Commit Graph

264448 Commits

Author SHA1 Message Date
Matthew Wilcox
58ffacb545 NVMe: Add a module parameter to use a threaded interrupt
We're currently calling bio_endio from hard interrupt context.  This is
not a good idea for preemptible kernels as it will cause longer latencies.
Using a threaded interrupt will run the entire queue processing mechanism
(including bio_endio) in a thread, which can be preempted.  Unfortuantely,
it also adds about 7us of latency to the single-I/O case, so make it a
module parameter for the moment.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:55 -04:00
Matthew Wilcox
b1ad37efca NVMe: Call put_nvmeq() before calling nvme_submit_sync_cmd()
We can't have preemption disabled when we call schedule().  Accept the
possibility that we'll get preempted, and it'll cost us some cacheline
bounces.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:55 -04:00
Matthew Wilcox
3c0cf138d7 NVMe: Allow fatal signals to interrupt I/O
If the user sends a fatal signal, sleeping in the TASK_KILLABLE state
permits the task to be aborted.  The only wrinkle is making sure that
if/when the command completes later that it doesn't upset anything.
Handle this by setting the data pointer to 0, and checking the value
isn't NULL in the sync completion path.  Eventually, bios can be cancelled
through this path too.  Note that the cmdid isn't freed to prevent reuse.

We should also abort the command in the future, but this is a good start.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:55 -04:00
Matthew Wilcox
db5d0c198d NVMe: Release 0.2
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:54 -04:00
Matthew Wilcox
6ee44cdced NVMe: Add download / activate firmware ioctls
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:54 -04:00
Matthew Wilcox
7a63e07b9a NVMe: Add remaining status codes
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:54 -04:00
Matthew Wilcox
388f037f4e NVMe: Move sysfs entries to the right place
Because I wasn't setting driverfs_dev, the devices were showing up under
/sys/devices/virtual/block.  Now they appear underneath the PCI device
which they belong to.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:54 -04:00
Shane Michael Matthews
5911f20039 NVMe: Disable the device before we write the admin queues
In case the card has been left in a partially-configured state,
write 0 to the Enable bit.

Signed-off-by: Shane Michael Matthews <shane.matthews@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:54 -04:00
Matthew Wilcox
574e8b95bc NVMe: Request I/O regions
Calling pci_request_selected_regions() reserves these regions for our use.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:54 -04:00
Matthew Wilcox
2930353f9f NVMe: Allow queues to be allocated above 4GB
Need to call dma_set_coherent_mask() to allow queues to be allocated
above 4GB.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:53 -04:00
Matthew Wilcox
f64d3365a3 NVMe: Enable device DMA
Need to call pci_set_master() to enable device DMA

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:53 -04:00
Shane Michael Matthews
0ee5a7d7cb NVMe: Enable and disable the PCI device
Call pci_enable_device_mem() at initialisation and pci_disable_device
at exit.

Signed-off-by: Shane Michael Matthews <shane.matthews@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:53 -04:00
Matthew Wilcox
3f85d50b60 NVMe: Check returns from nvme_alloc_queue()
It can return NULL, so handle that.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:53 -04:00
Matthew Wilcox
8e9f0e7115 NVMe: Remove 'node' from nvme_dev
We don't keep a list of nvme_dev any more

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:53 -04:00
Matthew Wilcox
51814232ec NVMe: Read the model, serial & firmware rev from the controller
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:53 -04:00
Matthew Wilcox
a53295b699 NVMe: Add NVME_IOCTL_SUBMIT_IO
Allow userspace to submit synchronous I/O like the SCSI sg interface does.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:53 -04:00
Matthew Wilcox
7fc3cdabba NVMe: Create nvme_map_user_pages() and nvme_unmap_user_pages()
These are generalisations of the code that was in
nvme_submit_user_admin_command().

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:52 -04:00
Matthew Wilcox
bd38c5557c NVMe: Change NVME_IOCTL_GET_RANGE_TYPE to return all the ranges
Factor out most of nvme_identify() into a new nvme_submit_user_admin_command()
function.  Change nvme_get_range_type() to call it and change nvme_ioctl to
realise that it's getting back all 64 ranges.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:52 -04:00
Matthew Wilcox
b8deb62cf2 NVMe: Zero the command before we send it
Make sure there's no left-over bits set from previous commands that used
this slot.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:52 -04:00
Matthew Wilcox
ff22b54fda NVMe: Add nvme_setup_prps()
Generalise the code from nvme_identify() that sets PRP1 & PRP2 so that
it's usable for commands sent by nvme_submit_bio_queue().

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:52 -04:00
Matthew Wilcox
7b4fe9b1cb NVMe: Make nvme_common_command more featureful
Add prp1, prp2 and the metadata prp to the common command, since the
fields are generally used this way.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:52 -04:00
Matthew Wilcox
36c14ed9ca NVMe: Use PRP2 for the nvme_identify ioctl
DMA the result straight to userspace instead of bounce-buffering in the
kernel.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:52 -04:00
Matthew Wilcox
53c9577e9c NVMe: Fix admin IRQ claim on real hardware
The admin IRQ is supposed to use the pin-based (or single message MSI)
interrupt.  Accomplish this by filling in entry[0]'s vector with the
INTx irq number.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:51 -04:00
Matthew Wilcox
821234603b NVMe: Rename 'cycle' to 'phase'
It's called the phase bit in the current draft

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:51 -04:00
Matthew Wilcox
1b23484bd0 NVMe: Implement per-CPU queues
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:51 -04:00
Matthew Wilcox
b3b06812e1 NVMe: Reduce set_queue_count arguments by one
sq_count and cq_count are always the same, so just call it 'count'.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:51 -04:00
Matthew Wilcox
3001082cac NVMe: Factor out queue_request_irq()
Two callers with an almost identical long string of arguments, and
introducing a third soon.  Time to factor out the commonalities.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:51 -04:00
Matthew Wilcox
b60503ba43 NVMe: New driver
This driver is for devices that follow the NVM Express standard

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:52:51 -04:00
Matthew Wilcox
0b934ccd70 Xen: Export xen_biovec_phys_mergeable
When Xen is enabled, using BIOVEC_PHYS_MERGEABLE in a module
causes xen_biovec_phys_mergeable to be referenced, so it needs
to be exported.

Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
2011-11-04 15:41:27 -04:00
Linus Torvalds
c3b92c8787 Linux 3.1 2011-10-24 09:10:05 +02:00
Linus Torvalds
6a0596583f Merge git://git.infradead.org/iommu-2.6
* git://git.infradead.org/iommu-2.6:
  intel-iommu: fix superpage support in pfn_to_dma_pte()
  intel-iommu: set iommu_superpage on VM domains to lowest common denominator
  intel-iommu: fix return value of iommu_unmap() API
  MAINTAINERS: Update VT-d entry for drivers/pci -> drivers/iommu move
  intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.
  intel-iommu: Workaround IOTLB hang on Ironlake GPU
  intel-iommu: Fix AB-BA lockdep report
2011-10-24 07:08:24 +02:00
Linus Torvalds
15cc910112 Merge branch 'for-linus' of http://people.redhat.com/agk/git/linux-dm
* 'for-linus' of http://people.redhat.com/agk/git/linux-dm:
  dm kcopyd: fix job_pool leak
2011-10-24 07:05:38 +02:00
Takashi Iwai
8548c84da2 x86: Fix S4 regression
Commit 4b239f458 ("x86-64, mm: Put early page table high") causes a S4
regression since 2.6.39, namely the machine reboots occasionally at S4
resume.  It doesn't happen always, overall rate is about 1/20.  But,
like other bugs, once when this happens, it continues to happen.

This patch fixes the problem by essentially reverting the memory
assignment in the older way.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Yinghai Lu <yinghai.lu@oracle.com>
[ We'll hopefully find the real fix, but that's too late for 3.1 now ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-24 06:55:20 +02:00
Alasdair G Kergon
d136f2efdf dm kcopyd: fix job_pool leak
Fix memory leak introduced by commit a6e50b409d
(dm snapshot: skip reading origin when overwriting complete chunk).

When allocating a set of jobs from kc->job_pool, job->master_job must be
set (to point to itself) so that the mempool item gets freed when the
master_job completes.

master_job was introduced by commit c6ea41fbbe
(dm kcopyd: preallocate sub jobs to avoid deadlock)

Reported-by: Michael Leun <ml@newton.leun.net>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2011-10-23 20:55:17 +01:00
Linus Torvalds
1bf1aacedc Merge branch 'samsung-fixes-4' of git://github.com/kgene/linux-samsung
* 'samsung-fixes-4' of git://github.com/kgene/linux-samsung:
  ARM: S3C24XX: Fix s3c24xx build errors if !CONFIG_PM
  ARM: S5P: fix offset calculation on gpio-interrupt
2011-10-23 10:44:40 +03:00
Linus Torvalds
5117cc25fd Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (w83627ehf) Fix negative 8-bit temperature values
2011-10-23 10:43:31 +03:00
Domenico Andreoli
fb630b9fc9 ARM: S3C24XX: Fix s3c24xx build errors if !CONFIG_PM
v2:
- register_syscore_ops(&s3c24xx_irq_syscore_ops) does not need to be
  conditionally compiled out, it is already optimized out on !CONFIG_PM
- fix also s3c2412 and s3c2416 affected by the same build issue

v1:
s3c2440.c fails to build if !CONFIG_PM because in such case
s3c2410_pm_syscore_ops is not defined. Same error should happen also
in s3c2410.c and s3c2442.c

Signed-off-by: Domenico Andreoli <cavokz@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-22 04:00:53 +09:00
Linus Torvalds
2efd7c0fdc Merge git://github.com/herbertx/crypto
* git://github.com/herbertx/crypto:
  crypto: ghash - Avoid null pointer dereference if no key is set
2011-10-21 17:02:18 +03:00
Linus Torvalds
62ddc0046e Merge branch 'fix/hda' of git://github.com/tiwai/sound
* 'fix/hda' of git://github.com/tiwai/sound:
  ALSA: HDA: conexant support for Lenovo T520/W520
  ALSA: hda - Add position_fix quirk for Dell Inspiron 1010
2011-10-21 17:01:21 +03:00
Nick Bowler
7ed47b7d14 crypto: ghash - Avoid null pointer dereference if no key is set
The ghash_update function passes a pointer to gf128mul_4k_lle which will
be NULL if ghash_setkey is not called or if the most recent call to
ghash_setkey failed to allocate memory.  This causes an oops.  Fix this
up by returning an error code in the null case.

This is trivially triggered from unprivileged userspace through the
AF_ALG interface by simply writing to the socket without setting a key.

The ghash_final function has a similar issue, but triggering it requires
a memory allocation failure in ghash_setkey _after_ at least one
successful call to ghash_update.

  BUG: unable to handle kernel NULL pointer dereference at 00000670
  IP: [<d88c92d4>] gf128mul_4k_lle+0x23/0x60 [gf128mul]
  *pde = 00000000
  Oops: 0000 [#1] PREEMPT SMP
  Modules linked in: ghash_generic gf128mul algif_hash af_alg nfs lockd nfs_acl sunrpc bridge ipv6 stp llc

  Pid: 1502, comm: hashatron Tainted: G        W   3.1.0-rc9-00085-ge9308cf #32 Bochs Bochs
  EIP: 0060:[<d88c92d4>] EFLAGS: 00000202 CPU: 0
  EIP is at gf128mul_4k_lle+0x23/0x60 [gf128mul]
  EAX: d69db1f0 EBX: d6b8ddac ECX: 00000004 EDX: 00000000
  ESI: 00000670 EDI: d6b8ddac EBP: d6b8ddc8 ESP: d6b8dda4
   DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
  Process hashatron (pid: 1502, ti=d6b8c000 task=d6810000 task.ti=d6b8c000)
  Stack:
   00000000 d69db1f0 00000163 00000000 d6b8ddc8 c101a520 d69db1f0 d52aa000
   00000ff0 d6b8dde8 d88d310f d6b8a3f8 d52aa000 00001000 d88d502c d6b8ddfc
   00001000 d6b8ddf4 c11676ed d69db1e8 d6b8de24 c11679ad d52aa000 00000000
  Call Trace:
   [<c101a520>] ? kmap_atomic_prot+0x37/0xa6
   [<d88d310f>] ghash_update+0x85/0xbe [ghash_generic]
   [<c11676ed>] crypto_shash_update+0x18/0x1b
   [<c11679ad>] shash_ahash_update+0x22/0x36
   [<c11679cc>] shash_async_update+0xb/0xd
   [<d88ce0ba>] hash_sendpage+0xba/0xf2 [algif_hash]
   [<c121b24c>] kernel_sendpage+0x39/0x4e
   [<d88ce000>] ? 0xd88cdfff
   [<c121b298>] sock_sendpage+0x37/0x3e
   [<c121b261>] ? kernel_sendpage+0x4e/0x4e
   [<c10b4dbc>] pipe_to_sendpage+0x56/0x61
   [<c10b4e1f>] splice_from_pipe_feed+0x58/0xcd
   [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10
   [<c10b51f5>] __splice_from_pipe+0x36/0x55
   [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10
   [<c10b6383>] splice_from_pipe+0x51/0x64
   [<c10b63c2>] ? default_file_splice_write+0x2c/0x2c
   [<c10b63d5>] generic_splice_sendpage+0x13/0x15
   [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10
   [<c10b527f>] do_splice_from+0x5d/0x67
   [<c10b6865>] sys_splice+0x2bf/0x363
   [<c129373b>] ? sysenter_exit+0xf/0x16
   [<c104dc1e>] ? trace_hardirqs_on_caller+0x10e/0x13f
   [<c129370c>] sysenter_do_call+0x12/0x32
  Code: 83 c4 0c 5b 5e 5f c9 c3 55 b9 04 00 00 00 89 e5 57 8d 7d e4 56 53 8d 5d e4 83 ec 18 89 45 e0 89 55 dc 0f b6 70 0f c1 e6 04 01 d6 <f3> a5 be 0f 00 00 00 4e 89 d8 e8 48 ff ff ff 8b 45 e0 89 da 0f
  EIP: [<d88c92d4>] gf128mul_4k_lle+0x23/0x60 [gf128mul] SS:ESP 0068:d6b8dda4
  CR2: 0000000000000670
  ---[ end trace 4eaa2a86a8e2da24 ]---
  note: hashatron[1502] exited with preempt_count 1
  BUG: scheduling while atomic: hashatron/1502/0x10000002
  INFO: lockdep is turned off.
  [...]

Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
Cc: stable@kernel.org [2.6.37+]
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-10-21 13:18:42 +02:00
Marek Szyprowski
1052cff317 ARM: S5P: fix offset calculation on gpio-interrupt
Offsets of the irq controller registers were calculated
correctly only for first GPIO bank. This patch fixes
calculation of the register offsets for all GPIO banks.

Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-10-21 18:05:02 +09:00
Linus Torvalds
fd11e153b8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Add alignment flag to PCI expansion resources
  sparc: Avoid calling sigprocmask()
  sparc: Use set_current_blocked()
  sparc32,leon: SRMMU MMU Table probe fix
2011-10-20 22:16:28 +03:00
Linus Torvalds
505f48b534 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  fib_rules: fix unresolved_rules counting
  r8169: fix wrong eee setting for rlt8111evl
  r8169: fix driver shutdown WoL regression.
  ehea: Change maintainer to me
  pptp: pptp_rcv_core() misses pskb_may_pull() call
  tproxy: copy transparent flag when creating a time wait
  pptp: fix skb leak in pptp_xmit()
  bonding: use local function pointer of bond->recv_probe in bond_handle_frame
  smsc911x: Add support for SMSC LAN89218
  tg3: negate USE_PHYLIB flag check
  netconsole: enable netconsole can make net_device refcnt incorrent
  bluetooth: Properly clone LSM attributes to newly created child connections
  l2tp: fix a potential skb leak in l2tp_xmit_skb()
  bridge: fix hang on removal of bridge via netlink
  x25: Prevent skb overreads when checking call user data
  x25: Handle undersized/fragmented skbs
  x25: Validate incoming call user data lengths
  udplite: fast-path computation of checksum coverage
  IPVS netns shutdown/startup dead-lock
  netfilter: nf_conntrack: fix event flooding in GRE protocol tracker
2011-10-20 22:15:20 +03:00
Jean Delvare
133d324d82 hwmon: (w83627ehf) Fix negative 8-bit temperature values
Since 8-bit temperature values are now handled in 16-bit struct
members, values have to be cast to s8 for negative temperatures to be
properly handled. This is broken since kernel version 2.6.39
(commit bce26c58df86599c9570cee83eac58bdaae760e4.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@kernel.org	# 2.6.39+
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-20 07:17:08 -07:00
Hugh Dickins
486cf46f3f mm: fix race between mremap and removing migration entry
I don't usually pay much attention to the stale "? " addresses in
stack backtraces, but this lucky report from Pawel Sikora hints that
mremap's move_ptes() has inadequate locking against page migration.

 3.0 BUG_ON(!PageLocked(p)) in migration_entry_to_page():
 kernel BUG at include/linux/swapops.h:105!
 RIP: 0010:[<ffffffff81127b76>]  [<ffffffff81127b76>]
                       migration_entry_wait+0x156/0x160
  [<ffffffff811016a1>] handle_pte_fault+0xae1/0xaf0
  [<ffffffff810feee2>] ? __pte_alloc+0x42/0x120
  [<ffffffff8112c26b>] ? do_huge_pmd_anonymous_page+0xab/0x310
  [<ffffffff81102a31>] handle_mm_fault+0x181/0x310
  [<ffffffff81106097>] ? vma_adjust+0x537/0x570
  [<ffffffff81424bed>] do_page_fault+0x11d/0x4e0
  [<ffffffff81109a05>] ? do_mremap+0x2d5/0x570
  [<ffffffff81421d5f>] page_fault+0x1f/0x30

mremap's down_write of mmap_sem, together with i_mmap_mutex or lock,
and pagetable locks, were good enough before page migration (with its
requirement that every migration entry be found) came in, and enough
while migration always held mmap_sem; but not enough nowadays, when
there's memory hotremove and compaction.

The danger is that move_ptes() lets a migration entry dodge around
behind remove_migration_pte()'s back, so it's in the old location when
looking at the new, then in the new location when looking at the old.

Either mremap's move_ptes() must additionally take anon_vma lock(), or
migration's remove_migration_pte() must stop peeking for is_swap_entry()
before it takes pagetable lock.

Consensus chooses the latter: we prefer to add overhead to migration
than to mremapping, which gets used by JVMs and by exec stack setup.

Reported-and-tested-by: Paweł Sikora <pluto@agmk.net>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-19 23:42:58 -07:00
Kjetil Oftedal
aad4564498 sparc: Add alignment flag to PCI expansion resources
Currently no type of alignment is specified for PCI expansion roms while 
parsing the openfirmware tree. This causes calls to pci_map_rom() to fail.
IORESOURCE_SIZEALIGN is the default alignment used for rom resouces in 
pci/probe.c, and has been verified to work with various cards on a ultra 10.

Signed-off-By: Kjetil Oftedal <oftedal@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19 16:20:50 -07:00
Yan, Zheng
afaef734e5 fib_rules: fix unresolved_rules counting
we should decrease ops->unresolved_rules when deleting a unresolved rule.

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19 19:17:41 -04:00
hayeswang
1b23a3e3d1 r8169: fix wrong eee setting for rlt8111evl
Correct the wrong parameter for setting EEE for RTL8111E-VL.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19 18:48:17 -04:00
françois romieu
649b3b8c4e r8169: fix driver shutdown WoL regression.
Due to commit 92fc43b415 ("r8169: modify the
flow of the hw reset."), rtl8169_hw_reset stomps during driver shutdown on
RxConfig bits which are needed for WOL on some versions of the hardware.

As these bits were formerly set from the r81{0x, 68}_pll_power_down methods,
factor them out for use in the driver shutdown (rtl_shutdown) handler.

I favored __rtl8169_get_wol() -hardware state indication- over
RTL_FEATURE_WOL as the latter has become a good candidate for removal.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Hayes <hayeswang@realtek.com>
Tested-by: Marc Ballarin <ballarin.marc@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19 17:08:21 -04:00
Thadeu Lima de Souza Cascardo
34b1901abd ehea: Change maintainer to me
Breno Leitao has passed the maintainership to me.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Cc: Breno Leitao <leitao@linux.vnet.ibm.com>
Acked-by: Breno Leitão <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19 16:01:20 -04:00