The line offset that is used as an index into the descs array is provided
by userspace and might go beyond the bounds of the array. If that happens
undefined behavior will occur.
Make sure that the offset is within the bounds of the desc array and reject
any requests that specify a value outside of it.
Cc: stable@vger.kernel.org
Fixes: 61f922db72 ("gpio: userspace ABI for reading GPIO line events")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The GPIOHANDLE_GET_LINE_VALUES_IOCTL handler allocates a gpiohandle_data
struct on the stack and then passes it to copy_to_user(). But only the
first element of the values array in the struct is set, which leaves the
struct partially initialized.
This exposes the previous, potentially sensitive, stack content to the
issuing userspace application. To avoid this make sure that the struct is
fully initialized.
Cc: stable@vger.kernel.org
Fixes: 61f922db72 ("gpio: userspace ABI for reading GPIO line events")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The line offset that is used as an index into the descs array is provided
by userspace and might go beyond the bounds of the array. If that happens
undefined behavior will occur.
Make sure that the offset is within the bounds of the desc array and reject
any requests that specify a value outside of it.
Cc: stable@vger.kernel.org
Fixes: d7c51b47ac ("gpio: userspace ABI for reading/writing GPIO lines")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The GPIO_GET_CHIPINFO_IOCTL handler allocates a gpiochip_info struct on the
stack and then passes it to copy_to_user(). But depending on the length of
the GPIO chip name and label the struct is only partially initialized.
This exposes the previous, potentially sensitive, stack content to the
issuing userspace application. To avoid this make sure that the struct is
fully initialized.
Cc: stable@vger.kernel.org
Fixes: 521a2ad6f8 ("gpio: add userspace ABI for GPIO line information")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The current line offset validation is off by one. Depending on the data
stored behind the descs array this can either cause undefined behavior or
disclose arbitrary, potentially sensitive, memory to the issuing userspace
application.
Make sure that offset is within the bounds of the desc array.
Cc: stable@vger.kernel.org
Fixes: 521a2ad6f8 ("gpio: add userspace ABI for GPIO line information")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The TPS65217 driver grew interrupt support which uses
irq_set_parent(). While it's not yet clear why this is used in the first
place, building the driver as a module fails with:
ERROR: ".irq_set_parent" [drivers/mfd/tps65217.ko] undefined!
The correctness of the driver change is still investigated, but for now
it's less trouble to export irq_set_parent() than dealing with the build
wreckage.
[ tglx: Rewrote changelog and made the export GPL ]
Fixes: 6556bdacf6 ("mfd: tps65217: Add support for IRQs")
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Marcin Niestroj <m.niestroj@grinn-global.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Lee Jones <lee.jones@linaro.org>
Link: http://lkml.kernel.org/r/1475775403-27207-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The libfc stack assigns exchange IDs based on the CPU the request
was received on, so we need to send the responses via the same CPU.
Otherwise the send logic gets confuses and responses will be delayed,
causing exchange timeouts on the initiator side.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Cc: stable@vger.kernel.org # 4.5+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Update the debug statements to match those from libfc.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Not every failure is due to out-of-memory; the ACLs might not be
set, too. So return a detailed error code in ft_sess_create()
instead of just a NULL pointer.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
When allocating a new command we should add the pointer to the
debug statements; that allows us to match this with other debug
statements for handling data.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
target_sess_cmd_list_waiting() might hit on a condition where
the kref for the command is already 0, but the destructor has
not been called yet (or is stuck in waiting for a spin lock).
Rather than leaving the command on the list we should explicitly
remove it to avoid race issues later on.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2 more patches to stabilize the new MMUv2 support.
* 'drm-etnaviv-fixes' of git://git.pengutronix.de/lst/linux:
drm/etnaviv: block 64K of address space behind each cmdstream
drm/etnaviv: ensure write caches are flushed at end of user cmdstream
vmwgfx cleanups and fixes.
* 'drm-vmwgfx-fixes' of ssh://people.freedesktop.org/~syeh/repos_linux:
drm/vmwgfx: Adjust checks for null pointers in 13 functions
drm/vmwgfx: Use memdup_user() rather than duplicating its implementation
drm/vmwgfx: Use kmalloc_array() in vmw_surface_define_ioctl()
drm/vmwgfx: Avoid validating views on view destruction
drm/vmwgfx: Limit the user-space command buffer size
drm/vmwgfx: Remove a leftover debug printout
drm/vmwgfx: Allow resource relocations on byte boundaries
drm/vmwgfx: Enable SVGA_3D_CMD_DX_TRANSFER_FROM_BUFFER command
drm/vmwgfx: Remove call to reservation_object_test_signaled_rcu before wait
drm/vmwgfx: Replace numeric parameter like 0444 with macro
One small fix for Armada, where the clock prepare/enable counts were
going awry.
* 'drm-armada-fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
drm/armada: fix clock counts
This are some fixes which I hoped to still get into v4.9. I used to
test them here since about 2 weeks and Meng came around to test it
on the second platform making use of this IP too, so they are well
tested now.
* 'fixes-for-v4.9-rc2' of http://git.agner.ch/git/linux-drm-fsl-dcu:
drm/fsl-dcu: enable pixel clock when enabling CRTC
drm/fsl-dcu: do not transfer registers in mode_set_nofb
drm/fsl-dcu: do not transfer registers on plane init
drm/fsl-dcu: enable TCON bypass mode by default
The bcm_sf2 driver uses kexec_in_progress to know whether it can power
down an integrated PHY during shutdown, and can be built as a module.
Other modules may be using this in the future, so export it.
Fixes: 2399d6143f ("net: dsa: bcm_sf2: Prevent GPHY shutdown for kexec'd kernels")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If 'clk_hw_register()' fails, it is likely that we expect to return an
error instead of a valid pointer (which would mean success).
Fix commit f5644f10dc ("clk: at91: Migrate to clk_hw based registration
and OF APIs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
It turns out we need to ping the watchdog hardware on resume when we
re-program it. Otherwise this causes inadvertent reset to trigger
right after the resume is complete.
Fixes: 058dfc7670 (ACPI / watchdog: Add support for WDAT hardware watchdog)
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This fixes pointer arithmetics mess-up in the cpufreq core introduced
by one of recent commits and leading to all kinds of breakage from
kernel crashes to incorrect governor decisions (Sergey Senozhatsky).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=zILz
-----END PGP SIGNATURE-----
Merge tag 'pm-4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"This fixes the pointer arithmetics mess-up in the cpufreq core
introduced by one of recent commits and leading to all kinds of
breakage from kernel crashes to incorrect governor decisions (Sergey
Senozhatsky)"
* tag 'pm-4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: fix overflow in cpufreq_table_find_index_dl()
struct clocksource is also used by the clk notifier callback, to
unregister and re-register the clocksource with a different clock rate.
clocksource_mmio_init does not pass back a pointer to the struct used,
and the clk notifier callback assumes that the struct clocksource in
struct sun5i_timer_clksrc is valid. This results in a kernel NULL
pointer dereference when the hstimer clock is changed:
Unable to handle kernel NULL pointer dereference at virtual address 00000004
[<c03a4678>] (clocksource_unbind) from [<c03a46d4>] (clocksource_unregister+0x2c/0x44)
[<c03a46d4>] (clocksource_unregister) from [<c0a6f350>] (sun5i_rate_cb_clksrc+0x34/0x3c)
[<c0a6f350>] (sun5i_rate_cb_clksrc) from [<c035ea50>] (notifier_call_chain+0x44/0x84)
[<c035ea50>] (notifier_call_chain) from [<c035edc0>] (__srcu_notifier_call_chain+0x44/0x60)
[<c035edc0>] (__srcu_notifier_call_chain) from [<c035edf4>] (srcu_notifier_call_chain+0x18/0x20)
[<c035edf4>] (srcu_notifier_call_chain) from [<c0670174>] (__clk_notify+0x70/0x7c)
[<c0670174>] (__clk_notify) from [<c06702c0>] (clk_propagate_rate_change+0xa4/0xc4)
[<c06702c0>] (clk_propagate_rate_change) from [<c0670288>] (clk_propagate_rate_change+0x6c/0xc4)
Revert the commit for now. clocksource_mmio_init can be made to pass back
a pointer, but the code churn and usage of an inner struct might not be
worth it.
Fixes: 157dfadef8 ("clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init")
Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Cc: linux-sunxi@googlegroups.com
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20161018054918.26855-1-wens@csie.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In commit 4ee3bd4a8c ("ipv4: disable BH when changing ip local port
range") Cong added BH protection in set_local_port_range() but missed
that same fix was needed in set_ping_group_range()
Fixes: b8f1a55639 ("udp: Add function to make source port for UDP tunnels")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Eric Salo <salo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Baozeng Ding reported KASAN traces showing uses after free in
udp_lib_get_port() and other related UDP functions.
A CONFIG_DEBUG_PAGEALLOC=y kernel would eventually crash.
I could write a reproducer with two threads doing :
static int sock_fd;
static void *thr1(void *arg)
{
for (;;) {
connect(sock_fd, (const struct sockaddr *)arg,
sizeof(struct sockaddr_in));
}
}
static void *thr2(void *arg)
{
struct sockaddr_in unspec;
for (;;) {
memset(&unspec, 0, sizeof(unspec));
connect(sock_fd, (const struct sockaddr *)&unspec,
sizeof(unspec));
}
}
Problem is that udp_disconnect() could run without holding socket lock,
and this was causing list corruptions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Baozeng Ding <sploving1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For a kernel that is being kexec'd we re-enable the integrated GPHY in
order for the subsequent MDIO bus scan to succeed and properly bind to
the bcm7xxx PHY driver. If we did not do that, the GPHY would be shut
down by the time the MDIO driver is probing the bus, and it would fail
to read the correct PHY OUI and therefore bind to an appropriate PHY
driver. Later on, this would cause DSA not to be able to successfully
attach to the PHY, and the interface would not be created at all.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 636c262808 ("net: skbuff: Remove errornous length
validation in skb_vlan_pop()") mentioned test case stopped working,
throwing a -12 (ENOMEM) return code. The issue however is not due to
636c262808, but rather due to a buggy test case that got uncovered
from the change in behaviour in 636c262808.
The data_size of that test case for the skb was set to 1. In the
bpf_fill_ld_abs_vlan_push_pop() handler bpf insns are generated that
loop with: reading skb data, pushing 68 tags, reading skb data,
popping 68 tags, reading skb data, etc, in order to force a skb
expansion and thus trigger that JITs recache skb->data. Problem is
that initial data_size is too small.
While before 636c262808, the test silently bailed out due to the
skb->len < VLAN_ETH_HLEN check with returning 0, and now throwing an
error from failing skb_ensure_writable(). Set at least minimum of
ETH_HLEN as an initial length so that on first push of data, equivalent
pop will succeed.
Fixes: 4d9c5c53ac ("test_bpf: add bpf_skb_vlan_push/pop() tests")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, GRO can do unlimited recursion through the gro_receive
handlers. This was fixed for tunneling protocols by limiting tunnel GRO
to one level with encap_mark, but both VLAN and TEB still have this
problem. Thus, the kernel is vulnerable to a stack overflow, if we
receive a packet composed entirely of VLAN headers.
This patch adds a recursion counter to the GRO layer to prevent stack
overflow. When a gro_receive function hits the recursion limit, GRO is
aborted for this skb and it is processed normally. This recursion
counter is put in the GRO CB, but could be turned into a percpu counter
if we run out of space in the CB.
Thanks to Vladimír Beneš <vbenes@redhat.com> for the initial bug report.
Fixes: CVE-2016-7039
Fixes: 9b174d88c2 ("net: Add Transparent Ethernet Bridging GRO support.")
Fixes: 66e5133f19 ("vlan: Add GRO support for non hardware accelerated vlan")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A malicious user space can provide an invalid mode for runtime
instrumentation via the interfaces that are normally used on
the target host during migration. This would trigger a WARN_ON
via validity intercept. Let's detect this special case.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=+ie5
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux
KVM: s390: Fix for user-triggerable WARN_ON
A malicious user space can provide an invalid mode for runtime
instrumentation via the interfaces that are normally used on
the target host during migration. This would trigger a WARN_ON
via validity intercept. Let's detect this special case.
The check for an underflow of tmp_prefered_lft is always false
because tmp_prefered_lft is unsigned. The intention of the check
was to guard against racing with an update of the
temp_prefered_lft sysctl, potentially resulting in an underflow.
As suggested by David Miller, the best way to prevent the race is
by reading the sysctl variable using READ_ONCE.
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Fixes: 76506a986d ("IPv6: fix DESYNC_FACTOR")
Signed-off-by: David S. Miller <davem@davemloft.net>
At the hardware level, the J-Core PIT is integrated with the interrupt
controller, but it is represented as its own device and has an
independent programming interface. It provides a 12-bit countdown
timer, which is not presently used, and a periodic timer. The interval
length for the latter is programmable via a 32-bit throttle register
whose units are determined by a bus-period register. The periodic
timer is used to implement both periodic and oneshot clock event
modes; in oneshot mode the interrupt handler simply disables the timer
as soon as it fires.
Despite its device tree node representing an interrupt for the PIT,
the actual irq generated is programmable, not hard-wired. The driver
is responsible for programming the PIT to generate the hardware irq
number that the DT assigns to it.
On SMP configurations, J-Core provides cpu-local instances of the PIT;
no broadcast timer is needed. This driver supports the creation of the
necessary per-cpu clock_event_device instances.
A nanosecond-resolution clocksource is provided using the J-Core "RTC"
registers, which give a 64-bit seconds count and 32-bit nanoseconds
that wrap every second. The driver converts these to a full-range
32-bit nanoseconds count.
Signed-off-by: Rich Felker <dalias@libc.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Link: http://lkml.kernel.org/r/b591ff12cc5ebf63d1edc98da26046f95a233814.1476393790.git.dalias@libc.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Usually a validity intercept is a programming error of the host
because of invalid entries in the state description.
We can get a validity intercept if the mode of the runtime
instrumentation control block is wrong. As the host does not know
which modes are valid, this can be used by userspace to trigger
a WARN.
Instead of printing a WARN let's return an error to userspace as
this can only happen if userspace provides a malformed initial
value (e.g. on migration). The kernel should never warn on bogus
input. Instead let's log it into the s390 debug feature.
While at it, let's return -EINVAL for all validity intercepts as
this will trigger an error in QEMU like
error: kvm run failed Invalid argument
PSW=mask 0404c00180000000 addr 000000000063c226 cc 00
R00=000000000000004f R01=0000000000000004 R02=0000000000760005 R03=000000007fe0a000
R04=000000000064ba2a R05=000000049db73dd0 R06=000000000082c4b0 R07=0000000000000041
R08=0000000000000002 R09=000003e0804042a8 R10=0000000496152c42 R11=000000007fe0afb0
[...]
This will avoid an endless loop of validity intercepts.
Cc: stable@vger.kernel.org # v4.5+
Fixes: c6e5f16637 ("KVM: s390: implement the RI support of guest")
Acked-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
nf_queue handling is broken since e3b37f11e6 ("netfilter: replace
list_head with single linked list") for two reasons:
1) If the bypass flag is set on, there are no userspace listeners and
we still have more hook entries to iterate over, then jump to the
next hook. Otherwise accept the packet. On nf_reinject() path, the
okfn() needs to be invoked.
2) We should not re-enter the same hook on packet reinjection. If the
packet is accepted, we have to skip the current hook from where the
packet was enqueued, otherwise the packets gets enqueued over and
over again.
This restores the previous list_for_each_entry_continue() behaviour
happening from nf_iterate() that was dealing with these two cases.
This patch introduces a new nf_queue() wrapper function so this fix
becomes simpler.
Fixes: e3b37f11e6 ("netfilter: replace list_head with single linked list")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When the maximum evictions number is reached, do not wait 5 seconds before
the next run.
CC: Florian Westphal <fw@strlen.de>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
commit 17a51f12 ("ahci: only try to use multi-MSI mode if there is more
than 1 port") lead to a case where nvec isn't initialized before it's
used. Fix this by moving the check into the n_ports conditional.
Reported-and-reviewed-by Colin Ian King <colin.king@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
- Fix ACPI boot due to recent broken NUMA changes
- Fix remote enabling of CPU features requiring PSTATE bit manipulation
- Add address range check when emulating user cache maintenance
- Fix LL/SC loops that allow compiler to introduce memory accesses
- Fix recently added write_sysreg_s macro
- Ensure MDCR_EL2 is initialised on qemu targets without a PMU
- Avoid kaslr breakage due to MODVERSIONs and DYNAMIC_FTRACE
- Correctly drive recent ld when building relocatable Image
- Remove junk IS_ERR check from xgene PMU driver added during merge window
- pr_cont fixes after core changes in the merge window
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJYCNgDAAoJELescNyEwWM0BV8IAKZLVlfKk2YTo3T/tx/2FGIW
5VKjSY13VLLC5cKQLB7Yvm7G1kzvLiN4Zb5fqvL0CK1ut8scPVbR1AAhSDngB4vU
UNzUqwp1R0Tl+GhLT+IfOElWjEcB9kwic3CZV5v4FxvZg4HvwstL3zLvMkjTaDYK
GjaS9iQ2zQsgsYHtluzia7q1k2fXfqdLOd5V0XF05CykJKO3j7zpqTv8PKF7PUFU
utsjRdyyGmBYaamG/cO5phDbAD5VMvdWcfDeJ25JdSwHaoxjZ8tpM721R4b5GRN7
5rPn52v5Hycp++FmhuO45laVQc60LYMz17mQwSTnIX2pGuFRqjRWJztJpyQqzWo=
=MXN1
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Most of these are CC'd for stable, but there are a few fixing issues
introduced during the recent merge window too.
There's also a fix for the xgene PMU driver, but it seemed daft to
send as a separate pull request, so I've included it here with the
rest of the fixes.
- Fix ACPI boot due to recent broken NUMA changes
- Fix remote enabling of CPU features requiring PSTATE bit manipulation
- Add address range check when emulating user cache maintenance
- Fix LL/SC loops that allow compiler to introduce memory accesses
- Fix recently added write_sysreg_s macro
- Ensure MDCR_EL2 is initialised on qemu targets without a PMU
- Avoid kaslr breakage due to MODVERSIONs and DYNAMIC_FTRACE
- Correctly drive recent ld when building relocatable Image
- Remove junk IS_ERR check from xgene PMU driver added during merge window
- pr_cont fixes after core changes in the merge window"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: remove pr_cont abuse from mem_init
arm64: fix show_regs fallout from KERN_CONT changes
arm64: kernel: force ET_DYN ELF type for CONFIG_RELOCATABLE=y
arm64: suspend: Reconfigure PSTATE after resume from idle
arm64: mm: Set PSTATE.PAN from the cpu_enable_pan() call
arm64: cpufeature: Schedule enable() calls instead of calling them via IPI
arm64: Cortex-A53 errata workaround: check for kernel addresses
arm64: percpu: rewrite ll/sc loops in assembly
arm64: swp emulation: bound LL/SC retries before rescheduling
arm64: sysreg: Fix use of XZR in write_sysreg_s
arm64: kaslr: keep modules close to the kernel when DYNAMIC_FTRACE=y
arm64: kernel: Init MDCR_EL2 even in the absence of a PMU
perf: xgene: Remove bogus IS_ERR() check
arm64: kernel: numa: fix ACPI boot cpu numa node mapping
arm64: kaslr: fix breakage with CONFIG_MODVERSIONS=y
Nikolay's error path patch is tagged for stable, everything else but
readdir vs frags race was introduced in 4.9-rc1.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJYCPFwAAoJEEp/3jgCEfOLQxkH/3t7m/NaC0S+1eISHQWne0rs
GtI4wx6Yh5KUV0SKgzYTYs0AEusW459XvUzwLwe/Tp9Qdp/KehviGJdQY8WBP6Es
J5u7WLU+Ja1GwB586YUzhG7L3PAi8DXxbkTB+MYB4circhZ0w8ecuJUL4o++5VuH
yAfoKn6tFyCTpvhFGd9dBPn3tVl90/vpwiH/hHp04PWHq6dNvLyJuIbvUD4JaV3O
NYQqq3fFG76jqwyu2dE0DN4IPNb3tUjJ1oY86Uvkq7DP4ZiI61JNx45XTW1XIplx
lWi2f2MurwznAJZl9kaU0TiTdS7liizkRdb2cu56nMRmzVSDz+va5X3CdDSpQtg=
=JwMW
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.9-rc2' of git://github.com/ceph/ceph-client
Pull Ceph fixes from Ilya Dryomov:
"An rbd exclusive-lock edge case fix and several filesystem fixups.
Nikolay's error path patch is tagged for stable, everything else but
readdir vs frags race was introduced in this merge window"
* tag 'ceph-for-4.9-rc2' of git://github.com/ceph/ceph-client:
ceph: fix non static symbol warning
ceph: fix uninitialized dentry pointer in ceph_real_mount()
ceph: fix readdir vs fragmentation race
ceph: fix error handling in ceph_read_iter
rbd: don't retry watch reregistration if header object is gone
rbd: don't wait for the lock forever if blacklisted
- Update MAINTAINERS as the mmc tree moved to kernel.org
- A few fixes for HS400es mode
- A few other minor fixes
MMC host:
- sdhci: Fix an issue when dealing with stop commands
- sdhci-pci: Fix a bus power failure issue
- sdhci-esdhc-imx: Correct two register accesses
- sdhci-of-arasan: Fix the 1.8V I/O signal switch behaviour
- rtsx_usb_sdmmc: Fix runtime PM issues
Other: (Because of no maintainer)
- memstick: rtsx_usb_ms: Fix runtime PM issues
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Oy6R
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Here are some mmc fixes intended for v4.9 rc2.
This time I have also included a few changes for a memstick driver
which has a corresponding mmc driver. They use the same USB device as
parent, hence both needs to play nice with runtime PM, which they
didn't.
MMC core:
- Update MAINTAINERS as the mmc tree moved to kernel.org
- A few fixes for HS400es mode
- A few other minor fixes
MMC host:
- sdhci: Fix an issue when dealing with stop commands
- sdhci-pci: Fix a bus power failure issue
- sdhci-esdhc-imx: Correct two register accesses
- sdhci-of-arasan: Fix the 1.8V I/O signal switch behaviour
- rtsx_usb_sdmmc: Fix runtime PM issues
Other: (Because of no maintainer)
- memstick: rtsx_usb_ms: Fix runtime PM issues"
* tag 'mmc-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
MAINTAINERS: mmc: Move the mmc tree to kernel.org
memstick: rtsx_usb_ms: Manage runtime PM when accessing the device
memstick: rtsx_usb_ms: Runtime resume the device when polling for cards
mmc: rtsx_usb_sdmmc: Handle runtime PM while changing the led
mmc: rtsx_usb_sdmmc: Avoid keeping the device runtime resumed when unused
mmc: sdhci: cast unsigned int to unsigned long long to avoid unexpeted error
mmc: sdhci-esdhc-imx: Correct two register accesses
mmc: sdhci-pci: Fix bus power failing to enable for some Intel controllers
mmc: sdhci-pci: Let devices define their own sdhci_ops
mmc: sdhci: Rename sdhci_set_power() to sdhci_set_power_noreg()
mmc: sdhci: Fix SDHCI_QUIRK2_STOP_WITH_TC
mmc: core: Annotate cmd_hdr as __le32
mmc: sdhci-of-arasan: add sdhci_arasan_voltage_switch for arasan, 5.1
mmc: core: changes frequency to hs_max_dtr when selecting hs400es
mmc: core: switch to 1V8 or 1V2 for hs400es mode
mmc: block: add missing header dependencies
mmc: sdhci-of-arasan: Fix non static symbol warning
USB2 host inititated resume, and system suspend bus resume
need to use the same USB_RESUME_TIMEOUT as elsewhere.
This resolves a device disconnect issue at system resume seen
on Intel Braswell and Apollolake, but is in no way limited to
those platforms.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a device is unplugged and replugged during Sx system suspend
some Intel xHC hosts will overwrite the CAS (Cold attach status) flag
and no device connection is noticed in resume.
A device in this state can be identified in resume if its link state
is in polling or compliance mode, and the current connect status is 0.
A device in this state needs to be warm reset.
Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8
Observed on Cherryview and Apollolake as they go into compliance mode
if LFPS times out during polling, and re-plugged devices are not
discovered at resume.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xHC in Wildcatpoint-LP PCH is similar to LynxPoint-LP and need the
same quirks to prevent machines from spurious restart while
shutting them down.
Reported-by: Hasan Mahmood <hasan.mahm@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull misc filesystem fixes from Jan Kara:
"A fix for an isofs change apparently breaking mount(8) in some cases
and one ext2 warning fix"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: avoid bogus -Wmaybe-uninitialized warning
isofs: Do not return EACCES for unknown filesystems
It makes sense to display the descriptors even if
DES0 is zero. This helps for example in case of it
is needed to dump rx write-back descriptors to get
timestamp status.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gavin Shan says:
====================
net/ncsi: More bug fixes
This series fixes 2 issues that were found during NCSI's availability
testing on BCM5718 and improves HNCDSC AEN handler:
* PATCH[1] refactors the code so that minimal code change is put
to PATCH[2].
* PATCH[2] fixes the NCSI channel's stale link state before doing
failover.
* PATCH[3] chooses the hot channel, which was ever chosen as active
channel, when the available channels are all in link-down state.
* PATCH[4] improves Host Network Controller Driver Status Change
(HNCDSC) AEN handler
Changelog
=========
v2:
* Merged PATCH[v1 1/2] to PATCH[v2 1].
* Avoid if/else statements in ncsi_suspend_channel() as Joel suggested.
* Added comments to explain why we need retrieve last link states in
ncsi_suspend_channel().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This improves AEN handler for Host Network Controller Driver Status
Change (HNCDSC):
* The channel's lock should be hold when accessing its state.
* Do failover when host driver isn't ready.
* Configure channel when host driver becomes ready.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The issue was found on BCM5718 which has two NCSI channels in one
package: C0 and C1. C0 is in link-up state while C1 is in link-down
state. C0 is chosen as active channel until unplugging and plugging
C0's cable: On unplugging C0's cable, LSC (Link State Change) AEN
packet received on C0 to report link-down event. After that, C1 is
chosen as active channel. LSC AEN for link-up event is lost on C0
when plugging C0's cable back. We lose the network even C0 is usable.
This resolves the issue by recording the (hot) channel that was ever
chosen as active one. The hot channel is chosen to be active one
if none of available channels in link-up state. With this, C0 is still
the active one after unplugging C0's cable. LSC AEN packet received
on C0 when plugging its cable back.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The issue was found on BCM5718 which has two NCSI channels in one
package: C0 and C1. Both of them are connected to different LANs,
means they are in link-up state and C0 is chosen as the active one
until resetting BCM5718 happens as below.
Resetting BCM5718 results in LSC (Link State Change) AEN packet
received on C0, meaning LSC AEN is missed on C1. When LSC AEN packet
received on C0 to report link-down, it fails over to C1 because C1
is in link-up state as software can see. However, C1 is in link-down
state in hardware. It means the link state is out of synchronization
between hardware and software, resulting in inappropriate channel (C1)
selected as active one.
This resolves the issue by sending separate GLS (Get Link Status)
commands to all channels in the package before trying to do failover.
The last link states of all channels in the package are retrieved.
With it, C0 (not C1) is selected as active one as expected.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are several if/else statements in the state machine implemented
by switch/case in ncsi_suspend_channel() to avoid duplicated code. It
makes the code a bit hard to be understood.
This drops if/else statements in ncsi_suspend_channel() to improve the
code readability as Joel Stanley suggested. Also, it becomes easy to
add more states in the state machine without affecting current code.
No logical changes introduced by this.
Suggested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stats_update callback is called by NIC drivers doing hardware
offloading of the mirred action. Lastuse is passed as argument
to specify when the stats was actually last updated and is not
always the current time.
Fixes: 9798e6fe4f ('net: act_mirred: allow statistic updates from offloaded actions')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SwitchX2 firmware does not implement reset done yet. Moreover, when
busy-polled for ready magic, that slows down firmware and reset takes
longer than the defined timeout, causing initialization to fail.
So restore the previous behaviour and just sleep in this case.
Fixes: 233fa44bd6 ("mlxsw: pci: Implement reset done check")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
