The cardlist section is important for some boards, because they
may require extra modprobe parameters.
Improve the docs to mention that.
Thanks-to: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for providing me some PCI IDs
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Several of the existing documents under the media admin-guide
contain build procedures.
Add an specific chapter describing it. This document was
partially inspired on the modifications I made to the bttv.rst
file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The media's admin guide is currently just a group of
not-connected docs.
Add an introduction chapter for it to start making sense
to a random reader.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It is interesting to have a card list also for cx231xx
driver, as it currently supports 27 different boards.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Improve the documentation by providing examples on how to test camera
capture on imx6q-sabresd via v4l2-ctl and Gstreamer.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam<slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In order to improve the documentation, provide the OV5640 MIPI module
part number that is used on the imx6q-sabresd board.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The current example for imx6q-sabresd is for a direct conversion pipeline.
Provide an extra example using unprocessed video capture for completeness.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The current instructions for imx6q-sabresd do not lead to functional
capture on OV5640 MIPI CSI-2.
The reason for this, as explained by Steve Longerbeam, is that OV5640 by
default transmits on virtual channel 0, not channel 1 as is given in the
instructions.
Adapt the instructions to use virtual channel 0 so that a working
camera setup can be achieved on imx6q-sabresd.
Also, since we are using an IC direct conversion pipeline, improve
the example by demonstrating colorspace and scaling.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Steve Longerbeam<slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl6cxDAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGb2YH/3V3yrWOgbZkEWvO
IwW5nSjYk+xTBs7Tf5+nycWHpr+e92tX4m/+DZ6qn1sQpjdKEA7EZ/E0mpm0fm5w
Po+dzy4PP40CLi/Z0mXl3U3FWmp5l50Q4tEs5fzI6rQPKjX+G5qO8+J7Yu1iNduJ
KRbNeKCnUGHf2mRYiOJRNurVm4Yv370AIyvulxX5FkZHN7hTq/Js76sRV1BSnG7k
o1Vs4vvFSSdFgVxyuflpV0Uv9bDTxppqiwQ4ktntB8TKmVtXLT25wcO4V5LwRjQt
6o064j343Q+OQ4t/LZVKYUB0Fmw8Ks1YH00OOdH6G41wY6LogaxYIXM1YvUZ4NwQ
HjNsASY=
=kvEN
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rc2' into patchwork
Linux 5.7-rc2
* tag 'v5.7-rc2': (331 commits)
Linux 5.7-rc2
mm: Fix MREMAP_DONTUNMAP accounting on VMA merge
xattr.h: Replace zero-length array with flexible-array member
uapi: linux: fiemap.h: Replace zero-length array with flexible-array member
uapi: linux: dlm_device.h: Replace zero-length array with flexible-array member
tpm_eventlog.h: Replace zero-length array with flexible-array member
ti_wilink_st.h: Replace zero-length array with flexible-array member
swap.h: Replace zero-length array with flexible-array member
skbuff.h: Replace zero-length array with flexible-array member
sched: topology.h: Replace zero-length array with flexible-array member
rslib.h: Replace zero-length array with flexible-array member
rio.h: Replace zero-length array with flexible-array member
posix_acl.h: Replace zero-length array with flexible-array member
platform_data: wilco-ec.h: Replace zero-length array with flexible-array member
memcontrol.h: Replace zero-length array with flexible-array member
list_lru.h: Replace zero-length array with flexible-array member
lib: cpu_rmap: Replace zero-length array with flexible-array member
irq.h: Replace zero-length array with flexible-array member
ihex.h: Replace zero-length array with flexible-array member
igmp.h: Replace zero-length array with flexible-array member
...
Documentation for the kernel.modprobe sysctl was added both by
commit 0317c5371e ("docs: merge debugging-modules.txt into
sysctl/kernel.rst") and by commit 6e71582506 ("docs: admin-guide:
document the kernel.modprobe sysctl"), resulting in the same sysctl
being documented in two places. Merge these into one place.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200414172430.230293-1-ebiggers@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
In order to make easier for people to navigate between the
three media guides, add cross-references between them
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The copyright info is not the most valuable information
there. Move them to the end.
While here, change the copyright to cover up to this
year (2020).
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This file is very old, and doesn't match the current udev
behavior.
I wanted to preserve it, because we'll need some udev
description some day about how to keep names unique,
but there's nothing here to help with that...
So, be it: let's just discard this document, as it doesn't
provide anything useful anymore.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There aren't much to be done here... almost everything is
still valid. The supported boards even reflect the current
driver's state. Yet, some things changed, so let's keep
this document updated.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several things here that are outdated, because this
document was written a long time ago.
Update them to reflect the current status of the driver and
the media subsystem.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This file contains lots of obsoleted information. Update it
to reflect the current status and tools used by Digital TV
users and add pointers to the current locations and to
LinuxTV wiki pages.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Do some cleanups at the document in order to mark two
literal blocks as such.
While here, simplify two block markups, using the less
verbose option (::).
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There aren't many boards supported by this driver. So, add
a list for it manually generated.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This document is... old. The bttv driver was one of the first
drivers at the Kernel. So, the document became a little obsoleted.
Update it to reflect some changes that happened along the time
affecting this driver and the subsystem.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This document is very outdated, and doesn't match the
upstream current way.
Update it, making some parts a little bit more generic.
While the main focus of this document is digital TV
cards, its content also may also help someone with just
analog TV support.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
While this is old, now that we moved the intro part of it,
its contents seem to be valid, if we mention that we're
talking only about the BT878 support.
Update the document title accordingly and remove the obsolete
note from it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This document doesn't describe the DVB subsystem. Instead, it
just contain references to some places.
Better name it and improve its contents.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The content there is somewhat outdated. Update to reflect
the current status.
While here, remove extra spaces, as we won't be preserving
left margin alinment on this document.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Part of this document has nothing to do with the Avermedia
driver. It is generic to the entire subsystem. So, split it
on a separate file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There were some changes at the drivers adding support for
more cards. Update cardlists accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For ipu3 ImgU image processing, the frame data from TNR can feed into
DDR by Output Formatting System or feed into YUV downscaler to do YUV
downscaling for secondary output, which is usually used for display.
current ImgU image pipeline diagram misses the YUV downscaling,
this patch add it to aligh with actual hardware blocks.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch add yavta test command in ipu3.rst as an example on how to
run simple ImgU test using yavta.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add the media graph topologies for the i.MX6Q SabreSD and SabreAuto.
This makes it easier to understand the topology and follow the
entity descriptions in the following sections.
Also clarify that the SabreSD and SabreLite media pipeline config examples
are for the i.MX6Q boards.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Most of the driver-specific documentation is meant to help
users of the media subsystem.
Move them to the admin-guide.
It should be noticed, however, that several of those files
are outdated and will require further work in order to make
them useful again.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Fix the time_for_children symlink in /proc/$PID/ so it properly reflects
that it part of the 'time' namespace
- Add the missing userns limit for the allowed number of time namespaces,
which was half defined but the actual array member was not added. This
went unnoticed as the array has an exessive empty member at the end but
introduced a user visible regression as the output was corrupted.
- Prevent further silent ucount corruption by adding a BUILD_BUG_ON() to
catch half updated data.
-----BEGIN PGP SIGNATURE-----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=wOiC
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull time(keeping) updates from Thomas Gleixner:
- Fix the time_for_children symlink in /proc/$PID/ so it properly
reflects that it part of the 'time' namespace
- Add the missing userns limit for the allowed number of time
namespaces, which was half defined but the actual array member was
not added. This went unnoticed as the array has an exessive empty
member at the end but introduced a user visible regression as the
output was corrupted.
- Prevent further silent ucount corruption by adding a BUILD_BUG_ON()
to catch half updated data.
* tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ucount: Make sure ucounts in /proc/sys/user don't regress again
time/namespace: Add max_time_namespaces ucount
time/namespace: Fix time_for_children symlink
Merge yet more updates from Andrew Morton:
- Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc,
gup, hugetlb, pagemap, memremap)
- Various other things (hfs, ocfs2, kmod, misc, seqfile)
* akpm: (34 commits)
ipc/util.c: sysvipc_find_ipc() should increase position index
kernel/gcov/fs.c: gcov_seq_next() should increase position index
fs/seq_file.c: seq_read(): add info message about buggy .next functions
drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings
change email address for Pali Rohár
selftests: kmod: test disabling module autoloading
selftests: kmod: fix handling test numbers above 9
docs: admin-guide: document the kernel.modprobe sysctl
fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
kmod: make request_module() return an error when autoloading is disabled
mm/memremap: set caching mode for PCI P2PDMA memory to WC
mm/memory_hotplug: add pgprot_t to mhp_params
powerpc/mm: thread pgprot_t through create_section_mapping()
x86/mm: introduce __set_memory_prot()
x86/mm: thread pgprot_t through init_memory_mapping()
mm/memory_hotplug: rename mhp_restrictions to mhp_params
mm/memory_hotplug: drop the flags field from struct mhp_restrictions
mm/special: create generic fallbacks for pte_special() and pte_mkspecial()
mm/vma: introduce VM_ACCESS_FLAGS
mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS
...
Document the kernel.modprobe sysctl in the same place that all the other
kernel.* sysctls are documented. Make sure to mention how to use this
sysctl to completely disable module autoloading, and how this sysctl
relates to CONFIG_STATIC_USERMODEHELPER.
[ebiggers@google.com: v5]
Link: http://lkml.kernel.org/r/20200318230515.171692-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200312202552.241885-4-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 944d9fec8d ("hugetlb: add support for gigantic page allocation
at runtime") has added the run-time allocation of gigantic pages.
However it actually works only at early stages of the system loading,
when the majority of memory is free. After some time the memory gets
fragmented by non-movable pages, so the chances to find a contiguous 1GB
block are getting close to zero. Even dropping caches manually doesn't
help a lot.
At large scale rebooting servers in order to allocate gigantic hugepages
is quite expensive and complex. At the same time keeping some constant
percentage of memory in reserved hugepages even if the workload isn't
using it is a big waste: not all workloads can benefit from using 1 GB
pages.
The following solution can solve the problem:
1) On boot time a dedicated cma area* is reserved. The size is passed
as a kernel argument.
2) Run-time allocations of gigantic hugepages are performed using the
cma allocator and the dedicated cma area
In this case gigantic hugepages can be allocated successfully with a
high probability, however the memory isn't completely wasted if nobody
is using 1GB hugepages: it can be used for pagecache, anon memory, THPs,
etc.
* On a multi-node machine a per-node cma area is allocated on each node.
Following gigantic hugetlb allocation are using the first available
numa node if the mask isn't specified by a user.
Usage:
1) configure the kernel to allocate a cma area for hugetlb allocations:
pass hugetlb_cma=10G as a kernel argument
2) allocate hugetlb pages as usual, e.g.
echo 10 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages
If the option isn't enabled or the allocation of the cma area failed,
the current behavior of the system is preserved.
x86 and arm-64 are covered by this patch, other architectures can be
trivially added later.
The patch contains clean-ups and fixes proposed and implemented by Aslan
Bakirov and Randy Dunlap. It also contains ideas and suggestions
proposed by Rik van Riel, Michal Hocko and Mike Kravetz. Thanks!
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andreas Schaufler <andreas.schaufler@gmx.de>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@kernel.org>
Cc: Aslan Bakirov <aslan@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200407163840.92263-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add documentation of the binderfs 'stats' mount option.
Description taken from the commit message.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/baa0aa81-007d-af46-16a5-91fead0bd1b9@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
"On x86" and "On SPARC" are now definition list terms, like
"On PowerPC", "On other", and "On all".
The Credits list is now a bulleted list, like lots of Credits lists in
other files. This prevents the list from becoming a single long,
unpunctuated sentence in the generated documentation.
I also did a couple of other tiny readability improvements to the
"How do I use the magic SysRq key?" section while I was there.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20200403170701.10852-1-hi@alyssa.is
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
x86/mpx was removed in commit 45fc24e89b
("x86/mpx: remove MPX from arch/x86"), this removes the documentation of
parameter nompx.
Fixes: 45fc24e89b ("x86/mpx: remove MPX from arch/x86")
Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20200402172614.3020-1-jimmyassarsson@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
In commit 357b4da50a ("x86: respect memory size limiting via mem=
parameter") a global varialbe max_mem_size is added to store the value
parsed from 'mem= ', then checked when memory region is added. This truly
stops those DIMMs from being added into system memory during boot-time.
However, it also limits the later memory hotplug functionality. Any DIMM
can't be hotplugged any more if its region is beyond the max_mem_size. We
will get errors like:
[ 216.387164] acpi PNP0C80:02: add_memory failed
[ 216.389301] acpi PNP0C80:02: acpi_memory_enable_device() error
[ 216.392187] acpi PNP0C80:02: Enumeration failure
This will cause issue in a known use case where 'mem=' is added to the
hypervisor. The memory that lies after 'mem=' boundary will be assigned
to KVM guests. After commit 357b4da50a merged, memory can't be extended
dynamically if system memory on hypervisor is not sufficient.
So fix it by also checking if it's during boot-time restricting to add
memory. Otherwise, skip the restriction.
And also add this use case to document of 'mem=' kernel parameter.
Fixes: 357b4da50a ("x86: respect memory size limiting via mem= parameter")
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Link: http://lkml.kernel.org/r/20200204050643.20925-1-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The thp_fault_fallback and thp_file_fallback vmstats are incremented if
either the hugepage allocation fails through the page allocator or the
hugepage charge fails through mem cgroup.
This patch leaves this field untouched but adds two new fields,
thp_{fault,file}_fallback_charge, which is incremented only when the mem
cgroup charge fails.
This distinguishes between attempted hugepage allocations that fail due to
fragmentation (or low memory conditions) and those that fail due to mem
cgroup limits. That can be used to determine the impact of fragmentation
on the system by excluding faults that failed due to memcg usage.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2003061422070.7412@chino.kir.corp.google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The existing thp_fault_fallback indicates when thp attempts to allocate a
hugepage but fails, or if the hugepage cannot be charged to the mem cgroup
hierarchy.
Extend this to shmem as well. Adds a new thp_file_fallback to complement
thp_file_alloc that gets incremented when a hugepage is attempted to be
allocated but fails, or if it cannot be charged to the mem cgroup
hierarchy.
Additionally, remove the check for CONFIG_TRANSPARENT_HUGE_PAGECACHE from
shmem_alloc_hugepage() since it is only called with this configuration
option.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2003061421240.7412@chino.kir.corp.google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael noticed that userns limit for number of time namespaces is missing.
Furthermore, time namespace introduced UCOUNT_TIME_NAMESPACES, but didn't
introduce an array member in user_table[]. It would make array's
initialisation OOB write, but by luck the user_table array has an excessive
empty member (all accesses to the array are limited with UCOUNT_COUNTS - so
it silently reuses the last free member.
Fixes user-visible regression: max_inotify_instances by reason of the
missing UCOUNT_ENTRY() has limited max number of namespaces instead of the
number of inotify instances.
Fixes: 769071ac9f ("ns: Introduce Time Namespace")
Reported-by: Michael Kerrisk (man-pages) <mtk.manpages@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andrei Vagin <avagin@gmail.com>
Acked-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/20200406171342.128733-1-dima@arista.com
- Update the ACPICA code in the kernel to upstream revision 20200326
including:
* Fix for a typo in a comment field (Bob Moore).
* acpiExec namespace init file fixes (Bob Moore).
* Addition of NHLT to the known tables list (Cezary Rojewski).
* Conversion of PlatformCommChannel ASL keyword to PCC (Erik
Kaneda).
* acpiexec cleanup (Erik Kaneda).
* WSMT-related typo fix (Erik Kaneda).
* sprintf() utility function fix (John Levon).
* IVRS IVHD type 11h parsing implementation (Michał Żygowski).
* IVRS IVHD type 10h reserved field name fix (Michał Żygowski).
- Fix ACPI-related CPU hotplug deadlock on x86 (Qian Cai).
- Fix Intel Tiger Lake ACPI device IDs in several places (Gayatri
Kammela).
- Add ACPI backlight blacklist entry for Acer Aspire 5783z (Hans
de Goede).
- Fix documentation of the "acpi_backlight" kernel command line
switch (Randy Dunlap).
- Clean up the acpi_get_psd_map() CPPC library routine (Liguang
Zhang).
-----BEGIN PGP SIGNATURE-----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=b3Dp
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"Additional ACPI updates.
These update the ACPICA code in the kernel to the 20200326 upstream
revision, fix an ACPI-related CPU hotplug deadlock on x86, update
Intel Tiger Lake device IDs in some places, add a new ACPI backlight
blacklist entry, update the "acpi_backlight" kernel command line
switch documentation and clean up a CPPC library routine.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20200326
including:
* Fix for a typo in a comment field (Bob Moore)
* acpiExec namespace init file fixes (Bob Moore)
* Addition of NHLT to the known tables list (Cezary Rojewski)
* Conversion of PlatformCommChannel ASL keyword to PCC (Erik
Kaneda)
* acpiexec cleanup (Erik Kaneda)
* WSMT-related typo fix (Erik Kaneda)
* sprintf() utility function fix (John Levon)
* IVRS IVHD type 11h parsing implementation (Michał Żygowski)
* IVRS IVHD type 10h reserved field name fix (Michał Żygowski)
- Fix ACPI-related CPU hotplug deadlock on x86 (Qian Cai)
- Fix Intel Tiger Lake ACPI device IDs in several places (Gayatri
Kammela)
- Add ACPI backlight blacklist entry for Acer Aspire 5783z (Hans de
Goede)
- Fix documentation of the "acpi_backlight" kernel command line
switch (Randy Dunlap)
- Clean up the acpi_get_psd_map() CPPC library routine (Liguang
Zhang)"
* tag 'acpi-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86: ACPI: fix CPU hotplug deadlock
thermal: int340x_thermal: fix: Update Tiger Lake ACPI device IDs
platform/x86: intel-hid: fix: Update Tiger Lake ACPI device ID
ACPI: Update Tiger Lake ACPI device IDs
ACPI: video: Use native backlight on Acer Aspire 5783z
ACPI: video: Docs update for "acpi_backlight" kernel parameter options
ACPICA: Update version 20200326
ACPICA: Fixes for acpiExec namespace init file
ACPICA: Add NHLT table signature
ACPICA: WSMT: Fix typo, no functional change
ACPICA: utilities: fix sprintf()
ACPICA: acpiexec: remove redeclaration of acpi_gbl_db_opt_no_region_support
ACPICA: Change PlatformCommChannel ASL keyword to PCC
ACPICA: Fix IVRS IVHD type 10h reserved field name
ACPICA: Implement IVRS IVHD type 11h parsing
ACPICA: Fix a typo in a comment field
ACPI: CPPC: clean up acpi_get_psd_map()
- Fix corner-case suspend-to-idle wakeup issue on systems where
the ACPI SCI is shared with another wakeup source (Hans de Goede).
- Add document describing system-wide suspend and resume code flows
to the admin guide (Rafael Wysocki).
- Add kernel command line option to set pm_debug_messages (Chen Yu).
- Choose schedutil as the preferred scaling governor by default on
ARM big.LITTLE systems and on x86 systems using the intel_pstate
driver in the passive mode (Linus Walleij, Rafael Wysocki).
- Drop racy and redundant checks from the PM core's device_prepare()
routine (Rafael Wysocki).
- Make resume from hibernation take the hibernation_restore() return
value into account (Dexuan Cui).
-----BEGIN PGP SIGNATURE-----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=QFDr
-----END PGP SIGNATURE-----
Merge tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"Additional power management updates.
These fix a corner-case suspend-to-idle wakeup issue on systems where
the ACPI SCI is shared with another wakeup source, add a kernel
command line option to set pm_debug_messages via the kernel command
line, add a document desctibing system-wide suspend and resume code
flows, modify cpufreq Kconfig to choose schedutil as the preferred
governor by default in a couple of cases and do some assorted
cleanups.
Specifics:
- Fix corner-case suspend-to-idle wakeup issue on systems where the
ACPI SCI is shared with another wakeup source (Hans de Goede).
- Add document describing system-wide suspend and resume code flows
to the admin guide (Rafael Wysocki).
- Add kernel command line option to set pm_debug_messages (Chen Yu).
- Choose schedutil as the preferred scaling governor by default on
ARM big.LITTLE systems and on x86 systems using the intel_pstate
driver in the passive mode (Linus Walleij, Rafael Wysocki).
- Drop racy and redundant checks from the PM core's device_prepare()
routine (Rafael Wysocki).
- Make resume from hibernation take the hibernation_restore() return
value into account (Dexuan Cui)"
* tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler()
ACPI: PM: Add acpi_[un]register_wakeup_handler()
Documentation: PM: sleep: Document system-wide suspend code flows
cpufreq: Select schedutil when using big.LITTLE
PM: sleep: Add pm_debug_messages kernel command line option
PM: sleep: core: Drop racy and redundant checks from device_prepare()
PM: hibernate: Propagate the return value of hibernation_restore()
cpufreq: intel_pstate: Select schedutil as the default governor
