The code to handle aggregating statuses didn't check that the status
actually got set to some non-None value.
Default the value to SUCCESS instead of adding a bunch of `is None`
checks.
This sorta follows the precedent in commit 3fc48259d5 ("kunit: Don't
fail test suites if one of them is empty").
Also slightly simplify the code and add type annotations.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The authors of this tool were more familiar with a different
type-checker, https://github.com/google/pytype.
That's open source, but mypy seems more prevalent (and runs faster).
And unlike pytype, mypy doesn't try to infer types so it doesn't check
unanotated functions.
So annotate ~all functions in kunit tool to increase type-checking
coverage.
Note: per https://www.python.org/dev/peps/pep-0484/, `__init__()` should
be annotated as `-> None`.
Doing so makes mypy discover a number of new violations.
Exclude main() since we reuse `request` for the different types of
requests, which mypy isn't happy about.
This commit fixes all but one error, where `TestSuite.status` might be
None.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Daniel Borkmann says:
====================
pull-request: bpf 2021-01-16
1) Fix a double bpf_prog_put() for BPF_PROG_{TYPE_EXT,TYPE_TRACING} types in
link creation's error path causing a refcount underflow, from Jiri Olsa.
2) Fix BTF validation errors for the case where kernel modules don't declare
any new types and end up with an empty BTF, from Andrii Nakryiko.
3) Fix BPF local storage helpers to first check their {task,inode} owners for
being NULL before access, from KP Singh.
4) Fix a memory leak in BPF setsockopt handling for the case where optlen is
zero and thus temporary optval buffer should be freed, from Stanislav Fomichev.
5) Fix a syzbot memory allocation splat in BPF_PROG_TEST_RUN infra for
raw_tracepoint caused by too big ctx_size_in, from Song Liu.
6) Fix LLVM code generation issues with verifier where PTR_TO_MEM{,_OR_NULL}
registers were spilled to stack but not recognized, from Gilad Reti.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
MAINTAINERS: Update my email address
selftests/bpf: Add verifier test for PTR_TO_MEM spill
bpf: Support PTR_TO_MEM{,_OR_NULL} register spilling
bpf: Reject too big ctx_size_in for raw_tp test run
libbpf: Allow loading empty BTFs
bpf: Allow empty module BTFs
bpf: Don't leak memory in bpf getsockopt when optlen == 0
bpf: Update local storage test to check handling of null ptrs
bpf: Fix typo in bpf_inode_storage.c
bpf: Local storage helpers should check nullness of owner ptr passed
bpf: Prevent double bpf_prog_put call from bpf_tracing_prog_attach
====================
Link: https://lore.kernel.org/r/20210116002025.15706-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull arm64 fixes from Catalin Marinas:
- Set the minimum GCC version to 5.1 for arm64 due to earlier compiler
bugs.
- Make atomic helpers __always_inline to avoid a section mismatch when
compiling with clang.
- Fix the CMA and crashkernel reservations to use ZONE_DMA (remove the
arm64_dma32_phys_limit variable, no longer needed with a dynamic
ZONE_DMA sizing in 5.11).
- Remove redundant IRQ flag tracing that was leaving lockdep
inconsistent with the hardware state.
- Revert perf events based hard lockup detector that was causing
smp_processor_id() to be called in preemptible context.
- Some trivial cleanups - spelling fix, renaming S_FRAME_SIZE to
PT_REGS_SIZE, function prototypes added.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: selftests: Fix spelling of 'Mismatch'
arm64: syscall: include prototype for EL0 SVC functions
compiler.h: Raise minimum version of GCC to 5.1 for arm64
arm64: make atomic helpers __always_inline
arm64: rename S_FRAME_SIZE to PT_REGS_SIZE
Revert "arm64: Enable perf events based hard lockup detector"
arm64: entry: remove redundant IRQ flag tracing
arm64: Remove arm64_dma32_phys_limit and its uses
The prog_test that's added depends on Clang/LLVM features added by
Yonghong in commit 286daafd6512 (was https://reviews.llvm.org/D72184).
Note the use of a define called ENABLE_ATOMICS_TESTS: this is used
to:
- Avoid breaking the build for people on old versions of Clang
- Avoid needing separate lists of test objects for no_alu32, where
atomics are not supported even if Clang has the feature.
The atomics_test.o BPF object is built unconditionally both for
test_progs and test_progs-no_alu32. For test_progs, if Clang supports
atomics, ENABLE_ATOMICS_TESTS is defined, so it includes the proper
test code. Otherwise, progs and global vars are defined anyway, as
stubs; this means that the skeleton user code still builds.
The atomics_test.o userspace object is built once and used for both
test_progs and test_progs-no_alu32. A variable called skip_tests is
defined in the BPF object's data section, which tells the userspace
object whether to skip the atomics test.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-11-jackmanb@google.com
A subsequent patch will add additional atomic operations. These new
operations will use the same opcode field as the existing XADD, with
the immediate discriminating different operations.
In preparation, rename the instruction mode BPF_ATOMIC and start
calling the zero immediate BPF_ADD.
This is possible (doesn't break existing valid BPF progs) because the
immediate field is currently reserved MBZ and BPF_ADD is zero.
All uses are removed from the tree but the BPF_XADD definition is
kept around to avoid breaking builds for people including kernel
headers.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Link: https://lore.kernel.org/bpf/20210114181751.768687-5-jackmanb@google.com
Add separate option to nettest to specify local address
binding in client mode.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new options to nettest to specify device binding and expected
device binding for server mode, and update fcnal-test script. This
is needed to allow a single instance of nettest running both server
and client modes to use different device bindings.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new option to nettest to specify MD5 password to use for client
side. Update fcnal-test script. This is needed for a single instance
running both server and client modes to test password mismatches.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nettest started with -r as the remote address for MD5 passwords.
The -m argument was added to use prefixes with a length when that
feature was added to the kernel. Since -r is used to specify
remote address for client mode, change nettest to only use -m
for MD5 passwords and update fcnal-test script.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a single instance of nettest is used for client and server
make sure address validation is only done for client mode.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few logging lines are missing the newline, or need it moved up for
cleaner logging.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a single instance of nettest is doing both client and
server modes, stdout and stderr messages can get interlaced
and become unreadable. Allocate a new set of buffers for the
child process handling server mode.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add option to nettest to run both client and server within a
single instance. Client forks a child process to run the server
code. A pipe is used for the server to tell the client it has
initialized and is ready or had an error. This avoid unnecessary
sleeps to handle such race when the commands are separately launched.
Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add options to specify server and client network namespace to
use before running respective functions.
Signed-off-by: Seth David Schoen <schoen@loyalty.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv6 addresses can have a device name to declare a scope (e.g.,
fe80::5054:ff:fe12:3456%eth0). The next patch adds support to
switch network namespace before running client or server code
(or both), so move the address validation to the server and
client functions.
IPv4 multicast groups do not have the device scope in the address
specification, so they can be validated inline with option parsing.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
convert_addr needs to be invoked in a different location. Move
the code up to avoid a forward declaration.
Code move only.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Later patch adds support for switching network namespaces before
running client, server or both. Device validations need to be
done after the network namespace switch, so add a helper to do it
and invoke in server and client code versus inline with argument
parsing. Move related argument checks as well.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull kselftest fixes from Shuah Khan:
"One single fix to skip BPF selftests by default.
BPF selftests have a hard dependency on cutting edge versions of tools
in the BPF ecosystem including LLVM.
Skipping BPF allows by default will make it easier for users
interested in running kselftest as a whole. Users can include BPF in
Kselftest build by via SKIP_TARGETS variable"
* tag 'linux-kselftest-fixes-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Skip BPF seftests by default
Pull networking fixes from Jakub Kicinski:
"We have a few fixes for long standing issues, in particular Eric's fix
to not underestimate the skb sizes, and my fix for brokenness of
register_netdevice() error path. They may uncover other bugs so we
will keep an eye on them. Also included are Willem's fixes for
kmap(_atomic).
Looking at the "current release" fixes, it seems we are about one rc
behind a normal cycle. We've previously seen an uptick of "people had
run their test suites" / "humans actually tried to use new features"
fixes between rc2 and rc3.
Summary:
Current release - regressions:
- fix feature enforcement to allow NETIF_F_HW_TLS_TX if IP_CSUM &&
IPV6_CSUM
- dcb: accept RTM_GETDCB messages carrying set-like DCB commands if
user is admin for backward-compatibility
- selftests/tls: fix selftests build after adding ChaCha20-Poly1305
Current release - always broken:
- ppp: fix refcount underflow on channel unbridge
- bnxt_en: clear DEFRAG flag in firmware message when retry flashing
- smc: fix out of bound access in the new netlink interface
Previous releases - regressions:
- fix use-after-free with UDP GRO by frags
- mptcp: better msk-level shutdown
- rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM
request
- i40e: xsk: fix potential NULL pointer dereferencing
Previous releases - always broken:
- skb frag: kmap_atomic fixes
- avoid 32 x truesize under-estimation for tiny skbs
- fix issues around register_netdevice() failures
- udp: prevent reuseport_select_sock from reading uninitialized socks
- dsa: unbind all switches from tree when DSA master unbinds
- dsa: clear devlink port type before unregistering slave netdevs
- can: isotp: isotp_getname(): fix kernel information leak
- mlxsw: core: Thermal control fixes
- ipv6: validate GSO SKB against MTU before finish IPv6 processing
- stmmac: use __napi_schedule() for PREEMPT_RT
- net: mvpp2: remove Pause and Asym_Pause support
Misc:
- remove from MAINTAINERS folks who had been inactive for >5yrs"
* tag 'net-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
mptcp: fix locking in mptcp_disconnect()
net: Allow NETIF_F_HW_TLS_TX if IP_CSUM && IPV6_CSUM
MAINTAINERS: dccp: move Gerrit Renker to CREDITS
MAINTAINERS: ipvs: move Wensong Zhang to CREDITS
MAINTAINERS: tls: move Aviad to CREDITS
MAINTAINERS: ena: remove Zorik Machulsky from reviewers
MAINTAINERS: vrf: move Shrijeet to CREDITS
MAINTAINERS: net: move Alexey Kuznetsov to CREDITS
MAINTAINERS: altx: move Jay Cliburn to CREDITS
net: avoid 32 x truesize under-estimation for tiny skbs
nt: usb: USB_RTL8153_ECM should not default to y
net: stmmac: fix taprio configuration when base_time is in the past
net: stmmac: fix taprio schedule configuration
net: tip: fix a couple kernel-doc markups
net: sit: unregister_netdevice on newlink's error path
net: stmmac: Fixed mtu channged by cache aligned
cxgb4/chtls: Fix tid stuck due to wrong update of qid
i40e: fix potential NULL pointer dereferencing
net: stmmac: use __napi_schedule() for PREEMPT_RT
can: mcp251xfd: mcp251xfd_handle_rxif_one(): fix wrong NULL pointer check
...
Add a test to check that the verifier is able to recognize spilling of
PTR_TO_MEM registers, by reserving a ringbuf buffer, forcing the spill
of a pointer holding the buffer address to the stack, filling it back
in from the stack and writing to the memory area pointed by it.
The patch was partially contributed by CyberArk Software, Inc.
Signed-off-by: Gilad Reti <gilad.reti@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20210113053810.13518-2-gilad.reti@gmail.com
During an out-of-tree build, attempting to install the $(TEST_FILES)
into the $(OUTPUT) directory fails, because the objects were already
generated into $(OUTPUT):
rsync: [sender] link_stat "tools/testing/selftests/bpf/test_lwt_ip_encap.o" failed: No such file or directory (2)
rsync: [sender] link_stat "tools/testing/selftests/bpf/test_tc_edt.o" failed: No such file or directory (2)
Use $(TEST_GEN_FILES) instead.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210113163319.1516382-4-jean-philippe@linaro.org
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Pass conntrack -f to specify family in netfilter conntrack helper
selftests, from Chen Yi.
2) Honor hashsize modparam from nf_conntrack_buckets sysctl,
from Jesper D. Brouer.
3) Fix memleak in nf_nat_init() error path, from Dinghao Liu.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nf_nat: Fix memleak in nf_nat_init
netfilter: conntrack: fix reading nf_conntrack_buckets
selftests: netfilter: Pass family parameter "-f" to conntrack tool
====================
Link: https://lore.kernel.org/r/20210112222033.9732-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If some of the subtests use module BTFs through ksyms, they will cause
bpf_prog to take a refcount on bpf_testmod module, which will prevent it from
successfully unloading. Module's refcnt is decremented when bpf_prog is freed,
which generally happens in RCU callback. So we need to trigger
syncronize_rcu() in the kernel, which can be achieved nicely with
membarrier(MEMBARRIER_CMD_SHARED) or membarrier(MEMBARRIER_CMD_GLOBAL) syscall.
So do that in kernel_sync_rcu() and make it available to other test inside the
test_progs. This synchronize_rcu() is called before attempting to unload
bpf_testmod.
Fixes: 9f7fa22589 ("selftests/bpf: Add bpf_testmod kernel module for testing")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20210112075520.4103414-5-andrii@kernel.org
RCU's rcutree.use_softirq=0 kernel boot parameter substitutes the per-CPU
rcuc kthreads for softirq, which is used in real-time installations.
However, none of the rcutorture scenarios test this parameter.
This commit therefore adds rcutree.use_softirq=0 to the RUDE01 and
TASKS01 rcutorture scenarios, both of which indirectly exercise RCU.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It was found in [1] that bpf_inode_storage_get helper did not check
the nullness of the passed owner ptr which caused an oops when
dereferenced. This change incorporates the example suggested in [1] into
the local storage selftest.
The test is updated to create a temporary directory instead of just
using a tempfile. In order to replicate the issue this copied rm binary
is renamed tiggering the inode_rename with a null pointer for the
new_inode. The logic to verify the setting and deletion of the inode
local storage of the old inode is also moved to this LSM hook.
The change also removes the copy_rm function and simply shells out
to copy files and recursively delete directories and consolidates the
logic of setting the initial inode storage to the bprm_committed_creds
hook and removes the file_open hook.
[1]: https://lore.kernel.org/bpf/CANaYP3HWkH91SN=wTNO9FL_2ztHfqcXKX38SSE-JJ2voh+vssw@mail.gmail.com
Suggested-by: Gilad Reti <gilad.reti@gmail.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210112075525.256820-2-kpsingh@kernel.org
Fix nft_conntrack_helper.sh false fail report:
1) Conntrack tool need "-f ipv6" parameter to show out ipv6 traffic items.
2) Sleep 1 second after background nc send packet, to make sure check
is after this statement executed.
False report:
FAIL: ns1-lkjUemYw did not show attached helper ip set via ruleset
PASS: ns1-lkjUemYw connection on port 2121 has ftp helper attached
...
After fix:
PASS: ns1-2hUniwU2 connection on port 2121 has ftp helper attached
PASS: ns2-2hUniwU2 connection on port 2121 has ftp helper attached
...
Fixes: 619ae8e069 ("selftests: netfilter: add test case for conntrack helper assignment")
Signed-off-by: Chen Yi <yiche@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch added the MP_PRIO testcases:
Add a new argument bkup for run_tests and do_transfer, it can be set as
"backup" or "nobackup", the default value is "".
Add a new function chk_prio_nr to check the MP_PRIO related MIB counters.
The output looks like this:
29 single subflow, backup syn[ ok ] - synack[ ok ] - ack[ ok ]
ptx[ ok ] - prx [ ok ]
30 single address, backup syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
ptx[ ok ] - prx [ ok ]
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added the set_flags command in pm_nl_ctl, currently we can only
set two flags: backup and nobackup. The set_flags command can be used like
this:
# pm_nl_ctl set 10.0.0.1 flags backup
# pm_nl_ctl set 10.0.0.1 flags nobackup
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the address ID can be set from user-space, some of the tests in
pm_netlink.sh will fail. This patch fixed the failures, and add the
testcases for setting the address ID.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull kunit fixes from Shuah Khan:
"One fix to force the use of the 'tty' console for UML.
Given that kunit tool requires the console output, explicitly stating
the dependency makes sense than relying on it being the default"
* tag 'linux-kselftest-kunit-fixes-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Force the use of the 'tty' console for UML
Pull kselftest fixes from Shuah Khan:
"Two minor fixes to vDSO test changes in this merge window"
* tag 'linux-kselftest-next-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/vDSO: fix -Wformat warning in vdso_test_correctness
selftests/vDSO: add additional binaries to .gitignore
Pull kvm fixes from Paolo Bonzini:
"x86:
- Fixes for the new scalable MMU
- Fixes for migration of nested hypervisors on AMD
- Fix for clang integrated assembler
- Fix for left shift by 64 (UBSAN)
- Small cleanups
- Straggler SEV-ES patch
ARM:
- VM init cleanups
- PSCI relay cleanups
- Kill CONFIG_KVM_ARM_PMU
- Fixup __init annotations
- Fixup reg_to_encoding()
- Fix spurious PMCR_EL0 access
Misc:
- selftests cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (38 commits)
KVM: x86: __kvm_vcpu_halt can be static
KVM: SVM: Add support for booting APs in an SEV-ES guest
KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit
KVM: nSVM: mark vmcb as dirty when forcingly leaving the guest mode
KVM: nSVM: correctly restore nested_run_pending on migration
KVM: x86/mmu: Clarify TDP MMU page list invariants
KVM: x86/mmu: Ensure TDP MMU roots are freed after yield
kvm: check tlbs_dirty directly
KVM: x86: change in pv_eoi_get_pending() to make code more readable
MAINTAINERS: Really update email address for Sean Christopherson
KVM: x86: fix shift out of bounds reported by UBSAN
KVM: selftests: Implement perf_test_util more conventionally
KVM: selftests: Use vm_create_with_vcpus in create_vm
KVM: selftests: Factor out guest mode code
KVM/SVM: Remove leftover __svm_vcpu_run prototype from svm.c
KVM: SVM: Add register operand to vmsave call in sev_es_vcpu_load
KVM: x86/mmu: Optimize not-present/MMIO SPTE check in get_mmio_spte()
KVM: x86/mmu: Use raw level to index into MMIO walks' sptes array
KVM: x86/mmu: Get root level from walkers when retrieving MMIO SPTE
KVM: x86/mmu: Use -1 to flag an undefined spte in get_mmio_spte()
...
For IPv6 traffic, mausezahn needs to be invoked with '-6'. Otherwise an
error is returned:
# ip netns exec me mausezahn veth1 -B 2001:db8:101::2 -A 2001:db8:91::1 -c 0 -t tcp "dp=1-1023, flags=syn"
Failed to set source IPv4 address. Please check if source is set to a valid IPv4 address.
Invalid command line parameters!
Fixes: 7c741868ce ("selftests: Add torture tests to nexthop tests")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf 2021-01-07
We've added 4 non-merge commits during the last 10 day(s) which contain
a total of 4 files changed, 14 insertions(+), 7 deletions(-).
The main changes are:
1) Fix task_iter bug caused by the merge conflict resolution, from Yonghong.
2) Fix resolve_btfids for multiple type hierarchies, from Jiri.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpftool: Fix compilation failure for net.o with older glibc
tools/resolve_btfids: Warn when having multiple IDs for single type
bpf: Fix a task_iter bug caused by a merge conflict resolution
selftests/bpf: Fix a compile error for BPF_F_BPRM_SECUREEXEC
====================
Link: https://lore.kernel.org/r/20210107221555.64959-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
