The test plan for TAP needs to be declared immediately after the header.
This adds the test plan API to kselftest.h and updates all callers to
declare their expected test counts.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since sub-testing can now be detected by indentation level, this removes
KSFT_TAP_LEVEL so that subtests report their TAP header for later parsing.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This changes the selftest output so that each test's output is prefixed
with "# " as a TAP "diagnostic line".
This creates a bit of a kernel-specific TAP dialect where the diagnostics
precede the results. The TAP spec isn't entirely clear about this, though,
so I think it's the correct solution so as to keep interactive runs making
sense. If the output _followed_ the result line in the spec-suggested
YAML form, each test would dump all of its output at once instead of as
it went, making debugging harder.
This does, however, solve the recursive TAP output problem, as sub-tests
will simply be prefixed by "# ". Parsing sub-tests becomes a simple
problem of just removing the first two characters of a given top-level
test's diagnostic output, and parsing the results.
Note that the shell construct needed to both get an exit code from
the first command in a pipe and still filter the pipe (to add the "# "
prefix) uses a POSIX solution rather than the bash "pipefail" option
which is not supported by dash.
Since some test environments may have a very minimal set of utilities
available, the new prefixing code will fall back to doing line-at-a-time
prefixing if perl and/or stdbuf are not available.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If a test was missing (e.g. wrong architecture, etc), the test runner
would incorrectly claim the test was non-executable. This adds an
existence check to report correctly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The TAP version 13 spec requires a "plan" line, which has been missing.
Since we always know how many tests we're going to run, emit the count on
the plan line. This also fixes the result lines to remove the "1.." prefix
which is against spec, and to mark skips with the correct "# SKIP" suffix.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This moves the logic for running multiple tests into a single "run_many"
function of runner.sh. Both "run_tests" and "emit_tests" are modified to
use it. Summary handling is now controlled by the "per_test_logging"
shell flag.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This reuses the new runner.sh for the emit targets instead of manually
running each test via run_kselftest.sh.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In order to improve the reusability of the kselftest test running logic,
this extracts the single-test logic from lib.mk into kselftest/runner.sh
which lib.mk can call directly. No changes in output.
As part of the change, this moves the "summary" Makefile logic around
to set a new "logfile" output. This will be used again in the future
"emit_tests" target as well.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Build and run gpio when output directory is the src dir. gpio has
dependency on tools/gpio and builds tools/gpio objects in the src
directory in all cases making the src repo dirty even when object
relocation is specified.
This fixes the following commands from generating gpio objects in
the source repository:
make O=dir kselftest
export KBUILD_OUTPUT=dir; make kselftest
make O=dir -C tools/testing/selftests
expoert KBUILD_OUTPUT=dir; make -C tools/testing/selftests
The following commands still build gpio objects in the source repo
(gpio Makefile needs to fixed):
make O=dir kselftest TARGETS="gpio"
export KBUILD_OUTPUT=dir; make kselftest TARGETS="gpio"
make O=dir -C tools/testing/selftests TARGETS="gpio"
expoert KBUILD_OUTPUT=dir; make -C tools/testing/selftests TARGETS="gpio"
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This fixes the various compiler warnings when building the msgque
selftest. The primary change is using sys/msg.h instead of linux/msg.h
directly to gain the API declarations.
Fixes: 3a665531a3 ("selftests: IPC message queue copy feature test")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Test files created by test_create() and test_create_empty() tests will
stay in the $efivarfs_mount directory until the system was rebooted.
When the tester tries to run this efivarfs test again on the same
system, the immutable characteristics in that directory will cause some
"Operation not permitted" noises, and a false-positve test result as the
file was created in previous run.
--------------------
running test_create
--------------------
./efivarfs.sh: line 59: /sys/firmware/efi/efivars/test_create-210be57c-9849-4fc7-a635-e6382d1aec27: Operation not permitted
[PASS]
--------------------
running test_create_empty
--------------------
./efivarfs.sh: line 78: /sys/firmware/efi/efivars/test_create_empty-210be57c-9849-4fc7-a635-e6382d1aec27: Operation not permitted
[PASS]
--------------------
Create a file_cleanup() to remove those test files in the end of each
test to solve this issue.
For the test_create_read, we can move the clean up task to the end of
the test to ensure the system is clean.
Also, use this function to replace the existing file removal code.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
"make kselftest" fails with "Circular Makefile.o <- prepare dependency
dropped." error, when lib.mk invokes "make headers_install".
Make level 0: Main make calls selftests run_tests target
...
Make level n: selftests lib.mk invokes main make's headers_install
The secondary level make inherits builtin-rules which will use the rule
to generate Makefile.o and runs into "Circular Makefile.o <- prepare
dependency dropped." error, and kselftest compile fails.
Invoke headers_install target with --no-builtin-rules to avoid circular
error.
In addition, lib.mk installs headers in the default HDR_PATH, even when
build relocation is requested with O= or export KBUILD_OUTPUT. Fix the
problem by passing in INSTALL_HDR_PATH. The headers are installed under
the specified output "dir/usr".
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The get_secureboot_mode() function unnecessarily requires both
CONFIG_EFIVAR_FS and CONFIG_EFI_VARS to be enabled to determine if the
system is booted in secure boot mode. On some systems the old EFI
variable support is not enabled or, possibly, even implemented.
This patch first checks the efivars filesystem for the SecureBoot and
SetupMode flags, but falls back to using the old EFI variable support.
The "secure_boot_file" and "setup_mode_file" couldn't be quoted due to
globbing. This patch also removes the globbing.
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Verify IMA is enabled before failing tests or emitting irrelevant
messages.
Suggested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Skip the kexec_load and kexec_file_load tests, if they aren't configured
in the kernel. This change adds a new requirement that ikconfig is
configured in the kexec_load test.
Suggested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
so the file can be used as kernel config snippet.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
[zohar@linux.ibm.com: remove CONFIG_KEXEC_VERIFY_SIG from config]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kernel can be configured to verify PE signed kernel images, IMA
kernel image signatures, both types of signatures, or none. This test
verifies only properly signed kernel images are loaded into memory,
based on the kernel configuration and runtime policies.
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Many tests require root privileges. Define a common function.
Suggested-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Define, update and move get_secureboot_mode() to a common file for use
by other tests.
Updated to check both the efivar SecureBoot-$(UUID) and
SetupMode-$(UUID), based on Dave Young's review.
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Remove the few bashisms and use the complete option name for clarity.
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
As requested move the existing kexec_load selftest and subsequent kexec
tests to the selftests/kexec directory.
Suggested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In order to keep tests from hanging forever, this adds an alarm signal
to each test run. This assumes an individual test doesn't take longer
than 30 seconds.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When running without USERNS or PIDNS the seccomp test would hang since
it was waiting forever for the child to trigger the user notification
since it seems the glibc() abort handler makes a call to getpid(),
which would trap again. This changes the getpid filter to getppid, and
makes sure ASSERTs execute to stop from spawning the listener.
Reported-by: Shuah Khan <shuah@kernel.org>
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org # > 5.0
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Dan reported, that cleanup path in test_memcg_subtree_control()
triggers a static checker warning:
./tools/testing/selftests/cgroup/test_memcontrol.c:76 \
test_memcg_subtree_control()
error: uninitialized symbol 'child2'.
Fix this by initializing child2 and parent2 variables and
split the cleanup path into few stages.
Signed-off-by: Roman Gushchin <guro@fb.com>
Fixes: 84092dbcf9 ("selftests: cgroup: add memory controller self-tests")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
After the first run, the test case 'test_create_read' will always
fail because the file is exist and file's attr is 'S_IMMUTABLE',
open with 'O_RDWR' will always return -EPERM.
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
On smaller systems, running a test with 200 threads can take a long
time on machines with smaller number of CPUs.
Detect the number of online cpus at test runtime, and multiply that
by 6 to have 6 rseq threads per cpu preempting each other.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: linux-kselftest@vger.kernel.org
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Chris Lameter <cl@linux.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Add a test module for the new strscpy_pad() function. Tie it into the
kselftest infrastructure for lib/ tests.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
We have a function to copy strings safely and we have a function to copy
strings and zero the tail of the destination (if source string is
shorter than destination buffer) but we do not have a function to do
both at once. This means developers must write this themselves if they
desire this functionality. This is a chore, and also leaves us open to
off by one errors unnecessarily.
Add a function that calls strscpy() then memset()s the tail to zero if
the source string is shorter than the destination buffer.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
We just added a new C header file for use with test modules that are
intended to be run with kselftest. We can reduce code duplication by
using this header.
Use new kselftest header to reduce code duplication in test_printf and
test_bitmap test modules.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
kselftest runs as a userspace process. Sometimes we need to test things
from kernel space. One way of doing this is by creating a test module.
Currently doing so requires developers to write a bunch of boiler plate
in the module if kselftest is to be used to run the tests. This means
we currently have a load of duplicate code to achieve these ends. If we
have a uniform method for implementing test modules then we can reduce
code duplication, ensure uniformity in the test framework, ease code
maintenance, and reduce the work required to create tests. This all
helps to encourage developers to write and run tests.
Add a C header file that can be included in test modules. This provides
a single point for common test functions/macros. Implement a few macros
that make up the start of the test framework.
Add documentation for new kselftest header to kselftest documentation.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Currently if we wish to use kselftest to run tests within a kernel
module we write a small script to load/unload and do error reporting.
There are a bunch of these under tools/testing/selftests/lib/ that are
all identical except for the test name. We can reduce code duplication
and improve maintainability if we have one version of this. However
kselftest requires an executable for each test. We can move all the
script logic to a central script then have each individual test script
call the main script.
Oneliner to call kselftest_module.sh courtesy of Kees, thanks!
Add test runner creation script. Convert
tools/testing/selftests/lib/*.sh to use new test creation script.
Testing
-------
Configure kselftests for lib/ then build and boot kernel. Then run
kselftests as follows:
$ cd /path/to/kernel/tree
$ sudo make O=$output_path -C tools/testing/selftests TARGETS="lib" run_tests
and also
$ cd /path/to/kernel/tree
$ cd tools/testing/selftests
$ sudo make O=$output_path TARGETS="lib" run_tests
and also
$ cd /path/to/kernel/tree
$ cd tools/testing/selftests
$ sudo make TARGETS="lib" run_tests
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Currently the test_printf module does not have an exit function, this
prevents the module from being unloaded. If we cannot unload the
module we cannot run the tests a second time.
Add an empty exit function.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
A collection of fixes from the last few weeks. Most of them are smaller
tweaks and fixes to DT and hardware descriptions for boards. Some of the
more significant ones are:
- eMMC and RGMII stability tweaks for rk3288
- DDC fixes for Rock PI 4
- Audio fixes for two TI am335x eval boards
- D_CAN clock fix for am335x
- Compilation fixes for clang
- !SMP compilation fix for one of the new platforms this release (milbeaut)
- A revert of a gpio fix for nomadik that instead was fixed in the gpio
subsystem
- Whitespace fix for the DT JSON schema (no tabs allowed)
-----BEGIN PGP SIGNATURE-----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=Vxr8
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes from the last few weeks. Most of them are
smaller tweaks and fixes to DT and hardware descriptions for boards.
Some of the more significant ones are:
- eMMC and RGMII stability tweaks for rk3288
- DDC fixes for Rock PI 4
- Audio fixes for two TI am335x eval boards
- D_CAN clock fix for am335x
- Compilation fixes for clang
- !HOTPLUG_CPU compilation fix for one of the new platforms this
release (milbeaut)
- A revert of a gpio fix for nomadik that instead was fixed in the
gpio subsystem
- Whitespace fix for the DT JSON schema (no tabs allowed)"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
ARM: milbeaut: fix build with !CONFIG_HOTPLUG_CPU
ARM: iop: don't use using 64-bit DMA masks
ARM: orion: don't use using 64-bit DMA masks
Revert "ARM: dts: nomadik: Fix polarity of SPI CS"
dt-bindings: cpu: Fix JSON schema
arm/mach-at91/pm : fix possible object reference leak
ARM: dts: at91: Fix typo in ISC_D0 on PC9
ARM: dts: Fix dcan clkctrl clock for am3
reset: meson-audio-arb: Fix missing .owner setting of reset_controller_dev
dt-bindings: reset: meson-g12a: Add missing USB2 PHY resets
ARM: dts: rockchip: Remove #address/#size-cells from rk3288-veyron gpio-keys
ARM: dts: rockchip: Remove #address/#size-cells from rk3288 mipi_dsi
ARM: dts: rockchip: Fix gpu opp node names for rk3288
ARM: dts: am335x-evmsk: Correct the regulators for the audio codec
ARM: dts: am335x-evm: Correct the regulators for the audio codec
ARM: OMAP2+: add missing of_node_put after of_device_is_available
ARM: OMAP1: ams-delta: Fix broken GPIO ID allocation
arm64: dts: stratix10: add the sysmgr-syscon property from the gmac's
arm64: dts: rockchip: fix rk3328 sdmmc0 write errors
arm64: dts: rockchip: fix rk3328 rgmii high tx error rate
...
-----BEGIN PGP SIGNATURE-----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=8et7
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190407' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Fixups for the pf/pcd queue handling (YueHaibing)
- Revert of the three direct issue changes as they have been proven to
cause an issue with dm-mpath (Bart)
- Plug rq_count reset fix (Dongli)
- io_uring double free in fileset registration error handling (me)
- Make null_blk handle bad numa node passed in (John)
- BFQ ifdef fix (Konstantin)
- Flush queue leak fix (Shenghui)
- Plug trace fix (Yufen)
* tag 'for-linus-20190407' of git://git.kernel.dk/linux-block:
xsysace: Fix error handling in ace_setup
null_blk: prevent crash from bad home_node value
block: Revert v5.0 blk_mq_request_issue_directly() changes
paride/pcd: Fix potential NULL pointer dereference and mem leak
blk-mq: do not reset plug->rq_count before the list is sorted
paride/pf: Fix potential NULL pointer dereference
io_uring: fix double free in case of fileset regitration failure
blk-mq: add trace block plug and unplug for multiple queues
block: use blk_free_flush_queue() to free hctx->fq in blk_mq_init_hctx
block/bfq: fix ifdef for CONFIG_BFQ_GROUP_IOSCHED=y
When HOTPLUG_CPU is disabled, some fields in the smp operations
are not available or needed:
arch/arm/mach-milbeaut/platsmp.c:90:3: error: field designator 'cpu_die' does not refer to any field in type
'struct smp_operations'
.cpu_die = m10v_cpu_die,
^
arch/arm/mach-milbeaut/platsmp.c:91:3: error: field designator 'cpu_kill' does not refer to any field in type
'struct smp_operations'
.cpu_kill = m10v_cpu_kill,
^
Hide them in an #ifdef like the other platforms do.
Fixes: 9fb29c734f ("ARM: milbeaut: Add basic support for Milbeaut m10v SoC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
clang warns about statically defined DMA masks from the DMA_BIT_MASK
macro with length 64:
arch/arm/mach-iop13xx/setup.c:303:35: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64);
^~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
^ ~~~
The ones in iop shouldn't really be 64 bit masks, so changing them
to what the driver can support avoids the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
clang warns about statically defined DMA masks from the DMA_BIT_MASK
macro with length 64:
arch/arm/plat-orion/common.c:625:29: error: shift count >= width of type [-Werror,-Wshift-count-overflow]
.coherent_dma_mask = DMA_BIT_MASK(64),
^~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK'
#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1))
The ones in orion shouldn't really be 64 bit masks, so changing them
to what the driver can support avoids the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
This reverts commit fa9463564e.
Per Linus Walleij:
Dear ARM SoC maintainers,
can you please revert this patch. It was the wrong solution to the
wrong problem, and I must have acted in stress. Andrey fixed the
real bug in a proper way in these commits:
commit e5545c94e4
"gpio: of: Check propname before applying "cs-gpios" quirks"
commit 7ce40277bf
"gpio: of: Check for "spi-cs-high" in child instead of parent node"
Signed-off-by: Olof Johansson <olof@lixom.net>
Few small fixes for omap variants:
- Fix ams-delta gpio IDs
- Add missing of_node_put for omapdss platform init code
- Fix unconfigured audio regulators for two am335x boards
- Fix use of wrong offset for am335x d_can clocks
-----BEGIN PGP SIGNATURE-----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=P4SD
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.1/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.1-rc cycle
Few small fixes for omap variants:
- Fix ams-delta gpio IDs
- Add missing of_node_put for omapdss platform init code
- Fix unconfigured audio regulators for two am335x boards
- Fix use of wrong offset for am335x d_can clocks
* tag 'omap-for-v5.1/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix dcan clkctrl clock for am3
ARM: dts: am335x-evmsk: Correct the regulators for the audio codec
ARM: dts: am335x-evm: Correct the regulators for the audio codec
ARM: OMAP2+: add missing of_node_put after of_device_is_available
ARM: OMAP1: ams-delta: Fix broken GPIO ID allocation
Signed-off-by: Olof Johansson <olof@lixom.net>
- fix a typo in sama5d2 pinmuxing which concerns the ISC data 0 signal
- fix a kobject reference leak
-----BEGIN PGP SIGNATURE-----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=kRr0
-----END PGP SIGNATURE-----
Merge tag 'at91-5.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes for 5.1
- fix a typo in sama5d2 pinmuxing which concerns the ISC data 0 signal
- fix a kobject reference leak
* tag 'at91-5.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
arm/mach-at91/pm : fix possible object reference leak
ARM: dts: at91: Fix typo in ISC_D0 on PC9
Signed-off-by: Olof Johansson <olof@lixom.net>
sd-card related fixes on both rk3328 ans rk3288-tinker and a
regulator fix on rock64 and making ddc actually work on the
Rock PI 4 due to missing the ddc bus.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlyhSTcQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgZJDB/9YqOy1Xzf7URHsOHMecGkt1dMSQom+Ln6Y
pc4Fxu93W3jsELPcVi01iRTYVg8W90RKjVLer+mM3LuFJpAh2hIxIcMZu7zqEZWg
6HNJA6GbcW0ZqUdBdV0GID0VIdHdkopq6b4qtbhuLUCaSzRocKgxStPPcEmeV4Yt
HDZOzkuks+BgUfsCfYmEiyoEIVUFLMFsD/MLo1az1mGNQ0bpi4DYN8XCY8lKDtmT
PHfLQuyWdmRAojD+xymvFShFGoyLAbHMK0v6ckaJ0tSy+3VQ8QgzCxhUPF+fR8vg
8kfgPGkjV5t7IS/DrcFYEp0vH2RRTMhOhx5PkFocypHK0J0UBzSs
=KU2f
-----END PGP SIGNATURE-----
Merge tag 'v5.1-rockchip-dtfixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Fixes for dtc warnings, fixes for ethernet transfers on rk3328,
sd-card related fixes on both rk3328 ans rk3288-tinker and a
regulator fix on rock64 and making ddc actually work on the
Rock PI 4 due to missing the ddc bus.
* tag 'v5.1-rockchip-dtfixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Remove #address/#size-cells from rk3288-veyron gpio-keys
ARM: dts: rockchip: Remove #address/#size-cells from rk3288 mipi_dsi
ARM: dts: rockchip: Fix gpu opp node names for rk3288
arm64: dts: rockchip: fix rk3328 sdmmc0 write errors
arm64: dts: rockchip: fix rk3328 rgmii high tx error rate
ARM: dts: rockchip: Fix SD card detection on rk3288-tinker
arm64: dts: rockchip: Fix vcc_host1_5v GPIO polarity on rk3328-rock64
ARM: dts: rockchip: fix rk3288 cpu opp node reference
arm64: dts: rockchip: add DDC bus on Rock Pi 4
arm64: dts: rockchip: fix rk3328-roc-cc gmac2io tx/rx_delay
Signed-off-by: Olof Johansson <olof@lixom.net>
This tag adds missing USB PHY reset lines to the Meson G12A reset
controller header and fixes the Meson Audio ARB driver to prevent
module unloading while it is in use.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXJoKoRcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwIrGAP9cKFE8ans4N54ymyvB2p5TrPSK
2oSVofr49W9bN1sHiwD+MvRJpJDEHtzAxfnNOvAd02wlU9GR/iDuUfGFI2gc7AA=
=RDL9
-----END PGP SIGNATURE-----
Merge tag 'reset-fixes-for-v5.1' of git://git.pengutronix.de/pza/linux into arm/fixes
Reset controller fixes for v5.1
This tag adds missing USB PHY reset lines to the Meson G12A reset
controller header and fixes the Meson Audio ARB driver to prevent
module unloading while it is in use.
* tag 'reset-fixes-for-v5.1' of git://git.pengutronix.de/pza/linux:
reset: meson-audio-arb: Fix missing .owner setting of reset_controller_dev
dt-bindings: reset: meson-g12a: Add missing USB2 PHY resets
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit fd73403a48 ("dt-bindings: arm: Add SMP enable-method for
Milbeaut") added support for a new cpu enable-method, but did so using
tabulations to ident. This is however invalid in the syntax, and resulted
in a failure when trying to use that schemas for validation.
Use spaces instead of tabs to indent to fix this.
Fixes: fd73403a48 ("dt-bindings: arm: Add SMP enable-method for Milbeaut")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
