Commit Graph

280 Commits

Author SHA1 Message Date
Martin KaFai Lau
90e02896f1 bpf: Add test for bpf_redirect to ipip/ip6tnl
The test creates two netns, ns1 and ns2.  The host (the default netns)
has an ipip or ip6tnl dev configured for tunneling traffic to the ns2.

    ping VIPS from ns1 <----> host <--tunnel--> ns2 (VIPs at loopback)

The test is to have ns1 pinging VIPs configured at the loopback
interface in ns2.

The VIPs are 10.10.1.102 and 2401:face::66 (which are configured
at lo@ns2). [Note: 0x66 => 102].

At ns1, the VIPs are routed _via_ the host.

At the host, bpf programs are installed at the veth to redirect packets
from a veth to the ipip/ip6tnl.  The test is configured in a way so
that both ingress and egress can be tested.

At ns2, the ipip/ip6tnl dev is configured with the local and remote address
specified.  The return path is routed to the dev ipip/ip6tnl.

During egress test, the host also locally tests pinging the VIPs to ensure
that bpf_redirect at egress also works for the direct egress (i.e. not
forwarding from dev ve1 to ve2).

Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-12 23:38:07 -05:00
Linus Torvalds
2a26d99b25 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "Lots of fixes, mostly drivers as is usually the case.

   1) Don't treat zero DMA address as invalid in vmxnet3, from Alexey
      Khoroshilov.

   2) Fix element timeouts in netfilter's nft_dynset, from Anders K.
      Pedersen.

   3) Don't put aead_req crypto struct on the stack in mac80211, from
      Ard Biesheuvel.

   4) Several uninitialized variable warning fixes from Arnd Bergmann.

   5) Fix memory leak in cxgb4, from Colin Ian King.

   6) Fix bpf handling of VLAN header push/pop, from Daniel Borkmann.

   7) Several VRF semantic fixes from David Ahern.

   8) Set skb->protocol properly in ip6_tnl_xmit(), from Eli Cooper.

   9) Socket needs to be locked in udp_disconnect(), from Eric Dumazet.

  10) Div-by-zero on 32-bit fix in mlx4 driver, from Eugenia Emantayev.

  11) Fix stale link state during failover in NCSCI driver, from Gavin
      Shan.

  12) Fix netdev lower adjacency list traversal, from Ido Schimmel.

  13) Propvide proper handle when emitting notifications of filter
      deletes, from Jamal Hadi Salim.

  14) Memory leaks and big-endian issues in rtl8xxxu, from Jes Sorensen.

  15) Fix DESYNC_FACTOR handling in ipv6, from Jiri Bohac.

  16) Several routing offload fixes in mlxsw driver, from Jiri Pirko.

  17) Fix broadcast sync problem in TIPC, from Jon Paul Maloy.

  18) Validate chunk len before using it in SCTP, from Marcelo Ricardo
      Leitner.

  19) Revert a netns locking change that causes regressions, from Paul
      Moore.

  20) Add recursion limit to GRO handling, from Sabrina Dubroca.

  21) GFP_KERNEL in irq context fix in ibmvnic, from Thomas Falcon.

  22) Avoid accessing stale vxlan/geneve socket in data path, from
      Pravin Shelar"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (189 commits)
  geneve: avoid using stale geneve socket.
  vxlan: avoid using stale vxlan socket.
  qede: Fix out-of-bound fastpath memory access
  net: phy: dp83848: add dp83822 PHY support
  enic: fix rq disable
  tipc: fix broadcast link synchronization problem
  ibmvnic: Fix missing brackets in init_sub_crq_irqs
  ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context
  Revert "ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context"
  arch/powerpc: Update parameters for csum_tcpudp_magic & csum_tcpudp_nofold
  net/mlx4_en: Save slave ethtool stats command
  net/mlx4_en: Fix potential deadlock in port statistics flow
  net/mlx4: Fix firmware command timeout during interrupt test
  net/mlx4_core: Do not access comm channel if it has not yet been initialized
  net/mlx4_en: Fix panic during reboot
  net/mlx4_en: Process all completions in RX rings after port goes up
  net/mlx4_en: Resolve dividing by zero in 32-bit system
  net/mlx4_core: Change the default value of enable_qos
  net/mlx4_core: Avoid setting ports to auto when only one port type is supported
  net/mlx4_core: Fix the resource-type enum in res tracker to conform to FW spec
  ...
2016-10-29 20:33:20 -07:00
Daniel Borkmann
96a8eb1eee bpf: fix samples to add fake KBUILD_MODNAME
Some of the sample files are causing issues when they are loaded with tc
and cls_bpf, meaning tc bails out while trying to parse the resulting ELF
file as program/map/etc sections are not present, which can be easily
spotted with readelf(1).

Currently, BPF samples are including some of the kernel headers and mid
term we should change them to refrain from this, really. When dynamic
debugging is enabled, we bail out due to undeclared KBUILD_MODNAME, which
is easily overlooked in the build as clang spills this along with other
noisy warnings from various header includes, and llc still generates an
ELF file with mentioned characteristics. For just playing around with BPF
examples, this can be a bit of a hurdle to take.

Just add a fake KBUILD_MODNAME as a band-aid to fix the issue, same is
done in xdp*_kern samples already.

Fixes: 65d472fb00 ("samples/bpf: add 'pointer to packet' tests")
Fixes: 6afb1e28b8 ("samples/bpf: Add tunnel set/get tests.")
Fixes: a3f7461734 ("cgroup: bpf: Add an example to do cgroup checking in BPF")
Reported-by: Chandrasekar Kannan <ckannan@console.to>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29 14:46:12 -04:00
Linus Torvalds
5d89d9f502 linux-kselftest-4.9-rc1-update
This update consists of:
 
 - Fixes and improvements to existing tests
 - Moving code from Documentation to selftests, samples, and tools.
 
   Moves dnotify_test, prctl, ptp, vDSO, ia64, watchdog, and networking
   tests from Documentation to selftests.
 
   Moves mic/mpssd, misc-devices/mei, timers, watchdog, auxdisplay, and
   blackfin examples from Documentation to samples.
 
   Moves accounting, laptops/dslm, and pcmcia/crc32hash tools from
   Documentation to tools.
 
   Deletes BUILD_DOCSRC and its dependencies.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX/6zUAAoJEAsCRMQNDUMczIEP/0kH+yjJ3El4GYIokspR1/UU
 ++sy4XMzrD1UPy90v+ftcg4ss5R80r0v7EZ59k1UjDJSZ6WATHHGoZKCS2Dy3xcq
 i+0vm7Bawh7YWrXD3TunwaL97lwb2DdVTSxRXuU4Hfv+oVynUfh/+ZlCH6RCM2nm
 ZJE5PDYiq4nTVSRqFB2FyRE6yay5dPvpQ2ArwnSEw+ku4C+ZdGTGCWzS+aZBwZM/
 ykePkGLVRXz9FsWTCmipJzYu0Z/M4xEGlfXQZiiLG2HicbJNP6AqJImbQrANm+TW
 RFigYpofdhr9XG5TKTLIudaRt9qB6BE0mYEApZXH8U7NrHElfO9BBMEwzajl0V/2
 q/r5iej/CJult3zsfkhdHo7GLXpOaDLyoXiUI6UTgL0XOdWLAWTqDYx4JJz9sXxp
 B9dwKJeP5HLipk6FMkAHgJM90JKQFd/nLDKxeWexbMu/b/yQ2C9AR7NpdQ+c1X7I
 8W8UNEi/fnK75+r4t3NfeD2/5boq/jwujSKEMDQm/3R8L8EFYYb/TRoujFn89Na3
 wbZLV3hBL+KQ5lRyIx7X8RKyVJv1nlo9Wh57ItJed6zvGp5EmsI8w+DER2RfbO2c
 HR2JPDKSxmU8O2WBfDW5QoiPQH8Lssd147Ir0UFE7mwBXgWWsmxJxDpufizAXwyJ
 qnELJ9X3UFIdydtoObLr
 =60kH
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-4.9-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:
 "This update consists of:

   - Fixes and improvements to existing tests

   - Moving code from Documentation to selftests, samples, and tools:

     * Moves dnotify_test, prctl, ptp, vDSO, ia64, watchdog, and
       networking tests from Documentation to selftests.

     * Moves mic/mpssd, misc-devices/mei, timers, watchdog, auxdisplay,
       and blackfin examples from Documentation to samples.

     * Moves accounting, laptops/dslm, and pcmcia/crc32hash tools from
       Documentation to tools.

     * Deletes BUILD_DOCSRC and its dependencies"

* tag 'linux-kselftest-4.9-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (21 commits)
  selftests/futex: Check ANSI terminal color support
  Doc: update 00-INDEX files to reflect the runnable code move
  samples: move blackfin gptimers-example from Documentation
  tools: move pcmcia crc32hash tool from Documentation
  tools: move laptops dslm tool from Documentation
  tools: move accounting tool from Documentation
  samples: move auxdisplay example code from Documentation
  samples: move watchdog example code from Documentation
  samples: move timers example code from Documentation
  samples: move misc-devices/mei example code from Documentation
  samples: move mic/mpssd example code from Documentation
  selftests: Move networking/timestamping from Documentation
  selftests: move watchdog tests from Documentation/watchdog
  selftests: move ia64 tests from Documentation/ia64
  selftests: move vDSO tests from Documentation/vDSO
  selftests: move ptp tests from Documentation/ptp
  selftests: move prctl tests from Documentation/prctl
  selftests: move dnotify_test from Documentation/filesystems
  selftests/timers: Add missing error code assignment before test
  selftests/zram: replace ZRAM_LZ4_COMPRESS
  ...
2016-10-14 15:17:12 -07:00
Shuah Khan
1848929251 samples: move blackfin gptimers-example from Documentation
Move blackfin gptimers-example to samples and remove it from Documentation
Makefile. Update samples Kconfig and Makefile to build gptimers-example.

blackfin is the last CONFIG_BUILD_DOCSRC target in Documentation/Makefile.
Hence this patch also includes changes to remove CONFIG_BUILD_DOCSRC from
Makefile and lib/Kconfig.debug and updates VIDEO_PCI_SKELETON dependency
on BUILD_DOCSRC.

Documentation/Makefile is not deleted to avoid braking make htmldocs and
make distclean.

Acked-by: Michal Marek <mmarek@suse.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-10-10 07:12:02 -06:00
Linus Torvalds
521f397085 rpmsg updates for v4.9
The bulk of these patches involve splitting the rpmsg implementation into a
 framework/API part and a virtio specific backend part. It then adds the
 Qualcomm Shared Memory Device (SMD) as an additional supported wire format.
 
 Also included is a set of code style cleanups that have been lingering for a
 while.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX9XANAAoJEAsfOT8Nma3FwocP/1EMKjeyMOiyS/giPNye7EjQ
 3EIms4Or6F4ULo+/mZTgyF69RGBirFgYm2GKs2GgFcAnf4bZRmXpPNYiuJZ8LGQe
 9gep35eZ+vE+KArba26Sau1bjpPiWsokeJg7JPBj8KE3uR1lH3QTVjoHa3dPXRwa
 NrImfZw3P2/RTgtIoDJA6CoCT8cBIiitcA++1bNGhHTu7R5hkw25mse1OFJ8sb1l
 D3rsnmoTcXZqY2dDA9GYqy9/krBU69Xe7QJYCyjuNI0FHIqS60M/gTJS+v4fxJbX
 ueM7Qsimdbmcm/tINeT3RcyM0gUrGukDgrEhwg+Ipohhji9tf7AYx0hIJ11Ylzq+
 m2orJ5xDRg3/mxFMFg4bqWXKt0uYUSBMiztAneCdOdTPR5DBpVB47/i+Nqq0t5fm
 Ql7Ev4G877A2cZp3O/xHahGCzk9xeAWnRonGeWGqIS0V2tCXWMuVtzwBB5oa0Pd0
 nlb9JFnmb2lzU5ud/y681B7LdwDEjlW8o8u7JPOqEbXTVEjOebdy/nXpBCg7I9Ik
 NwQLOQ8B5eOGcrki7W7qodx8BCMyEFsHrRoozdvloXePCgwOuhA5s+Ai8VqJi9Yr
 9xpQpd4QHtbYHXbyM4/Pn/93MTIclcHNdE8D2qJ4/nlVtbbjwQe8p2cT7THfXTK+
 GVqj+PrmRoiVS9MQ0C+1
 =3bKf
 -----END PGP SIGNATURE-----

Merge tag 'rpmsg-v4.9' of git://github.com/andersson/remoteproc

Pull rpmsg updates from Bjorn Andersson:
 "The bulk of these patches involve splitting the rpmsg implementation
  into a framework/API part and a virtio specific backend part. It then
  adds the Qualcomm Shared Memory Device (SMD) as an additional
  supported wire format.

  Also included is a set of code style cleanups that have been lingering
  for a while"

* tag 'rpmsg-v4.9' of git://github.com/andersson/remoteproc: (26 commits)
  rpmsg: smd: fix dependency on QCOM_SMD=n
  rpmsg: Introduce Qualcomm SMD backend
  rpmsg: Allow callback to return errors
  rpmsg: Move virtio specifics from public header
  rpmsg: virtio: Hide vrp pointer from the public API
  rpmsg: Hide rpmsg indirection tables
  rpmsg: Split rpmsg core and virtio backend
  rpmsg: Split off generic tail of create_channel()
  rpmsg: Move helper for finding rpmsg devices to core
  rpmsg: Move endpoint related interface to rpmsg core
  rpmsg: Indirection table for rpmsg_endpoint operations
  rpmsg: Move rpmsg_device API to new file
  rpmsg: Introduce indirection table for rpmsg_device operations
  rpmsg: Clean up rpmsg device vs channel naming
  rpmsg: Make rpmsg_create_ept() take channel_info struct
  rpmsg: rpmsg_send() operations takes rpmsg_endpoint
  rpmsg: Name rpmsg devices based on channel id
  rpmsg: Enable matching devices with drivers based on DT
  rpmsg: Drop prototypes for non-existing functions
  samples/rpmsg: add support for multiple instances
  ...
2016-10-06 17:03:49 -07:00
Josef Bacik
484611357c bpf: allow access into map value arrays
Suppose you have a map array value that is something like this

struct foo {
	unsigned iter;
	int array[SOME_CONSTANT];
};

You can easily insert this into an array, but you cannot modify the contents of
foo->array[] after the fact.  This is because we have no way to verify we won't
go off the end of the array at verification time.  This patch provides a start
for this work.  We accomplish this by keeping track of a minimum and maximum
value a register could be while we're checking the code.  Then at the time we
try to do an access into a MAP_VALUE we verify that the maximum offset into that
region is a valid access into that memory region.  So in practice, code such as
this

unsigned index = 0;

if (foo->iter >= SOME_CONSTANT)
	foo->iter = index;
else
	index = foo->iter++;
foo->array[index] = bar;

would be allowed, as we can verify that index will always be between 0 and
SOME_CONSTANT-1.  If you wish to use signed values you'll have to have an extra
check to make sure the index isn't less than 0, or do something like index %=
SOME_CONSTANT.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-29 01:35:35 -04:00
Naveen N. Rao
973d94d8a8 bpf samples: update tracex5 sample to use __seccomp_filter
seccomp_phase1() does not exist anymore. Instead, update sample to use
__seccomp_filter(). While at it, set max locked memory to unlimited.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27 03:48:58 -04:00
Naveen N. Rao
2b064fff85 bpf samples: fix compiler errors with sockex2 and sockex3
These samples fail to compile as 'struct flow_keys' conflicts with
definition in net/flow_dissector.h. Fix the same by renaming the
structure used in the sample.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27 03:48:58 -04:00
Shuah Khan
8fc07ebe63 samples: move auxdisplay example code from Documentation
Move auxdisplay examples to samples and remove it from Documentation
Makefile. Create a new Makefile to build auxdisplay. It can be built
from top level directory or from auxdisplay directory:

Run make -C samples/auxdisplay or cd samples/auxdisplay; make

Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-09-23 11:52:32 -06:00
Shuah Khan
071bf69a02 samples: move watchdog example code from Documentation
Move watchdog examples to samples and remove it from Documentation
Makefile. Create a new Makefile to build watchdog. It can be built
from top level directory or from watchdog directory:

Run make -C samples/watchdog or cd samples/watchdog; make

Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-09-23 11:52:14 -06:00
Shuah Khan
155fe001c6 samples: move timers example code from Documentation
Move timers examples to samples and remove it from Documentation
Makefile. Create a new Makefile to build timers. It can be built
from top level directory or from timers directory:

Run make -C samples/timers or cd samples/timers; make

Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-09-23 11:51:58 -06:00
Shuah Khan
986b891ad1 samples: move misc-devices/mei example code from Documentation
Move misc-devices/mei examples to samples/mei and remove it from
Documentation Makefile. Delete misc-devices/Makefile.

Create a new Makefile to build samples/mei. It can be built from top
level directory or from mei directory:

Run make -C samples/mei or cd samples/mei; make

Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-09-23 11:51:43 -06:00
Daniel Borkmann
7d95b0ab5b bpf: add test cases for direct packet access
Add couple of test cases for direct write and the negative size issue, and
also adjust the direct packet access test4 since it asserts that writes are
not possible, but since we've just added support for writes, we need to
invert the verdict to ACCEPT, of course. Summary: 133 PASSED, 0 FAILED.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20 23:32:11 -04:00
Shuah Khan
6bee835dd5 samples: move mic/mpssd example code from Documentation
Move mic/mpssd examples to samples and remove it from Documentation
Makefile. Create a new Makefile to build mic/mpssd. It can be built
from top level directory or from mic/mpssd directory:

Run make -C samples/mic/mpssd or cd samples/mic/mpssd; make

Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2016-09-20 12:38:48 -06:00
Alexei Starovoitov
173ca26e9b samples/bpf: add comprehensive ipip, ipip6, ip6ip6 test
the test creates 3 namespaces with veth connected via bridge.
First two namespaces simulate two different hosts with the same
IPv4 and IPv6 addresses configured on the tunnel interface and they
communicate with outside world via standard tunnels.
Third namespace creates collect_md tunnel that is driven by BPF
program which selects different remote host (either first or
second namespace) based on tcp dest port number while tcp dst
ip is the same.
This scenario is rough approximation of load balancer use case.
The tests check both traditional tunnel configuration and collect_md mode.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17 10:13:07 -04:00
Alexei Starovoitov
a1c82704d1 samples/bpf: extend test_tunnel_bpf.sh with IPIP test
extend existing tests for vxlan, geneve, gre to include IPIP tunnel.
It tests both traditional tunnel configuration and
dynamic via bpf helpers.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17 10:13:07 -04:00
Bjorn Andersson
4b83c52a21 rpmsg: Allow callback to return errors
Some rpmsg backends support holding on to and redelivering messages upon
failed handling of them, so provide a way for the callback to report and
error and allow the backends to handle this.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-08 22:15:25 -07:00
Bjorn Andersson
92e1de51bf rpmsg: Clean up rpmsg device vs channel naming
The rpmsg device representing struct is called rpmsg_channel and the
variable name used throughout is rpdev, with the communication happening
on endpoints it's clearer to just call this a "device" in a public API.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-08 22:15:20 -07:00
Bjorn Andersson
2a48d7322d rpmsg: rpmsg_send() operations takes rpmsg_endpoint
The rpmsg_send() operations has been taking a rpmsg_device, but this
forces users of secondary rpmsg_endpoints to use the rpmsg_sendto()
interface - by extracting source and destination from the given data
structures. If we instead pass the rpmsg_endpoint to these functions a
service can use rpmsg_sendto() to respond to messages, even on secondary
endpoints.

In addition this would allow us to support operations on multiple
channels in future backends that does not support off-channel
operations.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-09-08 22:15:19 -07:00
Daniel Borkmann
2d2be8cab2 bpf: fix range propagation on direct packet access
LLVM can generate code that tests for direct packet access via
skb->data/data_end in a way that currently gets rejected by the
verifier, example:

  [...]
   7: (61) r3 = *(u32 *)(r6 +80)
   8: (61) r9 = *(u32 *)(r6 +76)
   9: (bf) r2 = r9
  10: (07) r2 += 54
  11: (3d) if r3 >= r2 goto pc+12
   R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx
   R9=pkt(id=0,off=0,r=0) R10=fp
  12: (18) r4 = 0xffffff7a
  14: (05) goto pc+430
  [...]

  from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv
                 R6=ctx R9=pkt(id=0,off=0,r=0) R10=fp
  24: (7b) *(u64 *)(r10 -40) = r1
  25: (b7) r1 = 0
  26: (63) *(u32 *)(r6 +56) = r1
  27: (b7) r2 = 40
  28: (71) r8 = *(u8 *)(r9 +20)
  invalid access to packet, off=20 size=1, R9(id=0,off=0,r=0)

The reason why this gets rejected despite a proper test is that we
currently call find_good_pkt_pointers() only in case where we detect
tests like rX > pkt_end, where rX is of type pkt(id=Y,off=Z,r=0) and
derived, for example, from a register of type pkt(id=Y,off=0,r=0)
pointing to skb->data. find_good_pkt_pointers() then fills the range
in the current branch to pkt(id=Y,off=0,r=Z) on success.

For above case, we need to extend that to recognize pkt_end >= rX
pattern and mark the other branch that is taken on success with the
appropriate pkt(id=Y,off=0,r=Z) type via find_good_pkt_pointers().
Since eBPF operates on BPF_JGT (>) and BPF_JGE (>=), these are the
only two practical options to test for from what LLVM could have
generated, since there's no such thing as BPF_JLT (<) or BPF_JLE (<=)
that we would need to take into account as well.

After the fix:

  [...]
   7: (61) r3 = *(u32 *)(r6 +80)
   8: (61) r9 = *(u32 *)(r6 +76)
   9: (bf) r2 = r9
  10: (07) r2 += 54
  11: (3d) if r3 >= r2 goto pc+12
   R1=inv R2=pkt(id=0,off=54,r=0) R3=pkt_end R4=inv R6=ctx
   R9=pkt(id=0,off=0,r=0) R10=fp
  12: (18) r4 = 0xffffff7a
  14: (05) goto pc+430
  [...]

  from 11 to 24: R1=inv R2=pkt(id=0,off=54,r=54) R3=pkt_end R4=inv
                 R6=ctx R9=pkt(id=0,off=0,r=54) R10=fp
  24: (7b) *(u64 *)(r10 -40) = r1
  25: (b7) r1 = 0
  26: (63) *(u32 *)(r6 +56) = r1
  27: (b7) r2 = 40
  28: (71) r8 = *(u8 *)(r9 +20)
  29: (bf) r1 = r8
  30: (25) if r8 > 0x3c goto pc+47
   R1=inv56 R2=imm40 R3=pkt_end R4=inv R6=ctx R8=inv56
   R9=pkt(id=0,off=0,r=54) R10=fp
  31: (b7) r1 = 1
  [...]

Verifier test cases are also added in this work, one that demonstrates
the mentioned example here and one that tries a bad packet access for
the current/fall-through branch (the one with types pkt(id=X,off=Y,r=0),
pkt(id=X,off=0,r=0)), then a case with good and bad accesses, and two
with both test variants (>, >=).

Fixes: 969bf05eb3 ("bpf: direct packet access")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08 17:28:37 -07:00
Brendan Gregg
72874418e4 samples/bpf: add sampleip example
sample instruction pointer and frequency count in a BPF map

Signed-off-by: Brendan Gregg <bgregg@netflix.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02 10:46:45 -07:00
Alexei Starovoitov
1c47910ef8 samples/bpf: add perf_event+bpf example
The bpf program is called 50 times a second and does hashmap[kern&user_stackid]++
It's primary purpose to check that key bpf helpers like map lookup, update,
get_stackid, trace_printk and ctx access are all working.
It checks:
- PERF_COUNT_HW_CPU_CYCLES on all cpus
- PERF_COUNT_HW_CPU_CYCLES for current process and inherited perf_events to children
- PERF_COUNT_SW_CPU_CLOCK on all cpus
- PERF_COUNT_SW_CPU_CLOCK for current process

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02 10:46:45 -07:00
William Tu
6afb1e28b8 samples/bpf: Add tunnel set/get tests.
The patch creates sample code exercising bpf_skb_{set,get}_tunnel_key,
and bpf_skb_{set,get}_tunnel_opt for GRE, VXLAN, and GENEVE.  A native
tunnel device is created in a namespace to interact with a lwtunnel
device out of the namespace, with metadata enabled.  The bpf_skb_set_*
program is attached to tc egress and bpf_skb_get_* is attached to egress
qdisc.  A ping between two tunnels is used to verify correctness and
the result of bpf_skb_get_* printed by bpf_trace_printk.

Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19 22:42:44 -07:00
David S. Miller
60747ef4d1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Minor overlapping changes for both merge conflicts.

Resolution work done by Stephen Rothwell was used
as a reference.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18 01:17:32 -04:00
Linus Torvalds
184ca82348 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Buffers powersave frame test is reversed in cfg80211, fix from Felix
    Fietkau.

 2) Remove bogus WARN_ON in openvswitch, from Jarno Rajahalme.

 3) Fix some tg3 ethtool logic bugs, and one that would cause no
    interrupts to be generated when rx-coalescing is set to 0.  From
    Satish Baddipadige and Siva Reddy Kallam.

 4) QLCNIC mailbox corruption and napi budget handling fix from Manish
    Chopra.

 5) Fix fib_trie logic when walking the trie during /proc/net/route
    output than can access a stale node pointer.  From David Forster.

 6) Several sctp_diag fixes from Phil Sutter.

 7) PAUSE frame handling fixes in mlxsw driver from Ido Schimmel.

 8) Checksum fixup fixes in bpf from Daniel Borkmann.

 9) Memork leaks in nfnetlink, from Liping Zhang.

10) Use after free in rxrpc, from David Howells.

11) Use after free in new skb_array code of macvtap driver, from Jason
    Wang.

12) Calipso resource leak, from Colin Ian King.

13) mediatek bug fixes (missing stats sync init, etc.) from Sean Wang.

14) Fix bpf non-linear packet write helpers, from Daniel Borkmann.

15) Fix lockdep splats in macsec, from Sabrina Dubroca.

16) hv_netvsc bug fixes from Vitaly Kuznetsov, mostly to do with VF
    handling.

17) Various tc-action bug fixes, from CONG Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
  net_sched: allow flushing tc police actions
  net_sched: unify the init logic for act_police
  net_sched: convert tcf_exts from list to pointer array
  net_sched: move tc offload macros to pkt_cls.h
  net_sched: fix a typo in tc_for_each_action()
  net_sched: remove an unnecessary list_del()
  net_sched: remove the leftover cleanup_a()
  mlxsw: spectrum: Allow packets to be trapped from any PG
  mlxsw: spectrum: Unmap 802.1Q FID before destroying it
  mlxsw: spectrum: Add missing rollbacks in error path
  mlxsw: reg: Fix missing op field fill-up
  mlxsw: spectrum: Trap loop-backed packets
  mlxsw: spectrum: Add missing packet traps
  mlxsw: spectrum: Mark port as active before registering it
  mlxsw: spectrum: Create PVID vPort before registering netdevice
  mlxsw: spectrum: Remove redundant errors from the code
  mlxsw: spectrum: Don't return upon error in removal path
  i40e: check for and deal with non-contiguous TCs
  ixgbe: Re-enable ability to toggle VLAN filtering
  ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths
  ...
2016-08-17 17:26:58 -07:00
Aaron Yue
1633ac0a2e samples/bpf: add verifier tests for the helper access to the packet
test various corner cases of the helper function access to the packet
via crafted XDP programs.

Signed-off-by: Aaron Yue <haoxuany@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12 21:56:18 -07:00
Daniel Borkmann
747ea55e4f bpf: fix bpf_skb_in_cgroup helper naming
While hashing out BPF's current_task_under_cgroup helper bits, it came
to discussion that the skb_in_cgroup helper name was suboptimally chosen.

Tejun says:

  So, I think in_cgroup should mean that the object is in that
  particular cgroup while under_cgroup in the subhierarchy of that
  cgroup. Let's rename the other subhierarchy test to under too. I
  think that'd be a lot less confusing going forward.

  [...]

  It's more intuitive and gives us the room to implement the real
  "in" test if ever necessary in the future.

Since this touches uapi bits, we need to change this as long as v4.8
is not yet officially released. Thus, change the helper enum and rename
related bits.

Fixes: 4a482f34af ("cgroup: bpf: Add bpf_skb_in_cgroup_proto")
Reference: http://patchwork.ozlabs.org/patch/658500/
Suggested-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
2016-08-12 21:53:33 -07:00
Sargun Dhillon
9e6e60ecbd samples/bpf: Add test_current_task_under_cgroup test
This test has a BPF program which writes the last known pid to call the
sync syscall within a given cgroup to a map.

The user mode program creates its own mount namespace, and mounts the
cgroupsv2  hierarchy in there, as on all current test systems
(Ubuntu 16.04, Debian), the cgroupsv2 vfs is unmounted by default.
Once it does this, it proceeds to test.

The test checks for positive and negative condition. It ensures that
when it's part of a given cgroup, its pid is captured in the map,
and that when it leaves the cgroup, this doesn't happen.

It populate a cgroups arraymap prior to execution in userspace. This means
that the program must be run in the same cgroups namespace as the programs
that are being traced.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12 21:49:42 -07:00
Anna, Suman
a138c88319 samples/rpmsg: add support for multiple instances
The current rpmsg_client_sample is a very simple example and
is not designed to handle multiple instances. Add support for
multiple instances, so that the same number of pings are sent
to each instance. The instances can be on one or multiple
remote processors.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-08-12 21:26:21 -07:00
Adam Barth
05b8ad25bc samples/bpf: fix bpf_perf_event_output prototype
The commit 555c8a8623 ("bpf: avoid stack copy and use skb ctx for event output")
started using 20 of initially reserved upper 32-bits of 'flags' argument
in bpf_perf_event_output(). Adjust corresponding prototype in samples/bpf/bpf_helpers.h

Signed-off-by: Adam Barth <arb@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10 23:12:31 -07:00
Alexei Starovoitov
ba0cc3c153 samples/bpf: add bpf_map_update_elem() tests
increase test coverage to check previously missing 'update when full'

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-06 20:49:19 -04:00
Huang Shijie
57c24b2140 samples/kretprobe: fix the wrong type
The regs_return_value() returns "unsigned long" or "long" value.  But the
retval is int type now, it may cause overflow, the log may becomes:

    [ 2911.078869] do_brk returned -2003877888 and took 4620 ns to execute

This patch converts the retval to "unsigned long" type, and fixes the
overflow issue.

Link: http://lkml.kernel.org/r/1464143083-3877-4-git-send-email-shijie.huang@arm.com
Signed-off-by: Huang Shijie <shijie.huang@arm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 08:50:07 -04:00
Huang Shijie
613413143f samples/kretprobe: convert the printk to pr_info/pr_err
We prefer to use the pr_* to print out the log now, this patch converts
the printk to pr_info.  In the error path, use the pr_err to replace the
printk.

Link: http://lkml.kernel.org/r/1464143083-3877-3-git-send-email-shijie.huang@arm.com
Signed-off-by: Huang Shijie <shijie.huang@arm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 08:50:07 -04:00
Huang Shijie
468b88956c samples/jprobe: convert the printk to pr_info/pr_err
We prefer to use the pr_* to print out the log now, this patch converts
the printk to pr_info.  In the error path, use the pr_err to replace the
printk.

Link: http://lkml.kernel.org/r/1464143083-3877-2-git-send-email-shijie.huang@arm.com
Signed-off-by: Huang Shijie <shijie.huang@arm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 08:50:07 -04:00
Huang Shijie
e708c1488b samples/kprobe: convert the printk to pr_info/pr_err
We prefer to use the pr_* to print out the log now, this patch converts
the printk to pr_info.  In the error path, use the pr_err to replace the
printk.

Link: http://lkml.kernel.org/r/1464143083-3877-1-git-send-email-shijie.huang@arm.com
Signed-off-by: Huang Shijie <shijie.huang@arm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 08:50:07 -04:00
Linus Torvalds
7a1e8b80fb Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
 "Highlights:

   - TPM core and driver updates/fixes
   - IPv6 security labeling (CALIPSO)
   - Lots of Apparmor fixes
   - Seccomp: remove 2-phase API, close hole where ptrace can change
     syscall #"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (156 commits)
  apparmor: fix SECURITY_APPARMOR_HASH_DEFAULT parameter handling
  tpm: Add TPM 2.0 support to the Nuvoton i2c driver (NPCT6xx family)
  tpm: Factor out common startup code
  tpm: use devm_add_action_or_reset
  tpm2_i2c_nuvoton: add irq validity check
  tpm: read burstcount from TPM_STS in one 32-bit transaction
  tpm: fix byte-order for the value read by tpm2_get_tpm_pt
  tpm_tis_core: convert max timeouts from msec to jiffies
  apparmor: fix arg_size computation for when setprocattr is null terminated
  apparmor: fix oops, validate buffer size in apparmor_setprocattr()
  apparmor: do not expose kernel stack
  apparmor: fix module parameters can be changed after policy is locked
  apparmor: fix oops in profile_unpack() when policy_db is not present
  apparmor: don't check for vmalloc_addr if kvzalloc() failed
  apparmor: add missing id bounds check on dfa verification
  apparmor: allow SYS_CAP_RESOURCE to be sufficient to prlimit another task
  apparmor: use list_next_entry instead of list_entry_next
  apparmor: fix refcount race when finding a child profile
  apparmor: fix ref count leak when profile sha1 hash is read
  apparmor: check that xindex is in trans_table bounds
  ...
2016-07-29 17:38:46 -07:00
Linus Torvalds
c624c86615 This is mostly clean ups and small fixes. Some of the more visible
changes are:
 
  . The function pid code uses the event pid filtering logic
  . [ku]probe events have access to current->comm
  . trace_printk now has sample code
  . PCI devices now trace physical addresses
  . stack tracing has less unnessary functions traced
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXl+d2AAoJEKKk/i67LK/83QEH/RDJ0mcfFVsuEeOnZZrZXABm
 4Rxk4FE5UAD+TSrVycwwzcbQab1iPK63mMdYvIBvaOiIC6/OJaEVM7jzZxnNGqmr
 pj0H8bxwOr58pe5pfnP92ow5qTLLzsXraWNl5sRXhSSHON7CXpGVzkErB58GmMYd
 8p6d9ziifQjo8X2O6XC9rGAvYLY5kEkVvyfuE1hI7muNTeOjyOT4EqpkNzxdBk+I
 QkGZGsk3Xhc8II9nu8FPWkaD26TatGJoZtZmVWHOzfsb3HNzG4RXla+WVOQ5u1HV
 noVyB1CJHhkO5CEBPdYIqwBWPQU4B9HfG4gVcUpDDVRxfzMpnEcKi1uwe+uDjfs=
 =XFcv
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "This is mostly clean ups and small fixes.  Some of the more visible
  changes are:

   - The function pid code uses the event pid filtering logic
   - [ku]probe events have access to current->comm
   - trace_printk now has sample code
   - PCI devices now trace physical addresses
   - stack tracing has less unnessary functions traced"

* tag 'trace-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  printk, tracing: Avoiding unneeded blank lines
  tracing: Use __get_str() when manipulating strings
  tracing, RAS: Cleanup on __get_str() usage
  tracing: Use outer () on __get_str() definition
  ftrace: Reduce size of function graph entries
  tracing: Have HIST_TRIGGERS select TRACING
  tracing: Using for_each_set_bit() to simplify trace_pid_write()
  ftrace: Move toplevel init out of ftrace_init_tracefs()
  tracing/function_graph: Fix filters for function_graph threshold
  tracing: Skip more functions when doing stack tracing of events
  tracing: Expose CPU physical addresses (resource values) for PCI devices
  tracing: Show the preempt count of when the event was called
  tracing: Add trace_printk sample code
  tracing: Choose static tp_printk buffer by explicit nesting count
  tracing: expose current->comm to [ku]probe events
  ftrace: Have set_ftrace_pid use the bitmap like events do
  tracing: Move pid_list write processing into its own function
  tracing: Move the pid_list seq_file functions to be global
  tracing: Move filtered_pid helper functions into trace.c
  tracing: Make the pid filtering helper functions global
2016-07-28 18:20:09 -07:00
Linus Torvalds
468fc7ed55 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Unified UDP encapsulation offload methods for drivers, from
    Alexander Duyck.

 2) Make DSA binding more sane, from Andrew Lunn.

 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli.

 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar.

 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX
    packets as soon as the device sees them, with the option to mirror
    the packet on TX via the same interface.  From Brenden Blanco and
    others.

 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet.

 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli.

 8) Simplify netlink conntrack entry layout, from Florian Westphal.

 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido
    Schimmel, Yotam Gigi, and Jiri Pirko.

10) Add SKB array infrastructure and convert tun and macvtap over to it.
    From Michael S Tsirkin and Jason Wang.

11) Support qdisc packet injection in pktgen, from John Fastabend.

12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy.

13) Add NV congestion control support to TCP, from Lawrence Brakmo.

14) Add GSO support to SCTP, from Marcelo Ricardo Leitner.

15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni.

16) Support MPLS over IPV4, from Simon Horman.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
  xgene: Fix build warning with ACPI disabled.
  be2net: perform temperature query in adapter regardless of its interface state
  l2tp: Correctly return -EBADF from pppol2tp_getname.
  net/mlx5_core/health: Remove deprecated create_singlethread_workqueue
  net: ipmr/ip6mr: update lastuse on entry change
  macsec: ensure rx_sa is set when validation is disabled
  tipc: dump monitor attributes
  tipc: add a function to get the bearer name
  tipc: get monitor threshold for the cluster
  tipc: make cluster size threshold for monitoring configurable
  tipc: introduce constants for tipc address validation
  net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update()
  MAINTAINERS: xgene: Add driver and documentation path
  Documentation: dtb: xgene: Add MDIO node
  dtb: xgene: Add MDIO node
  drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset
  drivers: net: xgene: Use exported functions
  drivers: net: xgene: Enable MDIO driver
  drivers: net: xgene: Add backward compatibility
  drivers: net: phy: xgene: Add MDIO driver
  ...
2016-07-27 12:03:20 -07:00
Linus Torvalds
e831101a73 arm64 updates for 4.8:
- Kexec support for arm64
 - Kprobes support
 - Expose MIDR_EL1 and REVIDR_EL1 CPU identification registers to sysfs
 - Trapping of user space cache maintenance operations and emulation in
   the kernel (CPU errata workaround)
 - Clean-up of the early page tables creation (kernel linear mapping, EFI
   run-time maps) to avoid splitting larger blocks (e.g. pmds) into
   smaller ones (e.g. ptes)
 - VDSO support for CLOCK_MONOTONIC_RAW in clock_gettime()
 - ARCH_HAS_KCOV enabled for arm64
 - Optimise IP checksum helpers
 - SWIOTLB optimisation to only allocate/initialise the buffer if the
   available RAM is beyond the 32-bit mask
 - Properly handle the "nosmp" command line argument
 - Fix for the initialisation of the CPU debug state during early boot
 - vdso-offsets.h build dependency workaround
 - Build fix when RANDOMIZE_BASE is enabled with MODULES off
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXmF/UAAoJEGvWsS0AyF7x+jwP/2fErtX6FTXmdG0c3HBkTpuy
 gEuzN2ByWbP6Io+unLC6NvbQQb1q6c73PTqjsoeMHUx2o8YK3jgWEBcC+7AuepoZ
 YGl3r08e75a/fGrgNwEQQC1lNlgjpog4kzVDh5ji6oRXNq+OkjJGUtRPe3gBoqxv
 NAjviciID/MegQaq4SaMd26AmnjuUGKogo5vlIaXK0SemX9it+ytW7eLAXuVY+gW
 EvO3Nxk0Y5oZKJF8qRw6oLSmw1bwn2dD26OgfXfCiI30QBookRyWIoXRedUOZmJq
 D0+Tipd7muO4PbjlxS8aY/wd/alfnM5+TJ6HpGDo+Y1BDauXfiXMf3ktDFE5QvJB
 KgtICmC0stWwbDT35dHvz8sETsrCMA2Q/IMrnyxG+nj9BxVQU7rbNrxfCXesJy7Q
 4EsQbcTyJwu+ECildBezfoei99XbFZyWk2vKSkTCFKzgwXpftGFaffgZ3DIzBAHH
 IjecDqIFENC8ymrjyAgrGjeFG+2WB/DBgoSS3Baiz6xwQqC4wFMnI3jPECtJjb/U
 6e13f+onXu5lF1YFKAiRjGmqa/G1ZMr+uKZFsembuGqsZdAPkzzUHyAE9g4JVO8p
 t3gc3/M3T7oLSHuw4xi1/Ow5VGb2UvbslFrp7OpuFZ7CJAvhKlHL5rPe385utsFE
 7++5WHXHAegeJCDNAKY2
 =iJOY
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - Kexec support for arm64

 - Kprobes support

 - Expose MIDR_EL1 and REVIDR_EL1 CPU identification registers to sysfs

 - Trapping of user space cache maintenance operations and emulation in
   the kernel (CPU errata workaround)

 - Clean-up of the early page tables creation (kernel linear mapping,
   EFI run-time maps) to avoid splitting larger blocks (e.g.  pmds) into
   smaller ones (e.g.  ptes)

 - VDSO support for CLOCK_MONOTONIC_RAW in clock_gettime()

 - ARCH_HAS_KCOV enabled for arm64

 - Optimise IP checksum helpers

 - SWIOTLB optimisation to only allocate/initialise the buffer if the
   available RAM is beyond the 32-bit mask

 - Properly handle the "nosmp" command line argument

 - Fix for the initialisation of the CPU debug state during early boot

 - vdso-offsets.h build dependency workaround

 - Build fix when RANDOMIZE_BASE is enabled with MODULES off

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits)
  arm64: arm: Fix-up the removal of the arm64 regs_query_register_name() prototype
  arm64: Only select ARM64_MODULE_PLTS if MODULES=y
  arm64: mm: run pgtable_page_ctor() on non-swapper translation table pages
  arm64: mm: make create_mapping_late() non-allocating
  arm64: Honor nosmp kernel command line option
  arm64: Fix incorrect per-cpu usage for boot CPU
  arm64: kprobes: Add KASAN instrumentation around stack accesses
  arm64: kprobes: Cleanup jprobe_return
  arm64: kprobes: Fix overflow when saving stack
  arm64: kprobes: WARN if attempting to step with PSTATE.D=1
  arm64: debug: remove unused local_dbg_{enable, disable} macros
  arm64: debug: remove redundant spsr manipulation
  arm64: debug: unmask PSTATE.D earlier
  arm64: localise Image objcopy flags
  arm64: ptrace: remove extra define for CPSR's E bit
  kprobes: Add arm64 case in kprobe example module
  arm64: Add kernel return probes support (kretprobes)
  arm64: Add trampoline code for kretprobes
  arm64: kprobes instruction simulation support
  arm64: Treat all entry code as non-kprobe-able
  ...
2016-07-27 11:16:05 -07:00
Sargun Dhillon
cf9b1199de samples/bpf: Add test/example of using bpf_probe_write_user bpf helper
This example shows using a kprobe to act as a dnat mechanism to divert
traffic for arbitrary endpoints. It rewrite the arguments to a syscall
while they're still in userspace, and before the syscall has a chance
to copy the argument into kernel space.

Although this is an example, it also acts as a test because the mapped
address is 255.255.255.255:555 -> real address, and that's not a legal
address to connect to. If the helper is broken, the example will fail
on the intermediate steps, as well as the final step to verify the
rewrite of userspace memory succeeded.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25 18:07:48 -07:00
Sargun Dhillon
96ae522795 bpf: Add bpf_probe_write_user BPF helper to be called in tracers
This allows user memory to be written to during the course of a kprobe.
It shouldn't be used to implement any kind of security mechanism
because of TOC-TOU attacks, but rather to debug, divert, and
manipulate execution of semi-cooperative processes.

Although it uses probe_kernel_write, we limit the address space
the probe can write into by checking the space with access_ok.
We do this as opposed to calling copy_to_user directly, in order
to avoid sleeping. In addition we ensure the threads's current fs
/ segment is USER_DS and the thread isn't exiting nor a kernel thread.

Given this feature is meant for experiments, and it has a risk of
crashing the system, and running programs, we print a warning on
when a proglet that attempts to use this helper is installed,
along with the pid and process name.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25 18:07:48 -07:00
Martin KaFai Lau
0f06a6787e samples: Add an IPv6 '-6' option to the pktgen scripts
Add a '-6' option to the sample pktgen scripts for sending out
IPv6 packets.

[root@kerneldev010.prn1 ~/pktgen]# ./pktgen_sample03_burst_single_flow.sh -i eth0 -s 64 -d fe80::f652:14ff:fec2:a14c -m f4:52:14:c2:a1:4c -b 32 -6

[root@kerneldev011.prn1 ~]# tcpdump -i eth0 -nn -c3 port 9
tcpdump: WARNING: eth0: no IPv4 address assigned
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
14:38:51.815297 IP6 fe80::f652:14ff:fec2:2ad2.9 > fe80::f652:14ff:fec2:a14c.9: UDP, length 16
14:38:51.815311 IP6 fe80::f652:14ff:fec2:2ad2.9 > fe80::f652:14ff:fec2:a14c.9: UDP, length 16
14:38:51.815313 IP6 fe80::f652:14ff:fec2:2ad2.9 > fe80::f652:14ff:fec2:a14c.9: UDP, length 16

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20 22:16:02 -07:00
Brenden Blanco
d9094bda5c bpf: make xdp sample variable names more meaningful
The naming choice of index is not terribly descriptive, and dropcnt is
in fact incorrect for xdp2. Pick better names for these: ipproto and
rxcnt.

Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-20 22:07:24 -07:00
Brenden Blanco
764cbccef8 bpf: add sample for xdp forwarding and rewrite
Add a sample that rewrites and forwards packets out on the same
interface. Observed single core forwarding performance of ~10Mpps.

Since the mlx4 driver under test recycles every single packet page, the
perf output shows almost exclusively just the ring management and bpf
program work. Slowdowns are likely occurring due to cache misses.

Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 21:46:33 -07:00
Brenden Blanco
86af8b4191 Add sample for adding simple drop program to link
Add a sample program that only drops packets at the BPF_PROG_TYPE_XDP_RX
hook of a link. With the drop-only program, observed single core rate is
~20Mpps.

Other tests were run, for instance without the dropcnt increment or
without reading from the packet header, the packet rate was mostly
unchanged.

$ perf record -a samples/bpf/xdp1 $(</sys/class/net/eth0/ifindex)
proto 17:   20403027 drops/s

./pktgen_sample03_burst_single_flow.sh -i $DEV -d $IP -m $MAC -t 4
Running... ctrl^C to stop
Device: eth4@0
Result: OK: 11791017(c11788327+d2689) usec, 59622913 (60byte,0frags)
  5056638pps 2427Mb/sec (2427186240bps) errors: 0
Device: eth4@1
Result: OK: 11791012(c11787906+d3106) usec, 60526944 (60byte,0frags)
  5133311pps 2463Mb/sec (2463989280bps) errors: 0
Device: eth4@2
Result: OK: 11791019(c11788249+d2769) usec, 59868091 (60byte,0frags)
  5077431pps 2437Mb/sec (2437166880bps) errors: 0
Device: eth4@3
Result: OK: 11795039(c11792403+d2636) usec, 59483181 (60byte,0frags)
  5043067pps 2420Mb/sec (2420672160bps) errors: 0

perf report --no-children:
 26.05%  ksoftirqd/0  [mlx4_en]         [k] mlx4_en_process_rx_cq
 17.84%  ksoftirqd/0  [mlx4_en]         [k] mlx4_en_alloc_frags
  5.52%  ksoftirqd/0  [mlx4_en]         [k] mlx4_en_free_frag
  4.90%  swapper      [kernel.vmlinux]  [k] poll_idle
  4.14%  ksoftirqd/0  [kernel.vmlinux]  [k] get_page_from_freelist
  2.78%  ksoftirqd/0  [kernel.vmlinux]  [k] __free_pages_ok
  2.57%  ksoftirqd/0  [kernel.vmlinux]  [k] bpf_map_lookup_elem
  2.51%  swapper      [mlx4_en]         [k] mlx4_en_process_rx_cq
  1.94%  ksoftirqd/0  [kernel.vmlinux]  [k] percpu_array_map_lookup_elem
  1.45%  swapper      [mlx4_en]         [k] mlx4_en_alloc_frags
  1.35%  ksoftirqd/0  [kernel.vmlinux]  [k] free_one_page
  1.33%  swapper      [kernel.vmlinux]  [k] intel_idle
  1.04%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c5c5
  0.96%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c58d
  0.93%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c6ee
  0.92%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c6b9
  0.89%  ksoftirqd/0  [kernel.vmlinux]  [k] __alloc_pages_nodemask
  0.83%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c686
  0.83%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c5d5
  0.78%  ksoftirqd/0  [mlx4_en]         [k] mlx4_alloc_pages.isra.23
  0.77%  ksoftirqd/0  [mlx4_en]         [k] 0x000000000001c5b4
  0.77%  ksoftirqd/0  [kernel.vmlinux]  [k] net_rx_action

machine specs:
 receiver - Intel E5-1630 v3 @ 3.70GHz
 sender - Intel E5645 @ 2.40GHz
 Mellanox ConnectX-3 @40G

Signed-off-by: Brenden Blanco <bblanco@plumgrid.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19 21:46:32 -07:00
Sandeepa Prabhu
af78cede8b kprobes: Add arm64 case in kprobe example module
Add info prints in sample kprobe handlers for ARM64

Signed-off-by: Sandeepa Prabhu <sandeepa.s.prabhu@gmail.com>
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-19 15:03:23 +01:00
Jesper Dangaard Brouer
d3c937bb4c pktgen: remove sample script pktgen.conf-1-1-rdos
Removing the pktgen sample script pktgen.conf-1-1-rdos, because
it does not contain anything that is not covered by the other and
newer style sample scripts.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14 15:19:51 -07:00
Jesper Dangaard Brouer
d25692e4b7 pktgen: add sample script pktgen_sample05_flow_per_thread.sh
This pktgen sample script is useful for scalability testing a
receiver.  The script will simply generate one flow per
thread (option -t N) using the thread number as part of the
source IP-address.

The single flow sample (pktgen_sample03_burst_single_flow.sh)
have become quite popular, but it is important that developers
also make sure to benchmark scalability of multiple receive
queues.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14 15:19:51 -07:00
Jesper Dangaard Brouer
15f2cbbde4 pktgen: add sample script pktgen_sample04_many_flows.sh
Adding a pktgen sample script that demonstrates how to use pktgen
for simulating flows.  Script will generate a certain number of
concurrent flows ($FLOWS) and each flow will contain $FLOWLEN
packets, which will be send back-to-back, before switching to a
new flow, due to flag FLOW_SEQ.

This script obsoletes the old sample script 'pktgen.conf-1-1-flows',
which is removed.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14 15:19:51 -07:00