Fix compilation warnings due to __u64 defined differently as `unsigned long`
or `unsigned long long` on different architectures (e.g., ppc64le differs from
x86-64). Also cast one argument to size_t to fix printf warning of similar
nature.
Fixes: eacaaed784 ("libbpf: Implement enum value-based CO-RE relocations")
Fixes: 50e09460d9 ("libbpf: Skip well-known ELF sections when iterating ELF")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200827041109.3613090-1-andriin@fb.com
There are code paths where EINVAL is returned directly without setting
errno. In that case, errno could be 0, which would mask the
failure. For example, if a careless programmer set log_level to 10000
out of laziness, they would have to spend a long time trying to figure
out why.
Fixes: 4f33ddb4e3 ("libbpf: Propagate EPERM to caller on program load")
Signed-off-by: Alex Gartrell <alexgartrell@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200826075549.1858580-1-alexgartrell@gmail.com
Similar to bpf_local_storage for sockets, add local storage for inodes.
The life-cycle of storage is managed with the life-cycle of the inode.
i.e. the storage is destroyed along with the owning inode.
The BPF LSM allocates an __rcu pointer to the bpf_local_storage in the
security blob which are now stackable and can co-exist with other LSMs.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-6-kpsingh@chromium.org
Fix copy-paste error in types compatibility check. Local type is accidentally
used instead of target type for the very first type check strictness check.
This can result in potentially less strict candidate comparison. Fix the
error.
Fixes: 3fc32f40c4 ("libbpf: Implement type-based CO-RE relocations support")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200821225653.2180782-1-andriin@fb.com
Make libbpf logs follow similar pattern and provide more context like section
name or program name, where appropriate. Also, add BPF_INSN_SZ constant and
use it throughout to clean up code a little bit. This commit doesn't have any
functional changes and just removes some code changes out of the way before
bigger refactoring in libbpf internals.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820231250.1293069-6-andriin@fb.com
Skip and don't log ELF sections that libbpf knows about and ignores during ELF
processing. This allows to not unnecessarily log details about those ELF
sections and cleans up libbpf debug log. Ignored sections include DWARF data,
string table, empty .text section and few special (e.g., .llvm_addrsig)
useless sections.
With such ELF sections out of the way, log unrecognized ELF sections at
pr_info level to increase visibility.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820231250.1293069-5-andriin@fb.com
__noinline is pretty frequently used, especially with BPF subprograms, so add
them along the __always_inline, for user convenience and completeness.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820231250.1293069-4-andriin@fb.com
Factor out common ELF operations done throughout the libbpf. This simplifies
usage across multiple places in libbpf, as well as hide error reporting from
higher-level functions and make error logging more consistent.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820231250.1293069-3-andriin@fb.com
Add a set of APIs to perf_buffer manage to allow applications to integrate
perf buffer polling into existing epoll-based infrastructure. One example is
applications using libevent already and wanting to plug perf_buffer polling,
instead of relying on perf_buffer__poll() and waste an extra thread to do it.
But perf_buffer is still extremely useful to set up and consume perf buffer
rings even for such use cases.
So to accomodate such new use cases, add three new APIs:
- perf_buffer__buffer_cnt() returns number of per-CPU buffers maintained by
given instance of perf_buffer manager;
- perf_buffer__buffer_fd() returns FD of perf_event corresponding to
a specified per-CPU buffer; this FD is then polled independently;
- perf_buffer__consume_buffer() consumes data from single per-CPU buffer,
identified by its slot index.
To support a simpler, but less efficient, way to integrate perf_buffer into
external polling logic, also expose underlying epoll FD through
perf_buffer__epoll_fd() API. It will need to be followed by
perf_buffer__poll(), wasting extra syscall, or perf_buffer__consume(), wasting
CPU to iterate buffers with no data. But could be simpler and more convenient
for some cases.
These APIs allow for great flexiblity, but do not sacrifice general usability
of perf_buffer.
Also exercise and check new APIs in perf_buffer selftest.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20200821165927.849538-1-andriin@fb.com
GCC compilers older than version 5 don't support __builtin_mul_overflow yet.
Given GCC 4.9 is the minimal supported compiler for building kernel and the
fact that libbpf is a dependency of resolve_btfids, which is dependency of
CONFIG_DEBUG_INFO_BTF=y, this needs to be handled. This patch fixes the issue
by falling back to slower detection of integer overflow in such cases.
Fixes: 029258d7b2 ("libbpf: Remove any use of reallocarray() in libbpf")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200820061411.1755905-2-andriin@fb.com
BPF_CALL | BPF_JMP32 is explicitly not allowed by verifier for BPF helper
calls, so don't detect it as a valid call. Also drop the check on func_id
pointer, as it's currently always non-null.
Fixes: 109cea5a59 ("libbpf: Sanitize BPF program code for bpf_probe_read_{kernel, user}[_str]")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200820061411.1755905-1-andriin@fb.com
The error message emitted by bpf_object__init_user_btf_maps() was using the
wrong section ID.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200819110534.9058-1-toke@redhat.com
Add kernel module with user mode driver that populates bpffs with
BPF iterators.
$ mount bpffs /my/bpffs/ -t bpf
$ ls -la /my/bpffs/
total 4
drwxrwxrwt 2 root root 0 Jul 2 00:27 .
drwxr-xr-x 19 root root 4096 Jul 2 00:09 ..
-rw------- 1 root root 0 Jul 2 00:27 maps.debug
-rw------- 1 root root 0 Jul 2 00:27 progs.debug
The user mode driver will load BPF Type Formats, create BPF maps, populate BPF
maps, load two BPF programs, attach them to BPF iterators, and finally send two
bpf_link IDs back to the kernel.
The kernel will pin two bpf_links into newly mounted bpffs instance under
names "progs.debug" and "maps.debug". These two files become human readable.
$ cat /my/bpffs/progs.debug
id name attached
11 dump_bpf_map bpf_iter_bpf_map
12 dump_bpf_prog bpf_iter_bpf_prog
27 test_pkt_access
32 test_main test_pkt_access test_pkt_access
33 test_subprog1 test_pkt_access_subprog1 test_pkt_access
34 test_subprog2 test_pkt_access_subprog2 test_pkt_access
35 test_subprog3 test_pkt_access_subprog3 test_pkt_access
36 new_get_skb_len get_skb_len test_pkt_access
37 new_get_skb_ifindex get_skb_ifindex test_pkt_access
38 new_get_constant get_constant test_pkt_access
The BPF program dump_bpf_prog() in iterators.bpf.c is printing this data about
all BPF programs currently loaded in the system. This information is unstable
and will change from kernel to kernel as ".debug" suffix conveys.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200819042759.51280-4-alexei.starovoitov@gmail.com
Implement two relocations of a new enumerator value-based CO-RE relocation
kind: ENUMVAL_EXISTS and ENUMVAL_VALUE.
First, ENUMVAL_EXISTS, allows to detect the presence of a named enumerator
value in the target (kernel) BTF. This is useful to do BPF helper/map/program
type support detection from BPF program side. bpf_core_enum_value_exists()
macro helper is provided to simplify built-in usage.
Second, ENUMVAL_VALUE, allows to capture enumerator integer value and relocate
it according to the target BTF, if it changes. This is useful to have
a guarantee against intentional or accidental re-ordering/re-numbering of some
of the internal (non-UAPI) enumerations, where kernel developers don't care
about UAPI backwards compatiblity concerns. bpf_core_enum_value() allows to
capture this succinctly and use correct enum values in code.
LLVM uses ldimm64 instruction to capture enumerator value-based relocations,
so add support for ldimm64 instruction patching as well.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200819194519.3375898-5-andriin@fb.com
Implement support for TYPE_EXISTS/TYPE_SIZE/TYPE_ID_LOCAL/TYPE_ID_REMOTE
relocations. These are examples of type-based relocations, as opposed to
field-based relocations supported already. The difference is that they are
calculating relocation values based on the type itself, not a field within
a struct/union.
Type-based relos have slightly different semantics when matching local types
to kernel target types, see comments in bpf_core_types_are_compat() for
details. Their behavior on failure to find target type in kernel BTF also
differs. Instead of "poisoning" relocatable instruction and failing load
subsequently in kernel, they return 0 (which is rarely a valid return result,
so user BPF code can use that to detect success/failure of the relocation and
deal with it without extra "guarding" relocations). Also, it's always possible
to check existence of the type in target kernel with TYPE_EXISTS relocation,
similarly to a field-based FIELD_EXISTS.
TYPE_ID_LOCAL relocation is a bit special in that it always succeeds (barring
any libbpf/Clang bugs) and resolved to BTF ID using **local** BTF info of BPF
program itself. Tests in subsequent patches demonstrate the usage and
semantics of new relocations.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200819194519.3375898-2-andriin@fb.com
It's trivial to handle missing ELF_C_MMAP_READ support in libelf the way that
objtool has solved it in
("774bec3fddcc objtool: Add fallback from ELF_C_READ_MMAP to ELF_C_READ").
So instead of having an entire feature detector for that, just do what objtool
does for perf and libbpf. And keep their Makefiles a bit simpler.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200819013607.3607269-5-andriin@fb.com
Most of libbpf source files already include libbpf_internal.h, so it's a good
place to centralize identifier poisoning. So move kernel integer type
poisoning there. And also add reallocarray to a poison list to prevent
accidental use of it. libbpf_reallocarray() should be used universally
instead.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200819013607.3607269-4-andriin@fb.com
Most netlink-related functions were unique to bpftool usage, so I moved them
into net.c. Few functions are still used by both bpftool and libbpf itself
internally, so I've copy-pasted them (libbpf_nl_get_link,
libbpf_netlink_open). It's a bit of duplication of code, but better separation
of libbpf as a library with public API and bpftool, relying on unexposed
functions in libbpf.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200819013607.3607269-3-andriin@fb.com
Re-implement glibc's reallocarray() for libbpf internal-only use.
reallocarray(), unfortunately, is not available in all versions of glibc, so
requires extra feature detection and using reallocarray() stub from
<tools/libc_compat.h> and COMPAT_NEED_REALLOCARRAY. All this complicates build
of libbpf unnecessarily and is just a maintenance burden. Instead, it's
trivial to implement libbpf-specific internal version and use it throughout
libbpf.
Which is what this patch does, along with converting some realloc() uses that
should really have been reallocarray() in the first place.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200819013607.3607269-2-andriin@fb.com
Split the instruction patching logic into relocation value calculation and
application of relocation to instruction. Using this, evaluate relocation
against each matching candidate and validate that all candidates agree on
relocated value. If not, report ambiguity and fail load.
This logic is necessary to avoid dangerous (however unlikely) accidental match
against two incompatible candidate types. Without this change, libbpf will
pick a random type as *the* candidate and apply potentially invalid
relocation.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818223921.2911963-4-andriin@fb.com
Add logging of local/target type kind (struct/union/typedef/etc). Preserve
unresolved root type ID (for cases of typedef). Improve the format of CO-RE
reloc spec output format to contain only relevant and succinct info.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818223921.2911963-3-andriin@fb.com
Instead of printing out integer value of BTF kind, print out a string
representation of a kind.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818223921.2911963-2-andriin@fb.com
Detect whether a kernel supports any BTF at all, and if not, don't even
attempt loading BTF to avoid unnecessary log messages like:
libbpf: Error loading BTF: Invalid argument(22)
libbpf: Error loading .BTF into kernel: -22. BTF is optional, ignoring.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818213356.2629020-8-andriin@fb.com
Now that libbpf can automatically fallback to bpf_probe_read() on old kernels
not yet supporting bpf_probe_read_kernel(), switch libbpf BPF-side helper
macros to use appropriate BPF helper for reading kernel data.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20200818213356.2629020-7-andriin@fb.com
Add BPF program code sanitization pass, replacing calls to BPF
bpf_probe_read_{kernel,user}[_str]() helpers with bpf_probe_read[_str](), if
libbpf detects that kernel doesn't support new variants.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818213356.2629020-5-andriin@fb.com
Factor out common piece of logic that detects support for a feature based on
successfully created FD. Also take care of closing FD, if it was created.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818213356.2629020-4-andriin@fb.com
Turn libbpf's kernel feature probing into lazily-performed checks. This allows
to skip performing unnecessary feature checks, if a given BPF application
doesn't rely on a particular kernel feature. As we grow number of feature
probes, libbpf might perform less unnecessary syscalls and scale better with
number of feature probes long-term.
By decoupling feature checks from bpf_object, it's also possible to perform
feature probing from libbpf static helpers and low-level APIs, if necessary.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818213356.2629020-3-andriin@fb.com
On ppc64le we get the following warning:
In file included from btf_dump.c:16:0:
btf_dump.c: In function ‘btf_dump_emit_struct_def’:
../include/linux/kernel.h:20:17: error: comparison of distinct pointer types lacks a cast [-Werror]
(void) (&_max1 == &_max2); \
^
btf_dump.c:882:11: note: in expansion of macro ‘max’
m_sz = max(0LL, btf__resolve_size(d->btf, m->type));
^~~
Fix by explicitly casting to __s64, which is a return type from
btf__resolve_size().
Fixes: 702eddc77a ("libbpf: Handle GCC built-in types for Arm NEON")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200818164456.1181661-1-andriin@fb.com
With libbpf and BTF it is pretty common to have libbpf built for one
architecture, while BTF information was generated for a different architecture
(typically, but not always, BPF). In such case, the size of a pointer might
differ betweem architectures. libbpf previously was always making an
assumption that pointer size for BTF is the same as native architecture
pointer size, but that breaks for cases where libbpf is built as 32-bit
library, while BTF is for 64-bit architecture.
To solve this, add heuristic to determine pointer size by searching for `long`
or `unsigned long` integer type and using its size as a pointer size. Also,
allow to override the pointer size with a new API btf__set_pointer_size(), for
cases where application knows which pointer size should be used. User
application can check what libbpf "guessed" by looking at the result of
btf__pointer_size(). If it's not 0, then libbpf successfully determined a
pointer size, otherwise native arch pointer size will be used.
For cases where BTF is parsed from ELF file, use ELF's class (32-bit or
64-bit) to determine pointer size.
Fixes: 8a138aed4a ("bpf: btf: Add BTF support to libbpf")
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-5-andriin@fb.com
Libbpf built in 32-bit mode should be careful about not conflating 64-bit BPF
pointers in BPF ELF file and host architecture pointers. This patch fixes
issue of incorrect initializating of map-in-map inner map slots due to such
difference.
Fixes: 646f02ffdd ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-4-andriin@fb.com
Turns out there were a few more instances where libbpf didn't save the
errno before writing an error message, causing errno to be overridden by
the printf() return and the error disappearing if logging is enabled.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200813142905.160381-1-toke@redhat.com
When building Arm NEON (SIMD) code from lib/raid6/neon.uc, GCC emits
DWARF information using a base type "__Poly8_t", which is internal to
GCC and not recognized by Clang. This causes build failures when
building with Clang a vmlinux.h generated from an arm64 kernel that was
built with GCC.
vmlinux.h:47284:9: error: unknown type name '__Poly8_t'
typedef __Poly8_t poly8x16_t[16];
^~~~~~~~~
The polyX_t types are defined as unsigned integers in the "Arm C
Language Extension" document (101028_Q220_00_en). Emit typedefs based on
standard integer types for the GCC internal types, similar to those
emitted by Clang.
Including linux/kernel.h to use ARRAY_SIZE() incidentally redefined
max(), causing a build bug due to different types, hence the seemingly
unrelated change.
Reported-by: Jakov Petrina <jakov.petrina@sartura.hr>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200812143909.3293280-1-jean-philippe@linaro.org
Commit 5fbc220862 ("tools/libpf: Add offsetof/container_of macro
in bpf_helpers.h") added a macro offsetof() to get the offset of a
structure member:
#define offsetof(TYPE, MEMBER) ((size_t)&((TYPE *)0)->MEMBER)
In certain use cases, size_t type may not be available so
Commit da7a35062b ("libbpf bpf_helpers: Use __builtin_offsetof
for offsetof") changed to use __builtin_offsetof which removed
the dependency on type size_t, which I suggested.
But using __builtin_offsetof will prevent CO-RE relocation
generation in case that, e.g., TYPE is annotated with "preserve_access_info"
where a relocation is desirable in case the member offset is changed
in a different kernel version. So this patch reverted back to
the original macro but using "unsigned long" instead of "site_t".
Fixes: da7a35062b ("libbpf bpf_helpers: Use __builtin_offsetof for offsetof")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/bpf/20200811030852.3396929-1-yhs@fb.com
Recently, from commit 94a1fedd63 ("libbpf: Add btf__parse_raw() and
generic btf__parse() APIs"), new API has been added to libbpf that
allows to parse BTF from raw data file (btf__parse_raw()).
The commit derives build failure of samples/bpf due to improper access
of uninitialized pointer at btf_parse_raw().
btf.c: In function btf__parse_raw:
btf.c:625:28: error: btf may be used uninitialized in this function
625 | return err ? ERR_PTR(err) : btf;
| ~~~~~~~~~~~~~~~~~~~^~~~~
This commit fixes the build failure of samples/bpf by adding code of
initializing btf pointer as NULL.
Fixes: 94a1fedd63 ("libbpf: Add btf__parse_raw() and generic btf__parse() APIs")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200805223359.32109-1-danieltimlee@gmail.com
Previous commit adjusted kernel uapi for map
element bpf iterator. This patch adjusted libbpf API
due to uapi change. bpftool and bpf_iter selftests
are also changed accordingly.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200805055058.1457623-1-yhs@fb.com
Add public APIs to parse BTF from raw data file (e.g.,
/sys/kernel/btf/vmlinux), as well as generic btf__parse(), which will try to
determine correct format, currently either raw or ELF.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200802013219.864880-2-andriin@fb.com
The o32, n32 and n64 calling conventions require the return
value to be stored in $v0 which maps to $2 register, i.e.,
the register 2.
Fixes: c1932cd ("bpf: Add MIPS support to samples/bpf.")
Signed-off-by: Jerry Crunchtime <jerry.c.t@web.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/43707d31-0210-e8f0-9226-1af140907641@web.de
Most of libbpf "constructors" on failure return ERR_PTR(err) result encoded as
a pointer. It's a common mistake to eventually pass such malformed pointers
into xxx__destroy()/xxx__free() "destructors". So instead of fixing up
clean up code in selftests and user programs, handle such error pointers in
destructors themselves. This works beautifully for NULL pointers passed to
destructors, so might as well just work for error pointers.
Suggested-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200729232148.896125-1-andriin@fb.com
Sync UAPI header and add support for using bpf_link-based XDP attachment.
Make xdp/ prog type set expected attach type. Kernel didn't enforce
attach_type for XDP programs before, so there is no backwards compatiblity
issues there.
Also fix section_names selftest to recognize that xdp prog types now have
expected attach type.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200722064603.3350758-8-andriin@fb.com
The kernel prevents potential unwinder warnings and crashes by blocking
BPF program with bpf_get_[stack|stackid] on perf_event without
PERF_SAMPLE_CALLCHAIN, or with exclude_callchain_[kernel|user]. Print a
hint message in libbpf to help the user debug such issues.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723180648.1429892-4-songliubraving@fb.com
Add map_fd to bpf_iter_attach_opts and flags to
bpf_link_create_opts. Later on, bpftool or selftest
will be able to create a bpf map element iterator
by passing map_fd to the kernel during link
creation time.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184117.590673-1-yhs@fb.com
The non-builtin route for offsetof has a dependency on size_t from
stdlib.h/stdint.h that is undeclared and may break targets.
The offsetof macro in bpf_helpers may disable the same macro in other
headers that have a #ifdef offsetof guard. Rather than add additional
dependencies improve the offsetof macro declared here to use the
builtin that is available since llvm 3.7 (the first with a BPF backend).
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200720061741.1514673-1-irogers@google.com
Make libbpf aware of the newly added program type, and assign it a
section name.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200717103536.397595-13-jakub@cloudflare.com
As for DEVMAP, support SEC("xdp_cpumap/") as a short cut for loading
the program with type BPF_PROG_TYPE_XDP and expected attach type
BPF_XDP_CPUMAP.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/33174c41993a6d860d9c7c1f280a2477ee39ed11.1594734381.git.lorenzo@kernel.org
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-07-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 36 non-merge commits during the last 7 day(s) which contain
a total of 62 files changed, 2242 insertions(+), 468 deletions(-).
The main changes are:
1) Avoid trace_printk warning banner by switching bpf_trace_printk to use
its own tracing event, from Alan.
2) Better libbpf support on older kernels, from Andrii.
3) Additional AF_XDP stats, from Ciara.
4) build time resolution of BTF IDs, from Jiri.
5) BPF_CGROUP_INET_SOCK_RELEASE hook, from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Reliably remove all the type modifiers from read-only (.rodata) global
variable definitions, including cases of inner field const modifiers and
arrays of const values.
Also modify one of selftests to ensure that const volatile struct doesn't
prevent user-space from modifying .rodata variable.
Fixes: 985ead416d ("bpftool: Add skeleton codegen command")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200713232409.3062144-3-andriin@fb.com
One important use case when emitting const/volatile/restrict is undesirable is
BPF skeleton generation of DATASEC layout. These are further memory-mapped and
can be written/read from user-space directly.
For important case of .rodata variables, bpftool strips away first-level
modifiers, to make their use on user-space side simple and not requiring extra
type casts to override compiler complaining about writing to const variables.
This logic works mostly fine, but breaks in some more complicated cases. E.g.:
const volatile int params[10];
Because in BTF it's a chain of ARRAY -> CONST -> VOLATILE -> INT, bpftool
stops at ARRAY and doesn't strip CONST and VOLATILE. In skeleton this variable
will be emitted as is. So when used from user-space, compiler will complain
about writing to const array. This is problematic, as also mentioned in [0].
To solve this for arrays and other non-trivial cases (e.g., inner
const/volatile fields inside the struct), teach btf_dump to strip away any
modifier, when requested. This is done as an extra option on
btf_dump__emit_type_decl() API.
Reported-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200713232409.3062144-2-andriin@fb.com
Coverity's static analysis helpfully reported a memory leak introduced by
0f0e55d824 ("libbpf: Improve BTF sanitization handling"). While fixing it,
I realized that btf__new() already creates a memory copy, so there is no need
to do this. So this patch also fixes misleading btf__new() signature to make
data into a `const void *` input parameter. And it avoids unnecessary memory
allocation and copy in BTF sanitization code altogether.
Fixes: 0f0e55d824 ("libbpf: Improve BTF sanitization handling")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200710011023.1655008-1-andriin@fb.com
On ILP32, 64-bit result was shifted by value calculated for 32-bit long type
and returned value was much outside hashmap capacity.
As advised by Andrii Nakryiko, this patch uses different hashing variant for
architectures with size_t shorter than long long.
Fixes: e3b9242240 ("libbpf: add resizable non-thread safe internal hashmap")
Signed-off-by: Jakub Bogusz <qboosh@pld-linux.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200709225723.1069937-1-andriin@fb.com
perf_buffer__new() is relying on BPF_OBJ_GET_INFO_BY_FD availability for few
sanity checks. OBJ_GET_INFO for maps is actually much more recent feature than
perf_buffer support itself, so this causes unnecessary problems on old kernels
before BPF_OBJ_GET_INFO_BY_FD was added.
This patch makes those sanity checks optional and just assumes best if command
is not supported. If user specified something incorrectly (e.g., wrong map
type), kernel will reject it later anyway, except user won't get a nice
explanation as to why it failed. This seems like a good trade off for
supporting perf_buffer on old kernels.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-6-andriin@fb.com
Change sanitization process to preserve original BTF, which might be used by
libbpf itself for Kconfig externs, CO-RE relocs, etc, even if kernel is old
and doesn't support BTF. To achieve that, if libbpf detects the need for BTF
sanitization, it would clone original BTF, sanitize it in-place, attempt to
load it into kernel, and if successful, will preserve loaded BTF FD in
original `struct btf`, while freeing sanitized local copy.
If kernel doesn't support any BTF, original btf and btf_ext will still be
preserved to be used later for CO-RE relocation and other BTF-dependent libbpf
features, which don't dependon kernel BTF support.
Patch takes care to not specify BTF and BTF.ext features when loading BPF
programs and/or maps, if it was detected that kernel doesn't support BTF
features.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-4-andriin@fb.com
Add setter for BTF FD to allow application more fine-grained control in more
advanced scenarios. Storing BTF FD inside `struct btf` provides little benefit
and probably would be better done differently (e.g., btf__load() could just
return FD on success), but we are stuck with this due to backwards
compatibility. The main problem is that it's impossible to load BTF and than
free user-space memory, but keep FD intact, because `struct btf` assumes
ownership of that FD upon successful load and will attempt to close it during
btf__free(). To allow callers (e.g., libbpf itself for BTF sanitization) to
have more control over this, add btf__set_fd() to allow to reset FD
arbitrarily, if necessary.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-3-andriin@fb.com
With valid ELF and valid BTF, there is no reason (apart from bugs) why BTF
finalization should fail. So make it strict and return error if it fails. This
makes CO-RE relocation more reliable, as they are not going to be just
silently skipped, if BTF finalization failed.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200708015318.3827358-2-andriin@fb.com
Add auto-detection for the cgroup/sock_release programs.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200706230128.4073544-3-sdf@google.com
Make bpf_endian.h compatible with vmlinux.h. It is a frequent request from
users wanting to use bpf_endian.h in their BPF applications using CO-RE and
vmlinux.h.
To achieve that, re-implement byte swap macros and drop all the header
includes. This way it can be used both with linux header includes, as well as
with a vmlinux.h.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200630152125.3631920-2-andriin@fb.com
Currently, bpf_object__load() (and by induction skeleton's load), will always
attempt to prepare, relocate, and load into kernel every single BPF program
found inside the BPF object file. This is often convenient and the right thing
to do and what users expect.
But there are plenty of cases (especially with BPF development constantly
picking up the pace), where BPF application is intended to work with old
kernels, with potentially reduced set of features. But on kernels supporting
extra features, it would like to take a full advantage of them, by employing
extra BPF program. This could be a choice of using fentry/fexit over
kprobe/kretprobe, if kernel is recent enough and is built with BTF. Or BPF
program might be providing optimized bpf_iter-based solution that user-space
might want to use, whenever available. And so on.
With libbpf and BPF CO-RE in particular, it's advantageous to not have to
maintain two separate BPF object files to achieve this. So to enable such use
cases, this patch adds ability to request not auto-loading chosen BPF
programs. In such case, libbpf won't attempt to perform relocations (which
might fail due to old kernel), won't try to resolve BTF types for
BTF-aware (tp_btf/fentry/fexit/etc) program types, because BTF might not be
present, and so on. Skeleton will also automatically skip auto-attachment step
for such not loaded BPF programs.
Overall, this feature allows to simplify development and deployment of
real-world BPF applications with complicated compatibility requirements.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200625232629.3444003-2-andriin@fb.com
Adjust the SEC("xdp_devmap/") prog type prefix to contain a
slash "/" for expected attach type BPF_XDP_DEVMAP. This is consistent
with other prog types like tracing.
Fixes: 2778797037 ("libbpf: Add SEC name for xdp programs attached to device map")
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159309521882.821855.6873145686353617509.stgit@firesoul
Prevent loading/parsing vmlinux BTF twice in some cases: for CO-RE relocations
and for BTF-aware hooks (tp_btf, fentry/fexit, etc).
Fixes: a6ed02cac6 ("libbpf: Load btf_vmlinux only once per object.")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200624043805.1794620-1-andriin@fb.com
bpf_object__find_program_by_title(), used by CO-RE relocation code, doesn't
return .text "BPF program", if it is a function storage for sub-programs.
Because of that, any CO-RE relocation in helper non-inlined functions will
fail. Fix this by searching for .text-corresponding BPF program manually.
Adjust one of bpf_iter selftest to exhibit this pattern.
Fixes: ddc7c30426 ("libbpf: implement BPF CO-RE offset relocation algorithm")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200619230423.691274-1-andriin@fb.com
Add support for another (in addition to existing Kconfig) special kind of
externs in BPF code, kernel symbol externs. Such externs allow BPF code to
"know" kernel symbol address and either use it for comparisons with kernel
data structures (e.g., struct file's f_op pointer, to distinguish different
kinds of file), or, with the help of bpf_probe_user_kernel(), to follow
pointers and read data from global variables. Kernel symbol addresses are
found through /proc/kallsyms, which should be present in the system.
Currently, such kernel symbol variables are typeless: they have to be defined
as `extern const void <symbol>` and the only operation you can do (in C code)
with them is to take its address. Such extern should reside in a special
section '.ksyms'. bpf_helpers.h header provides __ksym macro for this. Strong
vs weak semantics stays the same as with Kconfig externs. If symbol is not
found in /proc/kallsyms, this will be a failure for strong (non-weak) extern,
but will be defaulted to 0 for weak externs.
If the same symbol is defined multiple times in /proc/kallsyms, then it will
be error if any of the associated addresses differs. In that case, address is
ambiguous, so libbpf falls on the side of caution, rather than confusing user
with randomly chosen address.
In the future, once kernel is extended with variables BTF information, such
ksym externs will be supported in a typed version, which will allow BPF
program to read variable's contents directly, similarly to how it's done for
fentry/fexit input arguments.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-3-andriin@fb.com
Switch existing Kconfig externs to be just one of few possible kinds of more
generic externs. This refactoring is in preparation for ksymbol extern
support, added in the follow up patch. There are no functional changes
intended.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-2-andriin@fb.com
Add a bunch of getter for various aspects of BPF map. Some of these attribute
(e.g., key_size, value_size, type, etc) are available right now in struct
bpf_map_def, but this patch adds getter allowing to fetch them individually.
bpf_map_def approach isn't very scalable, when ABI stability requirements are
taken into account. It's much easier to extend libbpf and add support for new
features, when each aspect of BPF map has separate getter/setter.
Getters follow the common naming convention of not explicitly having "get" in
its name: bpf_map__type() returns map type, bpf_map__key_size() returns
key_size. Setters, though, explicitly have set in their name:
bpf_map__set_type(), bpf_map__set_key_size().
This patch ensures we now have a getter and a setter for the following
map attributes:
- type;
- max_entries;
- map_flags;
- numa_node;
- key_size;
- value_size;
- ifindex.
bpf_map__resize() enforces unnecessary restriction of max_entries > 0. It is
unnecessary, because libbpf actually supports zero max_entries for some cases
(e.g., for PERF_EVENT_ARRAY map) and treats it specially during map creation
time. To allow setting max_entries=0, new bpf_map__set_max_entries() setter is
added. bpf_map__resize()'s behavior is preserved for backwards compatibility
reasons.
Map ifindex getter is added as well. There is a setter already, but no
corresponding getter. Fix this assymetry as well. bpf_map__set_ifindex()
itself is converted from void function into error-returning one, similar to
other setters. The only error returned right now is -EBUSY, if BPF map is
already loaded and has corresponding FD.
One lacking attribute with no ability to get/set or even specify it
declaratively is numa_node. This patch fixes this gap and both adds
programmatic getter/setter, as well as adds support for numa_node field in
BTF-defined map.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200621062112.3006313-1-andriin@fb.com
Systems that doesn't yet have the very latest linux/bpf.h header, enum
bpf_stats_type will be undefined, causing compilation warnings. Prevents this
by forward-declaring enum.
Fixes: 0bee106716 ("libbpf: Add support for command BPF_ENABLE_STATS")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200621031159.2279101-1-andriin@fb.com
Remove invalid assumption in libbpf that .bss map doesn't have to be updated
in kernel. With addition of skeleton and memory-mapped initialization image,
.bss doesn't have to be all zeroes when BPF map is created, because user-code
might have initialized those variables from user-space.
Fixes: eba9c5f498 ("libbpf: Refactor global data map initialization")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200612194504.557844-1-andriin@fb.com
Handle a GCC quirk of emitting extra volatile modifier in DWARF (and
subsequently preserved in BTF by pahole) for function pointers marked as
__attribute__((noreturn)). This was the way to mark such functions before GCC
2.5 added noreturn attribute. Drop such func_proto modifiers, similarly to how
it's done for array (also to handle GCC quirk/bug).
Such volatile attribute is emitted by GCC only, so existing selftests can't
express such test. Simple repro is like this (compiled with GCC + BTF
generated by pahole):
struct my_struct {
void __attribute__((noreturn)) (*fn)(int);
};
struct my_struct a;
Without this fix, output will be:
struct my_struct {
voidvolatile (*fn)(int);
};
With the fix:
struct my_struct {
void (*fn)(int);
};
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/bpf/20200610052335.2862559-1-andriin@fb.com
Add bpf_program__attach_nets(), which uses LINK_CREATE subcommand to create
an FD-based kernel bpf_link, for attach types tied to network namespace,
that is BPF_FLOW_DISSECTOR for the moment.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-7-jakub@cloudflare.com
On systems with recent enough glibc, reallocarray compat won't kick in, so
reallocarray() itself has to come from stdlib.h include. But _GNU_SOURCE is
necessary to enable it. So add it.
Fixes: bf99c936f9 ("libbpf: Add BPF ring buffer support")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200601202601.2139477-1-andriin@fb.com
Support SEC("xdp_devmap*") as a short cut for loading the program with
type BPF_PROG_TYPE_XDP and expected attach type BPF_XDP_DEVMAP.
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200529220716.75383-5-dsahern@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Declaring and instantiating BPF ring buffer doesn't require any changes to
libbpf, as it's just another type of maps. So using existing BTF-defined maps
syntax with __uint(type, BPF_MAP_TYPE_RINGBUF) and __uint(max_elements,
<size-of-ring-buf>) is all that's necessary to create and use BPF ring buffer.
This patch adds BPF ring buffer consumer to libbpf. It is very similar to
perf_buffer implementation in terms of API, but also attempts to fix some
minor problems and inconveniences with existing perf_buffer API.
ring_buffer support both single ring buffer use case (with just using
ring_buffer__new()), as well as allows to add more ring buffers, each with its
own callback and context. This allows to efficiently poll and consume
multiple, potentially completely independent, ring buffers, using single
epoll instance.
The latter is actually a problem in practice for applications
that are using multiple sets of perf buffers. They have to create multiple
instances for struct perf_buffer and poll them independently or in a loop,
each approach having its own problems (e.g., inability to use a common poll
timeout). struct ring_buffer eliminates this problem by aggregating many
independent ring buffer instances under the single "ring buffer manager".
Second, perf_buffer's callback can't return error, so applications that need
to stop polling due to error in data or data signalling the end, have to use
extra mechanisms to signal that polling has to stop. ring_buffer's callback
can return error, which will be passed through back to user code and can be
acted upon appropariately.
Two APIs allow to consume ring buffer data:
- ring_buffer__poll(), which will wait for data availability notification
and will consume data only from reported ring buffer(s); this API allows
to efficiently use resources by reading data only when it becomes
available;
- ring_buffer__consume(), will attempt to read new records regardless of
data availablity notification sub-system. This API is useful for cases
when lowest latency is required, in expense of burning CPU resources.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-3-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In case the cpu_bufs are sparsely allocated they are not all
free'ed. These changes will fix this.
Fixes: fb84b82246 ("libbpf: add perf buffer API")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159056888305.330763.9684536967379110349.stgit@ebuild
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since dynamic symbols are used for dynamic linking it makes sense to
use them (readelf --dyn-syms) for abi check.
Found with some configuration on powerpc where linker puts
local *.plt_call.* symbols into .so.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200525061846.16524-1-yauheni.kaliuta@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current 'make install' results in only pkg-config and library binaries
being installed. For consistency also install headers as part of
"make install"
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200526174612.5447-1-nborisov@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This new API, perf_buffer__consume, can be used as follows:
- When you have a perf ring where wakeup_events is higher than 1,
and you have remaining data in the rings you would like to pull
out on exit (or maybe based on a timeout).
- For low latency cases where you burn a CPU that constantly polls
the queues.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159048487929.89441.7465713173442594608.stgit@ebuild
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Trivial patch to add the new get{peer,sock}name attach types to the section
definitions in order to hook them up to sock_addr cgroup program type.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/7fcd4b1e41a8ebb364754a5975c75a7795051bd2.1589841594.git.daniel@iogearbox.net
Fixes the following warnings:
hashmap.c: In function ‘hashmap__clear’:
hashmap.h:150:20: error: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare]
150 | for (bkt = 0; bkt < map->cap; bkt++) \
hashmap.c: In function ‘hashmap_grow’:
hashmap.h:150:20: error: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare]
150 | for (bkt = 0; bkt < map->cap; bkt++) \
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200515165007.217120-4-irogers@google.com
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
This is to be consistent with tracing and lsm programs
which have prefix "bpf_trace_" and "bpf_lsm_" respectively.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200513180216.2949387-1-yhs@fb.com
When the probe code was failing for any reason ENOTSUP was returned, even
if this was due to not having enough lock space. This patch fixes this by
returning EPERM to the user application, so it can respond and increase
the RLIMIT_MEMLOCK size.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/158927424896.2342.10402475603585742943.stgit@ebuild
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200507185057.GA13981@embeddedor
These two helpers will be used later in bpf_iter bpf program
bpf_iter_netlink.c. Put them in bpf_helpers.h since they could
be useful in other cases.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175919.2477104-1-yhs@fb.com
Two new libbpf APIs are added to support bpf_iter:
- bpf_program__attach_iter
Given a bpf program and additional parameters, which is
none now, returns a bpf_link.
- bpf_iter_create
syscall level API to create a bpf iterator.
The macro BPF_SEQ_PRINTF are also introduced. The format
looks like:
BPF_SEQ_PRINTF(seq, "task id %d\n", pid);
This macro can help bpf program writers with
nicer bpf_seq_printf syntax similar to the kernel one.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175917.2476936-1-yhs@fb.com
Some versions of GCC falsely detect that vi might not be initialized. That's
not true, but let's silence it with NULL initialization.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200430021436.1522502-1-andriin@fb.com
Fix memory leak in hashmap_clear() not freeing hashmap_entry structs for each
of the remaining entries. Also NULL-out bucket list to prevent possible
double-free between hashmap__clear() and hashmap__free().
Running test_progs-asan flavor clearly showed this problem.
Reported-by: Alston Tang <alston64@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-5-andriin@fb.com
As discussed at LPC 2019 ([0]), this patch brings (a quite belated) support
for declarative BTF-defined map-in-map support in libbpf. It allows to define
ARRAY_OF_MAPS and HASH_OF_MAPS BPF maps without any user-space initialization
code involved.
Additionally, it allows to initialize outer map's slots with references to
respective inner maps at load time, also completely declaratively.
Despite a weak type system of C, the way BTF-defined map-in-map definition
works, it's actually quite hard to accidentally initialize outer map with
incompatible inner maps. This being C, of course, it's still possible, but
even that would be caught at load time and error returned with helpful debug
log pointing exactly to the slot that failed to be initialized.
As an example, here's a rather advanced HASH_OF_MAPS declaration and
initialization example, filling slots #0 and #4 with two inner maps:
#include <bpf/bpf_helpers.h>
struct inner_map {
__uint(type, BPF_MAP_TYPE_ARRAY);
__uint(max_entries, 1);
__type(key, int);
__type(value, int);
} inner_map1 SEC(".maps"),
inner_map2 SEC(".maps");
struct outer_hash {
__uint(type, BPF_MAP_TYPE_HASH_OF_MAPS);
__uint(max_entries, 5);
__uint(key_size, sizeof(int));
__array(values, struct inner_map);
} outer_hash SEC(".maps") = {
.values = {
[0] = &inner_map2,
[4] = &inner_map1,
},
};
Here's the relevant part of libbpf debug log showing pretty clearly of what's
going on with map-in-map initialization:
libbpf: .maps relo #0: for 6 value 0 rel.r_offset 96 name 260 ('inner_map1')
libbpf: .maps relo #0: map 'outer_arr' slot [0] points to map 'inner_map1'
libbpf: .maps relo #1: for 7 value 32 rel.r_offset 112 name 249 ('inner_map2')
libbpf: .maps relo #1: map 'outer_arr' slot [2] points to map 'inner_map2'
libbpf: .maps relo #2: for 7 value 32 rel.r_offset 144 name 249 ('inner_map2')
libbpf: .maps relo #2: map 'outer_hash' slot [0] points to map 'inner_map2'
libbpf: .maps relo #3: for 6 value 0 rel.r_offset 176 name 260 ('inner_map1')
libbpf: .maps relo #3: map 'outer_hash' slot [4] points to map 'inner_map1'
libbpf: map 'inner_map1': created successfully, fd=4
libbpf: map 'inner_map2': created successfully, fd=5
libbpf: map 'outer_hash': created successfully, fd=7
libbpf: map 'outer_hash': slot [0] set to map 'inner_map2' fd=5
libbpf: map 'outer_hash': slot [4] set to map 'inner_map1' fd=4
Notice from the log above that fd=6 (not logged explicitly) is used for inner
"prototype" map, necessary for creation of outer map. It is destroyed
immediately after outer map is created.
See also included selftest with some extra comments explaining extra details
of usage. Additionally, similar initialization syntax and libbpf functionality
can be used to do initialization of BPF_PROG_ARRAY with references to BPF
sub-programs. This can be done in follow up patches, if there will be a demand
for this.
[0] https://linuxplumbersconf.org/event/4/contributions/448/
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200429002739.48006-4-andriin@fb.com
Factor out map creation and destruction logic to simplify code and especially
error handling. Also fix map FD leak in case of partially successful map
creation during bpf_object load operation.
Fixes: 57a00f4164 ("libbpf: Add auto-pinning of maps when loading BPF objects")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200429002739.48006-3-andriin@fb.com
