If the slang lib is not installed on the system, perf c2c tool disables TUI
mode and roll back to use stdio mode; but the flag 'c2c.use_stdio' is
missed to set true and thus it wrongly applies UI quirks in the function
ui_quirks().
This commit forces to use stdio interface if slang is not supported, and
it can avoid to apply the UI quirks and show the correct metric header.
Before:
=================================================
Shared Cache Line Distribution Pareto
=================================================
-------------------------------------------------------------------------------
0 0 0 99 0 0 0 0xaaaac17d6000
-------------------------------------------------------------------------------
0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0
0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0
After:
=================================================
Shared Cache Line Distribution Pareto
=================================================
-------------------------------------------------------------------------------
0 0 0 99 0 0 0 0xaaaac17d6000
-------------------------------------------------------------------------------
0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0
0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0
Fixes: 5a1a99cd2e ("perf c2c report: Add main TUI browser")
Reported-by: Joe Mario <jmario@redhat.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220526145400.611249-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We support short command 'rec*' for 'record' and 'rep*' for 'report' in
lots of sub-commands, but the matching is not quite strict currnetly.
It may be puzzling sometime, like we mis-type a 'recport' to report but
it will perform 'record' in fact without any message.
To fix this, add a check to ensure that the short cmd is valid prefix
of the real command.
Committer testing:
[root@quaco ~]# perf c2c re sleep 1
Usage: perf c2c {record|report}
-v, --verbose be more verbose (show counter open errors, etc)
# perf c2c rec sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.038 MB perf.data (16 samples) ]
# perf c2c recport sleep 1
Usage: perf c2c {record|report}
-v, --verbose be more verbose (show counter open errors, etc)
# perf c2c record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.038 MB perf.data (15 samples) ]
# perf c2c records sleep 1
Usage: perf c2c {record|report}
-v, --verbose be more verbose (show counter open errors, etc)
#
Signed-off-by: Wei Li <liwei391@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rui Xiang <rui.xiang@huawei.com>
Link: http://lore.kernel.org/lkml/20220325092032.2956161-1-liwei391@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
The perf_mem_events__name() can generate the mem-load event name.
It uses a variable 'mem_loads_name__init' to avoid generating the
event name every time (because perf_pmu__scan takes some time).
The perf_mem_events__name() assumes the pmu is "cpu" but it's not
correct for hybrid platform. For Alderlake, the pmu is "cpu_core" or
"cpu_atom"
Introduce a new parameter 'pmu_name' in perf_mem_events__name
to let the caller specify a pmu name.
Considering such event name is x86 specific, so move
perf_mem_events[] to arch/x86/util/mem-events.c.
We still keep the variable 'mem_loads_name__init' but it's only
used when pmu_name is NULL (compatible for original behavior). When
pmu_name is not NULL (e.g. "cpu_core"), this patch doesn't have
optimization. That can be implemented in follow up patch.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210527001610.10553-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When user doesn't specify event name, perf c2c tool enables both the
load and store events, and this leads to failure for opening the
duplicate PMU device for AUX trace.
After the memory event PERF_MEM_EVENTS__LOAD_STORE is introduced, when
the user doesn't specify event name, this patch converts the required
operation to PERF_MEM_EVENTS__LOAD_STORE if the arch supports it.
Otherwise, the tool still rolls back to enable events
PERF_MEM_EVENTS__LOAD and PERF_MEM_EVENTS__STORE.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201106094853.21082-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Different architectures might use different event or different event
parameters for memory profiling, this patch introduces a weak
perf_mem_events__ptr() function which allows to return back a
architecture specific memory event.
Since the variable 'perf_mem_events' can be only accessed by the
perf_mem_events__ptr() function, mark the variable as 'static', this
allows the architectures to define its own memory event array.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201106094853.21082-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
"rmt_hit" is accounted into two metrics: one is accounted into the
metrics "LLC Ld Miss" (see the function llc_miss() for calculation
"llcmiss"); and it's accounted into metrics "LLC Load Hit". Thus,
for the literal meaning, it is contradictory that "rmt_hit" is
accounted for both "LLC Ld Miss" (LLC miss) and "LLC Load Hit"
(LLC hit).
Thus this is easily to introduce confusion: "LLC Load Hit" gives
impression that all items belong to it are LLC hit; in fact "rmt_hit"
is LLC miss and remote cache hit.
To give out clear semantics for metric "LLC Load Hit", "rmt_hit" is
moved out from it and changes "LLC Load Hit" to contain two items:
LLC Load Hit = LLC's hit ("ld_llchit") + LLC's hitm ("lcl_hitm")
For output alignment, adjusts the header for "LLC Load Hit".
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Joe Mario <jmario@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201014050921.5591-8-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Local and remote HITM use the headers 'Lcl' and 'Rmt' respectively,
suppose if we want to extend the tool to display these two dimensions
under any one metrics, users cannot understand the semantics if only
based on the header string 'Lcl' or 'Rmt'.
To explicit express the meaning for HITM items, this patch changes the
headers string as "LclHitm" and "RmtHitm", the strings are more readable
and this allows to extend metrics for using HITM items.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Joe Mario <jmario@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201014050921.5591-6-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The metrics "LLC Load Hitm" contains two items: one is "local Hitm" and
another is "remote Hitm".
"local Hitm" means: L3 HIT and was serviced by another processor core
with a cross core snoop where modified copies were found; it's no doubt
that "local Hitm" belongs to LLC access.
But for "remote Hitm", based on the code in util/mem-events, it's the
event for remote cache HIT and was serviced by another processor core
with modified copies. Thus the remote Hitm is a remote cache's hit and
actually it's LLC load miss.
Now the display format gives users the impression that "local Hitm" and
"remote Hitm" both belong to the LLC load, but this is not the fact as
described.
This patch changes the header from "LLC Load Hitm" to "Load Hitm", this
can avoid the give the wrong impression that all Hitm belong to LLC.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Joe Mario <jmario@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201014050921.5591-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The metrics are not organized based on memory hierarchy, e.g. the tool
doesn't organize the metrics order based on memory nodes from the close
node (e.g. L1/L2 cache) to far node (e.g. L3 cache and DRAM).
To output metrics with more friendly form, this patch refines the
metrics order based on memory hierarchy:
"Core Load Hit" => "LLC Load Hit" => "LLC Ld Miss" => "Load Dram"
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Joe Mario <jmario@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201014050921.5591-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To view the statistics with "breakdown" mode, it's good to show the
summary numbers for the total records, all stores and all loads, then
the sequential conlumns can be used to break into more detailed items.
To achieve this purpose, this patch displays the summary numbers for
records/stores/loads continuously and places them before breakdown
items, this can allow uses to easily read the summarized statistics.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Joe Mario <jmario@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201014050921.5591-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit b027cc6fdf ("perf c2c: Fix 'perf c2c record -e list' to
show the default events used"), "perf c2c" tool can show the memory
events properly, it's no reason to still suggest user to use the
command "perf mem record -e list" for showing events.
This patch updates the usage for showing memory events with command
"perf c2c record -e list".
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20201011121022.22409-1-leo.yan@linaro.org
As they are 'struct evsel' methods or related routines, not part of
tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
