The i2c init/fini functions just register the i2c adapter.
There is no need to call them during hw init/fini. They only
need to be called once per driver init/fini. The previous
behavior broke runtime pm because we unregistered the i2c
adapter during suspend.
Tested-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Display goes blank after driver installation.
Aux tuning parameters must be used for 2.x only.
Wrong dc_golden_table offset was used.
[How]
Implement a new enc3_hw_init function without VBIOS constants usage to
be called for 3.x
Calculate dc_golden_table offset using sum of
base dce_info offset and golden table offset
Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During SetPathMode and UpdatePlanes, the plane state can be null. We default
to linear swizzle mode when plane state is null. This resulted in bandwidth
validation failing when trying to set 8K60 mode (which previously passed validation
during rebuild timing list).
[How]
Change the default swizzle mode from linear to 4kb_s and update pitch accordingly.
Signed-off-by: George Shen <george.shen@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How]
Use dc_is_hdmi_signal to determine signal type.
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Sink OUI supported cap is not set so driver skips programming it.
[How]
Revert the change the skips OUI programming if the cap is not set
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
use correct logger context
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. For Navi12, CHIP_SIENNA_CICHLID, skip tmr load operation;
2. Check pointer before release firmware.
v2: use CHIP_SIENNA_CICHLID instead
v3: remove local "bool ret"; fix grammer issue
v4: use my name instead of "root"
v5: fix grammer issue and indent issue
Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Assigning false to block->status.hw overwrites PSP's previous
hardware status, which causes the PSP to Resume operation after
hardware init.
Remove this assignment and let the PSP execute Resume operation
when it is told to.
v2: Remove the braces.
v3: Modify the description.
Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update GC golden setting for navy_flounder.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's in accordance with pmfw 65.5.0 for navy_flounder.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It doesn't expose PPTable descriptor on APU platform. So max/min
temperature values cannot be got from APU platform.
v2: Stoney needs to skip crit temperature as well.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Test expects that we also read HPD_IRQ_VECTOR when checking for
symbol loss as well lane status.
[How]
Read bytes 0x200-0x205 instead of just 0x202-0x205
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Feature requires synchronization of dig, pipe, and cursor locking
between driver and fw.
[How]
Set flag to force psr to use hw lock mgr.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
ramp_up_dispclk_with_dpp is to change dispclk, dppclk and dprefclk
according to bandwidth requirement. call stack: rv1_update_clocks -->
update_clocks --> dcn10_prepare_bandwidth / dcn10_optimize_bandwidth
--> prepare_bandwidth / optimize_bandwidth. before change dcn hw,
prepare_bandwidth will be called first to allow enough clock,
watermark for change, after end of dcn hw change, optimize_bandwidth
is executed to lower clock to save power for new dcn hw settings.
below is sequence of commit_planes_for_stream:
step 1: prepare_bandwidth - raise clock to have enough bandwidth
step 2: lock_doublebuffer_enable
step 3: pipe_control_lock(true) - make dchubp register change will
not take effect right way
step 4: apply_ctx_for_surface - program dchubp
step 5: pipe_control_lock(false) - dchubp register change take effect
step 6: optimize_bandwidth --> dc_post_update_surfaces_to_stream
for full_date, optimize clock to save power
at end of step 1, dcn clocks (dprefclk, dispclk, dppclk) may be
changed for new dchubp configuration. but real dcn hub dchubps are
still running with old configuration until end of step 5. this need
clocks settings at step 1 should not less than that before step 1.
this is checked by two conditions: 1. if (should_set_clock(safe_to_lower
, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) ||
new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz)
2. request_dpp_div = new_clocks->dispclk_khz > new_clocks->dppclk_khz
the second condition is based on new dchubp configuration. dppclk
for new dchubp may be different from dppclk before step 1.
for example, before step 1, dchubps are as below:
pipe 0: recout=(0,40,1920,980) viewport=(0,0,1920,979)
pipe 1: recout=(0,0,1920,1080) viewport=(0,0,1920,1080)
for dppclk for pipe0 need dppclk = dispclk
new dchubp pipe split configuration:
pipe 0: recout=(0,0,960,1080) viewport=(0,0,960,1080)
pipe 1: recout=(960,0,960,1080) viewport=(960,0,960,1080)
dppclk only needs dppclk = dispclk /2.
dispclk, dppclk are not lock by otg master lock. they take effect
after step 1. during this transition, dispclk are the same, but
dppclk is changed to half of previous clock for old dchubp
configuration between step 1 and step 6. This may cause p-state
warning intermittently.
[How]
for new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz, we
need make sure dppclk are not changed to less between step 1 and 6.
for new_clocks->dispclk_khz > clk_mgr_base->clks.dispclk_khz,
new display clock is raised, but we do not know ratio of
new_clocks->dispclk_khz and clk_mgr_base->clks.dispclk_khz,
new_clocks->dispclk_khz /2 does not guarantee equal or higher than
old dppclk. we could ignore power saving different between
dppclk = displck and dppclk = dispclk / 2 between step 1 and step 6.
as long as safe_to_lower = false, set dpclk = dispclk to simplify
condition check.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Each asic can optimize best based on its capabilities
[How]
Optimizing timing for a new pixel clock
Signed-off-by: Reza Amini <Reza.Amini@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Programming DCN is explicitly forbidden during idle optimzations allowed
state. Existing implemenation relies on OS/DM, which is not robust. Instead
DC should sequence this.
Note that DC will not re-enter idle optimized state on its own, it is only
responsible for catching out of sequence calls. It is still DM
responsibility to sequence appropriate for optimized power, but this change
removes the requirement for DM to cover the .1% case.
[How]
- elevate updates during idle optimized state to full updates
- disable idle power optimizations prior to programming
Signed-off-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Setting abm level does not correctly update CRTC state. As a result
no surface update is added to dc stream state and triggers warning.
[How]
Correctly update CRTC state when setting abm level property.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use DCN21 functions instead of DCE110
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently navy_flounder is using sienna_cichlid_dmcub.bin.
[How]
Create a seperate define so navy_flounder will use its own firmware.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some monitors could suffer symbol unlock but cannot send HPD IRQ to
notic source device to handle link loss. This makes monitor stuck in
abnormal status and causes black screen.
[How]
According to the suggestion from scalar vendor, to check lane status
again after link training done. That can improve the comaptibility
from current production monitors.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In dcn3_update_clocks there are situations where dppclk is not
lowered (i.e. stays the same), but DTO still needs to be increased
before we program pipe frontend (i.e. in prepare_bandwidth). If we
don't program the new DTO value before we program the pipe,
we will underflow as soon as the pipe lock is released until the
next call to dcn3_update_clocks where the DTO is updated.
[How]
Remove dppclk check before programming new DTO value.
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Fix naming and return bits rather than bytes per pixel for
naming consistency. Because registers return Bytes per pixel,
but DSC Config structure is expecting bits per pixel as input.
So when returning the value convert from bytes into bits.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Struct dcn_dsc_state is used for reading current state
and parameters of DSC on a pipe, the target rate parameter
uses bytes per pixel even though its reading BITS_PER_PIXEL
register.
[How]
Changing it to Bits Per Pixel for consistency.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This change replaces older looping code in favor of these functions.
[How]
There are built in functions for extracting global sync params
during mode validation now.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. allow asic to handle sensor type by itself.
2. if not, use smu common sensor to handle it.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These tables have _COUNT number of elements so the comparisons should be
>= instead of > to prevent reading one element beyond the end of the
array.
Fixes: 8264ee69f0 ("drm/amd/powerplay: drop unused code")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update sienna_cichlid driver if header and related files.
Support new smu metrics for pre & postDS frequency.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Take back patch:drop unnecessary message support check
Because the gpu reset fail problem on renoir can be fixed by:
drm/amd/powerplay: skip invalid msg when smu set mp1 state
It needs to remove SWSMU_CODE_LAYER_L1 in smu_cmn.h to guard a clear
code layer.
Signed-off-by: changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
jpeg ip block is already selected based on ASIC type during set_ip_blocks.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set valid_in_vf to false for the message not support in vf mode on
sienna cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some asic may not support for some message of set mp1 state.
If the return value of smu_send_smc_msg is -EINVAL, that means it failed
to send msg to smc as it can not map an valid message for the ASIC. And
with that case, smu_set_mp1_state should be skipped as those ASIC was in
fact do not support for that.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not necessary to retrieve the power features status when the
asic is booted up the first time. This patch can have the features
enablement status still checked in suspend/resume case and removed
from the first boot up sequence.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The below 3 messages are not supported on Renoir
SMU_MSG_PrepareMp1ForShutdown
SMU_MSG_PrepareMp1ForUnload
SMU_MSG_PrepareMp1ForReset
It needs to revert patch:
drm/amd/powerplay: drop unnecessary message support check
to avoid set mp1 state fail during gpu reset on renoir.
Signed-off-by: changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will tell users if the faulty page has been written to
external eeprom device in dmesg log.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a DRM_ERROR error message. Fix it.
This got lost in a merge, restore the fix.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4afaa61db9)
[Why]
This was added in the past to solve the issue of not knowing when
to stall for medium and full updates in DM.
Since DC is ultimately decides what requires bandwidth changes we
wanted to make use of it directly to determine this.
The problem is that we can't actually pass any of the stream or surface
updates into DC global validation, so we don't actually check if the new
configuration is valid - we just validate the old existing config
instead and stall for outstanding commits to finish.
There's also the problem of grabbing the DRM private object for
pageflips which can lead to page faults in the case where commits
execute out of order and free a DRM private object state that was
still required for commit tail.
[How]
Now that we reset the plane in DM with the same conditions DC checks
we can have planes go through DC validation and we know when we need
to check and stall based on whether the stream or planes changed.
We mark lock_and_validation_needed whenever we've done this, so just
go back to using that instead of dm_determine_update_type_for_commit.
Since we'll skip resetting the plane for a pageflip we will no longer
grab the DRM private object for pageflips as well, avoiding the
page fault issued caused by pageflipping under load with commits
executing out of order.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MEDIUM or FULL updates can require global validation or affect
bandwidth. By treating these all simply as surface updates we aren't
actually passing this through DC global validation.
[How]
There's currently no way to pass surface updates through DC global
validation, nor do I think it's a good idea to change the interface
to accept these.
DC global validation itself is currently stateless, and we can move
our update type checking to be stateless as well by duplicating DC
surface checks in DM based on DRM properties.
We wanted to rely on DC automatically determining this since DC knows
best, but DM is ultimately what fills in everything into DC plane
state so it does need to know as well.
There are basically only three paths that we exercise in DM today:
1) Cursor (async update)
2) Pageflip (fast update)
3) Full pipe programming (medium/full updates)
Which means that anything that's more than a pageflip really needs to
go down path #3.
So this change duplicates all the surface update checks based on DRM
state instead inside of should_reset_plane().
Next step is dropping dm_determine_update_type_for_commit and we no
longer require the old DC state at all for global validation.
Optimization can come later so we don't reset DC planes at all for
MEDIUM udpates and avoid validation, but we might require some extra
checks in DM to achieve this.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
So we're not racing with userspace or deadlocking DM.
[How]
These flags are now stored on dm_plane_state itself and acquried and
validated during commit_check, so just use those instead.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We're racing with userspace as the flags could potentially change
from when we acquired and validated them in commit_check.
[How]
We unfortunately can't drop this function in its entirety from
prepare_planes since we don't know the afb->address at commit_check
time yet.
So instead of querying new tiling_flags and tmz_surface use the ones
from the plane_state directly.
While we're at it, also update the force_disable_dcc option based
on the state from atomic check.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enabling or disable DCC or switching between tiled and linear formats
can require bandwidth updates.
They're currently skipping all DC validation by being treated as purely
surface updates.
[How]
Treat tiling_flag changes (which encode DCC state) as a condition for
resetting the plane.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Store these in advance so we can reuse them later in commit_tail without
having to reserve the fbo again.
These will also be used for checking for tiling changes when deciding
to reset the plane or not.
[How]
This change should mostly be a refactor. Only commit check is affected
for now and I'll drop the get_fb_info calls in prepare_planes and
commit_tail after.
This runs a prepass loop once we think that all planes have been added
to the context and replaces the get_fb_info calls with accessing the
dm_plane_state instead.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows UMD to know if TMZ is supported and enabled.
This commit also bumps KMS_DRIVER_MINOR because if we don't
UMD can't tell if "ids_flags & AMDGPU_IDS_FLAGS_TMZ == 0" means
"tmz is not enabled" or "tmz may be enabled but the kernel doesn't
report it".
v2: use amdgpu_is_tmz() and reworded commit message.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As for the gpu metric export, metrics cache makes no sense. It's up to
user to decide how often the metrics should be retrieved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable gpu_metrics support on legacy powerplay routines.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add Renoir gpu metrics export interface.
V2: use memcpy to make code more compact
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Although it does not bring any problem for now, the coming gpu
metrics interface needs to handle them differently based on the
asic type.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will be shared around all SMU V11 asics.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A new interface for UMD to retrieve gpu metrics data.
V2: rich the documentation
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thus we can provide an interface for UMD to retrieve gpu metrics data.
V2: better naming and comments
V3: two structures created for dGPU and APU separately
V4: add driver attached timestamp
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a dev_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Arcturus, the softmin/max settings from driver are permitted on the
latest(54.26 later) SMU firmware. Thus enabling them in driver.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If multiple process share system memory through /dev/shm, KFD allocate
memory should not fail if it reaches the system memory limit because
one copy of physical system memory are shared by multiple process.
Add module parameter no_system_mem_limit to provide user option to
disable system memory limit check at runtime using sysfs or during
driver module init using kernel boot argument. By default the system
memory limit is on.
Print out debug message to warn user if KFD allocate memory failed
because system memory reaches limit.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On an error exit path, a negative error code should be returned
instead of a positive return value.
Fixes: 9e869063b0 ("drm/amd/display: Move iteration out of dm_update_planes")
Cc: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
static priority level knowledge from non-scheduler code.
The three APIs for non-scheduler code to set SCHED_FIFO are:
- sched_set_fifo()
- sched_set_fifo_low()
- sched_set_normal()
These are two FIFO priority levels: default (high), and a 'low' priority level,
plus sched_set_normal() to set the policy back to non-SCHED_FIFO.
Since the changes affect a lot of non-scheduler code, we kept this in a separate
tree.
When merging to the latest upstream tree there's a conflict in drivers/spi/spi.c,
which can be resolved via:
sched_set_fifo(ctlr->kworker_task);
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/7JH
-----END PGP SIGNATURE-----
Merge tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull sched/fifo updates from Ingo Molnar:
"This adds the sched_set_fifo*() encapsulation APIs to remove static
priority level knowledge from non-scheduler code.
The three APIs for non-scheduler code to set SCHED_FIFO are:
- sched_set_fifo()
- sched_set_fifo_low()
- sched_set_normal()
These are two FIFO priority levels: default (high), and a 'low'
priority level, plus sched_set_normal() to set the policy back to
non-SCHED_FIFO.
Since the changes affect a lot of non-scheduler code, we kept this in
a separate tree"
* tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
sched,tracing: Convert to sched_set_fifo()
sched: Remove sched_set_*() return value
sched: Remove sched_setscheduler*() EXPORTs
sched,psi: Convert to sched_set_fifo_low()
sched,rcutorture: Convert to sched_set_fifo_low()
sched,rcuperf: Convert to sched_set_fifo_low()
sched,locktorture: Convert to sched_set_fifo()
sched,irq: Convert to sched_set_fifo()
sched,watchdog: Convert to sched_set_fifo()
sched,serial: Convert to sched_set_fifo()
sched,powerclamp: Convert to sched_set_fifo()
sched,ion: Convert to sched_set_normal()
sched,powercap: Convert to sched_set_fifo*()
sched,spi: Convert to sched_set_fifo*()
sched,mmc: Convert to sched_set_fifo*()
sched,ivtv: Convert to sched_set_fifo*()
sched,drm/scheduler: Convert to sched_set_fifo*()
sched,msm: Convert to sched_set_fifo*()
sched,psci: Convert to sched_set_fifo*()
sched,drbd: Convert to sched_set_fifo*()
...
This name better reflects what the object does. I didn't rename
all the pointers it seemed too messy.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-60-airlied@gmail.com
under driver control, this flag isn't needed anymore,
remove the API that used to access it, and consoldiate
with the used api.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-56-airlied@gmail.com
The driver now controls these, the core just controls the system
memory one.
v2: init sysman explicitly and assign it as a driver manager
to simplify the lookup sequence.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-55-airlied@gmail.com
core:
- add user def flag to cmd line modes
- dma_fence_wait added might_sleep
- dma-fence lockdep annotations
- indefinite fences are bad documentation
- gem CMA functions used in more drivers
- struct mutex removal
- more drm_ debug macro usage
- set/drop master api fixes
- fix for drm/mm hole size comparison
- drm/mm remove invalid entry optimization
- optimise drm/mm hole handling
- VRR debugfs added
- uncompressed AFBC modifier support
- multiple display id blocks in EDID
- multiple driver sg handling fixes
- __drm_atomic_helper_crtc_reset in all drivers
- managed vram helpers
ttm:
- ttm_mem_reg handling cleanup
- remove bo offset field
- drop CMA memtype flag
- drop mappable flag
xilinx:
- New Xilinx ZynqMP DisplayPort Subsystem driver
nouveau:
- add CRC support
- start using NVIDIA published class header files
- convert all push buffer emission to new macros
- Proper push buffer space management for EVO/NVD channels.
- firmware loading fixes
- 2MiB system memory pages support on Pascal and newer
vkms:
- larget cursor support
i915:
- Rocketlake platform enablement
- Early DG1 enablement
- Numerous GEM refactorings
- DP MST fixes
- FBC, PSR, Cursor, Color, Gamma fixes
- TGL, RKL, EHL workaround updates
- TGL 8K display support fixes
- SDVO/HDMI/DVI fixes
amdgpu:
- Initial support for Sienna Cichlid GPU
- Initial support for Navy Flounder GPU
- SI UVD/VCE support
- expose rotation property
- Add support for unique id on Arcturus
- Enable runtime PM on vega10 boards that support BACO
- Skip BAR resizing if the bios already did id
- Major swSMU code cleanup
- Fixes for DCN bandwidth calculations
amdkfd:
- Track SDMA usage per process
- SMI events interface
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
msm:
- headers regenerated causing churn
- a650/a640 display and GPU enablement
- dpu dither support for 6bpc panels
- dpu cursor fix
- dsi/mdp5 enablement for sdm630/sdm636/sdm66
tegra:
- video capture prep support
- reflection support
mediatek:
- convert mtk_dsi to bridge API
meson:
- FBC support
sun4i:
- iommu support
rockchip:
- register locking fix
- per-pixel alpha support PX30 VOP
-
mgag200:
- ported to simple and shmem helpers
- device init cleanups
- use managed pci functions
- dropped hw cursor support
ast:
- use managed pci functions
- use managed VRAM helpers
- rework cursor support
malidp:
- dev_groups support
hibmc:
- refactor hibmc_drv_vdac:
vc4:
- create TXP CRTC
imx:
- error path fixes and cleanups
etnaviv:
- clock handling and error handling cleanups
- use pin_user_pages
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJfK1atAAoJEAx081l5xIa+vDkQAJvl/mjbEA7fDy8Ysa0cgPLI
8nI4Bo/MaxkyRfUcP8+f/n3QQrRME37C0xa/Mn6SG1oFAdlovPwDqmDr5kjhkrMI
geo8oJb2Q+AsrJr+ejpuF+iq0FxWi64bLbwJFJ2nBet+lHTMzoPceWeq3gG1Vvfl
h6PV4B/9TjrnbhcKLIQSEmJ0kZp9uMkDBF/iynVn4+AKAkG1rQNjigdTH48IFPoz
28KuqG0B4NWu648zYXhjsN0kD3Dxjv3YOH+FsoWQpQa9icCTySYbySsQ7l0/XvA3
4BPtP3rWMhU46FHTBkWF72WQR4F0B4wm5DJJKMeG4vb1mXakOqAKcAq7JAbka+wL
PBIiU+AcAKRSiwHmYDuDWtDoSpvYncuo0p3IvNP5hhih+7hqCnLIULDWS+V8AUzW
39usS/DXsVKk/HGYIYC89cRwsqWYD4c7edzOBdPQxW4LNYCD2gXezLJ5TeeR2lih
y9JIVnPiluWleOovs4W3BoZNRuLc1rHBO6COToXjlme/48Z+sRHBAoge6UZurqRN
jr+e60cS7n/DOeJQuNf4UHZnK48Pc24+3kVfMHlX+OKn8VuKPGr+USkeHV/NYL/B
USiKCAxkkZM0dxerSb1/Ra9kGnchf0QBpA6Fsem8kV61Z4GVc+K6xJWg7KXB6n/3
7ZyalUKLwlOCz9sYsCCe
=Yvtd
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"New xilinx displayport driver, AMD support for two new GPUs (more
header files), i915 initial support for RocketLake and some work on
their DG1 (discrete chip).
The core also grew some lockdep annotations to try and constrain what
drivers do with dma-fences, and added some documentation on why the
idea of indefinite fences doesn't work.
The long list is below.
I do have some fixes trees outstanding, but I'll follow up with those
later.
core:
- add user def flag to cmd line modes
- dma_fence_wait added might_sleep
- dma-fence lockdep annotations
- indefinite fences are bad documentation
- gem CMA functions used in more drivers
- struct mutex removal
- more drm_ debug macro usage
- set/drop master api fixes
- fix for drm/mm hole size comparison
- drm/mm remove invalid entry optimization
- optimise drm/mm hole handling
- VRR debugfs added
- uncompressed AFBC modifier support
- multiple display id blocks in EDID
- multiple driver sg handling fixes
- __drm_atomic_helper_crtc_reset in all drivers
- managed vram helpers
ttm:
- ttm_mem_reg handling cleanup
- remove bo offset field
- drop CMA memtype flag
- drop mappable flag
xilinx:
- New Xilinx ZynqMP DisplayPort Subsystem driver
nouveau:
- add CRC support
- start using NVIDIA published class header files
- convert all push buffer emission to new macros
- Proper push buffer space management for EVO/NVD channels.
- firmware loading fixes
- 2MiB system memory pages support on Pascal and newer
vkms:
- larger cursor support
i915:
- Rocketlake platform enablement
- Early DG1 enablement
- Numerous GEM refactorings
- DP MST fixes
- FBC, PSR, Cursor, Color, Gamma fixes
- TGL, RKL, EHL workaround updates
- TGL 8K display support fixes
- SDVO/HDMI/DVI fixes
amdgpu:
- Initial support for Sienna Cichlid GPU
- Initial support for Navy Flounder GPU
- SI UVD/VCE support
- expose rotation property
- Add support for unique id on Arcturus
- Enable runtime PM on vega10 boards that support BACO
- Skip BAR resizing if the bios already did id
- Major swSMU code cleanup
- Fixes for DCN bandwidth calculations
amdkfd:
- Track SDMA usage per process
- SMI events interface
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
msm:
- headers regenerated causing churn
- a650/a640 display and GPU enablement
- dpu dither support for 6bpc panels
- dpu cursor fix
- dsi/mdp5 enablement for sdm630/sdm636/sdm66
tegra:
- video capture prep support
- reflection support
mediatek:
- convert mtk_dsi to bridge API
meson:
- FBC support
sun4i:
- iommu support
rockchip:
- register locking fix
- per-pixel alpha support PX30 VOP
mgag200:
- ported to simple and shmem helpers
- device init cleanups
- use managed pci functions
- dropped hw cursor support
ast:
- use managed pci functions
- use managed VRAM helpers
- rework cursor support
malidp:
- dev_groups support
hibmc:
- refactor hibmc_drv_vdac:
vc4:
- create TXP CRTC
imx:
- error path fixes and cleanups
etnaviv:
- clock handling and error handling cleanups
- use pin_user_pages"
* tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits)
drm/msm: use kthread_create_worker instead of kthread_run
drm/msm/mdp5: Add MDP5 configuration for SDM636/660
drm/msm/dsi: Add DSI configuration for SDM660
drm/msm/mdp5: Add MDP5 configuration for SDM630
drm/msm/dsi: Add phy configuration for SDM630/636/660
drm/msm/a6xx: add A640/A650 hwcg
drm/msm/a6xx: hwcg tables in gpulist
drm/msm/dpu: add SM8250 to hw catalog
drm/msm/dpu: add SM8150 to hw catalog
drm/msm/dpu: intf timing path for displayport
drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3
drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845
drm/msm/dpu: move some sspp caps to dpu_caps
drm/msm/dpu: update UBWC config for sm8150 and sm8250
drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250
drm/msm/a6xx: set ubwc config for A640 and A650
drm/msm/adreno: un-open-code some packets
drm/msm: sync generated headers
drm/msm/a6xx: add build_bw_table for A640/A650
drm/msm/a6xx: fix crashstate capture for A650
...
Drivers should all be cleaning up their memory managers
themselves now, so let the core just clean the system one up.
Remove the legacy cleaning interface.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-36-airlied@gmail.com
The disable path is just temporary for now, it will be dropped once has_type
is gone in a later patch.
v2: add docs.
rename to ttm_mem_type_manager namespace
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-26-airlied@gmail.com
This will allow the driver to control the ordering here better.
Eventually the old path will be removed.
v2: add docs for new APIs.
rename new path to ttm_mem_type_manager_init/set_used(for now)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-14-airlied@gmail.com
This code was assuming there was a drm_mm here, don't do
that call the correct API.
v2: use the new exported interface.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-13-airlied@gmail.com
As suggested on review, just export the memory type debug for
drivers to use, while also making the debug callback optional
(don't need to test for system as it won't init it).
rename it to be more consistent with object name for now.
(we may rename all the objects later.)
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-9-airlied@gmail.com
This series adds reporting of the page table order from hmm_range_fault()
and some optimization of migrate_vma():
- Report the size of the page table mapping out of hmm_range_fault(). This
makes it easier to establish a large/huge/etc mapping in the device's
page table.
- Allow devices to ignore the invalidations during migration in cases
where the migration is not going to change pages. For instance migrating
pages to a device does not require the device to invalidate pages
already in the device.
- Update nouveau and hmm_tests to use the above
-----BEGIN PGP SIGNATURE-----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=omAU
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"Ralph has been working on nouveau's use of hmm_range_fault() and
migrate_vma() which resulted in this small series. It adds reporting
of the page table order from hmm_range_fault() and some optimization
of migrate_vma():
- Report the size of the page table mapping out of hmm_range_fault().
This makes it easier to establish a large/huge/etc mapping in the
device's page table.
- Allow devices to ignore the invalidations during migration in cases
where the migration is not going to change pages.
For instance migrating pages to a device does not require the
device to invalidate pages already in the device.
- Update nouveau and hmm_tests to use the above"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
mm/hmm/test: use the new migration invalidation
nouveau/svm: use the new migration invalidation
mm/notifier: add migration invalidation type
mm/migrate: add a flags parameter to migrate_vma
nouveau: fix storing invalid ptes
nouveau/hmm: support mapping large sysmem pages
nouveau: fix mapping 2MB sysmem pages
nouveau/hmm: fault one page at a time
mm/hmm: add tests for hmm_pfn_to_map_order()
mm/hmm: provide the page mapping order in hmm_range_fault()
Here is the "big" set of changes to the driver core, and some drivers
using the changes, for 5.9-rc1.
"Biggest" thing in here is the device link exposure in sysfs, to help
to tame the madness that is SoC device tree representations and driver
interactions with it.
Other stuff in here that is interesting is:
- device probe log helper so that drivers can report problems in
a unified way easier.
- devres functions added
- DEVICE_ATTR_ADMIN_* macro added to make it harder to write
incorrect sysfs file permissions
- documentation cleanups
- ability for debugfs to be present in the kernel, yet not
exposed to userspace. Needed for systems that want it
enabled, but do not trust users, so they can still use some
kernel functions that were otherwise disabled.
- other minor fixes and cleanups
The patches outside of drivers/base/ all have acks from the respective
subsystem maintainers to go through this tree instead of theirs.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylhOQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylGdACeKqxm8IIDZycj0QjLUlPiEwVIROgAnjpf5jAB
mb4jMvgEGsB6/FwxypPG
=RUss
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of changes to the driver core, and some drivers
using the changes, for 5.9-rc1.
"Biggest" thing in here is the device link exposure in sysfs, to help
to tame the madness that is SoC device tree representations and driver
interactions with it.
Other stuff in here that is interesting is:
- device probe log helper so that drivers can report problems in a
unified way easier.
- devres functions added
- DEVICE_ATTR_ADMIN_* macro added to make it harder to write
incorrect sysfs file permissions
- documentation cleanups
- ability for debugfs to be present in the kernel, yet not exposed to
userspace. Needed for systems that want it enabled, but do not
trust users, so they can still use some kernel functions that were
otherwise disabled.
- other minor fixes and cleanups
The patches outside of drivers/base/ all have acks from the respective
subsystem maintainers to go through this tree instead of theirs.
All of these have been in linux-next with no reported issues"
* tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits)
drm/bridge: lvds-codec: simplify error handling
drm/bridge/sii8620: fix resource acquisition error handling
driver core: add deferring probe reason to devices_deferred property
driver core: add device probe log helper
driver core: Avoid binding drivers to dead devices
Revert "test_firmware: Test platform fw loading on non-EFI systems"
firmware_loader: EFI firmware loader must handle pre-allocated buffer
selftest/firmware: Add selftest timeout in settings
test_firmware: Test platform fw loading on non-EFI systems
driver core: Change delimiter in devlink device's name to "--"
debugfs: Add access restriction option
tracefs: Remove unnecessary debug_fs checks.
driver core: Fix probe_count imbalance in really_probe()
kobject: remove unused KOBJ_MAX action
driver core: Fix sleeping in invalid context during device link deletion
driver core: Add waiting_for_supplier sysfs file for devices
driver core: Add state_synced sysfs file for devices that support it
driver core: Expose device link details in sysfs
driver core: Drop mention of obsolete bus rwsem from kernel-doc
debugfs: file: Remove unnecessary cast in kfree()
...
The initial value of the PCI option register got lost while refactoring
the driver init code. Restore the setting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 2021708e0d ("drm/mgag200: Initialize PCI registers early during device setup")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804065158.21049-1-tzimmermann@suse.de
Take 2 of msm-next pull, this version drops the OPP patch due to [1],
so I'll send the gpu opp/bw scaling patch after the OPP patch lands.
Since I had to force-push I took the opportunity to rebase on
drm-next, and since you already merged in 5.8-rc6 a few fixes from the
last cycle dropped out.
This time around:
* A bunch more a650/a640 (sm8150/sm8250) display and GPU enablement
and fixes
* Enable dpu dither block for 6bpc panels
* dpu suspend fixes
* dpu fix for cursor on 2nd display
* dsi/mdp5 enablement for sdm630/sdm636/sdm660
I also regenerated the register headers, which accounts for a good
bit of the size this time, because we hadn't re-synced the register
headers since the early days of a6xx bringup.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGs_eswoX-E0Ddg5DoEQy35x3GG+6SDXUAjPMrtAWFkqng@mail.gmail.com
The only usage of dcn30_res_pool_funcs is to assign its address to a
const pointer. Make it const to allow the compiler to put it in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The only usage of dcn21_res_pool_funcs is to assign its address to a
const pointer. Make it const to allow the compiler to put it in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The only usage of dcn20_res_pool_funcs is to assign its address to a
const pointer. Make it const to allow the compiler to put it in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The if statement wasn't indented so it's confusing.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's related to the memory manager so move it there.
v2: inline the structure
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's related to the memory manager so move it there.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's more related to memory management than memory
controller.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I suspect the only reason this was set was to avoid touching
the display related registers on arcturus. Someone should
double check this on arcturus with S3.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We never use them.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new helper centralizes the logic in one place.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new helper centralizes the logic in one place.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new helper centralizes the logic in one place.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new helper centralizes the logic in one place.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new helper centralizes the logic in one place.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds a new gmc callback to get the size reserved by the pre-OS
console and provides a helper function for use by gmc IP drivers.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will allow us to split the allocation for systems
where we have to keep the stolen memory around to avoid
S3 issues. This way we don't waste as much memory and
still avoid any screen artifacts during the bios to
driver transition.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than leaving this as a gmc v9 specific hack.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since that is where we store the other data related to
the stolen vga memory.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than open coding it everywhere.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Should be functionally the same since nothing else is
allocated at that point, but let's be exact.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just return early to match other bo_create functions.
v2: check if the bo_ptr is NULL rather than checking the size.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The i2c init/fini functions just register the i2c adapter.
There is no need to call them during hw init/fini. They only
need to be called once per driver init/fini. The previous
behavior broke runtime pm because we unregistered the i2c
adapter during suspend.
Tested-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| [Header Changes]
| - Reworked the FW versioning to include hotfix
| and test bits
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When changing pixel formats for HDR (e.g. ARGB -> FP16)
there are configurations that change from 2 pipes to 1 pipe.
In these cases, it seems that disconnecting MPCC and doing
a surface update at the same time(after unlocking) causes
some registers to be updated slightly faster than others
after unlocking (e.g. if the pixel format is updated to FP16
before the new surface address is programmed, we get
corruption on the screen because the pixel formats aren't
matching). We separate disconnecting MPCC from the rest
of the pipe programming sequence to prevent this.
[How]
Move MPCC disconnect into separate operation than the
rest of the pipe programming.
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There's currently no method to enable multi-stream synchronization from
userspace and we don't check the VSDB bits to know whether or not
specific displays should have the feature enable.
[how]
Add a debugfs entry that controls a new DM debug option,
"force_timing_sync". This debug option will set on any newly created
stream following the change to the debug option.
Expose a new interface from DC that performs the timing sync and a helper
to the "force_timing_sync" debugfs that iterates over the current streams
and modifies the current synchornization state and grouping.
Example usage to force a resync (from an X based desktop):
echo 1 > /sys/kernel/debug/dri/0/amdgpu_dm_force_timing_sync
xset dpms force off && xset dpms force on
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Display goes blank after driver installation.
Aux tuning parameters must be used for 2.x only.
Wrong dc_golden_table offset was used.
[How]
Implement a new enc3_hw_init function without VBIOS constants usage to
be called for 3.x
Calculate dc_golden_table offset using sum of
base dce_info offset and golden table offset
Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During SetPathMode and UpdatePlanes, the plane state can be null. We default
to linear swizzle mode when plane state is null. This resulted in bandwidth
validation failing when trying to set 8K60 mode (which previously passed validation
during rebuild timing list).
[How]
Change the default swizzle mode from linear to 4kb_s and update pitch accordingly.
Signed-off-by: George Shen <george.shen@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How]
Use dc_is_hdmi_signal to determine signal type.
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Sink OUI supported cap is not set so driver skips programming it.
[How]
Revert the change the skips OUI programming if the cap is not set
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some of the DSC debugfs read enteries are missing comments
explaining how to use and how to comprehend the results.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
use correct logger context
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We need to be able to specify bits per pixel for DSC on any
connector.
[How]
Overwrite computed DSC target rate in dsc_cfg, with requested value.
Overwrites for both SST and MST connectors, but in different places, but the process is identical. Overwrites only if DSC is decided to be enabled on that connector.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We need to be able to specify slice height for any connector's DSC
[How]
Overwrite computed parameters in dsc_cfg, with the value needed/
Overwrites for both SST and MST connectors, but in different places, but the process is identical. Overwrites only if DSC is decided to be enabled on that connector.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
updated RAS EEPROM init/threshold sequences to check for device support
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enabled GECC error injection and query support
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
what:
the MQD's save and restore of KCQ (kernel compute queue)
cost lots of clocks during world switch which impacts a lot
to multi-VF performance
how:
introduce a paramter to control the number of KCQ to avoid
performance drop if there is no kernel compute queue needed
notes:
this paramter only affects gfx 8/9/10
v2:
refine namings
v3:
choose queues for each ring to that try best to cross pipes evenly.
v4:
fix indentation
some cleanupsin the gfx_compute_queue_acquire()
v5:
further fix on indentations
more cleanupsin gfx_compute_queue_acquire()
TODO:
in the future we will let hypervisor driver to set this paramter
automatically thus no need for user to configure it through
modprobe in virtual machine
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During driver's probe, when it hits bad gpu tag in eeprom i2c
init calling(the tag was set when reported bad page reaches
bad page threshold in last driver's working loop), there are
some strategys to deal with the cases:
1. when the module parameter amdgpu_bad_page_threshold = 0,
that means page retirement feature is disabled, so just resetting
the eeprom is fine.
2. When amdgpu_bad_page_threshold is not 0, and moreover, user
sets one bigger valid data in order to make current boot up
succeeds, correct eeprom header tag and do not break booting.
3. For other cases, driver's probe will be broken.
v2: Just update eeprom header tag instead of resetting the whole
table header when user sets one bigger threshold data.
v3: Use dev_info/dev_err to print PCI device information, which
helps in mGPU case.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When amdgpu_bad_page_threshold = 0, bad page reservation stuffs
are skipped in either UMC ECC irq or page retirement calling of
sync flood isr.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bad page information should not be exposed by sysfs when
bad page retirement is disabled, so decouple it from ras
sysfs group creating, and add one guard before creating.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add one definition for the RAS module's FS name. It's used
in both debugfs and sysfs cases.
v2: Use static variable instead of macro definition.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
RAS flags needs to be cleaned as well when user requires
one clean eeprom.
v2: RAS flags shall be restored after eeprom reset succeeds.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When GPU executes recovery and retriving bad GPU tag
from external eerpom device, the recovery will be broken
and error message is printed as well for user's awareness.
v2: Refine warning message in threshold reaching case, and
fix spelling typo.
v3: Fix explicit calling of bad gpu.
v4: Rename function names.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Once the bad page saved to eeprom reaches the configured
threshold, ras recovery will be issued to notify user.
v2: Fix spelling typo.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Once the ras recovery is issued from eeprom write itself,
bad page reservation should be ignored, otherwise, recursive
calling of writting to eeprom would happen.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When retrieving bad gpu tag from eeprom, GPU init should
fail as the GPU needs to be retired for further check.
v2: Fix spelling typo, correct the condition to detect
bad gpu tag and refine error message.
v3: Refine function argument name.
v4: Fix missing check of returning value of i2c
initialization error case.
v5: Use dev_err to print PCI information in dmesg instead
of DRM_ERROR.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This tag will be hired for bad gpu detection in eeprom's access.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bad page threshold value should be valid in the range between
-1 and max records length of eeprom. It could determine when
saved bad pages exceed threshold value, and proceed corresponding
actions.
v2: When using the default typical value, it should be min
value between typical value and eeprom max records length.
v3: drop the case of setting bad_page_cnt_threshold to be
0xFFFFFFFF, as it confuses user.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
bad_page_threshold could be configured to enable/disable the
associated bad page retirement feature in RAS.
When it's -1, ras will use typical bad page failure value to
handle bad page retirement.
When it's 0, disable bad page retirement, and no bad page
will be recorded and saved.
For other valid value, driver will use this manual value
as the threshold value of totoal bad pages.
v2: correct documentation of this parameter.
v3: remove confused statement in documentation.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Event bitmask is a 64-bit mask with only 1 bit set. Sending this
event bitmask in KFD SMI event message is both wasteful of memory
and potentially limiting to only 64 events. Instead send event
index in SMI event message.
Please note this change does not break the ABI for the two event
types defined so far. The new index is identical to the mask used
before.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_dp_mst_allocate_vcpi() invokes
drm_dp_mst_topology_get_port_validated(), which increases the refcount
of the "port".
These reference counting issues take place in two exception handling
paths separately. Either when “slots” is less than 0 or when
drm_dp_init_vcpi() returns a negative value, the function forgets to
reduce the refcnt increased drm_dp_mst_topology_get_port_validated(),
which results in a refcount leak.
Fix these issues by pulling up the error handling when "slots" is less
than 0, and calling drm_dp_mst_topology_put_port() before termination
when drm_dp_init_vcpi() returns a negative value.
Fixes: 1e797f556c ("drm/dp: Split drm_dp_mst_allocate_vcpi")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719154545.GA41231@xin-virtual-machine
Use SET_LATE_SYSTEM_SLEEP_PM_OPS in DSS submodules to force runtime PM
suspend and resume.
We use suspend late version so that omapdrm's system suspend callback is
called first, as that will disable all the display outputs after which
it's safe to force DSS into suspend.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200618095153.611071-1-tomi.valkeinen@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Fixes: cef7663003 ("drm/omap: Prepare DSS for probing without legacy platform data")
Cc: stable@vger.kernel.org # v5.7+
Tested-by: Tony Lindgren <tony@atomide.com>
The connector type for DISPC's DPI videoport was set the LVDS instead of
DPI. This causes any DPI panel setup to fail with tidss, making all DPI
panels unusable.
Fix this by using correct connector type.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fixes: 32a1795f57 ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Cc: stable@vger.kernel.org # v5.7+
Link: https://patchwork.freedesktop.org/patch/msgid/20200604080214.107159-1-tomi.valkeinen@ti.com
Reviewed-by: Jyri Sarha <jsarha@ti.com>
A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory
subsystem and its drivers, starting out with a set of cleanup
patches.
A larger driver for the Tegra memory controller that was accidentally
missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware blobs
The tegra firmware driver gets extended to export some debug information
Various updates to i.MX firmware drivers, mostly cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space.
A new firmware based trusted platform module (fTPM) driver is added
based on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for identifying
a machine through the SMCCC ARCH_SOC_ID firmware interface rather than
by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device code.
There are also a number of updates to SoC specific drivers,
the main ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver
-----BEGIN PGP SIGNATURE-----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=nezz
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
Now that the corresponding feature bit has been renamed,
rename the quirk too - it's about special ways to
do DMA, not necessarily about the IOMMU.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds support for G200 desktop cards. We can reuse the whole
memory and modesetting code. A few PCI and DAC register values have to
be updated accordingly.
The most significant change is in the PLL setup. The driver parses the
device's BIOS to retrieve clock limits and reference clocks. With no BIOS
found, safe defaults are being used.
v2:
* copy BIOS ROM to system memory and access with regular
load/store; resolves potential HW limitations
* fix some stray whitespaces
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Co-developed-by: Egbert Eich <eich@suse.com>
Signed-off-by: Egbert Eich <eich@suse.com>
Co-developed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-9-tzimmermann@suse.de
The unique revision id is only useful for G200SE devices. Store the
value in model-specific data within struct mga_device. While at it,
the patch also adds an init helper for the value.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-8-tzimmermann@suse.de
MGA cards can run in traditional VGA mode or an enhanced MGA mode; with
the latter being required for KMS. So far, MGA mode was enabled during
modesetting. As it's fundamental for device operation, the patch moves
it next to the device register setup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-5-tzimmermann@suse.de
So far, PCI option registers were initialized as part of modesetting,
which is late in the process. As these registers control fundamental
operation, they should be set early.
The patch moves the PCI option handling into device register setup,
before even the device MMIO memory is being mapped. No functional
changes made.
Moving the PCI code next to the device-register setup also allows to
remove the has_sdram field from struct mga_device. The state is now
local to the init helper.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-4-tzimmermann@suse.de
The mgag200 driver maps registers into the address space. Move the
code into a separate helper function. No functional changes.
One small difference is in the handling of SDRAM/SGRAM. MGA devices
can come with either SDRAM or SGRAM. So far, the driver checked for
SDRAM, which is the common case. The patch moves this code into a
separate helper and checks for SGRAM, which is the special case. The
test itself is the same as before.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-3-tzimmermann@suse.de
SHMEM pages use write-combine caching by default, but can also use the
platform's default page caching. Doing so may improve the performance
of I/O on the framebuffer.
Mgag200's hardware does not access framebuffer pages directly (i.e.,
via DMA), so enabling caching does not have an effect on consistency
of the framebuffer memory or the displayed data.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-2-tzimmermann@suse.de
This turns the ast's device cleanup code into a managed release helper
function. Note that the code uses devres helpers. The release function
switches the device back to VGA mode and therefore runs during HW device
cleanup; not at DRM device cleanup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-10-tzimmermann@suse.de
The ast driver loads firmware for the DP501 display encoder. The
patch replaces the removal code with a managed release function.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-8-tzimmermann@suse.de
Turns struct ast_private into a subclass of struct drm_device by
embedding the latter. This allows for using DRM's managed device
allocation.
The use of struct drm_device.dev_private is deprecated. The patch
converts the last remaining users to to_ast_private().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-7-tzimmermann@suse.de
Several places in ast use ast->dev, when a dev pointer is already
available within the function. Remove the extra indirection. No
functional changes made.
This is just a small cleanup before embedding the DRM device instance
in struct ast_private.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-6-tzimmermann@suse.de
The ast code still references dev_private in several place when looking
up the ast device structure. Convert the remaining locations to use
to_ast_private().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-5-tzimmermann@suse.de
The ast driver's load and unload functions are left-overs from when
struct drm_driver.load/unload was still in use. The PCI probe helper
allocated the DRM device and ran load to initialize it.
This patch replaces this code with device create and destroy. The
main difference is that the device's create function allocates the
DRM device and ast structures in the same place. This will be required
for switching ast to managed allocations.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-4-tzimmermann@suse.de
Putting the DRM driver to the top of the file and the PCI code to the
bottom makes ast_drv.c more readable. While at it, the patch prefixes
file-scope variables with ast_.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-3-tzimmermann@suse.de
Only single instances of CRTC and connector are supported per
device. Embed both in ast's structure and remove the individual
memory allocations. DRM's CRTC cleanup helpers replace the rsp.
destroy function in ast.
While at it, also convert to_ast_connector() to a function.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-2-tzimmermann@suse.de
Userspace can provoke this, we generally don't allow userspace to spam
dmesg. Tune it down to debug. Unfortunately we don't have easy access
to the drm_device here (not at all without changing a few things), so
leave it as old style dmesg output for now.
References: https://patchwork.freedesktop.org/series/80146/
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: "Christian König" <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200801092625.1107609-1-daniel.vetter@ffwll.ch
The previous memset operation was not correctly zeroing the alpha
channel to compute the crc, and as a result, the IGT subtest
kms_cursor_crc/pipe-A-cursor-alpha-transparent fails.
Fixes: db7f419c06 ("drm/vkms: Compute CRC with Cursor Plane")
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730202524.5upzuh4irboru7my@smtp.gmail.com
The function "int drm_panel_add(struct drm_panel *panel)"
always returns 0, this return value is meaningless.
Also, there is no need to check return value which calls
"drm_panel_add and", error branch code will never run.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200801120216.8488-1-bernard@vivo.com
Use switch - case to downshift from the current link rate. It's a small
loop now, so fine to be replaced with switch - case. With a loop, it is
confusing and hard to follow as reported below.
The patch d76271d226: "drm: xlnx: DRM/KMS driver for Xilinx ZynqMP
DisplayPort Subsystem" from Jul 7, 2018, leads to the following
static checker warning:
drivers/gpu/drm/xlnx/zynqmp_dp.c:594 zynqmp_dp_mode_configure()
error: iterator underflow 'bws' (-1)-2
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1596065445-4630-1-git-send-email-hyun.kwon@xilinx.com
It is a very strange concept to call a function which just
calls back the caller for the functions parameters.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/382085/
Instead just initialize the memory type parameters
before calling ttm_bo_init_mm.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/382086/
Instead just initialize the memory type parameters
before calling ttm_bo_init_mm.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/382083/
Instead just initialize the memory type parameters
before calling ttm_bo_init_mm.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/382081/
Instead just initialize the memory type parameters
before calling ttm_bo_init_mm.
v2: keep extra system domain handling
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/382082/
Instead just initialize the memory type parameters
before calling ttm_bo_init_mm.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/382084/
Instead just initialize the memory type parameters
before calling ttm_bo_init_mm.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/382080/
Instead use a boolean field in the memory manager structure.
Also invert the meaning of the field since the use of a TT
structure is the special case here.
v2: cleanup zero init.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/382079/
Instead of repeating that in each driver.
v2: keep the caching limitation for VMWGFX for now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/382078/
Use kthread_create_worker to simplify the code and optimise
the manager struct: msm_drm_thread. With this change, we
could remove struct element (struct task_struct *thread &
struct kthread_worker worker), instead, use one point (struct
kthread_worker *worker).
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This commit adds support for the MDP5 IP on Snapdragon
636/660.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This also applies to sdm630/636 and their SDA
counterparts.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This commit adds support for the MDP5 IP on Snapdragon
630. The configuration is different from SDM660's, as
the latter one has two DSI outputs.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
These SoCs make use of the 14nm phy, but at different
addresses than other 14nm units.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Initialize hardware clock-gating registers on A640 and A650 GPUs.
At least for A650, this solves some performance issues.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This will allow supporting different hwcg tables for a6xx.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This brings up basic video mode functionality for SM8250 DPU. Command mode
and dual mixer/intf configurations are not working, future patches will
address this. Scaler functionality and multiple planes is also untested.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This brings up basic video mode functionality for SM8150 DPU. Command mode
and dual mixer/intf configurations are not working, future patches will
address this. Scaler functionality and multiple planes is also untested.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
[fixup max_linewidth warning]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Calculate the correct timings for displayport, from downstream driver.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This fixes flushing of INTF_2 and INTF_3 on SM8150 and SM8250 hardware.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The INTF_INPUT_CTRL feature is not available on sdm845, so don't set it.
This also adds separate feature bits for INTF (based on downstream) instead
of using CTL feature bit for it, and removes the unnecessary NULL check in
the added bind_pingpong_blk function.
Fixes: 73bfb790ac ("msm:disp:dpu1: setup display datapath for SC7180 target")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This isn't something that ever changes between planes, so move it to
dpu_caps struct. Making this change will allow more re-use in the
"SSPP sub blocks config" part of the catalog, in particular when adding
support for SM8150 and SM8250 which have different max_linewidth.
This also sets max_hdeci_exp/max_vdeci_exp to 0 for sc7180, as decimation
is not supported on the newest DPU versions. (note that decimation is not
implemented, so this changes nothing)
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Update the UBWC registers to the right values for sm8150 and sm8250.
This removes broken dpu_hw_reset_ubwc, which doesn't work because the
"force blk offset to zero to access beginning of register region" hack is
copied from downstream, where mapped region starts 0x1000 below what is
used in the upstream driver.
Also simplifies the overly complicated change that was introduced in
e4f9bbe9f8 to work around dpu_hw_reset_ubwc being broken.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
All DPU versions starting from 4.0 use the sdm845 version, so check for
that instead of checking each version individually. This chooses the right
function for sm8150 and sm8250.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This is required for A640 and A650 to be able to share UBWC-compressed
images with other HW such as display, which expect this configuration.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Small cleanup, lets not open-code bits/bitfields that are properly
defined in the rnndb xml (and therefore have builders in the generated
headers)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
We haven't sync'd for a while.. pull in updates to get definitions for
some fields in pkt7 payloads.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This sets up bw tables for A640/A650 similar to A618/A630, 0 DDR bandwidth
vote, and the CNOC vote. A640 has the same CNOC addresses as A630 and was
working, but this is required for A650 to work.
Eventually the bw table should be filled by querying the interconnect
driver for each BW in the dts, but use these dummy tables for now.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
A650 has a separate RSCC region, so dump RSCC registers separately, reading
them from the RSCC base. Without this change a GPU hang will cause a system
reset if CONFIG_DEV_COREDUMP is enabled.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
We don't expect to find vbif_nrt or regdma on sdm845, but were clogging
up dmesg with errors about it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
If split-lm is used (for ex, on sdm845), we can have multiple ping-
pongs, but only a single phys encoder. We need to configure dithering
on each of them.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Kalyan Thota <kalyan_t@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
On targets where GMU is available, GMU takes over the ownership of GX GDSC
during its initialization. So, move the refcount-get on GX PD before we
initialize the GMU. This ensures that nobody can collapse the GX GDSC
once GMU owns the GX GDSC. This patch fixes some GMU OOB errors seen
during GPU wake up during a system resume.
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
On SDM845 and SC7180 DSI needs to express a performance state
requirement on a power domain depending on the clock rates.
Use OPP table from DT to register with OPP framework and use
dev_pm_opp_set_rate() to set the clk/perf state.
dev_pm_opp_set_rate() is designed to be equivalent to clk_set_rate()
for devices without an OPP table, hence the change works fine
on devices/platforms which only need to set a clock rate.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
On some qualcomm platforms DPU needs to express a performance state
requirement on a power domain depending on the clock rates.
Use OPP table from DT to register with OPP framework and use
dev_pm_opp_set_rate() to set the clk/perf state.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This can happen a lot when things go pear shaped. Lets not flood dmesg
when this happens.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This patch changes the plumbing to send the devfreq recommended opp rather
than the frequency. Also consolidate and rearrange the code in a6xx to set
the GPU frequency and the icc vote in preparation for the upcoming
changes for GPU->DDR scaling votes.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This change enables dither block for primary interface
in display.
Enabled for 6bpc in the current version.
Changes in v1:
- Remove redundant error checks (Rob).
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
If there is no interconnect-names, but there is an interconnects
property, then of_icc_get(dev, "gfx-mem"); would return an error
rather than NULL.
Also, if there is no interconnect-names property, there will never
be a ocmem path. But of_icc_get(dev, "ocmem") would return -EINVAL
instead of -ENODATA. Just don't bother trying in this case.
v2: explicity check for interconnect-names property
Fixes: 08af4769c7 ("drm/msm: handle for EPROBE_DEFER for of_icc_get")
Fixes: 00bb9243d3 ("drm/msm/gpu: add support for ocmem interconnect path")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
drm/i915 features for v5.9, batch #2
Highlights:
- Very early DG1 enabling (Abdiel, Lucas, Anusha)
Gem/GT:
- Fix spinlock recursion on signaling a signaled request (Chris)
- Perf: Use GTT when saving/restoring engine GPR (Umesh Nerlige Ramappa)
- SSEU refactoring, debugfs move under gt/ (Daniele, Venkata Sandeep Dhanalakota)
- Various GT refactoring and cleanup, preparation for future changes (Daniele)
- Adjust HuC state accordingly after GuC fetch error (Michał Winiarski)
- UC debugfs updates (Michał Winiarski)
- Only revoke the GGTT mmappings on aperture detiling changes (Chris)
- Only revoke mmap handlers if active (Chris)
- Split the context's obj:vma lut into its own mutex (Chris)
- Various memory, mmap and performance optimisations (Chris)
- Improve system stability in case of false CS events (Chris)
- Various refactorings and cleanup (Chris)
- Always reset the engine on execlist failures (Chris)
- Trace placement of timeline HWSP (Chris)
- Update dma-attributes for our sg DMA (Chris)
Display:
- TGL CDCLK workaround tweaks to unbreak 8K display support (Stanislav)
- A number of FBC fixes, along with i865 FBC enabling (Ville)
- Validate MST modes against PBN limits (Lyude, Shawn Lee)
- Do not access non-existing swizzle registers (Lucas)
- Revert GEN11+ HBR3 rate fix that caused issues on TGL (Matt Atwood)
- Update TGL+ combo phy initialization to match spec update (José)
- Fix HDCP Content Protection property state machine (Anshuman)
- Fix HDCP revoked keys handling (Ram)
- Improve DDI BUF status checks and waits (Manasi)
- Various SDVO+HDMI+DVI fixes around colorimetry, clocking, pixel repeat etc. (Ville)
- DP voltage swing function refactoring (José)
- WARN if max vswing/pre-emphasis violates the DP spec (Ville)
Other:
- Add new EHL PCI IDs (José)
- Unify struct intel_digital_port variable naming (Lucas)
- Various taint updates to aid debugging and improve CI (Michał Winiarski)
- Straggler conversions to new mmio register accessors (Daniele)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87a70029vz.fsf@intel.com
amd-drm-fixes-5.8-2020-07-30:
amdgpu:
- Revert a fix which caused other regressions
- Fix potential kernel info leak
- Fix a use-after-free bug that was uncovered by another change in 5.7
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730154338.244104-1-alexander.deucher@amd.com
Accept the DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK()
family of modifiers to handle broken userspace
Xorg modesetting and Mesa drivers. Existing Mesa
drivers are still aware of only these older
format modifiers which do not differentiate
between different variations of the block linear
layout. When the format modifier support flag was
flipped in the nouveau kernel driver, the X.org
modesetting driver began attempting to use its
format modifier-enabled framebuffer path. Because
the set of format modifiers advertised by the
kernel prior to this change do not intersect with
the set of format modifiers advertised by Mesa,
allocating GBM buffers using format modifiers
fails and the modesetting driver falls back to
non-modifier allocation. However, it still later
queries the modifier of the GBM buffer when
creating its DRM-KMS framebuffer object, receives
the old-format modifier from Mesa, and attempts
to create a framebuffer with it. Since the kernel
is still not aware of these formats, this fails.
Userspace should not be attempting to query format
modifiers of GBM buffers allocated with a non-
format-modifier-aware allocation path, but to
avoid breaking existing userspace behavior, this
change accepts the old-style format modifiers when
creating framebuffers and applying them to planes
by translating them to the equivalent new-style
modifier. To accomplish this, some layout
parameters must be assumed to match properties of
the device targeted by the relevant ioctls. To
avoid perpetuating misuse of the old-style
modifiers, this change does not advertise support
for them. Doing so would imply compatibility
between devices with incompatible memory layouts.
Tested with Xorg 1.20 modesetting driver,
weston@c46c70dac84a4b3030cd05b380f9f410536690fc,
gnome & KDE wayland desktops from Ubuntu 18.04,
and sway 1.5
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Fixes: fa4f4c213f ("drm/nouveau/kms: Support NVIDIA format modifiers")
Link: https://lkml.org/lkml/2020/6/30/1251
Signed-off-by: James Jones <jajones@nvidia.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Setup an RGB HW pipe as cursor which can be used on
secondary interface.
For SC7180 2 HW pipes are enumerated as cursors
1 - primary interface
2 - secondary interface
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
"The PM core always increments the runtime usage counter
before calling the ->suspend() callback and decrements it
after calling the ->resume() callback"
DPU and DSI are managed as runtime devices. When
suspend is triggered, PM core adds a refcount on all the
devices and calls device suspend, since usage count is
already incremented, runtime suspend was not getting called
and it kept the clocks on which resulted in target not
entering into XO shutdown.
Add changes to force suspend on runtime devices during pm sleep.
Changes in v1:
- Remove unnecessary checks in the function
_dpu_kms_disable_dpu (Rob Clark).
Changes in v2:
- Avoid using suspend_late to reset the usagecount
as suspend_late might not be called during suspend
call failures (Doug).
Changes in v3:
- Use force suspend instead of managing device usage_count
via runtime put and get API's to trigger callbacks (Doug).
Changes in v4:
- Check the return values of pm_runtime_force_suspend and
pm_runtime_force_resume API's and pass appropriately (Doug).
Changes in v5:
- With v4 patch, test cycle has uncovered issues in device resume.
On bubs: cmd tx failures were seen as SW is sending panel off
commands when the dsi resources are turned off.
Upon suspend, DRM driver will issue a NULL composition to the
dpu, followed by turning off all the HW blocks.
v5 changes will serialize the NULL commit and resource unwinding
by handling them under PM prepare and PM complete phases there by
ensuring that clks are on when panel off commands are being
processed.
Changes in v6:
- Use drm_mode_config_helper_suspend/resume() instead of legacy API
drm_atomic_helper_suspend/resume() (Doug).
Trigger runtime callbacks from the suspend/resume call to turn
off the resources.
Changes in v7:
- Add "__maybe_unused" to the functions to avoid compilation
failures. Cleanup unnecessary configs (Doug).
Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Check for errors instead of silently not using icc if the msm driver
probes before the interconnect driver.
Allow ENODATA for ocmem path, as it is optional and this error
is returned when "gfx-mem" path is provided but not "ocmem".
Because msm_gpu_cleanup assumes msm_gpu_init has been called, the icc path
init needs to be after msm_gpu_init for the error path to work.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
These never get set back to 0 when probing fails, so an attempt to probe
again results in broken behavior. Fix the problem by setting thse to zero
before they are used.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
adreno_gpu_init calls pm_runtime_enable, so adreno_gpu_cleanup needs to
call pm_runtime_disable.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Rob Clark <robdclark@chromium.org>
This regressed some working configurations so revert it. Will
fix this properly for 5.9 and backport then.
This reverts commit 38e0c89a19.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
1. For Navi12, CHIP_SIENNA_CICHLID, skip tmr load operation;
2. Check pointer before release firmware.
v2: use CHIP_SIENNA_CICHLID instead
v3: remove local "bool ret"; fix grammer issue
v4: use my name instead of "root"
v5: fix grammer issue and indent issue
Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Assigning false to block->status.hw overwrites PSP's previous
hardware status, which causes the PSP to Resume operation after
hardware init.
Remove this assignment and let the PSP execute Resume operation
when it is told to.
v2: Remove the braces.
v3: Modify the description.
Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trying to grab dma_resv_lock while in commit_tail before we've done
all the code that leads to the eventual signalling of the vblank event
(which can be a dma_fence) is deadlock-y. Don't do that.
Here the solution is easy because just grabbing locks to read
something races anyway. We don't need to bother, READ_ONCE is
equivalent. And avoids the locking issue.
v2: Also take into account tmz_surface boolean, plus just delete the
old code.
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-rdma@vger.kernel.org
Cc: amd-gfx@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove casting the values returned by memory allocation function.
Coccinelle emits WARNING:
./drivers/gpu/drm/amd/powerplay/hwmgr/vega20_processpptables.c:893:37-46: WARNING: casting value returned by memory allocation function to (PPTable_t *) is useless.
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Compiler leaves a 4-byte hole near the end of `dev_info`, causing
amdgpu_info_ioctl() to copy uninitialized kernel stack memory to userspace
when `size` is greater than 356.
In 2015 we tried to fix this issue by doing `= {};` on `dev_info`, which
unfortunately does not initialize that 4-byte hole. Fix it by using
memset() instead.
Cc: stable@vger.kernel.org
Fixes: c193fa91b9 ("drm/amdgpu: information leak in amdgpu_info_ioctl()")
Fixes: d38ceaf99e ("drm/amdgpu: add core driver (v4)")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes a race condition that causes a use-after-free during
amdgpu_dm_atomic_commit_tail. This can occur when 2 non-blocking commits
are requested and the second one finishes before the first. Essentially,
this bug occurs when the following sequence of events happens:
1. Non-blocking commit #1 is requested w/ a new dm_state #1 and is
deferred to the workqueue.
2. Non-blocking commit #2 is requested w/ a new dm_state #2 and is
deferred to the workqueue.
3. Commit #2 starts before commit #1, dm_state #1 is used in the
commit_tail and commit #2 completes, freeing dm_state #1.
4. Commit #1 starts after commit #2 completes, uses the freed dm_state
1 and dereferences a freelist pointer while setting the context.
Since this bug has only been spotted with fast commits, this patch fixes
the bug by clearing the dm_state instead of using the old dc_state for
fast updates. In addition, since dm_state is only used for its dc_state
and amdgpu_dm_atomic_commit_tail will retain the dc_state if none is found,
removing the dm_state should not have any consequences in fast updates.
This use-after-free bug has existed for a while now, but only caused a
noticeable issue starting from 5.7-rc1 due to 3202fa62f ("slub: relocate
freelist pointer to middle of object") moving the freelist pointer from
dm_state->base (which was unused) to dm_state->context (which is
dereferenced).
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207383
Fixes: bd200d190f ("drm/amd/display: Don't replace the dc_state for fast updates")
Reported-by: Duncan <1i5t5.duncan@cox.net>
Signed-off-by: Mazin Rezk <mnrzk@protonmail.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update GC golden setting for navy_flounder.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's in accordance with pmfw 65.5.0 for navy_flounder.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add support for umc 8.7 initialization
add umc 8.7 source to makefile
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It doesn't expose PPTable descriptor on APU platform. So max/min
temperature values cannot be got from APU platform.
v2: Stoney needs to skip crit temperature as well.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Test expects that we also read HPD_IRQ_VECTOR when checking for
symbol loss as well lane status.
[How]
Read bytes 0x200-0x205 instead of just 0x202-0x205
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We need to be able to specify slice width for DSC on aconnector
[How]
Getting slice width parameter from debugfs entry, if it is
a valid the value is set in connector's dsc preffered settings
structure. Which then overwrites dsc_cfg structure's parameters
if DSC is decided to be enabled. Works for both SST and MST.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Feature requires synchronization of dig, pipe, and cursor locking
between driver and fw.
[How]
Set flag to force psr to use hw lock mgr.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
ramp_up_dispclk_with_dpp is to change dispclk, dppclk and dprefclk
according to bandwidth requirement. call stack: rv1_update_clocks -->
update_clocks --> dcn10_prepare_bandwidth / dcn10_optimize_bandwidth
--> prepare_bandwidth / optimize_bandwidth. before change dcn hw,
prepare_bandwidth will be called first to allow enough clock,
watermark for change, after end of dcn hw change, optimize_bandwidth
is executed to lower clock to save power for new dcn hw settings.
below is sequence of commit_planes_for_stream:
step 1: prepare_bandwidth - raise clock to have enough bandwidth
step 2: lock_doublebuffer_enable
step 3: pipe_control_lock(true) - make dchubp register change will
not take effect right way
step 4: apply_ctx_for_surface - program dchubp
step 5: pipe_control_lock(false) - dchubp register change take effect
step 6: optimize_bandwidth --> dc_post_update_surfaces_to_stream
for full_date, optimize clock to save power
at end of step 1, dcn clocks (dprefclk, dispclk, dppclk) may be
changed for new dchubp configuration. but real dcn hub dchubps are
still running with old configuration until end of step 5. this need
clocks settings at step 1 should not less than that before step 1.
this is checked by two conditions: 1. if (should_set_clock(safe_to_lower
, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) ||
new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz)
2. request_dpp_div = new_clocks->dispclk_khz > new_clocks->dppclk_khz
the second condition is based on new dchubp configuration. dppclk
for new dchubp may be different from dppclk before step 1.
for example, before step 1, dchubps are as below:
pipe 0: recout=(0,40,1920,980) viewport=(0,0,1920,979)
pipe 1: recout=(0,0,1920,1080) viewport=(0,0,1920,1080)
for dppclk for pipe0 need dppclk = dispclk
new dchubp pipe split configuration:
pipe 0: recout=(0,0,960,1080) viewport=(0,0,960,1080)
pipe 1: recout=(960,0,960,1080) viewport=(960,0,960,1080)
dppclk only needs dppclk = dispclk /2.
dispclk, dppclk are not lock by otg master lock. they take effect
after step 1. during this transition, dispclk are the same, but
dppclk is changed to half of previous clock for old dchubp
configuration between step 1 and step 6. This may cause p-state
warning intermittently.
[How]
for new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz, we
need make sure dppclk are not changed to less between step 1 and 6.
for new_clocks->dispclk_khz > clk_mgr_base->clks.dispclk_khz,
new display clock is raised, but we do not know ratio of
new_clocks->dispclk_khz and clk_mgr_base->clks.dispclk_khz,
new_clocks->dispclk_khz /2 does not guarantee equal or higher than
old dppclk. we could ignore power saving different between
dppclk = displck and dppclk = dispclk / 2 between step 1 and step 6.
as long as safe_to_lower = false, set dpclk = dispclk to simplify
condition check.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Need a mechanism to force enable DSC on any connector
[How]
Debugfs entry overwrites newly added connector's dsc preffered
settings structure and sets dsc_clock_en flag on it.
During the attomic commit, depending if connector is SST or
MST, we will enable DSC manually by overwriting stream's DSC flag.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Each asic can optimize best based on its capabilities
[How]
Optimizing timing for a new pixel clock
Signed-off-by: Reza Amini <Reza.Amini@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Programming DCN is explicitly forbidden during idle optimzations allowed
state. Existing implemenation relies on OS/DM, which is not robust. Instead
DC should sequence this.
Note that DC will not re-enter idle optimized state on its own, it is only
responsible for catching out of sequence calls. It is still DM
responsibility to sequence appropriate for optimized power, but this change
removes the requirement for DM to cover the .1% case.
[How]
- elevate updates during idle optimized state to full updates
- disable idle power optimizations prior to programming
Signed-off-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Setting abm level does not correctly update CRTC state. As a result
no surface update is added to dc stream state and triggers warning.
[How]
Correctly update CRTC state when setting abm level property.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of keeping the IPU clock enabled constantly, enable and disable
it on demand, when the IPU plane is used. That way, we won't use any
extra power when the IPU is not used.
v2: Explain the reason of this patch
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730144830.10479-4-paul@crapouillou.net
When configuring the IPU for packed YUV 4:2:2, depending on the scaling
ratios given by the source and destination resolutions, it is possible
to crash the IPU block, to the point where a software reset of the IP
does not fix it. This can happen anytime, in the first few frames, or
after dozens of minutes. The same crash also happens when the IPU is
fully controlled by the LCD controller (in that case no HW register is
written at any moment after startup), which points towards a hardware
bug.
Thanksfully multiplanar YUV is not affected.
Until this bug is fixed or worked around, address this issue by removing
support for YUV 4:2:2 on the IPU of the JZ4725B.
v2: Update commit message (remove the "crash beyond repair" bit)
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730144830.10479-3-paul@crapouillou.net
On older SoCs, it is necessary to restart manually the IPU when a frame
is done processing. Doing so on newer SoCs (JZ4760/70) kinds of work
too, until the input or output resolutions or the framerate are too
high.
Make it work properly on newer SoCs by letting the LCD controller
trigger the IPU frame restart signal.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730144830.10479-2-paul@crapouillou.net
This regressed some working configurations so revert it. Will
fix this properly for 5.9 and backport then.
This reverts commit 38e0c89a19.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This patch fixes a race condition that causes a use-after-free during
amdgpu_dm_atomic_commit_tail. This can occur when 2 non-blocking commits
are requested and the second one finishes before the first. Essentially,
this bug occurs when the following sequence of events happens:
1. Non-blocking commit #1 is requested w/ a new dm_state #1 and is
deferred to the workqueue.
2. Non-blocking commit #2 is requested w/ a new dm_state #2 and is
deferred to the workqueue.
3. Commit #2 starts before commit #1, dm_state #1 is used in the
commit_tail and commit #2 completes, freeing dm_state #1.
4. Commit #1 starts after commit #2 completes, uses the freed dm_state
1 and dereferences a freelist pointer while setting the context.
Since this bug has only been spotted with fast commits, this patch fixes
the bug by clearing the dm_state instead of using the old dc_state for
fast updates. In addition, since dm_state is only used for its dc_state
and amdgpu_dm_atomic_commit_tail will retain the dc_state if none is found,
removing the dm_state should not have any consequences in fast updates.
This use-after-free bug has existed for a while now, but only caused a
noticeable issue starting from 5.7-rc1 due to 3202fa62f ("slub: relocate
freelist pointer to middle of object") moving the freelist pointer from
dm_state->base (which was unused) to dm_state->context (which is
dereferenced).
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207383
Fixes: bd200d190f ("drm/amd/display: Don't replace the dc_state for fast updates")
Reported-by: Duncan <1i5t5.duncan@cox.net>
Signed-off-by: Mazin Rezk <mnrzk@protonmail.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Compiler leaves a 4-byte hole near the end of `dev_info`, causing
amdgpu_info_ioctl() to copy uninitialized kernel stack memory to userspace
when `size` is greater than 356.
In 2015 we tried to fix this issue by doing `= {};` on `dev_info`, which
unfortunately does not initialize that 4-byte hole. Fix it by using
memset() instead.
Cc: stable@vger.kernel.org
Fixes: c193fa91b9 ("drm/amdgpu: information leak in amdgpu_info_ioctl()")
Fixes: d38ceaf99e ("drm/amdgpu: add core driver (v4)")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VMAs with a pg_offs that's offset from the start of the vma_node need
to adjust the offset within the BO accordingly. This matches the
offset calculation in ttm_bo_vm_fault_reserved.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Laurent Morichetti <laurent.morichetti@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/381169/
Using dev_err_probe code has following advantages:
- shorter code,
- recorded defer probe reason for debugging,
- uniform error code logging.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200713144324.23654-5-a.hajda@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of error during resource acquisition driver should print error
message only in case it is not deferred probe, using dev_err_probe helper
solves the issue. Moreover it records defer probe reason for debugging.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200713144324.23654-4-a.hajda@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a spelling mistake in a dev_dbg messages. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200724111258.14762-1-colin.king@canonical.com
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. If the serialization primitive is
not disabling preemption implicitly, preemption has to be explicitly
disabled before entering the sequence counter write side critical
section.
The dma-buf reservation subsystem uses plain sequence counters to manage
updates to reservations. Writer serialization is accomplished through a
wound/wait mutex.
Acquiring a wound/wait mutex does not disable preemption, so this needs
to be done manually before and after the write side critical section.
Use the newly-added seqcount_ww_mutex_t instead:
- It associates the ww_mutex with the sequence count, which enables
lockdep to validate that the write side critical section is properly
serialized.
- It removes the need to explicitly add preempt_disable/enable()
around the write side critical section because the write_begin/end()
functions for this new data type automatically do this.
If lockdep is disabled this ww_mutex lock association is compiled out
and has neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lkml.kernel.org/r/20200720155530.1173732-13-a.darwish@linutronix.de
fixed the following warning:
hibmc_drm_drv.c:296:1-18:WARNING: Assignment of 0/1 to bool variable.
hibmc_drm_drv.c:301:2-19: WARNING: Assignment of 0/1 to bool variable.
v2:
using the pci_dev.msi_enabled instead of priv->msi_enabled.
v3:
just call pci_enable_msi() and pci_disable_msi(), it's no need to
set dev->pdev->msi_enabled again.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-By: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1595940907-17874-1-git-send-email-tiantao6@hisilicon.com
Unlike full initialization like normal boot, guest driver won't
pv_notified GVT when vGPU transit from D3->D0. If pv_notified is reset,
later vGPU operations will trigger enter into failsafe mode.
Considering the fact that vGPU will at least notify GVT pv_notified once
before D3/D0 transition, it's safe to skip reset pv_notified in D3->D0.
To test this feature, make sure S3 is enabled in QEMU parameters:
i440fx: PIIX4_PM.disable_s3=0
q35: ICH9-LPC.disable_s3=0
Also need enable sleep option in guest OS if it's disabled.
v2:
- Revise commit message to more accurate description. (Kevin)
- Split patch by logic. (Zhenyu)
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200709071002.247960-3-colin.xu@intel.com
When system enters S3 state, device enters D3 state while RAM remains
powered. From vGPU/GVT perspective, ppgtt_mm is residual in guest memory
during vGPU in D3 state, so that when guest state transits from S3->S0,
ppgtt_mm can be re-used and no need rebuild.
Previous implementation invalidate and destroy ppgtt_mm at DMLR,
regardless the power state transition is S0->S3->S0 (guest suspend or
resume) or OFF->S0 (normal boot/reboot), invalidate and destroy ppgtt_mm
is unnecessary in the former transition case.
The patch saves the vGPU D3/D0 transition state when guest writes the
PCI_PM_CTRL in vGPU's configure space, then in later DMLR, GVT can decide
whether or not invalidate and destroy ppgtt_mm is required. The
d3_entered flags is reset after DMLR.
To test this feature, make sure S3 is enabled in QEMU parameters:
i440fx: PIIX4_PM.disable_s3=0
q35: ICH9-LPC.disable_s3=0
Also need enable sleep option in guest OS if it's disabled.
v2:
- Revise commit message to more accurate description. (Kevin)
- Split patch by logic. (Zhenyu)
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200709071002.247960-2-colin.xu@intel.com
* dbi: fix SPI Type 1 transfer
* drm_fb_helper: use memcpy_io on bochs' sparc64
* mcde: fix stability
* panel: fix display noise on auo,kd101n80-45na
* panel: delay HPD checks for boe_nv133fhm_n61
* bridge: drop connector check in nwl-dsi bridge
* bridge: set proper bridge type for adv7511
* of: fix a double free
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAl8gBZkACgkQaA3BHVML
eiMf4Af+ITzLTKmaaWfQyiaE9KsMNa0dzv2bBpG/H15RevJ40O2qEgY2R4hYmONZ
zMSXLfT8fgj0ZVEac9jE2VoLi6QtAcB+cB9k0jfIL4kT5aG33sek9go/LmAtL9FB
tyqS3k4lt8wxnVjVJs+Cqiz4BpnKHC9RxxGB8l83kPRbSE+Ifq3sciB0HJx3x6eI
K2FQqphsYuXyIdewJNCoZ5RKHaS9UjQutargnwWi2Tb3OAmUblZxvojbjAtNlHhx
PkOD8/iCygsL87GCawoopLnWaPJTDmOEKmxttzLs37Dqw2rhTsRU47/E6MlBZuwe
LBuXCAAdNs4iRDj9HUoIXnup4YGXOw==
=gfQ2
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-07-28' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* drm: fix possible use-after-free
* dbi: fix SPI Type 1 transfer
* drm_fb_helper: use memcpy_io on bochs' sparc64
* mcde: fix stability
* panel: fix display noise on auo,kd101n80-45na
* panel: delay HPD checks for boe_nv133fhm_n61
* bridge: drop connector check in nwl-dsi bridge
* bridge: set proper bridge type for adv7511
* of: fix a double free
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728110446.GA8076@linux-uq9g
Validate modes in the drm_crtc_helper_funcs.mode_valid() callback, which
is designed for this purpose, instead of doing it in
drm_crtc_helper_funcs.atomic_check().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728151641.26124-3-paul@crapouillou.net
This is confusing, and from my reading of all the drivers only
nouveau got this right.
Just make the API act under driver control of it's own allocation
failing, and don't call destroy, if the page table fails to
create there is nothing to cleanup here.
(I'm willing to believe I've missed something here, so please
review deeply).
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728041736.20689-1-airlied@gmail.com
Just drop the argument from this.
This does ask the question if this is the function vmwgfx
should be using or should it be doing an evict all like
the other drivers.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728034254.20114-1-airlied@gmail.com
Use the new MMU_NOTIFY_MIGRATE event to skip GPU MMU invalidations of
device private memory and handle the invalidation in the driver as part of
migrating device private memory.
Link: https://lore.kernel.org/r/20200723223004.9586-5-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The src_owner field in struct migrate_vma is being used for two purposes,
it acts as a selection filter for which types of pages are to be migrated
and it identifies device private pages owned by the caller.
Split this into separate parameters so the src_owner field can be used
just to identify device private pages owned by the caller of
migrate_vma_setup().
Rename the src_owner field to pgmap_owner to reflect it is now used only
to identify which device private pages to migrate.
Link: https://lore.kernel.org/r/20200723223004.9586-3-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When migrating a range of system memory to device private memory, some of
the pages in the address range may not be migrating. In this case, the non
migrating pages won't have a new GPU MMU entry to store but the
nvif_object_ioctl() NVIF_VMM_V0_PFNMAP method doesn't check the input and
stores a bad valid GPU page table entry.
Fix this by skipping the invalid input PTEs when updating the GPU page
tables.
Link: https://lore.kernel.org/r/20200723223004.9586-2-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The LCDIF in the i.MX6SX and i.MX7 have a second plane called the alpha
plane. Support it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-23-laurent.pinchart@ideasonboard.com
The mxsfb_set_pixel_fmt() and mxsfb_set_bus_fmt() functions both deal
with format configuration, are always called in a row from
mxsfb_crtc_mode_set_nofb(), and set fields from the LCDC_CTRL register.
This requires a read-modify-update cycle in mxsfb_set_bus_fmt(). Make
this more efficient by merging them together.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-21-laurent.pinchart@ideasonboard.com
The mxsfb_set_pixel_fmt() function returns an error when the selected
pixel format is unsupported. This can never happen, as such errors are
caught by the DRM core. Remove the error check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-20-laurent.pinchart@ideasonboard.com
The LCDIF present in the i.MX6SX has extra features compared to
the i.MX28. It has however lost its IP version register, so no official
version number is known. Bump the version to MXSFB_V6 following the i.MX
version, in preparation for support for the additional features.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-18-laurent.pinchart@ideasonboard.com
Extend the Kconfig option description by listing the i.MX7 and i.MX8M
SoCs, as they are supported by the same driver. Replace the list of SoCs
in the short description with just "(e)LCDIF LCD controller" to avoid
expanding it further in the future as support for more SoCs is added.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-17-laurent.pinchart@ideasonboard.com
Enable vblank handling when the CRTC is turned on and disable it when it
is turned off. This requires moving vblank init after the KMS pipeline
initialisation, otherwise drm_vblank_init() gets called with 0 CRTCs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-15-laurent.pinchart@ideasonboard.com
The driver attempts agressive power management by enabling and disabling
the AXI clock around register accesses. This results in attempts to
enable and disable the clock in the IRQ handler, which is a no-go as
preparing or unpreparing the clock may sleep.
On the other hand, the driver enables the AXI clock when enabling the
CRTC and keeps it enabled until the CRTC is disabled. This is correct,
and renders the power management attempt pointless, as interrupts are
not supposed to occur when the CRTC is off.
The same reasoning can be applied to the CRTC .enable_vblank() and
.disable_vblank() that are not supposed to be called when the CRTC off
and thus don't require manual handling of the AXI clock. Furthermore,
vblank handling is never enabled, which results in the vblank enable and
disable handlers never being called.
To fix this, remove the manual clock handling in the IRQ, the CRTC
.enable_vblank() and .disable_vblank() handlers and the plane
.atomic_update() handler. We however need to handle the clock manually
in mxsfb_irq_disable() as is calls .disable_vblank() manually and is
used both at probe and remove time.
The clock disabling is also moved to the last step of the
mxsfb_crtc_atomic_disable() function, to prepare for enabling vblank
handling.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-14-laurent.pinchart@ideasonboard.com
The vblank event is armed in the plane .atomic_update(). This works fine
as we have a single plane, and was the only option when the driver was
using the drm_simple_kms_helper helper, but will break as soon as
multiple planes are supported. Move it to CRTC .atomic_flush().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-13-laurent.pinchart@ideasonboard.com
The DRM simple display pipeline helper only supports a single plane. In
order to prepare for support of the alpha plane on i.MX6SX and i.MX7,
move away from the helper. No new feature is added.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-12-laurent.pinchart@ideasonboard.com
The mxsfb_crtc.c file doesn't handle just the CRTC, but also the other
KMS objects. Rename it accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-11-laurent.pinchart@ideasonboard.com
A fair number of includes are not needed. Drop them, and add a couple of
required includes that were included indirectly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-10-laurent.pinchart@ideasonboard.com
mxsfb_crtc.c defines several macros related to register addresses and
bit, which duplicates macros from mxsfb_regs.h. Use the macros from
mxsfb_regs.h instead and remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-9-laurent.pinchart@ideasonboard.com
The LCDC_CTRL register is located at address 0x0000. Some of the
accesses to the register simply use the mxsfb->base address. Reference
the LCDC_CTRL register explicitly instead to clarify the code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-8-laurent.pinchart@ideasonboard.com
The mxsfb_reset_block() function isn't special, pass it the
mxsfb_drm_private pointer instead of a pointer to the base address.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-7-laurent.pinchart@ideasonboard.com
Replace the convoluted way to set the format and bus width through
difficult to read macros with more explicit ones. Also remove the
outdated comment related to the limitations on bus width setting as it
doesn't apply anymore (the bus width can be specified through the
display_info bus format).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-6-laurent.pinchart@ideasonboard.com
mxsfb_regs.h defines macros related to register bits. Some of them are
not used and don't clearly map to any particular register, so their
purpose isn't known. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-5-laurent.pinchart@ideasonboard.com
Using BIT() is preferred over manual shifts as it's more readable,
handles the 1 << 31 case properly, and avoids other mistakes as shown by
the DEBUG0_HSYNC and DEBUG0_VSYNC bits (that are currently unused). Use
it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-4-laurent.pinchart@ideasonboard.com
Replace the manual connector implementation based on drm_panel with the
drm_panel_bridge helper. This simplifies the mxsfb driver by removing
connector-related code, and standardizing all pipeline control
operations on bridges.
A hack is needed to get hold of the connector, as that's our only source
of bus flags and formats for now. As soon as the bridge API provides us
with that information this can be fixed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-3-laurent.pinchart@ideasonboard.com
Commit 8e93f1028d ("drm/mxsfb: Use drm_fbdev_generic_setup()")
replaced fbdev handling with drm_fbdev_generic_setup() but left
inclusion of the drm/drm_fb_cma_helper.h header. Remove it.
Fixes: 8e93f1028d ("drm/mxsfb: Use drm_fbdev_generic_setup()")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727020654.8231-2-laurent.pinchart@ideasonboard.com
[Why]
All DCE6 specific code changes are guarded by CONFIG_DRM_AMD_DC_SI Kconfig option
[How]
(v1) CONFIG_DRM_AMD_DC_SI configuration option is added, default setting is disabled
(v2) Hainan is not supported, description updated accordingly
Tested with HD7750 (Cape Verde) and HD7950 (Tahiti)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
amdgpu_device.c requires changes for SI chipsets support
si.c require changes for Display Manager IP block enabling
[How]
amdgpu_device.c: add SI families in amdgpu_device_asic_has_dc_support()
si.c: changes in si_set_ip_blocks() for Display Manager IP blocks enablement
(v1) NOTE: As per Kaveri and older amdgpu.dc=1 kernel cmdline is required
(v2) fix for bc011f9350 ("drm/amdgpu: Change SI/CI gfx/sdma/smu init sequence")
remove CHIP_HAINAN support since it does not have physical DCE6 module
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can't pipeline that during eviction because the memory needs
to be available immediately.
v2: fix how we cleanup the BOs resources
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Alex Sierra <alex.sierra@amd.com>
Link: https://patchwork.freedesktop.org/patch/379039/
The newly added hexint helper is more convenient for bitmasks.
Before:
$ more /sys/module/amdgpu/parameters/ppfeaturemask
4294950911
After:
$ more /sys/module/amdgpu/parameters/ppfeaturemask
0xffffbfff
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/374724/
[Why]
DCE6 chipsets do not support HW rotation
[How]
rotation property is created for Bonaire and later
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With all DCE6 specific macros, register, masks in place
dce60_resource.c may use them and become independent from DCE8 headers
[How]
(v1) Changelog:
- use DCE6 headers for registers and masks, remove the DC8 headers
- remove 7th Display Controller/Encoder register instances (DCE6 has only 6)
- use DCE6 specific watermark programming registers (DPG_PIPE_ARBITRATION_CONTROL3)
- use DCE6 specific input pixel processing registers shift/mask
- use DCE6 specific transform registers shift/mask
- use DCE6 specific link encoder registers shift/mask
- use DCE6 specific output pixel processing registers shift/mask
- use DCE6 specific audio registers shift/mask
- use DCE6 specific dmcu registers shift/mask
- use DCE6 specific hwseq registers shift/mask
- use DCE6 specific mem input registers shift/mask
(v2) Changelog:
- use DCE6 ad hoc dce60_mem_input_construct() function
- use DCE6 ad hoc dce60_transform_construct() function
(v3) Changelog:
- use DCE6 ad hoc dce60_ipp_construct() function
(v4) Changelog:
- use DCE6 ad hoc dce60_link_encoder_construct() function
(v5) Changelog:
- use DCE6 ad hoc dce60_opp_construct() function
(v6) Changelog:
- use DCE6 ad hoc dce60_audio_create() function
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCE6 has CRTC_PREFETCH_EN bit in CRTC_CONTROL register
DCE6 has no CRTC_LEGACY_REQUESTOR_EN bit in CRTC_START_LINE_CONTROL register
DCE6 has no CRTC_CRC_CNTL register
[How]
Modify dce60_timing_generator_enable_advanced_request() function
Add dce60_configure_crc() function and dce60_is_tg_enabled() kept as static
Use dce60_configure_crc() function in dce60_tg_funcs
v2: remove unused variable (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
kernel WARNING due to use of .cursor_lock = dce_pipe_control_lock inherited by dce110
[How]
DCE6 set .cursor_lock = dce60_pipe_control_lock
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCE6 has no bottom_pipe and no Blender HW
DCE6 needs 'blank_target' set to false in order to turn on the display
DCE6 has a specific dce60_pipe_control_lock() fuction that is a no op
[How]
Add DCE6 specific functions with needed private dce60_* dependent fuctions
Comment DCE6 specific CTRC program visibility implementation
Fix a typo in the initial header includes comment 's/DCE8/DCE6/g'
Use dce60_apply_ctx_for_surface() in dce60_hw_sequencer_construct
Use dce60_pipe_control_lock() in dce60_hw_sequencer_construct
v2: add missing return type (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCE6 has specific SCL_HORZ_FILTER_INIT_{LUMA_RGB,CHROMA} registers
In DCE6 h_init_luma and h_init_chroma initialization is required
Some DCE6 specific SCL_{HORZ,VERT}_FILTER_CONTROL masks were not listed
[How]
Add the registers and masks in dce_transform.h
Add DCE6 specific struct sclh_ratios_inits in dce_transform.h
Add dce60_calculate_inits() function
Add dce60_program_scl_ratios_inits() function
Fix dce60_transform_set_scaler() function
v2: remove unused variable (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCE6 has no SCL_MODE and no SCL_{HORZ,VERT}_FILTER_INIT registers
DCE6 has no SCL_BOUNDARY_MODE bit in SCL_CONTROL register
DCE6 has Line Buffer programming registers (DC_LB_MEMORY_SPLIT,DC_LB_MEM_SIZE)
DCE6 DATA_FORMAT register has only INTERLEAVE_EN bit
DCE6 has no Out Clamp Control programming registers (OUT_CLAMP_CONTROL_*)
[How]
Add DCE6 specific macros definitions for XFM registers and masks
Add DCE6 specific registers to dce_transform_registers struct
Add DCE6 specific masks to dce_transform_mask struct
DCE6 XFM macros/structs changes will avoid buiding errors when using DCE6 headers
Add dce60_setup_scaling_configuration() w/o missing Scaling registers/bit programming
Add dce60_transform_set_scaler() using DCE6 Line Buffer programming registers
Add dce60_program_bit_depth_reduction() w/o Out Clamp Control programming
Add dce60_transform_set_pixel_storage_depth() use dce60_program_bit_depth_reduction()
Use dce60_transform_set_scaler() in dce60_transform_funcs
Use dce60_transform_set_pixel_storage_depth() in dce60_transform_funcs
Add DCE6 specific dce60_transform_construct
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCE6 has no FMT_TRUNCATE_MODE bit in FMT_BIT_DEPTH_CONTROL register
DCE6 has no FMT_CLAMP_COMPONENT_{R,G,B} registers
DCE6 has no FMT_SUBSAMPLING_{MODE,ORDER} bits in FMT_CONTROL register
[How]
Add DCE6 specific macros definitions for OPP registers and masks
DCE6 OPP macros will avoid buiding errors when using DCE6 headers
Add dce60_set_truncation() w/o FMT_TRUNCATE_MODE bit programming
Add dce60_opp_set_clamping() w/o Format Clamp Component programming
Add dce60_opp_program_fmt() w/o Format Subsampling bits programming
Add dce60_opp_program_bit_depth_reduction() with dce60_set_truncation
Use dce60_opp_program_fmt() in dce60_opp_funcs
Use dce60_opp_program_bit_depth_reduction() in dce60_opp_funcs
Add DCE6 specific dce60_opp_construct
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCE6 has DPG_PIPE_ARBITRATION_CONTROL3 register for Line Buffer watermark selection
DCE6 has STUTTER_EXIT_SELF_REFRESH_WATERMARK_MASK mask for Stutter watermark selection
DCE6 has NB_PSTATE_CHANGE_WATERMARK_MASK mask for North Bridge watermark selection
DCE6 has no GRPH_MICRO_TILE_MODE mask
DCE6 has no HW_ROTATION register
[How]
Add DCE6 specific macros definitions for MI registers and masks
Add DCE6 specific registers to dce_mem_input_registers struct
Add DCE6 specific masks to dce_mem_input_masks struct
DCE6 MI macros/structs changes will avoid buiding errors when using DCE6 headers
Add dce60_program_urgency_watermark() function
Add dce60_program_nbp_watermark() function
Add dce60_program_stutter_watermark() function
Add dce60_mi_program_display_marks() function w/ new DCE6 watermark programming
Add DCE6 specific tiling programming and modify DCE8 case
Add dce60_program_size() fuction w/o Rotation processing
Add dce60_mi_program_surface_config() fuction
Use dce60_mi_program_display_marks() in dce60_mi_funcs
Use dce60_mi_program_surface_config() in dce60_mi_funcs
Add DCE6 specific dce60_mem_input_construct
v2: remove unused variable (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCE6 has no DP_DPHY_SCRAM_CNTL register
[How]
Add DCE6 specific macros definitions for LE registers
DCE6 LE macros will avoid buiding errors when using DCE6 headers
Add dce60_set_dp_phy_pattern_hbr2_compliance_cp2520_2() w/o Scramble Control programming
Add dce60_set_dp_phy_pattern_passthrough_mode() w/o Scramble Control programming
Add dce60_configure_encoder() w/o Scramble Control programming
Add dce60_link_encoder_enable_dp_output() w/ dce60_configure_encoder
Add dce60_link_encoder_enable_dp_mst_output() w/ dce60_configure_encoder
Add dce60_link_encoder_dp_set_phy_pattern() w/ dce60_set_dp_phy_pattern_passthrough_mode
Use dce60_link_encoder_enable_dp_output() in dce60_lnk_enc_funcs
Use dce60_link_encoder_enable_dp_mst_output() in dce60_lnk_enc_funcs
Use dce60_link_encoder_dp_set_phy_pattern() in dce60_lnk_enc_funcs
Add DCE6 specific dce60_link_encoder_construct
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCE6 does not have CURSOR2_DEGAMMA_MODE bit in DEGAMMA_CONTROL register
[How]
Add DCE6 specific macros definitions for IPP masks
DCE6 IPP macros will avoid buiding errors when using DCE6 headers
Add dce60_ipp_set_degamma() function w/o Cursor2 Degamma programming
Use dce60_ipp_set_degamma() in ipp_funcs dce60_ipp_funcs
Add DCE6 specific dce60_ipp_construct
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCE6 has no BLND_CONTROL register for Blender HW programming
DCE6 has no BLND_V_UPDATE_LOCK register for Pipe Locking
[How]
Add DCE6 specific macros definitions for HWSEQ registers and masks
DCE6 HWSEQ macros will avoid buiding errors when using DCE6 headers
Add dce60_pipe_control_lock() stub with no op
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCE6 has no SMU_INTERRUPT_CONTROL register, but it's used for DCN10 and later
[How]
Add DCE6 specific macros definitions for DMCU registers and masks
DCE6 DMCU macros will avoid buiding errors when using DCE6 headers
There is no other change needed in dce_dcmu
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCE6 has no DCCG_AUDIO_DTO2_USE_512FBR_DTO mask in DCCG_AUDIO_DTO_SOURCE register
[How]
Add DCE6 specific macros definitions for AUD masks
DCE6 AUD macros will avoid buiding errors when using DCE6 headers
Add dce60_aud_wall_dto_setup() w/o 512*Fs programming
Use dce60_aud_wall_dto_setup() in dce60_funcs
Add DCE specific dce60_audio_create
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Issue in the Mouse cursor size in Linux Desktop Environments
[How]
In DCE6 dc->caps.max_cursor_size need to be set as 64 instead of 128
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(v1) Changelog
[Why]
After commit c69dd2d "drm/amd/display: Refactor clk_mgr functions"
dc/clk_mgr requires these changes to add SI parts support
Necessary to avoid hitting default: ASSERT(0); /* Unknown Asic */
that would cause kernel freeze
[How]
Add case statement for FAMILY_SI chipsets
(v2) Changelog
[Why]
DCE6 has no DPREFCLK_CNTL register
[How]
Add DCE6 specific macros definitions for CLK registers and masks
Add DCE6 specific dce60/dce60_clk_mgr.c for DCE6 customization
Code style: reuse all the public functions in dce100/dce_clk_mgr.h header
Code style: use dce60_* static functions as per other DCE implementations
Add dce60_get_dp_ref_freq_khz() w/o using DPREFCLK_CNTL register
Use dce60_get_dp_ref_freq_khz() function in dce60_funcs
Add DCE6 specific dce60_clk_mgr_construct
dc/clk_mgr/dce_clk_mgr.c: use dce60_clk_mgr_construct for FAMILY_SI chipsets
Add Makefile rules for dce60_clk_mgr.o target conditional to CONFIG_DRM_AMD_DC_SI
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
amdgpu_dm.c requires changes for SI chipsets init and irq handlers registration
[How]
SI support: load_dmcu_fw(), amdgpu_dm_initialize_drm_device(), dm_early_init()
Add DCE6 specific dce60_register_irq_handlers() function
(v1) NOTE: As per Kaveri and older amdgpu.dc=1 kernel cmdline is required
(v2) fix for bc011f9 ("drm/amdgpu: Change SI/CI gfx/sdma/smu init sequence")
remove CHIP_HAINAN support since it does not have physical DCE6 module
(v3) fix vblank irq support for DCE6 using ad hoc dce60_register_irq_handlers()
replicating for vblank irq the behavior of dce110_register_irq_handlers()
as per commit b57de80 ("drm/amd/display: Register on VLBLANK ISR.")
(v4) updated due to following kernel 5.2 commit:
b2fddb13 ("drm/amd/display: Drop underlay plane support")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
irq service requires changes for DCE6 support
[How]
(v1) DCE6 targets are added replicating existing DCE8 implementation.
due to missing CRTC_VERTICAL_INTERRUPT0_CONTROL registers/masks,
dce/dce_8_0_{d,sh_mask}.h used instead of dce/dce_6_0_{d,sh_mask}.h
(v2) DCE6 headers used adding the necessary vblank irq registers
(INT_MASK and VBLANK_STATUS) and vblank irq masks as implemented
in amdgpu driver.
Add vblank_irq_info_funcs_dce60 with .set and .ack as per commit
b10d51f ("drm/amd/display: Add interrupt entries for VBLANK isr.")
and use it in vblank_int_entry(reg_num) macro definition
(v3) updated due to following kernel 5.3 commit:
4fc4dca ("drm/amd: drop use of drmp.h in os_types.h")
(v4) updated due to following kernel 5.6 commit:
d9e3267 ("drm/amd/display: cleanup of construct and destruct funcs")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
hw_factory.c requires changes for DCE6 support
[How]
DCE6 targets added replicating and adapting existing DCE8 implementation.
(v2) changes due to following commit:
91db931 ("drm/amd/display: refactor gpio to allocate hw_container in constructor")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
command_table_helper.c requires changes for DCE6 support
[How]
DCE6 targets added replicating and adapting the existing DCE8 implementation.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
resource_parse_asic_id() and dc_create_resource_pool() are missing SI/DCE6 cases
[How]
SI/DCE6 cases support added using existing DCE8 implementation as a reference
(v2) updated due to following kernel 5.2 commit:
d9673c9 ("drm/amd/display: Pass init_data into DCN resource creation")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCE6 chipsets have a lot in common with DCE8, let's start from this
[How]
DCE6 targets are added replicating existing DCE8 implementation.
NOTE: dce_8_0_{d,sh_mask}.h headers used instead of dce_6_0_{d,sh_mask}.h
initial build prototype due to missing DCE6 macros/registers/masks
DCE6 specific macros/registers/masks will be added with later commits
(v2b) removed dce_version cases in dc/dce/dce_clock_source.c and
updated dce60 due to following kernel 5.0 commits:
24f7dd7 ("drm/amd/display: move pplib/smu notification to dccg block")
9566b67 ("drm/amd/display: remove safe_to_lower flag from dc, use 2 functions instead")
4244381 ("drm/amd/display: clean up base dccg struct")
4c5e8b5 ("drm/amd/display: split dccg clock manager into asic folders")
84e7fc0 ("drm/amd/display: rename dccg to clk_mgr")
77f6916 ("drm/amd/display: Remove duplicate header")
9f7ddbe ("drm/amd/display: fix optimize_bandwidth func pointer for dce80")
4ece61a ("drm/amd/display: set clocks to 0 on suspend on dce80")
(v3b) updated dce60 due to following kernel 5.1 commits:
380604e ("drm/amd/display: Use 100 Hz precision for pipe pixel clocks")
32e6136 ("drm/amd/display: Fix 64-bit division for 32-bit builds")
1877ccf ("drm/amd/display: Change from aux_engine to dce_aux")
c69dffa ("drm/amd/display: fix eDP fast bootup for pre-raven asic")
(v4b) updated dce60 due to following kernel 5.2 commits:
e5c4197 ("drm/amd/display: Add plane capabilities to dc_caps")
813d20d ("drm/amd/display: Fix multi-thread writing to 1 state")
ea36ad3 ("drm/amd/display: expand plane caps to include fp16 and scaling capability")
afcd526 ("drm/amd/display: Add fast_validate parameter")
(v5b) updated dce60 due to following kernel 5.3 commits:
e7e10c4 ("drm/amd/display: stop external access to internal optc sync params")
78cc70b ("drm/amd/display: Engine-specific encoder allocation")
dc88b4a ("drm/amd/display: make clk mgr soc specific")
4fc4dca ("drm/amd: drop use of drmp.h in os_types.h")
(v6b) updated dce60 due to following kernel 5.4 commits:
54a9bcb ("drm/amd/display: Fix a typo - dce_aduio_mask --> dce_audio_mask")
9adc805 ("drm/amd/display: make firmware info only load once during dc_bios create")
(v7b) updated dce60 due to following kernel 5.5 commits:
cabe144 ("drm/amd/display: memory leak")
8276dd8 ("drm/amd/display: update register field access mechanism")
f6040a4 ("drm/amd/display: configurable aux timeout support")
bf7f5ac ("drm/amd/display: map TRANSMITTER_UNIPHY_x to LINK_REGS_x")
(v8b) updated dce60 due to following kernel 5.6 commits:
d9e3267 ("drm/amd/display: cleanup of construct and destruct funcs")
f42ea55 ("drm/amd/display: add separate of private hwss functions")
(v9b) updated dce60 due to following kernel 5.8 commits:
bba8289 ("drm/amd/display: code clean up in dce80_hw_sequencer.c")
904fb6e ("drm/amd/display: move panel power seq to new panel struct")
d4caa72 ("drm/amd/display: change from panel to panel cntl")
(v10) Fix up PLL handling for DCE6:
DCE6.0 supports 2 PLLs. DCE6.1 supports 3 PLLs. (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Asic info for SI parts need to be preliminarly added
[How]
Asics info retrieved from si_id.h in https://github.com/GPUOpen-Tools/CodeXL
Tree path:
./CodeXL/Components/ShaderAnalyzer/AMDTBackEnd/Include/Common/asic_reg/si_id.h
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
To help with the DC port.
v2: add missing masks, add additional registers
v3: more updates
v4: fix accidently dropped changes
v5: add missing nb pstate mask
v6: add vblank, vline masks
v7: add SCL_HORZ_FILTER_INIT regs
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These tables have _COUNT number of elements so the comparisons should be
>= instead of > to prevent reading one element beyond the end of the
array.
Fixes: 8264ee69f0 ("drm/amd/powerplay: drop unused code")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid a memset after a call to 'dma_alloc_coherent()'.
This is useless since
commit 518a2f1925 ("dma-mapping: zero memory returned from dma_alloc_*")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use DCN21 functions instead of DCE110
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently navy_flounder is using sienna_cichlid_dmcub.bin.
[How]
Create a seperate define so navy_flounder will use its own firmware.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some monitors could suffer symbol unlock but cannot send HPD IRQ to
notic source device to handle link loss. This makes monitor stuck in
abnormal status and causes black screen.
[How]
According to the suggestion from scalar vendor, to check lane status
again after link training done. That can improve the comaptibility
from current production monitors.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In dcn3_update_clocks there are situations where dppclk is not
lowered (i.e. stays the same), but DTO still needs to be increased
before we program pipe frontend (i.e. in prepare_bandwidth). If we
don't program the new DTO value before we program the pipe,
we will underflow as soon as the pipe lock is released until the
next call to dcn3_update_clocks where the DTO is updated.
[How]
Remove dppclk check before programming new DTO value.
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Fix naming and return bits rather than bytes per pixel for
naming consistency. Because registers return Bytes per pixel,
but DSC Config structure is expecting bits per pixel as input.
So when returning the value convert from bytes into bits.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Struct dcn_dsc_state is used for reading current state
and parameters of DSC on a pipe, the target rate parameter
uses bytes per pixel even though its reading BITS_PER_PIXEL
register.
[How]
Changing it to Bits Per Pixel for consistency.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This change replaces older looping code in favor of these functions.
[How]
There are built in functions for extracting global sync params
during mode validation now.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. allow asic to handle sensor type by itself.
2. if not, use smu common sensor to handle it.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
added support for umc 8.7 error reporting and query
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update sienna_cichlid driver if header and related files.
Support new smu metrics for pre & postDS frequency.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the change introduces IP headers for unified memory controller (umc)
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current outputs of amdgpu_pm_info debugfs come with clock gating
status and followed by current clock/power information. However the
clock gating status retrieving may pull GFX out of CG status. That
will make the succeeding clock/power information retrieving inaccurate.
To overcome this and be with minimum impact, the outputs are updated
to show current clock/power information first.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 058c07201ec7d373fc6a0a570b38a8a9d62c29fb.
Chip NAVY_FLOUNDER uses vcn3.0, but it has only one VCN instance.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
s_barrier triggers a debug exception when issued with PRIV=1,
DEBUG_EN=1. This causes spurious notifications to rocm-gdb.
Clear MODE before issuing s_barrier and restore MODE afterwards
in the context restore handler.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Tested-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Take back patch:drop unnecessary message support check
Because the gpu reset fail problem on renoir can be fixed by:
drm/amd/powerplay: skip invalid msg when smu set mp1 state
It needs to remove SWSMU_CODE_LAYER_L1 in smu_cmn.h to guard a clear
code layer.
Signed-off-by: changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for reporting thermal throttling events through SMI.
Also, add a counter to count the number of throttling interrupts
observed and report the count in the SMI event message.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when GPU hang, driver has multi-paths to enter amdgpu_device_gpu_recover,
the atomic adev->in_gpu_reset and hive->in_reset are used to avoid
re-entering GPU recovery.
During GPU reset and resume, it is unsafe that other threads access GPU,
which maybe cause GPU reset failed. Therefore the new rw_semaphore
adev->reset_sem is introduced, which protect GPU from being accessed by
external threads during recovery.
v2:
1. add rwlock for some ioctls, debugfs and file-close function.
2. change to use dqm->is_resetting and dqm_lock for protection in kfd
driver.
3. remove try_lock and change adev->in_gpu_reset as atomic, to avoid
re-enter GPU recovery for the same GPU hang.
v3:
1. change back to use adev->reset_sem to protect kfd callback
functions, because dqm_lock couldn't protect all codes, for example:
free_mqd must be called outside of dqm_lock;
[ 1230.176199] Hardware name: Supermicro SYS-7049GP-TRT/X11DPG-QT, BIOS 3.1 05/23/2019
[ 1230.177221] Call Trace:
[ 1230.178249] dump_stack+0x98/0xd5
[ 1230.179443] amdgpu_virt_kiq_reg_write_reg_wait+0x181/0x190 [amdgpu]
[ 1230.180673] gmc_v9_0_flush_gpu_tlb+0xcc/0x310 [amdgpu]
[ 1230.181882] amdgpu_gart_unbind+0xa9/0xe0 [amdgpu]
[ 1230.183098] amdgpu_ttm_backend_unbind+0x46/0x180 [amdgpu]
[ 1230.184239] ? ttm_bo_put+0x171/0x5f0 [ttm]
[ 1230.185394] ttm_tt_unbind+0x21/0x40 [ttm]
[ 1230.186558] ttm_tt_destroy.part.12+0x12/0x60 [ttm]
[ 1230.187707] ttm_tt_destroy+0x13/0x20 [ttm]
[ 1230.188832] ttm_bo_cleanup_memtype_use+0x36/0x80 [ttm]
[ 1230.189979] ttm_bo_put+0x1be/0x5f0 [ttm]
[ 1230.191230] amdgpu_bo_unref+0x1e/0x30 [amdgpu]
[ 1230.192522] amdgpu_amdkfd_free_gtt_mem+0xaf/0x140 [amdgpu]
[ 1230.193833] free_mqd+0x25/0x40 [amdgpu]
[ 1230.195143] destroy_queue_cpsch+0x1a7/0x270 [amdgpu]
[ 1230.196475] pqm_destroy_queue+0x105/0x260 [amdgpu]
[ 1230.197819] kfd_ioctl_destroy_queue+0x37/0x70 [amdgpu]
[ 1230.199154] kfd_ioctl+0x277/0x500 [amdgpu]
[ 1230.200458] ? kfd_ioctl_get_clock_counters+0x60/0x60 [amdgpu]
[ 1230.201656] ? tomoyo_file_ioctl+0x19/0x20
[ 1230.202831] ksys_ioctl+0x98/0xb0
[ 1230.204004] __x64_sys_ioctl+0x1a/0x20
[ 1230.205174] do_syscall_64+0x5f/0x250
[ 1230.206339] entry_SYSCALL_64_after_hwframe+0x49/0xbe
2. remove try_lock and introduce atomic hive->in_reset, to avoid
re-enter GPU recovery.
v4:
1. remove an unnecessary whitespace change in kfd_chardev.c
2. remove comment codes in amdgpu_device.c
3. add more detailed comment in commit message
4. define a wrap function amdgpu_in_reset
v5:
1. Fix some style issues.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com>
Suggested-by: Luben Tukov <luben.tuikov@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable result is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vcn ip block is already selected based on ASIC type during set_ip_blocks.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
jpeg ip block is already selected based on ASIC type during set_ip_blocks.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some padding before the MODE register in the HWREGs block to
preserve the same layout as gfx9. This simplifies implementation of a
user-mode debugger.
Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vcn ip block is already selected based on ASIC type during set_ip_blocks
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
jpeg ip block is already selected based on ASIC type during set_ip_blocks.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A use-after-free in drm_gem_open_ioctl can happen if the
GEM object handle is closed between the idr lookup and
retrieving the size from said object since a local reference
is not being held at that point. Hold the local reference
while the object can still be accessed to fix this and
plug the potential security hole.
Signed-off-by: Steve Cohen <cohens@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1595284250-31580-1-git-send-email-cohens@codeaurora.org
The function mipi_dbi_spi1_transfer() will transfer its payload as 9-bit
data, the 9th (MSB) bit being the data/command bit. In order to do that,
it unpacks the 8-bit values into 16-bit values, then sets the 9th bit if
the byte corresponds to data, clears it otherwise. The 7 MSB are
padding. The array of now 16-bit values is then passed to the SPI core
for transfer.
This function was broken since its introduction, as the length of the
SPI transfer was set to the payload size before its conversion, but the
payload doubled in size due to the 8-bit -> 16-bit conversion.
Fixes: 02dd95fe31 ("drm/tinydrm: Add MIPI DBI support")
Cc: <stable@vger.kernel.org> # 5.4+
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703141341.1266263-1-paul@crapouillou.net
Prepare the bridge driver for use in a chained setup.
- Replacing direct use of drm_panel with drm_panel_bridge support.
- Make the connector creation optional
Note: the bridge panel will use the connector type from the panel.
v3:
- Fix wrong logic in connector creation (Laurent)
v2:
- Use panel_bridge for local variable name to align with other drivers
- Fix that connector was created twice (Laurent)
- Set bridge.type to DRM_MODE_CONNECTOR_LVDS.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727170320.959777-6-sam@ravnborg.org
Add the get_edid() bridge operation to prepare for
use as a chained bridge.
Add helper function that is also used by the connector.
v2:
- Fix memory leak (Laurent)
- Do not save a copy of edid, read it when needed
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727170320.959777-5-sam@ravnborg.org
With the bridge operations implemented the last step to prepare
this driver for a chained setup is the use of the bridge panel driver.
The bridge panel driver is only used when a port@2 is present in
the DT. So when the display driver requests a connector
support both situations:
- connector created by bridge panel driver
- connector created by this driver
And on top, support that the display driver creates the connector,
which is the preferred setup.
Note: the bridge panel will use the connector type from the panel.
v3:
- Fix wrong logic in connector creation (Laurent)
v2:
- Merge connector and drm_panel_bridge patches
and fix so we do not create two connectors (Laurent)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727170320.959777-4-sam@ravnborg.org
Prepare the bridge driver for chained operation by adding
support for the detect operation.
v3:
- Fix code to make it readable (Laurent)
v2:
- Do not announce detect operation if there is no hpd pin (Laurent)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200727170320.959777-2-sam@ravnborg.org
Make the connector creation optional to enable usage of the
megachips-stdpxxxx-ge-b850v3-fw bridge with the DRM bridge connector
helper.
v2:
- Set bridge.type to DRM_MODE_CONNECTOR_DisplayPort
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Peter Senna Tschudin <peter.senna@gmail.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-14-sam@ravnborg.org
To prepare for a chained bridge setup add support for the
get_edid bridge operation.
There is no need for a copy of the edid - so drop
the pointer to the copy.
v2:
- Fix so we do not leak memory (Laurent)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Peter Senna Tschudin <peter.senna@gmail.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-13-sam@ravnborg.org
To prepare for use in a chained bridge setup enable the
detect operation.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Peter Senna Tschudin <peter.senna@gmail.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-12-sam@ravnborg.org
Fix so drm_device is read from the bridge.
This is a preparation for the connector being optional.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Peter Senna Tschudin <peter.senna@gmail.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-11-sam@ravnborg.org
Prepare the bridge driver for use in a chained setup by
replacing direct use of drm_panel with drm_panel_bridge support.
The connecter is now either created by the panel bridge or the display
driver. So all code for connector creation in this driver is no longer
relevant and thus dropped.
The connector code had some special polling handling:
connector.polled = DRM_CONNECTOR_POLL_HPD;
drm_helper_hpd_irq_event(ps8622->bridge.dev);
This code was most likely added to speed up detection of the connector.
If really needed then this functionality belongs somewhere else.
Note: the bridge panel will use the connector type from the panel.
v2:
- Fix to avoid creating connector twice (Laurent)
- Drop all connector code - defer to bridge panel
- Use panel_bridge for local variable to align with other drivers
- Set bridge.type to DRM_MODE_CONNECTOR_LVDS;
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-9-sam@ravnborg.org
Prepare the tc358764 bridge driver for use in a chained setup by
replacing direct use of drm_panel with drm_panel_bridge support.
The bridge panel will use the connector type reported by the panel,
where the connector for this driver hardcodes DRM_MODE_CONNECTOR_LVDS.
The tc358764 did not add any additional info the the connector so the
connector creation is passed to the bridge panel driver.
v3:
- Merge with patch to make connector creation optional to avoid
creating two connectors (Laurent)
- Pass connector creation to bridge panel, as this bridge driver
did not add any extra info to the connector.
- Set bridge.type to DRM_MODE_CONNECTOR_LVDS.
v2:
- Use PTR_ERR_OR_ZERO() (kbuild test robot)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: kbuild test robot <lkp@intel.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-5-sam@ravnborg.org
Drop drm_connector handling that is not needed:
- drm_dev_register() in the display controller driver takes
care of registering connectors.
So the call to drm_connector_register() call is not needed in the bridge
driver.
- Use of drm_connector_unregister() is only required for drivers that
explicit have called drm_dev_register.
- The reference counting using drm_connector_put() is likewise not needed.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-4-sam@ravnborg.org
All panels shall report a connector type.
panel-simple has a lot of panels with no connector_type,
and for these fall back to DPI as the default.
v2:
- Rebased on top of validation of panel description
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-3-sam@ravnborg.org
Warn if we detect a panel with incomplete/wrong description.
This is inspired by a similar patch by Laurent that introduced checks
for LVDS panels - this extends the checks to the remaining type of
connectors.
This is known to warn for some of the existing panels but added
despite this as we need help from people using the panels to
add the missing info.
The checks are not complete but will catch the most common mistakes.
The checks at the same time serve as documentation for the minimum
required description for a panel.
The checks uses dev_warn() as we know this will hit. WARN() was
too noisy at the moment for anything else than LVDS.
v3:
- %d => %u for bpc (Laurent)
v2:
- Use dev_warn (Laurent)
- Check for empty bus_flags
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200726203324.3722593-2-sam@ravnborg.org
Recent kernels have been reported to panic using the bochs_drm
framebuffer under qemu-system-sparc64 which was bisected to
commit 7a0483ac4f ("drm/bochs: switch to generic drm fbdev emulation").
The backtrace indicates that the shadow framebuffer copy in
drm_fb_helper_dirty_blit_real() is trying to access the real
framebuffer using a virtual address rather than use an IO access
typically implemented using a physical (ASI_PHYS) access on SPARC.
The fix is to replace the memcpy with memcpy_toio() from io.h.
memcpy_toio() uses writeb() where the original fbdev code
used sbus_memcpy_toio(). The latter uses sbus_writeb().
The difference between writeb() and sbus_memcpy_toio() is
that writeb() writes bytes in little-endian, where sbus_writeb() writes
bytes in big-endian. As endian does not matter for byte writes they are
the same. So we can safely use memcpy_toio() here.
Note that this only fixes bochs, in general fbdev helpers still have
issues with mixing up system memory and __iomem space. Fixing that will
require a lot more work.
v3:
- Improved changelog (Daniel)
- Added FIXME to fbdev_use_iomem (Daniel)
v2:
- Added missing __iomem cast (kernel test robot)
- Made changelog readable and fix typos (Mark)
- Add flag to select iomem - and set it in the bochs driver
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200709193016.291267-1-sam@ravnborg.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200725191012.GA434957@ravnborg.org
A couple of fixes for issues relating to format modifiers (there's
still a patch pending from James Jones to hopefully address the
remaining ones), regression fix from the recent HDA nightmare, and a
race fix for Turing modesetting.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5aAp+FZMZGTB+Nszc==h5gEbdNV58sSRRQDF1R5qQRGg@mail.gmail.com
Whenever a display update was sent, apart from updating
the memory base address, we called mcde_display_send_one_frame()
which also sent a command to the display requesting the TE IRQ
and enabling the FIFO.
When continuous updates are running this is wrong: we need
to only send this to start the flow to the display on
the very first update. This lead to the display pipeline
locking up and crashing.
Check if the flow is already running and in that case
do not call mcde_display_send_one_frame().
This fixes crashes on the Samsung GT-S7710 (Skomer).
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Stephan Gerhold <stephan@gerhold.net>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200718233323.3407670-1-linus.walleij@linaro.org
The boe,hv070wsa-100 panel is a LVDS panel.
Fix connector type to reflect this.
With this change users of this panel do not have to specify the
connector type.
v4:
- Add .bpc = 4 (Laurent)
v3:
- Drop PIXDATA bus_flag, not relevant
v2:
- Add .bus_format (Laurent)
- Add .bus_flags
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703192417.372164-2-sam@ravnborg.org
On boe_nv133fhm_n62 (and presumably on boe_nv133fhm_n61) a scope shows
a small spike on the HPD line right when you power the panel on. The
picture looks something like this:
+--------------------------------------
|
|
|
Power ---+
+---
|
++ |
+----+| |
HPD -----+ +---------------------------+
So right when power is applied there's a little bump in HPD and then
there's small spike right before it goes low. The total time of the
little bump plus the spike was measured on one panel as being 8 ms
long. The total time for the HPD to go high on the same panel was
51.2 ms, though the datasheet only promises it is < 200 ms.
When asked about this glitch, BOE indicated that it was expected and
persisted until the TCON has been initialized.
If this was a real hotpluggable DP panel then this wouldn't matter a
whole lot. We'd debounce the HPD signal for a really long time and so
the little blip wouldn't hurt. However, this is not a hotpluggable DP
panel and the the debouncing logic isn't needed and just shows down
the time needed to get the display working. This is why the code in
panel_simple_prepare() doesn't do debouncing and just waits for HPD to
go high once. Unfortunately if we get unlucky and happen to poll the
HPD line right at the spike we can try talking to the panel before
it's ready.
Let's handle this situation by putting in a 15 ms prepare delay and
decreasing the "hpd absent delay" by 15 ms. That means:
* If you don't have HPD hooked up at all you've still got the
hardcoded 200 ms delay.
* If you've got HPD hooked up you will always wait at least 15 ms
before checking HPD. The only case where this could be bad is if
the panel is sharing a voltage rail with something else in the
system and was already turned on long before the panel came up. In
such a case we'll be delaying 15 ms for no reason, but it's not a
huge delay and I don't see any other good solution to handle that
case.
Even though the delay was measured as 8 ms, 15 ms was chosen to give a
bit of margin.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716132120.1.I01e738cd469b61fc9b28b3ef1c6541a4f48b11bf@changeid
After the drm_bridge_connector_init() helper function has been added,
the ADV driver has been changed accordingly. However, the 'type'
field of the bridge structure was left unset, which makes the helper
function always return -EINVAL.
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Vinod Koul <vkoul@kernel.org> # tested on DragonBoard 410c
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720124228.12552-1-laurentiu.palcu@oss.nxp.com
Lontium Lt9611 is a DSI to HDMI bridge which supports two DSI ports and
I2S port as an input and HDMI port as output
Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> # fix lt9611_bridge_mode_valid
Link: https://patchwork.freedesktop.org/patch/msgid/20200723163442.1280414-4-vkoul@kernel.org
The first member of drm_display_mode is no longer a structure, but
the code is still using {{0}} to zero initialize it. Make that just
{} so it works regardless of what lies inside.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fixes: 42acb06b01 ("drm: pahole struct drm_display_mode")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200724190718.23567-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch.ch>
Now the ARM page tables are always allocated by GFP_ATOMIC parameter,
but the iommu_ops->map() function has been added a gfp_t parameter by
commit 781ca2de89 ("iommu: Add gfp parameter to iommu_ops::map"),
thus io_pgtable_ops->map() should use the gfp parameter passed from
iommu_ops->map() to allocate page pages, which can avoid wasting the
memory allocators atomic pools for some non-atomic contexts.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/3093df4cb95497aaf713fca623ce4ecebb197c2e.1591930156.git.baolin.wang@linux.alibaba.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Looks like I made the mistake of forgetting to check whether or not this
would build without CONFIG_DEBUG_FS, as the Kbuild bot reported some
issues building with tegra_defconfig:
In file included from drivers/gpu/drm/nouveau/nouveau_display.c:47:
./drivers/gpu/drm/nouveau/dispnv50/crc.h: In function
‘nv50_head_crc_late_register’:
./drivers/gpu/drm/nouveau/dispnv50/crc.h:106:47: error: parameter name
omitted
106 | static inline int nv50_head_crc_late_register(struct nv50_head *) {}
| ^~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h:106:54: warning: no return
statement in function returning non-void [-Wreturn-type]
106 | static inline int nv50_head_crc_late_register(struct nv50_head *) {}
| ^~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h: In function
‘nv50_crc_handle_vblank’:
./drivers/gpu/drm/nouveau/dispnv50/crc.h:108:57: warning: ‘return’ with
a value, in function returning void [-Wreturn-type]
108 | nv50_crc_handle_vblank(struct nv50_head *head) { return 0; }
| ^
./drivers/gpu/drm/nouveau/dispnv50/crc.h:108:1: note: declared here
108 | nv50_crc_handle_vblank(struct nv50_head *head) { return 0; }
| ^~~~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h: In function
‘nv50_crc_atomic_check’:
./drivers/gpu/drm/nouveau/dispnv50/crc.h:111:23: error: parameter name
omitted
111 | nv50_crc_atomic_check(struct nv50_head *, struct nv50_head_atom *,
| ^~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h:111:43: error: parameter name
omitted
111 | nv50_crc_atomic_check(struct nv50_head *, struct nv50_head_atom *,
| ^~~~~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h:112:9: error: parameter name
omitted
112 | struct nv50_head_atom *) {}
| ^~~~~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h:112:16: warning: no return
statement in function returning non-void [-Wreturn-type]
112 | struct nv50_head_atom *) {}
| ^~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h: In function
‘nv50_crc_atomic_stop_reporting’:
./drivers/gpu/drm/nouveau/dispnv50/crc.h:114:32: error: parameter name
omitted
114 | nv50_crc_atomic_stop_reporting(struct drm_atomic_state *) {}
| ^~~~~~~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h: In function
‘nv50_crc_atomic_prepare_notifier_contexts’:
./drivers/gpu/drm/nouveau/dispnv50/crc.h:116:43: error: parameter name
omitted
116 | nv50_crc_atomic_prepare_notifier_contexts(struct drm_atomic_state *) {}
| ^~~~~~~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h: In function
‘nv50_crc_atomic_start_reporting’:
./drivers/gpu/drm/nouveau/dispnv50/crc.h:118:33: error: parameter name
omitted
118 | nv50_crc_atomic_start_reporting(struct drm_atomic_state *) {}
| ^~~~~~~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h: In function
‘nv50_crc_atomic_set’:
./drivers/gpu/drm/nouveau/dispnv50/crc.h:120:21: error: parameter name
omitted
120 | nv50_crc_atomic_set(struct nv50_head *, struct nv50_head_atom *) {}
| ^~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h:120:41: error: parameter name
omitted
120 | nv50_crc_atomic_set(struct nv50_head *, struct nv50_head_atom *) {}
| ^~~~~~~~~~~~~~~~~~~~~~~
./drivers/gpu/drm/nouveau/dispnv50/crc.h: In function
‘nv50_crc_atomic_clr’:
./drivers/gpu/drm/nouveau/dispnv50/crc.h:122:21: error: parameter name
omitted
122 | nv50_crc_atomic_clr(struct nv50_head *) {}
| ^~~~~~~~~~~~~~~~~~
drivers/gpu/drm/nouveau/nouveau_display.c: In function
‘nouveau_framebuffer_new’:
drivers/gpu/drm/nouveau/nouveau_display.c:286:15: warning: variable
‘width’ set but not used [-Wunused-but-set-variable]
286 | unsigned int width, height, i;
| ^~~~~
So, fix the inline function declarations we use in
drm/drivers/gpu/drm/nouveau/dispnv50/crc.h when CONFIG_DEBUG_FS is
enabled.
Fixes: 12885ecbfe ("drm/nouveau/kms/nvd9-: Add CRC support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We had a, what was supposed to be temporary, hack in the KMS code where we'd
completely drain an EVO/NVD channel's push buffer when wrapping to the start
again, instead of treating it as a ring buffer.
Let's fix that, finally.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This commit pulls in a bunch of new push buffer macros which are able to
support NVIDIA's class headers, and provide more useful debug output and
error checking (compile-time, where possible) than we had previously.
Will incrementally transition each function over to the unified interfaces.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
The nvif_object_ioctl() method NVIF_VMM_V0_PFNMAP wasn't correctly
setting the hardware specific GPU page table entries for 2MB sized
pages. Fix this by adding functions to set and clear PD0 GPU page
table entries.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The function nvkm_vmm_ctor() is not called outside of the file defining
it, so make it static.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nouveau_debugfs_strap_peek() calls pm_runtime_get_sync() that
increments the reference count. In case of failure, decrement the
ref count before returning the error.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nouveau_connector_detect() calls pm_runtime_get_sync and in turn
increments the reference count. In case of failure, decrement the
ref count before returning the error.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nv50_disp_atomic_commit() calls calls pm_runtime_get_sync and in turn
increments the reference count. In case of failure, decrement the
ref count before returning the error.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
ref count before returning the error.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nouveau_fbcon_open() calls calls pm_runtime_get_sync() that
increments the reference count. In case of failure, decrement the
ref count before returning the error.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It technically loads, and runs, but is ultimately pointless outside of
a very narrow window (fanless systems where one wants to attempt using
the, broken for a lot of gm20x, memory reclocking code).
It's also potentially dangerous to override the VBIOS-provided "Pre-OS"
PMU, which would be responsible for fan control otherwise.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This will prevent some pain with broken firmware trees, as under some
circumstances the HSFW can fail and leave the GPU in a state we don't
know how to recover from.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This will prevent reloading of HS FW where it's pointless, and bypass
hitting some timeouts.
Not a situation one should generally hit, but can occur with a messed
up firmware installation.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is less than useful with some subdevs having _nofw variants in their
FWIF lists - it's cleaner to handle them all in the same way.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This causes us to invalidate MMU only at the level we made modifications -
ie: if we've only modified PTEs, there's no need to have MMU dump the PDs
it's fetched into L2.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Rename all structures that are used directly by firmware to have a nvfw_
prefix.
This makes it easier to identify structures that have a fixed, specific
layout. A future patch will define several more such structures, so it's
important to be consistent now.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nvkm_timer_wait_init() takes a u64 as a duration parameter, but the
expression "(m) * 1000" will be promoted only to a 32-bit integer,
if 'm' is also an integer. Changing the 1000 to 1000ULL ensures that
the expression will be 64 bits.
This change currently has no effect as there are no callers of
nvkm_msec() that exceed 2000ms.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The disp015x classes are used by both gt21x and gf1xx (aside from gf119), but page
kinds differ between Tesla and Fermi.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-----BEGIN PGP SIGNATURE-----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=C3jr
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.9' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 5.9
This include converting mtk_dsi to drm_bridge API.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716233102.566-1-chunkuang.hu@kernel.org
This set of patches contains a few preparatory patches to enable video
capture support from external camera modules. This is a dependency for
the V4L2 driver patches that will likely be merged in v5.9 or v5.10.
On top of that there are a couple of fixes across the board as well as
some improvements.
From a feature point of view this also adds support for horizontal
reflection and 180° rotation of planes.
-----BEGIN PGP SIGNATURE-----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=d3zu
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.9-rc1' of ssh://git.freedesktop.org/git/tegra/linux into drm-next
drm/tegra: Changes for v5.9-rc1
This set of patches contains a few preparatory patches to enable video
capture support from external camera modules. This is a dependency for
the V4L2 driver patches that will likely be merged in v5.9 or v5.10.
On top of that there are a couple of fixes across the board as well as
some improvements.
From a feature point of view this also adds support for horizontal
reflection and 180° rotation of planes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200717162011.1661788-1-thierry.reding@gmail.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8UzA4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGQ7cH/3v+Gv+SmHJCvaT2
CSu0+7okVnYbY3UTb3hykk7/aOqb6284KjxR03r0CWFzsEsZVhC5pvvruASSiMQg
Pi04sLqv6CsGLHd1n+pl4AUYEaxq6k4KS3uU3HHSWxrahDDApQoRUx2F8lpOxyj8
RiwnoO60IMPA7IFJqzcZuFqsgdxqiiYvnzT461KX8Mrw6fyMXeR2KAj2NwMX8dZN
At21Sf8+LSoh6q2HnugfiUd/jR10XbfxIIx2lXgIinb15GXgWydEQVrDJ7cUV7ix
Jd0S+dtOtp+lWtFHDoyjjqqsMV7+G8i/rFNZoxSkyZqsUTaKzaR6JD3moSyoYZgG
0+eXO4A=
=9EpR
-----END PGP SIGNATURE-----
Merge v5.8-rc6 into drm-next
I've got a silent conflict + two trees based on fixes to merge.
Fixes a silent merge with amdgpu
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fix below warnings reported by coccicheck:
./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c:557:2-7: WARNING: NULL check before some freeing functions is not needed.
Fixes: 4d55b0dd1c ("drm/amd/display: Add DCN3 CLK_MGR")
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
certain umc macros are common across umc versions
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set valid_in_vf to false for the message not support in vf mode on
sienna cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some asic may not support for some message of set mp1 state.
If the return value of smu_send_smc_msg is -EINVAL, that means it failed
to send msg to smc as it can not map an valid message for the ASIC. And
with that case, smu_set_mp1_state should be skipped as those ASIC was in
fact do not support for that.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove notes about migrating from the old driver which is
retired as all users are now migrated.
Update the text to reflect that we support PL110 and PL111
alike.
Drop the bullet on memory bandwidth scaling: this has been
implemented.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720130327.92364-1-linus.walleij@linaro.org
amd-drm-next-5.9-2020-07-17:
amdgpu:
- SI UVD/VCE clock support
- Updates for Sienna Cichlid
- Expose drm rotation property
- Atomfirmware updates for renoir
- updates to GPUVM hub handling for different register layouts
- swSMU restructuring and cleanups
- RAS fixes
- DC fixes
- mode1 reset support for Sienna Cichlid
- Add support for Navy Flounder GPUs
amdkfd:
- Add SMI events watch interface
UAPI:
- Add amdkfd SMI events watch interface
Userspace which uses this interface:
2235ede34c
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200717132022.4014-1-alexander.deucher@amd.com
Nothing too exciting:
- a cleanup of our clock handling and improved error handling in this
area from Lubomir
- conversion to pin_user_pages for long page references from John
- fixed PM runtime API error handling from Navid
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/d9e2660d71051bf3cab8aa7afc9f62102ac910d9.camel@pengutronix.de
- Fix use after free issue in component bind error path by keeping
memory allocated as long as the driver is bound. This will be replaced
with drm managed memory in the next round.
- Fix bus_flags overriding logic in parallel-display.
- Disable regulator in imx-tve bind error path.
- Drop unnecessary best_encoder callback.
- Remove an unused enum in imx-ldb.
- Bail out early on missing panel or bridge in parallel-display to speed
up -EPROBE_DEFER path.
- Disable both LDB channels in split mode.
- Restore RGB32, BGR32 format support.
- Fix tiled image conversion in case of out of order interrupts.
- Remove a superfluous error message in imx-tve.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXxWaNRcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwNEGAQDrO2RvAmlfutgj/3D04HFFlKnb
8MJq+ZmAdii20r9Y9gD/V0VVNJf6KcJmw9EbeO9laCh2EJRm3xN0CuxtfcPL1g4=
=ad/y
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2020-07-20' of git://git.pengutronix.de/pza/linux into drm-next
drm/imx: error path fixes and cleanups
- Fix use after free issue in component bind error path by keeping
memory allocated as long as the driver is bound. This will be replaced
with drm managed memory in the next round.
- Fix bus_flags overriding logic in parallel-display.
- Disable regulator in imx-tve bind error path.
- Drop unnecessary best_encoder callback.
- Remove an unused enum in imx-ldb.
- Bail out early on missing panel or bridge in parallel-display to speed
up -EPROBE_DEFER path.
- Disable both LDB channels in split mode.
- Restore RGB32, BGR32 format support.
- Fix tiled image conversion in case of out of order interrupts.
- Remove a superfluous error message in imx-tve.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ac4452eb3a989bf5d85b65fd30840a21f15ec301.camel@pengutronix.de
UAPI Changes:
Cross-subsystem Changes:
- Convert panel-dsi-cm and ingenic bindings to YAML.
- Add lockdep annotations for dma-fence. \o/
- Describe why indefinite fences are a bad idea
- Update binding for rocktech jh057n00900.
Core Changes:
- Add vblank workers.
- Use spin_(un)lock_irq instead of the irqsave/restore variants in crtc code.
- Add managed vram helpers.
- Convert more logging to drm functions.
- Replace more http links with https in core and drivers.
- Cleanup to ttm iomem functions and implementation.
- Remove TTM CMA memtype as it doesn't work correctly.
- Remove TTM_MEMTYPE_FLAG_MAPPABLE for many drivers that have no
unmappable memory resources.
Driver Changes:
- Add CRC support to nouveau, using the new vblank workers.
- Dithering and atomic state fix for nouveau.
- Fixes for Frida FRD350H54004 panel.
- Add support for OSD mode (sprite planes), IPU (scaling) and multiple
panels/bridges to ingenic.
- Use managed vram helpers in ast.
- Assorted small fixes to ingenic, i810, mxsfb.
- Remove optional unused ttm dummy functions.
-----BEGIN PGP SIGNATURE-----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=jDr3
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-07-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.9:
UAPI Changes:
Cross-subsystem Changes:
- Convert panel-dsi-cm and ingenic bindings to YAML.
- Add lockdep annotations for dma-fence. \o/
- Describe why indefinite fences are a bad idea
- Update binding for rocktech jh057n00900.
Core Changes:
- Add vblank workers.
- Use spin_(un)lock_irq instead of the irqsave/restore variants in crtc code.
- Add managed vram helpers.
- Convert more logging to drm functions.
- Replace more http links with https in core and drivers.
- Cleanup to ttm iomem functions and implementation.
- Remove TTM CMA memtype as it doesn't work correctly.
- Remove TTM_MEMTYPE_FLAG_MAPPABLE for many drivers that have no
unmappable memory resources.
Driver Changes:
- Add CRC support to nouveau, using the new vblank workers.
- Dithering and atomic state fix for nouveau.
- Fixes for Frida FRD350H54004 panel.
- Add support for OSD mode (sprite planes), IPU (scaling) and multiple
panels/bridges to ingenic.
- Use managed vram helpers in ast.
- Assorted small fixes to ingenic, i810, mxsfb.
- Remove optional unused ttm dummy functions.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d6bf269e-ccb2-8a7b-fdae-226e9e3f8274@linux.intel.com
drm_atomic_crtc_check enforces that ::active can only be true if
::enable is as well.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not necessary to retrieve the power features status when the
asic is booted up the first time. This patch can have the features
enablement status still checked in suspend/resume case and removed
from the first boot up sequence.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix this warning:
CC [M] drivers/gpu/drm/amd/amdgpu/gfxhub_v1_1.o
In file included from drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h:29,
from drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h:26,
from drivers/gpu/drm/amd/amdgpu/amdgpu.h:43,
from drivers/gpu/drm/amd/amdgpu/df_v3_6.c:23:
drivers/gpu/drm/amd/amdgpu/df_v3_6.c: In function ‘df_v3_6_pmc_get_count’:
./include/drm/drm_print.h:487:2: warning: ‘hi_base_addr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
487 | __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/df_v3_6.c:649:25: note: ‘hi_base_addr’ was declared here
649 | uint32_t lo_base_addr, hi_base_addr, lo_val = 0, hi_val = 0;
| ^~~~~~~~~~~~
In file included from drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h:29,
from drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h:26,
from drivers/gpu/drm/amd/amdgpu/amdgpu.h:43,
from drivers/gpu/drm/amd/amdgpu/df_v3_6.c:23:
./include/drm/drm_print.h:487:2: warning: ‘lo_base_addr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
487 | __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/df_v3_6.c:649:11: note: ‘lo_base_addr’ was declared here
649 | uint32_t lo_base_addr, hi_base_addr, lo_val = 0, hi_val = 0;
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All gc/mmhub register access and operation should be in gfxhub/mmhub level.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to move get_invalidate_req into gfxhub/mmhub level. It will avoid
mismatch of the different gfxhub/mmhub register offsets and fields in the same
gmc block.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to introduce vmhub funcs helper to add following callback
(print_l2_protection_fault_status). Each GC/MMHUB register specific programming
should be in gfxhub/mmhub level.
v2: remove the condition of funcs assignment.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to add set_vm_fault_masks helper to amdgpu_gmc to refine the
original programming.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a member in vmhub structure to store the vm fault interrupt
masks for different version gfxhubs/mmhubs.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The below 3 messages are not supported on Renoir
SMU_MSG_PrepareMp1ForShutdown
SMU_MSG_PrepareMp1ForUnload
SMU_MSG_PrepareMp1ForReset
It needs to revert patch:
drm/amd/powerplay: drop unnecessary message support check
to avoid set mp1 state fail during gpu reset on renoir.
Signed-off-by: changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will tell users if the faulty page has been written to
external eeprom device in dmesg log.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver does support some not-mapable resources, but
those are already handled correctly in the switch/case
statement in the code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/378243/
The driver doesn't expose any not-mapable memory resources.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/378239/
v3:
* Rebase (Manasi)
v2:
* Rebase (Manasi)
As both VRR min and max are already part of drm_display_info,
drm can expose this VRR range for each connector.
Hence this logic should move to core DRM.
This reverts commit 727962f030.
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: AMD gfx <amd-gfx@lists.freedesktop.org>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
NULL dereference occurs when string that is not ended with space or
newline is written to some dpm sysfs interface (for example pp_dpm_sclk).
This happens because strsep replaces the tmp with NULL if the delimiter
is not present in string, which is then dereferenced by tmp[0].
Reproduction example:
sudo sh -c 'echo -n 1 > /sys/class/drm/card0/device/pp_dpm_sclk'
Signed-off-by: Paweł Gronowski <me@woland.xyz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Avoid kernel crash when vddci_control is SMU7_VOLTAGE_CONTROL_NONE and
vddci_voltage_table is empty. It has been tested on Intel Hades Canyon
(i7-8809G).
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208489
Fixes: ac7822b002 ("drm/amd/powerplay: add smumgr support for VEGAM (v2)")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Enable SMU i2c bus access for sienna_cichlid asics.
v2: change callback name
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver uses it for EEPROM access, but it's just an i2c bus.
v2: change the callback name as well.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no longer a ras dependency so it's safe to expose
on all boards.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver uses it for EEPROM access, but it's just an i2c bus.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not really ras related. It's just a lock for the
bus in general. This removes the ras dependency from
the smu i2c bus.
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
NULL dereference occurs when string that is not ended with space or
newline is written to some dpm sysfs interface (for example pp_dpm_sclk).
This happens because strsep replaces the tmp with NULL if the delimiter
is not present in string, which is then dereferenced by tmp[0].
Reproduction example:
sudo sh -c 'echo -n 1 > /sys/class/drm/card0/device/pp_dpm_sclk'
Signed-off-by: Paweł Gronowski <me@woland.xyz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid kernel crash when vddci_control is SMU7_VOLTAGE_CONTROL_NONE and
vddci_voltage_table is empty. It has been tested on Intel Hades Canyon
(i7-8809G).
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208489
Fixes: ac7822b002 ("drm/amd/powerplay: add smumgr support for VEGAM (v2)")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To accommodate VCN instances variance, otherwise it may trigger
smu response error for configuration with less instances.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's in accordance with pmfw 65.3.0 for navy_flounder.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It should be DCLK1->PPCLK_DCLK_1 and VCLK->PPCLK_VCLK_0.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge vcn firmware shared memory bo into vcn vcpu bo.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 21b704d783.
To merge vcn firmware shared memory bo into vcn vcpu bo.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Implement an interface to obtain plane size caps
[How]
Add min_width, min_height fields to dc_plane_cap structure.
Set values to 16x16 for discrete ASICs, and 64x64 for others.
Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Fix build error by protecting code with config guard
to enable building amdgpu without CONFIG_DRM_AMD_DC_DCN
enabled. This option is disabled by default for allmodconfig.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Accessing dcn20_add_dsc_to_stream_resource directly
causes build failure for configuration which has
CONFIG_DRM_AMD_DC_DCN disabled. Fix this by
calling the corresponding function exposed via dc
resource functions.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
On DCN20, Some features would not be activated when ALLM was turned on.
TV seemed to activate only the latest info packet sent, and the ALLM
info packet was sent after the VSIF info packet.
The packet indices was also inconsistent between DCN10 and DCN20.
[how]
Change the packet indices of DCN20 to match those of DCN10.
This makes them consistent and also makes the vendor info packet
be sent after the hfvsif info packet.
Signed-off-by: Naveed Ashfaq <Naveed.Ashfaq@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dcn20_add_dsc_to_stream_resource is accessed in amdgpu_dm directly.
This creates build error for configuration with DCN disabled.
[How]
Make the function available through a resource pool function so
that dcn20 function need not be called directly.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The capability fields are reserved for DSC branch
only to report the capability related to the
branch's DSC decoder.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
With ABM implemented on DMUB the ABM enablement
shoudn't be solely rely on dmcu. Otherwise it won't work
if dmcu is disabled.
[How]
1. Decouple dmcub config copy from dmcu iram copy.
2. Set abm connector property if either dmcu or dmub enabled.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To support V3
[How]
Generate new VSIF for V3
Signed-off-by: Reza Amini <Reza.Amini@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need to add new parameters to debugfs logging so
we will know what parameters DSC is using for
debug purposes. So we are adding a read function
in debugfs to read DSC status registers
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Scaler vendor confirmed the 5ms was not helpful so no point in keeping
it.
[How]
Revert 5ms delay after setting training pattern.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For passthrough device, we do baco reset after 1st vm boot so
if we disable SMU on 1st VM shutdown baco reset will fail for
2nd vm boot.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
outstanding log reaches threshold will trigger IH ring1/2's wptr
reported, that will avoid generating interrupts to ring0 too frequent.
But if ring1/2's wptr hasn't been increased for a long time, the outstanding log
can't reach threshold so that driver can't get latest wptr info and
miss some interrupts.
v2: squash in warning fix
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set xgmi support flag suring nv ip init sequence
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
do not abort psp asd load sequence for sienna cichlid
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Per designs, the swSMU code is separated into four layers. And the typical
calling flow should be like: amdgpu_smu.c -> ${asic}_ppt.c -> smu_v11/12_0.c
-> smu_cmn.c. Compile errors will come out for any violations. This can
help to prevent cross callings(e.g. amdgpu_smu.c -> ${asic}_ppt.c ->
amdgpu_smu.c -> ${asic}_ppt.c) which were common in our code.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can eliminate the cross callings and maintain clear
code layer.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These messages are known to be supported by all ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Considering they can be shared by all ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid cross calling and maintain clear code layer.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As they are shared by all ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Maximum code sharing.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Considering they are shared by all ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are moving to centralize all feature enablement/support checking and
setting APIs in smu_cmn.c.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Considering they are shared by all ASICs. And we are moving
to centralize all feature enablement/support checking and
setting APIs in smu_cmn.c.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of having each for smu v11 and v12.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Considering it is shared by all ASICs and smu_cmn.c should be
the right place.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Considering it is shared by all ASICs and smu_cmn.c should be
the right place.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As those APIs of smu_v11/v12 are more widely called. And they
need this check also.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those code were obsoleted by new common API
smu_cmn_to_asic_specific_index().
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By this we can drop redundant code.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Considering the data table retrieving can be more widely shared,
amdgpu_atombios.c is the right place.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
call psp_int_ta_microcode() to parse the ta firmware.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To suppress the compile error below for "ARCH=arc".
drivers/gpu/drm/amd/amdgpu/../powerplay/arcturus_ppt.c: In function 'arcturus_fill_eeprom_i2c_req':
>> arch/arc/include/asm/bug.h:22:2: error: implicit declaration of function 'pr_warn'; did you mean 'pci_warn'? [-Werror=implicit-function-declaration]
22 | pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
| ^~~~~~~
include/asm-generic/bug.h:62:57: note: in expansion of macro 'BUG'
62 | #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
| ^~~
drivers/gpu/drm/amd/amdgpu/../powerplay/arcturus_ppt.c:2157:2: note: in expansion of macro 'BUG_ON'
2157 | BUG_ON(numbytes > MAX_SW_I2C_COMMANDS);
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Seems to be due to a bad merge. Code was originally added in
commit 5aaa8fff3a ("drm/amd/powerplay: unload mp1 for Arcturus RAS baco reset")
but later removed in commit 7f70443fd8 ("drm/amdgpu: set mp1 state before reload").
but is back again.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is an ioctl callback, so we're guaranteed to have IRQs enabled when
calling this function. Use the plain _irq() variants of spin_(un)lock()
to make this more obvious.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-6-lyude@redhat.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This one's easy - we're already calling kzalloc(GFP_KERNEL) in this
function, so we must already be guaranteed to have IRQs enabled when
calling this. So, use the plain _irq() variants of spin_(un)lock() to
make this more obvious.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-5-lyude@redhat.com
This function is only ever called from ioctl context, so we're
guaranteed to have interrupts enabled. Stop using the irqsave/irqrestore
variants of spin_(un)lock_irq() to make this more obvious.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-4-lyude@redhat.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is only called from:
* Atomic modesetting hooks
* Module probing routines
* Legacy modesetting hooks
All of which have IRQs enabled, so we can also get rid of
irqsave/restore here to make the IRQ context of this function more
obvious.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-3-lyude@redhat.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
All of the drivers in the kernel tree only call this from one of the
following contexts:
* drm_crtc_funcs->reset
* During initial module load
Since both of these contexts are guaranteed to have interrupts enabled
beforehand, there's no need to use the irqsave/irqrestore variants of
spin_(un)lock(). So, fix this to make the irq context of this function
more obvious.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720190736.180297-2-lyude@redhat.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The driver doesn't expose any not-mapable memory resources.
v2: remove unused man variable as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/378246/
The driver doesn't expose any not-mapable memory resources.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/378244/
The driver doesn't expose any not-mapable memory resources.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/378241/
The original intention was to avoid CPU page table unmaps
when BOs move between the GTT and SYSTEM domain.
The problem is that this never correctly handled changes
in the caching attributes or backing pages.
Just drop this for now and simply unmap the CPU page
tables in all cases.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/378240/
Only functional change is to always keep io_reserved_count up to date
for debugging even when it is not used otherwise.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/378242/
Just use the use_io_reserve_lru flag. It doesn't make much
sense to have two flags.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/378238/
Nouveau is the only user of this functionality and evicting io space
on -EAGAIN is really a misuse of the return code.
Instead switch to using -ENOSPC here which makes much more sense and
simplifies the code.
This could unbreak something as we now cleanly return EAGAIN, but the
chance for this are rather low.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/378237/
Implementing those is completely unnecessary.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Link: https://patchwork.freedesktop.org/patch/378236/
The helper doesn't expose any not-mapable memory resources.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/377649/
The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Use a bit-mask of EOF irqs to determine when all required idmac
channel EOFs have been received for a tile conversion, and only do
tile completion processing after all EOFs have been received. Otherwise
it was found that a conversion would stall after the completion of a
tile and the start of the next tile, because the input/read idmac
channel had not completed and entered idle state, thus locking up the
channel when attempting to re-start it for the next tile.
Fixes: 0537db801b ("gpu: ipu-v3: image-convert: reconfigure IC per tile")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Combine the rotate_irq() and norotate_irq() handlers into a single
eof_irq() handler.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
RGB32 and BGR32 formats were inadvertently removed from the switch
statement in ipu_pixelformat_to_colorspace(). Restore them.
Fixes: a59957172b ("gpu: ipu-v3: enable remaining 32-bit RGB V4L2 pixel formats")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Both of the two LVDS channels should be disabled for split mode
in the encoder's ->disable() callback, because they are enabled
in the encoder's ->enable() callback.
Fixes: 6556f7f82b ("drm: imx: Move imx-drm driver out of staging")
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
We do some string parsing and string comparison in front of
drm_of_find_panel_or_bridge(). All this work is useless if the call
fails. Move drm_of_find_panel_or_bridge() infront of the parsing work to
fail early.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Since commit 5e501ed725 ("drm/imx: imx-ldb: allow to determine bus
format from the connected panel") the enum isn't used anymore. Drop it
to cleanup the code a bit.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The best_encoder() callback is used by the drm-core to find an encoder
if the connector is connected to multiple encoders but the parallel, tve
and ldb uses always the 1-encoder : 1-connector setup. Such a simple
setup can be handled by the drm-core.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add missing regulator_disable() as devm_action to avoid dedicated
unbind() callback and fix the missing error handling.
Fixes: fcbc51e54d ("staging: drm/imx: Add support for Television Encoder (TVEv2)")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The bus_flags handling logic does not seem to cover all potential
usecases. Specifically, this seems to fail with an "edt,etm0700g0edh6"
display attached to an 24bit display interface, with interface-pix-fmt
= "rgb24" set in DT.
This patch fixes the problem by overriding the imx_crtc_state->bus_flags
from the imxpd->bus_flags only if the DT property "interface-pix-fmt" is
present or if the DI provides no formats.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Component driver structures allocated with devm_kmalloc() in bind() are
freed automatically after unbind(). Since the contained drm structures
are accessed afterwards in drm_mode_config_cleanup(), move the
allocation into probe() to extend the driver structure's lifetime to the
lifetime of the device. This should eventually be changed to use drm
resource managed allocations with lifetime of the drm device.
We also need to ensure that all componets are available during the
unbind() so we need to call component_unbind_all() before we free
non-devres resources like planes.
Note this patch fixes the the use after free bug but introduces a
possible boot loop issue. The issue is triggered if the HDMI support is
enabled and a component driver always return -EPROBE_DEFER, see
discussion [1] for more details.
[1] https://lkml.org/lkml/2020/3/24/1467
Fixes: 17b5001b51 ("imx-drm: convert to componentised device support")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[m.felsch@pengutronix: fix imx_tve_probe()]
[m.felsch@pengutronix: resort component_unbind_all())
[m.felsch@pengutronix: adapt commit message]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719171428.60470-1-grandmaster@al2klimov.de
In contrast to other display controllers on imx like DCSS and ipuv3
lcdif/mxsfb does not support detiling e.g. vivante tiled layouts.
Since mesa might assume otherwise make it explicit that only
DRM_FORMAT_MOD_LINEAR is supported.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/26877532e272c12a74c33188e2a72abafc9a2e1c.1584973664.git.agx@sigxcpu.org
UAPI Changes:
Cross-subsystem Changes:
- Add ckoenig as dma-buf maintainer.
- Revert invalid fix for dma-fence-chain, and fix selftest.
- Add fixmes to amifb about APUS support.
- Use array3_size in fbcon_prepare_logo, and struct_size() in alloc_apertures.
- Fix leaks in neofb, fb/savage and omapfb.
- Other small fixes to fb code.
- Convert some dt bindings to schema for some panels, and fix simple-framebuffer dt example.
Core Changes:
- Add DRM_FORMAT_MOD_GENERIC_16_16_TILE as alias to DRM_FORMAT_MOD_SAMSUNG_16_16_TILE,
as it can be used more generic.
- Add support for multiple DispID extension blocks in edid.
- Use https instead of http for some of the urls.
- Use drm_* macros for logging in mipi-dsi and fb-helper.
- Further cleanup ttm_mem_reg handling.
- Remove duplicated words in comments.
Driver Changes:
- Use __drm_atomic_helper_crtc_reset in all atomic drivers.
- Add Amlogic Video FBC support to meson and fourcc to core.
- Refactor hisilicon's hibmc_drv_vdac.
- Create a TXP CRTC for vc4.
- Rework cursor support in ast.
- Fix runtime PM in STM.
- Allow bigger cursors in vkms.
- Cleanup sg handling in radeon and amdgpu, and stop creating dummy
gtt nodes with ttm fixed.
- Rework crtc handling in mgag200.
- Miscellaneous small fixes to meson, vgem, bridge/dw-hdmi,
panel/auo,b116xw03, panel/LG LB070WV8, lima, bridge/sil_sii8620,
virtio, tilcdc.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAl8QO6cACgkQ/lWMcqZw
E8O/xxAAick0N8Q8sf0bL7Emh7iiHeUl2fWzbfQ8VmKEOjoScO9KYz7SSuSW8868
qsy1pdI+T/ko2shl9w8hZ8aunNDOdCycL7F3WNSKT+SNAP2XY7R57xXjn0NCsfm/
iY3RsST6vU1gJMFyS/6U+4OddbTcqjDT5dwSD26/kva86s2CiS/P/I6dxoH0bcDg
Yo9QcNflZKjnP/0imRYDAmm3y7N09VKtYa2Df5dOCJiiijXxMTSQN6TB/TfFtYTi
CfyIm7dEF1Nnmy+jlxiYxAXVZYlPvIJ/7nTInO/gRGLhiEyIuG9u1lZSna9kRGrn
5eg+41u4sq3YnDB5+qZmMJ7yBKFIy51+5JweVQeaykBW8p4Z4Qrir2ENPLZWuyeC
CR1cOUUrUkSaMThy2H6IPe+T6BDzKpceuHnOxv7MmTfBSzLwRR7Bn216zrC33sET
i6AsS6Ir+lfkH26oGceceEHdL5biMjFuRPiq8MfzzEfnh1o7RZ2wvEg7gHV/QeiE
ugD7peLR28gJnupFQyBzcbyqKr761W7twgwAOvEOo3Up1LldxYLmQmc3VQeB84j2
mndhyBfXD6Jniuit2+PxuNXGRcK1oYExRxJKD9msZCkUMe1pezSDrHZcc+emnh2G
bqy8EPWcpCL0KkO/xICdJx57UwaLfAMsyP1C4u0vxy2GGSirxeg=
=XKYB
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-07-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.9:
UAPI Changes:
Cross-subsystem Changes:
- Add ckoenig as dma-buf maintainer.
- Revert invalid fix for dma-fence-chain, and fix selftest.
- Add fixmes to amifb about APUS support.
- Use array3_size in fbcon_prepare_logo, and struct_size() in alloc_apertures.
- Fix leaks in neofb, fb/savage and omapfb.
- Other small fixes to fb code.
- Convert some dt bindings to schema for some panels, and fix simple-framebuffer dt example.
Core Changes:
- Add DRM_FORMAT_MOD_GENERIC_16_16_TILE as alias to DRM_FORMAT_MOD_SAMSUNG_16_16_TILE,
as it can be used more generic.
- Add support for multiple DispID extension blocks in edid.
- Use https instead of http for some of the urls.
- Use drm_* macros for logging in mipi-dsi and fb-helper.
- Further cleanup ttm_mem_reg handling.
- Remove duplicated words in comments.
Driver Changes:
- Use __drm_atomic_helper_crtc_reset in all atomic drivers.
- Add Amlogic Video FBC support to meson and fourcc to core.
- Refactor hisilicon's hibmc_drv_vdac.
- Create a TXP CRTC for vc4.
- Rework cursor support in ast.
- Fix runtime PM in STM.
- Allow bigger cursors in vkms.
- Cleanup sg handling in radeon and amdgpu, and stop creating dummy
gtt nodes with ttm fixed.
- Rework crtc handling in mgag200.
- Miscellaneous small fixes to meson, vgem, bridge/dw-hdmi,
panel/auo,b116xw03, panel/LG LB070WV8, lima, bridge/sil_sii8620,
virtio, tilcdc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8b360d65-f228-9286-d247-3004156a5254@linux.intel.com
Cleaning up ast's MM code with ast_mm_fini() resets the write-combine
flags on the VRAM I/O memory. Drop ast_mm_fini() in favor of an auto-
release callback. Releasing the device also executes the callback.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-7-tzimmermann@suse.de
Posting the GPU requires the correct DRAM type to be stored in
struct ast_private. Therefore first initialize the DRAM info and
then post the GPU. This restores the original order of instructions
in this function.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Fixes: bad09da6de ("drm/ast: Fixed vram size incorrect issue on POWER")
Cc: Joel Stanley <joel@jms.id.au>
Cc: Y.C. Chen <yc_chen@aspeedtech.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: "Y.C. Chen" <yc_chen@aspeedtech.com>
Cc: <stable@vger.kernel.org> # v4.11+
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-6-tzimmermann@suse.de
VRAM size detection is only relevant to the memory management. Move
the code into ast_mm.c.
While at it, rename the function to ast_get_vram_size(). The function
argument's type is now struct ast_private. The result is stored in a
local variable and not in struct ast_private any longer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-5-tzimmermann@suse.de
Calling drmm_vram_helper_init() sets up a managed instance of
VRAM MM. Releasing the DRM device also frees the memory manager.
The patch also updates the DRM documentation for VRAM helpers. The
tutorial now describes the new managed interface. The old interfaces
are deprecated and should not be used in new code.
v2:
* rename init function to drmm_vram_helper_init()
* return errno code from init function; caller does not
need vram_mm anyway
* update documentation and remove docs for deprecated
un-managed functions
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125353.31512-2-tzimmermann@suse.de
Silence compiler warning about used but uninitialized 'ipu_state'
variable. In practice, the variable would never be used when
uninitialized, but the compiler cannot know that 'priv->ipu_plane' will
always be NULL if CONFIG_INGENIC_IPU is disabled.
Silence the warning by initializing the value to NULL.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719093834.14084-1-paul@crapouillou.net
The Xilinx ZynqMP SoC has a hardened display pipeline named DisplayPort
Subsystem. It includes a buffer manager, a video pipeline renderer
(blender), an audio mixer and a DisplayPort source controller
(transmitter). The DMA engine the provide data to the buffer manager, as
well as the DisplayPort PHYs that drive the lanes, are external to the
subsystem and interfaced using the DMA engine and PHY APIs respectively.
This driver supports the DisplayPort Subsystem and implements
- Two planes, for graphics and video
- One CRTC that supports alpha blending
- One encoder for the DisplayPort transmitter
- One connector for an external monitor
It currently doesn't support
- Color keying
- Test pattern generation
- Audio
- Live input from the Programmable Logic (FPGA)
- Output to the Programmable Logic (FPGA)
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
in etnaviv_gpu_submit, etnaviv_gpu_recover_hang, etnaviv_gpu_debugfs,
and etnaviv_gpu_init the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Combining horizontal and vertical reflections gives us 180 degrees of
rotation. Both reflection modes are already supported, and thus, we just
need to mark the 180 rotation mode as supported. The 180 rotation mode is
needed for devices like Nexus 7 tablet, which have display panel mounted
upside-down.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Support horizontal reflection mode which will allow to support 180°
rotation mode when combined with the vertical reflection.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This makes the naming consistent with the DRM core.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
In the function tegra_dc_probe(), when get irq failed, the function
platform_get_irq() logs an error message, so remove redundant message
here.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
There are two PATBASE address registers, one for linear layout and other
for tiled. The driver's address registers list misses the tiled PATBASE
register.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra TRM documentation states that hardware should be in a default state
when power partition is turned off, i.e. reset should be asserted. This
patch adds the missing reset assertions.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The hardware documentation uses AVDD_IO_HDMI_DP and VDD_HDMI_DP_PLL to
denote the two power supplies that drive the HDMI/DP outputs of the SOR.
Use these names instead of the arbitrary AVDD_IO and VDD_PLL names that
were used previously to avoid confusion.
Signed-off-by: Thierry Reding <treding@nvidia.com>
When job hangs and there is a memory error pointing at channel's push
buffer, it is very handy to know the push buffer's state. This patch
makes the push buffer's state to be dumped into KMSG in addition to the
job's gathers.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Once channel's job is hung, it dumps the channel's state into KMSG before
tearing down the offending job. If multiple channels hang at once, then
they dump messages simultaneously, making the debug info unreadable, and
thus, useless. This patch adds mutex which allows only one channel to emit
debug messages at a time.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch fixes gather's BO refcounting on a pinning error. Gather's BO
won't be leaked now if something goes wrong.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
We don't need to hold and pin original BOs of the gathers in a case of
enabled firewall because in this case gather's content is copied and the
copy is used by the executed job.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
SW can trigger MIPI pads calibration any time after power on
but calibration results will be latched and applied to the pads
by MIPI CAL unit only when the link is in LP-11 state and then
status register will be updated.
For CSI, trigger of pads calibration happen during CSI stream
enable where CSI receiver is kept ready prior to sensor or CSI
transmitter stream start.
So, pads may not be in LP-11 at this time and waiting for the
calibration to be done immediate after calibration start will
result in timeout.
This patch splits tegra_mipi_calibrate() and tegra_mipi_wait()
so triggering for calibration and waiting for it to complete can
happen at different stages.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use readl_relaxed_poll_timeout() in tegra_mipi_wait() to simplify
the code.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra CSI driver need a separate MIPI device for each channel as
calibration of corresponding MIPI pads for each channel should
happen independently.
So, this patch updates tegra_mipi_request() API to add a device_node
pointer argument to allow creating mipi device for specific device
node rather than a device.
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When the extra HPD polling in sun4i_hdmi was removed, the result of
HPD was accidentally inverted.
Fix this by inverting the check.
Fixes: bda8eaa6de ("drm: sun4i: hdmi: Remove extra HPD polling")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711011030.21997-1-wens@kernel.org
Support multiple panels or bridges connected to the same DPI output of
the SoC. This setup can be found for instance on the GCW Zero, where the
same DPI output interfaces the internal 320x240 TFT panel, and the ITE
IT6610 HDMI chip.
v2: No change
v3: Allow > 80-char lines where it makes sense
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-11-paul@crapouillou.net
Add support for the Image Processing Unit (IPU) found in all Ingenic
SoCs.
The IPU can upscale and downscale a source frame of arbitrary size
ranging from 4x4 to 4096x4096 on newer SoCs, with bicubic filtering
on newer SoCs, bilinear filtering on older SoCs. Nearest-neighbour can
also be obtained with proper coefficients.
Starting from the JZ4725B, the IPU supports a mode where its output is
sent directly to the LCDC, without having to be written to RAM first.
This makes it possible to use the IPU as a DRM plane on the compatible
SoCs, and have it convert and scale anything the userspace asks for to
what's available for the display.
Regarding pixel formats, older SoCs support packed YUV 4:2:2 and various
planar YUV formats. Newer SoCs introduced support for RGB.
Since the IPU is a separate hardware block, to make it work properly the
Ingenic DRM driver will now register itself as a component master in
case the IPU driver has been enabled in the config.
When enabled in the config, the CRTC will see the IPU as a second primary
plane. It cannot be enabled at the same time as the regular primary
plane. It has the same priority, which means that it will also display
below the overlay plane.
v2: - ingenic-ipu is no longer its own module. It will be built
into the ingenic-drm module.
- If enabled in the config, both the core driver and the IPU
driver will register as components; otherwise the core
driver will bypass that and call the ingenic_drm_bind()
function directly.
- Since both files now build into the same module, the
symbols previously exported as GPL are not exported anymore,
since they are only used internally.
- Fix SPDX license header in ingenic-ipu.h
- Avoid using 'for(;;);' loops without trailing statement(s)
v3: - Pass priv structure to IRQ handler; that way we don't hardcode
the expectation that the IPU plane is at index #0.
- Rework osd_changed() to account for src_* changes
- Add multiplanar YUV 4:4:4 support
- Commit fb addresses to HW at vblank, since addr registers are
not shadow registers
- Probe IPU component later so that IPU plane is last
- Fix driver not working on IPU-less hardware
- Use IPU driver's name as the IRQ name to avoid having two
'ingenic-drm' in /proc/interrupts
- Fix IPU only working for still images on JZ4725B
- Add a bit more code comments
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-10-paul@crapouillou.net
All Ingenic SoCs starting from the JZ4725B support OSD mode.
In this mode, two separate planes can be used. They can have different
positions and sizes, and one can be overlayed on top of the other.
v2: Use fallthrough; instead of /* fall-through */
v3: - Add custom atomic_tail function to handle case where HW gives no
VBLANK
- Use regmap_set_bits() / regmap_clear_bits() when possible
- Use dma_hwdesc_f{0,1} fields in priv structure instead of array
- Use dmam_alloc_coherent() instead of dma_alloc_coherent()
- Use more meaningful 0xf0 / 0xf1 values as DMA descriptors IDs
- Add a bit more code comments
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-9-paul@crapouillou.net
If you pass a string that is not terminated with a carriage return to
dev_err(), it will eventually be printed with a carriage return, but
not right away, since the kernel will wait for a pr_cont().
v2: New patch
v3: No change
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-5-paul@crapouillou.net
Full rename without any modification, except to the Makefile.
Renaming ingenic-drm.c to ingenic-drm-drv.c allow to decouple the module
name from the source file name in the Makefile. This will be useful
later when more source files are added.
v2: New patch
v3: No change
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-4-paul@crapouillou.net
While I had thought I'd tested this before, it looks like this one issue
slipped by my original CRC patches. Basically, there seem to be a few
rules we need to follow when sending CRC commands to the display
controller:
* CRCs cannot be both disabled and enabled for a single head in the same
flush
* If a head with CRC reporting enabled switches from one OR to another,
there must be a flush before the OR is re-enabled regardless of the
final state of CRC reporting.
So, split nv50_crc_atomic_prepare_notifier_contexts() into two
functions:
* nv_crc_atomic_release_notifier_contexts() - checks whether the CRC
notifier contexts were released successfully after the first flush
* nv_crc_atomic_init_notifier_contexts() - prepares any CRC notifier
contexts for use before enabling reporting
Additionally, in order to force a flush when we re-assign ORs with heads
that have CRCs enabled we split our atomic check function into two:
* nv50_crc_atomic_check_head() - called from our heads' atomic checks,
determines whether a state needs to set or clear CRC reporting
* nv50_crc_atomic_check_outp() - called at the end of the atomic check
after all ORs have been added to the atomic state, and sets
nv50_atom->flush_disable if needed
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <skeggsb@gmail.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629223635.103804-1-lyude@redhat.com
This introduces support for CRC readback on gf119+, using the
documentation generously provided to us by Nvidia:
https://github.com/NVIDIA/open-gpu-doc/blob/master/Display-CRC/display-crc.txt
We expose all available CRC sources. SF, SOR, PIOR, and DAC are exposed
through a single set of "outp" sources: outp-active/auto for a CRC of
the scanout region, outp-complete for a CRC of both the scanout and
blanking/sync region combined, and outp-inactive for a CRC of only the
blanking/sync region. For each source, nouveau selects the appropriate
tap point based on the output path in use. We also expose an "rg"
source, which allows for capturing CRCs of the scanout raster before
it's encoded into a video signal in the output path. This tap point is
referred to as the raster generator.
Note that while there's some other neat features that can be used with
CRC capture on nvidia hardware, like capturing from two CRC sources
simultaneously, I couldn't see any usecase for them and did not
implement them.
Nvidia only allows for accessing CRCs through a shared DMA region that
we program through the core EVO/NvDisplay channel which is referred to
as the notifier context. The notifier context is limited to either 255
(for Fermi-Pascal) or 2047 (Volta+) entries to store CRCs in, and
unfortunately the hardware simply drops CRCs and reports an overflow
once all available entries in the notifier context are filled.
Since the DRM CRC API and igt-gpu-tools don't expect there to be a limit
on how many CRCs can be captured, we work around this in nouveau by
allocating two separate notifier contexts for each head instead of one.
We schedule a vblank worker ahead of time so that once we start getting
close to filling up all of the available entries in the notifier
context, we can swap the currently used notifier context out with
another pre-prepared notifier context in a manner similar to page
flipping.
Unfortunately, the hardware only allows us to this by flushing two
separate updates on the core channel: one to release the current
notifier context handle, and one to program the next notifier context's
handle. When the hardware processes the first update, the CRC for the
current frame is lost. However, the second update can be flushed
immediately without waiting for the first to complete so that CRC
generation resumes on the next frame. According to Nvidia's hardware
engineers, there isn't any cleaner way of flipping notifier contexts
that would avoid this.
Since using vblank workers to swap out the notifier context will ensure
we can usually flush both updates to hardware within the timespan of a
single frame, we can also ensure that there will only be exactly one
frame lost between the first and second update being executed by the
hardware. This gives us the guarantee that we're always correctly
matching each CRC entry with it's respective frame even after a context
flip. And since IGT will retrieve the CRC entry for a frame by waiting
until it receives a CRC for any subsequent frames, this doesn't cause an
issue with any tests and is much simpler than trying to change the
current DRM API to accommodate.
In order to facilitate testing of correct handling of this limitation,
we also expose a debugfs interface to manually control the threshold for
when we start trying to flip the notifier context. We will use this in
igt to trigger a context flip for testing purposes without needing to
wait for the notifier to completely fill up. This threshold is reset
to the default value set by nouveau after each capture, and is exposed
in a separate folder within each CRTC's debugfs directory labelled
"nv_crc".
Changes since v1:
* Forgot to finish saving crc.h before saving, whoops. This just adds
some corrections to the empty function declarations that we use if
CONFIG_DEBUG_FS isn't enabled.
Changes since v2:
* Don't check return code from debugfs_create_dir() or
debugfs_create_file() - Greg K-H
Changes since v3:
(no functional changes)
* Fix SPDX license identifiers (checkpatch)
* s/uint32_t/u32/ (checkpatch)
* Fix indenting in switch cases (checkpatch)
Changes since v4:
* Remove unneeded param changes with nv50_head_flush_clr/set
* Rebase
Changes since v5:
* Remove set but unused variable (outp) in nv50_crc_atomic_check() -
Kbuild bot
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-10-lyude@redhat.com
While most of the functionality on Nvidia GPUs doesn't require using an
explicit handle instead of the main VRAM handle + offset, there are a
couple of places that do require explicit handles, such as CRC
functionality. Since this means we're about to add another
nouveau-chosen handle, let's just go ahead and move any hard-coded
handles into a single header. This is just to keep things slightly
organized, and to make it a little bit easier if we need to add more
handles in the future.
This patch should contain no functional changes.
Changes since v3:
* Correct SPDX license identifier (checkpatch)
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-9-lyude@redhat.com
In order to make sure that we flush disable updates at the right time
when disabling CRCs, we'll need to be able to look at the outp state to
see if we're changing it at the same time that we're disabling CRCs.
So, expose the struct in disp.h.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-8-lyude@redhat.com
While we're not quite ready yet to add support for flexible wndw
mappings, we are going to need to at least keep track of the static wndw
mappings we're currently using in each head's atomic state. We'll likely
use this in the future to implement real flexible window mapping, but
the primary reason we'll need this is for CRC support.
See: on nvidia hardware, each CRC entry in the CRC notifier dma context
has a "tag". This tag corresponds to the nth update on a specific
EVO/NvDisplay channel, which itself is referred to as the "controlling
channel". For gf119+ this can be the core channel, ovly channel, or base
channel. Since we don't expose CRC entry tags to userspace, we simply
ignore this feature and always use the core channel as the controlling
channel. Simple.
Things get a little bit more complicated on gv100+ though. GV100+ only
lets us set the controlling channel to a specific wndw channel, and that
wndw must be owned by the head that we're grabbing CRCs when we enable
CRC generation. Thus, we always need to make sure that each atomic head
state has at least one wndw that is mapped to the head, which will be
used as the controlling channel.
Note that since we don't have flexible wndw mappings yet, we don't
expect to run into any scenarios yet where we'd have a head with no
mapped wndws. When we do add support for flexible wndw mappings however,
we'll need to make sure that we handle reprogramming CRC capture if our
controlling wndw is moved to another head (and potentially reject the
new head state entirely if we can't find another available wndw to
replace it).
With that being said, nouveau currently tracks wndw visibility on heads.
It does not keep track of the actual ownership mappings, which are
(currently) statically programmed. To fix this, we introduce another
bitmask into nv50_head_atom.wndw to keep track of ownership separately
from visibility. We then introduce a nv50_head callback to handle
populating the wndw ownership map, and call it during the atomic check
phase when core->assign_windows is set to true.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-7-lyude@redhat.com
While we expose the ability to turn off hardware dithering for nouveau,
we actually make the mistake of turning it on anyway, due to
dithering_depth containing a non-zero value if our dithering depth isn't
also set to 6 bpc.
So, fix it by never enabling dithering when it's disabled.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-6-lyude@redhat.com
Currently, we modify the depth value stored in the atomic state when
performing a commit in order to workaround the fact we haven't
implemented support for depths higher then 10 yet. This isn't idempotent
though, as it will happen every atomic commit where we modify the OR
state even if the head's depth in the atomic state hasn't been modified.
Normally this wouldn't matter, since we don't modify OR state outside of
modesets, but since the CRC capture region is implemented as part of the
OR state in hardware we'll want to make sure all commits modifying OR
state are idempotent so as to avoid changing the depth unexpectedly.
So, fix this by simply not writing the reduced depth value we come up
with to the atomic state.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-5-lyude@redhat.com
Add some kind of vblank workers. The interface is similar to regular
delayed works, and is mostly based off kthread_work. It allows for
scheduling delayed works that execute once a particular vblank sequence
has passed. It also allows for accurate flushing of scheduled vblank
works - in that flushing waits for both the vblank sequence and job
execution to complete, or for the work to get cancelled - whichever
comes first.
Whatever hardware programming we do in the work must be fast (must at
least complete during the vblank or scanout period, sometimes during the
first few scanlines of the vblank). As such we use a high-priority
per-CRTC thread to accomplish this.
Changes since v7:
* Stuff drm_vblank_internal.h and drm_vblank_work_internal.h contents
into drm_internal.h
* Get rid of unnecessary spinlock in drm_crtc_vblank_on()
* Remove !vblank->worker check
* Grab vbl_lock in drm_vblank_work_schedule()
* Mention self-rearming work items in drm_vblank_work_schedule() kdocs
* Return 1 from drm_vblank_work_schedule() if the work was scheduled
successfully, 0 or error code otherwise
* Use drm_dbg_core() instead of DRM_DEV_ERROR() in
drm_vblank_work_schedule()
* Remove vblank->worker checks in drm_vblank_destroy_worker() and
drm_vblank_flush_worker()
Changes since v6:
* Get rid of ->pending and seqcounts, and implement flushing through
simpler means - danvet
* Get rid of work_lock, just use drm_device->event_lock
* Move drm_vblank_work item cleanup into drm_crtc_vblank_off() so that
we ensure that all vblank work has finished before disabling vblanks
* Add checks into drm_crtc_vblank_reset() so we yell if it gets called
while there's vblank workers active
* Grab event_lock in both drm_crtc_vblank_on()/drm_crtc_vblank_off(),
the main reason for this is so that other threads calling
drm_vblank_work_schedule() are blocked from attempting to schedule
while we're in the middle of enabling/disabling vblanks.
* Move drm_handle_vblank_works() call below drm_handle_vblank_events()
* Simplify drm_vblank_work_cancel_sync()
* Fix drm_vblank_work_cancel_sync() documentation
* Move wake_up_all() calls out of spinlock where we can. The only one I
left was the call to wake_up_all() in drm_vblank_handle_works() as
this seemed like it made more sense just living in that function
(which is all technically under lock)
* Move drm_vblank_work related functions into their own source files
* Add drm_vblank_internal.h so we can export some functions we don't
want drivers using, but that we do need to use in drm_vblank_work.c
* Add a bunch of documentation
Changes since v4:
* Get rid of kthread interfaces we tried adding and move all of the
locking into drm_vblank.c. For implementing drm_vblank_work_flush(),
we now use a wait_queue and sequence counters in order to
differentiate between multiple work item executions.
* Get rid of drm_vblank_work_cancel() - this would have been pretty
difficult to actually reimplement and it occurred to me that neither
nouveau or i915 are even planning to use this function. Since there's
also no async cancel function for most of the work interfaces in the
kernel, it seems a bit unnecessary anyway.
* Get rid of to_drm_vblank_work() since we now are also able to just
pass the struct drm_vblank_work to work item callbacks anyway
Changes since v3:
* Use our own spinlocks, don't integrate so tightly with kthread_works
Changes since v2:
* Use kthread_workers instead of reinventing the wheel.
Cc: Tejun Heo <tj@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-4-lyude@redhat.com
This got me confused for a bit while looking over this code: I had been
planning on adding some blocking function calls into this function, but
seeing the irqsave/irqrestore variants of spin_(un)lock() didn't make it
very clear whether or not that would actually be safe.
So I went ahead and reviewed every single driver in the kernel that uses
this function, and they all fall into three categories:
* Driver probe code
* ->atomic_disable() callbacks
* Legacy modesetting callbacks
All of these will be guaranteed to have IRQs enabled, which means it's
perfectly safe to block here. Just to make things a little less
confusing to others in the future, let's switch over to
spin_lock_irq()/spin_unlock_irq() to make that fact a little more
obvious.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-3-lyude@redhat.com
Since we'll be allocating resources for kthread_create_worker() in the
next commit (which could fail and require us to clean up the mess),
let's simplify the cleanup process a bit by registering a
drm_vblank_init_release() action for each drm_vblank_crtc so they're
still cleaned up if we fail to initialize one of them.
Changes since v3:
* Use drmm_add_action_or_reset() - Daniel Vetter
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200627194657.156514-2-lyude@redhat.com
snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream
int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}
For hdmi-codec, we need to update struct hdmi_codec_ops,
and all its users in the same time.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87d055xxj2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713123913.34205-1-grandmaster@al2klimov.de
- assign value to register
- export finalize function and don't call explicitely from flush async
- set specific event
-----BEGIN PGP SIGNATURE-----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=+rna
-----END PGP SIGNATURE-----
Merge tag 'v5.8-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
add new functions to cmdq helper functions
- assign value to register
- export finalize function and don't call explicitely from flush async
- set specific event
* tag 'v5.8-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: cmdq: add set event function
soc: mediatek: cmdq: export finalize function
soc: mediatek: cmdq: add assign function
Link: https://lore.kernel.org/r/01399fb4-b2d0-e41b-dfd9-f2deba0ef651@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713124923.34282-1-grandmaster@al2klimov.de
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
The FRD350H54004 panel was marked as having active-high VSYNC and HSYNC
signals, which sorts-of worked, but resulted in the picture fading out
under certain circumstances.
Fix this issue by marking VSYNC and HSYNC signals active-low.
v2: Rebase on drm-misc-next
Fixes: 7b6bd84336 ("drm/panel: simple: Add support for the Frida FRD350H54004 panel")
Cc: stable@vger.kernel.org # v5.5
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716125647.10964-1-paul@crapouillou.net
drm/i915 fixes for v5.8-rc6:
- FBC w/a stride fix
- Fix use-after-free fix on module reload
- Ignore irq enabling on the virtual engines to fix device sleep
- Use GTT when saving/restoring engine GPR
- Fix selftest sort function
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87ft9t0vtt.fsf@intel.com
and stacktrace in dmesg log
* dmabuf: protect dmabuf->name with a spinlock; avoids sleeping in
atomic context
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAl8POcoACgkQaA3BHVML
eiN2fgf+KtQtM/e6xYd+u2m7PB/neOHbi77MX/YiSQ0bPzh5qIUGALzQEerOAD/D
TqxOQQEbLewJKyJZfj47e4WAbZ/Zv6Lw7jqq6FlaXY9YKFwOZhlctI87wq304/ML
M5GWExGjyjlhkAFOF2q/fv4hoB1VqXA9GI7PfXyRB8KDzvxmnc2p/I/Q7mP1aaXw
HZmTWF/p52CYVBL22fEb+InzTs/oPaFoexM6Lj9aak2eSZQQGAbJqgKjdFr+b0x7
Oq/DdGgyXg4pLyJ0ZB96uvZjxn90b1mTz5zeEss72Nz9hg7HPVHe4T8bUgug1gcK
7lShxUEGg3yTDyvqqJ0H7YZ5E2Nbqg==
=pAPP
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-07-15' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* aspeed: setup fbdev console after registering device; avoids warning
and stacktrace in dmesg log
* dmabuf: protect dmabuf->name with a spinlock; avoids sleeping in
atomic context
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715171756.GA18606@linux-uq9g
The buffer allocated is of 1024 bytes. Allocate this from
heap instead of stack.
Also remove check for stack size since we're allocating from heap
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the compute is malfunctioning or performance drops, the system admin
will use SMI (System Management Interface) tool to monitor/diagnostic what
went wrong. This patch provides an event watch interface for the user
space to register devices and subscribe events they are interested. After
registered, the user can use annoymous file descriptor's poll function
with wait-time specified and wait for events to happen. Once an event
happens, the user can use read() to retrieve information related to the
event.
VM fault event is done in this patch.
v2: - remove UNREGISTER and add event ENABLE/DISABLE
- correct kfifo usage
- move event message API to kfd_ioctl.h
v3: send the event msg in text than in binary
v4: support multiple clients
v5: move events enablement from ioctl to fd write
v6: sparse fix
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable ih CG by setting the corresponding flag.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable hdp CG and LS by setting the corresponding flags.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable mc CG and LS by setting the corresponding flags.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable athub/mmhub PG by setting the corresponding flags.
Actually the enablement is exercised by PMFW.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
navy_flounder has one VCN instance, and the work around
is to avoid smu reponse error when setting VCN1 pg for
the chip. It is preferred VCN0 and VCN1 are separated
for the pg setting so better power efficiency can be
achieved.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Plumb DC support for navy flounder through.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
navy_flounder has athub ip v2.1.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable GFX MGCG, CGCG and 3DCG for navy_flounder.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable JPEG3.0 PG and CG for navy_flounder by setting up the flags to the ASIC
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable VCN3.0 DPG for navy_flounder by setting up the flag to the ASIC
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable VCN3.0 PG and CG for navy_flounder by setting up the flags to the ASIC
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's the same with sienna_cichlid, cp fw for navy_flounder
can support WAIT_REG_MEM packet.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vcn3.0 and jpeg3.0 ip blocks for navy_flounder
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add navy_flounder to vcn family
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add gc golden setting for navy_flounder
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add callbacks to KGD for navy flounder.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KFD support for Navy Flounder.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as other navi asics.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add psp and smu block for navy_flounder with
psp firmware load type.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently skip ASD FW loading and ih reroute per
sienna_cichlid.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add SMU block for navy_flounder with direct
firmware load type.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now navy_flounder will reuse the smu11 driver_if header and ppt
functions for sienna_cichlid. Later navy_flounder can maintain
its own version if the compatibility is broken.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The athub version used for navy_flounder is v2.1.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pa_sc_tile_steering_override is only programmable for
gfx10.0/10.1/10.2, and navy_flounder has the same gfx10.3 IP
with sienna_cichlid.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The gfx version of navy_flounder is 10.3, identical to
sienna_cichlid, follow the way of sienna_cichlid.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Virtual display support for bring up and virtualization.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Navy_Flounder has the same sdma IP version with
sienna_cichlid, and it has 2 sdma controllers.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
since navy_flounder has similar gc IP version with
sienna_cichlid, follow its setting for the moment.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <Tao.Zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
navy_flounder has the same osssys IP verison with
sienna_cichlid, follow its setting.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <Tao.Zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
navy_flounder has similar gc IP version with sienna_cichlid,
follow its setting for the moment.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <Tao.Zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
navy_flounder has the same mmhub IP version with sienna_cichlid,
follow its setting.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <Tao.Zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
since navy_flounder has the same ip offset with sienna_cichlid,
follow sienna_cichlid setting for the moment.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <Tao.Zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as navi10.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as navi10.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the asic family and IP blocks for navy flounder.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently navy_flounder only supports backdoor loading type.
Will switch to psp load type when psp is ready.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sienna_cichlid has four sdma instances, but other chips don't.
So we need expand to add multiple trap event irq id in sdma
v5.2.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Skip decode_ring test in VF, because VCN in SRIOV does not
support direct register read/write.
2.Skip powergating configuration in hw fini because
VCN3.0 SRIOV doesn't support powergating.
V2: delete unneccessary white lines and refine implementation.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.In early_init and for sriov, hardcode
harvest_config=0, enc_num=1
2.sw_init/fini
alloc & free mm_table for sriov
doorbell setting for sriov
3.hw_init/fini
Under sriov, add start_sriov to config mmsch
Skip ring_test to avoid mmio in VF, but need to initialize wptr for vcn rings.
4.Implementation for vcn_v3_0_start_sriov
V2:Clean-up some uneccessary funciton declaration.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For VCN3.0 SRIOV, Guest driver needs to communicate with mmsch
to set the World Switch for MM appropriately. This patch add
the interface for mmsch_v3.0.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For gfx10 boards, except for nv12, other boards take mmio write
rather than rlcg write
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SIENNA_CICHLID SRIOV, jpeg and pgcp is not supported.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leftover of previous cleanups.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Put the common code in smu_v11_0.c instead of having one copy each.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can help to maintain clear code layer.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As it's needed in the succeeding thermal irq setting.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are needed for temp1/2/3 related hwmon interfaces.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are needed for temp1/2/3 related hwmon interfaces.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The LCLK dpm table setup should be performed in .update_pcie_parameters().
Otherwise, the updated GenSpeed and LaneCount information will be lost.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can also help to maintain clear code layer.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leftover of previous performance level setting cleanups.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By calling the target APIs directly.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before and after setting gfx clock soft max/min frequency.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the common smu_v11_0_set_soft_freq_limited_range.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As a common performance level setting API is used. Then these
ASIC specific APIs are not needed any more.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As a common performance level setting API is used. Then these
ASIC specific APIs are not needed any more.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As a common performance level setting API is used. Then these
ASIC specific APIs are not needed any more.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So that it can be more widely shared around SMU v11 ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Preparing for coming code sharing around performance level
setting.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is used to cache the clock frequencies for all UMD pstates.
So that we do not need to calculate from scratch on every UMD
pstate switch.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cache all clocks levels for every dpm table. They are needed
by other APIs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cache all clocks levels for every dpm table. They are needed
by other APIs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Preparing for coming code sharing around performance level
setting.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Maximum the code sharing around smu V11.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These members can help to cache the clock frequencies for all
dpm levels. Then simplifying the code for dpm level switching
is possible.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we are in RAS triggered situation and
BACO isn't support, emergency restart is needed,
and this code is only needed for some specific
cases(vega20 with given smu fw version).
After we add smu mode1 reset for sienna cichlid, we
need to share AMD_RESET_METHOD_MODE1 with psp mode1 reset,
so in amdgpu_device_gpu_recover, we need differentiate
which mode1 reset we are using, then decide if it's
a full reset and then decide if emergency restart is needed,
the logic will become much more complex.
After discussion with Hawking, move emergency restart logic
to an independent function.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- fix some styling issues
- fixes for kernel-doc type
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to ensure that the kernel context is using the permanently pinned
HWSP so that we can always submit a pm request from any context. By
construction, the engine->kernel_context should only be using the
engine->status_page.vma so let's assert that is still true when we have
to submit a request for parking the engine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714114419.28713-1-chris@chris-wilson.co.uk
"u64 *wptr" points to the the wptr value in write back buffer and
"*wptr = (*wptr) >> 2;" results in the value being overwritten each time
when ->get_wptr() is called.
umr uses /sys/kernel/debug/dri/0/amdgpu_ring_sdma0 to get rptr/wptr and
decode ring content and it is affected by this issue.
fix and simplify the logic similar as sdma_v4_0_ring_get_wptr().
v2: fix for sdma5.2 as well
v3: drop sdma 5.2 changes for 5.8 and stable
Suggested-by: Le Ma <le.ma@amd.com>
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
I consulted Cai Land(Chuntian.Cai@amd.com), he told me corresponding smc
message name to fSMC_MSG_SetWorkloadMask() is
"PPSMC_MSG_ActiveProcessNotify" in firmware code of Renoir.
Strange though it may seem, but it's a fact.
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Failing to allocate a transfer function during stream construction leads
to a null pointer dereference
[How]
Handle the failed allocation by failing the stream construction
Cc: stable@vger.kernel.org
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
amdgpu_dm->backlight_caps is for single eDP only. the caps are upddated
for very connector. Real eDP caps will be overwritten by other external
display. For OLED panel, caps->aux_support is set to 1 for OLED pnael.
after external connected, caps+.aux_support is set to 0. This causes
OLED backlight adjustment not work.
[How]
within update_conector_ext_caps, backlight caps will be updated only for
eDP connector.
Cc: stable@vger.kernel.org
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prevents a warning in the MST create connector case.
v2: create global fake encoders rather per connector fake encoders
to avoid running out of encoder indices.
v3: use the actual number of crtcs on the asic rather than the max
to conserve encoders.
v4: v3 plus missing hunk I forgot to git add.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1108
Fixes: c6385e503a ("drm/amdgpu: drop legacy drm load and unload callbacks")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.7.x
Remove signaled jobs from job list and ensure the
job was indeed preempted.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During preemption test for gfx10, it uses kiq to trigger
gfx preemption, which would result in race condition
with flushing TLB for kiq.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The "stream" pointer can't be NULL and it's dereferenced on the line
before so the check doesn't make sense.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
"u64 *wptr" points to the the wptr value in write back buffer and
"*wptr = (*wptr) >> 2;" results in the value being overwritten each time
when ->get_wptr() is called.
umr uses /sys/kernel/debug/dri/0/amdgpu_ring_sdma0 to get rptr/wptr and
decode ring content and it is affected by this issue.
fix and simplify the logic similar as sdma_v4_0_ring_get_wptr().
v2: fix for sdma5.2 as well
Suggested-by: Le Ma <le.ma@amd.com>
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
to easily add new debugfs file w/o changing the hardcoded list count.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I consulted Cai Land(Chuntian.Cai@amd.com), he told me corresponding smc
message name to fSMC_MSG_SetWorkloadMask() is
"PPSMC_MSG_ActiveProcessNotify" in firmware code of Renoir.
Strange though it may seem, but it's a fact.
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
CRC capture doesn't work when the active plane count is 0 since we
currently tie both vblank and pageflip interrupts to active_plane_count
greater than 0.
[How]
The frontend is what generates the vblank interrupts while the backend
is what generates pageflip interrupts. Both have a requirement for
the CRTC to be active, so control the overall interrupt state based
on that instead.
Pageflip interrupts need to be enabled based on active plane count, but
we actually rely on power gating to take care of disabling the interrupt
for us on pipes that can be power gated.
For pipes that can't be power gated it's still fine to leave it enabled
since the interrupt only triggers after the address has been written
to that particular pipe - which we won't be doing without an active
plane.
The issue we had before with this setup was that we couldn't force
the state back on. We were essentially manipulating the refcount
to enable or disable as needed in a two pass approach.
However, there is a function that solves this problem more elegantly:
amdgpu_irq_update() will unconditionally call the set based on what it
thinks the current enablement state is.
This leaves two future TODO items for our IRQ handling:
- Disabling IRQs in commit tail instead of atomic commit
- Mapping the pageflip interrupt to VUPDATE or something that's tied to
the frontend instead of the backend since the mapping to CRTC is not
correct
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When enabling the debugfs for CRC capture we hit assertions caused by
register address and field masks and shifts missing.
[How]
We want these registers programmed, so add in the SRI/SF entries for
this register.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Failing to allocate a transfer function during stream construction leads
to a null pointer dereference
[How]
Handle the failed allocation by failing the stream construction
Cc: stable@vger.kernel.org
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Move code for parsing debugfs input into an array of int parameters by
specifying the max number of expected parameters
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Our validation is a known mess with actual validation mixed with
topology configuration. This change makes sure topolgical validation is
completed before any topology changes are made so we do not run into
issues where we merge and split a pipe over the course of a single call.
v2: Squash in compilation fix
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
new calculated dispclk, dppclk are stored in
context->bw_ctx.bw.dcn.clk.dispclk_khz, dppclk_khz. Current dispclk,
dppclk are from dc->clk_mgr->clks.dispclk_khz. dcn_validate_bandwidth
compute new dispclk, dppclk. dispclk will put in use after
optimize_bandwidth when ramp_up_dispclk_with_dpp is called. There are
two places for dppclk be put in use. One location is the same as the
location as dispclk. Another is within update_dchubp_dpp which happens
between pre_bandwidth and optimize_bandwidth. dppclk updated within
update_dchubp_dpp will cause new clock values of dispclk and dppclk not
be in use at the same time. when clocks are decreased, this may cause
dppclk is lower than current configuration and let pipe stuck. for
example, eDP + external dp, change resolution of DP from 1920x1080x144hz
to 1280x960x60hz.
before change: dispclk = 337889 dppclk = 337889
change mode, dcn_validate_bandwidth calculate
dispclk = 143122 dppclk = 143122
update_dchubp_dpp be executed before dispclk be updated,
dispclk = 337889, but dppclk use new value dispclk /2 =
168944. this will cause pipe pstate warning issue.
[How]
between pre_bandwidth and optimize_bandwidth, while dispclk is going to
be decreased, keep dppclk = dispclk
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
amdgpu_dm->backlight_caps is for single eDP only. the caps are upddated
for very connector. Real eDP caps will be overwritten by other external
display. For OLED panel, caps->aux_support is set to 1 for OLED pnael.
after external connected, caps+.aux_support is set to 0. This causes
OLED backlight adjustment not work.
[How]
within update_conector_ext_caps, backlight caps will be updated only for
eDP connector.
Cc: stable@vger.kernel.org
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
when ppt disabled, the watermark doesn't get fine tune causing
underflow.
[How]
It is a temporary solution to reduce sr_xxx_time by 3 us when ppt
disable.
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In headless systems, if set mode is not called, hardware will not be
powered down on boot, causing HW/SW discrepancies. Powering down
hardware on boot will ensure SW state is accurate.
[HOW]
Set a timer callback on boot for 10 seconds. If set mode is not called
within that time, power down hardware. Otherwise, do not power down.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A small mistake
Signed-off-by: chen gong <curry.gong@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently we're failing to recalculate the gen9 FBC w/a stride
unless something more drastic than just the modifier itself has
changed. This often leaves us with FBC enabled with the linear
fbdev framebuffer without the w/a stride enabled. That will cause
an immediate underrun and FBC will get promptly disabled.
Fix the problem by checking if the w/a stride is about to change,
and go through the full dance if so. This part of the FBC code
is still pretty much a disaster and will need lots more work.
But this should at least fix the immediate issue.
v2: Deactivate FBC when the modifier changes since that will
likely require resetting the w/a CFB stride
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711080336.13423-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 0428ab013f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The danger in switching at random upon intel_context_pin is that the
context may still actually be inflight, as it will not be scheduled out
until a context switch after it is complete -- that may be a long time
after we do a final intel_context_unpin.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2118
Fixes: 6d06779e86 ("drm/i915: Load balancing across a virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.3+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713160549.17344-1-chris@chris-wilson.co.uk
(cherry picked from commit 90a987205c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We do not use the virtual engines for interrupts (they have physical
components), but we do use them to decouple the fence signaling during
submission. Currently, when we submit a completed request, we try to
enable the interrupt handler for the virtual engine, but we never disarm
it. A quick fix is then to mark the irq as enabled, and it will then
remain enabled -- and this prevents us from waking the device and never
letting it sleep again.
Fixes: f8db4d051b ("drm/i915: Initialise breadcrumb lists on the virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711203236.12330-1-chris@chris-wilson.co.uk
(cherry picked from commit 4fe6abb8f5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
MI_STORE_REGISTER_MEM and MI_LOAD_REGISTER_MEM need to know which
translation to use when saving restoring the engine general purpose
registers to and from the GT scratch. Since GT scratch is mapped to
ggtt, we need to set an additional bit in the command to use GTT.
Fixes: daed3e4439 ("drm/i915/perf: implement active wait for noa configurations")
Suggested-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709224504.11345-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit e43ff99c8d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Both cmp_u32 and cmp_u64 are comparing the pointers instead of the value
at those pointers. This will result in incorrect/unsorted list. Fix it
by deferencing the pointers before comparison.
Fixes: 4ba74e53ad ("drm/i915/selftests: Verify frequency scaling with RPS")
Fixes: 8757797ff9 ("drm/i915/selftests: Repeat the rps clock frequency measurement")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709154931.23310-1-sudeep.holla@arm.com
(cherry picked from commit 2196dfea89)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The error code needs to be set on this path. It currently returns
success.
Fixes: ed2690a9ca ("drm/i915/selftest: Check that GPR are restored across noa_wait")
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714143652.GA337376@mwanda
Currently we're failing to recalculate the gen9 FBC w/a stride
unless something more drastic than just the modifier itself has
changed. This often leaves us with FBC enabled with the linear
fbdev framebuffer without the w/a stride enabled. That will cause
an immediate underrun and FBC will get promptly disabled.
Fix the problem by checking if the w/a stride is about to change,
and go through the full dance if so. This part of the FBC code
is still pretty much a disaster and will need lots more work.
But this should at least fix the immediate issue.
v2: Deactivate FBC when the modifier changes since that will
likely require resetting the w/a CFB stride
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711080336.13423-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
DG1 has the south engine display on the same PCI device. Ideally we
could use HAS_PCH_SPLIT(), but that macro is misused all across the
code base to rather signify a range of gens. So add a fake one for DG1
to be used where needed.
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713182321.12390-6-lucas.demarchi@intel.com
Bspec asks us to remove the special programming of the
SHPD_FILTER_CNT register which we have been doing since CNP+.
Bspec: 49305
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713182321.12390-5-lucas.demarchi@intel.com
DG1 has master unit interrupt register which is used to indicate the
correct source of interrupt.
v2: fix coding style on register definition
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Daniele Spurio Ceraolo <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713182321.12390-4-lucas.demarchi@intel.com
Bspec: 33617, 33617
v2: s/intel_dg1_info/dg1_info/ as done for other platforms before and
try to shut up compiler about ununsed variable that we know
shouldn't be used (Lucas)
v3: replace explicit attribute with __maybe_unused (Lucas)
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Vanshidhar Konda <vanshidhar.r.konda@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713182321.12390-2-lucas.demarchi@intel.com
Gives us proper nonblocking support for free, and a pile of other
things. The tilcdc code is simply old enough that it was never
converted over, but was stuck forever with the copypasta from when it
was initially merged.
The riskiest thing with this conversion is maybe that there's an issue
with the vblank handling or vblank event handling, which will upset
the modern commit support in atomic helpers. But from a cursory review
drm_crtc_vblank_on/off is called in the right places, and the event
handling also seems to exist (albeit with much hand-rolling and
probably some races, could perhaps be converted over to
drm_crtc_arm_vblank_event without any real loss).
Motivated by me not having to hand-roll the dma-fence annotations for
this.
v2: Clear out crtc_state->event when we're handling the event, to
avoid upsetting the helpers (reported by Jyri).
v3: Also send out even whent the crtc is getting disabled. Tilcdc looks a
bit like conversion to simple display helpers would work out really
nice.
Tested-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708142050.530240-1-daniel.vetter@ffwll.ch
The prepare and commit helpers for G200WB devices control the BMC.
Rename them accordingly. While at it, also change the passed value's
type to struct mga_device and remove some type upcasting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-7-tzimmermann@suse.de
Modifying the <syncrst> field in mgag200_{enable,disable}_display()
makes the code more readable. Also clear the <asyncrst> field to enable
the display. The other bits in SEQ0 are unused, so no functional changes
are made.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-6-tzimmermann@suse.de
Of the DPMS code, only ON and OFF states are used. Simplify mode setting
by moving both into separate functions and removing the rest.
The original code busy waited in the middle of updating the screen state
in SEQ1. To simplify the procedure, the new code busy waits first and then
updates SEQ1 in one chunk.
The DPMS code also set the LUT before enabling the screen. The patch moves
this code into the simple-display pipe's enable function.
v2:
* comment on SEQ1 updates in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-5-tzimmermann@suse.de
The simple pipe's disable function disables the screen by calling
mgag200_disable_screen(). The simple pipe's enable function enables the
screen by calling mgag200_enable_display().
During modeset operations the screen is off and remains off. It's only
enabled after the modeset has been completed. Therefore remove all code
that sets or clears the <scroff> field while in modeset.
The related code also modifies the <syncrst> field in SEQ0. For now, keep
this code in place.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-4-tzimmermann@suse.de
The prepare function write-protects several registers that it doesn't
even touch. Removed the related code.
The code for unprotecting registers also clears VINT interrupts. Both
is now done once during initialization.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707082411.6583-2-tzimmermann@suse.de
The assignment of metadata overwrote the new display resolution values,
hence we'd miss the size actually changed and wouldn't redefine the
surface. This would then lead to command buffer error when trying to
update the screen target (due to the size mismatch), and result in a
VM with black screen.
Fixes: 504901dbb0 ("drm/vmwgfx: Refactor surface_define to use vmw_surface_metadata")
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Cc: stable@vger.kernel.org
According to the DP spec a DPTX must support vswing/pre-emphasis
up to and including level 2. Level 3 is optional (actually DP 1.4a
seems to make even level 3 mandatory for HBR2/3, while leaving it
optional for RBR/HBR1).
WARN if out encoders' .voltage_max()/.preemph_max() return
an illegal value.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709145845.18118-1-ville.syrjala@linux.intel.com
So far, max dot clock rate for MST mode rely on physcial
bandwidth limitation. It would caused compatibility issue
if source display resolution exceed MST hub output ability.
For example, source DUT had DP 1.2 output capability.
And MST docking just support HDMI 1.4 spec. When a HDMI 2.0
monitor connected. Source would retrieve EDID from external
and get max resolution 4k@60fps. DP 1.2 can support 4K@60fps
because it did not surpass DP physical bandwidth limitation.
Do modeset to 4k@60fps, source output display data but MST
docking can't output HDMI properly due to this resolution
already over HDMI 1.4 spec.
Refer to commit <fcf463807596> ("drm/dp_mst: Use full_pbn
instead of available_pbn for bandwidth checks").
Source driver should refer to full_pbn to evaluate sink
output capability. And filter out the resolution surpass
sink output limitation.
Changes since v1:
* Using mgr->base.lock to protect full_pbn.
Changes since v2:
* Add ctx lock.
Changes since v3:
* s/intel_dp_mst_mode_clock_exceed_pbn_bandwidth/
intel_dp_mst_mode_clock_exceeds_pbn_bw/
* Use the new drm_connector_helper_funcs.mode_valid_ctx to properly pipe
down the drm_modeset_acquire_ctx that the probe helpers are using, so
we can safely grab &mgr->base.lock without deadlocking
Changes since v4:
* Move drm_dp_calc_pbn_mode(mode->clock, bpp, false) > port->full_pbn
check
* Fix the bpp we use in drm_dp_calc_pbn_mode()
* Drop leftover (!mgr) check
* Don't check for if full_pbn is unset. To be clear - it _can_ be unset,
but if it is then it's certainly a bug in DRM or a non-compliant sink
as full_pbn should always be populated by the time we call
->mode_valid_ctx.
We should workaround non-compliant sinks with full_pbn=0, but that
should happen in the DP MST helpers so we can estimate the full_pbn
value as best we can.
Tested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Co-developed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713170746.254388-3-lyude@redhat.com
This is just an atomic version of mode_valid, which is intended to be
used for situations where a driver might need to check the atomic state
of objects other than the connector itself. One such example is with
MST, where the maximum possible bandwidth on a connector can change
dynamically irregardless of the display configuration.
Changes since v1:
* Use new drm logging functions
* Make some corrections in the mode_valid_ctx kdoc
* Return error codes or 0 from ->mode_valid_ctx() on fail, and store the
drm_mode_status in an additional function parameter
Changes since v2:
* Don't accidentally assign ret to mode->status on success, or we'll
squash legitimate mode validation results
* Don't forget to assign MODE_OK to status in drm_connector_mode_valid()
if we have no callbacks
* Drop leftover hunk in drm_modes.h around enum drm_mode_status
Changes since v3:
* s/return ret/return 0/ in drm_mode_validate_pipeline()
* Minor cleanup in drm_connector_mode_valid()
Tested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713170746.254388-2-lyude@redhat.com
Preempt-to-busy introduces various fascinating complications in that the
requests may complete as we are unsubmitting them from HW. As they may
then signal after unsubmission, we may find ourselves having to cleanup
the signaling request from within the signaling callback. This causes us
to recurse onto the same i915_request.lock.
However, if the request is already signaled (as it will be before we
enter the signal callbacks), we know we can skip the signaling of that
request during submission, neatly evading the spinlock recursion.
unsubmit(ve.rq0) # timeslice expiration or other preemption
-> virtual_submit_request(ve.rq0)
dma_fence_signal(ve.rq0) # request completed before preemption ack
-> submit_notify(ve.rq1)
-> virtual_submit_request(ve.rq1) # sees that we have completed ve.rq0
-> __i915_request_submit(ve.rq0)
[ 264.210142] BUG: spinlock recursion on CPU#2, sample_multi_tr/2093
[ 264.210150] lock: 0xffff9efd6ac55080, .magic: dead4ead, .owner: sample_multi_tr/2093, .owner_cpu: 2
[ 264.210155] CPU: 2 PID: 2093 Comm: sample_multi_tr Tainted: G U
[ 264.210158] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWR1.R00.X212.B01.1909060036 09/06/2019
[ 264.210160] Call Trace:
[ 264.210167] dump_stack+0x98/0xda
[ 264.210174] spin_dump.cold+0x24/0x3c
[ 264.210178] do_raw_spin_lock+0x9a/0xd0
[ 264.210184] _raw_spin_lock_nested+0x6a/0x70
[ 264.210314] __i915_request_submit+0x10a/0x3c0 [i915]
[ 264.210415] virtual_submit_request+0x9b/0x380 [i915]
[ 264.210516] submit_notify+0xaf/0x14c [i915]
[ 264.210602] __i915_sw_fence_complete+0x8a/0x230 [i915]
[ 264.210692] i915_sw_fence_complete+0x2d/0x40 [i915]
[ 264.210762] __dma_i915_sw_fence_wake+0x19/0x30 [i915]
[ 264.210767] dma_fence_signal_locked+0xb1/0x1c0
[ 264.210772] dma_fence_signal+0x29/0x50
[ 264.210871] i915_request_wait+0x5cb/0x830 [i915]
[ 264.210876] ? dma_resv_get_fences_rcu+0x294/0x5d0
[ 264.210974] i915_gem_object_wait_fence+0x2f/0x40 [i915]
[ 264.211084] i915_gem_object_wait+0xce/0x400 [i915]
[ 264.211178] i915_gem_wait_ioctl+0xff/0x290 [i915]
Fixes: 22b7a426bb ("drm/i915/execlists: Preempt-to-busy")
References: 6d06779e86 ("drm/i915: Load balancing across a virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: "Nayana, Venkata Ramana" <venkata.ramana.nayana@intel.com>
Cc: <stable@vger.kernel.org> # v5.4+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713141636.29326-1-chris@chris-wilson.co.uk
The danger in switching at random upon intel_context_pin is that the
context may still actually be inflight, as it will not be scheduled out
until a context switch after it is complete -- that may be a long time
after we do a final intel_context_unpin.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2118
Fixes: 6d06779e86 ("drm/i915: Load balancing across a virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.3+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713160549.17344-1-chris@chris-wilson.co.uk
clang static analysis flags this error
sil-sii8620.c:184:2: warning: Undefined or garbage value
returned to caller [core.uninitialized.UndefReturn]
return ret;
^~~~~~~~~~
sii8620_readb calls sii8620_read_buf.
sii8620_read_buf can return without setting its output
pararmeter 'ret'.
So initialize ret.
Fixes: ce6e153f41 ("drm/bridge: add Silicon Image SiI8620 driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200712152453.27510-1-trix@redhat.com
There is an error condition where err is not being set and an uninitialized
garbage value in err is being returned. Fix this by assigning err to an
appropriate error return value before taking the error exit path.
Addresses-Coverity: ("Uninitialized scalar value")
Fixes: ed2690a9ca ("drm/i915/selftest: Check that GPR are restored across noa_wait")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713142551.423649-1-colin.king@canonical.com
Now that TTM is fixed up we can finally stop that nonsense.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Link: https://patchwork.freedesktop.org/patch/375620
Stop touching the backend private pointer alltogether and
make sure we never put the same mem twice by.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Link: https://patchwork.freedesktop.org/patch/375613/
We do not use the virtual engines for interrupts (they have physical
components), but we do use them to decouple the fence signaling during
submission. Currently, when we submit a completed request, we try to
enable the interrupt handler for the virtual engine, but we never disarm
it. A quick fix is then to mark the irq as enabled, and it will then
remain enabled -- and this prevents us from waking the device and never
letting it sleep again.
Fixes: f8db4d051b ("drm/i915: Initialise breadcrumb lists on the virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711203236.12330-1-chris@chris-wilson.co.uk
If something has gone awry with the CSB processing, we need to pause,
unwind and restart the request submission and event processing. However,
currently we skip the engine reset if we raise an error but discover no
active context, in the mistaken belief that it was merely a glitch in
the matrix. The glitches are real enough, and we do need to unwind even
if the engine appears idle (as it has gone permanently idle!) The
simplest way to unwind and recover is simply do the engine reset, which
should be very fast and _safe_ as nothing is active.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200711091349.28865-1-chris@chris-wilson.co.uk
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/371172/
Signed-off-by: Christian König <christian.koenig@amd.com>
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function
returns the number of the created entries in the DMA address space.
However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and
dma_unmap_sg must be called with the original number of the entries
passed to the dma_map_sg().
struct sg_table is a common structure used for describing a non-contiguous
memory buffer, used commonly in the DRM and graphics subsystems. It
consists of a scatterlist with memory pages and DMA addresses (sgl entry),
as well as the number of scatterlist entries: CPU pages (orig_nents entry)
and DMA mapped pages (nents entry).
It turned out that it was a common mistake to misuse nents and orig_nents
entries, calling DMA-mapping functions with a wrong number of entries or
ignoring the number of mapped entries returned by the dma_map_sg()
function.
To avoid such issues, lets use a common dma-mapping wrappers operating
directly on the struct sg_table objects and use scatterlist page
iterators where possible. This, almost always, hides references to the
nents and orig_nents entries, making the code robust, easier to follow
and copy/paste safe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/371142/
Signed-off-by: Christian König <christian.koenig@amd.com>
This change expands the coverage for the IGT kms_cursor_crc test, where
the size varies between 64 and 512 for a square cursor. With this, in
addition to the cursor 64x64, this patch enables the test of cursors with
sizes: 128x128, 256x256, and 512x512.
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200710160313.xjoz6ereyma5vkc3@smtp.gmail.com
Prevents a warning in the MST create connector case.
v2: create global fake encoders rather per connector fake encoders
to avoid running out of encoder indices.
v3: use the actual number of crtcs on the asic rather than the max
to conserve encoders.
v4: v3 plus missing hunk I forgot to git add.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1108
Fixes: c6385e503a ("drm/amdgpu: drop legacy drm load and unload callbacks")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a DRM_ERROR error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove signaled jobs from job list and ensure the
job was indeed preempted.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During preemption test for gfx10, it uses kiq to trigger
gfx preemption, which would result in race condition
with flushing TLB for kiq.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleanup of phase1 suspend code to reduce unnecessary indentation.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As designed the common code shared among all smu v11 ASCIs go to
smu_v11_0.c. This helps to maintain clear code layers.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This helps to maintain clear code layers and drop unnecessary
parameter.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This helps to maintain clear code layers and drop unnecessary
parameter.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As designed the common code shared among all smu v11 ASCIs go to
smu_v11_0.c. This helps to maintain clear code layers.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean code by dropping unnecessary ones.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By moving them into asic specific file. Since they are really ASIC
specific.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By calling the target API(asic specific) directly.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By calling the target APIs directly.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update sienna_cichlid driver if header and related files.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This seemed a typo.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid s3 faild at the first cycle on renoir platform, it needs to
revert this patch:
drm/amd/display: add mechanism to skip DCN init
Signed-off-by: changfeng <Changfeng.Zhu@amd.com>
Ackedy-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN3 has two gamut remap matrices. When using CSC adjustment the CM
remap is set to bypass and MPCC remap is used. However to bypass CM
some state in the context is modified and not restored correctly
resulting in subsequent calls to disable MPCC remap as well.
[How]
Fix logic for save/restore of remap enable flag when programming MPCC
remap matrix.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Soft hangs occur when FreeSync is engaged since we utilize VUPDATE
(which doesn't fire when holding the pipe lock) to send back vblank
events when FreeSync is active.
[How]
The alternative (working) interrupt source for this mechanism is
VUPDATE_NO_LOCK. We already use this all other DCN revisions so align
dcn30 with those as well.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove some unused ASIC check logic.
Remove some definition of amdgpu_device which only used by
the removed ASIC check logic.(V2)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's impossible to debug shader hangs with soft recovery.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We try not to assume that we captured any information, and so have to
check that error->gt exists before reporting. This check was missed in
err_print_capabilities, so lets break up the capability info and push it
into the GT dump.
We are still a long way from yamlifying this output!
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 792592e72a ("drm/i915: Move the engine mask to intel_gt_info")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200710193239.5419-1-chris@chris-wilson.co.uk
Nouveau currently only supports mapping PAGE_SIZE sized pages of system
memory when shared virtual memory (SVM) is enabled. Use the new
hmm_pfn_to_map_order() function to support mapping system memory pages
that are PMD_SIZE.
Link: https://lore.kernel.org/r/20200701225352.9649-5-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The nvif_object_ioctl() method NVIF_VMM_V0_PFNMAP wasn't correctly setting
the hardware specific GPU page table entries for 2MB sized pages. Fix this
by adding functions to set and clear PD0 GPU page table entries.
Link: https://lore.kernel.org/r/20200701225352.9649-4-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The SVM page fault handler groups faults into a range of contiguous
virtual addresses and requests hmm_range_fault() to populate and return
the page frame number of system memory mapped by the CPU. In preparation
for supporting large pages to be mapped by the GPU, process faults one
page at a time. In addition, use the hmm_range default_flags to fix a
corner case where the input hmm_pfns array is not reinitialized after
hmm_range_fault() returns -EBUSY and must be called again.
Link: https://lore.kernel.org/r/20200701225352.9649-2-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708121604.14292-1-grandmaster@al2klimov.de
It doesn't hurt to add the bridge in the global bridge list also for
platform specific dw-hdmi drivers which are based on the component
framework. This can be achieved by moving the drm_bridge_add() function
call from dw_hdmi_probe() to __dw_hdmi_probe(). A counterpart movement
for drm_bridge_remove() is also needed then. Moreover, since drm_bridge_add()
initializes &bridge->hpd_mutex, this may help those platform specific
dw-hdmi drivers(based on the component framework) avoid accessing the
uninitialized mutex in drm_bridge_hpd_notify() which is called in
dw_hdmi_irq(). Putting drm_bridge_add() in __dw_hdmi_probe() just before
it returns successfully should bring no logic change for platforms based
on the DRM bridge API, which is a good choice from safety point of view.
Also, __dw_hdmi_probe() is renamed to dw_hdmi_probe() since dw_hdmi_probe()
does nothing else but calling __dw_hdmi_probe(). Similar renaming applies
to the __dw_hdmi_remove()/dw_hdmi_remove() pair.
Fixes: ec971aaa67 ("drm: bridge: dw-hdmi: Make connector creation optional")
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Dariusz Marcinkiewicz <darekm@google.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1594260156-8316-2-git-send-email-victor.liu@nxp.com
It's unnecessary to cleanup the i2c adapter and the ddc pointer in
the bailout path of __dw_hdmi_probe(), since the adapter is not
added and the ddc pointer is not set.
Fixes: a23d6265f0 ("drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function")
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Dariusz Marcinkiewicz <darekm@google.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: dri-devel@lists.freedesktop.org
Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1594260156-8316-1-git-send-email-victor.liu@nxp.com
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709184755.24798-1-grandmaster@al2klimov.de
If the HW throws a curve ball and reports either en event before it is
possible, or just a completely impossible event, we have to grin and
bear it. The first few events, we will likely not notice as we would be
expecting some event, but as soon as we stop expecting an event and yet
they still keep coming, then we enter into undefined state territory.
In which case, bail out, stop processing the events, and reset the
engine and our set of queued requests to recover.
The sporadic hangs and warnings will continue to plague CI, but at least
system stability should not be compromised.
v2: Commentary and force the reset-on-error.
v3: Customised user facing message for forced resets from internal errors.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2045
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200710133125.30194-1-chris@chris-wilson.co.uk
Perf implements a GPU delay (noa_wait) by looping until the CS timestamp
has passed a certain point. This use MI_MATH and the general purpose
registers of the user's context, and since it is clobbering the user
state it must carefully save and restore the user's data around the
noa_wait. We can verify this by loading some values in the GPR that we
know will be clobbered by the noa_wait, and then inspecting the GPR after
the noa_wait completes and confirming that they have been restored.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709224504.11345-2-chris@chris-wilson.co.uk
MI_STORE_REGISTER_MEM and MI_LOAD_REGISTER_MEM need to know which
translation to use when saving restoring the engine general purpose
registers to and from the GT scratch. Since GT scratch is mapped to
ggtt, we need to set an additional bit in the command to use GTT.
Fixes: daed3e4439 ("drm/i915/perf: implement active wait for noa configurations")
Suggested-by: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709224504.11345-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
from Ville and 4 patches from Chris on GEM: 1 fixing a debugfs
panic and others fixing vma construction and pin under vm->mutex.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl8GGNgACgkQ+mJfZA7r
E8rHZgf+O8kH/z0YluMQYjfQVQhgSuYUCBeYIMUWEuEWDc9iiDcgr77n5jmeb/ui
J8L6J3k3Ob/AktZr+r0ReTN36NPVAa86NnQ42Qt95GZmtuoCVRT1oYe94VfUFS8v
2Z8ppXZEcoOP9/W94z7h2UH0bhKeEPCvlO39HvjOFAfV9XjNses1YHye+47flriF
dq9lfhnCf4Qe37+tqQeNy30wBpZGsizOb/xoxO1Zd4WxMKtO1GRRNJqtH3Ichly1
iNp2JrbsRk5oUQppLPe3tYyHpFJiEU98HNCfLoPaLRW+QzLl9sqC6Pd/dJnbXpza
XFy4jt99vYJtNk1PlwFbDTQzr6Xynw==
=Tuz8
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2020-07-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
One display's fbc patch fixing fence_y_offset calculation
from Ville and 4 patches from Chris on GEM: 1 fixing a debugfs
panic and others fixing vma construction and pin under vm->mutex.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708190654.GA3924867@intel.com
-----BEGIN PGP SIGNATURE-----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=a46H
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-fixes-5.8' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes for Linux 5.8
This include fixup for cmdq, mmsys, visibility checking and some refinement.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707153944.604-1-chunkuang.hu@kernel.org
Since the aliasing-ppgtt remains the default for gen6/gen7, it is worth
optimising the ppgtt allocation for it. In this case, we do not need to
flush the GGTT page directories entries as they are fixed during setup.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709190111.5492-1-chris@chris-wilson.co.uk
HOBL means hours of battery life, it is a power-saving feature
were supported motherboards can use a special voltage swing table
that uses less power.
So here parsing the VBT to check if this feature is supported.
BSpec: 20150
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708205512.21625-3-jose.souza@intel.com
Apparently there are EDIDs in the wild with multiple DispID extension
blocks. Iterate through them all.
In one particular case the tile information is specicied in the
second DispID ext block, and since the current parser only looks
at the first DispID ext block we don't notice that we're dealing
with a tiled display.
While at it change a few functions to return void since we have
no use for the errno.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/27
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527130310.27099-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Apparently EDIDs with multiple DispID ext blocks is a thing, so prepare
for iterating through multiple ext blocks of the same type by
passing the starting ext block index to drm_find_edid_extension(). Well
also have drm_find_edid_extension() update the index to point to the
next ext block on success. Thus we should be able to call
drm_find_edid_extension() in loop.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527130310.27099-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
It's impossible to debug shader hangs with soft recovery.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
clang static analysis flags this error
drivers/gpu/drm/radeon/ci_dpm.c:5652:9: warning: Use of memory after it is freed [unix.Malloc]
kfree(rdev->pm.dpm.ps[i].ps_priv);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/radeon/ci_dpm.c:5654:2: warning: Attempt to free released memory [unix.Malloc]
kfree(rdev->pm.dpm.ps);
^~~~~~~~~~~~~~~~~~~~~~
problem is reported in ci_dpm_fini, with these code blocks.
for (i = 0; i < rdev->pm.dpm.num_ps; i++) {
kfree(rdev->pm.dpm.ps[i].ps_priv);
}
kfree(rdev->pm.dpm.ps);
The first free happens in ci_parse_power_table where it cleans up locally
on a failure. ci_dpm_fini also does a cleanup.
ret = ci_parse_power_table(rdev);
if (ret) {
ci_dpm_fini(rdev);
return ret;
}
So remove the cleanup in ci_parse_power_table and
move the num_ps calculation to inside the loop so ci_dpm_fini
will know how many array elements to free.
Fixes: cc8dbbb4f6 ("drm/radeon: add dpm support for CI dGPUs (v2)")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
RENOIR loads dmub fw not dmcu, check dmcu only will prevent loading iram,
it breaks backlight control.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208277
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
TMR is required to be destoried with GFX_CMD_ID_DESTROY_TMR while the
system goes to suspend. Otherwise, PSP may return the failure state
(0xFFFF007) on Gfx-2-PSP command GFX_CMD_ID_SETUP_TMR after do multiple
times suspend/resume.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Unload ASD function in suspend phase.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Both cmp_u32 and cmp_u64 are comparing the pointers instead of the value
at those pointers. This will result in incorrect/unsorted list. Fix it
by deferencing the pointers before comparison.
Fixes: 4ba74e53ad ("drm/i915/selftests: Verify frequency scaling with RPS")
Fixes: 8757797ff9 ("drm/i915/selftests: Repeat the rps clock frequency measurement")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200709154931.23310-1-sudeep.holla@arm.com
As today those 2 WAs have different implementation between TGL and DG1
WA pages but checking the HSD it is clear that DG1 implementation
should be used for both, also to do so is easier as we just need to
extend WA 1407928979 to B* stepping.
Both WAs are need to fix some possible render corruptions.
DG1 initial patches were not merged yet, as soon it is this WAs should
be applied to DG1 as well.
BSpec: 53508
BSpec: 52890
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708212947.40178-1-jose.souza@intel.com
Some platforms apply the FBC w/as in .init_clock_gating(), some
in fbc_activate(). Move them all to .init_clock_gating() for
consistentce. Also safer since we don't have to worry about the
RMWs clashing with any other runtime use of the same registers.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708131223.9519-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
.get_modes() is supposed to return the number of modes added to the
probed_modes list (not that anyone actually checks for anything
except zero vs. not zero). Let's do that. Also switch over to using
intel_connector_update_modes() instead of hand rolling it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108181242.13650-8-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
With SDVO the pipe config pixel_multiplier only concerns itself with the
data on the SDVO bus. Any HDMI specific pixel repeat must be handled by
the SDVO device itself. To do that simply configure the SDVO pixel
replication factor appropriately. We already set up the infoframe PRB
values correctly via the infoframe helpers.
There is no cap we can check for this. The spec says that 1X,2X,4X are
mandatory, anything else is optional. 1X and 2X are all we need so
we should be able to assume they work.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108181242.13650-7-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
The code assumes that DRM_MODE_FLAG_DBLCLK means that we enable the
pixel repeat feature. That only works with HDMI since it requires
AVI infoframe to signal the information to the sink. Hence even if
the mode dotclock would be valid we cannot currently assume that
we can just ignore the DBLCLK flag. Reject it for DVI sinks.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108181242.13650-6-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
The SDVO/HDMI port register limited color range bit can only be used
with TMDS encoding and not SDVO encoding, ie. to be used only when
using the port as a HDMI port as opposed to a SDVO port. The SDVO
spec does have a note that some GMCHs might allow that, but gen4
bspec vehemently disagrees. I suppose on ILK+ it might work since
the color range handling is on the CPU side rather than on the PCH
side, so there is no clear linkage between the TMDS vs. SDVO
encoding and color range. Alas, I have no hardware to test that
theory.
To implement limited color range support for SDVO->HDMI we need to
ask the SDVO device to do the range compression. Do so, but first
check if the device even supports the colorimetry selection.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108181242.13650-5-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
The following backtrace is seen when running aspeed G5 kernels.
WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/drm_fb_helper.c:2233 drm_fbdev_generic_setup+0x138/0x198
aspeed_gfx 1e6e6000.display: Device has not been registered.
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3 #1
Hardware name: Generic DT based system
Backtrace:
[<8010d6d0>] (dump_backtrace) from [<8010d9b8>] (show_stack+0x20/0x24)
r7:00000009 r6:60000153 r5:00000000 r4:8119fa94
[<8010d998>] (show_stack) from [<80b8cb98>] (dump_stack+0xcc/0xec)
[<80b8cacc>] (dump_stack) from [<80123ef0>] (__warn+0xd8/0xfc)
r7:00000009 r6:80e62ed0 r5:00000000 r4:974c3ccc
[<80123e18>] (__warn) from [<80123f98>] (warn_slowpath_fmt+0x84/0xc4)
r9:00000009 r8:806a0140 r7:000008b9 r6:80e62ed0 r5:80e631f8 r4:974c2000
[<80123f18>] (warn_slowpath_fmt) from [<806a0140>] (drm_fbdev_generic_setup+0x138/0x198)
r9:00000001 r8:9758fc10 r7:9758fc00 r6:00000000 r5:00000020 r4:9768a000
[<806a0008>] (drm_fbdev_generic_setup) from [<806d4558>] (aspeed_gfx_probe+0x204/0x32c)
r7:9758fc00 r6:00000000 r5:00000000 r4:9768a000
[<806d4354>] (aspeed_gfx_probe) from [<806dfca0>] (platform_drv_probe+0x58/0xa8)
Since commit 1aed9509b2 ("drm/fb-helper: Remove return value from
drm_fbdev_generic_setup()"), drm_fbdev_generic_setup() must be called
after drm_dev_register() to avoid the warning. Do that.
Fixes: 1aed9509b2 ("drm/fb-helper: Remove return value from drm_fbdev_generic_setup()")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701001002.74997-1-linux@roeck-us.net
Some objects we map once during their construction, and then never
access their mappings again, even if they are kept around for the
duration of the driver. Keeping those pages mapped, often vmapped, is
therefore wasteful and we should release the maps as soon as we no
longer need them.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708173748.32734-3-chris@chris-wilson.co.uk
As we have a pin_map interface, that knows how to flush the data to the
device, use it. The only downside is that we keep the kmap around, as
once acquired we keep the mapping cached until the object's backing
store is released.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708173748.32734-2-chris@chris-wilson.co.uk
We removed retiring requests from the shrinker in order to decouple the
mutexes from reclaim in preparation for unravelling the struct_mutex.
The impact of not retiring is that we are much less agressive in making
global objects available for shrinking, as such objects remain pinned
until they are flushed by a heartbeat pulse following the last retired
request along their timeline. In order to ensure that pulse occurs in
time for memory reclamation, we should kick it from kswapd.
The catch is that we have added some flush_work() into the retirement
phase (to ensure that we reach a global idle in a timely manner), but
these flush_work() are not eligible (i.e do not belong to WQ_MEM_RELCAIM)
for use from inside kswapd. To avoid flushing those workqueues, we teach
the retirer not to do so unless we are actually waiting, and only do the
plain retire from inside the shrinker.
Note that for execlists, we already retire completed contexts as they
are scheduled out, so it should not be keeping global state
unnecessarily pinned. The legacy ringbuffer however...
References: 9e9539800d ("drm/i915: Remove waiting & retiring from shrinker paths")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708173748.32734-1-chris@chris-wilson.co.uk
drm_gem_dumb_map_offset() now exists and does everything
vgem_gem_dump_map does and *ought* to do.
In particular, vgem_gem_dumb_map() was trying to reject mmapping an
imported dmabuf by checking the existence of obj->filp. Unfortunately,
we always allocated an obj->filp, even if unused for an imported dmabuf.
Instead, the drm_gem_dumb_map_offset(), since commit 90378e5891
("drm/gem: drm_gem_dumb_map_offset(): reject dma-buf"), uses the
obj->import_attach to reject such invalid mmaps.
This prevents vgem from allowing userspace mmapping the dumb handle and
attempting to incorrectly fault in remote pages belonging to another
device, where there may not even be a struct page.
v2: Use the default drm_gem_dumb_map_offset() callback
Fixes: af33a9190d ("drm/vgem: Enable dmabuf import interfaces")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.13+
Link: https://patchwork.freedesktop.org/patch/msgid/20200708154911.21236-1-chris@chris-wilson.co.uk
In line with what happened for other gt-related features, move the sseu
debugfs files under gt/.
The sseu_status debugfs has also been kept at the top level as we do
have tests that use it; it will be removed once we teach the tests to
look into the new path.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-10-daniele.ceraolospurio@intel.com
Ahead of moving the sseu debugfs logic under gt/, update the functions
to use intel_gt where possible to make the move cleaner.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-9-daniele.ceraolospurio@intel.com
SSEUs are a GT capability, so track them under gt_info.
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-8-daniele.ceraolospurio@intel.com
Keep all the SSEU code in the relevant file. The code has also been
updated to use intel_gt instead of dev_priv.
Based on an original patch by Sandeep.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-7-daniele.ceraolospurio@intel.com
We already call 2 gt-related init_mmio functions in driver_mmio_probe
and a 3rd one will be added by a follow-up patch, so pre-emptively
introduce a gt_init_mmio function to group them.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-6-daniele.ceraolospurio@intel.com
Since the engines belong to the GT, move the runtime-updated list of
available engines to the intel_gt struct. The original mask has been
renamed to indicate it contains the maximum engine list that can be
found on a matching device.
In preparation for other info being moved to the gt in follow up patches
(sseu), introduce an intel_gt_info structure to group all gt-related
runtime info.
v2: s/max_engine_mask/platform_engine_mask (tvrtko), fix selftest
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-5-daniele.ceraolospurio@intel.com
All the info we read in intel_device_info_init_mmio are engine-related
and since we already have an engine_init_mmio function we can just
perform the operations from there.
v2: clarify comment about forcewake requirements and pruning (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-4-daniele.ceraolospurio@intel.com
A follow up patch will move the engine mask under the gt structure,
so get ready for that.
v2: switch the remaining gvt case using dev_priv->gt to gvt->gt (Chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-3-daniele.ceraolospurio@intel.com
Use intel_<uncore/de>_read instead of I915_READ to read the
informational registers.
Extended from an original sseu-only patch by Sandeep.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708003952.21831-2-daniele.ceraolospurio@intel.com
Based on the platform, Bspec expects us to wait or poll with
timeout for DDI BUF IDLE bit to be set to 0 (non idle) or get active
after enabling DDI_BUF_CTL.
v2:
* Based on platform, fixed delay or poll (Ville)
* Use a helper to do this (Imre, Ville)
v3:
* Add a new function _active for DDI BUF CTL to be non idle (Ville)
v4:
* Use the timeout for GLK (Ville)
v5:
* Add bspec quote, change timeout to 500us (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701221052.8946-2-manasi.d.navare@intel.com
Modify the helper to add a fixed delay or poll with timeout
based on platform specification to check for either Idle bit
set (DDI_BUF_CTL is idle for disable case)
v2:
* Use 2 separate functions or idle and active (Ville)
v3:
* Change the timeout to 16usecs (Ville)
v4:
* Change the timeout 8, follow spec (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701221052.8946-1-manasi.d.navare@intel.com
clang static analysis flags this error
drivers/gpu/drm/radeon/ci_dpm.c:5652:9: warning: Use of memory after it is freed [unix.Malloc]
kfree(rdev->pm.dpm.ps[i].ps_priv);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/radeon/ci_dpm.c:5654:2: warning: Attempt to free released memory [unix.Malloc]
kfree(rdev->pm.dpm.ps);
^~~~~~~~~~~~~~~~~~~~~~
problem is reported in ci_dpm_fini, with these code blocks.
for (i = 0; i < rdev->pm.dpm.num_ps; i++) {
kfree(rdev->pm.dpm.ps[i].ps_priv);
}
kfree(rdev->pm.dpm.ps);
The first free happens in ci_parse_power_table where it cleans up locally
on a failure. ci_dpm_fini also does a cleanup.
ret = ci_parse_power_table(rdev);
if (ret) {
ci_dpm_fini(rdev);
return ret;
}
So remove the cleanup in ci_parse_power_table and
move the num_ps calculation to inside the loop so ci_dpm_fini
will know how many array elements to free.
Fixes: cc8dbbb4f6 ("drm/radeon: add dpm support for CI dGPUs (v2)")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When I update the latest kernel, I see the following "____ptrval____" boot
messages.
[ 1.872600] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000048000c00 and cpu addr 0x(____ptrval____)
[ 1.879095] radeon 0000:01:05.0: fence driver on ring 5 use gpu addr 0x0000000040056038 and cpu addr 0x(____ptrval____)
Both radeon_fence_driver_start_ring() and amdgpu_fence_driver_start_ring()
have the similar issue, there exists the following two methods to solve it:
(1) Use "%pK" instead of "%p" so that the CPU address can be printed when
the kptr_restrict sysctl is set to 1.
(2) Just completely drop the CPU address suggested by Christian, because
the CPU address was useful in the past, but isn't any more. We now have a
debugfs file to read the current fence values.
Since the CPU address is not much useful, just remove the debug info about
CPU address.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To support inbox1 in CW4 we need to actually program CW4 instead of
region 4 for newer firmware.
This is done correctly on DCN20/DCN21 but this code wasn't added to
DCN30.
[How]
Copy over the missing code. It doesn't need address translation since
DCN30 uses virtual addressing.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in mmhub v9.4.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in mmhub v2.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in mmhub v1.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in gfxhub v2.1.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in gfxhub v2.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in gfxhub v1.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in VCN2/JEPG2. They are for the same ASIC.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in UVD7/VCE4. They are for the same ASIC.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of
hardcode in VCN1/JEPG1. They are for the same ASIC.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in GMC10.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates to use register distance member instead of hardcode
in GMC9.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to abstract register distances between two continuous
context domains and invalidation engines. In different ip headers, these
distances may be differences.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: AnZhong Huang <anzhong.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_pasid.c isn't using the kfd2kgd interface any more. Remove redundant
code trying to look up a device for finding that interface.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the mutext lock/unlock outside of the if(),
as the mutex is always taken: either in the if()
branch or in the else branch.
Signed-off-by: Alex Jivin <alex.jivin@amd.com>
Suggested-By: Luben Tukov <luben.tuikov@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This field is missing for dcn3 so add it from dcn20.
enc2_set_dynamic_metadata() trys to sets this and we get a
generic_reg warning since the mask is not defined.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We want to be able to see SMU messages sent and their responses
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently we don't explicitly send a request for a minimum PHYCLK, and
we hope that the dependencies other clocks have will raise PHYCLK when
needed.
[How]
- new clk_mgr function to keep track of PHYCLK requirements
- request maximum requirement across all links
- remove PHYCLK from clock state comparator, as it doesn't come from DML
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
VSC infoframe is needed for PSR. Previously only DMCU controller
supported PSR. Now DMUB also implements PSR.
[How]
Remove VSC infoframe dependency on DMCU.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current DAL behaviour is to not send VSIF if mode does not support VRR
(ie. FS range is < 10Hz). However, we should still set FS Native Color
Active bit in some unsupported mode cases.
[How]
Remove check for if VRR is supported before building infopacket.
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver re-initialize registers already set in FW
[How]
Transfer init to FW
Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print scaling parameters as they are calculated in diags.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MMHUB powergating should be disabled on navi12 and enabled on sienna
cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use RREG32_KIQ to read gfx register when try to get gfx/sdma
clockgating state instead of RREG32, as it will result
to system hard hang when GPU is enter into GFXOFF state.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add support for loading ucode with ta_firmware_header_v2_0
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
TMR is required to be destoried with GFX_CMD_ID_DESTROY_TMR while the
system goes to suspend. Otherwise, PSP may return the failure state
(0xFFFF007) on Gfx-2-PSP command GFX_CMD_ID_SETUP_TMR after do multiple
times suspend/resume.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unload ASD function in suspend phase.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Firmware "Selected" state is a transient state - we don't expect to see
it after finishing driver probe, we even have asserts sprinkled over
i915 to confirm whether that's the case.
Unfortunately - we don't handle the transition out of "Selected" in case
of GuC fetch error, leading those asserts to fire when calling
"intel_huc_is_used()".
v2: Add dbg print when moving HuC into error state (Daniele)
Reported-by: Marcin Bernatowicz <marcin.bernatowicz@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Marcin Bernatowicz <marcin.bernatowicz@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708100843.297655-2-michal@hardline.pl
It has been pointed out that information about HuC usage doesn't belong
in guc_info debugfs. Let's move "supported/used/wanted" matrix to a
separate debugfs file, keeping guc_info strictly about GuC.
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lukasz Fiedorowicz <lukasz.fiedorowicz@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200708100843.297655-1-michal@hardline.pl
drm_hdcp_check_ksvs_revoked() returns the number of revoked keys and
error codes when the SRM parsing is failed.
Errors in SRM parsing can't affect the HDCP auth, hence with this patch,
I915 will look out for revoked key count alone.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429134555.22106-1-ramalingam.c@intel.com
Add missing pm_runtime_get_sync() into ltdc_crtc_atomic_enable() to
match pm_runtime_put_sync() in ltdc_crtc_atomic_disable(), otherwise
the LTDC might suspend via runtime PM, disable clock, and then fail
to resume later on.
The test which triggers it is roughly -- run qt5 application which
uses eglfs platform and etnaviv, stop the application, sleep for 15
minutes, run the application again. This leads to a timeout waiting
for vsync, because the LTDC has suspended, but did not resume.
Fixes: 35ab6cfbf2 ("drm/stm: support runtime power management")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Yannick Fertré <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200229221649.90813-1-marex@denx.de
Content Protection property should be updated as per the kernel
internal state. Let's say if Content protection is disabled
by userspace, CP property should be set to UNDESIRED so that
reauthentication will not happen until userspace request it again,
but when kernel disables the HDCP due to any DDI disabling sequences
like modeset/DPMS operation, kernel should set the property to
DESIRED, so that when opportunity arises, kernel will start the
HDCP authentication on its own.
Somewhere in the line, state machine to set content protection to
DESIRED from kernel was broken and IGT coverage was missing for it.
This patch fixes it.
v2:
- Fixing hdcp CP state in connector atomic check function
intel_hdcp_atomic_check(). [Maarten]
This will require to check hdcp->value in intel_hdcp_update_pipe()
in order to avoid enabling hdcp, if it was already enabled.
v3:
- Rebased.
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/350962/?series=72664&rev=2 #v1
Link: https://patchwork.freedesktop.org/patch/359396/?series=72251&rev=3 #v2
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630082048.22308-1-anshuman.gupta@intel.com
The HiSilicon hibmc driver triggers a splat at boot time as below
[ 14.137806] ------------[ cut here ]------------
[ 14.142405] hibmc-drm 0000:0a:00.0: Device has not been registered.
[ 14.148661] WARNING: CPU: 0 PID: 496 at drivers/gpu/drm/drm_fb_helper.c:2233 drm_fbdev_generic_setup+0x15c/0x1b8
[ 14.158787] [...]
[ 14.278307] Call trace:
[ 14.280742] drm_fbdev_generic_setup+0x15c/0x1b8
[ 14.285337] hibmc_pci_probe+0x354/0x418
[ 14.289242] local_pci_probe+0x44/0x98
[ 14.292974] work_for_cpu_fn+0x20/0x30
[ 14.296708] process_one_work+0x1c4/0x4e0
[ 14.300698] worker_thread+0x2c8/0x528
[ 14.304431] kthread+0x138/0x140
[ 14.307646] ret_from_fork+0x10/0x18
[ 14.311205] ---[ end trace a2000ec2d838af4d ]---
This turned out to be due to the fbdev device hasn't been registered when
drm_fbdev_generic_setup() is invoked. Let's fix the splat by moving it down
after drm_dev_register() which will follow the "Display driver example"
documented by commit de99f0600a ("drm/drv: DOC: Add driver example
code").
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706144713.1123-1-yuzenghui@huawei.com
If system memory is migrated to device private memory and no GPU MMU
page table entry exists, the GPU will fault and call hmm_range_fault()
to get the PFN for the page. Since the .dev_private_owner pointer in
struct hmm_range is not set, hmm_range_fault returns an error which
results in the GPU program stopping with a fatal fault.
Fix this by setting .dev_private_owner appropriately.
Fixes: 08ddddda66 ("mm/hmm: check the device private page owner in hmm_range_fault()")
Cc: stable@vger.kernel.org
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The patch to add zero page migration to GPU memory inadvertently included
part of a future change which broke normal page migration to GPU memory
by copying too much data and corrupting GPU memory.
Fix this by only copying one page instead of a byte count.
Fixes: 9d4296a7d4 ("drm/nouveau/nouveau/hmm: fix migrate zero page to GPU")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tegra TRM says worst-case reply time is 1216us, and this should fix some
spurious timeouts that have been popping up.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Prevents "snd_hda_codec_hdmi hdaudioC1D0: HDMI: pin nid 5 not registered"
that occur on some configurations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
On eviction, we acquire the vm->mutex and then wait on the vma->active.
Therefore when binding and pinning the vma, we must follow the same
sequence, lock/pin the vma then mark it active. Otherwise, we mark the
vma as active, then wait for the vm->mutex, and meanwhile the evictor
holding the mutex waits upon us to complete our activity.
Fixes: 8ccfc20a7d ("drm/i915/gt: Mark ring->vma as active while pinned")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706170138.8993-1-chris@chris-wilson.co.uk
(cherry picked from commit 8567774e87)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is new step that was recently added to the combo phy
initialization.
v2:
- using intel_de_rmw()
v3:
- going back to read() modify and write() as group register can't be
read
BSpec: 49291
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200625195252.39312-1-jose.souza@intel.com
The recent GCC compiler is very picky with the VD_H_START() and
AFBC_DEC_PIXEL_BGN_H() macros, triggering a runtime assert error as:
In function 'meson_overlay_setup_scaler_params',
inlined from 'meson_overlay_atomic_update' at
drivers/gpu/drm/meson/meson_overlay.c:542:2:
./include/linux/compiler.h:392:38: error: call to
'__compiletime_assert_341' declared with attribute error: FIELD_PREP:
value too large for the field
drivers/gpu/drm/meson/meson_overlay.c:413:4: note: in expansion of macro
'AFBC_DEC_PIXEL_BGN_H'
413 | AFBC_DEC_PIXEL_BGN_H(hd_start_lines - afbc_left) |
| ^~~~~~~~~~~~~~~~~~~~
./include/linux/compiler.h:392:38: error: call to
'__compiletime_assert_401' declared with attribute error: FIELD_PREP:
value too large for the field
It's not expected to overflow these fields, but the compiler did
find a case where it overflows.
We can safely ignore this, so mask the value with the field width.
Fixes: e860785d57 ("drm/meson: overlay: setup overlay for Amlogic FBC")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[narmstrong: moved to (value) to avoid precedence issues]
Link: https://patchwork.freedesktop.org/patch/msgid/20200707135009.32474-1-narmstrong@baylibre.com
Looking through the attributes for DMA mappings, it appears that by
default dma_map_sg will try and create a kernel accessible map of the
page. We never access this, as we either have a struct page already or
an iomap, so we can request that the dma mapper does not create one.
Without a kernel map in place, one presumes the rest of the memory
control attributes do not apply. We also explicitly control the caches
around the mappings, so we can ask it not to bother synchronising itself.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706224308.22636-1-chris@chris-wilson.co.uk
On eviction, we acquire the vm->mutex and then wait on the vma->active.
Therefore when binding and pinning the vma, we must follow the same
sequence, lock/pin the vma then mark it active. Otherwise, we mark the
vma as active, then wait for the vm->mutex, and meanwhile the evictor
holding the mutex waits upon us to complete our activity.
Fixes: 8ccfc20a7d ("drm/i915/gt: Mark ring->vma as active while pinned")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706170138.8993-1-chris@chris-wilson.co.uk
There's modesetting init code in ast_main.c. Move it to ast_mode.c and
merge it with the modesetting init code in ast_mode_init(). The result
is ast_mode_config_init(), which initalizes the whole modesetting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-15-tzimmermann@suse.de
Struct ast_crtc has been cleaned up and it's now a wrapper around the
DRM CRTC structure struct drm_crtc. This patch converts the driver to
struct drm_crtc and removes struct ast_crtc.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-13-tzimmermann@suse.de
The cursor helpers reserve buffer objects in VRAM and update their
content. So although tied to modesetting, cursor helpers are more
of a memory manager. The modesetting's cursor plane requires this
functionality, so initialize cursors before modesetting.
While at it, also add an error check for ast_cursor_init().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-12-tzimmermann@suse.de
Register a release function to finalize cursors. The _fini() function
gets un-exported from the source file.
The function ast_mode_fini() is now empty and will be removed by a
later patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-11-tzimmermann@suse.de
Updating the image in a cursor's HW BO requires a mapping of the BO's
buffer in the kernel's address space. Cursor image updates can happen
frequently and create CPU overhead.
As cursor HW BOs are small and never move, they are now map exactly
once during the initialization and the mapping is used throughout the
driver's lifetime.
This change also removes a possible source of failures from
ast_cursor_show(). As the helper does not establish mappings, it cannot
fail. As a result, the cursor plane's atomic-update helper does not
call any failable interfaces. All failures are detected before trying
to update the cursor plane.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-10-tzimmermann@suse.de
Having a cursor move function is misleading, as it actually enables the
cursor's image for displaying. So rename it to ast_cursor_show(). It's
semantics is to show a cursor at the specified location on the screen.
The displayed cursor is always the image in the cursor front BO.
This change also simplifies struct ast_crtc to being a mere wrapper around
around struct drm_crtc. It will be removed by a later patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-7-tzimmermann@suse.de
The new helper ast_cursor_blit() updates a cursor's backbuffer HW
BO from a framebuffer structure. The cursor plane's prepare_fb()
function now uses the new interface.
Pinning and mapping of BOs is done automatically by the helper. This
includes the source BO, which was not pinned by the original code in
prepare_fb().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702115029.5281-4-tzimmermann@suse.de
The TXP so far has been leveraging the PixelValve infrastructure in the
driver, that was really two things: the interaction with DRM's CRTC
concept, the setup of the underlying pixelvalve and the setup of the shared
HVS, the pixelvalve part being irrelevant to the TXP since it accesses the
HVS directly.
Now that we have a clear separation between the three parts, we can
represent the TXP as a CRTC of its own, leveraging the common CRTC and HVS
code, but leaving aside the pixelvalve setup.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20f387f881b57f3474fa42d94cfd8bc1b7b80595.1591882579.git-series.maxime@cerno.tech
The vc4_crtc_data structure is currently storing data related to both the
general CRTC information needed by the rest of the vc4 driver (like HVS
output and available FIFOs) and some related to the pixelvalve attached to
that CRTC. Let's split this into two structures so that we can reuse the
CRTC part into the TXP later on.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/8eb317c91ac208d7f926d76ad421002fa0364c47.1591882579.git-series.maxime@cerno.tech
The CRTC in vc4 is backed by two devices, the HVS that does the composition
and the PixelValve that does the timing generation.
The writeback is kind of a special case since it doesn't have an associated
pixelvalve but goes straight from the HVS to the TXP. Therefore, it makes
sense to move out the HVS setup code into helpers so that we can also reuse
them from the TXP driver.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/96443394e81429ee38f070cfe231701b07e56d69.1591882579.git-series.maxime@cerno.tech
The VC4_SET_FIELD and VC4_GET_FIELD are reimplementing most of the logic
already defined in FIELD_SET and FIELD_GET. Let's convert the vc4 macros to
use the FIELD_* macros.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703135713.985810-1-maxime@cerno.tech
Not only do we need to release the vm.ref we acquired for the vma on the
duplicate insert branch, but also for the normal error paths, so roll
them all into one.
Reported-by: Andi Shyti <andi.shyti@intel.com>
Suggested-by: Andi Shyti <andi.shyti@intel.com>
Fixes: 2850748ef8 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702211015.29604-1-chris@chris-wilson.co.uk
(cherry picked from commit 03fca66b7a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As we allow for parallel threads to create the same vma instance
concurrently, and we only filter out the duplicates upon reacquiring the
spinlock for the rbtree, we have to free the loser of the constructors'
race. When freeing, we should also drop any resource references acquired
for the redundant vma.
Fixes: 2850748ef8 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702083225.20044-1-chris@chris-wilson.co.uk
(cherry picked from commit 2377427cdd)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The current fence_y_offset calculation is broken. I think it more or
less used to do the right thing, but then I changed the plane code
to put the final x/y source offsets back into the src rectangle so
now it's just subtraacting the same value from itself. The code would
never have worked if we allowed the framebuffer to have a non-zero
offset.
Let's do this in a better way by just calculating the fence_y_offset
from the final plane surface offset. Note that we don't align the
plane surface address to fence rows so with horizontal panning there's
often a horizontal offset from the fence start to the surface address
as well. We have no way to tell the hardware about that so we just
ignore it. Based on some quick tests the invlidation still happens
correctly. I presume due to the invalidation nuking at least the full
line (or a segment of multiple lines).
Fixes: 54d4d719fa ("drm/i915: Overcome display engine stride limits via GTT remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-4-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 5331889b5f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fix typo: "TRIGER" --> "TRIGGER"
The two misplelled macros:
1) OAREPORTTRIG1_EDGE_LEVEL_TRIGER_SELECT_MASK
2) OAREPORTTRIG5_EDGE_LEVEL_TRIGER_SELECT_MASK
are not used in any other sources of the kernel,
so this change can be consider only a local change
for the i915_reg.h file.
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703125046.8395-1-f.suligoi@asem.it
It is not really unexpected to hit wedge on init this way.
We're already downgrading error printk when running with fault injection,
let's use the same approach for CI tainting.
v2: Don't check fault inject in trace dump (Chris)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706144107.204821-3-michal@hardline.pl
We can add taint from multiple places, printing the caller allows us to
have a better overview of what exactly caused us to do the tainting.
v2: Tweak format and print the device (Chris)
v3: Move things around (Chris)
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706144107.204821-2-michal@hardline.pl
Getting wedged device on driver init is pretty much unrecoverable.
Since we're running various scenarios that may potentially hit this in
CI (module reload / selftests / hotunplug), and if it happens, it means
that we can't trust any subsequent CI results, we should just apply the
taint to let the CI know that it should reboot (CI checks taint between
test runs).
v2: Comment that WEDGED_ON_INIT is non-recoverable, distinguish
WEDGED_ON_INIT from WEDGED_ON_FINI (Chris)
v3: Appease checkpatch, fixup search-replace logic expression mindbomb
in assert (Chris)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706144107.204821-1-michal@hardline.pl
The initial CI results did not include a TGL system which includes a
panel that is having issues with patch. Revert while we triage.
This reverts commit 680c45c767.
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702230957.30536-1-matthew.s.atwood@intel.com
code refactoring for hibmc_drv_vdac.c, no actual function changes.
v2:
remove the debug message.
v3:
embedding connector and encoder in struct hibmc_drm_private.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1593680081-60313-1-git-send-email-tiantao6@hisilicon.com
Use the drm_bridge_connector helper to create a connector for pipelines
that use drm_bridge. This allows splitting connector operations across
multiple bridges when necessary, instead of having the last bridge in
the chain creating the connector and handling all connector operations
internally.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Replace the manual panel handling code by a drm_panel_bridge. This
simplifies the driver and allows all components in the display pipeline
to be treated as bridges, paving the way to generic connector handling.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The mtk_dsi driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Convert mtk_dsi to a bridge driver with built-in encoder support for
compatibility with existing component drivers.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
This is really a cosmetic change just to make a bit more readable the
code after convert the driver to drm_bridge. The bridge variable name
will be used by the encoder drm_bridge, and the chained bridge will be
named next_bridge.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Equivalent information can be nowadays obtained using function tracer
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
There are some `static const u8` variables that are not used, this
triggers a warning building with `make W=1`, it is safe to remove them,
so do it and make the compiler more happy.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The driver will be loaded by via a platform device. So we
will need to get the device_node from the parent device.
Depending on this we will set the driver data.
As all this is done later already, just delete the call to
of_device_get_match_data.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
In function mtk_dsi_clk_hs_state, remove unnecessary conversion
to bool return, this change is to make the code a bit readable.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reuse the ppgtt_bind_vma() for aliasing_ppgtt_bind_vma() so we can
reduce some code near-duplication. The catch is that we need to then
pass along the i915_address_space and not rely on vma->vm, as they
differ with the aliasing-ppgtt.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703102519.26539-1-chris@chris-wilson.co.uk
Normally i85x/i865 3D activity will block FBC until a 2D blit
occurs. I suppose this was meant to avoid recompression while
3D activity is still going on but the frame hasn't yet been
presented. Unfortunately that also means that a page flipped
3D workload will permanently block FBC even if it only renders
a single frame and then does nothing.
Since we are using software render tracking anyway we might as
well flip the chicken bit so that 3D does not block FBC. This
will avoid the permament FBC blockage in the aforemention use
case, but thanks to the software tracking the compressor will
not disturb 3D rendering activity.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702153723.24327-5-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Unlike all the other pre-snb desktop platforms i865 actually
supports FBC. Let's enable it.
Quote from the spec:
"DevSDG provides the same Run-Length Encoded Frame Buffer
Compression (RLEFBC) function as exists in DevMGM."
As i865 only has the one pipe we want to skip massaging the
plane<->pipe assignment aimed at getting FBC+LVDS working on
the mobile platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702153723.24327-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The MSG_FBC_REND_STATE register only exists on snb+. For older
platforms (would also work for snb+) we can simply rewite DSPSURF
to trigger a flip nuke.
While generally RMW is considered harmful we'll use it here for
simplicity. And since FBC doesn't exist in i830 we don't have to
worry about the DSPSURF double buffering hardware fails present
on that platform.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702153723.24327-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Consult the actual plane stride instead of the fb stride. The two
will disagree when we remap the gtt. The plane stride is what the
hw will be fed so that's what we should look at for the FBC
retrictions/cfb allocation.
Since we no longer require a fence we are going to attempt using
FBC with remapping, and so we should look at correct stride.
With 90/270 degree rotation the plane stride is stored in units
of pixels, so we need to conver it to bytes for the purposes
of calculating the cfb stride. Not entirely sure if this matches
the hw behaviour though. Need to reverse engineer that at some
point...
We also need to reorder the pixel format check vs. stride check
to avoid triggering a spurious WARN(stride & 63) with cpp==1 and
plane stride==32.
v2: Try to deal with rotated stride and related WARN
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 691f7ba58d ("drm/i915/display/fbc: Make fences a nice-to-have for GEN9+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702153723.24327-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
We still need "Bump up CDCLK" workaround otherwise getting
underruns - however currently it blocks 8K as CDCLK = Pixel rate,
in 8K case would require CDCLK to be around 1 Ghz which is not
possible.
v2: - Convert to expression(max(min_cdclk, min(pixel_rate, max_cdclk))
(Ville Syrjälä)
- Use type specific min_t, max_t(Ville Syrjälä)
Fixes: 46d53e271c ("Revert "drm/i915: Remove unneeded hack now for CDCLK"")
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702091526.10096-1-stanislav.lisovskiy@intel.com
The information about platform/driver/user view of GuC firmware usage
currently requires user to either go through kernel log or parse the
combination of "enable_guc" modparam and various debugfs entries.
Let's keep things simple and add a "supported/used/wanted" matrix
(already used internally by i915) in guc_info debugfs.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lukasz Fiedorowicz <lukasz.fiedorowicz@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lukasz Fiedorowicz <lukasz.fiedorowicz@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701142752.419878-1-michal@hardline.pl
Since gen8 we don't use swizzle anymore. Don't dump registers related to
it: registers may or may not be there.
v2: pull the rest of driver state reporting before the read out (Chris)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702200714.1278-1-lucas.demarchi@intel.com
Rather than reuse the common ctx->mutex for locking the execbuffer LUT,
split it into its own lock to avoid being taken [as part of ctx->mutex]
at inappropriate times. In particular to avoid the inversion from taking
the timeline->mutex for the whole execbuf submission in the next patch.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703004306.11117-1-chris@chris-wilson.co.uk
Since the VD1 Amlogic FBC decoder is now configured by the overlay driver,
commit the right registers to decode the Amlogic FBC frame.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-7-narmstrong@baylibre.com
Setup the Amlogic FBC decoder for the VD1 video overlay plane to use
read the FBC header as Scatter Memory layout reference.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-6-narmstrong@baylibre.com
Setup the Amlogic FBC decoder for the VD1 video overlay plane to use
a different superblock size for the Memory Saving mode.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-5-narmstrong@baylibre.com
Setup the Amlogic FBC decoder for the VD1 video overlay plane.
The VD1 Amlogic FBC decoder is integrated in the pipeline like the
YUV pixel reading/formatter but used a direct memory address instead.
This adds support for the basic layout, and needs to calculate the content
body size since the header is allocated after.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200703080728.25207-4-narmstrong@baylibre.com
Not only do we need to release the vm.ref we acquired for the vma on the
duplicate insert branch, but also for the normal error paths, so roll
them all into one.
Reported-by: Andi Shyti <andi.shyti@intel.com>
Suggested-by: Andi Shyti <andi.shyti@intel.com>
Fixes: 2850748ef8 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702211015.29604-1-chris@chris-wilson.co.uk
Since we no longer always take struct_mutex around everything, and want
the freedom to create GEM objects, actually taking struct_mutex inside
the lock creation ends up pulling the mutex inside other looks. Since we
don't use generally use struct_mutex, we can relax the tainting.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702083225.20044-3-chris@chris-wilson.co.uk
Avoid waking up the device and taking stale locks if we know that the
object is not currently mmapped. This is particularly useful as not many
object are actually mmapped and so we can destroy them without waking
the device up, and gives us a little more freedom of workqueue ordering
during shutdown.
v2: Pull the release_mmap() into its single user in freeing the objects,
where there can not be any race with a concurrent user of the freed
object. Or so one hopes!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>,
Link: https://patchwork.freedesktop.org/patch/msgid/20200702163623.6402-2-chris@chris-wilson.co.uk
Only a GGTT mmapping will use the aperture detiling registers, so on a
tiling change for an object, we only need to revoke those mmappings and
not the CPU mmappings (which are always linear irrespective of the tiling).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702163623.6402-1-chris@chris-wilson.co.uk
We have a mix of dport, intel_dport, intel_dig_port and dig_port to
reference a intel_digital_port struct. Numbers are around
5 intel_dport
36 dport
479 intel_dig_port
352 dig_port
Since we already removed the intel_ prefix from most of our other
structs, do the same here and prefer dig_port.
v2: rename everything in i915, not just a few display sources and
reword commit message (from Matt Roper)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701045054.23357-1-lucas.demarchi@intel.com
Now also comes with the added benefit of doing a drm_crtc_vblank_off(),
which means vblank state isn't ill-defined and fail-y at driver load
before the first modeset on each crtc.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-5-daniel.vetter@ffwll.ch
Now also comes with the added benefit of doing a drm_crtc_vblank_off(),
which means vblank state isn't ill-defined and fail-y at driver load
before the first modeset on each crtc.
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-3-daniel.vetter@ffwll.ch
Now also comes with the added benefit of doing a drm_crtc_vblank_off(),
which means vblank state isn't ill-defined and fail-y at driver load
before the first modeset on each crtc.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Stylon Wang <stylon.wang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-2-daniel.vetter@ffwll.ch
Only when vblanks are supported ofc.
Some drivers do this already, but most unfortunately missed it. This
opens up bugs after driver load, before the crtc is enabled for the
first time. syzbot spotted this when loading vkms as a secondary
output. Given how many drivers are buggy it's best to solve this once
and for all in shared helper code.
Aside from moving the few existing calls to drm_crtc_vblank_reset into
helpers (i915 doesn't use helpers, so keeps its own) I think the
regression risk is minimal: atomic helpers already rely on drivers
calling drm_crtc_vblank_on/off correctly in their hooks when they
support vblanks. And driver that's failing to handle vblanks after
this is missing those calls already, and vblanks could only work by
accident when enabling a CRTC for the first time right after boot.
Big thanks to Tetsuo for helping track down what's going wrong here.
There's only a few drivers which already had the necessary call and
needed some updating:
- komeda, atmel and tidss also needed to be changed to call
__drm_atomic_helper_crtc_reset() intead of open coding it
- tegra and msm even had it in the same place already, just code
motion, and malidp already uses __drm_atomic_helper_crtc_reset().
- Laurent noticed that rcar-du and omap open-code their crtc reset and
hence would actually be broken by this patch now. So fix them up by
reusing the helpers, which brings the drm_crtc_vblank_reset() back.
Only call left is in i915, which doesn't use drm_mode_config_reset,
but has its own fastboot infrastructure. So that's the only case where
we actually want this in the driver still.
I've also reviewed all other drivers which set up vblank support with
drm_vblank_init. After the previous patch fixing mxsfb all atomic
drivers do call drm_crtc_vblank_on/off as they should, the remaining
drivers are either legacy kms or legacy dri1 drivers, so not affected
by this change to atomic helpers.
v2: Use the drm_dev_has_vblank() helper.
v3: Laurent pointed out that omap and rcar-du used drm_crtc_vblank_off
instead of drm_crtc_vblank_reset. Adjust them too.
v4: Laurent noticed that rcar-du and omap open-code their crtc reset
and hence would actually be broken by this patch now. So fix them up
by reusing the helpers, which brings the drm_crtc_vblank_reset() back.
v5: also mention rcar-du and ompadrm in the proper commit message
above (Laurent).
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://syzkaller.appspot.com/bug?id=0ba17d70d062b2595e1f061231474800f076c7cb
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot+0871b14ca2e2fb64f6e3@syzkaller.appspotmail.com
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: zhengbin <zhengbin13@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tegra@vger.kernel.org
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612160056.2082681-1-daniel.vetter@ffwll.ch
The variable result is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Large clock values may overflow and show up as negative.
Reported by prOMiNd on IRC.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for integrated_system_info table v12. Use the actual
v12 structure.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Renoir uses integrated_system_info table v12. The table
has the same layout as v11 with respect to this data. Just
reuse the existing code for v12 for stable.
Fixes incorrectly reported vram info in the driver output.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the compile error below:
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c: In function 'smu_v11_0_init_microcode':
>> arch/arc/include/asm/bug.h:22:2: error: implicit declaration of function 'pr_warn'; did you mean 'pci_warn'? [-Werror=implicit-function-declaration]
22 | pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
| ^~~~~~~
drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:176:3: note: in expansion of macro 'BUG'
176 | BUG();
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Changes that are fast don't require updating DLG parameters making
this call unnecessary. Considering this is an expensive call it should
not be done on every flip.
DML touches clocks, p-state support, DLG params and a few other DC
internal flags and these aren't expected during fast. A hang has been
reported with this change when called on every flip which suggests that
modifying these fields is not recommended behavior on fast updates.
[How]
Guard the validation to only happen if update type isn't FAST.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1191
Fixes: a24eaa5c51 ("drm/amd/display: Revalidate bandwidth before commiting DC updates")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's otherwise properly supported, just needs exposing to userspace.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for GWS in Arcturus, which needs MEC2 firmware #48
or above. Fix the MEC2 version check for Vega 10 GWS support,
since Vega 10 firmware adds 0x8000 to the actual firmware
revision. We were previously declaring support where it did not
exist.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 2eee0229f6.
Fallback to a stable base until we have a correct new one
Signed-off-by:Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
issue:
originally we kickoff IB test asynchronously with driver's
init, thus
the IB test may still running when the driver loading
done (modprobe amdgpu done).
if we shutdown VM immediately after amdgpu driver
loaded then GPU may
hang because the IB test is still running
fix:
flush the delayed_init routine at the bottom of device_init
to avoid driver loading done prior to the IB test completes
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update PROCESS_QUANTUM, the time the hardware scheduler allows
processes to run before switching to other processes when it becomes
over-subscribed. Increase this to 10ms, to allow processes to better
amortize their task switch times.
Update HQD Quantum, the amount of time that an active queue stays
attached to the CP before we forcibly switch it for another active
queue for fairness.
Setting these so that HQD < PROCESS makes it easier to ensure that
we get fairness when we have multiple active queues on the device.
Otherwise we may start process-swapping before we get to all the
queues in a CP.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In case of certain display configurations we want to allow max detile
buffer utilization by using 4 to 1 mpc combine
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Register key for AE or QA do regression test. New edid status for
check.
[How]
Add register key edid_read_retry_times.
Add new edid status EDID_FALL_BACK.
Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Add command for notification of active streams to DMUB
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In cases where refresh range is slightly below 10, FreeSync is not
active or supported. Need to round values before checking refresh range
in order to have FreeSync supported in these cases.
[How]
Remove redundant values and round values before checking valid refresh range.
Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For special DP convert VGA dongle, core_link_read_dpcd for
DP_DOWNSTREAM_PORT_0 always return fail, then dongle_type will be set to
DISPLAY_DONGLE_NONE, which will cause desktop resolution abnormal.
[How]
If dpcd for DP_DOWNSTREAM_PORT_0 read fail, skip set dongle_type =
DISPLAY_DONGLE_NONE.
Signed-off-by: jinlong zhang <jinlong.zhang@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SMU may return error code to driver, but driver only check if response
is OK.
[How]
Check SMU response instead of reg_wait, assert in case of reponse isn't
OK.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to keep the same buffer allocated for use during multiple
hardware initializations.
[How]
- allocate gpu memory buffer on clock manager construct
- free gpu memory buffer on clock manager destruct
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Debug flags are not set by default.
[How]
Set debug flags to 0
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The legacy way to initialize discovery_tmr_size
is using DISCOVERY_TMR_SIZE, while after we reduce
DISCOVERY_TMR_SIZE from 64KB to 4KB, variable
discovery_tmr_size is also reduced to 4KB, this is not
correct, it still should be 64KB, discovery_tmr_size
will be used to calculate ip_discovery reserved mem's
start address and size.
Using DISCOVERY_TMR_OFFSET to init discovery_tmr_size instead.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To follow conventional style. And this unnecessary "@" confuses
our userspace tool.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update sienna_cichlid driver if header file to match pptable changes.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copy board parameters directly instead of set each parameter for
sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only read first 4K data instead of whole TMR block,
so we can reduce the time in full access mode.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After we move request full access before set
ip blocks, we can merge atombios init block
of SRIOV and baremetal together.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From SIENNA_CICHLID, HW introduce a new protection
feature which can control the FB, doorbell and MMIO
write access for VF, so guest driver should request
full access before ip discovery, or we couldn't access
ip discovery data in FB.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Init soc15 reg base early enough so we can touch
mailbox related registers in request full access
for sriov before set_ip_blocks, vi&nv arch doesn't
use reg base in virt ops.
v2: fix reg_base_init missed in bare metal case.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move request init data to virt detection func, so we
can insert request full access between request init data
and set ip blocks.
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When there is no graphics support, KFD can use more of the VMIDs. Graphics
VMIDs are only used for video decoding/encoding and post processing. With
two VCE engines, there is no reason to reserve more than 2 VMIDs for that.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The KFD VMID assignment was hard-coded in a few places. Consolidate that in
a single variable adev->vm_manager.first_kfd_vmid. The value is still
assigned in gmc-ip-version-specific code.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Port functionality from the Radeon driver to support
UVD and VCE power management.
Signed-off-by: Alex Jivin <alex.jivin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Port functionality from the Radeon driver to support
VCE clock control.
Signed-off-by: Alex Jivin <alex.jivin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Port functionality from the Radeon driver to support
UVD clock control.
Signed-off-by: Alex Jivin <alex.jivin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As we allow for parallel threads to create the same vma instance
concurrently, and we only filter out the duplicates upon reacquiring the
spinlock for the rbtree, we have to free the loser of the constructors'
race. When freeing, we should also drop any resource references acquired
for the redundant vma.
Fixes: 2850748ef8 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702083225.20044-1-chris@chris-wilson.co.uk
If the driver gets stuck holding the kernel timeline, we cannot issue a
heartbeat and so fail to discover that the driver is indeed stuck and do
not issue a GPU reset (which would hopefully unstick the driver!).
Switch to using a trylock so that we can query if the heartbeat's
timeline mutex is locked elsewhere, and then use the timer to probe if it
remains stuck at the same spot for consecutive heartbeats, indicating
that the mutex has not been released and the engine has not progressed.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200702095219.963-1-chris@chris-wilson.co.uk
The burst length is configured in VIU_OSD1_FIFO_CTRL_STAT[31] and
VIU_OSD1_FIFO_CTRL_STAT[11:10]. The public S905D3 datasheet describes
this as:
- 0x0 = up to 24 per burst
- 0x1 = up to 32 per burst
- 0x2 = up to 48 per burst
- 0x3 = up to 64 per burst
- 0x4 = up to 96 per burst
- 0x5 = up to 128 per burst
The lower two bits map to VIU_OSD1_FIFO_CTRL_STAT[11:10] while the upper
bit maps to VIU_OSD1_FIFO_CTRL_STAT[31].
Replace meson_viu_osd_burst_length_reg() with pre-defined macros which
set these values. meson_viu_osd_burst_length_reg() always returned 0
(for the two used values: 32 and 64 at least) and thus incorrectly set
the burst size to 24.
Fixes: 147ae1cbaa ("drm: meson: viu: use proper macros instead of magic constants")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200620155752.21065-1-martin.blumenstingl@googlemail.com
The old epoch counter was left uninited, so the function returned a
changed state always.
While at it debug print the old epoch counter as well.
Fixes: 35205ee9ba ("drm/i915: Send hotplug event if edid had changed")
Cc: Kunal Joshi <kunal1.joshi@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701180001.15857-1-imre.deak@intel.com
using the new API drmm_kzalloc() instead of devm_kzalloc()
v3:
still fixed include statements sorted alphabetically.
v2:
keep the DRM include statements sorted alphabetically.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1593676183-28525-1-git-send-email-tiantao6@hisilicon.com
amd-drm-next-5.9-2020-07-01:
amdgpu:
- DC DMUB updates
- HDCP fixes
- Thermal interrupt fixes
- Add initial support for Sienna Cichlid GPU
- Add support for unique id on Arcturus
- Major swSMU code cleanup
- Skip BAR resizing if the bios already did id
- Fixes for DCN bandwidth calculations
- Runtime PM reference count fixes
- Add initial UVD support for SI
- Add support for ASSR on eDP links
- Lots of misc fixes and cleanups
- Enable runtime PM on vega10 boards that support BACO
- RAS fixes
- SR-IOV fixes
- Use IP discovery table on renoir
- DC stream synchronization fixes
amdkfd:
- Track SDMA usage per process
- Fix GCC10 compiler warnings
- Locking fix
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
UAPI:
- Update comments to clarify MTYPE
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701155041.1102829-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
intel_dp_set_source_rates() calls intel_dp_is_edp(), which is unsafe to
use before encoder_type is set. This caused GEN11+ to incorrectly strip
HBR3 from source rates for edp. Move intel_dp_set_source_rates() to
after encoder_type is set. Add comment to intel_dp_is_edp() describing
unsafe usages.
v2: Alter intel_dp_set_source_rates final position (Ville/Manasi).
Remove outdated comment (Ville).
Slight optimization of control flow in intel_dp_init_connector.
Slight rewording in commit message.
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630233310.10191-1-matthew.s.atwood@intel.com
Large clock values may overflow and show up as negative.
Reported by prOMiNd on IRC.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Renoir uses integrated_system_info table v12. The table
has the same layout as v11 with respect to this data. Just
reuse the existing code for v12 for stable.
Fixes incorrectly reported vram info in the driver output.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The reset pin is inverted, so if we don't assert reset, the actual gpio
will be high and may keep driving the IO port of the panel.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-12-megous@megous.com
The datasheet suggests to issue sleep in after display off
as a part of the panel's shutdown sequence.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-11-megous@megous.com
Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel used in
PinePhone. Add support for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-10-megous@megous.com
Calling sleep out and display on is a controller specific part
of the initialization process. Move it out of the panel specific
initialization function to the enable callback.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-9-megous@megous.com
It's better than having it spread around the driver.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-8-megous@megous.com
Parametrize the driver so that it can support more panels based
on st7703 controller.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-7-megous@megous.com
This is done so that code that's not specific to a particular
jh057n panel is named after the controller. Functions specific
to the panel are kept named after the panel.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-6-megous@megous.com
This rename is done so that the driver matches the name of the
display controller and in preparation for adding support for more
panels to the driver.
This is just a basic file rename, with no code changes.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-5-megous@megous.com
'level' here means the highest level we can't use, so when checking
the fbc watermarks we need a -1 to get at the last enabled level.
While at if refactor the code a bit to declutter
g4x_compute_pipe_wm().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-12-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
To simplify things, call the combo PHY/TBT PLL calculation functions
directly from the corresponding combo/TypeC PLL get functions, instead of
calling the same calculation functions after having to recheck if the
given PHY is combo or TypeC.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629185848.20550-2-imre.deak@intel.com
When the reference clock is 38.4MHz, using the current TBT PLL
fractional divider value results in a slightly off TBT link frequency.
This causes an endless loop of link training success followed by a bad
link signaling and retraining at least on a Dell WD19TB TBT dock. The
workaround provided by the HW team is to divide the fractional divider
value by two. This fixed the link training problem on the ThinkPad dock.
The same workaround is needed on some EHL platforms and for combo PHY
PLLs, these will be addressed in a follow-up.
Bspec: 49204
References: HSDES#22010772725
References: HSDES#14011861142
Reported-and-tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629185848.20550-1-imre.deak@intel.com
The obj->lut_list is traversed when the object is closed as the file
table is destroyed during process termination. As this occurs before we
kill any outstanding context if, due to some bug or another, the closure
is blocked, then we fail to shootdown any inflight operations
potentially leaving the GPU spinning forever. As we only need to guard
the list against concurrent closures and insertions, the hold is short
and merits being treated as a simple spinlock.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701084439.17025-1-chris@chris-wilson.co.uk
Replace all uses of the legacy drm_bus_flags with their relevant
_SAMPLE_ variant.
This is a 1:1 replacement, no effort was made to validate the actual
bus flags for the panels.
Note:
DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE
DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630180545.1132217-6-sam@ravnborg.org
Drop use of the legacy drm_bus_flags member and use the more descriptive
_SAMPLE_ variant.
No functional change.
Note:
DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630180545.1132217-5-sam@ravnborg.org
Replace the legacy member with the more descriptive _DRIVE_ variant.
No functional change.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630180545.1132217-3-sam@ravnborg.org
When graph isn't defined in a device-tree, the of_graph_get_remote_node()
prints a noisy error message, telling that port node is not found. This is
undesirable behaviour in our case because absence of a panel/bridge graph
is a valid case. Let's check the graph's presence in a device-tree before
proceeding with parsing of the graph.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701074232.13632-3-digetx@gmail.com
I updated my system with Radeon VII from kernel 5.6 to kernel 5.7, and
following started to happen on each boot:
...
BUG: kernel NULL pointer dereference, address: 0000000000000128
...
CPU: 9 PID: 1940 Comm: modprobe Tainted: G E 5.7.2-200.im0.fc32.x86_64 #1
Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 1407 04/02/2020
RIP: 0010:lock_bus+0x42/0x60 [amdgpu]
...
Call Trace:
i2c_smbus_xfer+0x3d/0xf0
i2c_default_probe+0xf3/0x130
i2c_detect.isra.0+0xfe/0x2b0
? kfree+0xa3/0x200
? kobject_uevent_env+0x11f/0x6a0
? i2c_detect.isra.0+0x2b0/0x2b0
__process_new_driver+0x1b/0x20
bus_for_each_dev+0x64/0x90
? 0xffffffffc0f34000
i2c_register_driver+0x73/0xc0
do_one_initcall+0x46/0x200
? _cond_resched+0x16/0x40
? kmem_cache_alloc_trace+0x167/0x220
? do_init_module+0x23/0x260
do_init_module+0x5c/0x260
__do_sys_init_module+0x14f/0x170
do_syscall_64+0x5b/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
...
Error appears when some i2c device driver tries to probe for devices
using adapter registered by `smu_v11_0_i2c_eeprom_control_init()`.
Code supporting this adapter requires `adev->psp.ras.ras` to be not
NULL, which is true only when `amdgpu_ras_init()` detects HW support by
calling `amdgpu_ras_check_supported()`.
Before 9015d60c9e, adapter was registered by
-> amdgpu_device_ip_init()
-> amdgpu_ras_recovery_init()
-> amdgpu_ras_eeprom_init()
-> smu_v11_0_i2c_eeprom_control_init()
after verifying that `adev->psp.ras.ras` is not NULL in
`amdgpu_ras_recovery_init()`. Currently it is registered
unconditionally by
-> amdgpu_device_ip_init()
-> pp_sw_init()
-> hwmgr_sw_init()
-> vega20_smu_init()
-> smu_v11_0_i2c_eeprom_control_init()
Fix simply adds HW support check (ras == NULL => no support) before
calling `smu_v11_0_i2c_eeprom_control_{init,fini}()`.
Please note that there is a chance that similar fix is also required for
CHIP_ARCTURUS. I do not know whether any actual Arcturus hardware without
RAS exist, and whether calling `smu_i2c_eeprom_init()` makes any sense
when there is no HW support.
Cc: stable@vger.kernel.org
Fixes: 9015d60c9e ("drm/amdgpu: Move EEPROM I2C adapter to amdgpu_device")
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Tested-by: Bjorn Nostvold <bjorn.nostvold@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The failures with ROCm only happen with noretry=1, so
enable runtime pm when noretry=0 (the current default).
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a switch statement to simplify asic checks. Note
that BACO is not supported on APUs, so there is no
need to check them.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The release_firmware() function is NULL tolerant so we do not need
to check for NULL param before calling it.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is an off-by-one bounds check on the index into arrays
table->mc_reg_address and table->mc_reg_table_entry[k].mc_data[j] that
can lead to reads and writes outside of arrays. Fix the bound checking
off-by-one error.
Addresses-Coverity: ("Out-of-bounds read/write")
Fixes: cc8dbbb4f6 ("drm/radeon: add dpm support for CI dGPUs (v2)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the cases where adev->jpeg.num_jpeg_inst is zero or the condition
adev->jpeg.harvest_config & (1 << i) is always non-zero the variable
ret is never set to an error condition and the function returns
an uninitialized value in ret. Since the only exit condition at
the end if the function is a success then explicitly return
0 rather than a potentially uninitialized value in ret.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 14f43e8f88 ("drm/amdgpu: move JPEG2.5 out from VCN2.5")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This includes older APUs like renoir.
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure we pass through ret label to unlock the mutex.
Signed-off-by: John van der Kamp <sjonny@suffe.me.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function kobject_init_and_add alloc memory like:
kobject_init_and_add->kobject_add_varg->kobject_set_name_vargs
->kvasprintf_const->kstrdup_const->kstrdup->kmalloc_track_caller
->kmalloc_slab, in err branch this memory not free. If use
kmemleak, this path maybe catched.
These changes are to add kobject_put in kobject_init_and_add
failed branch, fix potential memleak.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clk_s is checked twice in a row in ni_init_smc_spll_table().
fb_div should be checked instead.
Fixes: 69e0b57a91 ("drm/radeon/kms: add dpm support for cayman (v5)")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes incorrect output when reading pp_dpm_dcefclk sysfs.
Output before this patch:
cat /sys/devices/pci0000:<snip>/pp_dpm_dcefclk
0: 506Mhz
1: 42949671Mhz *
2: 1266Mhz
v2: squash in arcturus fix
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If (smu)->ppt_funcs->intf is not initialized then
smu_send_smc_msg(smu, SMU_MSG_ReadSerialNumBottom32, &bottom32) and
smu_send_smc_msg(smu, SMU_MSG_ReadSerialNumTop32, &top32) will not
touch bottom32 and top32.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Regression was introduced where setting max bpc property has no effect
on the atomic check and final commit. It has the same effect as max bpc
being stuck at 8.
[How]
Correctly propagate max bpc with the new connector state.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Add debug flag for psr to use hw locking mgr state machine
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
DP link layer CTS specs updated to change the test parameters in test
4.2.1.1.
Before it requires source to delay 400us on aux no reply.
With the specs updates Errata5, it requires source to delay 3.2ms
(based on LTTPR aux timeout)
This causes our test to fail after updating with the latest test
equipment firmware.
[how]
the change is to allow LTTPR 3.2ms aux timeout delay by default.
And set back to 400us if LTTPR feature is not enabled.
We will set 3.2ms and always enable LTTPR non transparent mode
if LTTPR feature is enabled and LTTPR is present.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Two issues:
1. Add read only operation support for query ddc data over aux.
2. Fix a bug where if read size is multiple of 16,
mot of the last read transaction will not be set to 0.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If the front porch of the two timings differ, then there may not be
enough time while both streams are in vertical blank to perform a memory
clock change. This can hang the system.
[How]
Check the each streams timing.v_front_porch when determining if the two
streams are synchronizable.
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
why:
seamless boots requires split of init_hw into hw and pipes to work. This
was implemented in dcn10_init_hw but did not apply yet to dcn30.
how:
Copy over dcn10_init_hw and adapt it to dcn30 using recent changes to
dcn3. Behavior will be different in init sequence.
Signed-off-by: Martin Leung <martin.leung@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We try to to change new_clocks->dppclk_khz to 100000 when
new_clocks->dppclk_khz is 0
[How]
Don't change new_clocks->dppclk_khz value when new_clocks->dppclk_khz is
0
Signed-off-by: Peikang Zhang <peikang.zhang@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
10K YCbCr420 does not need ODM 4:1, but it requires MPC 4 split
indicated on the flags.
[How]
Make pixel encoding and resolution size specific workaround to enable
ODM combine on YCbCr420 high resolution modes.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
If a typeC to HDMI dongle supports YCbCr420 pass through and VSC
colorimetry and pixel encoding formats in the Extended Receiver
Capability, we shall allow VSC SDP to be used.
[How]
The Extended Receiver Capability field shall check the
EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT bit in the
TRAINING_AUX_RD_INTERVAL register. Removed DPCD rev checking for VSC
SDP.
Signed-off-by: Derek Lai <Derek.Lai@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DMCUB firmware version is now available from firmware metadata block.
We should be passing this into dmub_srv so we can know when to apply
firmware version specific functionality like using CW4 only instead
of the REGION4.
[How]
We don't have the helpers for DM to actually extract out firmware
metadata block themselves.
We could add that and add helpers in DM to grab this, but not every
creation sequence has firmware instruction before dmub_srv_create.
Easiest way to handle this is to fill this in automatically per DM in
the place we do have it - when calculating the region parameters. But
only fill it in if DM already hasn't in case we need to override with
a specific version.
We aren't do anything firmware version specific in dmub_srv_create
today that does require fw_version, so while it's a little unituitive
to do it when calculating region parameters it works for now.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Connector property output_bpc is available on DP/eDP only. New IGT tests
would benifit if this property works on HDMI.
[How]
Enable this read-only property on all types of connectors.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
All YCbCr420 resolutions 5K and above have tiling and discoloration
issues. The issue can be remedied by forcing ODM combine from 5K to 8K.
10K resolution requires ODM 4:1. The mechanism of what the real problem
is, that is inherent in ODM combine programming, doesn't seem to be
pointed at singular register programming (CLK, MPC, DCSURF, etc.), and
needs more in-depth programming sequence review for these new use case
scenarios. Until then, workaround to enable ODM combine is proposed.
While it is not our policy, HW spreadsheet also recommends turning on
ODM for these scenario to lower the voltage.
[How]
Make pixel encoding and resolution size specific workaround to enable
ODM combine on YCbCr420 high resolution modes.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is using pixelclk AVFS for dppclk, that would cause issue.
[How]
To use dispclk AVFS for both dispclk and dppclk. There would choose
dppclk for request voltage when dispclk wouldn't be updated case. If
dispclk need to be updated, then it'll choose the bigger one from dppclk
and dispclk for request voltage.
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If optimized init is done in FW. DCN init be skipped in driver. This
need to be communicated between driver and fw and maintain backwards
compatibility.
[How]
Use DMUB scratch 0 bit 2 to indicate optimized init done in fw and
use DMUB scatch 4 bit 0 to indicate drive supports the optimized flow
so FW will perform it.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Check max_tmds_clk_mhz firstly will restrict pixel clock under HDMI
1.4, thus HDMI2.0 port can't correctly support 4K 60Hz.
[HOW]
Fine tune the logic to check max_forum_tmds_clk_mhz firstly.
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Need to check if local_sink is NULL before accessing.
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC global validation can fail when userspace requests to draw large
plane without performing the clipping themselves.
This is observed in the IGT kms_plane panning tests for 4K displays
where they draw an 8K plane without any clipping while expecting only
the top 4K to be drawn.
[How]
DRM already has helpers to take care of the clipping necessary and to
mark whether a plane is visible or not, so make use of these helpers
in DM before passing the plane to DC.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Update scratch information for boot status
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dc_link_set_psr_allow_active() always returns true, even in the case
that PSR is not supported.
[How]
Hook up the return value of dc_link_set_psr_allow_active().
Signed-off-by: Camille Cho <Camille.Cho@amd.com>
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Side-by-side and Top-and-bottom stereo configurations fail DML mode
validation due to Viewport exceeded.
This is because we consider the planes as being pipe split in pipe
population so we end up doubling the viewport width, eg. from 4k to 8k.
[How]
These pipes technically aren't hsplit, so add a check for determining
whether is_hsplit should be set.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
assr is content protection for eDP, in order to use it we need to call
psp ta (dtm)
[How]
We have a enable_assr callback, hook into this and call the correct psp
cmd id to enable assr.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently DC doesn't check requested pixel clock against an EDID
specified TMDS max clock if it exists, passing modes that should fail
[HOW]
Add max TMDS clk to edid caps and perform check during validation
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
dc->hwss->edp_backlight_control is null, it would casue it only be off
main-link of eDP. It is not worng behavior for eDP power sequence off.
[how]
Must use hwseq->funcs.edp_backlight_control finction pointer for edp
backlight.
Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The calculation of virtual channel payload would not take link settings
in account. As we calculate VCPI slots needed both PBN for stream and
also PBN per time slot. Before we would use generic PBN per time slot,
which would not change with link settings causing wrong Payload
allocation.
[how]
Provide PBN per time slot for each Virtual channel payload calculation.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Hw lock manager adds the ability to lock pipe, cursor, and dig in fw.
[How]
Send hw lock command to fw to lock pipe, cursor, and dig.
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement SI UVD. The SI UVD firmware requires validation.
v2: squash in missing brace fix (Colin Ian King)
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For implement UVD on SI asic, add Oland, Pitcairn, Verde, Tahiti firmwares.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drop the duplicate register macros from sid.h and use the
standard ones in the oss register headers.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when compiled with allmodconfig option, there are error
messages as below:
ERROR: modpost:
"mod_color_is_table_init"
[drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost:
"mod_color_get_table"
[drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
ERROR: modpost:
"mod_color_set_table_init_state"
[drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
To fix the issue, this commits removes
CONFIG_DRM_AMD_DC_DCN guard in color/makefile.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
CC: Lewis Huang <Lewis.Huang@amd.com>
CC: Aric Cyr <Aric.Cyr@amd.com>
CC: Alexander Deucher <Alexander.Deucher@amd.com>
CC: Harry Wentland <hwentlan@amd.com>
CC: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
CC: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SOC15_WAIT_ON_RREG's return value needn't always been handled by
caller. new design is to fix this kind of unused variable.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Navi12 platform, node power_dpm_force_performance_level
doesn't work correctly in one-VF mode with at least three
smu messages not supported:
SMU_MSG_SetSoftMaxByFreq
SMU_MSG_SetSoftMinByFreq
SMU_MSG_TransferTableDram2Smu
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support for setting up XGMI FB address regions
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the module parameter sched_hw_submission is probably from user mode,
and the kernel need to check whether it is legal.
1. align hw sched jobs to power of 2 and set minimum number is 2.
2. use kernel api is_power_of_2() to simplify driver code.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We need to update each p-state in the bounding box
[How]
Update states when assigning values to clocks
v2: squash in patch to set min values (Alex)
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variable ret is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unused amdgpu_xgmi_hive_try_lock() and smu7_reset_asic_tasks().
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's only applicable on newer asics. We could end up here when
using DC on older asics like SI or KV.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1170
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If there are no supported callbacks. We'll fall back to the
nominal clocks.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1170
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Include header file vcn_v2_0.h
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Include header file vcn_v1_0.h
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used sparse(make C=1) to find these loose ends.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used sparse(make C=1) to find these loose ends.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used sparse(make C=1) to find these loose ends.
v2:
removed unwanted extra line
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used sparse(make C=1) to find these loose ends.
v2:
removed unwanted extra line
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Include header file jpeg_v2_0.h.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Include header file jpeg_v1_0.h.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix memory leak in amdgpu_debugfs_gpr_read not freeing data when
amdgpu_virt_enable_access_debugfs failed.
Fixes: 95a2f91738 ("drm/amdgpu: restrict debugfs register access under SR-IOV")
Signed-off-by: Chen Tao <chentao107@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix memory leak in amdgpu_debugfs_gpr_read not freeing data when
pm_runtime_get_sync failed.
Fixes: a9ffe2a983 ("drm/amdgpu/debugfs: properly handle runtime pm")
Signed-off-by: Chen Tao <chentao107@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: c422a628925d ("drm/amdgpu: rename macro for VCN2.0 2.5 and 3.0")
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes below warning:
drivers/gpu/drm/amd/amdgpu/df_v3_6.c: In function ‘df_v3_6_reset_perfmon_cntr’:
drivers/gpu/drm/amd/amdgpu/df_v3_6.c:571:2: warning: ‘hi_base_addr’ may be used
uninitialized in this function [-Wmaybe-uninitialized]
571 | df_v3_6_perfmon_wreg(adev, lo_base_addr, 0, hi_base_addr, 0);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1: add the new macro "smu_ppt_xxx()" to unify smu callback interfaces
v2: rename the macro smu_ppt_xxx to smu_ppt_funcs.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the pptable_func callback sets should be has unify interface,
so use "smu" as the pptable_func interface first parameter.
fix interfaces:
1. i2c_eeprom_init
2. i2c_eeprom_fini
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to update the bounding box to have more granular control of the
DCFCLK.
[How]
Setup DCFCLK to use STA values and also optimal values based on
UCLK.
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
According to Marek a pipeline sync should be inserted for implicit syncs well.
v2: bump the driver version
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Despite having different IP offsets the computed address of the register(s)
are the same between gfx7..gfx10. This patch fixes the offset relative
to the GC block on gfx10.
(v2): SQ_DEBUG_STS_GLOBAL2 is 0x10 higher ...
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in amdgpu_display_crtc_set_config, the call to pm_runtime_get_sync
increments the counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in amdgpu_drm_ioctl the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in amdgpu_driver_open_kms the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The memcpy() function copies n bytes from memory area src to memory area
dest. So specify the firmware size in bytes.
[How]
Correct the calculation.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Lei Guo <raykwok1150@163.com>
Reviewed-by: Junwei Zhang <zjunweihit@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add rename the gpu busy percentage for consistency and
add the mem busy percentage documentation.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Vega10 and previous asics use one interface, vega20 and newer
use another.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use WARN to print messages with backtrace when evictions are triggered.
This can help determine the root cause of evictions and help spot driver
bugs triggering evictions unintentionally, or help with performance tuning
by avoiding conditions that cause evictions in a specific workload.
The messages are controlled by a new module parameter that can be changed
at runtime:
echo Y > /sys/module/amdgpu/parameters/debug_evictions
echo N > /sys/module/amdgpu/parameters/debug_evictions
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Forgot to subtract the SOC15 IP offsetand add the BASE_IDX values.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get the values from VBIOS table
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In function fill_iram_v_2, the ram_table->bright_neg_gain`s
first element [0][0] seems to be missing. This change is just
to make the code a bit readable.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA ULV can benefit low-power modes, but can sometimes cause
latency increases in small SDMA transfers. Server SKUs have a
different trade-off space in this domain, so this configures
the server SKUs' ULV hysteresis times differently than consumer
SKUs'.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The existing code used the major version number of the DRM driver
instead of the device major number of the DRM subsystem for
validating access for a devices cgroup.
This meant that accesses allowed by the devices cgroup weren't
permitted and certain accesses denied by the devices cgroup were
permitted (if they matched the wrong major device number).
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Fixes: 6b855f7b83 ("drm/amdkfd: Check against device cgroup")
Reviewed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Add new initialization bits for driver to check
firmware status
- Add command for HW locking via DMUB
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dmub FW running abnormal after resume from S0i3 due
to data aliagnment issue.
[How]
Before having a solution for this issue, temparory
not doing data pack.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
during S0i3, set power state is toggled a few times,
and dmub uC will restart with current reset/hw_init.
[How]
Remove reset in set power state, and before doing hw_init,
check if dmub is enabled, and doing FW autoload check only
if dmub is already enabled.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some special timing with border, like DMT 640*480 72Hz,
pipe split can't handle well. Thus, it will be black screen
for these special timing.
[How]
Disable pipe split for these timing with borders as W/A.
Signed-off-by: Dale Zhao <dale.zhao@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Multi-adapter calculate regamma table at the same time.
Two thread used the same global variable cause race
condition.
[How]
Change global buffer to local buffer
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC is very fast at link training and stream enablement
which causes issues such as blackscreens for non-compliant
monitors.
[How]
After debugging with scaler vendors we implement the
minimum delays at the necessary locations to ensure
the monitor does not hang. Delays are generic due to
lack of IEEE OUI information on the failing displays.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DMUB command table should be allowed to be used
only if dmcu is explicitly disabled.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To allow code reuse with minimal duplication watermark
calculation needs to be function pointer.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During the debugging process related to a hot-plug
problem with 4k display, we realized that we had
some issues related to the global state validation.
This problem was not explicitly highlighted in the
dmesg log, for this reason, this commit adds a function
that converts `enum dc_status` to a human-readable
string and appends the proper warning message in case
of failure.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Dummy pstate latency actually varies between different
UCLK frequencies, when calculating watermark C, if DAL
always assumes worst case, then it can lead to dummy
pstate not supported scenarios.
[how]
Rather than statically calculating dummy pstate using
worst case, we store the entire table of UCLK to dummy
pstate relationships. On a per mode basis, we calculate
the actual UCLK lower limit, and use the dynamic worst
case dummy pstate latency. This prevents the situation
where we don't support full p-state (which will force
high DPM), but still use low DPM dummy pstate latency.
Signed-off-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The change causes some regression in a common use case.
Will need more investigation before fixing the original issue.
[how]
This reverts commit fb8cf277b1.
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We were updating mpcc if there were tree changes which
is unnecessary since any mpcc being added or removed
will automatically update the tree.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add emul specific hw function to dmub, in case of
emulator is created, we can runtime switch between
dmub emulator or dmub uC via is_virtual flag in dmub.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The SDP deadline indicate the vertical time to send CRC
infopacket in PSR.
Signed-off-by: po-tchen <po-ting.chen@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some sprcified monitor scalar cannot recognize timing
change on demand. Once the link phy disable and enable
during a short period then the Sink protection mechanism
could keep the screen in blank and cannot be recoverred.
[How]
To add 100ms delay between enable link phy and link training.
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
for audio on real TV issue.
[how]
-add wall clock programming for DPREF based when
Pixel clock is done by DP DTO.
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DML failures occur for 420 modes with dynamic pipe
splitting enabled because the ChromaViewport exceeds
the ChromaSurfaceWidth.
This is caused by adding the viewport_width instead
of the viewport_width_c.
This similarly occurs for rotated modes due to the
use of viewport_height instead of viewport_height_c.
[How]
Correct the calculations.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commmit fd0293dd5b.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SOC_BOUNDING_BOX_VALID is unused and not required for dcn21.
[How]
Remove it.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DSC calculations fail because the u16 bits_per_pixel from
the DRM struct is being casted to the u8 drm_bpp parameters
and locals. Integer wraparound is happening because this
value is greater than 255.
[How]
Use u16 to match what's in the structure instead of u8.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Header Changes]
- Version bump to 1.0.13
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Typos cause bandwidth calculation errors, one
of which can cause infinite loop on dcn1 with eDP
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we want to use float point operation on Linux
we need to use within special kernel protection
(`kernel_fpu_{begin,end}()`.), otherwise the kernel
can clobber userspace FPU register state. For detecting
these issues we use a tool named objtool (with -Ffa
flags) to highlight the FPU problems, all warnings can
be summed up as follows:
./tools/objtool/objtool check -Ffa
drivers/gpu/drm/amd/display/dc/dml/dml_common_defs.o
[..] dc/dsc/rc_calc.o: warning: objtool: get_qp_set()+0x2f8:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: dsc_roundf()+0x5:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: dsc_ceil()+0x5:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: get_ofs_set()+0x3eb:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc.o: warning: objtool: calc_rc_params()+0x3c:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/dc_dsc.o: warning: objtool:
get_dsc_bandwidth_range.isra.0()+0x8d:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/dc_dsc.o: warning: objtool: setup_dsc_config()+0x2ef:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc_dpi.o: warning: objtool:copy_pps_fields()+0xbb:
FPU instruction outside of kernel_fpu_{begin,end}()
[..] dc/dsc/rc_calc_dpi.o: warning: objtool:
dscc_compute_dsc_parameters()+0x7b:
FPU instruction outside of kernel_fpu_{begin,end}()
This commit fixes the above issues by rework DSC as described:
1. Isolate all FPU operations in a single file;
2. Use FPU flags only in the file that handles FPU operations;
3. Isolate all functions that require float point operation in static
functions;
4. Add a mid-layer function that does not use any float point operation,
and that could be safely invoked in other parts of the code.
5. Keep float point operation under DC_FP_{START/END} macro.
CC: Christian König <christian.koenig@amd.com>
CC: Alexander Deucher <Alexander.Deucher@amd.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Tony Cheng <tony.cheng@amd.com>
CC: Harry Wentland <hwentlan@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
for following new format, no alpha
SURFACE_PIXEL_FORMAT_GRPH_RGB111110_FLOAT/_FIX:
SURFACE_PIXEL_FORMAT_GRPH_BGR101111_FLOAT/_FIX
same as case SURFACE_PIXEL_FORMAT_GRPH_ARGB1555:
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Even though they are technically MMIO registers I put the bits with the sqind block
for organizational purposes.
Requested for UMR debugging.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix race condition issue when multiple jpeg starts are called.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As will clear vf fw during unload driver, to avoid idle fail. Need
to clear KIQ portion also.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Ack-by: Monk.liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guest VM issue the PSP clear_vf_fw command at 2 points:
1.On VF driver loading, after VF message PSP to setup rings,
the next command is “clear_vf_fw”
2.On VF driver unload before VF message to
destroy rings
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Ack-by: Monk.liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: c1cf79ca5c ("drm/amdgpu: use IP discovery table for renoir")
This nullptr issue should be specific on the Renoir series during try access the PWR_MISC_CNTL_STATUS
when PWR IP not been detected by discovery table. Moreover the PWR IP not existing in Renoir series is
expected therefore just avoid access PWR register in Renoir series.
Signed-off-by: Prike.Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initializes Powertune data for a specific Hawaii card by fixing what
looks like a typo in the code. The device ID 66B1 is not a supported
device ID for this driver, and is not mentioned elsewhere. 67B1 is a
valid device ID, and is a Hawaii Pro GPU.
I have tested on my R9 390 which has device ID 67B1, and it works
fine without problems.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The comments say that the serial number is a 16-digit HEX string so the
buffer needs to be at least 17 characters to hold the NUL terminator.
The other issue is that "size" returned from sprintf() is the number of
characters before the NUL terminator so the memcpy() wasn't copying the
terminator. The serial number needs to be NUL terminated so that it
doesn't lead to a read overflow in amdgpu_device_get_serial_number().
Also it's just cleaner and faster to sprintf() directly to adev->serial[]
instead of using a temporary buffer.
Fixes: 81a1624111 ("drm/amdgpu: Add unique_id and serial_number for Arcturus v3")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Move the common code to amdgpu_smu.c instead of having one
copy in both smu_v11_0.c and smu_v12_0.c.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the calling chain from "amdgpu_smu.c -> ${asic}_ppt.c ->
smu_v11/12_0.c -> amdgpu_smu.c (smu_common_read_sensor())" to "
"amdgpu_smu.c -> ${asic}_ppt.c -> smu_v11/12_0.c". This can help
to maintain clear code layers. More similar changes will be coming.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since SMU_MSG_GetDpmClockFreq is known to be supported for Vega20
and before ASICs only. For those ASICs supporting swSMU, it is not
supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since .populate_smc_tables is just a wrapper of .set_default_dpm_table.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It has exactly the same functionality as .set_deep_sleep_dcefclk.
V2: correct the macro name for better trace
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Silence documentation warnings by correcting kernel-doc comments.
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3388: warning: Excess function parameter 'suspend' description in 'amdgpu_device_suspend'
./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:3485: warning: Excess function parameter 'resume' description in 'amdgpu_device_resume'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:418: warning: Excess function parameter 'tbo' description in 'amdgpu_vram_mgr_del'
./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:418: warning: Excess function parameter 'place' description in 'amdgpu_vram_mgr_del'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:279: warning: Excess function parameter 'tbo' description in 'amdgpu_gtt_mgr_del'
./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:279: warning: Excess function parameter 'place' description in 'amdgpu_gtt_mgr_del'
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:332: warning: Function parameter or member 'hdcp_workqueue' not described in 'amdgpu_display_manager'
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:332: warning: Function parameter or member 'cached_dc_state' not described in 'amdgpu_display_manager'
Signed-off-by: Colton Lewis <colton.w.lewis@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Requested for UMR support.
(v2): Also add reg/bits for gfx9 headers
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
if guest driver failed to enter full GPU access, amdgpu_driver_load_kms
will unload kms and free dev->dev_private, drm_dev_register would access
null pointer. Driver will enter an error state and can't be unloaded.
Signed-off-by: Liu ChengZhe <ChengZhe.Liu@amd.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since DAL settings come between .hw_init and .late_init of SMU. And
DAL needs to know the maximum sustainable clocks.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-and-Tested-by: Flora Cui <flora.cui@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before counting the OD percent into max power limit margin.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of hard coding it as SMU_POWER_SOURCE_AC.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop unused APIs, variables and argument.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the cached max/current power limit and move the input check
to the top layer.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the cached max/current power limit for other cases except
.late_init.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also cache the current and max power limits.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Minor code cleanup.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'UVD' is a HW engine name for Vega20 and before ASICs.
For newer ASICs, the similar engine is named as 'VCN'.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These APIs are used in amdgpu_smu.c only. Thus these wrappers
are unnecessary.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was for Vega20. However Vega20 support is
already dropped from current swSMU.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Helpful for error diagnostic.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use dev_err/warn/info/dbg instead. They are more MGPU friendly.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use dev_err/warn/info/dbg instead of pr_err/warn/info/debug.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The failed case is no SDMA1 IP for Renoir discovery table while in accessing SDMA1 reg base,
thus need have nullptr test for soc15_read_register invoked in MMR addres space inquire opt.
Signed-off-by: Prike.Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These lines are a part of the if statement and they are supposed to
be indented one more tab.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use kfree() instead of kvfree() to free rgb_user in
calculate_user_regamma_ramp() because the memory is allocated with
kcalloc().
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use kvfree() instead of kfree() to free coeff in build_regamma()
because the memory is allocated with kvzalloc().
Fixes: e752058b86 ("drm/amd/display: Optimize gamma calculations")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to do it again.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current 100ms interval makes no sense. User gets outdated
data due to this.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Retrieve only those data interested instead of the whole table.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Retrieve only those data interested instead of the whole table.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Retrieve only those interested metrics data instead of the whole
metrics table. By this, the memory copy can be dropped.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There're 2 .dsc_pg_control, drop the first one.
.dsc_pg_control = NULL,
.dsc_pg_control = dcn20_dsc_pg_control,
Signed-off-by: Flora Cui <flora.cui@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
struct gpu_info_voltage_scaling_v1_0 & gpu_info_soc_bounding_box_v1_0 is
defined in amdgpu_socbb.h
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update powerplay table for sienna_cichlid, add set_thermal_range and
get_max_power_limit function for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
move smu_v11_0_get_max_power_limit and smu_v11_0_set_thermal_range
function from smu_v11_0.c to asic specific _ppt.c to avoid powerplay
table conflict with different ASIC with smu11.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As IO operations(access to SMU internals) and possible sleep are
involved in throttling logging. Workqueue can handle them well.
Otherwise we may hit "scheduling while atomic" error.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of disabling and reenabling it later.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To avoid possible memory leak.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than allocating it dynamically at runtime considering it is only
several bytes in size.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thus redundant code can be dropped.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And some minor changes as dropping unused parameter and label
internal used API as static.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those common operations(for all ASICs) are placed first and followed
by ASIC specific ones. While the display related are placed at the last.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Then redundant code can be dropped.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since smu_smc_table_hw_init() is needed for both .hw_init and .resume.
By doing this, we can drop unnecessary operations on resume.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So that we do not need to perform those unnecessary operations again on
resume.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eliminate the buffer allocation and drop the unnecessary
overdrive table uploading.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Combine and simplify the logics for setup pptable.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Combine and simplify the logics for retrieving bootup
clocks.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fit common design. And this can simplify the buffer deallocation.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So that code can be shared between .hw_fini and .suspend.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Minor code cleanups.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The macros check if the asic has the callback.
So no need to explicitly check.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a dml_print message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We may end up with no planes set yet, depending on the ordering, but we
should have the proper blanking state which is either handled by either
DPG or TG depending on the hardware generation. Check both to determine
the proper blanked state.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/781
Fixes: 5fc0cbfad4 ("drm/amd/display: determine if a pipe is synced by plane state")
Cc: nicholas.kazlauskas@amd.com
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Whenever we switch between tiled formats without also switching pixel
formats or doing anything else that recreates the DC plane state we
can run into underflow or hangs since we're not updating the
DML parameters before committing to the hardware.
[How]
If the update type is FULL then call validate_bandwidth again to update
the DML parmeters before committing the state.
This is basically just a workaround and protective measure against
update types being added DC where we could run into this issue in
the future.
We can only fully validate the state in advance before applying it to
the hardware if we recreate all the plane and stream states since
we can't modify what's currently in use.
The next step is to update DM to ensure that we're creating the plane
and stream states for whatever could potentially be a full update in
DC to pre-emptively recreate the state for DC global validation.
The workaround can stay until this has been fixed in DM.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than checking the ring type manually. We already set
this for MES and KIQ (and a few other special cases).
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4541ea81ed.
This changes structs used by the hardware and breaks dpm on some cards.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To match previous behavior and to not hang the kernel if someone
accidentally builds with KGDB enabled.
Fixes: 1aad707819 ("drm/amd/display: Make BREAK_TO_DEBUGGER() a debug print")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Abstract powergate_vcn/jpeg functions, using smu_dpm_set* to implement it.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The bounding box is still needed by Navi12, temporarily read it from gpu_info
firmware. Should be droped when DAL no longer needs it.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to guard some new DCN3.0 stuff.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was done already done for other DCN blocks.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initilize function tables for hw programing
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Video Package generator.
used to prepare avi info, DP info etc
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Audio formating
Audio related code for setup/control
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-Handle DCN3 cases for bios parser and command tables
-Add command function tables for DCN3
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for managing resources for DCN3
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to program GPIO HW block
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add IWQ services for DCN3,
This allows us to create/init and manage irqs for DCN3
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for DML(Display mode library) for bandwidth calculations
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to program the DCN3 HUBP (Display to data fabric interface
pipe)
HW Blocks:
+--------++------+
| HUBBUB || HUBP |
+--------++------+
|
v
+--------+
| DPP |
+--------+
|
v
+--------+
| MPC |
+--------+
|
v
+-------+
| OPP |
+-------+
|
v
+--------+
| OPTC |
+--------+
|
v
+--------+ +--------+
| DIO | | DCCG |
+--------+ +--------+
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to program the DCN3 DPP (Multiple pipe and plane combine)
HW Blocks:
+--------+
| DPP |
+--------+
|
v
+--------+
| MPC |
+--------+
|
v
+-------+
| OPP |
+-------+
|
v
+--------+
| OPTC |
+--------+
|
v
+--------+ +--------+
| DIO | | DCCG |
+--------+ +--------+
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to program the DCN3 MPC (Multiple pipe and plane combine)
HW Blocks:
+--------+
| MPC |
+--------+
|
v
+-------+
| OPP |
+-------+
|
v
+--------+
| OPTC |
+--------+
|
v
+--------+ +--------+
| DIO | | DCCG |
+--------+ +--------+
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to program the DCN3 OPP (Output Plane Processing)
HW Blocks:
+-------+
| OPP |
+-------+
|
v
+--------+
| OPTC |
+--------+
|
v
+--------+ +--------+
| DIO | | DCCG |
+--------+ +--------+
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds support for handling of clocking relevant to the DCN3 block
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for the DIO (Display IO) block of DCN3, which entails our
stream and link encoders.
HW Blocks:
+--------+
| DIO |
+--------+
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
a.Check whether mem train support when try to reserve related memory.
b.Remove ASIC check and atom firmware table version check as the check
of firmware capability is enough to achieve that purpose.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add memory training support for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Query reserved tmr size through atom firmwareinfo for Sienna_Cichlid and onwards
for all the use cases (IP discovery/G6 memory
training/profiling/diagnostic data.etc), otherwise, fallback to legacy
approach to check and reserve tmr block for ip discovery data and G6
memory training data respectively
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Sienna_Cichlid, PMFW will handle the features disablement on BACO in. No
need to have driver stepped in.
V2: limit this for baco really
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop the hardcode of sienna_cichlid which will force to use softpptable,
so that it can use pptable on vbios once the value of pp_table_id get
from vbios is 0.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add function to check whether baco is support for sienna cichlid.
Remove fucntion of get clock by type with latency as it will not be
called.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support for psp firmware header version v1_3 initialization and
information print.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for PSP SPL (Security patch level) table to support
anti-rollback of FW loaded by Trusted OS.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The instant retrieved gfxclk value should be 0 in gfxoff state.
This can be fetched with gfxoff enabled.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Sienna_Cichlid, GFXOFF state puts gfx dpm into standby mode, then the
gfxclk can't be retireved.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to force and unforce MCLK or SOCCLK to dpm limit value.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a regression due to the rebase , add sienna_cichlid sriov detection back
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only enable one gfx pipe for sienna_cichlid currently.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fw ctf can be triggered if the temperature can't be throttled below the limit.
then the gpu will be powered off and the whole system will hang.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the coding error to skip GPU scheduler setup for KIQ and MES ring.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable VDDCI and MVDD if PP_MCLK_DPM_MASK was enable for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add function to append powerplay table from vbios for sienna_cichlid.
v2: squash in warning fix
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SRIOV run time, driver shouldn't directly access invalidation registers through MMIO.
Use kiq to submit wait_reg_mem package for the invalidation
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable uclk deep sleep for sienna_cichlid.
Df cstate kicks in first, then df triggers uclk ds with the sideband.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN3 has 2 unsymmetrical instances, i.e there're less codecs
on instance 1, we use 0 for decode and 1 for encode for now
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable DPG mode for VCN3.0 by updating related flag.
V2: update description.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To workaround an issue in DPG
V2: update description.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename SOC15_DPG_MODE_OFFSET_2_0, RREG32_SOC15_DPG_MODE_2_0 and
WREG32_SOC15_DPG_MODE_2_0 for VCN2.0, VCN2.5 and VCN3.0.
These three macros are used VCN2.0, VCN2.5 and VCN3.0, therefore rename
it to be a general name.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename RREG32_SOC15_DPG_MODE and WREG32_SOC15_DPG_MODE for VCN1.0
These two macros are used specifically for VCN1.0, therefore rename
it from general name to VCN1.0 specific name.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add range for vcn instance 1 for translation for internal register offset, which
is needed for VCN3.0
V2: update description.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vcn_v3_0_stop_dpg_mode to power off in DPG mode for VCN3.0
V2: update description.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vcn_v3_0_start_dpg_mode to setup and start VCN block in DPG mode for VCN3.0
V2: Separate from previous patch-0002, and update description.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vcn_v3_0_mc_resume_dpg_mode to resume memory controller in DPG mode for VCN3.0
V2: Separate from previous patch-0002, and update description.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vcn_v3_0_clock_gating_dpg_mode to enabling clock gating in DPG mode for VCN3.0
V2: Separate from previous patch-0002, and update description.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <james.zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable OUT OF BAND MONITER for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bundle GPO with gfx DPM and enable it since gfxclk dpm
should work first then GPO works.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GPO is graphics power optimizer.
SMU calculates the 16 gfxclk V/F points according to the CU numbers
and memory activity.RLC picks one of them according to the memory
speed requirements for the data transmission.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmhub pg can be obvserved from PCTL_CTRL
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable athub pg and the status can be checked in
ATHUB_MISC_CNTL.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Statically allocated VM inv eng of gfxhub on sienna_cichlid is used up.
Also VM inv eng is no need for mes ring.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass a piece of memory to MES ucode to fill contents.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update for new member query_status_fence_gpu_mc_ptr in MESAPI_SET_HW_RESOURCES.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update mes_api_def.h to match the latest mes fw.
v2: clean up coding style based on kernel standards:
- fix indentation and alignment
- break long lines
- put the opening brace last on the line
- remove unnecessary blank line and space
- replace uint(32|64) with standard uint(32|64)_t
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add function to get pptable power limit for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU firmware already been loaded from host, don't enable it for now.
May need to re-work it if we want to enable the SMU for guest in the future.
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable VCN dpm set for sienna_cichlid.
Enable JPEG dpm set for sienna_cichlid.
v2: squash in BACO fix (Kenneth)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix typo for vcn3/jpeg3 idle check
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the feature of FCLK Deep Sleep for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the feature of Voltage Regulator (VR) Hot for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdkfd add support for sienna_cichlid virtual function
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Preserve scalar GPRs ttmp[4:11] and ttmp13
- Add single step exception during context save workaround
- Remove incorrect PC adjustment during context save
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The contents of macros are parsed by the assembler before conditions
have been tested. This causes assembly errors when using IP-specific
instructions in the IP-unified trap handler.
Add a preprocessing step to filter IP-specific code.
Also guard a Navi1x-specific instruction (no effect on Sienna_Cichlid).
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Replace SQC stores with TCP stores
- Synchronize with MSG_SAVEWAVE via lgkmcnt
- HW_REG_IB_STS is now read-only
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v4: drop get_tile_config, comment out other callbacks
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only disable 3D pipe 1 on navi1x, enable 3D pipe 1 on Sienna_Cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Each of HDP flush engine should be used by one ring, correct allocate of
hdp flush engine to SDMA ring.
Correct me value of each SDMA ring, as it was cleared when init microcode.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
athub ls is bounded with hdp ls,verified.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add HDP mgcg and ls support and verified
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
confirmed that IPH_MEM_POWER_CTRL_EN and RC_MEM_POWER_CTRL_EN
have to be set for SRAM LS/DS/SD
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update gfx golden setting for gfx10.3.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So the LMI register will be programmed properly
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for the second instance with correct index
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The signed header is added
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Open GFX MGCG, CGCG and 3DCG for sienna_cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Sienna_Cichlid, query fw_reserved_fb_size from vbios directly.
For navi1x, fall back to default 64K TMR size.
For pre-navi, no need to reserve tmr region in top LFB.
v2: fix TMR define (Alex)
v3: partially revert size change
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fw_reserved_size_in_kb is introduced for driver to query
the TMR region reserved by PSP BL in Sienna_Cichlid and onwards
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
firmware_info v3_4 strucure will be used by kernel driver
to query various parameters set by VBIOS for Sienna_Cichlid
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As all four sdma firmware are same, PSP only receive one SDMA fw.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
tiling mode table is not used anymore for gfx10
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vram_info v2_5 was introduced to support sienna_cichlid
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pa_sc_tile_steering_override is only programmable for
gfx10.0/10.1/10.2
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By adding JPEG HW block to Sienna_Cichlid
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By setting up the flags to the ASIC
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is for static powergating and clockgating
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With basic IP block functions and ring functions
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By adding VCN HW block to Sienna_Cichlid
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By adding Sienna_Cichlid VCN firmware
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By setting up the flags to the ASIC
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is for static powergating and clockgating
v2: fix registers (Alex)
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With basic IP block functions and ring functions
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct CP_MES_IC_OP_CNTL register address for sienna_cichlid on mes v10.1.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The number of queue per pipe for mec on sienna_cichlid should be 4.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add mes block support to sienna_cichlid.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update mes initialization sequence.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As mes ring directly submits to hardwared,
it's no need to set up GPU scheduler for mes ring.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert to psp defined ucode item, so that psp can recognize them.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copy mes firmware to gpu buffer.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copy mes firmware info into into global fw array, preparing
for fw front door loading.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The routine is implemented to generate mes command to
assign the hardware resources which can be scheduled
to mes.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The routine is implemented to generate mes command
to query the status of hardware scheduler.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The routine is implemented to generate mes command to remove
a specified hardware queue.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The routine is implemented to generate mes command
to install a hardware queue.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The helper function is used to submit mes command and poll waiting
for the command completion.
v2: replaced with amdgpu_fence_wait_polling to wait.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the definitions of mes commands.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the mes ring during mes block initialization.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Install mes queue via kiq. Disable it temporarily
until it's workable.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Directly writing mes queue registers to set up it.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initialize the mqd according to mes ring setup.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate mqd buffer preparing for mes queue setup.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement mes ring functions and set up them.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do the software initialization on the mes ring.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
eop buffer will be used for mes queue setup.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update some mes definitions.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if irq_src is NULL to avoid dereferencing a NULL pointer,
for MES ring is uneccessary to recieve an interrupt notification.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new ring type definition.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES ring will use the assigned doorbell index for
command submission.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sienna_Cichlid have 2 VCN instances, using different register for range
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable PSP block for firmware loading and other security
setup only when amdgpu use PSP load type to load ucode.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add gmc clockgating support for sienna_cichlid.
The athub version used for sienna_cichlid is v2.1.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add athub v2.1 function and support to compile it.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removed loading duplicate instances of SDMA FW for Sienna_Cichlid,
As sienna_cichlid only use a single image for all instances.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- It fixes wrong return value by returing proper error value instead of
fixed one.
- It fixes ref count leak in mic_pre_enable.
One cleanup
- It removes dev_err() call on platform_get_irq() failure because
platform_get_irq() call dev_err() itself on failure.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=PEF5
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Two fixups
- It fixes wrong return value by returing proper error value instead of
fixed one.
- It fixes ref count leak in mic_pre_enable.
One cleanup
- It removes dev_err() call on platform_get_irq() failure because
platform_get_irq() call dev_err() itself on failure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1593395988-4612-1-git-send-email-inki.dae@samsung.com
A few fixes, mostly fallout from the address space refactor and dpu
color processing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGv0SSXArdYs=mOLqJPJdkvk8CpxaJGecqgbOGazQ2n5og@mail.gmail.com
[Why]
Changes that are fast don't require updating DLG parameters making
this call unnecessary. Considering this is an expensive call it should
not be done on every flip.
DML touches clocks, p-state support, DLG params and a few other DC
internal flags and these aren't expected during fast. A hang has been
reported with this change when called on every flip which suggests that
modifying these fields is not recommended behavior on fast updates.
[How]
Guard the validation to only happen if update type isn't FAST.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1191
Fixes: a24eaa5c51 ("drm/amd/display: Revalidate bandwidth before commiting DC updates")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This registers will be used to implement PSR2 manual tracking/selective
fetch.
v2:
- Fixed typo in _PLANE_SEL_FETCH_BASE
- Renamed PSR2_MAN_TRK_CTL bits to better match spec names
- Renamed _PLANE_SEL_FETCH_* to better match spec names
BSpec: 55229
BSpec: 50424
BSpec: 50420
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200626010151.221388-3-jose.souza@intel.com
Future patches will bring PSR2 selective fetch configuration
validation but most of the configuration checks will be used for HW
tracking and selective fetch so the reoder was necessary.
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200626010151.221388-2-jose.souza@intel.com
Rearrange the allocation of the mm_struct registration to avoid
allocating underneath the i915->mm_lock, so that we avoid tainting the
lock (and in turn many other locks that may be held as i915->mm_lock is
taken, and those locks we may want on the free [shrinker] paths). In
doing so, we convert the lookup to be RCU protected by courtesy of
converting the free-worker to be an rcu_work.
v2: Remember to use hash_rcu variants to protect the list iteration from
concurrent add/del.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200619194038.5088-1-chris@chris-wilson.co.uk
Often we seem to detect an underrun right after modeset on gen2.
It seems to be a spurious detection (potentially the pipe is still
in a wonky state when we enable the planes). An extra vblank wait
seems to cure it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-13-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The default fbc1 compression interval we use is 500 frames. That
translates to over 8 seconds typically. That's rather excessive
so let's drop it to 1 second.
The hardware will not attempt recompression unless at least one
line has been modified, so a shorter compression interval should
not cause extra bandwidth use in the purely idle scenario. Of
course in the mostly idle case we are possibly going to recompress
a bit more.
Should really try to find some kind of sweet spot to minimize
the energy usage...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-11-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The hardware host tracking won't nuke the entire cfb (unless the
entire fb is written through the gtt) so don't clear the busy_bits
for gtt tracking.
Not that it really matters anymore since we've lost ORIGIN_GTT usage
everywhere.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-7-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The current fence_y_offset calculation is broken. I think it more or
less used to do the right thing, but then I changed the plane code
to put the final x/y source offsets back into the src rectangle so
now it's just subtraacting the same value from itself. The code would
never have worked if we allowed the framebuffer to have a non-zero
offset.
Let's do this in a better way by just calculating the fence_y_offset
from the final plane surface offset. Note that we don't align the
plane surface address to fence rows so with horizontal panning there's
often a horizontal offset from the fence start to the surface address
as well. We have no way to tell the hardware about that so we just
ignore it. Based on some quick tests the invlidation still happens
correctly. I presume due to the invalidation nuking at least the full
line (or a segment of multiple lines).
Fixes: 54d4d719fa ("drm/i915: Overcome display engine stride limits via GTT remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-4-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Only the MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
MEDIA_BUS_FMT_RGB888_1X7X4_SPWG and MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA bus
formats are valid for LVDS panels. Warn at probe time to catch the
common mistake of using an incorrect format, as well as discrepancies
between the bus format and the reported bpc.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-5-laurent.pinchart+renesas@ideasonboard.com
The DRM bus flags reporting on which clock edge the pixel data and sync
signals are sampled or driven don't make sense for LVDS panels, as the
bus then uses sub-clock timings to send data. Drop those flags and add a
warning in the probe function to make sure the mistake won't be
repeated.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-4-laurent.pinchart+renesas@ideasonboard.com
The Satoz SAT050AT40H12R2 panel is an LVDS panel, the
MEDIA_BUS_FMT_RGB888_1X24 bus format is thus incorrect. Set it to the
correct value MEDIA_BUS_FMT_RGB888_1X7X4_SPWG.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200629233320.8774-3-laurent.pinchart+renesas@ideasonboard.com
Added epoch counter checking to intel_encoder_hotplug
in order to be able process all the connector changes,
besides connection status. Also now any change in connector
would result in epoch counter change, so no multiple checks
are needed.
v2: Renamed change counter to epoch counter. Fixed type name.
v3: Fixed rebase conflict
v4: Remove duplicate drm_edid_equal checks from hdmi and dp,
lets use only once edid property is getting updated and
increment epoch counter from there.
Also lets now call drm_connector_update_edid_property
right after we get edid always to make sure there is a
unified way to handle edid change, without having to
change tons of source code as currently
drm_connector_update_edid_property is called only in
certain cases like reprobing and not right after edid is
actually updated.
v5: Fixed const modifiers, removed blank line
v6: Removed drm specific part from this patch, leaving only
i915 specific changes here.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-4-kunal1.joshi@intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
This counter will be used by drm_helper_probe_detect caller to determine
if anything had changed(including edid, connection status and etc).
Hardware specific driver detect hooks are responsible for updating this
counter when some change is detected to notify the drm part,
which can trigger for example hotplug event.
Also now call drm_connector_update_edid_property
right after we get edid always to make sure there is a
unified way to handle edid change, without having to
change tons of source code as currently
drm_connector_update_edid_property is called only in
certain cases like reprobing and not right after edid is
actually updated.
v2: Added documentation for the new counter. Rename change_counter to
epoch_counter.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105540
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-3-kunal1.joshi@intel.com
Many drivers would benefit from using
drm helper to compare edid, rather
than bothering with own implementation.
v2: Added documentation for this function.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-2-kunal1.joshi@intel.com
Currently there is no null check for a failed memory allocation
on the dsb object and without this a null pointer dereference
error can occur. Fix this by adding a null check.
Note: added a drm_err message in keeping with the error message style
in the function.
Addresses-Coverity: ("Dereference null return")
Fixes: afeda4f3b1 ("drm/i915/dsb: Pre allocate and late cleanup of cmd buffer")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200616114221.73971-1-colin.king@canonical.com
Remove the use of dev->archdata.iommu and use the private per-device
pointer provided by IOMMU core code instead.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200625130836.1916-3-joro@8bytes.org
A single Ri mismatch doesn't automatically mean that the link integrity
is broken. Update and check of Ri and Ri' are done asynchronously. In
case an update happens just between the read of Ri' and the check against
Ri there will be a mismatch even if the link integrity is fine otherwise.
Signed-off-by: Oliver Barta <oliver.barta@aptiv.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504123524.7731-1-oliver.barta@aptiv.com
Cross-subsystem Changes:
- Improve dma-buf docs.
Core Changes:
- Add NV15, Q410, Q401 yuv formats.
- Add uncompressed AFBC modifier.
- Add DP helepr for reading Ignore MSA from DPCD.
- Add missing panel type for some panels
- Optimize drm/mm hole handling.
- Constify connector to infoframe functions.
- Add debugfs for VRR monitor range.
Driver Changes:
- Assorted small bugfixes in panfrost, malidp, panel/otm8009a.
- Convert tfp410 dt bindings to yaml, and rework time calculations.
- Add support for a few more simple panels.
- Cleanups and optimizations for ast.
- Allow adv7511 and simple-bridge to be used without connector creation.
- Cleanups to dw-hdmi function prototypes.
- Remove enabled bool from tiny/repaper and mipi-dbi, atomic handles it.
- Remove unused header file from dw-mipi-dsi
- Begin removing ttm_bo->offset.
-----BEGIN PGP SIGNATURE-----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=72wu
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2020-06-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.9:
Cross-subsystem Changes:
- Improve dma-buf docs.
Core Changes:
- Add NV15, Q410, Q401 yuv formats.
- Add uncompressed AFBC modifier.
- Add DP helepr for reading Ignore MSA from DPCD.
- Add missing panel type for some panels
- Optimize drm/mm hole handling.
- Constify connector to infoframe functions.
- Add debugfs for VRR monitor range.
Driver Changes:
- Assorted small bugfixes in panfrost, malidp, panel/otm8009a.
- Convert tfp410 dt bindings to yaml, and rework time calculations.
- Add support for a few more simple panels.
- Cleanups and optimizations for ast.
- Allow adv7511 and simple-bridge to be used without connector creation.
- Cleanups to dw-hdmi function prototypes.
- Remove enabled bool from tiny/repaper and mipi-dbi, atomic handles it.
- Remove unused header file from dw-mipi-dsi
- Begin removing ttm_bo->offset.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b1e53620-7937-895c-bfcf-ed208be59c7c@linux.intel.com
The PL111 DRM driver is now the sole user of the external
CLCD registers header file, so let's absorb that into the
pl111_drm.h file and save the external include.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609200446.153209-3-linus.walleij@linaro.org
This moves over some of the credit for the development of this
driver from the old fbdev driver that I used as reference when
getting this in place.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609200446.153209-1-linus.walleij@linaro.org
The linetime watermark is a 9 bit value, which gives us
a maximum linetime of just below 64 usec. If the linetime
exceeds that value we currently just discard the high bits
and program the rest into the register, which angers the
state checker.
To avoid that let's just clamp the value to the max. I believe
it should be perfectly fine to program a smaller linetime wm
than strictly required, just means the hardware may fetch data
sooner than strictly needed. We are further reassured by the
fact that with DRRS the spec tells us to program the smaller
of the two linetimes corresponding to the two refresh rates.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200625200003.12436-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
We only need the page array when the BO is about to be accessed.
So not only populate, but also create it on demand.
v2: move NULL check into ttm_tt_create()
v3: fix the occurrence in ttm_bo_kmap_ttm as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/373182/
Instead of signaling failure by setting the node pointer to
NULL do so by returning -ENOSPC.
v2: add memset() to make sure that mem is always initialized.
v3: drop memset() only set mm_node = NULL, move mm_node init in amdgpu
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/373181/
Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Alexandre Oliva has recently removed these files from Linux Libre
with concerns that the sources weren't available.
The sources are available on IGT repository, and only open source
tools are used to generate the {ivb,hsw}_clear_kernel.c files.
However, the remaining concern from Alexandre Oliva was around
GPL license and the source not been present when distributing
the code.
So, it looks like 2 alternatives are possible, the use of
linux-firmware.git repository to store the blob or making sure
that the source is also present in our tree. Since the goal
is to limit the i915 firmware to only the micro-controller blobs
let's make sure that we do include the asm sources here in our tree.
Btw, I tried to have some diligence here and make sure that the
asms that these commits are adding are truly the source for
the mentioned files:
igt$ ./scripts/generate_clear_kernel.sh -g ivb \
-m ~/mesa/build/src/intel/tools/i965_asm
Output file not specified - using default file "ivb-cb_assembled"
Generating gen7 CB Kernel assembled file "ivb_clear_kernel.c"
for i915 driver...
igt$ diff ~/i915/drm-tip/drivers/gpu/drm/i915/gt/ivb_clear_kernel.c \
ivb_clear_kernel.c
< * Generated by: IGT Gpu Tools on Fri 21 Feb 2020 05:29:32 AM UTC
> * Generated by: IGT Gpu Tools on Mon 08 Jun 2020 10:00:54 AM PDT
61c61
< };
> };
\ No newline at end of file
igt$ ./scripts/generate_clear_kernel.sh -g hsw \
-m ~/mesa/build/src/intel/tools/i965_asm
Output file not specified - using default file "hsw-cb_assembled"
Generating gen7.5 CB Kernel assembled file "hsw_clear_kernel.c"
for i915 driver...
igt$ diff ~/i915/drm-tip/drivers/gpu/drm/i915/gt/hsw_clear_kernel.c \
hsw_clear_kernel.c
5c5
< * Generated by: IGT Gpu Tools on Fri 21 Feb 2020 05:30:13 AM UTC
> * Generated by: IGT Gpu Tools on Mon 08 Jun 2020 10:01:42 AM PDT
61c61
< };
> };
\ No newline at end of file
Used IGT and Mesa master repositories from Fri Jun 5 2020)
IGT: 53e8c878a6fb ("tests/kms_chamelium: Force reprobe after replugging
the connector")
Mesa: 5d13c7477eb1 ("radv: set keep_statistic_info with
RADV_DEBUG=shaderstats")
Mesa built with: meson build -D platforms=drm,x11 -D dri-drivers=i965 \
-D gallium-drivers=iris -D prefix=/usr \
-D libdir=/usr/lib64/ -Dtools=intel \
-Dkulkan-drivers=intel && ninja -C build
v2: Header clean-up and include build instructions in a readme (Chris)
Modified commit message to respect check-patch
Reference: http://www.fsfla.org/pipermail/linux-libre/2020-June/003374.html
Reference: http://www.fsfla.org/pipermail/linux-libre/2020-June/003375.html
Fixes: 47f8253d2b ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Cc: <stable@vger.kernel.org> # v5.7+
Cc: Alexandre Oliva <lxoliva@fsfla.org>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200610201807.191440-1-rodrigo.vivi@intel.com
(cherry picked from commit 5a7eeb8ba1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The helper uses the MIPI_DCS_SET_TEAR_SCANLINE, although it's currently
using the generic write. This does not look right.
Perhaps some platforms don't distinguish between the two writers?
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Vinay Simha BN <simhavcs@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Fixes: e839508163 ("drm/dsi: Implement set tear scanline")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200505160329.2976059-3-emil.l.velikov@gmail.com
A few of the new panels create a local macro wrapping around
mipi_dsi_dcs_write. At the same time, they don't really care about the
command/payload split.
mipi_dsi_dcs_write does a kmalloc/memcpy/kfree for payload > 7 bytes.
Avoid that all together by using the _buffer function.
Aside:
panel-xinpeng-xpp055c272.c calls its wrapper "generic" although it
should be "dcs". But that for another day/patch.
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200505160329.2976059-2-emil.l.velikov@gmail.com
Currently the function heap allocates when we have any payload. Where in
many case the payload is 1 byte - ouch.
>From casual observation, vast majority of the payloads are smaller than
8 bytes - so use a stack array tx[8] to avoid the senseless kmalloc and
kfree dance.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200505160329.2976059-1-emil.l.velikov@gmail.com
in mic_pre_enable, pm_runtime_get_sync is called which
increments the counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Propagate the proper error codes from the called functions instead of
unconditionally returning 0.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Merge conflict so merged it manually.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
platform_get_irq() will call dev_err() itself on failure,
so there is no need for the driver to also do this.
This is detected by coccinelle.
Signed-off-by: Tamseel Shams <m.shams@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch adds missing BUS fields to the display panel descriptions of
the panels which are found on NVIDIA Tegra devices:
1. AUO B101AW03
2. Chunghwa CLAA070WP03XG
3. Chunghwa CLAA101WA01A
4. Chunghwa CLAA101WB01
5. Innolux N156BGE L21
6. Samsung LTN101NT05
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200621222742.25695-3-digetx@gmail.com
The EDT ET057090DHU panel has a DPI connector and not LVDS. This patch
corrects the panel's description.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: 94f07917eb ("drm/panel-simple: Add missing connector type for some panels")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200621222742.25695-2-digetx@gmail.com
Disable the plane if it's not visible. Otherwise mtk_ovl_layer_config()
would proceed with invalid plane and we may see vblank timeout.
Fixes: 119f517362 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Equivalent information can be nowadays obtained using function tracer.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
GPU address handling is device specific and should be handle by its device
driver.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372937/
Signed-off-by: Christian König <christian.koenig@amd.com>
This patch uses score to select a new drm scheduler for better
loadbalance between multiple drm schedulers instead of num_jobs.
Below are test results after running amdgpu_test for ~10 times.
Before this patch:
sched_name num of many times it got schedule
========= ==================================
sdma0 1463
sdma1 198
comp_1.0.1 280
After this patch:
sched_name num of many times it got schedule
========= ==================================
sdma0 925
sdma1 928
comp_1.0.1 177
comp_1.1.1 44
comp_1.2.1 43
comp_1.3.1 44
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/373000/
Signed-off-by: Christian König <christian.koenig@amd.com>
Store ttm bo->offset in struct nouveau_bo instead.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372932/
Signed-off-by: Christian König <christian.koenig@amd.com>
Calculate GPU offset within vmwgfx driver itself without depending on
bo->offset.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372933/
Signed-off-by: Christian König <christian.koenig@amd.com>
ti-sn65dsi86 bridge is enumerated as a runtime device. When
suspend is triggered, PM core adds a refcount on all the
devices and calls device suspend, since usage count is
already incremented, runtime suspend will not be called
and it kept the bridge regulators and gpios ON which resulted
in platform not entering into XO shutdown.
Add changes to force suspend on the runtime device during pm sleep.
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609120455.20458-1-harigovi@codeaurora.org
* In mcde, set up fbdev after device registration and removde the last access
to dev->dev_private. Fixes an error message and a segmentation fault.
* Set the connector type for LogicPT Type 28 and newhaven_nhd_43_480272ef_atxl
panels.
* In uvesafb, fix the handling of the noblank option.
* Fix panel orientation for Asus T101HA and Acer S1003.
* Fix DMA configuration for sun4i if IOMMU is present.
* Fix regression in VT restoration. Unbreaks userspace (i.e., Xorg) VT handling.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAl70X3MACgkQaA3BHVML
eiPP+ggAnquBWHn4QYVrw4tlcI8supVJurQflcYYYBzPksiijheJAE+74nfCWwTB
aijbyiPSp6tq8aP2NQpasW3pQdo0gQ2I9CwYzCxPTDk3X0iSxGEIToDieBTonmKn
UrvUZCQ5L775XJASus2gH4/b34Y0zIrQfCLj1ECOOSNjUWvTLntWrbJDl8S9SISh
teIAFZ1qAlcrTTNuAZ1lp+e+AlXEXKhi8+CqY0ltiV1q4JtO1SdOMnb5y0rxsYOy
H/KVWbZWdWkgIrZpJ1v/+jio0Mkh0jDi1ldJ6UDxWAv5viQnExICUY1d88Qw2xVo
73w4iJ/ujNIK3kDZQmvLMlVTjc1oSw==
=GRqS
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-06-25' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull (less than what git shortlog provides):
* In mcde, set up fbdev after device registration and removde the last access
to dev->dev_private. Fixes an error message and a segmentation fault.
* Set the connector type for LogicPT Type 28 and newhaven_nhd_43_480272ef_atxl
panels.
* In uvesafb, fix the handling of the noblank option.
* Fix panel orientation for Asus T101HA and Acer S1003.
* Fix DMA configuration for sun4i if IOMMU is present.
* Fix regression in VT restoration. Unbreaks userspace (i.e., Xorg) VT handling.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200625082717.GA14856@linux-uq9g
[Why]
It's useful to know the min and max vrr range for IGT testing.
[How]
Expose the min and max vfreq for the connector via a debugfs file
on the connector, "vrr_range".
Example usage: cat /sys/kernel/debug/dri/0/DP-1/vrr_range
v2:
* Fix the typo in max_vfreq (Manasi)
* Change the name of node to i915_vrr_info so we can add
other vrr info for more debug info (Manasi)
* Change the VRR capable to display Yes or No (Manasi)
* Fix indentation checkpatch errors (Manasi)
v3:
* Remove the unnecessary debug print (Manasi)
v4:
* Rebase
v5:
* Rename to vrr_range to match AMD debugfs
v6:
* Rebase (manasi)
v7:
* Fix cmpilation due to rebase
v8:
* Move debugfs node creation logic to DRM (Emil)
* Remove AMD specific logic (Emil)
v9:
* Separate patch for removal of AMD specific logic (Manasi)
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
CC: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200622142519.16214-3-bhanuprakash.modem@intel.com
The DP spec says:
"The transmitter shall support at least three levels of voltage
swing (Levels 0, 1, and 2).
If only three levels of voltage swing are supported (VOLTAGE
SWING SET field (bits 1:0) are programmed to 10 (Level 2)),
this bit shall be set to 1, and cleared in all other cases.
If all four levels of voltage swing are supported (VOLTAGE
SWING SET field (bits 1:0) are programmed to 11 (Level 3)),
this bit shall be set to 1,and cleared in all other cases."
Let's follow that exactly instead of the current apporach
where we can set those also for vswing/preemph levels 0 or 1
(or 2 when the platform max is 3).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512174145.3186-7-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
I updated my system with Radeon VII from kernel 5.6 to kernel 5.7, and
following started to happen on each boot:
...
BUG: kernel NULL pointer dereference, address: 0000000000000128
...
CPU: 9 PID: 1940 Comm: modprobe Tainted: G E 5.7.2-200.im0.fc32.x86_64 #1
Hardware name: System manufacturer System Product Name/PRIME X570-P, BIOS 1407 04/02/2020
RIP: 0010:lock_bus+0x42/0x60 [amdgpu]
...
Call Trace:
i2c_smbus_xfer+0x3d/0xf0
i2c_default_probe+0xf3/0x130
i2c_detect.isra.0+0xfe/0x2b0
? kfree+0xa3/0x200
? kobject_uevent_env+0x11f/0x6a0
? i2c_detect.isra.0+0x2b0/0x2b0
__process_new_driver+0x1b/0x20
bus_for_each_dev+0x64/0x90
? 0xffffffffc0f34000
i2c_register_driver+0x73/0xc0
do_one_initcall+0x46/0x200
? _cond_resched+0x16/0x40
? kmem_cache_alloc_trace+0x167/0x220
? do_init_module+0x23/0x260
do_init_module+0x5c/0x260
__do_sys_init_module+0x14f/0x170
do_syscall_64+0x5b/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
...
Error appears when some i2c device driver tries to probe for devices
using adapter registered by `smu_v11_0_i2c_eeprom_control_init()`.
Code supporting this adapter requires `adev->psp.ras.ras` to be not
NULL, which is true only when `amdgpu_ras_init()` detects HW support by
calling `amdgpu_ras_check_supported()`.
Before 9015d60c9e, adapter was registered by
-> amdgpu_device_ip_init()
-> amdgpu_ras_recovery_init()
-> amdgpu_ras_eeprom_init()
-> smu_v11_0_i2c_eeprom_control_init()
after verifying that `adev->psp.ras.ras` is not NULL in
`amdgpu_ras_recovery_init()`. Currently it is registered
unconditionally by
-> amdgpu_device_ip_init()
-> pp_sw_init()
-> hwmgr_sw_init()
-> vega20_smu_init()
-> smu_v11_0_i2c_eeprom_control_init()
Fix simply adds HW support check (ras == NULL => no support) before
calling `smu_v11_0_i2c_eeprom_control_{init,fini}()`.
Please note that there is a chance that similar fix is also required for
CHIP_ARCTURUS. I do not know whether any actual Arcturus hardware without
RAS exist, and whether calling `smu_i2c_eeprom_init()` makes any sense
when there is no HW support.
Cc: stable@vger.kernel.org
Fixes: 9015d60c9e ("drm/amdgpu: Move EEPROM I2C adapter to amdgpu_device")
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Tested-by: Bjorn Nostvold <bjorn.nostvold@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Catch up with upstream, in particular to get c1e8d7c6a7 ("mmap locking
API: convert mmap_sem comments").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Switch over to GEM VRAM's implementation to retrieve bo->offset.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372931/
Calculate GEM VRAM bo's offset within vram-helper without depending on
bo->offset.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372938/
This patch removes slot->gpu_offset which is not required as
VRAM and PRIV slot are in separate PCI bar.
This patch also removes unused qxl_bo_gpu_offset()
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372934/
Calculate GPU offset in radeon_bo_gpu_offset without depending on
bo->offset.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-and-tested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372935/
GPU address should belong to driver not in memory management.
This patch moves ttm bo.offset and gpu_offset calculation to amdgpu driver.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/372930/
dw-mipi-dsi does not use any definition from drm_probe_helper.
Coverity output:
Event unnecessary_header:
Including .../include/drm/drm_probe_helper.h does not provide any
needed symbols.
Reviewed-by: Yannick Fertre <yannick.fertre@st.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Jose Abreu <jose.abreu@synopsys.com>
Signed-off-by: Angelo Ribeiro <angelo.ribeiro@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/171ff1fb3918664a570dc8f2f34b446612505f76.1585832665.git.angelo.ribeiro@synopsys.com
