialize the ftrace profiler for each possible cpu
Ftrace currently initializes only the online CPUs. This implementation has
two problems:
- If we online a CPU after we enable the function profile, and then run the
test, we will lose the trace information on that CPU.
Steps to reproduce:
# echo 0 > /sys/devices/system/cpu/cpu1/online
# cd <debugfs>/tracing/
# echo <some function name> >> set_ftrace_filter
# echo 1 > function_profile_enabled
# echo 1 > /sys/devices/system/cpu/cpu1/online
# run test
- If we offline a CPU before we enable the function profile, we will not clear
the trace information when we enable the function profile. It will trouble
the users.
Steps to reproduce:
# cd <debugfs>/tracing/
# echo <some function name> >> set_ftrace_filter
# echo 1 > function_profile_enabled
# run test
# cat trace_stat/function*
# echo 0 > /sys/devices/system/cpu/cpu1/online
# echo 0 > function_profile_enabled
# echo 1 > function_profile_enabled
# cat trace_stat/function*
# run test
# cat trace_stat/function*
So it is better that we initialize the ftrace profiler for each possible cpu
every time we enable the function profile instead of just the online ones.
Link: http://lkml.kernel.org/r/1387178401-10619-1-git-send-email-miaox@cn.fujitsu.com
Cc: stable@vger.kernel.org # 2.6.31+
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
all events. This was prevalent when FTRACE_SELFTEST was enabled which
enables all events several times, and caused the system bootup to
pause for over a minute.
This was tracked down to an addition of a synchronize_sched() performed
when system call tracepoints are unregistered.
The synchronize_sched() is needed between the unregistering of the
system call tracepoint and a deletion of a tracing instance buffer.
But placing the synchronize_sched() in the unreg of *every* system call
tracepoint is a bit overboard. A single synchronize_sched() before
the deletion of the instance is sufficient.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSofYNAAoJEKQekfcNnQGuTUcIAJOx8745KlkFjN4VX+nCWNfP
xrrpnLBymbGMA9lQ4fXk+kdiuhH8DjRYdKq9fU4T481MFYKkToUIZH6NeaLI5fr1
0nBPPjVyAlJ+yt9JbOAYa1jEYnAr27ORDHEtdQnqb6OJSky3oh9jCQi+toxmh2qX
Sv1tIYeAf3K2V/h5xt6uSl9oiZ6KBtwE3f+xkHWNizaU9i2rq2gxd77fSbPNTIps
wLdsESYziA2UeAm13eh8xXo1uqRbfvx7bPr59cu0+3AqdOoaXFG+JoE/MqmljIO5
HkyCKJVqP8HD+QieuEB+hw4zpSsl6A6iKSlaiHm8NMnRRocfM6qMKMQXQ28KhxA=
=sYm/
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"A regression showed up that there's a large delay when enabling all
events. This was prevalent when FTRACE_SELFTEST was enabled which
enables all events several times, and caused the system bootup to
pause for over a minute.
This was tracked down to an addition of a synchronize_sched()
performed when system call tracepoints are unregistered.
The synchronize_sched() is needed between the unregistering of the
system call tracepoint and a deletion of a tracing instance buffer.
But placing the synchronize_sched() in the unreg of *every* system
call tracepoint is a bit overboard. A single synchronize_sched()
before the deletion of the instance is sufficient"
* tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Only run synchronize_sched() at instance deletion time
It has been reported that boot up with FTRACE_SELFTEST enabled can take a
very long time. There can be stalls of over a minute.
This was tracked down to the synchronize_sched() called when a system call
event is disabled. As the self tests enable and disable thousands of events,
this makes the synchronize_sched() get called thousands of times.
The synchornize_sched() was added with d562aff93b "tracing: Add support
for SOFT_DISABLE to syscall events" which caused this regression (added
in 3.13-rc1).
The synchronize_sched() is to protect against the events being accessed
when a tracer instance is being deleted. When an instance is being deleted
all the events associated to it are unregistered. The synchronize_sched()
makes sure that no more users are running when it finishes.
Instead of calling synchronize_sched() for all syscall events, we only
need to call it once, after the events are unregistered and before the
instance is deleted. The event_mutex is held during this action to
prevent new users from enabling events.
Link: http://lkml.kernel.org/r/20131203124120.427b9661@gandalf.local.home
Reported-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Petr Mladek <pmladek@suse.cz>
Tested-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull perf fixes from Ingo Molnar:
"Misc kernel and tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools lib traceevent: Fix conversion of pointer to integer of different size
perf/trace: Properly use u64 to hold event_id
perf: Remove fragile swevent hlist optimization
ftrace, perf: Avoid infinite event generation loop
tools lib traceevent: Fix use of multiple options in processing field
perf header: Fix possible memory leaks in process_group_desc()
perf header: Fix bogus group name
perf tools: Tag thread comm as overriden
Commit 8c4f3c3fa9 "ftrace: Check module functions being traced on reload"
fixed module loading and unloading with respect to function tracing, but
it missed the function graph tracer. If you perform the following
# cd /sys/kernel/debug/tracing
# echo function_graph > current_tracer
# modprobe nfsd
# echo nop > current_tracer
You'll get the following oops message:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 2910 at /linux.git/kernel/trace/ftrace.c:1640 __ftrace_hash_rec_update.part.35+0x168/0x1b9()
Modules linked in: nfsd exportfs nfs_acl lockd ipt_MASQUERADE sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables uinput snd_hda_codec_idt
CPU: 2 PID: 2910 Comm: bash Not tainted 3.13.0-rc1-test #7
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
0000000000000668 ffff8800787efcf8 ffffffff814fe193 ffff88007d500000
0000000000000000 ffff8800787efd38 ffffffff8103b80a 0000000000000668
ffffffff810b2b9a ffffffff81a48370 0000000000000001 ffff880037aea000
Call Trace:
[<ffffffff814fe193>] dump_stack+0x4f/0x7c
[<ffffffff8103b80a>] warn_slowpath_common+0x81/0x9b
[<ffffffff810b2b9a>] ? __ftrace_hash_rec_update.part.35+0x168/0x1b9
[<ffffffff8103b83e>] warn_slowpath_null+0x1a/0x1c
[<ffffffff810b2b9a>] __ftrace_hash_rec_update.part.35+0x168/0x1b9
[<ffffffff81502f89>] ? __mutex_lock_slowpath+0x364/0x364
[<ffffffff810b2cc2>] ftrace_shutdown+0xd7/0x12b
[<ffffffff810b47f0>] unregister_ftrace_graph+0x49/0x78
[<ffffffff810c4b30>] graph_trace_reset+0xe/0x10
[<ffffffff810bf393>] tracing_set_tracer+0xa7/0x26a
[<ffffffff810bf5e1>] tracing_set_trace_write+0x8b/0xbd
[<ffffffff810c501c>] ? ftrace_return_to_handler+0xb2/0xde
[<ffffffff811240a8>] ? __sb_end_write+0x5e/0x5e
[<ffffffff81122aed>] vfs_write+0xab/0xf6
[<ffffffff8150a185>] ftrace_graph_caller+0x85/0x85
[<ffffffff81122dbd>] SyS_write+0x59/0x82
[<ffffffff8150a185>] ftrace_graph_caller+0x85/0x85
[<ffffffff8150a2d2>] system_call_fastpath+0x16/0x1b
---[ end trace 940358030751eafb ]---
The above mentioned commit didn't go far enough. Well, it covered the
function tracer by adding checks in __register_ftrace_function(). The
problem is that the function graph tracer circumvents that (for a slight
efficiency gain when function graph trace is running with a function
tracer. The gain was not worth this).
The problem came with ftrace_startup() which should always be called after
__register_ftrace_function(), if you want this bug to be completely fixed.
Anyway, this solution moves __register_ftrace_function() inside of
ftrace_startup() and removes the need to call them both.
Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Fixes: ed926f9b35 ("ftrace: Use counters to enable functions to trace")
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The 64-bit attr.config value for perf trace events was being copied into
an "int" before doing a comparison, meaning the top 32 bits were
being truncated.
As far as I can tell this didn't cause any errors, but it did mean
it was possible to create valid aliases for all the tracepoint ids
which I don't think was intended. (For example, 0xffffffff00000018
and 0x18 both enable the same tracepoint).
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1311151236100.11932@vincent-weaver-1.um.maine.edu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vince's perf-trinity fuzzer found yet another 'interesting' problem.
When we sample the irq_work_exit tracepoint with period==1 (or
PERF_SAMPLE_PERIOD) and we add an fasync SIGNAL handler we create an
infinite event generation loop:
,-> <IPI>
| irq_work_exit() ->
| trace_irq_work_exit() ->
| ...
| __perf_event_overflow() -> (due to fasync)
| irq_work_queue() -> (irq_work_list must be empty)
'--------- arch_irq_work_raise()
Similar things can happen due to regular poll() wakeups if we exceed
the ring-buffer wakeup watermark, or have an event_limit.
To avoid this, dis-allow sampling this particular tracepoint.
In order to achieve this, create a special perf_perm function pointer
for each event and call this (when set) on trying to create a
tracepoint perf event.
[ roasted: use expr... to allow for ',' in your expression ]
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20131114152304.GC5364@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The only real feature that was added this release is from Namhyung Kim,
who introduced "set_graph_notrace" filter that lets you run the function
graph tracer and not trace particular functions and their call chain.
Tom Zanussi added some updates to the ftrace multibuffer tracing that
made it more consistent with the top level tracing.
One of the fixes for perf function tracing required an API change in
RCU; the addition of "rcu_is_watching()". As Paul McKenney is pushing
that change in this release too, he gave me a branch that included
all the changes to get that working, and I pulled that into my tree
in order to complete the perf function tracing fix.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSgX5SAAoJEKQekfcNnQGulUAH/jORqJrKaNAulmZ314VsAqfa
zMtF5UAAPf7kqc3AN/jtFrhJUNEfxWOo7A4r0FsM/rKdWJF+98GA6aqYVD+XoWFt
+36fg1enxbXUjixQ96Uh+o1+BJUgYDqljuWzqSu/oiXWfWwl8+WL4kcbhb+V9WcF
SpdzLCWVZRfhyDiN3+0zvyQ8RSG2Pd7CWn9zroI0e4sxGo0Ki6JUnIcXtZGOBDOQ
IIZdjXvGSfpJ+3u3XvRPXJcltRCtOsVWxYzrmvRlmHDW5QMe1+WmmrlojTePrLaJ
xn8+3WINqetAR+ZQnazbpt1XzJzKa8QtFgpiN0kT6qL7cg3N1Owc4vLGohl7wok=
=Nesf
-----END PGP SIGNATURE-----
Merge tag 'trace-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing update from Steven Rostedt:
"This batch of changes is mostly clean ups and small bug fixes. The
only real feature that was added this release is from Namhyung Kim,
who introduced "set_graph_notrace" filter that lets you run the
function graph tracer and not trace particular functions and their
call chain.
Tom Zanussi added some updates to the ftrace multibuffer tracing that
made it more consistent with the top level tracing.
One of the fixes for perf function tracing required an API change in
RCU; the addition of "rcu_is_watching()". As Paul McKenney is pushing
that change in this release too, he gave me a branch that included all
the changes to get that working, and I pulled that into my tree in
order to complete the perf function tracing fix"
* tag 'trace-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Add rcu annotation for syscall trace descriptors
tracing: Do not use signed enums with unsigned long long in fgragh output
tracing: Remove unused function ftrace_off_permanent()
tracing: Do not assign filp->private_data to freed memory
tracing: Add helper function tracing_is_disabled()
tracing: Open tracer when ftrace_dump_on_oops is used
tracing: Add support for SOFT_DISABLE to syscall events
tracing: Make register/unregister_ftrace_command __init
tracing: Update event filters for multibuffer
recordmcount.pl: Add support for __fentry__
ftrace: Have control op function callback only trace when RCU is watching
rcu: Do not trace rcu_is_watching() functions
ftrace/x86: skip over the breakpoint for ftrace caller
trace/trace_stat: use rbtree postorder iteration helper instead of opencoding
ftrace: Add set_graph_notrace filter
ftrace: Narrow down the protected area of graph_lock
ftrace: Introduce struct ftrace_graph_data
ftrace: Get rid of ftrace_graph_filter_enabled
tracing: Fix potential out-of-bounds in trace_get_user()
tracing: Show more exact help information about snapshot
Pull block IO core updates from Jens Axboe:
"This is the pull request for the core changes in the block layer for
3.13. It contains:
- The new blk-mq request interface.
This is a new and more scalable queueing model that marries the
best part of the request based interface we currently have (which
is fully featured, but scales poorly) and the bio based "interface"
which the new drivers for high IOPS devices end up using because
it's much faster than the request based one.
The bio interface has no block layer support, since it taps into
the stack much earlier. This means that drivers end up having to
implement a lot of functionality on their own, like tagging,
timeout handling, requeue, etc. The blk-mq interface provides all
these. Some drivers even provide a switch to select bio or rq and
has code to handle both, since things like merging only works in
the rq model and hence is faster for some workloads. This is a
huge mess. Conversion of these drivers nets us a substantial code
reduction. Initial results on converting SCSI to this model even
shows an 8x improvement on single queue devices. So while the
model was intended to work on the newer multiqueue devices, it has
substantial improvements for "classic" hardware as well. This code
has gone through extensive testing and development, it's now ready
to go. A pull request is coming to convert virtio-blk to this
model will be will be coming as well, with more drivers scheduled
for 3.14 conversion.
- Two blktrace fixes from Jan and Chen Gang.
- A plug merge fix from Alireza Haghdoost.
- Conversion of __get_cpu_var() from Christoph Lameter.
- Fix for sector_div() with 64-bit divider from Geert Uytterhoeven.
- A fix for a race between request completion and the timeout
handling from Jeff Moyer. This is what caused the merge conflict
with blk-mq/core, in case you are looking at that.
- A dm stacking fix from Mike Snitzer.
- A code consolidation fix and duplicated code removal from Kent
Overstreet.
- A handful of block bug fixes from Mikulas Patocka, fixing a loop
crash and memory corruption on blk cg.
- Elevator switch bug fix from Tomoki Sekiyama.
A heads-up that I had to rebase this branch. Initially the immutable
bio_vecs had been queued up for inclusion, but a week later, it became
clear that it wasn't fully cooked yet. So the decision was made to
pull this out and postpone it until 3.14. It was a straight forward
rebase, just pruning out the immutable series and the later fixes of
problems with it. The rest of the patches applied directly and no
further changes were made"
* 'for-3.13/core' of git://git.kernel.dk/linux-block: (31 commits)
block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
block: Do not call sector_div() with a 64-bit divisor
kernel: trace: blktrace: remove redundent memcpy() in compat_blk_trace_setup()
block: Consolidate duplicated bio_trim() implementations
block: Use rw_copy_check_uvector()
block: Enable sysfs nomerge control for I/O requests in the plug list
block: properly stack underlying max_segment_size to DM device
elevator: acquire q->sysfs_lock in elevator_change()
elevator: Fix a race in elevator switching and md device initialization
block: Replace __get_cpu_var uses
bdi: test bdi_init failure
block: fix a probe argument to blk_register_region
loop: fix crash if blk_alloc_queue fails
blk-core: Fix memory corruption if blkcg_init_queue fails
block: fix race between request completion and timeout handling
blktrace: Send BLK_TN_PROCESS events to all running traces
blk-mq: don't disallow request merges for req->special being set
blk-mq: mq plug list breakage
blk-mq: fix for flush deadlock
...
Pull scheduler changes from Ingo Molnar:
"The main changes in this cycle are:
- (much) improved CONFIG_NUMA_BALANCING support from Mel Gorman, Rik
van Riel, Peter Zijlstra et al. Yay!
- optimize preemption counter handling: merge the NEED_RESCHED flag
into the preempt_count variable, by Peter Zijlstra.
- wait.h fixes and code reorganization from Peter Zijlstra
- cfs_bandwidth fixes from Ben Segall
- SMP load-balancer cleanups from Peter Zijstra
- idle balancer improvements from Jason Low
- other fixes and cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
ftrace, sched: Add TRACE_FLAG_PREEMPT_RESCHED
stop_machine: Fix race between stop_two_cpus() and stop_cpus()
sched: Remove unnecessary iteration over sched domains to update nr_busy_cpus
sched: Fix asymmetric scheduling for POWER7
sched: Move completion code from core.c to completion.c
sched: Move wait code from core.c to wait.c
sched: Move wait.c into kernel/sched/
sched/wait: Fix __wait_event_interruptible_lock_irq_timeout()
sched: Avoid throttle_cfs_rq() racing with period_timer stopping
sched: Guarantee new group-entities always have weight
sched: Fix hrtimer_cancel()/rq->lock deadlock
sched: Fix cfs_bandwidth misuse of hrtimer_expires_remaining
sched: Fix race on toggling cfs_bandwidth_used
sched: Remove extra put_online_cpus() inside sched_setaffinity()
sched/rt: Fix task_tick_rt() comment
sched/wait: Fix build breakage
sched/wait: Introduce prepare_to_wait_event()
sched/wait: Add ___wait_cond_timeout() to wait_event*_timeout() too
sched: Remove get_online_cpus() usage
sched: Fix race in migrate_swap_stop()
...
sparse complains about the enter/exit_sysycall_files[] variables being
dereferenced with rcu_dereference_sched(). The fields need to be
annotated with __rcu.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since the introduction of PREEMPT_NEED_RESCHED in:
f27dde8dee ("sched: Add NEED_RESCHED to the preempt_count")
we need to be able to look at both TIF_NEED_RESCHED and
PREEMPT_NEED_RESCHED to understand the full preemption behaviour.
Add it to the trace output.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Link: http://lkml.kernel.org/r/20131004152826.GP3081@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
do_blk_trace_setup() will fully initialize 'buts.name', so can remove
the related memcpy(). And also use BLKTRACE_BDEV_SIZE and ARRAY_SIZE
instead of hard code number '32'.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently each task sends BLK_TN_PROCESS event to the first traced
device it interacts with after a new trace is started. When there are
several traced devices and the task accesses more devices, this logic
can result in BLK_TN_PROCESS being sent several times to some devices
while it is never sent to other devices. Thus blkparse doesn't display
command name when parsing some blktrace files.
Fix the problem by sending BLK_TN_PROCESS event to all traced devices
when a task interacts with any of them.
Signed-off-by: Jan Kara <jack@suse.cz>
Review-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The duration field of print_graph_duration() can also be used
to do the space filling by passing an enum in it:
DURATION_FILL_FULL
DURATION_FILL_START
DURATION_FILL_END
The problem is that these are enums and defined as negative,
but the duration field is unsigned long long. Most archs are
fine with this but blackfin fails to compile because of it:
kernel/built-in.o: In function `print_graph_duration':
kernel/trace/trace_functions_graph.c:782: undefined reference to `__ucmpdi2'
Overloading a unsigned long long with an signed enum is just
bad in principle. We can accomplish the same thing by using
part of the flags field instead.
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In the past, ftrace_off_permanent() was called if something
strange was detected. But the ftrace_bug() now handles all the
anomolies that can happen with ftrace (function tracing), and there
are no uses of ftrace_off_permanent(). Get rid of it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In system_tr_open(), the filp->private_data can be assigned the 'dir'
variable even if it was freed. This is on the error path, and is
harmless because the error return code will prevent filp->private_data
from being used. But for correctness, we should not assign it to
a recently freed variable, as that can cause static tools to give
false warnings.
Also have both subsystem_open() and system_tr_open() return -ENODEV
if tracing has been disabled.
Link: http://lkml.kernel.org/r/1383764571-7318-1-git-send-email-geyslan@gmail.com
Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The current default perf paranoid level is "1" which has
"perf_paranoid_kernel()" return false, and giving any operations that
use it, access to normal users. Unfortunately, this includes function
tracing and normal users should not be allowed to enable function
tracing by default.
The proper level is defined at "-1" (full perf access), which
"perf_paranoid_tracepoint_raw()" will only give access to. Use that
check instead for enabling function tracing.
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: stable@vger.kernel.org # 3.4+
CVE: CVE-2013-2930
Fixes: ced39002f5 ("ftrace, perf: Add support to use function tracepoint in perf")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With ftrace_dump_on_oops, we previously did not open the tracer in
question, sometimes causing the trace output to be useless.
For example, the function_graph tracer with tracing_thresh set dumped via
ftrace_dump_on_oops would show a series of '}' indented at different levels,
but no function names.
call trace->open() (and do a few other fixups copied from the normal dump
path) to make the output more intelligible.
Link: http://lkml.kernel.org/r/1382554197-16961-1-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The original SOFT_DISABLE patches didn't add support for soft disable
of syscall events; this adds it.
Add an array of ftrace_event_file pointers indexed by syscall number
to the trace array and remove the existing enabled bitmaps, which as a
result are now redundant. The ftrace_event_file structs in turn
contain the soft disable flags we need for per-syscall soft disable
accounting.
Adding ftrace_event_files also means we can remove the USE_CALL_FILTER
bit, thus enabling multibuffer filter support for syscall events.
Link: http://lkml.kernel.org/r/6e72b566e85d8df8042f133efbc6c30e21fb017e.1382620672.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace event filters are still tied to event calls rather than
event files, which means you don't get what you'd expect when using
filters in the multibuffer case:
Before:
# echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
# cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
bytes_alloc > 8192
# mkdir /sys/kernel/debug/tracing/instances/test1
# echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
# cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
bytes_alloc > 2048
# cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
bytes_alloc > 2048
Setting the filter in tracing/instances/test1/events shouldn't affect
the same event in tracing/events as it does above.
After:
# echo 'bytes_alloc > 8192' > /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
# cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
bytes_alloc > 8192
# mkdir /sys/kernel/debug/tracing/instances/test1
# echo 'bytes_alloc > 2048' > /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
# cat /sys/kernel/debug/tracing/events/kmem/kmalloc/filter
bytes_alloc > 8192
# cat /sys/kernel/debug/tracing/instances/test1/events/kmem/kmalloc/filter
bytes_alloc > 2048
We'd like to just move the filter directly from ftrace_event_call to
ftrace_event_file, but there are a couple cases that don't yet have
multibuffer support and therefore have to continue using the current
event_call-based filters. For those cases, a new USE_CALL_FILTER bit
is added to the event_call flags, whose main purpose is to keep the
old behavior for those cases until they can be updated with
multibuffer support; at that point, the USE_CALL_FILTER flag (and the
new associated call_filter_check_discard() function) can go away.
The multibuffer support also made filter_current_check_discard()
redundant, so this change removes that function as well and replaces
it with filter_check_discard() (or call_filter_check_discard() as
appropriate).
Link: http://lkml.kernel.org/r/f16e9ce4270c62f46b2e966119225e1c3cca7e60.1382620672.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Dave Jones reported that trinity would be able to trigger the following
back trace:
===============================
[ INFO: suspicious RCU usage. ]
3.10.0-rc2+ #38 Not tainted
-------------------------------
include/linux/rcupdate.h:771 rcu_read_lock() used illegally while idle!
other info that might help us debug this:
RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0
RCU used illegally from extended quiescent state!
1 lock held by trinity-child1/18786:
#0: (rcu_read_lock){.+.+..}, at: [<ffffffff8113dd48>] __perf_event_overflow+0x108/0x310
stack backtrace:
CPU: 3 PID: 18786 Comm: trinity-child1 Not tainted 3.10.0-rc2+ #38
0000000000000000 ffff88020767bac8 ffffffff816e2f6b ffff88020767baf8
ffffffff810b5897 ffff88021de92520 0000000000000000 ffff88020767bbf8
0000000000000000 ffff88020767bb78 ffffffff8113ded4 ffffffff8113dd48
Call Trace:
[<ffffffff816e2f6b>] dump_stack+0x19/0x1b
[<ffffffff810b5897>] lockdep_rcu_suspicious+0xe7/0x120
[<ffffffff8113ded4>] __perf_event_overflow+0x294/0x310
[<ffffffff8113dd48>] ? __perf_event_overflow+0x108/0x310
[<ffffffff81309289>] ? __const_udelay+0x29/0x30
[<ffffffff81076054>] ? __rcu_read_unlock+0x54/0xa0
[<ffffffff816f4000>] ? ftrace_call+0x5/0x2f
[<ffffffff8113dfa1>] perf_swevent_overflow+0x51/0xe0
[<ffffffff8113e08f>] perf_swevent_event+0x5f/0x90
[<ffffffff8113e1c9>] perf_tp_event+0x109/0x4f0
[<ffffffff8113e36f>] ? perf_tp_event+0x2af/0x4f0
[<ffffffff81074630>] ? __rcu_read_lock+0x20/0x20
[<ffffffff8112d79f>] perf_ftrace_function_call+0xbf/0xd0
[<ffffffff8110e1e1>] ? ftrace_ops_control_func+0x181/0x210
[<ffffffff81074630>] ? __rcu_read_lock+0x20/0x20
[<ffffffff81100cae>] ? rcu_eqs_enter_common+0x5e/0x470
[<ffffffff8110e1e1>] ftrace_ops_control_func+0x181/0x210
[<ffffffff816f4000>] ftrace_call+0x5/0x2f
[<ffffffff8110e229>] ? ftrace_ops_control_func+0x1c9/0x210
[<ffffffff816f4000>] ? ftrace_call+0x5/0x2f
[<ffffffff81074635>] ? debug_lockdep_rcu_enabled+0x5/0x40
[<ffffffff81074635>] ? debug_lockdep_rcu_enabled+0x5/0x40
[<ffffffff81100cae>] ? rcu_eqs_enter_common+0x5e/0x470
[<ffffffff8110112a>] rcu_eqs_enter+0x6a/0xb0
[<ffffffff81103673>] rcu_user_enter+0x13/0x20
[<ffffffff8114541a>] user_enter+0x6a/0xd0
[<ffffffff8100f6d8>] syscall_trace_leave+0x78/0x140
[<ffffffff816f46af>] int_check_syscall_exit_work+0x34/0x3d
------------[ cut here ]------------
Perf uses rcu_read_lock() but as the function tracer can trace functions
even when RCU is not currently active, this makes the rcu_read_lock()
used by perf ineffective.
As perf is currently the only user of the ftrace_ops_control_func() and
perf is also the only function callback that actively uses rcu_read_lock(),
the quick fix is to prevent the ftrace_ops_control_func() from calling
its callbacks if RCU is not active.
With Paul's new "rcu_is_watching()" we can tell if RCU is active or not.
Reported-by: Dave Jones <davej@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use rbtree_postorder_for_each_entry_safe() to destroy the rbtree instead
of opencoding an alternate postorder iteration that modifies the tree
Link: http://lkml.kernel.org/r/1383345566-25087-2-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The parser set up is just a generic utility that uses local variables
allocated by the function. There's no need to hold the graph_lock for
this set up.
This also makes the code simpler.
Link: http://lkml.kernel.org/r/1381739066-7531-4-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The struct ftrace_graph_data is for generalizing the access to
set_graph_function file. This is a preparation for adding support to
set_graph_notrace.
Link: http://lkml.kernel.org/r/1381739066-7531-3-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace_graph_filter_enabled means that user sets function filter
and it always has same meaning of ftrace_graph_count > 0.
Link: http://lkml.kernel.org/r/1381739066-7531-2-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Andrey reported the following report:
ERROR: AddressSanitizer: heap-buffer-overflow on address ffff8800359c99f3
ffff8800359c99f3 is located 0 bytes to the right of 243-byte region [ffff8800359c9900, ffff8800359c99f3)
Accessed by thread T13003:
#0 ffffffff810dd2da (asan_report_error+0x32a/0x440)
#1 ffffffff810dc6b0 (asan_check_region+0x30/0x40)
#2 ffffffff810dd4d3 (__tsan_write1+0x13/0x20)
#3 ffffffff811cd19e (ftrace_regex_release+0x1be/0x260)
#4 ffffffff812a1065 (__fput+0x155/0x360)
#5 ffffffff812a12de (____fput+0x1e/0x30)
#6 ffffffff8111708d (task_work_run+0x10d/0x140)
#7 ffffffff810ea043 (do_exit+0x433/0x11f0)
#8 ffffffff810eaee4 (do_group_exit+0x84/0x130)
#9 ffffffff810eafb1 (SyS_exit_group+0x21/0x30)
#10 ffffffff81928782 (system_call_fastpath+0x16/0x1b)
Allocated by thread T5167:
#0 ffffffff810dc778 (asan_slab_alloc+0x48/0xc0)
#1 ffffffff8128337c (__kmalloc+0xbc/0x500)
#2 ffffffff811d9d54 (trace_parser_get_init+0x34/0x90)
#3 ffffffff811cd7b3 (ftrace_regex_open+0x83/0x2e0)
#4 ffffffff811cda7d (ftrace_filter_open+0x2d/0x40)
#5 ffffffff8129b4ff (do_dentry_open+0x32f/0x430)
#6 ffffffff8129b668 (finish_open+0x68/0xa0)
#7 ffffffff812b66ac (do_last+0xb8c/0x1710)
#8 ffffffff812b7350 (path_openat+0x120/0xb50)
#9 ffffffff812b8884 (do_filp_open+0x54/0xb0)
#10 ffffffff8129d36c (do_sys_open+0x1ac/0x2c0)
#11 ffffffff8129d4b7 (SyS_open+0x37/0x50)
#12 ffffffff81928782 (system_call_fastpath+0x16/0x1b)
Shadow bytes around the buggy address:
ffff8800359c9700: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
ffff8800359c9780: fd fd fd fd fd fd fd fd fa fa fa fa fa fa fa fa
ffff8800359c9800: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
ffff8800359c9880: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
ffff8800359c9900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>ffff8800359c9980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00[03]fb
ffff8800359c9a00: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
ffff8800359c9a80: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
ffff8800359c9b00: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
ffff8800359c9b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8800359c9c00: 00 00 00 00 00 00 00 00 fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap redzone: fa
Heap kmalloc redzone: fb
Freed heap region: fd
Shadow gap: fe
The out-of-bounds access happens on 'parser->buffer[parser->idx] = 0;'
Although the crash happened in ftrace_regex_open() the real bug
occurred in trace_get_user() where there's an incrementation to
parser->idx without a check against the size. The way it is triggered
is if userspace sends in 128 characters (EVENT_BUF_SIZE + 1), the loop
that reads the last character stores it and then breaks out because
there is no more characters. Then the last character is read to determine
what to do next, and the index is incremented without checking size.
Then the caller of trace_get_user() usually nulls out the last character
with a zero, but since the index is equal to the size, it writes a nul
character after the allocated space, which can corrupt memory.
Luckily, only root user has write access to this file.
Link: http://lkml.kernel.org/r/20131009222323.04fd1a0d@gandalf.local.home
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The current "help" that comes out of the snapshot file when it is
not allocated looks like this:
# * Snapshot is freed *
#
# Snapshot commands:
# echo 0 > snapshot : Clears and frees snapshot buffer
# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
# Takes a snapshot of the main buffer.
# echo 2 > snapshot : Clears snapshot buffer (but does not allocate)
# (Doesn't have to be '2' works with any number that
# is not a '0' or '1')
Echo 2 says that it does not allocate the buffer, which is correct,
but to be more consistent with "echo 0" it should also state
that it does not free.
Link: http://lkml.kernel.org/r/20130914045916.GA4243@udknight
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
are still in flux, and will have to wait for 3.13.
The changes for 3.12 are mostly clean ups and minor fixes.
H. Peter Anvin added a check to x86_32 static function tracing that
helps a small segment of the kernel community.
Oleg Nesterov had a few changes from 3.11, but were mostly clean ups
and not worth pushing in the -rc time frame.
Li Zefan had small clean up with annotating a raw_init with __init.
I fixed a slight race in updating function callbacks, but the race
is so small and the bug that happens when it occurs is so minor it's
not even worth pushing to stable.
The only real enhancement is from Alexander Z Lam that made the
tracing_cpumask work for trace buffer instances, instead of them all
sharing a global cpumask.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSLJm1AAoJEOdOSU1xswtMSu0H/0/Uuh0D5VhANZRcTATY4gUO
n3WH6sm3atOxH+cbeYQcFXxOcvRcR2n90tvCMpiFlPiC0NiNR1yjro3VLS4zWb77
twq7gABdJf+Tdq7sOBmSzmY5vRKQVHIXvAfC27mBez38nCWZz0BjJGEsPBwoly25
ZaiCbKlusw/QKIEy40tuKUL/rXF6yEWnQrMujhBbyNm0w7sJVdfnd+HHmCvy15H2
IQE1g83d/dAMBjFY2BYg77J+oV6qmJxql2itvDivQWXHqFb52Jw3ZTwHwWLZlPYU
AZcHtYGs2lSUscQLF56LejB7zZyE8taUufExFEVexXxZS5u7nNPXsPrA2LOOK70=
=JWO6
-----END PGP SIGNATURE-----
Merge tag 'trace-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Not much changes for the 3.12 merge window. The major tracing changes
are still in flux, and will have to wait for 3.13.
The changes for 3.12 are mostly clean ups and minor fixes.
H Peter Anvin added a check to x86_32 static function tracing that
helps a small segment of the kernel community.
Oleg Nesterov had a few changes from 3.11, but were mostly clean ups
and not worth pushing in the -rc time frame.
Li Zefan had small clean up with annotating a raw_init with __init.
I fixed a slight race in updating function callbacks, but the race is
so small and the bug that happens when it occurs is so minor it's not
even worth pushing to stable.
The only real enhancement is from Alexander Z Lam that made the
tracing_cpumask work for trace buffer instances, instead of them all
sharing a global cpumask"
* tag 'trace-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace/rcu: Do not trace debug_lockdep_rcu_enabled()
x86-32, ftrace: Fix static ftrace when early microcode is enabled
ftrace: Fix a slight race in modifying what function callback gets traced
tracing: Make tracing_cpumask available for all instances
tracing: Kill the !CONFIG_MODULES code in trace_events.c
tracing: Don't pass file_operations array to event_create_dir()
tracing: Kill trace_create_file_ops() and friends
tracing/syscalls: Annotate raw_init function with __init
There's a slight race when going from a list function to a non list
function. That is, when only one callback is registered to the function
tracer, it gets called directly by the mcount trampoline. But if this
function has filters, it may be called by the wrong functions.
As the list ops callback that handles multiple callbacks that are
registered to ftrace, it also handles what functions they call. While
the transaction is taking place, use the list function always, and
after all the updates are finished (only the functions that should be
traced are being traced), then we can update the trampoline to call
the function directly.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull RCU updates from Paul E. McKenney:
"
* Update RCU documentation. These were posted to LKML at
https://lkml.org/lkml/2013/8/19/611.
* Miscellaneous fixes. These were posted to LKML at
https://lkml.org/lkml/2013/8/19/619.
* Full-system idle detection. This is for use by Frederic
Weisbecker's adaptive-ticks mechanism. Its purpose is
to allow the timekeeping CPU to shut off its tick when
all other CPUs are idle. These were posted to LKML at
https://lkml.org/lkml/2013/8/19/648.
* Improve rcutorture test coverage. These were posted to LKML at
https://lkml.org/lkml/2013/8/19/675.
"
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Allow tracer instances to disable tracing by cpu by moving
the static global tracing_cpumask into trace_array.
Link: http://lkml.kernel.org/r/921622317f239bfc2283cac2242647801ef584f2.1375980149.git.azl@google.com
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Signed-off-by: Alexander Z Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move trace_module_nb under CONFIG_MODULES and kill the dummy
trace_module_notify(). Imho it doesn't make sense to define
"struct notifier_block" and its .notifier_call just to avoid
"ifdef" in event_trace_init(), and all other !CONFIG_MODULES
code has already gone away.
Link: http://lkml.kernel.org/r/20130731173137.GA31043@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that event_create_dir() and __trace_add_new_event() always
use the same file_operations we can kill these arguments and
simplify the code.
Link: http://lkml.kernel.org/r/20130731173135.GA31040@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_create_file_ops() allocates the copy of id/filter/format/enable
file_operations to set "f_op->owner = mod" for fops_get().
However after the recent changes there is no reason to prevent rmmod
even if one of these files is opened. A file operation can do nothing
but fail after remove_event_file_dir() clears ->i_private for every
file removed by trace_module_remove_events().
Kill "struct ftrace_module_file_ops" and fix the compilation errors.
Link: http://lkml.kernel.org/r/20130731173132.GA31033@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
init_syscall_trace() can only be called during kernel bootup only, so we can
mark it and the functions it calls as __init.
Link: http://lkml.kernel.org/r/51528E89.6080508@huawei.com
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fixed two issues with changing the timestamp clock with trace_clock:
- The global buffer was reset on instance clock changes. Change this to pass
the correct per-instance buffer
- ftrace_now() is used to set buf->time_start in tracing_reset_online_cpus().
This was incorrect because ftrace_now() used the global buffer's clock to
return the current time. Change this to use buffer_ftrace_now() which
returns the current time for the correct per-instance buffer.
Also removed tracing_reset_current() because it is not used anywhere
Link: http://lkml.kernel.org/r/1375493777-17261-2-git-send-email-azl@google.com
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Alexander Z Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Releasing the free_buffer file in an instance causes the global buffer
to be stopped when TRACE_ITER_STOP_ON_FREE is enabled. Operate on the
correct buffer.
Link: http://lkml.kernel.org/r/1375493777-17261-1-git-send-email-azl@google.com
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Alexander Z Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_read_pipe zeros all fields bellow "seq". The declaration contains
a comment about that, but it doesn't help.
The first field is "snapshot", it's true when current open file is
snapshot. Looks obvious, that it should not be zeroed.
The second field is "started". It was converted from cpumask_t to
cpumask_var_t (v2.6.28-4983-g4462344), in other words it was
converted from cpumask to pointer on cpumask.
Currently the reference on "started" memory is lost after the first read
from tracing_read_pipe and a proper object will never be freed.
The "started" is never dereferenced for trace_pipe, because trace_pipe
can't have the TRACE_FILE_ANNOTATE options.
Link: http://lkml.kernel.org/r/1375463803-3085183-1-git-send-email-avagin@openvz.org
Cc: stable@vger.kernel.org # 2.6.30
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Uprobes suffer the same problem that kprobes have. There's a race between
writing to the "enable" file and removing the probe. The probe checks for
it being in use and if it is not, goes about deleting the probe and the
event that represents it. But the problem with that is, after it checks
if it is in use it can be enabled, and the deletion of the event (access
to the probe) will fail, as it is in use. But the uprobe will still be
deleted. This is a problem as the event can reference the uprobe that
was deleted.
The fix is to remove the event first, and check to make sure the event
removal succeeds. Then it is safe to remove the probe.
When the event exists, either ftrace or perf can enable the probe and
prevent the event from being removed.
Link: http://lkml.kernel.org/r/20130704034038.991525256@goodmis.org
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a probe is being removed, it cleans up the event files that correspond
to the probe. But there is a race between writing to one of these files
and deleting the probe. This is especially true for the "enable" file.
CPU 0 CPU 1
----- -----
fd = open("enable",O_WRONLY);
probes_open()
release_all_trace_probes()
unregister_trace_probe()
if (trace_probe_is_enabled(tp))
return -EBUSY
write(fd, "1", 1)
__ftrace_set_clr_event()
call->class->reg()
(kprobe_register)
enable_trace_probe(tp)
__unregister_trace_probe(tp);
list_del(&tp->list)
unregister_probe_event(tp) <-- fails!
free_trace_probe(tp)
write(fd, "0", 1)
__ftrace_set_clr_event()
call->class->unreg
(kprobe_register)
disable_trace_probe(tp) <-- BOOM!
A test program was written that used two threads to simulate the
above scenario adding a nanosleep() interval to change the timings
and after several thousand runs, it was able to trigger this bug
and crash:
BUG: unable to handle kernel paging request at 00000005000000f9
IP: [<ffffffff810dee70>] probes_open+0x3b/0xa7
PGD 7808a067 PUD 0
Oops: 0000 [#1] PREEMPT SMP
Dumping ftrace buffer:
---------------------------------
Modules linked in: ipt_MASQUERADE sunrpc ip6t_REJECT nf_conntrack_ipv6
CPU: 1 PID: 2070 Comm: test-kprobe-rem Not tainted 3.11.0-rc3-test+ #47
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
task: ffff880077756440 ti: ffff880076e52000 task.ti: ffff880076e52000
RIP: 0010:[<ffffffff810dee70>] [<ffffffff810dee70>] probes_open+0x3b/0xa7
RSP: 0018:ffff880076e53c38 EFLAGS: 00010203
RAX: 0000000500000001 RBX: ffff88007844f440 RCX: 0000000000000003
RDX: 0000000000000003 RSI: 0000000000000003 RDI: ffff880076e52000
RBP: ffff880076e53c58 R08: ffff880076e53bd8 R09: 0000000000000000
R10: ffff880077756440 R11: 0000000000000006 R12: ffffffff810dee35
R13: ffff880079250418 R14: 0000000000000000 R15: ffff88007844f450
FS: 00007f87a276f700(0000) GS:ffff88007d480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000005000000f9 CR3: 0000000077262000 CR4: 00000000000007e0
Stack:
ffff880076e53c58 ffffffff81219ea0 ffff88007844f440 ffffffff810dee35
ffff880076e53ca8 ffffffff81130f78 ffff8800772986c0 ffff8800796f93a0
ffffffff81d1b5d8 ffff880076e53e04 0000000000000000 ffff88007844f440
Call Trace:
[<ffffffff81219ea0>] ? security_file_open+0x2c/0x30
[<ffffffff810dee35>] ? unregister_trace_probe+0x4b/0x4b
[<ffffffff81130f78>] do_dentry_open+0x162/0x226
[<ffffffff81131186>] finish_open+0x46/0x54
[<ffffffff8113f30b>] do_last+0x7f6/0x996
[<ffffffff8113cc6f>] ? inode_permission+0x42/0x44
[<ffffffff8113f6dd>] path_openat+0x232/0x496
[<ffffffff8113fc30>] do_filp_open+0x3a/0x8a
[<ffffffff8114ab32>] ? __alloc_fd+0x168/0x17a
[<ffffffff81131f4e>] do_sys_open+0x70/0x102
[<ffffffff8108f06e>] ? trace_hardirqs_on_caller+0x160/0x197
[<ffffffff81131ffe>] SyS_open+0x1e/0x20
[<ffffffff81522742>] system_call_fastpath+0x16/0x1b
Code: e5 41 54 53 48 89 f3 48 83 ec 10 48 23 56 78 48 39 c2 75 6c 31 f6 48 c7
RIP [<ffffffff810dee70>] probes_open+0x3b/0xa7
RSP <ffff880076e53c38>
CR2: 00000005000000f9
---[ end trace 35f17d68fc569897 ]---
The unregister_trace_probe() must be done first, and if it fails it must
fail the removal of the kprobe.
Several changes have already been made by Oleg Nesterov and Masami Hiramatsu
to allow moving the unregister_probe_event() before the removal of
the probe and exit the function if it fails. This prevents the tp
structure from being used after it is freed.
Link: http://lkml.kernel.org/r/20130704034038.819592356@goodmis.org
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The "break" used in the do_for_each_event_file() is used as an optimization
as the loop is really a double loop. The loop searches all event files
for each trace_array. There's only one matching event file per trace_array
and after we find the event file for the trace_array, the break is used
to jump to the next trace_array and start the search there.
As this is not a standard way of using "break" in C code, it requires
a comment right before the break to let people know what is going on.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Change trace_remove_event_call(call) to return the error if this
call is active. This is what the callers assume but can't verify
outside of the tracing locks. Both trace_kprobe.c/trace_uprobe.c
need the additional changes, unregister_trace_probe() should abort
if trace_remove_event_call() fails.
The caller is going to free this call/file so we must ensure that
nobody can use them after trace_remove_event_call() succeeds.
debugfs should be fine after the previous changes and event_remove()
does TRACE_REG_UNREGISTER, but still there are 2 reasons why we need
the additional checks:
- There could be a perf_event(s) attached to this tp_event, so the
patch checks ->perf_refcount.
- TRACE_REG_UNREGISTER can be suppressed by FTRACE_EVENT_FL_SOFT_MODE,
so we simply check FTRACE_EVENT_FL_ENABLED protected by event_mutex.
Link: http://lkml.kernel.org/r/20130729175033.GB26284@redhat.com
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's been a nasty bug that would show up and not give much info.
The bug displayed the following warning:
WARNING: at kernel/trace/ftrace.c:1529 __ftrace_hash_rec_update+0x1e3/0x230()
Pid: 20903, comm: bash Tainted: G O 3.6.11+ #38405.trunk
Call Trace:
[<ffffffff8103e5ff>] warn_slowpath_common+0x7f/0xc0
[<ffffffff8103e65a>] warn_slowpath_null+0x1a/0x20
[<ffffffff810c2ee3>] __ftrace_hash_rec_update+0x1e3/0x230
[<ffffffff810c4f28>] ftrace_hash_move+0x28/0x1d0
[<ffffffff811401cc>] ? kfree+0x2c/0x110
[<ffffffff810c68ee>] ftrace_regex_release+0x8e/0x150
[<ffffffff81149f1e>] __fput+0xae/0x220
[<ffffffff8114a09e>] ____fput+0xe/0x10
[<ffffffff8105fa22>] task_work_run+0x72/0x90
[<ffffffff810028ec>] do_notify_resume+0x6c/0xc0
[<ffffffff8126596e>] ? trace_hardirqs_on_thunk+0x3a/0x3c
[<ffffffff815c0f88>] int_signal+0x12/0x17
---[ end trace 793179526ee09b2c ]---
It was finally narrowed down to unloading a module that was being traced.
It was actually more than that. When functions are being traced, there's
a table of all functions that have a ref count of the number of active
tracers attached to that function. When a function trace callback is
registered to a function, the function's record ref count is incremented.
When it is unregistered, the function's record ref count is decremented.
If an inconsistency is detected (ref count goes below zero) the above
warning is shown and the function tracing is permanently disabled until
reboot.
The ftrace callback ops holds a hash of functions that it filters on
(and/or filters off). If the hash is empty, the default means to filter
all functions (for the filter_hash) or to disable no functions (for the
notrace_hash).
When a module is unloaded, it frees the function records that represent
the module functions. These records exist on their own pages, that is
function records for one module will not exist on the same page as
function records for other modules or even the core kernel.
Now when a module unloads, the records that represents its functions are
freed. When the module is loaded again, the records are recreated with
a default ref count of zero (unless there's a callback that traces all
functions, then they will also be traced, and the ref count will be
incremented).
The problem is that if an ftrace callback hash includes functions of the
module being unloaded, those hash entries will not be removed. If the
module is reloaded in the same location, the hash entries still point
to the functions of the module but the module's ref counts do not reflect
that.
With the help of Steve and Joern, we found a reproducer:
Using uinput module and uinput_release function.
cd /sys/kernel/debug/tracing
modprobe uinput
echo uinput_release > set_ftrace_filter
echo function > current_tracer
rmmod uinput
modprobe uinput
# check /proc/modules to see if loaded in same addr, otherwise try again
echo nop > current_tracer
[BOOM]
The above loads the uinput module, which creates a table of functions that
can be traced within the module.
We add uinput_release to the filter_hash to trace just that function.
Enable function tracincg, which increments the ref count of the record
associated to uinput_release.
Remove uinput, which frees the records including the one that represents
uinput_release.
Load the uinput module again (and make sure it's at the same address).
This recreates the function records all with a ref count of zero,
including uinput_release.
Disable function tracing, which will decrement the ref count for uinput_release
which is now zero because of the module removal and reload, and we have
a mismatch (below zero ref count).
The solution is to check all currently tracing ftrace callbacks to see if any
are tracing any of the module's functions when a module is loaded (it already does
that with callbacks that trace all functions). If a callback happens to have
a module function being traced, it increments that records ref count and starts
tracing that function.
There may be a strange side effect with this, where tracing module functions
on unload and then reloading a new module may have that new module's functions
being traced. This may be something that confuses the user, but it's not
a big deal. Another approach is to disable all callback hashes on module unload,
but this leaves some ftrace callbacks that may not be registered, but can
still have hashes tracing the module's function where ftrace doesn't know about
it. That situation can cause the same bug. This solution solves that case too.
Another benefit of this solution, is it is possible to trace a module's
function on unload and load.
Link: http://lkml.kernel.org/r/20130705142629.GA325@redhat.com
Reported-by: Jörn Engel <joern@logfs.org>
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Steve Hodgson <steve@purestorage.com>
Tested-by: Steve Hodgson <steve@purestorage.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When ftrace ops modifies the functions that it will trace, the update
to the function mcount callers may need to be modified. Consolidate
the two places that do the checks to see if an update is required
with a wrapper function for those checks.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Change remove_event_file_dir() to clear ->i_private for every
file we are going to remove.
We need to check file->dir != NULL because event_create_dir()
can fail. debugfs_remove_recursive(NULL) is fine but the patch
moves it under the same check anyway for readability.
spin_lock(d_lock) and "d_inode != NULL" check are not needed
afaics, but I do not understand this code enough.
tracing_open_generic_file() and tracing_release_generic_file()
can go away, ftrace_enable_fops and ftrace_event_filter_fops()
use tracing_open_generic() but only to check tracing_disabled.
This fixes all races with event_remove() or instance_delete().
f_op->read/write/whatever can never use the freed file/call,
all event/* files were changed to check and use ->i_private
under event_mutex.
Note: this doesn't not fix other problems, event_remove() can
destroy the active ftrace_event_call, we need more changes but
those changes are completely orthogonal.
Link: http://lkml.kernel.org/r/20130728183527.GB16723@redhat.com
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Preparation for the next patch. Extract the common code from
remove_event_from_tracers() and __trace_remove_event_dirs()
into the new helper, remove_event_file_dir().
The patch looks more complicated than it actually is, it also
moves remove_subsystem() up to avoid the forward declaration.
Link: http://lkml.kernel.org/r/20130726172547.GA3629@redhat.com
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_format_open() and trace_format_seq_ops are racy, nothing
protects ftrace_event_call from trace_remove_event_call().
Change f_start() to take event_mutex and verify i_private != NULL,
change f_stop() to drop this lock.
This fixes nothing, but now we can change debugfs_remove("format")
callers to nullify ->i_private and fix the the problem.
Note: the usage of event_mutex is sub-optimal but simple, we can
change this later.
Link: http://lkml.kernel.org/r/20130726172543.GA3622@redhat.com
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
event_filter_read/write() are racy, ftrace_event_call can be already
freed by trace_remove_event_call() callers.
1. Shift mutex_lock(event_mutex) from print/apply_event_filter to
the callers.
2. Change the callers, event_filter_read() and event_filter_write()
to read i_private under this mutex and abort if it is NULL.
This fixes nothing, but now we can change debugfs_remove("filter")
callers to nullify ->i_private and fix the the problem.
Link: http://lkml.kernel.org/r/20130726172540.GA3619@redhat.com
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_open_generic_file() is racy, ftrace_event_file can be
already freed by rmdir or trace_remove_event_call().
Change event_enable_read() and event_disable_read() to read and
verify "file = i_private" under event_mutex.
This fixes nothing, but now we can change debugfs_remove("enable")
callers to nullify ->i_private and fix the the problem.
Link: http://lkml.kernel.org/r/20130726172536.GA3612@redhat.com
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
event_id_read() is racy, ftrace_event_call can be already freed
by trace_remove_event_call() callers.
Change event_create_dir() to pass "data = call->event.type", this
is all event_id_read() needs. ftrace_event_id_fops no longer needs
tracing_open_generic().
We add the new helper, event_file_data(), to read ->i_private, it
will have more users.
Note: currently ACCESS_ONCE() and "id != 0" check are not needed,
but we are going to change event_remove/rmdir to clear ->i_private.
Link: http://lkml.kernel.org/r/20130726172532.GA3605@redhat.com
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are several tracepoints (mostly in RCU), that reference a string
pointer and uses the print format of "%s" to display the string that
exists in the kernel, instead of copying the actual string to the
ring buffer (saves time and ring buffer space).
But this has an issue with userspace tools that read the binary buffers
that has the address of the string but has no access to what the string
itself is. The end result is just output that looks like:
rcu_dyntick: ffffffff818adeaa 1 0
rcu_dyntick: ffffffff818adeb5 0 140000000000000
rcu_dyntick: ffffffff818adeb5 0 140000000000000
rcu_utilization: ffffffff8184333b
rcu_utilization: ffffffff8184333b
The above is pretty useless when read by the userspace tools. Ideally
we would want something that looks like this:
rcu_dyntick: Start 1 0
rcu_dyntick: End 0 140000000000000
rcu_dyntick: Start 140000000000000 0
rcu_callback: rcu_preempt rhp=0xffff880037aff710 func=put_cred_rcu 0/4
rcu_callback: rcu_preempt rhp=0xffff880078961980 func=file_free_rcu 0/5
rcu_dyntick: End 0 1
The trace_printk() which also only stores the address of the string
format instead of recording the string into the buffer itself, exports
the mapping of kernel addresses to format strings via the printk_format
file in the debugfs tracing directory.
The tracepoint strings can use this same method and output the format
to the same file and the userspace tools will be able to decipher
the address without any modification.
The tracepoint strings need its own section to save the strings because
the trace_printk section will cause the trace_printk() buffers to be
allocated if anything exists within the section. trace_printk() is only
used for debugging and should never exist in the kernel, we can not use
the trace_printk sections.
Add a new tracepoint_str section that will also be examined by the output
of the printk_format file.
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit a82274151a "tracing: Protect ftrace_trace_arrays list in trace_events.c"
added taking the trace_types_lock mutex in trace_events.c as there were
several locations that needed it for protection. Unfortunately, it also
encapsulated a call to tracing_reset_all_online_cpus() which also takes
the trace_types_lock, causing a deadlock.
This happens when a module has tracepoints and has been traced. When the
module is removed, the trace events module notifier will grab the
trace_types_lock, do a bunch of clean ups, and also clears the buffer
by calling tracing_reset_all_online_cpus. This doesn't happen often
which explains why it wasn't caught right away.
Commit a82274151a was marked for stable, which means this must be
sent to stable too.
Link: http://lkml.kernel.org/r/51EEC646.7070306@broadcom.com
Reported-by: Arend van Spril <arend@broadcom.com>
Tested-by: Arend van Spriel <arend@broadcom.com>
Cc: Alexander Z Lam <azl@google.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If a ftrace ops is registered with the SAVE_REGS flag set, and there's
already a ops registered to one of its functions but without the
SAVE_REGS flag, there's a small race window where the SAVE_REGS ops gets
added to the list of callbacks to call for that function before the
callback trampoline gets set to save the regs.
The problem is, the function is not currently saving regs, which opens
a small race window where the ops that is expecting regs to be passed
to it, wont. This can cause a crash if the callback were to reference
the regs, as the SAVE_REGS guarantees that regs will be set.
To fix this, we add a check in the loop case where it checks if the ops
has the SAVE_REGS flag set, and if so, it will ignore it if regs is
not set.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
After the previous changes trace_array_cpu->trace_cpu and
trace_array->trace_cpu becomes write-only. Remove these members
and kill "struct trace_cpu" as well.
As a side effect this also removes memset(per_cpu_memory, 0).
It was not needed, alloc_percpu() returns zero-filled memory.
Link: http://lkml.kernel.org/r/20130723152613.GA23741@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_open() and tracing_snapshot_open() are racy, the memory
inode->i_private points to can be already freed.
Convert these last users of "inode->i_private == trace_cpu" to
use "i_private = trace_array" and rely on tracing_get_cpu().
v2: incorporate the fix from Steven, tracing_release() must not
blindly dereference file->private_data unless we know that
the file was opened for reading.
Link: http://lkml.kernel.org/r/20130723152610.GA23737@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_open_generic_tc() is racy, the memory inode->i_private
points to can be already freed.
1. Change its last user, tracing_entries_fops, to use
tracing_*_generic_tr() instead.
2. Change debugfs_create_file("buffer_size_kb", data) callers
to pass "data = tr".
3. Change tracing_entries_read() and tracing_entries_write() to
use tracing_get_cpu().
4. Kill the no longer used tracing_open_generic_tc() and
tracing_release_generic_tc().
Link: http://lkml.kernel.org/r/20130723152606.GA23730@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_open_generic_tc() is racy, the memory inode->i_private
points to can be already freed.
1. Change one of its users, tracing_stats_fops, to use
tracing_*_generic_tr() instead.
2. Change trace_create_cpu_file("stats", data) to pass "data = tr".
3. Change tracing_stats_read() to use tracing_get_cpu().
Link: http://lkml.kernel.org/r/20130723152603.GA23727@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_buffers_open() is racy, the memory inode->i_private points
to can be already freed.
Change debugfs_create_file("trace_pipe_raw", data) caller to pass
"data = tr", tracing_buffers_open() can use tracing_get_cpu().
Change debugfs_create_file("snapshot_raw_fops", data) caller too,
this file uses tracing_buffers_open/release.
Link: http://lkml.kernel.org/r/20130723152600.GA23720@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_open_pipe() is racy, the memory inode->i_private points to
can be already freed.
Change debugfs_create_file("trace_pipe", data) callers to to pass
"data = tr", tracing_open_pipe() can use tracing_get_cpu().
Link: http://lkml.kernel.org/r/20130723152557.GA23717@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every "file_operations" used by tracing_init_debugfs_percpu is buggy.
f_op->open/etc does:
1. struct trace_cpu *tc = inode->i_private;
struct trace_array *tr = tc->tr;
2. trace_array_get(tr) or fail;
3. do_something(tc);
But tc (and tr) can be already freed before trace_array_get() is called.
And it doesn't matter whether this file is per-cpu or it was created by
init_tracer_debugfs(), free_percpu() or kfree() are equally bad.
Note that even 1. is not safe, the freed memory can be unmapped. But even
if it was safe trace_array_get() can wrongly succeed if we also race with
the next new_instance_create() which can re-allocate the same tr, or tc
was overwritten and ->tr points to the valid tr. In this case 3. uses the
freed/reused memory.
Add the new trivial helper, trace_create_cpu_file() which simply calls
trace_create_file() and encodes "cpu" in "struct inode". Another helper,
tracing_get_cpu() will be used to read cpu_nr-or-RING_BUFFER_ALL_CPUS.
The patch abuses ->i_cdev to encode the number, it is never used unless
the file is S_ISCHR(). But we could use something else, say, i_bytes or
even ->d_fsdata. In any case this hack is hidden inside these 2 helpers,
it would be trivial to change them if needed.
This patch only changes tracing_init_debugfs_percpu() to use the new
trace_create_cpu_file(), the next patches will change file_operations.
Note: tracing_get_cpu(inode) is always safe but you can't trust the
result unless trace_array_get() was called, without trace_types_lock
which acts as a barrier it can wrongly return RING_BUFFER_ALL_CPUS.
Link: http://lkml.kernel.org/r/20130723152554.GA23710@redhat.com
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_buffers_open() does trace_array_get() and then it wrongly
inrcements tr->ref again under trace_types_lock. This means that
every caller leaks trace_array:
# cd /sys/kernel/debug/tracing/
# mkdir instances/X
# true < instances/X/per_cpu/cpu0/trace_pipe_raw
# rmdir instances/X
rmdir: failed to remove `instances/X': Device or resource busy
Link: http://lkml.kernel.org/r/20130719153644.GA18899@redhat.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Trivial. trace_array->waiter has no users since 6eaaa5d5
"tracing/core: use appropriate waiting on trace_pipe".
Link: http://lkml.kernel.org/r/20130719142036.GA1594@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
event_id_read() has no reason to kmalloc "struct trace_seq"
(more than PAGE_SIZE!), it can use a small buffer instead.
Note: "if (*ppos) return 0" looks strange and even wrong,
simple_read_from_buffer() handles ppos != 0 case corrrectly.
And it seems that almost every user of trace_seq in this file
should be converted too. Unless you use seq_open(), trace_seq
buys nothing compared to the raw buffer, but it needs a bit
more memory and code.
Link: http://lkml.kernel.org/r/20130718184712.GA4786@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
f_next() looks overcomplicated, and it is not strictly correct
even if this doesn't matter.
Say, FORMAT_FIELD_SEPERATOR should not return NULL (means EOF)
if trace_get_fields() returns an empty list, we should simply
advance to FORMAT_PRINTFMT as we do when we find the end of list.
1. Change f_next() to return "struct list_head *" rather than
"ftrace_event_field *", and change f_show() to do list_entry().
This simplifies the code a bit, only f_show() needs to know
about ftrace_event_field, and f_next() can play with ->prev
directly
2. Change f_next() to not play with ->prev / return inside the
switch() statement. It can simply set node = head/common_head,
the prev-or-advance-to-the-next-magic below does all work.
While at it. f_start() looks overcomplicated too. I don't think
*pos == 0 makes sense as a separate case, just change this code
to do "while" instead of "do/while".
The patch also moves f_start() down, close to f_stop(). This is
purely cosmetic, just to make the locking added by the next patch
more clear/visible.
Link: http://lkml.kernel.org/r/20130718184710.GA4783@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The selftest for function and function graph tracers are defined as
__init, as they are only executed at boot up. The "tracer" structs
that are associated to those tracers are not setup as __init as they
are used after boot. To stop mismatch warnings, those structures
need to be annotated with __ref_data.
Currently, the tracer structures are defined to __read_mostly, as they
do not really change. But in the future they should be converted to
consts, but that will take a little work because they have a "next"
pointer that gets updated when they are registered. That will have to
wait till the next major release.
Link: http://lkml.kernel.org/r/1373596735.17876.84.camel@gandalf.local.home
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some error paths did not handle ref counting properly, and some trace files need
ref counting.
Link: http://lkml.kernel.org/r/1374171524-11948-1-git-send-email-azl@google.com
Cc: stable@vger.kernel.org # 3.10
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Signed-off-by: Alexander Z Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove debugfs directories for tracing instances during creation if an error
occurs causing the trace_array for that instance to not be added to
ftrace_trace_arrays. If the directory continues to exist after the error, it
cannot be removed because the respective trace_array is not in
ftrace_trace_arrays.
Link: http://lkml.kernel.org/r/1373502874-1706-2-git-send-email-azl@google.com
Cc: stable@vger.kernel.org # 3.10
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Signed-off-by: Alexander Z Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Wait for disabling all running kprobe handlers when a kprobe
event is disabled, since the caller, trace_remove_event_call()
supposes that a removing event is disabled completely by
disabling the event.
With this change, ftrace can ensure that there is no running
event handlers after disabling it.
Link: http://lkml.kernel.org/r/20130709093526.20138.93100.stgit@mhiramat-M0-7522
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every perf_trace_buf_prepare() caller does
WARN_ONCE(size > PERF_MAX_TRACE_SIZE, message) and "message" is
almost the same.
Shift this WARN_ONCE() into perf_trace_buf_prepare(). This changes
the meaning of _ONCE, but I think this is fine.
- 4947014 2932448 10104832 17984294 1126b26 vmlinux
+ 4948422 2932448 10104832 17985702 11270a6 vmlinux
on my build.
Link: http://lkml.kernel.org/r/20130617170211.GA19813@redhat.com
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
perf_trace_buf_prepare() + perf_trace_buf_submit(head, task => NULL)
make no sense if hlist_empty(head). Change perf_syscall_enter/exit()
to check sys_data->{enter,exit}_event->perf_events beforehand.
Link: http://lkml.kernel.org/r/20130617170207.GA19806@redhat.com
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
perf_trace_buf_prepare() + perf_trace_buf_submit(head, task => NULL)
make no sense if hlist_empty(head). Change perf_ftrace_function_call()
to check event_function.perf_events beforehand.
Link: http://lkml.kernel.org/r/20130617170204.GA19803@redhat.com
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There have some mismatch between comments with
real function name, update it.
This patch also add some missed function arguments
description.
Link: http://lkml.kernel.org/r/51E3B3B2.4080307@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For string without format specifiers, use trace_seq_puts()
or trace_seq_putc().
Link: http://lkml.kernel.org/r/51E3B3AC.1000605@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
[ fixed a trace_seq_putc(s, " ") to trace_seq_putc(s, ' ') ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We should use CONFIG_STACK_TRACER to guard readme text
of stack tracer related file, not CONFIG_STACKTRACE.
Link: http://lkml.kernel.org/r/51E3B3A2.8080609@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
were added to 3.10, which includes several bug fixes that have been
marked for stable.
As for new features, there were a few, but nothing to write to LWN about.
These include:
New function trigger called "dump" and "cpudump" that will cause
ftrace to dump its buffer to the console when the function is called.
The difference between "dump" and "cpudump" is that "dump" will dump
the entire contents of the ftrace buffer, where as "cpudump" will only
dump the contents of the ftrace buffer for the CPU that called the function.
Another small enhancement is a new sysctl switch called "traceoff_on_warning"
which, when enabled, will disable tracing if any WARN_ON() is triggered.
This is useful if you want to debug what caused a warning and do not
want to risk losing your trace data by the ring buffer overwriting the
data before you can disable it. There's also a kernel command line
option that will make this enabled at boot up called the same thing.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJR1uF2AAoJEOdOSU1xswtMJ1IH/2LSiZAKTA2QaRgGQC/5Bb9c
XSOI1HfD/78lmUvTyb0AX8sLpkzZlvIONEQ/WaZUFo1Zjbrl45zJUwMkTE9uImEg
ZqI5x8OiiN6j4XrRbfYn3Ti060H/Jq41pZXa+shh961Vv51ilv/1yyLkoRmnjzuO
JTloPdXDV7icOqqiSdgxSdtUSv59Ef1ZdHgvvsb3aqzMC5btVQPi4kIys0ST1Tr1
pMWBY+UgvH0xYm3gvTR+W6jjDlkVZEH2alkmcinfr+uC1tm9DDqK2HA17Pd5yZ5z
HNdT76lCzf9iqRF5F8HUvUt+PIp76dNNxAt2qpB6APqAuJTojyguxXHDbY/0kzs=
=UvLi
-----END PGP SIGNATURE-----
Merge tag 'trace-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing changes from Steven Rostedt:
"The majority of the changes here are cleanups for the large changes
that were added to 3.10, which includes several bug fixes that have
been marked for stable.
As for new features, there were a few, but nothing to write to LWN
about. These include:
New function trigger called "dump" and "cpudump" that will cause
ftrace to dump its buffer to the console when the function is called.
The difference between "dump" and "cpudump" is that "dump" will dump
the entire contents of the ftrace buffer, where as "cpudump" will only
dump the contents of the ftrace buffer for the CPU that called the
function.
Another small enhancement is a new sysctl switch called
"traceoff_on_warning" which, when enabled, will disable tracing if any
WARN_ON() is triggered. This is useful if you want to debug what
caused a warning and do not want to risk losing your trace data by the
ring buffer overwriting the data before you can disable it. There's
also a kernel command line option that will make this enabled at boot
up called the same thing"
* tag 'trace-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (34 commits)
tracing: Make tracing_open_generic_{tr,tc}() static
tracing: Remove ftrace() function
tracing: Remove TRACE_EVENT_TYPE enum definition
tracing: Make tracer_tracing_{off,on,is_on}() static
tracing: Fix irqs-off tag display in syscall tracing
uprobes: Fix return value in error handling path
tracing: Fix race between deleting buffer and setting events
tracing: Add trace_array_get/put() to event handling
tracing: Get trace_array ref counts when accessing trace files
tracing: Add trace_array_get/put() to handle instance refs better
tracing: Protect ftrace_trace_arrays list in trace_events.c
tracing: Make trace_marker use the correct per-instance buffer
ftrace: Do not run selftest if command line parameter is set
tracing/kprobes: Don't pass addr=ip to perf_trace_buf_submit()
tracing: Use flag buffer_disabled for irqsoff tracer
tracing/kprobes: Turn trace_probe->files into list_head
tracing: Fix disabling of soft disable
tracing: Add missing syscall_metadata comment
tracing: Simplify code for showing of soft disabled flag
tracing/kprobes: Kill probe_enable_lock
...
I have patches that will use tracing_open_generic_tr/tc() in other
files, but as they are not ready to be merged yet, and Fengguang Wu's
sparse scripts pointed out that these functions were not declared
anywhere, I'll make them static for now.
When these functions are required to be used elsewhere, I'll remove
the static then.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I have patches that will use tracer_tracing_on/off/is_on() in other
files, but as they are not ready to be merged yet, and Fengguang Wu's
sparse scripts pointed out that these functions were not declared
anywhere, I'll make them static for now.
When these functions are required to be used elsewhere, I'll remove
the static then.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
While analyzing the code, I discovered that there's a potential race between
deleting a trace instance and setting events. There are a few races that can
occur if events are being traced as the buffer is being deleted. Mostly the
problem comes with freeing the descriptor used by the trace event callback.
To prevent problems like this, the events are disabled before the buffer is
deleted. The problem with the current solution is that the event_mutex is let
go between disabling the events and freeing the files, which means that the events
could be enabled again while the freeing takes place.
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit a695cb5816 "tracing: Prevent deleting instances when they are being read"
tried to fix a race between deleting a trace instance and reading contents
of a trace file. But it wasn't good enough. The following could crash the kernel:
# cd /sys/kernel/debug/tracing/instances
# ( while :; do mkdir foo; rmdir foo; done ) &
# ( while :; do echo 1 > foo/events/sched/sched_switch 2> /dev/null; done ) &
Luckily this can only be done by root user, but it should be fixed regardless.
The problem is that a delete of the file can happen after the write to the event
is opened, but before the enabling happens.
The solution is to make sure the trace_array is available before succeeding in
opening for write, and incerment the ref counter while opened.
Now the instance can be deleted when the events are writing to the buffer,
but the deletion of the instance will disable all events before the instance
is actually deleted.
Cc: stable@vger.kernel.org # 3.10
Reported-by: Alexander Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a trace file is opened that may access a trace array, it must
increment its ref count to prevent it from being deleted.
Cc: stable@vger.kernel.org # 3.10
Reported-by: Alexander Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit a695cb5816 "tracing: Prevent deleting instances when they are being read"
tried to fix a race between deleting a trace instance and reading contents
of a trace file. But it wasn't good enough. The following could crash the kernel:
# cd /sys/kernel/debug/tracing/instances
# ( while :; do mkdir foo; rmdir foo; done ) &
# ( while :; do cat foo/trace &> /dev/null; done ) &
Luckily this can only be done by root user, but it should be fixed regardless.
The problem is that a delete of the file can happen after the reader starts
to open the file but before it grabs the trace_types_mutex.
The solution is to validate the trace array before using it. If the trace
array does not exist in the list of trace arrays, then it returns -ENODEV.
There's a possibility that a trace_array could be deleted and a new one
created and the open would open its file instead. But that is very minor as
it will just return the data of the new trace array, it may confuse the user
but it will not crash the system. As this can only be done by root anyway,
the race will only occur if root is deleting what its trying to read at
the same time.
Cc: stable@vger.kernel.org # 3.10
Reported-by: Alexander Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are multiple places where the ftrace_trace_arrays list is accessed in
trace_events.c without the trace_types_lock held.
Link: http://lkml.kernel.org/r/1372732674-22726-1-git-send-email-azl@google.com
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Alexander Z Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_marker file was present for each new instance created, but it
added the trace mark to the global trace buffer instead of to
the instance's buffer.
Link: http://lkml.kernel.org/r/1372717885-4543-2-git-send-email-azl@google.com
Cc: David Sharp <dhsharp@google.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Alexander Z Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the kernel command line ftrace filter parameters are set
(ftrace_filter or ftrace_notrace), force the function self test to
pass, with a warning why it was forced.
If the user adds a filter to the kernel command line, it is assumed
that they know what they are doing, and the self test should just not
run instead of failing (which disables function tracing) or clearing
the filter, as that will probably annoy the user.
If the user wants the selftest to run, the message will tell them why
it did not.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
kprobe_perf_func() and kretprobe_perf_func() pass addr=ip to
perf_trace_buf_submit() for no reason.
This sets perf_sample_data->addr for PERF_SAMPLE_ADDR, we already
have perf_sample_data->ip initialized if PERF_SAMPLE_IP.
Link: http://lkml.kernel.org/r/20130620173811.GA13161@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the ring buffer is disabled and the irqsoff tracer records a trace it
will clear out its buffer and lose the data it had previously recorded.
Currently there's a callback when writing to the tracing_of file, but if
tracing is disabled via the function tracer trigger, it will not inform
the irqsoff tracer to stop recording.
By using the "mirror" flag (buffer_disabled) in the trace_array, that keeps
track of the status of the trace_array's buffer, it gives the irqsoff
tracer a fast way to know if it should record a new trace or not.
The flag may be a little behind the real state of the buffer, but it
should not affect the trace too much. It's more important for the irqsoff
tracer to be fast.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I think that "ftrace_event_file *trace_probe[]" complicates the
code for no reason, turn it into list_head to simplify the code.
enable_trace_probe() no longer needs synchronize_sched().
This needs the extra sizeof(list_head) memory for every attached
ftrace_event_file, hopefully not a problem in this case.
Link: http://lkml.kernel.org/r/20130620173814.GA13165@redhat.com
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The comment on the soft disable 'disable' case of
__ftrace_event_enable_disable() states that the soft disable bit
should be cleared in that case, but currently only the soft mode bit
is actually cleared.
This essentially leaves the standard non-soft-enable enable/disable
paths as the only way to clear the soft disable flag, but the soft
disable bit should also be cleared when removing a trigger with '!'.
Also, the SOFT_DISABLED bit should never be set if SOFT_MODE is
cleared.
This fixes the above discrepancies.
Link: http://lkml.kernel.org/r/b9c68dd50bc07019e6c67d3f9b29be4ef1b2badb.1372479499.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
enable_trace_probe() and disable_trace_probe() should not worry about
serialization, the caller (perf_trace_init or __ftrace_set_clr_event)
holds event_mutex.
They are also called by kprobe_trace_self_tests_init(), but this __init
function can't race with itself or trace_events.c
And note that this code depended on event_mutex even before 41a7dd420c
which introduced probe_enable_lock. In fact it assumes that the caller
kprobe_register() can never race with itself. Otherwise, say, tp->flags
manipulations are racy.
Link: http://lkml.kernel.org/r/20130620173809.GA13158@redhat.com
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
perf_trace_buf_prepare() + perf_trace_buf_submit() make no sense
if this task/CPU has no active counters. Change kprobe_perf_func()
and kretprobe_perf_func() to check call->perf_events beforehand
and return if this list is empty.
For example, "perf record -e some_probe -p1". Only /sbin/init will
report, all other threads which hit the same probe will do
perf_trace_buf_prepare/perf_trace_buf_submit just to realize that
nobody wants perf_swevent_event().
Link: http://lkml.kernel.org/r/20130620173806.GA13151@redhat.com
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Running the following:
# cd /sys/kernel/debug/tracing
# echo p:i do_sys_open > kprobe_events
# echo p:j schedule >> kprobe_events
# cat kprobe_events
p:kprobes/i do_sys_open
p:kprobes/j schedule
# echo p:i do_sys_open >> kprobe_events
# cat kprobe_events
p:kprobes/j schedule
p:kprobes/i do_sys_open
# ls /sys/kernel/debug/tracing/events/kprobes/
enable filter j
Notice that the 'i' is missing from the kprobes directory.
The console produces:
"Failed to create system directory kprobes"
This is because kprobes passes in a allocated name for the system
and the ftrace event subsystem saves off that name instead of creating
a duplicate for it. But the kprobes may free the system name making
the pointer to it invalid.
This bug was introduced by 92edca073c "tracing: Use direct field, type
and system names" which switched from using kstrdup() on the system name
in favor of just keeping apointer to it, as the internal ftrace event
system names are static and exist for the life of the computer being booted.
Instead of reverting back to duplicating system names again, we can use
core_kernel_data() to determine if the passed in name was allocated or
static. Then use the MSB of the ref_count to be a flag to keep track if
the name was allocated or not. Then we can still save from having to duplicate
strings that will always exist, but still copy the ones that may be freed.
Cc: stable@vger.kernel.org # 3.10
Reported-by: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com>
Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since tp->flags assignment was moved into function enable_trace_probe(),
there is no need to use trace_probe_is_enabled to check flags
in the same function.
Remove the unnecessary checking.
Link: http://lkml.kernel.org/r/51BA7B9E.3040807@huawei.com
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a traceoff_on_warning option in both the kernel command line as well
as a sysctl option. When set, any WARN*() function that is hit will cause
the tracing_on variable to be cleared, which disables writing to the
ring buffer.
This is useful especially when tracing a bug with function tracing. When
a warning is hit, the print caused by the warning can flood the trace with
the functions that producing the output for the warning. This can make the
resulting trace useless by either hiding where the bug happened, or worse,
by overflowing the buffer and losing the trace of the bug totally.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are some cases when filtering on a set flag of a field of a tracepoint
is useful. But currently the only filtering commands for numbered fields
is ==, !=, <, <=, >, >=. This does not help when you just want to trace if
a specific flag is set. For example:
> # sudo trace-cmd record -e brcmfmac:brcmf_dbg -f 'level & 0x40000'
> disable all
> enable brcmfmac:brcmf_dbg
> path = /sys/kernel/debug/tracing/events/brcmfmac/brcmf_dbg/enable
> (level & 0x40000)
> ^
> parse_error: Invalid operator
>
When trying to trace brcmf_dbg when level has its 1 << 18 bit set, the
filter fails to perform.
By allowing a binary '&' operation, this gives the user the ability to
test a bit.
Note, a binary '|' is not added, as it doesn't make sense as fields must
be compared to constants (for now), and ORing a constant will always return
true.
Link: http://lkml.kernel.org/r/1371057385.9844.261.camel@gandalf.local.home
Suggested-by: Arend van Spriel <arend@broadcom.com>
Tested-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracer uses preempt_disable/enable_notrace() for
synchronization between reading registered ftrace_ops and unregistering
them.
Most of the ftrace_ops are global permanent structures that do not
require this synchronization. That is, ops may be added and removed from
the hlist but are never freed, and wont hurt if a synchronization is
missed.
But this is not true for dynamically created ftrace_ops or control_ops,
which are used by the perf function tracing.
The problem here is that the function tracer can be used to trace
kernel/user context switches as well as going to and from idle.
Basically, it can be used to trace blind spots of the RCU subsystem.
This means that even though preempt_disable() is done, a
synchronize_sched() will ignore CPUs that haven't made it out of user
space or idle. These can include functions that are being traced just
before entering or exiting the kernel sections.
To implement the RCU synchronization, instead of using
synchronize_sched() the use of schedule_on_each_cpu() is performed. This
means that when a dynamically allocated ftrace_ops, or a control ops is
being unregistered, all CPUs must be touched and execute a ftrace_sync()
stub function via the work queues. This will rip CPUs out from idle or
in dynamic tick mode. This only happens when a user disables perf
function tracing or other dynamically allocated function tracers, but it
allows us to continue to debug RCU and context tracking with function
tracing.
Link: http://lkml.kernel.org/r/1369785676.15552.55.camel@gandalf.local.home
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 4f271a2a60
(tracing: Add a proc file to stop tracing and free buffer)
implement a method to free up ring buffer in kernel memory
in the release code path of free_buffer's fd.
Then we don't need read/write support for free_buffer,
indeed we just have a dummy write fop, and don't implement read fop.
So the 0200 is more reasonable file mode for free_buffer than
the current file mode 0644.
Link: http://lkml.kernel.org/r/20130526085201.GA3183@udknight
Acked-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Acked-by: David Sharp <dhsharp@google.com>
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the "cpudump" command to have the current CPU ftrace buffer dumped
to console if a function is hit. This is useful when debugging a
tripple fault, where you have an idea of a function that is called
just before the tripple fault occurs, and can tell ftrace to dump its
content out to the console before it continues.
This differs from the "dump" command as it only dumps the content of
the ring buffer for the currently executing CPU, and does not show
the contents of the other CPUs.
Format is:
<function>:cpudump
echo 'bad_address:cpudump' > /debug/tracing/set_ftrace_filter
To remove this:
echo '!bad_address:cpudump' > /debug/tracing/set_ftrace_filter
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the "dump" command to have the ftrace buffer dumped to console if
a function is hit. This is useful when debugging a tripple fault,
where you have an idea of a function that is called just before the
tripple fault occurs, and can tell ftrace to dump its content out
to the console before it continues.
Format is:
<function>:dump
echo 'bad_address:dump' > /debug/tracing/set_ftrace_filter
To remove this:
echo '!bad_address:dump' > /debug/tracing/set_ftrace_filter
Requested-by: Luis Claudio R. Goncalves <lclaudio@uudg.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Outputting formats of x86-tsc and counter should be a raw format, but after
applying the patch(2b6080f28c), the format was
changed to nanosec. This is because the global variable trace_clock_id was used.
When we use multiple buffers, clock_id of each sub-buffer should be used. Then,
this patch uses tr->clock_id instead of the global variable trace_clock_id.
[ Basically, this fixes a regression where the multibuffer code changed the
trace_clock file to update tr->clock_id but the traces still use the old
global trace_clock_id variable, negating the file's effect. The global
trace_clock_id variable is obsolete and removed. - SR ]
Link: http://lkml.kernel.org/r/20130423013239.22334.7394.stgit@yunodevel
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The irqsoff tracer records the max time that interrupts are disabled.
There are hooks in the assembly code that calls back into the tracer when
interrupts are disabled or enabled.
When they are enabled, the tracer checks if the amount of time they
were disabled is larger than the previous recorded max interrupts off
time. If it is, it creates a snapshot of the currently running trace
to store where the last largest interrupts off time was held and how
it happened.
During testing, this RCU lockdep dump appeared:
[ 1257.829021] ===============================
[ 1257.829021] [ INFO: suspicious RCU usage. ]
[ 1257.829021] 3.10.0-rc1-test+ #171 Tainted: G W
[ 1257.829021] -------------------------------
[ 1257.829021] /home/rostedt/work/git/linux-trace.git/include/linux/rcupdate.h:780 rcu_read_lock() used illegally while idle!
[ 1257.829021]
[ 1257.829021] other info that might help us debug this:
[ 1257.829021]
[ 1257.829021]
[ 1257.829021] RCU used illegally from idle CPU!
[ 1257.829021] rcu_scheduler_active = 1, debug_locks = 0
[ 1257.829021] RCU used illegally from extended quiescent state!
[ 1257.829021] 2 locks held by trace-cmd/4831:
[ 1257.829021] #0: (max_trace_lock){......}, at: [<ffffffff810e2b77>] stop_critical_timing+0x1a3/0x209
[ 1257.829021] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff810dae5a>] __update_max_tr+0x88/0x1ee
[ 1257.829021]
[ 1257.829021] stack backtrace:
[ 1257.829021] CPU: 3 PID: 4831 Comm: trace-cmd Tainted: G W 3.10.0-rc1-test+ #171
[ 1257.829021] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
[ 1257.829021] 0000000000000001 ffff880065f49da8 ffffffff8153dd2b ffff880065f49dd8
[ 1257.829021] ffffffff81092a00 ffff88006bd78680 ffff88007add7500 0000000000000003
[ 1257.829021] ffff88006bd78680 ffff880065f49e18 ffffffff810daebf ffffffff810dae5a
[ 1257.829021] Call Trace:
[ 1257.829021] [<ffffffff8153dd2b>] dump_stack+0x19/0x1b
[ 1257.829021] [<ffffffff81092a00>] lockdep_rcu_suspicious+0x109/0x112
[ 1257.829021] [<ffffffff810daebf>] __update_max_tr+0xed/0x1ee
[ 1257.829021] [<ffffffff810dae5a>] ? __update_max_tr+0x88/0x1ee
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810dbf85>] update_max_tr_single+0x11d/0x12d
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810e2b15>] stop_critical_timing+0x141/0x209
[ 1257.829021] [<ffffffff8109569a>] ? trace_hardirqs_on+0xd/0xf
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810e3057>] time_hardirqs_on+0x2a/0x2f
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff8109550c>] trace_hardirqs_on_caller+0x16/0x197
[ 1257.829021] [<ffffffff8109569a>] trace_hardirqs_on+0xd/0xf
[ 1257.829021] [<ffffffff811002b9>] user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810029b4>] do_notify_resume+0x92/0x97
[ 1257.829021] [<ffffffff8154bdca>] int_signal+0x12/0x17
What happened was entering into the user code, the interrupts were enabled
and a max interrupts off was recorded. The trace buffer was saved along with
various information about the task: comm, pid, uid, priority, etc.
The uid is recorded with task_uid(tsk). But this is a macro that uses rcu_read_lock()
to retrieve the data, and this happened to happen where RCU is blind (user_enter).
As only the preempt and irqs off tracers can have this happen, and they both
only have the tsk == current, if tsk == current, use current_uid() instead of
task_uid(), as current_uid() does not use RCU as only current can change its uid.
This fixes the RCU suspicious splat.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The branch selftest calls trace_test_buffer(), but with the new code
it expects the first parameter to be a pointer to a struct trace_buffer.
All self tests were changed but the branch selftest was missed.
This caused either a crash or failed test when the branch selftest was
enabled.
Link: http://lkml.kernel.org/r/20130529141333.GA24064@localhost
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As rcu_dereference_raw() under RCU debug config options can add quite a
bit of checks, and that tracing uses rcu_dereference_raw(), these checks
happen with the function tracer. The function tracer also happens to trace
these debug checks too. This added overhead can livelock the system.
Have the function tracer use the new RCU _notrace equivalents that do
not do the debug checks for RCU.
Link: http://lkml.kernel.org/r/20130528184209.467603904@goodmis.org
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing infrastructure sets up for possible CPUs, but it uses
the ring buffer polling, it is possible to call the ring buffer
polling code with a CPU that hasn't been allocated. This will cause
a kernel oops when it access a ring buffer cpu buffer that is part
of the possible cpus but hasn't been allocated yet as the CPU has never
been online.
Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If ftrace=<tracer> is on the kernel command line, when that tracer is
registered, it will be initiated by tracing_set_tracer() to execute that
tracer.
The nop tracer is just a stub tracer that is used to have no tracer
enabled. It is assigned at early bootup as it is the default tracer.
But if ftrace=nop is on the kernel command line, the registering of the
nop tracer will call tracing_set_tracer() which will try to execute
the nop tracer. But it expects tr->current_trace to be assigned something
as it usually is assigned to the nop tracer. As it hasn't been assigned
to anything yet, it causes the system to crash.
The simple fix is to move the tr->current_trace = nop before registering
the nop tracer. The functionality is still the same as the nop tracer
doesn't do anything anyway.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since try_module_get() returns false( = 0) when it fails to
pindown a module, event_enable_func() returns 0 which means
"succeed". This can cause a kernel panic when the entry
is removed, because the event is already released.
This fixes the bug by returning -EBUSY, because the reason
why it fails is that the module is being removed at that time.
Link: http://lkml.kernel.org/r/20130516114848.13508.97899.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
According to sparse warning, print_*probe_event static because
those functions are not directly called from outside.
Link: http://lkml.kernel.org/r/20130513115839.6545.83067.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use rcu_dereference_raw() for accessing tp->files. Because the
write-side uses rcu_assign_pointer() for memory barrier,
the read-side also has to use rcu_dereference_raw() with
read memory barrier.
Link: http://lkml.kernel.org/r/20130513115834.6545.17022.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Special preds are created when folding a series of preds that
can be done in serial. These are allocated in an ops field of
the pred structure. But they were never freed, causing memory
leaks.
This was discovered using the kmemleak checker:
unreferenced object 0xffff8800797fd5e0 (size 32):
comm "swapper/0", pid 1, jiffies 4294690605 (age 104.608s)
hex dump (first 32 bytes):
00 00 01 00 03 00 05 00 07 00 09 00 0b 00 0d 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff814b52af>] kmemleak_alloc+0x73/0x98
[<ffffffff8111ff84>] kmemleak_alloc_recursive.constprop.42+0x16/0x18
[<ffffffff81120e68>] __kmalloc+0xd7/0x125
[<ffffffff810d47eb>] kcalloc.constprop.24+0x2d/0x2f
[<ffffffff810d4896>] fold_pred_tree_cb+0xa9/0xf4
[<ffffffff810d3781>] walk_pred_tree+0x47/0xcc
[<ffffffff810d5030>] replace_preds.isra.20+0x6f8/0x72f
[<ffffffff810d50b5>] create_filter+0x4e/0x8b
[<ffffffff81b1c30d>] ftrace_test_event_filter+0x5a/0x155
[<ffffffff8100028d>] do_one_initcall+0xa0/0x137
[<ffffffff81afbedf>] kernel_init_freeable+0x14d/0x1dc
[<ffffffff814b24b7>] kernel_init+0xe/0xdb
[<ffffffff814d539c>] ret_from_fork+0x7c/0xb0
[<ffffffffffffffff>] 0xffffffffffffffff
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: stable@vger.kernel.org # 2.6.39+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
kprobes up to par with the latest changes to ftrace (multi buffering
and the new function probes).
He also discovered and fixed some bugs in doing so. When pulling in his
patches, I also found a few minor bugs as well and fixed them.
This also includes a compile fix for some archs that select the ring buffer
but not tracing.
I based this off of the last patch you took from me that fixed the merge
conflict error, as that was the commit that had all the changes I needed
for this set of changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJRjYnJAAoJEOdOSU1xswtMg9EH/iFs438FgrNMk2ZdQftmqcqA
cqcactHo1mmoHjAoLZT/oDBjEThhVUuqzMXrFRutSYcTh4PsQEC3arX0mpsC+T12
UEEV/tZS3TXH+GXEyrOit/O3kzntQcDHwJDV4+0n80IrJmw4IDZbnV3R8DWjS6wp
so+dq0A1pwehcG/upgpw1oTKsGv1G/p6vyf968B6W44icHEClLiph4JE2kzE6D3r
fzSpOLaQoBEvwIRf6xRKxi240VqIItXwfG7pwNpPpSC37gRLzm74zGr+Sj93/k1y
pARbZ/5XO7/pcVYQYupErRAoV5in+QMZ67k5G1vQIvyOS9r039catbQf/7PkzcI=
=EZCE
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing/kprobes update from Steven Rostedt:
"The majority of these changes are from Masami Hiramatsu bringing
kprobes up to par with the latest changes to ftrace (multi buffering
and the new function probes).
He also discovered and fixed some bugs in doing so. When pulling in
his patches, I also found a few minor bugs as well and fixed them.
This also includes a compile fix for some archs that select the ring
buffer but not tracing.
I based this off of the last patch you took from me that fixed the
merge conflict error, as that was the commit that had all the changes
I needed for this set of changes."
* tag 'trace-fixes-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobes: Support soft-mode disabling
tracing/kprobes: Support ftrace_event_file base multibuffer
tracing/kprobes: Pass trace_probe directly from dispatcher
tracing/kprobes: Increment probe hit-count even if it is used by perf
tracing/kprobes: Use bool for retprobe checker
ftrace: Fix function probe when more than one probe is added
ftrace: Fix the output of enabled_functions debug file
ftrace: Fix locking in register_ftrace_function_probe()
tracing: Add helper function trace_create_new_event() to remove duplicate code
tracing: Modify soft-mode only if there's no other referrer
tracing: Indicate enabled soft-mode in enable file
tracing/kprobes: Fix to increment return event probe hit-count
ftrace: Cleanup regex_lock and ftrace_lock around hash updating
ftrace, kprobes: Fix a deadlock on ftrace_regex_lock
ftrace: Have ftrace_regex_write() return either read or error
tracing: Return error if register_ftrace_function_probe() fails for event_enable_func()
tracing: Don't succeed if event_enable_func did not register anything
ring-buffer: Select IRQ_WORK
Support soft-mode disabling on kprobe-based dynamic events.
Soft-disabling is just ignoring recording if the soft disabled
flag is set.
Link: http://lkml.kernel.org/r/20130509054454.30398.7237.stgit@mhiramat-M0-7522
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Increment probe hit-count for profiling even if it is used
by perf tool. Same thing has already done in trace_uprobe.
Link: http://lkml.kernel.org/r/20130509054436.30398.21133.stgit@mhiramat-M0-7522
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The enabled_functions debugfs file was created to be able to see
what functions have been modified from nops to calling a tracer.
The current method uses the counter in the function record.
As when a ftrace_ops is registered to a function, its count
increases. But that doesn't mean that the function is actively
being traced. /proc/sys/kernel/ftrace_enabled can be set to zero
which would disable it, as well as something can go wrong and
we can think its enabled when only the counter is set.
The record's FTRACE_FL_ENABLED flag is set or cleared when its
function is modified. That is a much more accurate way of knowing
what function is enabled or not.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The iteration of the ftrace function list and the call to
ftrace_match_record() need to be protected by the ftrace_lock.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Both __trace_add_new_event() and __trace_early_add_new_event() do
basically the same thing, except that __trace_add_new_event() does
a little more.
Instead of having duplicate code between the two functions, add
a helper function trace_create_new_event() that both can use.
This will help against having bugs fixed in one function but not
the other.
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Modify soft-mode flag only if no other soft-mode referrer
(currently only the ftrace triggers) by using a reference
counter in each ftrace_event_file.
Without this fix, adding and removing several different
enable/disable_event triggers on the same event clear
soft-mode bit from the ftrace_event_file. This also
happens with a typo of glob on setting triggers.
e.g.
# echo vfs_symlink:enable_event:net:netif_rx > set_ftrace_filter
# cat events/net/netif_rx/enable
0*
# echo typo_func:enable_event:net:netif_rx > set_ftrace_filter
# cat events/net/netif_rx/enable
0
# cat set_ftrace_filter
#### all functions enabled ####
vfs_symlink:enable_event:net:netif_rx:unlimited
As above, we still have a trigger, but soft-mode is gone.
Link: http://lkml.kernel.org/r/20130509054429.30398.7464.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Indicate enabled soft-mode event as "1*" in "enable" file
for each event, because it can be soft-disabled when disable_event
trigger is hit.
Link: http://lkml.kernel.org/r/20130509054426.30398.28202.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cleanup regex_lock and ftrace_lock locking points around
ftrace_ops hash update code.
The new rule is that regex_lock protects ops->*_hash
read-update-write code for each ftrace_ops. Usually,
hash update is done by following sequence.
1. allocate a new local hash and copy the original hash.
2. update the local hash.
3. move(actually, copy) back the local hash to ftrace_ops.
4. update ftrace entries if needed.
5. release the local hash.
This makes regex_lock protect #1-#4, and ftrace_lock
to protect #3, #4 and adding and removing ftrace_ops from the
ftrace_ops_list. The ftrace_lock protects #3 as well because
the move functions update the entries too.
Link: http://lkml.kernel.org/r/20130509054421.30398.83411.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix a deadlock on ftrace_regex_lock which happens when setting
an enable_event trigger on dynamic kprobe event as below.
----
sh-2.05b# echo p vfs_symlink > kprobe_events
sh-2.05b# echo vfs_symlink:enable_event:kprobes:p_vfs_symlink_0 > set_ftrace_filter
=============================================
[ INFO: possible recursive locking detected ]
3.9.0+ #35 Not tainted
---------------------------------------------
sh/72 is trying to acquire lock:
(ftrace_regex_lock){+.+.+.}, at: [<ffffffff810ba6c1>] ftrace_set_hash+0x81/0x1f0
but task is already holding lock:
(ftrace_regex_lock){+.+.+.}, at: [<ffffffff810b7cbd>] ftrace_regex_write.isra.29.part.30+0x3d/0x220
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(ftrace_regex_lock);
lock(ftrace_regex_lock);
*** DEADLOCK ***
----
To fix that, this introduces a finer regex_lock for each ftrace_ops.
ftrace_regex_lock is too big of a lock which protects all
filter/notrace_hash operations, but it doesn't need to be a global
lock after supporting multiple ftrace_ops because each ftrace_ops
has its own filter/notrace_hash.
Link: http://lkml.kernel.org/r/20130509054417.30398.84254.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
[ Added initialization flag and automate mutex initialization for
non ftrace.c ftrace_probes. ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As ftrace_regex_write() reads the result of ftrace_process_regex()
which can sometimes return a positive number, only consider a
failure if the return is negative. Otherwise, it will skip possible
other registered probes and by returning a positive number that
wasn't read, it will confuse the user processes doing the writing.
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
register_ftrace_function_probe() returns the number of functions
it registered, which can be zero, it can also return a negative number
if something went wrong. But event_enable_func() only checks for
the case that it didn't register anything, it needs to also check
for the case that something went wrong and return that error code
as well.
Added some comments about the code as well, to make it more
understandable.
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Return 0 instead of the number of activated ftrace function probes if
event_enable_func succeeded and return an error code if it failed or
did not register any functions. But it currently returns the number
of registered functions and if it didn't register anything, it returns 0,
but that is considered success.
This also fixes the return value. As if it succeeds, it returns the
number of functions that were enabled, which is returned back to
the user in ftrace_regex_write (the write() return code). If only
one function is enabled, then the return code of the write is one,
and this can confuse the user program in thinking it only wrote 1
byte.
Link: http://lkml.kernel.org/r/20130509054413.30398.55650.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
[ Rewrote change log to reflect that this fixes two bugs - SR ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull block driver updates from Jens Axboe:
"It might look big in volume, but when categorized, not a lot of
drivers are touched. The pull request contains:
- mtip32xx fixes from Micron.
- A slew of drbd updates, this time in a nicer series.
- bcache, a flash/ssd caching framework from Kent.
- Fixes for cciss"
* 'for-3.10/drivers' of git://git.kernel.dk/linux-block: (66 commits)
bcache: Use bd_link_disk_holder()
bcache: Allocator cleanup/fixes
cciss: bug fix to prevent cciss from loading in kdump crash kernel
cciss: add cciss_allow_hpsa module parameter
drivers/block/mg_disk.c: add CONFIG_PM_SLEEP to suspend/resume functions
mtip32xx: Workaround for unaligned writes
bcache: Make sure blocksize isn't smaller than device blocksize
bcache: Fix merge_bvec_fn usage for when it modifies the bvm
bcache: Correctly check against BIO_MAX_PAGES
bcache: Hack around stuff that clones up to bi_max_vecs
bcache: Set ra_pages based on backing device's ra_pages
bcache: Take data offset from the bdev superblock.
mtip32xx: mtip32xx: Disable TRIM support
mtip32xx: fix a smatch warning
bcache: Disable broken btree fuzz tester
bcache: Fix a format string overflow
bcache: Fix a minor memory leak on device teardown
bcache: Documentation updates
bcache: Use WARN_ONCE() instead of __WARN()
bcache: Add missing #include <linux/prefetch.h>
...
As the wake up logic for waiters on the buffer has been moved
from the tracing code to the ring buffer, it requires also adding
IRQ_WORK as the wake up code is performed via irq_work.
This fixes compile breakage when a user of the ring buffer is selected
but tracing and irq_work are not.
Link http://lkml.kernel.org/r/20130503115332.GT8356@rric.localhost
Cc: Arnd Bergmann <arnd@arndb.de>
Reported-by: Robert Richter <rric@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull perf updates from Ingo Molnar:
"Features:
- Add "uretprobes" - an optimization to uprobes, like kretprobes are
an optimization to kprobes. "perf probe -x file sym%return" now
works like kretprobes. By Oleg Nesterov.
- Introduce per core aggregation in 'perf stat', from Stephane
Eranian.
- Add memory profiling via PEBS, from Stephane Eranian.
- Event group view for 'annotate' in --stdio, --tui and --gtk, from
Namhyung Kim.
- Add support for AMD NB and L2I "uncore" counters, by Jacob Shin.
- Add Ivy Bridge-EP uncore support, by Zheng Yan
- IBM zEnterprise EC12 oprofile support patchlet from Robert Richter.
- Add perf test entries for checking breakpoint overflow signal
handler issues, from Jiri Olsa.
- Add perf test entry for for checking number of EXIT events, from
Namhyung Kim.
- Add perf test entries for checking --cpu in record and stat, from
Jiri Olsa.
- Introduce perf stat --repeat forever, from Frederik Deweerdt.
- Add --no-demangle to report/top, from Namhyung Kim.
- PowerPC fixes plus a couple of cleanups/optimizations in uprobes
and trace_uprobes, by Oleg Nesterov.
Various fixes and refactorings:
- Fix dependency of the python binding wrt libtraceevent, from
Naohiro Aota.
- Simplify some perf_evlist methods and to allow 'stat' to share code
with 'record' and 'trace', by Arnaldo Carvalho de Melo.
- Remove dead code in related to libtraceevent integration, from
Namhyung Kim.
- Revert "perf sched: Handle PERF_RECORD_EXIT events" to get 'perf
sched lat' back working, by Arnaldo Carvalho de Melo
- We don't use Newt anymore, just plain libslang, by Arnaldo Carvalho
de Melo.
- Kill a bunch of die() calls, from Namhyung Kim.
- Fix build on non-glibc systems due to libio.h absence, from Cody P
Schafer.
- Remove some perf_session and tracing dead code, from David Ahern.
- Honor parallel jobs, fix from Borislav Petkov
- Introduce tools/lib/lk library, initially just removing duplication
among tools/perf and tools/vm. from Borislav Petkov
... and many more I missed to list, see the shortlog and git log for
more details."
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (136 commits)
perf/x86/intel/P4: Robistify P4 PMU types
perf/x86/amd: Fix AMD NB and L2I "uncore" support
perf/x86/amd: Remove old-style NB counter support from perf_event_amd.c
perf/x86: Check all MSRs before passing hw check
perf/x86/amd: Add support for AMD NB and L2I "uncore" counters
perf/x86/intel: Add Ivy Bridge-EP uncore support
perf/x86/intel: Fix SNB-EP CBO and PCU uncore PMU filter management
perf/x86: Avoid kfree() in CPU_{STARTING,DYING}
uprobes/perf: Avoid perf_trace_buf_prepare/submit if ->perf_events is empty
uprobes/tracing: Don't pass addr=ip to perf_trace_buf_submit()
uprobes/tracing: Change create_trace_uprobe() to support uretprobes
uprobes/tracing: Make seq_printf() code uretprobe-friendly
uprobes/tracing: Make register_uprobe_event() paths uretprobe-friendly
uprobes/tracing: Make uprobe_{trace,perf}_print() uretprobe-friendly
uprobes/tracing: Introduce is_ret_probe() and uretprobe_dispatcher()
uprobes/tracing: Introduce uprobe_{trace,perf}_print() helpers
uprobes/tracing: Generalize struct uprobe_trace_entry_head
uprobes/tracing: Kill the pointless local_save_flags/preempt_count calls
uprobes/tracing: Kill the pointless seq_print_ip_sym() call
uprobes/tracing: Kill the pointless task_pt_regs() calls
...
During the 3.10 merge, a conflict happened and the resolution was
almost, but not quite, correct. An if statement was reversed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[ Duh. That was just silly of me - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Along with the usual minor fixes and clean ups there are a few major
changes with this pull request.
1) Multiple buffers for the ftrace facility
This feature has been requested by many people over the last few years.
I even heard that Google was about to implement it themselves. I finally
had time and cleaned up the code such that you can now create multiple
instances of the ftrace buffer and have different events go to different
buffers. This way, a low frequency event will not be lost in the noise
of a high frequency event.
Note, currently only events can go to different buffers, the tracers
(ie. function, function_graph and the latency tracers) still can only
be written to the main buffer.
2) The function tracer triggers have now been extended.
The function tracer had two triggers. One to enable tracing when a
function is hit, and one to disable tracing. Now you can record a
stack trace on a single (or many) function(s), take a snapshot of the
buffer (copy it to the snapshot buffer), and you can enable or disable
an event to be traced when a function is hit.
3) A perf clock has been added.
A "perf" clock can be chosen to be used when tracing. This will cause
ftrace to use the same clock as perf uses, and hopefully this will make
it easier to interleave the perf and ftrace data for analysis.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJRfnTPAAoJEOdOSU1xswtMqYYH/1WIdrwXmxHflErnYkCIr3sU
QtYae2K5A1HcgiqOvRJrdWMOt016iMx5CaQQyBFM1vvMiPY0sTWRmwNxDfZzz9LN
10jRvWEzZSLtzl+a9mkFWLEpr5nR/QODOxkWFCnRWscp46sp04LSTxGDYsOnPQZB
sam/AQ1h4xA+DqDBChm9BDEUEPorGleTlN54LBaCGgSFGvrbF+eAg2s4vHNAQAvQ
8d5xjSE9zC7J+FqbVxvJTbKI3+EqKL6hMsJKsKfi0SI+FuxBaFMSltXck5zKyTI4
HpNJzXCmw+v90Tju7oMkPHh6RTbESPCHoGU+wqE52fM6m7oScVeuI/kfc6USwU4=
=W1n+
-----END PGP SIGNATURE-----
Merge tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Along with the usual minor fixes and clean ups there are a few major
changes with this pull request.
1) Multiple buffers for the ftrace facility
This feature has been requested by many people over the last few
years. I even heard that Google was about to implement it themselves.
I finally had time and cleaned up the code such that you can now
create multiple instances of the ftrace buffer and have different
events go to different buffers. This way, a low frequency event will
not be lost in the noise of a high frequency event.
Note, currently only events can go to different buffers, the tracers
(ie function, function_graph and the latency tracers) still can only
be written to the main buffer.
2) The function tracer triggers have now been extended.
The function tracer had two triggers. One to enable tracing when a
function is hit, and one to disable tracing. Now you can record a
stack trace on a single (or many) function(s), take a snapshot of the
buffer (copy it to the snapshot buffer), and you can enable or disable
an event to be traced when a function is hit.
3) A perf clock has been added.
A "perf" clock can be chosen to be used when tracing. This will cause
ftrace to use the same clock as perf uses, and hopefully this will
make it easier to interleave the perf and ftrace data for analysis."
* tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (82 commits)
tracepoints: Prevent null probe from being added
tracing: Compare to 1 instead of zero for is_signed_type()
tracing: Remove obsolete macro guard _TRACE_PROFILE_INIT
ftrace: Get rid of ftrace_profile_bits
tracing: Check return value of tracing_init_dentry()
tracing: Get rid of unneeded key calculation in ftrace_hash_move()
tracing: Reset ftrace_graph_filter_enabled if count is zero
tracing: Fix off-by-one on allocating stat->pages
kernel: tracing: Use strlcpy instead of strncpy
tracing: Update debugfs README file
tracing: Fix ftrace_dump()
tracing: Rename trace_event_mutex to trace_event_sem
tracing: Fix comment about prefix in arch_syscall_match_sym_name()
tracing: Convert trace_destroy_fields() to static
tracing: Move find_event_field() into trace_events.c
tracing: Use TRACE_MAX_PRINT instead of constant
tracing: Use pr_warn_once instead of open coded implementation
ring-buffer: Add ring buffer startup selftest
tracing: Bring Documentation/trace/ftrace.txt up to date
tracing: Add "perf" trace_clock
...
Conflicts:
kernel/trace/ftrace.c
kernel/trace/trace.c
Conflicts:
arch/x86/kernel/cpu/perf_event_intel.c
Merge in the latest fixes before applying new patches, resolve the conflict.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit 3a366e614d.
Wanlong Gao reports that it causes a kernel panic on his machine several
minutes after boot. Reverting it removes the panic.
Jens says:
"It's not quite clear why that is yet, so I think we should just revert
the commit for 3.9 final (which I'm assuming is pretty close).
The wifi is crap at the LSF hotel, so sending this email instead of
queueing up a revert and pull request."
Reported-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Requested-by: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
perf_trace_buf_prepare() + perf_trace_buf_submit() make no sense
if this task/CPU has no active counters. Change uprobe_perf_print()
to return if hlist_empty(call->perf_events).
Note: this is not uprobe-specific, we can change other users too.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
uprobe_perf_print() passes addr=ip to perf_trace_buf_submit() for
no reason. This sets perf_sample_data->addr for PERF_SAMPLE_ADDR,
we already have perf_sample_data->ip initialized if PERF_SAMPLE_IP.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Finally change create_trace_uprobe() to check if argv[0][0] == 'r'
and pass the correct "is_ret" to alloc_trace_uprobe().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
Change probes_seq_show() and print_uprobe_event() to check
is_ret_probe() and print the correct data.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
Change uprobe_event_define_fields(), and __set_print_fmt() to check
is_ret_probe() and use the appropriate format/fields.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
Change uprobe_trace_print() and uprobe_perf_print() to check
is_ret_probe() and fill ring_buffer_event accordingly.
Also change uprobe_trace_func() and uprobe_perf_func() to not
_print() if is_ret_probe() is true. Note that we keep ->handler()
nontrivial even for uretprobe, we need this for filtering and for
other potential extensions.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
Create the new functions we need to support uretprobes, and change
alloc_trace_uprobe() to initialize consumer.ret_handler if the new
"is_ret" argument is true. Curently this argument is always false,
so the new code is never called and is_ret_probe(tu) is false too.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
Extract the output code from uprobe_trace_func() and uprobe_perf_func()
into the new helpers, they will be used by ->ret_handler() too. We also
add the unused "unsigned long func" argument in advance, to simplify the
next changes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
struct uprobe_trace_entry_head has a single member for reporting,
"unsigned long ip". If we want to support uretprobes we need to
create another struct which has "func" and "ret_ip" and duplicate
a lot of functions, like trace_kprobe.c does.
To avoid this copy-and-paste horror we turn ->ip into ->vaddr[]
and add couple of trivial helpers to calculate sizeof/data. This
uglifies the code a bit, but this allows us to avoid a lot more
complications later, when we add the support for ret-probes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
uprobe_trace_func() is never called with irqs or preemption
disabled, no need to ask preempt_count() or local_save_flags().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Anton Arapov <anton@redhat.com>
seq_print_ip_sym(ip) in print_uprobe_event() is pointless,
kallsyms_lookup(ip) can not resolve a user-space address.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
uprobe_trace_func() and uprobe_perf_func() do not need task_pt_regs(),
we already have "struct pt_regs *regs".
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
It seems that function profiler's hash size is fixed at 1024. Add and
use FTRACE_PROFILE_HASH_BITS instead and update hash size macro.
Link: http://lkml.kernel.org/r/1365551750-4504-1-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace_graph_count can be decreased with a "!" pattern, so that
the enabled flag should be updated too.
Link: http://lkml.kernel.org/r/1365663698-2413-1-git-send-email-namhyung@kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As ftrace_filter_lseek is now used with ftrace_pid_fops, it needs to
be moved out of the #ifdef CONFIG_DYNAMIC_FTRACE section as the
ftrace_pid_fops is defined when DYNAMIC_FTRACE is not.
Cc: stable@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently set_ftrace_pid and set_graph_function files use seq_lseek
for their fops. However seq_open() is called only for FMODE_READ in
the fops->open() so that if an user tries to seek one of those file
when she open it for writing, it sees NULL seq_file and then panic.
It can be easily reproduced with following command:
$ cd /sys/kernel/debug/tracing
$ echo 1234 | sudo tee -a set_ftrace_pid
In this example, GNU coreutils' tee opens the file with fopen(, "a")
and then the fopen() internally calls lseek().
Link: http://lkml.kernel.org/r/1365663302-2170-1-git-send-email-namhyung@kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On the failure path, stat->start and stat->pages will refer same page.
So it'll attempt to free the same page again and get kernel panic.
Link: http://lkml.kernel.org/r/1364820385-32027-1-git-send-email-namhyung@kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use strlcpy() instead of strncpy() as it will always add a '\0'
to the end of the string even if the buffer is smaller than what
is being copied.
Link: http://lkml.kernel.org/r/51624254.30301@asianux.com
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracing control loop used by perf spits out a warning
if the called function is not a control function. This is because
the control function references a per cpu allocated data structure
on struct ftrace_ops that is not allocated for other types of
functions.
commit 0a016409e4 "ftrace: Optimize the function tracer list loop"
Had an optimization done to all function tracing loops to optimize
for a single registered ops. Unfortunately, this allows for a slight
race when tracing starts or ends, where the stub function might be
called after the current registered ops is removed. In this case we
get the following dump:
root# perf stat -e ftrace:function sleep 1
[ 74.339105] WARNING: at include/linux/ftrace.h:209 ftrace_ops_control_func+0xde/0xf0()
[ 74.349522] Hardware name: PRIMERGY RX200 S6
[ 74.357149] Modules linked in: sg igb iTCO_wdt ptp pps_core iTCO_vendor_support i7core_edac dca lpc_ich i2c_i801 coretemp edac_core crc32c_intel mfd_core ghash_clmulni_intel dm_multipath acpi_power_meter pcspk
r microcode vhost_net tun macvtap macvlan nfsd kvm_intel kvm auth_rpcgss nfs_acl lockd sunrpc uinput xfs libcrc32c sd_mod crc_t10dif sr_mod cdrom mgag200 i2c_algo_bit drm_kms_helper ttm qla2xxx mptsas ahci drm li
bahci scsi_transport_sas mptscsih libata scsi_transport_fc i2c_core mptbase scsi_tgt dm_mirror dm_region_hash dm_log dm_mod
[ 74.446233] Pid: 1377, comm: perf Tainted: G W 3.9.0-rc1 #1
[ 74.453458] Call Trace:
[ 74.456233] [<ffffffff81062e3f>] warn_slowpath_common+0x7f/0xc0
[ 74.462997] [<ffffffff810fbc60>] ? rcu_note_context_switch+0xa0/0xa0
[ 74.470272] [<ffffffff811041a2>] ? __unregister_ftrace_function+0xa2/0x1a0
[ 74.478117] [<ffffffff81062e9a>] warn_slowpath_null+0x1a/0x20
[ 74.484681] [<ffffffff81102ede>] ftrace_ops_control_func+0xde/0xf0
[ 74.491760] [<ffffffff8162f400>] ftrace_call+0x5/0x2f
[ 74.497511] [<ffffffff8162f400>] ? ftrace_call+0x5/0x2f
[ 74.503486] [<ffffffff8162f400>] ? ftrace_call+0x5/0x2f
[ 74.509500] [<ffffffff810fbc65>] ? synchronize_sched+0x5/0x50
[ 74.516088] [<ffffffff816254d5>] ? _cond_resched+0x5/0x40
[ 74.522268] [<ffffffff810fbc65>] ? synchronize_sched+0x5/0x50
[ 74.528837] [<ffffffff811041a2>] ? __unregister_ftrace_function+0xa2/0x1a0
[ 74.536696] [<ffffffff816254d5>] ? _cond_resched+0x5/0x40
[ 74.542878] [<ffffffff8162402d>] ? mutex_lock+0x1d/0x50
[ 74.548869] [<ffffffff81105c67>] unregister_ftrace_function+0x27/0x50
[ 74.556243] [<ffffffff8111eadf>] perf_ftrace_event_register+0x9f/0x140
[ 74.563709] [<ffffffff816254d5>] ? _cond_resched+0x5/0x40
[ 74.569887] [<ffffffff8162402d>] ? mutex_lock+0x1d/0x50
[ 74.575898] [<ffffffff8111e94e>] perf_trace_destroy+0x2e/0x50
[ 74.582505] [<ffffffff81127ba9>] tp_perf_event_destroy+0x9/0x10
[ 74.589298] [<ffffffff811295d0>] free_event+0x70/0x1a0
[ 74.595208] [<ffffffff8112a579>] perf_event_release_kernel+0x69/0xa0
[ 74.602460] [<ffffffff816254d5>] ? _cond_resched+0x5/0x40
[ 74.608667] [<ffffffff8112a640>] put_event+0x90/0xc0
[ 74.614373] [<ffffffff8112a740>] perf_release+0x10/0x20
[ 74.620367] [<ffffffff811a3044>] __fput+0xf4/0x280
[ 74.625894] [<ffffffff811a31de>] ____fput+0xe/0x10
[ 74.631387] [<ffffffff81083697>] task_work_run+0xa7/0xe0
[ 74.637452] [<ffffffff81014981>] do_notify_resume+0x71/0xb0
[ 74.643843] [<ffffffff8162fa92>] int_signal+0x12/0x17
To fix this a new ftrace_ops flag is added that denotes the ftrace_list_end
ftrace_ops stub as just that, a stub. This flag is now checked in the
control loop and the function is not called if the flag is set.
Thanks to Jovi for not just reporting the bug, but also pointing out
where the bug was in the code.
Link: http://lkml.kernel.org/r/514A8855.7090402@redhat.com
Link: http://lkml.kernel.org/r/1364377499-1900-15-git-send-email-jovi.zhangwei@huawei.com
Tested-by: WANG Chao <chaowang@redhat.com>
Reported-by: WANG Chao <chaowang@redhat.com>
Reported-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If we reenable ftrace via syctl, we currently set ftrace_trace_function
based on the previous simplistic algorithm. This is inconsistent with
what update_ftrace_function does. So better call that helper instead.
Link: http://lkml.kernel.org/r/5151D26F.1070702@siemens.com
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The commit 34600f0e9 "tracing: Fix race with max_tr and changing tracers"
fixed the updating of the main buffers with the race of changing
tracers, but left out the fix to the updating of just a per cpu buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For NUL terminated string we always need to set '\0' at the end.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: rostedt@goodmis.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/516243B7.9020405@asianux.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For NUL terminated string we always need to set '\0' at the end.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: rostedt@goodmis.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/51624254.30301@asianux.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Exported so it can be used by bcache's tracepoints
Signed-off-by: Kent Overstreet <koverstreet@google.com>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@redhat.com>
Update the README file in debugfs/tracing to something more useful.
What's currently in the file is very old and what it shows doesn't
have much use. Heck, it tells you how to mount debugfs! But to read
this file you would have already needed to mount it.
Replace the file with current up-to-date information. It's rather
limited, but what do you expect from a pseudo README file.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_dump() had a lot of issues. What ftrace_dump() does, is when
ftrace_dump_on_oops is set (via a kernel parameter or sysctl), it
will dump out the ftrace buffers to the console when either a oops,
panic, or a sysrq-z occurs.
This was written a long time ago when ftrace was fragile to recursion.
But it wasn't written well even for that.
There's a possible deadlock that can occur if a ftrace_dump() is happening
and an NMI triggers another dump. This is because it grabs a lock
before checking if the dump ran.
It also totally disables ftrace, and tracing for no good reasons.
As the ring_buffer now checks if it is read via a oops or NMI, where
there's a chance that the buffer gets corrupted, it will disable
itself. No need to have ftrace_dump() do the same.
ftrace_dump() is now cleaned up where it uses an atomic counter to
make sure only one dump happens at a time. A simple atomic_inc_return()
is enough that is needed for both other CPUs and NMIs. No need for
a spinlock, as if one CPU is running the dump, no other CPU needs
to do it too.
The tracing_on variable is turned off and not turned on. The original
code did this, but it wasn't pretty. By just disabling this variable
we get the result of not seeing traces that happen between crashes.
For sysrq-z, it doesn't get turned on, but the user can always write
a '1' to the tracing_on file. If they are using sysrq-z, then they should
know about tracing_on.
The new code is much easier to read and less error prone. No more
deadlock possibility when an NMI triggers here.
Reported-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_event_mutex is an rw semaphore now, not a mutex, change the name.
Link: http://lkml.kernel.org/r/513D843B.40109@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
[ Forward ported to my new code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ppc64 has its own syscall prefix like ".SyS" or ".sys". Make the
comment in arch_syscall_match_sym_name() more understandable.
Link: http://lkml.kernel.org/r/513D842F.40205@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_destroy_fields() is not used outside of the file. It can be
a static function.
Link: http://lkml.kernel.org/r/513D842A.2000907@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
By moving find_event_field() and trace_find_field() into trace_events.c,
the ftrace_common_fields list and trace_get_fields() can become local to
the trace_events.c file.
find_event_field() is renamed to trace_find_event_field() to conform to
the tracing global function names.
Link: http://lkml.kernel.org/r/513D8426.9070109@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
[ rostedt: Modified trace_find_field() to trace_find_event_field() ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
TRACE_MAX_PRINT macro is defined, but is not used.
Link: http://lkml.kernel.org/r/513D8421.4070404@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use pr_warn_once, instead of making an open coded implementation.
Link: http://lkml.kernel.org/r/513D8419.20400@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When testing my large changes to the ftrace system, there was
a bug that looked like the ring buffer was dropping events.
I wrote up a quick integrity checker of the ring buffer to
see if it was.
Although the bug ended up being something stupid I did in ftrace,
and had nothing to do with the ring buffer, I figured if I spent
the time to write up this test, I might as well include it in the
kernel.
I cleaned it up a bit, as the original version was rather ugly.
Not saying this version is pretty, but it's a beauty queen
compared to what I original wrote.
To enable the start up test, set CONFIG_RING_BUFFER_STARTUP_TEST.
Note, it runs for 10 seconds, so it will slow your boot time
by at least 10 more seconds.
What it does is documented in both the comments and the Kconfig
help.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function trace_clock() calls "local_clock()" which is exactly
the same clock that perf uses. I'm not sure why perf doesn't call
trace_clock(), as trace_clock() doesn't have any users.
But now it does. As trace_clock() calls local_clock() like perf does,
I added the trace_clock "perf" option that uses trace_clock().
Now the ftrace buffers can use the same clock as perf uses. This
will be useful when perf starts reading the ftrace buffers, and will
be able to interleave them with the same clock data.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a simple trace clock called "uptime" for those that are
interested in the uptime of the trace. It uses jiffies as that's
the safest method, as other uptime clocks grab seq locks, which could
cause a deadlock if taken from an event or function tracer.
Requested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, the only way to stop the latency tracers from doing function
tracing is to fully disable the function tracer from the proc file
system:
echo 0 > /proc/sys/kernel/ftrace_enabled
This is a big hammer approach as it disables function tracing for
all users. This includes kprobes, perf, stack tracer, etc.
Instead, create a function-trace option that the latency tracers can
check to determine if it should enable function tracing or not.
This option can be set or cleared even while the tracer is active
and the tracers will disable or enable function tracing depending
on how the option was set.
Instead of using the proc file, disable latency function tracing with
echo 0 > /debug/tracing/options/function-trace
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, the depth reported in the stack tracer stack_trace file
does not match the stack_max_size file. This is because the stack_max_size
includes the overhead of stack tracer itself while the depth does not.
The first time a max is triggered, a calculation is not performed that
figures out the overhead of the stack tracer and subtracts it from
the stack_max_size variable. The overhead is stored and is subtracted
from the reported stack size for comparing for a new max.
Now the stack_max_size corresponds to the reported depth:
# cat stack_max_size
4640
# cat stack_trace
Depth Size Location (48 entries)
----- ---- --------
0) 4640 32 _raw_spin_lock+0x18/0x24
1) 4608 112 ____cache_alloc+0xb7/0x22d
2) 4496 80 kmem_cache_alloc+0x63/0x12f
3) 4416 16 mempool_alloc_slab+0x15/0x17
[...]
While testing against and older gcc on x86 that uses mcount instead
of fentry, I found that pasing in ip + MCOUNT_INSN_SIZE let the
stack trace show one more function deep which was missing before.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When gcc 4.6 on x86 is used, the function tracer will use the new
option -mfentry which does a call to "fentry" at every function
instead of "mcount". The significance of this is that fentry is
called as the first operation of the function instead of the mcount
usage of being called after the stack.
This causes the stack tracer to show some bogus results for the size
of the last function traced, as well as showing "ftrace_call" instead
of the function. This is due to the stack frame not being set up
by the function that is about to be traced.
# cat stack_trace
Depth Size Location (48 entries)
----- ---- --------
0) 4824 216 ftrace_call+0x5/0x2f
1) 4608 112 ____cache_alloc+0xb7/0x22d
2) 4496 80 kmem_cache_alloc+0x63/0x12f
The 216 size for ftrace_call includes both the ftrace_call stack
(which includes the saving of registers it does), as well as the
stack size of the parent.
To fix this, if CC_USING_FENTRY is defined, then the stack_tracer
will reserve the first item in stack_dump_trace[] array when
calling save_stack_trace(), and it will fill it in with the parent ip.
Then the code will look for the parent pointer on the stack and
give the real size of the parent's stack pointer:
# cat stack_trace
Depth Size Location (14 entries)
----- ---- --------
0) 2640 48 update_group_power+0x26/0x187
1) 2592 224 update_sd_lb_stats+0x2a5/0x4ac
2) 2368 160 find_busiest_group+0x31/0x1f1
3) 2208 256 load_balance+0xd9/0x662
I'm Cc'ing stable, although it's not urgent, as it only shows bogus
size for item #0, the rest of the trace is legit. It should still be
corrected in previous stable releases.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use the stack of stack_trace_call() instead of check_stack() as
the test pointer for max stack size. It makes it a bit cleaner
and a little more accurate.
Adding stable, as a later fix depends on this patch.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Altough the trace_dump_stack() already skips three functions in
the call to stack trace, which gets the stack trace to start
at the caller of the function, the caller may want to skip some
more too (as it may have helper functions).
Add a skip argument to the trace_dump_stack() that lets the caller
skip back tracing functions that it doesn't care about.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add triggers to function tracer that lets an event get enabled or
disabled when a function is called:
format is:
<function>:enable_event:<system>:<event>[:<count>]
<function>:disable_event:<system>:<event>[:<count>]
echo 'schedule:enable_event:sched:sched_switch' > /debug/tracing/set_ftrace_filter
Every time schedule is called, it will enable the sched_switch event.
echo 'schedule:disable_event:sched:sched_switch:2' > /debug/tracing/set_ftrace_filter
The first two times schedule is called while the sched_switch
event is enabled, it will disable it. It will not count for a time
that the event is already disabled (or enabled for enable_event).
[ fixed return without mutex_unlock() - thanks to Dan Carpenter and smatch ]
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In order to let triggers enable or disable events, we need a 'soft'
method for doing so. For example, if a function probe is added that
lets a user enable or disable events when a function is called, that
change must be done without taking locks or a mutex, and definitely
it can't sleep. But the full enabling of a tracepoint is expensive.
By adding a 'SOFT_DISABLE' flag, and converting the flags to be updated
without the protection of a mutex (using set/clear_bit()), this soft
disable flag can be used to allow critical sections to enable or disable
events from being traced (after the event has been placed into "SOFT_MODE").
Some caveats though: The comm recorder (to map pids with a comm) can not
be soft disabled (yet). If you disable an event with with a "soft"
disable and wait a while before reading the trace, the comm cache may be
replaced and you'll get a bunch of <...> for comms in the trace.
Reading the "enable" file for an event that is disabled will now give
you "0*" where the '*' denotes that the tracepoint is still active but
the event itself is "disabled".
[ fixed _BIT used in & operation : thanks to Dan Carpenter and smatch ]
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The entries to the probe hash must be freed after a synchronize_sched()
after the entry has been removed from the hash.
As the entries are registered with ops that may have their own callbacks,
and these callbacks may sleep, we can not use call_rcu_sched() because
the rcu callbacks registered with that are called from a softirq context.
Instead of using call_rcu_sched(), manually save the entries on a free_list
and at the end of the loop that removes the entries, do a synchronize_sched()
and then go through the free_list, freeing the entries.
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a function probe is created, each function that the probe is
attached to, a "callback" method is called. On release of the probe,
each function entry calls the "free" method.
First, "callback" is a confusing name and does not really match what
it does. Callback sounds like it will be called when the probe
triggers. But that's not the case. This is really an "init" function,
so lets rename it as such.
Secondly, both "init" and "free" do not pass enough information back
to the handlers. Pass back the ops, ip and data for each time the
method is called. We have the information, might as well use it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
echo 'schedule:snapshot:1' > /debug/tracing/set_ftrace_filter
This will cause the scheduler to trigger a snapshot the next time
it's called (you can use any function that's not called by NMI).
Even though it triggers only once, you still need to remove it with:
echo '!schedule:snapshot:0' > /debug/tracing/set_ftrace_filter
The :1 can be left off for the first command:
echo 'schedule:snapshot' > /debug/tracing/set_ftrace_filter
But this will cause all calls to schedule to trigger a snapshot.
This must be removed without the ':0'
echo '!schedule:snapshot' > /debug/tracing/set_ftrace_filter
As adding a "count" is a different operation (internally).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add alloc_snapshot() and free_snapshot() to allocate and free the
snapshot buffer respectively, and use these to remove duplicate
code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the function probe enables all functions and runs a "hash"
against every function call to see if it should call a probe. This
is extremely wasteful.
Note, a probe is something like:
echo schedule:traceoff > /debug/tracing/set_ftrace_filter
When schedule is called, the probe will disable tracing. But currently,
it has a call back for *all* functions, and checks to see if the
called function is the probe that is needed.
The probe function has been created before ftrace was rewritten to
allow for more than one "op" to be registered by the function tracer.
When probes were created, it couldn't limit the functions without also
limiting normal function calls. But now we can, it's about time
to update the probe code.
Todo, have separate ops for different entries. That is, assign
a ftrace_ops per probe, instead of one op for all probes. But
as there's not many probes assigned, this may not be that urgent.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracing probes that trigger traceon or traceoff can be
set to unlimited, or given a count of # of times to execute.
By separating these two types of probes, we can then use the dynamic
ftrace function filtering directly, and remove the brute force
"check if this function called is my probe" routines in ftrace.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The only thing ftrace_trace_onoff_unreg() does is to do a strcmp()
against the cmd parameter to determine what op to unregister. But
this compare is also done after the location that this function is
called (and returns). By moving the check for '!' to unregister after
the strcmp(), the callback function itself can just do the unregister
and we can get rid of the helper function.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove some duplicate code and replace it with a helper function.
This makes the code a it cleaner.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add EXPORT_SYMBOL_GPL() to let the tracing_snapshot() functions be
called from modules.
Also add a test to see if the snapshot was called from NMI context
and just warn in the tracing buffer if so, and return.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a few places that ftrace uses trace_printk() for internal
use, but this requires context (normal, softirq, irq, NMI) buffers
to keep things lockless. But the trace_puts() does not, as it can
write the string directly into the ring buffer. Make a internal helper
for trace_puts() and have the internal functions use that.
This way the extra context buffers are not used.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_printk() is extremely fast and is very handy as it can be
used in any context (including NMIs!). But it still requires scanning
the fmt string for parsing the args. Even the trace_bprintk() requires
a scan to know what args will be saved, although it doesn't copy the
format string itself.
Several times trace_printk() has no args, and wastes cpu cycles scanning
the fmt string.
Adding trace_puts() allows the developer to use an even faster
tracing method that only saves the pointer to the string in the
ring buffer without doing any format parsing at all. This will
help remove even more of the "Heisenbug" effect, when debugging.
Also fixed up the F_printk()s for the ftrace internal bprint and print events.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The changce to add the trace_buffer struct to have the trace array
have both the main buffer and max buffer broke the branch tracer
because the change did not update that code. As the branch tracer
adds a significant amount of overhead, and must be selected via
a selection (not a allyesconfig) it was missed in testing.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If debugging the kernel, and the developer wants to use
tracing_snapshot() in places where tracing_snapshot_alloc() may
be difficult (or more likely, the developer is lazy and doesn't
want to bother with tracing_snapshot_alloc() at all), then adding
alloc_snapshot
to the kernel command line parameter will tell ftrace to allocate
the snapshot buffer (if configured) when it allocates the main
tracing buffer.
I also noticed that ring_buffer_expanded and tracing_selftest_disabled
had inconsistent use of boolean "true" and "false" with "0" and "1".
I cleaned that up too.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move the tracing startup selftest code into its own function and
when not enabled, always have that function succeed.
This makes the register_tracer() function much more readable.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring buffer updates when done while the ring buffer is active,
needs to be completed on the CPU that is used for the ring buffer
per_cpu buffer. To accomplish this, schedule_work_on() is used to
schedule work on the given CPU.
Now there's no reason to use schedule_work_on() if the process
doing the update happens to be on the CPU that it is processing.
It has already filled the requirement. Instead, just do the work
and continue.
This is needed for tracing_snapshot_alloc() where it may be called
really early in boot, where the work queues have not been set up yet.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The new snapshot feature is quite handy. It's a way for the user
to take advantage of the spare buffer that, until then, only
the latency tracers used to "snapshot" the buffer when it hit
a max latency. Now users can trigger a "snapshot" manually when
some condition is hit in a program. But a snapshot currently can
not be triggered by a condition inside the kernel.
With the addition of tracing_snapshot() and tracing_snapshot_alloc(),
snapshots can now be taking when a condition is hit, and the
developer wants to snapshot the case without stopping the trace.
Note, any snapshot will overwrite the old one, so take care
in how this is done.
These new functions are to be used like tracing_on(), tracing_off()
and trace_printk() are. That is, they should never be called
in the mainline Linux kernel. They are solely for the purpose
of debugging.
The tracing_snapshot() will not allocate a buffer, but it is
safe to be called from any context (except NMIs). But if a
snapshot buffer isn't allocated when it is called, it will write
to the live buffer, complaining about the lack of a snapshot
buffer, and then stop tracing (giving you the "permanent snapshot").
tracing_snapshot_alloc() will allocate the snapshot buffer if
it was not already allocated and then take the snapshot. This routine
*may sleep*, and must be called from context that can sleep.
The allocation is done with GFP_KERNEL and not atomic.
If you need a snapshot in an atomic context, say in early boot,
then it is best to call the tracing_snapshot_alloc() before then,
where it will allocate the buffer, and then you can use the
tracing_snapshot() anywhere you want and still get snapshots.
Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a ref count to the trace_array structure and prevent removal
of instances that have open descriptors.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the per_cpu directory to the created tracing instances:
cd /sys/kernel/debug/tracing/instances
mkdir foo
ls foo/per_cpu/cpu0
buffer_size_kb snapshot_raw trace trace_pipe_raw
snapshot stats trace_pipe
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the "snapshot" file to the the multi-buffer instances.
cd /sys/kernel/debug/tracing/instances
mkdir foo
ls foo
buffer_size_kb buffer_total_size_kb events free_buffer set_event
snapshot trace trace_clock trace_marker trace_options trace_pipe
tracing_on
cat foo/snapshot
# tracer: nop
#
#
# * Snapshot is freed *
#
# Snapshot commands:
# echo 0 > snapshot : Clears and frees snapshot buffer
# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
# Takes a snapshot of the main buffer.
# echo 2 > snapshot : Clears snapshot buffer (but does not allocate)
# (Doesn't have to be '2' works with any number that
# is not a '0' or '1')
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a bit of duplicate code in creating the trace buffers for
the normal trace buffer and the max trace buffer among the instances
and the main global_trace. This code can be consolidated and cleaned
up a bit making the code cleaner and more readable as well as less
duplication.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The snapshot buffer belongs to the trace array not the tracer that is
running. The trace array should be the data structure that keeps track
of whether or not the snapshot buffer is allocated, not the tracer
desciptor. Having the trace array keep track of it makes modifications
so much easier.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a 'snapshot_raw' per_cpu file that allows tools to read the raw
binary data of the snapshot buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the preempt or irq latency tracers are enabled, they require
the ring buffer to be able to swap the per cpu sub buffers between
two main buffers. This adds a slight overhead to tracing as the
trace recording needs to perform some checks to synchronize
between recording and swaps that might be happening on other CPUs.
The config RING_BUFFER_ALLOW_SWAP is set when a user of the ring
buffer needs the "swap cpu" feature, otherwise the extra checks
are not implemented and removed from the tracing overhead.
The snapshot feature will swap per CPU if the RING_BUFFER_ALLOW_SWAP
config is set. But that only gets set by things like OPROFILE
and the irqs and preempt latency tracers.
This config is added to let the user decide to include this feature
with the snapshot agnostic from whether or not another user of
the ring buffer sets this config.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the snapshot file into the per_cpu tracing directories to allow
them to be read for an individual cpu. This also allows to clear
an individual cpu from the snapshot buffer.
If the kernel allows it (CONFIG_RING_BUFFER_ALLOW_SWAP is set), then
echoing in '1' into one of the per_cpu snapshot files will do an
individual cpu buffer swap instead of the entire file.
Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, the way the latency tracers and snapshot feature works
is to have a separate trace_array called "max_tr" that holds the
snapshot buffer. For latency tracers, this snapshot buffer is used
to swap the running buffer with this buffer to save the current max
latency.
The only items needed for the max_tr is really just a copy of the buffer
itself, the per_cpu data pointers, the time_start timestamp that states
when the max latency was triggered, and the cpu that the max latency
was triggered on. All other fields in trace_array are unused by the
max_tr, making the max_tr mostly bloat.
This change removes the max_tr completely, and adds a new structure
called trace_buffer, that holds the buffer pointer, the per_cpu data
pointers, the time_start timestamp, and the cpu where the latency occurred.
The trace_array, now has two trace_buffers, one for the normal trace and
one for the max trace or snapshot. By doing this, not only do we remove
the bloat from the max_trace but the instances of traces can now use
their own snapshot feature and not have just the top level global_trace have
the snapshot feature and latency tracers for itself.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The snapshot utility is extremely useful, and does not add any more
overhead in memory when another latency tracer is enabled. They use
the snapshot underneath. There's no reason to hide the snapshot file
when a latency tracer has been enabled in the kernel.
If any of the latency tracers (irq, preempt or wakeup) is enabled
then also select the snapshot facility.
Note, snapshot can be enabled without the latency tracers enabled.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently we do not know what buffer a module event was enabled in.
On unload, it is safest to clear all buffer instances, not just the
top level buffer.
Todo: Clear only the buffer that the event was used in. The
infrastructure is there to do this, but it makes the code a bit
more complex. Lets get the current code vetted before we add that.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, when a module with events is unloaded, the trace buffer is
cleared. This is just a safety net in case the module might have some
strange callback when its event is outputted. But there's no reason
to reset the buffer if the module didn't have any of its events traced.
Add a flag to the event "call" structure called WAS_ENABLED and gets set
when the event is ever enabled, and this flag never gets cleared. When a
module gets unloaded, if any of its events have this flag set, then the
trace buffer will get cleared.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The move of blocked readers to the ring buffer left out the
init of the wait queue that is used. Tests missed this due to running
stress tests against the buffers, which didn't allow for any
readers to end up waiting. Running a simple read and wait triggered
a bug.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As we've added __init annotation to field-defining functions, we should
add __refdata annotation to event_call variables, which reference those
functions.
Link: http://lkml.kernel.org/r/51343C1F.2050502@huawei.com
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The new multi-buffers added a descriptor that kept track of module
events, and the directories they use, with struct ftace_module_file_ops.
This is used to add a ref count to keep modules from unloading while
their files are being accessed.
As the descriptor is only needed when CONFIG_MODULES is enabled, it
is only declared when the config is enabled. But that struct is
dereferenced in a few areas outside the #ifdef CONFIG_MODULES.
By adding some helper routines and moving code around a little,
events can be compiled again without modules.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the conversion of the data array to per cpu, sparse now complains
about the use of per_cpu_ptr() on the variable. But The variable is
allocated with alloc_percpu() and is fine to use. But since the structure
that contains the data variable does not annotate it as such, sparse
gives out a lot of false warnings.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
These two functions are called during kernel boot only.
Link: http://lkml.kernel.org/r/51258796.7020704@huawei.com
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move duplicate code in event print functions to a helper function.
This shrinks the size of the kernel by ~13K.
text data bss dec hex filename
6596137 1743966 10138672 18478775 119f6b7 vmlinux.o.old
6583002 1743849 10138672 18465523 119c2f3 vmlinux.o.new
Link: http://lkml.kernel.org/r/51258746.2060304@huawei.com
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move the logic to wake up on ring buffer data into the ring buffer
code itself. This simplifies the tracing code a lot and also has the
added benefit that waiters on one of the instance buffers can be woken
only when data is added to that instance instead of data added to
any instance.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the ring buffer is empty, a read to trace_pipe_raw wont block.
The tracing code has the infrastructure to wake up waiting readers,
but the trace_pipe_raw doesn't take advantage of that.
When a read is done to trace_pipe_raw without the O_NONBLOCK flag
set, have the read block until there's data in the requested buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_pipe_raw never implemented polling and this was casing
issues for several utilities. This is now implemented.
Blocked reads still are on the TODO list.
Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently only the splice NONBLOCK flag is checked to determine if
the splice read should block or not. But the file descriptor NONBLOCK
flag also needs to be checked.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The names used to display the field and type in the event format
files are copied, as well as the system name that is displayed.
All these names are created by constant values passed in.
If one of theses values were to be removed by a module, the module
would also be required to remove any event it created.
By using the strings directly, we can save over 100K of memory.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The event structures used by the trace events are mostly persistent,
but they are also allocated by kmalloc, which is not the best at
allocating space for what is used. By converting these kmallocs
into kmem_cache_allocs, we can save over 50K of space that is
permanently allocated.
After boot we have:
slab name active allocated size
--------- ------ --------- ----
ftrace_event_file 979 1005 56 67 1
ftrace_event_field 2301 2310 48 77 1
The ftrace_event_file has at boot up 979 active objects out of
1005 allocated in the slabs. Each object is 56 bytes. In a normal
kmalloc, that would allocate 64 bytes for each object.
1005 - 979 = 26 objects not used
26 * 56 = 1456 bytes wasted
But if we used kmalloc:
64 - 56 = 8 bytes unused per allocation
8 * 979 = 7832 bytes wasted
7832 - 1456 = 6376 bytes in savings
Doing the same for ftrace_event_field where there's 2301 objects
allocated in a slab that can hold 2310 with 48 bytes each we have:
2310 - 2301 = 9 objects not used
9 * 48 = 432 bytes wasted
A kmalloc would also use 64 bytes per object:
64 - 48 = 16 bytes unused per allocation
16 * 2301 = 36816 bytes wasted!
36816 - 432 = 36384 bytes in savings
This change gives us a total of 42760 bytes in savings. At least
on my machine, but as there's a lot of these persistent objects
for all configurations that use trace points, this is a net win.
Thanks to Ezequiel Garcia for his trace_analyze presentation which
pointed out the wasted space in my code.
Cc: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the new descriptors used to allow multiple buffers in the
tracing directory added, the kernel command line parameter
trace_events=... no longer works. This is because the top level
(global) trace array now has a list of descriptors associated
with the events and the files in the debugfs directory. But in
early bootup, when the command line is processed and the events
enabled, the trace array list of events has not been set up yet.
Without the list of events in the trace array, the setting of
events to record will fail because it would not match any events.
The solution is to set up the top level array in two stages.
The first is to just add the ftrace file descriptors that just point
to the events. This will allow events to be enabled and start tracing.
The second stage is called after the filesystem is set up, and this
stage will create the debugfs event files and directories associated
with the trace array events.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a method to the hijacked dentry descriptor of the
"instances" directory to allow for rmdir to remove an
instance of a multibuffer.
Example:
cd /debug/tracing/instances
mkdir hello
ls
hello/
rmdir hello
ls
Like the mkdir method, the i_mutex is dropped for the instances
directory. The instances directory is created at boot up and can
not be renamed or removed. The trace_types_lock mutex is used to
synchronize adding and removing of instances.
I've run several stress tests with different threads trying to
create and delete directories of the same name, and it has stood
up fine.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the interface ("instances" directory) to add multiple buffers
to ftrace. To create a new instance, simply do a mkdir in the
instances directory:
This will create a directory with the following:
# cd instances
# mkdir foo
# ls foo
buffer_size_kb free_buffer trace_clock trace_pipe
buffer_total_size_kb set_event trace_marker tracing_enabled
events/ trace trace_options tracing_on
Currently only events are able to be set, and there isn't a way
to delete a buffer when one is created (yet).
Note, the i_mutex lock is dropped from the parent "instances"
directory during the mkdir operation. As the "instances" directory
can not be renamed or deleted (created on boot), I do not see
any harm in dropping the lock. The creation of the sub directories
is protected by trace_types_lock mutex, which only lets one
instance get into the code path at a time. If two tasks try to
create or delete directories of the same name, only one will occur
and the other will fail with -EEXIST.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the syscall events record into the global buffer. But if
multiple buffers are in place, then we need to have syscall events
record in the proper buffers.
By adding descriptors to pass to the syscall event functions, the
syscall events can now record into the buffers that have been assigned
to them (one event may be applied to mulitple buffers).
This will allow tracing high volume syscalls along with seldom occurring
syscalls without losing the seldom syscall events.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The global and max-tr currently use static per_cpu arrays for the CPU data
descriptors. But in order to get new allocated trace_arrays, they need to
be allocated per_cpu arrays. Instead of using the static arrays, switch
the global and max-tr to use allocated data.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pass the struct ftrace_event_file *ftrace_file to the
trace_event_buffer_lock_reserve() (new function that replaces the
trace_current_buffer_lock_reserver()).
The ftrace_file holds a pointer to the trace_array that is in use.
In the case of multiple buffers with different trace_arrays, this
allows different events to be recorded into different buffers.
Also fixed some of the stale comments in include/trace/ftrace.h
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The global_trace variable in kernel/trace/trace.c has been kept 'static' and
local to that file so that it would not be used too much outside of that
file. This has paid off, even though there were lots of changes to make
the trace_array structure more generic (not depending on global_trace).
Removal of a lot of direct usages of global_trace is needed to be able to
create more trace_arrays such that we can add multiple buffers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Both RING_BUFFER_ALL_CPUS and TRACE_PIPE_ALL_CPU are defined as
-1 and used to say that all the ring buffers are to be modified
or read (instead of just a single cpu, which would be >= 0).
There's no reason to keep TRACE_PIPE_ALL_CPU as it is also started
to be used for more than what it was created for, and now that
the ring buffer code added a generic RING_BUFFER_ALL_CPUS define,
we can clean up the trace code to use that instead and remove
the TRACE_PIPE_ALL_CPU macro.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace events for ftrace are all defined via global variables.
The arrays of events and event systems are linked to a global list.
This prevents multiple users of the event system (what to enable and
what not to).
By adding descriptors to represent the event/file relation, as well
as to which trace_array descriptor they are associated with, allows
for more than one set of events to be defined. Once the trace events
files have a link between the trace event and the trace_array they
are associated with, we can create multiple trace_arrays that can
record separate events in separate buffers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latency tracers require the buffers to be in overwrite mode,
otherwise they get screwed up. Force the buffers to stay in overwrite
mode when latency tracers are enabled.
Added a flag_changed() method to the tracer structure to allow
the tracers to see what flags are being changed, and also be able
to prevent the change from happing.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Changing the overwrite mode for the ring buffer via the trace
option only sets the normal buffer. But the snapshot buffer could
swap with it, and then the snapshot would be in non overwrite mode
and the normal buffer would be in overwrite mode, even though the
option flag states otherwise.
Keep the two buffers overwrite modes in sync.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Seems that the tracer flags have never been protected from
synchronous writes. Luckily, admins don't usually modify the
tracing flags via two different tasks. But if scripts were to
be used to modify them, then they could get corrupted.
Move the trace_types_lock that protects against tracers changing
to also protect the flags being set.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Because function tracing is very invasive, and can even trace
calls to rcu_read_lock(), RCU access in function tracing is done
with preempt_disable_notrace(). This requires a synchronize_sched()
for updates and not a synchronize_rcu().
Function probes (traceon, traceoff, etc) must be freed after
a synchronize_sched() after its entry has been removed from the
hash. But call_rcu() is used. Fix this by using call_rcu_sched().
Also fix the usage to use hlist_del_rcu() instead of hlist_del().
Cc: stable@vger.kernel.org
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Although the swap is wrapped with a spin_lock, the assignment
of the temp buffer used to swap is not within that lock.
It needs to be moved into that lock, otherwise two swaps
happening on two different CPUs, can end up using the wrong
temp buffer to assign in the swap.
Luckily, all current callers of the swap function appear to have
their own locks. But in case something is added that allows two
different callers to call the swap, then there's a chance that
this race can trigger and corrupt the buffers.
New code is coming soon that will allow for this race to trigger.
I've Cc'd stable, so this bug will not show up if someone backports
one of the changes that can trigger this bug.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull perf fixes from Ingo Molnar:
"Misc minor fixes mostly related to tracing"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
s390: Fix a header dependencies related build error
tracing: update documentation of snapshot utility
tracing: Do not return EINVAL in snapshot when not allocated
tracing: Add help of snapshot feature when snapshot is empty
ftrace: Update the kconfig for DYNAMIC_FTRACE
To use the tracing snapshot feature, writing a '1' into the snapshot
file causes the snapshot buffer to be allocated if it has not already
been allocated and dose a 'swap' with the main buffer, so that the
snapshot now contains what was in the main buffer, and the main buffer
now writes to what was the snapshot buffer.
To free the snapshot buffer, a '0' is written into the snapshot file.
To clear the snapshot buffer, any number but a '0' or '1' is written
into the snapshot file. But if the file is not allocated it returns
-EINVAL error code. This is rather pointless. It is better just to
do nothing and return success.
Acked-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When cat'ing the snapshot file, instead of showing an empty trace
header like the trace file does, show how to use the snapshot
feature.
Also, this is a good place to show if the snapshot has been allocated
or not. Users may want to "pre allocate" the snapshot to have a fast
"swap" of the current buffer. Otherwise, a swap would be slow and might
fail as it would need to allocate the snapshot buffer, and that might
fail under tight memory constraints.
Here's what it looked like before:
# tracer: nop
#
# entries-in-buffer/entries-written: 0/0 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
Here's what it looks like now:
# tracer: nop
#
#
# * Snapshot is freed *
#
# Snapshot commands:
# echo 0 > snapshot : Clears and frees snapshot buffer
# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
# Takes a snapshot of the main buffer.
# echo 2 > snapshot : Clears snapshot buffer (but does not allocate)
# (Doesn't have to be '2' works with any number that
# is not a '0' or '1')
Acked-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This adds core architecture support for Imagination's Meta processor
cores, followed by some later miscellaneous arch/metag cleanups and
fixes which I kept separate to ease review:
- Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
- A few fixes all over, particularly for symbol prefixes
- A few privilege protection fixes
- Several cleanups (setup.c includes, split out a lot of metag_ksyms.c)
- Fix some missing exports
- Convert hugetlb to use vm_unmapped_area()
- Copy device tree to non-init memory
- Provide dma_get_sgtable()
Signed-off-by: James Hogan <james.hogan@imgtec.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=65cR
-----END PGP SIGNATURE-----
Merge tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag
Pull new ImgTec Meta architecture from James Hogan:
"This adds core architecture support for Imagination's Meta processor
cores, followed by some later miscellaneous arch/metag cleanups and
fixes which I kept separate to ease review:
- Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
- A few fixes all over, particularly for symbol prefixes
- A few privilege protection fixes
- Several cleanups (setup.c includes, split out a lot of
metag_ksyms.c)
- Fix some missing exports
- Convert hugetlb to use vm_unmapped_area()
- Copy device tree to non-init memory
- Provide dma_get_sgtable()"
* tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits)
metag: Provide dma_get_sgtable()
metag: prom.h: remove declaration of metag_dt_memblock_reserve()
metag: copy devicetree to non-init memory
metag: cleanup metag_ksyms.c includes
metag: move mm/init.c exports out of metag_ksyms.c
metag: move usercopy.c exports out of metag_ksyms.c
metag: move setup.c exports out of metag_ksyms.c
metag: move kick.c exports out of metag_ksyms.c
metag: move traps.c exports out of metag_ksyms.c
metag: move irq enable out of irqflags.h on SMP
genksyms: fix metag symbol prefix on crc symbols
metag: hugetlb: convert to vm_unmapped_area()
metag: export clear_page and copy_page
metag: export metag_code_cache_flush_all
metag: protect more non-MMU memory regions
metag: make TXPRIVEXT bits explicit
metag: kernel/setup.c: sort includes
perf: Enable building perf tools for Meta
metag: add boot time LNKGET/LNKSET check
metag: add __init to metag_cache_probe()
...
Some 32 bit architectures require 64 bit values to be aligned (for
example Meta which has 64 bit read/write instructions). These require 8
byte alignment of event data too, so use
!CONFIG_HAVE_64BIT_ALIGNED_ACCESS instead of !CONFIG_64BIT ||
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to decide alignment, and align
buffer_data_page::data accordingly.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org> (previous version subtly different)
Pull block IO core bits from Jens Axboe:
"Below are the core block IO bits for 3.9. It was delayed a few days
since my workstation kept crashing every 2-8h after pulling it into
current -git, but turns out it is a bug in the new pstate code (divide
by zero, will report separately). In any case, it contains:
- The big cfq/blkcg update from Tejun and and Vivek.
- Additional block and writeback tracepoints from Tejun.
- Improvement of the should sort (based on queues) logic in the plug
flushing.
- _io() variants of the wait_for_completion() interface, using
io_schedule() instead of schedule() to contribute to io wait
properly.
- Various little fixes.
You'll get two trivial merge conflicts, which should be easy enough to
fix up"
Fix up the trivial conflicts due to hlist traversal cleanups (commit
b67bfe0d42: "hlist: drop the node parameter from iterators").
* 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits)
block: remove redundant check to bd_openers()
block: use i_size_write() in bd_set_size()
cfq: fix lock imbalance with failed allocations
drivers/block/swim3.c: fix null pointer dereference
block: don't select PERCPU_RWSEM
block: account iowait time when waiting for completion of IO request
sched: add wait_for_completion_io[_timeout]
writeback: add more tracepoints
block: add block_{touch|dirty}_buffer tracepoint
buffer: make touch_buffer() an exported function
block: add @req to bio_{front|back}_merge tracepoints
block: add missing block_bio_complete() tracepoint
block: Remove should_sort judgement when flush blk_plug
block,elevator: use new hashtable implementation
cfq-iosched: add hierarchical cfq_group statistics
cfq-iosched: collect stats from dead cfqgs
cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats()
blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock
block: RCU free request_queue
blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge()
...
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The prompt to enable DYNAMIC_FTRACE (the ability to nop and
enable function tracing at run time) had a confusing statement:
"enable/disable ftrace tracepoints dynamically"
This was written before tracepoints were added to the kernel,
but now that tracepoints have been added, this is very confusing
and has confused people enough to give wrong information during
presentations.
Not only that, I looked at the help text, and it still references
that dreaded daemon that use to wake up once a second to update
the nop locations and brick NICs, that hasn't been around for over
five years.
Time to bring the text up to the current decade.
Cc: stable@vger.kernel.org
Reported-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
- Rework of the ACPI namespace scanning code from Rafael J. Wysocki
with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
Toshi Kani, and Yinghai Lu.
- ACPI power resources handling and ACPI device PM update from
Rafael J. Wysocki.
- ACPICA update to version 20130117 from Bob Moore and Lv Zheng
with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and
Tim Gardner.
- Support for Intel Lynxpoint LPSS from Mika Westerberg.
- cpuidle update from Len Brown including Intel Haswell support, C1
state for intel_idle, removal of global pm_idle.
- cpuidle fixes and cleanups from Daniel Lezcano.
- cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri
with contributions from Stratos Karafotis and Rickard Andersson.
- Intel P-states driver for Sandy Bridge processors from
Dirk Brandewie.
- cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.
- cpufreq fixes related to ordering issues between acpi-cpufreq and
powernow-k8 from Borislav Petkov and Matthew Garrett.
- cpufreq support for Calxeda Highbank processors from Mark Langsdorf
and Rob Herring.
- cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
from Shawn Guo.
- cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
and Inderpal Singh.
- Support for "lightweight suspend" from Zhang Rui.
- Removal of the deprecated power trace API from Paul Gortmaker.
- Assorted updates from Andreas Fleig, Colin Ian King,
Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei,
Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo,
Thomas Renninger, and Yasuaki Ishimatsu.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=wijn
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
- Rework of the ACPI namespace scanning code from Rafael J. Wysocki
with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
Toshi Kani, and Yinghai Lu.
- ACPI power resources handling and ACPI device PM update from Rafael
J Wysocki.
- ACPICA update to version 20130117 from Bob Moore and Lv Zheng with
contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner.
- Support for Intel Lynxpoint LPSS from Mika Westerberg.
- cpuidle update from Len Brown including Intel Haswell support, C1
state for intel_idle, removal of global pm_idle.
- cpuidle fixes and cleanups from Daniel Lezcano.
- cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with
contributions from Stratos Karafotis and Rickard Andersson.
- Intel P-states driver for Sandy Bridge processors from Dirk
Brandewie.
- cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.
- cpufreq fixes related to ordering issues between acpi-cpufreq and
powernow-k8 from Borislav Petkov and Matthew Garrett.
- cpufreq support for Calxeda Highbank processors from Mark Langsdorf
and Rob Herring.
- cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
from Shawn Guo.
- cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
and Inderpal Singh.
- Support for "lightweight suspend" from Zhang Rui.
- Removal of the deprecated power trace API from Paul Gortmaker.
- Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso,
Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu,
Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki
Ishimatsu.
* tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits)
PM idle: remove global declaration of pm_idle
unicore32 idle: delete stray pm_idle comment
openrisc idle: delete pm_idle
mn10300 idle: delete pm_idle
microblaze idle: delete pm_idle
m32r idle: delete pm_idle, and other dead idle code
ia64 idle: delete pm_idle
cris idle: delete idle and pm_idle
ARM64 idle: delete pm_idle
ARM idle: delete pm_idle
blackfin idle: delete pm_idle
sparc idle: rename pm_idle to sparc_idle
sh idle: rename global pm_idle to static sh_idle
x86 idle: rename global pm_idle to static x86_idle
APM idle: register apm_cpu_idle via cpuidle
cpufreq / intel_pstate: Add kernel command line option disable intel_pstate.
cpufreq / intel_pstate: Change to disallow module build
tools/power turbostat: display SMI count by default
intel_idle: export both C1 and C1E
ACPI / hotplug: Fix concurrency issues and memory leaks
...
Pull scheduler changes from Ingo Molnar:
"Main changes:
- scheduler side full-dynticks (user-space execution is undisturbed
and receives no timer IRQs) preparation changes that convert the
cputime accounting code to be full-dynticks ready, from Frederic
Weisbecker.
- Initial sched.h split-up changes, by Clark Williams
- select_idle_sibling() performance improvement by Mike Galbraith:
" 1 tbench pair (worst case) in a 10 core + SMT package:
pre 15.22 MB/sec 1 procs
post 252.01 MB/sec 1 procs "
- sched_rr_get_interval() ABI fix/change. We think this detail is not
used by apps (so it's not an ABI in practice), but lets keep it
under observation.
- misc RT scheduling cleanups, optimizations"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
sched/rt: Add <linux/sched/rt.h> header to <linux/init_task.h>
cputime: Remove irqsave from seqlock readers
sched, powerpc: Fix sched.h split-up build failure
cputime: Restore CPU_ACCOUNTING config defaults for PPC64
sched/rt: Move rt specific bits into new header file
sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice
sched: Move sched.h sysctl bits into separate header
sched: Fix signedness bug in yield_to()
sched: Fix select_idle_sibling() bouncing cow syndrome
sched/rt: Further simplify pick_rt_task()
sched/rt: Do not account zero delta_exec in update_curr_rt()
cputime: Safely read cputime of full dynticks CPUs
kvm: Prepare to add generic guest entry/exit callbacks
cputime: Use accessors to read task cputime stats
cputime: Allow dynamic switch between tick/virtual based cputime accounting
cputime: Generic on-demand virtual cputime accounting
cputime: Move default nsecs_to_cputime() to jiffies based cputime file
cputime: Librarize per nsecs resolution cputime definitions
cputime: Avoid multiplication overflow on utime scaling
context_tracking: Export context state for generic vtime
...
Fix up conflict in kernel/context_tracking.c due to comment additions.
Pull perf changes from Ingo Molnar:
"There are lots of improvements, the biggest changes are:
Main kernel side changes:
- Improve uprobes performance by adding 'pre-filtering' support, by
Oleg Nesterov.
- Make some POWER7 events available in sysfs, equivalent to what was
done on x86, from Sukadev Bhattiprolu.
- tracing updates by Steve Rostedt - mostly misc fixes and smaller
improvements.
- Use perf/event tracing to report PCI Express advanced errors, by
Tony Luck.
- Enable northbridge performance counters on AMD family 15h, by Jacob
Shin.
- This tracing commit:
tracing: Remove the extra 4 bytes of padding in events
changes the ABI. All involved parties (PowerTop in particular)
seem to agree that it's safe to do now with the introduction of
libtraceevent, but the devil is in the details ...
Main tooling side changes:
- Add 'event group view', from Namyung Kim:
To use it, 'perf record' should group events when recording. And
then perf report parses the saved group relation from file header
and prints them together if --group option is provided. You can
use the 'perf evlist' command to see event group information:
$ perf record -e '{ref-cycles,cycles}' noploop 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ]
$ perf evlist --group
{ref-cycles,cycles}
With this example, default perf report will show you each event
separately.
You can use --group option to enable event group view:
$ perf report --group
...
# group: {ref-cycles,cycles}
# ========
# Samples: 7K of event 'anon group { ref-cycles, cycles }'
# Event count (approx.): 6876107743
#
# Overhead Command Shared Object Symbol
# ................ ....... ................. ..........................
99.84% 99.76% noploop noploop [.] main
0.07% 0.00% noploop ld-2.15.so [.] strcmp
0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del
0.03% 0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu
0.02% 0.00% noploop [kernel.kallsyms] [k] account_user_time
0.01% 0.00% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask
0.00% 0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe
0.00% 0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock
0.00% 0.06% noploop [kernel.kallsyms] [k] find_get_page
0.00% 0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks
0.00% 0.02% noploop [kernel.kallsyms] [k] __current_kernel_time
As you can see the Overhead column now contains both of ref-cycles
and cycles and header line shows group information also - 'anon
group { ref-cycles, cycles }'. The output is sorted by period of
group leader first.
- Initial GTK+ annotate browser, from Namhyung Kim.
- Add option for runtime switching perf data file in perf report,
just press 's' and a menu with the valid files found in the current
directory will be presented, from Feng Tang.
- Add support to display whole group data for raw columns, from Jiri
Olsa.
- Add per processor socket count aggregation in perf stat, from
Stephane Eranian.
- Add interval printing in 'perf stat', from Stephane Eranian.
- 'perf test' improvements
- Add support for wildcards in tracepoint system name, from Jiri
Olsa.
- Add anonymous huge page recognition, from Joshua Zhu.
- perf build-id cache now can show DSOs present in a perf.data file
that are not in the cache, to integrate with build-id servers being
put in place by organizations such as Fedora.
- perf top now shares more of the evsel config/creation routines with
'record', paving the way for further integration like 'top'
snapshots, etc.
- perf top now supports DWARF callchains.
- Fix mmap limitations on 32-bit, fix from David Miller.
- 'perf bench numa mem' NUMA performance measurement suite
- ... and lots of fixes, performance improvements, cleanups and other
improvements I failed to list - see the shortlog and git log for
details."
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits)
perf/x86/amd: Enable northbridge performance counters on AMD family 15h
perf/hwbp: Fix cleanup in case of kzalloc failure
perf tools: Fix build with bison 2.3 and older.
perf tools: Limit unwind support to x86 archs
perf annotate: Make it to be able to skip unannotatable symbols
perf gtk/annotate: Fail early if it can't annotate
perf gtk/annotate: Show source lines with gray color
perf gtk/annotate: Support multiple event annotation
perf ui/gtk: Implement basic GTK2 annotation browser
perf annotate: Fix warning message on a missing vmlinux
perf buildid-cache: Add --update option
uprobes/perf: Avoid uprobe_apply() whenever possible
uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE
uprobes/perf: Teach trace_uprobe/perf code to pre-filter
uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's
uprobes: Introduce uprobe_apply()
perf: Introduce hw_perf_event->tp_target and ->tp_list
uprobes/perf: Always increment trace_uprobe->nhit
uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe
uprobes/tracing: Introduce is_trace_uprobe_enabled()
...
Commit: c1bf08ac "ftrace: Be first to run code modification on modules"
changed ftrace module notifier's priority to INT_MAX in order to
process the ftrace nops before anything else could touch them
(namely kprobes). This was the correct thing to do.
Unfortunately, the ftrace module notifier also contains the ftrace
clean up code. As opposed to the set up code, this code should be
run *after* all the module notifiers have run in case a module is doing
correct clean-up and unregisters its ftrace hooks. Basically, ftrace
needs to do clean up on module removal, as it needs to know about code
being removed so that it doesn't try to modify that code. But after it
removes the module from its records, if a ftrace user tries to remove
a probe, that removal will fail due as the record of that code segment
no longer exists.
Nothing really bad happens if the probe removal is called after ftrace
did the clean up, but the ftrace removal function will return an error.
Correct code (such as kprobes) will produce a WARN_ON() if it fails
to remove the probe. As people get annoyed by frivolous warnings, it's
best to do the ftrace clean up after everything else.
By splitting the ftrace_module_notifier into two notifiers, one that
does the module load setup that is run at high priority, and the other
that is called for module clean up that is run at low priority, the
problem is solved.
Cc: stable@vger.kernel.org
Reported-by: Frank Ch. Eigler <fche@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing of ia32 compat system calls has been a bit of a pain as they
use different system call numbers than the 64bit equivalents.
I wrote a simple 'lls' program that lists files. I compiled it as a i686
ELF binary and ran it under a x86_64 box. This is the result:
echo 0 > /debug/tracing/tracing_on
echo 1 > /debug/tracing/events/syscalls/enable
echo 1 > /debug/tracing/tracing_on ; ./lls ; echo 0 > /debug/tracing/tracing_on
grep lls /debug/tracing/trace
[.. skipping calls before TS_COMPAT is set ...]
lls-1127 [005] d... 936.409188: sys_recvfrom(fd: 0, ubuf: 4d560fc4, size: 0, flags: 8048034, addr: 8, addr_len: f7700420)
lls-1127 [005] d... 936.409190: sys_recvfrom -> 0x8a77000
lls-1127 [005] d... 936.409211: sys_lgetxattr(pathname: 0, name: 1000, value: 3, size: 22)
lls-1127 [005] d... 936.409215: sys_lgetxattr -> 0xf76ff000
lls-1127 [005] d... 936.409223: sys_dup2(oldfd: 4d55ae9b, newfd: 4)
lls-1127 [005] d... 936.409228: sys_dup2 -> 0xfffffffffffffffe
lls-1127 [005] d... 936.409236: sys_newfstat(fd: 4d55b085, statbuf: 80000)
lls-1127 [005] d... 936.409242: sys_newfstat -> 0x3
lls-1127 [005] d... 936.409243: sys_removexattr(pathname: 3, name: ffcd0060)
lls-1127 [005] d... 936.409244: sys_removexattr -> 0x0
lls-1127 [005] d... 936.409245: sys_lgetxattr(pathname: 0, name: 19614, value: 1, size: 2)
lls-1127 [005] d... 936.409248: sys_lgetxattr -> 0xf76e5000
lls-1127 [005] d... 936.409248: sys_newlstat(filename: 3, statbuf: 19614)
lls-1127 [005] d... 936.409249: sys_newlstat -> 0x0
lls-1127 [005] d... 936.409262: sys_newfstat(fd: f76fb588, statbuf: 80000)
lls-1127 [005] d... 936.409279: sys_newfstat -> 0x3
lls-1127 [005] d... 936.409279: sys_close(fd: 3)
lls-1127 [005] d... 936.421550: sys_close -> 0x200
lls-1127 [005] d... 936.421558: sys_removexattr(pathname: 3, name: ffcd00d0)
lls-1127 [005] d... 936.421560: sys_removexattr -> 0x0
lls-1127 [005] d... 936.421569: sys_lgetxattr(pathname: 4d564000, name: 1b1abc, value: 5, size: 802)
lls-1127 [005] d... 936.421574: sys_lgetxattr -> 0x4d564000
lls-1127 [005] d... 936.421575: sys_capget(header: 4d70f000, dataptr: 1000)
lls-1127 [005] d... 936.421580: sys_capget -> 0x0
lls-1127 [005] d... 936.421580: sys_lgetxattr(pathname: 4d710000, name: 3000, value: 3, size: 812)
lls-1127 [005] d... 936.421589: sys_lgetxattr -> 0x4d710000
lls-1127 [005] d... 936.426130: sys_lgetxattr(pathname: 4d713000, name: 2abc, value: 3, size: 32)
lls-1127 [005] d... 936.426141: sys_lgetxattr -> 0x4d713000
lls-1127 [005] d... 936.426145: sys_newlstat(filename: 3, statbuf: f76ff3f0)
lls-1127 [005] d... 936.426146: sys_newlstat -> 0x0
lls-1127 [005] d... 936.431748: sys_lgetxattr(pathname: 0, name: 1000, value: 3, size: 22)
Obviously I'm not calling newfstat with a fd of 4d55b085. The calls are
obviously incorrect, and confusing.
Other efforts have been made to fix this:
https://lkml.org/lkml/2012/3/26/367
But the real solution is to rewrite the syscall internals and come up
with a fixed solution. One that doesn't require all the kluge that the
current solution has.
Thus for now, instead of outputting incorrect data, simply ignore them.
With this patch the changes now have:
#> grep lls /debug/tracing/trace
#>
Compat system calls simply are not traced. If users need compat
syscalls, then they should just use the raw syscall tracepoints.
For an architecture to make their compat syscalls ignored, it must
define ARCH_TRACE_IGNORE_COMPAT_SYSCALLS (done in asm/ftrace.h) and also
define an arch_trace_is_compat_syscall() function that will return true
if the current task should ignore tracing the syscall.
I want to stress that this change does not affect actual syscalls in any
way, shape or form. It is only used within the tracing system and
doesn't interfere with the syscall logic at all. The changes are
consolidated nicely into trace_syscalls.c and asm/ftrace.h.
I had to make one small modification to asm/thread_info.h and that was
to remove the include of asm/ftrace.h. As asm/ftrace.h required the
current_thread_info() it was causing include hell. That include was
added back in 2008 when the function graph tracer was added:
commit caf4b323 "tracing, x86: add low level support for ftrace return tracing"
It does not need to be included there.
Link: http://lkml.kernel.org/r/1360703939.21867.99.camel@gandalf.local.home
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
uprobe_perf_open/close call the costly uprobe_apply() every time,
we can avoid it if:
- "nr_systemwide != 0" is not changed.
- There is another process/thread with the same ->mm.
- copy_proccess() does inherit_event(). dup_mmap() preserves the
inserted breakpoints.
- event->attr.enable_on_exec == T, we can rely on uprobe_mmap()
called by exec/mmap paths.
- tp_target is exiting. Only _close() checks PF_EXITING, I don't
think TRACE_REG_PERF_OPEN can hit the dying task too often.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Change uprobe_trace_func() and uprobe_perf_func() to return "int". Change
uprobe_dispatcher() to return "trace_ret | perf_ret" although this is not
needed, currently TP_FLAG_TRACE/TP_FLAG_PROFILE are mutually exclusive.
The only functional change is that uprobe_perf_func() checks the filtering
too and returns UPROBE_HANDLER_REMOVE if nobody wants to trace current.
Testing:
# perf probe -x /lib/libc.so.6 syscall
# perf record -e probe_libc:syscall -i perl -e 'fork; syscall -1 for 1..10; wait'
# perf report --show-total-period
100.00% 10 perl libc-2.8.so [.] syscall
Before this patch:
# cat /sys/kernel/debug/tracing/uprobe_profile
/lib/libc.so.6 syscall 20
A child process doesn't have a counter, but still it hits this breakoint
"copied" by dup_mmap().
After the patch:
# cat /sys/kernel/debug/tracing/uprobe_profile
/lib/libc.so.6 syscall 11
The child process hits this int3 only once and does unapply_uprobe().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Finally implement uprobe_perf_filter() which checks ->nr_systemwide or
->perf_events to figure out whether we need to insert the breakpoint.
uprobe_perf_open/close are changed to do uprobe_apply(true/false) when
the new perf event comes or goes away.
Note that currently this is very suboptimal:
- uprobe_register() called by TRACE_REG_PERF_REGISTER becomes a
heavy nop, consumer->filter() always returns F at this stage.
As it was already discussed we need uprobe_register_only() to
avoid the costly register_for_each_vma() when possible.
- uprobe_apply() is oftenly overkill. Unless "nr_systemwide != 0"
changes we need uprobe_apply_mm(), unapply_uprobe() is almost
what we need.
- uprobe_apply() can be simply avoided sometimes, see the next
changes.
Testing:
# perf probe -x /lib/libc.so.6 syscall
# perl -e 'syscall -1 while 1' &
[1] 530
# perf record -e probe_libc:syscall perl -e 'syscall -1 for 1..10; sleep 1'
# perf report --show-total-period
100.00% 10 perl libc-2.8.so [.] syscall
Before this patch:
# cat /sys/kernel/debug/tracing/uprobe_profile
/lib/libc.so.6 syscall 79291
A huge ->nrhit == 79291 reflects the fact that the background process
530 constantly hits this breakpoint too, even if doesn't contribute to
the output.
After the patch:
# cat /sys/kernel/debug/tracing/uprobe_profile
/lib/libc.so.6 syscall 10
This shows that only the target process was punished by int3.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Introduce "struct trace_uprobe_filter" which records the "active"
perf_event's attached to ftrace_event_call. For the start we simply
use list_head, we can optimize this later if needed. For example, we
do not really need to record an event with ->parent != NULL, we can
rely on parent->child_list. And we can certainly do some optimizations
for the case when 2 events have the same ->tp_target or tp_target->mm.
Change trace_uprobe_register() to process TRACE_REG_PERF_OPEN/CLOSE
and add/del this perf_event to the list.
We can probably avoid any locking, but lets start with the "obvioulsy
correct" trace_uprobe_filter->rwlock which protects everything.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Move tu->nhit++ from uprobe_trace_func() to uprobe_dispatcher().
->nhit counts how many time we hit the breakpoint inserted by this
uprobe, we do not want to loose this info if uprobe was enabled by
sys_perf_event_open().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
trace_uprobe->consumer and "struct uprobe_trace_consumer" add the
unnecessary indirection and complicate the code for no reason.
This patch simply embeds uprobe_consumer into "struct trace_uprobe",
all other changes only fix the compilation errors.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
probe_event_enable/disable() check tu->consumer != NULL to avoid the
wrong uprobe_register/unregister().
We are going to kill this pointer and "struct uprobe_trace_consumer",
so we add the new helper, is_trace_uprobe_enabled(), which can rely
on TP_FLAG_TRACE/TP_FLAG_PROFILE instead.
Note: the current logic doesn't look optimal, it is not clear why
TP_FLAG_TRACE/TP_FLAG_PROFILE are mutually exclusive, we will probably
change this later.
Also kill the unused TP_FLAG_UPROBE.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
probe_event_enable/disable() check tu->inode != NULL at the start.
This is ugly, if igrab() can fail create_trace_uprobe() should not
succeed and "postpone" the failure.
And S_ISREG(inode->i_mode) check added by d24d7dbf is not safe.
Note: alloc_uprobe() should probably check igrab() != NULL as well.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
probe_event_enable() does uprobe_register() and only after that sets
utc->tu and tu->consumer/flags. This can race with uprobe_dispatcher()
which can miss these assignments or see them out of order. Nothing
really bad can happen, but this doesn't look clean/safe.
And this does not allow to use uprobe_consumer->filter() we are going
to add, it is called by uprobe_register() and it needs utc->tu.
Change this code to initialize everything before uprobe_register(), and
reset tu->consumer/flags if it fails. We can't race with event_disable(),
the caller holds event_mutex, and if we could the code would be wrong
anyway.
In fact I think uprobe_trace_consumer should die, it buys nothing but
complicates the code. We can simply add uprobe_consumer into trace_uprobe.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
create_trace_uprobe() does kern_path() to find ->d_inode, but forgets
to do path_put(). We can do this right after igrab().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Change handle_swbp() to set regs->ip = bp_vaddr in advance, this is
what consumer->handler() needs but uprobe_get_swbp_addr() is not
exported.
This also simplifies the code and makes it more consistent across
the supported architectures. handle_swbp() becomes the only caller
of uprobe_get_swbp_addr().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
uprobe_consumer->filter() is pointless in its current form, kill it.
We will add it back, but with the different signature/semantics. Perhaps
we will even re-introduce the callsite in handler_chain(), but not to
just skip uc->handler().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Move rt scheduler definitions out of include/linux/sched.h into
new file include/linux/sched/rt.h
Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20130207094707.7b9f825f@riff.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On early boot up, when the ftrace ring buffer is initialized, the
static variable current_trace is initialized to &nop_trace.
Before this initialization, current_trace is NULL and will never
become NULL again. It is always reassigned to a ftrace tracer.
Several places check if current_trace is NULL before it uses
it, and this check is frivolous, because at the point in time
when the checks are made the only way current_trace could be
NULL is if ftrace failed its allocations at boot up, and the
paths to these locations would probably not be possible.
By initializing current_trace to &nop_trace where it is declared,
current_trace will never be NULL, and we can remove all these
checks of current_trace being NULL which never needed to be
checked in the first place.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Ftrace has a snapshot feature available from kernel space and
latency tracers (e.g. irqsoff) are using it. This patch enables
user applictions to take a snapshot via debugfs.
Add "snapshot" debugfs file in "tracing" directory.
snapshot:
This is used to take a snapshot and to read the output of the
snapshot.
# echo 1 > snapshot
This will allocate the spare buffer for snapshot (if it is
not allocated), and take a snapshot.
# cat snapshot
This will show contents of the snapshot.
# echo 0 > snapshot
This will free the snapshot if it is allocated.
Any other positive values will clear the snapshot contents if
the snapshot is allocated, or return EINVAL if it is not allocated.
Link: http://lkml.kernel.org/r/20121226025300.3252.86850.stgit@liselsia
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
[
Fixed irqsoff selftest and also a conflict with a change
that fixes the update_max_tr.
]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the trace buffer read functions use a static variable
"old_tracer" for detecting if the current tracer changes. This
was suitable for a single trace file ("trace"), but to add a
snapshot feature that will use the same function for its file,
a check against a static variable is not sufficient.
To use the output functions for two different files, instead of
storing the current tracer in a static variable, as the trace
iterator descriptor contains a pointer to the original current
tracer's name, that pointer can now be used to check if the
current tracer has changed between different reads of the trace
file.
Link: http://lkml.kernel.org/r/20121226025252.3252.9276.stgit@liselsia
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For systems with an unstable sched_clock, all cpu_clock() does is enable/
disable local irq during the call to sched_clock_cpu(). And for stable
systems they are same.
trace_clock_global() already disables interrupts, so it can call
sched_clock_cpu() directly.
Link: http://lkml.kernel.org/r/1356576585-28782-2-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a stat about the number of events read from the ring buffer:
# cat /debug/tracing/per_cpu/cpu0/stats
entries: 39869
overrun: 870512
commit overrun: 0
bytes: 1449912
oldest event ts: 6561.368690
now ts: 6565.246426
dropped events: 0
read events: 112 <-- Added
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
While debugging the virtual cputime with the function graph tracer
with a max_depth of 1 (most common use of the max_depth so far),
I found that I was missing kernel execution because of a race condition.
The code for the return side of the function has a slight race:
ftrace_pop_return_trace(&trace, &ret, frame_pointer);
trace.rettime = trace_clock_local();
ftrace_graph_return(&trace);
barrier();
current->curr_ret_stack--;
The ftrace_pop_return_trace() initializes the trace structure for
the callback. The ftrace_graph_return() uses the trace structure
for its own use as that structure is on the stack and is local
to this function. Then the curr_ret_stack is decremented which
is what the trace.depth is set to.
If an interrupt comes in after the ftrace_graph_return() but
before the curr_ret_stack, then the called function will get
a depth of 2. If max_depth is set to 1 this function will be
ignored.
The problem is that the trace has already been called, and the
timestamp for that trace will not reflect the time the function
was about to re-enter userspace. Calls to the interrupt will not
be traced because the max_depth has prevented this.
To solve this issue, the ftrace_graph_return() can safely be
moved after the current->curr_ret_stack has been updated.
This way the timestamp for the return callback will reflect
the actual time.
If an interrupt comes in after the curr_ret_stack update and
ftrace_graph_return(), it will be traced. It may look a little
confusing to see it within the other function, but at least
it will not be lost.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
__this_cpu_inc_return() or __this_cpu_dec generates a single instruction,
which is faster than __get_cpu_var operation.
Link: http://lkml.kernel.org/r/50A9C1BD.1060308@gmail.com
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Shan Wei <davidshan@tencent.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The text in Documentation said it would be removed in 2.6.41;
the text in the Kconfig said removal in the 3.1 release. Either
way you look at it, we are well past both, so push it off a cliff.
Note that the POWER_CSTATE and the POWER_PSTATE are part of the
legacy tracing API. Remove all tracepoints which use these flags.
As can be seen from context, most already have a trace entry via
trace_cpu_idle anyways.
Also, the cpufreq/cpufreq.c PSTATE one is actually unpaired, as
compared to the CSTATE ones which all have a clear start/stop.
As part of this, the trace_power_frequency also becomes orphaned,
so it too is deleted.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Dan's smatch found a compare bug with the result of the
trace_test_and_set_recursion() and comparing to less than
zero. If the function fails, it returns -1, but was saved in
an unsigned int, which will never be less than zero and will
ignore the result of the test if a recursion did happen.
Luckily this is the last of the recursion tests, as the
infrastructure of ftrace would catch recursions before it
got here, except for some few exceptions.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ring_buffer.c use to require declarations from trace.h, but
these have moved to the generic header files. There's nothing
in trace.h that ring_buffer.c requires.
There's some headers that trace.h included that ring_buffer.c
needs, but it's best that it includes them directly, and not
include trace.h.
Also, some things may use ring_buffer.c without having tracing
configured. This removes the dependency that may come in the
future.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Using context bit recursion checking, we can help increase the
performance of the ring buffer.
Before this patch:
# echo function > /debug/tracing/current_tracer
# for i in `seq 10`; do ./hackbench 50; done
Time: 10.285
Time: 10.407
Time: 10.243
Time: 10.372
Time: 10.380
Time: 10.198
Time: 10.272
Time: 10.354
Time: 10.248
Time: 10.253
(average: 10.3012)
Now we have:
# echo function > /debug/tracing/current_tracer
# for i in `seq 10`; do ./hackbench 50; done
Time: 9.712
Time: 9.824
Time: 9.861
Time: 9.827
Time: 9.962
Time: 9.905
Time: 9.886
Time: 10.088
Time: 9.861
Time: 9.834
(average: 9.876)
a 4% savings!
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracer had two different versions of function tracing.
The disabling of irqs version and the preempt disable version.
As function tracing in very intrusive and can cause nasty recursion
issues, it has its own recursion protection. But the old method to
do this was a flat layer. If it detected that a recursion was happening
then it would just return without recording.
This made the preempt version (much faster than the irq disabling one)
not very useful, because if an interrupt were to occur after the
recursion flag was set, the interrupt would not be traced at all,
because every function that was traced would think it recursed on
itself (due to the context it preempted setting the recursive flag).
Now that we have a recursion flag for every context level, we
no longer need to worry about that. We can disable preemption,
set the current context recursion check bit, and go on. If an
interrupt were to come along, it would check its own context bit
and happily continue to trace.
As the preempt version is faster than the irq disable version,
there's no more reason to keep the preempt version around.
And the irq disable version still had an issue with missing
out on tracing NMI code.
Remove the irq disable function tracer version and have the
preempt disable version be the default (and only version).
Before this patch we had from running:
# echo function > /debug/tracing/current_tracer
# for i in `seq 10`; do ./hackbench 50; done
Time: 12.028
Time: 11.945
Time: 11.925
Time: 11.964
Time: 12.002
Time: 11.910
Time: 11.944
Time: 11.929
Time: 11.941
Time: 11.924
(average: 11.9512)
Now we have:
# echo function > /debug/tracing/current_tracer
# for i in `seq 10`; do ./hackbench 50; done
Time: 10.285
Time: 10.407
Time: 10.243
Time: 10.372
Time: 10.380
Time: 10.198
Time: 10.272
Time: 10.354
Time: 10.248
Time: 10.253
(average: 10.3012)
a 13.8% savings!
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When function tracing occurs, the following steps are made:
If arch does not support a ftrace feature:
call internal function (uses INTERNAL bits) which calls...
If callback is registered to the "global" list, the list
function is called and recursion checks the GLOBAL bits.
then this function calls...
The function callback, which can use the FTRACE bits to
check for recursion.
Now if the arch does not suppport a feature, and it calls
the global list function which calls the ftrace callback
all three of these steps will do a recursion protection.
There's no reason to do one if the previous caller already
did. The recursion that we are protecting against will
go through the same steps again.
To prevent the multiple recursion checks, if a recursion
bit is set that is higher than the MAX bit of the current
check, then we know that the check was made by the previous
caller, and we can skip the current check.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently for recursion checking in the function tracer, ftrace
tests a task_struct bit to determine if the function tracer had
recursed or not. If it has, then it will will return without going
further.
But this leads to races. If an interrupt came in after the bit
was set, the functions being traced would see that bit set and
think that the function tracer recursed on itself, and would return.
Instead add a bit for each context (normal, softirq, irq and nmi).
A check of which context the task is in is made before testing the
associated bit. Now if an interrupt preempts the function tracer
after the previous context has been set, the interrupt functions
can still be traced.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There is lots of places that perform:
op = rcu_dereference_raw(ftrace_control_list);
while (op != &ftrace_list_end) {
Add a helper macro to do this, and also optimize for a single
entity. That is, gcc will optimize a loop for either no iterations
or more than one iteration. But usually only a single callback
is registered to the function tracer, thus the optimized case
should be a single pass. to do this we now do:
op = rcu_dereference_raw(list);
do {
[...]
} while (likely(op = rcu_dereference_raw((op)->next)) &&
unlikely((op) != &ftrace_list_end));
An op is always registered (ftrace_list_end when no callbacks is
registered), thus when a single callback is registered, the link
list looks like:
top => callback => ftrace_list_end => NULL.
The likely(op = op->next) still must be performed due to the race
of removing the callback, where the first op assignment could
equal ftrace_list_end. In that case, the op->next would be NULL.
But this is unlikely (only happens in a race condition when
removing the callback).
But it is very likely that the next op would be ftrace_list_end,
unless more than one callback has been registered. This tells
gcc what the most common case is and makes the fast path with
the least amount of branches.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracing recursion self test should not crash
the machine if the resursion test fails. If it detects that
the function tracing is recursing when it should not be, then
bail, don't go into an infinite recursive loop.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If one of the function tracers set by the global ops is not recursion
safe, it can still be called directly without the added recursion
supplied by the ftrace infrastructure.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The test that checks function recursion does things differently
if the arch does not support all ftrace features. But that really
doesn't make a difference with how the test runs, and either way
the count variable should be 2 at the end.
Currently the test wrongly fails for archs that don't support all
the ftrace features.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a race condition between the setting of a new tracer and
the update of the max trace buffers (the swap). When a new tracer
is added, it sets current_trace to nop_trace before disabling
the old tracer. At this moment, if the old tracer uses update_max_tr(),
the update may trigger the warning against !current_trace->use_max-tr,
as nop_trace doesn't have that set.
As update_max_tr() requires that interrupts be disabled, we can
add a check to see if current_trace == nop_trace and bail if it
does. Then when disabling the current_trace, set it to nop_trace
and run synchronize_sched(). This will make sure all calls to
update_max_tr() have completed (it was called with interrupts disabled).
As a clean up, this commit also removes shrinking and recreating
the max_tr buffer if the old and new tracers both have use_max_tr set.
The old way use to always shrink the buffer, and then expand it
for the next tracer. This is a waste of time.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As trace_clock is used by other things besides tracing, and it
does not require anything from trace.h, it is best not to include
the header file in trace_clock.c.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Due to a userspace issue with PowerTop v2beta, which hardcoded
the offset of event fields that it was using, it broke when
we removed the Big Kernel Lock counter from the event header.
(commit e6e1e2593 "tracing: Remove lock_depth from event entry")
Because this broke userspace, it was determined that we must
keep those 4 bytes around.
(commit a3a4a5acd "Regression: partial revert "tracing: Remove lock_depth from event entry"")
This unfortunately wastes space in the ring buffer. 4 bytes per
event, where a lot of events are just 24 bytes. That's 16% of the
buffer wasted. A million events will add 4 megs of white space
into the buffer.
It was later noticed that PowerTop v2beta could not work on systems
where the kernel was 64 bit but the userspace was 32 bits.
The reason was because the offsets are different between the
two and the hard coded offset of one would not work with the other.
With PowerTop v2 final, it implemented the same interface that both
perf and trace-cmd use. That is, it reads the format file of
the event to find the offsets of the fields it needs. This fixes
the problem with running powertop on a 32 bit userspace running
on a 64 bit kernel. It also no longer requires the 4 byte padding.
As PowerTop v2 has been out for a while, and is included in all
major distributions, it is time that we can safely remove the
4 bytes of padding. Users of PowerTop v2beta should upgrade to
PowerTop v2 final.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move SAVE_REGS support flag into Kconfig and rename
it to CONFIG_DYNAMIC_FTRACE_WITH_REGS. This also introduces
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS which indicates
the architecture depending part of ftrace has a code
that saves full registers.
On the other hand, CONFIG_DYNAMIC_FTRACE_WITH_REGS indicates
the code is enabled.
Link: http://lkml.kernel.org/r/20120928081516.3560.72534.stgit@ltc138.sdl.hitachi.co.jp
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the file max_graph_depth to the debug tracing directory that lets
the user define the depth of the function graph.
A very useful operation is to set the depth to 1. Then it traces only
the first function that is called when entering the kernel. This can
be used to determine what system operations interrupt a process.
For example, to work on NOHZ processes (single tasks running without
a timer tick), if any interrupt goes off and preempts that task, this
code will show it happening.
# cd /sys/kernel/debug/tracing
# echo 1 > max_graph_depth
# echo function_graph > current_tracer
# cat per_cpu/cpu/<cpu-of-process>/trace
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's now a check in tracing_reset_online_cpus() if the buffer is
allocated or NULL. No need to do a check before calling it with max_tr.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
max_tr->buffer could be NULL in the tracing_reset{_online_cpus}. In this
case, a NULL pointer dereference happens, so we should return immediately
from these functions.
Note, the current code does not call tracing_reset*() with max_tr when
its buffer is NULL, but future code will. This patch is needed to prevent
the future code from crashing.
Link: http://lkml.kernel.org/r/20121219070234.31200.93863.stgit@liselsia
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some functions in the syscall tracing is used only locally to
the file, but they are labeled global. Convert them to static functions.
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Without this patch, we can register a uprobe event for a directory.
Enabling such a uprobe event would anyway fail.
Example:
$ echo 'p /bin:0x4245c0' > /sys/kernel/debug/tracing/uprobe_events
However dirctories cannot be valid targets for uprobe.
Hence verify if the target is a regular file during the probe
registration.
Link: http://lkml.kernel.org/r/20130103004212.690763002@goodmis.org
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
[ cleaned up whitespace and removed redundant IS_DIR() check ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
typeof(&buffer) is a pointer to array of 1024 char, or char (*)[1024].
But, typeof(&buffer[0]) is a pointer to char which match the return type of get_trace_buf().
As well-known, the value of &buffer is equal to &buffer[0].
so return this_cpu_ptr(&percpu_buffer->buffer[0]) can avoid type cast.
Link: http://lkml.kernel.org/r/50A1A800.3020102@gmail.com
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Shan Wei <davidshan@tencent.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The original ring-buffer code had special checks at the start
of rb_advance_iter() and instead of repeating them again at the
end of the function if a certain condition existed, I just did
a recursive call to rb_advance_iter() because the special condition
would cause rb_advance_iter() to return early (after the checks).
But as things have changed, the special checks no longer exist
and the only thing done for the special_condition is to call
rb_inc_iter() and return. Instead of doing a confusing recursive call,
just call rb_inc_iter instead.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If some other kernel subsystem has a module notifier, and adds a kprobe
to a ftrace mcount point (now that kprobes work on ftrace points),
when the ftrace notifier runs it will fail and disable ftrace, as well
as kprobes that are attached to ftrace points.
Here's the error:
WARNING: at kernel/trace/ftrace.c:1618 ftrace_bug+0x239/0x280()
Hardware name: Bochs
Modules linked in: fat(+) stap_56d28a51b3fe546293ca0700b10bcb29__8059(F) nfsv4 auth_rpcgss nfs dns_resolver fscache xt_nat iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack lockd sunrpc ppdev parport_pc parport microcode virtio_net i2c_piix4 drm_kms_helper ttm drm i2c_core [last unloaded: bid_shared]
Pid: 8068, comm: modprobe Tainted: GF 3.7.0-0.rc8.git0.1.fc19.x86_64 #1
Call Trace:
[<ffffffff8105e70f>] warn_slowpath_common+0x7f/0xc0
[<ffffffff81134106>] ? __probe_kernel_read+0x46/0x70
[<ffffffffa0180000>] ? 0xffffffffa017ffff
[<ffffffffa0180000>] ? 0xffffffffa017ffff
[<ffffffff8105e76a>] warn_slowpath_null+0x1a/0x20
[<ffffffff810fd189>] ftrace_bug+0x239/0x280
[<ffffffff810fd626>] ftrace_process_locs+0x376/0x520
[<ffffffff810fefb7>] ftrace_module_notify+0x47/0x50
[<ffffffff8163912d>] notifier_call_chain+0x4d/0x70
[<ffffffff810882f8>] __blocking_notifier_call_chain+0x58/0x80
[<ffffffff81088336>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff810c2a23>] sys_init_module+0x73/0x220
[<ffffffff8163d719>] system_call_fastpath+0x16/0x1b
---[ end trace 9ef46351e53bbf80 ]---
ftrace failed to modify [<ffffffffa0180000>] init_once+0x0/0x20 [fat]
actual: cc:bb:d2:4b:e1
A kprobe was added to the init_once() function in the fat module on load.
But this happened before ftrace could have touched the code. As ftrace
didn't run yet, the kprobe system had no idea it was a ftrace point and
simply added a breakpoint to the code (0xcc in the cc:bb:d2:4b:e1).
Then when ftrace went to modify the location from a call to mcount/fentry
into a nop, it didn't see a call op, but instead it saw the breakpoint op
and not knowing what to do with it, ftrace shut itself down.
The solution is to simply give the ftrace module notifier the max priority.
This should have been done regardless, as the core code ftrace modification
also happens very early on in boot up. This makes the module modification
closer to core modification.
Link: http://lkml.kernel.org/r/20130107140333.593683061@goodmis.org
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reported-by: Frank Ch. Eigler <fche@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 0fb9656d "tracing: Make tracing_enabled be equal to tracing_on"
changes the behaviour of trace_pipe, ie. it makes trace_pipe return if
we've read something and tracing is enabled, and this means that we have
to 'cat trace_pipe' again and again while running tests.
IMO the right way is if tracing is enabled, we always block and wait for
ring buffer, or we may lose what we want since ring buffer's size is limited.
Link: http://lkml.kernel.org/r/1358132051-5410-1-git-send-email-bo.li.liu@oracle.com
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
bio_{front|back}_merge tracepoints report a bio merging into an
existing request but didn't specify which request the bio is being
merged into. Add @req to it. This makes it impossible to share the
event template with block_bio_queue - split it out.
@req isn't used or exported to userland at this point and there is no
userland visible behavior change. Later changes will make use of the
extra parameter.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio completion didn't kick block_bio_complete TP. Only dm was
explicitly triggering the TP on IO completion. This makes
block_bio_complete TP useless for tracers which want to know about
bios, and all other bio based drivers skip generating blktrace
completion events.
This patch makes all bio completions via bio_endio() generate
block_bio_complete TP.
* Explicit trace_block_bio_complete() invocation removed from dm and
the trace point is unexported.
* @rq dropped from trace_block_bio_complete(). bios may fly around
w/o queue associated. Verifying and accessing the assocaited queue
belongs to TP probes.
* blktrace now gets both request and bio completions. Make it ignore
bio completions if request completion path is happening.
This makes all bio based drivers generate blktrace completion events
properly and makes the block_bio_complete TP actually useful.
v2: With this change, block_bio_complete TP could be invoked on sg
commands which have bio's with %NULL bi_bdev. Update TP
assignment code to check whether bio->bi_bdev is %NULL before
dereferencing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Original-patch-by: Namhyung Kim <namhyung@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 02404baf1b "tracing: Remove deprecated tracing_enabled file"
removed the tracing_enabled file as it never worked properly and
the tracing_on file should be used instead. But the tracing_on file
didn't call into the tracers start/stop routines like the
tracing_enabled file did. This caused trace-cmd to break when it
enabled the irqsoff tracer.
If you just did "echo irqsoff > current_tracer" then it would work
properly. But the tool trace-cmd disables tracing first by writing
"0" into the tracing_on file. Then it writes "irqsoff" into
current_tracer and then writes "1" into tracing_on. Unfortunately,
the above commit changed the irqsoff tracer to check the tracing_on
status instead of the tracing_enabled status. If it's disabled then
it does not start the tracer internals.
The problem is that writing "1" into tracing_on does not call the
tracers "start" routine like writing "1" into tracing_enabled did.
This makes the irqsoff tracer not start when using the trace-cmd
tool, and is a regression for userspace.
Simple fix is to have the tracing_on file call the tracers start()
method when being enabled (and the stop() method when disabled).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latest change to allow trace options to be set on the command
line also broke the trace_options file.
The zeroing of the last byte of the option name that is echoed into
the trace_option file was removed with the consolidation of some
of the code. The compare between the option and what was written to
the trace_options file fails because the string holding the data
written doesn't terminate with a null character.
A zero needs to be added to the end of the string copied from
user space.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The rcutorture tests need to be able to trace the time of the
beginning of an RCU read-side critical section, and thus need access
to trace_clock_local(). This commit therefore adds a the needed
EXPORT_SYMBOL_GPL().
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Pull minor tracing updates and fixes from Steven Rostedt:
"It seems that one of my old pull requests have slipped through.
The changes are contained to just the files that I maintain, and are
changes from others that I told I would get into this merge window.
They have already been in linux-next for several weeks, and should be
well tested."
* 'tip/perf/core-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Remove unnecessary WARN_ONCE's from tracing_buffers_splice_read
tracing: Remove unneeded checks from the stack tracer
tracing: Add a resize function to make one buffer equivalent to another buffer
But the kernel decided to call it "origin" instead. Fix most of the
sites.
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull trivial branch from Jiri Kosina:
"Usual stuff -- comment/printk typo fixes, documentation updates, dead
code elimination."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
HOWTO: fix double words typo
x86 mtrr: fix comment typo in mtrr_bp_init
propagate name change to comments in kernel source
doc: Update the name of profiling based on sysfs
treewide: Fix typos in various drivers
treewide: Fix typos in various Kconfig
wireless: mwifiex: Fix typo in wireless/mwifiex driver
messages: i2o: Fix typo in messages/i2o
scripts/kernel-doc: check that non-void fcts describe their return value
Kernel-doc: Convention: Use a "Return" section to describe return values
radeon: Fix typo and copy/paste error in comments
doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
various: Fix spelling of "asynchronous" in comments.
Fix misspellings of "whether" in comments.
eisa: Fix spelling of "asynchronous".
various: Fix spelling of "registered" in comments.
doc: fix quite a few typos within Documentation
target: iscsi: fix comment typos in target/iscsi drivers
treewide: fix typo of "suport" in various comments and Kconfig
treewide: fix typo of "suppport" in various comments
...
Pull perf fixes from Ingo Molnar:
"These are late-v3.7 pending fixes for tracing."
Fix up trivial conflict in kernel/trace/ring_buffer.c: the NULL pointer
fix clashed with the change of type of the 'ret' variable.
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ring-buffer: Fix race between integrity check and readers
ring-buffer: Fix NULL pointer if rb_set_head_page() fails
ftrace: Clear bits properly in reset_iter_read()
I've legally changed my name with New York State, the US Social Security
Administration, et al. This patch propagates the name change and change
in initials and login to comments in the kernel source as well.
Signed-off-by: Nadia Yvette Chambers <nyc@holomorphy.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The function rb_check_pages() was added to make sure the ring buffer's
pages were sane. This check is done when the ring buffer size is modified
as well as when the iterator is released (closing the "trace" file),
as that was considered a non fast path and a good place to do a sanity
check.
The problem is that the check does not have any locks around it.
If one process were to read the trace file, and another were to read
the raw binary file, the check could happen while the reader is reading
the file.
The issues with this is that the check requires to clear the HEAD page
before doing the full check and it restores it afterward. But readers
require the HEAD page to exist before it can read the buffer, otherwise
it gives a nasty warning and disables the buffer.
By adding the reader lock around the check, this keeps the race from
happening.
Cc: stable@vger.kernel.org # 3.6
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function rb_set_head_page() searches the list of ring buffer
pages for a the page that has the HEAD page flag set. If it does
not find it, it will do a WARN_ON(), disable the ring buffer and
return NULL, as this should never happen.
But if this bug happens to happen, not all callers of this function
can handle a NULL pointer being returned from it. That needs to be
fixed.
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
WARN shouldn't be used as a means of communicating failure to a userspace programmer.
Link: http://lkml.kernel.org/r/20120725153908.GA25203@redhat.com
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It seems that 'ftrace_enabled' flag should not be used inside the tracer
functions. The ftrace core is using this flag for internal purposes, and
the flag wasn't meant to be used in tracers' runtime checks.
stack tracer is the only tracer that abusing the flag. So stop it from
serving as a bad example.
Also, there is a local 'stack_trace_disabled' flag in the stack tracer,
which is never updated; so it can be removed as well.
Link: http://lkml.kernel.org/r/1342637761-9655-1-git-send-email-anton.vorontsov@linaro.org
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Trace buffer size is now per-cpu, so that there are the following two
patterns in resizing of buffers.
(1) resize per-cpu buffers to same given size
(2) resize per-cpu buffers to another trace_array's buffer size
for each CPU (such as preparing the max_tr which is equivalent
to the global_trace's size)
__tracing_resize_ring_buffer() can be used for (1), and had
implemented (2) inside it for resetting the global_trace to the
original size.
(2) was also implemented in another place. So this patch assembles
them in a new function - resize_buffer_duplicate_size().
Link: http://lkml.kernel.org/r/20121017025616.2627.91226.stgit@falsita
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There is a typo here where '&' is used instead of '|' and it turns the
statement into a noop. The original code is equivalent to:
iter->flags &= ~((1 << 2) & (1 << 4));
Link: http://lkml.kernel.org/r/20120609161027.GD6488@elgon.mountain
Cc: stable@vger.kernel.org # all of them
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Show raw time stamp values for stats per cpu if you choose counter or tsc mode
for trace_clock. Although a unit of tracing time stamp is nsec in local or global mode,
the units in counter and TSC mode are tracing counter and cycles respectively.
Link: http://lkml.kernel.org/r/1352837903-32191-3-git-send-email-dhsharp@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In order to promote interoperability between userspace tracers and ftrace,
add a trace_clock that reports raw TSC values which will then be recorded
in the ring buffer. Userspace tracers that also record TSCs are then on
exactly the same time base as the kernel and events can be unambiguously
interlaced.
Tested: Enabled a tracepoint and the "tsc" trace_clock and saw very large
timestamp values.
v2:
Move arch-specific bits out of generic code.
v3:
Rename "x86-tsc", cleanups
v7:
Generic arch bits in Kbuild.
Google-Bug-Id: 6980623
Link: http://lkml.kernel.org/r/1352837903-32191-1-git-send-email-dhsharp@google.com
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add trace_options to the kernel command line parameter to be able to
set options at early boot. For example, to enable stack dumps of
events, add the following:
trace_options=stacktrace
This along with the trace_event option, you can get not only
traces of the events but also the stack dumps with them.
Requested-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Have the ring buffer commit function use the irq_work infrastructure to
wake up any waiters waiting on the ring buffer for new data. The irq_work
was created for such a purpose, where doing the actual wake up at the
time of adding data is too dangerous, as an event or function trace may
be in the midst of the work queue locks and cause deadlocks. The irq_work
will either delay the action to the next timer interrupt, or trigger an IPI
to itself forcing an interrupt to do the work (in a safe location).
With irq_work, all ring buffer commits can safely do wakeups, removing
the need for the ring buffer commit "nowake" variants, which were used
by events and function tracing. All commits can now safely use the
normal commit, and the "nowake" variants can be removed.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing_enabled file was used as a quick way to stop
tracers, and try to bring down overhead for things like
the latency tracers (irqsoff, wakeup, etc). But it didn't
work that well.
The tracing_on file was created as a really fast way to
stop recording into the ftrace ring buffer and can interact
with the kernel. That is a tracing_off() call in the kernel
can disable recording of events, and then from userspace one
could echo 1 into the tracing_on file to continue it. The
tracing_enabled function did too much to allow for this.
The tracing_on has taken over as a way to start and stop tracing
and the tracing_enabled file should not be used. But because of
its existance, it still confuses people. Over a year ago the
following commit was added:
commit 6752ab4a9c
Author: Steven Rostedt <srostedt@redhat.com>
Date: Tue Feb 8 13:54:06 2011 -0500
tracing: Deprecate tracing_enabled for tracing_on
This commit added a WARN_ON() if the tracing_enabled file's variable
was changed. After this was added, only LatencyTop complained, and
they soon fixed their tool as there was no reason that LatencyTop
should touch this file as it was using the perf ring buffers which
this file does not interact with. But since that time no one else
has complained about this WARN_ON(). Thus it is safe to assume that
this file is no longer needed. Time to get rid of it.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing_enabled file has been deprecated as it never was able
to serve its purpose well. The tracing_on file has taken over.
Instead of having code to keep tracing_enabled, have the tracing_enabled
file just set tracing_on, and remove the tracing_enabled variable.
This allows us to remove the tracing_enabled file. The reason that
the remove is in a different change set and not removed here is
in case we find some lonely userspace tool that requires the file
to exist. Then the removal patch will get reverted, but this one
will not.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function register_tracer() is only used by kernel core code,
that never needs to remove the tracer. As trace_events have become
the main way to add new tracing to the kernel, the need to
unregister a tracer has diminished. Remove the unused function
unregister_tracer(). If a need arises where we need it, then we
can always add it back.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The open function used by available_events is the same as set_event even
though it uses different seq functions. This causes a side effect of
writing into available_events clearing all events, even though
available_events is suppose to be read only.
There's no reason to keep a single function for just the open and have
both use different functions for everything else. It is a little
confusing and causes strange behavior. Just have each have their own
function.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ring_buffer_oldest_event_ts() should return a value of u64 type, because
ring_buffer_per_cpu->buffer_page->buffer_data_page->time_stamp is u64 type.
Link: http://lkml.kernel.org/r/1349998076-15495-5-git-send-email-dhsharp@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Because the "tsc" clock isn't in nanoseconds, the ring buffer must be
reset when changing clocks so that incomparable timestamps don't end up
in the same trace.
Tested: Confirmed switching clocks resets the trace buffer.
Google-Bug-Id: 6980623
Link: http://lkml.kernel.org/r/1349998076-15495-3-git-send-email-dhsharp@google.com
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The functions defined in include/trace/syscalls.h are not used directly
since struct ftrace_event_class was introduced. Remove them from the
header file and rearrange the ftrace_event_class declarations in
trace_syscalls.c.
Link: http://lkml.kernel.org/r/1339112785-21806-2-git-send-email-vnagarnaik@google.com
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove ftrace_format_syscall() declaration; it is neither defined nor
used. Also update a comment and formatting.
Link: http://lkml.kernel.org/r/1339112785-21806-1-git-send-email-vnagarnaik@google.com
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Whenever an event is registered, the comm of tasks are saved at
every task switch instead of saving them at every event. But if
an event isn't executed much, the comm cache will be filled up
by tasks that did not record the event and you lose out on the comms
that did.
Here's an example, if you enable the following events:
echo 1 > /debug/tracing/events/kvm/kvm_cr/enable
echo 1 > /debug/tracing/events/net/net_dev_xmit/enable
Note, there's no kvm running on this machine so the first event will
never be triggered, but because it is enabled, the storing of comms
will continue. If we now disable the network event:
echo 0 > /debug/tracing/events/net/net_dev_xmit/enable
and look at the trace:
cat /debug/tracing/trace
sshd-2672 [001] ..s2 375.731616: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 375.731617: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 375.859356: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 375.859357: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 375.947351: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 375.947352: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 376.035383: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 376.035383: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 377.563806: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=226 rc=0
sshd-2672 [001] ..s1 377.563807: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=226 rc=0
sshd-2672 [001] ..s2 377.563834: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6be0 len=114 rc=0
sshd-2672 [001] ..s1 377.563842: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6be0 len=114 rc=0
We see that process 2672 which triggered the events has the comm "sshd".
But if we run hackbench for a bit and look again:
cat /debug/tracing/trace
<...>-2672 [001] ..s2 375.731616: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 375.731617: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 375.859356: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 375.859357: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 375.947351: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 375.947352: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 376.035383: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 376.035383: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 377.563806: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=226 rc=0
<...>-2672 [001] ..s1 377.563807: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=226 rc=0
<...>-2672 [001] ..s2 377.563834: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6be0 len=114 rc=0
<...>-2672 [001] ..s1 377.563842: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6be0 len=114 rc=0
The stored "sshd" comm has been flushed out and we get a useless "<...>".
But by only storing comms after a trace event occurred, we can run
hackbench all day and still get the same output.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The functon tracing_sched_wakeup_trace() does an open coded unlock
commit and save stack. This is what the trace_nowake_buffer_unlock_commit()
is for.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If comm recording is not enabled when trace_printk() is used then
you just get this type of output:
[ adding trace_printk("hello! %d", irq); in do_IRQ ]
<...>-2843 [001] d.h. 80.812300: do_IRQ: hello! 14
<...>-2734 [002] d.h2 80.824664: do_IRQ: hello! 14
<...>-2713 [003] d.h. 80.829971: do_IRQ: hello! 14
<...>-2814 [000] d.h. 80.833026: do_IRQ: hello! 14
By enabling the comm recorder when trace_printk is enabled:
hackbench-6715 [001] d.h. 193.233776: do_IRQ: hello! 21
sshd-2659 [001] d.h. 193.665862: do_IRQ: hello! 21
<idle>-0 [001] d.h1 193.665996: do_IRQ: hello! 21
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since tracing is not used by 99% of Linux users, even though tracing
may be configured in, it does not make sense to allocate 1.4 Megs
per CPU for the ring buffers if they are not used. Thus, on boot up
the ring buffers are set to a minimal size until something needs the
and they are expanded.
This works well for events and tracers (function, etc), but for the
asynchronous use of trace_printk() which can write to the ring buffer
at any time, does not expand the buffers.
On boot up a check is made to see if any trace_printk() is used to
see if the trace_printk() temp buffer pages should be allocated. This
same code can be used to expand the buffers as well.
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The existing 'overrun' counter is incremented when the ring
buffer wraps around, with overflow on (the default). We wanted
a way to count requests lost from the buffer filling up with
overflow off, too. I decided to add a new counter instead
of retro-fitting the existing one because it seems like a
different statistic to count conceptually, and also because
of how the code was structured.
Link: http://lkml.kernel.org/r/1310765038-26399-1-git-send-email-slavapestov@google.com
Signed-off-by: Slava Pestov <slavapestov@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
print_max and use_max_tr in struct tracer are "int" variables and
used like flags. This is wasteful, so change the type to "bool".
Link: http://lkml.kernel.org/r/20121002082710.9807.86393.stgit@falsita
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's times during debugging that it is helpful to see traces of early
boot functions. But the tracers are initialized at device_initcall()
which is quite late during the boot process. Setting the kernel command
line parameter ftrace=function will not show anything until the function
tracer is initialized. This prevents being able to trace functions before
device_initcall().
There's no reason that the tracers need to be initialized so late in the
boot process. Move them up to core_initcall() as they still need to come
after early_initcall() which initializes the tracing buffers.
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There don't have any 'r' prefix in uprobe event naming, remove it.
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
With a system where, num_present_cpus < num_possible_cpus, even if all
CPUs are online, non-present CPUs don't have per_cpu buffers allocated.
If per_cpu/<cpu>/buffer_size_kb is modified for such a CPU, it can cause
a panic due to NULL dereference in ring_buffer_resize().
To fix this, resize operation is allowed only if the per-cpu buffer has
been initialized.
Link: http://lkml.kernel.org/r/1349912427-6486-1-git-send-email-vnagarnaik@google.com
Cc: stable@vger.kernel.org # 3.5+
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull virtio changes from Rusty Russell:
"New workflow: same git trees pulled by linux-next get sent straight to
Linus. Git is awkward at shuffling patches compared with quilt or mq,
but that doesn't happen often once things get into my -next branch."
* 'virtio-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (24 commits)
lguest: fix occasional crash in example launcher.
virtio-blk: Disable callback in virtblk_done()
virtio_mmio: Don't attempt to create empty virtqueues
virtio_mmio: fix off by one error allocating queue
drivers/virtio/virtio_pci.c: fix error return code
virtio: don't crash when device is buggy
virtio: remove CONFIG_VIRTIO_RING
virtio: add help to CONFIG_VIRTIO option.
virtio: support reserved vqs
virtio: introduce an API to set affinity for a virtqueue
virtio-ring: move queue_index to vring_virtqueue
virtio_balloon: not EXPERIMENTAL any more.
virtio-balloon: dependency fix
virtio-blk: fix NULL checking in virtblk_alloc_req()
virtio-blk: Add REQ_FLUSH and REQ_FUA support to bio path
virtio-blk: Add bio-based IO path for virtio-blk
virtio: console: fix error handling in init() function
tools: Fix pthread flag for Makefile of trace-agent used by virtio-trace
tools: Add guest trace agent as a user tool
virtio/console: Allocate scatterlist according to the current pipe size
...
and no longer use its debugfs knobs. The change slightly touches
kernel/trace directory, but it got the needed ack from Steven Rostedt:
http://lkml.org/lkml/2012/8/21/688
2. Added maintainers entry;
3. A bunch of fixes, nothing special.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=1HAE
-----END PGP SIGNATURE-----
Merge tag 'for-v3.7' of git://git.infradead.org/users/cbou/linux-pstore
Pull pstore changes from Anton Vorontsov:
1) We no longer ad-hoc to the function tracer "high level"
infrastructure and no longer use its debugfs knobs. The change
slightly touches kernel/trace directory, but it got the needed ack
from Steven Rostedt:
http://lkml.org/lkml/2012/8/21/688
2) Added maintainers entry;
3) A bunch of fixes, nothing special.
* tag 'for-v3.7' of git://git.infradead.org/users/cbou/linux-pstore:
pstore: Avoid recursive spinlocks in the oops_in_progress case
pstore/ftrace: Convert to its own enable/disable debugfs knob
pstore/ram: Add missing platform_device_unregister
MAINTAINERS: Add pstore maintainers
pstore/ram: Mark ramoops_pstore_write_buf() as notrace
pstore/ram: Fix printk format warning
pstore/ram: Fix possible NULL dereference
Pull user namespace changes from Eric Biederman:
"This is a mostly modest set of changes to enable basic user namespace
support. This allows the code to code to compile with user namespaces
enabled and removes the assumption there is only the initial user
namespace. Everything is converted except for the most complex of the
filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs,
nfs, ocfs2 and xfs as those patches need a bit more review.
The strategy is to push kuid_t and kgid_t values are far down into
subsystems and filesystems as reasonable. Leaving the make_kuid and
from_kuid operations to happen at the edge of userspace, as the values
come off the disk, and as the values come in from the network.
Letting compile type incompatible compile errors (present when user
namespaces are enabled) guide me to find the issues.
The most tricky areas have been the places where we had an implicit
union of uid and gid values and were storing them in an unsigned int.
Those places were converted into explicit unions. I made certain to
handle those places with simple trivial patches.
Out of that work I discovered we have generic interfaces for storing
quota by projid. I had never heard of the project identifiers before.
Adding full user namespace support for project identifiers accounts
for most of the code size growth in my git tree.
Ultimately there will be work to relax privlige checks from
"capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing
root in a user names to do those things that today we only forbid to
non-root users because it will confuse suid root applications.
While I was pushing kuid_t and kgid_t changes deep into the audit code
I made a few other cleanups. I capitalized on the fact we process
netlink messages in the context of the message sender. I removed
usage of NETLINK_CRED, and started directly using current->tty.
Some of these patches have also made it into maintainer trees, with no
problems from identical code from different trees showing up in
linux-next.
After reading through all of this code I feel like I might be able to
win a game of kernel trivial pursuit."
Fix up some fairly trivial conflicts in netfilter uid/git logging code.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits)
userns: Convert the ufs filesystem to use kuid/kgid where appropriate
userns: Convert the udf filesystem to use kuid/kgid where appropriate
userns: Convert ubifs to use kuid/kgid
userns: Convert squashfs to use kuid/kgid where appropriate
userns: Convert reiserfs to use kuid and kgid where appropriate
userns: Convert jfs to use kuid/kgid where appropriate
userns: Convert jffs2 to use kuid and kgid where appropriate
userns: Convert hpfs to use kuid and kgid where appropriate
userns: Convert btrfs to use kuid/kgid where appropriate
userns: Convert bfs to use kuid/kgid where appropriate
userns: Convert affs to use kuid/kgid wherwe appropriate
userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids
userns: On ia64 deal with current_uid and current_gid being kuid and kgid
userns: On ppc convert current_uid from a kuid before printing.
userns: Convert s390 getting uid and gid system calls to use kuid and kgid
userns: Convert s390 hypfs to use kuid and kgid where appropriate
userns: Convert binder ipc to use kuids
userns: Teach security_path_chown to take kuids and kgids
userns: Add user namespace support to IMA
userns: Convert EVM to deal with kuids and kgids in it's hmac computation
...
Use generic steal operation on pipe buffer to allow stealing
ring buffer's read page from pipe buffer.
Note that this could reduce the performance of splice on the
splice_write side operation without affinity setting.
Since the ring buffer's read pages are allocated on the
tracing-node, but the splice user does not always execute
splice write side operation on the same node. In this case,
the page will be accessed from the another node.
Thus, it is strongly recommended to assign the splicing
thread to corresponding node.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This patch splits trace event initialization in two stages:
* ftrace enable
* sysfs event entry creation
This allows to capture trace events from an earlier point
by using 'trace_event' kernel parameter and is important
to trace boot-up allocations.
Note that, in order to enable events at core_initcall,
it's necessary to move init_ftrace_syscalls() from
core_initcall to early_initcall.
Link: http://lkml.kernel.org/r/1347461277-25302-1-git-send-email-elezegarcia@gmail.com
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In our application, we have trace markers spread through user-space.
We have markers in GL, X, etc. These are super handy for Chrome's
about:tracing feature (Chrome + system + kernel trace view), but
can be very distracting when you're trying to debug a kernel issue.
I normally, use "grep -v tracing_mark_write" but it would be nice
if I could just temporarily disable markers all together.
Link: http://lkml.kernel.org/r/1347066739-26285-1-git-send-email-msb@chromium.org
CC: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
- When tracing capture the kuid.
- When displaying the data to user space convert the kuid into the
user namespace of the process that opened the report file.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Commit 56449f437 "tracing: make the trace clocks available generally",
in April 2009, made trace_clock available unconditionally, since
CONFIG_X86_DS used it too.
Commit faa4602e47 "x86, perf, bts, mm: Delete the never used BTS-ptrace code",
in March 2010, removed CONFIG_X86_DS, and now only CONFIG_RING_BUFFER (split
out from CONFIG_TRACING for general use) has a dependency on trace_clock. So,
only compile in trace_clock with CONFIG_RING_BUFFER or CONFIG_TRACING
enabled.
Link: http://lkml.kernel.org/r/20120903024513.GA19583@leaf
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With this patch we no longer reuse function tracer infrastructure, now
we register our own tracer back-end via a debugfs knob.
It's a bit more code, but that is the only downside. On the bright side we
have:
- Ability to make persistent_ram module removable (when needed, we can
move ftrace_ops struct into a module). Note that persistent_ram is still
not removable for other reasons, but with this patch it's just one
thing less to worry about;
- Pstore part is more isolated from the generic function tracer. We tried
it already by registering our own tracer in available_tracers, but that
way we're loosing ability to see the traces while we record them to
pstore. This solution is somewhere in the middle: we only register
"internal ftracer" back-end, but not the "front-end";
- When there is only pstore tracing enabled, the kernel will only write
to the pstore buffer, omitting function tracer buffer (which, of course,
still can be enabled via 'echo function > current_tracer').
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
The function graph has a test to check if the frame pointer is
corrupted, which can happen with various options of gcc with mcount.
But this is not an issue with -mfentry as -mfentry does not need nor use
frame pointers for function graph tracing.
Link: http://lkml.kernel.org/r/20120807194059.773895870@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Thanks to Andi Kleen, gcc 4.6.0 now supports -mfentry for x86
(and hopefully soon for other archs). What this does is to have
the function profiler start at the beginning of the function
instead of after the stack is set up. As plain -pg (mcount) is
called after the stack is set up, and in some cases can have issues
with the function graph tracer. It also requires frame pointers to
be enabled.
The -mfentry now calls __fentry__ at the beginning of the function.
This allows for compiling without frame pointers and even has the
ability to access parameters if needed.
If the architecture and the compiler both support -mfentry then
use that instead.
Link: http://lkml.kernel.org/r/20120807194059.392617243@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
. Fix include order for bison/flex-generated C files, from Ben Hutchings
. Build fixes and documentation corrections from David Ahern
. Group parsing support, from Jiri Olsa
. UI/gtk refactorings and improvements from Namhyung Kim
. NULL deref fix for perf script, from Namhyung Kim
. Assorted cleanups from Robert Richter
. Let O= makes handle relative paths, from Steven Rostedt
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iQIcBAABAgAGBQJQMkGhAAoJENZQFvNTUqpAqjsQAJE5iD1LFogC8o/WjvRHz0TY
Y0x+sR/XfW61KYpeq5g+UaKuFU3P44ijCoyks3y5sza97DkYgUwMpEHlLXFSM8Pp
sNOapqY57s24nq3MLrhH1V9w+cSE+m2u/Gi5fGLCQekio9gkOBwYxNGk7vpKri/n
LBRsMozBu/mZjMy20uWOb7Uk8xsAToh+TFaAtjyQ9Snn9nNJj49NUAp37uN888H/
ducMLq32HN5v/6Zd3q6IWdDWgZsHLkIa3R5FIs/GNe3Dih07gtYLmDol4ktPbTFm
yoaWpP5wbtu/62EZlJwE393vMuoeqN/96394ZZQGFafhHVxN4+rcBhXbejBs0T2b
wk/0CzntW8bbUAI/cl3SB9aui//FWOxcjG9aDQ7PsmHzPw1Q4VD0F9Mcod4p+dRX
PsA9q/tST1eAiwzWYthDtj81U7iChINcXKhoZn2xn6+0+aMH+6FFNBmCH8MR5aCU
BvrXhTJjvau/Ym/sILl4Tf4wfssTq49yMsn/YKCwLJ0hg0XlTObWfQRy2MOayXH9
NJvUE+9GSXoTEKhmr1AfTYEG9vObaXZyFwAI74xvPPwUYojCb4ZjEKmG0egW+VGk
IJKFCaJZwwVsGau4aIbFAMP12/L8Qs/Ox91ddCJ0j5TIlSGMaqW5lbV1N1crzlTT
a0GsN49NvhbFttBXrcNX
=0a2X
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
* Fix include order for bison/flex-generated C files, from Ben Hutchings
* Build fixes and documentation corrections from David Ahern
* Group parsing support, from Jiri Olsa
* UI/gtk refactorings and improvements from Namhyung Kim
* NULL deref fix for perf script, from Namhyung Kim
* Assorted cleanups from Robert Richter
* Let O= makes handle relative paths, from Steven Rostedt
* perf script python fixes, from Feng Tang.
* Improve 'perf lock' error message when the needed tracepoints
are not present, from David Ahern.
* Initial bash completion support, from Frederic Weisbecker
* Allow building without libelf, from Namhyung Kim.
* Support DWARF CFI based unwind to have callchains when %bp
based unwinding is not possible, from Jiri Olsa.
* Symbol resolution fixes, while fixing support PPC64 files with an .opt ELF
section was the end goal, several fixes for code that handles all
architectures and cleanups are included, from Cody Schafer.
* Add a description for the JIT interface, from Andi Kleen.
* Assorted fixes for Documentation and build in 32 bit, from Robert Richter
* Add support for non-tracepoint events in perf script python, from Feng Tang
* Cache the libtraceevent event_format associated to each evsel early, so that we
avoid relookups, i.e. calling pevent_find_event repeatedly when processing
tracepoint events.
[ This is to reduce the surface contact with libtraceevents and make clear what
is that the perf tools needs from that lib: so far parsing the common and per
event fields. ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
syscall_get_nr can return -1 in the case that the task is not executing
a system call.
This patch fixes perf_syscall_{enter,exit} to check that the syscall
number is valid before using it as an index into a bitmap.
Link: http://lkml.kernel.org/r/1345137254-7377-1-git-send-email-will.deacon@arm.com
Cc: Jason Baron <jbaron@redhat.com>
Cc: Wade Farnsworth <wade_farnsworth@mentor.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add missing initialization for ret variable. Its initialization
is based on the re_cnt variable, which is being set deep down
in the ftrace_function_filter_re function.
I'm not sure compilers would be smart enough to see this in near
future, so killing the warning this way.
Link: http://lkml.kernel.org/r/1340120894-9465-2-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The warkeup_rt self test used msleep() calls to wait for real time
tasks to wake up and run. On bare-metal hardware, this was enough as
the scheduler should let the RT task run way before the non-RT task
wakes up from the msleep(). If it did not, then that would mean the
scheduler was broken.
But when dealing with virtual machines, this is a different story.
If the RT task wakes up on a VCPU, it's up to the host to decide when
that task gets to schedule, which can be far behind the time that the
non-RT task wakes up. In this case, the test would fail incorrectly.
As we are not testing the scheduler, but instead the wake up tracing,
we can use completions to wait and not depend on scheduler timings
to see if events happen on time.
Link: http://lkml.kernel.org/r/1343663105.3847.7.camel@fedora
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull perf fixes from Ingo Molnar:
"Fix merge window fallout and fix sleep profiling (this was always
broken, so it's not a fix for the merge window - we can skip this one
from the head of the tree)."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/trace: Add ability to set a target task for events
perf/x86: Fix USER/KERNEL tagging of samples properly
perf/x86/intel/uncore: Make UNCORE_PMU_HRTIMER_INTERVAL 64-bit
A few events are interesting not only for a current task.
For example, sched_stat_* events are interesting for a task
which wakes up. For this reason, it will be good if such
events will be delivered to a target task too.
Now a target task can be set by using __perf_task().
The original idea and a draft patch belongs to Peter Zijlstra.
I need these events for profiling sleep times. sched_switch is used for
getting callchains and sched_stat_* is used for getting time periods.
These events are combined in user space, then it can be analyzed by
perf tools.
Inspired-by: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arun Sharma <asharma@fb.com>
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1342016098-213063-1-git-send-email-avagin@openvz.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a new filter update interface ftrace_set_filter_ip()
to set ftrace filter by ip address, not only glob pattern.
Link: http://lkml.kernel.org/r/20120605102808.27845.67952.stgit@localhost.localdomain
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add selftests to test the save-regs functionality of ftrace.
If the arch supports saving regs, then it will make sure that regs is
at least not NULL in the callback.
If the arch does not support saving regs, it makes sure that the
registering of the ftrace_ops that requests saving regs fails.
It then tests the registering of the ftrace_ops succeeds if the
'IF_SUPPORTED' flag is set. Then it makes sure that the regs passed to
the function is NULL.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add selftests to test the function tracing recursion protection actually
does work. It also tests if a ftrace_ops states it will perform its own
protection. Although, even if the ftrace_ops states it will protect itself,
the ftrace infrastructure may still provide protection if the arch does
not support all features or another ftrace_ops is registered.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As more users of the function tracer utility are being added, they do
not always add the necessary recursion protection. To protect from
function recursion due to tracing, if the callback ftrace_ops does not
specifically specify that it protects against recursion (by setting
the FTRACE_OPS_FL_RECURSION_SAFE flag), the list operation will be
called by the mcount trampoline which adds recursion protection.
If the flag is set, then the function will be called directly with no
extra protection.
Note, the list operation is called if more than one function callback
is registered, or if the arch does not support all of the function
tracer features.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Here's the big staging tree merge for the 3.6-rc1 merge window.
There are some patches in here outside of drivers/staging/, notibly the iio
code (which is still stradeling the staging / not staging boundry), the pstore
code, and the tracing code. All of these have gotten ackes from the various
subsystem maintainers to be included in this tree. The pstore and tracing
patches are related, and are coming here as they replace one of the android
staging drivers.
Otherwise, the normal staging mess. Lots of cleanups and a few new drivers
(some iio drivers, and the large csr wireless driver abomination.)
Note, you will get a merge issue with the following files:
drivers/staging/comedi/drivers/s626.h
drivers/staging/gdm72xx/netlink_k.c
both of which should be trivial for you to handle.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iEYEABECAAYFAlAQiD8ACgkQMUfUDdst+ykxhgCeMUjvc+1RTtSprzvkzpejgoUU
6A4AnAleWMnkaCD8vruGnRdGl/Qtz51+
=mN6M
-----END PGP SIGNATURE-----
Merge tag 'staging-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree patches from Greg Kroah-Hartman:
"Here's the big staging tree merge for the 3.6-rc1 merge window.
There are some patches in here outside of drivers/staging/, notibly
the iio code (which is still stradeling the staging / not staging
boundry), the pstore code, and the tracing code. All of these have
gotten acks from the various subsystem maintainers to be included in
this tree. The pstore and tracing patches are related, and are coming
here as they replace one of the android staging drivers.
Otherwise, the normal staging mess. Lots of cleanups and a few new
drivers (some iio drivers, and the large csr wireless driver
abomination.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fixed up trivial conflicts in drivers/staging/comedi/drivers/s626.h and
drivers/staging/gdm72xx/netlink_k.c
* tag 'staging-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1108 commits)
staging: csr: delete a bunch of unused library functions
staging: csr: remove csr_utf16.c
staging: csr: remove csr_pmem.h
staging: csr: remove CsrPmemAlloc
staging: csr: remove CsrPmemFree()
staging: csr: remove CsrMemAllocDma()
staging: csr: remove CsrMemCalloc()
staging: csr: remove CsrMemAlloc()
staging: csr: remove CsrMemFree() and CsrMemFreeDma()
staging: csr: remove csr_util.h
staging: csr: remove CsrOffSetOf()
stating: csr: remove unneeded #includes in csr_util.c
staging: csr: make CsrUInt16ToHex static
staging: csr: remove CsrMemCpy()
staging: csr: remove CsrStrLen()
staging: csr: remove CsrVsnprintf()
staging: csr: remove CsrStrDup
staging: csr: remove CsrStrChr()
staging: csr: remove CsrStrNCmp
staging: csr: remove CsrStrCmp
...
Add a way to have different functions calling different trampolines.
If a ftrace_ops wants regs saved on the return, then have only the
functions with ops registered to save regs. Functions registered by
other ops would not be affected, unless the functions overlap.
If one ftrace_ops registered functions A, B and C and another ops
registered fucntions to save regs on A, and D, then only functions
A and D would be saving regs. Function B and C would work as normal.
Although A is registered by both ops: normal and saves regs; this is fine
as saving the regs is needed to satisfy one of the ops that calls it
but the regs are ignored by the other ops function.
x86_64 implements the full regs saving, and i386 just passes a NULL
for regs to satisfy the ftrace_ops passing. Where an arch must supply
both regs and ftrace_ops parameters, even if regs is just NULL.
It is OK for an arch to pass NULL regs. All function trace users that
require regs passing must add the flag FTRACE_OPS_FL_SAVE_REGS when
registering the ftrace_ops. If the arch does not support saving regs
then the ftrace_ops will fail to register. The flag
FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED may be set that will prevent the
ftrace_ops from failing to register. In this case, the handler may
either check if regs is not NULL or check if ARCH_SUPPORTS_FTRACE_SAVE_REGS.
If the arch supports passing regs it will set this macro and pass regs
for ops that request them. All other archs will just pass NULL.
Link: Link: http://lkml.kernel.org/r/20120711195745.107705970@goodmis.org
Cc: Alexander van Heukelum <heukelum@fastmail.fm>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Return as the 4th paramater to the function tracer callback the pt_regs.
Later patches that implement regs passing for the architectures will require
having the ftrace_ops set the SAVE_REGS flag, which will tell the arch
to take the time to pass a full set of pt_regs to the ftrace_ops callback
function. If the arch does not support it then it should pass NULL.
If an arch can pass full regs, then it should define:
ARCH_SUPPORTS_FTRACE_SAVE_REGS to 1
Link: http://lkml.kernel.org/r/20120702201821.019966811@goodmis.org
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As the function tracer starts to get more features, the support for
theses features will spread out throughout the different architectures
over time. These features boil down to what each arch does in the
mcount trampoline (the ftrace_caller).
Currently there's two features that are not the same throughout the
archs.
1) Support to stop function tracing before the callback
2) passing of the ftrace ops
Both of these require placing an indirect function to support the
features if the mcount trampoline does not.
On a side note, for all architectures, when more than one callback
is registered to the function tracer, an intermediate 'list' function
is called by the mcount trampoline to iterate through the callbacks
that are registered.
Instead of making a separate function for each of these features,
and requiring several indirect calls, just use the single 'list' function
as the intermediate, to handle all cases. If an arch does not support
the 'stop function tracing' or the passing of ftrace ops, just force
it to use the list function that will handle the features required.
This makes the code cleaner and simpler and removes a lot of
#ifdefs in the code.
Link: http://lkml.kernel.org/r/20120612225424.495625483@goodmis.org
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the function trace callback receives only the ip and parent_ip
of the function that it traced. It would be more powerful to also return
the ops that registered the function as well. This allows the same function
to act differently depending on what ftrace_ops registered it.
Link: http://lkml.kernel.org/r/20120612225424.267254552@goodmis.org
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since the function accepts just one bit, we can use the switch
construction instead of if/else if/...
Just a cosmetic change, there should be no functional changes.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces 'func_ptrace' option, now available in
/sys/kernel/debug/tracing/options when function tracer
is selected.
The patch also adds some tiny code that calls back to pstore
to record the trace. The callback is no-op when PSTORE=n.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If tracer->init() fails, current code will leave current_tracer pointing
to an unusable tracer, which at best makes 'current_tracer' report
inaccurate value.
Fix the issue by pointing current_tracer to nop tracer, and only update
current_tracer with the new one after all the initialization succeeds.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull RCU, perf, and scheduler fixes from Ingo Molnar.
The RCU fix is a revert for an optimization that could cause deadlocks.
One of the scheduler commits (164c33c6ad "sched: Fix fork() error path
to not crash") is correct but not complete (some architectures like Tile
are not covered yet) - the resulting additional fixes are still WIP and
Ingo did not want to delay these pending fixes. See this thread on
lkml:
[PATCH] fork: fix error handling in dup_task()
The perf fixes are just trivial oneliners.
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "rcu: Move PREEMPT_RCU preemption to switch_to() invocation"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf kvm: Fix segfault with report and mixed guestmount use
perf kvm: Fix regression with guest machine creation
perf script: Fix format regression due to libtraceevent merge
ring-buffer: Fix accounting of entries when removing pages
ring-buffer: Fix crash due to uninitialized new_pages list head
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS/sched: Update scheduler file pattern
sched/nohz: Rewrite and fix load-avg computation -- again
sched: Fix fork() error path to not crash
Clean up and return -ENOMEM on if the kzalloc() fails.
This also prevents a potential crash, as the pointer that failed to
allocate would be later used.
Link: http://lkml.kernel.org/r/20120711063507.GF11812@elgon.mountain
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull block bits from Jens Axboe:
"As vacation is coming up, thought I'd better get rid of my pending
changes in my for-linus branch for this iteration. It contains:
- Two patches for mtip32xx. Killing a non-compliant sysfs interface
and moving it to debugfs, where it belongs.
- A few patches from Asias. Two legit bug fixes, and one killing an
interface that is no longer in use.
- A patch from Jan, making the annoying partition ioctl warning a bit
less annoying, by restricting it to !CAP_SYS_RAWIO only.
- Three bug fixes for drbd from Lars Ellenberg.
- A fix for an old regression for umem, it hasn't really worked since
the plugging scheme was changed in 3.0.
- A few fixes from Tejun.
- A splice fix from Eric Dumazet, fixing an issue with pipe
resizing."
* 'for-linus' of git://git.kernel.dk/linux-block:
scsi: Silence unnecessary warnings about ioctl to partition
block: Drop dead function blk_abort_queue()
block: Mitigate lock unbalance caused by lock switching
block: Avoid missed wakeup in request waitqueue
umem: fix up unplugging
splice: fix racy pipe->buffers uses
drbd: fix null pointer dereference with on-congestion policy when diskless
drbd: fix list corruption by failing but already aborted reads
drbd: fix access of unallocated pages and kernel panic
xen/blkfront: Add WARN to deal with misbehaving backends.
blkcg: drop local variable @q from blkg_destroy()
mtip32xx: Create debugfs entries for troubleshooting
mtip32xx: Remove 'registers' and 'flags' from sysfs
blkcg: fix blkg_alloc() failure path
block: blkcg_policy_cfq shouldn't be used if !CONFIG_CFQ_GROUP_IOSCHED
block: fix return value on cfq_init() failure
mtip32xx: Remove version.h header file inclusion
xen/blkback: Copy id field when doing BLKIF_DISCARD.
When removing pages from the ring buffer, its state is not reset. This
means that the counters need to be correctly updated to account for the
pages removed.
Update the overrun counter to reflect the removed events from the pages.
Link: http://lkml.kernel.org/r/1340998301-1715-1-git-send-email-vnagarnaik@google.com
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The new_pages list head in the cpu_buffer is not initialized. When
adding pages to the ring buffer, if the memory allocation fails in
ring_buffer_resize, the clean up handler tries to free up the allocated
pages from all the cpu buffers. The panic is caused by referencing the
uninitialized new_pages list head.
Initializing the new_pages list head in rb_allocate_cpu_buffer fixes
this.
Link: http://lkml.kernel.org/r/1340391005-10880-1-git-send-email-vnagarnaik@google.com
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring buffer reader page is used to swap a page from the writable
ring buffer. If the writer happens to be on that page, it ends up on the
reader page, but will simply move off of it, back into the writable ring
buffer as writes are added.
The time stamp passed back to the readers is stored in the cpu_buffer per
CPU descriptor. This stamp is updated when a swap of the reader page takes
place, and it reads the current stamp from the page taken from the writable
ring buffer. Everytime a writer goes to a new page, it updates the time stamp
of that page.
The problem happens if a reader reads a page from an empty per CPU ring buffer.
If the buffer is empty, the swap still takes place, placing the writer at the
start of the reader page. If at a later time, a write happens, it updates the
page's time stamp and continues. But the problem is that the read_stamp does
not get updated, because the page was already swapped.
The solution to this was to not swap the page if the ring buffer happens to
be empty. This also removes the side effect that the writes on the reader
page will not get updated because the writer never gets back on the reader
page without a swap. That is, if a read happens on an empty buffer, but then
no reads happen for a while. If a swap took place, and the writer were to start
writing a lot of data (function tracer), it will start overflowing the ring buffer
and overwrite the older data. But because the writer never goes back onto the
reader page, the data left on the reader page never gets overwritten. This
causes the reader to see really old data, followed by a jump to newer data.
Link: http://lkml.kernel.org/r/1340060577-9112-1-git-send-email-dhsharp@google.com
Google-Bug-Id: 6410455
Reported-by: David Sharp <dhsharp@google.com>
tested-by: David Sharp <dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Replace the NR_CPUS array of buffer_iter from the trace_iterator
with an allocated array. This will just create an array of
possible CPUS instead of the max number specified.
The use of NR_CPUS in that array caused allocation failures for
machines that were tight on memory. This did not cause any failures
to the system itself (no crashes), but caused unnecessary failures
for reading the trace files.
Added a helper function called 'trace_buffer_iter()' that returns
the buffer_iter item or NULL if it is not defined or the array was
not allocated. Some routines do not require the array
(tracing_open_pipe() for one).
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a WARN_ON() output on test failures so that they are easier to detect
in automated tests. Although, the WARN_ON() will not print if the test
causes the system to crash, obviously.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
All trace events including ftrace internel events (like trace_printk
and function tracing), register functions that describe how to print
their output. The events may be recorded as soon as the ring buffer
is allocated, but they are just raw binary in the buffer. The mapping
of event ids to how to print them are held within a structure that
is registered on system boot.
If a crash happens in boot up before these functions are registered
then their output (via ftrace_dump_on_oops) will be useless:
Dumping ftrace buffer:
---------------------------------
<...>-1 0.... 319705us : Unknown type 6
---------------------------------
This can be quite frustrating for a kernel developer trying to see
what is going wrong.
There's no reason to register them so late in the boot up process.
They can be registered by early_initcall().
Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
register_ftrace_function() checks ftrace_disabled and calls
__register_ftrace_function which does it again.
Drop the first check and add the unlikely hint to the second one. Also,
drop the label as John correctly notices.
No functional change.
Link: http://lkml.kernel.org/r/20120329171140.GE6409@aftab
Cc: Borislav Petkov <bp@amd64.org>
Cc: John Kacur <jkacur@redhat.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Dave Jones reported a kernel BUG at mm/slub.c:3474! triggered
by splice_shrink_spd() called from vmsplice_to_pipe()
commit 35f3d14dbb (pipe: add support for shrinking and growing pipes)
added capability to adjust pipe->buffers.
Problem is some paths don't hold pipe mutex and assume pipe->buffers
doesn't change for their duration.
Fix this by adding nr_pages_max field in struct splice_pipe_desc, and
use it in place of pipe->buffers where appropriate.
splice_shrink_spd() loses its struct pipe_inode_info argument.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Tom Herbert <therbert@google.com>
Cc: stable <stable@vger.kernel.org> # 2.6.35
Tested-by: Dave Jones <davej@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A recent update to have tracing_on/off() only affect the ftrace ring
buffers instead of all ring buffers had a cut and paste error.
The tracing_off() did the exact same thing as tracing_on() and
would not actually turn off tracing. Unfortunately, tracing_off()
is more important to be working than tracing_on() as this is a key
development tool, as it lets the developer turn off tracing as soon
as a problem is discovered. It is also used by panic and oops code.
This bug also breaks the 'echo func:traceoff > set_ftrace_filter'
Cc: <stable@vger.kernel.org> # 3.4
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull perf updates from Ingo Molnar.
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf ui browser: Stop using 'self'
perf annotate browser: Read perf config file for settings
perf config: Allow '_' in config file variable names
perf annotate browser: Make feature toggles global
perf annotate browser: The idx_asm field should be used in asm only view
perf tools: Convert critical messages to ui__error()
perf ui: Make --stdio default when TUI is not supported
tools lib traceevent: Silence compiler warning on 32bit build
perf record: Fix branch_stack type in perf_record_opts
perf tools: Reconstruct event with modifiers from perf_event_attr
perf top: Fix counter name fixup when fallbacking to cpu-clock
perf tools: fix thread_map__new_by_pid_str() memory leak in error path
perf tools: Do not use _FORTIFY_SOURCE when DEBUG=1 is specified
tools lib traceevent: Fix signature of create_arg_item()
tools lib traceevent: Use proper function parameter type
tools lib traceevent: Fix freeing arg on process_dynamic_array()
tools lib traceevent: Fix a possibly wrong memory dereference
tools lib traceevent: Fix a possible memory leak
tools lib traceevent: Allow expressions in __print_symbolic() fields
perf evlist: Explicititely initialize input_name
...
Pull user-space probe instrumentation from Ingo Molnar:
"The uprobes code originates from SystemTap and has been used for years
in Fedora and RHEL kernels. This version is much rewritten, reviews
from PeterZ, Oleg and myself shaped the end result.
This tree includes uprobes support in 'perf probe' - but SystemTap
(and other tools) can take advantage of user probe points as well.
Sample usage of uprobes via perf, for example to profile malloc()
calls without modifying user-space binaries.
First boot a new kernel with CONFIG_UPROBE_EVENT=y enabled.
If you don't know which function you want to probe you can pick one
from 'perf top' or can get a list all functions that can be probed
within libc (binaries can be specified as well):
$ perf probe -F -x /lib/libc.so.6
To probe libc's malloc():
$ perf probe -x /lib64/libc.so.6 malloc
Added new event:
probe_libc:malloc (on 0x7eac0)
You can now use it in all perf tools, such as:
perf record -e probe_libc:malloc -aR sleep 1
Make use of it to create a call graph (as the flat profile is going to
look very boring):
$ perf record -e probe_libc:malloc -gR make
[ perf record: Woken up 173 times to write data ]
[ perf record: Captured and wrote 44.190 MB perf.data (~1930712
$ perf report | less
32.03% git libc-2.15.so [.] malloc
|
--- malloc
29.49% cc1 libc-2.15.so [.] malloc
|
--- malloc
|
|--0.95%-- 0x208eb1000000000
|
|--0.63%-- htab_traverse_noresize
11.04% as libc-2.15.so [.] malloc
|
--- malloc
|
7.15% ld libc-2.15.so [.] malloc
|
--- malloc
|
5.07% sh libc-2.15.so [.] malloc
|
--- malloc
|
4.99% python-config libc-2.15.so [.] malloc
|
--- malloc
|
4.54% make libc-2.15.so [.] malloc
|
--- malloc
|
|--7.34%-- glob
| |
| |--93.18%-- 0x41588f
| |
| --6.82%-- glob
| 0x41588f
...
Or:
$ perf report -g flat | less
# Overhead Command Shared Object Symbol
# ........ ............. ............. ..........
#
32.03% git libc-2.15.so [.] malloc
27.19%
malloc
29.49% cc1 libc-2.15.so [.] malloc
24.77%
malloc
11.04% as libc-2.15.so [.] malloc
11.02%
malloc
7.15% ld libc-2.15.so [.] malloc
6.57%
malloc
...
The core uprobes design is fairly straightforward: uprobes probe
points register themselves at (inode:offset) addresses of
libraries/binaries, after which all existing (or new) vmas that map
that address will have a software breakpoint injected at that address.
vmas are COW-ed to preserve original content. The probe points are
kept in an rbtree.
If user-space executes the probed inode:offset instruction address
then an event is generated which can be recovered from the regular
perf event channels and mmap-ed ring-buffer.
Multiple probes at the same address are supported, they create a
dynamic callback list of event consumers.
The basic model is further complicated by the XOL speedup: the
original instruction that is probed is copied (in an architecture
specific fashion) and executed out of line when the probe triggers.
The XOL area is a single vma per process, with a fixed number of
entries (which limits probe execution parallelism).
The API: uprobes are installed/removed via
/sys/kernel/debug/tracing/uprobe_events, the API is integrated to
align with the kprobes interface as much as possible, but is separate
to it.
Injecting a probe point is privileged operation, which can be relaxed
by setting perf_paranoid to -1.
You can use multiple probes as well and mix them with kprobes and
regular PMU events or tracepoints, when instrumenting a task."
Fix up trivial conflicts in mm/memory.c due to previous cleanup of
unmap_single_vma().
* 'perf-uprobes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf probe: Detect probe target when m/x options are absent
perf probe: Provide perf interface for uprobes
tracing: Fix kconfig warning due to a typo
tracing: Provide trace events interface for uprobes
tracing: Extract out common code for kprobes/uprobes trace events
tracing: Modify is_delete, is_return from int to bool
uprobes/core: Decrement uprobe count before the pages are unmapped
uprobes/core: Make background page replacement logic account for rss_stat counters
uprobes/core: Optimize probe hits with the help of a counter
uprobes/core: Allocate XOL slots for uprobes use
uprobes/core: Handle breakpoint and singlestep exceptions
uprobes/core: Rename bkpt to swbp
uprobes/core: Make order of function parameters consistent across functions
uprobes/core: Make macro names consistent
uprobes: Update copyright notices
uprobes/core: Move insn to arch specific structure
uprobes/core: Remove uprobe_opcode_sz
uprobes/core: Make instruction tables volatile
uprobes: Move to kernel/events/
uprobes/core: Clean up, refactor and improve the code
...
Pull an ftrace ring-buffer fix from Steve Rostedt:
* fix kernel crash when changing the size of the ring-buffer on
boxes where possible_cpus != online_cpus.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On some machines the number of possible CPUS is not the same as the
number of CPUs that is on the machine. Ftrace uses possible_cpus to
update the tracing structures but the ring buffer only allocates
per cpu buffers for online CPUs when they come up.
When the wakeup tracer was enabled in such a case, the ftrace code
enabled all possible cpu buffers, but the code in ring_buffer_resize()
did not check to see if the buffer in question was allocated. Since
boot up CPUs did not match possible CPUs it caused the following
crash:
BUG: unable to handle kernel NULL pointer dereference at 00000020
IP: [<c1097851>] ring_buffer_resize+0x16a/0x28d
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in: [last unloaded: scsi_wait_scan]
Pid: 1387, comm: bash Not tainted 3.4.0-test+ #13 /DG965MQ
EIP: 0060:[<c1097851>] EFLAGS: 00010217 CPU: 0
EIP is at ring_buffer_resize+0x16a/0x28d
EAX: f5a14340 EBX: f6026b80 ECX: 00000ff4 EDX: 00000ff3
ESI: 00000000 EDI: 00000002 EBP: f4275ecc ESP: f4275eb0
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
CR0: 80050033 CR2: 00000020 CR3: 34396000 CR4: 000007d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
Process bash (pid: 1387, ti=f4274000 task=f4380cb0 task.ti=f4274000)
Stack:
c109cf9a f6026b98 00000162 00160f68 00000006 00160f68 00000002 f4275ef0
c109d013 f4275ee8 c123b72a c1c0bf00 c1cc81dc 00000005 f4275f98 00000007
f4275f70 c109d0c7 7700000e 75656b61 00000070 f5e90900 f5c4e198 00000301
Call Trace:
[<c109cf9a>] ? tracing_set_tracer+0x115/0x1e9
[<c109d013>] tracing_set_tracer+0x18e/0x1e9
[<c123b72a>] ? _copy_from_user+0x30/0x46
[<c109d0c7>] tracing_set_trace_write+0x59/0x7f
[<c10ec01e>] ? fput+0x18/0x1c6
[<c11f8732>] ? security_file_permission+0x27/0x2b
[<c10eaacd>] ? rw_verify_area+0xcf/0xf2
[<c10ec01e>] ? fput+0x18/0x1c6
[<c109d06e>] ? tracing_set_tracer+0x1e9/0x1e9
[<c10ead77>] vfs_write+0x8b/0xe3
[<c10ebead>] ? fget_light+0x30/0x81
[<c10eaf54>] sys_write+0x42/0x63
[<c1834fbf>] sysenter_do_call+0x12/0x28
This happens with the latency tracer as the ftrace code updates the
saved max buffer via its cpumask and not with a global setting.
Adding a check in ring_buffer_resize() to make sure the buffer being resized
exists, fixes the problem.
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull trivial updates from Jiri Kosina:
"As usual, it's mostly typo fixes, redundant code elimination and some
documentation updates."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits)
edac, mips: don't change code that has been removed in edac/mips tree
xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer
lib: Change mail address of Oskar Schirmer
net: Change mail address of Oskar Schirmer
arm/m68k: Change mail address of Sebastian Hess
i2c: Change mail address of Oskar Schirmer
net: Fix tcp_build_and_update_options comment in struct tcp_sock
atomic64_32.h: fix parameter naming mismatch
Kconfig: replace "--- help ---" with "---help---"
c2port: fix bogus Kconfig "default no"
edac: Fix spelling errors.
qla1280: Remove redundant NULL check before release_firmware() call
remoteproc: remove redundant NULL check before release_firmware()
qla2xxx: Remove redundant NULL check before release_firmware() call.
aic94xx: Get rid of redundant NULL check before release_firmware() call
tehuti: delete redundant NULL check before release_firmware()
qlogic: get rid of a redundant test for NULL before call to release_firmware()
bna: remove redundant NULL test before release_firmware()
tg3: remove redundant NULL test before release_firmware() call
typhoon: get rid of redundant conditional before all to release_firmware()
...
Pull perf changes from Ingo Molnar:
"Lots of changes:
- (much) improved assembly annotation support in perf report, with
jump visualization, searching, navigation, visual output
improvements and more.
- kernel support for AMD IBS PMU hardware features. Notably 'perf
record -e cycles:p' and 'perf top -e cycles:p' should work without
skid now, like PEBS does on the Intel side, because it takes
advantage of IBS transparently.
- the libtracevents library: it is the first step towards unifying
tracing tooling and perf, and it also gives a tracing library for
external tools like powertop to rely on.
- infrastructure: various improvements and refactoring of the UI
modules and related code
- infrastructure: cleanup and simplification of the profiling
targets code (--uid, --pid, --tid, --cpu, --all-cpus, etc.)
- tons of robustness fixes all around
- various ftrace updates: speedups, cleanups, robustness
improvements.
- typing 'make' in tools/ will now give you a menu of projects to
build and a short help text to explain what each does.
- ... and lots of other changes I forgot to list.
The perf record make bzImage + perf report regression you reported
should be fixed."
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (166 commits)
tracing: Remove kernel_lock annotations
tracing: Fix initial buffer_size_kb state
ring-buffer: Merge separate resize loops
perf evsel: Create events initially disabled -- again
perf tools: Split term type into value type and term type
perf hists: Fix callchain ip printf format
perf target: Add uses_mmap field
ftrace: Remove selecting FRAME_POINTER with FUNCTION_TRACER
ftrace/x86: Have x86 ftrace use the ftrace_modify_all_code()
ftrace: Make ftrace_modify_all_code() global for archs to use
ftrace: Return record ip addr for ftrace_location()
ftrace: Consolidate ftrace_location() and ftrace_text_reserved()
ftrace: Speed up search by skipping pages by address
ftrace: Remove extra helper functions
ftrace: Sort all function addresses, not just per page
tracing: change CPU ring buffer state from tracing_cpumask
tracing: Check return value of tracing_dentry_percpu()
ring-buffer: Reset head page before running self test
ring-buffer: Add integrity check at end of iter read
ring-buffer: Make addition of pages in ring buffer atomic
...
Pull workqueue changes from Tejun Heo:
"Nothing exciting. Most are updates to debug stuff and related fixes.
Two not-too-critical bugs are fixed - WARN_ON() triggering spurious
during cpu offlining and unlikely lockdep related oops."
* 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
lockdep: fix oops in processing workqueue
workqueue: skip nr_running sanity check in worker_enter_idle() if trustee is active
workqueue: Catch more locking problems with flush_work()
workqueue: change BUG_ON() to WARN_ON()
trace: Remove unused workqueue tracer
Fixes for perf/core:
- Rename some perf_target methods to avoid double negation, from Namhyung Kim.
- Revert change to use per task events with inheritance, from Namhyung Kim.
- Events should start disabled till children starts running, from David Ahern.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make sure that the state of buffer_size_kb is initialized correctly and
returns actual size of the ring buffer.
Link: http://lkml.kernel.org/r/1336066834-1673-1-git-send-email-vnagarnaik@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are 2 separate loops to resize cpu buffers that are online and
offline. Merge them to make the code look better.
Also change the name from update_completion to update_done to allow
shorter lines.
Link: http://lkml.kernel.org/r/1337372991-14783-1-git-send-email-vnagarnaik@google.com
Cc: Laurent Chavey <chavey@google.com>
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Merge reason: We are going to queue up a dependent patch:
"perf tools: Move parse event automated tests to separated object"
That depends on:
commit e7c72d8
perf tools: Add 'G' and 'H' modifiers to event parsing
Conflicts:
tools/perf/builtin-stat.c
Conflicted with the recent 'perf_target' patches when checking the
result of perf_evsel open routines to see if a retry is needed to cope
with older kernels where the exclude guest/host perf_event_attr bits
were not used.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The function tracer will enable the -pg option with gcc, which requires
that frame pointers. When FRAME_POINTER is defined in the kernel config
it adds the gcc option -fno-omit-frame-pointer which causes some problems
on some architectures. For those architectures, the FRAME_POINTER select
was not set.
When FUNCTION_TRACER was selected on these architectures that can not have
-fno-omit-frame-pointer, the -pg option is still set. But when
FRAME_POINTER is not selected, the kernel config would add the gcc option
-fomit-frame-pointer. Adding this option is incompatible with -pg
even on archs that do not need frame pointers with -pg.
The answer to this was to just not add either -fno-omit-frame-pointer
or -fomit-frame-pointer on these archs that want function tracing
but do not set FRAME_POINTER.
As it turns out, for archs that require frame pointers for function
tracing, the same can be used. If gcc requires frame pointers with
-pg, it will simply add it. The best thing to do is not select FRAME_POINTER
when function tracing is selected, and let gcc add it if needed.
Only add the -fno-omit-frame-pointer when something else selects
FRAME_POINTER, but do not add -fomit-frame-pointer if function tracing
is selected.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
To remove duplicate code, have the ftrace arch_ftrace_update_code()
use the generic ftrace_modify_all_code(). This requires that the
default ftrace_replace_code() becomes a weak function so that an
arch may override it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Rename __ftrace_modify_code() to ftrace_modify_all_code() and make
it global for all archs to use. This will remove the duplication
of code, as archs that can modify code without stop_machine()
can use it directly outside of the stop_machine() call.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_location() is passed an addr, and returns 1 if the addr is
on a ftrace nop (or caller to ftrace_caller), and 0 otherwise.
To let kprobes know if it should move a breakpoint or not, it
must return the actual addr that is the start of the ftrace nop.
This way a kprobe placed on the location of a ftrace nop, can
instead be placed on the instruction after the nop. Even if the
probe addr is on the second or later byte of the nop, it can
simply be moved forward.
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Both ftrace_location() and ftrace_text_reserved() do basically the same thing.
They search to see if an address is in the ftace table (contains an address
that may change from nop to call ftrace_caller). The difference is
that ftrace_location() searches a single address, but ftrace_text_reserved()
searches a range.
This also makes the ftrace_text_reserved() faster as it now uses a bsearch()
instead of linearly searching all the addresses within a page.
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As all records in a page of the ftrace table are sorted, we can
speed up the search algorithm by checking if the address to look for
falls in between the first and last record ip on the page.
This speeds up both the ftrace_location() and ftrace_text_reserved()
algorithms, as it can skip full pages when the search address is
not in them.
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace_record_ip() and ftrace_alloc_dyn_node() were from the
time of the ftrace daemon. Although they were still used, they
still make things a bit more complex than necessary.
Move the code into the one function that uses it, and remove the
helper functions.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Instead of just sorting the ip's of the functions per ftrace page,
sort the entire list before adding them to the ftrace pages.
This will allow the bsearch algorithm to be sped up as it can
also sort by pages, not just records within a page.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
According to Documentation/trace/ftrace.txt:
tracing_cpumask:
This is a mask that lets the user only trace
on specified CPUS. The format is a hex string
representing the CPUS.
The tracing_cpumask currently doesn't affect the tracing state of
per-CPU ring buffers.
This patch enables/disables CPU recording as its corresponding bit in
tracing_cpumask is set/unset.
Link: http://lkml.kernel.org/r/1336096792-25373-3-git-send-email-vnagarnaik@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If tracing_dentry_percpu() failed, tracing_init_debugfs_percpu()
will try to create each cpu directories on debugfs' root directory
as d_percpu is NULL.
Link: http://lkml.kernel.org/r/1335143517-2285-1-git-send-email-namhyung.kim@lge.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the ring buffer does its consistency test on itself, it
removes the head page, runs the tests, and then adds it back
to what the "head_page" pointer was. But because the head_page
pointer may lack behind the real head page (held by the link
list pointer). The reset may be incorrect.
Instead, if the head_page exists (it does not on first allocation)
reset it back to the real head page before running the consistency
tests. Then it will be put back to its original location after
the tests are complete.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There use to be ring buffer integrity checks after updating the
size of the ring buffer. But now that the ring buffer can modify
the size while the system is running, the integrity checks were
removed, as they require the ring buffer to be disabed to perform
the check.
Move the integrity check to the reading of the ring buffer via the
iterator reads (the "trace" file). As reading via an iterator requires
disabling the ring buffer, it is a perfect place to have it.
If the ring buffer happens to be disabled when updating the size,
we still perform the integrity check.
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds the capability to add new pages to a ring buffer
atomically while write operations are going on. This makes it possible
to expand the ring buffer size without reinitializing the ring buffer.
The new pages are attached between the head page and its previous page.
Link: http://lkml.kernel.org/r/1336096792-25373-2-git-send-email-vnagarnaik@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds the capability to remove pages from a ring buffer
without destroying any existing data in it.
This is done by removing the pages after the tail page. This makes sure
that first all the empty pages in the ring buffer are removed. If the
head page is one in the list of pages to be removed, then the page after
the removed ones is made the head page. This removes the oldest data
from the ring buffer and keeps the latest data around to be read.
To do this in a non-racey manner, tracing is stopped for a very short
time while the pages to be removed are identified and unlinked from the
ring buffer. The pages are freed after the tracing is restarted to
minimize the time needed to stop tracing.
The context in which the pages from the per-cpu ring buffer are removed
runs on the respective CPU. This minimizes the events not traced to only
NMI trace contexts.
Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On gcc 4.5 the function tracing_mark_write() would give a warning
of page2 being uninitialized. This is due to a bug in gcc because
the logic prevents page2 from being used uninitialized, and
gcc 4.6+ does not complain (correctly).
Instead of adding a "unitialized" around page2, which could show
a bug later on, I combined page1 and page2 into an array map_pages[].
This binds the two and the two are modified according to nr_pages
(what gcc 4.5 seems to ignore). This no longer gives a warning with
gcc 4.5 nor with gcc 4.6.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the adding of function tracing event to perf, it caused a
side effect that produces the following warning when enabling all
events in ftrace:
# echo 1 > /sys/kernel/debug/tracing/events/enable
[console]
event trace: Could not enable event function
This is because when enabling all events via the debugfs system
it ignores events that do not have a ->reg() function assigned.
This was to skip over the ftrace internal events (as they are
not TRACE_EVENTs). But as the ftrace function event now has
a ->reg() function attached to it for use with perf, it is no
longer ignored.
Worse yet, this ->reg() function is being called when it should
not be. It returns an error and causes the above warning to
be printed.
By adding a new event_call flag (TRACE_EVENT_FL_IGNORE_ENABLE)
and have all ftrace internel event structures have it set,
setting the events/enable will no longe try to incorrectly enable
the function event and does not warn.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace_disable_cpu() and ftrace_enable_cpu() functions were
needed back before the ring buffer was lockless. Now that the
ring buffer is lockless (and has been for some time), these functions
serve no purpose, and unnecessarily slow down operations of the tracer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It's appropriate to use __seq_open_private interface to open
some of trace seq files, because it covers all steps we are
duplicating in tracing code - zallocating the iterator and
setting it as seq_file's private.
Using this for following files:
trace
available_filter_functions
enabled_functions
Link: http://lkml.kernel.org/r/1335342219-2782-5-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
[
Fixed warnings for:
kernel/trace/trace.c: In function '__tracing_open':
kernel/trace/trace.c:2418:11: warning: unused variable 'ret' [-Wunused-variable]
kernel/trace/trace.c:2417:19: warning: unused variable 'm' [-Wunused-variable]
]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Implements trace_event support for uprobes. In its current form
it can be used to put probes at a specified offset in a file and
dump the required registers when the code flow reaches the
probed address.
The following example shows how to dump the instruction pointer
and %ax a register at the probed text address. Here we are
trying to probe zfree in /bin/zsh:
# cd /sys/kernel/debug/tracing/
# cat /proc/`pgrep zsh`/maps | grep /bin/zsh | grep r-xp
00400000-0048a000 r-xp 00000000 08:03 130904 /bin/zsh
# objdump -T /bin/zsh | grep -w zfree
0000000000446420 g DF .text 0000000000000012 Base
zfree # echo 'p /bin/zsh:0x46420 %ip %ax' > uprobe_events
# cat uprobe_events
p:uprobes/p_zsh_0x46420 /bin/zsh:0x0000000000046420
# echo 1 > events/uprobes/enable
# sleep 20
# echo 0 > events/uprobes/enable
# cat trace
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
zsh-24842 [006] 258544.995456: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
zsh-24842 [007] 258545.000270: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
zsh-24842 [002] 258545.043929: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
zsh-24842 [004] 258547.046129: p_zsh_0x46420: (0x446420) arg1=446421 arg2=79
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120411103043.GB29437@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move parts of trace_kprobe.c that can be shared with upcoming
trace_uprobe.c. Common code to kernel/trace/trace_probe.h and
kernel/trace/trace_probe.c. There are no functional changes.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120409091144.8343.76218.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
is_delete and is_return can take utmost 2 values and are better
of being a boolean than a int. There are no functional changes.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Anton Arapov <anton@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120409091133.8343.65289.sendpatchset@srdronam.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a debugfs entry under per_cpu/ folder for each cpu called
buffer_size_kb to control the ring buffer size for each CPU
independently.
If the global file buffer_size_kb is used to set size, the individual
ring buffers will be adjusted to the given size. The buffer_size_kb will
report the common size to maintain backward compatibility.
If the buffer_size_kb file under the per_cpu/ directory is used to
change buffer size for a specific CPU, only the size of the respective
ring buffer is updated. When tracing/buffer_size_kb is read, it reports
'X' to indicate that sizes of per_cpu ring buffers are not equivalent.
Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Justin Teravest <teravest@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
memcpy() returns a pointer to "bug". Hopefully, it's not NULL here or
we would already have Oopsed.
Link: http://lkml.kernel.org/r/20120420063145.GA22649@elgon.mountain
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, trace_printk() uses a single buffer to write into
to calculate the size and format needed to save the trace. To
do this safely in an SMP environment, a spin_lock() is taken
to only allow one writer at a time to the buffer. But this could
also affect what is being traced, and add synchronization that
would not be there otherwise.
Ideally, using percpu buffers would be useful, but since trace_printk()
is only used in development, having per cpu buffers for something
never used is a waste of space. Thus, the use of the trace_bprintk()
format section is changed to be used for static fmts as well as dynamic ones.
Then at boot up, we can check if the section that holds the trace_printk
formats is non-empty, and if it does contain something, then we
know a trace_printk() has been added to the kernel. At this time
the trace_printk per cpu buffers are allocated. A check is also
done at module load time in case a module is added that contains a
trace_printk().
Once the buffers are allocated, they are never freed. If you use
a trace_printk() then you should know what you are doing.
A buffer is made for each type of context:
normal
softirq
irq
nmi
The context is checked and the appropriate buffer is used.
This allows for totally lockless usage of trace_printk(),
and they no longer even disable interrupts.
Requested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
While debugging a latency with someone on IRC (mirage335) on #linux-rt (OFTC),
we discovered that the stacktrace output of the latency tracers
(preemptirqsoff) was empty.
This bug was caused by the creation of the dynamic length stack trace
again (like commit 12b5da3 "tracing: Fix ent_size in trace output" was).
This bug is caused by the latency tracers requiring the next event
to determine the time between the current event and the next. But by
grabbing the next event, the iter->ent_size is set to the next event
instead of the current one. As the stacktrace event is the last event,
this makes the ent_size zero and causes nothing to be printed for
the stack trace. The dynamic stacktrace uses the ent_size to determine
how much of the stack can be printed. The ent_size of zero means
no stack.
The simple fix is to save the iter->ent_size before finding the next event.
Note, mirage335 asked to remain anonymous from LKML and git, so I will
not add the Reported-by and Tested-by tags, even though he did report
the issue and tested the fix.
Cc: stable@vger.kernel.org # 3.1+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The change to make tracing_on affect only the ftrace ring buffer, caused
a bug where it wont affect any ring buffer. The problem was that the buffer
of the trace_array was passed to the write function and not the trace array
itself.
The trace_array can change the buffer when running a latency tracer. If this
happens, then the buffer being disabled may not be the buffer currently used
by ftrace. This will cause the tracing_on file to become useless.
The simple fix is to pass the trace_array to the write function instead of
the buffer. Then the actual buffer may be changed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Today's -next fails to link for me:
kernel/built-in.o:(.data+0x178e50): undefined reference to `perf_ftrace_event_register'
It looks like multiple fixes have been merged for the issue fixed by
commit fa73dc9 (tracing: Fix build breakage without CONFIG_PERF_EVENTS)
though I can't identify the other changes that have gone in at the
minute, it's possible that the changes which caused the breakage fixed
by the previous commit got dropped but the fix made it in.
Link: http://lkml.kernel.org/r/1334307179-21255-1-git-send-email-broonie@opensource.wolfsonmicro.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This tracer was temporarily removed in 6416669 (workqueue:
temporarily remove workqueue tracing, 2010-06-29) but never
reinstated after concurrency managed workqueues were completed.
For almost two years it hasn't been compilable so it seems nobody
is using it. Delete it.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Merge batch of fixes from Andrew Morton:
"The simple_open() cleanup was held back while I wanted for laggards to
merge things.
I still need to send a few checkpoint/restore patches. I've been
wobbly about merging them because I'm wobbly about the overall
prospects for success of the project. But after speaking with Pavel
at the LSF conference, it sounds like they're further toward
completion than I feared - apparently davem is at the "has stopped
complaining" stage regarding the net changes. So I need to go back
and re-review those patchs and their (lengthy) discussion."
* emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches)
memcg swap: use mem_cgroup_uncharge_swap fix
backlight: add driver for DA9052/53 PMIC v1
C6X: use set_current_blocked() and block_sigmask()
MAINTAINERS: add entry for sparse checker
MAINTAINERS: fix REMOTEPROC F: typo
alpha: use set_current_blocked() and block_sigmask()
simple_open: automatically convert to simple_open()
scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open()
libfs: add simple_open()
hugetlbfs: remove unregister_filesystem() when initializing module
drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback
fs/xattr.c:setxattr(): improve handling of allocation failures
fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed
fs/xattr.c: suppress page allocation failure warnings from sys_listxattr()
sysrq: use SEND_SIG_FORCED instead of force_sig()
proc: fix mount -t proc -o AAA
Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op. This leads to a
proliferation of the default_open() implementation across the entire
tree.
Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().
This replacement was done with the following semantic patch:
<smpl>
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i->i_private)
-f->private_data = i->i_private;
|
-f->private_data = i->i_private;
)
-return 0;
-}
@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
</smpl>
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When reading the trace file, the records of each of the per_cpu buffers
are examined to find the next event to print out. At the point of looking
at the event, the size of the event is recorded. But if the first event is
chosen, the other events in the other CPU buffers will reset the event size
that is stored in the iterator descriptor, causing the event size passed to
the output functions to be incorrect.
In most cases this is not a problem, but for the case of stack traces, it
is. With the change to the stack tracing to record a dynamic number of
back traces, the output depends on the size of the entry instead of the
fixed 8 back traces. When the entry size is not correct, the back traces
would not be fully printed.
Note, reading from the per-cpu trace files were not affected.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull vfs pile 1 from Al Viro:
"This is _not_ all; in particular, Miklos' and Jan's stuff is not there
yet."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits)
ext4: initialization of ext4_li_mtx needs to be done earlier
debugfs-related mode_t whack-a-mole
hfsplus: add an ioctl to bless files
hfsplus: change finder_info to u32
hfsplus: initialise userflags
qnx4: new helper - try_extent()
qnx4: get rid of qnx4_bread/qnx4_getblk
take removal of PF_FORKNOEXEC to flush_old_exec()
trim includes in inode.c
um: uml_dup_mmap() relies on ->mmap_sem being held, but activate_mm() doesn't hold it
um: embed ->stub_pages[] into mmu_context
gadgetfs: list_for_each_safe() misuse
ocfs2: fix leaks on failure exits in module_init
ecryptfs: make register_filesystem() the last potential failure exit
ntfs: forgets to unregister sysctls on register_filesystem() failure
logfs: missing cleanup on register_filesystem() failure
jfs: mising cleanup on register_filesystem() failure
make configfs_pin_fs() return root dentry on success
configfs: configfs_create_dir() has parent dentry in dentry->d_parent
configfs: sanitize configfs_create()
...
Today's -next fails to build for me:
CC kernel/trace/trace_export.o
In file included from kernel/trace/trace_export.c:197: kernel/trace/trace_entries.h:58: error: 'perf_ftrace_event_register' undeclared here (not in a function)
make[2]: *** [kernel/trace/trace_export.o] Error 1
make[1]: *** [kernel/trace] Error 2
make: *** [kernel] Error 2
because as of ced390 (ftrace, perf: Add support to use function
tracepoint in perf) perf_trace_event_register() is declared in trace.h
only if CONFIG_PERF_EVENTS is enabled but I don't have that set.
Ensure that we always have a definition of perf_trace_event_register()
by making the definition unconditional.
Link: http://lkml.kernel.org/r/1330426967-17067-1-git-send-email-broonie@opensource.wolfsonmicro.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When CONFIG_DYNAMIC_FTRACE is not set, some archs (ARM) test
the variable function_trace_function to determine if it should
call the function tracer. If it is not set to ftrace_stub, then
it will call the function and return, and not call the function
graph tracer.
But some of these archs (ARM) do not have the assembly code
to test if function tracing is enabled or not (quick stop of tracing)
and it calls the helper routine ftrace_test_stop_func() instead.
If function tracer is enabled and then disabled, the variable
ftrace_trace_function is still set to the helper routine
ftrace_test_stop_func(), and not to ftrace_stub. This will
prevent the function graph tracer from ever running.
Output before patch
/debug/tracing # echo function > current_tracer
/debug/tracing # echo function_graph > current_tracer
/debug/tracing # cat trace
Output after patch
/debug/tracing # echo function > current_tracer
/debug/tracing # echo function_graph > current_tracer
/debug/tracing # cat trace
0) ! 253.375 us | } /* irq_enter */
0) | generic_handle_irq() {
0) | handle_fasteoi_irq() {
0) 9.208 us | _raw_spin_lock();
0) | handle_irq_event() {
0) | handle_irq_event_percpu() {
Signed-off-by: Rajesh Bhagat <rajesh.lnx@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As ftrace_dump() (called by ftrace_dump_on_oops) disables interrupts
as it dumps its output to the console, it can keep interrupts disabled
for long periods of time. This is likely to trigger the NMI watchdog,
and it can disrupt the output of critical data.
Add a touch_nmi_watchdog() to each event that is written to the screen
to keep the NMI watchdog from affecting the output.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On PowerPC, FUNCTION_TRACER selects FRAME_POINTER, even
though the architecture does not support it.
This causes the following warning:
warning: (LOCKDEP && FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP && FUNCTION_TRACER && KMEMCHECK) selects FRAME_POINTER which has unmet direct dependencies (DEBUG_KERNEL && (CRIS || M68K || FRV || UML || AVR32 || SUPERH || BLACKFIN || MN10300) || ARCH_WANT_FRAME_POINTERS)
So remove the warning by adding the extra condition
"if !PPC" to FUNCTION_TRACER for FRAME_POINTER selection
Link: http://lkml.kernel.org/r/1330330101-8618-1-git-send-email-gerlando.falauto@keymile.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As the ring-buffer code is being used by other facilities in the
kernel, having tracing_on file disable *all* buffers is not a desired
affect. It should only disable the ftrace buffers that are being used.
Move the code into the trace.c file and use the buffer disabling
for tracing_on() and tracing_off(). This way only the ftrace buffers
will be affected by them and other kernel utilities will not be
confused to why their output suddenly stopped.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding support to filter function trace event via perf
interface. It is now possible to use filter interface
in the perf tool like:
perf record -e ftrace:function --filter="(ip == mm_*)" ls
The filter syntax is restricted to the the 'ip' field only,
and following operators are accepted '==' '!=' '||', ending
up with the filter strings like:
ip == f1[, ]f2 ... || ip != f3[, ]f4 ...
with comma ',' or space ' ' as a function separator. If the
space ' ' is used as a separator, the right side of the
assignment needs to be enclosed in double quotes '"', e.g.:
perf record -e ftrace:function --filter '(ip == do_execve,sys_*,ext*)' ls
perf record -e ftrace:function --filter '(ip == "do_execve,sys_*,ext*")' ls
perf record -e ftrace:function --filter '(ip == "do_execve sys_* ext*")' ls
The '==' operator adds trace filter with same effect as would
be added via set_ftrace_filter file.
The '!=' operator adds trace filter with same effect as would
be added via set_ftrace_notrace file.
The right side of the '!=', '==' operators is list of functions
or regexp. to be added to filter separated by space.
The '||' operator is used for connecting multiple filter definitions
together. It is possible to have more than one '==' and '!='
operators within one filter string.
Link: http://lkml.kernel.org/r/1329317514-8131-8-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding FILTER_TRACE_FN event field type for function tracepoint
event, so it can be properly recognized within filtering code.
Currently all fields of ftrace subsystem events share the common
field type FILTER_OTHER. Since the function trace fields need
special care within the filtering code we need to recognize it
properly, hence adding the FILTER_TRACE_FN event type.
Adding filter parameter to the FTRACE_ENTRY macro, to specify the
filter field type for the event.
Link: http://lkml.kernel.org/r/1329317514-8131-7-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding perf registration support for the ftrace function event,
so it is now possible to register it via perf interface.
The perf_event struct statically contains ftrace_ops as a handle
for function tracer. The function tracer is registered/unregistered
in open/close actions.
To be efficient, we enable/disable ftrace_ops each time the traced
process is scheduled in/out (via TRACE_REG_PERF_(ADD|DELL) handlers).
This way tracing is enabled only when the process is running.
Intentionally using this way instead of the event's hw state
PERF_HES_STOPPED, which would not disable the ftrace_ops.
It is now possible to use function trace within perf commands
like:
perf record -e ftrace:function ls
perf stat -e ftrace:function ls
Allowed only for root.
Link: http://lkml.kernel.org/r/1329317514-8131-6-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding FTRACE_ENTRY_REG macro so particular ftrace entries
could specify registration function and thus become accesible
via perf.
This will be used in upcomming patch for function trace.
Link: http://lkml.kernel.org/r/1329317514-8131-5-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding TRACE_REG_PERF_ADD and TRACE_REG_PERF_DEL to handle
perf event schedule in/out actions.
The add action is invoked for when the perf event is scheduled in,
while the del action is invoked when the event is scheduled out.
Link: http://lkml.kernel.org/r/1329317514-8131-4-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding TRACE_REG_PERF_OPEN and TRACE_REG_PERF_CLOSE to differentiate
register/unregister from open/close actions.
The register/unregister actions are invoked for the first/last
tracepoint user when opening/closing the event.
The open/close actions are invoked for each tracepoint user when
opening/closing the event.
Link: http://lkml.kernel.org/r/1329317514-8131-3-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding a way to temporarily enable/disable ftrace_ops. The change
follows the same way as 'global' ftrace_ops are done.
Introducing 2 global ftrace_ops - control_ops and ftrace_control_list
which take over all ftrace_ops registered with FTRACE_OPS_FL_CONTROL
flag. In addition new per cpu flag called 'disabled' is also added to
ftrace_ops to provide the control information for each cpu.
When ftrace_ops with FTRACE_OPS_FL_CONTROL is registered, it is
set as disabled for all cpus.
The ftrace_control_list contains all the registered 'control' ftrace_ops.
The control_ops provides function which iterates ftrace_control_list
and does the check for 'disabled' flag on current cpu.
Adding 3 inline functions:
ftrace_function_local_disable/ftrace_function_local_enable
- enable/disable the ftrace_ops on current cpu
ftrace_function_local_disabled
- get disabled ftrace_ops::disabled value for current cpu
Link: http://lkml.kernel.org/r/1329317514-8131-2-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If more than one __print_*() function is used in a tracepoint
(__print_flags(), __print_symbols(), etc), then the temp seq buffer will
not be zero on entry. Using the temp seq buffer's length to know if
data has been printed or not in the current function is incorrect and
may produce incorrect results.
Currently, no in-tree tracepoint causes this bug, but new ones may
be created.
Cc: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If __print_flags() is used after another __print_*() function, the
temp seq_file buffer will not be empty on entry, and the delimiter will
be printed even though there's just one field. We get something like:
|S
instead of just:
S
This is because the length of the temp seq buffer is used to determine
if the delimiter is printed or not. But this algorithm fails when
the seq buffer is not empty on entry, and the delimiter will be printed
because it thinks that a previous field was already printed.
Link: http://lkml.kernel.org/r/1329650167-480655-1-git-send-email-avagin@openvz.org
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The advantage of kcalloc is, that will prevent integer overflows which could
result from the multiplication of number of elements and size and it is also
a bit nicer to read.
The semantic patch that makes this change is available
in https://lkml.org/lkml/2011/11/25/107
Link: http://lkml.kernel.org/r/1322600880.1534.347.camel@localhost.localdomain
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Actually, sched_switch function tracer is merged into wakeup/wakeup_rt
Update 'mini-HOWTO' for ftrace(Kernel function tracer).
If we want to trace "sched:sched_switch" to trace sched_switch func,
We may utilize event option.(e.g: trace-cmd list -e | grep sched)
This patch is based on Linux-3.3.rc2-SMP-PREEMPT
Link: http://lkml.kernel.org/r/1328695537-15081-1-git-send-email-geunsik.lim@gmail.com
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Geunsik Lim <geunsik.lim@samsung.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the ftrace_set_filter and ftrace_set_notrace functions
do not return any return code. So there's no way for ftrace_ops
user to tell wether the filter was correctly applied.
The set_ftrace_filter interface returns error in case the filter
did not match:
# echo krava > set_ftrace_filter
bash: echo: write error: Invalid argument
Changing both ftrace_set_filter and ftrace_set_notrace functions
to return zero if the filter was applied correctly or -E* values
in case of error.
Link: http://lkml.kernel.org/r/1325495060-6402-2-git-send-email-jolsa@redhat.com
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
perf tools: Fix compile error on x86_64 Ubuntu
perf report: Fix --stdio output alignment when --showcpuutilization used
perf annotate: Get rid of field_sep check
perf annotate: Fix usage string
perf kmem: Fix a memory leak
perf kmem: Add missing closedir() calls
perf top: Add error message for EMFILE
perf test: Change type of '-v' option to INCR
perf script: Add missing closedir() calls
tracing: Fix compile error when static ftrace is enabled
recordmcount: Fix handling of elf64 big-endian objects.
perf tools: Add const.h to MANIFEST to make perf-tar-src-pkg work again
perf tools: Add support for guest/host-only profiling
perf kvm: Do guest-only counting by default
perf top: Don't update total_period on process_sample
perf hists: Stop using 'self' for struct hist_entry
perf hists: Rename total_session to total_period
x86: Add counter when debug stack is used with interrupts enabled
x86: Allow NMIs to hit breakpoints in i386
x86: Keep current stack in NMI breakpoints
...
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits)
reiserfs: Properly display mount options in /proc/mounts
vfs: prevent remount read-only if pending removes
vfs: count unlinked inodes
vfs: protect remounting superblock read-only
vfs: keep list of mounts for each superblock
vfs: switch ->show_options() to struct dentry *
vfs: switch ->show_path() to struct dentry *
vfs: switch ->show_devname() to struct dentry *
vfs: switch ->show_stats to struct dentry *
switch security_path_chmod() to struct path *
vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
vfs: trim includes a bit
switch mnt_namespace ->root to struct mount
vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
vfs: opencode mntget() mnt_set_mountpoint()
vfs: spread struct mount - remaining argument of next_mnt()
vfs: move fsnotify junk to struct mount
vfs: move mnt_devname
vfs: move mnt_list to struct mount
vfs: switch pnode.h macros to struct mount *
...
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (106 commits)
perf kvm: Fix copy & paste error in description
perf script: Kill script_spec__delete
perf top: Fix a memory leak
perf stat: Introduce get_ratio_color() helper
perf session: Remove impossible condition check
perf tools: Fix feature-bits rework fallout, remove unused variable
perf script: Add generic perl handler to process events
perf tools: Use for_each_set_bit() to iterate over feature flags
perf tools: Unify handling of features when writing feature section
perf report: Accept fifos as input file
perf tools: Moving code in some files
perf tools: Fix out-of-bound access to struct perf_session
perf tools: Continue processing header on unknown features
perf tools: Improve macros for struct feature_ops
perf: builtin-record: Document and check that mmap_pages must be a power of two.
perf: builtin-record: Provide advice if mmap'ing fails with EPERM.
perf tools: Fix truncated annotation
perf script: look up thread using tid instead of pid
perf tools: Look up thread names for system wide profiling
perf tools: Fix comm for processes with named threads
...
There are four places where new filter for a given filter string is
created, which involves several different steps. This patch factors
those steps into create_[system_]filter() functions which in turn make
use of create_filter_{start|finish}() for common parts.
The only functional change is that if replace_filter_string() is
requested and fails, creation fails without any side effect instead of
being ignored.
Note that system filter is now installed after the processing is
complete which makes freeing before and then restoring filter string
on error unncessary.
-v2: Rebased to resolve conflict with 49aa29513e and updated both
create_filter() functions to always set *filterp instead of
requiring the caller to clear it to %NULL on entry.
Link: http://lkml.kernel.org/r/1323988305-1469-2-git-send-email-tj@kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add stacktrace_filter= to the kernel command line that lets
the user pick specific functions to check the stack on.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Change set_ftrace_early_filter() to ftrace_set_early_filter()
and make it a global function. This will allow other subsystems
in the kernel to be able to enable function tracing at start
up and reuse the ftrace function parsing code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The stack_tracer is used to look at every function and check
if the current stack is bigger than the last recorded max stack size.
When a new max is found, then it saves that stack off.
Currently the stack tracer is limited by the global_ops of
the function tracer. As the stack tracer has nothing to do with
the ftrace function tracer, except that it uses it as its internal
engine, the stack tracer should have its own list.
A new file is added to the tracing debugfs directory called:
stack_trace_filter
that can be used to select which functions you want to check the stack
on.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The set_ftrace_filter shows "hashed" functions, which are functions
that are added with operations to them (like traceon and traceoff).
As other subsystems may be able to show what functions they are
using for function tracing, the hash items should no longer
be shown just because the FILTER flag is set. As they have nothing
to do with other subsystems filters.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracer is set up to allow any other subsystem (like perf)
to use it. Ftrace already has a way to list what functions are enabled
by the global_ops. It would be very helpful to let other users of
the function tracer to be able to use the same code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are two types of hashes in the ftrace_ops; one type
is the filter_hash and the other is the notrace_hash. Either
one may be null, meaning it has no elements. But when elements
are added, the hash is allocated.
Throughout the code, a check needs to be made to see if a hash
exists or the hash has elements, but the check if the hash exists
is usually missing causing the possible "NULL pointer dereference bug".
Add a helper routine called "ftrace_hash_empty()" that returns
true if the hash doesn't exist or its count is zero. As they mean
the same thing.
Last-bug-reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When disabling the "notrace" records, that means we want to trace them.
If the notrace_hash is zero, it means that we want to trace all
records. But to disable a zero notrace_hash means nothing.
The check for the notrace_hash count was incorrect with:
if (hash && !hash->count)
return
With the correct comment above it that states that we do nothing
if the notrace_hash has zero count. But !hash also means that
the notrace hash has zero count. I think this was done to
protect against dereferencing NULL. But if !hash is true, then
we go through the following loop without doing a single thing.
Fix it to:
if (!hash || !hash->count)
return;
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that each set of pages in the function list are sorted by
ip, we can use bsearch to find a record within each set of pages.
This speeds up the ftrace_location() function by magnitudes.
For archs (like x86) that need to add a breakpoint at every function
that will be converted from a nop to a callback and vice versa,
the breakpoint callback needs to know if the breakpoint was for
ftrace or not. It requires finding the breakpoint ip within the
records. Doing a linear search is extremely inefficient. It is
a must to be able to do a fast binary search to find these locations.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Sort records by ip locations of the ftrace mcount calls on each of the
set of pages in the function list. This helps in localizing cache
usuage when updating the function locations, as well as gives us
the ability to quickly find an ip location in the list.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As new functions come in to be initalized from mcount to nop,
they are done by groups of pages. Whether it is the core kernel
or a module. There's no need to keep track of these on a per record
basis.
At startup, and as any module is loaded, the functions to be
traced are stored in a group of pages and added to the function
list at the end. We just need to keep a pointer to the first
page of the list that was added, and use that to know where to
start on the list for initializing functions.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Allocate the mcount record pages as a group of pages as big
as can be allocated and waste no more than a single page.
Grouping the mcount pages as much as possible helps with cache
locality, as we do not need to redirect with descriptors as we
cross from page to page. It also allows us to do more with the
records later on (sort them with bigger benefits).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Records that are added to the function trace table are
permanently there, except for modules. By separating out the
modules to their own pages that can be freed in one shot
we can remove the "freed" flag and simplify some of the record
management.
Another benefit of doing this is that we can also move the
records around; sort them.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The stop machine method to modify all functions in the kernel
(some 20,000 of them) is the safest way to do so across all archs.
But some archs may not need this big hammer approach to modify code
on SMP machines, and can simply just update the code it needs.
Adding a weak function arch_ftrace_update_code() that now does the
stop machine, will also let any arch override this method.
If the arch needs to check the system and then decide if it can
avoid stop machine, it can still call ftrace_run_stop_machine() to
use the old method.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Multiple users of the function tracer can register their functions
with the ftrace_ops structure. The accounting within ftrace will
update the counter on each function record that is being traced.
When the ftrace_ops filtering adds or removes functions, the
function records will be updated accordingly if the ftrace_ops is
still registered.
When a ftrace_ops is removed, the counter of the function records,
that the ftrace_ops traces, are decremented. When they reach zero
the functions that they represent are modified to stop calling the
mcount code.
When changes are made, the code is updated via stop_machine() with
a command passed to the function to tell it what to do. There is an
ENABLE and DISABLE command that tells the called function to enable
or disable the functions. But the ENABLE is really a misnomer as it
should just update the records, as records that have been enabled
and now have a count of zero should be disabled.
The DISABLE command is used to disable all functions regardless of
their counter values. This is the big off switch and is not the
complement of the ENABLE command.
To make matters worse, when a ftrace_ops is unregistered and there
is another ftrace_ops registered, neither the DISABLE nor the
ENABLE command are set when calling into the stop_machine() function
and the records will not be updated to match their counter. A command
is passed to that function that will update the mcount code to call
the registered callback directly if it is the only one left. This
means that the ftrace_ops that is still registered will have its callback
called by all functions that have been set for it as well as the ftrace_ops
that was just unregistered.
Here's a way to trigger this bug. Compile the kernel with
CONFIG_FUNCTION_PROFILER set and with CONFIG_FUNCTION_GRAPH not set:
CONFIG_FUNCTION_PROFILER=y
# CONFIG_FUNCTION_GRAPH is not set
This will force the function profiler to use the function tracer instead
of the function graph tracer.
# cd /sys/kernel/debug/tracing
# echo schedule > set_ftrace_filter
# echo function > current_tracer
# cat set_ftrace_filter
schedule
# cat trace
# tracer: nop
#
# entries-in-buffer/entries-written: 692/68108025 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
kworker/0:2-909 [000] .... 531.235574: schedule <-worker_thread
<idle>-0 [001] .N.. 531.235575: schedule <-cpu_idle
kworker/0:2-909 [000] .... 531.235597: schedule <-worker_thread
sshd-2563 [001] .... 531.235647: schedule <-schedule_hrtimeout_range_clock
# echo 1 > function_profile_enabled
# echo 0 > function_porfile_enabled
# cat set_ftrace_filter
schedule
# cat trace
# tracer: function
#
# entries-in-buffer/entries-written: 159701/118821262 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
<idle>-0 [002] ...1 604.870655: local_touch_nmi <-cpu_idle
<idle>-0 [002] d..1 604.870655: enter_idle <-cpu_idle
<idle>-0 [002] d..1 604.870656: atomic_notifier_call_chain <-enter_idle
<idle>-0 [002] d..1 604.870656: __atomic_notifier_call_chain <-atomic_notifier_call_chain
The same problem could have happened with the trace_probe_ops,
but they are modified with the set_frace_filter file which does the
update at closure of the file.
The simple solution is to change ENABLE to UPDATE and call it every
time an ftrace_ops is unregistered.
Link: http://lkml.kernel.org/r/1323105776-26961-3-git-send-email-jolsa@redhat.com
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add an EXPORT_SYMBOL_GPL() so that rcutorture can dump the trace buffer
upon detection of an RCU error.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
If the set_ftrace_filter is cleared by writing just whitespace to
it, then the filter hash refcounts will be decremented but not
updated. This causes two bugs:
1) No functions will be enabled for tracing when they all should be
2) If the users clears the set_ftrace_filter twice, it will crash ftrace:
------------[ cut here ]------------
WARNING: at /home/rostedt/work/git/linux-trace.git/kernel/trace/ftrace.c:1384 __ftrace_hash_rec_update.part.27+0x157/0x1a7()
Modules linked in:
Pid: 2330, comm: bash Not tainted 3.1.0-test+ #32
Call Trace:
[<ffffffff81051828>] warn_slowpath_common+0x83/0x9b
[<ffffffff8105185a>] warn_slowpath_null+0x1a/0x1c
[<ffffffff810ba362>] __ftrace_hash_rec_update.part.27+0x157/0x1a7
[<ffffffff810ba6e8>] ? ftrace_regex_release+0xa7/0x10f
[<ffffffff8111bdfe>] ? kfree+0xe5/0x115
[<ffffffff810ba51e>] ftrace_hash_move+0x2e/0x151
[<ffffffff810ba6fb>] ftrace_regex_release+0xba/0x10f
[<ffffffff8112e49a>] fput+0xfd/0x1c2
[<ffffffff8112b54c>] filp_close+0x6d/0x78
[<ffffffff8113a92d>] sys_dup3+0x197/0x1c1
[<ffffffff8113a9a6>] sys_dup2+0x4f/0x54
[<ffffffff8150cac2>] system_call_fastpath+0x16/0x1b
---[ end trace 77a3a7ee73794a02 ]---
Link: http://lkml.kernel.org/r/20111101141420.GA4918@debian
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A forced undef of a config value was used for testing and was
accidently left in during the final commit. This causes x86 to
run slower than needed while running function tracing as well
as causes the function graph selftest to fail when DYNMAIC_FTRACE
is not set. This is because the code in MCOUNT expects the ftrace
code to be processed with the config value set that happened to
be forced not set.
The forced config option was left in by:
commit 6331c28c96
ftrace: Fix dynamic selftest failure on some archs
Link: http://lkml.kernel.org/r/20111102150255.GA6973@debian
Cc: stable@vger.kernel.org
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Though not all events have field 'prev_pid', it was allowed to do this:
# echo 'prev_pid == 100' > events/sched/filter
but commit 75b8e98263 (tracing/filter: Swap
entire filter of events) broke it without any reason.
Link: http://lkml.kernel.org/r/4EAF46CF.8040408@cn.fujitsu.com
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix a bug introduced by e9dbfae5, which prevents event_subsystem from
ever being released.
Ref_count was added to keep track of subsystem users, not for counting
events. Subsystem is created with ref_count = 1, so there is no need to
increment it for every event, we have nr_events for that. Fix this by
touching ref_count only when we actually have a new user -
subsystem_open().
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Link: http://lkml.kernel.org/r/1320052062-7846-1-git-send-email-idryomov@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_event_call->filter is sched RCU protected but didn't use
rcu_assign_pointer(). Use it.
TODO: Add proper __rcu annotation to call->filter and all its users.
-v2: Use RCU_INIT_POINTER() for %NULL clearing as suggested by Eric.
Link: http://lkml.kernel.org/r/20111123164949.GA29639@google.com
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@kernel.org # (2.6.39+)
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Knowing the number of event entries in the ring buffer compared
to the total number that were written is useful information. The
latency format gives this information and there's no reason that the
default format does not.
This information is now added to the default header, along with the
number of online CPUs:
# tracer: nop
#
# entries-in-buffer/entries-written: 159836/64690869 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
<idle>-0 [000] ...2 49.442971: local_touch_nmi <-cpu_idle
<idle>-0 [000] d..2 49.442973: enter_idle <-cpu_idle
<idle>-0 [000] d..2 49.442974: atomic_notifier_call_chain <-enter_idle
<idle>-0 [000] d..2 49.442976: __atomic_notifier_call_chain <-atomic_notifier
The above shows that the trace contains 159836 entries, but
64690869 were written. One could figure out that there were
64531033 entries that were dropped.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
People keep asking how to get the preempt count, irq, and need resched info
and we keep telling them to enable the latency format. Some developers think
that traces without this info is completely useless, and for a lot of tasks
it is useless.
The first option was to enable the latency trace as the default format, but
the header for the latency format is pretty useless for most tracers and
it also does the timestamp in straight microseconds from the time the trace
started. This is sometimes more difficult to read as the default trace is
seconds from the start of boot up.
Latency format:
# tracer: nop
#
# nop latency trace v1.1.5 on 3.2.0-rc1-test+
# --------------------------------------------------------------------
# latency: 0 us, #159771/64234230, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:4)
# -----------------
# | task: -0 (uid:0 nice:0 policy:0 rt_prio:0)
# -----------------
#
# _------=> CPU#
# / _-----=> irqs-off
# | / _----=> need-resched
# || / _---=> hardirq/softirq
# ||| / _--=> preempt-depth
# |||| / delay
# cmd pid ||||| time | caller
# \ / ||||| \ | /
migratio-6 0...2 41778231us+: rcu_note_context_switch <-__schedule
migratio-6 0...2 41778233us : trace_rcu_utilization <-rcu_note_context_switch
migratio-6 0...2 41778235us+: rcu_sched_qs <-rcu_note_context_switch
migratio-6 0d..2 41778236us+: rcu_preempt_qs <-rcu_note_context_switch
migratio-6 0...2 41778238us : trace_rcu_utilization <-rcu_note_context_switch
migratio-6 0...2 41778239us+: debug_lockdep_rcu_enabled <-__schedule
default format:
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
migration/0-6 [000] 50.025810: rcu_note_context_switch <-__schedule
migration/0-6 [000] 50.025812: trace_rcu_utilization <-rcu_note_context_switch
migration/0-6 [000] 50.025813: rcu_sched_qs <-rcu_note_context_switch
migration/0-6 [000] 50.025815: rcu_preempt_qs <-rcu_note_context_switch
migration/0-6 [000] 50.025817: trace_rcu_utilization <-rcu_note_context_switch
migration/0-6 [000] 50.025818: debug_lockdep_rcu_enabled <-__schedule
migration/0-6 [000] 50.025820: debug_lockdep_rcu_enabled <-__schedule
The latency format header has latency information that is pretty meaningless
for most tracers. Although some of the header is useful, and we can add that
later to the default format as well.
What is really useful with the latency format is the irqs-off, need-resched
hard/softirq context and the preempt count.
This commit adds the option irq-info which is on by default that adds this
information:
# tracer: nop
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
<idle>-0 [000] d..2 49.309305: cpuidle_get_driver <-cpuidle_idle_call
<idle>-0 [000] d..2 49.309307: mwait_idle <-cpu_idle
<idle>-0 [000] d..2 49.309309: need_resched <-mwait_idle
<idle>-0 [000] d..2 49.309310: test_ti_thread_flag <-need_resched
<idle>-0 [000] d..2 49.309312: trace_power_start.constprop.13 <-mwait_idle
<idle>-0 [000] d..2 49.309313: trace_cpu_idle <-mwait_idle
<idle>-0 [000] d..2 49.309315: need_resched <-mwait_idle
If a user wants the old format, they can disable the 'irq-info' option:
# tracer: nop
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
<idle>-0 [000] 49.309305: cpuidle_get_driver <-cpuidle_idle_call
<idle>-0 [000] 49.309307: mwait_idle <-cpu_idle
<idle>-0 [000] 49.309309: need_resched <-mwait_idle
<idle>-0 [000] 49.309310: test_ti_thread_flag <-need_resched
<idle>-0 [000] 49.309312: trace_power_start.constprop.13 <-mwait_idle
<idle>-0 [000] 49.309313: trace_cpu_idle <-mwait_idle
<idle>-0 [000] 49.309315: need_resched <-mwait_idle
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the set_ftrace_filter is cleared by writing just whitespace to
it, then the filter hash refcounts will be decremented but not
updated. This causes two bugs:
1) No functions will be enabled for tracing when they all should be
2) If the users clears the set_ftrace_filter twice, it will crash ftrace:
------------[ cut here ]------------
WARNING: at /home/rostedt/work/git/linux-trace.git/kernel/trace/ftrace.c:1384 __ftrace_hash_rec_update.part.27+0x157/0x1a7()
Modules linked in:
Pid: 2330, comm: bash Not tainted 3.1.0-test+ #32
Call Trace:
[<ffffffff81051828>] warn_slowpath_common+0x83/0x9b
[<ffffffff8105185a>] warn_slowpath_null+0x1a/0x1c
[<ffffffff810ba362>] __ftrace_hash_rec_update.part.27+0x157/0x1a7
[<ffffffff810ba6e8>] ? ftrace_regex_release+0xa7/0x10f
[<ffffffff8111bdfe>] ? kfree+0xe5/0x115
[<ffffffff810ba51e>] ftrace_hash_move+0x2e/0x151
[<ffffffff810ba6fb>] ftrace_regex_release+0xba/0x10f
[<ffffffff8112e49a>] fput+0xfd/0x1c2
[<ffffffff8112b54c>] filp_close+0x6d/0x78
[<ffffffff8113a92d>] sys_dup3+0x197/0x1c1
[<ffffffff8113a9a6>] sys_dup2+0x4f/0x54
[<ffffffff8150cac2>] system_call_fastpath+0x16/0x1b
---[ end trace 77a3a7ee73794a02 ]---
Link: http://lkml.kernel.org/r/20111101141420.GA4918@debian
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A forced undef of a config value was used for testing and was
accidently left in during the final commit. This causes x86 to
run slower than needed while running function tracing as well
as causes the function graph selftest to fail when DYNMAIC_FTRACE
is not set. This is because the code in MCOUNT expects the ftrace
code to be processed with the config value set that happened to
be forced not set.
The forced config option was left in by:
commit 6331c28c96
ftrace: Fix dynamic selftest failure on some archs
Link: http://lkml.kernel.org/r/20111102150255.GA6973@debian
Cc: stable@vger.kernel.org
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The system filter can be used to set multiple event filters that
exist within the system. But currently it displays the last filter
written that does not necessarily correspond to the filters within
the system. The system filter itself is not used to filter any events.
The system filter is just a means to set filters of the events within
it.
Because this causes an ambiguous state when the system filter reads
a filter string but the events within the system have different strings
it is best to just show a boiler plate:
### global filter ###
# Use this to set filters for multiple events.
# Only events with the given fields will be affected.
# If no events are modified, an error message will be displayed here.
If an error occurs while writing to the system filter, the system
filter will replace the boiler plate with the error message as it
currently does.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Though not all events have field 'prev_pid', it was allowed to do this:
# echo 'prev_pid == 100' > events/sched/filter
but commit 75b8e98263 (tracing/filter: Swap
entire filter of events) broke it without any reason.
Link: http://lkml.kernel.org/r/4EAF46CF.8040408@cn.fujitsu.com
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
These files were getting <linux/module.h> via an implicit non-obvious
path, but we want to crush those out of existence since they cost
time during compiles of processing thousands of lines of headers
for no reason. Give them the lightweight header that just contains
the EXPORT_SYMBOL infrastructure.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Fix a bug introduced by e9dbfae5, which prevents event_subsystem from
ever being released.
Ref_count was added to keep track of subsystem users, not for counting
events. Subsystem is created with ref_count = 1, so there is no need to
increment it for every event, we have nr_events for that. Fix this by
touching ref_count only when we actually have a new user -
subsystem_open().
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Link: http://lkml.kernel.org/r/1320052062-7846-1-git-send-email-idryomov@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
These files are doing things like module_put and try_module_get
so they need to call out the module.h for explicit inclusion,
rather than getting it via <linux/device.h> which we ideally want
to remove the module.h inclusion from.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits)
perf symbols: Increase symbol KSYM_NAME_LEN size
perf hists browser: Refuse 'a' hotkey on non symbolic views
perf ui browser: Use libslang to read keys
perf tools: Fix tracing info recording
perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads
perf hists: Don't consider filtered entries when calculating column widths
perf hists: Don't decay total_period for filtered entries
perf hists browser: Honour symbol_conf.show_{nr_samples,total_period}
perf hists browser: Do not exit on tab key with single event
perf annotate browser: Don't change selection line when returning from callq
perf tools: handle endianness of feature bitmap
perf tools: Add prelink suggestion to dso update message
perf script: Fix unknown feature comment
perf hists browser: Apply the dso and thread filters when merging new batches
perf hists: Move the dso and thread filters from hist_browser
perf ui browser: Honour the xterm colors
perf top tui: Give color hints just on the percentage, like on --stdio
perf ui browser: Make the colors configurable and change the defaults
perf tui: Remove unneeded call to newtCls on startup
perf hists: Don't format the percentage on hist_entry__snprintf
...
Fix up conflicts in arch/x86/kernel/kprobes.c manually.
Ingo's tree did the insane "add volatile to const array", which just
doesn't make sense ("volatile const"?). But we could remove the const
*and* make the array volatile to make doubly sure that gcc doesn't
optimize it away..
Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the
reader_lock has been turned into a raw lock by the core locking merge,
and there was a new user of it introduced in this perf core merge. Make
sure that new use also uses the raw accessor functions.
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
rtmutex: Add missing rcu_read_unlock() in debug_rt_mutex_print_deadlock()
lockdep: Comment all warnings
lib: atomic64: Change the type of local lock to raw_spinlock_t
locking, lib/atomic64: Annotate atomic64_lock::lock as raw
locking, x86, iommu: Annotate qi->q_lock as raw
locking, x86, iommu: Annotate irq_2_ir_lock as raw
locking, x86, iommu: Annotate iommu->register_lock as raw
locking, dma, ipu: Annotate bank_lock as raw
locking, ARM: Annotate low level hw locks as raw
locking, drivers/dca: Annotate dca_lock as raw
locking, powerpc: Annotate uic->lock as raw
locking, x86: mce: Annotate cmci_discover_lock as raw
locking, ACPI: Annotate c3_lock as raw
locking, oprofile: Annotate oprofilefs lock as raw
locking, video: Annotate vga console lock as raw
locking, latencytop: Annotate latency_lock as raw
locking, timer_stats: Annotate table_lock as raw
locking, rwsem: Annotate inner lock as raw
locking, semaphores: Annotate inner lock as raw
locking, sched: Annotate thread_group_cputimer as raw
...
Fix up conflicts in kernel/posix-cpu-timers.c manually: making
cputimer->cputime a raw lock conflicted with the ABBA fix in commit
bcd5cff721 ("cputimer: Cure lock inversion").
The trace_pipe_raw handler holds a cached page from the time the file
is opened to the time it is closed. The cached page is used to handle
the case of the user space buffer being smaller than what was read from
the ring buffer. The left over buffer is held in the cache so that the
next read will continue where the data left off.
After EOF is returned (no more data in the buffer), the index of
the cached page is set to zero. If a user app reads the page again
after EOF, the check in the buffer will see that the cached page
is less than page size and will return the cached page again. This
will cause reading the trace_pipe_raw again after EOF to return
duplicate data, making the output look like the time went backwards
but instead data is just repeated.
The fix is to not reset the index right after all data is read
from the cache, but to reset it after all data is read and more
data exists in the ring buffer.
Cc: stable <stable@kernel.org>
Reported-by: Jeremy Eder <jeder@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
tracing_enabled option is deprecated.
To start/stop tracing, write to /sys/kernel/debug/tracing/tracing_on
without tracing_enabled. This patch is based on Linux 3.1.0-rc1
Signed-off-by: Geunsik Lim <geunsik.lim@samsung.com>
Link: http://lkml.kernel.org/r/1313127022-23830-1-git-send-email-leemgs1@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When doing intense tracing, the kmalloc inside trace_marker can
introduce side effects to what is being traced.
As trace_marker() is used by userspace to inject data into the
kernel ring buffer, it needs to do so with the least amount
of intrusion to the operations of the kernel or the user space
application.
As the ring buffer is designed to write directly into the buffer
without the need to make a temporary buffer, and userspace already
went through the hassle of knowing how big the write will be,
we can simply pin the userspace pages and write the data directly
into the buffer. This improves the impact of tracing via trace_marker
tremendously!
Thanks to Peter Zijlstra and Thomas Gleixner for pointing out the
use of get_user_pages_fast() and kmap_atomic().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As the function tracer is very intrusive, lots of self checks are
performed on the tracer and if something is found to be strange
it will shut itself down keeping it from corrupting the rest of the
kernel. This shutdown may still allow functions to be traced, as the
tracing only stops new modifications from happening. Trying to stop
the function tracer itself can cause more harm as it requires code
modification.
Although a WARN_ON() is executed, a user may not notice it. To help
the user see that something isn't right with the tracing of the system
a big warning is added to the output of the tracer that lets the user
know that their data may be incomplete.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix kprobe-tracer not to delete a probe if the probe is in use.
In that case, delete operation will return -EBUSY.
This bug can cause a kernel panic if enabled probes are deleted
during perf record.
(Add some probes on functions)
sh-4.2# perf probe --del probe:\*
sh-4.2# exit
(kernel panic)
This is originally reported on the fedora bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=742383
I've also checked that this problem doesn't happen on
tracepoints when module removing because perf event
locks target module.
$ sudo ./perf record -e xfs:\* -aR sh
sh-4.2# rmmod xfs
ERROR: Module xfs is in use
sh-4.2# exit
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.203 MB perf.data (~8862 samples) ]
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/20111004104438.14591.6553.stgit@fedora15
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* pm-runtime:
PM / Tracing: build rpm-traces.c only if CONFIG_PM_RUNTIME is set
PM / Runtime: Replace dev_dbg() with trace_rpm_*()
PM / Runtime: Introduce trace points for tracing rpm_* functions
PM / Runtime: Don't run callbacks under lock for power.irq_safe set
USB: Add wakeup info to debugging messages
PM / Runtime: pm_runtime_idle() can be called in atomic context
PM / Runtime: Add macro to test for runtime PM events
PM / Runtime: Add might_sleep() to runtime PM functions
Do not build kernel/trace/rpm-traces.c if CONFIG_PM_RUNTIME is not
set, which avoids a build failure.
[rjw: Added the changelog and modified the subject slightly.]
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This patch introduces 3 trace points to prepare for tracing
rpm_idle/rpm_suspend/rpm_resume functions, so we can use these
trace points to replace the current dev_dbg().
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
If irqs are disabled when preemption count reaches zero, the
preemptirqsoff tracer should not flag that as the end.
When interrupts are enabled and preemption count is not zero
the preemptirqsoff correctly continues its tracing.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When debugging tight race conditions, it can be helpful to have a
synchronized tracing method. Although in most cases the global clock
provides this functionality, if timings is not the issue, it is more
comforting to know that the order of events really happened in a precise
order.
Instead of using a clock, add a "counter" that is simply an incrementing
atomic 64bit counter that orders the events as they are perceived to
happen.
The trace_clock_counter() is added from the attempt by Peter Zijlstra
trying to convert the trace_clock_global() to it. I took Peter's counter
code and made trace_clock_counter() instead, and added it to the choice
of clocks. Just echo counter > /debug/tracing/trace_clock to activate
it.
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Requested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing locks can be taken in atomic context and therefore
cannot be preempted on -rt - annotate it.
In mainline this change documents the low level nature of
the lock - otherwise there's no functional difference. Lockdep
and Sparse checking will work as usual.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The stats file under per_cpu folder provides the number of entries,
overruns and other statistics about the CPU ring buffer. However, the
numbers do not provide any indication of how full the ring buffer is in
bytes compared to the overall size in bytes. Also, it is helpful to know
the rate at which the cpu buffer is filling up.
This patch adds an entry "bytes: " in printed stats for per_cpu ring
buffer which provides the actual bytes consumed in the ring buffer. This
field includes the number of bytes used by recorded events and the
padding bytes added when moving the tail pointer to next page.
It also adds the following time stamps:
"oldest event ts:" - the oldest timestamp in the ring buffer
"now ts:" - the timestamp at the time of reading
The field "now ts" provides a consistent time snapshot to the userspace
when being read. This is read from the same trace clock used by tracing
event timestamps.
Together, these values provide the rate at which the buffer is filling
up, from the formula:
bytes / (now_ts - oldest_event_ts)
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The current file "buffer_size_kb" reports the size of per-cpu buffer and
not the overall memory allocated which could be misleading. A new file
"buffer_total_size_kb" adds up all the enabled CPU buffer sizes and
reports it. This is only a readonly entry.
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Link: http://lkml.kernel.org/r/1313531179-9323-2-git-send-email-vnagarnaik@google.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The self testing for event filters does not really need preemption
disabled as there are no races at the time of testing, but the functions
it calls uses rcu_dereference_sched() which will complain if preemption
is not disabled.
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding automated tests running as late_initcall. Tests are
compiled in with CONFIG_FTRACE_STARTUP_TEST option.
Adding test event "ftrace_test_filter" used to simulate
filter processing during event occurance.
String filters are compiled and tested against several
test events with different values.
Also testing that evaluation of explicit predicates is ommited
due to the lazy filter evaluation.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1313072754-4620-11-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Adding walk_pred_tree function to be used for walking throught
the filter predicates.
For each predicate the callback function is called, allowing
users to add their own functionality or customize their way
through the filter predicates.
Changing check_pred_tree function to use walk_pred_tree.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1313072754-4620-6-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We dont need to perform lookup through the ftrace_events list,
instead we can use the 'tp_event' field.
Each perf_event contains tracepoint event field 'tp_event', which
got initialized during the tracepoint event initialization.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1313072754-4620-5-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The field_name was used just for finding event's fields. This way we
don't need to care about field_name allocation/free.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1313072754-4620-4-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Making the code cleaner by having one function to fully prepare
the predicate (create_pred), and another to add the predicate to
the filter (filter_add_pred).
As a benefit, this way the dry_run flag stays only inside the
replace_preds function and is not passed deeper.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1313072754-4620-3-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Don't dynamically allocate filter_pred struct, use static memory.
This way we can get rid of the code managing the dynamic filter_pred
struct object.
The create_pred function integrates create_logical_pred function.
This way the static predicate memory is returned only from
one place.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1313072754-4620-2-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'for-linus' of git://git.kernel.dk/linux-block: (23 commits)
Revert "cfq: Remove special treatment for metadata rqs."
block: fix flush machinery for stacking drivers with differring flush flags
block: improve rq_affinity placement
blktrace: add FLUSH/FUA support
Move some REQ flags to the common bio/request area
allow blk_flush_policy to return REQ_FSEQ_DATA independent of *FLUSH
xen/blkback: Make description more obvious.
cfq-iosched: Add documentation about idling
block: Make rq_affinity = 1 work as expected
block: swim3: fix unterminated of_device_id table
block/genhd.c: remove useless cast in diskstats_show()
drivers/cdrom/cdrom.c: relax check on dvd manufacturer value
drivers/block/drbd/drbd_nl.c: use bitmap_parse instead of __bitmap_parse
bsg-lib: add module.h include
cfq-iosched: Reduce linked group count upon group destruction
blk-throttle: correctly determine sync bio
loop: fix deadlock when sysfs and LOOP_CLR_FD race against each other
loop: add BLK_DEV_LOOP_MIN_COUNT=%i to allow distros 0 pre-allocated loop devices
loop: add management interface for on-demand device allocation
loop: replace linked list of allocated devices with an idr index
...
Add FLUSH/FUA support to blktrace. As FLUSH precedes WRITE and/or
FUA follows WRITE, use the same 'F' flag for both cases and
distinguish them by their (relative) position. The end results
look like (other flags might be shown also):
- WRITE: W
- WRITE_FLUSH: FW
- WRITE_FUA: WF
- WRITE_FLUSH_FUA: FWF
Note that we reuse TC_BARRIER due to lack of bit space of act_mask
so that the older versions of blktrace tools will report flush
requests as barriers from now on.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
gcc incorrectly states that the variable "fmt" is uninitialized when
CC_OPITMIZE_FOR_SIZE is set.
Instead of just blindly setting fmt to NULL, the code is cleaned up
a little to be a bit easier for humans to follow, as well as gcc
to know the variables are initialized.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>
Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
What was scheduled to be 2.6.41 is now going to be 3.1 .
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1107250929370.8080@swampdragon.chaosbits.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since the address of a module-local variable can only be
solved after the target module is loaded, the symbol
fetch-argument should be updated when loading target
module.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20110627072703.6528.75042.stgit@fedora15
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
To support probing module init functions, kprobe-tracer allows
user to define a probe on non-existed function when it is given
with a module name. This also enables user to set a probe on
a function on a specific module, even if a same name (but different)
function is locally defined in another module.
The module name must be in the front of function name and separated
by a ':'. e.g. btrfs:btrfs_init_sysfs
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20110627072656.6528.89970.stgit@fedora15
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Enabling function tracer to trace all functions, then load a module and
then disable function tracing will cause ftrace to fail.
This can also happen by enabling function tracing on the command line:
ftrace=function
and during boot up, modules are loaded, then you disable function tracing
with 'echo nop > current_tracer' you will trigger a bug in ftrace that
will shut itself down.
The reason is, the new ftrace code keeps ref counts of all ftrace_ops that
are registered for tracing. When one or more ftrace_ops are registered,
all the records that represent the functions that the ftrace_ops will
trace have a ref count incremented. If this ref count is not zero,
when the code modification runs, that function will be enabled for tracing.
If the ref count is zero, that function will be disabled from tracing.
To make sure the accounting was working, FTRACE_WARN_ON()s were added
to updating of the ref counts.
If the ref count hits its max (> 2^30 ftrace_ops added), or if
the ref count goes below zero, a FTRACE_WARN_ON() is triggered which
disables all modification of code.
Since it is common for ftrace_ops to trace all functions in the kernel,
instead of creating > 20,000 hash items for the ftrace_ops, the hash
count is just set to zero, and it represents that the ftrace_ops is
to trace all functions. This is where the issues arrise.
If you enable function tracing to trace all functions, and then add
a module, the modules function records do not get the ref count updated.
When the function tracer is disabled, all function records ref counts
are subtracted. Since the modules never had their ref counts incremented,
they go below zero and the FTRACE_WARN_ON() is triggered.
The solution to this is rather simple. When modules are loaded, and
their functions are added to the the ftrace pool, look to see if any
ftrace_ops are registered that trace all functions. And for those,
update the ref count for the module function records.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Rename probe_* to trace_probe_* for avoiding namespace
confliction. This also fixes improper names of find_probe_event()
and cleanup_all_probes() to find_trace_probe() and
release_all_trace_probes() respectively.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20110627072636.6528.60374.stgit@fedora15
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the stack trace per event in ftace is only 8 frames.
This can be quite limiting and sometimes useless. Especially when
the "ignore frames" is wrong and we also use up stack frames for
the event processing itself.
Change this to be dynamic by adding a percpu buffer that we can
write a large stack frame into and then copy into the ring buffer.
For interrupts and NMIs that come in while another event is being
process, will only get to use the 8 frame stack. That should be enough
as the task that it interrupted will have the full stack frame anyway.
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Archs that do not implement CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST, will
fail the dynamic ftrace selftest.
The function tracer has a quick 'off' variable that will prevent
the call back functions from being called. This variable is called
function_trace_stop. In x86, this is implemented directly in the mcount
assembly, but for other archs, an intermediate function is used called
ftrace_test_stop_func().
In dynamic ftrace, the function pointer variable ftrace_trace_function is
used to update the caller code in the mcount caller. But for archs that
do not have CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST set, it only calls
ftrace_test_stop_func() instead, which in turn calls __ftrace_trace_function.
When more than one ftrace_ops is registered, the function it calls is
ftrace_ops_list_func(), which will iterate over all registered ftrace_ops
and call the callbacks that have their hash matching.
The issue happens when two ftrace_ops are registered for different functions
and one is then unregistered. The __ftrace_trace_function is then pointed
to the remaining ftrace_ops callback function directly. This mean it will
be called for all functions that were registered to trace by both ftrace_ops
that were registered.
This is not an issue for archs with CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST,
because the update of ftrace_trace_function doesn't happen until after all
functions have been updated, and then the mcount caller is updated. But
for those archs that do use the ftrace_test_stop_func(), the update is
immediate.
The dynamic selftest fails because it hits this situation, and the
ftrace_ops that it registers fails to only trace what it was suppose to
and instead traces all other functions.
The solution is to delay the setting of __ftrace_trace_function until
after all the functions have been updated according to the registered
ftrace_ops. Also, function_trace_stop is set during the update to prevent
function tracing from calling code that is caused by the function tracer
itself.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, if set_ftrace_filter() is called when the ftrace_ops is
active, the function filters will not be updated. They will only be updated
when tracing is disabled and re-enabled.
Update the functions immediately during set_ftrace_filter().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Whenever the hash of the ftrace_ops is updated, the record counts
must be balance. This requires disabling the records that are set
in the original hash, and then enabling the records that are set
in the updated hash.
Moving the update into ftrace_hash_move() removes the bug where the
hash was updated but the records were not, which results in ftrace
triggering a warning and disabling itself because the ftrace_ops filter
is updated while the ftrace_ops was registered, and then the failure
happens when the ftrace_ops is unregistered.
The current code will not trigger this bug, but new code will.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When I mounted an NFS directory, it caused several modules to be loaded. At the
time I was running the preemptirqsoff tracer, and it showed the following
output:
# tracer: preemptirqsoff
#
# preemptirqsoff latency trace v1.1.5 on 2.6.33.9-rt30-mrg-test
# --------------------------------------------------------------------
# latency: 1177 us, #4/4, CPU#3 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:4)
# -----------------
# | task: modprobe-19370 (uid:0 nice:0 policy:0 rt_prio:0)
# -----------------
# => started at: ftrace_module_notify
# => ended at: ftrace_module_notify
#
#
# _------=> CPU#
# / _-----=> irqs-off
# | / _----=> need-resched
# || / _---=> hardirq/softirq
# ||| / _--=> preempt-depth
# |||| /_--=> lock-depth
# |||||/ delay
# cmd pid |||||| time | caller
# \ / |||||| \ | /
modprobe-19370 3d.... 0us!: ftrace_process_locs <-ftrace_module_notify
modprobe-19370 3d.... 1176us : ftrace_process_locs <-ftrace_module_notify
modprobe-19370 3d.... 1178us : trace_hardirqs_on <-ftrace_module_notify
modprobe-19370 3d.... 1178us : <stack trace>
=> ftrace_process_locs
=> ftrace_module_notify
=> notifier_call_chain
=> __blocking_notifier_call_chain
=> blocking_notifier_call_chain
=> sys_init_module
=> system_call_fastpath
That's over 1ms that interrupts are disabled on a Real-Time kernel!
Looking at the cause (being the ftrace author helped), I found that the
interrupts are disabled before the code modification of mcounts into nops. The
interrupts only need to be disabled on start up around this code, not when
modules are being loaded.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If a function is set to be traced by the set_graph_function, but the
option funcgraph-irqs is zero, and the traced function happens to be
called from a interrupt, it will not be traced.
The point of funcgraph-irqs is to not trace interrupts when we are
preempted by an irq, not to not trace functions we want to trace that
happen to be *in* a irq.
Luckily the current->trace_recursion element is perfect to add a flag
to help us be able to trace functions within an interrupt even when
we are not tracing interrupts that preempt the trace.
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The "enable" file for the event system can be removed when a module
is unloaded and the event system only has events from that module.
As the event system nr_events count goes to zero, it may be freed
if its ref_count is also set to zero.
Like the "filter" file, the "enable" file may be opened by a task and
referenced later, after a module has been unloaded and the events for
that event system have been removed.
Although the "filter" file referenced the event system structure,
the "enable" file only references a pointer to the event system
name. Since the name is freed when the event system is removed,
it is possible that an access to the "enable" file may reference
a freed pointer.
Update the "enable" file to use the subsystem_open() routine that
the "filter" file uses, to keep a reference to the event system
structure while the "enable" file is opened.
Cc: <stable@kernel.org>
Reported-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The event system is freed when its nr_events is set to zero. This happens
when a module created an event system and then later the module is
removed. Modules may share systems, so the system is allocated when
it is created and freed when the modules are unloaded and all the
events under the system are removed (nr_events set to zero).
The problem arises when a task opened the "filter" file for the
system. If the module is unloaded and it removed the last event for
that system, the system structure is freed. If the task that opened
the filter file accesses the "filter" file after the system has
been freed, the system will access an invalid pointer.
By adding a ref_count, and using it to keep track of what
is using the event system, we can free it after all users
are finished with the event system.
Cc: <stable@kernel.org>
Reported-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix to support kernel stack trace correctly on kprobe-tracer.
Since the execution path of kprobe-based dynamic events is different
from other tracepoint-based events, normal ftrace_trace_stack() doesn't
work correctly. To fix that, this introduces ftrace_trace_stack_regs()
which traces stack via pt_regs instead of current stack register.
e.g.
# echo p schedule+4 > /sys/kernel/debug/tracing/kprobe_events
# echo 1 > /sys/kernel/debug/tracing/options/stacktrace
# echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable
# head -n 20 /sys/kernel/debug/tracing/trace
bash-2968 [000] 10297.050245: p_schedule_4: (schedule+0x4/0x4ca)
bash-2968 [000] 10297.050247: <stack trace>
=> schedule_timeout
=> n_tty_read
=> tty_read
=> vfs_read
=> sys_read
=> system_call_fastpath
kworker/0:1-2940 [000] 10297.050265: p_schedule_4: (schedule+0x4/0x4ca)
kworker/0:1-2940 [000] 10297.050266: <stack trace>
=> worker_thread
=> kthread
=> kernel_thread_helper
sshd-1132 [000] 10297.050365: p_schedule_4: (schedule+0x4/0x4ca)
sshd-1132 [000] 10297.050365: <stack trace>
=> sysret_careful
Note: Even with this fix, the first entry will be skipped
if the probe is put on the function entry area before
the frame pointer is set up (usually, that is 4 bytes
(push %bp; mov %sp %bp) on x86), because stack unwinder
depends on the frame pointer.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/20110608070934.17777.17116.stgit@fedora15
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing ring buffer is allocated from kernel memory. While
allocating a large chunk of memory, OOM might happen which destabilizes
the system. Thus random processes might get killed during the
allocation.
This patch adds __GFP_NORETRY flag to the ring buffer allocation calls
to make it fail more gracefully if the system will not be able to
complete the allocation request.
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Link: http://lkml.kernel.org/r/1307491302-9236-1-git-send-email-vnagarnaik@google.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch replaces the code for getting an unsigned long from a
userspace buffer by a simple call to kstroul_from_user.
This makes it easier to read and less error prone.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Link: http://lkml.kernel.org/r/1307476707-14762-1-git-send-email-peterhuewe@gmx.de
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function_graph tracer does not follow global context-info option.
Adding TRACE_ITER_CONTEXT_INFO trace_flags check to enable it.
With following commands:
# echo function_graph > ./current_tracer
# echo 0 > options/context-info
# cat trace
This is what it looked like before:
# tracer: function_graph
#
# TIME CPU DURATION FUNCTION CALLS
# | | | | | | | |
1) 0.079 us | } /* __vma_link_rb */
1) 0.056 us | copy_page_range();
1) | security_vm_enough_memory() {
...
This is what it looks like now:
# tracer: function_graph
#
} /* update_ts_time_stats */
timekeeping_max_deferment();
...
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1307113131-10045-6-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The header display of function tracer does not follow
the context-info option, so field names are displayed even
if this option is off.
Added check for TRACE_ITER_CONTEXT_INFO trace_flags.
With following commands:
# echo function > ./current_tracer
# echo 0 > options/context-info
# cat trace
This is what it looked like before:
# tracer: function
#
# TASK-PID CPU# TIMESTAMP FUNCTION
# | | | | |
add_preempt_count <-schedule
rcu_note_context_switch <-schedule
...
This is what it looks like now:
# tracer: function
#
_raw_spin_unlock_irqrestore <-hrtimer_try_to_cancel
...
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1307113131-10045-4-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Functions print_graph_overhead() and print_graph_duration() displays
data for one field - DURATION.
I merged them into single function print_graph_duration(),
and added a way to display the empty parts of the field.
This way the print_graph_irq() function can use this column to display
the IRQ signs if needed and the DURATION field details stays inside
the print_graph_duration() function.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1307113131-10045-3-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The display of absolute time and duration fields is based on the
latency field. This was added during the irqsoff/wakeup tracers
graph support changes.
It's causing confusion in what fields will be displayed for the
function_graph tracer itself. So I'm removing this depency, and
adding absolute time and duration fields to the preemptirqsoff
preemptoff irqsoff wakeup tracers.
With following commands:
# echo function_graph > ./current_tracer
# cat trace
This is what it looked like before:
# tracer: function_graph
#
# TIME CPU DURATION FUNCTION CALLS
# | | | | | | | |
0) 0.068 us | } /* page_add_file_rmap */
0) | _raw_spin_unlock() {
...
This is what it looks like now:
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
0) 0.068 us | } /* add_preempt_count */
0) 0.993 us | } /* vfsmount_lock_local_lock */
...
For preemptirqsoff preemptoff irqsoff wakeup tracers,
this is what it looked like before:
SNIP
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / _-=> lock-depth
# |||| /
# CPU TASK/PID ||||| DURATION FUNCTION CALLS
# | | | ||||| | | | | | |
1) <idle>-0 | d..1 0.000 us | acpi_idle_enter_simple();
...
This is what it looks like now:
SNIP
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| /
# TIME CPU TASK/PID |||| DURATION FUNCTION CALLS
# | | | | |||| | | | | | |
19.847735 | 1) <idle>-0 | d..1 0.000 us | acpi_idle_enter_simple();
...
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1307113131-10045-2-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a trace option to disable tracing on free. When this option is
set, a write into the free_buffer file will not only shrink the
ring buffer down to zero, but it will also disable tracing.
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The proc file entry buffer_size_kb is used to set the size of tracing
buffer. The memory to expand the buffer size is kernel memory. Consider
a use case where tracing is handled by a user space utility, which acts
as a gate keeper for tracing requests. In an OOM condition, tracing is
considered a low priority task and if the utility gets killed the ring
buffer memory cannot be released back to the kernel.
This patch adds a proc file called "free_buffer" whose purpose is to
stop tracing and free up the ring buffer when it is closed.
The user space process can then set the desired size in buffer_size_kb
file and open the fd to the "free_buffer" file. Under OOM condition, if
the process gets killed, the kernel closes the file descriptor. The
release handler stops the tracing and releases the kernel memory
automatically.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Link: http://lkml.kernel.org/r/1308012717-11148-1-git-send-email-vnagarnaik@google.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing ring buffer is a group of per-cpu ring buffers where
allocation and logging is done on a per-cpu basis. The events that are
generated on a particular CPU are logged in the corresponding buffer.
This is to provide wait-free writes between CPUs and good NUMA node
locality while accessing the ring buffer.
However, the allocation routines consider NUMA locality only for buffer
page metadata and not for the actual buffer page. This causes the pages
to be allocated on the NUMA node local to the CPU where the allocation
routine is running at the time.
This patch fixes the problem by using a NUMA node specific allocation
routine so that the pages are allocated from a NUMA node local to the
logging CPU.
I tested with the getuid_microbench from autotest. It is a simple binary
that calls getuid() in a loop and measures the average time for the
syscall to complete. The following command was used to test:
$ getuid_microbench 1000000
Compared the numbers found on kernel with and without this patch and
found that logging latency decreases by 30-50 ns/call.
tracing with non-NUMA allocation - 569 ns/call
tracing with NUMA allocation - 512 ns/call
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Link: http://lkml.kernel.org/r/1304470602-20366-1-git-send-email-vnagarnaik@google.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In using syscall tracing by concurrent processes, the wakeup() that is
called in the event commit function causes contention on the spin lock
of the waitqueue. I enabled sys_enter_getuid and sys_exit_getuid
tracepoints, and by running getuid_microbench from autotest in parallel
I found that the contention causes exponential latency increase in the
tracing path.
The autotest binary getuid_microbench calls getuid() in a tight loop for
the given number of iterations and measures the average time required to
complete a single invocation of syscall.
The patch schedules a delayed work after 2 ms once an event commit calls
to wake up the trace wait_queue. This removes the delay caused by
contention on spin lock in wakeup() and amortizes the wakeup() calls
scheduled over the 2 ms period.
In the following example, the script enables the sys_enter_getuid and
sys_exit_getuid tracepoints and runs the getuid_microbench in parallel
with the given number of processes. The output clearly shows the latency
increase caused by contentions.
$ ~/getuid.sh 1
1000000 calls in 0.720974253 s (720.974253 ns/call)
$ ~/getuid.sh 2
1000000 calls in 1.166457554 s (1166.457554 ns/call)
1000000 calls in 1.168933765 s (1168.933765 ns/call)
$ ~/getuid.sh 3
1000000 calls in 1.783827516 s (1783.827516 ns/call)
1000000 calls in 1.795553270 s (1795.553270 ns/call)
1000000 calls in 1.796493376 s (1796.493376 ns/call)
$ ~/getuid.sh 4
1000000 calls in 4.483041796 s (4483.041796 ns/call)
1000000 calls in 4.484165388 s (4484.165388 ns/call)
1000000 calls in 4.484850762 s (4484.850762 ns/call)
1000000 calls in 4.485643576 s (4485.643576 ns/call)
$ ~/getuid.sh 5
1000000 calls in 6.497521653 s (6497.521653 ns/call)
1000000 calls in 6.502000236 s (6502.000236 ns/call)
1000000 calls in 6.501709115 s (6501.709115 ns/call)
1000000 calls in 6.502124100 s (6502.124100 ns/call)
1000000 calls in 6.502936358 s (6502.936358 ns/call)
After the patch, the latencies scale better.
1000000 calls in 0.728720455 s (728.720455 ns/call)
1000000 calls in 0.842782857 s (842.782857 ns/call)
1000000 calls in 0.883803135 s (883.803135 ns/call)
1000000 calls in 0.902077764 s (902.077764 ns/call)
1000000 calls in 0.902838202 s (902.838202 ns/call)
1000000 calls in 0.908896885 s (908.896885 ns/call)
1000000 calls in 0.932523515 s (932.523515 ns/call)
1000000 calls in 0.958009672 s (958.009672 ns/call)
1000000 calls in 0.986188020 s (986.188020 ns/call)
1000000 calls in 0.989771102 s (989.771102 ns/call)
1000000 calls in 0.933518391 s (933.518391 ns/call)
1000000 calls in 0.958897947 s (958.897947 ns/call)
1000000 calls in 1.031038897 s (1031.038897 ns/call)
1000000 calls in 1.089516025 s (1089.516025 ns/call)
1000000 calls in 1.141998347 s (1141.998347 ns/call)
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1305059241-7629-1-git-send-email-vnagarnaik@google.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The fix to fix the printk_formats of modules broke the
printk_formats of trace_printks in the kernel.
The update of what to show via the seq_file was only updated
if the passed in fmt was NULL, which happens only on the first
iteration. The result was showing the first format every time
instead of iterating through the available formats.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Revert the commit that removed the disabling of interrupts around
the initial modifying of mcount callers to nops, and update the comment.
The original comment was outdated and stated that the interrupts were
being disabled to prevent kstop machine, which was required with the
old ftrace daemon, but was no longer the case.
What the comment failed to mention was that interrupts needed to be
disabled to keep interrupts from preempting the modifying of the code
and then executing the code that was partially modified.
Revert the commit and update the comment.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With gcc 4.6, the self test kprobe function:
kprobe_trace_selftest_target()
is optimized such that kallsyms does not list it. The kprobes
test uses this function to insert a probe and test it. But
it will fail the test if the function is not listed in kallsyms.
Adding a __used annotation keeps the symbol in the kallsyms table.
Suggested-by: David Daney <ddaney@caviumnetworks.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
kernel/trace/ftrace.c: In function 'ftrace_regex_write.clone.15':
kernel/trace/ftrace.c:2743:6: warning: 'ret' may be used uninitialized in this
function
Signed-off-by: GuoWen Li <guowen.li.linux@gmail.com>
Link: http://lkml.kernel.org/r/201106011918.47939.guowen.li.linux@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Witold reported a reboot caused by the selftests of the dynamic function
tracer. He sent me a config and I used ktest to do a config_bisect on it
(as my config did not cause the crash). It pointed out that the problem
config was CONFIG_PROVE_RCU.
What happened was that if multiple callbacks are attached to the
function tracer, we iterate a list of callbacks. Because the list is
managed by synchronize_sched() and preempt_disable, the access to the
pointers uses rcu_dereference_raw().
When PROVE_RCU is enabled, the rcu_dereference_raw() calls some
debugging functions, which happen to be traced. The tracing of the debug
function would then call rcu_dereference_raw() which would then call the
debug function and then... well you get the idea.
I first wrote two different patches to solve this bug.
1) add a __rcu_dereference_raw() that would not do any checks.
2) add notrace to the offending debug functions.
Both of these patches worked.
Talking with Paul McKenney on IRC, he suggested to add recursion
detection instead. This seemed to be a better solution, so I decided to
implement it. As the task_struct already has a trace_recursion to detect
recursion in the ring buffer, and that has a very small number it
allows, I decided to use that same variable to add flags that can detect
the recursion inside the infrastructure of the function tracer.
I plan to change it so that the task struct bit can be checked in
mcount, but as that requires changes to all archs, I will hold that off
to the next merge window.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1306348063.1465.116.camel@gandalf.stny.rr.com
Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Filesystem, like Btrfs, has some "ULL" macros, and when these macros are passed
to tracepoints'__print_symbolic(), there will be 64->32 truncate WARNINGS during
compiling on 32bit box.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/4DACE6E0.7000507@cn.fujitsu.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When dynamic ftrace is not configured, the ops->flags still needs
to have its FTRACE_OPS_FL_ENABLED bit set in ftrace_startup().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The self tests for event tracer does not check if the function
tracing was successfully activated. It needs to before it continues
the tests, otherwise the wrong errors may be reported.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The register_ftrace_function() returns an error code on failure
except if the call to ftrace_startup() fails. Add a error return to
ftrace_startup() if it fails to start, allowing register_ftrace_funtion()
to return a proper error value.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits)
sched: Fix and optimise calculation of the weight-inverse
sched: Avoid going ahead if ->cpus_allowed is not changed
sched, rt: Update rq clock when unthrottling of an otherwise idle CPU
sched: Remove unused parameters from sched_fork() and wake_up_new_task()
sched: Shorten the construction of the span cpu mask of sched domain
sched: Wrap the 'cfs_rq->nr_spread_over' field with CONFIG_SCHED_DEBUG
sched: Remove unused 'this_best_prio arg' from balance_tasks()
sched: Remove noop in alloc_rt_sched_group()
sched: Get rid of lock_depth
sched: Remove obsolete comment from scheduler_tick()
sched: Fix sched_domain iterations vs. RCU
sched: Next buddy hint on sleep and preempt path
sched: Make set_*_buddy() work on non-task entities
sched: Remove need_migrate_task()
sched: Move the second half of ttwu() to the remote cpu
sched: Restructure ttwu() some more
sched: Rename ttwu_post_activation() to ttwu_do_wakeup()
sched: Remove rq argument from ttwu_stat()
sched: Remove rq->lock from the first half of ttwu()
sched: Drop rq->lock from sched_exec()
...
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Fix rt_rq runtime leakage bug
Since users of the function tracer can now pick and choose which
functions they want to trace agnostically from other users of the
function tracer, we need to pass the ops struct to the ftrace_set_filter()
functions.
The functions ftrace_set_global_filter() and ftrace_set_global_notrace()
is added to keep the old filter functions which are used to modify
the generic function tracers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that functions may be selected individually, it only makes sense
that we should allow dynamically allocated trace structures to
be traced. This will allow perf to allocate a ftrace_ops structure
at runtime and use it to pick and choose which functions that
structure will trace.
Note, a dynamically allocated ftrace_ops will always be called
indirectly instead of being called directly from the mcount in
entry.S. This is because there's no safe way to prevent mcount
from being preempted before calling the function, unless we
modify every entry.S to do so (not likely). Thus, dynamically allocated
functions will now be called by the ftrace_ops_list_func() that
loops through the ops that are allocated if there are more than
one op allocated at a time. This loop is protected with a
preempt_disable.
To determine if an ftrace_ops structure is allocated or not, a new
util function was added to the kernel/extable.c called
core_kernel_data(), which returns 1 if the address is between
_sdata and _edata.
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_ops that are registered to trace functions can now be
agnostic to each other in respect to what functions they trace.
Each ops has their own hash of the functions they want to trace
and a hash to what they do not want to trace. A empty hash for
the functions they want to trace denotes all functions should
be traced that are not in the notrace hash.
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a hash is modified and might be in use, we need to perform
a schedule RCU operation on it, as the hashes will soon be used
directly in the function tracer callback.
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This is a step towards each ops structure defining its own set
of functions to trace. As the current code with pid's and such
are specific to the global_ops, it is restructured to be used
with the global ops.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In order to allow different ops to enable different functions,
the ftrace_startup() and ftrace_shutdown() functions need the
ops parameter passed to them.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the enabled_functions file that is used to show all the
functions that have been enabled for tracing as well as their
ref counts. This helps seeing if any function has been registered
and what functions are being traced.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every function has its own record that stores the instruction
pointer and flags for the function to be traced. There are only
two flags: enabled and free. The enabled flag states that tracing
for the function has been enabled (actively traced), and the free
flag states that the record no longer points to a function and can
be used by new functions (loaded modules).
These flags are now moved to the MSB of the flags (actually just
the top 32bits). The rest of the bits (30 bits) are now used as
a ref counter. Everytime a tracer register functions to trace,
those functions will have its counter incremented.
When tracing is enabled, to determine if a function should be traced,
the counter is examined, and if it is non-zero it is set to trace.
When a ftrace_ops is registered to trace functions, its hashes
are examined. If the ftrace_ops filter_hash count is zero, then
all functions are set to be traced, otherwise only the functions
in the hash are to be traced. The exception to this is if a function
is also in the ftrace_ops notrace_hash. Then that function's counter
is not incremented for this ftrace_ops.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When filtering, allocate a hash to insert the function records.
After the filtering is complete, assign it to the ftrace_ops structure.
This allows the ftrace_ops structure to have a much smaller array of
hash buckets instead of wasting a lot of memory.
A read only empty_hash is created to be the minimum size that any ftrace_ops
can point to.
When a new hash is created, it has the following steps:
o Allocate a default hash.
o Walk the function records assigning the filtered records to the hash
o Allocate a new hash with the appropriate size buckets
o Move the entries from the default hash to the new hash.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Combine the filter and notrace hashes to be accessed by a single entity,
the global_ops. The global_ops is a ftrace_ops structure that is passed
to different functions that can read or modify the filtering of the
function tracer.
The ftrace_ops structure was modified to hold a filter and notrace
hashes so that later patches may allow each ftrace_ops to have its own
set of rules to what functions may be filtered.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When multiple users are allowed to have their own set of functions
to trace, having the FTRACE_FL_FILTER flag will not be enough to
handle the accounting of those users. Each user will need their own
set of functions.
Replace the FTRACE_FL_FILTER with a filter_hash instead. This is
temporary until the rest of the function filtering accounting
gets in.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
To prepare for the accounting system that will allow multiple users of
the function tracer, having the FTRACE_FL_NOTRACE as a flag in the
dyn_trace record does not make sense.
All ftrace_ops will soon have a hash of functions they should trace
and not trace. By making a global hash of functions not to trace makes
this easier for the transition.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This partially reverts commit e6e1e25935.
That commit changed the structure layout of the trace structure, which
in turn broke PowerTOP (1.9x generation) quite badly.
I appreciate not wanting to expose the variable in question, and
PowerTOP was not using it, so I've replaced the variable with just a
padding field - that way if in the future a new field is needed it can
just use this padding field.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The code used for matching functions is almost identical between normal
selecting of functions and using the :mod: feature of set_ftrace_notrace.
Consolidate the two users into one function.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are three locations that perform almost identical functions in order
to update the ftrace_trace_function (the ftrace function variable that gets
called by mcount).
Consolidate these into a single function called update_ftrace_function().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The updating of a function record is moved to a single function. This will allow
us to add specific changes in one location for both modules and kernel
functions.
Later patches will determine if the function record itself needs to be updated
(which enables the mcount caller), or just the ftrace_ops needs the update.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since we disable all function tracer processing if we detect
that a modification of a instruction had failed, we do not need
to track that the record has failed. No more ftrace processing
is allowed, and the FTRACE_FL_CONVERTED flag is pointless.
The FTRACE_FL_CONVERTED flag was used to denote records that were
successfully converted from mcount calls into nops. But if a single
record fails, all of ftrace is disabled.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since we disable all function tracer processing if we detect
that a modification of a instruction had failed, we do not need
to track that the record has failed. No more ftrace processing
is allowed, and the FTRACE_FL_FAILED flag is pointless.
Removing this flag simplifies some of the code, but some ftrace_disabled
checks needed to be added or move around a little.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The failures file in the debugfs tracing directory would list the
functions that failed to convert when the old dead ftrace daemon
tried to update code but failed. Since this code is now dead along
with the daemon the failures file is useless. Remove it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The disabling of interrupts around ftrace_update_code() was used
to protect against the evil ftrace daemon from years past. But that
daemon has long been killed. It is safe to keep interrupts enabled
while updating the initial mcount into nops.
The ftrace_mutex is also held which keeps other users at bay.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Let FTRACE_WARN_ON() be used as a stand alone statement or
inside a conditional: if (FTRACE_WARN_ON(x))
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If function tracing is enabled, a read of the filter files will
cause the call to stop_machine to update the function trace sites.
It should only call stop_machine on write.
Cc: stable@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Conflicts:
include/linux/perf_event.h
Merge reason: pick up the latest jump-label enhancements, they are cooked ready.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Neil Brown pointed out that lock_depth somehow escaped the BKL
removal work. Let's get rid of it now.
Note that the perf scripting utilities still have a bunch of
code for dealing with common_lock_depth in tracepoints; I have
left that in place in case anybody wants to use that code with
older kernels.
Suggested-by: Neil Brown <neilb@suse.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20110422111910.456c0e84@bike.lwn.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's a pretty close match to what we had before - the timer triggering
would mean that nobody unplugged the plug in due time, in the new
scheme this matches very closely what the schedule() unplug now is.
It's essentially the difference between an explicit unplug (IO unplug)
or an implicit unplug (timer unplug, we scheduled with pending IO
queued).
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
It was removed with the on-stack plugging, readd it and track the
depth of requests added when flushing the plug.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
running following commands:
# enable the binary option
echo 1 > ./options/bin
# disable context info option
echo 0 > ./options/context-info
# tracing only events
echo 1 > ./events/enable
cat trace_pipe
plus forcing system to generate many tracing events,
is causing lockup (in NON preemptive kernels) inside
tracing_read_pipe function.
The issue is also easily reproduced by running ltp stress test.
(ftrace_stress_test.sh)
The reasons are:
- bin/hex/raw output functions for events are set to
trace_nop_print function, which prints nothing and
returns TRACE_TYPE_HANDLED value
- LOST EVENT trace do not handle trace_seq overflow
These reasons force the while loop in tracing_read_pipe
function never to break.
The attached patch fixies handling of lost event trace, and
changes trace_nop_print to print minimal info, which is needed
for the correct tracing_read_pipe processing.
v2 changes:
- omit the cond_resched changes by trace_nop_print changes
- WARN changed to WARN_ONCE and added info to be able
to find out the culprit
v3 changes:
- make more accurate patch comment
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <20110325110518.GC1922@jolsa.brq.redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The file debugfs/tracing/printk_formats maps the addresses
to the formats that are used by trace_bprintk() so that userspace
tools can read the buffer and be able to decode trace_bprintk events
to get the format saved when reading the ring buffer directly.
This is because trace_bprintk() does not store the format into the
buffer, but just the address of the format, which is hidden in
the kernel memory.
But currently it only exports trace_bprintk()s from the kernel core
and not for modules. The modules need their formats exported
as well.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_printk() formats for modules do not show up in the
debugfs/tracing/printk_formats file. Only the formats that are
for trace_printk()s that are in the kernel core.
To facilitate the change to add trace_printk() formats from modules
into that file as well, we need to convert the structure that
holds the formats from char fmt[], into const char *fmt,
and allocate them separately.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf, x86: Complain louder about BIOSen corrupting CPU/PMU state and continue
perf, x86: P4 PMU - Read proper MSR register to catch unflagged overflows
perf symbols: Look at .dynsym again if .symtab not found
perf build-id: Add quirk to deal with perf.data file format breakage
perf session: Pass evsel in event_ops->sample()
perf: Better fit max unprivileged mlock pages for tools needs
perf_events: Fix stale ->cgrp pointer in update_cgrp_time_from_cpuctx()
perf top: Fix uninitialized 'counter' variable
tracing: Fix set_ftrace_filter probe function display
perf, x86: Fix Intel fixed counters base initialization
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
Documentation/iostats.txt: bit-size reference etc.
cfq-iosched: removing unnecessary think time checking
cfq-iosched: Don't clear queue stats when preempt.
blk-throttle: Reset group slice when limits are changed
blk-cgroup: Only give unaccounted_time under debug
cfq-iosched: Don't set active queue in preempt
block: fix non-atomic access to genhd inflight structures
block: attempt to merge with existing requests on plug flush
block: NULL dereference on error path in __blkdev_get()
cfq-iosched: Don't update group weights when on service tree
fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
block: Require subsystems to explicitly allocate bio_set integrity mempool
jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
fs: make fsync_buffers_list() plug
mm: make generic_writepages() use plugging
blk-cgroup: Add unaccounted time to timeslice_used.
block: fixup plugging stubs for !CONFIG_BLOCK
block: remove obsolete comments for blkdev_issue_zeroout.
blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
...
Fix up conflicts in fs/{aio.c,super.c}
If one or more function probes (like traceon) are enabled,
and there's no other function filter, the first probe
func is skipped (which one depends on the position in the hash).
$ echo sys_open:traceon sys_close:traceon > ./set_ftrace_filter
$ cat set_ftrace_filter
#### all functions enabled ####
sys_close:traceon:unlimited
$
The reason was, that in the case of no other function filter,
the func_pos was not properly updated before calling t_hash_start.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1297874134-7008-1-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
trace, filters: Initialize the match variable in process_ops() properly
trace, documentation: Fix branch profiling location in debugfs
oprofile, s390: Cleanups
oprofile, s390: Remove hwsampler_files.c and merge it into init.c
perf: Fix tear-down of inherited group events
perf: Reorder & optimize perf_event_context to remove alignment padding on 64 bit builds
perf: Handle stopped state with tracepoints
perf: Fix the software events state check
perf, powerpc: Handle events that raise an exception without overflowing
perf, x86: Use INTEL_*_CONSTRAINT() for all PEBS event constraints
perf, x86: Clean up SandyBridge PEBS events
perf lock: Fix sorting by wait_min
perf tools: Version incorrect with some versions of grep
perf evlist: New command to list the names of events present in a perf.data file
perf script: Add support for H/W and S/W events
perf script: Add support for dumping symbols
perf script: Support custom field selection for output
perf script: Move printing of 'common' data from print_event and rename
perf tracing: Remove print_graph_cpu and print_graph_proc from trace-event-parse
perf script: Change process_event prototype
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
Update cpuset info & webiste for cgroups
dcdbas: force SMI to happen when expected
arch/arm/Kconfig: remove one to many l's in the word.
asm-generic/user.h: Fix spelling in comment
drm: fix printk typo 'sracth'
Remove one to many n's in a word
Documentation/filesystems/romfs.txt: fixing link to genromfs
drivers:scsi Change printk typo initate -> initiate
serial, pch uart: Remove duplicate inclusion of linux/pci.h header
fs/eventpoll.c: fix spelling
mm: Fix out-of-date comments which refers non-existent functions
drm: Fix printk typo 'failled'
coh901318.c: Change initate to initiate.
mbox-db5500.c Change initate to initiate.
edac: correct i82975x error-info reported
edac: correct i82975x mci initialisation
edac: correct commented info
fs: update comments to point correct document
target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
...
Trivial conflict in fs/eventpoll.c (spelling vs addition)
Make sure the 'match' variable always has a value.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The debugfs interface for branch profiling is through
/sys/kernel/debug/tracing/trace_stat/branch_annotated
/sys/kernel/debug/tracing/trace_stat/branch_all
so update the Kconfig accordingly.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <alpine.DEB.2.00.1103161716320.11407@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In blk_add_trace_rq, we only chose the minor 2 bits from
request's cmd_flags and did some check for discard.
so most of other flags(e.g, REQ_SYNC) are missing.
For example, with a sync write after blkparse we get:
8,16 1 1 0.001776503 7509 A WS 1349632 + 1024 <- (8,17) 1347584
8,16 1 2 0.001776813 7509 Q WS 1349632 + 1024 [dd]
8,16 1 3 0.001780395 7509 G WS 1349632 + 1024 [dd]
8,16 1 5 0.001783186 7509 I W 1349632 + 1024 [dd]
8,16 1 11 0.001816987 7509 D W 1349632 + 1024 [dd]
8,16 0 2 0.006218192 0 C W 1349632 + 1024 [0]
Since now we have integrated the flags of both bio and request,
it is safe to pass rq->cmd_flags directly to __blk_add_trace.
With this patch, after a sync write we get:
8,16 1 1 0.001776900 5425 A WS 1189888 + 1024 <- (8,17) 1187840
8,16 1 2 0.001777179 5425 Q WS 1189888 + 1024 [dd]
8,16 1 3 0.001780797 5425 G WS 1189888 + 1024 [dd]
8,16 1 5 0.001783402 5425 I WS 1189888 + 1024 [dd]
8,16 1 11 0.001817468 5425 D WS 1189888 + 1024 [dd]
8,16 0 2 0.005640709 0 C WS 1189888 + 1024 [0]
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
If the kernel command line declares a tracer "ftrace=sometracer" and
that tracer is either not defined or is enabled after irqsoff,
then the irqs off selftest will fail with the following error:
Testing tracer irqsoff:
------------[ cut here ]------------
WARNING: at /home/rostedt/work/autotest/nobackup/linux-test.git/kernel/trace/tra
ce.c:713 update_max_tr_single+0xfa/0x11b()
Hardware name:
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.38-rc8-test #1
Call Trace:
[<c0441d9d>] ? warn_slowpath_common+0x65/0x7a
[<c049adb2>] ? update_max_tr_single+0xfa/0x11b
[<c0441dc1>] ? warn_slowpath_null+0xf/0x13
[<c049adb2>] ? update_max_tr_single+0xfa/0x11b
[<c049e454>] ? stop_critical_timing+0x154/0x204
[<c049b54b>] ? trace_selftest_startup_irqsoff+0x5b/0xc1
[<c049b54b>] ? trace_selftest_startup_irqsoff+0x5b/0xc1
[<c049b54b>] ? trace_selftest_startup_irqsoff+0x5b/0xc1
[<c049e529>] ? time_hardirqs_on+0x25/0x28
[<c0468bca>] ? trace_hardirqs_on_caller+0x18/0x12f
[<c0468cec>] ? trace_hardirqs_on+0xb/0xd
[<c049b54b>] ? trace_selftest_startup_irqsoff+0x5b/0xc1
[<c049b6b8>] ? register_tracer+0xf8/0x1a3
[<c14e93fe>] ? init_irqsoff_tracer+0xd/0x11
[<c040115e>] ? do_one_initcall+0x71/0x121
[<c14e93f1>] ? init_irqsoff_tracer+0x0/0x11
[<c14ce3a9>] ? kernel_init+0x13a/0x1b6
[<c14ce26f>] ? kernel_init+0x0/0x1b6
[<c0403842>] ? kernel_thread_helper+0x6/0x10
---[ end trace e93713a9d40cd06c ]---
.. no entries found ..FAILED!
What happens is the "ftrace=..." will expand the ring buffer to its
default size (from its minimum size) but it will not expand the
max ring buffer (the ring buffer to store maximum latencies).
When the irqsoff test runs, it will call the ring buffer swap routine
that checks if the max ring buffer is the same size as the normal
ring buffer, and will fail if it is not. This causes the test to fail.
The solution is to expand the max ring buffer before running the self
test if the max ring buffer is used by that tracer and the normal ring
buffer is expanded. The max ring buffer should be shrunk again after
the test is done to save space.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Trace events belonging to a module only exists when the module is
loaded. Well, we can use trace_set_clr_event funtion to enable some
trace event at the module init routine, so that we will not miss
something while loading then module.
So, Export the trace_set_clr_event function so that module can use it.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
LKML-Reference: <1289196312-25323-1-git-send-email-yuanhan.liu@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The "Delta way too big" warning might appear on a system with a
unstable shed clock right after the system is resumed and tracing
was enabled at time of suspend.
Since it's not realy a bug, and the unstable sched clock is working
fast and reliable otherwise, Steven suggested to keep using the
sched clock in any case and just to make note in the warning itself.
v2 changes:
- added #ifdef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <20110218145219.GD2604@jolsa.brq.redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Formatting change only to improve code readability. No code changes except to
introduce intermediate variables.
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1291421609-14665-13-git-send-email-dhsharp@google.com>
[ Keep variable declarations and assignment separate ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1291421609-14665-6-git-send-email-dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The lock_depth field in the event headers was added as a temporary
data point for help in removing the BKL. Now that the BKL is pretty
much been removed, we can remove this field.
This in turn changes the header from 12 bytes to 8 bytes,
removing the 4 byte buffer that gcc would insert if the first field
in the data load was 8 bytes in size.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1291421609-14665-3-git-send-email-dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add an "overwrite" trace_option for ftrace to control whether the buffer should
be overwritten on overflow or not. The default remains to overwrite old events
when the buffer is full. This patch adds the option to instead discard newest
events when the buffer is full. This is useful to get a snapshot of traces just
after enabling traces. Dropping the current event is also a simpler code path.
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1291844807-15481-1-git-send-email-dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If we enable trace events to trace block actions, We use
blk_fill_rwbs_rq to analyze the corresponding actions
in request's cmd_flags, but we only choose the minor 2 bits
from it, so most of other flags(e.g, REQ_SYNC) are missing.
For example, with a sync write we get:
write_test-2409 [001] 160.013869: block_rq_insert: 3,64 W 0 () 258135 + =
8 [write_test]
Since now we have integrated the flags of both bio and request,
it is safe to pass rq->cmd_flags directly to blk_fill_rwbs and
blk_fill_rwbs_rq isn't needed any more.
With this patch, after a sync write we get:
write_test-2417 [000] 226.603878: block_rq_insert: 3,64 WS 0 () 258135 +=
8 [write_test]
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This reverts commit 5e38ca8f3e.
Breaks the build of several !CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
architectures.
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Message-ID: <20110217171823.GB17058@elte.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add NULL check for avoiding NULL pointer deref.
This bug has been introduced by:
1ff511e35e: tracing/kprobes: Add bitfield type
which causes a null pointer dereference bug when kprobe-tracer
parses an argument without type.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110214054807.8919.69740.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
When the fuction graph tracer starts, it needs to make a special
stack for each task to save the real return values of the tasks.
All running tasks have this stack created, as well as any new
tasks.
On CPU hot plug, the new idle task will allocate a stack as well
when init_idle() is called. The problem is that cpu hotplug does
not create a new idle_task. Instead it uses the idle task that
existed when the cpu went down.
ftrace_graph_init_task() will add a new ret_stack to the task
that is given to it. Because a clone will make the task
have a stack of its parent it does not check if the task's
ret_stack is already NULL or not. When the CPU hotplug code
starts a CPU up again, it will allocate a new stack even
though one already existed for it.
The solution is to treat the idle_task specially. In fact, the
function_graph code already does, just not at init_idle().
Instead of using the ftrace_graph_init_task() for the idle task,
which that function expects the task to be a clone, have a
separate ftrace_graph_init_idle_task(). Also, we will create a
per_cpu ret_stack that is used by the idle task. When we call
ftrace_graph_init_idle_task() it will check if the idle task's
ret_stack is NULL, if it is, then it will assign it the per_cpu
ret_stack.
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
cdrom: support devices that have check_events but not media_changed
cfq-iosched: Don't wait if queue already has requests.
blkio-throttle: Avoid calling blkiocg_lookup_group() for root group
cfq: rename a function to give it more appropriate name
cciss: make cciss_revalidate not loop through CISS_MAX_LUNS volumes unnecessarily.
drivers/block/aoe/Makefile: replace the use of <module>-objs with <module>-y
loop: queue_lock NULL pointer derefence in blk_throtl_exit
drivers/block/Makefile: replace the use of <module>-objs with <module>-y
blktrace: Don't output messages if NOTIFY isn't set.
tracing_enabled should not be used, it is heavy weight and does not
do much in helping lower the overhead.
tracing_on should be used instead. Warn users to use tracing_on
when tracing_enabled is used as it will soon be removed from the
tracing directory.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace events sched_switch and sched_wakeup do the same thing
as the stand alone sched_switch tracer does. It is no longer needed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The warning "Delta way too big" warning might appear on a system with
unstable shed clock right after the system is resumed and tracing
was enabled during the suspend.
Since it's not realy bug, and the unstable sched clock is working
fast and reliable otherwise, Steven suggested to keep using the
sched clock in any case and just to make note in the warning itself.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1296649698-6003-1-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Many system calls are unimplemented and mapped to sys_ni_syscall, but at
boot ftrace would still search through every syscall metadata entry for
a match which wouldn't be there.
This patch adds causes the search to terminate early if the system call
is not mapped.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-7-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some architectures have unusual symbol names and the generic code to
match the symbol name with the function name for the syscall metadata
will fail. For example, symbols on PPC64 start with a period and the
generic code will fail to match them.
This patch moves the match logic out into a separate function which an
arch can override by defining ARCH_HAS_SYSCALL_MATCH_SYM_NAME in
asm/ftrace.h and implementing arch_syscall_match_sym_name.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-5-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some architectures use non-trivial system call tables and will not work
with the generic arch_syscall_addr code. For example, PowerPC64 uses a
table of twin long longs.
This patch makes the generic arch_syscall_addr weak to allow
architectures with non-trivial system call tables to override it.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-4-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the ftrace events now checking if the syscall_nr is valid upon
initialisation it should no longer be possible to register or unregister
a syscall event without a valid syscall_nr since they should not be
created. This adds a WARN_ON_ONCE in the register and unregister
functions to locate potential regressions in the future.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-3-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
FTRACE_SYSCALLS would create events for each and every system call, even
if it had failed to map the system call's name with it's number. This
resulted in a number of events being created that would not behave as
expected.
This could happen, for example, on architectures who's symbol names are
unusual and will not match the system call name. It could also happen
with system calls which were mapped to sys_ni_syscall.
This patch changes the default system call number in the metadata to -1.
If the system call name from the metadata is not successfully mapped to
a system call number during boot, than the event initialisation routine
will now return an error, preventing the event from being created.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
LKML-Reference: <1296703645-18718-2-git-send-email-imunsie@au1.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Because the filters are processed first and then activated
(added to the call), we no longer need to worry about the preds
of the filter in __alloc_preds() being used. As the filter that
is allocating preds is not activated yet.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When creating a new filter, instead of allocating the filter to the
event call first and then processing the filter, it is easier to
process a temporary filter and then just swap it with the call filter.
By doing this, it simplifies the code.
A filter is allocated and processed, when it is done, it is
swapped with the call filter, synchronize_sched() is called to make
sure all callers are done with the old filter (filters are called
with premption disabled), and then the old filter is freed.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that the filter logic does not require to save the pred results
on the stack, we can increase the max number of preds we allow.
As the preds are index by a short value, and we use the MSBs as flags
we can increase the max preds to 2^14 (16384) which should be way
more than enough.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The MAX_FILTER_PRED is only needed by the kernel/trace/*.c files.
Move it to kernel/trace/trace.h.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are many cases that a filter will contain multiple ORs or
ANDs together near the leafs. Walking up and down the tree to get
to the next compare can be a waste.
If there are several ORs or ANDs together, fold them into a single
pred and allocate an array of the conditions that they check.
This will speed up the filter by linearly walking an array
and can still break out if a short circuit condition is met.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since the filter walks a tree to determine if a match is made or not,
if the tree was incorrectly created, it could cause an infinite loop.
Add a check to walk the entire tree before assigning it as a filter
to make sure the tree is correct.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The test if we should break out early for OR and AND operations
can be optimized by comparing the current result with
(pred->op == OP_OR)
That is if the result is true and the op is an OP_OR, or
if the result is false and the op is not an OP_OR (thus an OP_AND)
we can break out early in either case. Otherwise we continue
processing.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the filter_match_preds() requires a stack to push
and pop the preds to determine if the filter matches the record or not.
This has two drawbacks:
1) It requires a stack to store state information. As this is done
in fast paths we can't allocate the storage for this stack, and
we can't use a global as it must be re-entrant. The stack is stored
on the kernel stack and this greatly limits how many preds we
may allow.
2) All conditions are calculated even when a short circuit exists.
a || b will always calculate a and b even though a was determined
to be true.
Using a tree we can walk a constant structure that will save
the state as we go. The algorithm is simply:
pred = root;
do {
switch (move) {
case MOVE_DOWN:
if (OR or AND) {
pred = left;
continue;
}
if (pred == root)
break;
match = pred->fn();
pred = pred->parent;
move = left child ? MOVE_UP_FROM_LEFT : MOVE_UP_FROM_RIGHT;
continue;
case MOVE_UP_FROM_LEFT:
/* Only OR or AND can be a parent */
if (match && OR || !match && AND) {
/* short circuit */
if (pred == root)
break;
pred = pred->parent;
move = left child ?
MOVE_UP_FROM_LEFT :
MOVE_UP_FROM_RIGHT;
continue;
}
pred = pred->right;
move = MOVE_DOWN;
continue;
case MOVE_UP_FROM_RIGHT:
if (pred == root)
break;
pred = pred->parent;
move = left child ? MOVE_UP_FROM_LEFT : MOVE_UP_FROM_RIGHT;
continue;
}
done = 1;
} while (!done);
This way there's no strict limit to how many preds we allow
and it also will short circuit the logical operations when possible.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently we allocate an array of pointers to filter_preds, and then
allocate a separate filter_pred for each item in the array.
This adds slight overhead in the filters as it needs to derefernce
twice to get to the op condition.
Allocating the preds themselves in a single array removes a dereference
as well as helps on the cache footprint.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
By separating out the reseting of the filter->n_preds to zero from
the reallocation of preds for the filter, we can reset groups of
filters first, call synchronize_sched() just once, and then reallocate
each of the filters in the system group.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For every filter that is made, we create predicates to hold every
operation within the filter. We have a max of 32 predicates that we
can hold. Currently, we allocate all 32 even if we only need to
use one.
Part of the reason we do this is that the filter can be used at
any moment by any event. Fortunately, the filter is only used
with preemption disabled. By reseting the count of preds used "n_preds"
to zero, then performing a synchronize_sched(), we can safely
free and reallocate a new array of preds.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ops OR and AND act different from the other ops, as they
are the only ones to take other ops as their arguements.
These ops als change the logic of the filter_match_preds.
By removing the OR and AND fn's we can also remove the val1 and val2
that is passed to all other fn's and are unused.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The n_preds field of a file can change at anytime, and even can become
zero, just as the filter is about to be processed by an event.
In the case that is zero on entering the filter, return 1, telling
the caller the event matchs and should be trace.
Also use a variable and assign it with ACCESS_ONCE() such that the
count stays consistent within the function.
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add bitfield type for tracing arguments on kprobe-tracer. The syntax of
a bitfield type is:
b<bit-size>@<bit-offset>/<container-size>
e.g.
Accessing 2 bits-width field with 4 bits-offset in 32 bits-width data at
4 bytes offseted from the address pointed by AX register:
+4(%ax):b2@4/32
Since the width of container data depends on the arch, so I just added
the container-size at the end.
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20110204125205.9507.11363.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since strict_strtol() accepts minus digits started with '-', it doesn't
need to invert after converting.
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20110204125153.9507.49335.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the syscall_meta structures for the syscall tracepoints are
placed in the __syscall_metadata section, and at link time, the linker
makes one large array of all these syscall metadata structures. On boot
up, this array is read (much like the initcall sections) and the syscall
data is processed.
The problem is that there is no guarantee that gcc will place complex
structures nicely together in an array format. Two structures in the
same file may be placed awkwardly, because gcc has no clue that they
are suppose to be in an array.
A hack was used previous to force the alignment to 4, to pack the
structures together. But this caused alignment issues with other
architectures (sparc).
Instead of packing the structures into an array, the structures' addresses
are now put into the __syscall_metadata section. As pointers are always the
natural alignment, gcc should always pack them tightly together
(otherwise initcall, extable, etc would also fail).
By having the pointers to the structures in the section, we can still
iterate the trace_events without causing unnecessary alignment problems
with other architectures, or depending on the current behaviour of
gcc that will likely change in the future just to tick us kernel developers
off a little more.
The __syscall_metadata section is also moved into the .init.data section
as it is now only needed at boot up.
Suggested-by: David Miller <davem@davemloft.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the trace_event structures are placed in the _ftrace_events
section, and at link time, the linker makes one large array of all
the trace_event structures. On boot up, this array is read (much like
the initcall sections) and the events are processed.
The problem is that there is no guarantee that gcc will place complex
structures nicely together in an array format. Two structures in the
same file may be placed awkwardly, because gcc has no clue that they
are suppose to be in an array.
A hack was used previous to force the alignment to 4, to pack the
structures together. But this caused alignment issues with other
architectures (sparc).
Instead of packing the structures into an array, the structures' addresses
are now put into the _ftrace_event section. As pointers are always the
natural alignment, gcc should always pack them tightly together
(otherwise initcall, extable, etc would also fail).
By having the pointers to the structures in the section, we can still
iterate the trace_events without causing unnecessary alignment problems
with other architectures, or depending on the current behaviour of
gcc that will likely change in the future just to tick us kernel developers
off a little more.
The _ftrace_event section is also moved into the .init.data section
as it is now only needed at boot up.
Suggested-by: David Miller <davem@davemloft.net>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
During early boot, local IRQ is disabled until IRQ subsystem is
properly initialized. During this time, no one should enable
local IRQ and some operations which usually are not allowed with
IRQ disabled, e.g. operations which might sleep or require
communications with other processors, are allowed.
lockdep tracked this with early_boot_irqs_off/on() callbacks.
As other subsystems need this information too, move it to
init/main.c and make it generally available. While at it,
toggle the boolean to early_boot_irqs_disabled instead of
enabled so that it can be initialized with %false and %true
indicates the exceptional condition.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110120110635.GB6036@htj.dyndns.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now if we enable blktrace, cfq has too many messages output to the
trace buffer. It is fine if we don't specify any action mask.
But if I do like this:
blktrace /dev/sdb -a issue -a complete -o - | blkparse -i -
I only want to see 'D' and 'C', while with the following command
dd if=/mnt/ocfs2/test of=/dev/null bs=4k count=1 iflag=direct
I will get(with a 2.6.37 vanilla kernel):
8,16 0 0 0.000000000 0 m N cfq3805 alloced
8,16 0 0 0.000004126 0 m N cfq3805 insert_request
8,16 0 0 0.000004884 0 m N cfq3805 add_to_rr
8,16 0 0 0.000008417 0 m N cfq workload slice:300
8,16 0 0 0.000009557 0 m N cfq3805 set_active wl_prio:0 wl_type:2
8,16 0 0 0.000010640 0 m N cfq3805 fifo= (null)
8,16 0 0 0.000011193 0 m N cfq3805 dispatch_insert
8,16 0 0 0.000012221 0 m N cfq3805 dispatched a request
8,16 0 0 0.000012802 0 m N cfq3805 activate rq, drv=1
8,16 0 1 0.000013181 3805 D R 114759 + 8 [dd]
8,16 0 2 0.000164244 0 C R 114759 + 8 [0]
8,16 0 0 0.000167997 0 m N cfq3805 complete rqnoidle 0
8,16 0 0 0.000168782 0 m N cfq3805 set_slice=100
8,16 0 0 0.000169874 0 m N cfq3805 arm_idle: 8 group_idle: 0
8,16 0 0 0.000170189 0 m N cfq schedule dispatch
8,16 0 0 0.000397938 0 m N cfq3805 slice expired t=0
8,16 0 0 0.000399763 0 m N cfq3805 sl_used=1 disp=1 charge=1 iops=0 sect=8
8,16 0 0 0.000400227 0 m N cfq3805 del_from_rr
8,16 0 0 0.000400882 0 m N cfq3805 put_queue
See, there are 19 lines while I only need 2. I don't think it is
appropriate for a user.
So this patch will disable any messages if the BLK_TC_NOTIFY isn't set.
Now the output for the same command will look like:
8,16 0 1 0.000000000 4908 D R 114759 + 8 [dd]
8,16 0 2 0.000146827 0 C R 114759 + 8 [0]
Yes, it is what I want to see.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Fix a bunch of
warning: ‘inline’ is not at beginning of declaration
messages when building a 'make allyesconfig' kernel with -Wextra.
These warnings are trivial to kill, yet rather annoying when building with
-Wextra.
The more we can cut down on pointless crap like this the better (IMHO).
A previous patch to do this for a 'allnoconfig' build has already been
merged. This just takes the cleanup a little further.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
rcu: avoid pointless blocked-task warnings
rcu: demote SRCU_SYNCHRONIZE_DELAY from kernel-parameter status
rtmutex: Fix comment about why new_owner can be NULL in wake_futex_pi()
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, olpc: Add missing Kconfig dependencies
x86, mrst: Set correct APB timer IRQ affinity for secondary cpu
x86: tsc: Fix calibration refinement conditionals to avoid divide by zero
x86, ia64, acpi: Clean up x86-ism in drivers/acpi/numa.c
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timekeeping: Make local variables static
time: Rename misnamed minsec argument of clocks_calc_mult_shift()
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Remove syscall_exit_fields
tracing: Only process module tracepoints once
perf record: Add "nodelay" mode, disabled by default
perf sched: Fix list of events, dropping unsupported ':r' modifier
Revert "perf tools: Emit clearer message for sys_perf_event_open ENOENT return"
perf top: Fix annotate segv
perf evsel: Fix order of event list deletion
There is no need for syscall_exit_fields as the syscall
exit event class can already host the fields in its structure,
like most other trace events do by default. Use that
default behavior instead.
Following this scheme, we don't need anymore to override the
get_fields() callback of the syscall exit event class either.
Hence both syscall_exit_fields and syscall_get_exit_fields() can
be removed.
Also changed some indentation to keep the following under 80
characters:
".fields = LIST_HEAD_INIT(event_class_syscall_exit.fields),"
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4D301C0E.8090408@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
block: ensure that completion error gets properly traced
blktrace: add missing probe argument to block_bio_complete
block cfq: don't use atomic_t for cfq_group
block cfq: don't use atomic_t for cfq_queue
block: trace event block fix unassigned field
block: add internal hd part table references
block: fix accounting bug on cross partition merges
kref: add kref_test_and_get
bio-integrity: mark kintegrityd_wq highpri and CPU intensive
block: make kblockd_workqueue smarter
Revert "sd: implement sd_check_events()"
block: Clean up exit_io_context() source code.
Fix compile warnings due to missing removal of a 'ret' variable
fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
cfq-iosched: don't check cfqg in choose_service_tree()
fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
cdrom: export cdrom_check_events()
sd: implement sd_check_events()
sr: implement sr_check_events()
...
We normally just use the BIO_UPTODATE flag to signal 0/-EIO. If
we have more information available, we should pass that along to
the trace output.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
DEFINE_TRACE should also exist when CONFIG_EVENT_TRACING=n. Otherwise, setting
only TRACEPOINTS=y is broken.
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20101028153117.GA4051@Krystal>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
While running my ftrace stress test, this showed up:
BUG: sleeping function called from invalid context at mm/mmap.c:233
...
note: cat[3293] exited with preempt_count 1
The bug was introduced by commit 91e86e560d
("tracing: Fix recursive user stack trace")
Cc: <stable@kernel.org>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4D0089AC.1020802@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Function-scope statics are discouraged because they are
easily overlooked and can cause subtle bugs/races due to
their global (non-SMP safe) nature.
Linus noticed that we did this for sched_param - at minimum
make the const.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: Message-ID: <AANLkTinotRxScOHEb0HgFgSpGPkq_6jKTv5CfvnQM=ee@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
blktrace.c block bio complete callback needs to gain a new argument to reflect
the newly added "error" tracepoint argument. This is needed to match the new
block_bio_complete TRACE_EVENT as of
commit de983a7bfcb7c020901ca6e2314cf55a4207ab5a.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: Jeff Moyer <jmoyer@redhat.com>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
sched: Change wait_for_completion_*_timeout() to return a signed long
sched, autogroup: Fix reference leak
sched, autogroup: Fix potential access to freed memory
sched: Remove redundant CONFIG_CGROUP_SCHED ifdef
sched: Fix interactivity bug by charging unaccounted run-time on entity re-weight
sched: Move periodic share updates to entity_tick()
printk: Use this_cpu_{read|write} api on printk_pending
sched: Make pushable_tasks CONFIG_SMP dependant
sched: Add 'autogroup' scheduling feature: automated per session task groups
sched: Fix unregister_fair_sched_group()
sched: Remove unused argument dest_cpu to migrate_task()
mutexes, sched: Introduce arch_mutex_cpu_relax()
sched: Add some clock info to sched_debug
cpu: Remove incorrect BUG_ON
cpu: Remove unused variable
sched: Fix UP build breakage
sched: Make task dump print all 15 chars of proc comm
sched: Update tg->shares after cpu.shares write
sched: Allow update_cfs_load() to update global load
sched: Implement demand based update_cfs_load()
...
Add these new power trace events:
power:cpu_idle
power:cpu_frequency
power:machine_suspend
The old C-state/idle accounting events:
power:power_start
power:power_end
Have now a replacement (but we are still keeping the old
tracepoints for compatibility):
power:cpu_idle
and
power:power_frequency
is replaced with:
power:cpu_frequency
power:machine_suspend is newly introduced.
Jean Pihet has a patch integrated into the generic layer
(kernel/power/suspend.c) which will make use of it.
the type= field got removed from both, it was never
used and the type is differed by the event type itself.
perf timechart userspace tool gets adjusted in a separate patch.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Jean Pihet <jean.pihet@newoldbits.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: rjw@sisk.pl
LKML-Reference: <1294073445-14812-3-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>
power_frequency moved to drivers/cpufreq/cpufreq.c which has
to be compiled in, no need to export it.
intel_idle can a be module though...
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jean Pihet <jean.pihet@newoldbits.com>
Cc: Jean Pihet <j-pihet@ti.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: rjw@sisk.pl
LKML-Reference: <1294073445-14812-2-git-send-email-trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1290072314-31155-2-git-send-email-trenn@suse.de>
Fix two related problems in the event-copying loop of
ring_buffer_read_page.
The loop condition for copying events is off-by-one.
"len" is the remaining space in the caller-supplied page.
"size" is the size of the next event (or two events).
If len == size, then there is just enough space for the next event.
size was set to rb_event_ts_length, which may include the size of two
events if the first event is a time-extend, in order to assure time-
extends are kept together with the event after it. However,
rb_advance_reader always advances by one event. This would result in the
event after any time-extend being duplicated. Instead, get the size of
a single event for the memcpy, but use rb_event_ts_length for the loop
condition.
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1293064704-8101-1-git-send-email-dhsharp@google.com>
LKML-Reference: <AANLkTin7nLrRPc9qGjdjHbeVDDWiJjAiYyb-L=gH85bx@mail.gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Conflicts:
MAINTAINERS
arch/arm/mach-omap2/pm24xx.c
drivers/scsi/bfa/bfa_fcpim.c
Needed to update to apply fixes for which the old branch was too
outdated.
The file_ops struct for the "trace" special file defined llseek as seq_lseek().
However, if the file was opened for writing only, seq_open() was not called,
and the seek would dereference a null pointer, file->private_data.
This patch introduces a new wrapper for seq_lseek() which checks if the file
descriptor is opened for reading first. If not, it does nothing.
Cc: <stable@kernel.org>
Signed-off-by: Slava Pestov <slavapestov@google.com>
LKML-Reference: <1290640396-24179-1-git-send-email-slavapestov@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf symbols: Remove incorrect open-coded container_of()
perf record: Handle restrictive permissions in /proc/{kallsyms,modules}
x86/kprobes: Prevent kprobes to probe on save_args()
irq_work: Drop cmpxchg() result
perf: Fix owner-list vs exit
x86, hw_nmi: Move backtrace_mask declaration under ARCH_HAS_NMI_WATCHDOG
tracing: Fix recursive user stack trace
perf,hw_breakpoint: Initialize hardware api earlier
x86: Ignore trap bits on single step exceptions
tracing: Force arch_local_irq_* notrace for paravirt
tracing: Fix module use of trace_bprintk()
Currently we have in something like the sched_switch event:
field:char prev_comm[TASK_COMM_LEN]; offset:12; size:16; signed:1;
When a userspace tool such as perf tries to parse this, the
TASK_COMM_LEN is meaningless. This is done because the TRACE_EVENT() macro
simply uses a #len to show the string of the length. When the length is
an enum, we get a string that means nothing for tools.
By adding a static buffer and a mutex to protect it, we can store the
string into that buffer with snprintf and show the actual number.
Now we get:
field:char prev_comm[16]; offset:12; size:16; signed:1;
Something much more useful.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This adds a new trace event internal flag that allows them to be
used in perf by non privileged users in case of task bound tracing.
This is desired for syscalls tracepoint because they don't leak
global system informations, like some other tracepoints.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.
Remove this too as a cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] kprobes: Fix the return address of multiple kretprobes
[S390] kprobes: disable interrupts throughout
[S390] ftrace: build without frame pointers on s390
[S390] mm: add devmem_is_allowed() for STRICT_DEVMEM checking
[S390] vmlogrdr: purge after recording is switched off
[S390] cio: fix incorrect ccw_device_init_count
[S390] tape: add medium state notifications
[S390] fix get_user_pages_fast
The user stack trace can fault when examining the trace. Which
would call the do_page_fault handler, which would trace again,
which would do the user stack trace, which would fault and call
do_page_fault again ...
Thus this is causing a recursive bug. We need to have a recursion
detector here.
[ Resubmitted by Jiri Olsa ]
[ Eric Dumazet recommended using __this_cpu_* instead of __get_cpu_* ]
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1289390172-9730-3-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
REQ_HARDBARRIER is dead now, so remove the leftovers. What's left
at this point is:
- various checks inside the block layer.
- sanity checks in bio based drivers.
- now unused bio_empty_barrier helper.
- Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while,
but Xen really needs to sort out it's barrier situaton.
- setting of ordered tags in uas - dead code copied from old scsi
drivers.
- scsi different retry for barriers - it's dead and should have been
removed when flushes were converted to FS requests.
- blktrace handling of barriers - removed. Someone who knows blktrace
better should add support for REQ_FLUSH and REQ_FUA, though.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
s390 doesn't need FRAME_POINTERS in order to have a working function tracer.
We don't need frame pointers in order to get strack traces since we always
have valid backchains by using the -mkernel-backchain gcc option.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Andrew Morton pointed out almost all sched_setscheduler() callers are
using fixed parameters and can be converted to static. It reduces runtime
memory use a little.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: James Morris <jmorris@namei.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that include/linux/kdb.h properly exports all the functions
required to dynamically add a kdb shell command, the reference to the
private kdb header can be removed.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
vfs: make no_llseek the default
vfs: don't use BKL in default_llseek
llseek: automatically add .llseek fop
libfs: use generic_file_llseek for simple_attr
mac80211: disallow seeks in minstrel debug code
lirc: make chardev nonseekable
viotape: use noop_llseek
raw: use explicit llseek file operations
ibmasmfs: use generic_file_llseek
spufs: use llseek in all file operations
arm/omap: use generic_file_llseek in iommu_debug
lkdtm: use generic_file_llseek in debugfs
net/wireless: use generic_file_llseek in debugfs
drm: use noop_llseek
* 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
BKL: introduce CONFIG_BKL.
dabusb: remove the BKL
sunrpc: remove the big kernel lock
init/main.c: remove BKL notations
blktrace: remove the big kernel lock
rtmutex-tester: make it build without BKL
dvb-core: kill the big kernel lock
dvb/bt8xx: kill the big kernel lock
tlclk: remove big kernel lock
fix rawctl compat ioctls breakage on amd64 and itanic
uml: kill big kernel lock
parisc: remove big kernel lock
cris: autoconvert trivial BKL users
alpha: kill big kernel lock
isapnp: BKL removal
s390/block: kill the big kernel lock
hpet: kill BKL, add compat_ioctl
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits)
arm: remove machine_desc.io_pg_offst and .phys_io
arm: use addruart macro to establish debug mappings
arm: return both physical and virtual addresses from addruart
arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC
ARM: make struct machine_desc definition coherent with its comment
eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free
cpuimx27: fix compile when ULPI is selected
mach-pcm037_eet: fix compile errors
Fixing ethernet driver compilation error for i.MX31 ADS board
cpuimx51: update board support
mx5: add cpuimx51sd module and its baseboard
iomux-mx51: fix GPIO_1_xx 's IOMUX configuration
imx-esdhc: update devices registration
mx51: add resources for SD/MMC on i.MX51
iomux-mx51: fix SD1 and SD2's iomux configuration
clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability
clock-mx51: factorize clk_set_parent and clk_get_rate
eukrea_mbimxsd: add support for DVI displays
cpuimx25 & cpuimx35: fix OTG port registration in host mode
i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472
...
The tracing per_cpu buffers were limited to 999 CPUs for a mear
savings in stack space of a char array. Up the array to 30 characters
which is more than enough to hold a 64 bit number.
Reported-by: Robin Holt <holt@sgi.com>
Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the binding of time extends to events we no longer need to use
the macro RB_TIMESTAMPS_PER_PAGE. Remove it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a condition to check if we should add a time extend or
not in the fast path. But this condition is racey (in the sense
that we can add a unnecessary time extend, but nothing that
can break anything). We later check if the time or event time
delta should be zero or have real data in it (not racey), making
this first check redundant.
This check may help save space once in a while, but really is
not worth the hassle to try to save some space that happens at
most 134 ms at a time.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the time between two timestamps is greater than
2^27 nanosecs (~134 ms) a time extend event is added that extends
the time difference to 59 bits (~18 years). This is due to
events only having a 27 bit field to store time.
Currently this time extend is a separate event. We add it just before
the event data that is being written to the buffer. But before
the event data is committed, the event data can also be discarded (as
with the case of filters). But because the time extend has already been
committed, it will stay in the buffer.
If lots of events are being filtered and no event is being
written, then every 134ms a time extend can be added to the buffer
without any data attached. To keep from filling the entire buffer
with time extends, a time extend will never be the first event
in a page because the page timestamp can be used. Time extends can
only fill the rest of a page with some data at the beginning.
This patch binds the time extend with the data. The difference here
is that the time extend is not committed before the data is added.
Instead, when a time extend is needed, the space reserved on
the ring buffer is the time extend + the data event size. The
time extend is added to the first part of the reserved block and
the data is added to the second. The time extend event is passed
back to the reserver, but since the reserver also uses a function
to find the data portion of the reserved block, no changes to the
ring buffer interface need to be made.
When a commit is discarded, we now remove both the time extend and
the event. With this approach no more than one time extend can
be in the buffer in a row. Data must always follow a time extend.
Thanks to Mathieu Desnoyers for suggesting this idea.
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The delta between events is passed to the timestamp code by reference
and the timestamp code will reset the value. But it can be reset
from the caller. No need to pass it in by reference.
By changing the call to pass by value, lets gcc optimize the code
a bit more where it can store the delta in a register and not
worry about updating the reference.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The original code for the ring buffer had locations that modified
the timestamp and that change was used by the callers. Now,
the timestamp is not reused by the callers and there is no reason
to pass it by reference.
By changing the call to pass by value, lets gcc optimize the code
a bit more where it can store the timestamp in a register and not
worry about updating the reference.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Gcc inlines the slow path of the ring buffer write which can
hurt performance. This patch simply forces the slow path function
rb_move_tail() to always be a function.
The ring_buffer_benchmark module with reader_disabled=1 shows that
this patch changes the time to record an event from 135 ns to
132 ns. (3 ns or 2.22% improvement)
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function start_func_tracer() was incorrectly added in the
#ifdef CONFIG_FUNCTION_TRACER condition, but is still used even
when function tracing is not enabled.
The calls to register_ftrace_function() and register_ftrace_graph()
become nops (and their arguments are even ignored), thus there is
no reason to hide start_func_tracer() when function tracing is
not enabled.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
According to Jens, this code does not need the BKL at all,
it is sufficiently serialized by bd_mutex.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Even though the parent is recorded with the normal function tracing
of the latency tracers (irqsoff and wakeup), the function graph
recording is bogus.
This is due to the function graph messing with the return stack.
The latency tracers pass in as the parent CALLER_ADDR0, which
works fine for plain function tracing. But this causes bogus output
with the graph tracer:
3) <idle>-0 | d.s3. 0.000 us | return_to_handler();
3) <idle>-0 | d.s3. 0.000 us | _raw_spin_unlock_irqrestore();
3) <idle>-0 | d.s3. 0.000 us | return_to_handler();
3) <idle>-0 | d.s3. 0.000 us | trace_hardirqs_on();
The "return_to_handle()" call is the trampoline of the
function graph tracer, and is meaningless in this context.
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The preempt and irqsoff tracers have three types of function tracers.
Normal function tracer, function graph entry, and function graph return.
Each of these use a complex dance to prevent recursion and whether
to trace the data or not (depending if interrupts are enabled or not).
This patch moves the duplicate code into a single routine, to
prevent future mistakes with modifying duplicate complex code.
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The wakeup tracer has three types of function tracers. Normal
function tracer, function graph entry, and function graph return.
Each of these use a complex dance to prevent recursion and whether
to trace the data or not (depending on the wake_task variable).
This patch moves the duplicate code into a single routine, to
prevent future mistakes with modifying duplicate complex code.
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add function graph support for wakeup latency tracer.
The graph output is enabled by setting the 'display-graph'
trace option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1285243253-7372-4-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move trace_graph_function() and print_graph_headers_flags() functions
to the trace_function_graph.c to be globaly available.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1285243253-7372-3-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The check_irq_entry and check_irq_return could be called
from graph event context. In such case there's no graph
private data allocated. Adding checks to handle this case.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <20100924154102.GB1818@jolsa.brq.redhat.com>
[ Fixed some grammar in the comments ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
The config option used by archs to let the build system know that
the C version of the recordmcount works for said arch is currently
called HAVE_C_MCOUNT_RECORD which enables BUILD_C_RECORDMCOUNT. To
be more consistent with the name that all archs may use, it has been
renamed to HAVE_C_RECORDMCOUNT. This will be less confusing since
we are building a C recordmcount and not a mcount_record.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: <linux-arch@vger.kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Cc: John Reiser <jreiser@bitwagon.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds the support for the C version of recordmcount and
compile times show ~ 12% improvement.
After verifying this works, other archs can add:
HAVE_C_MCOUNT_RECORD
in its Kconfig and it will use the C version of recordmcount
instead of the perl version.
Cc: <linux-arch@vger.kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Cc: John Reiser <jreiser@bitwagon.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix
kernel/trace/trace_functions_graph.c: In function ‘trace_print_graph_duration’:
kernel/trace/trace_functions_graph.c:652: warning: comparison of distinct pointer types lacks a cast
when building 36-rc6 on a 32-bit due to the strict type check failing
in the min() macro.
Signed-off-by: Borislav Petkov <bp@alien8.de>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20100929080823.GA13595@liondog.tnic>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Time stamps for the ring buffer are created by the difference between
two events. Each page of the ring buffer holds a full 64 bit timestamp.
Each event has a 27 bit delta stamp from the last event. The unit of time
is nanoseconds, so 27 bits can hold ~134 milliseconds. If two events
happen more than 134 milliseconds apart, a time extend is inserted
to add more bits for the delta. The time extend has 59 bits, which
is good for ~18 years.
Currently the time extend is committed separately from the event.
If an event is discarded before it is committed, due to filtering,
the time extend still exists. If all events are being filtered, then
after ~134 milliseconds a new time extend will be added to the buffer.
This can only happen till the end of the page. Since each page holds
a full timestamp, there is no reason to add a time extend to the
beginning of a page. Time extends can only fill a page that has actual
data at the beginning, so there is no fear that time extends will fill
more than a page without any data.
When reading an event, a loop is made to skip over time extends
since they are only used to maintain the time stamp and are never
given to the caller. As a paranoid check to prevent the loop running
forever, with the knowledge that time extends may only fill a page,
a check is made that tests the iteration of the loop, and if the
iteration is more than the number of time extends that can fit in a page
a warning is printed and the ring buffer is disabled (all of ftrace
is also disabled with it).
There is another event type that is called a TIMESTAMP which can
hold 64 bits of data in the theoretical case that two events happen
18 years apart. This code has not been implemented, but the name
of this event exists, as well as the structure for it. The
size of a TIMESTAMP is 16 bytes, where as a time extend is only
8 bytes. The macro used to calculate how many time extends can fit on
a page used the TIMESTAMP size instead of the time extend size
cutting the amount in half.
The following test case can easily trigger the warning since we only
need to have half the page filled with time extends to trigger the
warning:
# cd /sys/kernel/debug/tracing/
# echo function > current_tracer
# echo 'common_pid < 0' > events/ftrace/function/filter
# echo > trace
# echo 1 > trace_marker
# sleep 120
# cat trace
Enabling the function tracer and then setting the filter to only trace
functions where the process id is negative (no events), then clearing
the trace buffer to ensure that we have nothing in the buffer,
then write to trace_marker to add an event to the beginning of a page,
sleep for 2 minutes (only 35 seconds is probably needed, but this
guarantees the bug), and then finally reading the trace which will
trigger the bug.
This patch fixes the typo and prevents the false positive of that warning.
Reported-by: Hans J. Koch <hjk@linutronix.de>
Tested-by: Hans J. Koch <hjk@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Initialize the workqueue data structures *before* they are registered
so that they are ready for callbacks.
Signed-off-by: Jason Baron <jbaron@redhat.com>
LKML-Reference: <e3a3383fc370ac7086625bebe89d9480d7caf372.1284733808.git.jbaron@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The enums for FTRACE_ENABLE_MCOUNT and FTRACE_DISABLE_MCOUNT were
used as commands to ftrace_run_update_code(). But these commands
were used by the old nasty ftrace daemon that has long been slain.
This is a clean up patch to remove the references to these enums
and simplify the code a little.
Reported-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the function graph tracer funcgraph-irq option is zero, disable
tracing in IRQs. This makes the option have two effects.
1) When reading the trace file, do not display the functions that
happen in interrupt context (when detected)
2) [*new*] When recording a trace, skip those that are detected
to be in interrupt by the 'in_irq()' function
Note, in_irq() is updated at irq_enter() and irq_exit(). There are
still functions that are recorded by the function graph tracer that
is in interrupt context but outside the irq_enter/exit() routines.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It's handy to be able to disable the irq related output
and not to have to jump over each irq related code, when
you have no interrest in it.
The option is by default enabled, so there's no change to
current behaviour. It affects only the final output, so all
the irq related data stay in the ring buffer.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <20100907145344.GC1912@jolsa.brq.redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If we do:
# cd /sys/kernel/debug
# echo 'do_IRQ:traceon schedule:traceon sys_write:traceon' > \
set_ftrace_filter
# cat set_ftrace_filter
We get the following output:
#### all functions enabled ####
sys_write:traceon:unlimited
schedule:traceon:unlimited
do_IRQ:traceon:unlimited
This outputs two lists. One is the fact that all functions are
currently enabled for function tracing, the other has three probed
functions, which happen to have 'traceon' as their commands.
Currently, when reading the first list (functions enabled) the
seq_file code will receive a "NULL" from the t_next() function
causing it to exit early. This makes "read()" from userspace stop
reading the code at this boarder. Although read is allowed to do this,
some (broken) applications might consider this an end of file and
stop early.
This patch adds the start of the second list to t_next() when it
finishes the first list. It is a simple change and gives the
set_ftrace_filter file nicer reading ability.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch keeps track of the index within the elements of
set_ftrace_filter and if the position goes backwards, it nicely
resets and starts from the beginning again.
This allows for lseek and pread to work properly now.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The set_ftrace_filter uses seq_file and reads from two lists. The
pointer returned by t_next() can either be of type struct dyn_ftrace
or struct ftrace_func_probe. If there is a bug (there was one)
the wrong pointer may be used and the reference can cause an oops.
This patch makes t_next() and friends only return the iterator structure
which now has a pointer of type struct dyn_ftrace and struct
ftrace_func_probe. The t_show() can now test if the pointer is NULL or
not and if the pointer exists, it is guaranteed to be of the correct type.
Now if there's a bug, only wrong data will be shown but not an oops.
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
After the filtered functions are read, the probed functions are read
from the hash in set_ftrace_filter. When the hashed probed functions
are read, the *pos passed in is reset. Instead of modifying the pos
given to the read function, just record the pos where the filtered
functions ended and subtract from that.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: t_start: reset FTRACE_ITER_HASH in case of seek/pread
perf symbols: Fix multiple initialization of symbol system
perf: Fix CPU hotplug
perf, trace: Fix module leak
tracing/kprobe: Fix handling of C-unlike argument names
tracing/kprobes: Fix handling of argument names
perf probe: Fix handling of arguments names
perf probe: Fix return probe support
tracing/kprobe: Fix a memory leak in error case
tracing: Do not allow llseek to set_ftrace_filter
Be sure to avoid entering t_show() with FTRACE_ITER_HASH set without
having properly started the iterator to iterate the hash. This case is
degenerate and, as discovered by Robert Swiecki, can cause t_hash_show()
to misuse a pointer. This causes a NULL ptr deref with possible security
implications. Tracked as CVE-2010-3079.
Cc: Robert Swiecki <swiecki@google.com>
Cc: Eugene Teo <eugene@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.
The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.
This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).
It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).
The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:
1) We disable the counter:
a) the pmu has per-counter enable bits, we flip that
b) we program a NOP event, preserving the counter state
2) We store the counter state and ignore all read/overflow events
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
gcc-4.6: kernel/*: Fix unused but set warnings
mutex: Fix annotations to include it in kernel-locking docbook
pid: make setpgid() system call use RCU read-side critical section
MAINTAINERS: Add RCU's public git tree
Check the argument name whether it is invalid (not C-like symbol name). This
makes event format simple.
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20100827113912.22882.62313.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set "argN" name for each argument automatically if it has no specified name.
Since dynamic trace event(kprobe_events) accepts special characters for its
argument, its format can show those special characters (e.g. '$', '%', '+').
However, perf can't parse those format because of the character (especially
'%') mess up the format. This sets "argX" name for those arguments if user
omitted the argument names.
E.g.
# echo 'p do_fork %ax IP=%ip $stack' > tracing/kprobe_events
# cat tracing/kprobe_events
p:kprobes/p_do_fork_0 do_fork arg1=%ax IP=%ip arg3=$stack
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20100827113906.22882.59312.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a memory leak which happens when a field name conflicts with others. In
error case, free_trace_probe() will free all arguments until nr_args, so this
increments nr_args the begining of the loop instead of the end.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20100827113846.22882.12670.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reading the file set_ftrace_filter does three things.
1) shows whether or not filters are set for the function tracer
2) shows what functions are set for the function tracer
3) shows what triggers are set on any functions
3 is independent from 1 and 2.
The way this file currently works is that it is a state machine,
and as you read it, it may change state. But this assumption breaks
when you use lseek() on the file. The state machine gets out of sync
and the t_show() may use the wrong pointer and cause a kernel oops.
Luckily, this will only kill the app that does the lseek, but the app
dies while holding a mutex. This prevents anyone else from using the
set_ftrace_filter file (or any other function tracing file for that matter).
A real fix for this is to rewrite the code, but that is too much for
a -rc release or stable. This patch simply disables llseek on the
set_ftrace_filter() file for now, and we can do the proper fix for the
next major release.
Reported-by: Robert Swiecki <swiecki@google.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Eugene Teo <eugene@redhat.com>
Cc: vendor-sec@lst.de
Cc: <stable@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
No real bugs I believe, just some dead code.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: andi@firstfloor.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
With a new enough GCC, ARM function tracing can be supported without the
need for frame pointers. This is essential for Thumb-2 support, since
frame pointers aren't available then.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
While discussing the strictness of the 80 character limit on the
Kernel Summit Discussion mailing list, I showed examples that I
broke that limit slightly with some algorithms. In discussing with
John Linville, what looked better, I realized that two of the
80 char breaking culprits were an identical expression.
As a clean up, this patch moves the identical expression into its
own helper function and that is used instead. As a side effect,
the offending code is now under the 80 character limit. :-)
This clean up code also changes the expression from
(A - B) - C to A - (B + C)
This makes the code look a little nicer too.
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
While we are reading trace_stat/functionX and someone just
disabled function_profile at that time, we can trigger this:
divide error: 0000 [#1] PREEMPT SMP
...
EIP is at function_stat_show+0x90/0x230
...
This fix just takes the ftrace_profile_lock and checks if
rec->counter is 0. If it's 0, we know the profile buffer
has been reset.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: stable@kernel.org
LKML-Reference: <4C723644.4040708@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Instead of hardcoding the number of contexts for the recursions
barriers, define a cpp constant to make the code more
self-explanatory.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Remove the nasty hack that marks a pointer's LSB to distinguish common
fields from event fields. Replace it with a more sane approach.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4C6A23C2.9020606@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Two new events were added that broke the current format output.
Both from the SCSI system: scsi_dispatch_cmd_done and scsi_dispatch_cmd_timeout
The reason is that their print_fmt exceeded a page size. Since the output
of the format used simple_read_from_buffer and trace_seq, it was limited
to a page size in output.
This patch converts the printing of the format of an event into seq_file,
which allows greater than a page size to be shown.
I diffed all event formats comparing the output with and without this
patch. All matched except for the above two, which showed just:
FORMAT TOO BIG
without this patch, but now properly displays the output with this patch.
v2: Remove updating *pos in seq start function.
[ Thanks to Li Zefan for pointing that out ]
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Kei Tokunaga <tokunaga.keiich@jp.fujitsu.com>
Cc: James Bottomley <James.Bottomley@suse.de>
Cc: Tomohiro Kusumi <kusumi.tomohiro@jp.fujitsu.com>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Secure discard is the same as discard except that all copies of the
discarded sectors (perhaps created by garbage collection) must also be
erased.
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ben Gardiner <bengardiner@nanometrics.ca>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
xen-blkfront: fix missing out label
blkdev: fix blkdev_issue_zeroout return value
block: update request stacking methods to support discards
block: fix missing export of blk_types.h
writeback: fix bad _bh spinlock nesting
drbd: revert "delay probes", feature is being re-implemented differently
drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
drbd: Disable delay probes for the upcomming release
writeback: cleanup bdi_register
writeback: add new tracepoints
writeback: remove unnecessary init_timer call
writeback: optimize periodic bdi thread wakeups
writeback: prevent unnecessary bdi threads wakeups
writeback: move bdi threads exiting logic to the forker thread
writeback: restructure bdi forker loop a little
writeback: move last_active to bdi
writeback: do not remove bdi from bdi_list
writeback: simplify bdi code a little
writeback: do not lose wake-ups in bdi threads
...
Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
drivers/scsi/scsi_error.c as per Jens.
* 'bkl/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
do_coredump: Do not take BKL
init: Remove the BKL from startup code
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (55 commits)
workqueue: mark init_workqueues() as early_initcall()
workqueue: explain for_each_*cwq_cpu() iterators
fscache: fix build on !CONFIG_SYSCTL
slow-work: kill it
gfs2: use workqueue instead of slow-work
drm: use workqueue instead of slow-work
cifs: use workqueue instead of slow-work
fscache: drop references to slow-work
fscache: convert operation to use workqueue instead of slow-work
fscache: convert object to use workqueue instead of slow-work
workqueue: fix how cpu number is stored in work->data
workqueue: fix mayday_mask handling on UP
workqueue: fix build problem on !CONFIG_SMP
workqueue: fix locking in retry path of maybe_create_worker()
async: use workqueue for worker pool
workqueue: remove WQ_SINGLE_CPU and use WQ_UNBOUND instead
workqueue: implement unbound workqueue
workqueue: prepare for WQ_UNBOUND implementation
libata: take advantage of cmwq and remove concurrency limitations
workqueue: fix worker management invocation without pending works
...
Fixed up conflicts in fs/cifs/* as per Tejun. Other trivial conflicts in
include/linux/workqueue.h, kernel/trace/Kconfig and kernel/workqueue.c
The blktrace driver currently needs the BKL, but
we should not need to take that in the block layer,
so just push it down into the driver itself.
It is quite likely that the BKL is not actually
required in blktrace code and could be removed
in a follow-on patch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Remove the current bio flags and reuse the request flags for the bio, too.
This allows to more easily trace the type of I/O from the filesystem
down to the block driver. There were two flags in the bio that were
missing in the requests: BIO_RW_UNPLUG and BIO_RW_AHEAD. Also I've
renamed two request flags that had a superflous RW in them.
Note that the flags are in bio.h despite having the REQ_ name - as
blkdev.h includes bio.h that is the only way to go for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Remove all the trivial wrappers for the cmd_type and cmd_flags fields in
struct requests. This allows much easier grepping for different request
types instead of unwinding through macros.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
um: Fix read_persistent_clock fallout
kgdb: Do not access xtime directly
powerpc: Clean up obsolete code relating to decrementer and timebase
powerpc: Rework VDSO gettimeofday to prevent time going backwards
clocksource: Add __clocksource_updatefreq_hz/khz methods
x86: Convert common clocksources to use clocksource_register_hz/khz
timekeeping: Make xtime and wall_to_monotonic static
hrtimer: Cleanup direct access to wall_to_monotonic
um: Convert to use read_persistent_clock
timkeeping: Fix update_vsyscall to provide wall_to_monotonic offset
powerpc: Cleanup xtime usage
powerpc: Simplify update_vsyscall
time: Kill off CONFIG_GENERIC_TIME
time: Implement timespec_add
x86: Fix vtime/file timestamp inconsistencies
Trivial conflicts in Documentation/feature-removal-schedule.txt
Much less trivial conflicts in arch/powerpc/kernel/time.c resolved as
per Thomas' earlier merge commit 47916be4e2 ("Merge branch
'powerpc.cherry-picks' into timers/clocksource")
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits)
sched: Use correct macro to display sched_child_runs_first in /proc/sched_debug
sched: No need for bootmem special cases
sched: Revert nohz_ratelimit() for now
sched: Reduce update_group_power() calls
sched: Update rq->clock for nohz balanced cpus
sched: Fix spelling of sibling
sched, cpuset: Drop __cpuexit from cpu hotplug callbacks
sched: Fix the racy usage of thread_group_cputimer() in fastpath_timer_check()
sched: run_posix_cpu_timers: Don't check ->exit_state, use lock_task_sighand()
sched: thread_group_cputime: Simplify, document the "alive" check
sched: Remove the obsolete exit_state/signal hacks
sched: task_tick_rt: Remove the obsolete ->signal != NULL check
sched: __sched_setscheduler: Read the RLIMIT_RTPRIO value lockless
sched: Fix comments to make them DocBook happy
sched: Fix fix_small_capacity
powerpc: Exclude arch_sd_sibiling_asym_packing() on UP
powerpc: Enable asymmetric SMT scheduling on POWER7
sched: Add asymmetric group packing option for sibling domain
sched: Fix capacity calculations for SMT4
sched: Change nohz idle load balancing logic to push model
...
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits)
tracing/kprobes: unregister_trace_probe needs to be called under mutex
perf: expose event__process function
perf events: Fix mmap offset determination
perf, powerpc: fsl_emb: Restore setting perf_sample_data.period
perf, powerpc: Convert the FSL driver to use local64_t
perf tools: Don't keep unreferenced maps when unmaps are detected
perf session: Invalidate last_match when removing threads from rb_tree
perf session: Free the ref_reloc_sym memory at the right place
x86,mmiotrace: Add support for tracing STOS instruction
perf, sched migration: Librarize task states and event headers helpers
perf, sched migration: Librarize the GUI class
perf, sched migration: Make the GUI class client agnostic
perf, sched migration: Make it vertically scrollable
perf, sched migration: Parameterize cpu height and spacing
perf, sched migration: Fix key bindings
perf, sched migration: Ignore unhandled task states
perf, sched migration: Handle ignored migrate out events
perf: New migration tool overview
tracing: Drop cpparg() macro
perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
...
Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
With CONFIG_DEBUG_PAGEALLOC, I observed an unallocated memory access in
function_graph trace. It appears we find a small size entry in ring buffer,
but we access it as a big size entry. The access overflows the page size
and touches an unallocated page.
Cc: <stable@kernel.org>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
LKML-Reference: <1280217994.32400.76.camel@sli10-desk.sh.intel.com>
[ Added a comment to explain the problem - SDR ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In systems with more than one processor it is desirable to look at the
per cpu trace buffers.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
Add in a helper function to allow the kdb shell to dump the ftrace
buffer.
Modify trace.c to expose the capability to iterate over the ftrace
buffer in a read only capacity.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
Comment in unregister_trace_probe() says probe_lock will be held when it
gets called. However there is a case where it might called without the
probe_lock being held. Also since we are traversing the probe_list and
deleting an element from the probe_list, probe_lock should be held.
This was first pointed in uprobes traceevent review by Frederic
Weisbecker here. (http://lkml.org/lkml/2010/5/12/106)
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100630084548.GA10325@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use synchronize_sched() to ensure a tracepoint won't be called
while/after we release the perf buffers it references.
But the tracepoint API has its own API for that:
tracepoint_synchronize_unregister(). Use it instead as it's
self-explanatory and eases maintainance.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Now that all arches have been converted over to use generic time via
clocksources or arch_gettimeoffset(), we can remove the GENERIC_TIME
config option and simplify the generic code.
Signed-off-by: John Stultz <johnstul@us.ibm.com>
LKML-Reference: <1279068988-21864-4-git-send-email-johnstul@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We need to add one to the strlen() return because of the NULL
character. The type->name here generally comes from the kernel and I
don't think any of them come close to being MAX_TRACER_SIZE (100)
characters long so this is basically a cleanup.
Signed-off-by: Dan Carpenter <error27@gmail.com>
LKML-Reference: <20100710100644.GV19184@bicker>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Documentation/trace/ftrace.txt says
buffer_size_kb:
This sets or displays the number of kilobytes each CPU
buffer can hold. The tracer buffers are the same size
for each CPU. The displayed number is the size of the
CPU buffer and not total size of all buffers. The
trace buffers are allocated in pages (blocks of memory
that the kernel uses for allocation, usually 4 KB in size).
If the last page allocated has room for more bytes
than requested, the rest of the page will be used,
making the actual allocation bigger than requested.
( Note, the size may not be a multiple of the page size
due to buffer management overhead. )
This can only be updated when the current_tracer
is set to "nop".
But it's incorrect. currently total memory consumption is
'buffer_size_kb x CPUs x 2'.
Why two times difference is there? because ftrace implicitly allocate
the buffer for max latency too.
That makes sad result when admin want to use large buffer. (If admin
want full logging and makes detail analysis). example, If admin
have 24 CPUs machine and write 200MB to buffer_size_kb, the system
consume ~10GB memory (200MB x 24 x 2). umm.. 5GB memory waste is
usually unacceptable.
Fortunatelly, almost all users don't use max latency feature.
The max latency buffer can be disabled easily.
This patch shrink buffer size of the max latency buffer if
unnecessary.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
LKML-Reference: <20100701104554.DA2D.A69D9226@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
__print_flags() and __print_symbolic() use percpu trace_seq:
1) Its memory is allocated at compile time, it wastes memory if we don't use tracing.
2) It is percpu data and it wastes more memory for multi-cpus system.
3) It disables preemption when it executes its core routine
"trace_seq_printf(s, "%s: ", #call);" and introduces latency.
So we move this trace_seq to struct trace_iterator.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4C078350.7090106@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Reorder structure to remove 8 bytes of padding on 64 bit builds.
This shrinks the size to 128 bytes so allowing allocation from a smaller
slab & needed one fewer cache lines.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
LKML-Reference: <1269516456.2054.8.camel@localhost>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We found that even enabling a single trace event that will rarely be
triggered can add big overhead to context switch.
(lmbench context switch test)
-------------------------------------------------
2p/0K 2p/16K 2p/64K 8p/16K 8p/64K 16p/16K 16p/64K
ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw ctxsw
------ ------ ------ ------ ------ ------- -------
2.19 2.3 2.21 2.56 2.13 2.54 2.07
2.39 2.51 2.35 2.75 2.27 2.81 2.24
The overhead is 6% ~ 11%.
It's because when a trace event is enabled 3 tracepoints (sched_switch,
sched_wakeup, sched_wakeup_new) will be activated to map pid to cmdname.
We'd like to avoid this overhead, so add a trace option '(no)record-cmd'
to allow to disable cmdline recording.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4C2D57F4.2050204@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The default for llseek will change to no_llseek,
so the tracing debugfs files need to add explicit
.llseek assignments. Since we're dealing with regular
files from a VFS perspective, use generic_file_llseek.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: John Kacur <jkacur@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1278538820-1392-10-git-send-email-arnd@arndb.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Special traces type was only used by sysprof. Lets remove it now
that sysprof ftrace plugin has been dropped.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Soeren Sandmann <sandmann@daimi.au.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
The sysprof ftrace plugin doesn't seem to be seriously used
somewhere. There is a branch in the sysprof tree that makes
an interface to it, but the real sysprof tool uses either its
own module or perf events.
Drop the sysprof ftrace plugin then, as it's mostly useless.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Soeren Sandmann <sandmann@daimi.au.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
The ksym (breakpoint) ftrace plugin has been superseded by perf
tools that are much more poweful to use the cpu breakpoints.
This tracer doesn't bring more feature. It has been deprecated
for a while now, lets remove it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
I have shown by code review that no driver takes
the BKL at init time any more, so whatever the
init code was locking against is no longer there
and it is now safe to remove the BKL there.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Steven Rostedt <rostedt@goodmis>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Support string type tracing and printing in kprobe-tracer.
This allows user to trace string data in kernel including __user data. Note
that sometimes __user data may not be accessed if it is paged-out (sorry, but
kprobes operation should be done in atomic, we can not wait for page-in).
Commiter note: Fixed up conflicts with b7e2ece.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100519195724.2885.18788.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Strip tracing code from workqueue and remove workqueue tracing. This
is temporary measure till concurrency managed workqueue is complete.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Because kprobes and syscalls need special processing to register
events, the class->reg() method was created to handle the differences.
But instead of creating a default ->reg for perf and ftrace events,
the code was scattered with:
if (class->reg)
class->reg();
else
default_reg();
This is messy and can also lead to bugs.
This patch cleans up this code and creates a default reg() entry for
the events allowing for the code to directly call the class->reg()
without the condition.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The nsecs_str string is a local variable defined as:
char nsecs_str[5];
It is possible for the snprintf call to use a size value larger than the
size of the string. This should not cause a buffer overrun as it is
written now due to the value for the string format "%03lu" can not be
larger than 1000. However, this change makes it correct. By making the
size correct we guard against potential future changes that could actually
cause a buffer overrun.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
LKML-Reference: <1276619355-18116-1-git-send-email-chase.douglas@canonical.com>
[ added 'UL' to number 8 to fix gcc warning comparing it to sizeof() ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Let trace_module_add_events() and event_trace_init() call
__trace_add_event_call().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BFA37E9.1020106@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
raw_init callback is optional.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BFA37D4.7070500@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every event (or event class) has it's define_fields callback,
so the test is redundant.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BFA37BC.8080707@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every event has the same common fields, so it's a big waste of
memory to have a copy of those fields for every event.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BFA3759.30105@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
All syscall exit events have the same fields.
The kernel size drops 2.5K:
text data bss dec hex filename
7018612 2034376 7251132 16304120 f8c7f8 vmlinux.o.orig
7018612 2031888 7251132 16301632 f8be40 vmlinux.o
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BFA3746.8070100@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the addition of the code to shrink the kernel tracepoint
infrastructure, we lost kprobes being traced by perf. The reason
is that I tested if the "tp_event->class->perf_probe" existed before
enabling it. This prevents "ftrace only" events (like the function
trace events) from being enabled by perf.
Unfortunately, kprobe events do not use perf_probe. This causes
kprobes to be missed by perf. To fix this, we add the test to
see if "tp_event->class->reg" exists as well as perf_probe.
Normal trace events have only "perf_probe" but no "reg" function,
and kprobes and syscalls have the "reg" but no "perf_probe".
The ftrace unique events do not have either, so this is a valid
test. If a kprobe or syscall is not to be probed by perf, the
"reg" function is called anyway, and will return a failure and
prevent perf from probing it.
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We have been resisting new ftrace plugins and removing existing
ones, and kmemtrace has been superseded by kmem trace events
and perf-kmem, so we remove it.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
[ remove kmemtrace from the makefile, handle slob too ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
For people who otherwise get to write: cpu_clock(smp_processor_id()),
there is now: local_clock().
Also, as per suggestion from Andrew, provide some documentation on
the various clock interfaces, and minimize the unsigned long long vs
u64 mess.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jens Axboe <jaxboe@fusionio.com>
LKML-Reference: <1275052414.1645.52.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The boot tracer is useless. It simply logs the initcalls
but in fact these initcalls are also logged through printk
while using the initcall_debug kernel parameter.
Nobody seem to be using it so far. Then just remove it.
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <20100526105753.GA5677@cr0.nay.redhat.com>
[ remove the hooks in main.c, and the headers ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Drop this argument now that we always want to rewind only to the
state of the first caller.
It means frame pointers are not necessary anymore to reliably get
the source of an event. But this also means we need this helper
to be a macro now, as an inline function is not an option since
we need to know when to provide a default implentation.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
arch/x86/include/asm/stacktrace.h and arch/x86/kernel/dumpstack.h
declare headers of objects that deal with the same topic.
Actually most of the files that include stacktrace.h also include
dumpstack.h
Although dumpstack.h seems more reserved for internals of stack
traces, those are quite often needed to define specialized stack
trace operations. And perf event arch headers are going to need
access to such low level operations anyway. So don't continue to
bother with dumpstack.h as it's not anymore about isolated deep
internals.
v2: fix struct stack_frame definition conflict in sysprof
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Soeren Sandmann <sandmann@daimi.au.dk>
The ftrace_preempt_disable/enable functions were to address a
recursive race caused by the function tracer. The function tracer
traces all functions which makes it easily susceptible to recursion.
One area was preempt_enable(). This would call the scheduler and
the schedulre would call the function tracer and loop.
(So was it thought).
The ftrace_preempt_disable/enable was made to protect against recursion
inside the scheduler by storing the NEED_RESCHED flag. If it was
set before the ftrace_preempt_disable() it would not call schedule
on ftrace_preempt_enable(), thinking that if it was set before then
it would have already scheduled unless it was already in the scheduler.
This worked fine except in the case of SMP, where another task would set
the NEED_RESCHED flag for a task on another CPU, and then kick off an
IPI to trigger it. This could cause the NEED_RESCHED to be saved at
ftrace_preempt_disable() but the IPI to arrive in the the preempt
disabled section. The ftrace_preempt_enable() would not call the scheduler
because the flag was already set before entring the section.
This bug would cause a missed preemption check and cause lower latencies.
Investigating further, I found that the recusion caused by the function
tracer was not due to schedule(), but due to preempt_schedule(). Now
that preempt_schedule is completely annotated with notrace, the recusion
no longer is an issue.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix blktrace.c kernel-doc warnings:
Warning(kernel/trace/blktrace.c:858): No description found for parameter 'ignore'
Warning(kernel/trace/blktrace.c:890): No description found for parameter 'ignore'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100529114507.c466fc1e.randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Steve spotted I forgot to do the destroy under event_mutex.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1274451913.1674.1707.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
tracepoint_probe_unregister() does not synchronize against the probe
callbacks, so do that explicitly. This properly serializes the callbacks
and the free of the data used therein.
Also, use this_cpu_ptr() where possible.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1274438476.1674.1702.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf tui: Fix last use_browser problem related to .perfconfig
perf symbols: Add the build id cache to the vmlinux path
perf tui: Reset use_browser if stdout is not a tty
ring-buffer: Move zeroing out excess in page to ring buffer code
ring-buffer: Reset "real_end" when page is filled
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (61 commits)
tracing: Add __used annotation to event variable
perf, trace: Fix !x86 build bug
perf report: Support multiple events on the TUI
perf annotate: Fix up usage of the build id cache
x86/mmiotrace: Remove redundant instruction prefix checks
perf annotate: Add TUI interface
perf tui: Remove annotate from popup menu after failure
perf report: Don't start the TUI if -D is used
perf: Fix getline undeclared
perf: Optimize perf_tp_event_match()
perf: Remove more code from the fastpath
perf: Optimize the !vmalloc backed buffer
perf: Optimize perf_output_copy()
perf: Fix wakeup storm for RO mmap()s
perf-record: Share per-cpu buffers
perf-record: Remove -M
perf: Ensure that IOC_OUTPUT isn't used to create multi-writer buffers
perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to track events
perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction
perf tui: Allow disabling the TUI on a per command basis in ~/.perfconfig
...
Currently the trace splice code zeros out the excess bytes in the page before
sending it off to userspace.
This is to make sure userspace is not getting anything it should not be
when reading the pages, because the excess data was never initialized
to zero before writing (for perfomance reasons).
But the splice code has no business in doing this work, it should be
done by the ring buffer. With the latest changes for recording lost
events, the splice code gets it wrong anyway.
Move the zeroing out of excess bytes into the ring buffer code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The code to store the "lost events" requires knowing the real end
of the page. Since the 'commit' includes the padding at the end of
a page a "real_end" variable was used to keep track of the end not
including the padding.
If events were lost, the reader can place the count of events in
the padded area if there is enough room.
The bug this patch fixes is that when we fill the page we do not
reset the real_end variable, and if the writer had wrapped a few
times, the real_end would be incorrect.
This patch simply resets the real_end if the page was filled.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Patch b7e2ecef92 (perf, trace: Optimize tracepoints by removing
IRQ-disable from perf/tracepoint interaction) made the
unfortunate mistake of assuming the world is x86 only, correct
this.
The problem was that perf_fetch_caller_regs() did
local_save_flags() into regs->flags, and I re-used that to
remove another local_save_flags(), forgetting !x86 doesn't have
regs->flags.
Do the reverse, remove the local_save_flags() from
perf_fetch_caller_regs() and let the ftrace site do the
local_save_flags() instead.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: acme@redhat.com
Cc: efault@gmx.de
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
LKML-Reference: <1274778175.5882.623.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds F_GETPIPE_SZ and F_SETPIPE_SZ fcntl() actions for
growing and shrinking the size of a pipe and adjusts pipe.c and splice.c
(and relay and network splice) usage to work with these larger (or smaller)
pipes.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (182 commits)
[SCSI] aacraid: add an ifdef'd device delete case instead of taking the device offline
[SCSI] aacraid: prohibit access to array container space
[SCSI] aacraid: add support for handling ATA pass-through commands.
[SCSI] aacraid: expose physical devices for models with newer firmware
[SCSI] aacraid: respond automatically to volumes added by config tool
[SCSI] fcoe: fix fcoe module ref counting
[SCSI] libfcoe: FIP Keep-Alive messages for VPorts are sent with incorrect port_id and wwn
[SCSI] libfcoe: Fix incorrect MAC address clearing
[SCSI] fcoe: fix a circular locking issue with rtnl and sysfs mutex
[SCSI] libfc: Move the port_id into lport
[SCSI] fcoe: move link speed checking into its own routine
[SCSI] libfc: Remove extra pointer check
[SCSI] libfc: Remove unused fc_get_host_port_type
[SCSI] fcoe: fixes wrong error exit in fcoe_create
[SCSI] libfc: set seq_id for incoming sequence
[SCSI] qla2xxx: Updates to ISP82xx support.
[SCSI] qla2xxx: Optionally disable target reset.
[SCSI] qla2xxx: ensure flash operation and host reset via sg_reset are mutually exclusive
[SCSI] qla2xxx: Silence bogus warning by gcc for wrap and did.
[SCSI] qla2xxx: T10 DIF support added.
...
Avoid the swevent hash-table by using per-tracepoint
hlists.
Also, avoid conditionals on the fast path by ordering
with probe unregister so that we should never get on
the callback path without the data being there.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100521090710.473188012@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we've got but a single event per tracepoint
there is no reason to try and multiplex it so don't.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Fix "integer as NULL pointer" warning.
tracing: Fix tracepoint.h DECLARE_TRACE() to allow more than one header
tracing: Make the documentation clear on trace_event boot option
ring-buffer: Wrap open-coded WARN_ONCE
tracing: Convert nop macros to static inlines
tracing: Fix sleep time function profiling
tracing: Show sample std dev in function profiling
tracing: Add documentation for trace commands mod, traceon/traceoff
ring-buffer: Make benchmark handle missed events
ring-buffer: Make non-consuming read less expensive with lots of cpus.
tracing: Add graph output support for irqsoff tracer
tracing: Have graph flags passed in to ouput functions
tracing: Add ftrace events for graph tracer
tracing: Dump either the oops's cpu source or all cpus buffers
tracing: Fix uninitialized variable of tracing/trace output
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (49 commits)
stop_machine: Move local variable closer to the usage site in cpu_stop_cpu_callback()
sched, wait: Use wrapper functions
sched: Remove a stale comment
ondemand: Make the iowait-is-busy time a sysfs tunable
ondemand: Solve a big performance issue by counting IOWAIT time as busy
sched: Intoduce get_cpu_iowait_time_us()
sched: Eliminate the ts->idle_lastupdate field
sched: Fold updating of the last_update_time_info into update_ts_time_stats()
sched: Update the idle statistics in get_cpu_idle_time_us()
sched: Introduce a function to update the idle statistics
sched: Add a comment to get_cpu_idle_time_us()
cpu_stop: add dummy implementation for UP
sched: Remove rq argument to the tracepoints
rcu: need barrier() in UP synchronize_sched_expedited()
sched: correctly place paranioa memory barriers in synchronize_sched_expedited()
sched: kill paranoia check in synchronize_sched_expedited()
sched: replace migration_thread with cpu_stop
stop_machine: reimplement using cpu_stop
cpu_stop: implement stop_cpu[s]()
sched: Fix select_idle_sibling() logic in select_task_rq_fair()
...
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (311 commits)
perf tools: Add mode to build without newt support
perf symbols: symbol inconsistency message should be done only at verbose=1
perf tui: Add explicit -lslang option
perf options: Type check all the remaining OPT_ variants
perf options: Type check OPT_BOOLEAN and fix the offenders
perf options: Check v type in OPT_U?INTEGER
perf options: Introduce OPT_UINTEGER
perf tui: Add workaround for slang < 2.1.4
perf record: Fix bug mismatch with -c option definition
perf options: Introduce OPT_U64
perf tui: Add help window to show key associations
perf tui: Make <- exit menus too
perf newt: Add single key shortcuts for zoom into DSO and threads
perf newt: Exit browser unconditionally when CTRL+C, q or Q is pressed
perf newt: Fix the 'A'/'a' shortcut for annotate
perf newt: Make <- exit the ui_browser
x86, perf: P4 PMU - fix counters management logic
perf newt: Make <- zoom out filters
perf report: Report number of events, not samples
perf hist: Clarify events_stats fields usage
...
Fix up trivial conflicts in kernel/fork.c and tools/perf/builtin-record.c
ftrace_trace_stack() and frace_trace_userstacke() take a
struct ring_buffer argument, not struct trace_array. Commit
e77405ad("tracing: pass around ring buffer instead of tracer")
made this change.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BE77C14.5010806@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The filter_active and enable both use an int (4 bytes each) to
set a single flag. We can save 4 bytes per event by combining the
two into a single integer.
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4894944 1018052 861512 6774508 675eec vmlinux.id
4894871 1012292 861512 6768675 674823 vmlinux.flags
This gives us another 5K in savings.
The modification of both the enable and filter fields are done
under the event_mutex, so it is still safe to combine the two.
Note: Although Mathieu gave his Acked-by, he would like it documented
that the reads of flags are not protected by the mutex. The way the
code works, these reads will not break anything, but will have a
residual effect. Since this behavior is the same even before this
patch, describing this situation is left to another patch, as this
patch does not change the behavior, but just brought it to Mathieu's
attention.
v2: Updated the event trace self test to for this change.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that the trace_event structure is embedded in the ftrace_event_call
structure, there is no need for the ftrace_event_call id field.
The id field is the same as the trace_event type field.
Removing the id and re-arranging the structure brings down the tracepoint
footprint by another 5K.
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
48950241023812 861512 6780348 6775bc vmlinux.print
4894944 1018052 861512 6774508 675eec vmlinux.id
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, every event has its own trace_event structure. This is
fine since the structure is needed anyway. But the print function
structure (trace_event_functions) is now separate. Since the output
of the trace event is done by the class (with the exception of events
defined by DEFINE_EVENT_PRINT), it makes sense to have the class
define the print functions that all events in the class can use.
This makes a bigger deal with the syscall events since all syscall events
use the same class. The savings here is another 30K.
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4900382 1048964 861512 6810858 67ecea vmlinux.init
4900446 1049028 861512 6810986 67ed6a vmlinux.preprint
48950241023812 861512 6780348 6775bc vmlinux.print
To accomplish this, and to let the class know what event is being
printed, the event structure is embedded in the ftrace_event_call
structure. This should not be an issues since the event structure
was created for each event anyway.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Multiple events may use the same method to print their data.
Instead of having all events have a pointer to their print funtions,
the trace_event structure now points to a trace_event_functions structure
that will hold the way to print ouf the event.
The event itself is now passed to the print function to let the print
function know what kind of event it should print.
This opens the door to consolidating the way several events print
their output.
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4900382 1048964 861512 6810858 67ecea vmlinux.init
4900446 1049028 861512 6810986 67ed6a vmlinux.preprint
This change slightly increases the size but is needed for the next change.
v3: Fix the branch tracer events to handle this change.
v2: Fix the new function graph tracer event calls to handle this change.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The raw_init function pointer in the event is used to initialize
various kinds of events. The type of initialization needed is usually
classed to the kind of event it is.
Two events with the same class will always have the same initialization
function, so it makes sense to move this to the class structure.
Perhaps even making a special system structure would work since
the initialization is the same for all events within a system.
But since there's no system structure (yet), this will just move it
to the class.
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4900375 1053380 861512 6815267 67fe23 vmlinux.fields
4900382 1048964 861512 6810858 67ecea vmlinux.init
The text grew very slightly, but this is a constant growth that happened
with the changing of the C files that call the init code.
The bigger savings is the data which will be saved the more events share
a class.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move the defined fields from the event to the class structure.
Since the fields of the event are defined by the class they belong
to, it makes sense to have the class hold the information instead
of the individual events. The events of the same class would just
hold duplicate information.
After this change the size of the kernel dropped another 3K:
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4900252 1057412 861512 6819176 680d68 vmlinux.regs
4900375 1053380 861512 6815267 67fe23 vmlinux.fields
Although the text increased, this was mainly due to the C files
having to adapt to the change. This is a constant increase, where
new tracepoints will not increase the Text. But the big drop is
in the data size (as well as needed allocations to hold the fields).
This will give even more savings as more tracepoints are created.
Note, if just TRACE_EVENT()s are used and not DECLARE_EVENT_CLASS()
with several DEFINE_EVENT()s, then the savings will be lost. But
we are pushing developers to consolidate events with DEFINE_EVENT()
so this should not be an issue.
The kprobes define a unique class to every new event, but are dynamic
so it should not be a issue.
The syscalls however have a single class but the fields for the individual
events are different. The syscalls use a metadata to define the
fields. I moved the fields list from the event to the metadata and
added a "get_fields()" function to the class. This function is used
to find the fields. For normal events and kprobes, get_fields() just
returns a pointer to the fields list_head in the class. For syscall
events, it returns the fields list_head in the metadata for the event.
v2: Fixed the syscall fields. The syscall metadata needs a list
of fields for both enter and exit.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch removes the register functions of TRACE_EVENT() to enable
and disable tracepoints. The registering of a event is now down
directly in the trace_events.c file. The tracepoint_probe_register()
is now called directly.
The prototypes are no longer type checked, but this should not be
an issue since the tracepoints are created automatically by the
macros. If a prototype is incorrect in the TRACE_EVENT() macro, then
other macros will catch it.
The trace_event_class structure now holds the probes to be called
by the callbacks. This removes needing to have each event have
a separate pointer for the probe.
To handle kprobes and syscalls, since they register probes in a
different manner, a "reg" field is added to the ftrace_event_class
structure. If the "reg" field is assigned, then it will be called for
enabling and disabling of the probe for either ftrace or perf. To let
the reg function know what is happening, a new enum (trace_reg) is
created that has the type of control that is needed.
With this new rework, the 82 kernel events and 618 syscall events
has their footprint dramatically lowered:
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4914025 1088868 861512 6864405 68be15 vmlinux.class
4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint
4900252 1057412 861512 6819176 680d68 vmlinux.regs
The size went from 6863829 to 6819176, that's a total of 44K
in savings. With tracepoints being continuously added, this is
critical that the footprint becomes minimal.
v5: Added #ifdef CONFIG_PERF_EVENTS around a reference to perf
specific structure in trace_events.c.
v4: Fixed trace self tests to check probe because regfunc no longer
exists.
v3: Updated to handle void *data in beginning of probe parameters.
Also added the tracepoint: check_trace_callback_type_##call().
v2: Changed the callback probes to pass void * and typecast the
value within the function.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds data to be passed to tracepoint callbacks.
The created functions from DECLARE_TRACE() now need a mandatory data
parameter. For example:
DECLARE_TRACE(mytracepoint, int value, value)
Will create the register function:
int register_trace_mytracepoint((void(*)(void *data, int value))probe,
void *data);
As the first argument, all callbacks (probes) must take a (void *data)
parameter. So a callback for the above tracepoint will look like:
void myprobe(void *data, int value)
{
}
The callback may choose to ignore the data parameter.
This change allows callbacks to register a private data pointer along
with the function probe.
void mycallback(void *data, int value);
register_trace_mytracepoint(mycallback, mydata);
Then the mycallback() will receive the "mydata" as the first parameter
before the args.
A more detailed example:
DECLARE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));
/* In the C file */
DEFINE_TRACE(mytracepoint, TP_PROTO(int status), TP_ARGS(status));
[...]
trace_mytracepoint(status);
/* In a file registering this tracepoint */
int my_callback(void *data, int status)
{
struct my_struct my_data = data;
[...]
}
[...]
my_data = kmalloc(sizeof(*my_data), GFP_KERNEL);
init_my_data(my_data);
register_trace_mytracepoint(my_callback, my_data);
The same callback can also be registered to the same tracepoint as long
as the data registered is different. Note, the data must also be used
to unregister the callback:
unregister_trace_mytracepoint(my_callback, my_data);
Because of the data parameter, tracepoints declared this way can not have
no args. That is:
DECLARE_TRACE(mytracepoint, TP_PROTO(void), TP_ARGS());
will cause an error.
If no arguments are needed, a new macro can be used instead:
DECLARE_TRACE_NOARGS(mytracepoint);
Since there are no arguments, the proto and args fields are left out.
This is part of a series to make the tracepoint footprint smaller:
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4914025 1088868 861512 6864405 68be15 vmlinux.class
4918492 1084612 861512 6864616 68bee8 vmlinux.tracepoint
Again, this patch also increases the size of the kernel, but
lays the ground work for decreasing it.
v5: Fixed net/core/drop_monitor.c to handle these updates.
v4: Moved the DECLARE_TRACE() DECLARE_TRACE_NOARGS out of the
#ifdef CONFIG_TRACE_POINTS, since the two are the same in both
cases. The __DECLARE_TRACE() is what changes.
Thanks to Frederic Weisbecker for pointing this out.
v3: Made all register_* functions require data to be passed and
all callbacks to take a void * parameter as its first argument.
This makes the calling functions comply with C standards.
Also added more comments to the modifications of DECLARE_TRACE().
v2: Made the DECLARE_TRACE() have the ability to pass arguments
and added a new DECLARE_TRACE_NOARGS() for tracepoints that
do not need any arguments.
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch creates a ftrace_event_class struct that event structs point to.
This class struct will be made to hold information to modify the
events. Currently the class struct only holds the events system name.
This patch slightly increases the size, but this change lays the ground work
of other changes to make the footprint of tracepoints smaller.
With 82 standard tracepoints, and 618 system call tracepoints
(two tracepoints per syscall: enter and exit):
text data bss dec hex filename
4913961 1088356 861512 6863829 68bbd5 vmlinux.orig
4914025 1088868 861512 6864405 68be15 vmlinux.class
This patch also cleans up some stale comments in ftrace.h.
v2: Fixed missing semi-colon in macro.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
struct rq isn't visible outside of sched.o so its near useless to
expose the pointer, also there are no users of it, so remove it.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1272997616.1642.207.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The original code doesn't work because "call" is never NULL there.
Signed-off-by: Dan Carpenter <error27@gmail.com>
LKML-Reference: <20100320143911.GF5331@bicker>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The breakpoint generic layer assumes that archs always know in advance
the static number of address registers available to host breakpoints
through the HBP_NUM macro.
However this is not true for every archs. For example Arm needs to get
this information dynamically to handle the compatiblity between
different versions.
To solve this, this patch proposes to drop the static HBP_NUM macro
and let the arch provide the number of available slots through a
new hw_breakpoint_slots() function. For archs that have
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS selected, it will be called once
as the number of registers fits for instruction and data breakpoints
together.
For the others it will be called first to get the number of
instruction breakpoint registers and another time to get the
data breakpoint registers, the targeted type is given as a
parameter of hw_breakpoint_slots().
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Ingo Molnar <mingo@elte.hu>
__print_hex() prints values in an array in hex (w/o '0x') (space separated)
EX) 92 33 32 f3 ee 4d
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@jp.fujitsu.com>
Signed-off-by: Kei Tokunaga <tokunaga.keiich@jp.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
When sleep_time is off the function profiler ignores the time that a task
is scheduled out. When the task is scheduled out a timestamp is taken.
When the task is scheduled back in, the timestamp is compared to the
current time and the saved calltimes are adjusted accordingly.
But when stopping the function profiler, the sched switch hook that
does this adjustment was stopped before shutting down the tracer.
This allowed some tasks to not get their timestamps set when they
scheduled out. When the function profiler started again, this would
skew the times of the scheduler functions.
This patch moves the stopping of the sched switch to after the function
profiler is stopped. It also ignores zero set calltimes, which may
happen on start up.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When combined with function graph tracing the ftrace function profiler
also prints the average run time of functions. While this gives us some
good information, it doesn't tell us anything about the variance of the
run times of the function. This change prints out the s^2 sample
standard deviation alongside the average.
This change adds one entry to the profile record structure. This
increases the memory footprint of the function profiler by 1/3 on a
32-bit system, and by 1/5 on a 64-bit system when function graphing is
enabled, though the memory is only allocated when the profiler is turned
on. During the profiling, one extra line of code adds the squared
calltime to the new record entry, so this should not adversly affect
performance.
Note that the square of the sample standard deviation is printed because
there is no sqrt implementation for unsigned long long in the kernel.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
LKML-Reference: <1272304925-2436-1-git-send-email-chase.douglas@canonical.com>
[ fixed comment about ns^2 -> us^2 conversion ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the addition of the "missed events" flags that is stored in the
commit field of the ring buffer page, the ring_buffer_benchmark
was not updated to handle this. If events are missed, then the
missed events flag is set in the ring buffer page, the benchmark
will count that flag as part of the size of the page and will hit the BUG()
when it tries to read beyond the page.
The solution is simply to have the ring buffer benchmark mask off
the extra bits.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When performing a non-consuming read, a synchronize_sched() is
performed once for every cpu which is actively tracing.
This is very expensive, and can make it take several seconds to open
up the 'trace' file with lots of cpus.
Only one synchronize_sched() call is actually necessary. What is
desired is for all cpus to see the disabling state change. So we
transform the existing sequence:
for_each_cpu() {
ring_buffer_read_start();
}
where each ring_buffer_start() call performs a synchronize_sched(),
into the following:
for_each_cpu() {
ring_buffer_read_prepare();
}
ring_buffer_read_prepare_sync();
for_each_cpu() {
ring_buffer_read_start();
}
wherein only the single ring_buffer_read_prepare_sync() call needs to
do the synchronize_sched().
The first phase, via ring_buffer_read_prepare(), allocates the 'iter'
memory and increments ->record_disabled.
In the second phase, ring_buffer_read_prepare_sync() makes sure this
->record_disabled state is visible fully to all cpus.
And in the final third phase, the ring_buffer_read_start() calls reset
the 'iter' objects allocated in the first phase since we now know that
none of the cpus are adding trace entries any more.
This makes openning the 'trace' file nearly instantaneous on a
sparc64 Niagara2 box with 128 cpus tracing.
Signed-off-by: David S. Miller <davem@davemloft.net>
LKML-Reference: <20100420.154711.11246950.davem@davemloft.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add function graph output to irqsoff tracer.
The graph output is enabled by setting new 'display-graph' trace option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1270227683-14631-4-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Let the function graph tracer have custom flags passed to its
output functions.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1270227683-14631-3-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add ftrace events for graph tracer, so the graph output could be shared
with other tracers.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1270227683-14631-2-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace_dump_on_oops kernel parameter, sysctl and sysrq let one
dump every cpu buffers when an oops or panic happens.
It's nice when you have few cpus but it may take ages if have many,
plus you miss the real origin of the problem in all the cpu traces.
Sometimes, all you need is to dump the cpu buffer that triggered the
opps, most of the time it is our main interest.
This patch modifies ftrace_dump_on_oops to handle this choice.
The ftrace_dump_on_oops kernel parameter, when it comes alone, has
the same behaviour than before. But ftrace_dump_on_oops=orig_cpu
will only dump the buffer of the cpu that oops'ed.
Similarly, sysctl kernel.ftrace_dump_on_oops=1 and
echo 1 > /proc/sys/kernel/ftrace_dump_on_oops keep their previous
behaviour. But setting 2 jumps into cpu origin dump mode.
v2: Fix double setup
v3: Fix spelling issues reported by Randy Dunlap
v4: Also update __ftrace_dump in the selftests
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Support basic types of integer (u8, u16, u32, u64, s8, s16, s32, s64) in
kprobe tracer. With this patch, users can specify above basic types on
each arguments after ':'. If omitted, the argument type is set as
unsigned long (u32 or u64, arch-dependent).
e.g.
echo 'p account_system_time+0 hardirq_offset=%si:s32' > kprobe_events
adds a probe recording hardirq_offset in signed-32bits value on the
entry of account_system_time.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100412171708.3790.18599.stgit@localhost6.localdomain6>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because a local variable is not initialized, I got these
when I did 'cat tracing/trace'. (not trace_pipe):
CPU:0 [LOST 18446744071579453134 EVENTS]
ps-3099 [000] 560.770221: lock_acquire: ffff880030865010 &(&dentry->d_lock)->rlock
CPU:0 [LOST 18446744071579453134 EVENTS]
ps-3099 [000] 560.770221: lock_release: ffff880030865010 &(&dentry->d_lock)->rlock
CPU:0 [LOST 18446612133255294080 EVENTS]
ps-3099 [000] 560.770221: lock_acquire: ffff880030865010 &(&dentry->d_lock)->rlock
CPU:0 [LOST 18446744071579453134 EVENTS]
ps-3099 [000] 560.770222: lock_release: ffff880030865010 &(&dentry->d_lock)->rlock
CPU:0 [LOST 18446744071579453134 EVENTS]
ps-3099 [000] 560.770222: lock_release: ffffffff816cfb98 dcache_lock
See peek_next_entry(), it does not set *lost_events when we 'cat tracing/trace'
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4BB9A929.2000303@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf: Always build the powerpc perf_arch_fetch_caller_regs version
perf: Always build the stub perf_arch_fetch_caller_regs version
perf, probe-finder: Build fix on Debian
perf/scripts: Tuple was set from long in both branches in python_process_event()
perf: Fix 'perf sched record' deadlock
perf, x86: Fix callgraphs of 32-bit processes on 64-bit kernels
perf, x86: Fix AMD hotplug & constraint initialization
x86: Move notify_cpu_starting() callback to a later stage
x86,kgdb: Always initialize the hw breakpoint attribute
perf: Use hot regs with software sched switch/migrate events
perf: Correctly align perf event tracing buffer
The trace event buffer used by perf to record raw sample events
is typed as an array of char and may then not be aligned to 8
by alloc_percpu().
But we need it to be aligned to 8 in sparc64 because we cast
this buffer into a random structure type built by the TRACE_EVENT()
macro to store the traces. So if a random 64 bits field is accessed
inside, it may be not under an expected good alignment.
Use an array of long instead to force the appropriate alignment, and
perform a compile time check to ensure the size in byte of the buffer
is a multiple of sizeof(long) so that its actual size doesn't get
shrinked under us.
This fixes unaligned accesses reported while using perf lock
in sparc 64.
Suggested-by: David Miller <davem@davemloft.net>
Suggested-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Currently, binary readers of the ring buffer only know where events were
lost, but not how many events were lost at that location.
This information is available, but it would require adding another
field to the sub buffer header to include it.
But when a event can not fit at the end of a sub buffer, it is written
to the next sub buffer. This means there is a good chance that the
buffer may have room to hold this counter. If it does, write
the counter at the end of the sub buffer and set another flag
in the data size field that states that this information exists.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that the ring buffer can keep track of where events are lost.
Use this information to the output of trace_pipe:
hackbench-3588 [001] 1326.701660: lock_acquire: ffffffff816591e0 read rcu_read_lock
hackbench-3588 [001] 1326.701661: lock_acquire: ffff88003f4091f0 &(&dentry->d_lock)->rlock
hackbench-3588 [001] 1326.701664: lock_release: ffff88003f4091f0 &(&dentry->d_lock)->rlock
CPU:1 [LOST 673 EVENTS]
hackbench-3588 [001] 1326.702711: kmem_cache_free: call_site=ffffffff81102b85 ptr=ffff880026d96738
hackbench-3588 [001] 1326.702712: lock_release: ffff88003e1480a8 &mm->mmap_sem
hackbench-3588 [001] 1326.702713: lock_acquire: ffff88003e1480a8 &mm->mmap_sem
Even works with the function graph tracer:
2) ! 170.098 us | }
2) 4.036 us | rcu_irq_exit();
2) 3.657 us | idle_cpu();
2) ! 190.301 us | }
CPU:2 [LOST 2196 EVENTS]
2) 0.853 us | } /* cancel_dirty_page */
2) | remove_from_page_cache() {
2) 1.578 us | _raw_spin_lock_irq();
2) | __remove_from_page_cache() {
Note, it does not work with the iterator "trace" file, since it requires
the use of consuming the page from the ring buffer to determine how many
events were lost, which the iterator does not do.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, when the ring buffer drops events, it does not record
the fact that it did so. It does inform the writer that the event
was dropped by returning a NULL event, but it does not put in any
place holder where the event was dropped.
This is not a trivial thing to add because the ring buffer mostly
runs in overwrite (flight recorder) mode. That is, when the ring
buffer is full, new data will overwrite old data.
In a produce/consumer mode, where new data is simply dropped when
the ring buffer is full, it is trivial to add the placeholder
for dropped events. When there's more room to write new data, then
a special event can be added to notify the reader about the dropped
events.
But in overwrite mode, any new write can overwrite events. A place
holder can not be inserted into the ring buffer since there never
may be room. A reader could also come in at anytime and miss the
placeholder.
Luckily, the way the ring buffer works, the read side can find out
if events were lost or not, and how many events. Everytime a write
takes place, if it overwrites the header page (the next read) it
updates a "overrun" variable that keeps track of the number of
lost events. When a reader swaps out a page from the ring buffer,
it can record this number, perfom the swap, and then check to
see if the number changed, and take the diff if it has, which would be
the number of events dropped. This can be stored by the reader
and returned to callers of the reader.
Since the reader page swap will fail if the writer moved the head
page since the time the reader page set up the swap, this gives room
to record the overruns without worrying about races. If the reader
sets up the pages, records the overrun, than performs the swap,
if the swap succeeds, then the overrun variable has not been
updated since the setup before the swap.
For binary readers of the ring buffer, a flag is set in the header
of each sub page (sub buffer) of the ring buffer. This flag is embedded
in the size field of the data on the sub buffer, in the 31st bit (the size
can be 32 or 64 bits depending on the architecture), but only 27
bits needs to be used for the actual size (less actually).
We could add a new field in the sub buffer header to also record the
number of events dropped since the last read, but this will change the
format of the binary ring buffer a bit too much. Perhaps this change can
be made if the information on the number of events dropped is considered
important enough.
Note, the notification of dropped events is only used by consuming reads
or peeking at the ring buffer. Iterating over the ring buffer does not
keep this information because the necessary data is only available when
a page swap is made, and the iterator does not swap out pages.
Cc: Robert Richter <robert.richter@amd.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
In some error handling cases the lock is not unlocked. The return is
converted to a goto, to share the unlock at the end of the function.
A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@r exists@
expression E1;
identifier f;
@@
f (...) { <+...
* spin_lock_irq (E1,...);
... when != E1
* return ...;
...+> }
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
LKML-Reference: <Pine.LNX.4.64.1003291736440.21896@ask.diku.dk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
# echo 1 > events/enable
# echo global > trace_clock
------------[ cut here ]------------
WARNING: at kernel/lockdep.c:3162 check_flags+0xb2/0x190()
...
---[ end trace 3f86734a89416623 ]---
possible reason: unannotated irqs-on.
...
There's no reason to use the raw_local_irq_save() in trace_clock_global.
The local_irq_save() version is fine, and does not cause the bug in lockdep.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4BA97FA1.7030606@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
ring-buffer: Do 8 byte alignment for 64 bit that can not handle 4 byte align
Support for the PMU's BTS features has been upstreamed in
v2.6.32, but we still have the old and disabled ptrace-BTS,
as Linus noticed it not so long ago.
It's buggy: TIF_DEBUGCTLMSR is trampling all over that MSR without
regard for other uses (perf) and doesn't provide the flexibility
needed for perf either.
Its users are ptrace-block-step and ptrace-bts, since ptrace-bts
was never used and ptrace-block-step can be implemented using a
much simpler approach.
So axe all 3000 lines of it. That includes the *locked_memory*()
APIs in mm/mlock.c as well.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20100325135413.938004390@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ring buffer uses 4 byte alignment while recording events into the
buffer, even on 64bit machines. This saves space when there are lots
of events being recorded at 4 byte boundaries.
The ring buffer has a zero copy method to write into the buffer, with
the reserving of space and then committing it. This may cause problems
when writing an 8 byte word into a 4 byte alignment (not 8). For x86 and
PPC this is not an issue, but on some architectures this would cause an
out-of-alignment exception.
This patch uses CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to determine
if it is OK to use 4 byte alignments on 64 bit machines. If it is not,
it forces the ring buffer event header to be 8 bytes and not 4,
and will align the length of the data to be 8 byte aligned.
This keeps the data payload at 8 byte alignments and will allow these
machines to run without issue.
The trick to this is that the header can be either 4 bytes or 8 bytes
depending on the length of the data payload. The 4 byte header
has a length field that supports up to 112 bytes. If the length of
the data is more than 112, the length field is set to zero, and the actual
length is stored in the next 4 bytes after the header.
When CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set, the code forces
zero in the 4 byte header forcing the length to be stored in the 4 byte
array, even with a small data load. It also forces the length of the
data load to be 8 byte aligned. The combination of these two guarantee
that the data is always at 8 byte alignment.
Tested-by: Frederic Weisbecker <fweisbec@gmail.com>
(on sparc64)
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (35 commits)
perf: Fix unexported generic perf_arch_fetch_caller_regs
perf record: Don't try to find buildids in a zero sized file
perf: export perf_trace_regs and perf_arch_fetch_caller_regs
perf, x86: Fix hw_perf_enable() event assignment
perf, ppc: Fix compile error due to new cpu notifiers
perf: Make the install relative to DESTDIR if specified
kprobes: Calculate the index correctly when freeing the out-of-line execution slot
perf tools: Fix sparse CPU numbering related bugs
perf_event: Fix oops triggered by cpu offline/online
perf: Drop the obsolete profile naming for trace events
perf: Take a hot regs snapshot for trace events
perf: Introduce new perf_fetch_caller_regs() for hot regs snapshot
perf/x86-64: Use frame pointer to walk on irq and process stacks
lockdep: Move lock events under lockdep recursion protection
perf report: Print the map table just after samples for which no map was found
perf report: Add multiple event support
perf session: Change perf_session post processing functions to take histogram tree
perf session: Add storage for seperating event types in report
perf session: Change add_hist_entry to take the tree root instead of session
perf record: Add ID and to recorded event data when recording multiple events
...
perf_arch_fetch_caller_regs() is exported for the overriden x86
version, but not for the generic weak version.
As a general rule, weak functions should not have their symbol
exported in the same file they are defined.
So let's export it on trace_event_perf.c as it is used by trace
events only.
This fixes:
ERROR: ".perf_arch_fetch_caller_regs" [fs/xfs/xfs.ko] undefined!
ERROR: ".perf_arch_fetch_caller_regs" [arch/powerpc/platforms/cell/spufs/spufs.ko] undefined!
-v2: And also only build it if trace events are enabled.
-v3: Fix changelog mistake
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1268697902-9518-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
locking: Make sparse work with inline spinlocks and rwlocks
x86/mce: Fix RCU lockdep splats
rcu: Increase RCU CPU stall timeouts if PROVE_RCU
ftrace: Replace read_barrier_depends() with rcu_dereference_raw()
rcu: Suppress RCU lockdep warnings during early boot
rcu, ftrace: Fix RCU lockdep splat in ftrace_perf_buf_prepare()
rcu: Suppress __mpol_dup() false positive from RCU lockdep
rcu: Make rcu_read_lock_sched_held() handle !PREEMPT
rcu: Add control variables to lockdep_rcu_dereference() diagnostics
rcu, cgroup: Relax the check in task_subsys_state() as early boot is now handled by lockdep-RCU
rcu: Use wrapper function instead of exporting tasklist_lock
sched, rcu: Fix rcu_dereference() for RCU-lockdep
rcu: Make task_subsys_state() RCU-lockdep checks handle boot-time use
rcu: Fix holdoff for accelerated GPs for last non-dynticked CPU
x86/gart: Unexport gart_iommu_aperture
Fix trivial conflicts in kernel/trace/ftrace.c
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Do not record user stack trace from NMI context
tracing: Disable buffer switching when starting or stopping trace
tracing: Use same local variable when resetting the ring buffer
function-graph: Init curr_ret_stack with ret_stack
ring-buffer: Move disabled check into preempt disable section
function-graph: Add tracing_thresh support to function_graph tracer
tracing: Update the comm field in the right variable in update_max_tr
function-graph: Use comment notation for func names of dangling '}'
function-graph: Fix unused reference to ftrace_set_func()
tracing: Fix warning in s_next of trace file ops
tracing: Include irqflags headers from trace clock
A bug was found with Li Zefan's ftrace_stress_test that caused applications
to segfault during the test.
Placing a tracing_off() in the segfault code, and examining several
traces, I found that the following was always the case. The lock tracer
was enabled (lockdep being required) and userstack was enabled. Testing
this out, I just enabled the two, but that was not good enough. I needed
to run something else that could trigger it. Running a load like hackbench
did not work, but executing a new program would. The following would
trigger the segfault within seconds:
# echo 1 > /debug/tracing/options/userstacktrace
# echo 1 > /debug/tracing/events/lock/enable
# while :; do ls > /dev/null ; done
Enabling the function graph tracer and looking at what was happening
I finally noticed that all cashes happened just after an NMI.
1) | copy_user_handle_tail() {
1) | bad_area_nosemaphore() {
1) | __bad_area_nosemaphore() {
1) | no_context() {
1) | fixup_exception() {
1) 0.319 us | search_exception_tables();
1) 0.873 us | }
[...]
1) 0.314 us | __rcu_read_unlock();
1) 0.325 us | native_apic_mem_write();
1) 0.943 us | }
1) 0.304 us | rcu_nmi_exit();
[...]
1) 0.479 us | find_vma();
1) | bad_area() {
1) | __bad_area() {
After capturing several traces of failures, all of them happened
after an NMI. Curious about this, I added a trace_printk() to the NMI
handler to read the regs->ip to see where the NMI happened. In which I
found out it was here:
ffffffff8135b660 <page_fault>:
ffffffff8135b660: 48 83 ec 78 sub $0x78,%rsp
ffffffff8135b664: e8 97 01 00 00 callq ffffffff8135b800 <error_entry>
What was happening is that the NMI would happen at the place that a page
fault occurred. It would call rcu_read_lock() which was traced by
the lock events, and the user_stack_trace would run. This would trigger
a page fault inside the NMI. I do not see where the CR2 register is
saved or restored in NMI handling. This means that it would corrupt
the page fault handling that the NMI interrupted.
The reason the while loop of ls helped trigger the bug, was that
each execution of ls would cause lots of pages to be faulted in, and
increase the chances of the race happening.
The simple solution is to not allow user stack traces in NMI context.
After this patch, I ran the above "ls" test for a couple of hours
without any issues. Without this patch, the bug would trigger in less
than a minute.
Cc: stable@kernel.org
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the trace iterator is read, tracing_start() and tracing_stop()
is called to stop tracing while the iterator is processing the trace
output.
These functions disable both the standard buffer and the max latency
buffer. But if the wakeup tracer is running, it can switch these
buffers between the two disables:
buffer = global_trace.buffer;
if (buffer)
ring_buffer_record_disable(buffer);
<<<--------- swap happens here
buffer = max_tr.buffer;
if (buffer)
ring_buffer_record_disable(buffer);
What happens is that we disabled the same buffer twice. On tracing_start()
we can enable the same buffer twice. All ring_buffer_record_disable()
must be matched with a ring_buffer_record_enable() or the buffer
can be disable permanently, or enable prematurely, and cause a bug
where a reset happens while a trace is commiting.
This patch protects these two by taking the ftrace_max_lock to prevent
a switch from occurring.
Found with Li Zefan's ftrace_stress_test.
Cc: stable@kernel.org
Reported-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In the ftrace code that resets the ring buffer it references the
buffer with a local variable, but then uses the tr->buffer as the
parameter to reset. If the wakeup tracer is running, which can
switch the tr->buffer with the max saved buffer, this can break
the requirement of disabling the buffer before the reset.
buffer = tr->buffer;
ring_buffer_record_disable(buffer);
synchronize_sched();
__tracing_reset(tr->buffer, cpu);
If the tr->buffer is swapped, then the reset is not happening to the
buffer that was disabled. This will cause the ring buffer to fail.
Found with Li Zefan's ftrace_stress_test.
Cc: stable@kernel.org
Reported-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the graph tracer is active, and a task is forked but the allocating of
the processes graph stack fails, it can cause crash later on.
This is due to the temporary stack being NULL, but the curr_ret_stack
variable is copied from the parent. If it is not -1, then in
ftrace_graph_probe_sched_switch() the following:
for (index = next->curr_ret_stack; index >= 0; index--)
next->ret_stack[index].calltime += timestamp;
Will cause a kernel OOPS.
Found with Li Zefan's ftrace_stress_test.
Cc: stable@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring buffer resizing and resetting relies on a schedule RCU
action. The buffers are disabled, a synchronize_sched() is called
and then the resize or reset takes place.
But this only works if the disabling of the buffers are within the
preempt disabled section, otherwise a window exists that the buffers
can be written to while a reset or resize takes place.
Cc: stable@kernel.org
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B949E43.2010906@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Export perf_trace_regs and perf_arch_fetch_caller_regs since module will
use these.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
[ use EXPORT_PER_CPU_SYMBOL_GPL() ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4B989C1B.2090407@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Replace the calls to read_barrier_depends() in
ftrace_list_func() with rcu_dereference_raw() to improve
readability. The reason that we use rcu_dereference_raw() here
is that removed entries are never freed, instead they are simply
leaked. This is one of a very few cases where use of
rcu_dereference_raw() is the long-term right answer. And I
don't yet know of any others. ;-)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1267830207-9474-1-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Drop the obsolete "profile" naming used by perf for trace events.
Perf can now do more than simple events counting, so generalize
the API naming.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
We are taking a wrong regs snapshot when a trace event triggers.
Either we use get_irq_regs(), which gives us the interrupted
registers if we are in an interrupt, or we use task_pt_regs()
which gives us the state before we entered the kernel, assuming
we are lucky enough to be no kernel thread, in which case
task_pt_regs() returns the initial set of regs when the kernel
thread was started.
What we want is different. We need a hot snapshot of the regs,
so that we can get the instruction pointer to record in the
sample, the frame pointer for the callchain, and some other
things.
Let's use the new perf_fetch_caller_regs() for that.
Comparison with perf record -e lock: -R -a -f -g
Before:
perf [kernel] [k] __do_softirq
|
--- __do_softirq
|
|--55.16%-- __open
|
--44.84%-- __write_nocancel
After:
perf [kernel] [k] perf_tp_event
|
--- perf_tp_event
|
|--41.07%-- lock_acquire
| |
| |--39.36%-- _raw_spin_lock
| | |
| | |--7.81%-- hrtimer_interrupt
| | | smp_apic_timer_interrupt
| | | apic_timer_interrupt
The old case was producing unreliable callchains. Now having
right frame and instruction pointers, we have the trace we
want.
Also syscalls and kprobe events already have the right regs,
let's use them instead of wasting a retrieval.
v2: Follow the rename perf_save_regs() -> perf_fetch_caller_regs()
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Archs <linux-arch@vger.kernel.org>
Add support for tracing_thresh to the function_graph tracer. This
version of this feature isolates the checks into new entry and
return functions, to avoid adding more conditional code into the
main function_graph paths.
When the tracing_thresh is set and the function graph tracer is
enabled, only the functions that took longer than the time in
microseconds that was set in tracing_thresh are recorded. To do this
efficiently, only the function exits are recorded:
[tracing]# echo 100 > tracing_thresh
[tracing]# echo function_graph > current_tracer
[tracing]# cat trace
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
1) ! 119.214 us | } /* smp_apic_timer_interrupt */
1) <========== |
0) ! 101.527 us | } /* __rcu_process_callbacks */
0) ! 126.461 us | } /* rcu_process_callbacks */
0) ! 145.111 us | } /* __do_softirq */
0) ! 149.667 us | } /* do_softirq */
0) ! 168.817 us | } /* irq_exit */
0) ! 248.254 us | } /* smp_apic_timer_interrupt */
Also, add support for specifying tracing_thresh on the kernel
command line. When used like so: "tracing_thresh=200 ftrace=function_graph"
this can be used to analyse system startup. It is important to disable
tracing soon after boot, in order to avoid losing the trace data.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
LKML-Reference: <4B87098B.4040308@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latency output showed:
# | task: -3 (uid:0 nice:0 policy:1 rt_prio:99)
The comm is missing in the "task:" and it looks like a minus 3 is
the output. The correct display should be:
# | task: migration/0-3 (uid:0 nice:0 policy:1 rt_prio:99)
The problem is that the comm is being stored in the wrong data
structure. The max_tr.data[cpu] is what stores the comm, not the
tr->data[cpu].
Before this patch the max_tr.data[cpu]->comm was zeroed and the /debug/trace
ended up showing just the '-' sign followed by the pid.
Also remove a needless initialization of max_data.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1267824230-23861-1-git-send-email-acme@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a '}' does not have a matching function start, the name is printed
within parenthesis. But this makes it confusing between ending '}'
and function starts. This patch makes the function name appear in C comment
notation.
Old view:
3) 1.281 us | } (might_fault)
3) 3.620 us | } (filldir)
3) 5.251 us | } (call_filldir)
3) | call_filldir() {
3) | filldir() {
New view:
3) 1.281 us | } /* might_fault */
3) 3.620 us | } /* filldir */
3) 5.251 us | } /* call_filldir */
3) | call_filldir() {
3) | filldir() {
Requested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The declaration of ftrace_set_func() is at the start of the ftrace.c file
and wrapped with a #ifdef CONFIG_FUNCTION_GRAPH condition. If function
graph tracing is enabled but CONFIG_DYNAMIC_FTRACE is not, a warning
about that function being declared static and unused is given.
This really should have been placed within the CONFIG_FUNCTION_GRAPH
condition that uses ftrace_set_func().
Moving the declaration down fixes the warning and makes the code cleaner.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This warning in s_next() can be triggered by lseek():
[<c018b3f7>] ? s_next+0x77/0x80
[<c013e3c1>] warn_slowpath_common+0x81/0xa0
[<c018b3f7>] ? s_next+0x77/0x80
[<c013e3fa>] warn_slowpath_null+0x1a/0x20
[<c018b3f7>] s_next+0x77/0x80
[<c01efa77>] traverse+0x117/0x200
[<c01eff13>] seq_lseek+0xa3/0x120
[<c01efe70>] ? seq_lseek+0x0/0x120
[<c01d7081>] vfs_llseek+0x41/0x50
[<c01d8116>] sys_llseek+0x66/0xa0
[<c0102bd0>] sysenter_do_call+0x12/0x26
The iterator "leftover" variable is zeroed in the opening of the trace
file. But lseek can call s_start() which will call s_next() without
reseting the "leftover" variable back to zero, which might trigger
the WARN_ON_ONCE(iter->leftover) that is in s_next().
Cc: stable@kernel.org
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B8CE06A.9090207@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'for-2.6.34' of git://git.kernel.dk/linux-2.6-block: (38 commits)
block: don't access jiffies when initialising io_context
cfq: remove 8 bytes of padding from cfq_rb_root on 64 bit builds
block: fix for "Consolidate phys_segment and hw_segment limits"
cfq-iosched: quantum check tweak
blktrace: perform cleanup after setup error
blkdev: fix merge_bvec_fn return value checks
cfq-iosched: requests "in flight" vs "in driver" clarification
cciss: Fix problem with scatter gather elements in the scsi half of the driver
cciss: eliminate unnecessary pointer use in cciss scsi code
cciss: do not use void pointer for scsi hba data
cciss: factor out scatter gather chain block mapping code
cciss: fix scatter gather chain block dma direction kludge
cciss: simplify scatter gather code
cciss: factor out scatter gather chain block allocation and freeing
cciss: detect bad alignment of scsi commands at build time
cciss: clarify command list padding calculation
cfq-iosched: rethink seeky detection for SSDs
cfq-iosched: rework seeky detection
block: remove padding from io_context on 64bit builds
block: Consolidate phys_segment and hw_segment limits
...
Currently even if BLKTRACESETUP ioctl has failed user must call
BLKTRACETEARDOWN to be shure what all staff was cleaned, which
is contr-intuitive.
Let's setup ioctl make necessery cleanup by it self.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
trace_clock.c includes spinlock.h, which ends up including
asm/system.h, which in turn includes linux/irqflags.h in x86.
So the definition of raw_local_irq_save is luckily covered there,
but this is not the case in parisc:
tip/kernel/trace/trace_clock.c:86: error: implicit declaration of function 'raw_local_irq_save'
tip/kernel/trace/trace_clock.c:112: error: implicit declaration of function 'raw_local_irq_restore'
We need to include linux/irqflags.h directly from trace_clock.c
to avoid such build error.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The function graph tracer is currently the most invasive tracer
in the ftrace family. It can easily overflow the buffer even with
10megs per CPU. This means that events can often be lost.
On start up, or after events are lost, if the function return is
recorded but the function enter was lost, all we get to see is the
exiting '}'.
Here is how a typical trace output starts:
[tracing] cat trace
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
0) + 91.897 us | }
0) ! 567.961 us | }
0) <========== |
0) ! 579.083 us | _raw_spin_lock_irqsave();
0) 4.694 us | _raw_spin_unlock_irqrestore();
0) ! 594.862 us | }
0) ! 603.361 us | }
0) ! 613.574 us | }
0) ! 623.554 us | }
0) 3.653 us | fget_light();
0) | sock_poll() {
There are a series of '}' with no matching "func() {". There's no information
to what functions these ending brackets belong to.
This patch adds a stack on the per cpu structure used in outputting
the function graph tracer to keep track of what function was outputted.
Then on a function exit event, it checks the depth to see if the
function exit has a matching entry event. If it does, then it only
prints the '}', otherwise it adds the function name after the '}'.
This allows function exit events to show what function they belong to
at trace output startup, when the entry was lost due to ring buffer
overflow, or even after a new task is scheduled in.
Here is what the above trace will look like after this patch:
[tracing] cat trace
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
0) + 91.897 us | } (irq_exit)
0) ! 567.961 us | } (smp_apic_timer_interrupt)
0) <========== |
0) ! 579.083 us | _raw_spin_lock_irqsave();
0) 4.694 us | _raw_spin_unlock_irqrestore();
0) ! 594.862 us | } (add_wait_queue)
0) ! 603.361 us | } (__pollwait)
0) ! 613.574 us | } (tcp_poll)
0) ! 623.554 us | } (sock_poll)
0) 3.653 us | fget_light();
0) | sock_poll() {
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Discard freeing field->type since it is not necessary.
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Wenji Huang <wenji.huang@oracle.com>
LKML-Reference: <1266997226-6833-5-git-send-email-wenji.huang@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The "cpu" variable is declared at the start of the function and
also within a branch, with the exact same initialization.
Remove the local variable of the same name in the branch.
Signed-off-by: Wenji Huang <wenji.huang@oracle.com>
LKML-Reference: <1266997226-6833-3-git-send-email-wenji.huang@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The power tracer has been converted to power trace events.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B84D50E.4070806@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
GCC 4.5 introduces behavior that forces the alignment of structures to
use the largest possible value. The default value is 32 bytes, so if
some structures are defined with a 4-byte alignment and others aren't
declared with an alignment constraint at all - it will align at 32-bytes.
For things like the ftrace events, this results in a non-standard array.
When initializing the ftrace subsystem, we traverse the _ftrace_events
section and call the initialization callback for each event. When the
structures are misaligned, we could be treating another part of the
structure (or the zeroed out space between them) as a function pointer.
This patch forces the alignment for all the ftrace_event_call structures
to 4 bytes.
Without this patch, the kernel fails to boot very early when built with
gcc 4.5.
It's trivial to check the alignment of the members of the array, so it
might be worthwhile to add something to the build system to do that
automatically. Unfortunately, that only covers this case. I've asked one
of the gcc developers about adding a warning when this condition is seen.
Cc: stable@kernel.org
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
LKML-Reference: <4B85770B.6010901@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
KPROBES_EVENT actually depends on the regs and stack access API
(b1cf540f) and not on x86.
So introduce a new config option which architectures can select if
they have the API implemented and switch x86.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
LKML-Reference: <20100210162517.GB6933@osiris.boeblingen.de.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Most implementations of arch_syscall_addr() are the same, so create a
default version in common code and move the one piece that differs (the
syscall table) to asm/syscall.h. New arch ports don't have to waste
time copying & pasting this simple function.
The s390/sparc versions need to be different, so document why.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1264498803-17278-1-git-send-email-vapier@gentoo.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Trying to add a probe like:
echo p:myprobe 0x10000 > /sys/kernel/debug/tracing/kprobe_events
will fail since the wrong pointer is passed to strict_strtoul
when trying to convert the address to an unsigned long.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100210162346.GA6933@osiris.boeblingen.de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I don't see why we can only clear all functions from the filter.
After patching:
# echo sys_open > set_graph_function
# echo sys_close >> set_graph_function
# cat set_graph_function
sys_open
sys_close
# echo '!sys_close' >> set_graph_function
# cat set_graph_function
sys_open
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B726388.2000408@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some misspelled occurences of 'octet' and some comments were also fixed
as I was on it.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some comments misspell "truly"; this fixes them. No code changes.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Remove record freezing. Because kprobes never puts probe on
ftrace's mcount call anymore, it doesn't need ftrace to check
whether kprobes on it.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: przemyslaw@pawelczyk.it
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100202214925.4694.73469.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Introducing *_text_reserved functions for checking the text
address range is partially reserved or not. This patch provides
checking routines for x86 smp alternatives and dynamic ftrace.
Since both functions modify fixed pieces of kernel text, they
should reserve and protect those from other dynamic text
modifier, like kprobes.
This will also be extended when introducing other subsystems
which modify fixed pieces of kernel text. Dynamic text modifiers
should avoid those.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: przemyslaw@pawelczyk.it
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <20100202214911.4694.16587.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we cat <debugfs>/tracing/stack_trace, we may cause circular lock:
sys_read()
t_start()
arch_spin_lock(&max_stack_lock);
t_show()
seq_printf(), vsnprintf() .... /* they are all trace-able,
when they are traced, max_stack_lock may be required again. */
The following script can trigger this circular dead lock very easy:
#!/bin/bash
echo 1 > /proc/sys/kernel/stack_tracer_enabled
mount -t debugfs xxx /mnt > /dev/null 2>&1
(
# make check_stack() zealous to require max_stack_lock
for ((; ;))
{
echo 1 > /mnt/tracing/stack_max_size
}
) &
for ((; ;))
{
cat /mnt/tracing/stack_trace > /dev/null
}
To fix this bug, we increase the percpu trace_active before
require the lock.
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B67D4F9.9080905@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The return values of the kprobe's tracing functions are meaningless,
lets remove these.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4B60E9A3.2040505@cn.fujitsu.com>
[fweisbec@gmail: whitespace fixes, drop useless void returns in end
of functions]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Introduce ftrace_perf_buf_prepare() and ftrace_perf_buf_submit() to
gather the common code that operates on raw events sampling buffer.
This cleans up redundant code between regular trace events, syscall
events and kprobe events.
Changelog v1->v2:
- Rename function name as per Masami and Frederic's suggestion
- Add __kprobes for ftrace_perf_buf_prepare() and make
ftrace_perf_buf_submit() inline as per Masami's suggestion
- Export ftrace_perf_buf_prepare since modules will use it
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4B60E92D.9000808@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
In the function graph tracer, a calling function is to be traced
only when it is enabled through the set_graph_function file,
or when it is nested in an enabled function.
Current code uses TSK_TRACE_FL_GRAPH to test whether it is nested
or not. Looking at the code, we can get this:
(trace->depth > 0) <==> (TSK_TRACE_FL_GRAPH is set)
trace->depth is more explicit to tell that it is nested.
So we use trace->depth directly and simplify the code.
No functionality is changed.
TSK_TRACE_FL_GRAPH is not removed yet, it is left for future usage.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4B4DB0B6.7040607@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Update the graph tracer examples to cover the new frame pointer semantics
(in terms of passing it along). Move the HAVE_FUNCTION_GRAPH_FP_TEST docs
out of the Kconfig, into the right place, and expand on the details.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
LKML-Reference: <1264165967-18938-1-git-send-email-vapier@gentoo.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the iterator comes to an empty page for some reason, or if
the page is emptied by a consuming read. The iterator code currently
does not check if the iterator is pass the contents, and may
return a false entry.
This patch adds a check to the ring buffer iterator to test if the
current page has been completely read and sets the iterator to the
next page if necessary.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Usually reads of the ring buffer is performed by a single task.
There are two types of reads from the ring buffer.
One is a consuming read which will consume the entry that was read
and the next read will be the entry that follows.
The other is an iterator that will let the user read the contents of
the ring buffer without modifying it. When an iterator is allocated,
writes to the ring buffer are disabled to protect the iterator.
The problem exists when consuming reads happen while an iterator is
allocated. Specifically, the kind of read that swaps out an entire
page (used by splice) and replaces it with a new read. If the iterator
is on the page that is swapped out, then the next read may read
from this swapped out page and return garbage.
This patch adds a check when reading the iterator to make sure that
the iterator contents are still valid. If a consuming read has taken
place, the iterator is reset.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the contents of the ftrace ring buffer gets corrupted and the trace
file is read, it could create a kernel oops (usualy just killing the user
task thread). This is caused by the checking of the pid in the buffer.
If the pid is negative, it still references the cmdline cache array,
which could point to an invalid address.
The simple fix is to test for negative PIDs.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Update kprobe tracing self test for new syntax (it supports
deleting individual probes, and drops $argN support)
and behavior change (new probes are disabled in default).
This selftest includes the following checks:
- Adding function-entry probe and return probe with arguments.
- Enabling these probes.
- Deleting it individually.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100114051211.7814.29436.stgit@localhost6.localdomain6>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Each time we save a function entry from the function graph
tracer, we check if the trace array is set, which is wasteful
because it is set anyway before we start the tracer. All we need
is to ensure we have good read and write orderings. When we set
the trace array, we just need to guarantee it to be visible
before starting tracing.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
LKML-Reference: <1263453795-7496-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We should be clear on 2 things:
- the length parameter of a match callback includes
tailing '\0'.
- the string to be searched might not be NULL-terminated.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B4E8770.7000608@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
MATCH_FULL matching for PTR_STRING is not working correctly:
# echo 'func == vt' > events/bkl/lock_kernel/filter
# echo 1 > events/bkl/lock_kernel/enable
...
# cat trace
Xorg-1484 [000] 1973.392586: lock_kernel: ... func=vt_ioctl()
gpm-1402 [001] 1974.027740: lock_kernel: ... func=vt_ioctl()
We should pass to regex.match(..., len) the length (including '\0')
of the source string instead of the length of the pattern string.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B4E8763.5070707@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The @str might not be NULL-terminated if it's of type
DYN_STRING or STATIC_STRING, so we should use strnstr()
instead of strstr().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B4E8753.2000102@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For '*foo' pattern, we should allow any string ending with
'foo', but event filtering incorrectly disallows strings
like bar_foo_foo:
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B4E8735.6070604@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
MATCH_FRONT_ONLY actually is a full matching:
# ./perf record -R -f -a -e lock:lock_acquire \
--filter 'name ~rcu_*' sleep 1
# ./perf trace
(no output)
We should pass the length of the pattern string to strncmp().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B4E8721.5090301@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Drop function argument access syntax, because the function
arguments depend on not only architecture but also
compile-options and function API. And now, we have perf-probe
for finding register/memory assigned to each argument.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Neuling <mikey@neuling.org>
Cc: linuxppc-dev@ozlabs.org
LKML-Reference: <20100105224648.19431.52309.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If the very unlikely case happens where the writer moves the head by one
between where the head page is read and where the new reader page
is assigned _and_ the writer then writes and wraps the entire ring buffer
so that the head page is back to what was originally read as the head page,
the page to be swapped will have a corrupted next pointer.
Simple solution is to wrap the assignment of the next pointer with a
rb_list_head().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This reference at the end of rb_get_reader_page() was causing off-by-one
writes to the prev pointer of the page after the reader page when that
page is the head page, and therefore the reader page has the RB_PAGE_HEAD
flag in its list.next pointer. This eventually results in a GPF in a
subsequent call to rb_set_head_page() (usually from rb_get_reader_page())
when that prev pointer is dereferenced. The dereferenced register would
characteristically have an address that appears shifted left by one byte
(eg, ffxxxxxxxxxxxxyy instead of ffffxxxxxxxxxxxx) due to being written at
an address one byte too high.
Signed-off-by: David Sharp <dhsharp@google.com>
LKML-Reference: <1262826727-9090-1-git-send-email-dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the ftrace stacktrace option is set, then add the stack dumps to
trace_printk.
Requested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
At the beginning, access to the ring buffer was fully serialized
by trace_types_lock. Patch d7350c3f45 gives more freedom to readers,
and patch b04cc6b1f6 adds code to protect trace_pipe and cpu#/trace_pipe.
But actually it is not enough, ring buffer readers are not always
read-only, they may consume data.
This patch makes accesses to trace, trace_pipe, trace_pipe_raw
cpu#/trace, cpu#/trace_pipe and cpu#/trace_pipe_raw serialized.
And removes tracing_reader_cpumask which is used to protect trace_pipe.
Details:
Ring buffer serializes readers, but it is low level protection.
The validity of the events (which returns by ring_buffer_peek() ..etc)
are not protected by ring buffer.
The content of events may become garbage if we allow another process to consume
these events concurrently:
A) the page of the consumed events may become a normal page
(not reader page) in ring buffer, and this page will be rewritten
by the events producer.
B) The page of the consumed events may become a page for splice_read,
and this page will be returned to system.
This patch adds trace_access_lock() and trace_access_unlock() primitives.
These primitives allow multi process access to different cpu ring buffers
concurrently.
These primitives don't distinguish read-only and read-consume access.
Multi read-only access is also serialized.
And we don't use these primitives when we open files,
we only use them when we read files.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B447D52.1050602@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The previous patches added the use of print_fmt string and changes
the trace_define_field() function to also create the fields and
format output for the event format files.
text data bss dec hex filename
5857201 1355780 9336808 16549789 fc879d vmlinux
5884589 1351684 9337896 16574169 fce6d9 vmlinux-orig
The above shows the size of the vmlinux after this patch set
compared to the vmlinux-orig which is before the patch set.
This saves us 27k on text, 1k on bss and adds just 4k of data.
The total savings of 24k in size.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B273D4D.40604@cn.fujitsu.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The calls ftrace_format_##call() and ftrace_define_fields_##call()
are almost duplicate in functionality. With the addition of the
print_fmt in previous patches, these two functions can be merged
into one.
The trace_define_field() defines the fields and links them into
the struct ftrace_event_call. The previous patches introduced
the print_fmt field and this can now be used with the trace_define_field()
to create the event format file fields and print_fmt field.
The struct ftrace_event_call->fields are used to print the fields
The struct ftrace_event_call->print_fmt is used to print
the "print fmt: XXXXXXXXXXX" line.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B273D49.5000006@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In the clean up of having all events call one specific function,
the syscall event init was changed to call this helper function.
With the new print_fmt updates, the syscalls need to do special
initializations. This patch converts the syscall events to call
its own init function again.
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This is part of a patch set that removes the show_format method
in the ftrace event macros.
Add the print_fmt initialization to the kprobe events.
The print_fmt is still not used, but will be in the follow up
patches.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B273D45.3080100@cn.fujitsu.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This is part of a patch set that removes the show_format method
in the ftrace event macros.
Add the print_fmt initialization to the syscall events.
The print_fmt is still not used, but will be in the follow up
patches.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B273D41.609@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This is part of a patch set that removes the show_format method
in the ftrace event macros.
The print_fmt field is added to hold the string that shows
the print_fmt in the event format files. This patch only adds
the field but it is currently not used. Later patches will use
this field to enable us to remove the show_format field
and function.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B273D3E.2000704@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This is part of a patch set that removes the show_format method
in the ftrace event macros.
This patch set requires that all fields are added to the
ftrace_event_call->fields. This patch changes __dynamic_array()
to call trace_define_field() to include fields that use __dynamic_array().
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B273D36.8090100@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ringbuffer*.c are the last users of local.h.
Remove the include from modules.h and add it to ringbuffer files.
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Fix sign fields in ftrace_define_fields_##call()
tracing/syscalls: Fix typo in SYSCALL_DEFINE0
tracing/kprobe: Show sign of fields in trace_kprobe format files
ksym_tracer: Remove trace_stat
ksym_tracer: Fix race when incrementing count
ksym_tracer: Fix to allow writing newline to ksym_trace_filter
ksym_tracer: Fix to make the tracer work
tracing: Kconfig spelling fixes and cleanups
tracing: Fix setting tracer specific options
Documentation: Update ftrace-design.txt
Documentation: Update tracepoint-analysis.txt
Documentation: Update mmiotrace.txt
Add is_signed_type() call to trace_define_field() in ftrace macros.
The code previously just passed in 0 (false), disregarding whether
or not the field was actually a signed type.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B273D3A.6020007@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The format files of trace_kprobe do not show the sign of the fields.
The other format files show the field signed type of the fields and
this patch makes the trace_kprobe formats consistent with the others.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B273D27.5040009@cn.fujitsu.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_stat is problematic. Don't use it, use seqfile instead.
This fixes a race that reading the stat file is not protected by
any lock, which can lead to use after free.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B3AF203.40200@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We are under rcu read section but not holding the write lock, so
count++ is not atomic. Use atomic64_t instead.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B3AF1EC.9010608@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It used to work, but now doesn't:
# echo > ksym_filter
bash: echo: write error: Invalid argument
It's caused by d954fbf0ff
("tracing: Fix wrong usage of strstrip in trace_ksyms").
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B3AF1D7.5040400@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
ksym tracer doesn't work:
# echo tasklist_lock:rw- > ksym_trace_filter
-bash: echo: write error: No such device
It's because we pass to perf_event_create_kernel_counter()
a cpu number which is not present.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B3AF19E.1010201@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix filename reference (ftrace-implementation.txt ->
ftrace-design.txt).
Fix spelling, punctuation, grammar.
Fix help text indentation and line lengths to reduce need for
horizontal scrolling or larger window sizes.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091221120117.3fb49cdc.randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Quoted from Ingo:
| This reminds me - i think we should eliminate CONFIG_EVENT_PROFILE -
| it's an unnecessary Kconfig complication. If both PERF_EVENTS and
| EVENT_TRACING is enabled we should expose generic tracepoints.
|
| Nor is it limited to event 'profiling', so it has become a misnomer as
| well.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B2F1557.2050705@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The function __set_tracer_option() takes as its last parameter a
"neg" value. If set it should negate the value of the option.
The trace_options_write() passed the value written to the file
which is what the new value needs to be set as. But since this
is not the negative, it never sets the value.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf session: Make events_stats u64 to avoid overflow on 32-bit arches
hw-breakpoints: Fix hardware breakpoints -> perf events dependency
perf events: Dont report side-band events on each cpu for per-task-per-cpu events
perf events, x86/stacktrace: Fix performance/softlockup by providing a special frame pointer-only stack walker
perf events, x86/stacktrace: Make stack walking optional
perf events: Remove unused perf_counter.h header file
perf probe: Check new event name
kprobe-tracer: Check new event/group name
perf probe: Check whether debugfs path is correct
perf probe: Fix libdwarf include path for Debian
* 'for-33' of git://repo.or.cz/linux-kbuild: (29 commits)
net: fix for utsrelease.h moving to generated
gen_init_cpio: fixed fwrite warning
kbuild: fix make clean after mismerge
kbuild: generate modules.builtin
genksyms: properly consider EXPORT_UNUSED_SYMBOL{,_GPL}()
score: add asm/asm-offsets.h wrapper
unifdef: update to upstream revision 1.190
kbuild: specify absolute paths for cscope
kbuild: create include/generated in silentoldconfig
scripts/package: deb-pkg: use fakeroot if available
scripts/package: add KBUILD_PKG_ROOTCMD variable
scripts/package: tar-pkg: use tar --owner=root
Kbuild: clean up marker
net: add net_tstamp.h to headers_install
kbuild: move utsrelease.h to include/generated
kbuild: move autoconf.h to include/generated
drop explicit include of autoconf.h
kbuild: move compile.h to include/generated
kbuild: drop include/asm
kbuild: do not check for include/asm-$ARCH
...
Fixed non-conflicting clean merge of modpost.c as per comments from
Stephen Rothwell (modpost.c had grown an include of linux/autoconf.h
that needed to be changed to generated/autoconf.h)
The current print_context_stack helper that does the stack
walking job is good for usual stacktraces as it walks through
all the stack and reports even addresses that look unreliable,
which is nice when we don't have frame pointers for example.
But we have users like perf that only require reliable
stacktraces, and those may want a more adapted stack walker, so
lets make this function a callback in stacktrace_ops that users
can tune for their needs.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1261024834-5336-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Check new event/group name is same syntax as a C symbol. In other
words, checking the name is as like as other tracepoint events.
This can prevent user to create an event with useless name (e.g.
foo|bar, foo*bar).
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091216222408.14459.68790.stgit@dhcp-100-2-132.bos.redhat.com>
[ v2: minor cleanups ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Fix return of trace_dump_stack()
ksym_tracer: Fix bad cast
tracing/power: Remove two exports
tracing: Change event->profile_count to be int type
tracing: Simplify trace_option_write()
tracing: Remove useless trace option
tracing: Use seq file for trace_clock
tracing: Use seq file for trace_options
function-graph: Allow writing the same val to set_graph_function
ftrace: Call trace_parser_clear() properly
ftrace: Return EINVAL when writing invalid val to set_ftrace_filter
tracing: Move a printk out of ftrace_raw_reg_event_foo()
tracing: Pull up calls to trace_define_common_fields()
tracing: Extract duplicate ftrace_raw_init_event_foo()
ftrace.h: Use common pr_info fmt string
tracing: Add stack trace to irqsoff tracer
tracing: Add trace_dump_stack()
ring-buffer: Move resize integrity check under reader lock
ring-buffer: Use sync sched protection on ring buffer resizing
tracing: Fix wrong usage of strstrip in trace_ksyms
The trace_dump_stack() returned a value for a void function.
Also, added the missing stub for trace_dump_stack() when tracing is
not configured.
Reported-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20091214162713.GA31060@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Name space cleanup. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
Further name space cleanup. No functional change
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
The raw_spin* namespace was taken by lockdep for the architecture
specific implementations. raw_spin_* would be the ideal name space for
the spinlocks which are not converted to sleeping locks in preempt-rt.
Linus suggested to convert the raw_ to arch_ locks and cleanup the
name space instead of using an artifical name like core_spin,
atomic_spin or whatever
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits)
m68k: rename global variable vmalloc_end to m68k_vmalloc_end
percpu: add missing per_cpu_ptr_to_phys() definition for UP
percpu: Fix kdump failure if booted with percpu_alloc=page
percpu: make misc percpu symbols unique
percpu: make percpu symbols in ia64 unique
percpu: make percpu symbols in powerpc unique
percpu: make percpu symbols in x86 unique
percpu: make percpu symbols in xen unique
percpu: make percpu symbols in cpufreq unique
percpu: make percpu symbols in oprofile unique
percpu: make percpu symbols in tracer unique
percpu: make percpu symbols under kernel/ and mm/ unique
percpu: remove some sparse warnings
percpu: make alloc_percpu() handle array types
vmalloc: fix use of non-existent percpu variable in put_cpu_var()
this_cpu: Use this_cpu_xx in trace_functions_graph.c
this_cpu: Use this_cpu_xx for ftrace
this_cpu: Use this_cpu_xx in nmi handling
this_cpu: Use this_cpu operations in RCU
this_cpu: Use this_cpu ops for VM statistics
...
Fix up trivial (famous last words) global per-cpu naming conflicts in
arch/x86/kvm/svm.c
mm/slab.c
Fix this warning:
kernel/trace/trace_ksym.c: In function 'ksym_trace_filter_read':
kernel/trace/trace_ksym.c:239: warning: cast to pointer from integer of different size
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: "K.Prasad" <prasad@linux.vnet.ibm.com>
LKML-Reference: <4B1DC578.9020909@cn.fujitsu.com>
[remove the strstrip fix as tglx already fixed that]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
trace_power_start and trace_power_end are used in
arch/x86/kernel/power.c, and this file can't be compiled
as a module, so these two tracepoints don't need to be
exported.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4B1DC55F.7060305@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Like total_profile_count, struct ftrace_event_call::profile_count
is protected by event_mutex, so it doesn't need to be atomic_t.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4B1DC549.5010705@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The buffer for the output is as small as 64 bytes, so it'll
overflow if we add more clock type. Use seq file instead.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4B1DC4FB.5030407@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
# echo 'do_open' > set_graph_function
# echo 'do_open' >> set_graph_function
bash: echo: write error: Invalid argument
Make it valid to write the same value to set_graph_function,
which is consistent with set_ftrace_filter interface.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-reference: <4B1DC4E1.1060303@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
I found a weird behavior:
# echo 'fuse:*' > set_ftrace_filter
bash: echo: write error: Invalid argument
# cat set_ftrace_filter
fuse_dev_fasync
fuse_dev_poll
fuse_copy_do
We should call trace_parser_clear() no matter ftrace_process_regex()
returns 0 or -errno, otherwise we will actually take the unaccepted
records from ftrace_regex_release().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4B1DC4D2.3000406@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Currently it doesn't warn user on invald value:
# echo nonexist_symbol > set_ftrace_filter
or:
# echo 'nonexist_symbol:mod:fuse' > set_ftrace_filter
Better make it return failure.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4B1DC4BF.2070003@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Move the printk from each ftrace_raw_reg_event_foo() to
its caller ftrace_event_enable_disable(). This avoids each
regfunc trace event callbacks to handle a same error report
that can be carried from the caller.
See how much space this saves:
text data bss dec hex filename
5345151 1961864 7103260 14410275 dbe223 vmlinux.o.old
5331487 1961864 7103260 14396611 dbacc3 vmlinux.o
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <4B1DC4AC.802@cn.fujitsu.com>
[start cmdline record before calling regfunc to avoid lost
window of pid to comm resolution]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Call trace_define_common_fields() in event_create_dir() only.
This avoids trace events to handle it from their define_fields
callbacks and shrinks the kernel code size:
text data bss dec hex filename
5346802 1961864 7103260 14411926 dbe896 vmlinux.o.old
5345151 1961864 7103260 14410275 dbe223 vmlinux.o
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <4B1DC49C.8000107@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Use a generic trace_event_raw_init() function for all event's raw_init
callbacks (but kprobes) instead of defining the same version for each
of these.
This shrinks the kernel code:
text data bss dec hex filename
5355293 1961928 7103260 14420481 dc0a01 vmlinux.o.old
5346802 1961864 7103260 14411926 dbe896 vmlinux.o
raw_init can't be removed, because ftrace events and kprobe events
use different raw_init callbacks. Though it's possible to totally
remove raw_init, I choose to leave it as it is for now.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <4B1DC48C.7080603@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: Remove comparing of NULL to va_list in trace_array_vprintk()
tracing: Fix function graph trace_pipe to properly display failed entries
tracing: Add full state to trace_seq
tracing: Buffer the output of seq_file in case of filled buffer
tracing: Only call pipe_close if pipe_close is defined
tracing: Add pipe_close interface
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (57 commits)
x86, perf events: Check if we have APIC enabled
perf_event: Fix variable initialization in other codepaths
perf kmem: Fix unused argument build warning
perf symbols: perf_header__read_build_ids() offset'n'size should be u64
perf symbols: dsos__read_build_ids() should read both user and kernel buildids
perf tools: Align long options which have no short forms
perf kmem: Show usage if no option is specified
sched: Mark sched_clock() as notrace
perf sched: Add max delay time snapshot
perf tools: Correct size given to memset
perf_event: Fix perf_swevent_hrtimer() variable initialization
perf sched: Fix for getting task's execution time
tracing/kprobes: Fix field creation's bad error handling
perf_event: Cleanup for cpu_clock_perf_event_update()
perf_event: Allocate children's perf_event_ctxp at the right time
perf_event: Clean up __perf_event_init_context()
hw-breakpoints: Modify breakpoints without unregistering them
perf probe: Update perf-probe document
perf probe: Support --del option
trace-kprobe: Support delete probe syntax
...
The irqsoff and friends tracers help in finding causes of latency in the
kernel. The also work with the function tracer to show what was happening
when interrupts or preemption are disabled. But the function tracer has
a bit of an overhead and can cause exagerated readings.
Currently, when tracing with /proc/sys/kernel/ftrace_enabled = 0, where the
function tracer is disabled, the information that is provided can end up
being useless. For example, a 2 and a half millisecond latency only showed:
# tracer: preemptirqsoff
#
# preemptirqsoff latency trace v1.1.5 on 2.6.32
# --------------------------------------------------------------------
# latency: 2463 us, #4/4, CPU#2 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:4)
# -----------------
# | task: -4242 (uid:0 nice:0 policy:0 rt_prio:0)
# -----------------
# => started at: _spin_lock_irqsave
# => ended at: remove_wait_queue
#
#
# _------=> CPU#
# / _-----=> irqs-off
# | / _----=> need-resched
# || / _---=> hardirq/softirq
# ||| / _--=> preempt-depth
# |||| /_--=> lock-depth
# |||||/ delay
# cmd pid |||||| time | caller
# \ / |||||| \ | /
hackbenc-4242 2d.... 0us!: trace_hardirqs_off <-_spin_lock_irqsave
hackbenc-4242 2...1. 2463us+: _spin_unlock_irqrestore <-remove_wait_queue
hackbenc-4242 2...1. 2466us : trace_preempt_on <-remove_wait_queue
The above lets us know that hackbench with pid 2463 grabbed a spin lock
somewhere and enabled preemption at remove_wait_queue. This helps a little
but where this actually happened is not informative.
This patch adds the stack dump to the end of the irqsoff tracer. This provides
the following output:
hackbenc-4242 2d.... 0us!: trace_hardirqs_off <-_spin_lock_irqsave
hackbenc-4242 2...1. 2463us+: _spin_unlock_irqrestore <-remove_wait_queue
hackbenc-4242 2...1. 2466us : trace_preempt_on <-remove_wait_queue
hackbenc-4242 2...1. 2467us : <stack trace>
=> sub_preempt_count
=> _spin_unlock_irqrestore
=> remove_wait_queue
=> free_poll_entry
=> poll_freewait
=> do_sys_poll
=> sys_poll
=> system_call_fastpath
Now we see that the culprit of this latency was the free_poll_entry code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I've been asked a few times about how to find out what is calling
some location in the kernel. One way is to use dynamic function tracing
and implement the func_stack_trace. But this only finds out who is
calling a particular function. It does not tell you who is calling
that function and entering a specific if conditional.
I have myself implemented a quick version of trace_dump_stack() for
this purpose a few times, and just needed it now. This is when I realized
that this would be a good tool to have in the kernel like trace_printk().
Using trace_dump_stack() is similar to dump_stack() except that it
writes to the trace buffer instead and can be used in critical locations.
For example:
@@ -5485,8 +5485,12 @@ need_resched_nonpreemptible:
if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) {
if (unlikely(signal_pending_state(prev->state, prev)))
prev->state = TASK_RUNNING;
- else
+ else {
deactivate_task(rq, prev, 1);
+ trace_printk("Deactivating task %s:%d\n",
+ prev->comm, prev->pid);
+ trace_dump_stack();
+ }
switch_count = &prev->nvcsw;
}
Produces:
<...>-3249 [001] 296.105269: schedule: Deactivating task ntpd:3249
<...>-3249 [001] 296.105270: <stack trace>
=> schedule
=> schedule_hrtimeout_range
=> poll_schedule_timeout
=> do_select
=> core_sys_select
=> sys_select
=> system_call_fastpath
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
While using an application that does splice on the ftrace ring
buffer at start up, I triggered an integrity check failure.
Looking into this, I discovered that resizing the buffer performs
an integrity check after the buffer is resized. This check unfortunately
is preformed after it releases the reader lock. If a reader is
reading the buffer it may cause the integrity check to trigger a
false failure.
This patch simply moves the integrity checker under the protection
of the ring buffer reader lock.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There was a comment in the ring buffer code that says the calling
layers should prevent tracing or reading of the ring buffer while
resizing. I have discovered that the tracers do not honor this
arrangement.
This patch moves the disabling and synchronizing the ring buffer to
a higher layer during resizing. This guarantees that no writes
are occurring while the resize takes place.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
strstrip returns a pointer to the first non space character, but the
code in parse_ksym_trace_str() ignores that.
strstrip is now must_check and therefor we get the correct warning:
kernel/trace/trace_ksym.c:294: warning:
ignoring return value of ‘strstrip’, declared with attribute warn_unused_result
We are really not interested in leading whitespace here.
Fix that and cleanup the dozen kfree() exit pathes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Olof Johansson stated the following:
Comparing a va_list with NULL is bogus. It's supposed to be treated like
an opaque type and only be manipulated with va_* accessors.
Olof noticed that this code broke the ARM builds:
kernel/trace/trace.c: In function 'trace_array_vprintk':
kernel/trace/trace.c:1364: error: invalid operands to binary == (have 'va_list' and 'void *')
kernel/trace/trace.c: In function 'tracing_mark_write':
kernel/trace/trace.c:3349: error: incompatible type for argument 3 of 'trace_vprintk'
This patch partly reverts c13d2f7c32 and
re-installs the original mark_printk() mechanism.
Reported-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
LKML-Reference: <4B1BAB74.104@osadl.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There is a case where the graph tracer might get confused and omits
displaying of a single record. This applies mostly with the trace_pipe
since it is unlikely that the trace_seq buffer will overflow with the
trace file.
As the function_graph tracer goes through the trace entries keeping a
pointer to the current record:
current -> func1 ENTRY
func2 ENTRY
func2 RETURN
func1 RETURN
When an function ENTRY is encountered, it moves the pointer to the
next entry to check if the function is a nested or leaf function.
func1 ENTRY
current -> func2 ENTRY
func2 RETURN
func1 RETURN
If the rest of the writing of the function fills the trace_seq buffer,
then the trace_pipe read will ignore this entry. The next read will
Now start at the current location, but the first entry (func1) will
be discarded.
This patch keeps a copy of the current entry in the iterator private
storage and will keep track of when the trace_seq buffer fills. When
the trace_seq buffer fills, it will reuse the copy of the entry in the
next iteration.
[
This patch has been largely modified by Steven Rostedt in order to
clean it up and simplify it. The original idea and concept was from
Jirka and for that, this patch will go under his name to give him
the credit he deserves. But because this was modify by Steven Rostedt
anything wrong with the patch should be blamed on Steven.
]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259067458-27143-1-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_seq buffer might fill up, and right now one needs to check the
return value of each printf into the buffer to check for that.
Instead, have the buffer keep track of whether it is full or not, and
reject more input if it is full or would have overflowed with an input
that wasn't added.
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the seq_read fills the buffer it will call s_start again on the next
itertation with the same position. This causes a problem with the
function_graph tracer because it consumes the iteration in order to
determine leaf functions.
What happens is that the iterator stores the entry, and the function
graph plugin will look at the next entry. If that next entry is a return
of the same function and task, then the function is a leaf and the
function_graph plugin calls ring_buffer_read which moves the ring buffer
iterator forward (the trace iterator still points to the function start
entry).
The copying of the trace_seq to the seq_file buffer will fail if the
seq_file buffer is full. The seq_read will not show this entry.
The next read by userspace will cause seq_read to again call s_start
which will reuse the trace iterator entry (the function start entry).
But the function return entry was already consumed. The function graph
plugin will think that this entry is a nested function and not a leaf.
To solve this, the trace code now checks the return status of the
seq_printf (trace_print_seq). If the writing to the seq_file buffer
fails, we set a flag in the iterator (leftover) and we do not reset
the trace_seq buffer. On the next call to s_start, we check the leftover
flag, and if it is set, we just reuse the trace_seq buffer and do not
call into the plugin print functions.
Before this patch:
2) | fput() {
2) | __fput() {
2) 0.550 us | inotify_inode_queue_event();
2) | __fsnotify_parent() {
2) 0.540 us | inotify_dentry_parent_queue_event();
After the patch:
2) | fput() {
2) | __fput() {
2) 0.550 us | inotify_inode_queue_event();
2) 0.548 us | __fsnotify_parent();
2) 0.540 us | inotify_dentry_parent_queue_event();
[
Updated the patch to fix a missing return 0 from the trace_print_seq()
stub when CONFIG_TRACING is disabled.
Reported-by: Ingo Molnar <mingo@elte.hu>
]
Reported-by: Jiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This fixes a cut and paste error that had pipe_close get called
if pipe_open was defined (not pipe_close).
Reported-by: Kosaki Motohiro <kosaki.motohiro@jp.fujitsu.com>
LKML-Reference: <20091209153204.F4CD.A69D9226@jp.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When we define the common event fields in kprobe, we invert the error
handling and return immediately in case of success. Then we omit
to define specific kprobes fields (ip and nargs), and specific
kretprobes fields (func, ret_ip, nargs). And we only define them
when we fail to create common fields.
The most visible consequence is that we can't create filter for
k(ret)probes specific fields.
This patch re-invert the success/error handling to fix it.
Reported-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1260263815-5167-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
An ftrace plugin can add a pipe_open interface when the user opens
trace_pipe. But if the plugin allocates something within the pipe_open
it can not free it because there exists no pipe_close. The hook to
the trace file open has a corresponding close. The closing of the
trace_pipe file should also have a corresponding close.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
struct perf_event::event callback was called when a breakpoint
triggers. But this is a rather opaque callback, pretty
tied-only to the breakpoint API and not really integrated into perf
as it triggers even when we don't overflow.
We prefer to use overflow_handler() as it fits into the perf events
rules, being called only when we overflow.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (40 commits)
tracing: Separate raw syscall from syscall tracer
ring-buffer-benchmark: Add parameters to set produce/consumer priorities
tracing, function tracer: Clean up strstrip() usage
ring-buffer benchmark: Run producer/consumer threads at nice +19
tracing: Remove the stale include/trace/power.h
tracing: Only print objcopy version warning once from recordmcount
tracing: Prevent build warning: 'ftrace_graph_buf' defined but not used
ring-buffer: Move access to commit_page up into function used
tracing: do not disable interrupts for trace_clock_local
ring-buffer: Add multiple iterations between benchmark timestamps
kprobes: Sanitize struct kretprobe_instance allocations
tracing: Fix to use __always_unused attribute
compiler: Introduce __always_unused
tracing: Exit with error if a weak function is used in recordmcount.pl
tracing: Move conditional into update_funcs() in recordmcount.pl
tracing: Add regex for weak functions in recordmcount.pl
tracing: Move mcount section search to front of loop in recordmcount.pl
tracing: Fix objcopy revision check in recordmcount.pl
tracing: Check absolute path of input file in recordmcount.pl
tracing: Correct the check for number of arguments in recordmcount.pl
...
After duplications are removed, syscall_name_to_nr() is unused.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D2A6.6060803@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
use only one prof_sysenter_enable() instead of
prof_sysenter_enable_##sname()
use only one prof_sysenter_disable() instead of
prof_sysenter_disable_##sname()
use only one prof_sysexit_enable() instead of
prof_sysexit_enable_##sname()
use only one prof_sysexit_disable() instead of
prof_sysexit_disable_##sname()
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D2A1.8060304@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
use only one init_syscall_trace instead of
many init_enter_##sname()/init_exit_##sname()
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D29B.6090708@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add syscall_nr field to struct syscall_metadata,
it helps us to get syscall number easier.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D293.6090800@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
use ->enter_event->id instead of ->enter_id
use ->exit_event->id instead of ->exit_id
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D288.7030001@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Set event_enter_##sname->data to its metadata,
it makes codes simpler.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B14D282.7050709@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix a memory leak case in create_trace_probe(). When an argument
is too long (> MAX_ARGSTR_LEN), it just jumps to error path. In
that case tp->args[i].name is not released.
This also fixes a bug to check kstrdup()'s return value.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091201001919.10235.56455.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
"symbol_name+0" is not so friendly.
It makes the output longer.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0CEBCB.7080309@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Sometimes the group name is not "kprobes",
It'll be better if we can read it from tracing/kprobe_events.
# echo 'r:laijs/vfs_read vfs_read %ax' > kprobe_events
# cat kprobe_events
r:laijs/vfs_read vfs_read %ax=%ax
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0CEBAF.6000104@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
tp->nr_args is not set before we "goto error",
it causes memory leak for free_trace_probe() use tp->nr_args
to free memory of args.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0CEB95.2060107@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Field syscall number is missed in syscall_enter_define_fields()/
syscall_exit_define_fields().
Syscall number is also needed for event filter or other users.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4B0E330D.1070206@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Kernel breakpoints are created using functions in which we pass
breakpoint parameters as individual variables: address, length
and type.
Although it fits well for x86, this just does not scale across
architectures that may support this api later as these may have
more or different needs. Pass in a perf_event_attr structure
instead because it is meant to evolve as much as possible into
a generic hardware breakpoint parameter structure.
Reported-by: K.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259294154-5197-2-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This simplifies the error handling when we create a breakpoint.
We don't need to check the NULL return value corner case anymore
since we have improved perf_event_create_kernel_counter() to
always return an error code in the failure case.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1259210142-5714-3-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The error path of a breakpoint modification is broken in
the ksym tracer. A modified breakpoint hlist node is immediately
released after its removal. Also we leak a breakpoint in this
case.
Fix the path.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1259210142-5714-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Running the ring-buffer-benchmark's threads at the lowest priority may
work well for keeping it in the background, but it is not appropriate
for the benchmarks.
This patch adds 4 parameters to the module:
consumer_fifo
consumer_nice
producer_fifo
producer_nice
By default the consumer and producer still run at nice +19.
If the *_fifo options are set, they will override the *_nice values.
modprobe ring_buffer_benchmark consumer_nice=0 producer_fifo=10
The above will set the consumer thread to a nice value of 0, and
the producer thread to a RT SCHED_FIFO priority of 10.
Note, this patch also fixes a bug where calling set_user_nice on the
consumer thread would oops the kernel when the parameter "disable_reader"
is set.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit ee949a86b3 ("tracing/syscalls:
Use long for syscall ret format and field definitions") changed the
syscall exit return type to long, but forgot to change it in the
struct.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259133299-23594-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make perf_swevent_get_recursion_context return a context number
and disable preemption.
This could be used to remove the IRQ disable from the trace bit
and index the per-cpu buffer with.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091123103819.993226816@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Clean up strstrip() usage - which also addresses this build warning:
kernel/trace/ftrace.c: In function 'ftrace_pid_write':
kernel/trace/ftrace.c:3004: warning: ignoring return value of 'strstrip', declared with attribute warn_unused_result
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The ring-buffer benchmark threads run on nice 0 by default, using
up a lot of CPU time and slowing down the system:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1024 root 20 0 0 0 0 D 95.3 0.0 4:01.67 rb_producer
1023 root 20 0 0 0 0 R 93.5 0.0 2:54.33 rb_consumer
21569 mingo 40 0 14852 1048 772 R 3.6 0.1 0:00.05 top
1 root 40 0 4080 928 668 S 0.0 0.0 0:23.98 init
Renice them to +19 to make them less intrusive.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We are never in an NMI context when we commit a syscall trace to
perf. So just forget about the nmi buffer there.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <1258863695-10464-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we commit a trace to perf, we first check if we are
recursing in the same buffer so that we don't mess-up the buffer
with a recursing trace. But later on, we do the same check from
perf to avoid commit recursion. The recursion check is desired
early before we touch the buffer but we want to do this check
only once.
Then export the recursion protection from perf and use it from
the trace events before submitting a trace.
v2: Put appropriate Reported-by tag
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <1258864015-10579-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
arch/x86/kernel/kprobes.c
kernel/trace/Makefile
Merge reason: hw-breakpoints perf integration is looking
good in testing and in reviews, plus conflicts
are mounting up - so merge & resolve.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Prevent build warning when CONFIG_FUNCTION_GRAPH_TRACER is not set.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4AF24381.5060307@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a string was written to <debugfs>/tracing/trace_marker, some
strange characters appeared in the trace output instead of the
string, since a vprint function erroneously called a vararg print
function with a va_list argument. This patch fixes the problem and
simplifies the related code.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
LKML-Reference: <4B01AE5D.1010801@osadl.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the change of the way we process commits. Where a commit only happens
at the outer most level, and that we don't need to worry about
a commit ending after the rb_start_commit() has been called, the code
use to grab the commit page before the tail page to prevent a possible
race. But this race no longer exists with the rb_start_commit()
rb_end_commit() interface.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Disabling interrupts in trace_clock_local takes quite a performance
hit to the recording of traces. Using perf top we see:
------------------------------------------------------------------------------
PerfTop: 244 irqs/sec kernel:100.0% [1000Hz cpu-clock-msecs], (all, 4 CPUs)
------------------------------------------------------------------------------
samples pcnt kernel function
_______ _____ _______________
2842.00 - 40.4% : trace_clock_local
1043.00 - 14.8% : rb_reserve_next_event
784.00 - 11.1% : ring_buffer_lock_reserve
600.00 - 8.5% : __rb_reserve_next
579.00 - 8.2% : rb_end_commit
440.00 - 6.3% : ring_buffer_unlock_commit
290.00 - 4.1% : ring_buffer_producer_thread [ring_buffer_benchmark]
155.00 - 2.2% : debug_smp_processor_id
117.00 - 1.7% : trace_recursive_unlock
103.00 - 1.5% : ring_buffer_event_data
28.00 - 0.4% : do_gettimeofday
22.00 - 0.3% : _spin_unlock_irq
14.00 - 0.2% : native_read_tsc
11.00 - 0.2% : getnstimeofday
Where trace_clock_local is 40% of the tracing, and the time for recording
a trace according to ring_buffer_benchmark is 210ns. After converting
the interrupts to preemption disabling we have from perf top:
------------------------------------------------------------------------------
PerfTop: 1084 irqs/sec kernel:99.9% [1000Hz cpu-clock-msecs], (all, 4 CPUs)
------------------------------------------------------------------------------
samples pcnt kernel function
_______ _____ _______________
1277.00 - 16.8% : native_read_tsc
1148.00 - 15.1% : rb_reserve_next_event
896.00 - 11.8% : ring_buffer_lock_reserve
688.00 - 9.1% : __rb_reserve_next
664.00 - 8.8% : rb_end_commit
563.00 - 7.4% : ring_buffer_unlock_commit
508.00 - 6.7% : _spin_unlock_irq
365.00 - 4.8% : debug_smp_processor_id
321.00 - 4.2% : trace_clock_local
303.00 - 4.0% : ring_buffer_producer_thread [ring_buffer_benchmark]
273.00 - 3.6% : native_sched_clock
122.00 - 1.6% : trace_recursive_unlock
113.00 - 1.5% : sched_clock
101.00 - 1.3% : ring_buffer_event_data
53.00 - 0.7% : tick_nohz_stop_sched_tick
Where trace_clock_local drops from 40% to only taking 4% of the total time.
The trace time also goes from 210ns down to 179ns (31ns).
I talked with Peter Zijlstra about the impact that sched_clock may have
without having interrupts disabled, and he told me that if a timer interrupt
comes in, sched_clock may report a wrong time.
Balancing a seldom incorrect timestamp with a 15% performance boost, I'll
take the performance boost.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring_buffer_benchmark does a gettimeofday after every write to the
ring buffer in its measurements. This adds the overhead of the call
to gettimeofday to the measurements and does not give an accurate picture
of the length of time it takes to record a trace.
This was first noticed with perf top:
------------------------------------------------------------------------------
PerfTop: 679 irqs/sec kernel:99.9% [1000Hz cpu-clock-msecs], (all, 4 CPUs)
------------------------------------------------------------------------------
samples pcnt kernel function
_______ _____ _______________
1673.00 - 27.8% : trace_clock_local
806.00 - 13.4% : do_gettimeofday
590.00 - 9.8% : rb_reserve_next_event
554.00 - 9.2% : native_read_tsc
431.00 - 7.2% : ring_buffer_lock_reserve
365.00 - 6.1% : __rb_reserve_next
355.00 - 5.9% : rb_end_commit
322.00 - 5.4% : getnstimeofday
268.00 - 4.5% : ring_buffer_unlock_commit
262.00 - 4.4% : ring_buffer_producer_thread [ring_buffer_benchmark]
113.00 - 1.9% : read_tsc
91.00 - 1.5% : debug_smp_processor_id
69.00 - 1.1% : trace_recursive_unlock
66.00 - 1.1% : ring_buffer_event_data
25.00 - 0.4% : _spin_unlock_irq
And the length of each write to the ring buffer measured at 310ns.
This patch adds a new module parameter called "write_interval" which is
defaulted to 50. This is the number of writes performed between
timestamps. After this patch perf top shows:
------------------------------------------------------------------------------
PerfTop: 244 irqs/sec kernel:100.0% [1000Hz cpu-clock-msecs], (all, 4 CPUs)
------------------------------------------------------------------------------
samples pcnt kernel function
_______ _____ _______________
2842.00 - 40.4% : trace_clock_local
1043.00 - 14.8% : rb_reserve_next_event
784.00 - 11.1% : ring_buffer_lock_reserve
600.00 - 8.5% : __rb_reserve_next
579.00 - 8.2% : rb_end_commit
440.00 - 6.3% : ring_buffer_unlock_commit
290.00 - 4.1% : ring_buffer_producer_thread [ring_buffer_benchmark]
155.00 - 2.2% : debug_smp_processor_id
117.00 - 1.7% : trace_recursive_unlock
103.00 - 1.5% : ring_buffer_event_data
28.00 - 0.4% : do_gettimeofday
22.00 - 0.3% : _spin_unlock_irq
14.00 - 0.2% : native_read_tsc
11.00 - 0.2% : getnstimeofday
do_gettimeofday dropped from 13% usage to a mere 0.4%! (using the default
50 interval) The measurement for each timestamp went from 310ns to 210ns.
That's 100ns (1/3rd) overhead that the gettimeofday call was introducing.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracing_stats_read() mistakenly returns ENOMEM instead
of the negative value -ENOMEM.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
LKML-Reference: <4AFB2C0B.50605@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
All of the infrastructure already exists to support read accesses
for platforms that support a read access independently of read/write
(such as in the case of the SuperH UBC). This just trivially hooks
up the read case by itself.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
LKML-Reference: <20091109083733.GA25848@linux-sh.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The macro used to be used in both trace_selftest.c and
trace_ksym.c, but no longer, so remove it from header file.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
This patch rebase the implementation of the breakpoints API on top of
perf events instances.
Each breakpoints are now perf events that handle the
register scheduling, thread/cpu attachment, etc..
The new layering is now made as follows:
ptrace kgdb ftrace perf syscall
\ | / /
\ | / /
/
Core breakpoint API /
/
| /
| /
Breakpoints perf events
|
|
Breakpoints PMU ---- Debug Register constraints handling
(Part of core breakpoint API)
|
|
Hardware debug registers
Reasons of this rewrite:
- Use the centralized/optimized pmu registers scheduling,
implying an easier arch integration
- More powerful register handling: perf attributes (pinned/flexible
events, exclusive/non-exclusive, tunable period, etc...)
Impact:
- New perf ABI: the hardware breakpoints counters
- Ptrace breakpoints setting remains tricky and still needs some per
thread breakpoints references.
Todo (in the order):
- Support breakpoints perf counter events for perf tools (ie: implement
perf_bpcounter_event())
- Support from perf tools
Changes in v2:
- Follow the perf "event " rename
- The ptrace regression have been fixed (ptrace breakpoint perf events
weren't released when a task ended)
- Drop the struct hw_breakpoint and store generic fields in
perf_event_attr.
- Separate core and arch specific headers, drop
asm-generic/hw_breakpoint.h and create linux/hw_breakpoint.h
- Use new generic len/type for breakpoint
- Handle off case: when breakpoints api is not supported by an arch
Changes in v3:
- Fix broken CONFIG_KVM, we need to propagate the breakpoint api
changes to kvm when we exit the guest and restore the bp registers
to the host.
Changes in v4:
- Drop the hw_breakpoint_restore() stub as it is only used by KVM
- EXPORT_SYMBOL_GPL hw_breakpoint_restore() as KVM can be built as a
module
- Restore the breakpoints unconditionally on kvm guest exit:
TIF_DEBUG_THREAD doesn't anymore cover every cases of running
breakpoints and vcpu->arch.switch_db_regs might not always be
set when the guest used debug registers.
(Waiting for a reliable optimization)
Changes in v5:
- Split-up the asm-generic/hw-breakpoint.h moving to
linux/hw_breakpoint.h into a separate patch
- Optimize the breakpoints restoring while switching from kvm guest
to host. We only want to restore the state if we have active
breakpoints to the host, otherwise we don't care about messed-up
address registers.
- Add asm/hw_breakpoint.h to Kbuild
- Fix bad breakpoint type in trace_selftest.c
Changes in v6:
- Fix wrong header inclusion in trace.h (triggered a build
error with CONFIG_FTRACE_SELFTEST
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
While tracing using events with perf, if one enables the
lockdep:lock_acquire event, it will infect every other perf
trace events.
Basically, you can enable whatever set of trace events through
perf but if this event is part of the set, the only result we
can get is a long list of lock_acquire events of rcu read lock,
and only that.
This is because of a recursion inside perf.
1) When a trace event is triggered, it will fill a per cpu
buffer and submit it to perf.
2) Perf will commit this event but will also protect some data
using rcu_read_lock
3) A recursion appears: rcu_read_lock triggers a lock_acquire
event that will fill the per cpu event and then submit the
buffer to perf.
4) Perf detects a recursion and ignores it
5) Perf continues its work on the previous event, but its buffer
has been overwritten by the lock_acquire event, it has then
been turned into a lock_acquire event of rcu read lock
Such scenario also happens with lock_release with
rcu_read_unlock().
We could turn the rcu_read_lock() into __rcu_read_lock() to drop
the lock debugging from perf fast path, but that would make us
lose the rcu debugging and that doesn't prevent from other
possible kind of recursion from perf in the future.
This patch adds a recursion protection based on a counter on the
perf trace per cpu buffers to solve the problem.
-v2: Fixed lost whitespace, added reviewed-by tag
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <1257477185-7838-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rename Kprobes-based event tracer to kprobes-based tracing event
(kprobe-event), since it is not a tracer but an extensible
tracing event interface.
This also changes CONFIG_KPROBE_TRACER to CONFIG_KPROBE_EVENT
and sets it y by default.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091104001247.3454.14131.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
tools/perf/Makefile
Merge reason: Resolve the conflict, merge to upstream and merge in
perf fixes so we can add a dependent patch.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When a command is passed to the set_ftrace_filter, then
the ftrace_regex_lock is still held going back to user space.
# echo 'do_open : foo' > set_ftrace_filter
(still holding ftrace_regex_lock when returning to user space!)
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AEF7F8A.3080300@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We got a sudden panic when we reduced the size of the
ringbuffer.
We can reproduce the panic by the following steps:
echo 1 > events/sched/enable
cat trace_pipe > /dev/null &
while ((1))
do
echo 12000 > buffer_size_kb
echo 512 > buffer_size_kb
done
(not more than 5 seconds, panic ...)
Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4AF01735.9060409@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
____ftrace_check_##name() is used for compile-time check on
F_printk() only, so it should be marked as __unused instead
of __used.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4AEE2D01.4010305@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that the return from alloc_percpu is compatible with the address
of per-cpu vars, it makes sense to hand around the address of per-cpu
variables. To make this sane, we remove the per_cpu__ prefix we used
created to stop people accidentally using these vars directly.
Now we have sparse, we can use that (next patch).
tj: * Updated to convert stuff which were missed by or added after the
original patch.
* Kill per_cpu_var() macro.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
This patch updates percpu related symbols in kernel tracer such that
percpu symbols are unique and don't clash with local symbols. This
serves two purposes of decreasing the possibility of global percpu
symbol collision and allowing dropping per_cpu__ prefix from percpu
symbols.
* kernel/trace/trace.c: s/max_data/max_tr_data/
* kernel/trace/trace_hw_branches: s/tracer/hwb_tracer/, s/buffer/hwb_buffer/
Partly based on Rusty Russell's "alloc_percpu: rename percpu vars
which cause name clashes" patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Fix find_probe_event() to compare both of event-name and
event-group. Without this fix, kprobe-tracer overwrites existing
same event-name probe even if its group-name is different.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091027204244.30545.27516.stgit@harusame>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The cpu argument is not used inside the rb_time_stamp() function.
Plus fix a typo.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091023233647.118547500@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Trivial patch to fix a documentation example and to fix a
comment.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091023233646.871719877@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
trace_seq_printf() return value is a little ambiguous. It
currently returns the length of the space available in the
buffer. printf usually returns the amount written. This is not
adequate here, because:
trace_seq_printf(s, "");
is perfectly legal, and returning 0 would indicate that it
failed.
We can always see the amount written by looking at the before
and after values of s->len. This is not quite the same use as
printf. We only care if the string was successfully written to
the buffer or not.
Make trace_seq_printf() return 0 if the trace oversizes the
buffer's free space, 1 otherwise.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091023233646.631787612@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Instead of directly updating filp->f_pos we should update the *ppos
argument. The filp->f_pos gets updated within the file_pos_write()
function called from sys_write().
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091023233646.399670810@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
tools/perf/Makefile
Merge reason:
- fix the conflict
- pick up the pr_*() infrastructure to queue up dependent patch
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
kernel/Makefile
kernel/trace/Makefile
kernel/trace/trace.h
samples/Makefile
Merge reason: We need to be uptodate with the perf events development
branch because we plan to rewrite the breakpoints API on top of
perf events.
Américo Wang noticed that we have a locking imbalance in the
error paths of ftrace_profile_set_filter(), causing potential
leakage of event_mutex.
Also clean up other error codepaths related to event_mutex
while at it.
Plus fix an initialized variable in the subsystem filter code.
Reported-by: Américo Wang <xiyou.wangcong@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <2375c9f90910150247u5ccb8e2at58c764e385ffa490@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- Add an ioctl to allocate a filter for a perf event.
- Free the filter when the associated perf event is to be freed.
- Do the filtering in perf_swevent_match().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69546.8050401@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
"==" will always do a full match, and "~" will do a glob match.
In the future, we may add "=~" for regex match.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69528.3050309@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change:
for_each_pred
for_each_subsystem
To:
for_each_subsystem
for_each_pred
This change also prepares for later patches.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4AD69502.8060903@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge reason: to add event filter support we need the following
commits from the tracing tree:
3f6fe06: tracing/filters: Unify the regex parsing helpers
1889d20: tracing/filters: Provide basic regex support
737f453: tracing/filters: Cleanup useless headers
Signed-off-by: Ingo Molnar <mingo@elte.hu>
set_cmdline_ftrace is a better match against what does this function:
apply a tracer name from the kernel command line.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
We are using strncpy in the wrong way to copy the ftrace_graph_filter
boot param because we pass the buffer size instead of the max string
size it can contain (buffer size - 1). The end result might not be
NULL terminated as we are abusing the max string size.
Lets use strlcpy() instead.
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Most of the syscalls metadata processing is done from arch.
But these operations are mostly generic accross archs. Especially now
that we have a common variable name that expresses the number of
syscalls supported by an arch: NR_syscalls, the only remaining bits
that need to reside in arch is the syscall nr to addr translation.
v2: Compare syscalls symbols only after the "sys" prefix so that we
avoid spurious mismatches with archs that have syscalls wrappers,
in which case syscalls symbols have "SyS" prefixed aliases.
(Reported by: Heiko Carstens)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
I was debuging some module using "function" and "function_graph"
tracers and noticed, that if you load module after you enabled
tracing, the module's hooks will convert only to NOP instructions.
The attached patch enables modules' hooks if there's function trace
allready on, thus allowing to trace module functions.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20091013203425.896285120@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
ftrace_cpu_disabled usage in trace_functions_graph.c were left out
during this_cpu_xx conversion in commit 9288f99a causing compile
failure. Convert them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christoph Lameter <cl@linux-foundation.org>
Remove the ftrace_trace_addr() function as only its off-case is
implemented and there are no users of it currently.
But we keep ftrace_graph_addr() off-case, in case someone come to use
the function graph tracer to profit from top-level callers filtering.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Do this rename because set_ftrace is too much generic and not enough
self-explainable as a name.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Every time we set a filter, we leak memory allocated by
postfix_append_operand() and postfix_append_op().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: <stable@kernel.org> # for v2.6.31.x
LKML-Reference: <4AD3D7D9.4070400@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rename probe-common fixed field names to harder conflictable names,
because current 'ip', 'func', and other probe field names are easily in
conflict with user-specified variable names.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
LKML-Reference: <20091007222814.1684.407.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Check whether the argument name is in conflict with other field names
while creating a kprobe through the debugfs interface.
Changes in v3:
- Check strcmp() == 0 instead of !strcmp().
Changes in v2:
- Add common_lock_depth to reserved name list.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
LKML-Reference: <20091007222807.1684.26880.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Rename special variables to more self-explainable names as below:
- $rv to $retval
- $sa to $stack
- $aN to $argN
- $sN to $stackN
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
LKML-Reference: <20091007222759.1684.3319.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add a command line parameter to allow limiting the function graphs
that are traced on boot up from the given top-level callers , when
ftrace=function_graph is specified.
This patch adds the following command line option:
ftrace_graph_filter=function-list
Where function-list is a comma separated list of functions to filter.
[fweisbec@gmail.com: picked the documentation changes from the v2 patch]
Signed-off-by: Stefan Assmann <sassmann@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4AD2DEB9.2@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Remove '$ra' (return address) because it is already shown at the head of
each entry.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
LKML-Reference: <20091007222748.1684.12711.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add $ prefix to the special variables(e.g. sa, rv) of kprobe-tracer.
This resolves consistency issues between kprobe_events and perf-kprobe.
The main goal is to avoid conflicts between local variable names of
probed functions, used by perf probe, and special variables used
in the kprobe event creation interface (stack values, etc...) and
also available from perf probe.
ie: we don't want rv (return value) to conflict with a local variable
named rv in a probed function.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
LKML-Reference: <20091007222740.1684.91170.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
this_cpu_xx can reduce the instruction count here and also
avoid address arithmetic.
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Tejun Heo <tj@kernel.org>
The addition of trace_array_{v}printk used the wrong function for
trace_vprintk to call. This broke trace_marker and trace_vprintk
itself. Although trace_printk may not have been affected by those
that end up calling trace_vbprintk.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: user local buffer variable for trace branch tracer
tracing: fix warning on kernel/trace/trace_branch.c andtrace_hw_branches.c
ftrace: check for failure for all conversions
tracing: correct module boundaries for ftrace_release
tracing: fix transposed numbers of lock_depth and preempt_count
trace: Fix missing assignment in trace_ctxwake_*
tracing: Use free_percpu instead of kfree
tracing: Check total refcount before releasing bufs in profile_enable failure
* 'perf-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf_events: Make ABI definitions available to userspace
perf tools: elf_sym__is_function() should accept "zero" sized functions
tracing/syscalls: Use long for syscall ret format and field definitions
perf trace: Update eval_flag() flags array to match interrupt.h
perf trace: Remove unused code in builtin-trace.c
perf: Propagate term signal to child
Just using the tr->buffer for the API to trace_buffer_lock_reserve
is not good enough. This is because the tr->buffer may change, and we
do not want to commit with a different buffer that we reserved from.
This patch uses a local variable to hold the buffer that was used to
reserve and commit with.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
fix warnings that caused the API change of trace_buffer_lock_reserve()
change files: kernel/trace/trace_hw_branch.c
kernel/trace/trace_branch.c
Signed-off-by: Zhenwen Xu <helight.xu@gmail.com>
LKML-Reference: <20091008012146.GA4170@helight>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Due to legacy code from back when the dynamic tracer used a daemon,
only core kernel code was checking for failures. This is no longer
the case. We must check for failures any time we perform text modifications.
Cc: stable@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the module is about the unload we release its call records.
The ftrace_release function was given wrong values representing
the module core boundaries, thus not releasing its call records.
Plus making ftrace_release function module specific.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1254934835-363-3-git-send-email-jolsa@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The sign info used for filters in the kernel is also useful to
applications that process the trace stream. Add it to the format
files and make it available to userspace.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: rostedt@goodmis.org
Cc: lizf@cn.fujitsu.com
Cc: hch@infradead.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1254809398-8078-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The state char variable S should be reassigned, if S == 0.
We are missing the state of the task that is going to sleep for the
context switch events (in the raw mode).
Fortunately the problem arises with the sched_switch/wake_up
tracers, not the sched trace events.
The formers are legacy now. But still, that was buggy.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4AC43118.6050409@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The syscall event definitions use long for the syscall exit ret
value, but unsigned long for the same thing in the format and field
definitions. Change them all to long.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: rostedt@goodmis.org
Cc: lizf@cn.fujitsu.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1254808849-7829-4-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
kmemtrace: Fix up tracer registration
tracing: Fix infinite recursion in ftrace_update_pid_func()
In the event->profile_enable() failure path, we release the per cpu
buffers using kfree which is wrong because they are per cpu pointers.
Although free_percpu only wraps kfree for now, that may change in the
future so lets use the correct way.
Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
When we call the profile_enable() callback of an event, we release the
shared perf event tracing buffers unconditionnaly in the failure path.
This is wrong because there may be other users of these. Then check the
total refcount before doing this.
Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Check result of event_create_dir() and add ftrace_event_call to
ftrace_events list only if it is succeeded. Thanks to Li for pointing
it out.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090925182054.10157.55219.stgit@omoto>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Use new percpu global event buffer instead of stack in kprobe
tracer while tracing through perf.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090925182011.10157.60140.stgit@omoto>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Since 2.6.31 now has request-based device-mapper, it's useful to have
a tracepoint for request-remapping as well as bio-remapping.
This patch adds a tracepoint for request-remapping, trace_block_rq_remap().
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Commit ddc1637af2 ("kmemtrace: Print
binary output only if 'bin' option is set") ended up inverting the
error detection logic. register_tracer() returns 0 on success,
which this change caused to treat as an error, resulting in:
[ 0.132000] Warning: could not register the kmem tracer
as well as bailing out of the initcall with an error value. This
restores the old logic.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <20090928075540.GD6668@linux-sh.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST is enabled
__ftrace_trace_function contains the current trace function, not
ftrace_trace_function.
In ftrace_update_pid_func() we currently incorrectly assign the
value of ftrace_trace_function to __ftrace_trace_funcion before
returning.
Without this patch it is possible to execute an infinite recursion
whereby ftrace_test_stop_func() calls __ftrace_trace_function,
which was assigned ftrace_test_stop_func() in
ftrace_update_pid_func().
Signed-off-by: Matt Fleming <matthew.fleming@imgtec.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1254152581-18347-1-git-send-email-matt@console-pimps.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
modules, tracing: Remove stale struct marker signature from module_layout()
tracing/workqueue: Use %pf in workqueue trace events
tracing: Fix a comment and a trivial format issue in tracepoint.h
tracing: Fix failure path in ftrace_regex_open()
tracing: Fix failure path in ftrace_graph_write()
tracing: Check the return value of trace_get_user()
tracing: Fix off-by-one in trace_get_user()
The filter code has stolen the regex parsing function from ftrace to
get the regex support.
We have duplicated this code, so factorize it in the filter area and
make it generally available, as the filter code is the most suited to
host this feature.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
This patch provides basic support for regular expressions in filters.
It supports the following types of regexp:
- *match_beginning
- *match_middle*
- match_end*
- !don't match
Example:
cd /debug/tracing/events/bkl/lock_kernel
echo 'file == "*reiserfs*"' > filter
echo 1 > enable
gedit-4941 [000] 457.735437: lock_kernel: depth: 0, fs/reiserfs/namei.c:334 reiserfs_lookup()
sync_supers-227 [001] 461.379985: lock_kernel: depth: 0, fs/reiserfs/super.c:69 reiserfs_sync_fs()
sync_supers-227 [000] 461.383096: lock_kernel: depth: 0, fs/reiserfs/journal.c:1069 flush_commit_list()
reiserfs/1-1369 [001] 461.479885: lock_kernel: depth: 0, fs/reiserfs/journal.c:3509 flush_async_commits()
Every string is now handled as a regexp in the filter framework, which
helps to factorize the code for handling both simple strings and
regexp comparisons.
(The regexp parsing code has been wildly cherry picked from ftrace.c
written by Steve.)
v2: Simplify the whole and drop the filter_regex file
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
It's unused.
It isn't needed -- read or write flag is already passed and sysctl
shouldn't care about the rest.
It _was_ used in two places at arch/frv for some reason.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cleanup the useless dentry variable while creating a kernel
event set of files. trace_create_file() warns if it fails to
create the file anyway, and we don't store the dentry anywhere.
v2: Fix a small conflict in kernel/trace/trace_events.c
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cleanup remaining headers inclusion that were only useful when
the filter framework and its tracing related filesystem user interface
weren't yet separated.
v2: Keep module.h, needed for EXPORT_SYMBOL_GPL
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Remove open-coded zalloc_cpumask_var() and zalloc_cpumask_var_node().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Make all seq_operations structs const, to help mitigate against
revectoring user-triggerable function pointers.
This is derived from the grsecurity patch, although generated from scratch
because it's simpler than extracting the changes from there.
Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
trivial: fix typo in aic7xxx comment
trivial: fix comment typo in drivers/ata/pata_hpt37x.c
trivial: typo in kernel-parameters.txt
trivial: fix typo in tracing documentation
trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c
trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c
trivial: remove unnecessary semicolons
trivial: Fix duplicated word "options" in comment
trivial: kbuild: remove extraneous blank line after declaration of usage()
trivial: improve help text for mm debug config options
trivial: doc: hpfall: accept disk device to unload as argument
trivial: doc: hpfall: reduce risk that hpfall can do harm
trivial: SubmittingPatches: Fix reference to renumbered step
trivial: fix typos "man[ae]g?ment" -> "management"
trivial: media/video/cx88: add __init/__exit macros to cx88 drivers
trivial: fix typo in CONFIG_DEBUG_FS in gcov doc
trivial: fix missing printk space in amd_k7_smp_check
trivial: fix typo s/ketymap/keymap/ in comment
trivial: fix typo "to to" in multiple files
trivial: fix typos in comments s/DGBU/DBGU/
...
Leave the last slot for the tailing '\0'.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4AB865FA.5080801@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'perfcounters-rename-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf: Tidy up after the big rename
perf: Do the big rename: Performance Counters -> Performance Events
perf_counter: Rename 'event' to event_id/hw_event
perf_counter: Rename list_entry -> group_entry, counter_list -> group_list
Manually resolved some fairly trivial conflicts with the tracing tree in
include/trace/ftrace.h and kernel/trace/trace_syscalls.c.
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Simplify sys_sched_rr_get_interval() system call
sched: Fix potential NULL derference of doms_cur
sched: Fix raciness in runqueue_is_locked()
sched: Re-add lost cpu_allowed check to sched_fair.c::select_task_rq_fair()
sched: Remove unneeded indentation in sched_fair.c::place_entity()
this was introduced in
5e0a093 (tracing: fix config options to not show when automatically selected)
Signed-off-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: trivial@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
runqueue_is_locked() is unavoidably racy due to a poor interface design.
It does
cpu = get_cpu()
ret = some_perpcu_thing(cpu);
put_cpu(cpu);
return ret;
Its return value is unreliable.
Fix.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <200909191855.n8JItiko022148@imap1.linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix the following 'make includecheck' warning:
kernel/trace/ring_buffer.c: trace.h is included more than once.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247068617.4382.107.camel@ht.satnam>
Limit the length of a tracer's name within 100 chars, and then we
don't have to play with max_tracer_type_len.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AB32377.9020601@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
No need to store ftrace_graph_funcs in file->private.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AB32364.7020602@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch converts the existing power tracer into an event tracer,
so that power events (C states and frequency changes) can be
tracked via "perf".
This also removes the perl script that was used to demo the tracer;
its functionality is being replaced entirely with timechart.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130542.6d314860@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that the last users of markers have migrated to the event
tracer we can kill off the (now orphan) support code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090917173527.GA1699@lst.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently the trace event profile buffer is allocated in the stack. But
this may be too much for the stack, as the events can have large
statically defined field size and can also grow with dynamic arrays.
Allocate two per cpu buffer for all profiled events. The first cpu
buffer is used to host every non-nmi context traces. It is protected
by disabling the interrupts while writing and committing the trace.
The second buffer is reserved for nmi. So that there is no race between
them and the first buffer.
The whole write/commit section is rcu protected because we release
these buffers while deactivating the last profiling trace event.
v2: Move the buffers from trace_event to be global, as pointed by
Steven Rostedt.
v3: Fix the syscall events to handle the profiling buffer races
by disabling interrupts, now that the buffers are globals.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Factorize the events enabling accounting in a common tracing core
helper. This reduces the size of the profile_enable() and
profile_disable() callbacks for each trace events.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
For direct function pointers (like what mcount provides) PowerPC64
requires the use of %ps, otherwise nothing is printed.
This patch converts all prints of functions retrieved through mcount
to use the %ps format from the %pf.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Disable newly created kprobe events by default, not to disturb
another user using ftrace. "Disturb" means when someone is using
ftrace and another user tries to use perf-tools, (in near
future) if he defines new kprobe event via perf-tools, then new
events will mess up the frace buffer. Fix this to allow proper
and transparent kprobes events concurrent usage between ftrace
users and perf users.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090914204937.18779.59422.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add kprobe_dispatcher and kretprobe_dispatcher to dispatch event
in both profile and tracing handlers.
This allows simultaneous kprobe uses by ftrace and perf.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090914204920.18779.57555.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Lock not only event_mutex but also trace_event_mutex in
trace_remove_event_call() to protect __unregister_ftrace_event().
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090914204912.18779.68734.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Fix trace_probe registration order. ftrace_event_call and ftrace_event
must be registered before kprobe/kretprobe, because tracing/profiling
handlers dereference the event-id.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090914204856.18779.52961.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Support specifying a custom subsystem(group) for each kprobe event.
This allows users to create new group to control several probes
at once, or add events to existing groups as additional tracepoints.
New synopsis:
p[:[subsys/]event-name] KADDR|KSYM[+offs] [ARGS]
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090910235353.22412.15149.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Fix the condition of strcmp for "*".
Also fix NULL pointer dereference when glob is NULL.
Signed-off-by: Atsushi Tsuji <a-tsuji@bk.jp.nec.com>
LKML-Reference: <4AAF6726.5090905@bk.jp.nec.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits)
powerpc64: convert to dynamic percpu allocator
sparc64: use embedding percpu first chunk allocator
percpu: kill lpage first chunk allocator
x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA
percpu: update embedding first chunk allocator to handle sparse units
percpu: use group information to allocate vmap areas sparsely
vmalloc: implement pcpu_get_vm_areas()
vmalloc: separate out insert_vmalloc_vm()
percpu: add chunk->base_addr
percpu: add pcpu_unit_offsets[]
percpu: introduce pcpu_alloc_info and pcpu_group_info
percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward
percpu: add @align to pcpu_fc_alloc_fn_t
percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()
percpu: drop @static_size from first chunk allocators
percpu: generalize first chunk allocator selection
percpu: build first chunk allocators selectively
percpu: rename 4k first chunk allocator to page
percpu: improve boot messages
percpu: fix pcpu_reclaim() locking
...
Fix trivial conflict as by Tejun Heo in kernel/sched.c
The prev_trace_clock_time is only read or written to when the
trace_clock_lock is taken. For better perfomance, they
should share the same cache line.
Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
While implementing function tracer and function tracer graph support,
I found the exact arch implementation details to be a bit lacking
(and my x86 foo ain't great). So after pounding out support for
the Blackfin arch, start documenting the requirements/details.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
LKML-Reference: <1252973415-21264-1-git-send-email-vapier@gentoo.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Parag noticed that the number of event tests has increased tremendously:
grep "Testing event" dmesg.31rc9 |wc -l
100
grep "Testing event" dmesg.31git |wc -l
1172
This is due to the testing of every syscall event when ftrace self
test is enabled. This adds a bit more time to kernel boot up and can
affect development by slowing down the time it takes between reboots.
This option makes the testing of the syscall events into a separate
config, to still be able to test most of ftrace internals at boot up
but not have to wait for all the syscall events to be tested.
The syscall event testing only tests the enabling and disabling of
the trace point, since the syscalls are not executed. What really needs
to be done is to somehow have a userspace tool test the syscall tracepoints
as well.
Reported-by: Parag Warudkar <parag.lkml@gmail.com>
LKML-Reference: <f7848160909130815l3e768a30n3b28808bbe5c254b@mail.gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Make sure F_printk() has corrent format and args, and make sure
changes in F_STRUCT() won't break F_printk().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AADF6CC.1060809@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I found some typos in F_printk(), so I wrote compile-time check
for it, and triggered some compile errors and warnings.
I've fixed them on x86_32, but I have no x86_64 in my hand, so there
may still be some compile warnings on 64bits.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AADF60B.5070407@cn.fujitsu.com>
[ tested on x86_64, and works fine ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some of the generated functions used in the TRACE_EVENT macros are
not declared static, but they are not global.
Discovered by sparse.
Reported-by: Jaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The cmpxchg used by PowerPC does the following:
({ \
__typeof__(*(ptr)) _o_ = (o); \
__typeof__(*(ptr)) _n_ = (n); \
(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
(unsigned long)_n_, sizeof(*(ptr))); \
})
This does a type check of *ptr to both o and n.
Unfortunately, the code in ring-buffer.c assigns longs to pointers
and pointers to longs and causes a warning on PowerPC:
ring_buffer.c: In function 'rb_head_page_set':
ring_buffer.c:704: warning: initialization makes pointer from integer without a cast
ring_buffer.c:704: warning: initialization makes pointer from integer without a cast
ring_buffer.c: In function 'rb_head_page_replace':
ring_buffer.c:797: warning: initialization makes integer from pointer without a cast
This patch adds the typecasts inside cmpxchg to annotate that a long is
being cast to a pointer and a pointer is being casted to a long and this
removes the PowerPC warnings.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that the pluging tracers use macros to create the structures and
automate the exporting of their formats to the format files, they also
automatically get a filter file.
This patch adds the code to implement the filter logic in the trace
recordings.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The macros in trace_entries.h have made the code in trace_event_types.h
obsolete. The file is no longer used, so this patch removes it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch changes the way the format files in
debugfs/tracing/events/ftrace/*/format
are created. It uses the new trace_entries.h file to automate the
creation of the format files to ensure that they are always in sync
with the actual structures. This is the same methodology used to
create the format files for the TRACE_EVENT macro.
This also updates the filter creation that was built on the creation
of the format files.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some of the internal ftrace structures use structures within. The
output of a field saying it is just a structure is useless for a format
file. A binary reader of the ring buffer needs to know more about
how the fields are broken up.
This patch adds to the ftrace structure macros new fields to
describe the structures inside a structure.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The entries used by ftrace internal code (plugins) currently have their
formats manually exported to userspace. That is, the format files in
debugfs/tracing/events/ftrace/*/format are currently created by hand.
This is a maintenance nightmare, and can easily become out of sync
with what is actually shown.
This patch uses the methodology of the TRACE_EVENT macros to build
the structures so that their formats can be automated and this
will keep the structures in sync with what users can see.
This patch only changes the way the structures are created. Further
patches will build off of this to automate the format files.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the correspoding module is unloaded before ftrace_profile_disable()
is called, event->profile_disable() won't be called, which can
cause oops:
# insmod trace-events-sample.ko
# perf record -f -a -e sample:foo_bar sleep 3 &
# sleep 1
# rmmod trace_events_sample
# insmod trace-events-sample.ko
OOPS!
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A9214E3.2070807@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The state of the function pair tracing_stop()/tracing_start() is
correctly considered when tracer data are updated. However, the global
and externally accessible variable tracing_max_latency is always updated
- even when tracing is stopped.
The update should only occur, if tracing was not stopped.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the nsecs_to_usecs() conversion in probe_wakeup_sched_switch() and
check_critical_timing() was moved to a later stage in order to avoid
unnecessary computing, it was overlooked to remove the original
variables, assignments and comments..
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Convert the writing to 'set_graph_function', 'set_ftrace_filter'
and 'set_ftrace_notrace' to use the generic trace_parser
'trace_get_user' function.
Removed FTRACE_ITER_CONT flag, since it's not needed after this change.
Minor fix in set_graph_function display - g_show function.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1252682969-3366-4-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Convert the parsing of the file 'set_event' to use the generic
trace_praser 'trace_get_user' function.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1252682969-3366-3-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Create a "trace_parser" that can parse the user space input for
separate words.
struct trace_parser is the descriptor.
Generic "trace_get_user" function that can be a helper to read multiple
words passed in by user space.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <1252682969-3366-2-git-send-email-jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Both trace_output.c and trace_function_graph.c do basically the same
thing to handle the printing of the latency-format. This patch moves
the code into one function that both can use.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The userstack trace required the recording of the tgid entry.
Unfortunately, it was added to the generic entry where it wasted
4 bytes of every entry and was only used by one entry.
This patch moves it out of the generic field and moves it into the
only user (userstack_entry).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
While debugging something with the function_graph tracer, I found the
need to see the preempt count of the traces. Unfortunately, since
the function graph tracer has its own output formatting, it does not
honor the latency-format option.
This patch makes the function_graph tracer honor the latency-format
option, but still keeps control of the output. But now we have the
same details that the latency-format supplies.
# tracer: function_graph
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| /
# ||||
# CPU|||| DURATION FUNCTION CALLS
# | |||| | | | | | |
3) d..1 1.333 us | idle_cpu();
3) d.h1 | tick_check_idle() {
3) d.h1 0.550 us | tick_check_oneshot_broadcast();
3) d.h1 | tick_nohz_stop_idle() {
3) d.h1 | ktime_get() {
3) d.h1 | ktime_get_ts() {
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add argument name assignment support and remove "alias" lines from format.
This allows user to assign unique name to each argument. For example,
$ echo p do_sys_open dfd=a0 filename=a1 flags=a2 mode=a3 > kprobe_events
This assigns dfd, filename, flags, and mode to 1st - 4th arguments
respectively. Trace buffer shows those names too.
<...>-1439 [000] 1200885.933147: do_sys_open+0x0/0xdf: dfd=ffffff9c filename=bfa898ac flags=8000 mode=0
This helps users to know what each value means.
Users can filter each events by these names too. Note that you can not
filter by argN anymore.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090910235337.22412.77383.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add *probe_profile_enable/disable to support kprobes raw events
sampling from perf counters, like other ftrace events, when
CONFIG_PROFILE_EVENT=y.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090910235329.22412.94731.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Prohibit user to specify negative offset from symbols.
Since kprobe.offset is unsigned int, the offset must be always positive
value.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <20090910235314.22412.64631.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Conflicts:
kernel/trace/trace_export.c
kernel/trace/trace_kprobe.c
Merge reason: This topic branch lacks an important
build fix in tracing/core:
0dd7b74787:
tracing: Fix double CPP substitution in TRACE_EVENT_FN
that prevents from multiple tracepoint headers inclusion crashes.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Move DEFINE_COMPARISON_PRED() and DEFINE_EQUALITY_PRED()
to kernel/trace/trace_events_filter.c
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AA8579B.4020706@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove unused field @stats from struct tracer.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AA8579B.4020706@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The wakeup tracer, when enabled, has its own function tracer.
It only traces the functions on the CPU where the task it is following
is on. If a task is woken on one CPU but then migrates to another CPU
before it wakes up, the latency tracer will then start tracing functions
on the other CPU.
To find which CPU the task is on, the wakeup function tracer performs
a task_cpu(wakeup_task). But to make sure the task does not disappear
it grabs the wakeup_lock, which is also taken when the task wakes up.
By taking this lock, the function tracer does not need to worry about
the task being freed as it checks its cpu.
Jan Blunck found a problem with this approach on his 32 CPU box. When
a task is being traced by the wakeup tracer, all functions take this
lock. That means that on all 32 CPUs, each function call is taking
this one lock to see if the task is on that CPU. This lock has just
serialized all functions on all 32 CPUs. Needless to say, this caused
major issues on that box. It would even lockup.
This patch changes the wakeup latency to insert a probe on the migrate task
tracepoint. When a task changes its CPU that it will run on, the
probe will take note. Now the wakeup function tracer no longer needs
to take the lock. It only compares the current CPU with a variable that
holds the current CPU the task is on. We don't worry about races since
it is OK to add or miss a function trace.
Reported-by: Jan Blunck <jblunck@suse.de>
Tested-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
rb_buffer_peek() operates with struct ring_buffer_per_cpu *cpu_buffer
only. Thus, instead of passing variables buffer and cpu it is better
to use cpu_buffer directly. This also reduces the risk of races since
cpu_buffer is not calculated twice.
Signed-off-by: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1249045084-3028-1-git-send-email-robert.richter@amd.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The compiler warns us about:
kernel/trace/trace_ksym.c: In function ksym_hbp_handler:
kernel/trace/trace_ksym.c:92: attention : passing argument 1 of trace_buffer_lock_reserve from incompatible pointer type
kernel/trace/trace_ksym.c:106: attention : passing argument 1 of trace_buffer_unlock_commit from incompatible pointer type
Commit "e77405ad" (tracing: pass around ring buffer
instead of tracer) has changed the central tracing
APIs. And this change has updated every callsites of
these APIs except those that aren't in tracing/core,
such as the ksym tracer.
Cc: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
arch/Kconfig
kernel/trace/trace.h
Merge reason: resolve the conflicts, plus adopt to the new
ring-buffer APIs.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since the ability to swap the cpu buffers adds a small overhead to
the recording of a trace, we only want to add it when needed.
Only the irqsoff and preemptoff tracers use this feature, and both are
not recommended for production kernels. This patch disables its use
when neither irqsoff nor preemptoff is configured.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Because the irqsoff tracer can swap an internal CPU buffer, it is possible
that a swap happens between the start of the write and before the committing
bit is set (the committing bit will disable swapping).
This patch adds a check for this and will fail the write if it detects it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The irqsoff tracer will fail to swap the cpu buffer with the max
buffer if it preempts a commit. Instead of ignoring this, this patch
makes the tracer report it if the last max latency failed due to preempting
a current commit.
The output of the latency tracer will look like this:
# tracer: irqsoff
#
# irqsoff latency trace v1.1.5 on 2.6.31-rc5
# --------------------------------------------------------------------
# latency: 112 us, #1/1, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:4)
# -----------------
# | task: -4281 (uid:0 nice:0 policy:0 rt_prio:0)
# -----------------
# => started at: save_args
# => ended at: __do_softirq
#
#
# _------=> CPU#
# / _-----=> irqs-off
# | / _----=> need-resched
# || / _---=> hardirq/softirq
# ||| / _--=> preempt-depth
# |||| /
# ||||| delay
# cmd pid ||||| time | caller
# \ / ||||| \ | /
bash-4281 1d.s6 265us : update_max_tr_single: Failed to swap buffers due to commit in progress
Note the latency time and the functions that disabled the irqs or preemption
will still be listed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds a trace_array_printk to allow a tracer to use the
trace_printk on its own trace array.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latency tracers (irqsoff and wakeup) can swap trace buffers
on the fly. If an event is happening and has reserved data on one of
the buffers, and the latency tracer swaps the global buffer with the
max buffer, the result is that the event may commit the data to the
wrong buffer.
This patch changes the API to the trace recording to be recieve the
buffer that was used to reserve a commit. Then this buffer can be passed
in to the commit.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Reseting the trace buffer without first disabling the buffer and
waiting for any writers to complete, can corrupt the ring buffer.
This patch makes the external version of tracing_reset safe from
corruption by disabling the ring buffer and calling synchronize_sched.
This version can no longer be called from interrupt context. But all those
callers have been removed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the latency tracers reset the ring buffer. Unfortunately
if a commit is in process (due to a trace event), this can corrupt
the ring buffer. When this happens, the ring buffer will detect
the corruption and then permanently disable the ring buffer.
The bug does not crash the system, but it does prevent further tracing
after the bug is hit.
Instead of reseting the trace buffers, the timestamp of the start of
the trace is used instead. The buffers will still contain the previous
data, but the output will not count any data that is before the
timestamp of the trace.
Note, this only affects the static trace output (trace) and not the
runtime trace output (trace_pipe). The runtime trace output does not
make sense for the latency tracers anyway.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The predicates of an event and their filter structure are allocated
when we create an event filter for the first time.
These objects must be created once but each time we come with a new
filter, we overwrite such pre-existing allocation, if any.
Thus, this patch checks if the filter has already been allocated
before going ahead.
Spotted-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <4A9CB1BA.3060402@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The function tracing_reset is deprecated for outside use of trace.c.
The new function to reset the the buffers is tracing_reset_online_cpus.
The reason for this is that resetting the buffers while the event
trace points are active can corrupt the buffers, because they may
be writing at the time of reset. The tracing_reset_online_cpus disables
writes and waits for current writers to finish.
This patch replaces all users of tracing_reset except for the latency
tracers. Those changes require more work and will be removed in the
following patches.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Resetting the ring buffers while traces are happening can corrupt
the ring buffer and disable it (no kernel crash to worry about).
The safest thing to do is disable the ring buffers, call synchronize_sched()
to wait for all current writers to finish and then reset the buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When reading the tracer from the trace file, updating the max latency
may corrupt the output. This patch disables the tracing of the max
latency while reading the trace file.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
During development of the tracer, we would copy information from
the live tracer to the max tracer with one memcpy. Since then we
added a generic ring buffer and we handle the copies differently now.
Unfortunately, we never copied the critical section information, and
we lost the output:
# => started at: kmem_cache_alloc
# => ended at: kmem_cache_alloc
This patch adds back the critical start and end copying as well as
removes the unused "trace_idx" and "overrun" fields of the
trace_array_cpu structure.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the way RB_WARN_ON works, is to disable either the current
CPU buffer or all CPU buffers, depending on whether a ring_buffer or
ring_buffer_per_cpu struct was passed into the macro.
Most users of the RB_WARN_ON pass in the CPU buffer, so only the one
CPU buffer gets disabled but the rest are still active. This may
confuse users even though a warning is sent to the console.
This patch changes the macro to disable the entire buffer even if
the CPU buffer is passed in.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latency tracers report the number of items in the trace buffer.
This uses the ring buffer data to calculate this. Because discarded
events are also counted, the numbers do not match the number of items
that are printed. The ring buffer also adds a "padding" item to the
end of each buffer page which also gets counted as a discarded item.
This patch decrements the counter to the page entries on a discard.
This allows us to ignore discarded entries while reading the buffer.
Decrementing the counter is still safe since it can only happen while
the committing flag is still set.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function ring_buffer_event_discard can be used on any item in the
ring buffer, even after the item was committed. This function provides
no safety nets and is very race prone.
An item may be safely removed from the ring buffer before it is committed
with the ring_buffer_discard_commit.
Since there are currently no users of this function, and because this
function is racey and error prone, this patch removes it altogether.
Note, removing this function also allows the counters to ignore
all discarded events (patches will follow).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the ring buffer uses an iterator (static read mode, not on the
fly reading), when it crosses a page boundery, it will skip the first
entry on the next page. The reason is that the last entry of a page
is usually padding if the page is not full. The padding will not be
returned to the user.
The problem arises on ring_buffer_read because it also increments the
iterator. Because both the read and peek use the same rb_iter_peek,
the rb_iter_peak will return the padding but also increment to the next
item. This is because the ring_buffer_peek will not incerment it
itself.
The ring_buffer_read will increment it again and then call rb_iter_peek
again to get the next item. But that will be the second item, not the
first one on the page.
The reason this never showed up before, is because the ftrace utility
always calls ring_buffer_peek first and only uses ring_buffer_read
to increment to the next item. The ring_buffer_peek will always keep
the pointer to a valid item and not padding. This just hid the bug.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The loops in the ring buffer that use cpu_relax are not dependent on
other CPUs. They simply came across some padding in the ring buffer and
are skipping over them. It is a normal loop and does not require a
cpu_relax.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If a commit is taking place on a CPU ring buffer, do not allow it to
be swapped. Return -EBUSY when this is detected instead.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The callers of reset must ensure that no commit can be taking place
at the time of the reset. If it does then we may corrupt the ring buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
init_preds() allocates about 5392 bytes of memory (on x86_32) for
a TRACE_EVENT. With my config, at system boot total memory occupied
is:
5392 * (642 + 15) == 3459KB
642 == cat available_events | wc -l
15 == number of dirs in events/ftrace
That's quite a lot, so we'd better defer memory allocation util
it's needed, that's when filter is used.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <4A9B8EA5.6020700@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The tracing_max_latency file should only be present when one of the
latency tracers ({preempt|irqs}off, wakeup*) are enabled.
This patch also removes tracing_thresh when latency tracers are not
enabled, as well as compiles out code that is only used for latency
tracers.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The context switch tracer was made before tracepoints were mature, and
the original version used markers. This is no longer true and this
patch removes the select.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cleaup uneeded casts from void * to char * in syscalls tracing file.
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Restore the const qualifier in field's name and type parameters of
trace_define_field that was lost while solving a conflict.
Fields names and types are defined as builtin constant strings in
static TRACE_EVENTs. But kprobes allocates these dynamically.
That said, we still want to always pass these strings as const char *
in trace_define_fields() to avoid any further accidental writes on
the pointed strings.
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Change trace_arg_string() and parse_trace_arg() to probe_arg_string()
and parse_probe_arg(), since those are kprobe-tracer local functions.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090821194351.12478.15247.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add profiling interfaces for each kprobes event. This interface provides
how many times each probe hit or missed.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203541.31965.8452.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Assign new event ids for each kprobes event. This doesn't clear
ring_buffer when unregistering each kprobe event. Thus, if you mind
'Unknown event' messages, clear the buffer manually after changing
kprobe events.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203534.31965.49105.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Generate names for each kprobe event based on the probe point.
(SYMBOL+offs or MEMADDR).
Also remove generic k*probe event types because there is no user
of those types.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203526.31965.56672.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Support up to 128 arguments to fetch for each kprobes event.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203518.31965.96979.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add kprobes-based event tracer on ftrace.
This tracer is similar to the events tracer which is based on Tracepoint
infrastructure. Instead of Tracepoint, this tracer is based on kprobes
(kprobe and kretprobe). It probes anywhere where kprobes can probe(this
means, all functions body except for __kprobes functions).
Similar to the events tracer, this tracer doesn't need to be activated
via current_tracer, instead of that, just set probe points via
/sys/kernel/debug/tracing/kprobe_events. And you can set filters on each
probe events via /sys/kernel/debug/tracing/events/kprobes/<EVENT>/filter.
This tracer supports following probe arguments for each probe.
%REG : Fetch register REG
sN : Fetch Nth entry of stack (N >= 0)
sa : Fetch stack address.
@ADDR : Fetch memory at ADDR (ADDR should be in kernel)
@SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)
aN : Fetch function argument. (N >= 0)
rv : Fetch return value.
ra : Fetch return address.
+|-offs(FETCHARG) : fetch memory at FETCHARG +|- offs address.
See Documentation/trace/kprobetrace.txt in the next patch for details.
Changes from v13:
- Support 'sa' for stack address.
- Use call->data instead of container_of() macro.
[fweisbec@gmail.com: Fixed conflict against latest tracing/core]
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203510.31965.29123.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Use TRACE_FIELD_ZERO(type, item) instead of TRACE_FIELD_ZERO_CHAR(item).
This also includes a typo fix of TRACE_ZERO_CHAR() macro.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203501.31965.30172.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add dynamic ftrace_event_call support to ftrace. Trace engines can add
new ftrace_event_call to ftrace on the fly. Each operator function of
the call takes an ftrace_event_call data structure as an argument,
because these functions may be shared among several ftrace_event_calls.
Changes from v13:
- Define remove_subsystem_dir() always (revirt a2ca5e03), because
trace_remove_event_call() uses it.
- Modify syscall tracer because of ftrace_event_call change.
[fweisbec@gmail.com: Fixed conflict against latest tracing/core]
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203453.31965.71901.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Convert the syscalls event tracing code to use NR_syscalls, instead of
FTRACE_SYSCALL_MAX. NR_syscalls is standard accross most arches, and
reduces code confusion/complexity.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Josh Stone <jistone@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anwin <hpa@zytor.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <9b4f1a84ecae57cc6599412772efa36f0d2b815b.1251146513.git.jbaron@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Most arch syscall_get_nr() implementations returns -1 if the syscall
number is not valid. Accessing the bit field without a check might
result in a kernel oops (at least I saw it on s390 for ftrace selftest).
Before this change, this problem did not occur, because the invalid
syscall number (-1) caused syscall_nr_to_meta() to return NULL.
There are at least two scenarios where syscall_get_nr() can return -1:
1. For example, ptrace stores an invalid syscall number, and thus,
tracing code resets it.
(see do_syscall_trace_enter in arch/s390/kernel/ptrace.c)
2. The syscall_regfunc() (kernel/tracepoint.c) sets the
TIF_SYSCALL_FTRACE (now: TIF_SYSCALL_TRACEPOINT) flag for all threads
which include kernel threads.
However, the ftrace selftest triggers a kernel oops when testing
syscall trace points:
- The kernel thread is started as ususal (do_fork()),
- tracing code sets TIF_SYSCALL_FTRACE,
- the ret_from_fork() function is triggered and starts
ftrace_syscall_exit() with an invalid syscall number.
To avoid these scenarios, I suggest to check the syscall_nr.
For instance, the ftrace selftest fails for s390 (with config option
CONFIG_FTRACE_SYSCALLS set) and produces the following kernel oops.
Unable to handle kernel pointer dereference at virtual kernel address 2000000000
Oops: 0038 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 Not tainted 2.6.31-rc6-next-20090819-dirty #18
Process kthreadd (pid: 818, task: 000000003ea207e8, ksp: 000000003e813eb8)
Krnl PSW : 0704100180000000 00000000000ea54c (ftrace_syscall_exit+0x58/0xdc)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0 EA:3
Krnl GPRS: 0000000000000000 00000000000e0000 ffffffffffffffff 20000000008c2650
0000000000000007 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000 ffffffffffffffff 000000003e813d78
000000003e813f58 0000000000505ba8 000000003e813e18 000000003e813d78
Krnl Code: 00000000000ea540: e330d0000008 ag %r3,0(%r13)
00000000000ea546: a7480007 lhi %r4,7
00000000000ea54a: 1442 nr %r4,%r2
>00000000000ea54c: e31030000090 llgc %r1,0(%r3)
00000000000ea552: 5410d008 n %r1,8(%r13)
00000000000ea556: 8a104000 sra %r1,0(%r4)
00000000000ea55a: 5410d00c n %r1,12(%r13)
00000000000ea55e: 1211 ltr %r1,%r1
Call Trace:
([<0000000000000000>] 0x0)
[<000000000001fa22>] do_syscall_trace_exit+0x132/0x18c
[<000000000002d0c4>] sysc_return+0x0/0x8
[<000000000001c738>] kernel_thread_starter+0x0/0xc
Last Breaking-Event-Address:
[<00000000000ea51e>] ftrace_syscall_exit+0x2a/0xdc
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
LKML-Reference: <20090825125027.GE4639@cetus.boeblingen.de.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
There are many clock sources for the tracing system but we can only
enable/disable one at a time with the trace/options file.
We can move the setting of clock-source out of options and add a separate
file for it:
# cat trace_clock
[local] global
# echo global > trace_clock
# cat trace_clock
local [global]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
LKML-Reference: <4A939D08.6050604@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Usually, char * entries are dangerous in traces because the string
can be released whereas a pointer to it can still wait to be read from
the ring buffer.
But sometimes we can assume it's safe, like in case of RO data
(eg: __file__ or __line__, used in bkl trace event). If these RO data
are in a module and so is the call to the trace event, then it's safe,
because the ring buffer will be flushed once this module get unloaded.
To allow char * to be treated as a string:
TRACE_EVENT(...,
TP_STRUCT__entry(
__field_ext(const char *, name, FILTER_PTR_STRING)
...
)
...
);
The filtering will not dereference "char *" unless the developer
explicitly sets FILTER_PTR_STR in __field_ext.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A7B9287.90205@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add __field_ext(), so a field can be assigned to a specific
filter_type, which matches a corresponding filter function.
For example, a later patch will allow this:
__field_ext(const char *, str, FILTER_PTR_STR);
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A7B9272.6050709@cn.fujitsu.com>
[
Fixed a -1 to FILTER_OTHER
Forward ported to latest kernel.
]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The type of a field is stored as a string in @type, and here
we add @filter_type which is an enum value.
This prepares for later patches, so we can specifically assign
different @filter_type for the same @type.
For example normally a "char *" field is treated as a ptr,
but we may want it to be treated as a string when doing filting.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A7B925E.9030605@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This converts the syscall_enter/exit tracepoints into TRACE_EVENTs, so
you can have generic ftrace events that capture all system calls with
arguments and return values. These generic events are also renamed to
sys_enter/exit, so they're more closely aligned to the specific
sys_enter_foo events.
Signed-off-by: Josh Stone <jistone@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <1251150194-1713-5-git-send-email-jistone@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
s/HAVE_FTRACE_SYSCALLS/HAVE_SYSCALL_TRACEPOINTS/g
s/TIF_SYSCALL_FTRACE/TIF_SYSCALL_TRACEPOINT/g
The syscall enter/exit tracing is no longer specific to just ftrace, so
they now have names that reflect their tie to tracepoints instead.
Signed-off-by: Josh Stone <jistone@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
LKML-Reference: <1251150194-1713-2-git-send-email-jistone@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Extract duplicate code. Also prepare for the later patch.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A8BAFB8.1010304@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This parameter is needed by syscall events to add define_fields()
handler.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A8BAF90.6060801@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The "format" file of a trace event is originally for parsers to
parse ftrace binary output.
But the "format" file of a syscall event can only be used by
perfcounter, because it describes the format of struct
syscall_enter_record not struct syscall_trace_enter.
To fix this, we remove struct syscall_enter_record, and then
struct syscall_trace_enter will be used by both perf profile
and ftrace.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A8BAF39.1030404@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
"echo noglobal-clock > trace_options" can be used to change trace
clock but "echo 0 > options/global-clock" can't. The flag toggling
will be silently accepted without actually changing the clock callback.
We can fix it by using set_tracer_flags() in
trace_options_core_write().
Changelog:
v1->v2: Simplified switch() after Li Zefan <lizf@cn.fujitsu.com>'s
suggestion
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
One entry is missing in the output of a stat file.
The cause is, when stat_seq_start() is called the 2nd time, we
should start from the (pos-1)th elem in the rbtree but not pos,
because pos == 0 is the header.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A891A65.70009@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When syscall tracing was implemented as a tracer,
"syscall_arg_type" trace option could be set to enable the
display of syscall parameter types.
Now this option is gone since it's no longer a tracer, but the
code is still there but dead.
So we remove dead code and re-enable the printing of paramete
types via the verbose option:
# echo verbose > trace_options
# echo syscalls > set_event
# cat trace
...
bash-3331 [000] 95.348937: sys_fcntl64 -> 0x1
bash-3331 [000] 95.348942: sys_close(unsigned int fd: a)
...
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
LKML-Reference: <4A891AF6.5050102@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
arch/sparc/kernel/smp_64.c
arch/x86/kernel/cpu/perf_counter.c
arch/x86/kernel/setup_percpu.c
drivers/cpufreq/cpufreq_ondemand.c
mm/percpu.c
Conflicts in core and arch percpu codes are mostly from commit
ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many
num_possible_cpus() with nr_cpu_ids. As for-next branch has moved all
the first chunk allocators into mm/percpu.c, the changes are moved
from arch code to mm/percpu.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
commit fd51d251e4
Author: Stefan Raspl <raspl@linux.vnet.ibm.com>
Date: Tue May 19 09:59:08 2009 +0200
blktrace: remove debugfs entries on bad path
added in an explicit invocation of debugfs_remove for bt->dir, in
blk_remove_buf_file_callback we are also getting the directory removed. On
occasion I am seeing memory corruption that I have bisected down to
this commit. [The testing involves a (long) series of I/O benchmarks
with blktrace invoked around the actual runs.] I believe that this
committed patch is correct, but the problem actually lies in the code
in blk_remove_buf_file_callback.
With this patch I am able to consistently get complete runs whereas
previously I could not get a single run to complete.
The first part of the patch simply moves the debugfs_remove below the
relay_close: the relay_close call will remove files under bt->dir, and
so we should not remove the directory until all the files we created
have been removed. (Note: This is not sufficient to fix the problem -
the file system code has ref counts on the directoy, so our invocation
does not cause the directory to actually be removed. Nonetheless, we
should not rely upon that feature.)
Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Define the format of the syscall trace fields to parse the binary
values from a raw trace using the syscall events "format" file.
This is defined dynamically using the syscalls metadata.
It prepares the export of syscall event raw records to perf
counters.
Example:
$ cat /debug/tracing/events/syscalls/sys_enter_sched_getparam/format
name: sys_enter_sched_getparam
ID: 39
format:
field:unsigned short common_type; offset:0; size:2;
field:unsigned char common_flags; offset:2; size:1;
field:unsigned char common_preempt_count; offset:3; size:1;
field:int common_pid; offset:4; size:4;
field:int common_tgid; offset:8; size:4;
field:pid_t pid; offset:12; size:8;
field:struct sched_param * param; offset:20; size:8;
print fmt: "pid: 0x%08lx, param: 0x%08lx", ((unsigned long)(REC->pid)), ((unsigned long)(REC->param))
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Add the struct ftrace_event_call as a parameter of its show_format()
callback. This way we can use it from the syscall trace events to
retrieve the syscall name from the ftrace event call parameter and
describe its fields using the syscalls metadata.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
The perf counter support is automated for usual trace events. But we
have to define specific callbacks for this to handle syscalls trace
events
Make 'perf stat -e syscalls:sys_enter_blah' work with syscall style
tracepoints.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The current state of syscalls tracepoints generates only one event id
for every syscall events.
This patch associates an id with each syscall trace event, so that we
can identify each syscall trace event using the 'perf' tool.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Layer Frederic's syscall tracer on tracepoints. We create trace events
via hooking into the SYSCALL_DEFINE macros. This allows us to
individually toggle syscall entry and exit points on/off.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
add an optional void * pointer to 'ftrace_event_call' that is
passed in for regfunc and unregfunc.
This prepares for syscall tracepoints creation by passing the name of
the syscall we want to trace and then retrieve its number through our
arch syscall table.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Allow the return value of raw_init() trace event callback to bail us out
of creating a trace event file, in case we fail to register our
event.
Also, we plan to return -ENOSYS for syscall events that don't match any
syscalls listed in our arch tracing syscall table, we don't want to warn
in that case, we just want this event to be invisible in debugfs and
ignored.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Call arch_init_ftrace_syscalls at boot, so we can determine early the
set of syscalls for the syscall trace events.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Jiaying Zhang <jiayingz@google.com>
Cc: Martin Bligh <mbligh@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
set_tracer_flags() have a local variable named trace_flags which has
the same name than a global one in the same scope.
This leads to confusion, using tracer_flags should be better by its
meaning.
Changelog:
v1->v2: Simplified another patch in this patchset, no change in this
patch.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
This patch implements the kernel side support for ftrace event
record sampling.
A new counter sampling attribute is added:
PERF_SAMPLE_TP_RECORD
which requests ftrace events record sampling. In this case
if a PERF_TYPE_TRACEPOINT counter is active and a tracepoint
fires, we emit the tracepoint binary record to the
perfcounter event buffer, as a sample.
Result, after setting PERF_SAMPLE_TP_RECORD attribute from perf
record:
perf record -f -F 1 -a -e workqueue:workqueue_execution
perf report -D
0x21e18 [0x48]: event: 9
.
. ... raw event: size 72 bytes
. 0000: 09 00 00 00 01 00 48 00 d0 c7 00 81 ff ff ff ff ......H........
. 0010: 0a 00 00 00 0a 00 00 00 21 00 00 00 00 00 00 00 ........!......
. 0020: 2b 00 01 02 0a 00 00 00 0a 00 00 00 65 76 65 6e +...........eve
. 0030: 74 73 2f 31 00 00 00 00 00 00 00 00 0a 00 00 00 ts/1...........
. 0040: e0 b1 31 81 ff ff ff ff .......
.
0x21e18 [0x48]: PERF_EVENT_SAMPLE (IP, 1): 10: 0xffffffff8100c7d0 period: 33
The raw ftrace binary record starts at offset 0020.
Translation:
struct trace_entry {
type = 0x2b = 43;
flags = 1;
preempt_count = 2;
pid = 0xa = 10;
tgid = 0xa = 10;
}
thread_comm = "events/1"
thread_pid = 0xa = 10;
func = 0xffffffff8131b1e0 = flush_to_ldisc()
What will come next?
- Userspace support ('perf trace'), 'flight data recorder' mode
for perf trace, etc.
- The unconditional copy from the profiling callback brings
some costs however if someone wants no such sampling to
occur, and needs to be fixed in the future. For that we need
to have an instant access to the perf counter attribute.
This is a matter of a flag to add in the struct ftrace_event.
- Take care of the events recursivity! Don't ever try to record
a lock event for example, it seems some locking is used in
the profiling fast path and lead to a tracing recursivity.
That will be fixed using raw spinlock or recursivity
protection.
- [...]
- Profit! :-)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge reason: Merge up to almost-rc6 to pick up latest perfcounters
(on which we'll queue up a dependent fix)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Dan Carpenter sent me a fix to prevent pred from being used if
it couldn't be allocated. This updates his patch for the same
problem in the tracing tree (which has changed this code quite
substantially).
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1249746576.6453.30.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The original report:
create_logical_pred() could sometimes return NULL.
It's a static checker complaining rather than problems at runtime...
If filter_add_subsystem_pred() fails due to ENOSPC or ENOMEM,
the pred doesn't get freed, while as a side effect it does for
other errors. Make it so the caller always frees the pred for
any error.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1249746593.6453.32.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Dan Carpenter sent me a fix to prevent pred from being used if
it couldn't be allocated. I noticed the same problem also
existed for the create_pred() case and added a fix for that.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1249746549.6453.29.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I noticed oprofile memleaked in linux-2.6 current tree,
and tracked this ring-buffer leak.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
LKML-Reference: <4A7C06B9.2090302@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When calling rb_buffer_peek() from ring_buffer_consume() and a
padding event is returned, the function rb_advance_reader() is
called twice. This may lead to missing samples or under high
workloads to the warning below. This patch fixes this. If a padding
event is returned by rb_buffer_peek() it will be consumed by the
calling function now.
Also, I simplified some code in ring_buffer_consume().
------------[ cut here ]------------
WARNING: at /dev/shm/.source/linux/kernel/trace/ring_buffer.c:2289 rb_advance_reader+0x2e/0xc5()
Hardware name: Anaheim
Modules linked in:
Pid: 29, comm: events/2 Tainted: G W 2.6.31-rc3-oprofile-x86_64-standard-00059-g5050dc2 #1
Call Trace:
[<ffffffff8106776f>] ? rb_advance_reader+0x2e/0xc5
[<ffffffff81039ffe>] warn_slowpath_common+0x77/0x8f
[<ffffffff8103a025>] warn_slowpath_null+0xf/0x11
[<ffffffff8106776f>] rb_advance_reader+0x2e/0xc5
[<ffffffff81068bda>] ring_buffer_consume+0xa0/0xd2
[<ffffffff81326933>] op_cpu_buffer_read_entry+0x21/0x9e
[<ffffffff810be3af>] ? __find_get_block+0x4b/0x165
[<ffffffff8132749b>] sync_buffer+0xa5/0x401
[<ffffffff810be3af>] ? __find_get_block+0x4b/0x165
[<ffffffff81326c1b>] ? wq_sync_buffer+0x0/0x78
[<ffffffff81326c76>] wq_sync_buffer+0x5b/0x78
[<ffffffff8104aa30>] worker_thread+0x113/0x1ac
[<ffffffff8104dd95>] ? autoremove_wake_function+0x0/0x38
[<ffffffff8104a91d>] ? worker_thread+0x0/0x1ac
[<ffffffff8104dc9a>] kthread+0x88/0x92
[<ffffffff8100bdba>] child_rip+0xa/0x20
[<ffffffff8104dc12>] ? kthread+0x0/0x92
[<ffffffff8100bdb0>] ? child_rip+0x0/0x20
---[ end trace f561c0a58fcc89bd ]---
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@kernel.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If we disable modules, we get the following warning in ftrace events
file:
kernel/trace/trace_events.c:912: attention : ‘remove_subsystem_dir’ defined but not used
remove_subystem_dir() is useless if !CONFIG_MODULES, then move it to
the appropriate #ifdef section of trace_events.c
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
The function graph events helpers which insert the function entry and
return events into the ring buffer currently reside in trace.c
But this file is quite overloaded and the right place for these helpers
is in the function graph tracer file.
Then move them to trace_functions_graph.c
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
The sched events helpers which insert the sched switch and wakeup
events into the ring buffer currently reside in trace.c
But this file is quite overloaded and the right place for these helpers
is in the sched switch tracer file.
Then move them to trace_functions.c
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Make the stacktrace event insertion helpers globals.
This has two effects:
- Prepare for moving the sched events insertion helpers to
the sched switch tracer file.
- Move some ifdef outside function definitions
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
In order to prepare the moving of the function graph tracer insertion
helpers from trace.c to trace_functions_graph.c, we need to export the
ftrace_cpu_disabled variable.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
print_graph_cpu() is little over-designed.
And "log10_all" may be wrong when there are holes in cpu_online_mask:
the max online cpu id > cpumask_weight(cpu_online_mask)
So change it by using a static column length for the cpu matching
nr_cpu_ids number of decimal characters.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A6EEE5E.2000001@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Not all tracepoints are created equal, in specific the ftrace
tracepoints are created with TRACE_EVENT_FORMAT() which does
not generate the needed bits to tie them into perf counters.
For those events, don't create the 'id' file and fail
->profile_enable when their ID is specified through other
means.
Reported-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1249497664.5890.4.camel@laptop>
[ v2: fix build error in the !CONFIG_EVENT_PROFILE case ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The commit:
commit e0fdace10e
Author: David Miller <davem@davemloft.net>
Date: Fri Aug 1 01:11:22 2008 -0700
debug_locks: set oops_in_progress if we will log messages.
Otherwise lock debugging messages on runqueue locks can deadlock the
system due to the wakeups performed by printk().
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Will permanently set oops_in_progress on any lockdep failure.
When this triggers it will cause any read from the ring buffer to
permanently disable the ring buffer (not to mention no locking of
printk).
This patch removes the check. It keeps the print in NMI which makes
sense. This is probably OK, since the ring buffer should not cause
something to set oops_in_progress anyway.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function ring_buffer_discard_commit inversed the code path
of the result of try_to_discard. It should skip incrementing the
entry counter if try_to_discard succeeded. But instead, it increments
the entry conder if it succeeded to discard, and does not increment
it if it fails.
The result of this bug is that filtering will make the stat counters
incorrect.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
About a half events are missing when we splice_read
from trace_pipe. They are unexpectedly consumed because we ignore
the TRACE_TYPE_NO_CONSUME return value used by the function graph
tracer when it needs to consume the events by itself to walk on
the ring buffer.
The same problem appears with ftrace_dump()
Example of an output before this patch:
1) | ktime_get_real() {
1) 2.846 us | read_hpet();
1) 4.558 us | }
1) 6.195 us | }
After this patch:
0) | ktime_get_real() {
0) | getnstimeofday() {
0) 1.960 us | read_hpet();
0) 3.597 us | }
0) 5.196 us | }
The fix also applies on 2.6.30
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@kernel.org
LKML-Reference: <4A6EEC52.90704@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
When print_graph_entry() computes a function call entry event, it needs
to also check the next entry to guess if it matches the return event of
the current function entry.
In order to look at this next event, it needs to consume the current
entry before going ahead in the ring buffer.
However, if the current event that gets consumed is the last one in the
ring buffer head page, the ring_buffer may reuse the page for writers.
The consumed entry will then become invalid because of possible
racy overwriting.
Me must then handle this entry by making a copy of it.
The fix also applies on 2.6.30
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@kernel.org
LKML-Reference: <4A6EEAEC.3050508@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
It's rather boring to clear symbol one by one in ksym_trace_filter
file, so, this patch will let ksym_trace_filter file support quickly
clear all break points. We can write "0" to this file and it will clear
all symbols
for example:
# cat ksym_trace_filter
ksym_filter_head:rw-
global_trace:rw-
# echo 0 > ksym_trace_filter
# cat ksym_trace_filter
#
Changelog v1->v2:
Add other ways to clear all breakpoints by writing NULL or "*:---"
to ksym_trace_filter file base on K.Prasad's suggestion
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
LKML-Reference: <4A67E092.3080202@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch fix 2 bugs:
- fix the return value of ksym_trace_filter_write() when we want to
clear symbol in ksym_trace_filter file
for example:
# echo global_trace:rw- > /debug/tracing/ksym_trace_filter
# echo global_trace:--- > /debug/tracing/ksym_trace_filter
-bash: echo: write error: Invalid argument
# cat /debug/tracing/ksym_trace_filter
#
We want to clear 'global_trace' in ksym_trace_filter, it complain
with "Invalid argument", but the operation is successful
- the "r--" access types is not allowed, but ksym_trace_filter file think
it OK
for example:
# echo ksym_tracer_mutex:r-- > ksym_trace_filter
-bash: echo: write error: Resource temporarily unavailable
# dmesg
ksym_tracer request failed. Try again later!!
The error occur at register_kernel_hw_breakpoint(), but It's should
at access types parser
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
LKML-Reference: <4A66863D.5090802@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The current code will truncate the ftrace files contents if O_APPEND
is not set and the file is opened in write mode. This is incorrect.
It should only truncate the file if O_TRUNC is set. Otherwise
if one of these files is opened by a C program with fopen "r+",
it will incorrectly truncate the file.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since the trace_printk may use pointers to the format fields
in the buffer, they are exported via debugfs/tracing/printk_formats.
This is used by utilities that read the ring buffer in binary format.
It helps the utilities map the address of the format in the binary
buffer to what the printf format looks like.
Unfortunately, the way the output code works, it exports the address
of the pointer to the format address, and not the format address
itself. This makes the file totally useless in trying to figure
out what format string a binary address belongs to.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every time we cat a trace_stat file, we leak memory allocated by
seq_open().
Also fix memory leak in a failure path in tracing_stat_open().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A67D92B.4060704@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every time we cat set_graph_function, we leak memory allocated
by seq_open().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A67D907.2010500@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every time we cat stack_trace, we leak memory allocated by seq_open().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A67D8E8.3020500@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently a subsystem filter should be applicable to all events
under the subsystem, and if it failed, all the event filters
will be cleared. Those behaviors make subsys filter much less
useful:
# echo 'vec == 1' > irq/softirq_entry/filter
# echo 'irq == 5' > irq/filter
bash: echo: write error: Invalid argument
# cat irq/softirq_entry/filter
none
I'd expect it set the filter for irq_handler_entry/exit, and
not touch softirq_entry/exit.
The basic idea is, try to see if the filter can be applied
to which events, and then just apply to the those events:
# echo 'vec == 1' > softirq_entry/filter
# echo 'irq == 5' > filter
# cat irq_handler_entry/filter
irq == 5
# cat softirq_entry/filter
vec == 1
Changelog for v2:
- do some cleanups to address Frederic's comments.
Inspired-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A63D485.7030703@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
'\n' is already appended, and what we need is just an extra
space for the '\0'.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
LKML-Reference: <4A3EED63.3090908@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a dynamic array is defined, we add __data_loc_foo in
trace_entry to record the offset of the array, but the
size of the array is not recorded, which causes 2 problems:
- the event filter just compares the first 2 chars of the strings.
- parsers can't parse dynamic arrays.
So we encode the size of each dynamic array in the higher 16 bits
of __data_loc_foo, while the offset is in lower 16 bits.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A5E964A.9000403@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We can directly use %pf input format instead of kallsyms_lookup()
and %s input format
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
We can directly use %pF input format instead of sprint_symbol()
and %s input format.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Rewrite the __ftrace_replace_code() function, simplify it, but don't
change the code's logic.
First, we get the state we want to set, if the record has the same
state, then do nothing, otherwise enable/disable it.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
ftrace_trace_onoff_callback() will return an error even if we do the
right operation, for example:
# echo _spin_*:traceon:10 > set_ftrace_filter
-bash: echo: write error: Invalid argument
# cat set_ftrace_filter
#### all functions enabled ####
_spin_trylock_bh:traceon:count=10
_spin_unlock_irq:traceon:count=10
_spin_unlock_bh:traceon:count=10
_spin_lock_irq:traceon:count=10
_spin_unlock:traceon:count=10
_spin_trylock:traceon:count=10
_spin_unlock_irqrestore:traceon:count=10
_spin_lock_irqsave:traceon:count=10
_spin_lock_bh:traceon:count=10
_spin_lock:traceon:count=10
We want to set _spin_*:traceon:10 to set_ftrace_filter, it complains
with "Invalid argument", but the operation is successful.
This is because ftrace_process_regex() returns the number of functions that
matched the pattern. If the number is not 0, this value is returned
by ftrace_regex_write() whereas we want to return the number of bytes
virtually written.
Also the file offset pointer is not updated in this case.
If the number of matched functions is lower than the number of bytes written
by the user, this results to a reprocessing of the string given by the user with
a lower size, leading to a malformed ftrace regex and then a -EINVAL returned.
So, this patch fixes it by returning 0 if no error occured.
The fix also applies on 2.6.30
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
kernel/trace/ring_buffer.c: In function 'rb_tail_page_update':
kernel/trace/ring_buffer.c:849: warning: value computed is not used
kernel/trace/ring_buffer.c:850: warning: value computed is not used
Add "(void)"s to fix this warning, because we don't need here to handle
the fail case of cmpxchg, it's fine if an interrupt already did the
job.
Changed from V1:
Add a comment(which is written by Steven) for it.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The per cpu variable stat is freeded if we fail to allocate a name
on start up. This was due to stat at first being allocated in the
initial design. But since then, it has become a static per cpu variable
but the free on error was not removed.
Also added __init annotation to the function that this is in.
[ Impact: prevent possible memory corruption on low mem at boot up ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT
This will make hardirq.h inclusion cheaper for every PREEMPT=n config
(which includes allmodconfig/allyesconfig, BTW)
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The stat entries can be freed when the stat file is being read.
The worse is, the ptr can be freed immediately after it's returned
from workqueue_stat_start/next().
Add a refcnt to struct cpu_workqueue_stats to avoid use-after-free.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A51B16F.6010608@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add stat_release() callback to struct tracer_stat, so a stat tracer
can release it's entries after the stat file has been read out.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A51B16A.6020708@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So we have:
- kmemtrace_print_alloc/free() for kmemtrace default output
- kmemtrace_print_alloc/free_user() for binary output used
by kmemtrace-user.
Suggested-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A51B288.70505@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the obsolete seq_print_ip_sym() usage and replace it
by the %pf format in order to print function symbols.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
LKML-Reference: <1247107590-6428-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the obsolete seq_print_ip_sym() usage and replace it
by the %pf format in order to print function symbols.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <1247107590-6428-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When access type is changed, the hw break point will be
unregistered and then be registered again with new access
type. But the registration may fail, in this case, -errno
should be returned.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "K.Prasad" <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A52E314.7070004@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make sure the user input string is NULL-terminated.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "K.Prasad" <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A52E300.7020601@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reading ksym_trace_filter gave me some arbitrary characters,
when it should show nothing. It's because buf is not initialized
when there's no filter.
Also reduce stack usage by about 512 bytes.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "K.Prasad" <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A52E2B4.6030706@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
struct trace_ksym is used as an entry in hbp list, and is also
used as trace_entry stored in ring buffer.
This is not necessary and is a waste of memory in ring buffer.
There is also a bug that dereferencing field->ksym_hbp in
ksym_trace_output() can be invalid.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "K.Prasad" <prasad@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A52E2A4.4050007@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove empty subsystem and its directory when module unload.
Before patch:
# rmmod trace-events-sample.ko
# ls sample
enable filter
After patch:
# rmmod trace-events-sample.ko
# ls sample
ls: cannot access sample: No such file or directory
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Tom Zanussi <tzanussi@gmail.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A55A8BE.9010707@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
No need to save preds to event_subsystem, because it's not used.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Tom Zanussi <tzanussi@gmail.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A55A83C.1030005@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch converts the ring buffers into a completely lockless
buffer recording system. The read side still takes locks since
we still serialize readers. But the writers are the ones that
must be lockless (those can happen in NMIs).
The main change is to the "head_page" pointer. We write to the
tail, and read from the head. The "head_page" pointer in the cpu
buffer is now just a reference to where to look. The real head
page is now kept in the head_page->list->prev->next pointer.
That is, in the list head of the previous page we set flags.
The list pages are allocated to be aligned such that the lowest
significant bits are always zero pointing to the list. This gives
us play to put in flags to their pointers.
bit 0: set when the page is a head page
bit 1: set when the writer is moving the page (for overwrite mode)
cmpxchg is used to update the pointer.
When the writer wraps the buffer and the tail meets the head,
in overwrite mode, the writer must move the head page forward.
It first uses cmpxchg to change the pointer flag from 1 to 2.
Once this is done, the reader on another CPU will not take the
page from the buffer.
The writers need to protect against interrupts (we don't bother with
disabling interrupts because NMIs are allowed to write too).
After the writer sets the pointer flag to 2, it takes care to
manage interrupts coming in. This is discribed in detail within the
comments of the code.
Changes in version 2:
- Let reader reset entries value of header page.
- Fix tail page passing commit page on reader page test.
- Always increment entries and write counter in rb_tail_page_update
- Add safety check in rb_set_commit_to_write to break out of infinite loop
- add mask in rb_is_reader_page
[ Impact: lock free writing to the ring buffer ]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch changes the ring buffer data pages from using a link list
head pointer, to making each buffer page point to another buffer page
and never back to a "head".
This makes the handling of the ring buffer less complex, since the
traversing of the ring buffer pages no longer needs to account for the
head pointer.
This change also is needed to make the ring buffer lockless.
[
Changes in version 2:
- Added change that Lai Jiangshan mentioned.
From: Lai Jiangshan <laijs@cn.fujitsu.com>
Date: Thu, 11 Jun 2009 11:25:48 +0800
LKML-Reference: <4A30793C.6090208@cn.fujitsu.com>
I'm not sure whether these 4 lines:
bpage = list_entry(pages.next, struct buffer_page, list);
list_del_init(&bpage->list);
cpu_buffer->pages = &bpage->list;
list_splice(&pages, cpu_buffer->pages);
equal to these 2 lines:
cpu_buffer->pages = pages.next;
list_del(&pages);
If there are equivalent, I think the second one
are simpler. It may be not a really necessarily cleanup.
What I asked is: if there are equivalent, could you use these two line:
cpu_buffer->pages = pages.next;
list_del(&pages);
]
[ Impact: simplify the ring buffer to help make it lockless ]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Pull linus#master to merge PER_CPU_DEF_ATTRIBUTES and alpha build fix
changes. As alpha in percpu tree uses 'weak' attribute instead of
inline assembly, there's no need for __used attribute.
Conflicts:
arch/alpha/include/asm/percpu.h
arch/mn10300/kernel/vmlinux.lds.S
include/linux/percpu-defs.h
Currently by default the output of kmemtrace is binary format instead
of human-readable output.
This patch makes the following changes:
- We'll see human-readable output by default
- We'll see binary output if 'bin' option is set
Note: you may probably need to explicitly disable context-info binary
output:
# echo 0 > options/context-info
# echo 1 > options/bin
# cat trace_pipe
v2:
- use %pF to print call_site
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A4DD0A0.5060500@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We will lose something if trace_seq->buffer[0] is 0, because the copy length
is calculated by strlen() in seq_puts(), so using seq_write() instead of
seq_puts().
There have a example:
after reboot:
# echo kmemtrace > current_tracer
# echo 0 > options/kmem_minimalistic
# cat trace
# tracer: kmemtrace
#
#
Nothing is exported, because the first byte of trace_seq->buffer[ ]
is KMEMTRACE_USER_ALLOC.
( the value of KMEMTRACE_USER_ALLOC is zero, seeing
kmemtrace_print_alloc_user() in kernel/trace/kmemtrace.c)
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A4B2351.5010300@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We already have ftrace= boot option, and this adds a similar
boot option for trace events, so allow trace events to be
enabled at boot, for boot debugging purpose.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A4ACE29.3010407@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To use boot tracer, one should pass initcall_debug as well as
ftrace=initcall to the command line.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A48735E.9050002@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Some fields for struct ftrace_graph_ret are missed
when they are exported to user.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A448FB6.5000302@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This made my machine completely frozen:
# echo 1 > /proc/sys/kernel/stack_tracer_enabled
# echo 2 > /proc/sys/kernel/stack_tracer_enabled
The cause is register_ftrace_function() was called twice.
Also fix ftrace_enabled sysctl, though seems nothing bad happened
as I tested it.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A448D17.9010305@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The first entry of the ftrace profile was always skipped when
reading trace_stat/functionX.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A443D59.4080307@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In hunting down the cause for the hwlat_detector ring buffer spew in
my failed -next builds it became obvious that folks are now treating
ring_buffer as something that is generic independent of tracing and thus,
suitable for public driver consumption.
Given that there are only a few minor areas in ring_buffer that have any
reliance on CONFIG_TRACING or CONFIG_FUNCTION_TRACER, provide stubs for
those and make it generally available.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Jon Masters <jcm@jonmasters.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090625053012.GB19944@linux-sh.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We should be able to specify [KMG] when setting trace_buf_size
boot option, as documented in kernel-parameters.txt
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A41F2DB.4020102@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When the output of set_ftrace_filter is larger than PAGE_SIZE,
t_hash_start() will be called the 2nd time, and then we start
from the head of a hlist, which is wrong and causes some entries
to be outputed twice.
The worse is, if the hlist is large enough, reading set_ftrace_filter
won't stop but in a dead loop.
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A41876E.2060407@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's rather confusing that in t_start(), in some cases @pos is
incremented, and in some cases it's decremented and then incremented.
This patch rewrites t_start() in a much more general way.
Thus we fix a bug that if ftrace_filtered == 1, functions have tracer
hooks won't be printed, because the branch is always unreachable:
static void *t_start(...)
{
...
if (!p)
return t_hash_start(m, pos);
return p;
}
Before:
# echo 'sys_open' > /mnt/tracing/set_ftrace_filter
# echo 'sys_write:traceon:4' >> /mnt/tracing/set_ftrace_filter
sys_open
After:
# echo 'sys_open' > /mnt/tracing/set_ftrace_filter
# echo 'sys_write:traceon:4' >> /mnt/tracing/set_ftrace_filter
sys_open
sys_write:traceon:count=4
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A41874B.4090507@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's wrong to increment @pos in g_start(). It causes some entries
lost when reading set_graph_function, if the output of the file
is larger than PAGE_SIZE.
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A418738.7090401@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The iterator is m->private, but it's not reset to trace_types in
t_start(). If the output is larger than PAGE_SIZE and t_start()
is called the 2nd time, things will go wrong.
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A418728.5020506@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's wrong to increment @pos in stat_seq_start(). It causes some
stat entries lost when reading stat file, if the output of the file
is larger than PAGE_SIZE.
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A418716.90209@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's wrong to increment @pos in t_start(), otherwise we'll lose
some entries when reading printk_formats, if the output is larger
than PAGE_SIZE.
Reported-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A4186FA.1020106@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While testing syscall tracepoints posted by Jason, I found 3 entries
were missing when reading available_events. The output size of
available_events is < 4 pages, which means we lost 1 entry per page.
The cause is, it's wrong to increment @pos in s_start().
Actually there's another bug here -- reading avaiable_events/set_events
can race with module unload:
# cat available_events |
s_start() |
s_stop() |
| # rmmod foo.ko
s_start() |
call = list_entry(m->private) |
@call might be freed and accessing it will lead to crash.
Reviewed-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A4186DD.6090405@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Percpu variable definition is about to be updated such that all percpu
symbols including the static ones must be unique. Update percpu
variable definitions accordingly.
* as,cfq: rename ioc_count uniquely
* cpufreq: rename cpu_dbs_info uniquely
* xen: move nesting_count out of xen_evtchn_do_upcall() and rename it
* mm: move ratelimits out of balance_dirty_pages_ratelimited_nr() and
rename it
* ipv4,6: rename cookie_scratch uniquely
* x86 perf_counter: rename prev_left to pmc_prev_left, irq_entry to
pmc_irq_entry and nmi_entry to pmc_nmi_entry
* perf_counter: rename disable_count to perf_disable_count
* ftrace: rename test_event_disable to ftrace_test_event_disable
* kmemleak: rename test_pointer to kmemleak_test_pointer
* mce: rename next_interval to mce_next_interval
[ Impact: percpu usage cleanups, no duplicate static percpu var names ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: linux-mm <linux-mm@kvack.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andi Kleen <andi@firstfloor.org>
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
tracing/urgent: warn in case of ftrace_start_up inbalance
tracing/urgent: fix unbalanced ftrace_start_up
function-graph: add stack frame test
function-graph: disable when both x86_32 and optimize for size are configured
ring-buffer: have benchmark test print to trace buffer
ring-buffer: do not grab locks in nmi
ring-buffer: add locks around rb_per_cpu_empty
ring-buffer: check for less than two in size allocation
ring-buffer: remove useless compile check for buffer_page size
ring-buffer: remove useless warn on check
ring-buffer: use BUF_PAGE_HDR_SIZE in calculating index
tracing: update sample event documentation
tracing/filters: fix race between filter setting and module unload
tracing/filters: free filter_string in destroy_preds()
ring-buffer: use commit counters for commit pointer accounting
ring-buffer: remove unused variable
ring-buffer: have benchmark test handle discarded events
ring-buffer: prevent adding write in discarded area
tracing/filters: strloc should be unsigned short
tracing/filters: operand can be negative
...
Fix up kmemcheck-induced conflict in kernel/trace/ring_buffer.c manually
Prevent from further ftrace_start_up inbalances so that we avoid
future nop patching omissions with dynamic ftrace.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Perfcounter reports the following stats for a wide system
profiling:
#
# (2364 samples)
#
# Overhead Symbol
# ........ ......
#
15.40% [k] mwait_idle_with_hints
8.29% [k] read_hpet
5.75% [k] ftrace_caller
3.60% [k] ftrace_call
[...]
This snapshot has been taken while neither the function tracer nor
the function graph tracer was running.
With dynamic ftrace, such results show a wrong ftrace behaviour
because all calls to ftrace_caller or ftrace_graph_caller (the patched
calls to mcount) are supposed to be patched into nop if none of those
tracers are running.
The problem occurs after the first run of the function tracer. Once we
launch it a second time, the callsites will never be nopped back,
unless you set custom filters.
For example it happens during the self tests at boot time.
The function tracer selftest runs, and then the dynamic tracing is
tested too. After that, the callsites are left un-nopped.
This is because the reset callback of the function tracer tries to
unregister two ftrace callbacks in once: the common function tracer
and the function tracer with stack backtrace, regardless of which
one is currently in use.
It then creates an unbalance on ftrace_start_up value which is expected
to be zero when the last ftrace callback is unregistered. When it
reaches zero, the FTRACE_DISABLE_CALLS is set on the next ftrace
command, triggering the patching into nop. But since it becomes
unbalanced, ie becomes lower than zero, if the kernel functions
are patched again (as in every further function tracer runs), they
won't ever be nopped back.
Note that ftrace_call and ftrace_graph_call are still patched back
to ftrace_stub in the off case, but not the callers of ftrace_call
and ftrace_graph_caller. It means that the tracing is well deactivated
but we waste a useless call into every kernel function.
This patch just unregisters the right ftrace_ops for the function
tracer on its reset callback and ignores the other one which is
not registered, fixing the unbalance. The problem also happens
is .30
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@kernel.org
In case gcc does something funny with the stack frames, or the return
from function code, we would like to detect that.
An arch may implement passing of a variable that is unique to the
function and can be saved on entering a function and can be tested
when exiting the function. Usually the frame pointer can be used for
this purpose.
This patch also implements this for x86. Where it passes in the stack
frame of the parent function, and will test that frame on exit.
There was a case in x86_32 with optimize for size (-Os) where, for a
few functions, gcc would align the stack frame and place a copy of the
return address into it. The function graph tracer modified the copy and
not the actual return address. On return from the funtion, it did not go
to the tracer hook, but returned to the parent. This broke the function
graph tracer, because the return of the parent (where gcc did not do
this funky manipulation) returned to the location that the child function
was suppose to. This caused strange kernel crashes.
This test detected the problem and pointed out where the issue was.
This modifies the parameters of one of the functions that the arch
specific code calls, so it includes changes to arch code to accommodate
the new prototype.
Note, I notice that the parsic arch implements its own push_return_trace.
This is now a generic function and the ftrace_push_return_trace should be
used instead. This patch does not touch that code.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On x86_32, when optimize for size is set, gcc may align the frame pointer
and make a copy of the the return address inside the stack frame.
The return address that is located in the stack frame may not be
the one used to return to the calling function. This will break the
function graph tracer.
The function graph tracer replaces the return address with a jump to a hook
function that can trace the exit of the function. If it only replaces
a copy, then the hook will not be called when the function returns.
Worse yet, when the parent function returns, the function graph tracer
will return back to the location of the child function which will
easily crash the kernel with weird results.
To see the problem, when i386 is compiled with -Os we get:
c106be03: 57 push %edi
c106be04: 8d 7c 24 08 lea 0x8(%esp),%edi
c106be08: 83 e4 e0 and $0xffffffe0,%esp
c106be0b: ff 77 fc pushl 0xfffffffc(%edi)
c106be0e: 55 push %ebp
c106be0f: 89 e5 mov %esp,%ebp
c106be11: 57 push %edi
c106be12: 56 push %esi
c106be13: 53 push %ebx
c106be14: 81 ec 8c 00 00 00 sub $0x8c,%esp
c106be1a: e8 f5 57 fb ff call c1021614 <mcount>
When it is compiled with -O2 instead we get:
c10896f0: 55 push %ebp
c10896f1: 89 e5 mov %esp,%ebp
c10896f3: 83 ec 28 sub $0x28,%esp
c10896f6: 89 5d f4 mov %ebx,0xfffffff4(%ebp)
c10896f9: 89 75 f8 mov %esi,0xfffffff8(%ebp)
c10896fc: 89 7d fc mov %edi,0xfffffffc(%ebp)
c10896ff: e8 d0 08 fa ff call c1029fd4 <mcount>
The compile with -Os will align the stack pointer then set up the
frame pointer (%ebp), and it copies the return address back into
the stack frame. The change to the return address in mcount is done
to the copy and not the real place holder of the return address.
Then compile with -O2 sets up the frame pointer first, this makes
the change to the return address by mcount affect where the function
will jump on exit.
Reported-by: Jake Edge <jake@lwn.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the output of the ring buffer benchmark/test prints to
the console. This test runs for ten seconds every ten seconds and
ouputs the result after every iteration. This needlessly fills up
the logs.
This patch makes the ring buffer benchmark/test print to the ftrace
buffer using trace_printk. To view the test results, you must examine
the debug/tracing/trace file.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it
will need to read from the ring buffer. But the read side of the
ring buffer still takes locks. This patch adds a check on the read
side that if it is in an NMI, then it will disable the ring buffer
and not take any locks.
Reads can still happen on a disabled ring buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The checking of whether the buffer is empty or not needs to be serialized
among the readers. Add the reader spin lock around it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring buffer must have at least two pages allocated for the
reader page swap to work.
The page count check will miss the case of a zero size passed in.
Even though a zero size ring buffer would probably fail an allocation,
making the min size check for less than two instead of equal to one makes
the code a bit more robust.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The original version of the ring buffer had a hack to map the
page struct that held the pages of the buffer to also be the structure
that the ring buffer would keep the pages in a link list.
This overlap of the page struct was very dangerous and that hack was
removed a while ago.
But there was a check to make sure the buffer_page never became bigger
than the page struct, and would fail the compile if it did. The
check was only meaningful when we had the hack. Now that we have separate
allocated descriptors for the buffer pages, we can remove this check.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A check if "write > BUF_PAGE_SIZE" is done right after a
if (write > BUF_PAGE_SIZE)
return ...;
Thus the check is actually testing the compiler and not the
kernel. This is useless, remove it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The index of the event is found by masking PAGE_MASK to it and
subtracting the header size. Currently the header size is calculate
by PAGE_SIZE - BUF_PAGE_SIZE, when we already have a macro
BUF_PAGE_HDR_SIZE to define it.
If we want to change BUF_PAGE_SIZE to something less than filling
the rest of the page (this is done for debugging), then we break
the algorithm to find the index.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Module unload is protected by event_mutex, while setting filter is
protected by filter_mutex. This leads to the race:
echo 'bar == 0 || bar == 10' \ |
> sample/filter |
| insmod sample.ko
add_pred("bar == 0") |
-> n_preds == 1 |
add_pred("bar == 100") |
-> n_preds == 2 |
| rmmod sample.ko
| insmod sample.ko
add_pred("&&") |
-> n_preds == 1 (should be 3) |
Now event->filter->preds is corrupted. An then when filter_match_preds()
is called, the WARN_ON() in it will be triggered.
To avoid the race, we remove filter_mutex, and replace it with event_mutex.
[ Impact: prevent corruption of filters by module removing and loading ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A375A4D.6000205@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring buffer is made up of three sets of pointers.
The head page pointer, which points to the next page for the reader to
get.
The commit pointer and commit index, which points to the page and index
of the last committed write respectively.
The tail pointer and tail index, which points to the page and the index
of the last reserved data respectively (non committed).
The commit pointer is only moved forward by the outer most writer.
If a nested writer comes in, it will not move the pointer forward.
The current implementation has a flaw. It assumes that the outer most
writer successfully reserved data. There's a small race window where
the outer most writer could find the tail pointer, but a nested
writer could come in (via interrupt) and move the tail forward, and
even the commit forward.
The outer writer would not realized the commit moved forward and the
accounting will break.
This patch changes the design to use counters in the per cpu buffers
to keep track of commits. The counters are incremented at the start
of the commit, and decremented at the end. If the end commit counter
is 1, then it moves the commit pointers. A loop is made to check for
races between checking and moving the commit pointers. Only the outer
commit should move the pointers anyway.
The test of knowing if a reserve is equal to the last commit update
is still needed to know for time keeping. The time code is much less
racey than the commit updates.
This change not only solves the mentioned race, but also makes the
code simpler.
[ Impact: fix commit race and simplify code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix the compiler error:
kernel/trace/ring_buffer.c: In function 'rb_move_tail':
kernel/trace/ring_buffer.c:1236: warning: unused variable 'event'
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the addition of commit:
c7b0930857
ring-buffer: prevent adding write in discarded area
The ring buffer may now add discarded events when a write passes
the end of a buffer page. Before, a discarded event was only added
when the tracer deliberately created one. The ring buffer benchmark
test does not handle discarded events when it reads the buffer and
fails when it encounters one.
Also fix the increment for large data entries (luckily, the test did
not add any yet).
[ Impact: fix false failure of ring buffer self test ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Many developers use "/debug/" or "/debugfs/" or "/sys/kernel/debug/"
directory name to mount debugfs filesystem for ftrace according to
./Documentation/tracers/ftrace.txt file.
And, three directory names(ex:/debug/, /debugfs/, /sys/kernel/debug/) is
existed in kernel source like ftrace, DRM, Wireless, Documentation,
Network[sky2]files to mount debugfs filesystem.
debugfs means debug filesystem for debugging easy to use by greg kroah
hartman. "/sys/kernel/debug/" name is suitable as directory name
of debugfs filesystem.
- debugfs related reference: http://lwn.net/Articles/334546/
Fix inconsistency of directory name to mount debugfs filesystem.
* From Steven Rostedt
- find_debugfs() and tracing_files() in this patch.
Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com>
Acked-by : Inaky Perez-Gonzalez <inaky@linux.intel.com>
Reviewed-by : Steven Rostedt <rostedt@goodmis.org>
Reviewed-by : James Smart <james.smart@emulex.com>
CC: Jiri Kosina <trivial@kernel.org>
CC: David Airlie <airlied@linux.ie>
CC: Peter Osterlund <petero2@telia.com>
CC: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
CC: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
CC: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'timers-for-linus-migration' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timers: Logic to move non pinned timers
timers: /proc/sys sysctl hook to enable timer migration
timers: Identifying the existing pinned timers
timers: Framework for identifying pinned timers
timers: allow deferrable timers for intervals tv2-tv5 to be deferred
Fix up conflicts in kernel/sched.c and kernel/timer.c manually
This a very tight race where an interrupt could come in and not
have enough data to put into the end of a buffer page, and that
it would fail to write and need to go to the next page.
But if this happened when another writer was about to reserver
their data, and that writer has smaller data to reserve, then
it could succeed even though the interrupt moved the tail page.
To pervent that, if we fail to store data, and by subtracting the
amount we reserved we still have room for smaller data, we need
to fill that space with "discarded" data.
[ Impact: prevent race were buffer data may be lost ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I forgot to update filter code accordingly in
"tracing/events: change the type of __str_loc_item to unsigned short"
(commt b0aae68cc5)
It can cause system crash:
# echo 1 > tracing/events/irq/irq_handler_entry/enable
# echo 'name == eth0' > tracing/events/irq/irq_handler_entry/filter
[ Impact: fix crash while filtering on __string() field ]
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A35B905.3090500@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Atomic allocation is not needed here.
[ Impact: clean up of memory alloction type ]
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A35B898.2050607@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It's tracing_cpumask_new that should be kfree()ed.
This causes tracing_cpumask to be freed due to the typo:
# echo z > tracing_cpumask
bash: echo: write error: Invalid argument
And subsequent reads/writes to tracing_cpuamsk will access this
already-freed tracing_cpumask, thus may lead to crash.
[ Impact: fix leak and crash when writing invalid val to tracing_cpumask ]
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A35B86A.7070608@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <200906122115.30787.rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This gets rid of a heap of false-positive warnings from the tracer
code due to the use of bitfields.
[rebased for mainline inclusion]
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits)
block: add request clone interface (v2)
floppy: fix hibernation
ramdisk: remove long-deprecated "ramdisk=" boot-time parameter
fs/bio.c: add missing __user annotation
block: prevent possible io_context->refcount overflow
Add serial number support for virtio_blk, V4a
block: Add missing bounce_pfn stacking and fix comments
Revert "block: Fix bounce limit setting in DM"
cciss: decode unit attention in SCSI error handling code
cciss: Remove no longer needed sendcmd reject processing code
cciss: change SCSI error handling routines to work with interrupts enabled.
cciss: separate error processing and command retrying code in sendcmd_withirq_core()
cciss: factor out fix target status processing code from sendcmd functions
cciss: simplify interface of sendcmd() and sendcmd_withirq()
cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code
cciss: Use schedule_timeout_uninterruptible in SCSI error handling code
block: needs to set the residual length of a bidi request
Revert "block: implement blkdev_readpages"
block: Fix bounce limit setting in DM
Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt
...
Manually fix conflicts with tracing updates in:
block/blk-sysfs.c
drivers/ide/ide-atapi.c
drivers/ide/ide-cd.c
drivers/ide/ide-floppy.c
drivers/ide/ide-tape.c
include/trace/events/block.h
kernel/trace/blktrace.c
* 'tracing-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
function-graph: always initialize task ret_stack
function-graph: move initialization of new tasks up in fork
function-graph: add memory barriers for accessing task's ret_stack
function-graph: enable the stack after initialization of other variables
function-graph: only allocate init tasks if it was not already done
Manually fix trivial conflict in kernel/trace/ftrace.c
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (244 commits)
Revert "x86, bts: reenable ptrace branch trace support"
tracing: do not translate event helper macros in print format
ftrace/documentation: fix typo in function grapher name
tracing/events: convert block trace points to TRACE_EVENT(), fix !CONFIG_BLOCK
tracing: add protection around module events unload
tracing: add trace_seq_vprint interface
tracing: fix the block trace points print size
tracing/events: convert block trace points to TRACE_EVENT()
ring-buffer: fix ret in rb_add_time_stamp
ring-buffer: pass in lockdep class key for reader_lock
tracing: add annotation to what type of stack trace is recorded
tracing: fix multiple use of __print_flags and __print_symbolic
tracing/events: fix output format of user stack
tracing/events: fix output format of kernel stack
tracing/trace_stack: fix the number of entries in the header
ring-buffer: discard timestamps that are at the start of the buffer
ring-buffer: try to discard unneeded timestamps
ring-buffer: fix bug in ring_buffer_discard_commit
ftrace: do not profile functions when disabled
tracing: make trace pipe recognize latency format flag
...
When reading the trace buffer, there is a race that when a module
is unloaded it removes events that is stilled referenced in the buffers.
This patch adds the protection around the unloading of the events
from modules and the reading of the trace buffers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The code to update the print formats for events requires a vprintf
format in the trace_seq. This patch adds that interface.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
TRACE_EVENT is a more generic way to define tracepoints. Doing so adds
these new capabilities to this tracepoint:
- zero-copy and per-cpu splice() tracing
- binary tracing without printf overhead
- structured logging records exposed under /debug/tracing/events
- trace events embedded in function tracer output and other plugins
- user-defined, per tracepoint filter expressions
...
Cons:
- no dev_t info for the output of plug, unplug_timer and unplug_io events.
no dev_t info for getrq and sleeprq events if bio == NULL.
no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL.
This is mainly because we can't get the deivce from a request queue.
But this may change in the future.
- A packet command is converted to a string in TP_assign, not TP_print.
While blktrace do the convertion just before output.
Since pc requests should be rather rare, this is not a big issue.
- In blktrace, an event can have 2 different print formats, but a TRACE_EVENT
has a unique format, which means we have some unused data in a trace entry.
The overhead is minimized by using __dynamic_array() instead of __array().
I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing:
dd dd + ioctl blktrace dd + TRACE_EVENT (splice)
1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s
2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s
3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s
So the overhead of tracing is very small, and no regression when using
those trace events vs blktrace.
And the binary output of TRACE_EVENT is much smaller than blktrace:
# ls -l -h
-rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0
-rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1
-rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out
Following are some comparisons between TRACE_EVENT and blktrace:
plug:
kjournald-480 [000] 303.084981: block_plug: [kjournald]
kjournald-480 [000] 303.084981: 8,0 P N [kjournald]
unplug_io:
kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1
kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1
remap:
kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384
kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384
bio_backmerge:
kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald]
kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald]
getrq:
kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald]
kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald]
bash-2066 [001] 1072.953770: 8,0 G N [bash]
bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash]
rq_complete:
konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0]
konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0]
ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0]
ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0]
rq_insert:
kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald]
kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald]
Changelog from v2 -> v3:
- use the newly introduced __dynamic_array().
Changelog from v1 -> v2:
- use __string() instead of __array() to minimize the memory required
to store hex dump of rq->cmd().
- support large pc requests.
- add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT.
- some cleanups.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The update of ret got mistakenly added to the if statement of
rb_try_to_discard. The variable ret should be 1 on commit and zero
otherwise.
[ Impact: fix compiler warning and real bug ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On Sun, 7 Jun 2009, Ingo Molnar wrote:
> Testing tracer sched_switch: <6>Starting ring buffer hammer
> PASSED
> Testing tracer sysprof: PASSED
> Testing tracer function: PASSED
> Testing tracer irqsoff:
> =============================================
> PASSED
> Testing tracer preemptoff: PASSED
> Testing tracer preemptirqsoff: [ INFO: possible recursive locking detected ]
> PASSED
> Testing tracer branch: 2.6.30-rc8-tip-01972-ge5b9078-dirty #5760
> ---------------------------------------------
> rb_consumer/431 is trying to acquire lock:
> (&cpu_buffer->reader_lock){......}, at: [<c109eef7>] ring_buffer_reset_cpu+0x37/0x70
>
> but task is already holding lock:
> (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0
>
> other info that might help us debug this:
> 1 lock held by rb_consumer/431:
> #0: (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0
The ring buffer is a generic structure, and can be used outside of
ftrace. If ftrace traces within the use of the ring buffer, it can produce
false positives with lockdep.
This patch passes in a static lock key into the allocation of the ring
buffer, so that different ring buffers will have their own lock class.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1244477919.13761.9042.camel@twins>
[ store key in ring buffer descriptor ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The current method of printing out a stack trace is to add a new line
and print out the trace:
yum-updatesd-3120 [002] 573.691303:
=> do_softirq
=> irq_exit
=> smp_apic_timer_interrupt
=> apic_timer_interrupt
This looks a bit awkward, and if we have both stack and user stack traces
running, it would be nice to have a title to tell them apart, although
it is easy to tell by the output.
This patch adds an annotation to the start of the stack traces:
init-1 [003] 929.304979: <stack trace>
=> user_path_at
=> vfs_fstatat
=> vfs_stat
=> sys_newstat
=> system_call_fastpath
cat-3459 [002] 1016.824040: <user stack trace>
=> <0000003aae6c0250>
=> <00007ffff4b06ae4>
=> <69636172742f6775>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Here is an updated patch to include the extra call to
trace_seq_init() as requested. This is vs. the latest
-tip tree and fixes the use of multiple __print_flags
and __print_symbolic in a single tracer. Also tested
to ensure its working now:
mount.gfs2-2534 [000] 235.850587: gfs2_glock_queue: 8.7 glock 1:2 dequeue PR
mount.gfs2-2534 [000] 235.850591: gfs2_demote_rq: 8.7 glock 1:0 demote EX to NL flags:DI
mount.gfs2-2534 [000] 235.850591: gfs2_glock_queue: 8.7 glock 1:0 dequeue EX
glock_workqueue-2529 [000] 235.850666: gfs2_glock_state_change: 8.7 glock 1:0 state EX => NL tgt:NL dmt:NL flags:lDpI
glock_workqueue-2529 [000] 235.850672: gfs2_glock_put: 8.7 glock 1:0 state NL => IV flags:I
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
LKML-Reference: <1244037123.29604.603.camel@localhost.localdomain>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
According to "events/ftrace/user_stack/format", fix the output of
user stack.
before fix:
sh-1073 [000] 31.137561: <b7f274fe> <- <0804e33c> <- <080835c1>
after fix:
sh-1072 [000] 37.039329:
=> <b7f8a4fe>
=> <0804e33c>
=> <080835c1>
Signed-off-by: walimis <walimisdev@gmail.com>
LKML-Reference: <1244016090-7814-3-git-send-email-walimisdev@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
According to "events/ftrace/kernel_stack/format", output format of
kernel stack should use "=>" instead of "<=".
The second problem is that we shouldn't skip the first entry in the stack,
although it seems to be duplicated when used in the "function" tracer,
but events also use it. If we skip the first one, we will drop the topmost
entry of the stack.
The last problem is that if the last entry is ULONG_MAX(0xffffffff), we should
drop it, otherwise it will print a NULL name line.
before fix:
sh-1072 [000] 26.957239: sched_process_fork: parent sh:1072 child sh:1073
sh-1072 [000] 26.957262:
<= syscall_call
<=
sh-1072 [000] 26.957744: sched_switch: task sh:1072 [120] (R) ==> sh:1073 [120]
sh-1072 [000] 26.957752:
<= preempt_schedule
<= wake_up_new_task
<= do_fork
<= sys_clone
<= syscall_call
<=
After fix:
sh-1075 [000] 39.791848: sched_process_fork: parent sh:1075 child sh:1076
sh-1075 [000] 39.791871:
=> sys_clone
=> syscall_call
sh-1075 [000] 39.792713: sched_switch: task sh:1075 [120] (R) ==> sh:1076 [120]
sh-1075 [000] 39.792722:
=> schedule
=> preempt_schedule
=> wake_up_new_task
=> do_fork
=> sys_clone
=> syscall_call
Signed-off-by: walimis <walimisdev@gmail.com>
LKML-Reference: <1244016090-7814-2-git-send-email-walimisdev@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The last entry in the stack_dump_trace is ULONG_MAX, which is not
a valid entry, but max_stack_trace.nr_entries has accounted for it.
So when printing the header, we should decrease it by one.
Before fix, print as following, for example:
Depth Size Location (53 entries) <--- should be 52
----- ---- --------
0) 3264 108 update_wall_time+0x4d5/0x9a0
...
51) 80 80 syscall_call+0x7/0xb
^^^
it's correct.
Signed-off-by: walimis <walimisdev@gmail.com>
LKML-Reference: <1244016090-7814-1-git-send-email-walimisdev@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Every buffer page in the ring buffer includes its own time stamp.
When an event is recorded to the ring buffer with a delta time greater
than what can be held in the event header, a time stamp event is created.
If the the create timestamp falls over to the next buffer page, it is
redundant because the buffer page holds a full time stamp. This patch
will try to discard the time stamp when it falls to the start of the
next page.
This change also fixes a issues with disarding events. If most events are
discarded, timestamps will start to creep into the ring buffer. If we
do not discard the timestamps then they can fill up the ring buffer over
time and waste space.
This change will keep time stamps from filling up over another page. If
something is recorded in the buffer page, and the rest is filtered, then
the time stamps can only fill up to the end of the page.
[ Impact: prevent time stamps from filling ring buffer ]
Reported-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are times that a race may happen that we add a timestamp in a
nested write. This timestamp would just contain a zero delta and serves
no purpose.
Now that we have a way to discard events, this patch will try to discard
the timestamp instead of just wasting the space in the ring buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a bug in ring_buffer_discard_commit. The wrong
pointer is being compared in order to check if the event
can be freed from the buffer rather than discarded
(i.e. marked as PAD).
I noticed this when I was working on duration filtering.
The bug is not deadly - it just results in lots of wasted
space in the buffer. All filtered events are left in
the buffer and marked as discarded, rather than being
removed from the buffer to make space for other events.
Unfortunately, when I fixed this bug, I got errors doing a
filtered function trace. Multiple TIME_EXTEND
events pile up in the buffer, and trigger the
following loop overage warning in rb_iter_peek():
again:
...
if (RB_WARN_ON(cpu_buffer, ++nr_loops > 10))
return NULL;
I'm not sure what the best way is to fix this. I don't
know if I should extend the loop threshhold, or if I should
make the test more complex (ignore TIME_EXTEND
events), or just get rid of this loop check completely.
Note that if I implement a workaround for this, then I
see another problem from rb_advance_iter(). I haven't
tracked that one down yet.
In general, it seems like the case of removing filtered
events has not been working properly, and so some assumptions
about buffer invariant conditions need to be revisited.
Here's the patch for the simple fix:
Compare correct pointer for checking if an event can be
freed rather than left as discarded in the buffer.
Signed-off-by: Tim Bird <tim.bird@am.sony.com>
LKML-Reference: <4A25BE9E.5090909@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ksym_tracer_mutex is declared inside an #ifdef CONFIG_PROFILE_KSYM_TRACER
section. This makes it unavailable for the hardware breakpoint tracer if it is
configured without the breakpoint profiler.
This patch fixes the following build error:
kernel/trace/trace_ksym.c: In function ‘ksym_trace_filter_read’:
kernel/trace/trace_ksym.c:226: erreur: ‘ksym_tracer_mutex’ undeclared (first use in this function)
kernel/trace/trace_ksym.c:226: erreur: (Each undeclared identifier is reported only once
kernel/trace/trace_ksym.c:226: erreur: for each function it appears in.)
kernel/trace/trace_ksym.c: In function ‘ksym_trace_filter_write’:
kernel/trace/trace_ksym.c:273: erreur: ‘ksym_tracer_mutex’ undeclared (first use in this function)
kernel/trace/trace_ksym.c: In function ‘ksym_trace_reset’:
kernel/trace/trace_ksym.c:335: erreur: ‘ksym_tracer_mutex’ undeclared (first use in this function)
make[1]: *** [kernel/trace/trace_ksym.o] Erreur 1
[ Impact: fix a build error ]
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
On creating a new task while running the function graph tracer, if
we fail to allocate the ret_stack, and then fail the fork, the
code will free the parent ret_stack. This is because the child
duplicated the parent and currently points to the parent's ret_stack.
This patch always initializes the task's ret_stack to NULL.
[ Impact: prevent crash of parent on low memory during fork ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds an ftrace plugin to detect and profile memory access over kernel
variables. It uses HW Breakpoint interfaces to 'watch memory addresses.
Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The code that handles the tasks ret_stack allocation for every task
assumes that only an interrupt can cause issues (even though interrupts
are disabled).
In reality, the code is allocating the ret_stack for tasks that may be
running on other CPUs and there are not efficient memory barriers to
handle this case.
[ Impact: prevent crash due to using of uninitialized ret_stack variables ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function graph tracer checks if the task_struct has ret_stack defined
to know if it is OK or not to use it. The initialization is done for
all tasks by one process, but the idle tasks use the same initialization
used by new tasks.
If an interrupt happens on an idle task that just had the ret_stack
created, but before the rest of the initialization took place, then
we can corrupt the return address of the functions.
This patch moves the setting of the task_struct's ret_stack to after
the other variables have been initialized.
[ Impact: prevent kernel panic on idle task when starting function graph ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the function graph tracer is enabled, it calls the initialization
needed for the init tasks that would be called on all created tasks.
The problem is that this is called every time the function graph tracer
is enabled, and the ret_stack is allocated for the idle tasks each time.
Thus, the old ret_stack is lost and a memory leak is created.
This is also dangerous because if an interrupt happened on another CPU
with the init task and the ret_stack is replaced, we then lose all the
return pointers for the interrupt, and a crash would take place.
[ Impact: fix memory leak and possible crash due to race ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A race was found that if one were to enable and disable the function
profiler repeatedly, then the system can panic. This was because a profiled
function may be preempted just before disabling interrupts. While
the profiler is disabled and then reenabled, the preempted function
could start again, and access the hash as it is being initialized.
This just adds a check in the irq disabled part to check if the profiler
is enabled, and if it is not then it will just exit.
When the system is disabled, the profile_enabled variable is cleared
before calling the unregistering of the function profiler. This
unregistering calls stop machine which also acts as a synchronize schedule.
[ Impact: fix panic in enabling/disabling function profiler ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_pipe did not recognize the latency format flag and would produce
different output than the trace file. The problem was partly due that
the trace flags in the iterator was not set as well as the trace_pipe
zeros out part of the iterator (including the flags) to be able to use
the same routines as the trace file. trace_flags of the iterator should
not cause any problems when not zeroed out by for trace_pipe.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A patch to allow the use of __print_symbolic and __print_flags
from a module. This allows the current GFS2 tracing patch to
build.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
LKML-Reference: <1243868015.29604.542.camel@localhost.localdomain>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
__string() is limited:
- it's a char array, but we may want to define array with other types
- a source string should be available, but we may just know the string size
We introduce __dynamic_array() to break those limitations, and __string()
becomes a wrapper of it. As a side effect, now __get_str() can be used
in TP_fast_assign but not only TP_print.
Take XFS for example, we have the string length in the dirent, but the
string itself is not NULL-terminated, so __dynamic_array() can be used:
TRACE_EVENT(xfs_dir2,
TP_PROTO(struct xfs_da_args *args),
TP_ARGS(args),
TP_STRUCT__entry(
__field(int, namelen)
__dynamic_array(char, name, args->namelen + 1)
...
),
TP_fast_assign(
char *name = __get_str(name);
if (args->namelen)
memcpy(name, args->name, args->namelen);
name[args->namelen] = '\0';
__entry->namelen = args->namelen;
),
TP_printk("name %.*s namelen %d",
__entry->namelen ? __get_str(name) : NULL
__entry->namelen)
);
[ Impact: allow defining dynamic size arrays ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2384D2.3080403@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Both event tracer and sched switch plugin are selected by default
by all generic tracers. But if no generic tracer is enabled, their options
appear. But ether one of them will select the other, thus it only
makes sense to have the default tracers be selected by one option.
[ Impact: clean up kconfig menu ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are two options that are selected by all tracers, but we want
to have those options available when no tracer is selected. These are
The event tracer and sched switch tracer.
The are enabled by all tracers, but if a tracer is not selected we want
the options to appear. All tracers including them select TRACING.
Thus what we would like to do is:
config EVENT_TRACER
bool "prompt"
depends on TRACING
select TRACING
But that gives us a bug in the kbuild system since we just created a
circular dependency. We only want the prompt to show when TRACING is off.
This patch adds GENERIC_TRACER that all tracers will select instead of
TRACING. The two options (sched switch and event tracer) will select
TRACING directly and depend on !GENERIC_TRACER. This solves the cicular
dependency.
[ Impact: hide options that are selected by default ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When using ftrace=function on the command line to trace functions
on boot up, one can not filter out functions that are commonly called.
This patch adds two new ftrace command line commands.
ftrace_notrace=function-list
ftrace_filter=function-list
Where function-list is a comma separated list of functions to filter.
The ftrace_notrace will make the functions listed not be included
in the function tracing, and ftrace_filter will only trace the functions
listed.
These two act the same as the debugfs/tracing/set_ftrace_notrace and
debugfs/tracing/set_ftrace_filter respectively.
The simple glob expressions that are allowed by the filter files can also
be used by the command line interface.
ftrace_notrace=rcu*,*lock,*spin*
Will not trace any function that starts with rcu, ends with lock, or has
the word spin in it.
Note, if the self tests are enabled, they may interfere with the filtering
set by the command lines.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
register_stat_tracer() uses list_for_each_entry_safe
to check whether a tracer is already present in the list.
But we don't delete anything from the list here, so
we don't need the safe version
[ Impact: cleanup list use is stat tracing ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
- remove duplicate code in stat_seq_init()
- update comments to reflect the change from stat list to stat rbtree
[ Impact: clean up ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
When closing a trace_stat file, we destroy the rbtree constructed during
file open, but there is memory leak that the root node is not freed.
[ Impact: fix memory leak when closing a trace_stat file ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Currently the output of trace_stat/workqueues is totally reversed:
# cat /debug/tracing/trace_stat/workqueues
...
1 17 17 210 37 `-blk_unplug_work+0x0/0x57
1 3779 3779 181 11 |-cfq_kick_queue+0x0/0x2f
1 3796 3796 kblockd/1:120
...
The correct output should be:
1 3796 3796 kblockd/1:120
1 3779 3779 181 11 |-cfq_kick_queue+0x0/0x2f
1 17 17 210 37 `-blk_unplug_work+0x0/0x57
It's caused by "tracing/stat: replace linked list by an rbtree for
sorting"
(53059c9b67a62a3dc8c80204d3da42b9267ea5a0).
dummpy_cmp() should return -1, so rb_node will always be inserted as
right-most node in the rbtree, thus we sort the output in ascending
order.
[ Impact: fix the output of trace_stat/workqueues ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
When the stat tracing framework prepares the entries from a tracer
to output them to the user, it starts by computing a linear sort
through a linked list to give the entries ordered by relevance
to the user.
This is quite ugly and causes a small latency when we begin to
read the file.
This patch changes that by turning the linked list into a red-black
tree. Athough the whole iteration using the start and next tracer
callbacks while opening the file remain the same, it is now much
more fast and scalable.
The rbtree guarantees O(log(n)) insertions whereas a linked
list with linear sorting brought us a O(n) despair. Now the
(visible) latency has disapeared.
[ Impact: kill the latency while starting to read a stat tracer file ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The "trace" prefix in struct trace_stat_session type is annoying while
reading the trace_stat.c file. It makes the lines longer, and
is not that much useful to explain the sense of this type.
Just keep "struct stat_session" for this type.
[ Impact: make the code a bit more readable ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The blankline between each cpu's workqueue stat is not necessary, because
the cpu number is enough to part them by eye.
Old style also caused a blankline below headline, and made code complex
by using lock, disableirq and get cpu var.
Old style:
# CPU INSERTED EXECUTED NAME
# | | | |
0 8644 8644 events/0
0 0 0 cpuset
...
0 1 1 kdmflush
1 35365 35365 events/1
...
New style:
# CPU INSERTED EXECUTED NAME
# | | | |
0 8644 8644 events/0
0 0 0 cpuset
...
0 1 1 kdmflush
1 35365 35365 events/1
...
[ Impact: provide more readable code ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
cpu_workqueue_stats->first_entry is useless because we can retrieve the
header of a cpu workqueue using:
if (&cpu_workqueue_stats->list == workqueue_cpu_stat(cpu)->list.next)
[ Impact: cleanup ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
No need to use list_for_each_entry_safe() in iteration without deleting
any node, we can use list_for_each_entry() instead.
[ Impact: cleanup ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
v3: zhaolei@cn.fujitsu.com: Change TRACE_EVENT definition to new format
introduced by Steven Rostedt: consolidate trace and trace_event headers
v2: kosaki@jp.fujitsu.com: print the function names instead of addr, and zap
the work addr
v1: zhaolei@cn.fujitsu.com: Make workqueue tracepoints use TRACE_EVENT macro
TRACE_EVENT is a more generic way to define tracepoints.
Doing so adds these new capabilities to the tracepoints:
- zero-copy and per-cpu splice() tracing
- binary tracing without printf overhead
- structured logging records exposed under /debug/tracing/events
- trace events embedded in function tracer output and other plugins
- user-defined, per tracepoint filter expressions
Then, this patch converts DEFINE_TRACE to TRACE_EVENT in workqueue related
tracepoints.
[ Impact: expand workqueue tracer to events tracing ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
This patch adds __print_symbolic which is similar to __print_flags but
works for an enumeration type instead. That is, there is only a one to one
mapping between the values and the symbols. When a match is made, then
it is printed, otherwise the hex value is outputed.
[ Impact: add interface for showing symbol names in events ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Developers have been asking for the ability in the ftrace event tracer
to display names of bits in a flags variable.
Instead of printing out c2, it would be easier to read FOO|BAR|GOO,
assuming that FOO is bit 1, BAR is bit 6 and GOO is bit 7.
Some examples where this would be useful are the state flags in a context
switch, kmalloc flags, and even permision flags in accessing files.
[
v2 changes include:
Frederic Weisbecker's idea of using a mask instead of bits,
thus we can output GFP_KERNEL instead of GPF_WAIT|GFP_IO|GFP_FS.
Li Zefan's idea of allowing the caller of __print_flags to add their
own delimiter (or no delimiter) where we can get for file permissions
rwx instead of r|w|x.
]
[
v3 changes:
Christoph Hellwig's idea of using an array instead of va_args.
]
[ Impact: better displaying of flags in trace output ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Always use ftrace_event_enable_disable() to enable/disable an event
so that we can factorize out the event toggling code.
[ Impact: factorize and cleanup event tracing code ]
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4A14FDFE.2080402@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
I found that there is nothing to protect event_hash in
ftrace_find_event(). Rcu protects the event hashlist
but not the event itself while we use it after its extraction
through ftrace_find_event().
This lack of a proper locking in this spot opens a race
window between any event dereferencing and module removal.
Eg:
--Task A--
print_trace_line(trace) {
event = find_ftrace_event(trace)
--Task B--
trace_module_remove_events(mod) {
list_trace_events_module(ev, mod) {
unregister_ftrace_event(ev->event) {
hlist_del(ev->event->node)
list_del(....)
}
}
}
|--> module removed, the event has been dropped
--Task A--
event->print(trace); // Dereferencing freed memory
If the event retrieved belongs to a module and this module
is concurrently removed, we may end up dereferencing a data
from a freed module.
RCU could solve this, but it would add latency to the kernel and
forbid tracers output callbacks to call any sleepable code.
So this fix converts 'trace_event_mutex' to a read/write semaphore,
and adds trace_event_read_lock() to protect ftrace_find_event().
[ Impact: fix possible freed memory dereference in ftrace ]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4A114806.7090302@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
register_module_notifier() returns zero in the success case.
So fix the inverted fail case check in trace events modules
handler.
[ Impact: fix spurious warning on ftrace initialization]
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
debugfs directory entries for devices are not removed on some
of the failure pathes in do_blk_trace_setup().
One way to reproduce is to start blktrace on multiple devices
with insufficient Vmalloc space: Devices will fail with
a message like this:
BLKTRACESETUP(2) /dev/sdu failed: 5/Input/output error
If so, the respective entries in debugfs
(e.g. /sys/kernel/debug/block/sdu) will remain and subsequent
attempts to start blktrace on the respective devices will not
succeed due to existing directories.
[ Impact: fix /debug/tracing file cleanup corner case ]
Signed-off-by: Stefan Raspl <stefan.raspl@linux.vnet.ibm.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: schwidefsky@de.ibm.com
Cc: heiko.carstens@de.ibm.com
LKML-Reference: <4A1266CC.5040801@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
return zero should be correct, so fix it.
[ Impact: eliminate incorrect syslog message ]
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: rostedt@goodmis.org
LKML-Reference: <1242545498-7285-1-git-send-email-tom.leiming@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We should leave the last slot for the ending '\0'.
[ Impact: fix possible crash when the length of an operand is 128 ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A0CDC8C.30602@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[ Impact: fix deadlock in a rare case we fail to allocate memory ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A0CDC6F.7070200@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The stack tracer stores eight entries in the ring buffer when an event
traces the stack. The output outputs all eight entries regardless of
how many entries were recorded.
This patch breaks out of the loop when a null entry is discovered.
[ Impact: only print the stack that is recorded ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* Arun R Bharadwaj <arun@linux.vnet.ibm.com> [2009-04-16 12:11:36]:
The following pinned hrtimers have been identified and marked:
1)sched_rt_period_timer
2)tick_sched_timer
3)stack_trace_timer_fn
[ tglx: fixup the hrtimer pinned mode ]
Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This is a bit of micro-optimizations. But since the ring buffer is used
in tracing every function call, it is an extreme hot path. Every nanosecond
counts.
This change shows over 5% improvement in the ring-buffer-benchmark.
[ Impact: more efficient code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring_buffer_time_stamp that is exported adds a little more overhead
than is needed for using it internally. This patch adds an internal
timestamp function that can be inlined (a single line function)
and used internally for the ring buffer.
[ Impact: a little less overhead to the ring buffer ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Doing some small changes in the fast path of the ring buffer recording
saves over 3% in the ring-buffer-benchmark test.
[ Impact: a little faster ring buffer recording ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The event length is calculated and passed in to rb_reserve_next_event
in two different locations. Having rb_reserve_next_event do the
calculations directly makes only one location to do the change and
causes the calculation to be inlined by gcc.
Before:
text data bss dec hex filename
16538 24 12 16574 40be kernel/trace/ring_buffer.o
After:
text data bss dec hex filename
16490 24 12 16526 408e kernel/trace/ring_buffer.o
[ Impact: smaller more efficient code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The rb_reserve_next_event is only called for the data type (type = 0).
There is no reason to pass in the type to the function.
Before:
text data bss dec hex filename
16554 24 12 16590 40ce kernel/trace/ring_buffer.o
After:
text data bss dec hex filename
16538 24 12 16574 40be kernel/trace/ring_buffer.o
[ Impact: cleaner, smaller and slightly more efficient code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Although we check if "missed" is not zero, we divide by hit + missed,
and the addition can possible overflow and become a divide by zero.
This patch checks for this case, and will report it when it happens
then modify "hit" to make the calculation be non zero.
[ Impact: prevent possible divide by zero in ring-buffer-benchmark ]
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The use of numeric constants is discouraged. It is cleaner and more
descriptive to use macros for constant time conversions.
This patch also removes an extra new line.
[ Impact: more descriptive time conversions ]
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
struct request has had a few different ways to represent some
properties of a request. ->hard_* represent block layer's view of the
request progress (completion cursor) and the ones without the prefix
are supposed to represent the issue cursor and allowed to be updated
as necessary by the low level drivers. The thing is that as block
layer supports partial completion, the two cursors really aren't
necessary and only cause confusion. In addition, manual management of
request detail from low level drivers is cumbersome and error-prone at
the very least.
Another interesting duplicate fields are rq->[hard_]nr_sectors and
rq->{hard_cur|current}_nr_sectors against rq->data_len and
rq->bio->bi_size. This is more convoluted than the hard_ case.
rq->[hard_]nr_sectors are initialized for requests with bio but
blk_rq_bytes() uses it only for !pc requests. rq->data_len is
initialized for all request but blk_rq_bytes() uses it only for pc
requests. This causes good amount of confusion throughout block layer
and its drivers and determining the request length has been a bit of
black magic which may or may not work depending on circumstances and
what the specific LLD is actually doing.
rq->{hard_cur|current}_nr_sectors represent the number of sectors in
the contiguous data area at the front. This is mainly used by drivers
which transfers data by walking request segment-by-segment. This
value always equals rq->bio->bi_size >> 9. However, data length for
pc requests may not be multiple of 512 bytes and using this field
becomes a bit confusing.
In general, having multiple fields to represent the same property
leads only to confusion and subtle bugs. With recent block low level
driver cleanups, no driver is accessing or manipulating these
duplicate fields directly. Drop all the duplicates. Now rq->sector
means the current sector, rq->data_len the current total length and
rq->bio->bi_size the current segment length. Everything else is
defined in terms of these three and available only through accessors.
* blk_recalc_rq_sectors() is collapsed into blk_update_request() and
now handles pc and fs requests equally other than rq->sector update.
This means that now pc requests can use partial completion too (no
in-kernel user yet tho).
* bio_cur_sectors() is replaced with bio_cur_bytes() as block layer
now uses byte count as the primary data length.
* blk_rq_pos() is now guranteed to be always correct. In-block users
converted.
* blk_rq_bytes() is now guaranteed to be always valid as is
blk_rq_sectors(). In-block users converted.
* blk_rq_sectors() is now guaranteed to equal blk_rq_bytes() >> 9.
More convenient one is used.
* blk_rq_bytes() and blk_rq_cur_bytes() are now inlined and take const
pointer to request.
[ Impact: API cleanup, single way to represent one property of a request ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Implement accessors - blk_rq_pos(), blk_rq_sectors() and
blk_rq_cur_sectors() which return rq->hard_sector, rq->hard_nr_sectors
and rq->hard_cur_sectors respectively and convert direct references of
the said fields to the accessors.
This is in preparation of request data length handling cleanup.
Geert : suggested adding const to struct request * parameter to accessors
Sergei : spotted error in patch description
[ Impact: cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Ackec-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Other parts of the kernel may need to be able to enable or disable
specific events. Especially parts that create trace events.
[ Impact: allow enabling of trace events by those that create the event ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 8f31bfe538
tracing/events: clean up for ftrace_set_clr_event()
Moved out the code for ftrace_set_clr_event into a helper funciton but
did not initialize the return value. As a result, we do not warn about
a typo in the echoing of events in set_event.
This patch restores the old warning:
# echo foobar > set_event
-bash: echo: write error: Invalid argument
[ Impact: restore warning of invalid entries to set_event ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A smarter way to figure out the output of an enable file.
[ Impact: clean up ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A0399A5.2080603@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a helper function __ftrace_set_clr_event(), and replace some
ftrace_set_clr_event() calls with this helper, thus we don't need any
kstrdup() or kmalloc().
As a side effect, this patch fixes an issue in self tests code, which is
similar to the one fixed in commit d6bf81ef0f
("tracing: append ":*" to internal setting of system events")
It's a small issue and won't cause any bug in fact, but we should do things
right anyway.
[ Impact: prevent spurious event-enabling in tracing self-tests ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A03998E.3020503@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There's a WARN_ON in the ring buffer code that makes sure preemption
is disabled. It checks "!preempt_count()". But when CONFIG_PREEMPT is not
enabled, preempt_count() is always zero, and this will trigger the warning.
[ Impact: prevent false warning on non preemptible kernels ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It is nice to see the overhead of the benchmark test when tracing is
disabled. That is, we turn off the ring buffer just to see what the
cost of running the loop that calls into the ring buffer is.
Currently, if no entries wer made, we get 0. This is not informative.
This patch changes it to check if we had any "missed" (non recorded)
events. If so, a total count is also reported.
[ Impact: evaluate the over head of the ring buffer benchmark test ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Calling cond_resched at every iteration of the loop adds a bit of
overhead to the benchmark.
This patch does two things.
1) only calls cond-resched when CONFIG_PREEMPT is not enabled
2) only calls cond-resched after so many traces has been performed.
[ Impact: less overhead to the ring-buffer-benchmark ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tracing can be very helpful to debug the kernel. When DEBUG_KERNEL is
enabled it is nice to enable the trace menu as well.
This patch only make the tracing menu enabled by default, it does not
make any of the tracers enabled. And the menu is only enabled by
default if DEBUG_KERNEL is enabled.
[ Impact: show tracing options to those debugging the kernel ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The system enabling of events uses the same code as the set_event file.
It passes in the name of the system to the parser and that will enable
all the events that has that system as a name.
The problem is that it will also enable events with the same name as the
system.
If you have system name foo, and system name bar, but within the system
bar, there exists an event called foo. By setting the system name foo,
you will also be enabling the event foo in the system bar. This is not
an expected result.
The solution is to pass in "foo:*", which will only enable the system
foo and not events called foo.
[ Impact: prevent accidental enabling of events with same name as a system ]
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Ingo Molnar thought that the code to calculate the time in cond_resched
is a bit too ugly and is not needed. This patch removes it and replaces
it with a simple call to cond_resched. I kept the comment that explains
the reason for the cond_resched.
[ Impact: remove ugly code ]
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Merge reason: this topic is ready for upstream now. It passed
Oleg's review and Andrew had no further mm/*
objections/observations either.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge reason: tracing/core was on a .30-rc1 base and was missing out on
on a handful of tracing fixes present in .30-rc5-almost.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In filter_add_subsystem_pred() we should release event_mutex before
calling filter_free_subsystem_preds(), since both functions hold
event_mutex.
[ Impact: fix deadlock when writing invalid pred into subsystem filter ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: tzanussi@gmail.com
Cc: a.p.zijlstra@chello.nl
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
LKML-Reference: <4A028993.7020509@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we set a filter for an event, such as:
echo "name == my_lock_name" > \
/debug/tracing/events/lockdep/lock_acquired/filter
then the following order of token type is parsed:
- space
- operator
- parentheses
- operand
Because the operators and parentheses have a higher precedence
than the operand characters, which is normal, then we can't
use any string containing such special characters:
()=<>!&|
To get this support and also avoid ambiguous intepretation from
the parser or the human, we can do it using double quotes so that
we keep the usual languages habits.
Then after this patch you can still declare string condition like
before:
echo name == myname
But if you want to compare against a string containing an operator
character, you can use double quotes:
echo 'name == "&myname"'
Don't forget to include the whole expression into single quotes or
the double ones will be eaten by echo.
[ Impact: support strings with special characters for tracing filters ]
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Currently the filtering infrastructure supports well the
numeric types and fixed sized array types.
But the recently added __string() field uses a specific
indirect offset mechanism which requires a specific
predicate. Until now it wasn't supported.
This patch adds this support and implies very few changes,
only a new predicate is needed, the management of this specific
field can be done through the usual string helpers in the
filtering infrastructure.
[ Impact: support all kinds of strings in the tracing filters ]
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
With the current event directory, you can only enable individual events.
The file debugfs/tracing/set_event is used to be able to enable or
disable several events at once. But that can still be awkward.
This patch adds hierarchical enabling of events. That is, each directory
in debugfs/tracing/events has an "enable" file. This file can enable
or disable all events within the directory and below.
# echo 1 > /debugfs/tracing/events/enable
will enable all events.
# echo 1 > /debugfs/tracing/events/sched/enable
will enable all events in the sched subsystem.
# echo 1 > /debugfs/tracing/events/enable
# echo 0 > /debugfs/tracing/events/irq/enable
will enable all events, but then disable just the irq subsystem events.
When reading one of these enable files, there are four results:
0 - all events this file affects are disabled
1 - all events this file affects are enabled
X - there is a mixture of events enabled and disabled
? - this file does not affect any event
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Li Zefan found that there's a race using the event ids of events and
modules. When a module is loaded, an event id is incremented. We only
have 16 bits for event ids (65536) and there is a possible (but highly
unlikely) race that we could load and unload a module that registers
events so many times that the event id counter overflows.
When it overflows, it then restarts and goes looking for available
ids. An id is available if it was added by a module and released.
The race is if you have one module add an id, and then is removed.
Another module loaded can use that same event id. But if the old module
still had events in the ring buffer, the new module's call back would
get bogus data. At best (and most likely) the output would just be
garbage. But if the module for some reason used pointers (not recommended)
then this could potentially crash.
The safest thing to do is just reset the ring buffer if a module that
registered events is removed.
[ Impact: prevent unpredictable results of event id overflows ]
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <49FEAFD0.30106@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring buffer benchmark/test runs a producer for 10 seconds.
This is done with preemption and interrupts enabled. But if the kernel
is not compiled with CONFIG_PREEMPT, it basically stops everything
but interrupts for 10 seconds.
Although this is just a test and is not for production, this attribute
can be quite annoying. It can also spawn badness elsewhere.
This patch solves the issues by calling "cond_resched" when the system
is not compiled with CONFIG_PREEMPT. It also keeps track of the time
spent to call cond_resched such that it does not go against the
time calculations. That is, if the task schedules away, the time scheduled
out is removed from the test data. Note, this only works for non PREEMPT
because we do not know when the task is scheduled out if we have PREEMPT
enabled.
[ Impact: prevent test from stopping the world for 10 seconds ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Ingo Molnar thought the code would be cleaner if we used a function call
instead of a goto for moving the tail page. After implementing this,
it seems that gcc still inlines the result and the output is pretty much
the same. Since this is considered a cleaner approach, might as well
implement it.
[ Impact: code clean up ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The result of the allocation of the ring buffer read page in the
ring buffer bench mark does not check the return to see if a page
was actually allocated. This patch fixes that.
[ Impact: avoid NULL dereference ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The code in __rb_reserve_next checks on page overflow if it is the
original commiter and then resets the page back to the original
setting. Although this is fine, and the code is correct, it is
a bit fragil. Some experimental work I did breaks it easily.
The better and more robust solution is to have all commiters that
overflow the page, simply subtract what they added.
[ Impact: more robust ring buffer account management ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This compiler warning:
CC kernel/trace/trace_output.o
kernel/trace/trace_output.c: In function ‘register_ftrace_event’:
kernel/trace/trace_output.c:544: warning: ‘list’ may be used uninitialized in this function
Is wrong as 'list' is always initialized - but GCC (4.3.2) does not
recognize this relationship properly.
Work around the warning by initializing the variable to NULL.
[ Impact: fix false positive compiler warning ]
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This attempts to clarify names utilized during block I/O remap
operations (partition, volume manager). It correctly matches up the
/from/ information for both device & sector. This takes in the concept
from Kosaki Motohiro and extends it to include better naming for the
"device_from" field.
[ Impact: cleanup ]
Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <49FF4FAE.3000301@hp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A module will add/remove its trace events when it gets loaded/unloaded, so
the ftrace_events list is not "const", and concurrent access needs to be
protected.
This patch thus fixes races between loading/unloding modules and read
'available_events' or read/write 'set_event', etc.
Below shows how to reproduce the race:
# for ((; ;)) { cat /mnt/tracing/available_events; } > /dev/null &
# for ((; ;)) { insmod trace-events-sample.ko; rmmod sample; } &
After a while:
BUG: unable to handle kernel paging request at 0010011c
IP: [<c1080f27>] t_next+0x1b/0x2d
...
Call Trace:
[<c10c90e6>] ? seq_read+0x217/0x30d
[<c10c8ecf>] ? seq_read+0x0/0x30d
[<c10b4c19>] ? vfs_read+0x8f/0x136
[<c10b4fc3>] ? sys_read+0x40/0x65
[<c1002a68>] ? sysenter_do_call+0x12/0x36
[ Impact: fix races when concurrent accessing ftrace_events list ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4A00F709.3080800@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When unloading a module, memory allocated by init_preds() and
trace_define_field() is not freed.
[ Impact: fix memory leak ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4A00F6E0.3040503@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds code that can benchmark the ring buffer as well as
test it. This code can be compiled into the kernel (not recommended)
or as a module.
A separate ring buffer is used to not interfer with other users, like
ftrace. It creates a producer and a consumer (option to disable creation
of the consumer) and will run for 10 seconds, then sleep for 10 seconds
and then repeat.
While running, the producer will write 10 byte loads into the ring
buffer with just putting in the current CPU number. The reader will
continually try to read the buffer. The reader will alternate from reading
the buffer via event by event, or by full pages.
The output is a pr_info, thus it will fill up the syslogs.
Starting ring buffer hammer
End ring buffer hammer
Time: 9000349 (usecs)
Overruns: 12578640
Read: 5358440 (by events)
Entries: 0
Total: 17937080
Missed: 0
Hit: 17937080
Entries per millisec: 1993
501 ns per entry
Sleeping for 10 secs
Starting ring buffer hammer
End ring buffer hammer
Time: 9936350 (usecs)
Overruns: 0
Read: 28146644 (by pages)
Entries: 74
Total: 28146718
Missed: 0
Hit: 28146718
Entries per millisec: 2832
353 ns per entry
Sleeping for 10 secs
Time: is the time the test ran
Overruns: the number of events that were overwritten and not read
Read: the number of events read (either by pages or events)
Entries: the number of entries left in the buffer
(the by pages will only read full pages)
Total: Entries + Read + Overruns
Missed: the number of entries that failed to write
Hit: the number of entries that were written
The above example shows that it takes ~353 nanosecs per entry when
there is a reader, reading by pages (and no overruns)
The event by event reader slowed the producer down to 501 nanosecs.
[ Impact: see how changes to the ring buffer affect stability and performance ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In the hot path of the ring buffer "__rb_reserve_next" there's a big
if statement that does not even return back to the work flow.
code;
if (cross to next page) {
[ lots of code ]
return;
}
more code;
The condition is even the unlikely path, although we do not denote it
with an unlikely because gcc is fine with it. The condition is true when
the write crosses a page boundary, and we need to start at a new page.
Having this if statement makes it hard to read, but calling another
function to do the work is also not appropriate, because we are using a lot
of variables that were set before the if statement, and we do not want to
send them as parameters.
This patch changes it to a goto:
code;
if (cross to next page)
goto next_page;
more code;
return;
next_page:
[ lots of code]
This makes the code easier to understand, and a bit more obvious.
The output from gcc is practically identical. For some reason, gcc decided
to use different registers when I switched it to a goto. But other than that,
the logic is the same.
[ Impact: easier to read code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When adding the EXPORT_SYMBOL to some of the tracing API, I accidently
used EXPORT_SYMBOL instead of EXPORT_SYMBOL_GPL. This patch fixes
that mistake.
[ Impact: export the tracing code only for GPL modules ]
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As a precaution, it is best to disable writing to the ring buffers
when reseting them.
[ Impact: prevent weird things if write happens during reset ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In the swap page ring buffer code that is used by the ftrace splice code,
we scan the page to increment the counter of entries read.
With the number of entries already in the page we simply need to add it.
[ Impact: speed up reading page from ring buffer ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, when the ring buffer writer overflows the buffer and must
write over non consumed data, we increment the overrun counter by
reading the entries on the page we are about to overwrite. This reads
the entries one by one.
This is not very effecient. This patch adds another entry counter
into each buffer page descriptor that keeps track of the number of
entries on the page. Now on overwrite, the overrun counter simply
needs to add the number of entries that is on the page it is about
to overwrite.
[ Impact: speed up of ring buffer in overwrite mode ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The entries counter in cpu buffer is not atomic. It can be updated by
other interrupts or from another CPU (readers).
But making entries into "atomic_t" causes an atomic operation that can
hurt performance. Instead we convert it to a local_t that will increment
a counter with a local CPU atomic operation (if the arch supports it).
Instead of fighting with readers and overwrites that decrement the counter,
I added a "read" counter. Every time a reader reads an entry it is
incremented.
We already have a overrun counter and with that, the entries counter and
the read counter, we can calculate the total number of entries in the
buffer with:
(entries - overrun) - read
As long as the total number of entries in the ring buffer is less than
the word size, this will work. But since the entries counter was previously
a long, this is no different than what we had before.
Thanks to Andrew Morton for pointing out in the first version that
atomic_t does not replace unsigned long. I switched to atomic_long_t
even though it is signed. A negative count is most likely a bug.
[ Impact: keep accurate count of cpu buffer entries ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds stats to the ftrace ring buffers:
# cat /debugfs/tracing/per_cpu/cpu0/stats
entries: 42360
overrun: 30509326
commit overrun: 0
nmi dropped: 0
Where entries are the total number of data entries in the buffer.
overrun is the number of entries not consumed and were overwritten by
the writer.
commit overrun is the number of entries dropped due to nested writers
wrapping the buffer before the initial writer finished the commit.
nmi dropped is the number of entries dropped due to the ring buffer
lock being held when an nmi was going to write to the ring buffer.
Note, this field will be meaningless and will go away when the ring
buffer becomes lockless.
[ Impact: let userspace know what is happening in the ring buffers ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The WARN_ON in the ring buffer when a commit is preempted and the
buffer is filled by preceding writes can happen in normal operations.
The WARN_ON makes it look like a bug, not to mention, because
it does not stop tracing and calls printk which can also recurse, this
is prone to deadlock (the WARN_ON is not in a position to recurse).
This patch removes the WARN_ON and replaces it with a counter that
can be retrieved by a tracer. This counter is called commit_overrun.
While at it, I added a nmi_dropped counter to count any time an NMI entry
is dropped because the NMI could not take the spinlock.
[ Impact: prevent deadlock by printing normal case warning ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I'm adding a module to do a series of tests on the ring buffer as well
as benchmarks. This module needs to have more of the ring buffer API
exported. There's nothing wrong with reading the ring buffer from a
module.
[ Impact: allow modules to read pages from the ring buffer ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Replace the current event parser hack with a better one. Filters are
no longer specified predicate by predicate, but all at once and can
use parens and any of the following operators:
numeric fields:
==, !=, <, <=, >, >=
string fields:
==, !=
predicates can be combined with the logical operators:
&&, ||
examples:
"common_preempt_count > 4" > filter
"((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter
If there was an error, the erroneous string along with an error
message can be seen by looking at the filter e.g.:
((sig >= 10 && sig < 15) || dsig == 17) && comm != bash
^
parse_error: Field not found
Currently the caret for an error always appears at the beginning of
the filter; a real position should be used, but the error message
should be useful even without it.
To clear a filter, '0' can be written to the filter file.
Filters can also be set or cleared for a complete subsystem by writing
the same filter as would be written to an individual event to the
filter file at the root of the subsytem. Note however, that if any
event in the subsystem lacks a field specified in the filter being
set, the set will fail and all filters in the subsytem are
automatically cleared. This change from the previous version was made
because using only the fields that happen to exist for a given event
would most likely result in a meaningless filter.
Because the logical operators are now implemented as predicates, the
maximum number of predicates in a filter was increased from 8 to 16.
[ Impact: add new, extended trace-filter implementation ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905899.6416.121.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The new filter comparison ops need to be able to distinguish between
signed and unsigned field types, so add an is_signed flag/param to the
event field struct/trace_define_fields(). Also define a simple macro,
is_signed_type() to determine the signedness at compile time, used in the
trace macros. If the is_signed_type() macro won't work with a specific
type, a new slightly modified version of TRACE_FIELD() called
TRACE_FIELD_SIGN(), allows the signedness to be set explicitly.
[ Impact: extend trace-filter code for new feature ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905893.6416.120.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Create a new event_filter object, and move the pred-related members
out of the call and subsystem objects and into the filter object - the
details of the filter implementation don't need to be exposed in the
call and subsystem in any case, and it will also help make the new
parser implementation a little cleaner.
[ Impact: refactor trace-filter code to prepare for new features ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <1240905887.6416.119.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The pages allocated for the splice binary buffer did not initialize
the ref count correctly. This caused pages not to be freed and causes
a drastic memory leak.
Thanks to logdev I was able to trace the tracer to find where the leak
was.
[ Impact: stop memory leak when using splice ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The warning output in trace_recursive_lock uses %d for a long when
it should be %ld.
[ Impact: fix compile warning ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Splice works with pages, it is much more effecient to use an entire
page than to copy bits over several pages.
Using logdev to trace the internals of the splice mechanism, I was
able to see that splice can be very aggressive. When tracing is
occurring, and the reader caught up to the writer, and the writer
is on the reader page, the reader will copy what is there into the
splice page. Splice may iterate over several pages and if the
writer is still writing to the page, the reader will keep copying
bits to new pages to pass to userspace.
This patch changes it to only pass data to userspace if the page
is full (the writer has left the page). This has a small side effect
that splice can not read a partial page, and must wait for the
page to fill. This should not be an issue. If tracing has stopped,
then a use of "read" will still read all of the page.
[ Impact: better performance for ring buffer splice code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The splice code allocates a page even when the ring buffer is empty.
It detects the ring buffer being empty when it it fails to copy
anything from the ring buffer into the page.
This patch adds a check to see if there is anything in the ring buffer
before allocating a page.
Thanks to logdev for letting me trace the tracer to find this.
[ Impact: speed up due to removing unnecessary allocation ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The pages allocated for the splice binary buffer did not initialize
the ref count correctly. This caused pages not to be freed and causes
a drastic memory leak.
Thanks to logdev I was able to trace the tracer to find where the leak
was.
[ Impact: stop memory leak when using splice ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_dump is used for printing out the contents of the ftrace ring buffer
to the console on failure. Currently it uses a spinlock to synchronize
the output from multiple failures on different CPUs. This spin lock
currently is a normal spinlock and can cause issues with lockdep and
lock tracing.
This patch converts it to raw since it is for error handling only.
The lock is local to the ftrace_dump and is not used by any other
infrastructure.
[ Impact: prevent ftrace_dump from locking up by internal tracing ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For proper module reference counting, the file_operations that modules use
must have the "owner" field set to the module. Unfortunately, the trace events
use share file_operations. The same file_operations are used by all both
kernel core and all modules.
This patch makes the modules allocate their own file_operations and
copies the functions from the core kernel. This allows those file
operations to be owned by the module.
Care is taken to free this code on module unload.
Thanks to Greg KH for reminding me that file_operations must be owned
by the module to have reference counting take place.
[ Impact: fix modular tracepoints / potential crash ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
With modules being able to add trace events, and the max trace event
counter is 16 bits (65536) we can overflow the counter easily
with a simple while loop adding and removing modules that contain
trace events.
This patch links together the registered trace events and on overflow
searches for available trace event ids. It will still fail if
over 65536 events are registered, but considering that a typical
kernel only has 22000 functions, 65000 events should be sufficient.
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Conflicts:
arch/x86/kernel/ptrace.c
Merge reason: fix the conflict above, and also pick up the CONFIG_BROKEN
dependency change from upstream so that we can remove it
here.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes
an 'u32' to save the actually length for events which data size > 28.
This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA.
[ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <49F13189.3090000@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The events exported by TRACE_EVENT are automated and are guaranteed
to be correct when used.
The internal ftrace structures on the other hand are more manually
exported. These require the ftrace maintainer to make sure they
are up to date.
This patch adds a size check to help flag when a type changes in
an internal ftrace data structure, and the update needs to be reflected
in the export.
If a export is incorrect, then the only harm is that the user space
tools will not know how to correctly read the internal structures of
ftrace.
[ Impact: help prevent inconsistent ftrace format print outs ]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
With the new event tracing registration, we must increase the number
of events that can be registered. Currently the type field is only
one byte, which leaves us only 256 possible events.
Since we do not save the CPU number in the tracer anymore (it is determined
by the per cpu ring buffer that is used) we have an extra byte to use.
This patch increases the size of type from 1 byte (256 events) to
2 bytes (65,536 events).
It also adds a WARN_ON_ONCE if we exceed that limit.
[ Impact: allow more than 255 events ]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
The code had the following outside the lock:
if (next != wakeup_task)
return;
pc = preempt_count();
/* The task we are waiting for is waking up */
data = wakeup_trace->data[wakeup_cpu];
On initialization, wakeup_task is NULL and wakeup_cpu -1. This code
is not under a lock. If wakeup_task is set on another CPU as that
task is waking up, we can see the wakeup_task before wakeup_cpu is
set. If we read wakeup_cpu while it is still -1 then we will have
a bad data pointer.
This patch moves the reading of wakeup_cpu within the protection of
the spinlock used to protect the writing of wakeup_cpu and wakeup_task.
[ Impact: remove possible race causing invalid pointer dereference ]
Reported-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
struct trace_entry->type is unsigned char, while trace event's id is
int type, thus for a event with id >= 256, it's entry->type is cast
to (id % 256), and then we can't see the trace output of this event.
# insmod trace-events-sample.ko
# echo foo_bar > /mnt/tracing/set_event
# cat /debug/tracing/events/trace-events-sample/foo_bar/id
256
# cat /mnt/tracing/trace_pipe
<...>-3548 [001] 215.091142: Unknown type 0
<...>-3548 [001] 216.089207: Unknown type 0
<...>-3548 [001] 217.087271: Unknown type 0
<...>-3548 [001] 218.085332: Unknown type 0
[ Impact: fix output for trace events with id >= 256 ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <49EEDB0E.5070207@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On boot up, to save memory, ftrace allocates the minimum buffer
which is two pages. Ftrace also goes through a series of tests
(when configured) on boot up. These tests can fill up a page within
a single interrupt.
The ring buffer also has a WARN_ON when it detects that the buffer was
completely filled within a single commit (other commits are allowed to
be nested).
Combine the small buffer on start up, with the tests that can fill more
than a single page within an interrupt, this can trigger the WARN_ON.
This patch makes the WARN_ON only happen when the ring buffer consists
of more than two pages.
[ Impact: prevent false WARN_ON in ftrace startup tests ]
Reported-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <20090421094616.GA14561@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Suppose we would like to trace all tasks named '123', but this
will fail:
# echo 'parent_comm == 123' > events/sched/sched_process_fork/filter
bash: echo: write error: Invalid argument
Don't guess the type of the filter pred in filter_parse(), but instead
we check it in __filter_add_pred().
[ Impact: extend allowed filter field string values ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <49ED8DEB.6000700@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If writing subsys->filter returns EINVAL or ENOSPC, the original
filters in subsys/ and subsys/events/ will be removed. This is
definitely wrong.
[ Impact: fix filter setting semantics on error condition ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <49ED8DD2.2070700@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The startup tests for the event tracer also runs with the function
tracer enabled. The "wakeup" version of the trace commit was used
which can grab spinlocks. If a task was preempted by an NMI
that called a function being traced, it could deadlock due to the
function tracer trying to grab the same lock.
Thanks to Frederic Weisbecker for pointing out where the bug was.
Reported-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Althought using the irq level (hardirq_count, softirq_count and in_nmi)
was nice to detect bad recursion right away, but since the counters are
not atomically updated with respect to the interrupts, the function tracer
might trigger the test from an interrupt handler before the hardirq_count
is updated. This will trigger a false warning.
This patch converts the recursive detection to a simple counter.
If the depth is greater than 16 then the recursive detection will trigger.
16 is more than enough for any nested interrupts.
[ Impact: fix false positive trace recursion detection ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring_buffer_event_discard is not tied to ring_buffer_lock_reserve.
It can be called inside or outside the reserve/commit. Even if it
is called inside the reserve/commit the commit part must also be called.
Only ring_buffer_discard_commit can be used as a replacement for
ring_buffer_unlock_commit.
This patch removes the trace_recursive_unlock from ring_buffer_event_discard
since it would be the wrong place to do so.
[Impact: prevent breakage in trace recursive testing ]
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The recursive tests to detect same level recursion in the ring buffers
did not account for the hard/softirq_counts to be shifted. Thus the
numbers could be larger than then mask to be tested.
This patch includes the shift for the calculation of the irq depth.
[ Impact: stop false positives in trace recursion detection ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The late_initcall calls a helper function instead of the proper
init event selftest function.
This update may have been lost due to conflicting merges.
[ Impact: fix compiler warning and call extended event trace self tests ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently we have two configs: EVENT_TRACING and EVENT_TRACER.
All tracers enable EVENT_TRACING. The EVENT_TRACER is only a
convenience to enable the EVENT_TRACING when no other tracers
are enabled.
The names EVENT_TRACER and EVENT_TRACING are too similar and confusing.
This patch renames EVENT_TRACER to ENABLE_EVENT_TRACING to be more
appropriate to what it actually does, as well as add a comment in
the help menu to explain the option's purpose.
[ Impact: rename config option to reduce confusion ]
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
During testing we often use randconfig to test various kernels.
The current configuration set up does not give an easy way to disable
all tracing with a single config. The case where randconfig would
test all tracing disabled is very unlikely.
This patch adds a config option to enable or disable all tracing.
It is hooked into the tracing menu just like other submenus are done.
[ Impact: allow randconfig to easily produce all traces disabled ]
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch makes the branch profiling into a choice selection:
None - no branch profiling
likely/unlikely - only profile likely/unlikely branches
all - profile all branches
The all profiler will also enable the likely/unlikely branches.
This does not change the way the profiler works or the dependencies
between the profilers.
What this patch does, is keep the branch profiling from being selected
by an allyesconfig make. The branch profiler is very intrusive and
it is known to break various architecture builds when selected as an
allyesconfig.
[ Impact: prevent branch profiler from being selected in allyesconfig ]
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In case of tracing recursion detection, we only get the stacktrace.
But the current context may be very useful to debug the issue.
This patch adds the softirq/hardirq/nmi context with the warning
using lockdep context display to have a familiar output.
v2: Use printk_once()
v3: drop {hardirq,softirq}_context which depend on lockdep,
only keep what is part of current->trace_recursion,
sufficient to debug the warning source.
[ Impact: print context necessary to debug recursion ]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
trace_printk can be called from any context, including NMIs.
If this happens, then we must test for for recursion before
grabbing any spinlocks.
This patch prevents trace_printk from being called recursively.
[ Impact: prevent hard lockup in lockdep event tracer ]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing infrastructure allows for recursion. That is, an interrupt
may interrupt the act of tracing an event, and that interrupt may very well
perform its own trace. This is a recursive trace, and is fine to do.
The problem arises when there is a bug, and the utility doing the trace
calls something that recurses back into the tracer. This recursion is not
caused by an external event like an interrupt, but by code that is not
expected to recurse. The result could be a lockup.
This patch adds a bitmask to the task structure that keeps track
of the trace recursion. To find the interrupt depth, the following
algorithm is used:
level = hardirq_count() + softirq_count() + in_nmi;
Here, level will be the depth of interrutps and softirqs, and even handles
the nmi. Then the corresponding bit is set in the recursion bitmask.
If the bit was already set, we know we had a recursion at the same level
and we warn about it and fail the writing to the buffer.
After the data has been committed to the buffer, we clear the bit.
No atomics are needed. The only races are with interrupts and they reset
the bitmask before returning anywy.
[ Impact: detect same irq level trace recursion ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Not all the necessary symbols were exported to allow for tracing
by modules. This patch adds them in.
[ Impact: allow modules to commit data to the ring buffer ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds a filter_mutex to prevent the filter predicates from
being accessed concurrently by various external functions.
It's based on a previous patch by Li Zefan:
"[PATCH 7/7] tracing/filters: make filter preds RCU safe"
v2 changes:
- fixed wrong value returned in a add_subsystem_pred() failure case
noticed by Li Zefan.
[ Impact: fix trace filter corruption/crashes on parallel access ]
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: paulmck@linux.vnet.ibm.com
LKML-Reference: <1239946028.6639.13.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We can find some bugs in the trace events if we stress the writes as well.
The function tracer is a good way to stress the events.
[ Impact: extend scope of event tracer self-tests ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090416161746.604786131@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Export the cached task comms to userspace. This allows user apps to translate
the pids from a trace into their respective task command lines.
[ Impact: let userspace apps reading binary buffer know comm's of pids ]
Signed-off-by: Avadh Patel <avadh4all@gmail.com>
[ added error checking and use of buf pointer to index file_buf ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, every thing needed to read the binary output from the
ring buffers is available, with the exception of the way the ring
buffers handles itself internally.
This patch creates two special files in the debugfs/tracing/events
directory:
# cat /debug/tracing/events/header_page
field: u64 timestamp; offset:0; size:8;
field: local_t commit; offset:8; size:8;
field: char data; offset:16; size:4080;
# cat /debug/tracing/events/header_event
type : 2 bits
len : 3 bits
time_delta : 27 bits
array : 32 bits
padding : type == 0
time_extend : type == 1
data : type == 3
This is to allow a userspace app to see if the ring buffer format changes
or not.
[ Impact: allow userspace apps to know of ringbuffer format changes ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As events start to become popular, and the new way to add tracing
infrastructure into ftrace, it is important to catch any problems
that might happen with a mistake in the TRACE_EVENT macro.
This patch introduces a startup self test on the registered trace
events. Note, it can only do a generic test, any type of testing that
needs more involement is needed to be implemented by the tracepoint
creators.
The test goes down one by one enabling a trace point and running
some random tasks (random in the sense that I just made them up).
Those tasks are creating threads, grabbing mutexes and spinlocks
and using workqueues.
After testing each event individually, it does the same test after
enabling each system of trace points. Like sched, irq, lockdep.
Then finally it enables all tracepoints and performs the tasks again.
The output to the console on bootup will look like this when everything
works:
Running tests on trace events:
Testing event kfree_skb: OK
Testing event kmalloc: OK
Testing event kmem_cache_alloc: OK
Testing event kmalloc_node: OK
Testing event kmem_cache_alloc_node: OK
Testing event kfree: OK
Testing event kmem_cache_free: OK
Testing event irq_handler_exit: OK
Testing event irq_handler_entry: OK
Testing event softirq_entry: OK
Testing event softirq_exit: OK
Testing event lock_acquire: OK
Testing event lock_release: OK
Testing event sched_kthread_stop: OK
Testing event sched_kthread_stop_ret: OK
Testing event sched_wait_task: OK
Testing event sched_wakeup: OK
Testing event sched_wakeup_new: OK
Testing event sched_switch: OK
Testing event sched_migrate_task: OK
Testing event sched_process_free: OK
Testing event sched_process_exit: OK
Testing event sched_process_wait: OK
Testing event sched_process_fork: OK
Testing event sched_signal_send: OK
Running tests on trace event systems:
Testing event system skb: OK
Testing event system kmem: OK
Testing event system irq: OK
Testing event system lockdep: OK
Testing event system sched: OK
Running tests on all trace events:
Testing all events: OK
[ folded in:
tracing: add #include <linux/delay.h> to fix build failure in test_work()
This build failure occured on a few rare configs:
kernel/trace/trace_events.c: In function ‘test_work’:
kernel/trace/trace_events.c:975: error: implicit declaration of function ‘udelay’
kernel/trace/trace_events.c:980: error: implicit declaration of function ‘msleep’
delay.h is included in way too many other headers, hiding cases
where new usage is added without header inclusion.
[ Impact: build fix ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
]
[ Impact: add event tracer self-tests ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The hooks in the module code for the function tracer must be called
before any of that module code runs. The function tracer hooks
modify the module (replacing calls to mcount to nops). If the code
is executed while the change occurs, then the CPU can take a GPF.
To handle the above with a bit of paranoia, I originally implemented
the hooks as calls directly from the module code.
After examining the notifier calls, it looks as though the start up
notify is called before any of the module's code is executed. This makes
the use of the notify safe with ftrace.
Only the startup notify is required to be "safe". The shutdown simply
removes the entries from the ftrace function list, and does not modify
any code.
This change has another benefit. It removes a issue with a reverse dependency
in the mutexes of ftrace_lock and module_mutex.
[ Impact: fix lock dependency bug, cleanup ]
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When current tracer is set to blk tracer, TRACE_ITER_CONTEXT_INFO is
unset, but actually context-info is printed:
pdflush-431 [000] 821.181576: 8,0 P N [pdflush]
And then if we enable TRACE_ITER_CONTEXT_INFO:
# echo context-info > trace_options
We'll see context-info printed twice. What's worse, when we use blk
tracer and trace events at the same time, we'll see no context-info
for trace events at all:
jbd2_commit_logging: dev dm-0:8 transaction 333227
jbd2_end_commit: dev dm-0:8 transaction 333227 head 332814
rm-25433 [001] 9578.307485: 8,18 m N cfq25433 slice expired t=0
rm-25433 [001] 9578.307486: 8,18 m N cfq25433 put_queue
This patch adds blk_tracer->set_flags(), and context-info flag is unset
only when we set the output to classic mode.
Note after this patch, one should unset context-info explicitly if he
wants to get binary output that can be parsed by blkparse:
# echo nocontext-info > trace_options
# echo bin > trace_options
# echo blk > current_tracer
# cat trace_pipe | blkparse -i -
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <49E54E60.50408@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The previous patch adds support to trace a single partition for
relay+ioctl blktrace, and this patch is for ftrace plugin blktrace:
# echo 1 > /sys/block/sda/sda7/enable
# cat start_lba
102398373
# cat end_lba
102703545
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Shawn Du <duyuyang@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
LKML-Reference: <49E42646.4060608@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Though one can specify '-d /dev/sda1' when using blktrace, it still
traces the whole sda.
To support per-partition tracing, when we start tracing, we initialize
bt->start_lba and bt->end_lba to the start and end sector of that
partition.
Note some actions are per device, thus we don't filter 0-sector events.
The original patch and discussion can be found here:
http://marc.info/?l=linux-btrace&m=122949374214540&w=2
Signed-off-by: Shawn Du <duyuyang@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
LKML-Reference: <49E42620.4050701@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up
Create a sub directory in include/trace called events to keep the
trace point headers in their own separate directory. Only headers that
declare trace points should be defined in this directory.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Impact: compile fix
The addition of TRACE_EVENT for modules breaks the build for when
modules are disabled. This code fixes that.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Impact: allow modules to add TRACE_EVENTS on load
This patch adds the final hooks to allow modules to use the TRACE_EVENT
macro. A notifier and a data structure are used to link the TRACE_EVENTs
defined in the module to connect them with the ftrace event tracing system.
It also adds the necessary automated clean ups to the trace events when a
module is removed.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Impact: let modules add trace events
The trace event code requires some functions to be exported to allow
modules to use TRACE_EVENT. This patch adds EXPORT_SYMBOL_GPL to the
necessary functions.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Impact: makes it possible to define events in modules
The events are created by reading down the section that they are linked
in by the macros. But this is not scalable to modules. This patch converts
the manipulations to use a global link list, and on boot up it adds
the items in the section to the list.
This change will allow modules to add their tracing events to the list as
well.
Note, this change alone does not permit modules to use the TRACE_EVENT macros,
but the change is needed for them to eventually do so.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch moves the ftrace creation into include/trace/ftrace.h and
simplifies the work of developers in adding new tracepoints.
Just the act of creating the trace points in include/trace and including
define_trace.h will create the events in the debugfs/tracing/events
directory.
This patch removes the need of include/trace/trace_events.h
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In preparation to allowing trace events to happen in modules, we need
to move some of the local declarations in the kernel/trace directory
into include/linux.
This patch simply moves the declarations and performs no context changes.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In the process to make TRACE_EVENT macro work for modules, the trace_seq
operations must be available for core kernel code.
These operations are quite useful and can be used for other implementations.
The main idea is that we create a trace_seq handle that acts very much
like the seq_file handle.
struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL);
trace_seq_init(s);
trace_seq_printf(s, "some data %d\n", variable);
printk("%s", s->buffer);
The main use is to allow a top level function call several other functions
that may store printf like data into the buffer. Then at the end, the top
level function can process all the data with any method it would like to.
It could be passed to userspace, output via printk or even use seq_file:
trace_seq_to_user(s, ubuf, cnt);
seq_puts(m, s->buffer);
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Jeremy Fitzhardinge reported this build failure:
LD .tmp_vmlinux1
arch/x86/kernel/built-in.o: In function `ds_take_timestamp':
git/linux/arch/x86/kernel/ds.c:1380: undefined reference to `trace_clock_global'
git/linux/arch/x86/kernel/ds.c:1380: undefined reference to `trace_clock_global'
Which is due to !CONFIG_TRACING && CONFIG_X86_DS=y.
Expose the trace clock code to CONFIG_X86_DS as well.
[ Unfortunately librarizing doesnt work well - ancient architectures
with no raw_local_irq_save() primitive break the build. ]
Reported-by: Jeremy Fitzhardinge <jeremy@goop.org>
LKML-Reference: <49E4413F.7070700@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clean up
Neil Horman (et. al.) criticized the way the trace events were broken up
into two files. The reason for that was that ftrace needed to separate out
the declarations from where the #include <linux/tracepoint.h> was used.
It then dawned on me that the tracepoint.h header only needs to define the
TRACE_EVENT macro if it is not already defined.
The solution is simply to test if TRACE_EVENT is defined, and if it is not
then the linux/tracepoint.h header can define it. This change consolidates
all the <traces>.h and <traces>_event_types.h into the <traces>.h file.
Reported-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Theodore Tso <tytso@mit.edu>
Reported-by: Jiaying Zhang <jiayingz@google.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch allows event filters to be safely removed or switched
on-the-fly while avoiding the use of rcu or the suspension of tracing of
previous versions.
It does it by adding a new filter_pred_none() predicate function which
does nothing and by never deallocating either the predicates or any of
the filter_pred members used in matching; the predicate lists are
allocated and initialized during ftrace_event_calls initialization.
Whenever a filter is removed or replaced, the filter_pred_* functions
currently in use by the affected ftrace_event_call are immediately
switched over to to the filter_pred_none() function, while the rest of
the filter_pred members are left intact, allowing any currently
executing filter_pred_* functions to finish up, using the values they're
currently using.
In the case of filter replacement, the new predicate values are copied
into the old predicates after the above step, and the filter_pred_none()
functions are replaced by the filter_pred_* functions for the new
filter. In this case, it is possible though very unlikely that a
previous filter_pred_* is still running even after the
filter_pred_none() switch and the switch to the new filter_pred_*. In
that case, however, because nothing has been deallocated in the
filter_pred, the worst that can happen is that the old filter_pred_*
function sees the new values and as a result produces either a false
positive or a false negative, depending on the values it finds.
So one downside to this method is that rarely, it can produce a bad
match during the filter switch, but it should be possible to live with
that, IMHO.
The other downside is that at least in this patch the predicate lists
are always pre-allocated, taking up memory from the start. They could
probably be allocated on first-use, and de-allocated when tracing is
completely stopped - if this patch makes sense, I could create another
one to do that later on.
Oh, and it also places a restriction on the size of __arrays in events,
currently set to 128, since they can't be larger than the now embedded
str_val arrays in the filter_pred struct.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: paulmck@linux.vnet.ibm.com
LKML-Reference: <1239610670.6660.49.camel@tropicana>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
