Linux doesn't generate these, but it's perfectly valid according to
a close reading of the spec. I opened virtio spec bug VIRTIO-134 to
make this clearer there, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a demonstration, the lguest launcher is pretty strict, trying to
catch badly behaved drivers. Document this precisely.
A good implementation would *NOT* crash the guest when these happened!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are some (optional) parts we don't implement, but this quotes all
the device requirements from the spec (csd 03, but it should be the same
across all released versions).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The next patch will insert many quotes from the virtio 1.0 spec; they
make most sense if we copy the spec.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The example launcher doesn't reset the queue_enable like the spec says
we have to. Plus, we should reset the size in case they negotiated
a different (smaller) one.
This is easy to test by unloading and reloading a virtio module.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The VIRTIO_PCI_CAP_PCI_CFG in the PCI virtio 1.0 spec allows access to
the BAR registers without mapping them. This is a compulsory feature,
and we implement it here.
There are some subtleties involving access widths which we should
note:
4.1.4.7.1 Device Requirements: PCI configuration access capability
...
Upon detecting driver write access to pci_cfg_data, the device MUST
execute a write access at offset cap.offset at BAR selected by
cap.bar using the first cap.length bytes from pci_cfg_data.
Upon detecting driver read access to pci_cfg_data, the device MUST
execute a read access of length cap.length at offset cap.offset at
BAR selected by cap.bar and store the first cap.length bytes in
pci_cfg_data.
So, for a write, we copy into the pci_cfg_data window, then write from
there out to the BAR. This works correctly if cap.length != width of
write. Similarly, for a read, we read into window from the BAR then
read the value from there.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a magic register which causes a character to be outputted: it can
be used even before the device is configured.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The only real change here (other than using the PCI bus) is that we
didn't negotiate VIRTIO_NET_F_MRG_RXBUF before, so the format of the
packet header changed with virtio 1.0; we need TUNSETVNETHDRSZ on the
tun fd to tell it about the extra two bytes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We remove SCSI support (which was removed for 1.0) and VIRTIO_BLK_F_FLUSH
feature flag (removed too, since it's compulsory for 1.0).
The rest is mainly mechanical.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want to use the local kernel headers, but -I../../include/uapi leads us into
a world of hurt. Instead we create a dummy include/ dir with symlinks.
If we just use #include "../../include/uapi/linux/virtio_blk.h" we get:
../../include/uapi/linux/virtio_blk.h:31:32: fatal error: linux/virtio_types.h: No such file or directory
#include <linux/virtio_types.h>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For each device, We need to include the vendor capabilities to demark
where virtio common, notification and ISR regions are (we put them
all in BAR0).
We need to handle the switching of the virtqueues using the accessors.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This handles ioport 0xCF8 and 0xCFC accesses, which are used to
read/write PCI device config space.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't do anything with them yet (emulate_mmio_write and
emulate_mmio_read are stubs), but we decode the instructions and
search for the device they're hitting.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is where we point our PCI BARs, so that we can intercept MMIO
accesses. We tell the kernel about it so any faults in this area are
directed to us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
While hacking on getting I/O out to the lguest launcher, I noticed
that returning 0xFF for the PS/2 keyboard status made it spin for a
while thinking there was a key pending. Fix this by returning 1
instead of 0xFF.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We copy 7 bytes at eip for userspace's instruction decode; we have to
carefully handle the case where eip is at the end of a page. We can't
leave this to userspace since kernel has all the page table decode
logic.
The decode logic moves to userspace, basically unchanged.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
dwfl_report_offline() works only when libraries are prelinked.
Replace dwfl_report_offline() with dwfl_report_elf() so we correctly
extract debug info even from libraries that are not prelinked.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20150114221045.GA17703@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the symbol structure is allocated with symbol_conf.priv_size
to carry sideband information like annotation, map browser on TUI and
sort-by-name tree node. So retrieving these information from symbol
needs to care about the details of such placement.
However the annotation code just assumes that the symbol is placed after
the struct annotation. But actually there's other info between them.
So accessing those struct will lead to an undefined behavior (usually a
crash) after they write their info to the same location.
To reproduce the problem, please follow the steps below:
1. run perf report (TUI of course) with -v option
2. open map browser (by pressing right arrow key for any entry)
3. search any function (by pressing '/' key and input whatever..)
4. return to the hist browser (by pressing 'q' or left arrow key)
5. open annotation window for the same entry (by pressing 'a' key)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1421234288-22758-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf tool fails to unwind user stack if the event raises in a shared
object. This patch improves tests/dwarf-unwind.c to demonstrate the
problem by utilizing commonly used glibc function "bsearch". If perf is
not statically linked, the testcase will try to unwind a mixed call
trace.
By debugging libunwind I found that there is a bug in unwind-libunwind:
it always passes 0 as segbase to libunwind, cause libunwind unable to
locate debug_frame entry fir first level ip address (I add some more
debugging output into libunwind to make things clear):
>_Uarm_dwarf_find_debug_frame: start_ip = 10be98, end_ip = 10c2a4
>_Uarm_dwarf_find_debug_frame: found debug_frame table `/lib/libc-2.18.so': segbase=0x0, len=7, gp=0x0, table_data=0x449388
>_Uarm_dwarf_search_unwind_table: call lookup:ip = b6cd3bcc, segbase = 0, rel_ip = b6cd3bcc
>lookup: e->start_ip_offset = bcf18 (rel_ip = b6cd3bcc)
>lookup: e->start_ip_offset = 6d314 (rel_ip = b6cd3bcc)
>lookup: e->start_ip_offset = 33d0c (rel_ip = b6cd3bcc)
...
>lookup: e->start_ip_offset = 15d0c (rel_ip = b6cd3bcc)
>lookup: e->start_ip_offset = 15c40 (rel_ip = b6cd3bcc)
>_Uarm_dwarf_search_unwind_table: IP b6cd3bcc inside range b6c12000-b6d4c000, but no explicit unwind info found
>put_rs_cache: unmasking signals/interrupts and releasing lock
>_Uarm_dwarf_step: returning -10
>_Uarm_step: dwarf_step()=-10
This patch passes map->start as segbase to dwarf_find_debug_frame(), so
di will be initialized correctly.
In addition, dso and executable are different when setting segbase. This
patch first check whether the elf is executable, and pass segbase only
for shared object.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1421203007-75799-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is due to duplicated unistd inclusion (via uClibc headers + kernel headers)
Also seen on ARM uClibc based tools
------- ARC build ---------->8-------------
CC util/evlist.o
In file included from
~/arc/k.org/arch/arc/include/uapi/asm/unistd.h:25:0,
from util/../perf-sys.h:10,
from util/../perf.h:15,
from util/event.h:7,
from util/event.c:3:
~/arc/k.org/include/uapi/asm-generic/unistd.h:906:0:
warning: "__NR_fcntl64" redefined [enabled by default]
#define __NR_fcntl64 __NR3264_fcntl
^
In file included from
~/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/sys/syscall.h:24:0,
from util/../perf-sys.h:6,
----------------->8-------------------
------- ARM build ---------->8-------------
CC FPIC plugin_scsi.o
In file included from util/../perf-sys.h:9:0,
from util/../perf.h:15,
from util/cache.h:7,
from perf.c:12:
~/arc/k.org/arch/arm/include/uapi/asm/unistd.h:28:0:
warning: "__NR_restart_syscall" redefined [enabled by default]
In file included from
~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/sys/syscall.h:25:0,
from util/../perf-sys.h:6,
from util/../perf.h:15,
from util/cache.h:7,
from perf.c:12:
~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/bits/sysnum.h:17:0:
note: this is the location of the previous definition
----------------->8-------------------
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421156604-30603-4-git-send-email-vgupta@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
----------------->8------------------
CC bench/sched-pipe.o
In file included from builtin-annotate.c:13:0:
util/cache.h:76:15: warning: redundant redeclaration of 'strlcpy'
[-Wredundant-decls]
extern size_t strlcpy(char *dest, const char *src, size_t size);
^
In file included from util/util.h:55:0,
from builtin.h:4,
from builtin-annotate.c:8:
~/vineetg/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/string.h:396:15:
note: previous declaration of 'strlcpy' was here
extern size_t strlcpy(char *__restrict dst, const char *__restrict src,
----------------->8------------------
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421156604-30603-3-git-send-email-vgupta@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ARC Linux uses the no legacy syscalls abi and corresponding uClibc headers
statfs defines f_type to be U32 which causes perf build breakage
http://git.uclibc.org/uClibc/tree/libc/sysdeps/linux/common-generic/bits/statfs.h
----------->8---------------
CC fs/fs.o
fs/fs.c: In function 'fs__valid_mount':
fs/fs.c:82:24: error: comparison between signed and unsigned integer
expressions [-Werror=sign-compare]
else if (st_fs.f_type != magic)
^
cc1: all warnings being treated as errors
----------->8---------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Cody P Schafer <dev@codyps.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Link: http://lkml.kernel.org/r/1420888254-17504-2-git-send-email-vgupta@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to use lib/hweight.c for that, just like we do for lib/rbtree.c,
so tools need to link hweight.o. For now do it directly, but we need to
have a tools/lib/lk.a or .so that collects these goodies...
Reported-by: Jan Beulich <JBeulich@suse.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-a1e91dx3apzqw5kbdt7ut21s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When thread__init_map_groups() fails, a new thread should be removed
from the rbtree since it's gonna be freed. Also update last match cache
only if the function succeeded.
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420763892-15535-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When build with 'make ARCH=x86' and dwarf unwind is on, there is a
compiling error:
CC /home/wn/perf/arch/x86/util/unwind-libdw.o
CC /home/wn/perf/arch/x86/tests/regs_load.o
arch/x86/tests/regs_load.S: Assembler messages:
arch/x86/tests/regs_load.S:65: Error: operand type mismatch for `push'
arch/x86/tests/regs_load.S:72: Error: operand type mismatch for `pop'
make[1]: *** [/home/wn/perf/arch/x86/tests/regs_load.o] Error 1
make[1]: INTERNAL: Exiting with 25 jobserver tokens available; should be 24!
make: *** [all] Error 2
...
Which is caused by incorrectly undefine macro HAVE_ARCH_X86_64_SUPPORT.
'config/Makefile.arch' tests __x86_64__ only when 'ARCH=x86_64'.
However, when building x86_64 kernel, ARCH=x86 is valid and commonly
used. Build systems, such as yocto, uses x86_64 compiler with 'ARCH=x86'
to build x86_64 perf, which causes mismatching.
As __LP64__ is defined for x86_64 as well, we can consolidate the
__x86_64__ check to the __LP64__ check and get rid of the IS_X86_64
IMHO.
(This patch is made by Namhyung Kim when replying my v1 patch:
https://lkml.org/lkml/2015/1/7/17
I modified the code to remove dependency on RAW_ARCH:
https://lkml.org/lkml/2015/1/7/865
Namhyung Kim didn't provide his SOB in his original email. I add
mine only for my modification.)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1421029255-23039-1-git-send-email-wangnan0@huawei.com
[ Namhyung provided his S-o-B on a followup to this patch thread on lkml ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When it failed to write probe commands to the probe_event file in
debugfs, it needs to propagate the error code properly. Current code
blindly uses the return value of the write(2) so it always uses
-1 (-EPERM) and it might confuse users.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420886028-15135-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This update contains 3 patches to fix one compile error,
and two run-time bugs. One of them fixes infinite loop
on ARM.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nVlg
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-3.19-rc-5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This update contains three patches to fix one compile error, and two
run-time bugs. One of them fixes infinite loop on ARM"
* tag 'linux-kselftest-3.19-rc-5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/vm: fix link error for transhuge-stress test
tools: testing: selftests: mq_perf_tests: Fix infinite loop on ARM
selftests/exec: allow shell return code of 126
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also some kernel side fixes: uncore PMU
driver fix, user regs sampling fix and an instruction decoder fix that
unbreaks PEBS precise sampling"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes
perf/x86_64: Improve user regs sampling
perf: Move task_pt_regs sampling into arch code
x86: Fix off-by-one in instruction decoder
perf hists browser: Fix segfault when showing callchain
perf callchain: Free callchains when hist entries are deleted
perf hists: Fix children sort key behavior
perf diff: Fix to sort by baseline field by default
perf list: Fix --raw-dump option
perf probe: Fix crash in dwarf_getcfi_elf
perf probe: Fix to fall back to find probe point in symbols
perf callchain: Append callchains only when requested
perf ui/tui: Print backtrace symbols when segfault occurs
perf report: Show progress bar for output resorting
add -lrt to fix undefined reference to `clock_gettime'
error seen when the test is compiled using gcc 4.6.4.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
When perf report on TUI shows callchain it checks first node has
siblings to determine whether it needs to print percentage value.
But it missed a case that first node is NULL. So sometimes it segfaults
like below:
$ perf top -g
perf: Segmentation fault
-------- backtrace --------
perf[0x4fcefb]
/usr/lib/libc.so.6(+0x33b20)[0x7f2a35839b20]
perf(rb_next+0x8)[0x47d3d8]
perf[0x4f6058]
perf[0x4f833b]
perf[0x4f8610]
perf[0x4f209e]
perf(ui_browser__run+0x3a)[0x4f2e6a]
perf[0x4f94ee]
perf(perf_evlist__tui_browse_hists+0x94)[0x4fbbf4]
perf[0x444d10]
/usr/lib/libpthread.so.0(+0x7314)[0x7f2a37070314]
/usr/lib/libc.so.6(clone+0x6d)[0x7f2a358ee5bd]
$ addr2line -e `which perf` 0x4f6058
/home/namhyung/project/linux/tools/perf/ui/browsers/hists.c:553
I don't know why the backtrace didn't print some symbols..
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 4087d11cd9 ("perf hists browser: Print overhead percent value for first-level callchain")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1419401076-21700-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Markus reported that "perf top -g" can leak ~300MB per second on his
machine. This is partly because it missed to free callchains when hist
entries are deleted. Fix it.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20141230053813.GD6081@sejong
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf report --children resorts output fields, it tries to put
caller above the callee. But this was only meaningful for a same thread
and doing this requires callchain enabled. So fix its check before
comparing the callchain depth.
This also changes the hist accumulation tests: In test 3, xmalloc in
bash thread should be above than other perf threads due to alphabetical
order of comm string. Also it's under page_fault in bash thread since
alphabetical order of dso name. The sys_perf_event_open in perf thread
is put on the last line since it's self overhead is 0.
In test 4, the sys_perf_event_open is put above other perf entries that
have same children overhead since its callchain depth is smaller.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1419309381-2593-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can't use a char type to check for a negative return value since char
isn't guaranteed to be signed. Indeed, the char type tends to be unsigned on
ARM.
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
When the shell fails to invoke a script because its path name
is too long (ENAMETOOLONG), most shells return 127 to indicate
command not found. However, some systems report 126 (which POSIX
suggests should indicate a non-executable file) for this case,
so allow that too.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Drysdale <drysdale@google.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
David reported that perf can segfault when adding an uprobe event like
this:
$ perf probe -x /lib64/libc-2.14.90.so -a 'malloc size=%di'
(gdb) bt
#0 parse_eh_frame_hdr (hdr=0x0, hdr_size=2596, hdr_vaddr=71788,
ehdr=0x7fffffffd390, eh_frame_vaddr=
0x7fffffffd378, table_entries=0x8808d8, table_encoding=0x8808e0 "") at
dwarf_getcfi_elf.c:79
#1 0x000000385f81615a in getcfi_scn_eh_frame (hdr_vaddr=71788,
hdr_scn=0x8839b0, shdr=0x7fffffffd2f0, scn=<optimized out>,
ehdr=0x7fffffffd390, elf=0x882b30) at dwarf_getcfi_elf.c:231
#2 getcfi_shdr (ehdr=0x7fffffffd390, elf=0x882b30) at dwarf_getcfi_elf.c:283
#3 dwarf_getcfi_elf (elf=0x882b30) at dwarf_getcfi_elf.c:309
#4 0x00000000004d5bac in debuginfo__find_probes (pf=0x7fffffffd4f0,
dbg=Unhandled dwarf expression opcode 0xfa) at util/probe-finder.c:993
#5 0x00000000004d634a in debuginfo__find_trace_events (dbg=0x880840,
pev=<optimized out>, tevs=0x880f88, max_tevs=<optimized out>) at
util/probe-finder.c:1200
#6 0x00000000004aed6b in try_to_find_probe_trace_events (target=0x881b20
"/lib64/libpthread-2.14.90.so",
max_tevs=128, tevs=0x880f88, pev=0x859b30) at util/probe-event.c:482
#7 convert_to_probe_trace_events (target=0x881b20
"/lib64/libpthread-2.14.90.so", max_tevs=128, tevs=0x880f88,
pev=0x859b30) at util/probe-event.c:2356
#8 add_perf_probe_events (pevs=<optimized out>, npevs=1, max_tevs=128,
target=0x881b20 "/lib64/libpthread-2.14.90.so", force_add=false) at
util/probe-event.c:2391
#9 0x000000000044014f in __cmd_probe (argc=<optimized out>,
argv=0x7fffffffe2f0, prefix=Unhandled dwarf expression opcode 0xfa) at
at builtin-probe.c:488
#10 0x0000000000440313 in cmd_probe (argc=5, argv=0x7fffffffe2f0,
prefix=<optimized out>) at builtin-probe.c:506
#11 0x000000000041d133 in run_builtin (p=0x805680, argc=5,
argv=0x7fffffffe2f0) at perf.c:341
#12 0x000000000041c8b2 in handle_internal_command (argv=<optimized out>,
argc=<optimized out>) at perf.c:400
#13 run_argv (argv=<optimized out>, argcp=<optimized out>) at perf.c:444
#14 main (argc=5, argv=0x7fffffffe2f0) at perf.c:559
And I found a related commit (5704c8c4fa71 "getcfi_scn_eh_frame: Don't
crash and burn when .eh_frame bits aren't there.") in elfutils that can
lead to a unexpected crash like this. To safely use the function, it
needs to check the .eh_frame section is a PROGBITS type.
Reported-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20141230090533.GH6081@sejong
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to fall back to find a probe point in symbols if perf fails to find
it in debuginfo.
This can happen when the target function is an alias of another
function. Such alias doesn't have an entry in debuginfo but in symbols.
David Ahern reported this problem in https://lkml.org/lkml/2014/12/29/355
I ensured the problem and deeper investigation discovers it.
-----
eu-readelf --debug-dump=info /usr/lib/debug/lib/x86_64-linux-gnu/libc-2.19.so | grep \"malloc\" -A6
name (strp) "malloc"
decl_file (data1) 25
decl_line (data2) 466
prototyped (flag_present)
type (ref4) [ 81b5]
declaration (flag_present)
[ 8f58] formal_parameter
--
name (strp) "malloc"
decl_file (data1) 23
decl_line (data2) 466
prototyped (flag_present)
type (ref4) [ 9f4a]
declaration (flag_present)
sibling (ref4) [ bb29]
...
-----
All these entires have no instances (all of them are declarations)
This is why the perf probe failed to find it in debuginfo.
However, there are some malloc instances in symbols.
-----
eu-readelf --symbols /usr/lib/debug/lib/x86_64-linux-gnu/libc-2.19.so | grep malloc$
1181: 0000000000080700 5332 FUNC LOCAL DEFAULT 12 _int_malloc
4537: 00000000000831d0 339 FUNC LOCAL DEFAULT 12 __GI___libc_malloc
5545: 00000000000831d0 339 FUNC LOCAL DEFAULT 12 __malloc
6063: 00000000000831d0 339 FUNC GLOBAL DEFAULT 12 malloc
7302: 00000000000831d0 339 FUNC GLOBAL DEFAULT 12 __libc_malloc
-----
As you an see, malloc and __libc_malloc have same address, and actually
__libc_malloc has an entry in debuginfo. So you can set up a probe on
__libc_malloc.
To fix this problem shortly, perf probe simply falls back to find probe
point(malloc) in symbols if it is not found in debuginfo.
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20141231062747.2087.80961.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
